summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel')
-rw-r--r--arch/powerpc/kernel/Makefile19
-rw-r--r--arch/powerpc/kernel/asm-offsets.c19
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S2
-rw-r--r--arch/powerpc/kernel/cputable.c62
-rw-r--r--arch/powerpc/kernel/dma-iommu.c2
-rw-r--r--arch/powerpc/kernel/dma-swiotlb.c53
-rw-r--r--arch/powerpc/kernel/dma.c13
-rw-r--r--arch/powerpc/kernel/entry_32.S20
-rw-r--r--arch/powerpc/kernel/entry_64.S102
-rw-r--r--arch/powerpc/kernel/exceptions-64e.S1001
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S78
-rw-r--r--arch/powerpc/kernel/fpu.S2
-rw-r--r--arch/powerpc/kernel/head_32.S40
-rw-r--r--arch/powerpc/kernel/head_40x.S124
-rw-r--r--arch/powerpc/kernel/head_44x.S58
-rw-r--r--arch/powerpc/kernel/head_64.S83
-rw-r--r--arch/powerpc/kernel/head_8xx.S13
-rw-r--r--arch/powerpc/kernel/head_booke.h50
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S100
-rw-r--r--arch/powerpc/kernel/ibmebus.c2
-rw-r--r--arch/powerpc/kernel/lparcfg.c3
-rw-r--r--arch/powerpc/kernel/misc_32.S7
-rw-r--r--arch/powerpc/kernel/of_platform.c2
-rw-r--r--arch/powerpc/kernel/paca.c3
-rw-r--r--arch/powerpc/kernel/pci-common.c133
-rw-r--r--arch/powerpc/kernel/pci_32.c105
-rw-r--r--arch/powerpc/kernel/pci_64.c335
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c358
-rw-r--r--arch/powerpc/kernel/perf_counter.c68
-rw-r--r--arch/powerpc/kernel/process.c16
-rw-r--r--arch/powerpc/kernel/prom_init.c107
-rw-r--r--arch/powerpc/kernel/rtas.c7
-rw-r--r--arch/powerpc/kernel/setup_32.c8
-rw-r--r--arch/powerpc/kernel/setup_64.c34
-rw-r--r--arch/powerpc/kernel/smp.c15
-rw-r--r--arch/powerpc/kernel/sys_ppc32.c12
-rw-r--r--arch/powerpc/kernel/sysfs.c3
-rw-r--r--arch/powerpc/kernel/time.c33
-rw-r--r--arch/powerpc/kernel/vdso.c7
-rw-r--r--arch/powerpc/kernel/vdso32/Makefile1
-rw-r--r--arch/powerpc/kernel/vdso64/Makefile2
-rw-r--r--arch/powerpc/kernel/vector.S2
-rw-r--r--arch/powerpc/kernel/vio.c2
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S8
44 files changed, 2254 insertions, 860 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9619285f64e8..569f79ccd310 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
- paca.o cpu_setup_ppc970.o \
- cpu_setup_pa6t.o \
- firmware.o nvram_64.o
+ paca.o nvram_64.o firmware.o
+obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
+obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
@@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o
-extra-$(CONFIG_PPC_STD_MMU) := head_32.o
-extra-$(CONFIG_PPC64) := head_64.o
+extra-y := head_$(CONFIG_WORD_SIZE).o
+extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o
extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
@@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
- pci-common.o
+ pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
@@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
+# Disable GCOV in odd or sensitive code
+GCOV_PROFILE_prom_init.o := n
+GCOV_PROFILE_ftrace.o := n
+GCOV_PROFILE_machine_kexec_64.o := n
+GCOV_PROFILE_machine_kexec_32.o := n
+GCOV_PROFILE_kprobes.o := n
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_ALTIVEC) += vector.o
extra-$(CONFIG_PPC64) += entry_64.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 197b15646eeb..f0df285f0f87 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,9 +52,11 @@
#include <linux/kvm_host.h>
#endif
+#ifdef CONFIG_PPC32
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include "head_booke.h"
#endif
+#endif
#if defined(CONFIG_FSL_BOOKE)
#include "../mm/mmu_decl.h"
@@ -140,6 +142,20 @@ int main(void)
context.high_slices_psize));
DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_PPC_BOOK3E
+ DEFINE(PACAPGD, offsetof(struct paca_struct, pgd));
+ DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd));
+ DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+ DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb));
+ DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+ DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit));
+ DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg));
+ DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
+ DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
+ DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+#endif /* CONFIG_PPC_BOOK3E */
+
#ifdef CONFIG_PPC_STD_MMU_64
DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
@@ -262,6 +278,7 @@ int main(void)
DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
#endif /* CONFIG_PPC64 */
+#if defined(CONFIG_PPC32)
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
@@ -280,7 +297,7 @@ int main(void)
DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
#endif
-
+#endif
DEFINE(CLONE_VM, CLONE_VM);
DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 1e9949e68856..55cba4a8a959 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603)
mflr r4
BEGIN_MMU_FTR_SECTION
li r10,0
- mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */
+ mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
BEGIN_FTR_SECTION
bl __init_fpu_registers
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 4a24a2fc4574..0b9c9135922e 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -89,11 +89,15 @@ extern void __restore_cpu_power7(void);
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_HAS_ALTIVEC_COMP)
+#ifdef CONFIG_PPC_BOOK3E_64
+#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
+#else
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
+#endif
static struct cpu_spec __initdata cpu_specs[] = {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
{ /* Power3 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00400000,
@@ -508,7 +512,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "power4",
}
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
#ifdef CONFIG_PPC32
#if CLASSIC_PPC
{ /* 601 */
@@ -1630,7 +1635,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.platform = "ppc440",
},
{ /* 460EX */
- .pvr_mask = 0xffff0002,
+ .pvr_mask = 0xffff0006,
.pvr_value = 0x13020002,
.cpu_name = "460EX",
.cpu_features = CPU_FTRS_440x6,
@@ -1642,8 +1647,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460EX Rev B */
+ .pvr_mask = 0xffff0007,
+ .pvr_value = 0x13020004,
+ .cpu_name = "460EX Rev. B",
+ .cpu_features = CPU_FTRS_440x6,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460ex,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
{ /* 460GT */
- .pvr_mask = 0xffff0002,
+ .pvr_mask = 0xffff0006,
.pvr_value = 0x13020000,
.cpu_name = "460GT",
.cpu_features = CPU_FTRS_440x6,
@@ -1655,6 +1673,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460GT Rev B */
+ .pvr_mask = 0xffff0007,
+ .pvr_value = 0x13020005,
+ .cpu_name = "460GT Rev. B",
+ .cpu_features = CPU_FTRS_440x6,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460gt,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
{ /* 460SX */
.pvr_mask = 0xffffff00,
.pvr_value = 0x13541800,
@@ -1797,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = {
}
#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC_BOOK3E_64
+ { /* This is a default entry to get going, to be replaced by
+ * a real one at some stage
+ */
+#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+ CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "Book3E",
+ .cpu_features = CPU_FTRS_BASE_BOOK3E,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+ MMU_FTR_USE_TLBIVAX_BCAST |
+ MMU_FTR_LOCK_BCAST_INVAL,
+ .icache_bsize = 64,
+ .dcache_bsize = 64,
+ .num_pmcs = 0,
+ .machine_check = machine_check_generic,
+ .platform = "power6",
+ },
+#endif
};
static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2983adac8cc3..87ddb3fb948c 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
return 1;
}
-struct dma_mapping_ops dma_iommu_ops = {
+struct dma_map_ops dma_iommu_ops = {
.alloc_coherent = dma_iommu_alloc_coherent,
.free_coherent = dma_iommu_free_coherent,
.map_sg = dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e8a57de85bcf..e96cbbd9b449 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -25,33 +25,13 @@ int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
/*
- * Determine if an address is reachable by a pci device, or if we must bounce.
- */
-static int
-swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
- dma_addr_t max;
- struct pci_controller *hose;
- struct pci_dev *pdev = to_pci_dev(hwdev);
-
- hose = pci_bus_to_host(pdev->bus);
- max = hose->dma_window_base_cur + hose->dma_window_size;
-
- /* check that we're within mapped pci window space */
- if ((addr + size > max) | (addr < hose->dma_window_base_cur))
- return 1;
-
- return 0;
-}
-
-/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
* we don't ever call anything other than map_sg, unmap_sg,
* map_page, and unmap_page on highmem, use normal dma_ops
* for everything else.
*/
-struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_map_ops swiotlb_dma_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
.map_sg = swiotlb_map_sg_attrs,
@@ -62,33 +42,34 @@ struct dma_mapping_ops swiotlb_dma_ops = {
.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
- .sync_sg_for_device = swiotlb_sync_sg_for_device
+ .sync_sg_for_device = swiotlb_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
};
-struct dma_mapping_ops swiotlb_pci_dma_ops = {
- .alloc_coherent = dma_direct_alloc_coherent,
- .free_coherent = dma_direct_free_coherent,
- .map_sg = swiotlb_map_sg_attrs,
- .unmap_sg = swiotlb_unmap_sg_attrs,
- .dma_supported = swiotlb_dma_supported,
- .map_page = swiotlb_map_page,
- .unmap_page = swiotlb_unmap_page,
- .addr_needs_map = swiotlb_pci_addr_needs_map,
- .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
- .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
- .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
- .sync_sg_for_device = swiotlb_sync_sg_for_device
-};
+void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
+{
+ struct pci_controller *hose;
+ struct dev_archdata *sd;
+
+ hose = pci_bus_to_host(pdev->bus);
+ sd = &pdev->dev.archdata;
+ sd->max_direct_dma_addr =
+ hose->dma_window_base_cur + hose->dma_window_size;
+}
static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
+ struct dev_archdata *sd;
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
+ sd = &dev->archdata;
+ sd->max_direct_dma_addr = 0;
+
/* May need to bounce if the device can't address all of DRAM */
if (dma_get_mask(dev) < lmb_end_of_DRAM())
set_dma_ops(dev, &swiotlb_dma_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index ccf129d47d84..21b784d7e7d0 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
#include <linux/lmb.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
@@ -140,7 +141,7 @@ static inline void dma_direct_sync_single_range(struct device *dev,
}
#endif
-struct dma_mapping_ops dma_direct_ops = {
+struct dma_map_ops dma_direct_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
.map_sg = dma_direct_map_sg,
@@ -156,3 +157,13 @@ struct dma_mapping_ops dma_direct_ops = {
#endif
};
EXPORT_SYMBOL(dma_direct_ops);
+
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+ return 0;
+}
+fs_initcall(dma_init);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3cadba60a4b6..1175a8539e6c 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -88,7 +88,7 @@ crit_transfer_to_handler:
mfspr r0,SPRN_SRR1
stw r0,_SRR1(r11)
- mfspr r8,SPRN_SPRG3
+ mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,SAVED_KSP_LIMIT(r11)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
@@ -108,7 +108,7 @@ crit_transfer_to_handler:
mfspr r0,SPRN_SRR1
stw r0,crit_srr1@l(0)
- mfspr r8,SPRN_SPRG3
+ mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,saved_ksp_limit@l(0)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
@@ -138,7 +138,7 @@ transfer_to_handler:
mfspr r2,SPRN_XER
stw r12,_CTR(r11)
stw r2,_XER(r11)
- mfspr r12,SPRN_SPRG3
+ mfspr r12,SPRN_SPRG_THREAD
addi r2,r12,-THREAD
tovirt(r2,r2) /* set r2 to current */
beq 2f /* if from user, fix up THREAD.regs */
@@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
tophys(r0,r4)
CLR_TOP32(r0)
- mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */
+ mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */
lwz r1,KSP(r4) /* Load new stack pointer */
/* save the old current 'last' for return value */
@@ -1057,7 +1057,7 @@ exc_exit_restart_end:
#ifdef CONFIG_40x
.globl ret_from_crit_exc
ret_from_crit_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lis r10,saved_ksp_limit@ha;
lwz r10,saved_ksp_limit@l(r10);
tovirt(r9,r9);
@@ -1074,7 +1074,7 @@ ret_from_crit_exc:
#ifdef CONFIG_BOOKE
.globl ret_from_crit_exc
ret_from_crit_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
@@ -1083,7 +1083,7 @@ ret_from_crit_exc:
.globl ret_from_debug_exc
ret_from_debug_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
lwz r9,THREAD_INFO-THREAD(r9)
@@ -1097,7 +1097,7 @@ ret_from_debug_exc:
.globl ret_from_mcheck_exc
ret_from_mcheck_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
@@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas)
MTMSRD(r0) /* don't get trashed */
li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtlr r6
- mtspr SPRN_SPRG2,r7
+ mtspr SPRN_SPRG_RTAS,r7
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI
@@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas)
FIX_SRR1(r9,r0)
addi r1,r1,INT_FRAME_SIZE
li r0,0
- mtspr SPRN_SPRG2,r0
+ mtspr SPRN_SPRG_RTAS,r0
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI /* return to caller */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 43e073477c34..66bcda34a6bb 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION
2:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
+
+ /* Hard enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
mfmsr r11
ori r11,r11,MSR_EE
mtmsrd r11,1
+#endif /* CONFIG_PPC_BOOK3E */
#ifdef SHOW_SYSCALLS
bl .do_show_syscall
@@ -168,15 +174,25 @@ syscall_exit:
#endif
clrrdi r12,r1,THREAD_SHIFT
- /* disable interrupts so current_thread_info()->flags can't change,
- and so that we don't get interrupted after loading SRR0/1. */
ld r8,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3S
+ /* No MSR:RI on BookE */
andi. r10,r8,MSR_RI
beq- unrecov_restore
+#endif
+
+ /* Disable interrupts so current_thread_info()->flags can't change,
+ * and so that we don't get interrupted after loading SRR0/1.
+ */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
mfmsr r10
rldicl r10,r10,48,1
rotldi r10,r10,16
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
+
ld r9,TI_FLAGS(r12)
li r11,-_LAST_ERRNO
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -194,9 +210,13 @@ syscall_error_cont:
* userspace and we take an exception after restoring r13,
* we end up corrupting the userspace r13 value.
*/
+#ifdef CONFIG_PPC_BOOK3S
+ /* No MSR:RI on BookE */
li r12,MSR_RI
andc r11,r10,r12
mtmsrd r11,1 /* clear MSR.RI */
+#endif /* CONFIG_PPC_BOOK3S */
+
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
@@ -206,7 +226,7 @@ syscall_error_cont:
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
- rfid
+ RFI
b . /* prevent speculative execution */
syscall_error:
@@ -276,9 +296,13 @@ syscall_exit_work:
beq .ret_from_except_lite
/* Re-enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
mfmsr r10
ori r10,r10,MSR_EE
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
and. r0,r0,r22
beq+ 1f
andc r22,r22,r0
- mtmsrd r22
+ MTMSRD(r22)
isync
1: std r20,_NIP(r1)
mfcr r23
@@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
+#ifdef CONFIG_PPC_BOOK3S
BEGIN_FTR_SECTION
BEGIN_FTR_SECTION_NESTED(95)
clrrdi r6,r8,28 /* get its ESID */
@@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
slbie r6 /* Workaround POWER5 < DD2.1 issue */
slbmte r7,r0
isync
-
2:
+#endif /* !CONFIG_PPC_BOOK3S */
+
clrrdi r7,r8,THREAD_SHIFT /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
@@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite)
* can't change between when we test it and when we return
* from the interrupt.
*/
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
mfmsr r10 /* Get current interrupt state */
rldicl r9,r10,48,1 /* clear MSR_EE */
rotldi r9,r9,16
mtmsrd r9,1 /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
#ifdef CONFIG_PREEMPT
clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
@@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */
stb r4,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+ b .exception_return_book3e
+#else
ld r4,_CTR(r1)
ld r0,_LINK(r1)
mtctr r4
@@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
rfid
b . /* prevent speculative execution */
+#endif /* CONFIG_PPC_BOOK3E */
+
iseries_check_pending_irqs:
#ifdef CONFIG_PPC_ISERIES
ld r5,SOFTE(r1)
@@ -638,6 +673,11 @@ do_work:
li r0,1
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+ bl .preempt_schedule
+ wrteei 0
+#else
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
bl .preempt_schedule
@@ -646,6 +686,7 @@ do_work:
rldicl r10,r10,48,1 /* disable interrupts again */
rotldi r10,r10,16
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
@@ -654,8 +695,12 @@ do_work:
user_work:
#endif
/* Enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
ori r10,r10,MSR_EE
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
@@ -762,7 +807,7 @@ _GLOBAL(enter_rtas)
_STATIC(rtas_return_loc)
/* relocation is off at this point */
- mfspr r4,SPRN_SPRG3 /* Get PACA */
+ mfspr r4,SPRN_SPRG_PACA /* Get PACA */
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
@@ -793,7 +838,7 @@ _STATIC(rtas_restore_regs)
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
- mfspr r13,SPRN_SPRG3
+ mfspr r13,SPRN_SPRG_PACA
ld r4,_CCR(r1)
mtcr r4
@@ -823,33 +868,24 @@ _GLOBAL(enter_prom)
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
- SAVE_8GPRS(2, r1)
+ SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
- mfcr r4
- std r4,_CCR(r1)
- mfctr r5
- std r5,_CTR(r1)
- mfspr r6,SPRN_XER
- std r6,_XER(r1)
- mfdar r7
- std r7,_DAR(r1)
- mfdsisr r8
- std r8,_DSISR(r1)
- mfsrr0 r9
- std r9,_SRR0(r1)
- mfsrr1 r10
- std r10,_SRR1(r1)
+ mfcr r10
mfmsr r11
+ std r10,_CCR(r1)
std r11,_MSR(r1)
/* Get the PROM entrypoint */
- ld r0,GPR4(r1)
- mtlr r0
+ mtlr r4
/* Switch MSR to 32 bits mode
*/
+#ifdef CONFIG_PPC_BOOK3E
+ rlwinm r11,r11,0,1,31
+ mtmsr r11
+#else /* CONFIG_PPC_BOOK3E */
mfmsr r11
li r12,1
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
@@ -858,10 +894,10 @@ _GLOBAL(enter_prom)
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
andc r11,r11,r12
mtmsrd r11
+#endif /* CONFIG_PPC_BOOK3E */
isync
- /* Restore arguments & enter PROM here... */
- ld r3,GPR3(r1)
+ /* Enter PROM here... */
blrl
/* Just make sure that r1 top 32 bits didn't get
@@ -871,7 +907,7 @@ _GLOBAL(enter_prom)
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
- mtmsrd r0
+ MTMSRD(r0)
isync
/* Restore other registers */
@@ -881,18 +917,6 @@ _GLOBAL(enter_prom)
REST_10GPRS(22, r1)
ld r4,_CCR(r1)
mtcr r4
- ld r5,_CTR(r1)
- mtctr r5
- ld r6,_XER(r1)
- mtspr SPRN_XER,r6
- ld r7,_DAR(r1)
- mtdar r7
- ld r8,_DSISR(r1)
- mtdsisr r8
- ld r9,_SRR0(r1)
- mtsrr0 r9
- ld r10,_SRR1(r1)
- mtsrr1 r10
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
new file mode 100644
index 000000000000..9048f96237f6
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -0,0 +1,1001 @@
+/*
+ * Boot code and exception vectors for Book3E processors
+ *
+ * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/thread_info.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/bug.h>
+#include <asm/irqflags.h>
+#include <asm/ptrace.h>
+#include <asm/ppc-opcode.h>
+#include <asm/mmu.h>
+
+/* XXX This will ultimately add space for a special exception save
+ * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
+ * when taking special interrupts. For now we don't support that,
+ * special interrupts from within a non-standard level will probably
+ * blow you up
+ */
+#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE
+
+/* Exception prolog code for all exceptions */
+#define EXCEPTION_PROLOG(n, type, addition) \
+ mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
+ mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \
+ std r10,PACA_EX##type+EX_R10(r13); \
+ std r11,PACA_EX##type+EX_R11(r13); \
+ mfcr r10; /* save CR */ \
+ addition; /* additional code for that exc. */ \
+ std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \
+ stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
+ mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \
+ type##_SET_KSTACK; /* get special stack if necessary */\
+ andi. r10,r11,MSR_PR; /* save stack pointer */ \
+ beq 1f; /* branch around if supervisor */ \
+ ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\
+1: cmpdi cr1,r1,0; /* check if SP makes sense */ \
+ bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
+ mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */
+
+/* Exception type-specific macros */
+#define GEN_SET_KSTACK \
+ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */
+#define SPRN_GEN_SRR0 SPRN_SRR0
+#define SPRN_GEN_SRR1 SPRN_SRR1
+
+#define CRIT_SET_KSTACK \
+ ld r1,PACA_CRIT_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_CRIT_SRR0 SPRN_CSRR0
+#define SPRN_CRIT_SRR1 SPRN_CSRR1
+
+#define DBG_SET_KSTACK \
+ ld r1,PACA_DBG_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_DBG_SRR0 SPRN_DSRR0
+#define SPRN_DBG_SRR1 SPRN_DSRR1
+
+#define MC_SET_KSTACK \
+ ld r1,PACA_MC_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_MC_SRR0 SPRN_MCSRR0
+#define SPRN_MC_SRR1 SPRN_MCSRR1
+
+#define NORMAL_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, GEN, addition##_GEN)
+
+#define CRIT_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, CRIT, addition##_CRIT)
+
+#define DBG_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, DBG, addition##_DBG)
+
+#define MC_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, MC, addition##_MC)
+
+
+/* Variants of the "addition" argument for the prolog
+ */
+#define PROLOG_ADDITION_NONE_GEN
+#define PROLOG_ADDITION_NONE_CRIT
+#define PROLOG_ADDITION_NONE_DBG
+#define PROLOG_ADDITION_NONE_MC
+
+#define PROLOG_ADDITION_MASKABLE_GEN \
+ lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \
+ cmpwi cr0,r11,0; /* yes -> go out of line */ \
+ beq masked_interrupt_book3e;
+
+#define PROLOG_ADDITION_2REGS_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13); \
+ std r15,PACA_EXGEN+EX_R15(r13)
+
+#define PROLOG_ADDITION_1REG_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13);
+
+#define PROLOG_ADDITION_2REGS_CRIT \
+ std r14,PACA_EXCRIT+EX_R14(r13); \
+ std r15,PACA_EXCRIT+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_DBG \
+ std r14,PACA_EXDBG+EX_R14(r13); \
+ std r15,PACA_EXDBG+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_MC \
+ std r14,PACA_EXMC+EX_R14(r13); \
+ std r15,PACA_EXMC+EX_R15(r13)
+
+/* Core exception code for all exceptions except TLB misses.
+ * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
+ */
+#define EXCEPTION_COMMON(n, excf, ints) \
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ std r10,_NIP(r1); /* save SRR0 to stackframe */ \
+ std r11,_MSR(r1); /* save SRR1 to stackframe */ \
+ ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \
+ ld r3,excf+EX_R10(r13); /* get back r10 */ \
+ ld r4,excf+EX_R11(r13); /* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
+ mflr r6; /* save LR in stackframe */ \
+ mfctr r7; /* save CTR in stackframe */ \
+ mfspr r8,SPRN_XER; /* save XER in stackframe */ \
+ ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \
+ lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \
+ lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \
+ ld r12,exception_marker@toc(r2); \
+ li r0,0; \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ std r6,_LINK(r1); \
+ std r7,_CTR(r1); \
+ std r8,_XER(r1); \
+ li r3,(n)+1; /* indicate partial regs in trap */ \
+ std r9,0(r1); /* store stack frame back link */ \
+ std r10,_CCR(r1); /* store orig CR in stackframe */ \
+ std r9,GPR1(r1); /* store stack frame back link */ \
+ std r11,SOFTE(r1); /* and save it to stackframe */ \
+ std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \
+ std r3,_TRAP(r1); /* set trap number */ \
+ std r0,RESULT(r1); /* clear regs->result */ \
+ ints;
+
+/* Variants for the "ints" argument */
+#define INTS_KEEP
+#define INTS_DISABLE_SOFT \
+ stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \
+ TRACE_DISABLE_INTS;
+#define INTS_DISABLE_HARD \
+ stb r0,PACAHARDIRQEN(r13); /* and hard disabled */
+#define INTS_DISABLE_ALL \
+ INTS_DISABLE_SOFT \
+ INTS_DISABLE_HARD
+
+/* This is called by exceptions that used INTS_KEEP (that is did not clear
+ * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE
+ * to it's previous value
+ *
+ * XXX In the long run, we may want to open-code it in order to separate the
+ * load from the wrtee, thus limiting the latency caused by the dependency
+ * but at this point, I'll favor code clarity until we have a near to final
+ * implementation
+ */
+#define INTS_RESTORE_HARD \
+ ld r11,_MSR(r1); \
+ wrtee r11;
+
+/* XXX FIXME: Restore r14/r15 when necessary */
+#define BAD_STACK_TRAMPOLINE(n) \
+exc_##n##_bad_stack: \
+ li r1,(n); /* get exception number */ \
+ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \
+ b bad_stack_book3e; /* bad stack error */
+
+#define EXCEPTION_STUB(loc, label) \
+ . = interrupt_base_book3e + loc; \
+ nop; /* To make debug interrupts happy */ \
+ b exc_##label##_book3e;
+
+#define ACK_NONE(r)
+#define ACK_DEC(r) \
+ lis r,TSR_DIS@h; \
+ mtspr SPRN_TSR,r
+#define ACK_FIT(r) \
+ lis r,TSR_FIS@h; \
+ mtspr SPRN_TSR,r
+
+#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \
+ START_EXCEPTION(label); \
+ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \
+ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \
+ ack(r8); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except_lite;
+
+/* This value is used to mark exception frames on the stack. */
+ .section ".toc","aw"
+exception_marker:
+ .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+
+
+/*
+ * And here we have the exception vectors !
+ */
+
+ .text
+ .balign 0x1000
+ .globl interrupt_base_book3e
+interrupt_base_book3e: /* fake trap */
+ /* Note: If real debug exceptions are supported by the HW, the vector
+ * below will have to be patched up to point to an appropriate handler
+ */
+ EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */
+ EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */
+ EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */
+ EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */
+ EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */
+ EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */
+ EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */
+ EXCEPTION_STUB(0x0e0, program) /* 0x0700 */
+ EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */
+ EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */
+ EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */
+ EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */
+ EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */
+ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */
+ EXCEPTION_STUB(0x1c0, data_tlb_miss)
+ EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+
+#if 0
+ EXCEPTION_STUB(0x280, processor_doorbell)
+ EXCEPTION_STUB(0x220, processor_doorbell_crit)
+#endif
+ .globl interrupt_end_book3e
+interrupt_end_book3e:
+
+/* Critical Input Interrupt */
+ START_EXCEPTION(critical_input);
+ CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .critical_exception
+// b ret_from_crit_except
+ b .
+
+/* Machine Check Interrupt */
+ START_EXCEPTION(machine_check);
+ CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
+// bl special_reg_save_mc
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .machine_check_exception
+// b ret_from_mc_except
+ b .
+
+/* Data Storage Interrupt */
+ START_EXCEPTION(data_storage)
+ NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* Instruction Storage Interrupt */
+ START_EXCEPTION(instruction_storage);
+ NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+ li r15,0
+ mr r14,r10
+ EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* External Input Interrupt */
+ MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+
+/* Alignment */
+ START_EXCEPTION(alignment);
+ NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
+ b alignment_more /* no room, go out of line */
+
+/* Program Interrupt */
+ START_EXCEPTION(program);
+ NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+ mfspr r14,SPRN_ESR
+ EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .program_check_exception
+ b .ret_from_except
+
+/* Floating Point Unavailable Interrupt */
+ START_EXCEPTION(fp_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+ /* we can probably do a shorter exception entry for that one... */
+ EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
+ bne 1f /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ INTS_RESTORE_HARD
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+1: ld r12,_MSR(r1)
+ bl .load_up_fpu
+ b fast_exception_return
+
+/* Decrementer Interrupt */
+ MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+
+/* Fixed Interval Timer Interrupt */
+ MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+
+/* Watchdog Timer Interrupt */
+ START_EXCEPTION(watchdog);
+ CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .unknown_exception
+// b ret_from_crit_except
+ b .
+
+/* System Call Interrupt */
+ START_EXCEPTION(system_call)
+ mr r9,r13 /* keep a copy of userland r13 */
+ mfspr r11,SPRN_SRR0 /* get return address */
+ mfspr r12,SPRN_SRR1 /* get previous MSR */
+ mfspr r13,SPRN_SPRG_PACA /* get our PACA */
+ b system_call_common
+
+/* Auxillary Processor Unavailable Interrupt */
+ START_EXCEPTION(ap_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+ EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .unknown_exception
+ b .ret_from_except
+
+/* Debug exception as a critical interrupt*/
+ START_EXCEPTION(debug_crit);
+ CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+ /*
+ * If there is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the CSRR1 value and clearing the debug status.
+ */
+
+ mfspr r14,SPRN_DBSR /* check single-step/branch taken */
+ andis. r15,r14,DBSR_IC@h
+ beq+ 1f
+
+ LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+ LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ cmpld cr0,r10,r14
+ cmpld cr1,r10,r15
+ blt+ cr0,1f
+ bge+ cr1,1f
+
+ /* here it looks like we got an inappropriate debug exception. */
+ lis r14,DBSR_IC@h /* clear the IC event */
+ rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */
+ mtspr SPRN_DBSR,r14
+ mtspr SPRN_CSRR1,r11
+ lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */
+ ld r1,PACA_EXCRIT+EX_R1(r13)
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ mtcr r10
+ ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */
+ ld r11,PACA_EXCRIT+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_CRIT_SCRATCH
+ rfci
+
+ /* Normal debug exception */
+ /* XXX We only handle coming from userspace for now since we can't
+ * quite save properly an interrupted kernel state yet
+ */
+1: andi. r14,r11,MSR_PR; /* check for userspace again */
+ beq kernel_dbg_exc; /* if from kernel mode */
+
+ /* Now we mash up things to make it look like we are coming on a
+ * normal exception
+ */
+ mfspr r15,SPRN_SPRG_CRIT_SCRATCH
+ mtspr SPRN_SPRG_GEN_SCRATCH,r15
+ mfspr r14,SPRN_DBSR
+ EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ bl .save_nvgprs
+ bl .DebugException
+ b .ret_from_except
+
+kernel_dbg_exc:
+ b . /* NYI */
+
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt_book3e:
+ mtcr r10
+ stb r11,PACAHARDIRQEN(r13)
+ mfspr r10,SPRN_SRR1
+ rldicl r11,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r11,16
+ mtspr SPRN_SRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */
+ ld r11,PACA_EXGEN+EX_R11(r13);
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH;
+ rfi
+ b .
+
+/*
+ * This is called from 0x300 and 0x400 handlers after the prologs with
+ * r14 and r15 containing the fault address and error code, with the
+ * original values stashed away in the PACA
+ */
+storage_fault_common:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ mr r5,r15
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ INTS_RESTORE_HARD
+ bl .do_page_fault
+ cmpdi r3,0
+ bne- 1f
+ b .ret_from_except_lite
+1: bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+/*
+ * Alignment exception doesn't fit entirely in the 0x100 bytes so it
+ * continues here.
+ */
+alignment_more:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .alignment_exception
+ b .ret_from_except
+
+/*
+ * We branch here from entry_64.S for the last stage of the exception
+ * return code path. MSR:EE is expected to be off at that point
+ */
+_GLOBAL(exception_return_book3e)
+ b 1f
+
+/* This is the return from load_up_fpu fast path which could do with
+ * less GPR restores in fact, but for now we have a single return path
+ */
+ .globl fast_exception_return
+fast_exception_return:
+ wrteei 0
+1: mr r0,r13
+ ld r10,_MSR(r1)
+ REST_4GPRS(2, r1)
+ andi. r6,r10,MSR_PR
+ REST_2GPRS(6, r1)
+ beq 1f
+ ACCOUNT_CPU_USER_EXIT(r10, r11)
+ ld r0,GPR13(r1)
+
+1: stdcx. r0,0,r1 /* to clear the reservation */
+
+ ld r8,_CCR(r1)
+ ld r9,_LINK(r1)
+ ld r10,_CTR(r1)
+ ld r11,_XER(r1)
+ mtcr r8
+ mtlr r9
+ mtctr r10
+ mtxer r11
+ REST_2GPRS(8, r1)
+ ld r10,GPR10(r1)
+ ld r11,GPR11(r1)
+ ld r12,GPR12(r1)
+ mtspr SPRN_SPRG_GEN_SCRATCH,r0
+
+ std r10,PACA_EXGEN+EX_R10(r13);
+ std r11,PACA_EXGEN+EX_R11(r13);
+ ld r10,_NIP(r1)
+ ld r11,_MSR(r1)
+ ld r0,GPR0(r1)
+ ld r1,GPR1(r1)
+ mtspr SPRN_SRR0,r10
+ mtspr SPRN_SRR1,r11
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH
+ rfi
+
+/*
+ * Trampolines used when spotting a bad kernel stack pointer in
+ * the exception entry code.
+ *
+ * TODO: move some bits like SRR0 read to trampoline, pass PACA
+ * index around, etc... to handle crit & mcheck
+ */
+BAD_STACK_TRAMPOLINE(0x000)
+BAD_STACK_TRAMPOLINE(0x100)
+BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x400)
+BAD_STACK_TRAMPOLINE(0x500)
+BAD_STACK_TRAMPOLINE(0x600)
+BAD_STACK_TRAMPOLINE(0x700)
+BAD_STACK_TRAMPOLINE(0x800)
+BAD_STACK_TRAMPOLINE(0x900)
+BAD_STACK_TRAMPOLINE(0x980)
+BAD_STACK_TRAMPOLINE(0x9f0)
+BAD_STACK_TRAMPOLINE(0xa00)
+BAD_STACK_TRAMPOLINE(0xb00)
+BAD_STACK_TRAMPOLINE(0xc00)
+BAD_STACK_TRAMPOLINE(0xd00)
+BAD_STACK_TRAMPOLINE(0xe00)
+BAD_STACK_TRAMPOLINE(0xf00)
+BAD_STACK_TRAMPOLINE(0xf20)
+
+ .globl bad_stack_book3e
+bad_stack_book3e:
+ /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
+ mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r10,_NIP(r1)
+ std r11,_MSR(r1)
+ ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
+ lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
+ std r10,GPR1(r1)
+ std r11,_CCR(r1)
+ mfspr r10,SPRN_DEAR
+ mfspr r11,SPRN_ESR
+ std r10,_DAR(r1)
+ std r11,_DSISR(r1)
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \
+ ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_10GPRS(14,r1)
+ SAVE_8GPRS(24,r1)
+ lhz r12,PACA_TRAP_SAVE(r13)
+ std r12,_TRAP(r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Setup the initial TLB for a core. This current implementation
+ * assume that whatever we are running off will not conflict with
+ * the new mapping at PAGE_OFFSET.
+ */
+_GLOBAL(initial_tlb_book3e)
+
+ /* Look for the first TLB with IPROT set */
+ mfspr r4,SPRN_TLB0CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(0)@h
+ bne found_iprot
+
+ mfspr r4,SPRN_TLB1CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(1)@h
+ bne found_iprot
+
+ mfspr r4,SPRN_TLB2CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(2)@h
+ bne found_iprot
+
+ lis r3,MAS0_TLBSEL(3)@h
+ mfspr r4,SPRN_TLB3CFG
+ /* fall through */
+
+found_iprot:
+ andi. r5,r4,TLBnCFG_HES
+ bne have_hes
+
+ mflr r8 /* save LR */
+/* 1. Find the index of the entry we're executing in
+ *
+ * r3 = MAS0_TLBSEL (for the iprot array)
+ * r4 = SPRN_TLBnCFG
+ */
+ bl invstr /* Find our address */
+invstr: mflr r6 /* Make it accessible */
+ mfmsr r7
+ rlwinm r5,r7,27,31,31 /* extract MSR[IS] */
+ mfspr r7,SPRN_PID
+ slwi r7,r7,16
+ or r7,r7,r5
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID */
+
+ mfspr r3,SPRN_MAS0
+ rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */
+
+ mfspr r7,SPRN_MAS1 /* Insure IPROT set */
+ oris r7,r7,MAS1_IPROT@h
+ mtspr SPRN_MAS1,r7
+ tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r4 = SPRN_TLBnCFG
+ * r5 = ESEL of entry we are running in
+ */
+ andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */
+ li r6,0 /* Set Entry counter to 0 */
+1: mr r7,r3 /* Set MAS0(TLBSEL) */
+ rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r7,SPRN_MAS1
+ rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
+ cmpw r5,r6
+ beq skpinv /* Dont update the current execution TLB */
+ mtspr SPRN_MAS1,r7
+ tlbwe
+ isync
+skpinv: addi r6,r6,1 /* Increment */
+ cmpw r6,r4 /* Are we done? */
+ bne 1b /* If not, repeat */
+
+ /* Invalidate all TLBs */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+/* 3. Setup a temp mapping and jump to it
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r5 = ESEL of entry we are running in
+ */
+ andi. r7,r5,0x1 /* Find an entry not used and is non-zero */
+ addi r7,r7,0x1
+ mr r4,r3 /* Set MAS0(TLBSEL) = 1 */
+ mtspr SPRN_MAS0,r4
+ tlbre
+
+ rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */
+ mtspr SPRN_MAS0,r4
+
+ mfspr r7,SPRN_MAS1
+ xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */
+ mtspr SPRN_MAS1,r6
+
+ tlbwe
+
+ mfmsr r6
+ xori r6,r6,MSR_IS
+ mtspr SPRN_SRR1,r6
+ bl 1f /* Find our address */
+1: mflr r6
+ addi r6,r6,(2f - 1b)
+ mtspr SPRN_SRR0,r6
+ rfi
+2:
+
+/* 4. Clear out PIDs & Search info
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ li r6,0
+ mtspr SPRN_MAS6,r6
+ mtspr SPRN_PID,r6
+
+/* 5. Invalidate mapping we started in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ mtspr SPRN_MAS0,r3
+ tlbre
+ mfspr r6,SPRN_MAS1
+ rlwinm r6,r6,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r6
+ tlbwe
+
+ /* Invalidate TLB1 */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
+/* 6. Setup KERNELBASE mapping in TLB[0]
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ rlwinm r3,r3,0,16,3 /* clear ESEL */
+ mtspr SPRN_MAS0,r3
+ lis r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+ mtspr SPRN_MAS1,r6
+
+ LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
+ mtspr SPRN_MAS2,r6
+
+ rlwinm r5,r5,0,0,25
+ ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
+ mtspr SPRN_MAS3,r5
+ li r5,-1
+ rlwinm r5,r5,0,0,25
+
+ tlbwe
+
+/* 7. Jump to KERNELBASE mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ */
+ /* Now we branch the new virtual address mapped by this entry */
+ LOAD_REG_IMMEDIATE(r6,2f)
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
+ mtspr SPRN_SRR0,r6
+ mtspr SPRN_SRR1,r7
+ rfi /* start execution out of TLB1[0] entry */
+2:
+
+/* 8. Clear out the temp mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ */
+ mtspr SPRN_MAS0,r4
+ tlbre
+ mfspr r5,SPRN_MAS1
+ rlwinm r5,r5,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r5
+ tlbwe
+
+ /* Invalidate TLB1 */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+ /* We translate LR and return */
+ tovirt(r8,r8)
+ mtlr r8
+ blr
+
+have_hes:
+ /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
+ * kernel linear mapping. We also set MAS8 once for all here though
+ * that will have to be made dependent on whether we are running under
+ * a hypervisor I suppose.
+ */
+ ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
+ mtspr SPRN_MAS0,r3
+ lis r3,(MAS1_VALID | MAS1_IPROT)@h
+ ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
+ mtspr SPRN_MAS1,r3
+ LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
+ mtspr SPRN_MAS2,r3
+ li r3,MAS3_SR | MAS3_SW | MAS3_SX
+ mtspr SPRN_MAS7_MAS3,r3
+ li r3,0
+ mtspr SPRN_MAS8,r3
+
+ /* Write the TLB entry */
+ tlbwe
+
+ /* Now we branch the new virtual address mapped by this entry */
+ LOAD_REG_IMMEDIATE(r3,1f)
+ mtctr r3
+ bctr
+
+1: /* We are now running at PAGE_OFFSET, clean the TLB of everything
+ * else (XXX we should scan for bolted crap from the firmware too)
+ */
+ PPC_TLBILX(0,0,0)
+ sync
+ isync
+
+ /* We translate LR and return */
+ mflr r3
+ tovirt(r3,r3)
+ mtlr r3
+ blr
+
+/*
+ * Main entry (boot CPU, thread 0)
+ *
+ * We enter here from head_64.S, possibly after the prom_init trampoline
+ * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
+ * mode. Anything else is as it was left by the bootloader
+ *
+ * Initial requirements of this port:
+ *
+ * - Kernel loaded at 0 physical
+ * - A good lump of memory mapped 0:0 by UTLB entry 0
+ * - MSR:IS & MSR:DS set to 0
+ *
+ * Note that some of the above requirements will be relaxed in the future
+ * as the kernel becomes smarter at dealing with different initial conditions
+ * but for now you have to be careful
+ */
+_GLOBAL(start_initialization_book3e)
+ mflr r28
+
+ /* First, we need to setup some initial TLBs to map the kernel
+ * text, data and bss at PAGE_OFFSET. We don't have a real mode
+ * and always use AS 0, so we just set it up to match our link
+ * address and never use 0 based addresses.
+ */
+ bl .initial_tlb_book3e
+
+ /* Init global core bits */
+ bl .init_core_book3e
+
+ /* Init per-thread bits */
+ bl .init_thread_book3e
+
+ /* Return to common init code */
+ tovirt(r28,r28)
+ mtlr r28
+ blr
+
+
+/*
+ * Secondary core/processor entry
+ *
+ * This is entered for thread 0 of a secondary core, all other threads
+ * are expected to be stopped. It's similar to start_initialization_book3e
+ * except that it's generally entered from the holding loop in head_64.S
+ * after CPUs have been gathered by Open Firmware.
+ *
+ * We assume we are in 32 bits mode running with whatever TLB entry was
+ * set for us by the firmware or POR engine.
+ */
+_GLOBAL(book3e_secondary_core_init_tlb_set)
+ li r4,1
+ b .generic_secondary_smp_init
+
+_GLOBAL(book3e_secondary_core_init)
+ mflr r28
+
+ /* Do we need to setup initial TLB entry ? */
+ cmplwi r4,0
+ bne 2f
+
+ /* Setup TLB for this core */
+ bl .initial_tlb_book3e
+
+ /* We can return from the above running at a different
+ * address, so recalculate r2 (TOC)
+ */
+ bl .relative_toc
+
+ /* Init global core bits */
+2: bl .init_core_book3e
+
+ /* Init per-thread bits */
+3: bl .init_thread_book3e
+
+ /* Return to common init code at proper virtual address.
+ *
+ * Due to various previous assumptions, we know we entered this
+ * function at either the final PAGE_OFFSET mapping or using a
+ * 1:1 mapping at 0, so we don't bother doing a complicated check
+ * here, we just ensure the return address has the right top bits.
+ *
+ * Note that if we ever want to be smarter about where we can be
+ * started from, we have to be careful that by the time we reach
+ * the code below we may already be running at a different location
+ * than the one we were called from since initial_tlb_book3e can
+ * have moved us already.
+ */
+ cmpdi cr0,r28,0
+ blt 1f
+ lis r3,PAGE_OFFSET@highest
+ sldi r3,r3,32
+ or r28,r28,r3
+1: mtlr r28
+ blr
+
+_GLOBAL(book3e_secondary_thread_init)
+ mflr r28
+ b 3b
+
+_STATIC(init_core_book3e)
+ /* Establish the interrupt vector base */
+ LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+ mtspr SPRN_IVPR,r3
+ sync
+ blr
+
+_STATIC(init_thread_book3e)
+ lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
+ mtspr SPRN_EPCR,r3
+
+ /* Make sure interrupts are off */
+ wrteei 0
+
+ /* disable all timers and clear out status */
+ li r3,0
+ mtspr SPRN_TCR,r3
+ mfspr r3,SPRN_TSR
+ mtspr SPRN_TSR,r3
+
+ blr
+
+_GLOBAL(__setup_base_ivors)
+ SET_IVOR(0, 0x020) /* Critical Input */
+ SET_IVOR(1, 0x000) /* Machine Check */
+ SET_IVOR(2, 0x060) /* Data Storage */
+ SET_IVOR(3, 0x080) /* Instruction Storage */
+ SET_IVOR(4, 0x0a0) /* External Input */
+ SET_IVOR(5, 0x0c0) /* Alignment */
+ SET_IVOR(6, 0x0e0) /* Program */
+ SET_IVOR(7, 0x100) /* FP Unavailable */
+ SET_IVOR(8, 0x120) /* System Call */
+ SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
+ SET_IVOR(10, 0x160) /* Decrementer */
+ SET_IVOR(11, 0x180) /* Fixed Interval Timer */
+ SET_IVOR(12, 0x1a0) /* Watchdog Timer */
+ SET_IVOR(13, 0x1c0) /* Data TLB Error */
+ SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+ SET_IVOR(15, 0x040) /* Debug */
+
+ sync
+
+ blr
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8ac85e08ffae..1808876edcc9 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -12,6 +12,8 @@
*
*/
+#include <asm/exception-64s.h>
+
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
@@ -22,18 +24,6 @@
* 0x8000 - : Early init and support code
*/
-
-/*
- * SPRG Usage
- *
- * Register Definition
- *
- * SPRG0 reserved for hypervisor
- * SPRG1 temp - used to save gpr
- * SPRG2 temp - used to save gpr
- * SPRG3 virt addr of paca
- */
-
/*
* This is the start of the interrupt handlers for pSeries
* This code runs with relocation off.
@@ -51,34 +41,44 @@ __start_interrupts:
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
+ mtspr SPRN_SPRG_SCRATCH0,r13
BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
+ mfspr r13,SPRN_SPRG_PACA
+ std r9,PACA_EXSLB+EX_R9(r13)
+ std r10,PACA_EXSLB+EX_R10(r13)
+ mfspr r10,SPRN_DAR
+ mfspr r9,SPRN_DSISR
+ srdi r10,r10,60
+ rlwimi r10,r9,16,0x20
+ mfcr r9
+ cmpwi r10,0x2c
beq do_stab_bolted_pSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r12,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R13(r13)
+ EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+FTR_SECTION_ELSE
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
. = 0x380
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -91,7 +91,7 @@ data_access_slb_pSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -115,8 +115,8 @@ data_access_slb_pSeries:
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -129,7 +129,7 @@ instruction_access_slb_pSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -159,7 +159,7 @@ BEGIN_FTR_SECTION
beq- 1f
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
mr r9,r13
- mfspr r13,SPRN_SPRG3
+ mfspr r13,SPRN_SPRG_PACA
mfspr r11,SPRN_SRR0
ld r12,PACAKBASE(r13)
ld r10,PACAKMSR(r13)
@@ -228,15 +228,17 @@ masked_interrupt:
rotldi r10,r10,16
mtspr SPRN_SRR1,r10
ld r10,PACA_EXGEN+EX_R10(r13)
- mfspr r13,SPRN_SPRG1
+ mfspr r13,SPRN_SPRG_SCRATCH0
rfid
b .
.align 7
do_stab_bolted_pSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXSLB+EX_R13(r13)
+ EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
#ifdef CONFIG_PPC_PSERIES
/*
@@ -246,14 +248,14 @@ do_stab_bolted_pSeries:
.align 7
system_reset_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
.align 7
machine_check_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
#endif /* CONFIG_PPC_PSERIES */
@@ -268,7 +270,7 @@ slb_miss_user_pseries:
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
+ mfspr r10,SPRG_SCRATCH0
ld r11,PACA_EXSLB+EX_R9(r13)
ld r12,PACA_EXSLB+EX_R3(r13)
std r10,PACA_EXGEN+EX_R13(r13)
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 2436df33c6f4..fc8f5b14019c 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif /* CONFIG_SMP */
/* enable use of FP after return */
#ifdef CONFIG_PPC32
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
lwz r4,THREAD_FPEXC_MODE(r5)
ori r9,r9,MSR_FP /* enable FP for current */
or r9,r9,r4
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index fc2132942754..829c3fe7c5a2 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -244,8 +244,8 @@ __secondary_hold_acknowledge:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; \
- mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
@@ -255,7 +255,7 @@ __secondary_hold_acknowledge:
andi. r11,r11,MSR_PR; \
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
- mfspr r11,SPRN_SPRG3; \
+ mfspr r11,SPRN_SPRG_THREAD; \
lwz r11,THREAD_INFO-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
@@ -267,9 +267,9 @@ __secondary_hold_acknowledge:
stw r10,_CCR(r11); /* save registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
@@ -355,11 +355,11 @@ i##n: \
* -- paulus.
*/
. = 0x200
- mtspr SPRN_SPRG0,r10
- mtspr SPRN_SPRG1,r11
+ mtspr SPRN_SPRG_SCRATCH0,r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
mfcr r10
#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
+ mfspr r11,SPRN_SPRG_RTAS
cmpwi 0,r11,0
bne 7f
#endif /* CONFIG_PPC_CHRP */
@@ -367,7 +367,7 @@ i##n: \
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
+ mfspr r4,SPRN_SPRG_RTAS
cmpwi cr1,r4,0
bne cr1,1f
#endif
@@ -485,7 +485,7 @@ InstructionTLBMiss:
mfspr r3,SPRN_IMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -559,7 +559,7 @@ DataLoadTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtcrf 0x80,r2
BEGIN_MMU_FTR_SECTION
li r0,1
- mfspr r1,SPRN_SPRG4
+ mfspr r1,SPRN_SPRG_603_LRU
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
slw r0,r0,r2
xor r1,r0,r1
srw r0,r1,r2
- mtspr SPRN_SPRG4,r1
+ mtspr SPRN_SPRG_603_LRU,r1
mfspr r2,SPRN_SRR1
rlwimi r2,r0,31-14,14,14
mtspr SPRN_SRR1,r2
@@ -643,7 +643,7 @@ DataStoreTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
lwz r2,PGDIR(r2)
bge- 112f
@@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtcrf 0x80,r2
BEGIN_MMU_FTR_SECTION
li r0,1
- mfspr r1,SPRN_SPRG4
+ mfspr r1,SPRN_SPRG_603_LRU
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
slw r0,r0,r2
xor r1,r0,r1
srw r0,r1,r2
- mtspr SPRN_SPRG4,r1
+ mtspr SPRN_SPRG_603_LRU,r1
mfspr r2,SPRN_SRR1
rlwimi r2,r0,31-14,14,14
mtspr SPRN_SRR1,r2
@@ -864,9 +864,9 @@ __secondary_start:
tophys(r4,r2)
addi r4,r4,THREAD /* phys address of our thread_struct */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* enable MMU and jump to start_secondary */
li r4,MSR_KERNEL
@@ -947,9 +947,9 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* stack */
lis r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 0c96911d4299..a90625f9b485 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit)
/*
* Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
+ * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
+ * the physical address of the current task thread_struct.
* Note that we have to have decremented r1 before we write to any fields
* of the exception frame, since a critical interrupt could occur at any
* time, and it will write to the area immediately below the current r1.
*/
#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG2,r1; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
+ mtspr SPRN_SPRG_SCRATCH2,r1; \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
beq 1f; \
- mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
addi r1,r1,THREAD_SIZE; \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
@@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit)
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
- mfspr r10,SPRN_SPRG2; \
+ mfspr r10,SPRN_SPRG_SCRATCH2; \
mfspr r12,SPRN_SRR0; \
stw r10,GPR1(r11); \
mfspr r9,SPRN_SRR1; \
@@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit)
lwz r11,critirq_ctx@l(r11); \
beq 1f; \
/* COMING FROM USER MODE */ \
- mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
tophys(r11,r11); \
@@ -265,8 +265,8 @@ label:
* and exit. Otherwise, we call heavywight functions to do the work.
*/
START_EXCEPTION(0x0300, DataStorage)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -275,12 +275,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
/* First, check if it was a zone fault (which means a user
@@ -308,7 +308,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -355,15 +355,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
@@ -380,15 +380,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b DataAccess
/*
@@ -466,8 +466,8 @@ label:
* load TLB entries from the page table if they exist.
*/
START_EXCEPTION(0x1100, DTLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -476,12 +476,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
mfspr r10, SPRN_DEAR /* Get faulting address */
@@ -500,7 +500,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -550,15 +550,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b DataAccess
/* 0x1200 - Instruction TLB Miss Exception
@@ -566,8 +566,8 @@ label:
* registers and bailout to a different point.
*/
START_EXCEPTION(0x1200, ITLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -576,12 +576,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
mfspr r10, SPRN_SRR0 /* Get faulting address */
@@ -600,7 +600,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -650,15 +650,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b InstructionAccess
EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
@@ -803,15 +803,15 @@ finish_tlb_load:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
@@ -835,7 +835,7 @@ start_here:
/* ptr to phys current thread */
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 18d8a1677c4d..711368b993f2 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -239,7 +239,7 @@ skpinv: addi r4,r4,1 /* Increment */
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@h
@@ -350,12 +350,12 @@ interrupt_base:
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -374,7 +374,7 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
@@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b DataStorage
/* Instruction TLB Error Interrupt */
@@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D:
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
@@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D:
mtspr SPRN_MMUCR,r12
/* Make up the required permissions */
- li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
/* Compute pgdir/pmd offset */
rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
@@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b InstructionStorage
/* Debug Interrupt */
@@ -593,12 +593,12 @@ finish_tlb_load:
/* Done...restore registers and get out of here.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
rfi /* Force context change */
/*
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 012505ebd9f9..c38afdb45d7b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,7 +36,6 @@
#include <asm/thread_info.h>
#include <asm/firmware.h>
#include <asm/page_64.h>
-#include <asm/exception.h>
#include <asm/irqflags.h>
/* The physical memory is layed out such that the secondary processor
@@ -122,10 +121,11 @@ __run_at_load:
*/
.globl __secondary_hold
__secondary_hold:
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
-
+#endif
/* Grab our physical cpu number */
mr r24,r3
@@ -144,6 +144,7 @@ __secondary_hold:
ld r4,0(r4) /* deref function descriptor */
mtctr r4
mr r3,r24
+ li r4,0
bctr
#else
BUG_OPCODE
@@ -164,21 +165,49 @@ exception_marker:
#include "exceptions-64s.S"
#endif
+_GLOBAL(generic_secondary_thread_init)
+ mr r24,r3
+
+ /* turn on 64-bit mode */
+ bl .enable_64b_mode
+
+ /* get a valid TOC pointer, wherever we're mapped at */
+ bl .relative_toc
+
+#ifdef CONFIG_PPC_BOOK3E
+ /* Book3E initialization */
+ mr r3,r24
+ bl .book3e_secondary_thread_init
+#endif
+ b generic_secondary_common_init
/*
* On pSeries and most other platforms, secondary processors spin
* in the following code.
* At entry, r3 = this processor's number (physical cpu id)
+ *
+ * On Book3E, r4 = 1 to indicate that the initial TLB entry for
+ * this core already exists (setup via some other mechanism such
+ * as SCOM before entry).
*/
_GLOBAL(generic_secondary_smp_init)
mr r24,r3
-
+ mr r25,r4
+
/* turn on 64-bit mode */
bl .enable_64b_mode
- /* get the TOC pointer (real address) */
+ /* get a valid TOC pointer, wherever we're mapped at */
bl .relative_toc
+#ifdef CONFIG_PPC_BOOK3E
+ /* Book3E initialization */
+ mr r3,r24
+ mr r4,r25
+ bl .book3e_secondary_core_init
+#endif
+
+generic_secondary_common_init:
/* Set up a paca value for this processor. Since we have the
* physical cpu id in r24, we need to search the pacas to find
* which logical id maps to our physical one.
@@ -196,7 +225,12 @@ _GLOBAL(generic_secondary_smp_init)
mr r3,r24 /* not found, copy phys to r3 */
b .kexec_wait /* next kernel might do better */
-2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */
+#ifdef CONFIG_PPC_BOOK3E
+ addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */
+ mtspr SPRN_SPRG_TLB_EXFRAME,r12
+#endif
+
/* From now on, r24 is expected to be logical cpuid */
mr r24,r5
3: HMT_LOW
@@ -232,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init)
* Turn the MMU off.
* Assumes we're mapped EA == RA if the MMU is on.
*/
+#ifdef CONFIG_PPC_BOOK3S
_STATIC(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
@@ -243,6 +278,7 @@ _STATIC(__mmu_off)
sync
rfid
b . /* prevent speculative execution */
+#endif
/*
@@ -280,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform)
mr r31,r3
mr r30,r4
+#ifdef CONFIG_PPC_BOOK3E
+ bl .start_initialization_book3e
+ b .__after_prom_start
+#else
/* Setup some critical 970 SPRs before switching MMU off */
mfspr r0,SPRN_PVR
srwi r0,r0,16
@@ -297,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform)
/* Switch off MMU if not already off */
bl .__mmu_off
b .__after_prom_start
+#endif /* CONFIG_PPC_BOOK3E */
_INIT_STATIC(__boot_from_prom)
#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
@@ -359,10 +400,16 @@ _STATIC(__after_prom_start)
* Note: This process overwrites the OF exception vectors.
*/
li r3,0 /* target addr */
+#ifdef CONFIG_PPC_BOOK3E
+ tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */
+#endif
mr. r4,r26 /* In some cases the loader may */
beq 9f /* have already put us at zero */
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
+#ifdef CONFIG_PPC_BOOK3E
+ tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
+#endif
#ifdef CONFIG_CRASH_DUMP
/*
@@ -485,7 +532,7 @@ _GLOBAL(pmac_secondary_start)
LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */
mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r4 /* for this processor. */
- mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+ mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/
/* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
@@ -503,11 +550,14 @@ _GLOBAL(pmac_secondary_start)
* 1. Processor number
* 2. Segment table pointer (virtual address)
* On entry the following are set:
- * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
- * r24 = cpu# (in Linux terms)
- * r13 = paca virtual address
- * SPRG3 = paca virtual address
+ * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
+ * r24 = cpu# (in Linux terms)
+ * r13 = paca virtual address
+ * SPRG_PACA = paca virtual address
*/
+ .section ".text";
+ .align 2 ;
+
.globl __secondary_start
__secondary_start:
/* Set thread priority to MEDIUM */
@@ -544,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
- rfid
+ RFI
b . /* prevent speculative execution */
/*
@@ -565,11 +615,16 @@ _GLOBAL(start_secondary_prolog)
*/
_GLOBAL(enable_64b_mode)
mfmsr r11 /* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3E
+ oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
+ mtmsr r11
+#else /* CONFIG_PPC_BOOK3E */
li r12,(MSR_SF | MSR_ISF)@highest
sldi r12,r12,48
or r11,r11,r12
mtmsrd r11
isync
+#endif
blr
/*
@@ -613,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform)
bdnz 3b
4:
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r6
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
+#endif
#ifdef CONFIG_RELOCATABLE
/* Save the physical address we're running at in kernstart_addr */
@@ -642,13 +699,13 @@ _INIT_STATIC(start_here_multiplatform)
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
- bl .early_setup /* also sets r13 and SPRG3 */
+ bl .early_setup /* also sets r13 and SPRG_PACA */
LOAD_REG_ADDR(r3, .start_here_common)
ld r4,PACAKMSR(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
- rfid
+ RFI
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 52ff8c53b93c..6ded19d01891 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -110,8 +110,8 @@ turn_on_mmu:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; \
- mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
@@ -121,7 +121,7 @@ turn_on_mmu:
andi. r11,r11,MSR_PR; \
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
- mfspr r11,SPRN_SPRG3; \
+ mfspr r11,SPRN_SPRG_THREAD; \
lwz r11,THREAD_INFO-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
@@ -133,9 +133,9 @@ turn_on_mmu:
stw r10,_CCR(r11); /* save registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
@@ -603,8 +603,9 @@ start_here:
/* ptr to phys current thread */
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
+ /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
/* stack */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 5f9febc8d143..50504ae39cb7 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -20,14 +20,14 @@
#endif
#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG4W,r1; \
+ mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\
+ mtspr SPRN_SPRG_WSCRATCH1,r11; \
+ mtspr SPRN_SPRG_WSCRATCH2,r1; \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
beq 1f; \
- mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
ALLOC_STACK_FRAME(r1, THREAD_SIZE); \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
@@ -35,13 +35,13 @@
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_RSCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_RSCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
- mfspr r10,SPRN_SPRG4R; \
+ mfspr r10,SPRN_SPRG_RSCRATCH2; \
mfspr r12,SPRN_SRR0; \
stw r10,GPR1(r11); \
mfspr r9,SPRN_SRR1; \
@@ -69,21 +69,11 @@
* providing configurations that micro-optimize space usage.
*/
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG SPRN_SPRG6W
-
-#define MCHECK_STACK_BASE mcheckirq_ctx
+#define MC_STACK_BASE mcheckirq_ctx
#define CRIT_STACK_BASE critirq_ctx
/* only on e500mc/e200 */
-#define DEBUG_STACK_BASE dbgirq_ctx
-#ifdef CONFIG_E200
-#define DEBUG_SPRG SPRN_SPRG6W
-#else
-#define DEBUG_SPRG SPRN_SPRG9
-#endif
+#define DBG_STACK_BASE dbgirq_ctx
#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
@@ -110,7 +100,7 @@
* critical/machine check exception stack at low physical addresses.
*/
#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
- mtspr exc_level##_SPRG,r8; \
+ mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
stw r9,GPR9(r8); /* save various registers */\
mfcr r9; /* save CR in r9 for now */\
@@ -119,7 +109,7 @@
stw r9,_CCR(r8); /* save CR on stack */\
mfspr r10,exc_level_srr1; /* check whether user or kernel */\
andi. r10,r10,MSR_PR; \
- mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
beq 1f; \
@@ -140,7 +130,7 @@
lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
mr r11,r8; \
-2: mfspr r8,exc_level##_SPRG; \
+2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
stw r12,GPR12(r11); /* save various registers */\
mflr r10; \
stw r10,_LINK(r11); \
@@ -161,9 +151,9 @@
#define CRITICAL_EXCEPTION_PROLOG \
EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
#define DEBUG_EXCEPTION_PROLOG \
- EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
+ EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1)
#define MCHECK_EXCEPTION_PROLOG \
- EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
+ EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1)
/*
* Exception vectors.
@@ -282,13 +272,13 @@ label:
mtspr SPRN_DSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
- mtspr DEBUG_SPRG,r8; \
- BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
+ mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
+ BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
- mfspr r8,DEBUG_SPRG; \
+ mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
\
- PPC_RFDI; \
+ PPC_RFDI; \
b .; \
\
/* continue normal handling for a debug exception... */ \
@@ -335,11 +325,11 @@ label:
mtspr SPRN_CSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
- mtspr CRIT_SPRG,r8; \
+ mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
- mfspr r8,CRIT_SPRG; \
+ mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
\
rfci; \
b .; \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 5bdcc06d294c..975788ca05d2 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -361,7 +361,7 @@ skpinv: addi r6,r6,1 /* Increment */
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@h
@@ -532,12 +532,12 @@ interrupt_base:
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -557,7 +557,7 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
@@ -575,7 +575,12 @@ interrupt_base:
* place or can we save a couple of instructions here ?
*/
mfspr r12,SPRN_ESR
+#ifdef CONFIG_PTE_64BIT
+ li r13,_PAGE_PRESENT
+ oris r13,r13,_PAGE_ACCESSED@h
+#else
li r13,_PAGE_PRESENT|_PAGE_ACCESSED
+#endif
rlwimi r13,r12,11,29,29
FIND_PTE
@@ -598,12 +603,12 @@ interrupt_base:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b DataStorage
/* Instruction TLB Error Interrupt */
@@ -613,12 +618,12 @@ interrupt_base:
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -638,12 +643,17 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
/* Make up the required permissions */
- li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+#ifdef CONFIG_PTE_64BIT
+ li r13,_PAGE_PRESENT | _PAGE_EXEC
+ oris r13,r13,_PAGE_ACCESSED@h
+#else
+ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
FIND_PTE
andc. r13,r13,r11 /* Check permission */
@@ -666,12 +676,12 @@ interrupt_base:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b InstructionStorage
#ifdef CONFIG_SPE
@@ -733,7 +743,7 @@ finish_tlb_load:
mfspr r12, SPRN_MAS2
#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
+ rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
#else
rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
#endif
@@ -742,23 +752,27 @@ finish_tlb_load:
#endif
mtspr SPRN_MAS2, r12
- li r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
- rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
- and r12, r11, r10
- andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
- slwi r10, r12, 1
- or r10, r10, r12
- iseleq r12, r12, r10
-
#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
- rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
+ rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */
+ andi. r10, r11, _PAGE_DIRTY
+ bne 1f
+ li r10, MAS3_SW | MAS3_UW
+ andc r12, r12, r10
+1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */
+ rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */
mtspr SPRN_MAS3, r12
BEGIN_MMU_FTR_SECTION
- srwi r10, r13, 8 /* grab RPN[8:31] */
+ srwi r10, r13, 12 /* grab RPN[12:31] */
mtspr SPRN_MAS7, r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
+ li r10, (_PAGE_EXEC | _PAGE_PRESENT)
+ rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
+ and r12, r11, r10
+ andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
+ slwi r10, r12, 1
+ or r10, r10, r12
+ iseleq r12, r12, r10
rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
mtspr SPRN_MAS3, r11
#endif
@@ -790,12 +804,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
tlbwe
/* Done...restore registers and get out of here. */
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
rfi /* Force context change */
#ifdef CONFIG_SPE
@@ -839,7 +853,7 @@ load_up_spe:
#endif /* !CONFIG_SMP */
/* enable use of SPE after return */
oris r9,r9,MSR_SPE@h
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
li r4,1
li r10,THREAD_ACC
stw r4,THREAD_USED_SPE(r5)
@@ -1118,7 +1132,7 @@ __secondary_start:
/* ptr to current thread */
addi r4,r2,THREAD /* address of our thread_struct */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* Setup the defaults for TLB entries */
li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 6e3f62493659..a4c8b38b0ba1 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask)
return 1;
}
-static struct dma_mapping_ops ibmebus_dma_ops = {
+static struct dma_map_ops ibmebus_dma_ops = {
.alloc_coherent = ibmebus_alloc_coherent,
.free_coherent = ibmebus_free_coherent,
.map_sg = ibmebus_map_sg,
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 2419cc706ff1..ed0ac4e4b8d8 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -35,6 +35,7 @@
#include <asm/prom.h>
#include <asm/vdso_datapage.h>
#include <asm/vio.h>
+#include <asm/mmu.h>
#define MODULE_VERS "1.8"
#define MODULE_NAME "lparcfg"
@@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc);
+ seq_printf(m, "slb_size=%d\n", mmu_slb_size);
+
return 0;
}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 15f28e0de78d..da9c0c4c10f3 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
addi r3,r3,L1_CACHE_BYTES
bdnz 1b
sync /* wait for dcbst's to get to ram */
+#ifndef CONFIG_44x
mtctr r4
2: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 2b
+#else
+ /* Flash invalidate on 44x because we are passed kmapped addresses and
+ this doesn't work for userspace pages due to the virtually tagged
+ icache. Sigh. */
+ iccci 0, r0
+#endif
sync /* additional sync needed on g4 */
isync
blr
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 87df428e3588..1a4fc0d11a03 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
#endif /* CONFIG_EEH */
/* Scan the bus */
- scan_phb(phb);
+ pcibios_scan_phb(phb, dev->node);
if (phb->bus == NULL)
return -ENXIO;
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index e9962c7f8a09..d16b1ea55d44 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -13,6 +13,7 @@
#include <asm/lppaca.h>
#include <asm/paca.h>
#include <asm/sections.h>
+#include <asm/pgtable.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
@@ -87,6 +88,8 @@ void __init initialise_pacas(void)
#ifdef CONFIG_PPC_BOOK3S
new_paca->lppaca_ptr = &lppaca[cpu];
+#else
+ new_paca->kernel_pgd = swapper_pg_dir;
#endif
new_paca->lock_token = 0x8000;
new_paca->paca_index = cpu;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97c5ac0..e9f4840096b3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -50,14 +50,14 @@ resource_size_t isa_mem_base;
unsigned int ppc_pci_flags = 0;
-static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops;
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
{
pci_dma_ops = dma_ops;
}
-struct dma_mapping_ops *get_pci_dma_ops(void)
+struct dma_map_ops *get_pci_dma_ops(void)
{
return pci_dma_ops;
}
@@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_domain_nr);
-#ifdef CONFIG_PPC_OF
-
/* This routine is meant to be used early during boot, when the
* PCI bus numbers have not yet been assigned, and you need to
* issue PCI config cycles to an OF device.
@@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev,
return sprintf(buf, "%s", np->full_name);
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
int pcibios_add_platform_entries(struct pci_dev *pdev)
{
-#ifdef CONFIG_PPC_OF
return device_create_file(&pdev->dev, &dev_attr_devspec);
-#else
- return 0;
-#endif /* CONFIG_PPC_OF */
-
}
char __devinit *pcibios_setup(char *str)
@@ -1626,3 +1618,122 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
}
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type) \
+static int \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
+{ \
+ return PCIBIOS_DEVICE_NOT_FOUND; \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+ .read = null_read_config,
+ .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+ static struct pci_bus bus;
+
+ if (hose == 0) {
+ printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+ }
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose? hose->ops: &null_pci_ops;
+ return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
+ int devfn, int offset, type value) \
+{ \
+ return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
+ devfn, offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+ int cap)
+{
+ return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+ int mode;
+
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "<NO NAME>");
+
+ /* Create an empty bus for the toplevel */
+ bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+ sysdata);
+ if (bus == NULL) {
+ pr_err("Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+ /* Get some IO space for the new PHB */
+ pcibios_setup_phb_io_space(hose);
+
+ /* Wire up PHB bus resources */
+ pcibios_setup_phb_resources(hose);
+
+ /* Get probe mode and perform scan */
+ mode = PCI_PROBE_NORMAL;
+ if (node && ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+ pr_debug(" probe mode: %d\n", mode);
+ if (mode == PCI_PROBE_DEVTREE) {
+ bus->subordinate = hose->last_busno;
+ of_scan_bus(node, bus);
+ }
+
+ if (mode == PCI_PROBE_NORMAL)
+ hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c666ff92..c13668cf36d9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1;
void pcibios_make_OF_bus_map(void);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers. We do this only on
* some pmacs
@@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
-#ifdef CONFIG_PPC_OF
/*
* Functions below are used on OpenFirmware machines.
*/
@@ -357,42 +354,15 @@ pci_create_OF_bus_map(void)
}
}
-#else /* CONFIG_PPC_OF */
-void pcibios_make_OF_bus_map(void)
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
{
-}
-#endif /* CONFIG_PPC_OF */
-
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
-{
- struct pci_bus *bus;
- struct device_node *node = hose->dn;
unsigned long io_offset;
struct resource *res = &hose->io_resource;
- pr_debug("PCI: Scanning PHB %s\n",
- node ? node->full_name : "<NO NAME>");
-
- /* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
- if (bus == NULL) {
- printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
- hose->global_number);
- return;
- }
- bus->secondary = hose->first_busno;
- hose->bus = bus;
-
/* Fixup IO space offset */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
- /* Scan children */
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
@@ -410,7 +380,7 @@ static int __init pcibios_init(void)
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
- pcibios_scan_phb(hose);
+ pcibios_scan_phb(hose, hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
@@ -478,75 +448,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
return result;
}
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type) \
-static int \
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
-{ \
- return PCIBIOS_DEVICE_NOT_FOUND; \
-}
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
- .read = null_read_config,
- .write = null_write_config,
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
- static struct pci_bus bus;
-
- if (hose == 0) {
- hose = pci_bus_to_hose(busnr);
- if (hose == 0)
- printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
- }
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose? hose->ops: &null_pci_ops;
- return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
- int devfn, int offset, type value) \
-{ \
- return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
- devfn, offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
- int cap)
-{
- return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c7..ba949a2c93ac 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,334 +43,6 @@ unsigned long pci_probe_only = 1;
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
-static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
-{
- const u32 *prop;
- int len;
-
- prop = of_get_property(np, name, &len);
- if (prop && len >= 4)
- return *prop;
- return def;
-}
-
-static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
-{
- unsigned int flags = 0;
-
- if (addr0 & 0x02000000) {
- flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
- flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
- flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
- if (addr0 & 0x40000000)
- flags |= IORESOURCE_PREFETCH
- | PCI_BASE_ADDRESS_MEM_PREFETCH;
- /* Note: We don't know whether the ROM has been left enabled
- * by the firmware or not. We mark it as disabled (ie, we do
- * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
- * do a config space read, it will be force-enabled if needed
- */
- if (!bridge && (addr0 & 0xff) == 0x30)
- flags |= IORESOURCE_READONLY;
- } else if (addr0 & 0x01000000)
- flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
- if (flags)
- flags |= IORESOURCE_SIZEALIGN;
- return flags;
-}
-
-
-static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
-{
- u64 base, size;
- unsigned int flags;
- struct resource *res;
- const u32 *addrs;
- u32 i;
- int proplen;
-
- addrs = of_get_property(node, "assigned-addresses", &proplen);
- if (!addrs)
- return;
- pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
- for (; proplen >= 20; proplen -= 20, addrs += 5) {
- flags = pci_parse_of_flags(addrs[0], 0);
- if (!flags)
- continue;
- base = of_read_number(&addrs[1], 2);
- size = of_read_number(&addrs[3], 2);
- if (!size)
- continue;
- i = addrs[0] & 0xff;
- pr_debug(" base: %llx, size: %llx, i: %x\n",
- (unsigned long long)base,
- (unsigned long long)size, i);
-
- if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
- res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
- } else if (i == dev->rom_base_reg) {
- res = &dev->resource[PCI_ROM_RESOURCE];
- flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
- } else {
- printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
- continue;
- }
- res->start = base;
- res->end = base + size - 1;
- res->flags = flags;
- res->name = pci_name(dev);
- }
-}
-
-struct pci_dev *of_create_pci_dev(struct device_node *node,
- struct pci_bus *bus, int devfn)
-{
- struct pci_dev *dev;
- const char *type;
-
- dev = alloc_pci_dev();
- if (!dev)
- return NULL;
- type = of_get_property(node, "device_type", NULL);
- if (type == NULL)
- type = "";
-
- pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
-
- dev->bus = bus;
- dev->sysdata = node;
- dev->dev.parent = bus->bridge;
- dev->dev.bus = &pci_bus_type;
- dev->devfn = devfn;
- dev->multifunction = 0; /* maybe a lie? */
-
- dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
- dev->device = get_int_prop(node, "device-id", 0xffff);
- dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
- dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
-
- dev->cfg_size = pci_cfg_space_size(dev);
-
- dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
- dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
- dev->class = get_int_prop(node, "class-code", 0);
- dev->revision = get_int_prop(node, "revision-id", 0);
-
- pr_debug(" class: 0x%x\n", dev->class);
- pr_debug(" revision: 0x%x\n", dev->revision);
-
- dev->current_state = 4; /* unknown power state */
- dev->error_state = pci_channel_io_normal;
- dev->dma_mask = 0xffffffff;
-
- if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
- /* a PCI-PCI bridge */
- dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
- dev->rom_base_reg = PCI_ROM_ADDRESS1;
- } else if (!strcmp(type, "cardbus")) {
- dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
- } else {
- dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
- dev->rom_base_reg = PCI_ROM_ADDRESS;
- /* Maybe do a default OF mapping here */
- dev->irq = NO_IRQ;
- }
-
- pci_parse_of_addrs(node, dev);
-
- pr_debug(" adding to system ...\n");
-
- pci_device_add(dev, bus);
-
- return dev;
-}
-EXPORT_SYMBOL(of_create_pci_dev);
-
-static void __devinit __of_scan_bus(struct device_node *node,
- struct pci_bus *bus, int rescan_existing)
-{
- struct device_node *child;
- const u32 *reg;
- int reglen, devfn;
- struct pci_dev *dev;
-
- pr_debug("of_scan_bus(%s) bus no %d... \n",
- node->full_name, bus->number);
-
- /* Scan direct children */
- for_each_child_of_node(node, child) {
- pr_debug(" * %s\n", child->full_name);
- reg = of_get_property(child, "reg", &reglen);
- if (reg == NULL || reglen < 20)
- continue;
- devfn = (reg[0] >> 8) & 0xff;
-
- /* create a new pci_dev for this device */
- dev = of_create_pci_dev(child, bus, devfn);
- if (!dev)
- continue;
- pr_debug(" dev header type: %x\n", dev->hdr_type);
- }
-
- /* Apply all fixups necessary. We don't fixup the bus "self"
- * for an existing bridge that is being rescanned
- */
- if (!rescan_existing)
- pcibios_setup_bus_self(bus);
- pcibios_setup_bus_devices(bus);
-
- /* Now scan child busses */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
- dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
- struct device_node *child = pci_device_to_OF_node(dev);
- if (dev)
- of_scan_pci_bridge(child, dev);
- }
- }
-}
-
-void __devinit of_scan_bus(struct device_node *node,
- struct pci_bus *bus)
-{
- __of_scan_bus(node, bus, 0);
-}
-EXPORT_SYMBOL_GPL(of_scan_bus);
-
-void __devinit of_rescan_bus(struct device_node *node,
- struct pci_bus *bus)
-{
- __of_scan_bus(node, bus, 1);
-}
-EXPORT_SYMBOL_GPL(of_rescan_bus);
-
-void __devinit of_scan_pci_bridge(struct device_node *node,
- struct pci_dev *dev)
-{
- struct pci_bus *bus;
- const u32 *busrange, *ranges;
- int len, i, mode;
- struct resource *res;
- unsigned int flags;
- u64 size;
-
- pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
-
- /* parse bus-range property */
- busrange = of_get_property(node, "bus-range", &len);
- if (busrange == NULL || len != 8) {
- printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
- node->full_name);
- return;
- }
- ranges = of_get_property(node, "ranges", &len);
- if (ranges == NULL) {
- printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
- node->full_name);
- return;
- }
-
- bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
- if (!bus) {
- printk(KERN_ERR "Failed to create pci bus for %s\n",
- node->full_name);
- return;
- }
-
- bus->primary = dev->bus->number;
- bus->subordinate = busrange[1];
- bus->bridge_ctl = 0;
- bus->sysdata = node;
-
- /* parse ranges property */
- /* PCI #address-cells == 3 and #size-cells == 2 always */
- res = &dev->resource[PCI_BRIDGE_RESOURCES];
- for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
- res->flags = 0;
- bus->resource[i] = res;
- ++res;
- }
- i = 1;
- for (; len >= 32; len -= 32, ranges += 8) {
- flags = pci_parse_of_flags(ranges[0], 1);
- size = of_read_number(&ranges[6], 2);
- if (flags == 0 || size == 0)
- continue;
- if (flags & IORESOURCE_IO) {
- res = bus->resource[0];
- if (res->flags) {
- printk(KERN_ERR "PCI: ignoring extra I/O range"
- " for bridge %s\n", node->full_name);
- continue;
- }
- } else {
- if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
- printk(KERN_ERR "PCI: too many memory ranges"
- " for bridge %s\n", node->full_name);
- continue;
- }
- res = bus->resource[i];
- ++i;
- }
- res->start = of_read_number(&ranges[1], 2);
- res->end = res->start + size - 1;
- res->flags = flags;
- }
- sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
- bus->number);
- pr_debug(" bus name: %s\n", bus->name);
-
- mode = PCI_PROBE_NORMAL;
- if (ppc_md.pci_probe_mode)
- mode = ppc_md.pci_probe_mode(bus);
- pr_debug(" probe mode: %d\n", mode);
-
- if (mode == PCI_PROBE_DEVTREE)
- of_scan_bus(node, bus);
- else if (mode == PCI_PROBE_NORMAL)
- pci_scan_child_bus(bus);
-}
-EXPORT_SYMBOL(of_scan_pci_bridge);
-
-void __devinit scan_phb(struct pci_controller *hose)
-{
- struct pci_bus *bus;
- struct device_node *node = hose->dn;
- int mode;
-
- pr_debug("PCI: Scanning PHB %s\n",
- node ? node->full_name : "<NO NAME>");
-
- /* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
- if (bus == NULL) {
- printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
- hose->global_number);
- return;
- }
- bus->secondary = hose->first_busno;
- hose->bus = bus;
-
- /* Get some IO space for the new PHB */
- pcibios_map_io_space(bus);
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
- /* Get probe mode and perform scan */
- mode = PCI_PROBE_NORMAL;
- if (node && ppc_md.pci_probe_mode)
- mode = ppc_md.pci_probe_mode(bus);
- pr_debug(" probe mode: %d\n", mode);
- if (mode == PCI_PROBE_DEVTREE) {
- bus->subordinate = hose->last_busno;
- of_scan_bus(node, bus);
- }
-
- if (mode == PCI_PROBE_NORMAL)
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-}
-
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
@@ -392,7 +64,7 @@ static int __init pcibios_init(void)
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- scan_phb(hose);
+ pcibios_scan_phb(hose, hose->dn);
pci_bus_add_devices(hose->bus);
}
@@ -526,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
+{
+ pcibios_map_io_space(hose->bus);
+}
+
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
new file mode 100644
index 000000000000..72c31bcb7aa4
--- /dev/null
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -0,0 +1,358 @@
+/*
+ * Helper routines to scan the device tree for PCI devices and busses
+ *
+ * Migrated out of PowerPC architecture pci_64.c file by Grant Likely
+ * <grant.likely@secretlab.ca> so that these routines are available for
+ * 32 bit also.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Rework, based on alpha PCI code.
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+
+/**
+ * get_int_prop - Decode a u32 from a device tree property
+ */
+static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
+{
+ const u32 *prop;
+ int len;
+
+ prop = of_get_property(np, name, &len);
+ if (prop && len >= 4)
+ return *prop;
+ return def;
+}
+
+/**
+ * pci_parse_of_flags - Parse the flags cell of a device tree PCI address
+ * @addr0: value of 1st cell of a device tree PCI address.
+ * @bridge: Set this flag if the address is from a bridge 'ranges' property
+ */
+unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+{
+ unsigned int flags = 0;
+
+ if (addr0 & 0x02000000) {
+ flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+ flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+ flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+ if (addr0 & 0x40000000)
+ flags |= IORESOURCE_PREFETCH
+ | PCI_BASE_ADDRESS_MEM_PREFETCH;
+ /* Note: We don't know whether the ROM has been left enabled
+ * by the firmware or not. We mark it as disabled (ie, we do
+ * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+ * do a config space read, it will be force-enabled if needed
+ */
+ if (!bridge && (addr0 & 0xff) == 0x30)
+ flags |= IORESOURCE_READONLY;
+ } else if (addr0 & 0x01000000)
+ flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+ if (flags)
+ flags |= IORESOURCE_SIZEALIGN;
+ return flags;
+}
+
+/**
+ * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node
+ * @node: device tree node for the PCI device
+ * @dev: pci_dev structure for the device
+ *
+ * This function parses the 'assigned-addresses' property of a PCI devices'
+ * device tree node and writes them into the associated pci_dev structure.
+ */
+static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
+{
+ u64 base, size;
+ unsigned int flags;
+ struct resource *res;
+ const u32 *addrs;
+ u32 i;
+ int proplen;
+
+ addrs = of_get_property(node, "assigned-addresses", &proplen);
+ if (!addrs)
+ return;
+ pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
+ for (; proplen >= 20; proplen -= 20, addrs += 5) {
+ flags = pci_parse_of_flags(addrs[0], 0);
+ if (!flags)
+ continue;
+ base = of_read_number(&addrs[1], 2);
+ size = of_read_number(&addrs[3], 2);
+ if (!size)
+ continue;
+ i = addrs[0] & 0xff;
+ pr_debug(" base: %llx, size: %llx, i: %x\n",
+ (unsigned long long)base,
+ (unsigned long long)size, i);
+
+ if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+ res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+ } else if (i == dev->rom_base_reg) {
+ res = &dev->resource[PCI_ROM_RESOURCE];
+ flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+ } else {
+ printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+ continue;
+ }
+ res->start = base;
+ res->end = base + size - 1;
+ res->flags = flags;
+ res->name = pci_name(dev);
+ }
+}
+
+/**
+ * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev
+ * @node: device tree node pointer
+ * @bus: bus the device is sitting on
+ * @devfn: PCI function number, extracted from device tree by caller.
+ */
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+ struct pci_bus *bus, int devfn)
+{
+ struct pci_dev *dev;
+ const char *type;
+
+ dev = alloc_pci_dev();
+ if (!dev)
+ return NULL;
+ type = of_get_property(node, "device_type", NULL);
+ if (type == NULL)
+ type = "";
+
+ pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
+
+ dev->bus = bus;
+ dev->sysdata = node;
+ dev->dev.parent = bus->bridge;
+ dev->dev.bus = &pci_bus_type;
+ dev->devfn = devfn;
+ dev->multifunction = 0; /* maybe a lie? */
+
+ dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
+ dev->device = get_int_prop(node, "device-id", 0xffff);
+ dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
+ dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
+
+ dev->cfg_size = pci_cfg_space_size(dev);
+
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ dev->class = get_int_prop(node, "class-code", 0);
+ dev->revision = get_int_prop(node, "revision-id", 0);
+
+ pr_debug(" class: 0x%x\n", dev->class);
+ pr_debug(" revision: 0x%x\n", dev->revision);
+
+ dev->current_state = 4; /* unknown power state */
+ dev->error_state = pci_channel_io_normal;
+ dev->dma_mask = 0xffffffff;
+
+ if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+ /* a PCI-PCI bridge */
+ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+ dev->rom_base_reg = PCI_ROM_ADDRESS1;
+ } else if (!strcmp(type, "cardbus")) {
+ dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+ } else {
+ dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+ dev->rom_base_reg = PCI_ROM_ADDRESS;
+ /* Maybe do a default OF mapping here */
+ dev->irq = NO_IRQ;
+ }
+
+ of_pci_parse_addrs(node, dev);
+
+ pr_debug(" adding to system ...\n");
+
+ pci_device_add(dev, bus);
+
+ return dev;
+}
+EXPORT_SYMBOL(of_create_pci_dev);
+
+/**
+ * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
+ * @node: device tree node of bridge
+ * @dev: pci_dev structure for the bridge
+ *
+ * of_scan_bus() calls this routine for each PCI bridge that it finds, and
+ * this routine in turn call of_scan_bus() recusively to scan for more child
+ * devices.
+ */
+void __devinit of_scan_pci_bridge(struct device_node *node,
+ struct pci_dev *dev)
+{
+ struct pci_bus *bus;
+ const u32 *busrange, *ranges;
+ int len, i, mode;
+ struct resource *res;
+ unsigned int flags;
+ u64 size;
+
+ pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
+
+ /* parse bus-range property */
+ busrange = of_get_property(node, "bus-range", &len);
+ if (busrange == NULL || len != 8) {
+ printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+ node->full_name);
+ return;
+ }
+ ranges = of_get_property(node, "ranges", &len);
+ if (ranges == NULL) {
+ printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+ node->full_name);
+ return;
+ }
+
+ bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+ if (!bus) {
+ printk(KERN_ERR "Failed to create pci bus for %s\n",
+ node->full_name);
+ return;
+ }
+
+ bus->primary = dev->bus->number;
+ bus->subordinate = busrange[1];
+ bus->bridge_ctl = 0;
+ bus->sysdata = node;
+
+ /* parse ranges property */
+ /* PCI #address-cells == 3 and #size-cells == 2 always */
+ res = &dev->resource[PCI_BRIDGE_RESOURCES];
+ for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+ res->flags = 0;
+ bus->resource[i] = res;
+ ++res;
+ }
+ i = 1;
+ for (; len >= 32; len -= 32, ranges += 8) {
+ flags = pci_parse_of_flags(ranges[0], 1);
+ size = of_read_number(&ranges[6], 2);
+ if (flags == 0 || size == 0)
+ continue;
+ if (flags & IORESOURCE_IO) {
+ res = bus->resource[0];
+ if (res->flags) {
+ printk(KERN_ERR "PCI: ignoring extra I/O range"
+ " for bridge %s\n", node->full_name);
+ continue;
+ }
+ } else {
+ if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+ printk(KERN_ERR "PCI: too many memory ranges"
+ " for bridge %s\n", node->full_name);
+ continue;
+ }
+ res = bus->resource[i];
+ ++i;
+ }
+ res->start = of_read_number(&ranges[1], 2);
+ res->end = res->start + size - 1;
+ res->flags = flags;
+ }
+ sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+ bus->number);
+ pr_debug(" bus name: %s\n", bus->name);
+
+ mode = PCI_PROBE_NORMAL;
+ if (ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+ pr_debug(" probe mode: %d\n", mode);
+
+ if (mode == PCI_PROBE_DEVTREE)
+ of_scan_bus(node, bus);
+ else if (mode == PCI_PROBE_NORMAL)
+ pci_scan_child_bus(bus);
+}
+EXPORT_SYMBOL(of_scan_pci_bridge);
+
+/**
+ * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ * @rescan_existing: Flag indicating bus has already been set up
+ */
+static void __devinit __of_scan_bus(struct device_node *node,
+ struct pci_bus *bus, int rescan_existing)
+{
+ struct device_node *child;
+ const u32 *reg;
+ int reglen, devfn;
+ struct pci_dev *dev;
+
+ pr_debug("of_scan_bus(%s) bus no %d... \n",
+ node->full_name, bus->number);
+
+ /* Scan direct children */
+ for_each_child_of_node(node, child) {
+ pr_debug(" * %s\n", child->full_name);
+ reg = of_get_property(child, "reg", &reglen);
+ if (reg == NULL || reglen < 20)
+ continue;
+ devfn = (reg[0] >> 8) & 0xff;
+
+ /* create a new pci_dev for this device */
+ dev = of_create_pci_dev(child, bus, devfn);
+ if (!dev)
+ continue;
+ pr_debug(" dev header type: %x\n", dev->hdr_type);
+ }
+
+ /* Apply all fixups necessary. We don't fixup the bus "self"
+ * for an existing bridge that is being rescanned
+ */
+ if (!rescan_existing)
+ pcibios_setup_bus_self(bus);
+ pcibios_setup_bus_devices(bus);
+
+ /* Now scan child busses */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+ dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+ struct device_node *child = pci_device_to_OF_node(dev);
+ if (dev)
+ of_scan_pci_bridge(child, dev);
+ }
+ }
+}
+
+/**
+ * of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ */
+void __devinit of_scan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+/**
+ * of_rescan_bus - given a PCI bus node, scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ *
+ * Same as of_scan_bus, but for a pci_bus structure that has already been
+ * setup.
+ */
+void __devinit of_rescan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
+
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 70e1f57f7dd8..7ceefaf3a7f5 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -32,6 +32,9 @@ struct cpu_hw_counters {
unsigned long mmcr[3];
struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+ u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+ unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+ unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
};
DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
@@ -62,7 +65,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
{
return 0;
}
-static inline void perf_set_pmu_inuse(int inuse) { }
static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
static inline u32 perf_get_misc_flags(struct pt_regs *regs)
{
@@ -93,11 +95,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
return 0;
}
-static inline void perf_set_pmu_inuse(int inuse)
-{
- get_lppaca()->pmcregs_in_use = inuse;
-}
-
/*
* The user wants a data address recorded.
* If we're not doing instruction sampling, give them the SDAR
@@ -245,13 +242,11 @@ static void write_pmc(int idx, unsigned long val)
* and see if any combination of alternative codes is feasible.
* The feasible set is returned in event[].
*/
-static int power_check_constraints(u64 event[], unsigned int cflags[],
+static int power_check_constraints(struct cpu_hw_counters *cpuhw,
+ u64 event[], unsigned int cflags[],
int n_ev)
{
unsigned long mask, value, nv;
- u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
- unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
- unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
int i, j;
@@ -266,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
&& !ppmu->limited_pmc_event(event[i])) {
ppmu->get_alternatives(event[i], cflags[i],
- alternatives[i]);
- event[i] = alternatives[i][0];
+ cpuhw->alternatives[i]);
+ event[i] = cpuhw->alternatives[i][0];
}
- if (ppmu->get_constraint(event[i], &amasks[i][0],
- &avalues[i][0]))
+ if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0],
+ &cpuhw->avalues[i][0]))
return -1;
}
value = mask = 0;
for (i = 0; i < n_ev; ++i) {
- nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf);
+ nv = (value | cpuhw->avalues[i][0]) +
+ (value & cpuhw->avalues[i][0] & addf);
if ((((nv + tadd) ^ value) & mask) != 0 ||
- (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0)
+ (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+ cpuhw->amasks[i][0]) != 0)
break;
value = nv;
- mask |= amasks[i][0];
+ mask |= cpuhw->amasks[i][0];
}
if (i == n_ev)
return 0; /* all OK */
@@ -291,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
for (i = 0; i < n_ev; ++i) {
choice[i] = 0;
n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
- alternatives[i]);
+ cpuhw->alternatives[i]);
for (j = 1; j < n_alt[i]; ++j)
- ppmu->get_constraint(alternatives[i][j],
- &amasks[i][j], &avalues[i][j]);
+ ppmu->get_constraint(cpuhw->alternatives[i][j],
+ &cpuhw->amasks[i][j],
+ &cpuhw->avalues[i][j]);
}
/* enumerate all possibilities and see if any will work */
@@ -313,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
* where k > j, will satisfy the constraints.
*/
while (++j < n_alt[i]) {
- nv = (value | avalues[i][j]) +
- (value & avalues[i][j] & addf);
+ nv = (value | cpuhw->avalues[i][j]) +
+ (value & cpuhw->avalues[i][j] & addf);
if ((((nv + tadd) ^ value) & mask) == 0 &&
- (((nv + tadd) ^ avalues[i][j])
- & amasks[i][j]) == 0)
+ (((nv + tadd) ^ cpuhw->avalues[i][j])
+ & cpuhw->amasks[i][j]) == 0)
break;
}
if (j >= n_alt[i]) {
@@ -339,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
svalues[i] = value;
smasks[i] = mask;
value = nv;
- mask |= amasks[i][j];
+ mask |= cpuhw->amasks[i][j];
++i;
j = -1;
}
@@ -347,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
/* OK, we have a feasible combination, tell the caller the solution */
for (i = 0; i < n_ev; ++i)
- event[i] = alternatives[i][choice[i]];
+ event[i] = cpuhw->alternatives[i][choice[i]];
return 0;
}
@@ -531,8 +529,7 @@ void hw_perf_disable(void)
* Check if we ever enabled the PMU on this cpu.
*/
if (!cpuhw->pmcs_enabled) {
- if (ppc_md.enable_pmcs)
- ppc_md.enable_pmcs();
+ ppc_enable_pmcs();
cpuhw->pmcs_enabled = 1;
}
@@ -594,7 +591,7 @@ void hw_perf_enable(void)
mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
if (cpuhw->n_counters == 0)
- perf_set_pmu_inuse(0);
+ ppc_set_pmu_inuse(0);
goto out_enable;
}
@@ -627,7 +624,7 @@ void hw_perf_enable(void)
* bit set and set the hardware counters to their initial values.
* Then unfreeze the counters.
*/
- perf_set_pmu_inuse(1);
+ ppc_set_pmu_inuse(1);
mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
@@ -752,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
return -EAGAIN;
if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
return -EAGAIN;
- i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0);
+ i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
if (i < 0)
return -EAGAIN;
cpuhw->n_counters = n0 + n;
@@ -807,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter)
cpuhw->flags[n0] = counter->hw.counter_base;
if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
goto out;
- if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1))
+ if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
goto out;
counter->hw.config = cpuhw->events[n0];
@@ -1012,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
unsigned int cflags[MAX_HWCOUNTERS];
int n;
int err;
+ struct cpu_hw_counters *cpuhw;
if (!ppmu)
return ERR_PTR(-ENXIO);
@@ -1090,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
cflags[n] = flags;
if (check_excludes(ctrs, cflags, n, 1))
return ERR_PTR(-EINVAL);
- if (power_check_constraints(events, cflags, n + 1))
+
+ cpuhw = &get_cpu_var(cpu_hw_counters);
+ err = power_check_constraints(cpuhw, events, cflags, n + 1);
+ put_cpu_var(cpu_hw_counters);
+ if (err)
return ERR_PTR(-EINVAL);
counter->hw.config = events[n];
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 892a9f2e6d76..0a3216433051 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr)
return ppc_md.set_dabr(dabr);
/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
- mtspr(SPRN_DABR, dabr);
-#endif
-
#if defined(CONFIG_BOOKE)
mtspr(SPRN_DAC1, dabr);
+#elif defined(CONFIG_PPC_BOOK3S)
+ mtspr(SPRN_DABR, dabr);
#endif
+
return 0;
}
@@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
#endif /* CONFIG_SMP */
- if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
- set_dabr(new->thread.dabr);
-
#if defined(CONFIG_BOOKE)
/* If new thread DAC (HW breakpoint) is the same then leave it */
if (new->thread.dabr)
set_dabr(new->thread.dabr);
+#else
+ if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
+ set_dabr(new->thread.dabr);
#endif
+
new_thread = &new->thread;
old_thread = &current->thread;
@@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
sp_vsid |= SLB_VSID_KERNEL | llp;
p->thread.ksp_vsid = sp_vsid;
}
+#endif /* CONFIG_PPC_STD_MMU_64 */
/*
* The PPC64 ABI makes use of a TOC to contain function
@@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
* to the TOC entry. The first entry is a pointer to the actual
* function.
*/
+#ifdef CONFIG_PPC64
kregs->nip = *((unsigned long *)ret_from_fork);
#else
kregs->nip = (unsigned long)ret_from_fork;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index a538824616fd..864334b337a3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -190,6 +190,8 @@ static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
+static unsigned long __initdata prom_memory_limit;
+
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
@@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename,
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
}
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
+ || ('a' <= (c) && (c) <= 'f') \
+ || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c) ('0' <= (c) && (c) <= '9')
+#define islower(c) ('a' <= (c) && (c) <= 'z')
+#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+ unsigned long result = 0, base = 10, value;
+
+ if (*cp == '0') {
+ base = 8;
+ cp++;
+ if (toupper(*cp) == 'X') {
+ cp++;
+ base = 16;
+ }
+ }
+
+ while (isxdigit(*cp) &&
+ (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+ result = result * base + value;
+ cp++;
+ }
+
+ if (endp)
+ *endp = cp;
+
+ return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+ unsigned long ret = prom_strtoul(ptr, retptr);
+ int shift = 0;
+
+ /*
+ * We can't use a switch here because GCC *may* generate a
+ * jump table which won't work, because we're not running at
+ * the address we're linked at.
+ */
+ if ('G' == **retptr || 'g' == **retptr)
+ shift = 30;
+
+ if ('M' == **retptr || 'm' == **retptr)
+ shift = 20;
+
+ if ('K' == **retptr || 'k' == **retptr)
+ shift = 10;
+
+ if (shift) {
+ ret <<= shift;
+ (*retptr)++;
+ }
+
+ return ret;
+}
+
/*
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
@@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename,
static void __init early_cmdline_parse(void)
{
struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
const char *opt;
-#endif
+
char *p;
int l = 0;
@@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void)
RELOC(prom_iommu_force_on) = 1;
}
#endif
+ opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+ if (opt) {
+ opt += 4;
+ RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+ /* Align to 16 MB == size of ppc64 large page */
+ RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+ }
}
#ifdef CONFIG_PPC_PSERIES
@@ -1027,6 +1098,29 @@ static void __init prom_init_mem(void)
}
/*
+ * If prom_memory_limit is set we reduce the upper limits *except* for
+ * alloc_top_high. This must be the real top of RAM so we can put
+ * TCE's up there.
+ */
+
+ RELOC(alloc_top_high) = RELOC(ram_top);
+
+ if (RELOC(prom_memory_limit)) {
+ if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+ prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+ prom_printf("Ignoring mem=%x >= ram_top.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else {
+ RELOC(ram_top) = RELOC(prom_memory_limit);
+ RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+ }
+ }
+
+ /*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
* Some RS64 machines have buggy firmware where claims up at
@@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void)
RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
+ prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
@@ -1259,10 +1354,6 @@ static void __init prom_initialize_tce_table(void)
*
* -- Cort
*/
-extern char __secondary_hold;
-extern unsigned long __secondary_hold_spinloop;
-extern unsigned long __secondary_hold_acknowledge;
-
/*
* We want to reference the copy of __secondary_hold_* in the
* 0 - 0x100 address range
@@ -2399,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
/*
* Fill in some infos for use by the kernel later on
*/
+ if (RELOC(prom_memory_limit))
+ prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+ &RELOC(prom_memory_limit),
+ sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(prom_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c434823b8c83..bf90361bb70f 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -39,6 +39,7 @@
#include <asm/smp.h>
#include <asm/atomic.h>
#include <asm/time.h>
+#include <asm/mmu.h>
struct rtas_t rtas = {
.lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info)
{
long rc = H_SUCCESS;
unsigned long msr_save;
+ u16 slb_size = mmu_slb_size;
int cpu;
struct rtas_suspend_me_data *data =
(struct rtas_suspend_me_data *)info;
@@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info)
/* All other cpus are in H_JOIN, this cpu does
* the suspend.
*/
+ slb_set_size(SLB_MIN_SIZE);
printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
smp_processor_id());
data->error = rtas_call(data->token, 0, 1, NULL);
- if (data->error)
+ if (data->error) {
printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
data->error);
+ slb_set_size(slb_size);
+ }
} else {
printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
smp_processor_id(), rc);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e1e3059cf34b..53bcf3d792db 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr)
}
EXPORT_SYMBOL(nvram_write_byte);
+ssize_t nvram_get_size(void)
+{
+ if (ppc_md.nvram_size)
+ return ppc_md.nvram_size();
+ return -1;
+}
+EXPORT_SYMBOL(nvram_get_size);
+
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index aa6e4500635f..797ea95aae2e 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -63,6 +63,7 @@
#include <asm/udbg.h>
#include <asm/kexec.h>
#include <asm/swiotlb.h>
+#include <asm/mmu_context.h>
#include "setup.h"
@@ -143,11 +144,14 @@ early_param("smt-enabled", early_smt_enabled);
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-/* Put the paca pointer into r13 and SPRG3 */
+/* Put the paca pointer into r13 and SPRG_PACA */
void __init setup_paca(int cpu)
{
local_paca = &paca[cpu];
- mtspr(SPRN_SPRG3, local_paca);
+ mtspr(SPRN_SPRG_PACA, local_paca);
+#ifdef CONFIG_PPC_BOOK3E
+ mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#endif
}
/*
@@ -231,9 +235,6 @@ void early_setup_secondary(void)
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-extern unsigned long __secondary_hold_spinloop;
-extern void generic_secondary_smp_init(void);
-
void smp_release_cpus(void)
{
unsigned long *ptr;
@@ -454,6 +455,24 @@ static void __init irqstack_early_init(void)
#define irqstack_early_init()
#endif
+#ifdef CONFIG_PPC_BOOK3E
+static void __init exc_lvl_early_init(void)
+{
+ unsigned int i;
+
+ for_each_possible_cpu(i) {
+ critirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ dbgirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ mcheckirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ }
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
/*
* Stack space used when we detect a bad kernel stack pointer, and
* early in SMP boots before relocation is enabled.
@@ -513,6 +532,7 @@ void __init setup_arch(char **cmdline_p)
init_mm.brk = klimit;
irqstack_early_init();
+ exc_lvl_early_init();
emergency_stack_init();
#ifdef CONFIG_PPC_STD_MMU_64
@@ -535,6 +555,10 @@ void __init setup_arch(char **cmdline_p)
#endif
paging_init();
+
+ /* Initialize the MMU context management stuff */
+ mmu_context_init();
+
ppc64_boot_msg(0x15, "Setup Done");
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0b47de07302d..d387b3937ccc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
cpu_callin_map[boot_cpuid] = 1;
if (smp_ops)
- max_cpus = smp_ops->probe();
+ if (smp_ops->probe)
+ max_cpus = smp_ops->probe();
+ else
+ max_cpus = NR_CPUS;
else
max_cpus = 1;
@@ -412,9 +415,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
* CPUs can take much longer to come up in the
* hotplug case. Wait five seconds.
*/
- for (c = 25; c && !cpu_callin_map[cpu]; c--) {
- msleep(200);
- }
+ for (c = 5000; c && !cpu_callin_map[cpu]; c--)
+ msleep(1);
#endif
if (!cpu_callin_map[cpu]) {
@@ -494,7 +496,8 @@ int __devinit start_secondary(void *unused)
preempt_disable();
cpu_callin_map[cpu] = 1;
- smp_ops->setup_cpu(cpu);
+ if (smp_ops->setup_cpu)
+ smp_ops->setup_cpu(cpu);
if (smp_ops->take_timebase)
smp_ops->take_timebase();
@@ -557,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
old_mask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
- if (smp_ops)
+ if (smp_ops && smp_ops->setup_cpu)
smp_ops->setup_cpu(boot_cpuid);
set_cpus_allowed(current, old_mask);
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index bb1cfcfdbbbb..1cc5e9e5da96 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin)
return sys_lseek(fd, (int)offset, origin);
}
+long compat_sys_truncate(const char __user * path, u32 length)
+{
+ /* sign extend length */
+ return sys_truncate(path, (int)length);
+}
+
+long compat_sys_ftruncate(int fd, u32 length)
+{
+ /* sign extend length */
+ return sys_ftruncate(fd, (int)length);
+}
+
/* Note: it is necessary to treat bufsiz as an unsigned int,
* with the corresponding cast to a signed int to insure that the
* proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index f41aec85aa49..956ab33fd73f 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -17,6 +17,7 @@
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/smp.h>
+#include <asm/pmc.h>
#include "cacheinfo.h"
@@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled);
void ppc_enable_pmcs(void)
{
+ ppc_set_pmu_inuse(1);
+
/* Only need to enable them once */
if (__get_cpu_var(pmcs_enabled))
return;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceeac..a180b4f9a4f6 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void)
unsigned long tb_ticks = tb - iSeries_recal_tb;
unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec;
- unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+ unsigned long new_tb_ticks_per_jiffy =
+ DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ);
long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
char sign = '+';
/* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
@@ -726,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
return found;
}
+/* should become __cpuinit when secondary_cpu_time_init also is */
+void start_cpu_decrementer(void)
+{
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+ /* Clear any pending timer interrupts */
+ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+ /* Enable decrementer interrupt */
+ mtspr(SPRN_TCR, TCR_DIE);
+#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
+}
+
void __init generic_calibrate_decr(void)
{
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
@@ -745,14 +758,6 @@ void __init generic_calibrate_decr(void)
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
}
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
- /* Clear any pending timer interrupts */
- mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
- /* Enable decrementer interrupt */
- mtspr(SPRN_TCR, TCR_DIE);
-#endif
}
int update_persistent_clock(struct timespec now)
@@ -913,6 +918,11 @@ static void __init init_decrementer_clockevent(void)
void secondary_cpu_time_init(void)
{
+ /* Start the decrementer on CPUs that have manual control
+ * such as BookE
+ */
+ start_cpu_decrementer();
+
/* FIME: Should make unrelatred change to move snapshot_timebase
* call here ! */
register_decrementer_clockevent(smp_processor_id());
@@ -1016,6 +1026,11 @@ void __init time_init(void)
write_sequnlock_irqrestore(&xtime_lock, flags);
+ /* Start the decrementer on CPUs that have manual control
+ * such as BookE
+ */
+ start_cpu_decrementer();
+
/* Register the clocksource, if we're not running on iSeries */
if (!firmware_has_feature(FW_FEATURE_ISERIES))
clocksource_init();
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ad06d5c75b15..a0abce251d0a 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
} else {
vdso_pagelist = vdso64_pagelist;
vdso_pages = vdso64_pages;
- vdso_base = VDSO64_MBASE;
+ /*
+ * On 64bit we don't have a preferred map address. This
+ * allows get_unmapped_area to find an area near other mmaps
+ * and most likely share a SLB entry.
+ */
+ vdso_base = 0;
}
#else
vdso_pagelist = vdso32_pagelist;
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index c3d57bd01a88..b54b81688132 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -12,6 +12,7 @@ endif
targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+GCOV_PROFILE := n
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index fa7f1b8f3e50..dd0c8e936775 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
+GCOV_PROFILE := n
+
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
$(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ea4d64644d02..67b6916f0e94 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec)
1:
/* enable use of VMX after return */
#ifdef CONFIG_PPC32
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
oris r9,r9,MSR_VEC@h
#else
ld r4,PACACURRENT(r13)
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 819e59f6f7c7..bc7b41edbdfc 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
vio_cmo_dealloc(viodev, alloc_size);
}
-struct dma_mapping_ops vio_dma_mapping_ops = {
+struct dma_map_ops vio_dma_mapping_ops = {
.alloc_coherent = vio_dma_iommu_alloc_coherent,
.free_coherent = vio_dma_iommu_free_coherent,
.map_sg = vio_dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 244e3658983c..58da4070723d 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -239,10 +239,6 @@ SECTIONS
}
#endif
- . = ALIGN(PAGE_SIZE);
- _edata = .;
- PROVIDE32 (edata = .);
-
/* The initial task and kernel stack */
#ifdef CONFIG_PPC32
. = ALIGN(8192);
@@ -276,6 +272,10 @@ SECTIONS
__nosave_end = .;
}
+ . = ALIGN(PAGE_SIZE);
+ _edata = .;
+ PROVIDE32 (edata = .);
+
/*
* And finally the bss
*/