diff options
Diffstat (limited to 'arch')
34 files changed, 88 insertions, 118 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index d9a13ccf89a3..ab6d701365bb 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -556,7 +556,7 @@ endmenu # "ARC Architecture Configuration" config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "12" if ARC_HUGEPAGE_16M - default "11" + default "11" if ARC_HUGEPAGE_16M + default "10" source "kernel/power/Kconfig" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e24a9820e12f..929e646e84b9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1355,9 +1355,9 @@ config ARM_MODULE_PLTS config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "12" if SOC_AM33XX - default "9" if SA1111 - default "11" + default "11" if SOC_AM33XX + default "8" if SA1111 + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -1366,9 +1366,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - config ALIGNMENT_TRAP def_bool CPU_CP15_MMU select HAVE_PROC_CPU if PROC_FS diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6dc6fed12af8..345a67e67dbd 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y CONFIG_SMP=y CONFIG_ARM_PSCI=y CONFIG_HIGHMEM=y -CONFIG_ARCH_FORCE_MAX_ORDER=14 +CONFIG_ARCH_FORCE_MAX_ORDER=13 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig index bd29e5012cb0..385ad0f391a8 100644 --- a/arch/arm/configs/milbeaut_m10v_defconfig +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set # CONFIG_ARM_PATCH_IDIV is not set CONFIG_HIGHMEM=y -CONFIG_ARCH_FORCE_MAX_ORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=11 CONFIG_SECCOMP=y CONFIG_KEXEC=y CONFIG_EFI=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index 70a67b3fc91b..90779812c6dd 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y CONFIG_MACH_OX820=y CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_ARCH_FORCE_MAX_ORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=11 CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index e656d3af2266..b46e39369dbb 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -20,7 +20,7 @@ CONFIG_PXA_SHARPSL=y CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y CONFIG_AEABI=y -CONFIG_ARCH_FORCE_MAX_ORDER=9 +CONFIG_ARCH_FORCE_MAX_ORDER=8 CONFIG_CMDLINE="root=/dev/ram0 ro" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 0d964c613d71..954112041403 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y # CONFIG_CACHE_L2X0 is not set # CONFIG_ARM_PATCH_IDIV is not set # CONFIG_CPU_SW_DOMAIN_PAN is not set -CONFIG_ARCH_FORCE_MAX_ORDER=15 +CONFIG_ARCH_FORCE_MAX_ORDER=14 CONFIG_UACCESS_WITH_MEMCPY=y # CONFIG_ATAGS is not set CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel" diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig index 5bca2eb59b86..c6448ac860b6 100644 --- a/arch/arm/configs/sp7021_defconfig +++ b/arch/arm/configs/sp7021_defconfig @@ -17,7 +17,7 @@ CONFIG_ARCH_SUNPLUS=y # CONFIG_VDSO is not set CONFIG_SMP=y CONFIG_THUMB2_KERNEL=y -CONFIG_ARCH_FORCE_MAX_ORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=11 CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1023e896d46b..cb5c6aa3254e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1476,22 +1476,22 @@ config XEN # include/linux/mmzone.h requires the following to be true: # -# MAX_ORDER - 1 + PAGE_SHIFT <= SECTION_SIZE_BITS +# MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS # -# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS + 1 - PAGE_SHIFT: +# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT: # # | SECTION_SIZE_BITS | PAGE_SHIFT | max MAX_ORDER | default MAX_ORDER | # ----+-------------------+--------------+-----------------+--------------------+ -# 4K | 27 | 12 | 16 | 11 | -# 16K | 27 | 14 | 14 | 12 | -# 64K | 29 | 16 | 14 | 14 | +# 4K | 27 | 12 | 15 | 10 | +# 16K | 27 | 14 | 13 | 11 | +# 64K | 29 | 16 | 13 | 13 | config ARCH_FORCE_MAX_ORDER int "Maximum zone order" if ARM64_4K_PAGES || ARM64_16K_PAGES - default "14" if ARM64_64K_PAGES - range 12 14 if ARM64_16K_PAGES - default "12" if ARM64_16K_PAGES - range 11 16 if ARM64_4K_PAGES - default "11" + default "13" if ARM64_64K_PAGES + range 11 13 if ARM64_16K_PAGES + default "11" if ARM64_16K_PAGES + range 10 15 if ARM64_4K_PAGES + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -1500,14 +1500,11 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - We make sure that we can allocate up to a HugePage size for each configuration. Hence we have : - MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2 + MAX_ORDER = PMD_SHIFT - PAGE_SHIFT => PAGE_SHIFT - 3 - However for 4K, we choose a higher default value, 11 as opposed to 10, giving us + However for 4K, we choose a higher default value, 10 as opposed to 9, giving us 4M allocations matching the default size used by generic code. config UNMAP_KERNEL_AT_EL0 diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h index 4b73463423c3..5f5437621029 100644 --- a/arch/arm64/include/asm/sparsemem.h +++ b/arch/arm64/include/asm/sparsemem.h @@ -10,7 +10,7 @@ /* * Section size must be at least 512MB for 64K base * page size config. Otherwise it will be less than - * (MAX_ORDER - 1) and the build process will fail. + * MAX_ORDER and the build process will fail. */ #ifdef CONFIG_ARM64_64K_PAGES #define SECTION_SIZE_BITS 29 diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h index 0a048dc06a7d..fe5472a184a3 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h +++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h @@ -16,7 +16,7 @@ struct hyp_pool { * API at EL2. */ hyp_spinlock_t lock; - struct list_head free_area[MAX_ORDER]; + struct list_head free_area[MAX_ORDER + 1]; phys_addr_t range_start; phys_addr_t range_end; unsigned short max_order; diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c index 803ba3222e75..b1e392186a0f 100644 --- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c +++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c @@ -110,7 +110,7 @@ static void __hyp_attach_page(struct hyp_pool *pool, * after coalescing, so make sure to mark it HYP_NO_ORDER proactively. */ p->order = HYP_NO_ORDER; - for (; (order + 1) < pool->max_order; order++) { + for (; (order + 1) <= pool->max_order; order++) { buddy = __find_buddy_avail(pool, p, order); if (!buddy) break; @@ -203,9 +203,9 @@ void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order) hyp_spin_lock(&pool->lock); /* Look for a high-enough-order page */ - while (i < pool->max_order && list_empty(&pool->free_area[i])) + while (i <= pool->max_order && list_empty(&pool->free_area[i])) i++; - if (i >= pool->max_order) { + if (i > pool->max_order) { hyp_spin_unlock(&pool->lock); return NULL; } @@ -228,8 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages, int i; hyp_spin_lock_init(&pool->lock); - pool->max_order = min(MAX_ORDER, get_order((nr_pages + 1) << PAGE_SHIFT)); - for (i = 0; i < pool->max_order; i++) + pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT)); + for (i = 0; i <= pool->max_order; i++) INIT_LIST_HEAD(&pool->free_area[i]); pool->range_start = phys; pool->range_end = phys + (nr_pages << PAGE_SHIFT); diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig index dba02da6fa34..c694fac43bed 100644 --- a/arch/csky/Kconfig +++ b/arch/csky/Kconfig @@ -334,7 +334,7 @@ config HIGHMEM config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "11" + default "10" config DRAM_BASE hex "DRAM start addr (the same with memory-section in dts)" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d7e4a24e8644..0d2f41fa56ee 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -202,10 +202,10 @@ config IA64_CYCLONE If you're unsure, answer N. config ARCH_FORCE_MAX_ORDER - int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE - range 11 17 if !HUGETLB_PAGE - default "17" if HUGETLB_PAGE - default "11" + int "MAX_ORDER (10 - 16)" if !HUGETLB_PAGE + range 10 16 if !HUGETLB_PAGE + default "16" if HUGETLB_PAGE + default "10" config SMP bool "Symmetric multi-processing support" diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h index 84e8ce387b69..a58f8b466d96 100644 --- a/arch/ia64/include/asm/sparsemem.h +++ b/arch/ia64/include/asm/sparsemem.h @@ -12,9 +12,9 @@ #define SECTION_SIZE_BITS (30) #define MAX_PHYSMEM_BITS (50) #ifdef CONFIG_ARCH_FORCE_MAX_ORDER -#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) +#if (CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT > SECTION_SIZE_BITS) #undef SECTION_SIZE_BITS -#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) +#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT) #endif #endif diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index 380d2f3966c9..e8dd4323fb86 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -170,7 +170,7 @@ static int __init hugetlb_setup_sz(char *str) size = memparse(str, &str); if (*str || !is_power_of_2(size) || !(tr_pages & size) || size <= PAGE_SIZE || - size >= (1UL << PAGE_SHIFT << MAX_ORDER)) { + size > (1UL << PAGE_SHIFT << MAX_ORDER)) { printk(KERN_WARNING "Invalid huge page size specified\n"); return 1; } diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 7fd51257e0ed..272a3a12c98d 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -420,12 +420,12 @@ config NODES_SHIFT config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - range 14 64 if PAGE_SIZE_64KB - default "14" if PAGE_SIZE_64KB - range 12 64 if PAGE_SIZE_16KB - default "12" if PAGE_SIZE_16KB - range 11 64 - default "11" + range 13 63 if PAGE_SIZE_64KB + default "13" if PAGE_SIZE_64KB + range 11 63 if PAGE_SIZE_16KB + default "11" if PAGE_SIZE_16KB + range 10 63 + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -434,9 +434,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - The page size is not necessarily 4KB. Keep this in mind when choosing a value for this option. diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 9380f6e3bb66..c9df6572133f 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -400,7 +400,7 @@ config SINGLE_MEMORY_CHUNK config ARCH_FORCE_MAX_ORDER int "Maximum zone order" if ADVANCED depends on !SINGLE_MEMORY_CHUNK - default "11" + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -413,9 +413,6 @@ config ARCH_FORCE_MAX_ORDER value also defines the minimal size of the hole that allows freeing unused memory map. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - config 060_WRITETHROUGH bool "Use write-through caching for 68060 supervisor accesses" depends on ADVANCED && M68060 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e2f3ca73f40d..3e8b765b8c7b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2137,14 +2137,14 @@ endchoice config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB - default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB - range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB - default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB - range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB - default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB - range 0 64 - default "11" + range 13 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + range 12 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + range 11 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB + default "11" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB + range 0 63 + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -2153,9 +2153,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - The page size is not necessarily 4KB. Keep this in mind when choosing a value for this option. diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index a582f72104f3..89708b95978c 100644 --- a/arch/nios2/Kconfig +++ b/arch/nios2/Kconfig @@ -46,8 +46,8 @@ source "kernel/Kconfig.hz" config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - range 9 20 - default "11" + range 8 19 + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -56,9 +56,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - endmenu source "arch/nios2/platform/Kconfig.platform" diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 49c6d36b2b3e..24d56536b269 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -897,18 +897,18 @@ config DATA_SHIFT config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - range 8 9 if PPC64 && PPC_64K_PAGES - default "9" if PPC64 && PPC_64K_PAGES - range 13 13 if PPC64 && !PPC_64K_PAGES - default "13" if PPC64 && !PPC_64K_PAGES - range 9 64 if PPC32 && PPC_16K_PAGES - default "9" if PPC32 && PPC_16K_PAGES - range 7 64 if PPC32 && PPC_64K_PAGES - default "7" if PPC32 && PPC_64K_PAGES - range 5 64 if PPC32 && PPC_256K_PAGES - default "5" if PPC32 && PPC_256K_PAGES - range 11 64 - default "11" + range 7 8 if PPC64 && PPC_64K_PAGES + default "8" if PPC64 && PPC_64K_PAGES + range 12 12 if PPC64 && !PPC_64K_PAGES + default "12" if PPC64 && !PPC_64K_PAGES + range 8 63 if PPC32 && PPC_16K_PAGES + default "8" if PPC32 && PPC_16K_PAGES + range 6 63 if PPC32 && PPC_64K_PAGES + default "6" if PPC32 && PPC_64K_PAGES + range 4 63 if PPC32 && PPC_256K_PAGES + default "4" if PPC32 && PPC_256K_PAGES + range 10 63 + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -917,9 +917,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - The page size is not necessarily 4KB. For example, on 64-bit systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep this in mind when choosing a value for this option. diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index ea719898b581..6cb7e90d52c1 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -30,7 +30,7 @@ CONFIG_PREEMPT=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_ARCH_FORCE_MAX_ORDER=17 +CONFIG_ARCH_FORCE_MAX_ORDER=16 CONFIG_PCI=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config index ab8a8c4530d9..3009b0efaf34 100644 --- a/arch/powerpc/configs/fsl-emb-nonhw.config +++ b/arch/powerpc/configs/fsl-emb-nonhw.config @@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y CONFIG_FONT_8x16=y CONFIG_FONT_8x8=y CONFIG_FONTS=y -CONFIG_ARCH_FORCE_MAX_ORDER=13 +CONFIG_ARCH_FORCE_MAX_ORDER=12 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAME_WARN=1024 CONFIG_FTL=y diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c index 7fcfba162e0d..81d7185e2ae8 100644 --- a/arch/powerpc/mm/book3s64/iommu_api.c +++ b/arch/powerpc/mm/book3s64/iommu_api.c @@ -97,7 +97,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua, } mmap_read_lock(mm); - chunk = (1UL << (PAGE_SHIFT + MAX_ORDER - 1)) / + chunk = (1UL << (PAGE_SHIFT + MAX_ORDER)) / sizeof(struct vm_area_struct *); chunk = min(chunk, entries); for (entry = 0; entry < entries; entry += chunk) { diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index f1ba8d1e8c1a..b900933507da 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -615,7 +615,7 @@ void __init gigantic_hugetlb_cma_reserve(void) order = mmu_psize_to_shift(MMU_PAGE_16G) - PAGE_SHIFT; if (order) { - VM_WARN_ON(order < MAX_ORDER); + VM_WARN_ON(order <= MAX_ORDER); hugetlb_cma_reserve(order); } } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 4f6e20a35aa1..5a81f106068e 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1740,7 +1740,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe) * DMA window can be larger than available memory, which will * cause errors later. */ - const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1); + const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER); /* * We create the default window as big as we can. The constraint is diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index b52e14ccb450..4d655e8d4d74 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_CPU_SUBTYPE_SH7724=y -CONFIG_ARCH_FORCE_MAX_ORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=11 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_FLATMEM_MANUAL=y CONFIG_SH_ECOVEC=y diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 411fdc0901f7..40271090bd7d 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,13 +20,13 @@ config PAGE_OFFSET config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - range 9 64 if PAGE_SIZE_16KB - default "9" if PAGE_SIZE_16KB - range 7 64 if PAGE_SIZE_64KB - default "7" if PAGE_SIZE_64KB - range 11 64 - default "14" if !MMU - default "11" + range 8 63 if PAGE_SIZE_16KB + default "8" if PAGE_SIZE_16KB + range 6 63 if PAGE_SIZE_64KB + default "6" if PAGE_SIZE_64KB + range 10 63 + default "13" if !MMU + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -35,9 +35,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - The page size is not necessarily 4KB. Keep this in mind when choosing a value for this option. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 84437a4c6545..e3242bf5a8df 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -271,7 +271,7 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "13" + default "12" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -280,9 +280,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 13 means that the largest free memory block is 2^12 pages. - if SPARC64 || COMPILE_TEST source "kernel/power/Kconfig" endif diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 384480971805..7d91ca6aa675 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -193,7 +193,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size, size = IO_PAGE_ALIGN(size); order = get_order(size); - if (unlikely(order >= MAX_ORDER)) + if (unlikely(order > MAX_ORDER)) return NULL; npages = size >> IO_PAGE_SHIFT; diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c index 5b4de4a89dec..08ffd17d5ec3 100644 --- a/arch/sparc/kernel/traps_64.c +++ b/arch/sparc/kernel/traps_64.c @@ -897,7 +897,7 @@ void __init cheetah_ecache_flush_init(void) /* Now allocate error trap reporting scoreboard. */ sz = NR_CPUS * (2 * sizeof(struct cheetah_err_info)); - for (order = 0; order < MAX_ORDER; order++) { + for (order = 0; order <= MAX_ORDER; order++) { if ((PAGE_SIZE << order) >= sz) break; } diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c index dba8dffe2113..5e2931a18409 100644 --- a/arch/sparc/mm/tsb.c +++ b/arch/sparc/mm/tsb.c @@ -402,8 +402,8 @@ void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long rss) unsigned long new_rss_limit; gfp_t gfp_flags; - if (max_tsb_size > (PAGE_SIZE << (MAX_ORDER - 1))) - max_tsb_size = (PAGE_SIZE << (MAX_ORDER - 1)); + if (max_tsb_size > PAGE_SIZE << MAX_ORDER) + max_tsb_size = PAGE_SIZE << MAX_ORDER; new_cache_index = 0; for (new_size = 8192; new_size < max_tsb_size; new_size <<= 1UL) { diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 5e5a9c8e0e5d..8dcda617b8bf 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -368,10 +368,10 @@ int __init linux_main(int argc, char **argv) max_physmem = TASK_SIZE - uml_physmem - iomem_size - MIN_VMALLOC; /* - * Zones have to begin on a 1 << MAX_ORDER-1 page boundary, + * Zones have to begin on a 1 << MAX_ORDER page boundary, * so this makes sure that's true for highmem */ - max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER - 1)) - 1); + max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER)) - 1); if (physmem_size + iomem_size > max_physmem) { highmem = physmem_size + iomem_size - max_physmem; physmem_size -= highmem; diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index bcb0c5d2abc2..3eee334ba873 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -773,7 +773,7 @@ config HIGHMEM config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "11" + default "10" help The kernel memory allocator divides physically contiguous memory blocks into "zones", where each zone is a power of two number of @@ -782,9 +782,6 @@ config ARCH_FORCE_MAX_ORDER blocks of physically contiguous memory, then you may need to increase this value. - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - endmenu menu "Power management options" |