diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-j784s4-evm.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 383 |
1 files changed, 381 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index d511b25d62e3..9338d987180d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -27,14 +27,16 @@ mmc1 = &main_sdhci1; i2c0 = &wkup_i2c0; i2c3 = &main_i2c0; + ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw1_port1; }; memory@80000000 { device_type = "memory"; bootph-all; /* 32G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x07 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000007 0x80000000>; }; reserved_memory: reserved-memory { @@ -272,6 +274,59 @@ }; }; }; + + transceiver0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + /* standby pin has been grounded by default */ + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + mux-states = <&mux1 1>; + }; + + mux1: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>; + idle-state = <1>; + }; + + codec_audio: sound { + compatible = "ti,j7200-cpb-audio"; + model = "j784s4-cpb"; + + ti,cpb-mcasp = <&mcasp0>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 265 0>, <&k3_clks 265 1>, + <&k3_clks 157 34>, <&k3_clks 157 63>; + clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000", + "cpb-codec-scki", "cpb-codec-scki-48000"; + }; }; &wkup_gpio0 { @@ -280,6 +335,30 @@ &main_pmx0 { bootph-all; + main_cpsw2g_default_pins: main-cpsw2g-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */ + J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */ + J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */ + J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */ + J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */ + J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */ + J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */ + J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */ + J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */ + J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */ + J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ + J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + main_uart8_pins_default: main-uart8-default-pins { bootph-all; pinctrl-single,pins = < @@ -336,6 +415,49 @@ J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */ >; }; + + main_mcan4_pins_default: main-mcan4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */ + J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */ + >; + }; + + main_usbss0_pins_default: main-usbss0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ + >; + }; + + main_i2c3_pins_default: main-i2c3-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */ + J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */ + >; + }; + + main_mcasp0_pins_default: main-mcasp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */ + J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */ + J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */ + J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ + >; + }; }; &wkup_pmx2 { @@ -415,6 +537,32 @@ J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ >; }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */ + >; + }; + + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ + >; + }; }; &wkup_pmx1 { @@ -579,6 +727,27 @@ }; }; }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1330000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; }; &mcu_uart0 { @@ -748,6 +917,14 @@ "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; + + p12-hog { + /* P12 - AUDIO_MUX_SEL */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "AUDIO_MUX_SEL"; + }; }; exp2: gpio@22 { @@ -763,6 +940,22 @@ "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", "USER_INPUT1", "USER_LED1", "USER_LED2"; + + p13-hog { + /* P13 - CANUART_MUX_SEL0 */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX_SEL0"; + }; + + p15-hog { + /* P15 - CANUART_MUX1_SEL1 */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX1_SEL1"; + }; }; }; @@ -832,6 +1025,31 @@ phy-handle = <&mcu_phy0>; }; +&main_cpsw1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_default_pins>; + status = "okay"; +}; + +&main_cpsw1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_mdio_default_pins>; + status = "okay"; + + main_cpsw1_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&main_cpsw1_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&main_cpsw1_phy0>; + status = "okay"; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; @@ -1041,6 +1259,40 @@ <&k3_clks 218 22>; }; +&serdes0 { + status = "okay"; + + serdes0_usb_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + &serdes_wiz4 { status = "okay"; }; @@ -1105,3 +1357,130 @@ }; }; }; + +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver0>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver1>; +}; + +&main_mcan16 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan4_pins_default>; + phys = <&transceiver3>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie1_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, + <&serdes_wiz0 3>, <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&pcie1_rc { + status = "okay"; + num-lanes = <2>; + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie1_link>; + phy-names = "pcie-phy"; +}; + +&serdes1 { + status = "okay"; + + serdes1_pcie0_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&pcie0_rc { + status = "okay"; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie0_link>; + phy-names = "pcie-phy"; +}; + +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + +&main_i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + #sound-dai-cells = <1>; + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + clocks = <&audio_refclk1>; + clock-names = "scki"; + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; +}; + +&mcasp0 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp0_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 1 + 2 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +}; |