diff options
Diffstat (limited to 'arch/ppc64/kernel/mpic.h')
-rw-r--r-- | arch/ppc64/kernel/mpic.h | 273 |
1 files changed, 0 insertions, 273 deletions
diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h deleted file mode 100644 index ca78a7f10528..000000000000 --- a/arch/ppc64/kernel/mpic.h +++ /dev/null @@ -1,273 +0,0 @@ -#include <linux/irq.h> - -/* - * Global registers - */ - -#define MPIC_GREG_BASE 0x01000 - -#define MPIC_GREG_FEATURE_0 0x00000 -#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 -#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 -#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 -#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 -#define MPIC_GREG_FEATURE_VERSION_MASK 0xff -#define MPIC_GREG_FEATURE_1 0x00010 -#define MPIC_GREG_GLOBAL_CONF_0 0x00020 -#define MPIC_GREG_GCONF_RESET 0x80000000 -#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 -#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff -#define MPIC_GREG_GLOBAL_CONF_1 0x00030 -#define MPIC_GREG_VENDOR_0 0x00040 -#define MPIC_GREG_VENDOR_1 0x00050 -#define MPIC_GREG_VENDOR_2 0x00060 -#define MPIC_GREG_VENDOR_3 0x00070 -#define MPIC_GREG_VENDOR_ID 0x00080 -#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 -#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 -#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff -#define MPIC_GREG_PROCESSOR_INIT 0x00090 -#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 -#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 -#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 -#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 -#define MPIC_GREG_SPURIOUS 0x000e0 -#define MPIC_GREG_TIMER_FREQ 0x000f0 - -/* - * - * Timer registers - */ -#define MPIC_TIMER_BASE 0x01100 -#define MPIC_TIMER_STRIDE 0x40 - -#define MPIC_TIMER_CURRENT_CNT 0x00000 -#define MPIC_TIMER_BASE_CNT 0x00010 -#define MPIC_TIMER_VECTOR_PRI 0x00020 -#define MPIC_TIMER_DESTINATION 0x00030 - -/* - * Per-Processor registers - */ - -#define MPIC_CPU_THISBASE 0x00000 -#define MPIC_CPU_BASE 0x20000 -#define MPIC_CPU_STRIDE 0x01000 - -#define MPIC_CPU_IPI_DISPATCH_0 0x00040 -#define MPIC_CPU_IPI_DISPATCH_1 0x00050 -#define MPIC_CPU_IPI_DISPATCH_2 0x00060 -#define MPIC_CPU_IPI_DISPATCH_3 0x00070 -#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 -#define MPIC_CPU_TASKPRI_MASK 0x0000000f -#define MPIC_CPU_WHOAMI 0x00090 -#define MPIC_CPU_WHOAMI_MASK 0x0000001f -#define MPIC_CPU_INTACK 0x000a0 -#define MPIC_CPU_EOI 0x000b0 - -/* - * Per-source registers - */ - -#define MPIC_IRQ_BASE 0x10000 -#define MPIC_IRQ_STRIDE 0x00020 -#define MPIC_IRQ_VECTOR_PRI 0x00000 -#define MPIC_VECPRI_MASK 0x80000000 -#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ -#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 -#define MPIC_VECPRI_PRIORITY_SHIFT 16 -#define MPIC_VECPRI_VECTOR_MASK 0x000007ff -#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 -#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define MPIC_VECPRI_POLARITY_MASK 0x00800000 -#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 -#define MPIC_VECPRI_SENSE_EDGE 0x00000000 -#define MPIC_VECPRI_SENSE_MASK 0x00400000 -#define MPIC_IRQ_DESTINATION 0x00010 - -#define MPIC_MAX_IRQ_SOURCES 2048 -#define MPIC_MAX_CPUS 32 -#define MPIC_MAX_ISU 32 - -/* - * Special vector numbers (internal use only) - */ -#define MPIC_VEC_SPURRIOUS 255 -#define MPIC_VEC_IPI_3 254 -#define MPIC_VEC_IPI_2 253 -#define MPIC_VEC_IPI_1 252 -#define MPIC_VEC_IPI_0 251 - -/* unused */ -#define MPIC_VEC_TIMER_3 250 -#define MPIC_VEC_TIMER_2 249 -#define MPIC_VEC_TIMER_1 248 -#define MPIC_VEC_TIMER_0 247 - -/* Type definition of the cascade handler */ -typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); - -#ifdef CONFIG_MPIC_BROKEN_U3 -/* Fixup table entry */ -struct mpic_irq_fixup -{ - u8 __iomem *base; - unsigned int irq; -}; -#endif /* CONFIG_MPIC_BROKEN_U3 */ - - -/* The instance data of a given MPIC */ -struct mpic -{ - /* The "linux" controller struct */ - hw_irq_controller hc_irq; -#ifdef CONFIG_SMP - hw_irq_controller hc_ipi; -#endif - const char *name; - /* Flags */ - unsigned int flags; - /* How many irq sources in a given ISU */ - unsigned int isu_size; - unsigned int isu_shift; - unsigned int isu_mask; - /* Offset of irq vector numbers */ - unsigned int irq_offset; - unsigned int irq_count; - /* Offset of ipi vector numbers */ - unsigned int ipi_offset; - /* Number of sources */ - unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; - /* cascade handler */ - mpic_cascade_t cascade; - void *cascade_data; - unsigned int cascade_vec; - /* senses array */ - unsigned char *senses; - unsigned int senses_count; - -#ifdef CONFIG_MPIC_BROKEN_U3 - /* The fixup table */ - struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; -#endif - - /* The various ioremap'ed bases */ - volatile u32 __iomem *gregs; - volatile u32 __iomem *tmregs; - volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; - volatile u32 __iomem *isus[MPIC_MAX_ISU]; - - /* link */ - struct mpic *next; -}; - -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only - */ -#define MPIC_PRIMARY 0x00000001 -/* Set this for a big-endian MPIC */ -#define MPIC_BIG_ENDIAN 0x00000002 -/* Broken U3 MPIC */ -#define MPIC_BROKEN_U3 0x00000004 -/* Broken IPI registers (autodetected) */ -#define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 - -/* Allocate the controller structure and setup the linux irq descs - * for the range if interrupts passed in. No HW initialization is - * actually performed. - * - * @phys_addr: physial base address of the MPIC - * @flags: flags, see constants above - * @isu_size: number of interrupts in an ISU. Use 0 to use a - * standard ISU-less setup (aka powermac) - * @irq_offset: first irq number to assign to this mpic - * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 - * to match the number of sources - * @ipi_offset: first irq number to assign to this mpic IPI sources, - * used only on primary mpic - * @senses: array of sense values - * @senses_num: number of entries in the array - * - * Note about the sense array. If none is passed, all interrupts are - * setup to be level negative unless MPIC_BROKEN_U3 is set in which - * case they are edge positive (and the array is ignored anyway). - * The values in the array start at the first source of the MPIC, - * that is senses[0] correspond to linux irq "irq_offset". - */ -extern struct mpic *mpic_alloc(unsigned long phys_addr, - unsigned int flags, - unsigned int isu_size, - unsigned int irq_offset, - unsigned int irq_count, - unsigned int ipi_offset, - unsigned char *senses, - unsigned int senses_num, - const char *name); - -/* Assign ISUs, to call before mpic_init() - * - * @mpic: controller structure as returned by mpic_alloc() - * @isu_num: ISU number - * @phys_addr: physical address of the ISU - */ -extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - unsigned long phys_addr); - -/* Initialize the controller. After this has been called, none of the above - * should be called again for this mpic - */ -extern void mpic_init(struct mpic *mpic); - -/* Setup a cascade. Currently, only one cascade is supported this - * way, though you can always do a normal request_irq() and add - * other cascades this way. You should call this _after_ having - * added all the ISUs - * - * @irq_no: "linux" irq number of the cascade (that is offset'ed vector) - * @handler: cascade handler function - */ -extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder, - void *data); - -/* - * All of the following functions must only be used after the - * ISUs have been assigned and the controller fully initialized - * with mpic_init() - */ - - -/* Change/Read the priority of an interrupt. Default is 8 for irqs and - * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the - * IPI number is then the offset'ed (linux irq number mapped to the IPI) - */ -extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); -extern unsigned int mpic_irq_get_priority(unsigned int irq); - -/* Setup a non-boot CPU */ -extern void mpic_setup_this_cpu(void); - -/* Clean up for kexec (or cpu offline or ...) */ -extern void mpic_teardown_this_cpu(int secondary); - -/* Request IPIs on primary mpic */ -extern void mpic_request_ipis(void); - -/* Send an IPI (non offseted number 0..3) */ -extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); - -/* Fetch interrupt from a given mpic */ -extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); -/* This one gets to the primary mpic */ -extern int mpic_get_irq(struct pt_regs *regs); - -/* global mpic for pSeries */ -extern struct mpic *pSeries_mpic; |