diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8250.dtsi | 83 |
1 files changed, 53 insertions, 30 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8ccade628f1f..9d6c97d1fd9d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2204,7 +2204,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2580,6 +2580,8 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; + power-domains = <&gcc UFS_PHY_GDSC>; + #phy-cells = <0>; status = "disabled"; @@ -3936,6 +3938,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3947,6 +3951,10 @@ port@1 { reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; }; port@2 { @@ -4225,8 +4233,24 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_role_switch_out: endpoint {}; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; }; }; }; @@ -6275,7 +6299,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -6319,7 +6342,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -6363,7 +6385,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -6407,7 +6428,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -6451,7 +6471,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -6495,7 +6514,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -6539,7 +6557,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -6583,7 +6600,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -6627,7 +6643,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -6671,7 +6686,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -6715,7 +6729,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -6759,7 +6772,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -6803,7 +6815,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -6818,7 +6829,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -6838,7 +6848,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -6858,7 +6867,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -6871,16 +6879,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -6895,7 +6914,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -6910,7 +6928,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -6925,7 +6942,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -6940,7 +6956,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -6955,7 +6970,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -6970,7 +6984,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -6985,7 +6998,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -7000,7 +7012,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -7013,10 +7024,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; |