diff options
Diffstat (limited to 'arch/x86_64/kernel/acpi/wakeup.S')
| -rw-r--r-- | arch/x86_64/kernel/acpi/wakeup.S | 286 |
1 files changed, 107 insertions, 179 deletions
diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S index 185faa911db5..8550a6ffa275 100644 --- a/arch/x86_64/kernel/acpi/wakeup.S +++ b/arch/x86_64/kernel/acpi/wakeup.S @@ -1,6 +1,7 @@ .text #include <linux/linkage.h> #include <asm/segment.h> +#include <asm/pgtable.h> #include <asm/page.h> #include <asm/msr.h> @@ -30,22 +31,28 @@ wakeup_code: cld # setup data segment movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ds # Make ds:0 point to wakeup_start movw %ax, %ss - mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board + # Private stack is needed for ASUS board + mov $(wakeup_stack - wakeup_code), %sp - pushl $0 # Kill any dangerous flags + pushl $0 # Kill any dangerous flags popfl movl real_magic - wakeup_code, %eax cmpl $0x12345678, %eax jne bogus_real_magic + call verify_cpu # Verify the cpu supports long + # mode + testl %eax, %eax + jnz no_longmode + testl $1, video_flags - wakeup_code jz 1f lcall $0xc000,$3 movw %cs, %ax - movw %ax, %ds # Bios might have played with that + movw %ax, %ds # Bios might have played with that movw %ax, %ss 1: @@ -61,12 +68,15 @@ wakeup_code: movb $0xa2, %al ; outb %al, $0x80 - lidt %ds:idt_48a - wakeup_code - xorl %eax, %eax - movw %ds, %ax # (Convert %ds:gdt to a linear ptr) - shll $4, %eax - addl $(gdta - wakeup_code), %eax - movl %eax, gdt_48a +2 - wakeup_code + mov %ds, %ax # Find 32bit wakeup_code addr + movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) + shll $4, %esi + # Fix up the vectors + addl %esi, wakeup_32_vector - wakeup_code + addl %esi, wakeup_long64_vector - wakeup_code + addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer + + lidtl %ds:idt_48a - wakeup_code lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is # appropriate @@ -75,86 +85,63 @@ wakeup_code: jmp 1f 1: - .byte 0x66, 0xea # prefix + jmpi-opcode - .long wakeup_32 - __START_KERNEL_map - .word __KERNEL_CS + ljmpl *(wakeup_32_vector - wakeup_code) + + .balign 4 +wakeup_32_vector: + .long wakeup_32 - wakeup_code + .word __KERNEL32_CS, 0 .code32 wakeup_32: # Running in this code, but at low address; paging is not yet turned on. movb $0xa5, %al ; outb %al, $0x80 - /* Check if extended functions are implemented */ - movl $0x80000000, %eax - cpuid - cmpl $0x80000000, %eax - jbe bogus_cpu - wbinvd - mov $0x80000001, %eax - cpuid - btl $29, %edx - jnc bogus_cpu - movl %edx,%edi - - movw $__KERNEL_DS, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs - - movw $__KERNEL_DS, %ax - movw %ax, %ss + movl $__KERNEL_DS, %eax + movl %eax, %ds - mov $(wakeup_stack - __START_KERNEL_map), %esp - movl saved_magic - __START_KERNEL_map, %eax - cmpl $0x9abcdef0, %eax - jne bogus_32_magic + movw $0x0e00 + 'i', %ds:(0xb8012) + movb $0xa8, %al ; outb %al, $0x80; /* * Prepare for entering 64bits mode */ - /* Enable PAE mode and PGE */ + /* Enable PAE */ xorl %eax, %eax btsl $5, %eax - btsl $7, %eax movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ - movl $(wakeup_level4_pgt - __START_KERNEL_map), %eax + leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax movl %eax, %cr3 - /* Setup EFER (Extended Feature Enable Register) */ - movl $MSR_EFER, %ecx - rdmsr - /* Fool rdmsr and reset %eax to avoid dependences */ - xorl %eax, %eax + /* Check if nx is implemented */ + movl $0x80000001, %eax + cpuid + movl %edx,%edi + /* Enable Long Mode */ + xorl %eax, %eax btsl $_EFER_LME, %eax - /* Enable System Call */ - btsl $_EFER_SCE, %eax - /* No Execute supported? */ + /* No Execute supported? */ btl $20,%edi jnc 1f btsl $_EFER_NX, %eax -1: /* Make changes effective */ +1: movl $MSR_EFER, %ecx + xorl %edx, %edx wrmsr - wbinvd xorl %eax, %eax btsl $31, %eax /* Enable paging and in turn activate Long Mode */ btsl $0, %eax /* Enable protected mode */ - btsl $1, %eax /* Enable MP */ - btsl $4, %eax /* Enable ET */ - btsl $5, %eax /* Enable NE */ - btsl $16, %eax /* Enable WP */ - btsl $18, %eax /* Enable AM */ /* Make changes effective */ movl %eax, %cr0 + /* At this point: CR4.PAE must be 1 CS.L must be 0 @@ -162,11 +149,6 @@ wakeup_32: Next instruction must be a branch This must be on identity-mapped page */ - jmp reach_compatibility_mode -reach_compatibility_mode: - movw $0x0e00 + 'i', %ds:(0xb8012) - movb $0xa8, %al ; outb %al, $0x80; - /* * At this point we're in long mode but in 32bit compatibility mode * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn @@ -174,24 +156,19 @@ reach_compatibility_mode: * the new gdt/idt that has __KERNEL_CS with CS.L = 1. */ - movw $0x0e00 + 'n', %ds:(0xb8014) - movb $0xa9, %al ; outb %al, $0x80 - - /* Load new GDT with the 64bit segment using 32bit descriptor */ - movl $(pGDT32 - __START_KERNEL_map), %eax - lgdt (%eax) - - movl $(wakeup_jumpvector - __START_KERNEL_map), %eax /* Finally jump in 64bit mode */ - ljmp *(%eax) + ljmp *(wakeup_long64_vector - wakeup_code)(%esi) -wakeup_jumpvector: - .long wakeup_long64 - __START_KERNEL_map - .word __KERNEL_CS + .balign 4 +wakeup_long64_vector: + .long wakeup_long64 - wakeup_code + .word __KERNEL_CS, 0 .code64 - /* Hooray, we are in Long 64-bit mode (but still running in low memory) */ + /* Hooray, we are in Long 64-bit mode (but still running in + * low memory) + */ wakeup_long64: /* * We must switch to a new descriptor in kernel space for the GDT @@ -199,7 +176,15 @@ wakeup_long64: * addresses where we're currently running on. We have to do that here * because in 32bit we couldn't load a 64bit linear address. */ - lgdt cpu_gdt_descr - __START_KERNEL_map + lgdt cpu_gdt_descr + + movw $0x0e00 + 'n', %ds:(0xb8014) + movb $0xa9, %al ; outb %al, $0x80 + + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic movw $0x0e00 + 'u', %ds:(0xb8016) @@ -211,75 +196,58 @@ wakeup_long64: movw %ax, %es movw %ax, %fs movw %ax, %gs - movq saved_esp, %rsp + movq saved_rsp, %rsp movw $0x0e00 + 'x', %ds:(0xb8018) - movq saved_ebx, %rbx - movq saved_edi, %rdi - movq saved_esi, %rsi - movq saved_ebp, %rbp + movq saved_rbx, %rbx + movq saved_rdi, %rdi + movq saved_rsi, %rsi + movq saved_rbp, %rbp movw $0x0e00 + '!', %ds:(0xb801a) - movq saved_eip, %rax + movq saved_rip, %rax jmp *%rax .code32 .align 64 gdta: + /* Its good to keep gdt in sync with one in trampoline.S */ .word 0, 0, 0, 0 # dummy - - .word 0, 0, 0, 0 # unused - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9B00 # code read/exec. ??? Why I need 0x9B00 (as opposed to 0x9A00 in order for this to work?) - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -# this is 64bit descriptor for code - .word 0xFFFF - .word 0 - .word 0x9A00 # code read/exec - .word 0x00AF # as above, but it is long mode and with D=0 + /* ??? Why I need the accessed bit set in order for this to work? */ + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS idt_48a: .word 0 # idt limit = 0 .word 0, 0 # idt base = 0L gdt_48a: - .word 0x8000 # gdt limit=2048, + .word 0x800 # gdt limit=2048, # 256 GDT entries - .word 0, 0 # gdt base (filled in later) - + .long gdta - wakeup_code # gdt base (relocated in later) -real_save_gdt: .word 0 - .quad 0 real_magic: .quad 0 video_mode: .quad 0 video_flags: .quad 0 +.code16 bogus_real_magic: - movb $0xba,%al ; outb %al,$0x80 + movb $0xba,%al ; outb %al,$0x80 jmp bogus_real_magic -bogus_32_magic: +.code64 +bogus_64_magic: movb $0xb3,%al ; outb %al,$0x80 - jmp bogus_32_magic + jmp bogus_64_magic -bogus_31_magic: - movb $0xb1,%al ; outb %al,$0x80 - jmp bogus_31_magic - -bogus_cpu: - movb $0xbc,%al ; outb %al,$0x80 - jmp bogus_cpu +.code16 +no_longmode: + movb $0xbc,%al ; outb %al,$0x80 + jmp no_longmode +#include "../verify_cpu.S" /* This code uses an extended set of video mode numbers. These include: * Aliases for standard modes @@ -301,6 +269,7 @@ bogus_cpu: #define VIDEO_FIRST_V7 0x0900 # Setting of user mode (AX=mode ID) => CF=success +.code16 mode_seta: movw %ax, %bx #if 0 @@ -346,21 +315,18 @@ check_vesaa: _setbada: jmp setbada - .code64 -bogus_magic: - movw $0x0e00 + 'B', %ds:(0xb8018) - jmp bogus_magic - -bogus_magic2: - movw $0x0e00 + '2', %ds:(0xb8018) - jmp bogus_magic2 - - wakeup_stack_begin: # Stack grows down .org 0xff0 wakeup_stack: # Just below end of page +.org 0x1000 +ENTRY(wakeup_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + ENTRY(wakeup_end) ## @@ -373,28 +339,11 @@ ENTRY(wakeup_end) # # Returned address is location of code in low memory (past data and stack) # + .code64 ENTRY(acpi_copy_wakeup_routine) pushq %rax - pushq %rcx pushq %rdx - sgdt saved_gdt - sidt saved_idt - sldt saved_ldt - str saved_tss - - movq %cr3, %rdx - movq %rdx, saved_cr3 - movq %cr4, %rdx - movq %rdx, saved_cr4 - movq %cr0, %rdx - movq %rdx, saved_cr0 - sgdt real_save_gdt - wakeup_start (,%rdi) - movl $MSR_EFER, %ecx - rdmsr - movl %eax, saved_efer - movl %edx, saved_efer2 - movl saved_video_mode, %edx movl %edx, video_mode - wakeup_start (,%rdi) movl acpi_video_flags, %edx @@ -403,21 +352,13 @@ ENTRY(acpi_copy_wakeup_routine) movq $0x123456789abcdef0, %rdx movq %rdx, saved_magic - movl saved_magic - __START_KERNEL_map, %eax - cmpl $0x9abcdef0, %eax - jne bogus_32_magic - - # make sure %cr4 is set correctly (features, etc) - movl saved_cr4 - __START_KERNEL_map, %eax - movq %rax, %cr4 + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic - movl saved_cr0 - __START_KERNEL_map, %eax - movq %rax, %cr0 - jmp 1f # Flush pipelines -1: # restore the regs we used popq %rdx - popq %rcx popq %rax ENTRY(do_suspend_lowlevel_s4bios) ret @@ -450,13 +391,13 @@ do_suspend_lowlevel: movq %r15, saved_context_r15(%rip) pushfq ; popq saved_context_eflags(%rip) - movq $.L97, saved_eip(%rip) + movq $.L97, saved_rip(%rip) - movq %rsp,saved_esp - movq %rbp,saved_ebp - movq %rbx,saved_ebx - movq %rdi,saved_edi - movq %rsi,saved_esi + movq %rsp,saved_rsp + movq %rbp,saved_rbp + movq %rbx,saved_rbx + movq %rdi,saved_rdi + movq %rsi,saved_rsi addq $8, %rsp movl $3, %edi @@ -503,25 +444,12 @@ do_suspend_lowlevel: .data ALIGN -ENTRY(saved_ebp) .quad 0 -ENTRY(saved_esi) .quad 0 -ENTRY(saved_edi) .quad 0 -ENTRY(saved_ebx) .quad 0 +ENTRY(saved_rbp) .quad 0 +ENTRY(saved_rsi) .quad 0 +ENTRY(saved_rdi) .quad 0 +ENTRY(saved_rbx) .quad 0 -ENTRY(saved_eip) .quad 0 -ENTRY(saved_esp) .quad 0 +ENTRY(saved_rip) .quad 0 +ENTRY(saved_rsp) .quad 0 ENTRY(saved_magic) .quad 0 - -ALIGN -# saved registers -saved_gdt: .quad 0,0 -saved_idt: .quad 0,0 -saved_ldt: .quad 0 -saved_tss: .quad 0 - -saved_cr0: .quad 0 -saved_cr3: .quad 0 -saved_cr4: .quad 0 -saved_efer: .quad 0 -saved_efer2: .quad 0 |