diff options
Diffstat (limited to 'arch/arm')
124 files changed, 771 insertions, 449 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87b63fde06d7..88acf8bc1490 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,6 +6,7 @@ config ARM select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF select ARCH_WANT_IPC_PARSE_VERSION @@ -175,13 +176,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config ARCH_HAS_CPUFREQ - bool - help - Internal node to signify that the ARCH has CPUFREQ support - and that the relevant menu configurations are displayed for - it. - config ARCH_HAS_BANDGAP bool @@ -318,7 +312,6 @@ config ARCH_MULTIPLATFORM config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARCH_HAS_CPUFREQ select ARM_AMBA select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -538,7 +531,6 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS @@ -637,7 +629,6 @@ config ARCH_LPC32XX config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -707,7 +698,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE @@ -725,7 +715,6 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP @@ -746,7 +735,6 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC @@ -809,7 +797,6 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select ATAGS @@ -845,7 +832,6 @@ config ARCH_DAVINCI config ARCH_OMAP1 bool "TI OMAP1" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -1009,8 +995,6 @@ source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -source "arch/arm/plat-samsung/Kconfig" - source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-spear/Kconfig" @@ -1028,6 +1012,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -2109,9 +2094,7 @@ endmenu menu "CPU Power Management" -if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..adb5ed9e269e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020-revE.dtb + stih416-b2020e.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf5..e2156a583de7 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524c..80a3b215e7d6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd7..a1a0cc5eb35c 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 19f1f7e87597..90098f98a5c8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -319,6 +319,10 @@ phy-mode = "rmii"; }; +&phy_sel { + rmii-clock-ext; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 772fec2d26ce..1e2919d43d78 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -91,6 +91,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index e69bc6759c39..4173a8ab34e7 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 380 family SoC"; - compatible = "marvell,armada380", "marvell,armada38x"; + compatible = "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index ff9637dd8d0f..1af886f1e486 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; @@ -98,6 +98,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 40893255a3f0..aaca2861dc87 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -17,7 +17,7 @@ / { model = "Marvell Armada 385 Reference Design"; - compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f011009bf4cf..6283d7912f71 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 family SoC"; - compatible = "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,armada385", "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3de364e81b52..689fa1a46728 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -20,7 +20,7 @@ / { model = "Marvell Armada 38x family SoC"; - compatible = "marvell,armada38x"; + compatible = "marvell,armada380"; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e5c6a0492ca0..4e5a59ee1501 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; soc { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index b309c1c6e848..04927db1d6bf 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,24 +568,17 @@ #size-cells = <0>; #interrupt-cells = <1>; - slow_rc_osc: slow_rc_osc { - compatible = "fixed-clock"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9260-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_xtal>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; + clocks = <&main_osc>; }; plla: pllack { @@ -615,7 +608,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; atmel,clk-divisors = <1 2 4 0>; }; @@ -632,7 +625,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; prog0: prog0 { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c6683ea8b743..aa35a7aec9a8 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + main_xtal { clock-frequency = <18432000>; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index d1b82e6635d5..287795985e32 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -132,8 +132,8 @@ <595000000 650000000 3 0>, <545000000 600000000 0 1>, <495000000 555000000 1 1>, - <445000000 500000000 1 2>, - <400000000 450000000 1 3>; + <445000000 500000000 2 1>, + <400000000 450000000 3 1>; }; plladiv: plladivck { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1a57298636a5..2ebc42140ea6 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -140,8 +140,8 @@ 595000000 650000000 3 0 545000000 600000000 0 1 495000000 555000000 1 1 - 445000000 500000000 1 2 - 400000000 450000000 1 3>; + 445000000 500000000 2 1 + 400000000 450000000 3 1>; }; plladiv: plladivck { @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c30..83089540e324 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c29945e07c5a..80127638b379 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -773,7 +773,6 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; - interrupts = <0 343 0x4>; status = "disabled"; }; @@ -984,6 +983,17 @@ #size-cells = <1>; status = "disabled"; }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..dc7a292fe939 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -10,26 +10,26 @@ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; hdmi_clkin_ck: hdmi_clkin_ck { @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b8ece4be41ca..17b22e9cc2aa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -113,7 +113,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; + reg = <0x10490000 0x10000>, <0x10480000 0x10000>; }; combiner: interrupt-controller@10440000 { @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef9..15957227ffda 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6bc3243a80d3..181d77fa2fa6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -315,15 +315,15 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 >; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 75e66c9c6144..31cfb7f2b02e 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -107,7 +107,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>; - fsl,cd-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,7 +206,7 @@ pinctrl_esdhc1_cd: esdhc1_cd { fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 >; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d5d146a8b149..c4956b0ffb35 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -21,27 +21,25 @@ <0xb0000000 0x20000000>; }; - soc { - display1: display@di1 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1>; - - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <31500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <128>; - vback-porch = <33>; - vfront-porch = <9>; - vsync-len = <3>; - vsync-active = <1>; - }; + display1: display@di1 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782b..c8e51dd41b8f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index af4929aee075..0e1406e58eff 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -11,7 +11,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW51XX"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 25da82a03110..e8e781656b3f 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -12,6 +12,19 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; + pwmleds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_pwm1>; + + front { + active-low; + label = "imx6:red:front"; + max-brightness = <248>; + pwms = <&pwm1 0 50000>; + }; + }; + regulators { compatible = "simple-bus"; @@ -109,6 +122,10 @@ >; }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; + }; + pinctrl_cubox_i_spdif: cubox-i-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -117,6 +134,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; }; @@ -153,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 31665adcbf39..0db15af41cb1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -161,7 +161,7 @@ status = "okay"; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 367af3ec9435..744c8a2d81f6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -220,7 +220,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { @@ -288,7 +288,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c91b5a6c769b..adf150c1be90 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -234,7 +234,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f25..79eac6849d4c 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 2d4e5285f3f3..57d4abe03a94 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -686,7 +686,7 @@ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_ENET_REF>, + clocks = <&clks IMX6SL_CLK_ENET>, <&clks IMX6SL_CLK_ENET_REF>; clock-names = "ipg", "ahb"; status = "disabled"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index c5a1fc75c7a3..b2d9834bf458 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -105,7 +105,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <0>; - phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { @@ -113,7 +112,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <1>; - phy-connection-type = "rgmii-id"; }; }; @@ -121,6 +119,7 @@ status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; }; }; @@ -128,5 +127,6 @@ status = "okay"; ethernet1-port@0 { phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cf0be662297e..1becefce821b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -251,6 +251,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -301,6 +306,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 8ae8f007c8ad..c8747c7f1cc8 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -50,6 +50,13 @@ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; }; +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index ae8ae3f4f9bf..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -351,6 +351,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_keypad { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16c8b52..a4ed54988866 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d6f254f302fe..a0f6f75fe3b5 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -169,8 +169,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -192,8 +192,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2caaf18..ba0fa2caaf18 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 06473c5d9ea9..84758d76d064 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -175,8 +175,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -197,8 +197,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 6ef146edd0cd..a20fa80776d3 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -182,7 +182,6 @@ static int scoop_probe(struct platform_device *pdev) struct scoop_config *inf; struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); int ret; - int temp; if (!mem) return -EINVAL; diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 9d13dae99125..4bf72264b175 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_TEST=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index ef8815327e5b..59b7e45142d8 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y +CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e2d62048e198..534836497998 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y -CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y +CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y @@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y @@ -300,6 +301,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y @@ -352,6 +354,7 @@ CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y +CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index e11170e37442..b0bfefa23902 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -14,6 +14,7 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_NEON=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set @@ -52,6 +53,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_SPI=y CONFIG_SPI_ORION=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 59066cf0271a..536a137863cb 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_SMP=y diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index eb577f4f5f70..39eb16b0066f 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -52,7 +52,7 @@ extern inline void *return_address(unsigned int level) #endif -#define ftrace_return_addr(n) return_address(n) +#define ftrace_return_address(n) return_address(n) #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index d9702eb0b02b..94060adba174 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -208,8 +208,6 @@ struct sync_struct { struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; }; -extern unsigned long sync_phys; /* physical address of *mcpm_sync */ - void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); void __mcpm_outbound_leave_critical(unsigned int cluster, int state); diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index f989d7c22dc5..e4e4208a9130 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -114,8 +114,14 @@ static inline struct thread_info *current_thread_info(void) ((unsigned long)(task_thread_info(tsk)->cpu_context.pc)) #define thread_saved_sp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp)) + +#ifndef CONFIG_THUMB2_KERNEL #define thread_saved_fp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) +#else +#define thread_saved_fp(tsk) \ + ((unsigned long)(task_thread_info(tsk)->cpu_context.r7)) +#endif extern void crunch_task_disable(struct thread_info *); extern void crunch_task_copy(struct thread_info *, void *); diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 9db4b659d03e..cb1424240ff6 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ - TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ - TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ @@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ - TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ - TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ TEST_R( op "eq r",11,VAL1,", #0xf5") \ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ TEST_R( op " r",8, VAL2,", #0x000af000") @@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void) TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ - TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ TEST( op "eq" s " r0, #0xf5") \ TEST( op "ne" s " r11, #0xf5000000") \ TEST( op s " r7, #0x000af000") \ @@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void) TEST_SUPPORTED("cmp pc, #0x1000"); TEST_SUPPORTED("cmp sp, #0x1000"); - /* Data-processing with PC as shift*/ + /* Data-processing with PC and a shift count in a register */ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc") - - /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3") + + /* Data-processing with PC as a target and status registers updated */ TEST_UNSUPPORTED("movs pc, r1") TEST_UNSUPPORTED("movs pc, r1, lsl r2") TEST_UNSUPPORTED("movs pc, #0x10000") @@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") TEST_BF_R ("mov pc, r",0,2f,"") - TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1") TEST_BB( "sub pc, pc, #1b-2b+8") #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") - TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") + TEST_R( "add pc, pc, r",10,-2,", asl #1") #ifdef CONFIG_THUMB2_KERNEL TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") @@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void) TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") TEST_R("clzeq r7, r",14,0x1,"") TEST_R("clz lr, r",7, 0xffffffff,"") @@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2") TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2") TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc") +#endif TEST_GROUP("Multiply and multiply-accumulate") @@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("ldrsht r1, [r2], #48") #endif +#if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") @@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48") TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48") +#endif TEST_GROUP("Miscellaneous") @@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void) TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") COPROCESSOR_INSTRUCTIONS_ST_LD("",e) +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_MC_MR("",e) +#endif TEST_UNSUPPORTED("svc 0") TEST_UNSUPPORTED("svc 0xffffff") @@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void) TEST( "blx __dummy_thumb_subroutine_odd") #endif /* __LINUX_ARM_ARCH__ >= 6 */ +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_ST_LD("2",f) +#endif #if __LINUX_ARM_ARCH__ >= 6 COPROCESSOR_INSTRUCTIONS_MC_MR("2",f) #endif diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 379639998d5a..08d731294bcd 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -225,6 +225,7 @@ static int pre_handler_called; static int post_handler_called; static int jprobe_func_called; static int kretprobe_handler_called; +static int tests_failed; #define FUNC_ARG1 0x12345678 #define FUNC_ARG2 0xabcdef @@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long)) pr_info(" jprobe\n"); ret = test_jprobe(func); +#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE) + if (ret == -EINVAL) { + pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n"); + tests_failed = ret; + ret = 0; + } +#endif if (ret < 0) return ret; @@ -1672,6 +1680,8 @@ static int __init run_all_tests(void) out: if (ret == 0) + ret = tests_failed; + if (ret == 0) pr_info("Finished kprobe tests OK\n"); else pr_err("kprobe tests failed\n"); diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 2037f7205987..1d37568c547a 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1924,7 +1924,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, struct perf_event *event) { int idx; - int bit; + int bit = -1; unsigned int prefix; unsigned int region; unsigned int code; @@ -1953,7 +1953,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, } idx = armv7pmu_get_event_idx(cpuc, event); - if (idx < 0 && krait_event) + if (idx < 0 && bit >= 0) clear_bit(bit, cpuc->used_mask); return idx; diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c index 51a13a027989..8eaef81d8344 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/kernel/probes-arm.c @@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = { /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, 0, NOPC, 0, ANY)), + REGS(NOPC, 0, NOPC, 0, NOPC)), /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG, - REGS(0, ANY, NOPC, 0, ANY)), + REGS(0, NOPC, NOPC, 0, NOPC)), /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ @@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = { /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, ANY, NOPC, 0, ANY)), + REGS(NOPC, NOPC, NOPC, 0, NOPC)), DECODE_END }; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 0dd3b79b15c3..0c27ed6f3f23 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -908,7 +908,7 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int tracehook_report_syscall(struct pt_regs *regs, +static void tracehook_report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir) { unsigned long ip; @@ -926,7 +926,6 @@ static int tracehook_report_syscall(struct pt_regs *regs, current_thread_info()->syscall = -1; regs->ARM_ip = ip; - return current_thread_info()->syscall; } asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) @@ -938,7 +937,9 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) return -1; if (test_thread_flag(TIF_SYSCALL_TRACE)) - scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + + scno = current_thread_info()->syscall; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 9bc6db1c1348..41c839167e87 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,10 +1,9 @@ -config ARCH_BCM +menuconfig ARCH_BCM bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help This enables support for Broadcom ARM based SoC chips -menu "Broadcom SoC Selection" - depends on ARCH_BCM +if ARCH_BCM config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 @@ -88,4 +87,4 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx -endmenu +endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 101e0f356730..2631cfc5ab0d 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,4 +1,4 @@ -config ARCH_BERLIN +menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -9,8 +9,6 @@ config ARCH_BERLIN if ARCH_BERLIN -menu "Marvell Berlin SoC variants" - config MACH_BERLIN_BG2 bool "Marvell Armada 1500 (BG2)" select CACHE_L2X0 @@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q select HAVE_ARM_TWD if SMP select PINCTRL_BERLIN_BG2Q -endmenu - endif diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 66838f42037f..3c22a1990ecd 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,12 +1,11 @@ -config ARCH_CNS3XXX +menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. -menu "CNS3XXX platform type" - depends on ARCH_CNS3XXX +if ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" @@ -17,4 +16,4 @@ config MACH_CNS3420VB This is a platform with an on-board ARM11 MPCore and has support for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. -endmenu +endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index db18ef866593..584e8d4e2892 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX - select ARCH_HAS_CPUFREQ select CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d58995c9a95a..8f9b66c4ac78 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,10 +7,9 @@ # Configuration options for the EXYNOS4 -config ARCH_EXYNOS +menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" if ARCH_MULTI_V7 select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select ARM_AMBA @@ -30,8 +29,6 @@ config ARCH_EXYNOS if ARCH_EXYNOS -menu "SAMSUNG EXYNOS SoCs Support" - config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" select ARM_CPU_SUSPEND if PM @@ -118,8 +115,6 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 -endmenu - config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 16617bdb37a9..1ee91763fa7c 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); +void exynos_sysram_init(void); void exynos_cpuidle_init(void); void exynos_cpufreq_init(void); void exynos_init_late(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 90aab4d75d08..46d893fcbe85 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = { void __init exynos_cpuidle_init(void) { - if (soc_is_exynos5440()) - return; - - platform_device_register(&exynos_cpuidle); + if (soc_is_exynos4210() || soc_is_exynos5250()) + platform_device_register(&exynos_cpuidle); } void __init exynos_cpufreq_init(void) @@ -184,6 +182,28 @@ void __init exynos_cpufreq_init(void) platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); } +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +void __init exynos_sysram_init(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + void __init exynos_init_late(void) { if (of_machine_is_compatible("samsung,exynos5440")) @@ -198,7 +218,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { struct map_desc iodesc; - __be32 *reg; + const __be32 *reg; int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && @@ -271,6 +291,13 @@ static void __init exynos_dt_machine_init(void) } } + /* + * This is called from smp_prepare_cpus if we've built for SMP, but + * we still need to set it up for PM and firmware ops if not. + */ + if (!IS_ENABLED(CONFIG_SMP)) + exynos_sysram_init(); + exynos_cpuidle_init(); exynos_cpufreq_init(); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8c..e8797bb78871 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 69fa48397394..8a134d019cb3 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -46,13 +46,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) if (cpu == 1) exynos_cpu_power_down(cpu); - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); + wfi(); if (pen_release == cpu_logical_map(cpu)) { /* diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 0498d0b887ef..ace0ed617476 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -25,7 +25,6 @@ #define EXYNOS5420_CPUS_PER_CLUSTER 4 #define EXYNOS5420_NR_CLUSTERS 2 -#define MCPM_BOOT_ADDR_OFFSET 0x1c /* * The common v7_exit_coherency_flush API could not be used because of the @@ -343,11 +342,13 @@ static int __init exynos_mcpm_init(void) pr_info("Exynos MCPM support installed\n"); /* - * Future entries into the kernel can now go - * through the cluster entry vectors. + * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr + * as part of secondary_cpu_start(). Let's redirect it to the + * mcpm_entry_point(). */ - __raw_writel(virt_to_phys(mcpm_entry_point), - ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */ + __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */ + __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8); iounmap(ns_sram_base_addr); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ec02422e8499..1c8d31e39520 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,28 +32,6 @@ extern void exynos4_secondary_startup(void); -void __iomem *sysram_base_addr; -void __iomem *sysram_ns_base_addr; - -static void __init exynos_smp_prepare_sysram(void) -{ - struct device_node *node; - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { - if (!of_device_is_available(node)) - continue; - sysram_base_addr = of_iomap(node, 0); - break; - } - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { - if (!of_device_is_available(node)) - continue; - sysram_ns_base_addr = of_iomap(node, 0); - break; - } -} - static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) @@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; + exynos_sysram_init(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); - exynos_smp_prepare_sysram(); - /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 87c0d34c7fba..202ca73e49c4 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -300,7 +300,7 @@ static int exynos_pm_suspend(void) tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); return 0; @@ -334,7 +334,7 @@ static void exynos_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_restore_register(); /* For release retention */ @@ -353,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); early_wakeup: @@ -440,15 +440,18 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self, case CPU_PM_ENTER: if (cpu == 0) { exynos_pm_central_suspend(); - exynos_cpu_save_register(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_save_register(); } break; case CPU_PM_EXIT: if (cpu == 0) { - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == + ARM_CPU_PART_CORTEX_A9) { scu_enable(S5P_VA_SCU); - exynos_cpu_restore_register(); + exynos_cpu_restore_register(); + } exynos_pm_central_resume(); } break; diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fe6570ebbdde..797cb134bfff 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/pm_domain.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/of_address.h> #include <linux/of_platform.h> @@ -24,6 +25,8 @@ #include "regs-pmu.h" +#define MAX_CLK_PER_DOMAIN 4 + /* * Exynos specific wrapper around the generic power domain */ @@ -32,6 +35,9 @@ struct exynos_pm_domain { char const *name; bool is_off; struct generic_pm_domain pd; + struct clk *oscclk; + struct clk *clk[MAX_CLK_PER_DOMAIN]; + struct clk *pclk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + /* Set oscclk before powering off a domain*/ + if (!power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->oscclk)) + pr_err("%s: error setting oscclk as parent to clock %d\n", + pd->name, i); + } + } + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); @@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) cpu_relax(); usleep_range(80, 100); } + + /* Restore clocks after powering on a domain*/ + if (power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->pclk[i])) + pr_err("%s: error setting parent to clock%d\n", + pd->name, i); + } + } + return 0; } @@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void) for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; - int on; + int on, i; + struct device *dev; pdev = of_find_device_by_node(np); + dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; + pd->oscclk = clk_get(dev, "oscclk"); + if (IS_ERR(pd->oscclk)) + goto no_clk; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "clk%d", i); + pd->clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->clk[i])) + break; + snprintf(clk_name, sizeof(clk_name), "pclk%d", i); + pd->pclk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->pclk[i])) { + clk_put(pd->clk[i]); + pd->clk[i] = ERR_PTR(-EINVAL); + break; + } + } + + if (IS_ERR(pd->clk[0])) + clk_put(pd->oscclk); + +no_clk: platform_set_drvdata(pdev, pd); on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 830b76e70250..a5960e2ac090 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,7 +1,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d42eab76d53..4b5185748f74 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,5 @@ -config ARCH_MXC +menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -13,8 +12,7 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -menu "Freescale i.MX support" - depends on ARCH_MXC +if ARCH_MXC config MXC_TZIC bool @@ -99,7 +97,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -124,7 +121,6 @@ config SOC_IMX35 config SOC_IMX5 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select MXC_TZIC @@ -738,9 +734,9 @@ config SOC_IMX6 select HAVE_IMX_MMDC select HAVE_IMX_SRC select MFD_SYSCON - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" @@ -775,9 +771,9 @@ config SOC_VF610 select ARM_GIC select PINCTRL_VF610 select VF_PIT_TIMER - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 help This enable support for Freescale Vybrid VF610 processor. @@ -786,4 +782,4 @@ endif source "arch/arm/mach-imx/devices/Kconfig" -endmenu +endif diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d2..84acdfd1d715 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 21cf06cebade..5408ca70c8d6 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -312,6 +312,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); + clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index ba43321001d8..64f8e2564a37 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR bool config INTEGRATOR_IMPD1 - tristate "Include support for Integrator/IM-PD1" + bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP select ARCH_REQUIRE_GPIOLIB select ARM_VIC diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0e870ea818c4..3ce880729cff 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = { */ #define IMPD1_VALID_IRQS 0x00000bffU -static int __init impd1_probe(struct lm_device *dev) +/* + * As this module is bool, it is OK to have this as __init_refok() - no + * probe calls will be done after the initial system bootup, as devices + * are discovered as part of the machine startup. + */ +static int __init_refok impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; int irq_base; @@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev) static struct lm_driver impd1_driver = { .drv = { .name = "impd1", + /* + * As we're dropping the probe() function, suppress driver + * binding from sysfs. + */ + .suppress_bind_attrs = true, }, .probe = impd1_probe, .remove = impd1_remove, diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index dd0cc677d596..660ca6feff40 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -480,25 +480,18 @@ static const struct of_device_id ebi_match[] = { static void __init ap_init_of(void) { unsigned long sc_dec; - struct device_node *root; struct device_node *syscon; struct device_node *ebi; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 ap_sc_id; - int err; int i; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - - syscon = of_find_matching_node(root, ap_syscon_match); + syscon = of_find_matching_node(NULL, ap_syscon_match); if (!syscon) return; - ebi = of_find_matching_node(root, ebi_match); + ebi = of_find_matching_node(NULL, ebi_match); if (!ebi) return; @@ -509,19 +502,17 @@ static void __init ap_init_of(void) if (!ebi_base) return; + of_platform_populate(NULL, of_default_bus_match_table, + ap_auxdata_lookup, NULL); + ap_sc_id = readl(ap_syscon_base); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XVC"; + soc_dev_attr->machine = "Integrator/AP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (ap_sc_id & 0x0f)); @@ -536,9 +527,6 @@ static void __init ap_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, ap_sc_id); - of_platform_populate(root, of_default_bus_match_table, - ap_auxdata_lookup, parent); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a938242b0c95..0e57f8f820a5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -279,20 +279,13 @@ static const struct of_device_id intcp_syscon_match[] = { static void __init intcp_init_of(void) { - struct device_node *root; struct device_node *cpcon; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 intcp_sc_id; - int err; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - - cpcon = of_find_matching_node(root, intcp_syscon_match); + cpcon = of_find_matching_node(NULL, intcp_syscon_match); if (!cpcon) return; @@ -300,19 +293,17 @@ static void __init intcp_init_of(void) if (!intcp_con_base) return; + of_platform_populate(NULL, of_default_bus_match_table, + intcp_auxdata_lookup, NULL); + intcp_sc_id = readl(intcp_con_base); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XCV"; + soc_dev_attr->machine = "Integrator/CP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (intcp_sc_id & 0x0f)); @@ -326,8 +317,6 @@ static void __init intcp_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, intcp_sc_id); - of_platform_populate(root, of_default_bus_match_table, - intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index f50bc936cb84..98a156afaa94 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,6 +1,7 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 + depends on ARM_PATCH_PHYS_VIRT select ARM_GIC select HAVE_ARM_ARCH_TIMER select CLKSRC_MMIO diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 82a4ba8578a2..f49328c39bef 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MOXART +menuconfig ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6090b9eb00c8..b9bc599a5fd0 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MVEBU +menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO @@ -10,15 +10,15 @@ config ARCH_MVEBU select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB select PCI_QUIRKS if PCI + select OF_ADDRESS_PCI if ARCH_MVEBU -menu "Marvell EBU SoC variants" - config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER select CACHE_L2X0 + select ARM_CPU_SUSPEND config MACH_ARMADA_370 bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 @@ -84,7 +84,6 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK @@ -97,6 +96,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -endmenu - endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 2ecb828e4a8b..1636cdbef01a 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -7,7 +7,7 @@ CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o ifeq ($(CONFIG_MACH_MVEBU_V7),y) -obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 8bb742fdf5ca..b2524d689f21 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -23,6 +23,7 @@ #include <linux/mbus.h> #include <linux/signal.h> #include <linux/slab.h> +#include <linux/irqchip.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -71,17 +72,23 @@ static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, return 1; } -static void __init mvebu_timer_and_clk_init(void) +static void __init mvebu_init_irq(void) { - of_clk_init(NULL); - clocksource_of_init(); + irqchip_init(); mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); +} + +static void __init external_abort_quirk(void) +{ + u32 dev, rev; - if (of_machine_is_compatible("marvell,armada375")) - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, + "imprecise external abort"); } static void __init i2c_quirk(void) @@ -169,8 +176,10 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) + if (of_machine_is_compatible("marvell,a375-db")) { + external_abort_quirk(); thermal_quirk(); + } of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -185,7 +194,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, MACHINE_END @@ -198,7 +207,7 @@ static const char * const armada_375_dt_compat[] = { DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, @@ -213,7 +222,7 @@ static const char * const armada_38x_dt_compat[] = { DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 53a55c8520bf..a1d407c0febe 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -66,6 +66,8 @@ static void __iomem *pmsu_mp_base; extern void ll_disable_coherency(void); extern void ll_enable_coherency(void); +extern void armada_370_xp_cpu_resume(void); + static struct platform_device armada_xp_cpuidle_device = { .name = "cpuidle-armada-370-xp", }; @@ -140,13 +142,6 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); } -static void armada_370_xp_cpu_resume(void) -{ - asm volatile("bl ll_add_cpu_to_smp_group\n\t" - "bl ll_enable_coherency\n\t" - "b cpu_resume\n\t"); -} - /* No locking is needed because we only access per-CPU registers */ void armada_370_xp_pmsu_idle_prepare(bool deepidle) { diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S new file mode 100644 index 000000000000..fc3de68d8c54 --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * This is the entry point through which CPUs exiting cpuidle deep + * idle state are going. + */ +ENTRY(armada_370_xp_cpu_resume) +ARM_BE8(setend be ) @ go BE8 if entered LE + bl ll_add_cpu_to_smp_group + bl ll_enable_coherency + b cpu_resume +ENDPROC(armada_370_xp_cpu_resume) + diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 486d301f43fd..3c61096c8627 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,4 +1,4 @@ -config ARCH_NOMADIK +menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB @@ -15,7 +15,6 @@ config ARCH_NOMADIK Support for the Nomadik platform by ST-Ericsson if ARCH_NOMADIK -menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" @@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT select I2C_NOMADIK -endmenu endif config NOMADIK_8815 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0ba482638ebf..1c1ed737f7ab 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,6 @@ +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + config ARCH_OMAP bool @@ -28,12 +31,11 @@ config ARCH_OMAP4 select ARM_CPU_SUSPEND if PM select ARM_ERRATA_720789 select ARM_GIC - select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select OMAP_INTERCONNECT - select PL310_ERRATA_588369 - select PL310_ERRATA_727915 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE select ARM_ERRATA_754322 @@ -80,7 +82,6 @@ config SOC_DRA7XX config ARCH_OMAP2PLUS bool select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688 endmenu endif + +endmenu diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8421f38cf445..8ca99e9321e3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -110,14 +110,16 @@ obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) -obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) +am33xx-43xx-prcm-common += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common) +obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \ + $(am33xx-43xx-prcm-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d3..67fd26a18441 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf862..ee6c784cd6b7 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 15a778ce7707..bd2441790779 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff029737c8f0..dc571f1d3b8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +#ifdef CONFIG_CACHE_L2X0 int omap_l2_cache_init(void); +#else +static inline int omap_l2_cache_init(void) +{ + return 0; +} +#endif extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); @@ -155,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) @@ -241,7 +249,6 @@ static inline void __iomem *omap4_get_scu_base(void) } #endif -extern void __init gic_init_irq(void); extern void gic_dist_disable(void); extern void gic_dist_enable(void); extern bool gic_dist_disabled(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf3..b6f8f348296e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <linux/platform_data/spi-omap2-mcspi.h> @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd9..f7492df1cbba 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include <linux/platform_data/dsp-omap.h> @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900f..8bc13380f0a0 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 43969da5d50b..d42022f2a71e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -649,6 +649,18 @@ void __init dra7xxx_check_revision(void) } break; + case 0xb9bc: + switch (rev) { + case 0: + omap_revision = DRA722_REV_ES1_0; + break; + default: + /* If we have no new revisions */ + omap_revision = DRA722_REV_ES1_0; + break; + } + break; + default: /* Unknown default to latest silicon rev as default*/ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fd88edeb027f..f62f7537d899 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -183,8 +183,10 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, m0_entry = mux->muxnames[0]; /* First check for full name in mode0.muxmode format */ - if (mode0_len && strncmp(muxname, m0_entry, mode0_len)) - continue; + if (mode0_len) + if (strncmp(muxname, m0_entry, mode0_len) || + (strlen(m0_entry) != mode0_len)) + continue; /* Then check for muxmode only */ for (i = 0; i < OMAP_MUX_NR_MODES; i++) { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 326cd982a3cb..539e8106eb96 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -102,26 +102,6 @@ void __init omap_barriers_init(void) {} #endif -void __init gic_init_irq(void) -{ - void __iomem *omap_irq_base; - - /* Static mapping, never released */ - gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); - BUG_ON(!gic_dist_base_addr); - - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); - BUG_ON(!twd_base); - - /* Static mapping, never released */ - omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!omap_irq_base); - - omap_wakeupgen_init(); - - gic_init(0, 29, gic_dist_base_addr, omap_irq_base); -} - void gic_dist_disable(void) { if (gic_dist_base_addr) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index f7bb435bb543..6c074f37cdd2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void) soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.assert_hardreset = _am33xx_assert_hardreset; + soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; + soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 290213f2cbe3..1103aa0e0d29 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -2020,6 +2020,77 @@ static struct omap_hwmod omap54xx_wd_timer2_hwmod = { }, }; +/* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ +/* ocp2scp3 */ +static struct omap_hwmod omap54xx_ocp2scp3_hwmod; +/* l4_cfg -> ocp2scp3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap54xx_ocp2scp3_hwmod = { + .name = "ocp2scp3", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'sata' class + * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { + .sysc_offs = 0x0000, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_sata_hwmod_class = { + .name = "sata", + .sysc = &omap54xx_sata_sysc, +}; + +/* sata */ +static struct omap_hwmod omap54xx_sata_hwmod = { + .name = "sata", + .class = &omap54xx_sata_hwmod_class, + .clkdm_name = "l3init_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l4_cfg -> sata */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_sata_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; /* * Interfaces @@ -2765,6 +2836,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_wkup__wd_timer2, + &omap54xx_l4_cfg__ocp2scp3, + &omap54xx_l4_cfg__sata, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec05..284324f2b98a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* @@ -1731,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532b..cbefbd7cfdb5 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index de2a34c423a7..01ca8086fb6c 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -462,6 +462,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) +#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index e4e505f52ba0..042f693ef423 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,4 +1,4 @@ -config ARCH_SIRF +menuconfig ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB @@ -11,7 +11,7 @@ config ARCH_SIRF if ARCH_SIRF -menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" +comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" @@ -37,8 +37,6 @@ config ARCH_MARCO help Support for CSR SiRFSoC ARM Cortex A9 Platform -endmenu - config SIRF_IRQ bool diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fd2b99dceb89..ee5697ba05bc 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,4 +1,4 @@ -config ARCH_QCOM +menuconfig ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -11,8 +11,6 @@ config ARCH_QCOM if ARCH_QCOM -menu "Qualcomm SoC Selection" - config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM @@ -25,8 +23,6 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -endmenu - config QCOM_SCM bool diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 04284de7aca5..ad5316ae524e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS Compile in platform device definition for Samsung TouchScreen. config S3C24XX_DMA - bool "S3C2410 DMA support" + bool "S3C2410 DMA support (deprecated)" select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 3136d86b0d6e..26ca2427e53d 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -18,9 +18,9 @@ config CPU_S3C6410 Enable S3C6410 CPU support config S3C64XX_PL080 - bool "S3C64XX DMA using generic PL08x driver" + def_bool DMADEVICES + select ARM_AMBA select AMBA_PL08X - select SAMSUNG_DMADEV config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index bb2111b3751e..26003e23796d 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,16 +9,18 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 15170be97a74..c5e3a969b063 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -9,8 +9,9 @@ if ARCH_S5PC100 config CPU_S5PC100 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT - select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 8c3abe521757..f60f2862856d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV help Enable S5PV210 CPU support diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index f9874ba60cc8..108939f8d053 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -329,6 +329,11 @@ static struct mtd_partition collie_partitions[] = { .name = "rootfs", .offset = MTDPART_OFS_APPEND, .size = 0x00e20000, + }, { + .name = "bootblock", + .offset = MTDPART_OFS_APPEND, + .size = 0x00020000, + .mask_flags = MTD_WRITEABLE } }; @@ -356,7 +361,7 @@ static void collie_flash_exit(void) } static struct flash_platform_data collie_flash_data = { - .map_name = "jedec_probe", + .map_name = "cfi_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index dbd954e61aa7..798073057e51 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,7 +1,7 @@ config ARCH_SHMOBILE bool -config ARCH_SHMOBILE_MULTI +menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE @@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI -comment "Renesas ARM SoCs System Type" +#comment "Renesas ARM SoCs System Type" config ARCH_EMEV2 bool "Emma Mobile EV2" @@ -85,7 +85,6 @@ config ARCH_R8A73A4 select CPU_V7 select SH_CLK_CPG select RENESAS_IRQC - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -264,7 +263,6 @@ config MACH_KOELSCH config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 0786249b2832..90df2022276a 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -14,7 +14,6 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE - select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index abf9ee9bbc3f..878e9ec97d0f 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,5 +1,5 @@ menuconfig ARCH_STI - bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 + bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL @@ -11,8 +11,8 @@ menuconfig ARCH_STI select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 - select PL310_ERRATA_753970 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 help Include support for STiH41x SOCs like STiH415/416 using the device tree for discovery diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 3f9587bb51f6..b6085084e0ff 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,8 +12,81 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/reboot.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) + +#define SUN6I_WATCHDOG1_IRQ_REG 0x00 +#define SUN6I_WATCHDOG1_CTRL_REG 0x10 +#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 +#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) +#define SUN6I_WATCHDOG1_MODE_REG 0x18 +#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) + +static void __iomem *wdt_base; + +static void sun4i_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + + /* + * Restart the watchdog. The default (and lowest) interval + * value for the watchdog is 0.5s. + */ + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); + + while (1) { + mdelay(5); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + } +} + +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-a10-wdt" }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void __init sunxi_dt_init(void) +{ + sunxi_setup_restart(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -23,7 +96,9 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, + .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -51,5 +126,7 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") + .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, + .restart = sun4i_restart, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index e16999e5b735..095399618ca5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,6 +1,5 @@ -config ARCH_TEGRA +menuconfig ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC @@ -16,8 +15,7 @@ config ARCH_TEGRA help This enables support for NVIDIA Tegra based systems. -menu "NVIDIA Tegra options" - depends on ARCH_TEGRA +if ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" @@ -69,4 +67,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -endmenu +endif diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index e3a96d7302e9..bc51a71394af 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U300 +menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU select ARCH_REQUIRE_GPIOLIB @@ -16,8 +16,6 @@ config ARCH_U300 if ARCH_U300 -menu "ST-Ericsson AB U300/U335 Platform" - config MACH_U300 depends on ARCH_U300 bool "U300" @@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -endmenu - endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index b41a42da1505..699e8601dbf0 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,9 +1,8 @@ -config ARCH_U8500 +menuconfig ARCH_U8500 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 depends on MMU select AB8500_CORE select ABX500_CORE - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_754322 @@ -16,7 +15,7 @@ config ARCH_U8500 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK - select PL310_ERRATA_753970 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture @@ -34,8 +33,6 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU -menu "Ux500 target platform (boards)" - config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C @@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. -endmenu - config UX500_DEBUG_UART int "Ux500 UART to use for low-level debug" default 2 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 90249cfc37b3..d8b9330f896a 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,4 +1,4 @@ -config ARCH_VEXPRESS +menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN @@ -37,14 +37,13 @@ config ARCH_VEXPRESS platforms. The traditional (ATAGs) boot method is not usable on these boards with this option. -menu "Versatile Express platform type" - depends on ARCH_VEXPRESS +if ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" default y select ARM_ERRATA_720789 - select PL310_ERRATA_753970 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 help Provides common dependencies for Versatile Express platforms based on Cortex-A5 and Cortex-A9 processors. In order to @@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select PM_OPP help @@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. -endmenu +endif diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 08f56a41cb55..aaaa24fe4d71 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,6 +1,5 @@ config ARCH_VT8500 bool - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select VT8500_TIMER diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 573e0db1d0f0..0c164f81e72d 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,6 +1,5 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index eda0dd0ab97b..c348eaee7ee2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -889,9 +889,10 @@ config CACHE_L2X0 help This option enables the L2x0 PrimeCell. +if CACHE_L2X0 + config CACHE_PL310 bool - depends on CACHE_L2X0 default y if CPU_V7 && !(CPU_V6 || CPU_V6K) help This option enables optimisations for the PL310 cache @@ -899,7 +900,6 @@ config CACHE_PL310 config PL310_ERRATA_588369 bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & Invalidate maintenance operations: by Physical Address @@ -912,7 +912,6 @@ config PL310_ERRATA_588369 config PL310_ERRATA_727915 bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance operation (offset 0x7FC). This operation runs in background so that @@ -923,7 +922,6 @@ config PL310_ERRATA_727915 config PL310_ERRATA_753970 bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. @@ -938,7 +936,6 @@ config PL310_ERRATA_753970 config PL310_ERRATA_769419 bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 help On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable @@ -948,6 +945,8 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +endif + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index efc5cabf70e0..7c3fb41a462e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { @@ -1069,6 +1069,33 @@ static const struct l2c_init_data of_l2c310_data __initconst = { }; /* + * This is a variant of the of_l2c310_data with .sync set to + * NULL. Outer sync operations are not needed when the system is I/O + * coherent, and potentially harmful in certain situations (PCIe/PL310 + * deadlock on Armada 375/38x due to hardware I/O coherency). The + * other operations are kept because they are infrequent (therefore do + * not cause the deadlock in practice) and needed for secondary CPU + * boot and other power management activities. + */ +static const struct l2c_init_data of_l2c310_coherent_data __initconst = { + .type = "L2C-310 Coherent", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .resume = l2c310_resume, + }, +}; + +/* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use * inclusive start and end addresses. @@ -1487,6 +1514,10 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; + if (of_device_is_compatible(np, "arm,pl310-cache") && + of_property_read_bool(np, "arm,io-coherent")) + data = &of_l2c310_coherent_data; + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); if (old_aux != ((old_aux & aux_mask) | aux_val)) { pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index da1874f9f8cf..a014dfacd5ca 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -300,6 +300,7 @@ void __init sanity_check_meminfo(void) sanity_check_meminfo_mpu(); end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; + memblock_set_current_limit(end); } /* diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 97448c3acf38..ba0d58e1a2a2 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -502,6 +502,7 @@ __\name\()_proc_info: .long \cpu_val .long \cpu_mask .long PMD_TYPE_SECT | \ + PMD_SECT_CACHEABLE | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 243dfcb2ca0e..301b892d97d9 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -35,27 +35,15 @@ config SAMSUNG_PM Base platform power management code for samsung code if PLAT_SAMSUNG +menu "Samsung Common options" # boot configurations comment "Boot options" -config S3C_BOOT_ERROR_RESET - bool "S3C Reboot on decompression error" - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C_BOOT_UART_FORCE_FIFO - bool "Force UART FIFO on during boot process" - default y - help - Say Y here to force the UART FIFOs on during the kernel - uncompressor - - config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" + depends on ARCH_S3C64XX default 0 help Choice of which UART port to use for the low-level messages, @@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO Include legacy GPIO power management code for platforms not using pinctrl-samsung driver. -endif - config SAMSUNG_DMADEV - bool - select ARM_AMBA + bool "Use legacy Samsung DMA abstraction" + depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX select DMADEVICES - select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ - CPU_S5P6450 || CPU_S5P6440) + default y help Use DMA device engine for PL330 DMAC. +endif + config S5P_DEV_MFC bool help @@ -503,4 +490,5 @@ config DEBUG_S3C_UART default "2" if DEBUG_S3C_UART2 default "3" if DEBUG_S3C_UART3 +endmenu endif |