diff options
Diffstat (limited to 'arch/microblaze')
| -rw-r--r-- | arch/microblaze/Kconfig | 4 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/setup.h | 3 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/system.h | 1 | ||||
| -rw-r--r-- | arch/microblaze/kernel/head.S | 98 | ||||
| -rw-r--r-- | arch/microblaze/kernel/setup.c | 11 | ||||
| -rw-r--r-- | arch/microblaze/mm/init.c | 14 |
6 files changed, 120 insertions, 11 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 86ae27871f41..d64c10093b40 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -259,6 +259,10 @@ config MICROBLAZE_32K_PAGES endchoice +config KERNEL_PAD + hex "Kernel PAD for unpacking" if ADVANCED_OPTIONS + default "0x80000" if MMU + endmenu source "mm/Kconfig" diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index 6c72ed7eba98..9f195c094731 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -39,7 +39,8 @@ extern void of_platform_reset_gpio_probe(void); void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt, unsigned int msr); + unsigned int fdt, unsigned int msr, unsigned int tlb0, + unsigned int tlb1); void machine_restart(char *cmd); void machine_shutdown(void); diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index 5a433cbaafb3..01228d2b1351 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -83,6 +83,7 @@ void default_idle(void); void free_init_pages(char *what, unsigned long begin, unsigned long end); void free_initmem(void); extern char *klimit; +extern unsigned long kernel_tlb; extern void ret_from_fork(void); extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 441dad80558c..49dd48f9e6ec 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -168,6 +168,53 @@ _invalidate: addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */ tophys(r4,r3) /* Load the kernel physical address */ + /* start to do TLB calculation */ + addik r12, r0, _end + rsub r12, r3, r12 + addik r12, r12, CONFIG_KERNEL_PAD /* that's the pad */ + + or r9, r0, r0 /* TLB0 = 0 */ + or r10, r0, r0 /* TLB1 = 0 */ + + addik r11, r12, -0x1000000 + bgei r11, GT16 /* size is greater than 16MB */ + addik r11, r12, -0x0800000 + bgei r11, GT8 /* size is greater than 8MB */ + addik r11, r12, -0x0400000 + bgei r11, GT4 /* size is greater than 4MB */ + /* size is less than 4MB */ + addik r11, r12, -0x0200000 + bgei r11, GT2 /* size is greater than 2MB */ + addik r9, r0, 0x0100000 /* TLB0 must be 1MB */ + addik r11, r12, -0x0100000 + bgei r11, GT1 /* size is greater than 1MB */ + /* TLB1 is 0 which is setup above */ + bri tlb_end +GT4: /* r11 contains the rest - will be either 1 or 4 */ + ori r9, r0, 0x400000 /* TLB0 is 4MB */ + bri TLB1 +GT16: /* TLB0 is 16MB */ + addik r9, r0, 0x1000000 /* means TLB0 is 16MB */ +TLB1: + /* must be used r2 because of substract if failed */ + addik r2, r11, -0x0400000 + bgei r2, GT20 /* size is greater than 16MB */ + /* size is >16MB and <20MB */ + addik r11, r11, -0x0100000 + bgei r11, GT17 /* size is greater than 17MB */ + /* kernel is >16MB and < 17MB */ +GT1: + addik r10, r0, 0x0100000 /* means TLB1 is 1MB */ + bri tlb_end +GT2: /* TLB0 is 0 and TLB1 will be 4MB */ +GT17: /* TLB1 is 4MB - kernel size <20MB */ + addik r10, r0, 0x0400000 /* means TLB1 is 4MB */ + bri tlb_end +GT8: /* TLB0 is still zero that's why I can use only TLB1 */ +GT20: /* TLB1 is 16MB - kernel size >20MB */ + addik r10, r0, 0x1000000 /* means TLB1 is 16MB */ +tlb_end: + /* * Configure and load two entries into TLB slots 0 and 1. * In case we are pinning TLBs, these are reserved in by the @@ -177,16 +224,56 @@ _invalidate: andi r4,r4,0xfffffc00 /* Mask off the real page number */ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ + /* TLB0 can be zeroes that's why we not setup it */ + beqi r9, jump_over + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r9, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: + ori r11, r30, 0 + andi r3,r3,0xfffffc00 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) + ori r3,r3,(TLB_VALID) + or r3, r3, r11 mts rtlbx,r0 /* TLB slow 0 */ mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ - addik r4, r4, 0x01000000 /* Map next 16 M entries */ - addik r3, r3, 0x01000000 +jump_over: + /* TLB1 can be zeroes that's why we not setup it */ + beqi r10, jump_over2 + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r10, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: + ori r12, r30, 0 + + addk r4, r4, r9 /* previous addr + TLB0 size */ + addk r3, r3, r9 + + andi r3,r3,0xfffffc00 /* Mask off the effective page number */ + ori r3,r3,(TLB_VALID) + or r3, r3, r12 ori r6,r0,1 /* TLB slot 1 */ mts rtlbx,r6 @@ -194,6 +281,7 @@ _invalidate: mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ +jump_over2: /* * Load a TLB entry for LMB, since we need access to * the exception vectors, using a 4k real==virtual mapping. @@ -237,8 +325,8 @@ start_here: * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - addik r9, r0, machine_early_init - brald r15, r9 + addik r11, r0, machine_early_init + brald r15, r11 nop #ifndef CONFIG_MMU diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 604cd9dd1333..a1fa2a5813bf 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -97,8 +97,11 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +unsigned long kernel_tlb; + void __init machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt, unsigned int msr) + unsigned int fdt, unsigned int msr, unsigned int tlb0, + unsigned int tlb1) { unsigned long *src, *dst; unsigned int offset = 0; @@ -145,6 +148,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif + /* setup kernel_tlb after BSS cleaning + * Maybe worth to move to asm code */ + kernel_tlb = tlb0 + tlb1; + /* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0, + tlb1, kernel_tlb); */ + printk("Ramdisk addr 0x%08x, ", ram); if (fdt) printk("FDT at 0x%08x\n", fdt); diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 95297b13dd9e..ce80823051ba 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -398,10 +398,16 @@ asmlinkage void __init mmu_init(void) machine_restart(NULL); } - if ((u32) memblock.memory.regions[0].size < 0x1000000) { - printk(KERN_EMERG "Memory must be greater than 16MB\n"); + if ((u32) memblock.memory.regions[0].size < 0x400000) { + printk(KERN_EMERG "Memory must be greater than 4MB\n"); machine_restart(NULL); } + + if ((u32) memblock.memory.regions[0].size < kernel_tlb) { + printk(KERN_EMERG "Kernel size is greater than memory node\n"); + machine_restart(NULL); + } + /* Find main memory where the kernel is */ memory_start = (u32) memblock.memory.regions[0].base; lowmem_size = memory_size = (u32) memblock.memory.regions[0].size; @@ -462,11 +468,11 @@ void __init *early_get_page(void) p = alloc_bootmem_pages(PAGE_SIZE); } else { /* - * Mem start + 32MB -> here is limit + * Mem start + kernel_tlb -> here is limit * because of mem mapping from head.S */ p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, - memory_start + 0x2000000)); + memory_start + kernel_tlb)); } return p; } |