summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_40x.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_40x.S')
-rw-r--r--arch/powerpc/kernel/head_40x.S321
1 files changed, 70 insertions, 251 deletions
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 9bb663977e84..926bfa73586a 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -26,17 +26,16 @@
*/
#include <linux/init.h>
+#include <linux/pgtable.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/pgtable.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/export.h>
-#include <asm/asm-405.h>
#include "head_32.h"
@@ -176,135 +175,16 @@ _ENTRY(saved_ksp_limit)
* 0x0300 - Data Storage Exception
* This happens for just a few reasons. U0 set (but we don't do that),
* or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit. Otherwise, we call heavywight functions to do the work.
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
*/
START_EXCEPTION(0x0300, DataStorage)
- mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
- mtspr SPRN_SPRG_SCRATCH1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
- mtspr SPRN_SPRG_SCRATCH3, r12
- mtspr SPRN_SPRG_SCRATCH4, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH5, r12
-#endif
-
- /* First, check if it was a zone fault (which means a user
- * tried to access a kernel or read-protected page - always
- * a SEGV). All other faults here must be stores, so no
- * need to check ESR_DST as well. */
- mfspr r10, SPRN_ESR
- andis. r10, r10, ESR_DIZ@h
- bne 2f
-
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, PAGE_OFFSET@h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG_THREAD
- lwz r11,PGDIR(r11)
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r11, 0(r11) /* Get L1 entry */
- rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
- beq 2f /* Bail if no table */
-
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
-
- andi. r9, r11, _PAGE_RW /* Is it writeable? */
- beq 2f /* Bail if not */
-
- /* Update 'changed'.
- */
- ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
- stw r11, 0(r12) /* Update Linux page table */
-
- /* Most of the Linux PTE is ready to load into the TLB LO.
- * We set ZSEL, where only the LS-bit determines user access.
- * We set execute, because we don't have the granularity to
- * properly set this at the page level (Linux problem).
- * If shared is set, we cause a zero PID->TID load.
- * Many of these bits are software only. Bits we don't set
- * here we (properly should) assume have the appropriate value.
- */
- li r12, 0x0ce2
- andc r11, r11, r12 /* Make sure 20, 21 are zero */
-
- /* find the TLB index that caused the fault. It has to be here.
- */
- tlbsx r9, 0, r10
-
- tlbwe r11, r9, TLB_DATA /* Load TLB LO */
-
- /* Done...restore registers and get out of here.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG_SCRATCH5
- mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG_SCRATCH4
- mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
- mfspr r11, SPRN_SPRG_SCRATCH1
- mfspr r10, SPRN_SPRG_SCRATCH0
- PPC405_ERR77_SYNC
- rfi /* Should sync shadow TLBs */
- b . /* prevent prefetch past rfi */
-
-2:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG_SCRATCH5
- mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG_SCRATCH4
- mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
- mfspr r11, SPRN_SPRG_SCRATCH1
- mfspr r10, SPRN_SPRG_SCRATCH0
- b DataAccess
+ EXCEPTION_PROLOG
+ mfspr r5, SPRN_ESR /* Grab the ESR, save it, pass arg3 */
+ stw r5, _ESR(r11)
+ mfspr r4, SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ stw r4, _DEAR(r11)
+ EXC_XFER_LITE(0x300, handle_page_fault)
/*
* 0x0400 - Instruction Storage Exception
@@ -344,8 +224,9 @@ _ENTRY(saved_ksp_limit)
/* 0x0C00 - System Call Exception */
START_EXCEPTION(0x0C00, SystemCall)
SYSCALL_ENTRY 0xc00
+/* Trap_0D is commented out to get more space for system call exception */
- EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
+/* EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD) */
EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_STD)
@@ -371,21 +252,11 @@ _ENTRY(saved_ksp_limit)
START_EXCEPTION(0x1100, DTLBMiss)
mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_SCRATCH1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH5, r12
-#endif
+ mfcr r12
+ mfspr r9, SPRN_PID
+ mtspr SPRN_SPRG_SCRATCH5, r9
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -408,28 +279,34 @@ _ENTRY(saved_ksp_limit)
4:
tophys(r11, r11)
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ lwz r11, 0(r11) /* Get L1 entry */
+ andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
- andi. r9, r11, _PAGE_PRESENT
- beq 5f
+ rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r11) /* Get Linux PTE */
+#ifdef CONFIG_SWAP
+ li r9, _PAGE_PRESENT | _PAGE_ACCESSED
+#else
+ li r9, _PAGE_PRESENT
+#endif
+ andc. r9, r9, r11 /* Check permission */
+ bne 5f
- ori r11, r11, _PAGE_ACCESSED
- stw r11, 0(r12)
+ rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */
+ and r9, r9, r11 /* hwwrite = dirty & rw */
+ rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */
/* Create TLB tag. This is the faulting address plus a static
* set of bits. These are size, valid, E, U0.
*/
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
+ li r9, 0x00c0
+ rlwimi r10, r9, 0, 20, 31
b finish_tlb_load
2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
+ rlwinm. r9, r11, 2, 22, 24
beq 5f
/* Create TLB tag. This is the faulting address, plus a static
@@ -437,7 +314,6 @@ _ENTRY(saved_ksp_limit)
*/
ori r9, r9, 0x40
rlwimi r10, r9, 0, 20, 31
- mr r11, r12
b finish_tlb_load
@@ -445,24 +321,14 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG_SCRATCH5
- mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
- mtcr r11
+ mfspr r9, SPRN_SPRG_SCRATCH5
+ mtspr SPRN_PID, r9
+ mtcr r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
- b DataAccess
+ b DataStorage
/* 0x1200 - Instruction TLB Miss Exception
* Nearly the same as above, except we get our information from different
@@ -471,21 +337,11 @@ _ENTRY(saved_ksp_limit)
START_EXCEPTION(0x1200, ITLBMiss)
mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_SCRATCH1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH5, r12
-#endif
+ mfcr r12
+ mfspr r9, SPRN_PID
+ mtspr SPRN_SPRG_SCRATCH5, r9
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -508,28 +364,34 @@ _ENTRY(saved_ksp_limit)
4:
tophys(r11, r11)
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ lwz r11, 0(r11) /* Get L1 entry */
+ andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
- andi. r9, r11, _PAGE_PRESENT
- beq 5f
+ rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r11) /* Get Linux PTE */
+#ifdef CONFIG_SWAP
+ li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#else
+ li r9, _PAGE_PRESENT | _PAGE_EXEC
+#endif
+ andc. r9, r9, r11 /* Check permission */
+ bne 5f
- ori r11, r11, _PAGE_ACCESSED
- stw r11, 0(r12)
+ rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */
+ and r9, r9, r11 /* hwwrite = dirty & rw */
+ rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */
/* Create TLB tag. This is the faulting address plus a static
* set of bits. These are size, valid, E, U0.
*/
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
+ li r9, 0x00c0
+ rlwimi r10, r9, 0, 20, 31
b finish_tlb_load
2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
+ rlwinm. r9, r11, 2, 22, 24
beq 5f
/* Create TLB tag. This is the faulting address, plus a static
@@ -537,7 +399,6 @@ _ENTRY(saved_ksp_limit)
*/
ori r9, r9, 0x40
rlwimi r10, r9, 0, 20, 31
- mr r11, r12
b finish_tlb_load
@@ -545,21 +406,11 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG_SCRATCH5
- mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
- mtcr r11
+ mfspr r9, SPRN_SPRG_SCRATCH5
+ mtspr SPRN_PID, r9
+ mtcr r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
b InstructionAccess
@@ -568,13 +419,7 @@ _ENTRY(saved_ksp_limit)
EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
-#ifdef CONFIG_IBM405_ERR51
- /* 405GP errata 51 */
- START_EXCEPTION(0x1700, Trap_17)
- b DTLBMiss
-#else
EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
-#endif
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_STD)
@@ -635,7 +480,6 @@ _ENTRY(saved_ksp_limit)
lwz r12,GPR12(r11)
lwz r10,crit_r10@l(0)
lwz r11,crit_r11@l(0)
- PPC405_ERR77_SYNC
rfci
b .
@@ -668,18 +512,6 @@ WDTException:
(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)),
crit_transfer_to_handler, ret_from_crit_exc)
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
- EXCEPTION_PROLOG
- mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
- stw r5,_ESR(r11)
- mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
- stw r4, _DEAR(r11)
- EXC_XFER_LITE(0x300, handle_page_fault)
-
/* Other PowerPC processors, namely those derived from the 6xx-series
* have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
* However, for the 4xx-series processors these are neither defined nor
@@ -691,7 +523,7 @@ DataAccess:
* miss get to this point to load the TLB.
* r10 - TLB_TAG value
* r11 - Linux PTE
- * r12, r9 - available to use
+ * r9 - available to use
* PID - loaded with proper value when we get here
* Upon exit, we reload everything and RFI.
* Actually, it will fit now, but oh well.....a common place
@@ -700,45 +532,32 @@ DataAccess:
tlb_4xx_index:
.long 0
finish_tlb_load:
- /* load the next available TLB index.
- */
- lwz r9, tlb_4xx_index@l(0)
- addi r9, r9, 1
- andi. r9, r9, (PPC40X_TLB_SIZE-1)
- stw r9, tlb_4xx_index@l(0)
-
-6:
/*
* Clear out the software-only bits in the PTE to generate the
* TLB_DATA value. These are the bottom 2 bits of the RPM, the
* top 3 bits of the zone field, and M.
*/
- li r12, 0x0ce2
- andc r11, r11, r12
+ li r9, 0x0ce2
+ andc r11, r11, r9
+
+ /* load the next available TLB index. */
+ lwz r9, tlb_4xx_index@l(0)
+ addi r9, r9, 1
+ andi. r9, r9, PPC40X_TLB_SIZE - 1
+ stw r9, tlb_4xx_index@l(0)
tlbwe r11, r9, TLB_DATA /* Load TLB LO */
tlbwe r10, r9, TLB_TAG /* Load TLB HI */
/* Done...restore registers and get out of here.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG_SCRATCH5
- mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
- mtcr r11
+ mfspr r9, SPRN_SPRG_SCRATCH5
+ mtspr SPRN_PID, r9
+ mtcr r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
- PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 16:09:55 +0000