diff options
Diffstat (limited to 'arch/powerpc')
130 files changed, 4296 insertions, 1800 deletions
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 5290df83ff30..69ce1026c948 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -359,6 +359,7 @@ compatible = "fsl,qoriq-core-mux-1.0"; clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; }; mux3: mux3@60 { diff --git a/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi new file mode 100644 index 000000000000..082ec2044060 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi @@ -0,0 +1,69 @@ +/* + * T2080 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t2081si-post.dtsi" + +&soc { +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi new file mode 100644 index 000000000000..97479f0ce630 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -0,0 +1,435 @@ +/* + * T2081 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t2080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x3000>; + fsl,portid-mapping = <0x8000>; + ranges = <0 0x20000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0"; + clock-output-names = "sysclk", "fixed-clock"; + }; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t2080-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t2080-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; +/include/ "elo3-dma-2.dtsi" + dma@102300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t2080-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sec5.2-0.dtsi" + + L2_1: l2-cache-controller@c20000 { + /* Cluster 0 L2 cache */ + compatible = "fsl,t2080-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi new file mode 100644 index 000000000000..e71ceb0e1100 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi @@ -0,0 +1,99 @@ +/* + * T2080/T2081 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + + crypto = &crypto; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index 793669baa13e..a3d582e0361a 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -476,6 +476,7 @@ /include/ "elo3-dma-0.dtsi" /include/ "elo3-dma-1.dtsi" +/include/ "elo3-dma-2.dtsi" /include/ "qoriq-espi-0.dtsi" spi@110000 { diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index d2f157edbe81..261a3abb1a55 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -57,6 +57,7 @@ pci3 = &pci3; dma0 = &dma0; dma1 = &dma1; + dma2 = &dma2; sdhc = &sdhc; }; diff --git a/arch/powerpc/boot/dts/t2080qds.dts b/arch/powerpc/boot/dts/t2080qds.dts new file mode 100644 index 000000000000..aa1d6d8c169b --- /dev/null +++ b/arch/powerpc/boot/dts/t2080qds.dts @@ -0,0 +1,57 @@ +/* + * T2080QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2080rdb.dts b/arch/powerpc/boot/dts/t2080rdb.dts new file mode 100644 index 000000000000..e8891047600c --- /dev/null +++ b/arch/powerpc/boot/dts/t2080rdb.dts @@ -0,0 +1,57 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xrdb.dtsi" + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2081qds.dts b/arch/powerpc/boot/dts/t2081qds.dts new file mode 100644 index 000000000000..8ec80a71e102 --- /dev/null +++ b/arch/powerpc/boot/dts/t2081qds.dts @@ -0,0 +1,46 @@ +/* + * T2081QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2081QDS"; + compatible = "fsl,T2081QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/t208xqds.dtsi new file mode 100644 index 000000000000..555dc6e03d89 --- /dev/null +++ b/arch/powerpc/boot/dts/t208xqds.dtsi @@ -0,0 +1,239 @@ +/* + * T2080/T2081 QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; /* 16MB */ + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <1>; + spi-max-frequency = <35000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64"; + reg = <2>; + spi-max-frequency = <35000000>; + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "at24,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "at24,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "at24,24c02"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom@55 { + compatible = "at24,24c02"; + reg = <0x55>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t208xrdb.dtsi b/arch/powerpc/boot/dts/t208xrdb.dtsi new file mode 100644 index 000000000000..1481e192e783 --- /dev/null +++ b/arch/powerpc/boot/dts/t208xrdb.dtsi @@ -0,0 +1,184 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t2080-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7481@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/t4240rdb.dts new file mode 100644 index 000000000000..53761d4e8c51 --- /dev/null +++ b/arch/powerpc/boot/dts/t4240rdb.dts @@ -0,0 +1,186 @@ +/* + * T4240RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t4240si-pre.dtsi" + +/ { + model = "fsl,T4240RDB"; + compatible = "fsl,T4240RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t4240si-post.dtsi" diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index 7c09f4861fe1..394da5500466 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -1,5 +1,5 @@ #ifndef _IO_H -#define __IO_H +#define _IO_H #include "types.h" diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index c19ff057d0f9..6a3c58adf253 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -139,8 +139,9 @@ CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS3232=y -CONFIG_RTC_DRV_CMOS=y CONFIG_UIO=y CONFIG_STAGING=y CONFIG_VIRT_DRIVERS=y @@ -179,3 +180,4 @@ CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_FSL_CORENET_CF=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 5c7fa19ae4ef..4b07bade1ba9 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -123,6 +123,10 @@ CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y +CONFIG_RTC_DRV_DS3232=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_DMADEVICES=y @@ -175,3 +179,4 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_FSL_CORENET_CF=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 55765c8cb08f..fa1bfd37f1ec 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -209,6 +209,9 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y +CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 5c6ecdc0f70e..0b452ebd8b3d 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -210,6 +210,9 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y +CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 0fdd7eece6d9..642e436d4595 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -195,8 +195,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN) -#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_SLB | MMU_FTR_TLBIEL | \ - MMU_FTR_16M_PAGE) +#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE) /* We only set the altivec features if the kernel was compiled with altivec * support @@ -268,10 +267,6 @@ extern const char *powerpc_base_platform; #define CPU_FTR_MAYBE_CAN_NAP 0 #endif -#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \ - !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \ - !defined(CONFIG_BOOKE)) - #define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) #define CPU_FTRS_603 (CPU_FTR_COMMON | \ @@ -396,15 +391,10 @@ extern const char *powerpc_base_platform; CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_CELL_TB_BUG) + CPU_FTR_CELL_TB_BUG | CPU_FTR_SMT) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ -#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \ - CPU_FTR_IABR | CPU_FTR_PPC_LE) -#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \ - CPU_FTR_IABR | \ - CPU_FTR_MMCRA | CPU_FTR_CTRL) #define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ | \ @@ -467,15 +457,14 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2) #else #define CPU_FTRS_POSSIBLE \ - (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ - CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \ - CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_VSX) + (CPU_FTRS_POWER4 | CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \ + CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \ + CPU_FTRS_POWER8 | CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_VSX) #endif #else enum { CPU_FTRS_POSSIBLE = -#if CLASSIC_PPC +#ifdef CONFIG_PPC_BOOK3S_32 CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | @@ -518,14 +507,14 @@ enum { #define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2) #else #define CPU_FTRS_ALWAYS \ - (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ - CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ - CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) + (CPU_FTRS_POWER4 & CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \ + CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \ + CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) #endif #else enum { CPU_FTRS_ALWAYS = -#if CLASSIC_PPC +#ifdef CONFIG_PPC_BOOK3S_32 CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index fab7743c2640..9983c3d26bca 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/string.h> #include <linux/time.h> +#include <linux/atomic.h> struct pci_dev; struct pci_bus; @@ -33,10 +34,11 @@ struct device_node; #ifdef CONFIG_EEH /* EEH subsystem flags */ -#define EEH_ENABLED 0x1 /* EEH enabled */ -#define EEH_FORCE_DISABLED 0x2 /* EEH disabled */ -#define EEH_PROBE_MODE_DEV 0x4 /* From PCI device */ -#define EEH_PROBE_MODE_DEVTREE 0x8 /* From device tree */ +#define EEH_ENABLED 0x01 /* EEH enabled */ +#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */ +#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */ +#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */ +#define EEH_ENABLE_IO_FOR_LOG 0x10 /* Enable IO for log */ /* * Delay for PE reset, all in ms @@ -84,7 +86,9 @@ struct eeh_pe { int freeze_count; /* Times of froze up */ struct timeval tstamp; /* Time on first-time freeze */ int false_positives; /* Times of reported #ff's */ + atomic_t pass_dev_cnt; /* Count of passed through devs */ struct eeh_pe *parent; /* Parent PE */ + void *data; /* PE auxillary data */ struct list_head child_list; /* Link PE to the child list */ struct list_head edevs; /* Link list of EEH devices */ struct list_head child; /* Child PEs */ @@ -93,6 +97,11 @@ struct eeh_pe { #define eeh_pe_for_each_dev(pe, edev, tmp) \ list_for_each_entry_safe(edev, tmp, &pe->edevs, list) +static inline bool eeh_pe_passed(struct eeh_pe *pe) +{ + return pe ? !!atomic_read(&pe->pass_dev_cnt) : false; +} + /* * The struct is used to trace EEH state for the associated * PCI device node or PCI device. In future, it might @@ -165,6 +174,11 @@ enum { #define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */ #define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */ #define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */ +#define EEH_PE_STATE_NORMAL 0 /* Normal state */ +#define EEH_PE_STATE_RESET 1 /* PE reset asserted */ +#define EEH_PE_STATE_STOPPED_IO_DMA 2 /* Frozen PE */ +#define EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA, Enabled IO */ +#define EEH_PE_STATE_UNAVAIL 5 /* Unavailable */ #define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */ #define EEH_RESET_HOT 1 /* Hot reset */ #define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */ @@ -194,36 +208,28 @@ extern int eeh_subsystem_flags; extern struct eeh_ops *eeh_ops; extern raw_spinlock_t confirm_error_lock; -static inline bool eeh_enabled(void) +static inline void eeh_add_flag(int flag) { - if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) || - !(eeh_subsystem_flags & EEH_ENABLED)) - return false; - - return true; + eeh_subsystem_flags |= flag; } -static inline void eeh_set_enable(bool mode) +static inline void eeh_clear_flag(int flag) { - if (mode) - eeh_subsystem_flags |= EEH_ENABLED; - else - eeh_subsystem_flags &= ~EEH_ENABLED; + eeh_subsystem_flags &= ~flag; } -static inline void eeh_probe_mode_set(int flag) +static inline bool eeh_has_flag(int flag) { - eeh_subsystem_flags |= flag; + return !!(eeh_subsystem_flags & flag); } -static inline int eeh_probe_mode_devtree(void) +static inline bool eeh_enabled(void) { - return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE); -} + if (eeh_has_flag(EEH_FORCE_DISABLED) || + !eeh_has_flag(EEH_ENABLED)) + return false; -static inline int eeh_probe_mode_dev(void) -{ - return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV); + return true; } static inline void eeh_serialize_lock(unsigned long *flags) @@ -243,6 +249,7 @@ static inline void eeh_serialize_unlock(unsigned long flags) #define EEH_MAX_ALLOWED_FREEZES 5 typedef void *(*eeh_traverse_func)(void *data, void *flag); +void eeh_set_pe_aux_size(int size); int eeh_phb_pe_create(struct pci_controller *phb); struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb); struct eeh_pe *eeh_pe_get(struct eeh_dev *edev); @@ -272,6 +279,13 @@ void eeh_add_device_late(struct pci_dev *); void eeh_add_device_tree_late(struct pci_bus *); void eeh_add_sysfs_files(struct pci_bus *); void eeh_remove_device(struct pci_dev *); +int eeh_dev_open(struct pci_dev *pdev); +void eeh_dev_release(struct pci_dev *pdev); +struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group); +int eeh_pe_set_option(struct eeh_pe *pe, int option); +int eeh_pe_get_state(struct eeh_pe *pe); +int eeh_pe_reset(struct eeh_pe *pe, int option); +int eeh_pe_configure(struct eeh_pe *pe); /** * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. @@ -295,8 +309,6 @@ static inline bool eeh_enabled(void) return false; } -static inline void eeh_set_enable(bool mode) { } - static inline int eeh_init(void) { return 0; diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 8f35cd7d59cc..77f52b26dad6 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -425,6 +425,8 @@ label##_relon_hv: \ #define SOFTEN_VALUE_0xa00 PACA_IRQ_DBELL #define SOFTEN_VALUE_0xe80 PACA_IRQ_DBELL #define SOFTEN_VALUE_0xe82 PACA_IRQ_DBELL +#define SOFTEN_VALUE_0xe60 PACA_IRQ_HMI +#define SOFTEN_VALUE_0xe62 PACA_IRQ_HMI #define __SOFTEN_TEST(h, vec) \ lbz r10,PACASOFTIRQEN(r13); \ @@ -513,8 +515,11 @@ label##_relon_hv: \ * runlatch, etc... */ -/* Exception addition: Hard disable interrupts */ -#define DISABLE_INTS RECONCILE_IRQ_STATE(r10,r11) +/* + * This addition reconciles our actual IRQ state with the various software + * flags that track it. This may call C code. + */ +#define ADD_RECONCILE RECONCILE_IRQ_STATE(r10,r11) #define ADD_NVGPRS \ bl save_nvgprs @@ -532,6 +537,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CTRL) .globl label##_common; \ label##_common: \ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + /* Volatile regs are potentially clobbered here */ \ additions; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ @@ -539,7 +545,7 @@ label##_common: \ #define STD_EXCEPTION_COMMON(trap, label, hdlr) \ EXCEPTION_COMMON(trap, label, hdlr, ret_from_except, \ - ADD_NVGPRS;DISABLE_INTS) + ADD_NVGPRS;ADD_RECONCILE) /* * Like STD_EXCEPTION_COMMON, but for exceptions that can occur @@ -548,7 +554,7 @@ label##_common: \ */ #define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \ EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \ - FINISH_NAP;DISABLE_INTS;RUNLATCH_ON) + FINISH_NAP;ADD_RECONCILE;RUNLATCH_ON) /* * When the idle code in power4_idle puts the CPU into NAP mode, diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h index 9361cd5342cc..f79d6c74eb2a 100644 --- a/arch/powerpc/include/asm/fs_pd.h +++ b/arch/powerpc/include/asm/fs_pd.h @@ -28,7 +28,6 @@ #ifdef CONFIG_8xx #include <asm/8xx_immap.h> -#include <asm/mpc8xx.h> extern immap_t __iomem *mpc8xx_immr; diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h index 418fb654370d..1bbb3013d6aa 100644 --- a/arch/powerpc/include/asm/hardirq.h +++ b/arch/powerpc/include/asm/hardirq.h @@ -11,6 +11,7 @@ typedef struct { unsigned int pmu_irqs; unsigned int mce_exceptions; unsigned int spurious_irqs; + unsigned int hmi_exceptions; #ifdef CONFIG_PPC_DOORBELL unsigned int doorbell_irqs; #endif diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 10be1dd01c6b..b59ac27a6b7d 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -25,6 +25,7 @@ #define PACA_IRQ_EE 0x04 #define PACA_IRQ_DEC 0x08 /* Or FIT */ #define PACA_IRQ_EE_EDGE 0x10 /* BookE only */ +#define PACA_IRQ_HMI 0x20 #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h index e20eb95429a8..f2149066fe5d 100644 --- a/arch/powerpc/include/asm/irqflags.h +++ b/arch/powerpc/include/asm/irqflags.h @@ -32,9 +32,8 @@ #endif /* - * Most of the CPU's IRQ-state tracing is done from assembly code; we - * have to call a C function so call a wrapper that saves all the - * C-clobbered registers. + * These are calls to C code, so the caller must be prepared for volatiles to + * be clobbered. */ #define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on) #define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off) @@ -42,6 +41,9 @@ /* * This is used by assembly code to soft-disable interrupts first and * reconcile irq state. + * + * NB: This may call C code, so the caller must be prepared for volatiles to + * be clobbered. */ #define RECONCILE_IRQ_STATE(__rA, __rB) \ lbz __rA,PACASOFTIRQEN(r13); \ diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h index f016bb699b5f..efbf9a322a23 100644 --- a/arch/powerpc/include/asm/jump_label.h +++ b/arch/powerpc/include/asm/jump_label.h @@ -10,6 +10,7 @@ * 2 of the License, or (at your option) any later version. */ +#ifndef __ASSEMBLY__ #include <linux/types.h> #include <asm/feature-fixups.h> @@ -42,4 +43,12 @@ struct jump_entry { jump_label_t key; }; +#else +#define ARCH_STATIC_BRANCH(LABEL, KEY) \ +1098: nop; \ + .pushsection __jump_table, "aw"; \ + FTR_ENTRY_LONG 1098b, LABEL, KEY; \ + .popsection +#endif + #endif /* _ASM_POWERPC_JUMP_LABEL_H */ diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index 9601741080e5..ecf7e133a4f2 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -98,6 +98,7 @@ #define BOOK3S_INTERRUPT_H_DATA_STORAGE 0xe00 #define BOOK3S_INTERRUPT_H_INST_STORAGE 0xe20 #define BOOK3S_INTERRUPT_H_EMUL_ASSIST 0xe40 +#define BOOK3S_INTERRUPT_HMI 0xe60 #define BOOK3S_INTERRUPT_H_DOORBELL 0xe80 #define BOOK3S_INTERRUPT_PERFMON 0xf00 #define BOOK3S_INTERRUPT_ALTIVEC 0xf20 diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index f92b0b54e921..44e90516519b 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -174,6 +174,10 @@ struct machdep_calls { /* Exception handlers */ int (*system_reset_exception)(struct pt_regs *regs); int (*machine_check_exception)(struct pt_regs *regs); + int (*handle_hmi_exception)(struct pt_regs *regs); + + /* Early exception handlers called in realmode */ + int (*hmi_exception_early)(struct pt_regs *regs); /* Called during machine check exception to retrive fixup address. */ bool (*mce_check_early_recovery)(struct pt_regs *regs); @@ -366,6 +370,7 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal) } \ __define_initcall(__machine_initcall_##mach##_##fn, id); +#define machine_early_initcall(mach, fn) __define_machine_initcall(mach, fn, early) #define machine_core_initcall(mach, fn) __define_machine_initcall(mach, fn, 1) #define machine_core_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 1s) #define machine_postcore_initcall(mach, fn) __define_machine_initcall(mach, fn, 2) diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index c2b4dcf23d03..d76514487d6f 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -25,26 +25,6 @@ #include <asm/processor.h> /* - * Segment table - */ - -#define STE_ESID_V 0x80 -#define STE_ESID_KS 0x20 -#define STE_ESID_KP 0x10 -#define STE_ESID_N 0x08 - -#define STE_VSID_SHIFT 12 - -/* Location of cpu0's segment table */ -#define STAB0_PAGE 0x8 -#define STAB0_OFFSET (STAB0_PAGE << 12) -#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START) - -#ifndef __ASSEMBLY__ -extern char initial_stab[]; -#endif /* ! __ASSEMBLY */ - -/* * SLB */ @@ -370,10 +350,8 @@ extern void hpte_init_lpar(void); extern void hpte_init_beat(void); extern void hpte_init_beat_v3(void); -extern void stabs_alloc(void); extern void slb_initialize(void); extern void slb_flush_and_rebolt(void); -extern void stab_initialize(unsigned long stab); extern void slb_vmalloc_update(void); extern void slb_set_size(u16 size); diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index e61f24ed4e65..3d5abfe6ba67 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -64,9 +64,9 @@ */ #define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000) -/* MMU is SLB-based +/* Doesn't support the B bit (1T segment) in SLBIE */ -#define MMU_FTR_SLB ASM_CONST(0x02000000) +#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x02000000) /* Support 16M large pages */ @@ -88,10 +88,6 @@ */ #define MMU_FTR_1T_SEGMENT ASM_CONST(0x40000000) -/* Doesn't support the B bit (1T segment) in SLBIE - */ -#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x80000000) - /* MMU feature bit sets for various CPUs */ #define MMU_FTRS_DEFAULT_HPTE_ARCH_V2 \ MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2 diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index b467530e2485..73382eba02dc 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -18,7 +18,6 @@ extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm); extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next); -extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); extern void set_context(unsigned long id, pgd_t *pgd); @@ -77,10 +76,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * sub architectures. */ #ifdef CONFIG_PPC_STD_MMU_64 - if (mmu_has_feature(MMU_FTR_SLB)) - switch_slb(tsk, next); - else - switch_stab(tsk, next); + switch_slb(tsk, next); #else /* Out of line for now */ switch_mmu_context(prev, next); diff --git a/arch/powerpc/include/asm/mpc85xx.h b/arch/powerpc/include/asm/mpc85xx.h index 736d4acc05a8..3bef74a9914b 100644 --- a/arch/powerpc/include/asm/mpc85xx.h +++ b/arch/powerpc/include/asm/mpc85xx.h @@ -77,6 +77,8 @@ #define SVR_T1020 0x852100 #define SVR_T1021 0x852101 #define SVR_T1022 0x852102 +#define SVR_T2080 0x853000 +#define SVR_T2081 0x853100 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h deleted file mode 100644 index 98f3c4f17328..000000000000 --- a/arch/powerpc/include/asm/mpc8xx.h +++ /dev/null @@ -1,12 +0,0 @@ -/* This is the single file included by all MPC8xx build options. - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8xx configuration, they all include - * this one and the configuration switching is done here. - */ -#ifndef __CONFIG_8xx_DEFS -#define __CONFIG_8xx_DEFS - -extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; - -#endif /* __CONFIG_8xx_DEFS */ diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 0da1dbd42e02..b2f8ce1fd0d7 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -147,6 +147,8 @@ struct opal_sg_list { #define OPAL_SET_PARAM 90 #define OPAL_DUMP_RESEND 91 #define OPAL_DUMP_INFO2 94 +#define OPAL_PCI_EEH_FREEZE_SET 97 +#define OPAL_HANDLE_HMI 98 #ifndef __ASSEMBLY__ @@ -170,7 +172,11 @@ enum OpalFreezeState { enum OpalEehFreezeActionToken { OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1, OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2, - OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3 + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3, + + OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1, + OPAL_EEH_ACTION_SET_FREEZE_DMA = 2, + OPAL_EEH_ACTION_SET_FREEZE_ALL = 3 }; enum OpalPciStatusToken { @@ -240,6 +246,7 @@ enum OpalMessageType { OPAL_MSG_MEM_ERR, OPAL_MSG_EPOW, OPAL_MSG_SHUTDOWN, + OPAL_MSG_HMI_EVT, OPAL_MSG_TYPE_MAX, }; @@ -340,6 +347,12 @@ enum OpalMveEnableAction { OPAL_ENABLE_MVE = 1 }; +enum OpalM64EnableAction { + OPAL_DISABLE_M64 = 0, + OPAL_ENABLE_M64_SPLIT = 1, + OPAL_ENABLE_M64_NON_SPLIT = 2 +}; + enum OpalPciResetScope { OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3, OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5, @@ -502,6 +515,50 @@ struct OpalMemoryErrorData { } u; }; +/* HMI interrupt event */ +enum OpalHMI_Version { + OpalHMIEvt_V1 = 1, +}; + +enum OpalHMI_Severity { + OpalHMI_SEV_NO_ERROR = 0, + OpalHMI_SEV_WARNING = 1, + OpalHMI_SEV_ERROR_SYNC = 2, + OpalHMI_SEV_FATAL = 3, +}; + +enum OpalHMI_Disposition { + OpalHMI_DISPOSITION_RECOVERED = 0, + OpalHMI_DISPOSITION_NOT_RECOVERED = 1, +}; + +enum OpalHMI_ErrType { + OpalHMI_ERROR_MALFUNC_ALERT = 0, + OpalHMI_ERROR_PROC_RECOV_DONE, + OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN, + OpalHMI_ERROR_PROC_RECOV_MASKED, + OpalHMI_ERROR_TFAC, + OpalHMI_ERROR_TFMR_PARITY, + OpalHMI_ERROR_HA_OVERFLOW_WARN, + OpalHMI_ERROR_XSCOM_FAIL, + OpalHMI_ERROR_XSCOM_DONE, + OpalHMI_ERROR_SCOM_FIR, + OpalHMI_ERROR_DEBUG_TRIG_FIR, + OpalHMI_ERROR_HYP_RESOURCE, +}; + +struct OpalHMIEvent { + uint8_t version; /* 0x00 */ + uint8_t severity; /* 0x01 */ + uint8_t type; /* 0x02 */ + uint8_t disposition; /* 0x03 */ + uint8_t reserved_1[4]; /* 0x04 */ + + __be64 hmer; + /* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */ + __be64 tfmr; +}; + enum { OPAL_P7IOC_DIAG_TYPE_NONE = 0, OPAL_P7IOC_DIAG_TYPE_RGC = 1, @@ -513,40 +570,40 @@ enum { }; struct OpalIoP7IOCErrorData { - uint16_t type; + __be16 type; /* GEM */ - uint64_t gemXfir; - uint64_t gemRfir; - uint64_t gemRirqfir; - uint64_t gemMask; - uint64_t gemRwof; + __be64 gemXfir; + __be64 gemRfir; + __be64 gemRirqfir; + __be64 gemMask; + __be64 gemRwof; /* LEM */ - uint64_t lemFir; - uint64_t lemErrMask; - uint64_t lemAction0; - uint64_t lemAction1; - uint64_t lemWof; + __be64 lemFir; + __be64 lemErrMask; + __be64 lemAction0; + __be64 lemAction1; + __be64 lemWof; union { struct OpalIoP7IOCRgcErrorData { - uint64_t rgcStatus; /* 3E1C10 */ - uint64_t rgcLdcp; /* 3E1C18 */ + __be64 rgcStatus; /* 3E1C10 */ + __be64 rgcLdcp; /* 3E1C18 */ }rgc; struct OpalIoP7IOCBiErrorData { - uint64_t biLdcp0; /* 3C0100, 3C0118 */ - uint64_t biLdcp1; /* 3C0108, 3C0120 */ - uint64_t biLdcp2; /* 3C0110, 3C0128 */ - uint64_t biFenceStatus; /* 3C0130, 3C0130 */ + __be64 biLdcp0; /* 3C0100, 3C0118 */ + __be64 biLdcp1; /* 3C0108, 3C0120 */ + __be64 biLdcp2; /* 3C0110, 3C0128 */ + __be64 biFenceStatus; /* 3C0130, 3C0130 */ - uint8_t biDownbound; /* BI Downbound or Upbound */ + u8 biDownbound; /* BI Downbound or Upbound */ }bi; struct OpalIoP7IOCCiErrorData { - uint64_t ciPortStatus; /* 3Dn008 */ - uint64_t ciPortLdcp; /* 3Dn010 */ + __be64 ciPortStatus; /* 3Dn008 */ + __be64 ciPortLdcp; /* 3Dn010 */ - uint8_t ciPort; /* Index of CI port: 0/1 */ + u8 ciPort; /* Index of CI port: 0/1 */ }ci; }; }; @@ -578,60 +635,60 @@ struct OpalIoPhbErrorCommon { struct OpalIoP7IOCPhbErrorData { struct OpalIoPhbErrorCommon common; - uint32_t brdgCtl; + __be32 brdgCtl; // P7IOC utl regs - uint32_t portStatusReg; - uint32_t rootCmplxStatus; - uint32_t busAgentStatus; + __be32 portStatusReg; + __be32 rootCmplxStatus; + __be32 busAgentStatus; // P7IOC cfg regs - uint32_t deviceStatus; - uint32_t slotStatus; - uint32_t linkStatus; - uint32_t devCmdStatus; - uint32_t devSecStatus; + __be32 deviceStatus; + __be32 slotStatus; + __be32 linkStatus; + __be32 devCmdStatus; + __be32 devSecStatus; // cfg AER regs - uint32_t rootErrorStatus; - uint32_t uncorrErrorStatus; - uint32_t corrErrorStatus; - uint32_t tlpHdr1; - uint32_t tlpHdr2; - uint32_t tlpHdr3; - uint32_t tlpHdr4; - uint32_t sourceId; + __be32 rootErrorStatus; + __be32 uncorrErrorStatus; + __be32 corrErrorStatus; + __be32 tlpHdr1; + __be32 tlpHdr2; + __be32 tlpHdr3; + __be32 tlpHdr4; + __be32 sourceId; - uint32_t rsv3; + __be32 rsv3; // Record data about the call to allocate a buffer. - uint64_t errorClass; - uint64_t correlator; + __be64 errorClass; + __be64 correlator; //P7IOC MMIO Error Regs - uint64_t p7iocPlssr; // n120 - uint64_t p7iocCsr; // n110 - uint64_t lemFir; // nC00 - uint64_t lemErrorMask; // nC18 - uint64_t lemWOF; // nC40 - uint64_t phbErrorStatus; // nC80 - uint64_t phbFirstErrorStatus; // nC88 - uint64_t phbErrorLog0; // nCC0 - uint64_t phbErrorLog1; // nCC8 - uint64_t mmioErrorStatus; // nD00 - uint64_t mmioFirstErrorStatus; // nD08 - uint64_t mmioErrorLog0; // nD40 - uint64_t mmioErrorLog1; // nD48 - uint64_t dma0ErrorStatus; // nD80 - uint64_t dma0FirstErrorStatus; // nD88 - uint64_t dma0ErrorLog0; // nDC0 - uint64_t dma0ErrorLog1; // nDC8 - uint64_t dma1ErrorStatus; // nE00 - uint64_t dma1FirstErrorStatus; // nE08 - uint64_t dma1ErrorLog0; // nE40 - uint64_t dma1ErrorLog1; // nE48 - uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS]; - uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS]; + __be64 p7iocPlssr; // n120 + __be64 p7iocCsr; // n110 + __be64 lemFir; // nC00 + __be64 lemErrorMask; // nC18 + __be64 lemWOF; // nC40 + __be64 phbErrorStatus; // nC80 + __be64 phbFirstErrorStatus; // nC88 + __be64 phbErrorLog0; // nCC0 + __be64 phbErrorLog1; // nCC8 + __be64 mmioErrorStatus; // nD00 + __be64 mmioFirstErrorStatus; // nD08 + __be64 mmioErrorLog0; // nD40 + __be64 mmioErrorLog1; // nD48 + __be64 dma0ErrorStatus; // nD80 + __be64 dma0FirstErrorStatus; // nD88 + __be64 dma0ErrorLog0; // nDC0 + __be64 dma0ErrorLog1; // nDC8 + __be64 dma1ErrorStatus; // nE00 + __be64 dma1FirstErrorStatus; // nE08 + __be64 dma1ErrorLog0; // nE40 + __be64 dma1ErrorLog1; // nE48 + __be64 pestA[OPAL_P7IOC_NUM_PEST_REGS]; + __be64 pestB[OPAL_P7IOC_NUM_PEST_REGS]; }; struct OpalIoPhb3ErrorData { @@ -758,6 +815,8 @@ int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number, __be64 *phb_status); int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number, uint64_t eeh_action_token); +int64_t opal_pci_eeh_freeze_set(uint64_t phb_id, uint64_t pe_number, + uint64_t eeh_action_token); int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state); @@ -768,7 +827,7 @@ int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type, uint16_t window_num, uint64_t starting_real_address, uint64_t starting_pci_address, - uint16_t segment_size); + uint64_t size); int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_type, uint16_t window_num, uint16_t segment_num); @@ -860,6 +919,7 @@ int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer, int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer, uint64_t length); int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data); +int64_t opal_handle_hmi(void); /* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, @@ -902,6 +962,8 @@ extern void opal_msglog_init(void); extern int opal_machine_check(struct pt_regs *regs); extern bool opal_mce_check_early_recovery(struct pt_regs *regs); +extern int opal_hmi_exception_early(struct pt_regs *regs); +extern int opal_handle_hmi_exception(struct pt_regs *regs); extern void opal_shutdown(void); extern int opal_resync_timebase(void); diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h index d697b08994c9..61fe5d6f18e1 100644 --- a/arch/powerpc/include/asm/oprofile_impl.h +++ b/arch/powerpc/include/asm/oprofile_impl.h @@ -61,7 +61,6 @@ struct op_powerpc_model { }; extern struct op_powerpc_model op_model_fsl_emb; -extern struct op_powerpc_model op_model_rs64; extern struct op_powerpc_model op_model_power4; extern struct op_powerpc_model op_model_7450; extern struct op_powerpc_model op_model_cell; diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index bb0bd25f20d0..a5139ea6910b 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -78,10 +78,6 @@ struct paca_struct { u64 kernel_toc; /* Kernel TOC address */ u64 kernelbase; /* Base address of kernel */ u64 kernel_msr; /* MSR while running in kernel */ -#ifdef CONFIG_PPC_STD_MMU_64 - u64 stab_real; /* Absolute address of segment table */ - u64 stab_addr; /* Virtual address of segment table */ -#endif /* CONFIG_PPC_STD_MMU_64 */ void *emergency_sp; /* pointer to emergency stack */ u64 data_offset; /* per cpu data offset */ s16 hw_cpu_id; /* Physical processor number */ @@ -171,6 +167,7 @@ struct paca_struct { * and already using emergency stack. */ u16 in_mce; + u8 hmi_event_available; /* HMI event is available */ #endif /* Stuff for accurate time accounting */ diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index b3e936027b26..814622146d5a 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -19,6 +19,8 @@ #define MAX_EVENT_ALTERNATIVES 8 #define MAX_LIMITED_HWCOUNTERS 2 +struct perf_event; + /* * This struct provides the constants and functions needed to * describe the PMU on a particular POWER-family CPU. @@ -30,7 +32,8 @@ struct power_pmu { unsigned long add_fields; unsigned long test_adder; int (*compute_mmcr)(u64 events[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]); + unsigned int hwc[], unsigned long mmcr[], + struct perf_event *pevents[]); int (*get_constraint)(u64 event_id, unsigned long *mskp, unsigned long *valp); int (*get_alternatives)(u64 event_id, unsigned int flags, diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 3132bb9365f3..e316dad6ba76 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -150,8 +150,10 @@ #define PPC_INST_MCRXR_MASK 0xfc0007fe #define PPC_INST_MFSPR_PVR 0x7c1f42a6 #define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff +#define PPC_INST_MFTMR 0x7c0002dc #define PPC_INST_MSGSND 0x7c00019c #define PPC_INST_MSGSNDP 0x7c00011c +#define PPC_INST_MTTMR 0x7c0003dc #define PPC_INST_NOP 0x60000000 #define PPC_INST_POPCNTB 0x7c0000f4 #define PPC_INST_POPCNTB_MASK 0xfc0007fe @@ -369,4 +371,11 @@ #define TABORT(r) stringify_in_c(.long PPC_INST_TABORT \ | __PPC_RA(r)) +/* book3e thread control instructions */ +#define TMRN(x) ((((x) & 0x1f) << 16) | (((x) & 0x3e0) << 6)) +#define MTTMR(tmr, r) stringify_in_c(.long PPC_INST_MTTMR | \ + TMRN(tmr) | ___PPC_RS(r)) +#define MFTMR(tmr, r) stringify_in_c(.long PPC_INST_MFTMR | \ + TMRN(tmr) | ___PPC_RT(r)) + #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h index 2c12be5f677a..e84dd7ed505e 100644 --- a/arch/powerpc/include/asm/pte-fsl-booke.h +++ b/arch/powerpc/include/asm/pte-fsl-booke.h @@ -37,5 +37,7 @@ #define _PMD_PRESENT_MASK (PAGE_MASK) #define _PMD_BAD (~PAGE_MASK) +#define PTE_WIMGE_SHIFT (6) + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */ diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index d836d945068d..b6d2d42f84b5 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -75,7 +75,8 @@ (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) #define remap_4k_pfn(vma, addr, pfn, prot) \ - remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ - __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) + (WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL : \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ + __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))) #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index bffd89d27301..f7b97b895708 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -254,7 +254,7 @@ #define DSISR_PROTFAULT 0x08000000 /* protection fault */ #define DSISR_ISSTORE 0x02000000 /* access was a store */ #define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ -#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ +#define DSISR_NOSEGMENT 0x00200000 /* SLB miss */ #define DSISR_KEYFAULT 0x00200000 /* Key fault */ #define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ #define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 464f1089b532..1d653308a33c 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -15,16 +15,28 @@ #ifndef __ASM_POWERPC_REG_BOOKE_H__ #define __ASM_POWERPC_REG_BOOKE_H__ +#include <asm/ppc-opcode.h> + /* Machine State Register (MSR) Fields */ -#define MSR_GS (1<<28) /* Guest state */ -#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ -#define MSR_SPE (1<<25) /* Enable SPE */ -#define MSR_DWE (1<<10) /* Debug Wait Enable */ -#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ -#define MSR_IS MSR_IR /* Instruction Space */ -#define MSR_DS MSR_DR /* Data Space */ -#define MSR_PMM (1<<2) /* Performance monitor mark bit */ -#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */ +#define MSR_GS_LG 28 /* Guest state */ +#define MSR_UCLE_LG 26 /* User-mode cache lock enable */ +#define MSR_SPE_LG 25 /* Enable SPE */ +#define MSR_DWE_LG 10 /* Debug Wait Enable */ +#define MSR_UBLE_LG 10 /* BTB lock enable (e500) */ +#define MSR_IS_LG MSR_IR_LG /* Instruction Space */ +#define MSR_DS_LG MSR_DR_LG /* Data Space */ +#define MSR_PMM_LG 2 /* Performance monitor mark bit */ +#define MSR_CM_LG 31 /* Computation Mode (0=32-bit, 1=64-bit) */ + +#define MSR_GS __MASK(MSR_GS_LG) +#define MSR_UCLE __MASK(MSR_UCLE_LG) +#define MSR_SPE __MASK(MSR_SPE_LG) +#define MSR_DWE __MASK(MSR_DWE_LG) +#define MSR_UBLE __MASK(MSR_UBLE_LG) +#define MSR_IS __MASK(MSR_IS_LG) +#define MSR_DS __MASK(MSR_DS_LG) +#define MSR_PMM __MASK(MSR_PMM_LG) +#define MSR_CM __MASK(MSR_CM_LG) #if defined(CONFIG_PPC_BOOK3E_64) #define MSR_64BIT MSR_CM @@ -260,7 +272,7 @@ /* e500mc */ #define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */ -#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */ +#define MCSR_L2MMU_MHIT 0x08000000UL /* Hit on multiple TLB entries */ #define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */ #define MCSR_MAV 0x00080000UL /* MCAR address valid */ #define MCSR_MEA 0x00040000UL /* MCAR is effective address */ @@ -598,6 +610,13 @@ /* Bit definitions for L1CSR2. */ #define L1CSR2_DCWS 0x40000000 /* Data Cache write shadow */ +/* Bit definitions for BUCSR. */ +#define BUCSR_STAC_EN 0x01000000 /* Segment Target Address Cache */ +#define BUCSR_LS_EN 0x00400000 /* Link Stack */ +#define BUCSR_BBFI 0x00000200 /* Branch Buffer flash invalidate */ +#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */ +#define BUCSR_INIT (BUCSR_STAC_EN | BUCSR_LS_EN | BUCSR_BBFI | BUCSR_BPEN) + /* Bit definitions for L2CSR0. */ #define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ #define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ @@ -721,5 +740,23 @@ #define MMUBE1_VBE4 0x00000002 #define MMUBE1_VBE5 0x00000001 +#define TMRN_IMSR0 0x120 /* Initial MSR Register 0 (e6500) */ +#define TMRN_IMSR1 0x121 /* Initial MSR Register 1 (e6500) */ +#define TMRN_INIA0 0x140 /* Next Instruction Address Register 0 */ +#define TMRN_INIA1 0x141 /* Next Instruction Address Register 1 */ +#define SPRN_TENSR 0x1b5 /* Thread Enable Status Register */ +#define SPRN_TENS 0x1b6 /* Thread Enable Set Register */ +#define SPRN_TENC 0x1b7 /* Thread Enable Clear Register */ + +#define TEN_THREAD(x) (1 << (x)) + +#ifndef __ASSEMBLY__ +#define mftmr(rn) ({unsigned long rval; \ + asm volatile(MFTMR(rn, %0) : "=r" (rval)); rval;}) +#define mttmr(rn, v) asm volatile(MTTMR(rn, %0) : \ + : "r" ((unsigned long)(v)) \ + : "memory") +#endif /* !__ASSEMBLY__ */ + #endif /* __ASM_POWERPC_REG_BOOKE_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index babbeca6850f..542bc0f0673f 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -77,10 +77,10 @@ SYSCALL_SPU(setreuid) SYSCALL_SPU(setregid) #define compat_sys_sigsuspend sys_sigsuspend SYS32ONLY(sigsuspend) -COMPAT_SYS(sigpending) +SYSX(sys_ni_syscall,compat_sys_sigpending,sys_sigpending) SYSCALL_SPU(sethostname) COMPAT_SYS_SPU(setrlimit) -COMPAT_SYS(old_getrlimit) +SYSX(sys_ni_syscall,compat_sys_old_getrlimit,sys_old_getrlimit) COMPAT_SYS_SPU(getrusage) COMPAT_SYS_SPU(gettimeofday) COMPAT_SYS_SPU(settimeofday) diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h index 5712f06905a9..c15da6073cb8 100644 --- a/arch/powerpc/include/asm/trace.h +++ b/arch/powerpc/include/asm/trace.h @@ -99,6 +99,51 @@ TRACE_EVENT_FN(hcall_exit, ); #endif +#ifdef CONFIG_PPC_POWERNV +extern void opal_tracepoint_regfunc(void); +extern void opal_tracepoint_unregfunc(void); + +TRACE_EVENT_FN(opal_entry, + + TP_PROTO(unsigned long opcode, unsigned long *args), + + TP_ARGS(opcode, args), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + ), + + TP_fast_assign( + __entry->opcode = opcode; + ), + + TP_printk("opcode=%lu", __entry->opcode), + + opal_tracepoint_regfunc, opal_tracepoint_unregfunc +); + +TRACE_EVENT_FN(opal_exit, + + TP_PROTO(unsigned long opcode, unsigned long retval), + + TP_ARGS(opcode, retval), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + __field(unsigned long, retval) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->retval = retval; + ), + + TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval), + + opal_tracepoint_regfunc, opal_tracepoint_unregfunc +); +#endif + #endif /* _TRACE_POWERPC_H */ #undef TRACE_INCLUDE_PATH diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index f5995a912213..e35054054c32 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -216,8 +216,6 @@ int main(void) #endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PPC_STD_MMU_64 - DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); - DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp)); diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 0c157642c2a1..9b6dcaaec1a3 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -123,96 +123,6 @@ extern void __restore_cpu_e6500(void); static struct cpu_spec __initdata cpu_specs[] = { #ifdef CONFIG_PPC_BOOK3S_64 - { /* Power3 */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00400000, - .cpu_name = "POWER3 (630)", - .cpu_features = CPU_FTRS_POWER3, - .cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power3", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "power3", - }, - { /* Power3+ */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00410000, - .cpu_name = "POWER3 (630+)", - .cpu_features = CPU_FTRS_POWER3, - .cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power3", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "power3", - }, - { /* Northstar */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00330000, - .cpu_name = "RS64-II (northstar)", - .cpu_features = CPU_FTRS_RS64, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/rs64", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "rs64", - }, - { /* Pulsar */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00340000, - .cpu_name = "RS64-III (pulsar)", - .cpu_features = CPU_FTRS_RS64, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/rs64", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "rs64", - }, - { /* I-star */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00360000, - .cpu_name = "RS64-III (icestar)", - .cpu_features = CPU_FTRS_RS64, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/rs64", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "rs64", - }, - { /* S-star */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00370000, - .cpu_name = "RS64-IV (sstar)", - .cpu_features = CPU_FTRS_RS64, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_HPTE_TABLE, - .icache_bsize = 128, - .dcache_bsize = 128, - .num_pmcs = 8, - .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/rs64", - .oprofile_type = PPC_OPROFILE_RS64, - .platform = "rs64", - }, { /* Power4 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00350000, @@ -617,7 +527,7 @@ static struct cpu_spec __initdata cpu_specs[] = { #endif /* CONFIG_PPC_BOOK3S_64 */ #ifdef CONFIG_PPC32 -#if CLASSIC_PPC +#ifdef CONFIG_PPC_BOOK3S_32 { /* 601 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00010000, @@ -1257,7 +1167,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "ppc603", }, -#endif /* CLASSIC_PPC */ +#endif /* CONFIG_PPC_BOOK3S_32 */ #ifdef CONFIG_8xx { /* 8xx */ .pvr_mask = 0xffff0000, diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 86e25702aaca..59a64f8dc85f 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/pci.h> +#include <linux/iommu.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> #include <linux/reboot.h> @@ -40,6 +41,7 @@ #include <asm/eeh.h> #include <asm/eeh_event.h> #include <asm/io.h> +#include <asm/iommu.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> #include <asm/rtas.h> @@ -108,6 +110,9 @@ struct eeh_ops *eeh_ops = NULL; /* Lock to avoid races due to multiple reports of an error */ DEFINE_RAW_SPINLOCK(confirm_error_lock); +/* Lock to protect passed flags */ +static DEFINE_MUTEX(eeh_dev_mutex); + /* Buffer for reporting pci register dumps. Its here in BSS, and * not dynamically alloced, so that it ends up in RMO where RTAS * can access it. @@ -137,7 +142,7 @@ static struct eeh_stats eeh_stats; static int __init eeh_setup(char *str) { if (!strcmp(str, "off")) - eeh_subsystem_flags |= EEH_FORCE_DISABLED; + eeh_add_flag(EEH_FORCE_DISABLED); return 1; } @@ -152,12 +157,13 @@ __setup("eeh=", eeh_setup); * This routine captures assorted PCI configuration space data, * and puts them into a buffer for RTAS error logging. */ -static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) +static size_t eeh_gather_pci_data(struct eeh_dev *edev, char *buf, size_t len) { struct device_node *dn = eeh_dev_to_of_node(edev); u32 cfg; int cap, i; - int n = 0; + int n = 0, l = 0; + char buffer[128]; n += scnprintf(buf+n, len-n, "%s\n", dn->full_name); pr_warn("EEH: of node=%s\n", dn->full_name); @@ -202,8 +208,22 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) for (i=0; i<=8; i++) { eeh_ops->read_config(dn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - pr_warn("EEH: PCI-E %02x: %08x\n", i, cfg); + + if ((i % 4) == 0) { + if (i != 0) + pr_warn("%s\n", buffer); + + l = scnprintf(buffer, sizeof(buffer), + "EEH: PCI-E %02x: %08x ", + 4*i, cfg); + } else { + l += scnprintf(buffer+l, sizeof(buffer)-l, + "%08x ", cfg); + } + } + + pr_warn("%s\n", buffer); } /* If AER capable, dump it */ @@ -212,11 +232,24 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) n += scnprintf(buf+n, len-n, "pci-e AER:\n"); pr_warn("EEH: PCI-E AER capability register set follows:\n"); - for (i=0; i<14; i++) { + for (i=0; i<=13; i++) { eeh_ops->read_config(dn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - pr_warn("EEH: PCI-E AER %02x: %08x\n", i, cfg); + + if ((i % 4) == 0) { + if (i != 0) + pr_warn("%s\n", buffer); + + l = scnprintf(buffer, sizeof(buffer), + "EEH: PCI-E AER %02x: %08x ", + 4*i, cfg); + } else { + l += scnprintf(buffer+l, sizeof(buffer)-l, + "%08x ", cfg); + } } + + pr_warn("%s\n", buffer); } return n; @@ -247,7 +280,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity) * 0xFF's is always returned from PCI config space. */ if (!(pe->type & EEH_PE_PHB)) { - if (eeh_probe_mode_devtree()) + if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG)) eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); @@ -298,14 +331,14 @@ static int eeh_phb_check_failure(struct eeh_pe *pe) unsigned long flags; int ret; - if (!eeh_probe_mode_dev()) + if (!eeh_has_flag(EEH_PROBE_MODE_DEV)) return -EPERM; /* Find the PHB PE */ phb_pe = eeh_phb_pe_get(pe->phb); if (!phb_pe) { - pr_warning("%s Can't find PE for PHB#%d\n", - __func__, pe->phb->global_number); + pr_warn("%s Can't find PE for PHB#%d\n", + __func__, pe->phb->global_number); return -EEXIST; } @@ -400,6 +433,14 @@ int eeh_dev_check_failure(struct eeh_dev *edev) if (ret > 0) return ret; + /* + * If the PE isn't owned by us, we shouldn't check the + * state. Instead, let the owner handle it if the PE has + * been frozen. + */ + if (eeh_pe_passed(pe)) + return 0; + /* If we already have a pending isolation event for this * slot, we know it's bad already, we don't need to check. * Do this checking under a lock; as multiple PCI devices @@ -746,13 +787,13 @@ void eeh_save_bars(struct eeh_dev *edev) int __init eeh_ops_register(struct eeh_ops *ops) { if (!ops->name) { - pr_warning("%s: Invalid EEH ops name for %p\n", + pr_warn("%s: Invalid EEH ops name for %p\n", __func__, ops); return -EINVAL; } if (eeh_ops && eeh_ops != ops) { - pr_warning("%s: EEH ops of platform %s already existing (%s)\n", + pr_warn("%s: EEH ops of platform %s already existing (%s)\n", __func__, eeh_ops->name, ops->name); return -EEXIST; } @@ -772,7 +813,7 @@ int __init eeh_ops_register(struct eeh_ops *ops) int __exit eeh_ops_unregister(const char *name) { if (!name || !strlen(name)) { - pr_warning("%s: Invalid EEH ops name\n", + pr_warn("%s: Invalid EEH ops name\n", __func__); return -EINVAL; } @@ -788,7 +829,7 @@ int __exit eeh_ops_unregister(const char *name) static int eeh_reboot_notifier(struct notifier_block *nb, unsigned long action, void *unused) { - eeh_set_enable(false); + eeh_clear_flag(EEH_ENABLED); return NOTIFY_DONE; } @@ -837,11 +878,11 @@ int eeh_init(void) /* call platform initialization function */ if (!eeh_ops) { - pr_warning("%s: Platform EEH operation not found\n", + pr_warn("%s: Platform EEH operation not found\n", __func__); return -EEXIST; } else if ((ret = eeh_ops->init())) { - pr_warning("%s: Failed to call platform init function (%d)\n", + pr_warn("%s: Failed to call platform init function (%d)\n", __func__, ret); return ret; } @@ -852,13 +893,13 @@ int eeh_init(void) return ret; /* Enable EEH for all adapters */ - if (eeh_probe_mode_devtree()) { + if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) { list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { phb = hose->dn; traverse_pci_devices(phb, eeh_ops->of_probe, NULL); } - } else if (eeh_probe_mode_dev()) { + } else if (eeh_has_flag(EEH_PROBE_MODE_DEV)) { list_for_each_entry_safe(hose, tmp, &hose_list, list_node) pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL); @@ -882,7 +923,7 @@ int eeh_init(void) if (eeh_enabled()) pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n"); else - pr_warning("EEH: No capable adapters found\n"); + pr_warn("EEH: No capable adapters found\n"); return ret; } @@ -910,7 +951,7 @@ void eeh_add_device_early(struct device_node *dn) * would delay the probe until late stage because * the PCI device isn't available this moment. */ - if (!eeh_probe_mode_devtree()) + if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) return; if (!of_node_to_eeh_dev(dn)) @@ -996,7 +1037,7 @@ void eeh_add_device_late(struct pci_dev *dev) * We have to do the EEH probe here because the PCI device * hasn't been created yet in the early stage. */ - if (eeh_probe_mode_dev()) + if (eeh_has_flag(EEH_PROBE_MODE_DEV)) eeh_ops->dev_probe(dev, NULL); eeh_addr_cache_insert_dev(dev); @@ -1100,6 +1141,285 @@ void eeh_remove_device(struct pci_dev *dev) edev->mode &= ~EEH_DEV_SYSFS; } +/** + * eeh_dev_open - Increase count of pass through devices for PE + * @pdev: PCI device + * + * Increase count of passed through devices for the indicated + * PE. In the result, the EEH errors detected on the PE won't be + * reported. The PE owner will be responsible for detection + * and recovery. + */ +int eeh_dev_open(struct pci_dev *pdev) +{ + struct eeh_dev *edev; + + mutex_lock(&eeh_dev_mutex); + + /* No PCI device ? */ + if (!pdev) + goto out; + + /* No EEH device or PE ? */ + edev = pci_dev_to_eeh_dev(pdev); + if (!edev || !edev->pe) + goto out; + + /* Increase PE's pass through count */ + atomic_inc(&edev->pe->pass_dev_cnt); + mutex_unlock(&eeh_dev_mutex); + + return 0; +out: + mutex_unlock(&eeh_dev_mutex); + return -ENODEV; +} +EXPORT_SYMBOL_GPL(eeh_dev_open); + +/** + * eeh_dev_release - Decrease count of pass through devices for PE + * @pdev: PCI device + * + * Decrease count of pass through devices for the indicated PE. If + * there is no passed through device in PE, the EEH errors detected + * on the PE will be reported and handled as usual. + */ +void eeh_dev_release(struct pci_dev *pdev) +{ + struct eeh_dev *edev; + + mutex_lock(&eeh_dev_mutex); + + /* No PCI device ? */ + if (!pdev) + goto out; + + /* No EEH device ? */ + edev = pci_dev_to_eeh_dev(pdev); + if (!edev || !edev->pe || !eeh_pe_passed(edev->pe)) + goto out; + + /* Decrease PE's pass through count */ + atomic_dec(&edev->pe->pass_dev_cnt); + WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0); +out: + mutex_unlock(&eeh_dev_mutex); +} +EXPORT_SYMBOL(eeh_dev_release); + +#ifdef CONFIG_IOMMU_API + +static int dev_has_iommu_table(struct device *dev, void *data) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pci_dev **ppdev = data; + struct iommu_table *tbl; + + if (!dev) + return 0; + + tbl = get_iommu_table_base(dev); + if (tbl && tbl->it_group) { + *ppdev = pdev; + return 1; + } + + return 0; +} + +/** + * eeh_iommu_group_to_pe - Convert IOMMU group to EEH PE + * @group: IOMMU group + * + * The routine is called to convert IOMMU group to EEH PE. + */ +struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group) +{ + struct pci_dev *pdev = NULL; + struct eeh_dev *edev; + int ret; + + /* No IOMMU group ? */ + if (!group) + return NULL; + + ret = iommu_group_for_each_dev(group, &pdev, dev_has_iommu_table); + if (!ret || !pdev) + return NULL; + + /* No EEH device or PE ? */ + edev = pci_dev_to_eeh_dev(pdev); + if (!edev || !edev->pe) + return NULL; + + return edev->pe; +} +EXPORT_SYMBOL_GPL(eeh_iommu_group_to_pe); + +#endif /* CONFIG_IOMMU_API */ + +/** + * eeh_pe_set_option - Set options for the indicated PE + * @pe: EEH PE + * @option: requested option + * + * The routine is called to enable or disable EEH functionality + * on the indicated PE, to enable IO or DMA for the frozen PE. + */ +int eeh_pe_set_option(struct eeh_pe *pe, int option) +{ + int ret = 0; + + /* Invalid PE ? */ + if (!pe) + return -ENODEV; + + /* + * EEH functionality could possibly be disabled, just + * return error for the case. And the EEH functinality + * isn't expected to be disabled on one specific PE. + */ + switch (option) { + case EEH_OPT_ENABLE: + if (eeh_enabled()) + break; + ret = -EIO; + break; + case EEH_OPT_DISABLE: + break; + case EEH_OPT_THAW_MMIO: + case EEH_OPT_THAW_DMA: + if (!eeh_ops || !eeh_ops->set_option) { + ret = -ENOENT; + break; + } + + ret = eeh_ops->set_option(pe, option); + break; + default: + pr_debug("%s: Option %d out of range (%d, %d)\n", + __func__, option, EEH_OPT_DISABLE, EEH_OPT_THAW_DMA); + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(eeh_pe_set_option); + +/** + * eeh_pe_get_state - Retrieve PE's state + * @pe: EEH PE + * + * Retrieve the PE's state, which includes 3 aspects: enabled + * DMA, enabled IO and asserted reset. + */ +int eeh_pe_get_state(struct eeh_pe *pe) +{ + int result, ret = 0; + bool rst_active, dma_en, mmio_en; + + /* Existing PE ? */ + if (!pe) + return -ENODEV; + + if (!eeh_ops || !eeh_ops->get_state) + return -ENOENT; + + result = eeh_ops->get_state(pe, NULL); + rst_active = !!(result & EEH_STATE_RESET_ACTIVE); + dma_en = !!(result & EEH_STATE_DMA_ENABLED); + mmio_en = !!(result & EEH_STATE_MMIO_ENABLED); + + if (rst_active) + ret = EEH_PE_STATE_RESET; + else if (dma_en && mmio_en) + ret = EEH_PE_STATE_NORMAL; + else if (!dma_en && !mmio_en) + ret = EEH_PE_STATE_STOPPED_IO_DMA; + else if (!dma_en && mmio_en) + ret = EEH_PE_STATE_STOPPED_DMA; + else + ret = EEH_PE_STATE_UNAVAIL; + + return ret; +} +EXPORT_SYMBOL_GPL(eeh_pe_get_state); + +/** + * eeh_pe_reset - Issue PE reset according to specified type + * @pe: EEH PE + * @option: reset type + * + * The routine is called to reset the specified PE with the + * indicated type, either fundamental reset or hot reset. + * PE reset is the most important part for error recovery. + */ +int eeh_pe_reset(struct eeh_pe *pe, int option) +{ + int ret = 0; + + /* Invalid PE ? */ + if (!pe) + return -ENODEV; + + if (!eeh_ops || !eeh_ops->set_option || !eeh_ops->reset) + return -ENOENT; + + switch (option) { + case EEH_RESET_DEACTIVATE: + ret = eeh_ops->reset(pe, option); + if (ret) + break; + + /* + * The PE is still in frozen state and we need to clear + * that. It's good to clear frozen state after deassert + * to avoid messy IO access during reset, which might + * cause recursive frozen PE. + */ + ret = eeh_ops->set_option(pe, EEH_OPT_THAW_MMIO); + if (!ret) + ret = eeh_ops->set_option(pe, EEH_OPT_THAW_DMA); + if (!ret) + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + break; + case EEH_RESET_HOT: + case EEH_RESET_FUNDAMENTAL: + ret = eeh_ops->reset(pe, option); + break; + default: + pr_debug("%s: Unsupported option %d\n", + __func__, option); + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(eeh_pe_reset); + +/** + * eeh_pe_configure - Configure PCI bridges after PE reset + * @pe: EEH PE + * + * The routine is called to restore the PCI config space for + * those PCI devices, especially PCI bridges affected by PE + * reset issued previously. + */ +int eeh_pe_configure(struct eeh_pe *pe) +{ + int ret = 0; + + /* Invalid PE ? */ + if (!pe) + return -ENODEV; + + /* Restore config space for the affected devices */ + eeh_pe_restore_bars(pe); + + return ret; +} +EXPORT_SYMBOL_GPL(eeh_pe_configure); + static int proc_eeh_show(struct seq_file *m, void *v) { if (!eeh_enabled()) { @@ -1143,9 +1463,9 @@ static const struct file_operations proc_eeh_operations = { static int eeh_enable_dbgfs_set(void *data, u64 val) { if (val) - eeh_subsystem_flags &= ~EEH_FORCE_DISABLED; + eeh_clear_flag(EEH_FORCE_DISABLED); else - eeh_subsystem_flags |= EEH_FORCE_DISABLED; + eeh_add_flag(EEH_FORCE_DISABLED); /* Notify the backend */ if (eeh_ops->post_init) diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c index e8c9fd546a5c..07d8a2423a61 100644 --- a/arch/powerpc/kernel/eeh_cache.c +++ b/arch/powerpc/kernel/eeh_cache.c @@ -143,7 +143,7 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo, } else { if (dev != piar->pcidev || alo != piar->addr_lo || ahi != piar->addr_hi) { - pr_warning("PIAR: overlapping address range\n"); + pr_warn("PIAR: overlapping address range\n"); } return piar; } @@ -177,19 +177,20 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (!dn) { - pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev)); + pr_warn("PCI: no pci dn found for dev=%s\n", + pci_name(dev)); return; } edev = of_node_to_eeh_dev(dn); if (!edev) { - pr_warning("PCI: no EEH dev found for dn=%s\n", + pr_warn("PCI: no EEH dev found for dn=%s\n", dn->full_name); return; } /* Skip any devices for which EEH is not enabled. */ - if (!eeh_probe_mode_dev() && !edev->pe) { + if (!edev->pe) { #ifdef DEBUG pr_info("PCI: skip building address cache for=%s - %s\n", pci_name(dev), dn->full_name); diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c index 1efa28f5fc54..e5274ee9a75f 100644 --- a/arch/powerpc/kernel/eeh_dev.c +++ b/arch/powerpc/kernel/eeh_dev.c @@ -57,7 +57,8 @@ void *eeh_dev_init(struct device_node *dn, void *data) /* Allocate EEH device */ edev = kzalloc(sizeof(*edev), GFP_KERNEL); if (!edev) { - pr_warning("%s: out of memory\n", __func__); + pr_warn("%s: out of memory\n", + __func__); return NULL; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 420da61d4ce0..6a0dcee8e931 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -599,7 +599,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) pe->freeze_count++; if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) goto excess_failures; - pr_warning("EEH: This PCI device has failed %d times in the last hour\n", + pr_warn("EEH: This PCI device has failed %d times in the last hour\n", pe->freeze_count); /* Walk the various device drivers attached to this slot through @@ -616,7 +616,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) */ rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { - pr_warning("EEH: Permanent failure\n"); + pr_warn("EEH: Permanent failure\n"); goto hard_fail; } @@ -635,8 +635,8 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) pr_info("EEH: Reset with hotplug activity\n"); rc = eeh_reset_device(pe, frozen_bus); if (rc) { - pr_warning("%s: Unable to reset, err=%d\n", - __func__, rc); + pr_warn("%s: Unable to reset, err=%d\n", + __func__, rc); goto hard_fail; } } @@ -678,7 +678,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) /* If any device has a hard failure, then shut off everything. */ if (result == PCI_ERS_RESULT_DISCONNECT) { - pr_warning("EEH: Device driver gave up\n"); + pr_warn("EEH: Device driver gave up\n"); goto hard_fail; } @@ -687,8 +687,8 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) pr_info("EEH: Reset without hotplug activity\n"); rc = eeh_reset_device(pe, NULL); if (rc) { - pr_warning("%s: Cannot reset, err=%d\n", - __func__, rc); + pr_warn("%s: Cannot reset, err=%d\n", + __func__, rc); goto hard_fail; } @@ -701,7 +701,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) /* All devices should claim they have recovered by now. */ if ((result != PCI_ERS_RESULT_RECOVERED) && (result != PCI_ERS_RESULT_NONE)) { - pr_warning("EEH: Not recovered\n"); + pr_warn("EEH: Not recovered\n"); goto hard_fail; } diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index fbd01eba4473..00e3844525a6 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -32,9 +32,24 @@ #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> +static int eeh_pe_aux_size = 0; static LIST_HEAD(eeh_phb_pe); /** + * eeh_set_pe_aux_size - Set PE auxillary data size + * @size: PE auxillary data size + * + * Set PE auxillary data size + */ +void eeh_set_pe_aux_size(int size) +{ + if (size < 0) + return; + + eeh_pe_aux_size = size; +} + +/** * eeh_pe_alloc - Allocate PE * @phb: PCI controller * @type: PE type @@ -44,9 +59,16 @@ static LIST_HEAD(eeh_phb_pe); static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type) { struct eeh_pe *pe; + size_t alloc_size; + + alloc_size = sizeof(struct eeh_pe); + if (eeh_pe_aux_size) { + alloc_size = ALIGN(alloc_size, cache_line_size()); + alloc_size += eeh_pe_aux_size; + } /* Allocate PHB PE */ - pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL); + pe = kzalloc(alloc_size, GFP_KERNEL); if (!pe) return NULL; /* Initialize PHB PE */ @@ -56,6 +78,8 @@ static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type) INIT_LIST_HEAD(&pe->child); INIT_LIST_HEAD(&pe->edevs); + pe->data = (void *)pe + ALIGN(sizeof(struct eeh_pe), + cache_line_size()); return pe; } @@ -179,7 +203,8 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root, void *ret; if (!root) { - pr_warning("%s: Invalid PE %p\n", __func__, root); + pr_warn("%s: Invalid PE %p\n", + __func__, root); return NULL; } @@ -351,17 +376,6 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev) pe->config_addr = edev->config_addr; /* - * While doing PE reset, we probably hot-reset the - * upstream bridge. However, the PCI devices including - * the associated EEH devices might be removed when EEH - * core is doing recovery. So that won't safe to retrieve - * the bridge through downstream EEH device. We have to - * trace the parent PCI bus, then the upstream bridge. - */ - if (eeh_probe_mode_dev()) - pe->bus = eeh_dev_to_pci_dev(edev)->bus; - - /* * Put the new EEH PE into hierarchy tree. If the parent * can't be found, the newly created PE will be attached * to PHB directly. Otherwise, we have to associate the @@ -802,53 +816,33 @@ void eeh_pe_restore_bars(struct eeh_pe *pe) */ const char *eeh_pe_loc_get(struct eeh_pe *pe) { - struct pci_controller *hose; struct pci_bus *bus = eeh_pe_bus_get(pe); - struct pci_dev *pdev; - struct device_node *dn; - const char *loc; + struct device_node *dn = pci_bus_to_OF_node(bus); + const char *loc = NULL; - if (!bus) - return "N/A"; + if (!dn) + goto out; /* PHB PE or root PE ? */ if (pci_is_root_bus(bus)) { - hose = pci_bus_to_host(bus); - loc = of_get_property(hose->dn, - "ibm,loc-code", NULL); + loc = of_get_property(dn, "ibm,loc-code", NULL); + if (!loc) + loc = of_get_property(dn, "ibm,io-base-loc-code", NULL); if (loc) - return loc; - loc = of_get_property(hose->dn, - "ibm,io-base-loc-code", NULL); - if (loc) - return loc; - - pdev = pci_get_slot(bus, 0x0); - } else { - pdev = bus->self; - } - - if (!pdev) { - loc = "N/A"; - goto out; - } + goto out; - dn = pci_device_to_OF_node(pdev); - if (!dn) { - loc = "N/A"; - goto out; + /* Check the root port */ + dn = dn->child; + if (!dn) + goto out; } loc = of_get_property(dn, "ibm,loc-code", NULL); if (!loc) loc = of_get_property(dn, "ibm,slot-location-code", NULL); - if (!loc) - loc = "N/A"; out: - if (pci_is_root_bus(bus) && pdev) - pci_dev_put(pdev); - return loc; + return loc ? loc : "N/A"; } /** diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 6528c5e2cc44..5bbd1bc8c3b0 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -482,16 +482,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) ld r8,KSP(r4) /* new stack pointer */ #ifdef CONFIG_PPC_BOOK3S BEGIN_FTR_SECTION - BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ clrrdi r9,r1,28 /* get current sp ESID */ - FTR_SECTION_ELSE_NESTED(95) +FTR_SECTION_ELSE clrrdi r6,r8,40 /* get its 1T ESID */ clrrdi r9,r1,40 /* get current sp 1T ESID */ - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95) -FTR_SECTION_ELSE - b 2f -ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB) +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT) clrldi. r0,r6,2 /* is new ESID c00000000? */ cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ cror eq,4*cr1+eq,eq @@ -919,6 +915,11 @@ restore_check_irq_replay: addi r3,r1,STACK_FRAME_OVERHEAD; bl do_IRQ b ret_from_except +1: cmpwi cr0,r3,0xe60 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl handle_hmi_exception + b ret_from_except 1: cmpwi cr0,r3,0x900 bne 1f addi r3,r1,STACK_FRAME_OVERHEAD; diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index a7d36b19221d..6144d5a6bfe7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -188,10 +188,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) data_access_pSeries: HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) -BEGIN_FTR_SECTION - b data_access_check_stab -data_access_not_stab: -END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD, KVMTEST, 0x300) @@ -339,7 +335,7 @@ emulation_assist_trampoline: hv_exception_trampoline: SET_SCRATCH0(r13) EXCEPTION_PROLOG_0(PACA_EXGEN) - b hmi_exception_hv + b hmi_exception_early . = 0xe80 hv_doorbell_trampoline: @@ -514,34 +510,6 @@ machine_check_pSeries_0: EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200) EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD) KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200) - - /* moved from 0x300 */ -data_access_check_stab: - GET_PACA(r13) - std r9,PACA_EXSLB+EX_R9(r13) - std r10,PACA_EXSLB+EX_R10(r13) - mfspr r10,SPRN_DAR - mfspr r9,SPRN_DSISR - srdi r10,r10,60 - rlwimi r10,r9,16,0x20 -#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE - lbz r9,HSTATE_IN_GUEST(r13) - rlwimi r10,r9,8,0x300 -#endif - mfcr r9 - cmpwi r10,0x2c - beq do_stab_bolted_pSeries - mtcrf 0x80,r9 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - b data_access_not_stab -do_stab_bolted_pSeries: - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - GET_SCRATCH0(r10) - std r10,PACA_EXSLB+EX_R13(r13) - EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD) - KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400) @@ -621,8 +589,64 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22) STD_EXCEPTION_HV_OOL(0xe42, emulation_assist) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42) - STD_EXCEPTION_HV_OOL(0xe62, hmi_exception) /* need to flush cache ? */ + MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62) + + .globl hmi_exception_early +hmi_exception_early: + EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60) + mr r10,r1 /* Save r1 */ + ld r1,PACAEMERGSP(r13) /* Use emergency stack */ + subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ + std r9,_CCR(r1) /* save CR in stackframe */ + mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ + std r11,_NIP(r1) /* save HSRR0 in stackframe */ + mfspr r12,SPRN_HSRR1 /* Save SRR1 */ + std r12,_MSR(r1) /* save SRR1 in stackframe */ + std r10,0(r1) /* make stack chain pointer */ + std r0,GPR0(r1) /* save r0 in stackframe */ + std r10,GPR1(r1) /* save r1 in stackframe */ + EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN) + EXCEPTION_PROLOG_COMMON_3(0xe60) + addi r3,r1,STACK_FRAME_OVERHEAD + bl hmi_exception_realmode + /* Windup the stack. */ + /* Clear MSR_RI before setting SRR0 and SRR1. */ + li r0,MSR_RI + mfmsr r9 /* get MSR value */ + andc r9,r9,r0 + mtmsrd r9,1 /* Clear MSR_RI */ + /* Move original HSRR0 and HSRR1 into the respective regs */ + ld r9,_MSR(r1) + mtspr SPRN_HSRR1,r9 + ld r3,_NIP(r1) + mtspr SPRN_HSRR0,r3 + ld r9,_CTR(r1) + mtctr r9 + ld r9,_XER(r1) + mtxer r9 + ld r9,_LINK(r1) + mtlr r9 + REST_GPR(0, r1) + REST_8GPRS(2, r1) + REST_GPR(10, r1) + ld r11,_CCR(r1) + mtcr r11 + REST_GPR(11, r1) + REST_2GPRS(12, r1) + /* restore original r1. */ + ld r1,GPR1(r1) + + /* + * Go to virtual mode and pull the HMI event information from + * firmware. + */ + .globl hmi_exception_after_realmode +hmi_exception_after_realmode: + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b hmi_exception_hv + MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82) @@ -643,6 +667,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) * - If it was a decrementer interrupt, we bump the dec to max and and return. * - If it was a doorbell we return immediately since doorbells are edge * triggered and won't automatically refire. + * - If it was a HMI we return immediately since we handled it in realmode + * and it won't refire. * - else we hard disable and return. * This is called with r10 containing the value to OR to the paca field. */ @@ -660,6 +686,8 @@ masked_##_H##interrupt: \ b 2f; \ 1: cmpwi r10,PACA_IRQ_DBELL; \ beq 2f; \ + cmpwi r10,PACA_IRQ_HMI; \ + beq 2f; \ mfspr r10,SPRN_##_H##SRR1; \ rldicl r10,r10,48,1; /* clear MSR_EE */ \ rotldi r10,r10,16; \ @@ -799,7 +827,7 @@ kvmppc_skip_Hinterrupt: STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception) STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt) - STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception) + STD_EXCEPTION_COMMON_ASYNC(0xe60, hmi_exception, handle_hmi_exception) #ifdef CONFIG_PPC_DOORBELL STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception) #else @@ -985,66 +1013,6 @@ ppc64_runlatch_on_trampoline: b __ppc64_runlatch_on /* - * Here we have detected that the kernel stack pointer is bad. - * R9 contains the saved CR, r13 points to the paca, - * r10 contains the (bad) kernel stack pointer, - * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using an emergency stack, save the registers there, - * and call kernel_bad_stack(), which panics. - */ -bad_stack: - ld r1,PACAEMERGSP(r13) - subi r1,r1,64+INT_FRAME_SIZE - std r9,_CCR(r1) - std r10,GPR1(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - mfspr r11,SPRN_DAR - mfspr r12,SPRN_DSISR - std r11,_DAR(r1) - std r12,_DSISR(r1) - mflr r10 - mfctr r11 - mfxer r12 - std r10,_LINK(r1) - std r11,_CTR(r1) - std r12,_XER(r1) - SAVE_GPR(0,r1) - SAVE_GPR(2,r1) - ld r10,EX_R3(r3) - std r10,GPR3(r1) - SAVE_GPR(4,r1) - SAVE_4GPRS(5,r1) - ld r9,EX_R9(r3) - ld r10,EX_R10(r3) - SAVE_2GPRS(9,r1) - ld r9,EX_R11(r3) - ld r10,EX_R12(r3) - ld r11,EX_R13(r3) - std r9,GPR11(r1) - std r10,GPR12(r1) - std r11,GPR13(r1) -BEGIN_FTR_SECTION - ld r10,EX_CFAR(r3) - std r10,ORIG_GPR3(r1) -END_FTR_SECTION_IFSET(CPU_FTR_CFAR) - SAVE_8GPRS(14,r1) - SAVE_10GPRS(22,r1) - lhz r12,PACA_TRAP_SAVE(r13) - std r12,_TRAP(r1) - addi r11,r1,INT_FRAME_SIZE - std r11,0(r1) - li r12,0 - std r12,0(r11) - ld r2,PACATOC(r13) - ld r11,exception_marker@toc(r2) - std r12,RESULT(r1) - std r11,STACK_FRAME_OVERHEAD-16(r1) -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl kernel_bad_stack - b 1b - -/* * Here r13 points to the paca, r9 contains the saved CR, * SRR0 and SRR1 are saved in r11 and r12, * r9 - r13 are saved in paca->exgen. @@ -1057,7 +1025,7 @@ data_access_common: mfspr r10,SPRN_DSISR stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) ld r12,_MSR(r1) ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) @@ -1073,7 +1041,7 @@ h_data_storage_common: stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl unknown_exception b ret_from_except @@ -1082,7 +1050,7 @@ h_data_storage_common: .globl instruction_access_common instruction_access_common: EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) ld r12,_MSR(r1) ld r3,_NIP(r1) andis. r4,r12,0x5820 @@ -1146,7 +1114,7 @@ slb_miss_fault: unrecov_user_slb: EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) bl save_nvgprs 1: addi r3,r1,STACK_FRAME_OVERHEAD bl unrecoverable_exception @@ -1169,7 +1137,7 @@ machine_check_common: stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) FINISH_NAP - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) std r3,_DAR(r1) @@ -1192,7 +1160,7 @@ alignment_common: std r3,_DAR(r1) std r4,_DSISR(r1) bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl alignment_exception b ret_from_except @@ -1202,7 +1170,7 @@ alignment_common: program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl program_check_exception b ret_from_except @@ -1213,7 +1181,7 @@ fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) bne 1f /* if from user, just load it up */ bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl kernel_fp_unavailable_exception BUG_OPCODE @@ -1232,7 +1200,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl fp_unavailable_tm b ret_from_except @@ -1258,7 +1226,7 @@ BEGIN_FTR_SECTION #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl altivec_unavailable_tm b ret_from_except @@ -1267,7 +1235,7 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl altivec_unavailable_exception b ret_from_except @@ -1292,7 +1260,7 @@ BEGIN_FTR_SECTION #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl vsx_unavailable_tm b ret_from_except @@ -1301,7 +1269,7 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif bl save_nvgprs - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) addi r3,r1,STACK_FRAME_OVERHEAD bl vsx_unavailable_exception b ret_from_except @@ -1338,12 +1306,6 @@ fwnmi_data_area: . = 0x8000 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ -/* Space for CPU0's segment table */ - .balign 4096 - .globl initial_stab -initial_stab: - .space 4096 - #ifdef CONFIG_PPC_POWERNV _GLOBAL(opal_mc_secondary_handler) HMT_MEDIUM_PPR_DISCARD @@ -1566,7 +1528,7 @@ slb_miss_realmode: unrecov_slb: EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS + RECONCILE_IRQ_STATE(r10, r11) bl save_nvgprs 1: addi r3,r1,STACK_FRAME_OVERHEAD bl unrecoverable_exception @@ -1594,12 +1556,6 @@ do_hash_page: bne- handle_page_fault /* if not, try to insert a HPTE */ andis. r0,r4,DSISR_DABRMATCH@h bne- handle_dabr_fault - -BEGIN_FTR_SECTION - andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- do_ste_alloc /* If so handle it */ -END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) - CURRENT_THREAD_INFO(r11, r1) lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ @@ -1681,113 +1637,62 @@ handle_dabr_fault: bl bad_page_fault b ret_from_except - /* here we have a segment miss */ -do_ste_alloc: - bl ste_allocate /* try to insert stab entry */ - cmpdi r3,0 - bne- handle_page_fault - b fast_exception_return - /* - * r13 points to the PACA, r9 contains the saved CR, + * Here we have detected that the kernel stack pointer is bad. + * R9 contains the saved CR, r13 points to the paca, + * r10 contains the (bad) kernel stack pointer, * r11 and r12 contain the saved SRR0 and SRR1. - * r9 - r13 are saved in paca->exslb. - * We assume we aren't going to take any exceptions during this procedure. - * We assume (DAR >> 60) == 0xc. + * We switch to using an emergency stack, save the registers there, + * and call kernel_bad_stack(), which panics. */ - .align 7 -do_stab_bolted: - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ - mfspr r11,SPRN_DAR /* ea */ - - /* - * check for bad kernel/user address - * (ea & ~REGION_MASK) >= PGTABLE_RANGE - */ - rldicr. r9,r11,4,(63 - 46 - 4) - li r9,0 /* VSID = 0 for bad address */ - bne- 0f - - /* - * Calculate VSID: - * This is the kernel vsid, we take the top for context from - * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 - * Here we know that (ea >> 60) == 0xc - */ - lis r9,(MAX_USER_CONTEXT + 1)@ha - addi r9,r9,(MAX_USER_CONTEXT + 1)@l - - srdi r10,r11,SID_SHIFT - rldimi r10,r9,ESID_BITS,0 /* proto vsid */ - ASM_VSID_SCRAMBLE(r10, r9, 256M) - rldic r9,r10,12,16 /* r9 = vsid << 12 */ - -0: - /* Hash to the primary group */ - ld r10,PACASTABVIRT(r13) - srdi r11,r11,SID_SHIFT - rldimi r10,r11,7,52 /* r10 = first ste of the group */ - - /* Search the primary group for a free entry */ -1: ld r11,0(r10) /* Test valid bit of the current ste */ - andi. r11,r11,0x80 - beq 2f - addi r10,r10,16 - andi. r11,r10,0x70 - bne 1b - - /* Stick for only searching the primary group for now. */ - /* At least for now, we use a very simple random castout scheme */ - /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ - mftb r11 - rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ - ori r11,r11,0x10 - - /* r10 currently points to an ste one past the group of interest */ - /* make it point to the randomly selected entry */ - subi r10,r10,128 - or r10,r10,r11 /* r10 is the entry to invalidate */ - - isync /* mark the entry invalid */ - ld r11,0(r10) - rldicl r11,r11,56,1 /* clear the valid bit */ - rotldi r11,r11,8 - std r11,0(r10) - sync - - clrrdi r11,r11,28 /* Get the esid part of the ste */ - slbie r11 - -2: std r9,8(r10) /* Store the vsid part of the ste */ - eieio - - mfspr r11,SPRN_DAR /* Get the new esid */ - clrrdi r11,r11,28 /* Permits a full 32b of ESID */ - ori r11,r11,0x90 /* Turn on valid and kp */ - std r11,0(r10) /* Put new entry back into the stab */ - - sync - - /* All done -- return from exception. */ - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ - - andi. r10,r12,MSR_RI - beq- unrecov_slb - - mtcrf 0x80,r9 /* restore CR */ - - mfmsr r10 - clrrdi r10,r10,2 - mtmsrd r10,1 - - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ +bad_stack: + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r9,_CCR(r1) + std r10,GPR1(r1) + std r11,_NIP(r1) + std r12,_MSR(r1) + mfspr r11,SPRN_DAR + mfspr r12,SPRN_DSISR + std r11,_DAR(r1) + std r12,_DSISR(r1) + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_GPR(0,r1) + SAVE_GPR(2,r1) + ld r10,EX_R3(r3) + std r10,GPR3(r1) + SAVE_GPR(4,r1) + SAVE_4GPRS(5,r1) + ld r9,EX_R9(r3) + ld r10,EX_R10(r3) + SAVE_2GPRS(9,r1) + ld r9,EX_R11(r3) + ld r10,EX_R12(r3) + ld r11,EX_R13(r3) + std r9,GPR11(r1) + std r10,GPR12(r1) + std r11,GPR13(r1) +BEGIN_FTR_SECTION + ld r10,EX_CFAR(r3) + std r10,ORIG_GPR3(r1) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + SAVE_8GPRS(14,r1) + SAVE_10GPRS(22,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) + ld r11,exception_marker@toc(r2) + std r12,RESULT(r1) + std r11,STACK_FRAME_OVERHEAD-16(r1) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl kernel_bad_stack + b 1b diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index a95145d7f61b..d48125d0c048 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -180,6 +180,28 @@ exception_marker: #include "exceptions-64s.S" #endif +#ifdef CONFIG_PPC_BOOK3E +_GLOBAL(fsl_secondary_thread_init) + /* Enable branch prediction */ + lis r3,BUCSR_INIT@h + ori r3,r3,BUCSR_INIT@l + mtspr SPRN_BUCSR,r3 + isync + + /* + * Fix PIR to match the linear numbering in the device tree. + * + * On e6500, the reset value of PIR uses the low three bits for + * the thread within a core, and the upper bits for the core + * number. There are two threads per core, so shift everything + * but the low bit right by two bits so that the cpu numbering is + * continuous. + */ + mfspr r3, SPRN_PIR + rlwimi r3, r3, 30, 2, 30 + mtspr SPRN_PIR, r3 +#endif + _GLOBAL(generic_secondary_thread_init) mr r24,r3 @@ -618,7 +640,7 @@ __secondary_start: addi r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD std r14,PACAKSAVE(r13) - /* Do early setup for that CPU (stab, slb, hash table pointer) */ + /* Do early setup for that CPU (SLB and hash table pointer) */ bl early_setup_secondary /* @@ -771,8 +793,10 @@ start_here_multiplatform: li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* Do very early kernel initializations, including initial hash table, - * stab and slb setup before we turn on relocation. */ + /* + * Do very early kernel initializations, including initial hash table + * and SLB setup before we turn on relocation. + */ /* Restore parameters passed from prom_init/kexec */ mr r3,r31 diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 5cf3d367190d..be05841396cf 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -135,17 +135,68 @@ _GLOBAL(power7_sleep) b power7_powersave_common /* No return */ +/* + * Make opal call in realmode. This is a generic function to be called + * from realmode from reset vector. It handles endianess. + * + * r13 - paca pointer + * r1 - stack pointer + * r3 - opal token + */ +opal_call_realmode: + mflr r12 + std r12,_LINK(r1) + ld r2,PACATOC(r13) + /* Set opal return address */ + LOAD_REG_ADDR(r0,return_from_opal_call) + mtlr r0 + /* Handle endian-ness */ + li r0,MSR_LE + mfmsr r12 + andc r12,r12,r0 + mtspr SPRN_HSRR1,r12 + mr r0,r3 /* Move opal token to r0 */ + LOAD_REG_ADDR(r11,opal) + ld r12,8(r11) + ld r2,0(r11) + mtspr SPRN_HSRR0,r12 + hrfid + +return_from_opal_call: + FIXUP_ENDIAN + ld r0,_LINK(r1) + mtlr r0 + blr + +#define CHECK_HMI_INTERRUPT \ + mfspr r0,SPRN_SRR1; \ +BEGIN_FTR_SECTION_NESTED(66); \ + rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \ +FTR_SECTION_ELSE_NESTED(66); \ + rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \ +ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ + cmpwi r0,0xa; /* Hypervisor maintenance ? */ \ + bne 20f; \ + /* Invoke opal call to handle hmi */ \ + ld r2,PACATOC(r13); \ + ld r1,PACAR1(r13); \ + std r3,ORIG_GPR3(r1); /* Save original r3 */ \ + li r3,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \ + bl opal_call_realmode; \ + ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \ +20: nop; + + _GLOBAL(power7_wakeup_tb_loss) ld r2,PACATOC(r13); ld r1,PACAR1(r13) +BEGIN_FTR_SECTION + CHECK_HMI_INTERRUPT +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) /* Time base re-sync */ - li r0,OPAL_RESYNC_TIMEBASE - LOAD_REG_ADDR(r11,opal); - ld r12,8(r11); - ld r2,0(r11); - mtctr r12 - bctrl + li r3,OPAL_RESYNC_TIMEBASE + bl opal_call_realmode; /* TODO: Check r3 for failure */ @@ -163,6 +214,9 @@ _GLOBAL(power7_wakeup_tb_loss) _GLOBAL(power7_wakeup_loss) ld r1,PACAR1(r13) +BEGIN_FTR_SECTION + CHECK_HMI_INTERRUPT +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) REST_NVGPRS(r1) REST_GPR(2, r1) ld r3,_CCR(r1) @@ -178,6 +232,9 @@ _GLOBAL(power7_wakeup_noloss) lbz r0,PACA_NAPSTATELOST(r13) cmpwi r0,0 bne power7_wakeup_loss +BEGIN_FTR_SECTION + CHECK_HMI_INTERRUPT +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) ld r1,PACAR1(r13) ld r4,_MSR(r1) ld r5,_NIP(r1) diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 88e3ec6e1d96..f84f799babb1 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1037,7 +1037,7 @@ int iommu_tce_build(struct iommu_table *tbl, unsigned long entry, /* if (unlikely(ret)) pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n", - __func__, hwaddr, entry << IOMMU_PAGE_SHIFT(tbl), + __func__, hwaddr, entry << tbl->it_page_shift, hwaddr, ret); */ return ret; @@ -1056,7 +1056,7 @@ int iommu_put_tce_user_mode(struct iommu_table *tbl, unsigned long entry, direction != DMA_TO_DEVICE, &page); if (unlikely(ret != 1)) { /* pr_err("iommu_tce: get_user_pages_fast failed tce=%lx ioba=%lx ret=%d\n", - tce, entry << IOMMU_PAGE_SHIFT(tbl), ret); */ + tce, entry << tbl->it_page_shift, ret); */ return -EFAULT; } hwaddr = (unsigned long) page_address(page) + offset; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 248ee7e5bebd..4c5891de162e 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -189,6 +189,11 @@ notrace unsigned int __check_irq_replay(void) } #endif /* CONFIG_PPC_BOOK3E */ + /* Check if an hypervisor Maintenance interrupt happened */ + local_paca->irq_happened &= ~PACA_IRQ_HMI; + if (happened & PACA_IRQ_HMI) + return 0xe60; + /* There should be nothing left ! */ BUG_ON(local_paca->irq_happened != 0); @@ -377,6 +382,14 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions); seq_printf(p, " Machine check exceptions\n"); + if (cpu_has_feature(CPU_FTR_HVMODE)) { + seq_printf(p, "%*s: ", prec, "HMI"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", + per_cpu(irq_stat, j).hmi_exceptions); + seq_printf(p, " Hypervisor Maintenance Interrupts\n"); + } + #ifdef CONFIG_PPC_DOORBELL if (cpu_has_feature(CPU_FTR_DBELL)) { seq_printf(p, "%*s: ", prec, "DBL"); @@ -400,6 +413,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu) sum += per_cpu(irq_stat, cpu).mce_exceptions; sum += per_cpu(irq_stat, cpu).spurious_irqs; sum += per_cpu(irq_stat, cpu).timer_irqs_others; + sum += per_cpu(irq_stat, cpu).hmi_exceptions; #ifdef CONFIG_PPC_DOORBELL sum += per_cpu(irq_stat, cpu).doorbell_irqs; #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index be99774d3f44..bf44ae962ab8 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1095,6 +1095,23 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) return 0; } +static void setup_ksp_vsid(struct task_struct *p, unsigned long sp) +{ +#ifdef CONFIG_PPC_STD_MMU_64 + unsigned long sp_vsid; + unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; + + if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) + sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T) + << SLB_VSID_SHIFT_1T; + else + sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M) + << SLB_VSID_SHIFT; + sp_vsid |= SLB_VSID_KERNEL | llp; + p->thread.ksp_vsid = sp_vsid; +#endif +} + /* * Copy a thread.. */ @@ -1174,21 +1191,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, p->thread.vr_save_area = NULL; #endif -#ifdef CONFIG_PPC_STD_MMU_64 - if (mmu_has_feature(MMU_FTR_SLB)) { - unsigned long sp_vsid; - unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; + setup_ksp_vsid(p, sp); - if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) - sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T) - << SLB_VSID_SHIFT_1T; - else - sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M) - << SLB_VSID_SHIFT; - sp_vsid |= SLB_VSID_KERNEL | llp; - p->thread.ksp_vsid = sp_vsid; - } -#endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { p->thread.dscr_inherit = current->thread.dscr_inherit; @@ -1577,7 +1581,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) struct pt_regs *regs = (struct pt_regs *) (sp + STACK_FRAME_OVERHEAD); lr = regs->link; - printk("--- Exception: %lx at %pS\n LR = %pS\n", + printk("--- interrupt: %lx at %pS\n LR = %pS\n", regs->trap, (void *)regs->nip, (void *)lr); firstframe = 1; } diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index b694b0730971..1a3b1055f5eb 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -155,7 +155,6 @@ static struct ibm_pa_feature { } ibm_pa_features[] __initdata = { {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, - {0, MMU_FTR_SLB, 0, 0, 2, 0}, {CPU_FTR_CTRL, 0, 0, 0, 3, 0}, {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0}, {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1}, @@ -309,12 +308,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node, /* Get physical cpuid */ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); - if (intserv) { - nthreads = len / sizeof(int); - } else { - intserv = of_get_flat_dt_prop(node, "reg", NULL); - nthreads = 1; - } + if (!intserv) + intserv = of_get_flat_dt_prop(node, "reg", &len); + + nthreads = len / sizeof(int); /* * Now see if any of these threads match our boot cpu. diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index e5b022c55ccd..1b0e26013a62 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -456,18 +456,20 @@ void __init smp_setup_cpu_maps(void) intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); if (intserv) { - nthreads = len / sizeof(int); DBG(" ibm,ppc-interrupt-server#s -> %d threads\n", nthreads); } else { DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n"); - intserv = of_get_property(dn, "reg", NULL); + intserv = of_get_property(dn, "reg", &len); if (!intserv) { cpu_be = cpu_to_be32(cpu); intserv = &cpu_be; /* assume logical == phys */ + len = 4; } } + nthreads = len / sizeof(int); + for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) { bool avail; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ee082d771178..d0225572faa1 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -201,7 +201,11 @@ static void cpu_ready_for_interrupts(void) /* Set IR and DR in PACA MSR */ get_paca()->kernel_msr = MSR_KERNEL; - /* Enable AIL if supported */ + /* + * Enable AIL if supported, and we are in hypervisor mode. If we are + * not in hypervisor mode, we enable relocation-on interrupts later + * in pSeries_setup_arch() using the H_SET_MODE hcall. + */ if (cpu_has_feature(CPU_FTR_HVMODE) && cpu_has_feature(CPU_FTR_ARCH_207S)) { unsigned long lpcr = mfspr(SPRN_LPCR); @@ -507,7 +511,11 @@ void __init setup_system(void) check_smt_enabled(); setup_tlb_core_data(); -#ifdef CONFIG_SMP + /* + * Freescale Book3e parts spin in a loop provided by firmware, + * so smp_release_cpus() does nothing for them + */ +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E) /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ @@ -673,9 +681,6 @@ void __init setup_arch(char **cmdline_p) exc_lvl_early_init(); emergency_stack_init(); -#ifdef CONFIG_PPC_STD_MMU_64 - stabs_alloc(); -#endif /* set up the bootmem stuff with available memory */ do_init_bootmem(); sparse_init(); diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 895c50ca943c..7ab5d434e2ee 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -39,9 +39,6 @@ .section .rodata,"a" #ifdef CONFIG_PPC64 -#define sys_sigpending sys_ni_syscall -#define sys_old_getrlimit sys_ni_syscall - .p2align 3 #endif diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 239f1cde3fff..0dc43f9932cf 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -302,6 +302,16 @@ long machine_check_early(struct pt_regs *regs) return handled; } +long hmi_exception_realmode(struct pt_regs *regs) +{ + __get_cpu_var(irq_stat).hmi_exceptions++; + + if (ppc_md.hmi_exception_early) + ppc_md.hmi_exception_early(regs); + + return 0; +} + #endif /* @@ -609,7 +619,7 @@ int machine_check_e500(struct pt_regs *regs) if (reason & MCSR_BUS_RBERR) printk("Bus - Read Data Bus Error\n"); if (reason & MCSR_BUS_WBERR) - printk("Bus - Read Data Bus Error\n"); + printk("Bus - Write Data Bus Error\n"); if (reason & MCSR_BUS_IPERR) printk("Bus - Instruction Parity Error\n"); if (reason & MCSR_BUS_RPERR) @@ -738,6 +748,20 @@ void SMIException(struct pt_regs *regs) die("System Management Interrupt", regs, SIGABRT); } +void handle_hmi_exception(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + + old_regs = set_irq_regs(regs); + irq_enter(); + + if (ppc_md.handle_hmi_exception) + ppc_md.handle_hmi_exception(regs); + + irq_exit(); + set_irq_regs(old_regs); +} + void unknown_exception(struct pt_regs *regs) { enum ctx_state prev_state = exception_enter(); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 558a67df8126..7faf8fd05738 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -159,6 +159,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL BEGIN_FTR_SECTION beq 11f + cmpwi cr2, r12, BOOK3S_INTERRUPT_HMI + beq cr2, 14f /* HMI check */ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) /* RFI into the highmem handler, or branch to interrupt handler */ @@ -179,6 +181,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) 13: b machine_check_fwnmi +14: mtspr SPRN_HSRR0, r8 + mtspr SPRN_HSRR1, r7 + b hmi_exception_after_realmode + kvmppc_primary_no_guest: /* We handle this much like a ceded vcpu */ /* set our bit in napping_threads */ diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 0860ee46013c..f09899e35991 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -461,8 +461,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) /* * Routine to copy a whole page of data, optimized for POWER4. * On POWER4 it is more than 50% faster than the simple loop - * above (following the .Ldst_aligned label) but it runs slightly - * slower on POWER3. + * above (following the .Ldst_aligned label). */ .Lcopy_page_4K: std r31,-32(1) diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 51230ee6a407..d0130fff20e5 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,9 +13,7 @@ obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ tlb_nohash_low.o obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o -obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \ - slb_low.o slb.o stab.o \ - $(hash64-y) +obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o slb_low.o slb.o $(hash64-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_hash$(CONFIG_WORD_SIZE).o \ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 88fdd9d25077..daee7f4e5a14 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -243,7 +243,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, } #ifdef CONFIG_MEMORY_HOTPLUG -static int htab_remove_mapping(unsigned long vstart, unsigned long vend, +int htab_remove_mapping(unsigned long vstart, unsigned long vend, int psize, int ssize) { unsigned long vaddr; @@ -821,21 +821,14 @@ static void __init htab_initialize(void) void __init early_init_mmu(void) { - /* Setup initial STAB address in the PACA */ - get_paca()->stab_real = __pa((u64)&initial_stab); - get_paca()->stab_addr = (u64)&initial_stab; - /* Initialize the MMU Hash table and create the linear mapping - * of memory. Has to be done before stab/slb initialization as - * this is currently where the page size encoding is obtained + * of memory. Has to be done before SLB initialization as this is + * currently where the page size encoding is obtained. */ htab_initialize(); - /* Initialize stab / SLB management */ - if (mmu_has_feature(MMU_FTR_SLB)) - slb_initialize(); - else - stab_initialize(get_paca()->stab_real); + /* Initialize SLB management */ + slb_initialize(); } #ifdef CONFIG_SMP @@ -845,13 +838,8 @@ void early_init_mmu_secondary(void) if (!firmware_has_feature(FW_FEATURE_LPAR)) mtspr(SPRN_SDR1, _SDR1); - /* Initialize STAB/SLB. We use a virtual address as it works - * in real mode on pSeries. - */ - if (mmu_has_feature(MMU_FTR_SLB)) - slb_initialize(); - else - stab_initialize(get_paca()->stab_addr); + /* Initialize SLB */ + slb_initialize(); } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index e3734edffa69..253b4b971c8a 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -175,9 +175,10 @@ static unsigned long __meminit vmemmap_section_start(unsigned long page) static int __meminit vmemmap_populated(unsigned long start, int page_size) { unsigned long end = start + page_size; + start = (unsigned long)(pfn_to_page(vmemmap_section_start(start))); for (; start < end; start += (PAGES_PER_SECTION * sizeof(struct page))) - if (pfn_valid(vmemmap_section_start(start))) + if (pfn_valid(page_to_pfn((struct page *)start))) return 1; return 0; @@ -212,6 +213,13 @@ static void __meminit vmemmap_create_mapping(unsigned long start, for (i = 0; i < page_size; i += PAGE_SIZE) BUG_ON(map_kernel_page(start + i, phys, flags)); } + +#ifdef CONFIG_MEMORY_HOTPLUG +static void vmemmap_remove_mapping(unsigned long start, + unsigned long page_size) +{ +} +#endif #else /* CONFIG_PPC_BOOK3E */ static void __meminit vmemmap_create_mapping(unsigned long start, unsigned long page_size, @@ -223,17 +231,42 @@ static void __meminit vmemmap_create_mapping(unsigned long start, mmu_kernel_ssize); BUG_ON(mapped < 0); } + +#ifdef CONFIG_MEMORY_HOTPLUG +extern int htab_remove_mapping(unsigned long vstart, unsigned long vend, + int psize, int ssize); + +static void vmemmap_remove_mapping(unsigned long start, + unsigned long page_size) +{ + int mapped = htab_remove_mapping(start, start + page_size, + mmu_vmemmap_psize, + mmu_kernel_ssize); + BUG_ON(mapped < 0); +} +#endif + #endif /* CONFIG_PPC_BOOK3E */ struct vmemmap_backing *vmemmap_list; +static struct vmemmap_backing *next; +static int num_left; +static int num_freed; static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node) { - static struct vmemmap_backing *next; - static int num_left; + struct vmemmap_backing *vmem_back; + /* get from freed entries first */ + if (num_freed) { + num_freed--; + vmem_back = next; + next = next->list; + + return vmem_back; + } /* allocate a page when required and hand out chunks */ - if (!next || !num_left) { + if (!num_left) { next = vmemmap_alloc_block(PAGE_SIZE, node); if (unlikely(!next)) { WARN_ON(1); @@ -296,10 +329,85 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) return 0; } -void vmemmap_free(unsigned long start, unsigned long end) +#ifdef CONFIG_MEMORY_HOTPLUG +static unsigned long vmemmap_list_free(unsigned long start) { + struct vmemmap_backing *vmem_back, *vmem_back_prev; + + vmem_back_prev = vmem_back = vmemmap_list; + + /* look for it with prev pointer recorded */ + for (; vmem_back; vmem_back = vmem_back->list) { + if (vmem_back->virt_addr == start) + break; + vmem_back_prev = vmem_back; + } + + if (unlikely(!vmem_back)) { + WARN_ON(1); + return 0; + } + + /* remove it from vmemmap_list */ + if (vmem_back == vmemmap_list) /* remove head */ + vmemmap_list = vmem_back->list; + else + vmem_back_prev->list = vmem_back->list; + + /* next point to this freed entry */ + vmem_back->list = next; + next = vmem_back; + num_freed++; + + return vmem_back->phys; } +void __ref vmemmap_free(unsigned long start, unsigned long end) +{ + unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift; + + start = _ALIGN_DOWN(start, page_size); + + pr_debug("vmemmap_free %lx...%lx\n", start, end); + + for (; start < end; start += page_size) { + unsigned long addr; + + /* + * the section has already be marked as invalid, so + * vmemmap_populated() true means some other sections still + * in this page, so skip it. + */ + if (vmemmap_populated(start, page_size)) + continue; + + addr = vmemmap_list_free(start); + if (addr) { + struct page *page = pfn_to_page(addr >> PAGE_SHIFT); + + if (PageReserved(page)) { + /* allocated from bootmem */ + if (page_size < PAGE_SIZE) { + /* + * this shouldn't happen, but if it is + * the case, leave the memory there + */ + WARN_ON_ONCE(1); + } else { + unsigned int nr_pages = + 1 << get_order(page_size); + while (nr_pages--) + free_reserved_page(page++); + } + } else + free_pages((unsigned long)(__va(addr)), + get_order(page_size)); + + vmemmap_remove_mapping(start, page_size); + } + } +} +#endif void register_page_bootmem_memmap(unsigned long section_nr, struct page *start_page, unsigned long size) { @@ -331,16 +439,16 @@ struct page *realmode_pfn_to_page(unsigned long pfn) if (pg_va < vmem_back->virt_addr) continue; - /* Check that page struct is not split between real pages */ - if ((pg_va + sizeof(struct page)) > - (vmem_back->virt_addr + page_size)) - return NULL; - - page = (struct page *) (vmem_back->phys + pg_va - + /* After vmemmap_list entry free is possible, need check all */ + if ((pg_va + sizeof(struct page)) <= + (vmem_back->virt_addr + page_size)) { + page = (struct page *) (vmem_back->phys + pg_va - vmem_back->virt_addr); - return page; + return page; + } } + /* Probably that page struct is split between real pages */ return NULL; } EXPORT_SYMBOL_GPL(realmode_pfn_to_page); diff --git a/arch/powerpc/mm/mmu_context_hash32.c b/arch/powerpc/mm/mmu_context_hash32.c index 78fef6726e10..aa5a7fd89461 100644 --- a/arch/powerpc/mm/mmu_context_hash32.c +++ b/arch/powerpc/mm/mmu_context_hash32.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * and 8260 implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 3b181b22cd46..d3e9a78eaed3 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -611,8 +611,8 @@ static int cpu_numa_callback(struct notifier_block *nfb, unsigned long action, case CPU_UP_CANCELED: case CPU_UP_CANCELED_FROZEN: unmap_cpu_from_node(lcpu); - break; ret = NOTIFY_OK; + break; #endif } return ret; diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 343a87fa78b5..cf11342bf519 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -41,7 +41,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ -#if defined(CONFIG_6xx) || defined(CONFIG_POWER3) +#ifdef CONFIG_6xx #define HAVE_BATS 1 #endif diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index f6ce1f111f5b..3b3c4d34c7a0 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -68,7 +68,7 @@ unsigned long ioremap_bot = IOREMAP_BASE; #ifdef CONFIG_PPC_MMU_NOHASH -static void *early_alloc_pgtable(unsigned long size) +static __ref void *early_alloc_pgtable(unsigned long size) { void *pt; diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 11571e118831..5029dc19b517 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * and 8260 implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c deleted file mode 100644 index 3f8efa6f2997..000000000000 --- a/arch/powerpc/mm/stab.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * PowerPC64 Segment Translation Support. - * - * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com - * Copyright (c) 2001 Dave Engebretsen - * - * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/memblock.h> - -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/mmu_context.h> -#include <asm/paca.h> -#include <asm/cputable.h> -#include <asm/prom.h> - -struct stab_entry { - unsigned long esid_data; - unsigned long vsid_data; -}; - -#define NR_STAB_CACHE_ENTRIES 8 -static DEFINE_PER_CPU(long, stab_cache_ptr); -static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache); - -/* - * Create a segment table entry for the given esid/vsid pair. - */ -static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid) -{ - unsigned long esid_data, vsid_data; - unsigned long entry, group, old_esid, castout_entry, i; - unsigned int global_entry; - struct stab_entry *ste, *castout_ste; - unsigned long kernel_segment = (esid << SID_SHIFT) >= PAGE_OFFSET; - - vsid_data = vsid << STE_VSID_SHIFT; - esid_data = esid << SID_SHIFT | STE_ESID_KP | STE_ESID_V; - if (! kernel_segment) - esid_data |= STE_ESID_KS; - - /* Search the primary group first. */ - global_entry = (esid & 0x1f) << 3; - ste = (struct stab_entry *)(stab | ((esid & 0x1f) << 7)); - - /* Find an empty entry, if one exists. */ - for (group = 0; group < 2; group++) { - for (entry = 0; entry < 8; entry++, ste++) { - if (!(ste->esid_data & STE_ESID_V)) { - ste->vsid_data = vsid_data; - eieio(); - ste->esid_data = esid_data; - return (global_entry | entry); - } - } - /* Now search the secondary group. */ - global_entry = ((~esid) & 0x1f) << 3; - ste = (struct stab_entry *)(stab | (((~esid) & 0x1f) << 7)); - } - - /* - * Could not find empty entry, pick one with a round robin selection. - * Search all entries in the two groups. - */ - castout_entry = get_paca()->stab_rr; - for (i = 0; i < 16; i++) { - if (castout_entry < 8) { - global_entry = (esid & 0x1f) << 3; - ste = (struct stab_entry *)(stab | ((esid & 0x1f) << 7)); - castout_ste = ste + castout_entry; - } else { - global_entry = ((~esid) & 0x1f) << 3; - ste = (struct stab_entry *)(stab | (((~esid) & 0x1f) << 7)); - castout_ste = ste + (castout_entry - 8); - } - - /* Dont cast out the first kernel segment */ - if ((castout_ste->esid_data & ESID_MASK) != PAGE_OFFSET) - break; - - castout_entry = (castout_entry + 1) & 0xf; - } - - get_paca()->stab_rr = (castout_entry + 1) & 0xf; - - /* Modify the old entry to the new value. */ - - /* Force previous translations to complete. DRENG */ - asm volatile("isync" : : : "memory"); - - old_esid = castout_ste->esid_data >> SID_SHIFT; - castout_ste->esid_data = 0; /* Invalidate old entry */ - - asm volatile("sync" : : : "memory"); /* Order update */ - - castout_ste->vsid_data = vsid_data; - eieio(); /* Order update */ - castout_ste->esid_data = esid_data; - - asm volatile("slbie %0" : : "r" (old_esid << SID_SHIFT)); - /* Ensure completion of slbie */ - asm volatile("sync" : : : "memory"); - - return (global_entry | (castout_entry & 0x7)); -} - -/* - * Allocate a segment table entry for the given ea and mm - */ -static int __ste_allocate(unsigned long ea, struct mm_struct *mm) -{ - unsigned long vsid; - unsigned char stab_entry; - unsigned long offset; - - /* Kernel or user address? */ - if (is_kernel_addr(ea)) { - vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M); - } else { - if ((ea >= TASK_SIZE_USER64) || (! mm)) - return 1; - - vsid = get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M); - } - - stab_entry = make_ste(get_paca()->stab_addr, GET_ESID(ea), vsid); - - if (!is_kernel_addr(ea)) { - offset = __get_cpu_var(stab_cache_ptr); - if (offset < NR_STAB_CACHE_ENTRIES) - __get_cpu_var(stab_cache[offset++]) = stab_entry; - else - offset = NR_STAB_CACHE_ENTRIES+1; - __get_cpu_var(stab_cache_ptr) = offset; - - /* Order update */ - asm volatile("sync":::"memory"); - } - - return 0; -} - -int ste_allocate(unsigned long ea) -{ - return __ste_allocate(ea, current->mm); -} - -/* - * Do the segment table work for a context switch: flush all user - * entries from the table, then preload some probably useful entries - * for the new task - */ -void switch_stab(struct task_struct *tsk, struct mm_struct *mm) -{ - struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr; - struct stab_entry *ste; - unsigned long offset; - unsigned long pc = KSTK_EIP(tsk); - unsigned long stack = KSTK_ESP(tsk); - unsigned long unmapped_base; - - /* Force previous translations to complete. DRENG */ - asm volatile("isync" : : : "memory"); - - /* - * We need interrupts hard-disabled here, not just soft-disabled, - * so that a PMU interrupt can't occur, which might try to access - * user memory (to get a stack trace) and possible cause an STAB miss - * which would update the stab_cache/stab_cache_ptr per-cpu variables. - */ - hard_irq_disable(); - - offset = __get_cpu_var(stab_cache_ptr); - if (offset <= NR_STAB_CACHE_ENTRIES) { - int i; - - for (i = 0; i < offset; i++) { - ste = stab + __get_cpu_var(stab_cache[i]); - ste->esid_data = 0; /* invalidate entry */ - } - } else { - unsigned long entry; - - /* Invalidate all entries. */ - ste = stab; - - /* Never flush the first entry. */ - ste += 1; - for (entry = 1; - entry < (HW_PAGE_SIZE / sizeof(struct stab_entry)); - entry++, ste++) { - unsigned long ea; - ea = ste->esid_data & ESID_MASK; - if (!is_kernel_addr(ea)) { - ste->esid_data = 0; - } - } - } - - asm volatile("sync; slbia; sync":::"memory"); - - __get_cpu_var(stab_cache_ptr) = 0; - - /* Now preload some entries for the new task */ - if (test_tsk_thread_flag(tsk, TIF_32BIT)) - unmapped_base = TASK_UNMAPPED_BASE_USER32; - else - unmapped_base = TASK_UNMAPPED_BASE_USER64; - - __ste_allocate(pc, mm); - - if (GET_ESID(pc) == GET_ESID(stack)) - return; - - __ste_allocate(stack, mm); - - if ((GET_ESID(pc) == GET_ESID(unmapped_base)) - || (GET_ESID(stack) == GET_ESID(unmapped_base))) - return; - - __ste_allocate(unmapped_base, mm); - - /* Order update */ - asm volatile("sync" : : : "memory"); -} - -/* - * Allocate segment tables for secondary CPUs. These must all go in - * the first (bolted) segment, so that do_stab_bolted won't get a - * recursive segment miss on the segment table itself. - */ -void __init stabs_alloc(void) -{ - int cpu; - - if (mmu_has_feature(MMU_FTR_SLB)) - return; - - for_each_possible_cpu(cpu) { - unsigned long newstab; - - if (cpu == 0) - continue; /* stab for CPU 0 is statically allocated */ - - newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE, - 1<<SID_SHIFT); - newstab = (unsigned long)__va(newstab); - - memset((void *)newstab, 0, HW_PAGE_SIZE); - - paca[cpu].stab_addr = newstab; - paca[cpu].stab_real = __pa(newstab); - printk(KERN_INFO "Segment table for CPU %d at 0x%llx " - "virtual, 0x%llx absolute\n", - cpu, paca[cpu].stab_addr, paca[cpu].stab_real); - } -} - -/* - * Build an entry for the base kernel segment and put it into - * the segment table or SLB. All other segment table or SLB - * entries are faulted in. - */ -void stab_initialize(unsigned long stab) -{ - unsigned long vsid = get_kernel_vsid(PAGE_OFFSET, MMU_SEGSIZE_256M); - unsigned long stabreal; - - asm volatile("isync; slbia; isync":::"memory"); - make_ste(stab, GET_ESID(PAGE_OFFSET), vsid); - - /* Order update */ - asm volatile("sync":::"memory"); - - /* Set ASR */ - stabreal = get_paca()->stab_real | 0x1ul; - - mtspr(SPRN_ASR, stabreal); -} diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 356e8b41fb09..89bf95bd63b1 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -296,9 +296,12 @@ itlb_miss_fault_bolted: * r14 = page table base * r13 = PACA * r11 = tlb_per_core ptr - * r10 = cpu number + * r10 = crap (free to use) */ tlb_miss_common_e6500: + crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */ + +BEGIN_FTR_SECTION /* CPU_FTR_SMT */ /* * Search if we already have an indirect entry for that virtual * address, and if we do, bail out. @@ -309,6 +312,7 @@ tlb_miss_common_e6500: lhz r10,PACAPACAINDEX(r13) cmpdi r15,0 cmpdi cr1,r15,1 /* set cr1.eq = 0 for non-recursive */ + addi r10,r10,1 bne 2f stbcx. r10,0,r11 bne 1b @@ -322,18 +326,62 @@ tlb_miss_common_e6500: b 1b .previous + /* + * Erratum A-008139 says that we can't use tlbwe to change + * an indirect entry in any way (including replacing or + * invalidating) if the other thread could be in the process + * of a lookup. The workaround is to invalidate the entry + * with tlbilx before overwriting. + */ + + lbz r15,TCD_ESEL_NEXT(r11) + rlwinm r10,r15,16,0xff0000 + oris r10,r10,MAS0_TLBSEL(1)@h + mtspr SPRN_MAS0,r10 + isync + tlbre + mfspr r15,SPRN_MAS1 + andis. r15,r15,MAS1_VALID@h + beq 5f + +BEGIN_FTR_SECTION_NESTED(532) + mfspr r10,SPRN_MAS8 + rlwinm r10,r10,0,0x80000fff /* tgs,tlpid -> sgs,slpid */ + mtspr SPRN_MAS5,r10 +END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532) + + mfspr r10,SPRN_MAS1 + rlwinm r15,r10,0,0x3fff0000 /* tid -> spid */ + rlwimi r15,r10,20,0x00000003 /* ind,ts -> sind,sas */ + mfspr r10,SPRN_MAS6 + mtspr SPRN_MAS6,r15 + mfspr r15,SPRN_MAS2 + isync + tlbilxva 0,r15 + isync + + mtspr SPRN_MAS6,r10 + +5: +BEGIN_FTR_SECTION_NESTED(532) + li r10,0 + mtspr SPRN_MAS8,r10 + mtspr SPRN_MAS5,r10 +END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532) tlbsx 0,r16 mfspr r10,SPRN_MAS1 - andis. r10,r10,MAS1_VALID@h + andis. r15,r10,MAS1_VALID@h bne tlb_miss_done_e6500 - - /* Undo MAS-damage from the tlbsx */ +FTR_SECTION_ELSE mfspr r10,SPRN_MAS1 +ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT) + oris r10,r10,MAS1_VALID@h - mtspr SPRN_MAS1,r10 - mtspr SPRN_MAS2,r15 + beq cr2,4f + rlwinm r10,r10,0,16,1 /* Clear TID */ +4: mtspr SPRN_MAS1,r10 /* Now, we need to walk the page tables. First check if we are in * range. @@ -394,11 +442,13 @@ tlb_miss_common_e6500: tlb_miss_done_e6500: .macro tlb_unlock_e6500 +BEGIN_FTR_SECTION beq cr1,1f /* no unlock if lock was recursively grabbed */ li r15,0 isync stb r15,0(r11) 1: +END_FTR_SECTION_IFSET(CPU_FTR_SMT) .endm tlb_unlock_e6500 @@ -407,12 +457,9 @@ tlb_miss_done_e6500: rfi tlb_miss_kernel_e6500: - mfspr r10,SPRN_MAS1 ld r14,PACA_KERNELPGD(r13) - cmpldi cr0,r15,8 /* Check for vmalloc region */ - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - beq+ tlb_miss_common_e6500 + cmpldi cr1,r15,8 /* Check for vmalloc region */ + beq+ cr1,tlb_miss_common_e6500 tlb_miss_fault_e6500: tlb_unlock_e6500 diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 751ec7bd5018..cedbbeced632 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -14,6 +14,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \ cell/spu_profiler.o cell/vma_map.o \ cell/spu_task_sync.o -oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o +oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index c77348c5d463..bf094c5a4bd9 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -205,9 +205,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->sync_stop = model->sync_stop; break; #endif - case PPC_OPROFILE_RS64: - model = &op_model_rs64; - break; case PPC_OPROFILE_POWER4: model = &op_model_power4; break; diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c deleted file mode 100644 index 7e5b8ed3a1b7..000000000000 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/oprofile.h> -#include <linux/smp.h> -#include <asm/ptrace.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/oprofile_impl.h> - -#define dbg(args...) - -static void ctrl_write(unsigned int i, unsigned int val) -{ - unsigned int tmp = 0; - unsigned long shift = 0, mask = 0; - - dbg("ctrl_write %d %x\n", i, val); - - switch(i) { - case 0: - tmp = mfspr(SPRN_MMCR0); - shift = 6; - mask = 0x7F; - break; - case 1: - tmp = mfspr(SPRN_MMCR0); - shift = 0; - mask = 0x3F; - break; - case 2: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 4; - mask = 0x1F; - break; - case 3: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 9; - mask = 0x1F; - break; - case 4: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 14; - mask = 0x1F; - break; - case 5: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 19; - mask = 0x1F; - break; - case 6: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 24; - mask = 0x1F; - break; - case 7: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 28; - mask = 0xF; - break; - } - - tmp = tmp & ~(mask << shift); - tmp |= val << shift; - - switch(i) { - case 0: - case 1: - mtspr(SPRN_MMCR0, tmp); - break; - default: - mtspr(SPRN_MMCR1, tmp); - } - - dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0), - mfspr(SPRN_MMCR1)); -} - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int num_counters; - -static int rs64_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - num_counters = num_ctrs; - - for (i = 0; i < num_counters; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* XXX setup user and kernel profiling */ - return 0; -} - -static int rs64_cpu_setup(struct op_counter_config *ctr) -{ - unsigned int mmcr0; - - /* reset MMCR0 and set the freeze bit */ - mmcr0 = MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - /* reset MMCR1, MMCRA */ - mtspr(SPRN_MMCR1, 0); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - mtspr(SPRN_MMCRA, 0); - - mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; - /* Only applies to POWER3, but should be safe on RS64 */ - mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR0)); - dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR1)); - - return 0; -} - -static int rs64_start(struct op_counter_config *ctr) -{ - int i; - unsigned int mmcr0; - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - if (ctr[i].enabled) { - classic_ctr_write(i, reset_value[i]); - ctrl_write(i, ctr[i].event); - } else { - classic_ctr_write(i, 0); - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this excetion, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - return 0; -} - -static void rs64_stop(void) -{ - unsigned int mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_MMCR0); - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - - mb(); -} - -static void rs64_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned int mmcr0; - int is_kernel; - int val; - int i; - unsigned long pc = mfspr(SPRN_SIAR); - - is_kernel = is_kernel_addr(pc); - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - val = classic_ctr_read(i); - if (val < 0) { - if (ctr[i].enabled) { - oprofile_add_ext_sample(pc, regs, i, is_kernel); - classic_ctr_write(i, reset_value[i]); - } else { - classic_ctr_write(i, 0); - } - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* reset the perfmon trigger */ - mmcr0 |= MMCR0_PMXE; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this exception, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_rs64 = { - .reg_setup = rs64_reg_setup, - .cpu_setup = rs64_cpu_setup, - .start = rs64_start, - .stop = rs64_stop, - .handle_interrupt = rs64_handle_interrupt, -}; diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index fe52db2eea6a..b7cd00b0171e 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -36,7 +36,12 @@ struct cpu_hw_events { struct perf_event *event[MAX_HWEVENTS]; u64 events[MAX_HWEVENTS]; unsigned int flags[MAX_HWEVENTS]; - unsigned long mmcr[3]; + /* + * The order of the MMCR array is: + * - 64-bit, MMCR0, MMCR1, MMCRA, MMCR2 + * - 32-bit, MMCR0, MMCR1, MMCR2 + */ + unsigned long mmcr[4]; struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS]; u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; @@ -112,9 +117,9 @@ static bool is_ebb_event(struct perf_event *event) { return false; } static int ebb_event_check(struct perf_event *event) { return 0; } static void ebb_event_add(struct perf_event *event) { } static void ebb_switch_out(unsigned long mmcr0) { } -static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0) +static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw) { - return mmcr0; + return cpuhw->mmcr[0]; } static inline void power_pmu_bhrb_enable(struct perf_event *event) {} @@ -542,8 +547,10 @@ static void ebb_switch_out(unsigned long mmcr0) current->thread.mmcr2 = mfspr(SPRN_MMCR2) & MMCR2_USER_MASK; } -static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0) +static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw) { + unsigned long mmcr0 = cpuhw->mmcr[0]; + if (!ebb) goto out; @@ -568,7 +575,15 @@ static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0) mtspr(SPRN_SIAR, current->thread.siar); mtspr(SPRN_SIER, current->thread.sier); mtspr(SPRN_SDAR, current->thread.sdar); - mtspr(SPRN_MMCR2, current->thread.mmcr2); + + /* + * Merge the kernel & user values of MMCR2. The semantics we implement + * are that the user MMCR2 can set bits, ie. cause counters to freeze, + * but not clear bits. If a task wants to be able to clear bits, ie. + * unfreeze counters, it should not set exclude_xxx in its events and + * instead manage the MMCR2 entirely by itself. + */ + mtspr(SPRN_MMCR2, cpuhw->mmcr[3] | current->thread.mmcr2); out: return mmcr0; } @@ -915,6 +930,14 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[], int i, n, first; struct perf_event *event; + /* + * If the PMU we're on supports per event exclude settings then we + * don't need to do any of this logic. NB. This assumes no PMU has both + * per event exclude and limited PMCs. + */ + if (ppmu->flags & PPMU_ARCH_207S) + return 0; + n = n_prev + n_new; if (n <= 1) return 0; @@ -1219,28 +1242,31 @@ static void power_pmu_enable(struct pmu *pmu) } /* - * Compute MMCR* values for the new set of events + * Clear all MMCR settings and recompute them for the new set of events. */ + memset(cpuhw->mmcr, 0, sizeof(cpuhw->mmcr)); + if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index, - cpuhw->mmcr)) { + cpuhw->mmcr, cpuhw->event)) { /* shouldn't ever get here */ printk(KERN_ERR "oops compute_mmcr failed\n"); goto out; } - /* - * Add in MMCR0 freeze bits corresponding to the - * attr.exclude_* bits for the first event. - * We have already checked that all events have the - * same values for these bits as the first event. - */ - event = cpuhw->event[0]; - if (event->attr.exclude_user) - cpuhw->mmcr[0] |= MMCR0_FCP; - if (event->attr.exclude_kernel) - cpuhw->mmcr[0] |= freeze_events_kernel; - if (event->attr.exclude_hv) - cpuhw->mmcr[0] |= MMCR0_FCHV; + if (!(ppmu->flags & PPMU_ARCH_207S)) { + /* + * Add in MMCR0 freeze bits corresponding to the attr.exclude_* + * bits for the first event. We have already checked that all + * events have the same value for these bits as the first event. + */ + event = cpuhw->event[0]; + if (event->attr.exclude_user) + cpuhw->mmcr[0] |= MMCR0_FCP; + if (event->attr.exclude_kernel) + cpuhw->mmcr[0] |= freeze_events_kernel; + if (event->attr.exclude_hv) + cpuhw->mmcr[0] |= MMCR0_FCHV; + } /* * Write the new configuration to MMCR* with the freeze @@ -1252,6 +1278,8 @@ static void power_pmu_enable(struct pmu *pmu) mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) | MMCR0_FC); + if (ppmu->flags & PPMU_ARCH_207S) + mtspr(SPRN_MMCR2, cpuhw->mmcr[3]); /* * Read off any pre-existing events that need to move @@ -1307,10 +1335,7 @@ static void power_pmu_enable(struct pmu *pmu) out_enable: pmao_restore_workaround(ebb); - if (ppmu->flags & PPMU_ARCH_207S) - mtspr(SPRN_MMCR2, 0); - - mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]); + mmcr0 = ebb_switch_in(ebb, cpuhw); mb(); if (cpuhw->bhrb_users) diff --git a/arch/powerpc/perf/mpc7450-pmu.c b/arch/powerpc/perf/mpc7450-pmu.c index fe21b515ca44..d115c5635bf3 100644 --- a/arch/powerpc/perf/mpc7450-pmu.c +++ b/arch/powerpc/perf/mpc7450-pmu.c @@ -260,8 +260,9 @@ static const u32 pmcsel_mask[N_COUNTER] = { /* * Compute MMCR0/1/2 values for a set of events. */ -static int mpc7450_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) +static int mpc7450_compute_mmcr(u64 event[], int n_ev, unsigned int hwc[], + unsigned long mmcr[], + struct perf_event *pevents[]) { u8 event_index[N_CLASSES][N_COUNTER]; int n_classevent[N_CLASSES]; diff --git a/arch/powerpc/perf/power4-pmu.c b/arch/powerpc/perf/power4-pmu.c index 9103a1de864d..ce6072fa481b 100644 --- a/arch/powerpc/perf/power4-pmu.c +++ b/arch/powerpc/perf/power4-pmu.c @@ -356,7 +356,7 @@ static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[]) } static int p4_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; unsigned int pmc, unit, byte, psel, lower; diff --git a/arch/powerpc/perf/power5+-pmu.c b/arch/powerpc/perf/power5+-pmu.c index b03b6dc0172d..0526dac66007 100644 --- a/arch/powerpc/perf/power5+-pmu.c +++ b/arch/powerpc/perf/power5+-pmu.c @@ -452,7 +452,7 @@ static int power5p_marked_instr_event(u64 event) } static int power5p_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr1 = 0; unsigned long mmcra = 0; diff --git a/arch/powerpc/perf/power5-pmu.c b/arch/powerpc/perf/power5-pmu.c index 1e8ce423c3af..4dc99f9f7962 100644 --- a/arch/powerpc/perf/power5-pmu.c +++ b/arch/powerpc/perf/power5-pmu.c @@ -383,7 +383,7 @@ static int power5_marked_instr_event(u64 event) } static int power5_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr1 = 0; unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS; diff --git a/arch/powerpc/perf/power6-pmu.c b/arch/powerpc/perf/power6-pmu.c index 31128e086fed..9c9d646b68a1 100644 --- a/arch/powerpc/perf/power6-pmu.c +++ b/arch/powerpc/perf/power6-pmu.c @@ -175,7 +175,7 @@ static int power6_marked_instr_event(u64 event) * Assign PMC numbers and compute MMCR1 value for a set of events */ static int p6_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr1 = 0; unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS; diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c index 56c67bca2f75..5b62f2389290 100644 --- a/arch/powerpc/perf/power7-pmu.c +++ b/arch/powerpc/perf/power7-pmu.c @@ -245,7 +245,7 @@ static int power7_marked_instr_event(u64 event) } static int power7_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr1 = 0; unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS; diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index 639cd9156585..396351db601b 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/perf_event.h> #include <asm/firmware.h> +#include <asm/cputable.h> /* @@ -266,6 +267,11 @@ #define MMCRA_SDAR_MODE_TLB (1ull << 42) #define MMCRA_IFM_SHIFT 30 +/* Bits in MMCR2 for POWER8 */ +#define MMCR2_FCS(pmc) (1ull << (63 - (((pmc) - 1) * 9))) +#define MMCR2_FCP(pmc) (1ull << (62 - (((pmc) - 1) * 9))) +#define MMCR2_FCH(pmc) (1ull << (57 - (((pmc) - 1) * 9))) + static inline bool event_is_fab_match(u64 event) { @@ -393,9 +399,10 @@ static int power8_get_constraint(u64 event, unsigned long *maskp, unsigned long } static int power8_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], + struct perf_event *pevents[]) { - unsigned long mmcra, mmcr1, unit, combine, psel, cache, val; + unsigned long mmcra, mmcr1, mmcr2, unit, combine, psel, cache, val; unsigned int pmc, pmc_inuse; int i; @@ -410,7 +417,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev, /* In continous sampling mode, update SDAR on TLB miss */ mmcra = MMCRA_SDAR_MODE_TLB; - mmcr1 = 0; + mmcr1 = mmcr2 = 0; /* Second pass: assign PMCs, set all MMCR1 fields */ for (i = 0; i < n_ev; ++i) { @@ -472,6 +479,19 @@ static int power8_compute_mmcr(u64 event[], int n_ev, mmcra |= val << MMCRA_IFM_SHIFT; } + if (pevents[i]->attr.exclude_user) + mmcr2 |= MMCR2_FCP(pmc); + + if (pevents[i]->attr.exclude_hv) + mmcr2 |= MMCR2_FCH(pmc); + + if (pevents[i]->attr.exclude_kernel) { + if (cpu_has_feature(CPU_FTR_HVMODE)) + mmcr2 |= MMCR2_FCH(pmc); + else + mmcr2 |= MMCR2_FCS(pmc); + } + hwc[i] = pmc - 1; } @@ -491,6 +511,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev, mmcr[1] = mmcr1; mmcr[2] = mmcra; + mmcr[3] = mmcr2; return 0; } diff --git a/arch/powerpc/perf/ppc970-pmu.c b/arch/powerpc/perf/ppc970-pmu.c index 20139ceeacf6..8b6a8a36fa38 100644 --- a/arch/powerpc/perf/ppc970-pmu.c +++ b/arch/powerpc/perf/ppc970-pmu.c @@ -257,7 +257,7 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[]) } static int p970_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]) + unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) { unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; unsigned int pmc, unit, byte, psel; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f442120e0033..0c1e6903597e 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -274,7 +274,7 @@ config CORENET_GENERIC For 32bit kernel, the following boards are supported: P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080 For 64bit kernel, the following boards are supported: - T4240 QDS and B4 QDS + T208x QDS/RDB, T4240 QDS/RDB and B4 QDS The following boards are supported for both 32bit and 64bit kernel: P5020 DS, P5040 DS and T104xQDS diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 5db1e117fdde..d22dd85e50bf 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -119,7 +119,11 @@ static const char * const boards[] __initconst = { "fsl,P4080DS", "fsl,P5020DS", "fsl,P5040DS", + "fsl,T2080QDS", + "fsl,T2080RDB", + "fsl,T2081QDS", "fsl,T4240QDS", + "fsl,T4240RDB", "fsl,B4860QDS", "fsl,B4420QDS", "fsl,B4220QDS", @@ -129,28 +133,14 @@ static const char * const boards[] __initconst = { NULL }; -static const char * const hv_boards[] __initconst = { - "fsl,P2041RDB-hv", - "fsl,P3041DS-hv", - "fsl,OCA4080-hv", - "fsl,P4080DS-hv", - "fsl,P5020DS-hv", - "fsl,P5040DS-hv", - "fsl,T4240QDS-hv", - "fsl,B4860QDS-hv", - "fsl,B4420QDS-hv", - "fsl,B4220QDS-hv", - "fsl,T1040QDS-hv", - "fsl,T1042QDS-hv", - NULL -}; - /* * Called very early, device-tree isn't unflattened */ static int __init corenet_generic_probe(void) { unsigned long root = of_get_flat_dt_root(); + char hv_compat[24]; + int i; #ifdef CONFIG_SMP extern struct smp_ops_t smp_85xx_ops; #endif @@ -159,21 +149,26 @@ static int __init corenet_generic_probe(void) return 1; /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_match(root, hv_boards)) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; + for (i = 0; boards[i]; i++) { + snprintf(hv_compat, sizeof(hv_compat), "%s-hv", boards[i]); + if (of_flat_dt_is_compatible(root, hv_compat)) { + ppc_md.init_IRQ = ehv_pic_init; + + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; #ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; + /* + * Disable the timebase sync operations because we + * can't write to the timebase registers under the + * hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; #endif - return 1; + return 1; + } } return 0; diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index ba093f553678..d7c1e69f3070 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -28,6 +28,7 @@ #include <asm/dbell.h> #include <asm/fsl_guts.h> #include <asm/code-patching.h> +#include <asm/cputhreads.h> #include <sysdev/fsl_soc.h> #include <sysdev/mpic.h> @@ -168,6 +169,24 @@ static inline u32 read_spin_table_addr_l(void *spin_table) return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l); } +#ifdef CONFIG_PPC64 +static void wake_hw_thread(void *info) +{ + void fsl_secondary_thread_init(void); + unsigned long imsr1, inia1; + int nr = *(const int *)info; + + imsr1 = MSR_KERNEL; + inia1 = *(unsigned long *)fsl_secondary_thread_init; + + mttmr(TMRN_IMSR1, imsr1); + mttmr(TMRN_INIA1, inia1); + mtspr(SPRN_TENS, TEN_THREAD(1)); + + smp_generic_kick_cpu(nr); +} +#endif + static int smp_85xx_kick_cpu(int nr) { unsigned long flags; @@ -183,6 +202,31 @@ static int smp_85xx_kick_cpu(int nr) pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); +#ifdef CONFIG_PPC64 + /* Threads don't use the spin table */ + if (cpu_thread_in_core(nr) != 0) { + int primary = cpu_first_thread_sibling(nr); + + if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT))) + return -ENOENT; + + if (cpu_thread_in_core(nr) != 1) { + pr_err("%s: cpu %d: invalid hw thread %d\n", + __func__, nr, cpu_thread_in_core(nr)); + return -ENOENT; + } + + if (!cpu_online(primary)) { + pr_err("%s: cpu %d: primary %d not online\n", + __func__, nr, primary); + return -ENOENT; + } + + smp_call_function_single(primary, wake_hw_thread, &nr, 0); + return 0; + } +#endif + np = of_get_cpu_node(nr, NULL); cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 587a2828b06c..d3037747031d 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -18,7 +18,6 @@ #include <linux/fsl_devices.h> #include <asm/io.h> -#include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/prom.h> #include <asm/fs_pd.h> @@ -28,8 +27,6 @@ #include "mpc8xx.h" -struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; - extern int cpm_pic_init(void); extern int cpm_get_irq(void); diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index c1262581b63c..5921dcb498fd 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -35,7 +35,6 @@ #include <asm/page.h> #include <asm/processor.h> #include <asm/time.h> -#include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/cpm1.h> #include <asm/fs_pd.h> @@ -46,61 +45,6 @@ static u32 __iomem *bcsr, *bcsr5; -#ifdef CONFIG_PCMCIA_M8XX -static void pcmcia_hw_setup(int slot, int enable) -{ - if (enable) - clrbits32(&bcsr[1], BCSR1_PCCEN); - else - setbits32(&bcsr[1], BCSR1_PCCEN); -} - -static int pcmcia_set_voltage(int slot, int vcc, int vpp) -{ - u32 reg = 0; - - switch (vcc) { - case 0: - break; - case 33: - reg |= BCSR1_PCCVCC0; - break; - case 50: - reg |= BCSR1_PCCVCC1; - break; - default: - return 1; - } - - switch (vpp) { - case 0: - break; - case 33: - case 50: - if (vcc == vpp) - reg |= BCSR1_PCCVPP1; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= BCSR1_PCCVPP0; - else - return 1; - default: - return 1; - } - - /* first, turn off all power */ - clrbits32(&bcsr[1], 0x00610000); - - /* enable new powersettings */ - setbits32(&bcsr[1], reg); - - return 0; -} -#endif - struct cpm_pin { int port, pin, flags; }; @@ -245,12 +189,6 @@ static void __init mpc885ads_setup_arch(void) of_detach_node(np); of_node_put(np); } - -#ifdef CONFIG_PCMCIA_M8XX - /* Set up board specific hook-ups.*/ - m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup; - m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage; -#endif } static int __init mpc885ads_probe(void) diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c index 251aba8759e4..dda607807def 100644 --- a/arch/powerpc/platforms/8xx/tqm8xx_setup.c +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -37,7 +37,6 @@ #include <asm/page.h> #include <asm/processor.h> #include <asm/time.h> -#include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/cpm1.h> #include <asm/fs_pd.h> diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index a41bd023647a..e8bc40869cbd 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -61,7 +61,7 @@ choice help There are two families of 64 bit PowerPC chips supported. The most common ones are the desktop and server CPUs - (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...) + (POWER4, POWER5, 970, POWER5+, POWER6, POWER7, POWER8 ...) The other are the "embedded" processors compliant with the "Book 3E" variant of the architecture @@ -140,14 +140,6 @@ config 6xx depends on PPC32 && PPC_BOOK3S select PPC_HAVE_PMU_SUPPORT -config POWER3 - depends on PPC64 && PPC_BOOK3S - def_bool y - -config POWER4 - depends on PPC64 && PPC_BOOK3S - def_bool y - config TUNE_CELL bool "Optimize for Cell Broadband Engine" depends on PPC64 && PPC_BOOK3S @@ -244,7 +236,7 @@ config PHYS_64BIT config ALTIVEC bool "AltiVec Support" - depends on 6xx || POWER4 || (PPC_E500MC && PPC64) + depends on 6xx || PPC_BOOK3S_64 || (PPC_E500MC && PPC64) ---help--- This option enables kernel support for the Altivec extensions to the PowerPC processor. The kernel currently supports saving and restoring @@ -260,7 +252,7 @@ config ALTIVEC config VSX bool "VSX Support" - depends on POWER4 && ALTIVEC && PPC_FPU + depends on PPC_BOOK3S_64 && ALTIVEC && PPC_FPU ---help--- This option enables kernel support for the Vector Scaler extensions @@ -276,7 +268,7 @@ config VSX config PPC_ICSWX bool "Support for PowerPC icswx coprocessor instruction" - depends on POWER4 + depends on PPC_BOOK3S_64 default n ---help--- @@ -294,7 +286,7 @@ config PPC_ICSWX config PPC_ICSWX_PID bool "icswx requires direct PID management" - depends on PPC_ICSWX && POWER4 + depends on PPC_ICSWX default y ---help--- The PID register in server is used explicitly for ICSWX. In diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig index 1afd10f67858..607124bae2e7 100644 --- a/arch/powerpc/platforms/powermac/Kconfig +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -10,7 +10,7 @@ config PPC_PMAC config PPC_PMAC64 bool - depends on PPC_PMAC && POWER4 + depends on PPC_PMAC && PPC64 select MPIC select U3_DART select MPIC_U3_HT_IRQS diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 63d82bbc05e9..1413e72bc2e1 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -158,7 +158,7 @@ static inline int simple_feature_tweak(struct device_node *node, int type, return 0; } -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 static long ohare_htw_scc_enable(struct device_node *node, long param, long value) @@ -1318,7 +1318,7 @@ intrepid_aack_delay_enable(struct device_node *node, long param, long value) } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static long core99_read_gpio(struct device_node *node, long param, long value) @@ -1338,7 +1338,7 @@ core99_write_gpio(struct device_node *node, long param, long value) return 0; } -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 static long g5_gmac_enable(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; @@ -1550,9 +1550,9 @@ void g5_phy_disable_cpu1(void) if (uninorth_maj == 3) UN_OUT(U3_API_PHY_CONFIG_1, 0); } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 #ifdef CONFIG_PM @@ -1864,7 +1864,7 @@ core99_sleep_state(struct device_node *node, long param, long value) return 0; } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static long generic_dev_can_wake(struct device_node *node, long param, long value) @@ -1906,7 +1906,7 @@ static struct feature_table_entry any_features[] = { { 0, NULL } }; -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* OHare based motherboards. Currently, we only use these on the * 2400,3400 and 3500 series powerbooks. Some older desktops seem @@ -2056,7 +2056,7 @@ static struct feature_table_entry intrepid_features[] = { { 0, NULL } }; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ /* G5 features */ @@ -2074,10 +2074,10 @@ static struct feature_table_entry g5_features[] = { { 0, NULL } }; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static struct pmac_mb_def pmac_mb_defs[] = { -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* * Desktops */ @@ -2342,7 +2342,7 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ { "PowerMac7,2", "PowerMac G5", PMAC_TYPE_POWERMAC_G5, g5_features, 0, @@ -2373,7 +2373,7 @@ static struct pmac_mb_def pmac_mb_defs[] = { 0, }, #endif /* CONFIG_PPC64 */ -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ }; /* @@ -2441,7 +2441,7 @@ static int __init probe_motherboard(void) /* Fallback to selection depending on mac-io chip type */ switch(macio->type) { -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 case macio_grand_central: pmac_mb.model_id = PMAC_TYPE_PSURGE; pmac_mb.model_name = "Unknown PowerSurge"; @@ -2475,7 +2475,7 @@ static int __init probe_motherboard(void) pmac_mb.model_name = "Unknown Intrepid-based"; pmac_mb.features = intrepid_features; break; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ case macio_keylargo2: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; pmac_mb.model_name = "Unknown K2-based"; @@ -2486,13 +2486,13 @@ static int __init probe_motherboard(void) pmac_mb.model_name = "Unknown Shasta-based"; pmac_mb.features = g5_features; break; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ default: ret = -ENODEV; goto done; } found: -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* Fixup Hooper vs. Comet */ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); @@ -2546,9 +2546,9 @@ found: */ powersave_lowspeed = 1; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ powersave_nap = 1; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ /* Check for "mobile" machine */ if (model && (strncmp(model, "PowerBook", 9) == 0 @@ -2786,7 +2786,7 @@ set_initial_features(void) MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); } -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (macio_chips[0].type == macio_keylargo2 || macio_chips[0].type == macio_shasta) { #ifndef CONFIG_SMP @@ -2826,7 +2826,7 @@ set_initial_features(void) np = of_find_node_by_name(np, "firewire"); } } -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ if (macio_chips[0].type == macio_keylargo || macio_chips[0].type == macio_pangea || @@ -2895,7 +2895,7 @@ set_initial_features(void) MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ /* On all machines, switch modem & serial ports off */ for_each_node_by_name(np, "ch-a") diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 4ad227d04c1a..f241accc053d 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,10 +1,11 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o -obj-y += opal-msglog.o +obj-y += opal-msglog.o opal-hmi.o obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o obj-$(CONFIG_PPC_SCOM) += opal-xscom.o obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o +obj-$(CONFIG_TRACEPOINTS) += opal-tracepoints.o diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 8ad0c5b891f4..c945bed4dc9e 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -187,10 +187,10 @@ static int ioda_eeh_post_init(struct pci_controller *hose) */ static int ioda_eeh_set_option(struct eeh_pe *pe, int option) { - s64 ret; - u32 pe_no; struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; + int enable, ret = 0; + s64 rc; /* Check on PE number */ if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { @@ -201,184 +201,214 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option) return -EINVAL; } - pe_no = pe->addr; switch (option) { case EEH_OPT_DISABLE: - ret = -EEXIST; - break; + return -EPERM; case EEH_OPT_ENABLE: - ret = 0; - break; + return 0; case EEH_OPT_THAW_MMIO: - ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, - OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO); - if (ret) { - pr_warning("%s: Failed to enable MMIO for " - "PHB#%x-PE#%x, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - + enable = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO; break; case EEH_OPT_THAW_DMA: - ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, - OPAL_EEH_ACTION_CLEAR_FREEZE_DMA); - if (ret) { - pr_warning("%s: Failed to enable DMA for " - "PHB#%x-PE#%x, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - + enable = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA; break; default: - pr_warning("%s: Invalid option %d\n", __func__, option); + pr_warn("%s: Invalid option %d\n", + __func__, option); return -EINVAL; } + /* If PHB supports compound PE, to handle it */ + if (phb->unfreeze_pe) { + ret = phb->unfreeze_pe(phb, pe->addr, enable); + } else { + rc = opal_pci_eeh_freeze_clear(phb->opal_id, + pe->addr, + enable); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n", + __func__, rc, option, phb->hose->global_number, + pe->addr); + ret = -EIO; + } + } + return ret; } -static void ioda_eeh_phb_diag(struct pci_controller *hose) +static void ioda_eeh_phb_diag(struct eeh_pe *pe) { - struct pnv_phb *phb = hose->private_data; + struct pnv_phb *phb = pe->phb->private_data; long rc; - rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, + rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data, PNV_PCI_DIAG_BUF_SIZE); - if (rc != OPAL_SUCCESS) { - pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", - __func__, hose->global_number, rc); - return; - } - - pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); + if (rc != OPAL_SUCCESS) + pr_warn("%s: Failed to get diag-data for PHB#%x (%ld)\n", + __func__, pe->phb->global_number, rc); } -/** - * ioda_eeh_get_state - Retrieve the state of PE - * @pe: EEH PE - * - * The PE's state should be retrieved from the PEEV, PEST - * IODA tables. Since the OPAL has exported the function - * to do it, it'd better to use that. - */ -static int ioda_eeh_get_state(struct eeh_pe *pe) +static int ioda_eeh_get_phb_state(struct eeh_pe *pe) { - s64 ret = 0; + struct pnv_phb *phb = pe->phb->private_data; u8 fstate; __be16 pcierr; - u32 pe_no; - int result; - struct pci_controller *hose = pe->phb; - struct pnv_phb *phb = hose->private_data; + s64 rc; + int result = 0; + + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x state\n", + __func__, rc, phb->hose->global_number); + return EEH_STATE_NOT_SUPPORT; + } /* - * Sanity check on PE address. The PHB PE address should - * be zero. + * Check PHB state. If the PHB is frozen for the + * first time, to dump the PHB diag-data. */ - if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { - pr_err("%s: PE address %x out of range [0, %x] " - "on PHB#%x\n", - __func__, pe->addr, phb->ioda.total_pe, - hose->global_number); - return EEH_STATE_NOT_SUPPORT; + if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(pe); } + return result; +} + +static int ioda_eeh_get_pe_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + u8 fstate; + __be16 pcierr; + s64 rc; + int result; + /* - * If we're in middle of PE reset, return normal - * state to keep EEH core going. For PHB reset, we - * still expect to have fenced PHB cleared with - * PHB reset. + * We don't clobber hardware frozen state until PE + * reset is completed. In order to keep EEH core + * moving forward, we have to return operational + * state during PE reset. */ - if (!(pe->type & EEH_PE_PHB) && - (pe->state & EEH_PE_RESET)) { - result = (EEH_STATE_MMIO_ACTIVE | - EEH_STATE_DMA_ACTIVE | + if (pe->state & EEH_PE_RESET) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | EEH_STATE_MMIO_ENABLED | EEH_STATE_DMA_ENABLED); return result; } - /* Retrieve PE status through OPAL */ - pe_no = pe->addr; - ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, - &fstate, &pcierr, NULL); - if (ret) { - pr_err("%s: Failed to get EEH status on " - "PHB#%x-PE#%x\n, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return EEH_STATE_NOT_SUPPORT; - } - - /* Check PHB status */ - if (pe->type & EEH_PE_PHB) { - result = 0; - result &= ~EEH_STATE_RESET_ACTIVE; - - if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; - result |= EEH_STATE_DMA_ENABLED; - } else if (!(pe->state & EEH_PE_ISOLATED)) { - eeh_pe_state_mark(pe, EEH_PE_ISOLATED); - ioda_eeh_phb_diag(hose); + /* + * Fetch PE state from hardware. If the PHB + * supports compound PE, let it handle that. + */ + if (phb->get_pe_state) { + fstate = phb->get_pe_state(phb, pe->addr); + } else { + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n", + __func__, rc, phb->hose->global_number, pe->addr); + return EEH_STATE_NOT_SUPPORT; } - - return result; } - /* Parse result out */ - result = 0; + /* Figure out state */ switch (fstate) { case OPAL_EEH_STOPPED_NOT_FROZEN: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; - result |= EEH_STATE_DMA_ENABLED; + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); break; case OPAL_EEH_STOPPED_MMIO_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_DMA_ENABLED; + result = (EEH_STATE_DMA_ACTIVE | + EEH_STATE_DMA_ENABLED); break; case OPAL_EEH_STOPPED_DMA_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_MMIO_ENABLED); break; case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; + result = 0; break; case OPAL_EEH_STOPPED_RESET: - result |= EEH_STATE_RESET_ACTIVE; + result = EEH_STATE_RESET_ACTIVE; break; case OPAL_EEH_STOPPED_TEMP_UNAVAIL: - result |= EEH_STATE_UNAVAILABLE; + result = EEH_STATE_UNAVAILABLE; break; case OPAL_EEH_STOPPED_PERM_UNAVAIL: - result |= EEH_STATE_NOT_SUPPORT; + result = EEH_STATE_NOT_SUPPORT; break; default: - pr_warning("%s: Unexpected EEH status 0x%x " - "on PHB#%x-PE#%x\n", - __func__, fstate, hose->global_number, pe_no); + result = EEH_STATE_NOT_SUPPORT; + pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n", + __func__, phb->hose->global_number, + pe->addr, fstate); } - /* Dump PHB diag-data for frozen PE */ - if (result != EEH_STATE_NOT_SUPPORT && - (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) != - (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) && + /* + * If PHB supports compound PE, to freeze all + * slave PEs for consistency. + * + * If the PE is switching to frozen state for the + * first time, to dump the PHB diag-data. + */ + if (!(result & EEH_STATE_NOT_SUPPORT) && + !(result & EEH_STATE_UNAVAILABLE) && + !(result & EEH_STATE_MMIO_ACTIVE) && + !(result & EEH_STATE_DMA_ACTIVE) && !(pe->state & EEH_PE_ISOLATED)) { + if (phb->freeze_pe) + phb->freeze_pe(phb, pe->addr); + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); - ioda_eeh_phb_diag(hose); + ioda_eeh_phb_diag(pe); } return result; } +/** + * ioda_eeh_get_state - Retrieve the state of PE + * @pe: EEH PE + * + * The PE's state should be retrieved from the PEEV, PEST + * IODA tables. Since the OPAL has exported the function + * to do it, it'd better to use that. + */ +static int ioda_eeh_get_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + + /* Sanity check on PE number. PHB PE should have 0 */ + if (pe->addr < 0 || + pe->addr >= phb->ioda.total_pe) { + pr_warn("%s: PHB#%x-PE#%x out of range [0, %x]\n", + __func__, phb->hose->global_number, + pe->addr, phb->ioda.total_pe); + return EEH_STATE_NOT_SUPPORT; + } + + if (pe->type & EEH_PE_PHB) + return ioda_eeh_get_phb_state(pe); + + return ioda_eeh_get_pe_state(pe); +} + static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) { s64 rc = OPAL_HARDWARE; @@ -589,6 +619,24 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) } /** + * ioda_eeh_get_log - Retrieve error log + * @pe: frozen PE + * @severity: permanent or temporary error + * @drv_log: device driver log + * @len: length of device driver log + * + * Retrieve error log, which contains log from device driver + * and firmware. + */ +int ioda_eeh_get_log(struct eeh_pe *pe, int severity, + char *drv_log, unsigned long len) +{ + pnv_pci_dump_phb_diag_data(pe->phb, pe->data); + + return 0; +} + +/** * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE * @pe: EEH PE * @@ -605,18 +653,24 @@ static int ioda_eeh_configure_bridge(struct eeh_pe *pe) static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data) { /* GEM */ - pr_info(" GEM XFIR: %016llx\n", data->gemXfir); - pr_info(" GEM RFIR: %016llx\n", data->gemRfir); - pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir); - pr_info(" GEM Mask: %016llx\n", data->gemMask); - pr_info(" GEM RWOF: %016llx\n", data->gemRwof); + if (data->gemXfir || data->gemRfir || + data->gemRirqfir || data->gemMask || data->gemRwof) + pr_info(" GEM: %016llx %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->gemXfir), + be64_to_cpu(data->gemRfir), + be64_to_cpu(data->gemRirqfir), + be64_to_cpu(data->gemMask), + be64_to_cpu(data->gemRwof)); /* LEM */ - pr_info(" LEM FIR: %016llx\n", data->lemFir); - pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask); - pr_info(" LEM Action 0: %016llx\n", data->lemAction0); - pr_info(" LEM Action 1: %016llx\n", data->lemAction1); - pr_info(" LEM WOF: %016llx\n", data->lemWof); + if (data->lemFir || data->lemErrMask || + data->lemAction0 || data->lemAction1 || data->lemWof) + pr_info(" LEM: %016llx %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->lemFir), + be64_to_cpu(data->lemErrMask), + be64_to_cpu(data->lemAction0), + be64_to_cpu(data->lemAction1), + be64_to_cpu(data->lemWof)); } static void ioda_eeh_hub_diag(struct pci_controller *hose) @@ -627,8 +681,8 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data)); if (rc != OPAL_SUCCESS) { - pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n", - __func__, phb->hub_id, rc); + pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n", + __func__, phb->hub_id, rc); return; } @@ -636,24 +690,31 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) case OPAL_P7IOC_DIAG_TYPE_RGC: pr_info("P7IOC diag-data for RGC\n\n"); ioda_eeh_hub_diag_common(data); - pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus); - pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp); + if (data->rgc.rgcStatus || data->rgc.rgcLdcp) + pr_info(" RGC: %016llx %016llx\n", + be64_to_cpu(data->rgc.rgcStatus), + be64_to_cpu(data->rgc.rgcLdcp)); break; case OPAL_P7IOC_DIAG_TYPE_BI: pr_info("P7IOC diag-data for BI %s\n\n", data->bi.biDownbound ? "Downbound" : "Upbound"); ioda_eeh_hub_diag_common(data); - pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0); - pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1); - pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2); - pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus); + if (data->bi.biLdcp0 || data->bi.biLdcp1 || + data->bi.biLdcp2 || data->bi.biFenceStatus) + pr_info(" BI: %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->bi.biLdcp0), + be64_to_cpu(data->bi.biLdcp1), + be64_to_cpu(data->bi.biLdcp2), + be64_to_cpu(data->bi.biFenceStatus)); break; case OPAL_P7IOC_DIAG_TYPE_CI: - pr_info("P7IOC diag-data for CI Port %d\\nn", + pr_info("P7IOC diag-data for CI Port %d\n\n", data->ci.ciPort); ioda_eeh_hub_diag_common(data); - pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus); - pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp); + if (data->ci.ciPortStatus || data->ci.ciPortLdcp) + pr_info(" CI: %016llx %016llx\n", + be64_to_cpu(data->ci.ciPortStatus), + be64_to_cpu(data->ci.ciPortLdcp)); break; case OPAL_P7IOC_DIAG_TYPE_MISC: pr_info("P7IOC diag-data for MISC\n\n"); @@ -664,30 +725,51 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) ioda_eeh_hub_diag_common(data); break; default: - pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n", - __func__, phb->hub_id, data->type); + pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n", + __func__, phb->hub_id, data->type); } } static int ioda_eeh_get_pe(struct pci_controller *hose, u16 pe_no, struct eeh_pe **pe) { - struct eeh_pe *phb_pe, *dev_pe; - struct eeh_dev dev; + struct pnv_phb *phb = hose->private_data; + struct pnv_ioda_pe *pnv_pe; + struct eeh_pe *dev_pe; + struct eeh_dev edev; - /* Find the PHB PE */ - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe) - return -EEXIST; + /* + * If PHB supports compound PE, to fetch + * the master PE because slave PE is invisible + * to EEH core. + */ + if (phb->get_pe_state) { + pnv_pe = &phb->ioda.pe_array[pe_no]; + if (pnv_pe->flags & PNV_IODA_PE_SLAVE) { + pnv_pe = pnv_pe->master; + WARN_ON(!pnv_pe || + !(pnv_pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pnv_pe->pe_number; + } + } /* Find the PE according to PE# */ - memset(&dev, 0, sizeof(struct eeh_dev)); - dev.phb = hose; - dev.pe_config_addr = pe_no; - dev_pe = eeh_pe_get(&dev); - if (!dev_pe) return -EEXIST; + memset(&edev, 0, sizeof(struct eeh_dev)); + edev.phb = hose; + edev.pe_config_addr = pe_no; + dev_pe = eeh_pe_get(&edev); + if (!dev_pe) + return -EEXIST; + /* + * At this point, we're sure the compound PE should + * be put into frozen state. + */ *pe = dev_pe; + if (phb->freeze_pe && + !(dev_pe->state & EEH_PE_ISOLATED)) + phb->freeze_pe(phb, pe_no); + return 0; } @@ -792,7 +874,8 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) "detected, location: %s\n", hose->global_number, eeh_pe_loc_get(phb_pe)); - ioda_eeh_phb_diag(hose); + ioda_eeh_phb_diag(phb_pe); + pnv_pci_dump_phb_diag_data(hose, phb_pe->data); ret = EEH_NEXT_ERR_NONE; } @@ -812,7 +895,8 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) opal_pci_eeh_freeze_clear(phb->opal_id, frozen_pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); ret = EEH_NEXT_ERR_NONE; - } else if ((*pe)->state & EEH_PE_ISOLATED) { + } else if ((*pe)->state & EEH_PE_ISOLATED || + eeh_pe_passed(*pe)) { ret = EEH_NEXT_ERR_NONE; } else { pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", @@ -839,7 +923,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) ret == EEH_NEXT_ERR_FENCED_PHB) && !((*pe)->state & EEH_PE_ISOLATED)) { eeh_pe_state_mark(*pe, EEH_PE_ISOLATED); - ioda_eeh_phb_diag(hose); + ioda_eeh_phb_diag(*pe); } /* @@ -885,6 +969,7 @@ struct pnv_eeh_ops ioda_eeh_ops = { .set_option = ioda_eeh_set_option, .get_state = ioda_eeh_get_state, .reset = ioda_eeh_reset, + .get_log = ioda_eeh_get_log, .configure_bridge = ioda_eeh_configure_bridge, .next_error = ioda_eeh_next_error }; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 56a206f32f77..fd7a16f855ed 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -45,14 +45,31 @@ */ static int powernv_eeh_init(void) { + struct pci_controller *hose; + struct pnv_phb *phb; + /* We require OPALv3 */ if (!firmware_has_feature(FW_FEATURE_OPALv3)) { - pr_warning("%s: OPALv3 is required !\n", __func__); + pr_warn("%s: OPALv3 is required !\n", + __func__); return -EINVAL; } - /* Set EEH probe mode */ - eeh_probe_mode_set(EEH_PROBE_MODE_DEV); + /* Set probe mode */ + eeh_add_flag(EEH_PROBE_MODE_DEV); + + /* + * P7IOC blocks PCI config access to frozen PE, but PHB3 + * doesn't do that. So we have to selectively enable I/O + * prior to collecting error log. + */ + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + + if (phb->model == PNV_PHB_MODEL_P7IOC) + eeh_add_flag(EEH_ENABLE_IO_FOR_LOG); + break; + } return 0; } @@ -107,6 +124,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) struct pnv_phb *phb = hose->private_data; struct device_node *dn = pci_device_to_OF_node(dev); struct eeh_dev *edev = of_node_to_eeh_dev(dn); + int ret; /* * When probing the root bridge, which doesn't have any @@ -143,13 +161,27 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff); /* Create PE */ - eeh_add_to_parent_pe(edev); + ret = eeh_add_to_parent_pe(edev); + if (ret) { + pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n", + __func__, pci_name(dev), ret); + return ret; + } + + /* + * Cache the PE primary bus, which can't be fetched when + * full hotplug is in progress. In that case, all child + * PCI devices of the PE are expected to be removed prior + * to PE reset. + */ + if (!edev->pe->bus) + edev->pe->bus = dev->bus; /* * Enable EEH explicitly so that we will do EEH check * while accessing I/O stuff */ - eeh_set_enable(true); + eeh_add_flag(EEH_ENABLED); /* Save memory bars */ eeh_save_bars(edev); @@ -273,8 +305,8 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait) max_wait -= mwait; if (max_wait <= 0) { - pr_warning("%s: Timeout getting PE#%x's state (%d)\n", - __func__, pe->addr, max_wait); + pr_warn("%s: Timeout getting PE#%x's state (%d)\n", + __func__, pe->addr, max_wait); return EEH_STATE_NOT_SUPPORT; } @@ -294,7 +326,7 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait) * Retrieve the temporary or permanent error from the PE. */ static int powernv_eeh_get_log(struct eeh_pe *pe, int severity, - char *drv_log, unsigned long len) + char *drv_log, unsigned long len) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; @@ -398,9 +430,7 @@ static int __init eeh_powernv_init(void) { int ret = -EINVAL; - if (!machine_is(powernv)) - return ret; - + eeh_set_pe_aux_size(PNV_PCI_DIAG_BUF_SIZE); ret = eeh_ops_register(&powernv_eeh_ops); if (!ret) pr_info("EEH: PowerNV platform initialized\n"); @@ -409,5 +439,4 @@ static int __init eeh_powernv_init(void) return ret; } - -early_initcall(eeh_powernv_init); +machine_early_initcall(powernv, eeh_powernv_init); diff --git a/arch/powerpc/platforms/powernv/opal-async.c b/arch/powerpc/platforms/powernv/opal-async.c index 32e2adfa5320..e462ab947d16 100644 --- a/arch/powerpc/platforms/powernv/opal-async.c +++ b/arch/powerpc/platforms/powernv/opal-async.c @@ -20,6 +20,7 @@ #include <linux/wait.h> #include <linux/gfp.h> #include <linux/of.h> +#include <asm/machdep.h> #include <asm/opal.h> #define N_ASYNC_COMPLETIONS 64 @@ -201,4 +202,4 @@ out_opal_node: out: return err; } -subsys_initcall(opal_async_comp_init); +machine_subsys_initcall(powernv, opal_async_comp_init); diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c new file mode 100644 index 000000000000..97ac8dc33667 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-hmi.c @@ -0,0 +1,188 @@ +/* + * OPAL hypervisor Maintenance interrupt handling support in PowreNV. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; If not, see <http://www.gnu.org/licenses/>. + * + * Copyright 2014 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/mm.h> +#include <linux/slab.h> + +#include <asm/opal.h> +#include <asm/cputable.h> + +static int opal_hmi_handler_nb_init; +struct OpalHmiEvtNode { + struct list_head list; + struct OpalHMIEvent hmi_evt; +}; +static LIST_HEAD(opal_hmi_evt_list); +static DEFINE_SPINLOCK(opal_hmi_evt_lock); + +static void print_hmi_event_info(struct OpalHMIEvent *hmi_evt) +{ + const char *level, *sevstr, *error_info; + static const char *hmi_error_types[] = { + "Malfunction Alert", + "Processor Recovery done", + "Processor recovery occurred again", + "Processor recovery occurred for masked error", + "Timer facility experienced an error", + "TFMR SPR is corrupted", + "UPS (Uniterrupted Power System) Overflow indication", + "An XSCOM operation failure", + "An XSCOM operation completed", + "SCOM has set a reserved FIR bit to cause recovery", + "Debug trigger has set a reserved FIR bit to cause recovery", + "A hypervisor resource error occurred" + }; + + /* Print things out */ + if (hmi_evt->version != OpalHMIEvt_V1) { + pr_err("HMI Interrupt, Unknown event version %d !\n", + hmi_evt->version); + return; + } + switch (hmi_evt->severity) { + case OpalHMI_SEV_NO_ERROR: + level = KERN_INFO; + sevstr = "Harmless"; + break; + case OpalHMI_SEV_WARNING: + level = KERN_WARNING; + sevstr = ""; + break; + case OpalHMI_SEV_ERROR_SYNC: + level = KERN_ERR; + sevstr = "Severe"; + break; + case OpalHMI_SEV_FATAL: + default: + level = KERN_ERR; + sevstr = "Fatal"; + break; + } + + printk("%s%s Hypervisor Maintenance interrupt [%s]\n", + level, sevstr, + hmi_evt->disposition == OpalHMI_DISPOSITION_RECOVERED ? + "Recovered" : "Not recovered"); + error_info = hmi_evt->type < ARRAY_SIZE(hmi_error_types) ? + hmi_error_types[hmi_evt->type] + : "Unknown"; + printk("%s Error detail: %s\n", level, error_info); + printk("%s HMER: %016llx\n", level, be64_to_cpu(hmi_evt->hmer)); + if ((hmi_evt->type == OpalHMI_ERROR_TFAC) || + (hmi_evt->type == OpalHMI_ERROR_TFMR_PARITY)) + printk("%s TFMR: %016llx\n", level, + be64_to_cpu(hmi_evt->tfmr)); +} + +static void hmi_event_handler(struct work_struct *work) +{ + unsigned long flags; + struct OpalHMIEvent *hmi_evt; + struct OpalHmiEvtNode *msg_node; + uint8_t disposition; + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + while (!list_empty(&opal_hmi_evt_list)) { + msg_node = list_entry(opal_hmi_evt_list.next, + struct OpalHmiEvtNode, list); + list_del(&msg_node->list); + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); + + hmi_evt = (struct OpalHMIEvent *) &msg_node->hmi_evt; + print_hmi_event_info(hmi_evt); + disposition = hmi_evt->disposition; + kfree(msg_node); + + /* + * Check if HMI event has been recovered or not. If not + * then we can't continue, invoke panic. + */ + if (disposition != OpalHMI_DISPOSITION_RECOVERED) + panic("Unrecoverable HMI exception"); + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + } + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); +} + +static DECLARE_WORK(hmi_event_work, hmi_event_handler); +/* + * opal_handle_hmi_event - notifier handler that queues up HMI events + * to be preocessed later. + */ +static int opal_handle_hmi_event(struct notifier_block *nb, + unsigned long msg_type, void *msg) +{ + unsigned long flags; + struct OpalHMIEvent *hmi_evt; + struct opal_msg *hmi_msg = msg; + struct OpalHmiEvtNode *msg_node; + + /* Sanity Checks */ + if (msg_type != OPAL_MSG_HMI_EVT) + return 0; + + /* HMI event info starts from param[0] */ + hmi_evt = (struct OpalHMIEvent *)&hmi_msg->params[0]; + + /* Delay the logging of HMI events to workqueue. */ + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (!msg_node) { + pr_err("HMI: out of memory, Opal message event not handled\n"); + return -ENOMEM; + } + memcpy(&msg_node->hmi_evt, hmi_evt, sizeof(struct OpalHMIEvent)); + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + list_add(&msg_node->list, &opal_hmi_evt_list); + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); + + schedule_work(&hmi_event_work); + return 0; +} + +static struct notifier_block opal_hmi_handler_nb = { + .notifier_call = opal_handle_hmi_event, + .next = NULL, + .priority = 0, +}; + +static int __init opal_hmi_handler_init(void) +{ + int ret; + + if (!opal_hmi_handler_nb_init) { + ret = opal_message_notifier_register( + OPAL_MSG_HMI_EVT, &opal_hmi_handler_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + opal_hmi_handler_nb_init = 1; + } + return 0; +} +subsys_initcall(opal_hmi_handler_init); diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index f04b4d8aca5a..ad4b31df779a 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -324,7 +324,7 @@ static int opal_lpc_init_debugfs(void) rc |= opal_lpc_debugfs_create_type(root, "fw", OPAL_LPC_FW); return rc; } -device_initcall(opal_lpc_init_debugfs); +machine_device_initcall(powernv, opal_lpc_init_debugfs); #endif /* CONFIG_DEBUG_FS */ void opal_lpc_init(void) diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c index b17a34b695ef..43db2136dbff 100644 --- a/arch/powerpc/platforms/powernv/opal-memory-errors.c +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -27,6 +27,7 @@ #include <linux/mm.h> #include <linux/slab.h> +#include <asm/machdep.h> #include <asm/opal.h> #include <asm/cputable.h> @@ -143,4 +144,4 @@ static int __init opal_mem_err_init(void) } return 0; } -subsys_initcall(opal_mem_err_init); +machine_subsys_initcall(powernv, opal_mem_err_init); diff --git a/arch/powerpc/platforms/powernv/opal-tracepoints.c b/arch/powerpc/platforms/powernv/opal-tracepoints.c new file mode 100644 index 000000000000..d8a000a9988b --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-tracepoints.c @@ -0,0 +1,84 @@ +#include <linux/percpu.h> +#include <linux/jump_label.h> +#include <asm/trace.h> + +#ifdef CONFIG_JUMP_LABEL +struct static_key opal_tracepoint_key = STATIC_KEY_INIT; + +void opal_tracepoint_regfunc(void) +{ + static_key_slow_inc(&opal_tracepoint_key); +} + +void opal_tracepoint_unregfunc(void) +{ + static_key_slow_dec(&opal_tracepoint_key); +} +#else +/* + * We optimise OPAL calls by placing opal_tracepoint_refcount + * directly in the TOC so we can check if the opal tracepoints are + * enabled via a single load. + */ + +/* NB: reg/unreg are called while guarded with the tracepoints_mutex */ +extern long opal_tracepoint_refcount; + +void opal_tracepoint_regfunc(void) +{ + opal_tracepoint_refcount++; +} + +void opal_tracepoint_unregfunc(void) +{ + opal_tracepoint_refcount--; +} +#endif + +/* + * Since the tracing code might execute OPAL calls we need to guard against + * recursion. + */ +static DEFINE_PER_CPU(unsigned int, opal_trace_depth); + +void __trace_opal_entry(unsigned long opcode, unsigned long *args) +{ + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(opal_trace_depth); + + if (*depth) + goto out; + + (*depth)++; + preempt_disable(); + trace_opal_entry(opcode, args); + (*depth)--; + +out: + local_irq_restore(flags); +} + +void __trace_opal_exit(long opcode, unsigned long retval) +{ + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(opal_trace_depth); + + if (*depth) + goto out; + + (*depth)++; + trace_opal_exit(opcode, retval); + preempt_enable(); + (*depth)--; + +out: + local_irq_restore(flags); +} diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 4abbff22a61f..a328be44880f 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -13,30 +13,69 @@ #include <asm/hvcall.h> #include <asm/asm-offsets.h> #include <asm/opal.h> +#include <asm/jump_label.h> + + .section ".text" + +#ifdef CONFIG_TRACEPOINTS +#ifdef CONFIG_JUMP_LABEL +#define OPAL_BRANCH(LABEL) \ + ARCH_STATIC_BRANCH(LABEL, opal_tracepoint_key) +#else + + .section ".toc","aw" + + .globl opal_tracepoint_refcount +opal_tracepoint_refcount: + .llong 0 + + .section ".text" + +/* + * We branch around this in early init by using an unconditional cpu + * feature. + */ +#define OPAL_BRANCH(LABEL) \ +BEGIN_FTR_SECTION; \ + b 1f; \ +END_FTR_SECTION(0, 1); \ + ld r12,opal_tracepoint_refcount@toc(r2); \ + std r12,32(r1); \ + cmpdi r12,0; \ + bne- LABEL; \ +1: + +#endif + +#else +#define OPAL_BRANCH(LABEL) +#endif /* TODO: * * - Trace irqs in/off (needs saving/restoring all args, argh...) * - Get r11 feed up by Dave so I can have better register usage */ + #define OPAL_CALL(name, token) \ _GLOBAL(name); \ mflr r0; \ - mfcr r12; \ std r0,16(r1); \ + li r0,token; \ + OPAL_BRANCH(opal_tracepoint_entry) \ + mfcr r12; \ stw r12,8(r1); \ std r1,PACAR1(r13); \ - li r0,0; \ + li r11,0; \ mfmsr r12; \ - ori r0,r0,MSR_EE; \ + ori r11,r11,MSR_EE; \ std r12,PACASAVEDMSR(r13); \ - andc r12,r12,r0; \ + andc r12,r12,r11; \ mtmsrd r12,1; \ - LOAD_REG_ADDR(r0,opal_return); \ - mtlr r0; \ - li r0,MSR_DR|MSR_IR|MSR_LE;\ - andc r12,r12,r0; \ - li r0,token; \ + LOAD_REG_ADDR(r11,opal_return); \ + mtlr r11; \ + li r11,MSR_DR|MSR_IR|MSR_LE;\ + andc r12,r12,r11; \ mtspr SPRN_HSRR1,r12; \ LOAD_REG_ADDR(r11,opal); \ ld r12,8(r11); \ @@ -61,6 +100,64 @@ opal_return: mtcr r4; rfid +#ifdef CONFIG_TRACEPOINTS +opal_tracepoint_entry: + stdu r1,-STACKFRAMESIZE(r1) + std r0,STK_REG(R23)(r1) + std r3,STK_REG(R24)(r1) + std r4,STK_REG(R25)(r1) + std r5,STK_REG(R26)(r1) + std r6,STK_REG(R27)(r1) + std r7,STK_REG(R28)(r1) + std r8,STK_REG(R29)(r1) + std r9,STK_REG(R30)(r1) + std r10,STK_REG(R31)(r1) + mr r3,r0 + addi r4,r1,STK_REG(R24) + bl __trace_opal_entry + ld r0,STK_REG(R23)(r1) + ld r3,STK_REG(R24)(r1) + ld r4,STK_REG(R25)(r1) + ld r5,STK_REG(R26)(r1) + ld r6,STK_REG(R27)(r1) + ld r7,STK_REG(R28)(r1) + ld r8,STK_REG(R29)(r1) + ld r9,STK_REG(R30)(r1) + ld r10,STK_REG(R31)(r1) + LOAD_REG_ADDR(r11,opal_tracepoint_return) + mfcr r12 + std r11,16(r1) + stw r12,8(r1) + std r1,PACAR1(r13) + li r11,0 + mfmsr r12 + ori r11,r11,MSR_EE + std r12,PACASAVEDMSR(r13) + andc r12,r12,r11 + mtmsrd r12,1 + LOAD_REG_ADDR(r11,opal_return) + mtlr r11 + li r11,MSR_DR|MSR_IR|MSR_LE + andc r12,r12,r11 + mtspr SPRN_HSRR1,r12 + LOAD_REG_ADDR(r11,opal) + ld r12,8(r11) + ld r2,0(r11) + mtspr SPRN_HSRR0,r12 + hrfid + +opal_tracepoint_return: + std r3,STK_REG(R31)(r1) + mr r4,r3 + ld r0,STK_REG(R23)(r1) + bl __trace_opal_exit + ld r3,STK_REG(R31)(r1) + addi r1,r1,STACKFRAMESIZE + ld r0,16(r1) + mtlr r0 + blr +#endif + OPAL_CALL(opal_invalid_call, OPAL_INVALID_CALL); OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE); OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ); @@ -86,6 +183,7 @@ OPAL_CALL(opal_get_xive, OPAL_GET_XIVE); OPAL_CALL(opal_register_exception_handler, OPAL_REGISTER_OPAL_EXCEPTION_HANDLER); OPAL_CALL(opal_pci_eeh_freeze_status, OPAL_PCI_EEH_FREEZE_STATUS); OPAL_CALL(opal_pci_eeh_freeze_clear, OPAL_PCI_EEH_FREEZE_CLEAR); +OPAL_CALL(opal_pci_eeh_freeze_set, OPAL_PCI_EEH_FREEZE_SET); OPAL_CALL(opal_pci_shpc, OPAL_PCI_SHPC); OPAL_CALL(opal_pci_phb_mmio_enable, OPAL_PCI_PHB_MMIO_ENABLE); OPAL_CALL(opal_pci_set_phb_mem_window, OPAL_PCI_SET_PHB_MEM_WINDOW); @@ -146,3 +244,4 @@ OPAL_CALL(opal_sync_host_reboot, OPAL_SYNC_HOST_REBOOT); OPAL_CALL(opal_sensor_read, OPAL_SENSOR_READ); OPAL_CALL(opal_get_param, OPAL_GET_PARAM); OPAL_CALL(opal_set_param, OPAL_SET_PARAM); +OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI); diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 4cd2ea6c0dbe..7634d1c62299 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -130,4 +130,4 @@ static int opal_xscom_init(void) scom_init(&opal_scom_controller); return 0; } -arch_initcall(opal_xscom_init); +machine_arch_initcall(powernv, opal_xscom_init); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 199975613fe9..f0a01a46a57d 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -22,6 +22,8 @@ #include <linux/kobject.h> #include <linux/delay.h> #include <linux/memblock.h> + +#include <asm/machdep.h> #include <asm/opal.h> #include <asm/firmware.h> #include <asm/mce.h> @@ -192,16 +194,12 @@ static int __init opal_register_exception_handlers(void) * fwnmi area at 0x7000 to provide the glue space to OPAL */ glue = 0x7000; - opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER, - 0, glue); - glue += 128; opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); #endif return 0; } - -early_initcall(opal_register_exception_handlers); +machine_early_initcall(powernv, opal_register_exception_handlers); int opal_notifier_register(struct notifier_block *nb) { @@ -368,7 +366,7 @@ static int __init opal_message_init(void) } return 0; } -early_initcall(opal_message_init); +machine_early_initcall(powernv, opal_message_init); int opal_get_chars(uint32_t vtermno, char *buf, int count) { @@ -513,6 +511,46 @@ int opal_machine_check(struct pt_regs *regs) return 0; } +/* Early hmi handler called in real mode. */ +int opal_hmi_exception_early(struct pt_regs *regs) +{ + s64 rc; + + /* + * call opal hmi handler. Pass paca address as token. + * The return value OPAL_SUCCESS is an indication that there is + * an HMI event generated waiting to pull by Linux. + */ + rc = opal_handle_hmi(); + if (rc == OPAL_SUCCESS) { + local_paca->hmi_event_available = 1; + return 1; + } + return 0; +} + +/* HMI exception handler called in virtual mode during check_irq_replay. */ +int opal_handle_hmi_exception(struct pt_regs *regs) +{ + s64 rc; + __be64 evt = 0; + + /* + * Check if HMI event is available. + * if Yes, then call opal_poll_events to pull opal messages and + * process them. + */ + if (!local_paca->hmi_event_available) + return 0; + + local_paca->hmi_event_available = 0; + rc = opal_poll_events(&evt); + if (rc == OPAL_SUCCESS && evt) + opal_do_notifier(be64_to_cpu(evt)); + + return 1; +} + static uint64_t find_recovery_address(uint64_t nip) { int i; @@ -630,7 +668,7 @@ static int __init opal_init(void) return 0; } -subsys_initcall(opal_init); +machine_subsys_initcall(powernv, opal_init); void opal_shutdown(void) { diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index de19edeaa7a7..b136108ddc99 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -36,6 +36,7 @@ #include <asm/tce.h> #include <asm/xics.h> #include <asm/debug.h> +#include <asm/firmware.h> #include "powernv.h" #include "pci.h" @@ -82,6 +83,12 @@ static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr) : : "r" (val), "r" (paddr) : "memory"); } +static inline bool pnv_pci_is_mem_pref_64(unsigned long flags) +{ + return ((flags & (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)) == + (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)); +} + static int pnv_ioda_alloc_pe(struct pnv_phb *phb) { unsigned long pe; @@ -106,6 +113,380 @@ static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe) clear_bit(pe, phb->ioda.pe_alloc); } +/* The default M64 BAR is shared by all PEs */ +static int pnv_ioda2_init_m64(struct pnv_phb *phb) +{ + const char *desc; + struct resource *r; + s64 rc; + + /* Configure the default M64 BAR */ + rc = opal_pci_set_phb_mem_window(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + phb->ioda.m64_base, + 0, /* unused */ + phb->ioda.m64_size); + if (rc != OPAL_SUCCESS) { + desc = "configuring"; + goto fail; + } + + /* Enable the default M64 BAR */ + rc = opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_ENABLE_M64_SPLIT); + if (rc != OPAL_SUCCESS) { + desc = "enabling"; + goto fail; + } + + /* Mark the M64 BAR assigned */ + set_bit(phb->ioda.m64_bar_idx, &phb->ioda.m64_bar_alloc); + + /* + * Strip off the segment used by the reserved PE, which is + * expected to be 0 or last one of PE capabicity. + */ + r = &phb->hose->mem_resources[1]; + if (phb->ioda.reserved_pe == 0) + r->start += phb->ioda.m64_segsize; + else if (phb->ioda.reserved_pe == (phb->ioda.total_pe - 1)) + r->end -= phb->ioda.m64_segsize; + else + pr_warn(" Cannot strip M64 segment for reserved PE#%d\n", + phb->ioda.reserved_pe); + + return 0; + +fail: + pr_warn(" Failure %lld %s M64 BAR#%d\n", + rc, desc, phb->ioda.m64_bar_idx); + opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_DISABLE_M64); + return -EIO; +} + +static void pnv_ioda2_alloc_m64_pe(struct pnv_phb *phb) +{ + resource_size_t sgsz = phb->ioda.m64_segsize; + struct pci_dev *pdev; + struct resource *r; + int base, step, i; + + /* + * Root bus always has full M64 range and root port has + * M64 range used in reality. So we're checking root port + * instead of root bus. + */ + list_for_each_entry(pdev, &phb->hose->bus->devices, bus_list) { + for (i = PCI_BRIDGE_RESOURCES; + i <= PCI_BRIDGE_RESOURCE_END; i++) { + r = &pdev->resource[i]; + if (!r->parent || + !pnv_pci_is_mem_pref_64(r->flags)) + continue; + + base = (r->start - phb->ioda.m64_base) / sgsz; + for (step = 0; step < resource_size(r) / sgsz; step++) + set_bit(base + step, phb->ioda.pe_alloc); + } + } +} + +static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb, + struct pci_bus *bus, int all) +{ + resource_size_t segsz = phb->ioda.m64_segsize; + struct pci_dev *pdev; + struct resource *r; + struct pnv_ioda_pe *master_pe, *pe; + unsigned long size, *pe_alloc; + bool found; + int start, i, j; + + /* Root bus shouldn't use M64 */ + if (pci_is_root_bus(bus)) + return IODA_INVALID_PE; + + /* We support only one M64 window on each bus */ + found = false; + pci_bus_for_each_resource(bus, r, i) { + if (r && r->parent && + pnv_pci_is_mem_pref_64(r->flags)) { + found = true; + break; + } + } + + /* No M64 window found ? */ + if (!found) + return IODA_INVALID_PE; + + /* Allocate bitmap */ + size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); + pe_alloc = kzalloc(size, GFP_KERNEL); + if (!pe_alloc) { + pr_warn("%s: Out of memory !\n", + __func__); + return IODA_INVALID_PE; + } + + /* + * Figure out reserved PE numbers by the PE + * the its child PEs. + */ + start = (r->start - phb->ioda.m64_base) / segsz; + for (i = 0; i < resource_size(r) / segsz; i++) + set_bit(start + i, pe_alloc); + + if (all) + goto done; + + /* + * If the PE doesn't cover all subordinate buses, + * we need subtract from reserved PEs for children. + */ + list_for_each_entry(pdev, &bus->devices, bus_list) { + if (!pdev->subordinate) + continue; + + pci_bus_for_each_resource(pdev->subordinate, r, i) { + if (!r || !r->parent || + !pnv_pci_is_mem_pref_64(r->flags)) + continue; + + start = (r->start - phb->ioda.m64_base) / segsz; + for (j = 0; j < resource_size(r) / segsz ; j++) + clear_bit(start + j, pe_alloc); + } + } + + /* + * the current bus might not own M64 window and that's all + * contributed by its child buses. For the case, we needn't + * pick M64 dependent PE#. + */ + if (bitmap_empty(pe_alloc, phb->ioda.total_pe)) { + kfree(pe_alloc); + return IODA_INVALID_PE; + } + + /* + * Figure out the master PE and put all slave PEs to master + * PE's list to form compound PE. + */ +done: + master_pe = NULL; + i = -1; + while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe, i + 1)) < + phb->ioda.total_pe) { + pe = &phb->ioda.pe_array[i]; + pe->phb = phb; + pe->pe_number = i; + + if (!master_pe) { + pe->flags |= PNV_IODA_PE_MASTER; + INIT_LIST_HEAD(&pe->slaves); + master_pe = pe; + } else { + pe->flags |= PNV_IODA_PE_SLAVE; + pe->master = master_pe; + list_add_tail(&pe->list, &master_pe->slaves); + } + } + + kfree(pe_alloc); + return master_pe->pe_number; +} + +static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) +{ + struct pci_controller *hose = phb->hose; + struct device_node *dn = hose->dn; + struct resource *res; + const u32 *r; + u64 pci_addr; + + if (!firmware_has_feature(FW_FEATURE_OPALv3)) { + pr_info(" Firmware too old to support M64 window\n"); + return; + } + + r = of_get_property(dn, "ibm,opal-m64-window", NULL); + if (!r) { + pr_info(" No <ibm,opal-m64-window> on %s\n", + dn->full_name); + return; + } + + /* FIXME: Support M64 for P7IOC */ + if (phb->type != PNV_PHB_IODA2) { + pr_info(" Not support M64 window\n"); + return; + } + + res = &hose->mem_resources[1]; + res->start = of_translate_address(dn, r + 2); + res->end = res->start + of_read_number(r + 4, 2) - 1; + res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH); + pci_addr = of_read_number(r, 2); + hose->mem_offset[1] = res->start - pci_addr; + + phb->ioda.m64_size = resource_size(res); + phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe; + phb->ioda.m64_base = pci_addr; + + /* Use last M64 BAR to cover M64 window */ + phb->ioda.m64_bar_idx = 15; + phb->init_m64 = pnv_ioda2_init_m64; + phb->alloc_m64_pe = pnv_ioda2_alloc_m64_pe; + phb->pick_m64_pe = pnv_ioda2_pick_m64_pe; +} + +static void pnv_ioda_freeze_pe(struct pnv_phb *phb, int pe_no) +{ + struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_no]; + struct pnv_ioda_pe *slave; + s64 rc; + + /* Fetch master PE */ + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pe->pe_number; + } + + /* Freeze master PE */ + rc = opal_pci_eeh_freeze_set(phb->opal_id, + pe_no, + OPAL_EEH_ACTION_SET_FREEZE_ALL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, pe_no); + return; + } + + /* Freeze slave PEs */ + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return; + + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_set(phb->opal_id, + slave->pe_number, + OPAL_EEH_ACTION_SET_FREEZE_ALL); + if (rc != OPAL_SUCCESS) + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + slave->pe_number); + } +} + +int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt) +{ + struct pnv_ioda_pe *pe, *slave; + s64 rc; + + /* Find master PE */ + pe = &phb->ioda.pe_array[pe_no]; + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pe->pe_number; + } + + /* Clear frozen state for master PE */ + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", + __func__, rc, opt, phb->hose->global_number, pe_no); + return -EIO; + } + + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return 0; + + /* Clear frozen state for slave PEs */ + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_clear(phb->opal_id, + slave->pe_number, + opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", + __func__, rc, opt, phb->hose->global_number, + slave->pe_number); + return -EIO; + } + } + + return 0; +} + +static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no) +{ + struct pnv_ioda_pe *slave, *pe; + u8 fstate, state; + __be16 pcierr; + s64 rc; + + /* Sanity check on PE number */ + if (pe_no < 0 || pe_no >= phb->ioda.total_pe) + return OPAL_EEH_STOPPED_PERM_UNAVAIL; + + /* + * Fetch the master PE and the PE instance might be + * not initialized yet. + */ + pe = &phb->ioda.pe_array[pe_no]; + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pe->pe_number; + } + + /* Check the master PE */ + rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, + &state, &pcierr, NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting " + "PHB#%x-PE#%x state\n", + __func__, rc, + phb->hose->global_number, pe_no); + return OPAL_EEH_STOPPED_TEMP_UNAVAIL; + } + + /* Check the slave PE */ + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return state; + + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_status(phb->opal_id, + slave->pe_number, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting " + "PHB#%x-PE#%x state\n", + __func__, rc, + phb->hose->global_number, slave->pe_number); + return OPAL_EEH_STOPPED_TEMP_UNAVAIL; + } + + /* + * Override the result based on the ascending + * priority. + */ + if (fstate > state) + state = fstate; + } + + return state; +} + /* Currently those 2 are only used when MSIs are enabled, this will change * but in the meantime, we need to protect them to avoid warnings */ @@ -363,9 +744,16 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all) struct pci_controller *hose = pci_bus_to_host(bus); struct pnv_phb *phb = hose->private_data; struct pnv_ioda_pe *pe; - int pe_num; + int pe_num = IODA_INVALID_PE; + + /* Check if PE is determined by M64 */ + if (phb->pick_m64_pe) + pe_num = phb->pick_m64_pe(phb, bus, all); + + /* The PE number isn't pinned by M64 */ + if (pe_num == IODA_INVALID_PE) + pe_num = pnv_ioda_alloc_pe(phb); - pe_num = pnv_ioda_alloc_pe(phb); if (pe_num == IODA_INVALID_PE) { pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n", __func__, pci_domain_nr(bus), bus->number); @@ -373,7 +761,7 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all) } pe = &phb->ioda.pe_array[pe_num]; - pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); + pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); pe->pbus = bus; pe->pdev = NULL; pe->tce32_seg = -1; @@ -441,8 +829,15 @@ static void pnv_ioda_setup_PEs(struct pci_bus *bus) static void pnv_pci_ioda_setup_PEs(void) { struct pci_controller *hose, *tmp; + struct pnv_phb *phb; list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + phb = hose->private_data; + + /* M64 layout might affect PE allocation */ + if (phb->alloc_m64_pe) + phb->alloc_m64_pe(phb); + pnv_ioda_setup_PEs(hose->bus); } } @@ -491,17 +886,26 @@ static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb, set_dma_ops(&pdev->dev, &dma_iommu_ops); set_iommu_table_base(&pdev->dev, &pe->tce32_table); } + *pdev->dev.dma_mask = dma_mask; return 0; } -static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) +static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, + struct pci_bus *bus, + bool add_to_iommu_group) { struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - set_iommu_table_base_and_group(&dev->dev, &pe->tce32_table); + if (add_to_iommu_group) + set_iommu_table_base_and_group(&dev->dev, + &pe->tce32_table); + else + set_iommu_table_base(&dev->dev, &pe->tce32_table); + if (dev->subordinate) - pnv_ioda_setup_bus_dma(pe, dev->subordinate); + pnv_ioda_setup_bus_dma(pe, dev->subordinate, + add_to_iommu_group); } } @@ -513,15 +917,16 @@ static void pnv_pci_ioda1_tce_invalidate(struct pnv_ioda_pe *pe, (__be64 __iomem *)pe->tce_inval_reg_phys : (__be64 __iomem *)tbl->it_index; unsigned long start, end, inc; + const unsigned shift = tbl->it_page_shift; start = __pa(startp); end = __pa(endp); /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */ if (tbl->it_busno) { - start <<= 12; - end <<= 12; - inc = 128 << 12; + start <<= shift; + end <<= shift; + inc = 128ull << shift; start |= tbl->it_busno; end |= tbl->it_busno; } else if (tbl->it_type & TCE_PCI_SWINV_PAIR) { @@ -559,18 +964,19 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe, __be64 __iomem *invalidate = rm ? (__be64 __iomem *)pe->tce_inval_reg_phys : (__be64 __iomem *)tbl->it_index; + const unsigned shift = tbl->it_page_shift; /* We'll invalidate DMA address in PE scope */ - start = 0x2ul << 60; + start = 0x2ull << 60; start |= (pe->pe_number & 0xFF); end = start; /* Figure out the start, end and step */ inc = tbl->it_offset + (((u64)startp - tbl->it_base) / sizeof(u64)); - start |= (inc << 12); + start |= (inc << shift); inc = tbl->it_offset + (((u64)endp - tbl->it_base) / sizeof(u64)); - end |= (inc << 12); - inc = (0x1ul << 12); + end |= (inc << shift); + inc = (0x1ull << shift); mb(); while (start <= end) { @@ -654,7 +1060,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, /* Setup linux iommu table */ tbl = &pe->tce32_table; pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs, - base << 28); + base << 28, IOMMU_PAGE_SHIFT_4K); /* OPAL variant of P7IOC SW invalidated TCEs */ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL); @@ -677,7 +1083,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, if (pe->pdev) set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else - pnv_ioda_setup_bus_dma(pe, pe->pbus); + pnv_ioda_setup_bus_dma(pe, pe->pbus, true); return; fail: @@ -713,11 +1119,15 @@ static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable) 0); /* - * We might want to reset the DMA ops of all devices on - * this PE. However in theory, that shouldn't be necessary - * as this is used for VFIO/KVM pass-through and the device - * hasn't yet been returned to its kernel driver + * EEH needs the mapping between IOMMU table and group + * of those VFIO/KVM pass-through devices. We can postpone + * resetting DMA ops until the DMA mask is configured in + * host side. */ + if (pe->pdev) + set_iommu_table_base(&pe->pdev->dev, tbl); + else + pnv_ioda_setup_bus_dma(pe, pe->pbus, false); } if (rc) pe_err(pe, "OPAL error %lld configuring bypass window\n", rc); @@ -784,7 +1194,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, /* Setup linux iommu table */ tbl = &pe->tce32_table; - pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0); + pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0, + IOMMU_PAGE_SHIFT_4K); /* OPAL variant of PHB3 invalidated TCEs */ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL); @@ -805,7 +1216,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, if (pe->pdev) set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else - pnv_ioda_setup_bus_dma(pe, pe->pbus); + pnv_ioda_setup_bus_dma(pe, pe->pbus, true); /* Also create a bypass window */ pnv_pci_ioda2_setup_bypass_pe(phb, pe); @@ -1055,9 +1466,6 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose, index++; } } else if (res->flags & IORESOURCE_MEM) { - /* WARNING: Assumes M32 is mem region 0 in PHB. We need to - * harden that algorithm when we start supporting M64 - */ region.start = res->start - hose->mem_offset[0] - phb->ioda.m32_pci_base; @@ -1141,9 +1549,8 @@ static void pnv_pci_ioda_fixup(void) pnv_pci_ioda_create_dbgfs(); #ifdef CONFIG_EEH - eeh_probe_mode_set(EEH_PROBE_MODE_DEV); - eeh_addr_cache_build(); eeh_init(); + eeh_addr_cache_build(); #endif } @@ -1178,7 +1585,10 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus, bridge = bridge->bus->self; } - /* We need support prefetchable memory window later */ + /* We fail back to M32 if M64 isn't supported */ + if (phb->ioda.m64_segsize && + pnv_pci_is_mem_pref_64(type)) + return phb->ioda.m64_segsize; if (type & IORESOURCE_MEM) return phb->ioda.m32_segsize; @@ -1299,6 +1709,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL); if (prop32) phb->ioda.reserved_pe = be32_to_cpup(prop32); + + /* Parse 64-bit MMIO range */ + pnv_ioda_parse_m64_window(phb); + phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); /* FW Has already off top 64k of M32 space (MSI space) */ phb->ioda.m32_size += 0x10000; @@ -1334,14 +1748,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, /* Calculate how many 32-bit TCE segments we have */ phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; - /* Clear unusable m64 */ - hose->mem_resources[1].flags = 0; - hose->mem_resources[1].start = 0; - hose->mem_resources[1].end = 0; - hose->mem_resources[2].flags = 0; - hose->mem_resources[2].start = 0; - hose->mem_resources[2].end = 0; - #if 0 /* We should really do that ... */ rc = opal_pci_set_phb_mem_window(opal->phb_id, window_type, @@ -1351,14 +1757,21 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, segment_size); #endif - pr_info(" %d (%d) PE's M32: 0x%x [segment=0x%x]" - " IO: 0x%x [segment=0x%x]\n", - phb->ioda.total_pe, - phb->ioda.reserved_pe, - phb->ioda.m32_size, phb->ioda.m32_segsize, - phb->ioda.io_size, phb->ioda.io_segsize); + pr_info(" %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n", + phb->ioda.total_pe, phb->ioda.reserved_pe, + phb->ioda.m32_size, phb->ioda.m32_segsize); + if (phb->ioda.m64_size) + pr_info(" M64: 0x%lx [segment=0x%lx]\n", + phb->ioda.m64_size, phb->ioda.m64_segsize); + if (phb->ioda.io_size) + pr_info(" IO: 0x%x [segment=0x%x]\n", + phb->ioda.io_size, phb->ioda.io_segsize); + phb->hose->ops = &pnv_pci_ops; + phb->get_pe_state = pnv_ioda_get_pe_state; + phb->freeze_pe = pnv_ioda_freeze_pe; + phb->unfreeze_pe = pnv_ioda_unfreeze_pe; #ifdef CONFIG_EEH phb->eeh_ops = &ioda_eeh_ops; #endif @@ -1404,6 +1817,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET); } + + /* Configure M64 window */ + if (phb->init_m64 && phb->init_m64(phb)) + hose->mem_resources[1].flags = 0; } void __init pnv_pci_init_ioda2_phb(struct device_node *np) diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c index e3807d69393e..94ce3481490b 100644 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c @@ -172,7 +172,8 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup; pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table, - tce_mem, tce_size, 0); + tce_mem, tce_size, 0, + IOMMU_PAGE_SHIFT_4K); } void __init pnv_pci_init_p5ioc2_hub(struct device_node *np) diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index f91a4e5d872e..b854b57ed5e1 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -132,61 +132,78 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, data = (struct OpalIoP7IOCPhbErrorData *)common; pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n", - hose->global_number, common->version); + hose->global_number, be32_to_cpu(common->version)); if (data->brdgCtl) pr_info("brdgCtl: %08x\n", - data->brdgCtl); + be32_to_cpu(data->brdgCtl)); if (data->portStatusReg || data->rootCmplxStatus || data->busAgentStatus) pr_info("UtlSts: %08x %08x %08x\n", - data->portStatusReg, data->rootCmplxStatus, - data->busAgentStatus); + be32_to_cpu(data->portStatusReg), + be32_to_cpu(data->rootCmplxStatus), + be32_to_cpu(data->busAgentStatus)); if (data->deviceStatus || data->slotStatus || data->linkStatus || data->devCmdStatus || data->devSecStatus) pr_info("RootSts: %08x %08x %08x %08x %08x\n", - data->deviceStatus, data->slotStatus, - data->linkStatus, data->devCmdStatus, - data->devSecStatus); + be32_to_cpu(data->deviceStatus), + be32_to_cpu(data->slotStatus), + be32_to_cpu(data->linkStatus), + be32_to_cpu(data->devCmdStatus), + be32_to_cpu(data->devSecStatus)); if (data->rootErrorStatus || data->uncorrErrorStatus || data->corrErrorStatus) pr_info("RootErrSts: %08x %08x %08x\n", - data->rootErrorStatus, data->uncorrErrorStatus, - data->corrErrorStatus); + be32_to_cpu(data->rootErrorStatus), + be32_to_cpu(data->uncorrErrorStatus), + be32_to_cpu(data->corrErrorStatus)); if (data->tlpHdr1 || data->tlpHdr2 || data->tlpHdr3 || data->tlpHdr4) pr_info("RootErrLog: %08x %08x %08x %08x\n", - data->tlpHdr1, data->tlpHdr2, - data->tlpHdr3, data->tlpHdr4); + be32_to_cpu(data->tlpHdr1), + be32_to_cpu(data->tlpHdr2), + be32_to_cpu(data->tlpHdr3), + be32_to_cpu(data->tlpHdr4)); if (data->sourceId || data->errorClass || data->correlator) pr_info("RootErrLog1: %08x %016llx %016llx\n", - data->sourceId, data->errorClass, - data->correlator); + be32_to_cpu(data->sourceId), + be64_to_cpu(data->errorClass), + be64_to_cpu(data->correlator)); if (data->p7iocPlssr || data->p7iocCsr) pr_info("PhbSts: %016llx %016llx\n", - data->p7iocPlssr, data->p7iocCsr); + be64_to_cpu(data->p7iocPlssr), + be64_to_cpu(data->p7iocCsr)); if (data->lemFir) pr_info("Lem: %016llx %016llx %016llx\n", - data->lemFir, data->lemErrorMask, - data->lemWOF); + be64_to_cpu(data->lemFir), + be64_to_cpu(data->lemErrorMask), + be64_to_cpu(data->lemWOF)); if (data->phbErrorStatus) pr_info("PhbErr: %016llx %016llx %016llx %016llx\n", - data->phbErrorStatus, data->phbFirstErrorStatus, - data->phbErrorLog0, data->phbErrorLog1); + be64_to_cpu(data->phbErrorStatus), + be64_to_cpu(data->phbFirstErrorStatus), + be64_to_cpu(data->phbErrorLog0), + be64_to_cpu(data->phbErrorLog1)); if (data->mmioErrorStatus) pr_info("OutErr: %016llx %016llx %016llx %016llx\n", - data->mmioErrorStatus, data->mmioFirstErrorStatus, - data->mmioErrorLog0, data->mmioErrorLog1); + be64_to_cpu(data->mmioErrorStatus), + be64_to_cpu(data->mmioFirstErrorStatus), + be64_to_cpu(data->mmioErrorLog0), + be64_to_cpu(data->mmioErrorLog1)); if (data->dma0ErrorStatus) pr_info("InAErr: %016llx %016llx %016llx %016llx\n", - data->dma0ErrorStatus, data->dma0FirstErrorStatus, - data->dma0ErrorLog0, data->dma0ErrorLog1); + be64_to_cpu(data->dma0ErrorStatus), + be64_to_cpu(data->dma0FirstErrorStatus), + be64_to_cpu(data->dma0ErrorLog0), + be64_to_cpu(data->dma0ErrorLog1)); if (data->dma1ErrorStatus) pr_info("InBErr: %016llx %016llx %016llx %016llx\n", - data->dma1ErrorStatus, data->dma1FirstErrorStatus, - data->dma1ErrorLog0, data->dma1ErrorLog1); + be64_to_cpu(data->dma1ErrorStatus), + be64_to_cpu(data->dma1FirstErrorStatus), + be64_to_cpu(data->dma1ErrorLog0), + be64_to_cpu(data->dma1ErrorLog1)); for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { if ((data->pestA[i] >> 63) == 0 && @@ -194,7 +211,8 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, continue; pr_info("PE[%3d] A/B: %016llx %016llx\n", - i, data->pestA[i], data->pestB[i]); + i, be64_to_cpu(data->pestA[i]), + be64_to_cpu(data->pestB[i])); } } @@ -319,43 +337,52 @@ void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) { unsigned long flags, rc; - int has_diag; + int has_diag, ret = 0; spin_lock_irqsave(&phb->lock, flags); + /* Fetch PHB diag-data */ rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); has_diag = (rc == OPAL_SUCCESS); - rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + /* If PHB supports compound PE, to handle it */ + if (phb->unfreeze_pe) { + ret = phb->unfreeze_pe(phb, + pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); - if (rc) { - pr_warning("PCI %d: Failed to clear EEH freeze state" - " for PE#%d, err %ld\n", - phb->hose->global_number, pe_no, rc); - - /* For now, let's only display the diag buffer when we fail to clear - * the EEH status. We'll do more sensible things later when we have - * proper EEH support. We need to make sure we don't pollute ourselves - * with the normal errors generated when probing empty slots - */ - if (has_diag) - pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob); - else - pr_warning("PCI %d: No diag data available\n", - phb->hose->global_number); + } else { + rc = opal_pci_eeh_freeze_clear(phb->opal_id, + pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (rc) { + pr_warn("%s: Failure %ld clearing frozen " + "PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + pe_no); + ret = -EIO; + } } + /* + * For now, let's only display the diag buffer when we fail to clear + * the EEH status. We'll do more sensible things later when we have + * proper EEH support. We need to make sure we don't pollute ourselves + * with the normal errors generated when probing empty slots + */ + if (has_diag && ret) + pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob); + spin_unlock_irqrestore(&phb->lock, flags); } static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct device_node *dn) { - s64 rc; u8 fstate; __be16 pcierr; - u32 pe_no; + int pe_no; + s64 rc; /* * Get the PE#. During the PCI probe stage, we might not @@ -370,20 +397,42 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, pe_no = phb->ioda.reserved_pe; } - /* Read freeze status */ - rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr, - NULL); - if (rc) { - pr_warning("%s: Can't read EEH status (PE#%d) for " - "%s, err %lld\n", - __func__, pe_no, dn->full_name, rc); - return; + /* + * Fetch frozen state. If the PHB support compound PE, + * we need handle that case. + */ + if (phb->get_pe_state) { + fstate = phb->get_pe_state(phb, pe_no); + } else { + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe_no, + &fstate, + &pcierr, + NULL); + if (rc) { + pr_warn("%s: Failure %lld getting PHB#%x-PE#%x state\n", + __func__, rc, phb->hose->global_number, pe_no); + return; + } } + cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n", (PCI_DN(dn)->busno << 8) | (PCI_DN(dn)->devfn), pe_no, fstate); - if (fstate != 0) + + /* Clear the frozen state if applicable */ + if (fstate == OPAL_EEH_STOPPED_MMIO_FREEZE || + fstate == OPAL_EEH_STOPPED_DMA_FREEZE || + fstate == OPAL_EEH_STOPPED_MMIO_DMA_FREEZE) { + /* + * If PHB supports compound PE, freeze it for + * consistency. + */ + if (phb->freeze_pe) + phb->freeze_pe(phb, pe_no); + pnv_pci_handle_eeh_config(phb, pe_no); + } } int pnv_pci_cfg_read(struct device_node *dn, @@ -564,10 +613,11 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, proto_tce |= TCE_PCI_WRITE; tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset; - rpn = __pa(uaddr) >> TCE_SHIFT; + rpn = __pa(uaddr) >> tbl->it_page_shift; while (npages--) - *(tcep++) = cpu_to_be64(proto_tce | (rpn++ << TCE_RPN_SHIFT)); + *(tcep++) = cpu_to_be64(proto_tce | + (rpn++ << tbl->it_page_shift)); /* Some implementations won't cache invalid TCEs and thus may not * need that flush. We'll probably turn it_type into a bit mask @@ -627,11 +677,11 @@ static void pnv_tce_free_rm(struct iommu_table *tbl, long index, long npages) void pnv_pci_setup_iommu_table(struct iommu_table *tbl, void *tce_mem, u64 tce_size, - u64 dma_offset) + u64 dma_offset, unsigned page_shift) { tbl->it_blocksize = 16; tbl->it_base = (unsigned long)tce_mem; - tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->it_page_shift = page_shift; tbl->it_offset = dma_offset >> tbl->it_page_shift; tbl->it_index = 0; tbl->it_size = tce_size >> 3; @@ -656,7 +706,7 @@ static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose) if (WARN_ON(!tbl)) return NULL; pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)), - be32_to_cpup(sizep), 0); + be32_to_cpup(sizep), 0, IOMMU_PAGE_SHIFT_4K); iommu_init_table(tbl, hose->node); iommu_register_group(tbl, pci_domain_nr(hose->bus), 0); @@ -842,5 +892,4 @@ static int __init tce_iommu_bus_notifier_init(void) bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); return 0; } - -subsys_initcall_sync(tce_iommu_bus_notifier_init); +machine_subsys_initcall_sync(powernv, tce_iommu_bus_notifier_init); diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 676232c34328..48494d4b6058 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -21,6 +21,8 @@ enum pnv_phb_model { #define PNV_IODA_PE_DEV (1 << 0) /* PE has single PCI device */ #define PNV_IODA_PE_BUS (1 << 1) /* PE has primary PCI bus */ #define PNV_IODA_PE_BUS_ALL (1 << 2) /* PE has subordinate buses */ +#define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case */ +#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */ /* Data associated with a PE, including IOMMU tracking etc.. */ struct pnv_phb; @@ -64,6 +66,10 @@ struct pnv_ioda_pe { */ int mve_number; + /* PEs in compound case */ + struct pnv_ioda_pe *master; + struct list_head slaves; + /* Link in list of PE#s */ struct list_head dma_link; struct list_head list; @@ -119,6 +125,12 @@ struct pnv_phb { void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); void (*shutdown)(struct pnv_phb *phb); + int (*init_m64)(struct pnv_phb *phb); + void (*alloc_m64_pe)(struct pnv_phb *phb); + int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all); + int (*get_pe_state)(struct pnv_phb *phb, int pe_no); + void (*freeze_pe)(struct pnv_phb *phb, int pe_no); + int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt); union { struct { @@ -129,9 +141,20 @@ struct pnv_phb { /* Global bridge info */ unsigned int total_pe; unsigned int reserved_pe; + + /* 32-bit MMIO window */ unsigned int m32_size; unsigned int m32_segsize; unsigned int m32_pci_base; + + /* 64-bit MMIO window */ + unsigned int m64_bar_idx; + unsigned long m64_size; + unsigned long m64_segsize; + unsigned long m64_base; + unsigned long m64_bar_alloc; + + /* IO ports */ unsigned int io_size; unsigned int io_segsize; unsigned int io_pci_base; @@ -198,7 +221,7 @@ int pnv_pci_cfg_write(struct device_node *dn, int where, int size, u32 val); extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, void *tce_mem, u64 tce_size, - u64 dma_offset); + u64 dma_offset, unsigned page_shift); extern void pnv_pci_init_p5ioc2_hub(struct device_node *np); extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c index 1cb160dc1609..80db43944afe 100644 --- a/arch/powerpc/platforms/powernv/rng.c +++ b/arch/powerpc/platforms/powernv/rng.c @@ -123,4 +123,4 @@ static __init int rng_init(void) return 0; } -subsys_initcall(rng_init); +machine_subsys_initcall(powernv, rng_init); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index d9b88fa7c5a3..5a0e2dc6de5f 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -264,6 +264,8 @@ static void __init pnv_setup_machdep_opal(void) ppc_md.halt = pnv_halt; ppc_md.machine_check_exception = opal_machine_check; ppc_md.mce_check_early_recovery = opal_mce_check_early_recovery; + ppc_md.hmi_exception_early = opal_hmi_exception_early; + ppc_md.handle_hmi_exception = opal_handle_hmi_exception; } #ifdef CONFIG_PPC_POWERNV_RTAS diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index 7d61498e45c0..1062f71f5a85 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -29,6 +29,7 @@ #include <asm/lppaca.h> #include <asm/debug.h> #include <asm/plpar_wrappers.h> +#include <asm/machdep.h> struct dtl { struct dtl_entry *buf; @@ -391,4 +392,4 @@ err_remove_dir: err: return rc; } -arch_initcall(dtl_init); +machine_arch_initcall(pseries, dtl_init); diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 0bec0c02c5e7..b08053819d99 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -89,26 +89,26 @@ static int pseries_eeh_init(void) * of domain/bus/slot/function for EEH RTAS operations. */ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n", + pr_warn("%s: RTAS service <ibm,set-eeh-option> invalid\n", __func__); return -EINVAL; } else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,set-slot-reset> invalid\n", + pr_warn("%s: RTAS service <ibm,set-slot-reset> invalid\n", __func__); return -EINVAL; } else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,read-slot-reset-state2> and " + pr_warn("%s: RTAS service <ibm,read-slot-reset-state2> and " "<ibm,read-slot-reset-state> invalid\n", __func__); return -EINVAL; } else if (ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n", + pr_warn("%s: RTAS service <ibm,slot-error-detail> invalid\n", __func__); return -EINVAL; } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,configure-pe> and " + pr_warn("%s: RTAS service <ibm,configure-pe> and " "<ibm,configure-bridge> invalid\n", __func__); return -EINVAL; @@ -118,17 +118,17 @@ static int pseries_eeh_init(void) spin_lock_init(&slot_errbuf_lock); eeh_error_buf_size = rtas_token("rtas-error-log-max"); if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: unknown EEH error log size\n", + pr_warn("%s: unknown EEH error log size\n", __func__); eeh_error_buf_size = 1024; } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { - pr_warning("%s: EEH error log size %d exceeds the maximal %d\n", + pr_warn("%s: EEH error log size %d exceeds the maximal %d\n", __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX); eeh_error_buf_size = RTAS_ERROR_LOG_MAX; } /* Set EEH probe mode */ - eeh_probe_mode_set(EEH_PROBE_MODE_DEVTREE); + eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG); return 0; } @@ -270,7 +270,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) /* Retrieve the device address */ regs = of_get_property(dn, "reg", NULL); if (!regs) { - pr_warning("%s: OF node property %s::reg not found\n", + pr_warn("%s: OF node property %s::reg not found\n", __func__, dn->full_name); return NULL; } @@ -297,7 +297,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) enable = 1; if (enable) { - eeh_set_enable(true); + eeh_add_flag(EEH_ENABLED); eeh_add_to_parent_pe(edev); pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n", @@ -398,7 +398,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe) pe->config_addr, BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid), 0); if (ret) { - pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n", + pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n", __func__, pe->phb->global_number, pe->config_addr); return 0; } @@ -411,7 +411,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe) pe->config_addr, BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid), 0); if (ret) { - pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n", + pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n", __func__, pe->phb->global_number, pe->config_addr); return 0; } @@ -584,17 +584,17 @@ static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait) return ret; if (max_wait <= 0) { - pr_warning("%s: Timeout when getting PE's state (%d)\n", + pr_warn("%s: Timeout when getting PE's state (%d)\n", __func__, max_wait); return EEH_STATE_NOT_SUPPORT; } if (mwait <= 0) { - pr_warning("%s: Firmware returned bad wait value %d\n", + pr_warn("%s: Firmware returned bad wait value %d\n", __func__, mwait); mwait = EEH_STATE_MIN_WAIT_TIME; } else if (mwait > EEH_STATE_MAX_WAIT_TIME) { - pr_warning("%s: Firmware returned too long wait value %d\n", + pr_warn("%s: Firmware returned too long wait value %d\n", __func__, mwait); mwait = EEH_STATE_MAX_WAIT_TIME; } @@ -675,7 +675,7 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) } if (ret) - pr_warning("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", + pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", __func__, pe->phb->global_number, pe->addr, ret); return ret; @@ -743,10 +743,7 @@ static struct eeh_ops pseries_eeh_ops = { */ static int __init eeh_pseries_init(void) { - int ret = -EINVAL; - - if (!machine_is(pseries)) - return ret; + int ret; ret = eeh_ops_register(&pseries_eeh_ops); if (!ret) @@ -757,5 +754,4 @@ static int __init eeh_pseries_init(void) return ret; } - -early_initcall(eeh_pseries_init); +machine_early_initcall(pseries, eeh_pseries_init); diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S index 99ecf0a5a929..3fda3f17b84e 100644 --- a/arch/powerpc/platforms/pseries/hvCall.S +++ b/arch/powerpc/platforms/pseries/hvCall.S @@ -12,9 +12,13 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/ptrace.h> +#include <asm/jump_label.h> + + .section ".text" #ifdef CONFIG_TRACEPOINTS +#ifndef CONFIG_JUMP_LABEL .section ".toc","aw" .globl hcall_tracepoint_refcount @@ -22,21 +26,13 @@ hcall_tracepoint_refcount: .llong 0 .section ".text" +#endif /* * precall must preserve all registers. use unused STK_PARAM() - * areas to save snapshots and opcode. We branch around this - * in early init (eg when populating the MMU hashtable) by using an - * unconditional cpu feature. + * areas to save snapshots and opcode. */ #define HCALL_INST_PRECALL(FIRST_REG) \ -BEGIN_FTR_SECTION; \ - b 1f; \ -END_FTR_SECTION(0, 1); \ - ld r12,hcall_tracepoint_refcount@toc(r2); \ - std r12,32(r1); \ - cmpdi r12,0; \ - beq+ 1f; \ mflr r0; \ std r3,STK_PARAM(R3)(r1); \ std r4,STK_PARAM(R4)(r1); \ @@ -50,45 +46,29 @@ END_FTR_SECTION(0, 1); \ addi r4,r1,STK_PARAM(FIRST_REG); \ stdu r1,-STACK_FRAME_OVERHEAD(r1); \ bl __trace_hcall_entry; \ - addi r1,r1,STACK_FRAME_OVERHEAD; \ - ld r0,16(r1); \ - ld r3,STK_PARAM(R3)(r1); \ - ld r4,STK_PARAM(R4)(r1); \ - ld r5,STK_PARAM(R5)(r1); \ - ld r6,STK_PARAM(R6)(r1); \ - ld r7,STK_PARAM(R7)(r1); \ - ld r8,STK_PARAM(R8)(r1); \ - ld r9,STK_PARAM(R9)(r1); \ - ld r10,STK_PARAM(R10)(r1); \ - mtlr r0; \ -1: + ld r3,STACK_FRAME_OVERHEAD+STK_PARAM(R3)(r1); \ + ld r4,STACK_FRAME_OVERHEAD+STK_PARAM(R4)(r1); \ + ld r5,STACK_FRAME_OVERHEAD+STK_PARAM(R5)(r1); \ + ld r6,STACK_FRAME_OVERHEAD+STK_PARAM(R6)(r1); \ + ld r7,STACK_FRAME_OVERHEAD+STK_PARAM(R7)(r1); \ + ld r8,STACK_FRAME_OVERHEAD+STK_PARAM(R8)(r1); \ + ld r9,STACK_FRAME_OVERHEAD+STK_PARAM(R9)(r1); \ + ld r10,STACK_FRAME_OVERHEAD+STK_PARAM(R10)(r1) /* * postcall is performed immediately before function return which - * allows liberal use of volatile registers. We branch around this - * in early init (eg when populating the MMU hashtable) by using an - * unconditional cpu feature. + * allows liberal use of volatile registers. */ #define __HCALL_INST_POSTCALL \ -BEGIN_FTR_SECTION; \ - b 1f; \ -END_FTR_SECTION(0, 1); \ - ld r12,32(r1); \ - cmpdi r12,0; \ - beq+ 1f; \ - mflr r0; \ - ld r6,STK_PARAM(R3)(r1); \ - std r3,STK_PARAM(R3)(r1); \ + ld r0,STACK_FRAME_OVERHEAD+STK_PARAM(R3)(r1); \ + std r3,STACK_FRAME_OVERHEAD+STK_PARAM(R3)(r1); \ mr r4,r3; \ - mr r3,r6; \ - std r0,16(r1); \ - stdu r1,-STACK_FRAME_OVERHEAD(r1); \ + mr r3,r0; \ bl __trace_hcall_exit; \ + ld r0,STACK_FRAME_OVERHEAD+16(r1); \ addi r1,r1,STACK_FRAME_OVERHEAD; \ - ld r0,16(r1); \ ld r3,STK_PARAM(R3)(r1); \ - mtlr r0; \ -1: + mtlr r0 #define HCALL_INST_POSTCALL_NORETS \ li r5,0; \ @@ -98,37 +78,62 @@ END_FTR_SECTION(0, 1); \ mr r5,BUFREG; \ __HCALL_INST_POSTCALL +#ifdef CONFIG_JUMP_LABEL +#define HCALL_BRANCH(LABEL) \ + ARCH_STATIC_BRANCH(LABEL, hcall_tracepoint_key) +#else + +/* + * We branch around this in early init (eg when populating the MMU + * hashtable) by using an unconditional cpu feature. + */ +#define HCALL_BRANCH(LABEL) \ +BEGIN_FTR_SECTION; \ + b 1f; \ +END_FTR_SECTION(0, 1); \ + ld r12,hcall_tracepoint_refcount@toc(r2); \ + std r12,32(r1); \ + cmpdi r12,0; \ + bne- LABEL; \ +1: +#endif + #else #define HCALL_INST_PRECALL(FIRST_ARG) #define HCALL_INST_POSTCALL_NORETS #define HCALL_INST_POSTCALL(BUFREG) +#define HCALL_BRANCH(LABEL) #endif - .text - _GLOBAL_TOC(plpar_hcall_norets) HMT_MEDIUM mfcr r0 stw r0,8(r1) - - HCALL_INST_PRECALL(R4) - + HCALL_BRANCH(plpar_hcall_norets_trace) HVSC /* invoke the hypervisor */ - HCALL_INST_POSTCALL_NORETS - lwz r0,8(r1) mtcrf 0xff,r0 blr /* return r3 = status */ +#ifdef CONFIG_TRACEPOINTS +plpar_hcall_norets_trace: + HCALL_INST_PRECALL(R4) + HVSC + HCALL_INST_POSTCALL_NORETS + lwz r0,8(r1) + mtcrf 0xff,r0 + blr +#endif + _GLOBAL_TOC(plpar_hcall) HMT_MEDIUM mfcr r0 stw r0,8(r1) - HCALL_INST_PRECALL(R5) + HCALL_BRANCH(plpar_hcall_trace) std r4,STK_PARAM(R4)(r1) /* Save ret buffer */ @@ -147,12 +152,40 @@ _GLOBAL_TOC(plpar_hcall) std r6, 16(r12) std r7, 24(r12) + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +#ifdef CONFIG_TRACEPOINTS +plpar_hcall_trace: + HCALL_INST_PRECALL(R5) + + std r4,STK_PARAM(R4)(r1) + mr r0,r4 + + mr r4,r5 + mr r5,r6 + mr r6,r7 + mr r7,r8 + mr r8,r9 + mr r9,r10 + + HVSC + + ld r12,STK_PARAM(R4)(r1) + std r4,0(r12) + std r5,8(r12) + std r6,16(r12) + std r7,24(r12) + HCALL_INST_POSTCALL(r12) lwz r0,8(r1) mtcrf 0xff,r0 - blr /* return r3 = status */ + blr +#endif /* * plpar_hcall_raw can be called in real mode. kexec/kdump need some @@ -194,7 +227,7 @@ _GLOBAL_TOC(plpar_hcall9) mfcr r0 stw r0,8(r1) - HCALL_INST_PRECALL(R5) + HCALL_BRANCH(plpar_hcall9_trace) std r4,STK_PARAM(R4)(r1) /* Save ret buffer */ @@ -222,12 +255,49 @@ _GLOBAL_TOC(plpar_hcall9) std r11,56(r12) std r0, 64(r12) + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +#ifdef CONFIG_TRACEPOINTS +plpar_hcall9_trace: + HCALL_INST_PRECALL(R5) + + std r4,STK_PARAM(R4)(r1) + mr r0,r4 + + mr r4,r5 + mr r5,r6 + mr r6,r7 + mr r7,r8 + mr r8,r9 + mr r9,r10 + ld r10,STACK_FRAME_OVERHEAD+STK_PARAM(R11)(r1) + ld r11,STACK_FRAME_OVERHEAD+STK_PARAM(R12)(r1) + ld r12,STACK_FRAME_OVERHEAD+STK_PARAM(R13)(r1) + + HVSC + + mr r0,r12 + ld r12,STACK_FRAME_OVERHEAD+STK_PARAM(R4)(r1) + std r4,0(r12) + std r5,8(r12) + std r6,16(r12) + std r7,24(r12) + std r8,32(r12) + std r9,40(r12) + std r10,48(r12) + std r11,56(r12) + std r0,64(r12) + HCALL_INST_POSTCALL(r12) lwz r0,8(r1) mtcrf 0xff,r0 - blr /* return r3 = status */ + blr +#endif /* See plpar_hcall_raw to see why this is needed */ _GLOBAL(plpar_hcall9_raw) diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index cf4e7736e4f1..4575f0c9e521 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -27,6 +27,7 @@ #include <asm/firmware.h> #include <asm/cputable.h> #include <asm/trace.h> +#include <asm/machdep.h> DEFINE_PER_CPU(struct hcall_stats[HCALL_STAT_ARRAY_SIZE], hcall_stats); @@ -162,4 +163,4 @@ static int __init hcall_inst_init(void) return 0; } -__initcall(hcall_inst_init); +machine_device_initcall(pseries, hcall_inst_init); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index b02af9ef3ff6..fbfcef514aa7 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -26,6 +26,7 @@ #include <linux/dma-mapping.h> #include <linux/console.h> #include <linux/export.h> +#include <linux/static_key.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/page.h> @@ -649,6 +650,19 @@ EXPORT_SYMBOL(arch_free_page); #endif #ifdef CONFIG_TRACEPOINTS +#ifdef CONFIG_JUMP_LABEL +struct static_key hcall_tracepoint_key = STATIC_KEY_INIT; + +void hcall_tracepoint_regfunc(void) +{ + static_key_slow_inc(&hcall_tracepoint_key); +} + +void hcall_tracepoint_unregfunc(void) +{ + static_key_slow_dec(&hcall_tracepoint_key); +} +#else /* * We optimise our hcall path by placing hcall_tracepoint_refcount * directly in the TOC so we can check if the hcall tracepoints are @@ -658,13 +672,6 @@ EXPORT_SYMBOL(arch_free_page); /* NB: reg/unreg are called while guarded with the tracepoints_mutex */ extern long hcall_tracepoint_refcount; -/* - * Since the tracing code might execute hcalls we need to guard against - * recursion. One example of this are spinlocks calling H_YIELD on - * shared processor partitions. - */ -static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); - void hcall_tracepoint_regfunc(void) { hcall_tracepoint_refcount++; @@ -674,6 +681,15 @@ void hcall_tracepoint_unregfunc(void) { hcall_tracepoint_refcount--; } +#endif + +/* + * Since the tracing code might execute hcalls we need to guard against + * recursion. One example of this are spinlocks calling H_YIELD on + * shared processor partitions. + */ +static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); + void __trace_hcall_entry(unsigned long opcode, unsigned long *args) { diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c index bde7ebad3949..d146fef038b8 100644 --- a/arch/powerpc/platforms/pseries/mobility.c +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/slab.h> +#include <asm/machdep.h> #include <asm/rtas.h> #include "pseries.h" @@ -362,4 +363,4 @@ static int __init mobility_sysfs_init(void) return rc; } -device_initcall(mobility_sysfs_init); +machine_device_initcall(pseries, mobility_sysfs_init); diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 0c882e83c4ce..18ff4626d74e 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -16,6 +16,7 @@ #include <asm/rtas.h> #include <asm/hw_irq.h> #include <asm/ppc-pci.h> +#include <asm/machdep.h> static int query_token, change_token; @@ -532,5 +533,4 @@ static int rtas_msi_init(void) return 0; } -arch_initcall(rtas_msi_init); - +machine_arch_initcall(pseries, rtas_msi_init); diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 203cbf0dc101..89e23811199c 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -118,10 +118,10 @@ int remove_phb_dynamic(struct pci_controller *phb) } } - /* Unregister the bridge device from sysfs and remove the PCI bus */ - device_unregister(b->bridge); + /* Remove the PCI bus and unregister the bridge device from sysfs */ phb->bus = NULL; pci_remove_bus(b); + device_unregister(b->bridge); /* Now release the IO resource */ if (res->flags & IORESOURCE_IO) diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index 6d6266236446..c26eadde434c 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -25,6 +25,7 @@ #include <linux/string.h> #include <linux/errno.h> #include <linux/init.h> +#include <asm/machdep.h> unsigned long rtas_poweron_auto; /* default and normal state is 0 */ @@ -71,11 +72,11 @@ static int __init pm_init(void) return -ENOMEM; return sysfs_create_group(power_kobj, &attr_group); } -core_initcall(pm_init); +machine_core_initcall(pseries, pm_init); #else static int __init apo_pm_init(void) { return (sysfs_create_file(power_kobj, &auto_poweron_attr.attr)); } -__initcall(apo_pm_init); +machine_device_initcall(pseries, apo_pm_init); #endif diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 9c5778e6ed4b..dff05b9eb946 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -71,7 +71,7 @@ static int __init init_ras_IRQ(void) return 0; } -subsys_initcall(init_ras_IRQ); +machine_subsys_initcall(pseries, init_ras_IRQ); #define EPOW_SHUTDOWN_NORMAL 1 #define EPOW_SHUTDOWN_ON_UPS 2 diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 1c0a60d98867..0f319521e002 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -446,13 +446,10 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!machine_is(pseries)) - return 0; - ent = proc_create("powerpc/ofdt", S_IWUSR, NULL, &ofdt_fops); if (ent) proc_set_size(ent, 0); return 0; } -__initcall(proc_ppc64_create_ofdt); +machine_device_initcall(pseries, proc_ppc64_create_ofdt); diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c index 72a102758d4e..e09608770909 100644 --- a/arch/powerpc/platforms/pseries/rng.c +++ b/arch/powerpc/platforms/pseries/rng.c @@ -42,4 +42,4 @@ static __init int rng_init(void) return 0; } -subsys_initcall(rng_init); +machine_subsys_initcall(pseries, rng_init); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index f2f40e64658f..cfe8a6389a51 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -351,7 +351,7 @@ static int alloc_dispatch_log_kmem_cache(void) return alloc_dispatch_logs(); } -early_initcall(alloc_dispatch_log_kmem_cache); +machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache); static void pseries_lpar_idle(void) { diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index b87b97849d4c..e76aefae2aa2 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -265,7 +265,7 @@ static int __init pseries_suspend_init(void) { int rc; - if (!machine_is(pseries) || !firmware_has_feature(FW_FEATURE_LPAR)) + if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; suspend_data.token = rtas_token("ibm,suspend-me"); @@ -280,5 +280,4 @@ static int __init pseries_suspend_init(void) suspend_set_ops(&pseries_suspend_ops); return 0; } - -__initcall(pseries_suspend_init); +machine_device_initcall(pseries, pseries_suspend_init); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4bd091a05583..c5077673bd94 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -853,8 +853,8 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose) in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; for (i = 0; i < 4; i++) { /* not enabled, skip */ - if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) - continue; + if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN)) + continue; if (get_immrbase() == in_le32(&in[i].tar)) return (u64)in_le32(&in[i].barh) << 32 | diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c index c0bb76ef7242..6727dc54d549 100644 --- a/arch/powerpc/sysdev/micropatch.c +++ b/arch/powerpc/sysdev/micropatch.c @@ -13,7 +13,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <asm/irq.h> -#include <asm/mpc8xx.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h> diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 2c9b52aa266c..7bdf3cc741e4 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -184,7 +184,7 @@ static int mpic_msgr_probe(struct platform_device *dev) dev_info(&dev->dev, "Found %d message registers\n", mpic_msgr_count); - mpic_msgrs = kzalloc(sizeof(struct mpic_msgr) * mpic_msgr_count, + mpic_msgrs = kcalloc(mpic_msgr_count, sizeof(*mpic_msgrs), GFP_KERNEL); if (!mpic_msgrs) { dev_err(&dev->dev, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index d199bfa2f1fa..8d198b5e9e0a 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2058,10 +2058,6 @@ static void dump_one_paca(int cpu) DUMP(p, kernel_toc, "lx"); DUMP(p, kernelbase, "lx"); DUMP(p, kernel_msr, "lx"); -#ifdef CONFIG_PPC_STD_MMU_64 - DUMP(p, stab_real, "lx"); - DUMP(p, stab_addr, "lx"); -#endif DUMP(p, emergency_sp, "p"); #ifdef CONFIG_PPC_BOOK3S_64 DUMP(p, mc_emergency_sp, "p"); @@ -2694,7 +2690,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid, } #ifdef CONFIG_PPC_BOOK3S_64 -static void dump_slb(void) +void dump_segments(void) { int i; unsigned long esid,vsid,valid; @@ -2726,34 +2722,6 @@ static void dump_slb(void) } } } - -static void dump_stab(void) -{ - int i; - unsigned long *tmp = (unsigned long *)local_paca->stab_addr; - - printf("Segment table contents of cpu 0x%x\n", smp_processor_id()); - - for (i = 0; i < PAGE_SIZE/16; i++) { - unsigned long a, b; - - a = *tmp++; - b = *tmp++; - - if (a || b) { - printf("%03d %016lx ", i, a); - printf("%016lx\n", b); - } - } -} - -void dump_segments(void) -{ - if (mmu_has_feature(MMU_FTR_SLB)) - dump_slb(); - else - dump_stab(); -} #endif #ifdef CONFIG_PPC_STD_MMU_32 |