diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-j722s-evm.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index bf3c246d13d1..dd3b5f7039d7 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -9,7 +9,9 @@ /dts-v1/; #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> #include "k3-j722s.dtsi" +#include "k3-serdes.h" / { compatible = "ti,j722s-evm", "ti,j722s"; @@ -105,6 +107,15 @@ <3300000 0x1>; }; + vsys_io_3v3: regulator-vsys-io-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + vsys_io_1v8: regulator-vsys-io-1v8 { compatible = "regulator-fixed"; regulator-name = "vsys_io_1v8"; @@ -122,6 +133,35 @@ regulator-always-on; regulator-boot-on; }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "J722S-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&audio_refclk1>; + }; + }; }; &main_pmx0 { @@ -202,6 +242,27 @@ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ >; }; + + main_usb1_pins_default: main-usb1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */ + >; + }; + + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */ + J722S_IOPAD(0x008c, PIN_OUTPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */ + J722S_IOPAD(0x0084, PIN_INPUT, 2) /* (N21) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; }; &cpsw3g { @@ -277,6 +338,12 @@ bootph-all; }; +&k3_clks { + /* Configure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -301,6 +368,48 @@ "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#", "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN", "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ"; + + p05-hog { + /* P05 - USB2.0_MUX_SEL */ + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-high; + }; + + p01_hog: p01-hog { + /* P01 - TRC_MUX_SEL */ + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "TRC_MUX_SEL"; + }; + + p02_hog: p02-hog { + /* P02 - MCASP1_FET_SEL */ + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP1_FET_SEL"; + }; + + p13_hog: p13-hog { + /* P13 - GPIO_AUD_RSTn */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "GPIO_AUD_RSTn"; + }; + }; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + AVDD-supply = <&vsys_io_3v3>; + IOVDD-supply = <&vsys_io_3v3>; + DRVDD-supply = <&vsys_io_3v3>; + DVDD-supply = <&vsys_io_1v8>; }; }; @@ -384,3 +493,76 @@ status = "okay"; bootph-all; }; + +&serdes_ln_ctrl { + idle-states = <J722S_SERDES0_LANE0_USB>, + <J722S_SERDES1_LANE0_PCIE0_LANE0>; +}; + +&serdes0 { + status = "okay"; + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes1 { + status = "okay"; + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>; + }; +}; + +&pcie0_rc { + reset-gpios = <&exp1 18 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; + ti,vbus-divider; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +}; |