diff options
Diffstat (limited to 'arch/mips/au1000')
| -rw-r--r-- | arch/mips/au1000/common/irq.c | 8 | ||||
| -rw-r--r-- | arch/mips/au1000/common/prom.c | 26 | ||||
| -rw-r--r-- | arch/mips/au1000/common/setup.c | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/common/time.c | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/csb250/Makefile | 8 | ||||
| -rw-r--r-- | arch/mips/au1000/csb250/board_setup.c | 238 | ||||
| -rw-r--r-- | arch/mips/au1000/csb250/init.c | 94 | ||||
| -rw-r--r-- | arch/mips/au1000/csb250/irqmap.c | 60 | ||||
| -rw-r--r-- | arch/mips/au1000/hydrogen3/Makefile | 9 | ||||
| -rw-r--r-- | arch/mips/au1000/hydrogen3/board_setup.c | 69 | ||||
| -rw-r--r-- | arch/mips/au1000/hydrogen3/init.c | 75 | ||||
| -rw-r--r-- | arch/mips/au1000/hydrogen3/irqmap.c | 56 | ||||
| -rw-r--r-- | arch/mips/au1000/pb1200/irqmap.c | 2 |
13 files changed, 20 insertions, 629 deletions
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 29d6f8178bad..316722ee8cf5 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -251,7 +251,7 @@ void restore_local_and_enable(int controller, unsigned long mask) } -static struct hw_interrupt_type rise_edge_irq_type = { +static struct irq_chip rise_edge_irq_type = { .typename = "Au1000 Rise Edge", .startup = startup_irq, .shutdown = shutdown_irq, @@ -261,7 +261,7 @@ static struct hw_interrupt_type rise_edge_irq_type = { .end = end_irq, }; -static struct hw_interrupt_type fall_edge_irq_type = { +static struct irq_chip fall_edge_irq_type = { .typename = "Au1000 Fall Edge", .startup = startup_irq, .shutdown = shutdown_irq, @@ -271,7 +271,7 @@ static struct hw_interrupt_type fall_edge_irq_type = { .end = end_irq, }; -static struct hw_interrupt_type either_edge_irq_type = { +static struct irq_chip either_edge_irq_type = { .typename = "Au1000 Rise or Fall Edge", .startup = startup_irq, .shutdown = shutdown_irq, @@ -281,7 +281,7 @@ static struct hw_interrupt_type either_edge_irq_type = { .end = end_irq, }; -static struct hw_interrupt_type level_irq_type = { +static struct irq_chip level_irq_type = { .typename = "Au1000 Level", .startup = startup_irq, .shutdown = shutdown_irq, diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index ae7d8c57bf3f..b4b010a2fe36 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -1,7 +1,7 @@ /* * * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming YAMON is the boot loader. + * PROM library initialisation code, supports YAMON and U-Boot. * * Copyright 2000, 2001, 2006 MontaVista Software Inc. * Author: MontaVista Software, Inc. @@ -46,12 +46,6 @@ extern int prom_argc; extern char **prom_argv, **prom_envp; -typedef struct -{ - char *name; - char *val; -} t_env_var; - char * prom_getcmdline(void) { @@ -84,13 +78,21 @@ char *prom_getenv(char *envname) { /* * Return a pointer to the given environment variable. + * YAMON uses "name", "value" pairs, while U-Boot uses "name=value". */ - t_env_var *env = (t_env_var *)prom_envp; - - while (env->name) { - if (strcmp(envname, env->name) == 0) - return env->val; + char **env = prom_envp; + int i = strlen(envname); + int yamon = (*env && strchr(*env, '=') == NULL); + + while (*env) { + if (yamon) { + if (strcmp(envname, *env++) == 0) + return *env; + } else { + if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') + return *env + i + 1; + } env++; } return NULL; diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index cc5138ce9c95..377ae0d8ff00 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -51,7 +51,6 @@ extern void au1000_power_off(void); extern void au1x_time_init(void); extern void au1x_timer_setup(struct irqaction *irq); extern void au1xxx_time_init(void); -extern void au1xxx_timer_setup(struct irqaction *irq); extern void set_cpuspec(void); void __init plat_mem_setup(void) @@ -123,7 +122,6 @@ void __init plat_mem_setup(void) _machine_halt = au1000_halt; pm_power_off = au1000_power_off; board_time_init = au1xxx_time_init; - board_timer_setup = au1xxx_timer_setup; /* IO/MEM resources. */ set_io_port_base(0); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 7e988b0b0130..7fbea1bf7b48 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -383,7 +383,7 @@ static unsigned long do_fast_pm_gettimeoffset(void) } #endif -void __init au1xxx_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { unsigned int est_freq; diff --git a/arch/mips/au1000/csb250/Makefile b/arch/mips/au1000/csb250/Makefile deleted file mode 100644 index c0c4dcdccae8..000000000000 --- a/arch/mips/au1000/csb250/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2002 Cogent Computer Systems -# dan@embeddededge.com -# -# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500. -# - -obj-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/csb250/board_setup.c b/arch/mips/au1000/csb250/board_setup.c deleted file mode 100644 index 348c3024d3d1..000000000000 --- a/arch/mips/au1000/csb250/board_setup.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Cogent CSB250 board setup. - * - * Copyright 2002 Cogent Computer Systems, Inc. - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/keyboard.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/au1000.h> -#include <asm/csb250.h> - -extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int csb250_pci_idsel(unsigned int devsel, int assert); - -void __init board_setup(void) -{ - u32 pin_func, pin_val; - u32 sys_freqctrl, sys_clksrc; - - - // set AUX clock to 12MHz * 8 = 96 MHz - au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); - udelay(100); - -#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) - - /* GPIO201 is input for PCMCIA card detect */ - /* GPIO203 is input for PCMCIA interrupt request */ - au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR); - - /* zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* zero and disable USBH/USBD clocks */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; - - // FREQ2 = aux/2 = 48 MHz - sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* - * Route 48MHz FREQ2 into USB Host and/or Device - */ -#ifdef CONFIG_USB_OHCI - sys_clksrc |= ((4<<12) | (0<<11) | (0<<10)); -#endif -#ifdef CONFIG_AU1X00_USB_DEVICE - sys_clksrc |= ((4<<7) | (0<<6) | (0<<5)); -#endif - au_writel(sys_clksrc, SYS_CLKSRC); - - - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); -#ifndef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB host - pin_func |= 0x8000; -#endif - au_writel(pin_func, SYS_PINFUNC); -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) - - /* Configure GPIO2....it's used by PCI among other things. - */ - - /* Make everything but GP200 (PCI RST) an input until we get - * the pins set correctly. - */ - au_writel(0x00000001, GPIO2_DIR); - - /* Set the pins used for output. - * A zero bit will leave PCI reset, LEDs off, power up USB, - * IDSEL disabled. - */ - pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16)); - au_writel(pin_val, GPIO2_OUTPUT); - - /* Set the output direction. - */ - pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0)); - au_writel(pin_val, GPIO2_DIR); - -#ifdef CONFIG_PCI - /* Use FREQ1 for the PCI output clock. We use the - * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI. - * If Michael changes the CPU speed, we need to adjust - * that here as well :-). - */ - - /* zero and disable FREQ1 - */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0x000ffc00; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* zero and disable PCI clock - */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x000f8000; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Get current values (which really should match above). - */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0x000ffc00; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x000f8000; - - /* FREQ1 = cpu/12 = 32 MHz - */ - sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10)); - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Just connect the clock without further dividing. - */ - sys_clksrc |= ((3<<17) | (0<<16) | (0<<15)); - au_writel(sys_clksrc, SYS_CLKSRC); - - udelay(1); - - /* Now that clocks should be running, take PCI out of reset. - */ - pin_val = au_readl(GPIO2_OUTPUT); - pin_val |= ((1 << 16) | 1); - au_writel(pin_val, GPIO2_OUTPUT); - - // Setup PCI bus controller - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); - - /* We run big endian without any of the software byte swapping, - * so configure the PCI bridge to help us out. - */ - au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG); - - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); - - board_pci_idsel = csb250_pci_idsel; -#endif - - /* Enable sys bus clock divider when IDLE state or no bus activity. */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - -#ifdef CONFIG_RTC - // Enable the RTC if not already enabled - if (!(au_readl(0xac000028) & 0x20)) { - printk("enabling clock ...\n"); - au_writel((au_readl(0xac000028) | 0x20), 0xac000028); - } - // Put the clock in BCD mode - if (readl(0xac00002C) & 0x4) { /* reg B */ - au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); - au_sync(); - } -#endif -} - -/* The IDSEL is selected in the GPIO2 register. We will make device - * 12 appear in slot 0 and device 13 appear in slot 1. - */ -int -csb250_pci_idsel(unsigned int devsel, int assert) -{ - int retval; - unsigned int gpio2_pins; - - retval = 1; - - /* First, disable both selects, then assert the one requested. - */ - au_writel(0xc000c000, GPIO2_OUTPUT); - au_sync(); - - if (assert) { - if (devsel == 12) - gpio2_pins = 0x40000000; - else if (devsel == 13) - gpio2_pins = 0x80000000; - else { - gpio2_pins = 0xc000c000; - retval = 0; - } - au_writel(gpio2_pins, GPIO2_OUTPUT); - } - au_sync(); - - return retval; -} diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c deleted file mode 100644 index 83f1b31a0b8e..000000000000 --- a/arch/mips/au1000/csb250/init.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Cogent CSB250 board setup - * - * Copyright 2002 Cogent Computer Systems, Inc. - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -/* When we get initrd working someday......... -*/ -int my_initrd_start, my_initrd_size; - -/* Start arguments and environment. -*/ -static char *csb_env[2]; -static char *csb_arg[4]; -static char *arg1 = "console=ttyS3,38400"; -static char *arg2 = "root=/dev/nfs rw ip=any"; -static char *env1 = "ethaddr=00:30:23:50:00:00"; - -const char *get_system_type(void) -{ - return "Cogent CSB250"; -} - -int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -{ - unsigned char *memsize_str; - unsigned long memsize; - - /* We use a0 and a1 to pass initrd start and size. - */ - if (((unsigned int) argc > 0) && ((uint)argv > 0)) { - my_initrd_start = (unsigned int)argc; - my_initrd_size = (unsigned int)argv; - } - - /* First argv is ignored. - */ - prom_argc = 3; - prom_argv = csb_arg; - prom_envp = csb_env; - csb_arg[1] = arg1; - csb_arg[2] = arg2; - csb_env[0] = env1; - - mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_CSB250; - - prom_init_cmdline(); - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - memsize = 0x02000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } - add_memory_region(0, memsize, BOOT_MEM_RAM); - return 0; -} diff --git a/arch/mips/au1000/csb250/irqmap.c b/arch/mips/au1000/csb250/irqmap.c deleted file mode 100644 index 57d60401905e..000000000000 --- a/arch/mips/au1000/csb250/irqmap.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/au1000.h> - -au1xxx_irq_map_t __initdata au1xxx_irq_map[] = { - - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/hydrogen3/Makefile b/arch/mips/au1000/hydrogen3/Makefile deleted file mode 100644 index 974f79256bb3..000000000000 --- a/arch/mips/au1000/hydrogen3/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the Alchemy Semiconductor PB1000 board. -# - -obj-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/hydrogen3/board_setup.c b/arch/mips/au1000/hydrogen3/board_setup.c deleted file mode 100644 index d081640e2e00..000000000000 --- a/arch/mips/au1000/hydrogen3/board_setup.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/keyboard.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/au1000.h> - -void board_reset (void) -{ -} - -void __init board_setup(void) -{ - u32 pin_func; - -#ifdef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB device - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - au_writel(pin_func, SYS_PINFUNC); -#endif - -#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8)); - au_writel(pin_func, SYS_PINFUNC); - au_sync(); -#endif - - printk("AMD Alchemy Hydrogen3 Board\n"); -} diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c deleted file mode 100644 index 8f02bb80a55a..000000000000 --- a/arch/mips/au1000/hydrogen3/init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PB1000 board setup - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ -#ifdef CONFIG_MIPS_BOSPORUS - return "Alchemy Bosporus Gateway Reference"; -#else - return "Alchemy Db1x00"; -#endif -} - -int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = argc; - prom_argv = argv; - prom_envp = envp; - - mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_DB1000; /* set the platform # */ - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - memsize = 0x04000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } - add_memory_region(0, memsize, BOOT_MEM_RAM); - return 0; -} diff --git a/arch/mips/au1000/hydrogen3/irqmap.c b/arch/mips/au1000/hydrogen3/irqmap.c deleted file mode 100644 index 14e1ed37cf6b..000000000000 --- a/arch/mips/au1000/hydrogen3/irqmap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/au1000.h> - -au1xxx_irq_map_t __initdata au1xxx_irq_map[] = { - - /* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */ - { AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index 2d49f32f4622..f66779f0d4cd 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -148,7 +148,7 @@ static void pb1200_end_irq(unsigned int irq_nr) } } -static struct hw_interrupt_type external_irq_type = +static struct irq_chip external_irq_type = { #ifdef CONFIG_MIPS_PB1200 "Pb1200 Ext", |