diff options
Diffstat (limited to 'arch/arm64/boot/dts/st/stm32mp257f-ev1.dts')
| -rw-r--r-- | arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 77 |
1 files changed, 68 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 27b7360e5dba..214191a8322b 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/st,stm32mp25-regulator.h> #include "stm32mp257.dtsi" #include "stm32mp25xf.dtsi" #include "stm32mp25-pinctrl.dtsi" @@ -17,7 +18,9 @@ compatible = "st,stm32mp257f-ev1", "st,stm32mp257"; aliases { + ethernet0 = ðernet2; serial0 = &usart2; + serial1 = &usart6; }; chosen { @@ -40,14 +43,6 @@ no-map; }; }; - - vdd_sdcard: vdd-sdcard { - compatible = "regulator-fixed"; - regulator-name = "vdd_sdcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; }; &arm_wdt { @@ -55,6 +50,29 @@ status = "okay"; }; +ðernet2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + max-speed = <1000>; + phy-handle = <&phy0_eth2>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0_eth2: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <1>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + &i2c2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; @@ -75,6 +93,37 @@ status = "disabled"; }; +&scmi_regu { + scmi_vddio1: regulator@0 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + scmi_vddcore: regulator@11 { + reg = <VOLTD_SCMI_STPMIC2_BUCK2>; + regulator-name = "vddcore"; + }; + scmi_v1v8: regulator@14 { + reg = <VOLTD_SCMI_STPMIC2_BUCK5>; + regulator-name = "v1v8"; + }; + scmi_v3v3: regulator@16 { + reg = <VOLTD_SCMI_STPMIC2_BUCK7>; + regulator-name = "v3v3"; + }; + scmi_vdd_emmc: regulator@18 { + reg = <VOLTD_SCMI_STPMIC2_LDO2>; + regulator-name = "vdd_emmc"; + }; + scmi_vdd3v3_usb: regulator@20 { + reg = <VOLTD_SCMI_STPMIC2_LDO4>; + regulator-name = "vdd3v3_usb"; + }; + scmi_vdd_sdcard: regulator@23 { + reg = <VOLTD_SCMI_STPMIC2_LDO7>; + regulator-name = "vdd_sdcard"; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a>; @@ -84,7 +133,8 @@ disable-wp; st,neg-edge; bus-width = <4>; - vmmc-supply = <&vdd_sdcard>; + vmmc-supply = <&scmi_vdd_sdcard>; + vqmmc-supply = <&scmi_vddio1>; status = "okay"; }; @@ -109,3 +159,12 @@ pinctrl-2 = <&usart2_sleep_pins_a>; status = "okay"; }; + +&usart6 { + pinctrl-names = "default", "idle", "sleep"; + pinctrl-0 = <&usart6_pins_a>; + pinctrl-1 = <&usart6_idle_pins_a>; + pinctrl-2 = <&usart6_sleep_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; |