summaryrefslogtreecommitdiff
path: root/arch/blackfin/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/kernel/setup.c')
-rw-r--r--arch/blackfin/kernel/setup.c218
1 files changed, 148 insertions, 70 deletions
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 71a9a8c53cea..b2a811347b65 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -13,6 +13,7 @@
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
+#include <linux/mm.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/pfn.h>
@@ -26,11 +27,10 @@
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
#include <asm/div64.h>
+#include <asm/cpu.h>
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
u16 _bfin_swrst;
EXPORT_SYMBOL(_bfin_swrst);
@@ -79,27 +79,68 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
-void __init bfin_cache_init(void)
-{
+DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data);
+
+static int early_init_clkin_hz(char *buf);
+
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
- generate_cplb_tables();
+void __init generate_cplb_tables(void)
+{
+ unsigned int cpu;
+
+ generate_cplb_tables_all();
+ /* Generate per-CPU I&D CPLB tables */
+ for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
+ generate_cplb_tables_cpu(cpu);
+}
#endif
+void __cpuinit bfin_setup_caches(unsigned int cpu)
+{
#ifdef CONFIG_BFIN_ICACHE
- bfin_icache_init();
- printk(KERN_INFO "Instruction Cache Enabled\n");
+ bfin_icache_init(icplb_tbl[cpu]);
#endif
#ifdef CONFIG_BFIN_DCACHE
- bfin_dcache_init();
- printk(KERN_INFO "Data Cache Enabled"
+ bfin_dcache_init(dcplb_tbl[cpu]);
+#endif
+
+ /*
+ * In cache coherence emulation mode, we need to have the
+ * D-cache enabled before running any atomic operation which
+ * might invove cache invalidation (i.e. spinlock, rwlock).
+ * So printk's are deferred until then.
+ */
+#ifdef CONFIG_BFIN_ICACHE
+ printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+#endif
+#ifdef CONFIG_BFIN_DCACHE
+ printk(KERN_INFO "Data Cache Enabled for CPU%u"
# if defined CONFIG_BFIN_WB
" (write-back)"
# elif defined CONFIG_BFIN_WT
" (write-through)"
# endif
- "\n");
+ "\n", cpu);
+#endif
+}
+
+void __cpuinit bfin_setup_cpudata(unsigned int cpu)
+{
+ struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
+
+ cpudata->idle = current;
+ cpudata->loops_per_jiffy = loops_per_jiffy;
+ cpudata->imemctl = bfin_read_IMEM_CONTROL();
+ cpudata->dmemctl = bfin_read_DMEM_CONTROL();
+}
+
+void __init bfin_cache_init(void)
+{
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+ generate_cplb_tables();
#endif
+ bfin_setup_caches(0);
}
void __init bfin_relocate_l1_mem(void)
@@ -109,6 +150,8 @@ void __init bfin_relocate_l1_mem(void)
unsigned long l1_data_b_length;
unsigned long l2_length;
+ blackfin_dma_early_init();
+
l1_code_length = _etext_l1 - _stext_l1;
if (l1_code_length > L1_CODE_LENGTH)
panic("L1 Instruction SRAM Overflow\n");
@@ -230,7 +273,7 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
/* record all known change-points (starting and ending addresses),
omitting those that are for empty memory regions */
chgidx = 0;
- for (i = 0; i < old_nr; i++) {
+ for (i = 0; i < old_nr; i++) {
if (map[i].size != 0) {
change_point[chgidx]->addr = map[i].addr;
change_point[chgidx++]->pentry = &map[i];
@@ -238,13 +281,13 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
change_point[chgidx++]->pentry = &map[i];
}
}
- chg_nr = chgidx; /* true number of change-points */
+ chg_nr = chgidx; /* true number of change-points */
/* sort change-point list by memory addresses (low -> high) */
still_changing = 1;
- while (still_changing) {
+ while (still_changing) {
still_changing = 0;
- for (i = 1; i < chg_nr; i++) {
+ for (i = 1; i < chg_nr; i++) {
/* if <current_addr> > <last_addr>, swap */
/* or, if current=<start_addr> & last=<end_addr>, swap */
if ((change_point[i]->addr < change_point[i-1]->addr) ||
@@ -261,10 +304,10 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
}
/* create a new memmap, removing overlaps */
- overlap_entries = 0; /* number of entries in the overlap table */
- new_entry = 0; /* index for creating new memmap entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_entry = 0; /* index for creating new memmap entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
/* loop through change-points, determining affect on the new memmap */
for (chgidx = 0; chgidx < chg_nr; chgidx++) {
/* keep track of all overlapping memmap entries */
@@ -286,14 +329,14 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
if (overlap_list[i]->type > current_type)
current_type = overlap_list[i]->type;
/* continue building up new memmap based on this information */
- if (current_type != last_type) {
+ if (current_type != last_type) {
if (last_type != 0) {
new_map[new_entry].size =
change_point[chgidx]->addr - last_addr;
/* move forward only if the new size was non-zero */
if (new_map[new_entry].size != 0)
if (++new_entry >= BFIN_MEMMAP_MAX)
- break; /* no more space left for new entries */
+ break; /* no more space left for new entries */
}
if (current_type != 0) {
new_map[new_entry].addr = change_point[chgidx]->addr;
@@ -303,9 +346,9 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
last_type = current_type;
}
}
- new_nr = new_entry; /* retain count for new entries */
+ new_nr = new_entry; /* retain count for new entries */
- /* copy new mapping into original location */
+ /* copy new mapping into original location */
memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
*pnr_map = new_nr;
@@ -361,7 +404,6 @@ static __init int parse_memmap(char *arg)
* - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
* @ from <start> to <start>+<mem>, type RAM
* $ from <start> to <start>+<mem>, type RESERVED
- *
*/
static __init void parse_cmdline_early(char *cmdline_p)
{
@@ -383,14 +425,15 @@ static __init void parse_cmdline_early(char *cmdline_p)
if (*to != ' ') {
if (*to == '$'
|| *(to + 1) == '$')
- reserved_mem_dcache_on =
- 1;
+ reserved_mem_dcache_on = 1;
if (*to == '#'
|| *(to + 1) == '#')
- reserved_mem_icache_on =
- 1;
+ reserved_mem_icache_on = 1;
}
}
+ } else if (!memcmp(to, "clkin_hz=", 9)) {
+ to += 9;
+ early_init_clkin_hz(to);
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
@@ -417,9 +460,8 @@ static __init void parse_cmdline_early(char *cmdline_p)
* [_ramend - DMA_UNCACHED_REGION,
* _ramend]: uncached DMA region
* [_ramend, physical_mem_end]: memory not managed by kernel
- *
*/
-static __init void memory_setup(void)
+static __init void memory_setup(void)
{
#ifdef CONFIG_MTD_UCLINUX
unsigned long mtd_phys = 0;
@@ -436,7 +478,7 @@ static __init void memory_setup(void)
memory_end = _ramend - DMA_UNCACHED_REGION;
#ifdef CONFIG_MPU
- /* Round up to multiple of 4MB. */
+ /* Round up to multiple of 4MB */
memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
#else
memory_start = PAGE_ALIGN(_ramstart);
@@ -616,7 +658,7 @@ static __init void setup_bootmem_allocator(void)
end_pfn = memory_end >> PAGE_SHIFT;
/*
- * give all the memory to the bootmap allocator, tell it to put the
+ * give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory.
*/
bootmap_size = init_bootmem_node(NODE_DATA(0),
@@ -791,7 +833,11 @@ void __init setup_arch(char **cmdline_p)
bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
#endif
+#ifdef CONFIG_SMP
+ if (_bfin_swrst & SWRST_DBL_FAULT_A) {
+#else
if (_bfin_swrst & RESET_DOUBLE) {
+#endif
printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* We assume the crashing kernel, and the current symbol table match */
@@ -823,9 +869,12 @@ void __init setup_arch(char **cmdline_p)
if (bfin_compiled_revid() == -1)
printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
bfin_revid());
- else if (bfin_compiled_revid() != 0xffff)
+ else if (bfin_compiled_revid() != 0xffff) {
printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
bfin_compiled_revid(), bfin_revid());
+ if (bfin_compiled_revid() > bfin_revid())
+ panic("Error: you are missing anomaly workarounds for this rev\n");
+ }
}
if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
@@ -835,7 +884,7 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
- cclk / 1000000, sclk / 1000000);
+ cclk / 1000000, sclk / 1000000);
if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
@@ -867,18 +916,21 @@ void __init setup_arch(char **cmdline_p)
BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
+#ifdef CONFIG_SMP
+ platform_init_cpus();
+#endif
init_exception_vectors();
- bfin_cache_init();
+ bfin_cache_init(); /* Initialize caches for the boot CPU */
}
static int __init topology_init(void)
{
- int cpu;
+ unsigned int cpu;
+ /* Record CPU-private information for the boot processor. */
+ bfin_setup_cpudata(0);
for_each_possible_cpu(cpu) {
- struct cpu *c = &per_cpu(cpu_devices, cpu);
-
- register_cpu(c, cpu);
+ register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
}
return 0;
@@ -886,36 +938,54 @@ static int __init topology_init(void)
subsys_initcall(topology_init);
+/* Get the input clock frequency */
+static u_long cached_clkin_hz = CONFIG_CLKIN_HZ;
+static u_long get_clkin_hz(void)
+{
+ return cached_clkin_hz;
+}
+static int __init early_init_clkin_hz(char *buf)
+{
+ cached_clkin_hz = simple_strtoul(buf, NULL, 0);
+#ifdef BFIN_KERNEL_CLOCK
+ if (cached_clkin_hz != CONFIG_CLKIN_HZ)
+ panic("cannot change clkin_hz when reprogramming clocks");
+#endif
+ return 1;
+}
+early_param("clkin_hz=", early_init_clkin_hz);
+
/* Get the voltage input multiplier */
-static u_long cached_vco_pll_ctl, cached_vco;
static u_long get_vco(void)
{
- u_long msel;
+ static u_long cached_vco;
+ u_long msel, pll_ctl;
- u_long pll_ctl = bfin_read_PLL_CTL();
- if (pll_ctl == cached_vco_pll_ctl)
+ /* The assumption here is that VCO never changes at runtime.
+ * If, someday, we support that, then we'll have to change this.
+ */
+ if (cached_vco)
return cached_vco;
- else
- cached_vco_pll_ctl = pll_ctl;
+ pll_ctl = bfin_read_PLL_CTL();
msel = (pll_ctl >> 9) & 0x3F;
if (0 == msel)
msel = 64;
- cached_vco = CONFIG_CLKIN_HZ;
+ cached_vco = get_clkin_hz();
cached_vco >>= (1 & pll_ctl); /* DF bit */
cached_vco *= msel;
return cached_vco;
}
/* Get the Core clock */
-static u_long cached_cclk_pll_div, cached_cclk;
u_long get_cclk(void)
{
+ static u_long cached_cclk_pll_div, cached_cclk;
u_long csel, ssel;
if (bfin_read_PLL_STAT() & 0x1)
- return CONFIG_CLKIN_HZ;
+ return get_clkin_hz();
ssel = bfin_read_PLL_DIV();
if (ssel == cached_cclk_pll_div)
@@ -934,21 +1004,21 @@ u_long get_cclk(void)
EXPORT_SYMBOL(get_cclk);
/* Get the System clock */
-static u_long cached_sclk_pll_div, cached_sclk;
u_long get_sclk(void)
{
+ static u_long cached_sclk;
u_long ssel;
- if (bfin_read_PLL_STAT() & 0x1)
- return CONFIG_CLKIN_HZ;
-
- ssel = bfin_read_PLL_DIV();
- if (ssel == cached_sclk_pll_div)
+ /* The assumption here is that SCLK never changes at runtime.
+ * If, someday, we support that, then we'll have to change this.
+ */
+ if (cached_sclk)
return cached_sclk;
- else
- cached_sclk_pll_div = ssel;
- ssel &= 0xf;
+ if (bfin_read_PLL_STAT() & 0x1)
+ return get_clkin_hz();
+
+ ssel = bfin_read_PLL_DIV() & 0xf;
if (0 == ssel) {
printk(KERN_WARNING "Invalid System Clock\n");
ssel = 1;
@@ -982,17 +1052,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
{
char *cpu, *mmu, *fpu, *vendor, *cache;
uint32_t revid;
-
- u_long cclk = 0, sclk = 0;
+ int cpu_num = *(unsigned int *)v;
+ u_long sclk, cclk;
u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
+ struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num);
cpu = CPU;
mmu = "none";
fpu = "none";
revid = bfin_revid();
- cclk = get_cclk();
sclk = get_sclk();
+ cclk = get_cclk();
switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
case 0xca:
@@ -1003,10 +1074,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
break;
}
- seq_printf(m, "processor\t: %d\n"
- "vendor_id\t: %s\n",
- *(unsigned int *)v,
- vendor);
+ seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor);
if (CPUID == bfin_cpuid())
seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
@@ -1029,12 +1097,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
- (loops_per_jiffy * HZ) / 500000,
- ((loops_per_jiffy * HZ) / 5000) % 100,
- (loops_per_jiffy * HZ));
+ (cpudata->loops_per_jiffy * HZ) / 500000,
+ ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
+ (cpudata->loops_per_jiffy * HZ));
/* Check Cache configutation */
- switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
case ACACHE_BSRAM:
cache = "dbank-A/B\t: cache/sram";
dcache_size = 16;
@@ -1058,10 +1126,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
/* Is it turned on? */
- if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
+ if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
dcache_size = 0;
- if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
+ if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB))
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
@@ -1086,8 +1154,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
"dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
BFIN_DLINES);
+#ifdef __ARCH_SYNC_CORE_DCACHE
+ seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
+#endif
#ifdef CONFIG_BFIN_ICACHE_LOCK
- switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
+ switch ((cpudata->imemctl >> 3) & WAYALL_L) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
break;
@@ -1137,6 +1208,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "No Ways are locked\n");
}
#endif
+
+ if (cpu_num != num_possible_cpus() - 1)
+ return 0;
+
+ if (L2_LENGTH)
+ seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
@@ -1144,6 +1221,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
((int)memory_end - (int)_stext) >> 10,
_stext,
(void *)memory_end);
+ seq_printf(m, "\n");
return 0;
}
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-27 18:10:51 +0000