diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/smartreflex-class3.c | 29 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/smartreflex.c | 1165 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/smartreflex.h | 256 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/sr_device.c | 39 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/voltage.h | 21 | ||||
| -rw-r--r-- | arch/arm/plat-omap/Kconfig | 31 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/voltage.h | 21 |
11 files changed, 95 insertions, 1489 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c2629..f74e975027b6 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -70,8 +70,9 @@ obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o -obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o -obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o + +obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b26d3c9bca16..ab1f40125ffd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,6 +14,8 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ +#include <linux/power/smartreflex.h> + #include <plat/omap_hwmod.h> #include <mach/irqs.h> #include <plat/cpu.h> @@ -29,8 +31,6 @@ #include <plat/dmtimer.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" @@ -1325,7 +1325,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { }; static struct omap_hwmod omap34xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1343,7 +1343,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }; static struct omap_hwmod omap36xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1370,7 +1370,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { }; static struct omap_hwmod omap34xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -1388,7 +1388,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }; static struct omap_hwmod omap36xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f30e861ce6d9..6b564c9c2cea 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,6 +19,7 @@ */ #include <linux/io.h> +#include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> #include <plat/cpu.h> @@ -32,8 +33,6 @@ #include <plat/common.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 78564895e914..9fac67d6c985 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -88,7 +88,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); #else diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 955566eefac4..1da8f03c479e 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -11,36 +11,37 @@ * published by the Free Software Foundation. */ -#include "smartreflex.h" +#include <linux/power/smartreflex.h> +#include "voltage.h" -static int sr_class3_enable(struct voltagedomain *voltdm) +static int sr_class3_enable(struct omap_sr *sr) { - unsigned long volt = voltdm_get_voltage(voltdm); + unsigned long volt = voltdm_get_voltage(sr->voltdm); if (!volt) { - pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", - __func__, voltdm->name); + pr_warning("%s: Curr voltage unknown. Cannot enable %s\n", + __func__, sr->name); return -ENODATA; } - omap_vp_enable(voltdm); - return sr_enable(voltdm, volt); + omap_vp_enable(sr->voltdm); + return sr_enable(sr->voltdm, volt); } -static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) +static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) { - sr_disable_errgen(voltdm); - omap_vp_disable(voltdm); - sr_disable(voltdm); + sr_disable_errgen(sr->voltdm); + omap_vp_disable(sr->voltdm); + sr_disable(sr->voltdm); if (is_volt_reset) - voltdm_reset(voltdm); + voltdm_reset(sr->voltdm); return 0; } -static int sr_class3_configure(struct voltagedomain *voltdm) +static int sr_class3_configure(struct omap_sr *sr) { - return sr_configure_errgen(voltdm); + return sr_configure_errgen(sr->voltdm); } /* SR class3 structure */ diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c deleted file mode 100644 index 008fbd7b9352..000000000000 --- a/arch/arm/mach-omap2/smartreflex.c +++ /dev/null @@ -1,1165 +0,0 @@ -/* - * OMAP SmartReflex Voltage Control - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#include "common.h" - -#include "pm.h" -#include "smartreflex.h" - -#define SMARTREFLEX_NAME_LEN 16 -#define NVALUE_NAME_LEN 40 -#define SR_DISABLE_TIMEOUT 200 - -struct omap_sr { - struct list_head node; - struct platform_device *pdev; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; - struct dentry *dbg_dir; - unsigned int irq; - int srid; - int ip_type; - int nvalue_count; - bool autocomp_active; - u32 clk_length; - u32 err_weight; - u32 err_minlimit; - u32 err_maxlimit; - u32 accum_data; - u32 senn_avgweight; - u32 senp_avgweight; - u32 senp_mod; - u32 senn_mod; - void __iomem *base; -}; - -/* sr_list contains all the instances of smartreflex module */ -static LIST_HEAD(sr_list); - -static struct omap_sr_class_data *sr_class; -static struct omap_sr_pmic_data *sr_pmic_data; -static struct dentry *sr_dbg_dir; - -static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) -{ - __raw_writel(value, (sr->base + offset)); -} - -static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, - u32 value) -{ - u32 reg_val; - - /* - * Smartreflex error config register is special as it contains - * certain status bits which if written a 1 into means a clear - * of those bits. So in order to make sure no accidental write of - * 1 happens to those status bits, do a clear of them in the read - * value. This mean this API doesn't rewrite values in these bits - * if they are currently set, but does allow the caller to write - * those bits. - */ - if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1) - mask |= ERRCONFIG_STATUS_V1_MASK; - else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2) - mask |= ERRCONFIG_VPBOUNDINTST_V2; - - reg_val = __raw_readl(sr->base + offset); - reg_val &= ~mask; - - value &= mask; - - reg_val |= value; - - __raw_writel(reg_val, (sr->base + offset)); -} - -static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset) -{ - return __raw_readl(sr->base + offset); -} - -static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm) -{ - struct omap_sr *sr_info; - - if (!voltdm) { - pr_err("%s: Null voltage domain passed!\n", __func__); - return ERR_PTR(-EINVAL); - } - - list_for_each_entry(sr_info, &sr_list, node) { - if (voltdm == sr_info->voltdm) - return sr_info; - } - - return ERR_PTR(-ENODATA); -} - -static irqreturn_t sr_interrupt(int irq, void *data) -{ - struct omap_sr *sr_info = data; - u32 status = 0; - - switch (sr_info->ip_type) { - case SR_TYPE_V1: - /* Read the status bits */ - status = sr_read_reg(sr_info, ERRCONFIG_V1); - - /* Clear them by writing back */ - sr_write_reg(sr_info, ERRCONFIG_V1, status); - break; - case SR_TYPE_V2: - /* Read the status bits */ - status = sr_read_reg(sr_info, IRQSTATUS); - - /* Clear them by writing back */ - sr_write_reg(sr_info, IRQSTATUS, status); - break; - default: - dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n", - sr_info->ip_type); - return IRQ_NONE; - } - - if (sr_class->notify) - sr_class->notify(sr_info->voltdm, status); - - return IRQ_HANDLED; -} - -static void sr_set_clk_length(struct omap_sr *sr) -{ - struct clk *sys_ck; - u32 sys_clk_speed; - - if (cpu_is_omap34xx()) - sys_ck = clk_get(NULL, "sys_ck"); - else - sys_ck = clk_get(NULL, "sys_clkin_ck"); - - if (IS_ERR(sys_ck)) { - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", - __func__); - return; - } - - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - - switch (sys_clk_speed) { - case 12000000: - sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK; - break; - case 13000000: - sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK; - break; - case 19200000: - sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK; - break; - case 26000000: - sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK; - break; - case 38400000: - sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK; - break; - default: - dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n", - __func__, sys_clk_speed); - break; - } -} - -static void sr_set_regfields(struct omap_sr *sr) -{ - /* - * For time being these values are defined in smartreflex.h - * and populated during init. May be they can be moved to board - * file or pmic specific data structure. In that case these structure - * fields will have to be populated using the pdata or pmic structure. - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sr->err_weight = OMAP3430_SR_ERRWEIGHT; - sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; - sr->accum_data = OMAP3430_SR_ACCUMDATA; - if (!(strcmp(sr->voltdm->name, "mpu"))) { - sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; - } else { - sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; - } - } -} - -static void sr_start_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (!sr_class->enable(sr->voltdm)) - sr->autocomp_active = true; -} - -static void sr_stop_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (sr->autocomp_active) { - sr_class->disable(sr->voltdm, 1); - sr->autocomp_active = false; - } -} - -/* - * This function handles the intializations which have to be done - * only when both sr device and class driver regiter has - * completed. This will be attempted to be called from both sr class - * driver register and sr device intializtion API's. Only one call - * will ultimately succeed. - * - * Currently this function registers interrupt handler for a particular SR - * if smartreflex class driver is already registered and has - * requested for interrupts and the SR interrupt line in present. - */ -static int sr_late_init(struct omap_sr *sr_info) -{ - char *name; - struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data; - struct resource *mem; - int ret = 0; - - if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (name == NULL) { - ret = -ENOMEM; - goto error; - } - ret = request_irq(sr_info->irq, sr_interrupt, - 0, name, sr_info); - if (ret) - goto error; - disable_irq(sr_info->irq); - } - - if (pdata && pdata->enable_on_init) - sr_start_vddautocomp(sr_info); - - return ret; - -error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - list_del(&sr_info->node); - dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" - "interrupt handler. Smartreflex will" - "not function as desired\n", __func__); - kfree(name); - kfree(sr_info); - - return ret; -} - -static void sr_v1_disable(struct omap_sr *sr) -{ - int timeout = 0; - int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTST; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, - ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* Disable all other SR interrupts and clear the status as needed */ - if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1) - errconf_val |= ERRCONFIG_VPBOUNDINTST_V1; - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1), - errconf_val); - - /* - * Wait for SR to be disabled. - * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) & - ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN, - ERRCONFIG_MCUDISACKINTST); -} - -static void sr_v2_disable(struct omap_sr *sr) -{ - int timeout = 0; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* - * Disable all other SR interrupts and clear the status - * write to status register ONLY on need basis - only if status - * is set. - */ - if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2) - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - ERRCONFIG_VPBOUNDINTST_V2); - else - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - 0x0); - sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT | - IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT)); - sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT | - IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT)); - - /* - * Wait for SR to be disabled. - * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, IRQSTATUS) & - IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT); - sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT); -} - -static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs) -{ - int i; - - if (!sr->nvalue_table) { - dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n", - __func__); - return 0; - } - - for (i = 0; i < sr->nvalue_count; i++) { - if (sr->nvalue_table[i].efuse_offs == efuse_offs) - return sr->nvalue_table[i].nvalue; - } - - return 0; -} - -/* Public Functions */ - -/** - * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the - * error generator module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the error generator module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_errgen(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_errconfig, errconfig_offs; - u32 vpboundint_en, vpboundint_st; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN; - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) | - (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) | - (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT); - sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK | - SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), - sr_errconfig); - - /* Enabling the interrupts if the ERROR module is used */ - sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st), - vpboundint_en); - - return 0; -} - -/** - * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable the error generator module inside the smartreflex module. - * - * Returns 0 on success and error value in case of failure. - */ -int sr_disable_errgen(struct voltagedomain *voltdm) -{ - u32 errconfig_offs; - u32 vpboundint_en, vpboundint_st; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - switch (sr->ip_type) { - case SR_TYPE_V1: - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - /* Disable the interrupts of ERROR module */ - sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); - - /* Disable the Sensor and errorgen */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); - - return 0; -} - -/** - * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the - * minmaxavg module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the minmaxavg module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_minmax(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_avgwt; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | - (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT); - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) | - (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT); - sr_write_reg(sr, AVGWEIGHT, sr_avgwt); - - /* - * Enabling the interrupts if MINMAXAVG module is used. - * TODO: check if all the interrupts are mandatory - */ - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN), - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST | - ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST)); - break; - case SR_TYPE_V2: - sr_write_reg(sr, IRQSTATUS, - IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT); - sr_write_reg(sr, IRQENABLE_SET, - IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT); - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - return 0; -} - -/** - * sr_enable() - Enables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * @volt: The voltage at which the Voltage domain associated with - * the smartreflex module is operating at. - * This is required only to program the correct Ntarget value. - * - * This API is to be called from the smartreflex class driver to - * enable a smartreflex module. Returns 0 on success. Returns error - * value if the voltage passed is wrong or if ntarget value is wrong. - */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt) -{ - struct omap_volt_data *volt_data; - struct omap_sr *sr = _sr_lookup(voltdm); - u32 nvalue_reciprocal; - int ret; - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); - - if (IS_ERR(volt_data)) { - dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table" - "for nominal voltage %ld\n", __func__, volt); - return PTR_ERR(volt_data); - } - - nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs); - - if (!nvalue_reciprocal) { - dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n", - __func__, volt); - return -ENODATA; - } - - /* errminlimit is opp dependent and hence linked to voltage */ - sr->err_minlimit = volt_data->sr_errminlimit; - - pm_runtime_get_sync(&sr->pdev->dev); - - /* Check if SR is already enabled. If yes do nothing */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) - return 0; - - /* Configure SR */ - ret = sr_class->configure(voltdm); - if (ret) - return ret; - - sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal); - - /* SRCONFIG - enable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); - return 0; -} - -/** - * sr_disable() - Disables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable a smartreflex module. - */ -void sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - /* Check if SR clocks are already disabled. If yes do nothing */ - if (pm_runtime_suspended(&sr->pdev->dev)) - return; - - /* - * Disable SR if only it is indeed enabled. Else just - * disable the clocks. - */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) { - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_v1_disable(sr); - break; - case SR_TYPE_V2: - sr_v2_disable(sr); - break; - default: - dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n", - sr->ip_type); - } - } - - pm_runtime_put_sync_suspend(&sr->pdev->dev); -} - -/** - * sr_register_class() - API to register a smartreflex class parameters. - * @class_data: The structure containing various sr class specific data. - * - * This API is to be called by the smartreflex class driver to register itself - * with the smartreflex driver during init. Returns 0 on success else the - * error value. - */ -int sr_register_class(struct omap_sr_class_data *class_data) -{ - struct omap_sr *sr_info; - - if (!class_data) { - pr_warning("%s:, Smartreflex class data passed is NULL\n", - __func__); - return -EINVAL; - } - - if (sr_class) { - pr_warning("%s: Smartreflex class driver already registered\n", - __func__); - return -EBUSY; - } - - sr_class = class_data; - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - list_for_each_entry(sr_info, &sr_list, node) - sr_late_init(sr_info); - - return 0; -} - -/** - * omap_sr_enable() - API to enable SR clocks and to call into the - * registered smartreflex class enable API. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to enable - * a particular smartreflex module. This API will do the initial - * configurations to turn on the smartreflex module and in turn call - * into the registered smartreflex class enable API. - */ -void omap_sr_enable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->enable(voltdm); -} - -/** - * omap_sr_disable() - API to disable SR without resetting the voltage - * processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable not to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 0); -} - -/** - * omap_sr_disable_reset_volt() - API to disable SR and reset the - * voltage processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 1); -} - -/** - * omap_sr_register_pmic() - API to register pmic specific info. - * @pmic_data: The structure containing pmic specific data. - * - * This API is to be called from the PMIC specific code to register with - * smartreflex driver pmic specific info. Currently the only info required - * is the smartreflex init on the PMIC side. - */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data) -{ - if (!pmic_data) { - pr_warning("%s: Trying to register NULL PMIC data structure" - "with smartreflex\n", __func__); - return; - } - - sr_pmic_data = pmic_data; -} - -/* PM Debug FS entries to enable and disable smartreflex. */ -static int omap_sr_autocomp_show(void *data, u64 *val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - *val = sr_info->autocomp_active; - - return 0; -} - -static int omap_sr_autocomp_store(void *data, u64 val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - /* Sanity check */ - if (val > 1) { - pr_warning("%s: Invalid argument %lld\n", __func__, val); - return -EINVAL; - } - - /* control enable/disable only if there is a delta in value */ - if (sr_info->autocomp_active != val) { - if (!val) - sr_stop_vddautocomp(sr_info); - else - sr_start_vddautocomp(sr_info); - } - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show, - omap_sr_autocomp_store, "%llu\n"); - -static int __init omap_sr_probe(struct platform_device *pdev) -{ - struct omap_sr *sr_info; - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct resource *mem, *irq; - struct dentry *nvalue_dir; - struct omap_volt_data *volt_data; - int i, ret = 0; - char *name; - - sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); - if (!sr_info) { - dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", - __func__); - return -ENOMEM; - } - - platform_set_drvdata(pdev, sr_info); - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - ret = -EINVAL; - goto err_free_devinfo; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem resource\n", __func__); - ret = -ENODEV; - goto err_free_devinfo; - } - - mem = request_mem_region(mem->start, resource_size(mem), - dev_name(&pdev->dev)); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem region\n", __func__); - ret = -EBUSY; - goto err_free_devinfo; - } - - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - - pm_runtime_enable(&pdev->dev); - pm_runtime_irq_safe(&pdev->dev); - - sr_info->pdev = pdev; - sr_info->srid = pdev->id; - sr_info->voltdm = pdata->voltdm; - sr_info->nvalue_table = pdata->nvalue_table; - sr_info->nvalue_count = pdata->nvalue_count; - sr_info->senn_mod = pdata->senn_mod; - sr_info->senp_mod = pdata->senp_mod; - sr_info->autocomp_active = false; - sr_info->ip_type = pdata->ip_type; - sr_info->base = ioremap(mem->start, resource_size(mem)); - if (!sr_info->base) { - dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); - ret = -ENOMEM; - goto err_release_region; - } - - if (irq) - sr_info->irq = irq->start; - - sr_set_clk_length(sr_info); - sr_set_regfields(sr_info); - - list_add(&sr_info->node, &sr_list); - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - if (sr_class) { - ret = sr_late_init(sr_info); - if (ret) { - pr_warning("%s: Error in SR late init\n", __func__); - goto err_iounmap; - } - } - - dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); - if (!sr_dbg_dir) { - sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); - if (IS_ERR_OR_NULL(sr_dbg_dir)) { - ret = PTR_ERR(sr_dbg_dir); - pr_err("%s:sr debugfs dir creation failed(%d)\n", - __func__, ret); - goto err_iounmap; - } - } - - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (!name) { - dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", - __func__); - ret = -ENOMEM; - goto err_iounmap; - } - sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); - kfree(name); - if (IS_ERR_OR_NULL(sr_info->dbg_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", - __func__); - ret = PTR_ERR(sr_info->dbg_dir); - goto err_iounmap; - } - - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, - sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops); - (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_weight); - (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_maxlimit); - (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_minlimit); - - nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir); - if (IS_ERR_OR_NULL(nvalue_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory" - "for n-values\n", __func__); - ret = PTR_ERR(nvalue_dir); - goto err_debugfs; - } - - omap_voltage_get_volttable(sr_info->voltdm, &volt_data); - if (!volt_data) { - dev_warn(&pdev->dev, "%s: No Voltage table for the" - " corresponding vdd vdd_%s. Cannot create debugfs" - "entries for n-values\n", - __func__, sr_info->voltdm->name); - ret = -ENODATA; - goto err_debugfs; - } - - for (i = 0; i < sr_info->nvalue_count; i++) { - char name[NVALUE_NAME_LEN + 1]; - - snprintf(name, sizeof(name), "volt_%d", - volt_data[i].volt_nominal); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, - &(sr_info->nvalue_table[i].nvalue)); - } - - return ret; - -err_debugfs: - debugfs_remove_recursive(sr_info->dbg_dir); -err_iounmap: - list_del(&sr_info->node); - iounmap(sr_info->base); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); -err_free_devinfo: - kfree(sr_info); - - return ret; -} - -static int __devexit omap_sr_remove(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - struct resource *mem; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return PTR_ERR(sr_info); - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - if (sr_info->dbg_dir) - debugfs_remove_recursive(sr_info->dbg_dir); - - list_del(&sr_info->node); - iounmap(sr_info->base); - kfree(sr_info); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - - return 0; -} - -static void __devexit omap_sr_shutdown(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return; - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - - return; -} - -static struct platform_driver smartreflex_driver = { - .remove = __devexit_p(omap_sr_remove), - .shutdown = __devexit_p(omap_sr_shutdown), - .driver = { - .name = "smartreflex", - }, -}; - -static int __init sr_init(void) -{ - int ret = 0; - - /* - * sr_init is a late init. If by then a pmic specific API is not - * registered either there is no need for anything to be done on - * the PMIC side or somebody has forgotten to register a PMIC - * handler. Warn for the second condition. - */ - if (sr_pmic_data && sr_pmic_data->sr_pmic_init) - sr_pmic_data->sr_pmic_init(); - else - pr_warning("%s: No PMIC hook to init smartreflex\n", __func__); - - ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe); - if (ret) { - pr_err("%s: platform driver register failed for SR\n", - __func__); - return ret; - } - - return 0; -} -late_initcall(sr_init); - -static void __exit sr_exit(void) -{ - platform_driver_unregister(&smartreflex_driver); -} -module_exit(sr_exit); - -MODULE_DESCRIPTION("OMAP Smartreflex Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); -MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h deleted file mode 100644 index 5809141171f8..000000000000 --- a/arch/arm/mach-omap2/smartreflex.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * OMAP Smartreflex Defines and Routines - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H -#define __ASM_ARM_OMAP_SMARTREFLEX_H - -#include <linux/platform_device.h> - -#include "voltage.h" - -/* - * Different Smartreflex IPs version. The v1 is the 65nm version used in - * OMAP3430. The v2 is the update for the 45nm version of the IP - * used in OMAP3630 and OMAP4430 - */ -#define SR_TYPE_V1 1 -#define SR_TYPE_V2 2 - -/* SMART REFLEX REG ADDRESS OFFSET */ -#define SRCONFIG 0x00 -#define SRSTATUS 0x04 -#define SENVAL 0x08 -#define SENMIN 0x0C -#define SENMAX 0x10 -#define SENAVG 0x14 -#define AVGWEIGHT 0x18 -#define NVALUERECIPROCAL 0x1c -#define SENERROR_V1 0x20 -#define ERRCONFIG_V1 0x24 -#define IRQ_EOI 0x20 -#define IRQSTATUS_RAW 0x24 -#define IRQSTATUS 0x28 -#define IRQENABLE_SET 0x2C -#define IRQENABLE_CLR 0x30 -#define SENERROR_V2 0x34 -#define ERRCONFIG_V2 0x38 - -/* Bit/Shift Positions */ - -/* SRCONFIG */ -#define SRCONFIG_ACCUMDATA_SHIFT 22 -#define SRCONFIG_SRCLKLENGTH_SHIFT 12 -#define SRCONFIG_SENNENABLE_V1_SHIFT 5 -#define SRCONFIG_SENPENABLE_V1_SHIFT 3 -#define SRCONFIG_SENNENABLE_V2_SHIFT 1 -#define SRCONFIG_SENPENABLE_V2_SHIFT 0 -#define SRCONFIG_CLKCTRL_SHIFT 0 - -#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) - -#define SRCONFIG_SRENABLE BIT(11) -#define SRCONFIG_SENENABLE BIT(10) -#define SRCONFIG_ERRGEN_EN BIT(9) -#define SRCONFIG_MINMAXAVG_EN BIT(8) -#define SRCONFIG_DELAYCTRL BIT(2) - -/* AVGWEIGHT */ -#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 -#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 - -/* NVALUERECIPROCAL */ -#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 -#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 -#define NVALUERECIPROCAL_RNSENP_SHIFT 8 -#define NVALUERECIPROCAL_RNSENN_SHIFT 0 - -/* ERRCONFIG */ -#define ERRCONFIG_ERRWEIGHT_SHIFT 16 -#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 -#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 - -#define SR_ERRWEIGHT_MASK (0x07 << 16) -#define SR_ERRMAXLIMIT_MASK (0xff << 8) -#define SR_ERRMINLIMIT_MASK (0xff << 0) - -#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) -#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) -#define ERRCONFIG_MCUACCUMINTEN BIT(29) -#define ERRCONFIG_MCUACCUMINTST BIT(28) -#define ERRCONFIG_MCUVALIDINTEN BIT(27) -#define ERRCONFIG_MCUVALIDINTST BIT(26) -#define ERRCONFIG_MCUBOUNDINTEN BIT(25) -#define ERRCONFIG_MCUBOUNDINTST BIT(24) -#define ERRCONFIG_MCUDISACKINTEN BIT(23) -#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) -#define ERRCONFIG_MCUDISACKINTST BIT(22) -#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) - -#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ - ERRCONFIG_MCUACCUMINTST | \ - ERRCONFIG_MCUVALIDINTST | \ - ERRCONFIG_MCUBOUNDINTST | \ - ERRCONFIG_MCUDISACKINTST) -/* IRQSTATUS */ -#define IRQSTATUS_MCUACCUMINT BIT(3) -#define IRQSTATUS_MCVALIDINT BIT(2) -#define IRQSTATUS_MCBOUNDSINT BIT(1) -#define IRQSTATUS_MCUDISABLEACKINT BIT(0) - -/* IRQENABLE_SET and IRQENABLE_CLEAR */ -#define IRQENABLE_MCUACCUMINT BIT(3) -#define IRQENABLE_MCUVALIDINT BIT(2) -#define IRQENABLE_MCUBOUNDSINT BIT(1) -#define IRQENABLE_MCUDISABLEACKINT BIT(0) - -/* Common Bit values */ - -#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c -#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 -#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 -#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 -#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 - -/* - * 3430 specific values. Maybe these should be passed from board file or - * pmic structures. - */ -#define OMAP3430_SR_ACCUMDATA 0x1f4 - -#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 -#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 - -#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 -#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 - -#define OMAP3430_SR_ERRWEIGHT 0x04 -#define OMAP3430_SR_ERRMAXLIMIT 0x02 - -/** - * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass - * pmic specific info to smartreflex driver - * - * @sr_pmic_init: API to initialize smartreflex on the PMIC side. - */ -struct omap_sr_pmic_data { - void (*sr_pmic_init) (void); -}; - -/** - * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. - * - * @sensor_voltdm_name: Name of voltdomain of SR instance - */ -struct omap_smartreflex_dev_attr { - const char *sensor_voltdm_name; -}; - -#ifdef CONFIG_OMAP_SMARTREFLEX -/* - * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. - * The smartreflex class driver should pass the class type. - * Should be used to populate the class_type field of the - * omap_smartreflex_class_data structure. - */ -#define SR_CLASS1 0x1 -#define SR_CLASS2 0x2 -#define SR_CLASS3 0x3 - -/** - * struct omap_sr_class_data - Smartreflex class driver info - * - * @enable: API to enable a particular class smaartreflex. - * @disable: API to disable a particular class smartreflex. - * @configure: API to configure a particular class smartreflex. - * @notify: API to notify the class driver about an event in SR. - * Not needed for class3. - * @notify_flags: specify the events to be notified to the class driver - * @class_type: specify which smartreflex class. - * Can be used by the SR driver to take any class - * based decisions. - */ -struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); - u8 notify_flags; - u8 class_type; -}; - -/** - * struct omap_sr_nvalue_table - Smartreflex n-target value info - * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. - */ -struct omap_sr_nvalue_table { - u32 efuse_offs; - u32 nvalue; -}; - -/** - * struct omap_sr_data - Smartreflex platform data. - * - * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr - * @nvalue_count: Number of distinct nvalues in the nvalue table - * @enable_on_init: whether this sr module needs to enabled at - * boot up or not. - * @nvalue_table: table containing the efuse offsets and nvalues - * corresponding to them. - * @voltdm: Pointer to the voltage domain associated with the SR - */ -struct omap_sr_data { - int ip_type; - u32 senp_mod; - u32 senn_mod; - int nvalue_count; - bool enable_on_init; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; -}; - -/* Smartreflex module enable/disable interface */ -void omap_sr_enable(struct voltagedomain *voltdm); -void omap_sr_disable(struct voltagedomain *voltdm); -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); - -/* API to register the pmic specific data with the smartreflex driver. */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); - -/* Smartreflex driver hooks to be called from Smartreflex class driver */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt); -void sr_disable(struct voltagedomain *voltdm); -int sr_configure_errgen(struct voltagedomain *voltdm); -int sr_disable_errgen(struct voltagedomain *voltdm); -int sr_configure_minmax(struct voltagedomain *voltdm); - -/* API to register the smartreflex class driver with the smartreflex driver */ -int sr_register_class(struct omap_sr_class_data *class_data); -#else -static inline void omap_sr_enable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable_reset_volt( - struct voltagedomain *voltdm) {} -static inline void omap_sr_register_pmic( - struct omap_sr_pmic_data *pmic_data) {} -#endif -#endif diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index a503e1e8358c..e107e3915a8a 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -17,6 +17,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/power/smartreflex.h> #include <linux/err.h> #include <linux/slab.h> @@ -24,7 +25,6 @@ #include <plat/omap_device.h> -#include "smartreflex.h" #include "voltage.h" #include "control.h" #include "pm.h" @@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, struct omap_sr_data *sr_data) { struct omap_sr_nvalue_table *nvalue_table; - int i, count = 0; + int i, j, count = 0; + + sr_data->nvalue_count = 0; + sr_data->nvalue_table = NULL; while (volt_data[count].volt_nominal) count++; @@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count, GFP_KERNEL); - for (i = 0; i < count; i++) { + if (!nvalue_table) { + pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n"); + return; + } + + for (i = 0, j = 0; i < count; i++) { u32 v; + /* * In OMAP4 the efuse registers are 24 bit aligned. * A __raw_readl will fail for non-32 bit aligned address @@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, omap_ctrl_readb(offset + 1) << 8 | omap_ctrl_readb(offset + 2) << 16; } else { - v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); + v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); } - nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs; - nvalue_table[i].nvalue = v; + /* + * Many OMAP SoCs don't have the eFuse values set. + * For example, pretty much all OMAP3xxx before + * ES3.something. + * + * XXX There needs to be some way for board files or + * userspace to add these in. + */ + if (v == 0) + continue; + + nvalue_table[j].nvalue = v; + nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs; + nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit; + nvalue_table[j].volt_nominal = volt_data[i].volt_nominal; + + j++; } sr_data->nvalue_table = nvalue_table; - sr_data->nvalue_count = count; + sr_data->nvalue_count = j; } static int __init sr_dev_init(struct omap_hwmod *oh, void *user) @@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) goto exit; } + sr_data->name = oh->name; sr_data->ip_type = oh->class->rev; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b092cf36..34ef504adafd 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,6 +16,8 @@ #include <linux/err.h> +#include <plat/voltage.h> + #include "vc.h" #include "vp.h" @@ -91,25 +93,6 @@ struct voltagedomain { }; /** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; - -/** * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ad95c7a5d009..816dec062f3c 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS_CLASS -config OMAP_SMARTREFLEX - bool "SmartReflex support" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM +config POWER_AVS_OMAP + bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" + depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM help - Say Y if you want to enable SmartReflex. - - SmartReflex can perform continuous dynamic voltage - scaling around the nominal operating point voltage - according to silicon characteristics and operating - conditions. Enabling SmartReflex reduces power - consumption. + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or + version 2 of the SmartReflex IP. + V1 is the 65nm version used in OMAP3430. + V2 is the update for the 45nm version of the IP used in OMAP3630 + and OMAP4430 Please note, that by default SmartReflex is only - initialized. To enable the automatic voltage - compensation for vdd mpu and vdd core from user space, + initialized and not enabled. To enable the automatic voltage + compensation for vdd mpu and vdd core from user space, user must write 1 to - /debug/voltage/vdd_<X>/smartreflex/autocomp, - where X is mpu or core for OMAP3. + /debug/smartreflex/sr_<X>/autocomp, + where X is mpu_iva or core for OMAP3. Optionally autocompensation can be enabled in the kernel by default during system init via the enable_on_init flag which an be passed as platform data to the smartreflex driver. -config OMAP_SMARTREFLEX_CLASS3 +config POWER_AVS_OMAP_CLASS3 bool "Class 3 mode of Smartreflex Implementation" - depends on OMAP_SMARTREFLEX && TWL4030_CORE + depends on POWER_AVS_OMAP && TWL4030_CORE help Say Y to enable Class 3 implementation of Smartreflex diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 0a6a482ec014..5be4d5def427 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -11,10 +11,29 @@ #ifndef __ARCH_ARM_OMAP_VOLTAGE_H #define __ARCH_ARM_OMAP_VOLTAGE_H +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; struct voltagedomain; struct voltagedomain *voltdm_lookup(const char *name); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); - +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); #endif |