diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index 5e933fb8b363..81b3e0760154 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { aliases { @@ -26,6 +27,12 @@ }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm_backlight: backlight { compatible = "pwm-backlight"; pwms = <&clk_pwm 0 100000>; @@ -78,6 +85,35 @@ max-microvolt = <3300000>; }; + i2c_nfc: i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&nfc_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5_nfc: nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + reg_motor_vdd: regulator-motor-vdd { compatible = "regulator-fixed"; regulator-name = "motor_vdd"; @@ -114,6 +150,82 @@ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; +}; + +&blsp_i2c2 { + /* Available sensors vary depending on model variant */ + status = "okay"; + + bosch_accel: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + bosch_magn: magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + st_accel: accelerometer@1d { + compatible = "st,lsm303c-accel"; + reg = <0x1d>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; + }; + + st_magn: magnetometer@1e { + compatible = "st,lsm303c-magn"; + reg = <0x1e>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; }; }; @@ -128,6 +240,8 @@ pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -151,6 +265,42 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -223,6 +373,13 @@ }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + backlight_en_default: backlight-en-default-state { pins = "gpio98"; function = "gpio"; @@ -263,6 +420,36 @@ bias-disable; }; + nfc_default: nfc-default-state { + irq-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + nfc_i2c_default: nfc-i2c-default-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; @@ -284,3 +471,13 @@ bias-disable; }; }; + +&pm8916_gpios { + nfc_clk_req: nfc-clk-req-state { + pins = "gpio2"; + function = "func1"; + power-source = <PM8916_GPIO_L2>; + bias-disable; + input-enable; + }; +}; |