diff options
Diffstat (limited to 'arch/arm')
54 files changed, 424 insertions, 211 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 78a647080ebc..199ebc1c4538 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -22,6 +22,7 @@ config ARM_PTDUMP_DEBUGFS config DEBUG_WX bool "Warn on W+X mappings at boot" + depends on MMU select ARM_PTDUMP_CORE ---help--- Generate a warning if any W+X mappings are found at boot. diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh index 1189598a25eb..5e7d758ebdd6 100755 --- a/arch/arm/boot/deflate_xip_data.sh +++ b/arch/arm/boot/deflate_xip_data.sh @@ -30,7 +30,7 @@ esac sym_val() { # extract hex value for symbol in $1 - local val=$($NM "$VMLINUX" | sed -n "/ $1$/{s/ .*$//p;q}") + local val=$($NM "$VMLINUX" 2>/dev/null | sed -n "/ $1\$/{s/ .*$//p;q}") [ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; } # convert from hex to decimal echo $((0x$val)) @@ -48,12 +48,12 @@ data_end=$(($_edata_loc - $base_offset)) file_end=$(stat -c "%s" "$XIPIMAGE") if [ "$file_end" != "$data_end" ]; then printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \ - $(($file_end + $base_offset)) $_edata_loc 2>&1 + $(($file_end + $base_offset)) $_edata_loc 1>&2 exit 1; fi # be ready to clean up -trap 'rm -f "$XIPIMAGE.tmp"' 0 1 2 3 +trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3 # substitute the data section by a compressed version $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b0d8431a3700..ae2b8c952e80 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -42,6 +42,11 @@ }; }; + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 40de3b66c33f..2477ebc11d9d 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -42,6 +42,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 18045c38bcf1..db7cded1b7ad 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -55,7 +55,7 @@ <0x3ff00100 0x100>; }; - smc@0x3404c000 { + smc@3404c000 { compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 6dde95f21cef..266f2611dc22 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -55,7 +55,7 @@ <0x3ff00100 0x100>; }; - smc@0x3404e000 { + smc@3404e000 { compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0e3d2a5ff208..a5c3824c8056 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -18,10 +18,10 @@ soc { ranges = <0x7e000000 0x20000000 0x02000000>; dma-ranges = <0x40000000 0x00000000 0x20000000>; + }; - arm-pmu { - compatible = "arm,arm1176-pmu"; - }; + arm-pmu { + compatible = "arm,arm1176-pmu"; }; }; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 1dfd76442777..c933e8413884 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -9,19 +9,19 @@ <0x40000000 0x40000000 0x00001000>; dma-ranges = <0xc0000000 0x00000000 0x3f000000>; - local_intc: local_intc { + local_intc: local_intc@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&local_intc>; }; + }; - arm-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupt-parent = <&local_intc>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; - }; + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; }; timer { diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index efa7d3387ab2..7704bb029605 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -8,7 +8,7 @@ <0x40000000 0x40000000 0x00001000>; dma-ranges = <0xc0000000 0x00000000 0x3f000000>; - local_intc: local_intc { + local_intc: local_intc@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 18db25a5a66e..9d293decf8d3 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -465,7 +465,7 @@ status = "disabled"; }; - aux: aux@0x7e215000 { + aux: aux@7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; reg = <0x7e215000 0x8>; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 6a44b8021702..f0e2008f7490 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -49,7 +49,7 @@ memory { device_type = "memory"; - reg = <0x60000000 0x80000000>; + reg = <0x60000000 0x20000000>; }; gpio-restart { diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 08568ce24d06..da8bb9d60f99 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -269,7 +269,7 @@ sata: sata@46000000 { /* The ROM uses this muxmode */ - cortina,gemini-ata-muxmode = <3>; + cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts index cf42c2f5cdc7..1281bc39b7ab 100644 --- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts @@ -42,7 +42,7 @@ /dts-v1/; -#include "imx6q.dtsi" +#include "imx6dl.dtsi" #include "imx6qdl-icore-rqs.dtsi" / { diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index a7a5dc7b2700..e7d2db839d70 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -82,7 +82,7 @@ enable-active-high; }; - reg_usb_otg2_vbus: regulator-usb-otg1-vbus { + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index c1aa7a4518fb..a30ee9fcb3ae 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -71,6 +71,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -189,7 +191,12 @@ >; }; - + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; }; &omap3_pmx_wkup { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index b50b796e15c7..47915447a826 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -66,6 +66,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -136,6 +138,12 @@ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; }; &uart2 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index ec2c8baef62a..592e17fd4eeb 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -47,7 +47,7 @@ gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ wakeup-source; autorepeat; - debounce_interval = <50>; + debounce-interval = <50>; }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 3b704cfed69a..a97458112ff6 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -280,7 +280,7 @@ max-frequency = <37500000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; resets = <&cru SRST_SDIO>; @@ -298,7 +298,7 @@ max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 780ec3a99b21..341deaf62ff6 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -621,7 +621,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; @@ -634,7 +634,7 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; @@ -649,7 +649,7 @@ max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; bus-width = <8>; default-sample-phase = <158>; fifo-depth = <0x100>; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index 99cfae875e12..5eae4776ffde 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -110,26 +110,6 @@ }; }; -&cpu0 { - cpu0-supply = <&vdd_cpu>; - operating-points = < - /* KHz uV */ - 1800000 1400000 - 1608000 1350000 - 1512000 1300000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 312000 900000 - 216000 900000 - 126000 900000 - >; -}; - &emmc { status = "okay"; bus-width = <8>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6102e4e7f35c..354aff45c1af 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -927,6 +927,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1176,6 +1177,7 @@ compatible = "rockchip,rk3288-dw-hdmi"; reg = <0x0 0xff980000 0x0 0x20000>; reg-io-width = <4>; + #sound-dai-cells = <0>; rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -163,6 +163,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; @@ -193,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -233,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 8a74efdb6360..240e7a23d81f 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -56,7 +56,7 @@ clocks = <&topclk ZX296702_A9_PERIPHCLK>; }; - l2cc: l2-cache-controller@0x00c00000 { + l2cc: l2-cache-controller@c00000 { compatible = "arm,pl310-cache"; reg = <0x00c00000 0x1000>; cache-unified; @@ -67,30 +67,30 @@ arm,double-linefill-incr = <0>; }; - pcu: pcu@0xa0008000 { + pcu: pcu@a0008000 { compatible = "zte,zx296702-pcu"; reg = <0xa0008000 0x1000>; }; - topclk: topclk@0x09800000 { + topclk: topclk@9800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; - lsp1clk: lsp1clk@0x09400000 { + lsp1clk: lsp1clk@9400000 { compatible = "zte,zx296702-lsp1crpm-clk"; reg = <0x09400000 0x1000>; #clock-cells = <1>; }; - lsp0clk: lsp0clk@0x0b000000 { + lsp0clk: lsp0clk@b000000 { compatible = "zte,zx296702-lsp0crpm-clk"; reg = <0x0b000000 0x1000>; #clock-cells = <1>; }; - uart0: serial@0x09405000 { + uart0: serial@9405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -98,7 +98,7 @@ status = "disabled"; }; - uart1: serial@0x09406000 { + uart1: serial@9406000 { compatible = "zte,zx296702-uart"; reg = <0x09406000 0x1000>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -106,7 +106,7 @@ status = "disabled"; }; - mmc0: mmc@0x09408000 { + mmc0: mmc@9408000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -119,7 +119,7 @@ status = "disabled"; }; - mmc1: mmc@0x0b003000 { + mmc1: mmc@b003000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -132,7 +132,7 @@ status = "disabled"; }; - sysctrl: sysctrl@0xa0007000 { + sysctrl: sysctrl@a0007000 { compatible = "zte,sysctrl", "syscon"; reg = <0xa0007000 0x1000>; }; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 2f145c4af93a..92674f247a12 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -319,7 +319,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_RC_CORE=m CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_LIRC=m +CONFIG_LIRC=y CONFIG_RC_DEVICES=y CONFIG_IR_RX51=m CONFIG_V4L_PLATFORM_DRIVERS=y diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h index 9c99e817535e..5b85889f82ee 100644 --- a/arch/arm/include/asm/vdso.h +++ b/arch/arm/include/asm/vdso.h @@ -12,8 +12,6 @@ struct mm_struct; void arm_install_vdso(struct mm_struct *mm, unsigned long addr); -extern char vdso_start, vdso_end; - extern unsigned int vdso_total_pages; #else /* CONFIG_VDSO */ diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 629f8e9981f1..cf2701cb0de8 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -83,7 +83,7 @@ static void dummy_clock_access(struct timespec64 *ts) } static clock_access_fn __read_persistent_clock = dummy_clock_access; -static clock_access_fn __read_boot_clock = dummy_clock_access;; +static clock_access_fn __read_boot_clock = dummy_clock_access; void read_persistent_clock64(struct timespec64 *ts) { diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index a4d6dc0f2427..f4dd7f9663c1 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -39,6 +39,8 @@ static struct page **vdso_text_pagelist; +extern char vdso_start[], vdso_end[]; + /* Total number of pages needed for the data and text portions of the VDSO. */ unsigned int vdso_total_pages __ro_after_init; @@ -197,13 +199,13 @@ static int __init vdso_init(void) unsigned int text_pages; int i; - if (memcmp(&vdso_start, "\177ELF", 4)) { + if (memcmp(vdso_start, "\177ELF", 4)) { pr_err("VDSO is not a valid ELF object!\n"); return -ENOEXEC; } - text_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT; - pr_debug("vdso: %i text pages at base %p\n", text_pages, &vdso_start); + text_pages = (vdso_end - vdso_start) >> PAGE_SHIFT; + pr_debug("vdso: %i text pages at base %p\n", text_pages, vdso_start); /* Allocate the VDSO text pagelist */ vdso_text_pagelist = kcalloc(text_pages, sizeof(struct page *), @@ -218,7 +220,7 @@ static int __init vdso_init(void) for (i = 0; i < text_pages; i++) { struct page *page; - page = virt_to_page(&vdso_start + i * PAGE_SIZE); + page = virt_to_page(vdso_start + i * PAGE_SIZE); vdso_text_pagelist[i] = page; } @@ -229,7 +231,7 @@ static int __init vdso_init(void) cntvct_ok = cntvct_functional(); - patch_vdso(&vdso_start); + patch_vdso(vdso_start); return 0; } diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile index 5638ce0c9524..63d6b404d88e 100644 --- a/arch/arm/kvm/hyp/Makefile +++ b/arch/arm/kvm/hyp/Makefile @@ -7,6 +7,8 @@ ccflags-y += -fno-stack-protector -DDISABLE_BRANCH_PROFILING KVM=../../../../virt/kvm +CFLAGS_ARMV7VE :=$(call cc-option, -march=armv7ve) + obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o @@ -15,7 +17,10 @@ obj-$(CONFIG_KVM_ARM_HOST) += tlb.o obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o obj-$(CONFIG_KVM_ARM_HOST) += vfp.o obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o +CFLAGS_banked-sr.o += $(CFLAGS_ARMV7VE) + obj-$(CONFIG_KVM_ARM_HOST) += entry.o obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o obj-$(CONFIG_KVM_ARM_HOST) += switch.o +CFLAGS_switch.o += $(CFLAGS_ARMV7VE) obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c index 111bda8cdebd..be4b8b0a40ad 100644 --- a/arch/arm/kvm/hyp/banked-sr.c +++ b/arch/arm/kvm/hyp/banked-sr.c @@ -20,6 +20,10 @@ #include <asm/kvm_hyp.h> +/* + * gcc before 4.9 doesn't understand -march=armv7ve, so we have to + * trick the assembler. + */ __asm__(".arch_extension virt"); void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt) diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c index ee1f83b1a332..4c89a8e9a2e3 100644 --- a/arch/arm/mach-clps711x/board-dt.c +++ b/arch/arm/mach-clps711x/board-dt.c @@ -69,7 +69,7 @@ static void clps711x_restart(enum reboot_mode mode, const char *cmd) soft_restart(0); } -static const char *clps711x_compat[] __initconst = { +static const char *const clps711x_compat[] __initconst = { "cirrus,ep7209", NULL }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index e457f299cd44..d6b11907380c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -368,7 +368,7 @@ static struct spi_eeprom at25640a = { .flags = EE_ADDR2, }; -static struct spi_board_info dm355_evm_spi_info[] __initconst = { +static const struct spi_board_info dm355_evm_spi_info[] __initconst = { { .modalias = "at25", .platform_data = &at25640a, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index be997243447b..fad9a5611a5d 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -217,7 +217,7 @@ static struct spi_eeprom at25640a = { .flags = EE_ADDR2, }; -static struct spi_board_info dm355_leopard_spi_info[] __initconst = { +static const struct spi_board_info dm355_leopard_spi_info[] __initconst = { { .modalias = "at25", .platform_data = &at25640a, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e75741fb2c1d..e3780986d2a3 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -726,7 +726,7 @@ static struct spi_eeprom at25640 = { .flags = EE_ADDR2, }; -static struct spi_board_info dm365_evm_spi_info[] __initconst = { +static const struct spi_board_info dm365_evm_spi_info[] __initconst = { { .modalias = "at25", .platform_data = &at25640, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index a3e78074be70..62eb7d668890 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -127,8 +127,8 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/ - GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW), }, }; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6b32dc527edc..2c20599cc350 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -41,7 +41,7 @@ config MACH_ARMADA_375 depends on ARCH_MULTI_V7 select ARMADA_370_XP_IRQ select ARM_ERRATA_720789 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK select HAVE_ARM_SCU @@ -57,7 +57,7 @@ config MACH_ARMADA_38X bool "Marvell Armada 380/385 boards" depends on ARCH_MULTI_V7 select ARM_ERRATA_720789 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_GIC select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 43e3e188f521..fa512413a471 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1011,17 +1011,17 @@ static int clk_debugfs_register_one(struct clk *c) return -ENOMEM; c->dent = d; - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount); if (!d) { err = -ENOMEM; goto err_out; } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate); if (!d) { err = -ENOMEM; goto err_out; } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags); if (!d) { err = -ENOMEM; goto err_out; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 4bb6751864a5..fc5fb776a710 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -299,8 +299,6 @@ static void irq_save_context(void) if (soc_is_dra7xx()) return; - if (!sar_base) - sar_base = omap4_get_sar_ram_base(); if (wakeupgen_ops && wakeupgen_ops->save_context) wakeupgen_ops->save_context(); } @@ -598,6 +596,8 @@ static int __init wakeupgen_init(struct device_node *node, irq_hotplug_init(); irq_pm_init(); + sar_base = omap4_get_sar_ram_base(); + return 0; } IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 124f9af34a15..34156eca8e23 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -977,6 +977,9 @@ static int _enable_clocks(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name); + if (oh->flags & HWMOD_OPT_CLKS_NEEDED) + _enable_optional_clocks(oh); + if (oh->_clk) clk_enable(oh->_clk); @@ -985,9 +988,6 @@ static int _enable_clocks(struct omap_hwmod *oh) clk_enable(os->_clk); } - if (oh->flags & HWMOD_OPT_CLKS_NEEDED) - _enable_optional_clocks(oh); - /* The opt clocks are controlled by the device driver. */ return 0; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 366158a54fcd..6f68576e5695 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -186,7 +186,7 @@ static void omap_pm_end(void) cpu_idle_poll_ctrl(false); } -static void omap_pm_finish(void) +static void omap_pm_wake(void) { if (soc_is_omap34xx()) omap_prcm_irq_complete(); @@ -196,7 +196,7 @@ static const struct platform_suspend_ops omap_pm_ops = { .begin = omap_pm_begin, .end = omap_pm_end, .enter = omap_pm_enter, - .finish = omap_pm_finish, + .wake = omap_pm_wake, .valid = suspend_valid_only_mem, }; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index ece09c9461f7..d61fbd7a2840 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -156,12 +156,6 @@ static struct clock_event_device clockevent_gpt = { .tick_resume = omap2_gp_timer_shutdown, }; -static struct property device_disabled = { - .name = "status", - .length = sizeof("disabled"), - .value = "disabled", -}; - static const struct of_device_id omap_timer_match[] __initconst = { { .compatible = "ti,omap2420-timer", }, { .compatible = "ti,omap3430-timer", }, @@ -203,8 +197,17 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * of_get_property(np, "ti,timer-secure", NULL))) continue; - if (!of_device_is_compatible(np, "ti,omap-counter32k")) - of_add_property(np, &device_disabled); + if (!of_device_is_compatible(np, "ti,omap-counter32k")) { + struct property *prop; + + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + if (!prop) + return NULL; + prop->name = "status"; + prop->value = "disabled"; + prop->length = strlen(prop->value); + of_add_property(np, prop); + } return np; } diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2a7bb6ccdcb7..a810f4dd34b1 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -58,7 +58,6 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" - select GENERIC_NET_UTILS select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the @@ -66,7 +65,6 @@ config MACH_DNS323 config MACH_TS209 bool "QNAP TS-109/TS-209" - select GENERIC_NET_UTILS help Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. @@ -101,7 +99,6 @@ config MACH_LINKSTATION_LS_HGL config MACH_TS409 bool "QNAP TS-409" - select GENERIC_NET_UTILS help Say 'Y' here if you want your kernel to support the QNAP TS-409 platform. diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index cd483bfb5ca8..d13344b2ddcd 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -173,10 +173,42 @@ static struct mv643xx_eth_platform_data dns323_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; +/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these + * functions be kept somewhere? + */ +static int __init dns323_parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init dns323_parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = dns323_parse_hex_nibble(b[0]); + lo = dns323_parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + static int __init dns323_read_mac_addr(void) { u_int8_t addr[6]; - void __iomem *mac_page; + int i; + char *mac_page; /* MAC address is stored as a regular ol' string in /dev/mtdblock4 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). @@ -185,8 +217,23 @@ static int __init dns323_read_mac_addr(void) if (!mac_page) return -ENOMEM; - if (!mac_pton((__force const char *) mac_page, addr)) - goto error_fail; + /* Sanity check the string we're looking at */ + for (i = 0; i < 5; i++) { + if (*(mac_page + (i * 3) + 2) != ':') { + goto error_fail; + } + } + + for (i = 0; i < 6; i++) { + int byte; + + byte = dns323_parse_hex_byte(mac_page + (i * 3)); + if (byte < 0) { + goto error_fail; + } + + addr[i] = byte; + } iounmap(mac_page); printk("DNS-323: Found ethernet MAC address: %pM\n", addr); diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index 89774985d380..905d4f2dd0b8 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -53,12 +53,53 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; +static int __init qnap_tsx09_parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init qnap_tsx09_parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = qnap_tsx09_parse_hex_nibble(b[0]); + lo = qnap_tsx09_parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + static int __init qnap_tsx09_check_mac_addr(const char *addr_str) { u_int8_t addr[6]; + int i; - if (!mac_pton(addr_str, addr)) - return -1; + for (i = 0; i < 6; i++) { + int byte; + + /* + * Enforce "xx:xx:xx:xx:xx:xx\n" format. + */ + if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) + return -1; + + byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3)); + if (byte < 0) + return -1; + addr[i] = byte; + } printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); @@ -77,12 +118,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size) unsigned long addr; for (addr = mem_base; addr < (mem_base + size); addr += 1024) { - void __iomem *nor_page; + char *nor_page; int ret = 0; nor_page = ioremap(addr, 1024); if (nor_page != NULL) { - ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page); + ret = qnap_tsx09_check_mac_addr(nor_page); iounmap(nor_page); } diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index c487401b6fdb..69d7f48a4183 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -23,6 +23,7 @@ #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/dm9000.h> #include <linux/leds.h> #include <linux/platform_data/rtc-v3020.h> @@ -343,9 +344,6 @@ static inline void cm_x300_init_bl(void) {} #define LCD_SPI_BUS_NUM (1) static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = { - .sck = GPIO_LCD_SCL, - .mosi = GPIO_LCD_DIN, - .miso = GPIO_LCD_DOUT, .num_chipselect = 1, }; @@ -357,6 +355,21 @@ static struct platform_device cm_x300_spi_gpio = { }, }; +static struct gpiod_lookup_table cm_x300_spi_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL, + "sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN, + "mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT, + "miso", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS, + "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct tdo24m_platform_data cm_x300_tdo24m_pdata = { .model = TDO35S, }; @@ -367,7 +380,6 @@ static struct spi_board_info cm_x300_spi_devices[] __initdata = { .max_speed_hz = 1000000, .bus_num = LCD_SPI_BUS_NUM, .chip_select = 0, - .controller_data = (void *) GPIO_LCD_CS, .platform_data = &cm_x300_tdo24m_pdata, }, }; @@ -376,6 +388,7 @@ static void __init cm_x300_init_spi(void) { spi_register_board_info(cm_x300_spi_devices, ARRAY_SIZE(cm_x300_spi_devices)); + gpiod_add_lookup_table(&cm_x300_spi_gpiod_table); platform_device_register(&cm_x300_spi_gpio); } #else diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 4d5d05cf87d6..e7ac7dcb95e9 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -646,9 +646,6 @@ static void __init raumfeld_lcd_init(void) */ static struct spi_gpio_platform_data raumfeld_spi_platform_data = { - .sck = GPIO_SPI_CLK, - .mosi = GPIO_SPI_MOSI, - .miso = GPIO_SPI_MISO, .num_chipselect = 3, }; @@ -660,6 +657,25 @@ static struct platform_device raumfeld_spi_device = { } }; +static struct gpiod_lookup_table raumfeld_spi_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK, + "sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI, + "mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO, + "miso", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS, + "cs", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS, + "cs", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS, + "cs", 2, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct lis3lv02d_platform_data lis3_pdata = { .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | @@ -680,7 +696,6 @@ static struct lis3lv02d_platform_data lis3_pdata = { .max_speed_hz = 10000, \ .bus_num = 0, \ .chip_select = 0, \ - .controller_data = (void *) GPIO_SPDIF_CS, \ } #define SPI_LIS3 \ @@ -689,7 +704,6 @@ static struct lis3lv02d_platform_data lis3_pdata = { .max_speed_hz = 1000000, \ .bus_num = 0, \ .chip_select = 1, \ - .controller_data = (void *) GPIO_ACCEL_CS, \ .platform_data = &lis3_pdata, \ .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ } @@ -700,7 +714,6 @@ static struct lis3lv02d_platform_data lis3_pdata = { .max_speed_hz = 1000000, \ .bus_num = 0, \ .chip_select = 2, \ - .controller_data = (void *) GPIO_MCLK_DAC_CS, \ } static struct spi_board_info connector_spi_devices[] __initdata = { @@ -1066,6 +1079,7 @@ static void __init raumfeld_common_init(void) else gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); + gpiod_add_lookup_table(&raumfeld_spi_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices)); i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); } diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index a3ddbbbd6d92..59589a4a0d4b 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -12,6 +12,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/serial_s3c.h> @@ -388,32 +389,53 @@ static struct ili9320_platdata jive_lcm_config = { /* LCD SPI support */ static struct spi_gpio_platform_data jive_lcd_spi = { - .sck = S3C2410_GPG(8), - .mosi = S3C2410_GPB(8), - .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, }; static struct platform_device jive_device_lcdspi = { - .name = "spi-gpio", + .name = "spi_gpio", .id = 1, .dev.platform_data = &jive_lcd_spi, }; +static struct gpiod_lookup_table jive_lcdspi_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("GPIOG", 8, + "sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 8, + "mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 7, + "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; /* WM8750 audio code SPI definition */ static struct spi_gpio_platform_data jive_wm8750_spi = { - .sck = S3C2410_GPB(4), - .mosi = S3C2410_GPB(9), - .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, }; static struct platform_device jive_device_wm8750 = { - .name = "spi-gpio", + .name = "spi_gpio", .id = 2, .dev.platform_data = &jive_wm8750_spi, }; +static struct gpiod_lookup_table jive_wm8750_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("GPIOB", 4, + "gpio-sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 9, + "gpio-mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOH", 10, + "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* JIVE SPI devices. */ static struct spi_board_info __initdata jive_spi_devs[] = { @@ -424,14 +446,12 @@ static struct spi_board_info __initdata jive_spi_devs[] = { .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */ .max_speed_hz = 100000, .platform_data = &jive_lcm_config, - .controller_data = (void *)S3C2410_GPB(7), }, { .modalias = "WM8750", .bus_num = 2, .chip_select = 0, .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */ .max_speed_hz = 100000, - .controller_data = (void *)S3C2410_GPH(10), }, }; @@ -619,25 +639,12 @@ static void __init jive_machine_init(void) /** TODO - check that this is after the cmdline option! */ s3c_nand_set_platdata(&jive_nand_info); - /* initialise the spi */ - gpio_request(S3C2410_GPG(13), "lcm reset"); gpio_direction_output(S3C2410_GPG(13), 0); - gpio_request(S3C2410_GPB(7), "jive spi"); - gpio_direction_output(S3C2410_GPB(7), 1); - gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL); gpio_free(S3C2410_GPB(6)); - gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPG(8)); - - /* initialise the WM8750 spi */ - - gpio_request(S3C2410_GPH(10), "jive wm8750 spi"); - gpio_direction_output(S3C2410_GPH(10), 1); - /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -655,6 +662,8 @@ static void __init jive_machine_init(void) pm_power_off = jive_power_off; + gpiod_add_lookup_table(&jive_lcdspi_gpiod_table); + gpiod_add_lookup_table(&jive_wm8750_gpiod_table); platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); } diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 9c8373b8d9c3..5d48e5b6e738 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -11,6 +11,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> @@ -194,17 +195,30 @@ static struct platform_device qt2410_led = { /* SPI */ static struct spi_gpio_platform_data spi_gpio_cfg = { - .sck = S3C2410_GPG(7), - .mosi = S3C2410_GPG(6), - .miso = S3C2410_GPG(5), + .num_chipselect = 1, }; static struct platform_device qt2410_spi = { - .name = "spi-gpio", + .name = "spi_gpio", .id = 1, .dev.platform_data = &spi_gpio_cfg, }; +static struct gpiod_lookup_table qt2410_spi_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("GPIOG", 7, + "sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOG", 6, + "mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOG", 5, + "miso", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 5, + "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* Board devices */ static struct platform_device *qt2410_devices[] __initdata = { @@ -323,9 +337,7 @@ static void __init qt2410_machine_init(void) s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); - WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs")); - gpio_direction_output(S3C2410_GPB(5), 1); - + gpiod_add_lookup_table(&qt2410_spi_gpiod_table); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 5655fe968b1f..951208f168e7 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -206,17 +206,30 @@ static int __init smartq_lcd_setup_gpio(void) /* GPM0 -> CS */ static struct spi_gpio_platform_data smartq_lcd_control = { - .sck = S3C64XX_GPM(1), - .mosi = S3C64XX_GPM(2), - .miso = S3C64XX_GPM(2), + .num_chipselect = 1, }; static struct platform_device smartq_lcd_control_device = { - .name = "spi-gpio", + .name = "spi_gpio", .id = 1, .dev.platform_data = &smartq_lcd_control, }; +static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = { + .dev_id = "spi_gpio", + .table = { + GPIO_LOOKUP("GPIOM", 1, + "sck", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOM", 2, + "mosi", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOM", 3, + "miso", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOM", 0, + "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { gpio_direction_output(S3C64XX_GPM(3), power); @@ -404,6 +417,7 @@ void __init smartq_machine_init(void) WARN_ON(smartq_wifi_init()); pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup)); + gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); gpiod_add_lookup_table(&smartq_audio_gpios); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 57058ac46f49..36cd23c8be9b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -23,7 +23,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/perf/arm_pmu.h> #include <linux/regulator/machine.h> #include <asm/outercache.h> @@ -112,37 +111,6 @@ static void ux500_restart(enum reboot_mode mode, const char *cmd) prcmu_system_reset(0); } -/* - * The PMU IRQ lines of two cores are wired together into a single interrupt. - * Bounce the interrupt to the other core if it's not ours. - */ -static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) -{ - irqreturn_t ret = handler(irq, dev); - int other = !smp_processor_id(); - - if (ret == IRQ_NONE && cpu_online(other)) - irq_set_affinity(irq, cpumask_of(other)); - - /* - * We should be able to get away with the amount of IRQ_NONEs we give, - * while still having the spurious IRQ detection code kick in if the - * interrupt really starts hitting spuriously. - */ - return ret; -} - -static struct arm_pmu_platdata db8500_pmu_platdata = { - .handle_irq = db8500_pmu_handler, - .irq_flags = IRQF_NOBALANCING | IRQF_NO_THREAD, -}; - -static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { - /* Requires call-back bindings. */ - OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), - {}, -}; - static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), {}, @@ -167,7 +135,7 @@ static void __init u8500_init_machine(void) u8540_auxdata_lookup, NULL); else of_platform_populate(NULL, u8500_local_bus_nodes, - u8500_auxdata_lookup, NULL); + NULL, NULL); } static const char * stericsson_dt_platform_compat[] = { diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index d443e481c3e9..8805a59bae53 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -888,11 +888,8 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->irq = irq->start; timer->pdev = pdev; - /* Skip pm_runtime_enable for OMAP1 */ - if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { - pm_runtime_enable(dev); - pm_runtime_irq_safe(dev); - } + pm_runtime_enable(dev); + pm_runtime_irq_safe(dev); if (!timer->reserved) { ret = pm_runtime_get_sync(dev); diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index fb061cf0d736..30a07730807a 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -5,13 +5,4 @@ void omap_map_sram(unsigned long start, unsigned long size, unsigned long skip, int cached); void omap_sram_reset(void); -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) +extern void *omap_sram_push(void *funcp, unsigned long size); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index a5bc92d7e476..921840acf65c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -23,6 +23,7 @@ #include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> +#include <asm/set_memory.h> #include <asm/mach/map.h> @@ -42,7 +43,7 @@ static void __iomem *omap_sram_ceil; * Note that fncpy requires the returned address to be aligned * to an 8-byte boundary. */ -void *omap_sram_push_address(unsigned long size) +static void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; @@ -60,6 +61,30 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } +void *omap_sram_push(void *funcp, unsigned long size) +{ + void *sram; + unsigned long base; + int pages; + void *dst = NULL; + + sram = omap_sram_push_address(size); + if (!sram) + return NULL; + + base = (unsigned long)sram & PAGE_MASK; + pages = PAGE_ALIGN(size) / PAGE_SIZE; + + set_memory_rw(base, pages); + + dst = fncpy(sram, funcp, size); + + set_memory_ro(base, pages); + set_memory_x(base, pages); + + return dst; +} + /* * The SRAM context is lost during off-idle and stack * needs to be reset. @@ -75,6 +100,9 @@ void omap_sram_reset(void) void __init omap_map_sram(unsigned long start, unsigned long size, unsigned long skip, int cached) { + unsigned long base; + int pages; + if (size == 0) return; @@ -95,4 +123,10 @@ void __init omap_map_sram(unsigned long start, unsigned long size, */ memset_io(omap_sram_base + omap_sram_skip, 0, omap_sram_size - omap_sram_skip); + + base = (unsigned long)omap_sram_base; + pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; + + set_memory_ro(base, pages); + set_memory_x(base, pages); } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index aff6994950ba..a2399fd66e97 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, /***************************************************************************** * Ethernet switch ****************************************************************************/ -static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii"; -static __initdata struct mdio_board_info - orion_ge00_switch_board_info; +static __initdata struct mdio_board_info orion_ge00_switch_board_info = { + .bus_id = "orion-mii", + .modalias = "mv88e6085", +}; void __init orion_ge00_switch_init(struct dsa_chip_data *d) { - struct mdio_board_info *bd; unsigned int i; if (!IS_BUILTIN(CONFIG_PHYLIB)) return; - for (i = 0; i < ARRAY_SIZE(d->port_names); i++) - if (!strcmp(d->port_names[i], "cpu")) + for (i = 0; i < ARRAY_SIZE(d->port_names); i++) { + if (!strcmp(d->port_names[i], "cpu")) { + d->netdev[i] = &orion_ge00.dev; break; + } + } - bd = &orion_ge00_switch_board_info; - bd->bus_id = orion_ge00_mvmdio_bus_name; - bd->mdio_addr = d->sw_addr; - d->netdev[i] = &orion_ge00.dev; - strcpy(bd->modalias, "mv88e6085"); - bd->platform_data = d; + orion_ge00_switch_board_info.mdio_addr = d->sw_addr; + orion_ge00_switch_board_info.platform_data = d; mdiobus_register_board_info(&orion_ge00_switch_board_info, 1); } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 03c6a3c72f9c..4c375e11ae95 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -648,7 +648,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, */ static int vfp_dying_cpu(unsigned int cpu) { - vfp_force_reload(cpu, current_thread_info()); + vfp_current_hw_state[cpu] = NULL; return 0; } |