summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410')
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c1
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-fns.h6
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h241
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-mem.h28
-rw-r--r--arch/arm/mach-s3c2410/include/mach/spi-gpio.h28
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c34
6 files changed, 8 insertions, 330 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 2c126bbca08d..a5eeb62ce1c2 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -18,7 +18,6 @@
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <linux/leds.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index f453c4f2cb8e..bab139201761 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
extern int s3c2410_gpio_getirq(unsigned int pin);
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index a0a89d429296..cac1ad6b582c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -16,11 +16,7 @@
#include <mach/gpio-nrs.h>
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_MISCCR S3C2400_MISCCR
-#else
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
/* general configuration options */
@@ -42,67 +38,33 @@
/* configure GPIO ports A..G */
/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * S3C2400: 18bits, zero in bit X makes pin X output
* 1 makes port special function, this is default
*/
#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
-#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
-
#define S3C2410_GPA0_ADDR0 (1<<0)
-
#define S3C2410_GPA1_ADDR16 (1<<1)
-
#define S3C2410_GPA2_ADDR17 (1<<2)
-
#define S3C2410_GPA3_ADDR18 (1<<3)
-
#define S3C2410_GPA4_ADDR19 (1<<4)
-
#define S3C2410_GPA5_ADDR20 (1<<5)
-
#define S3C2410_GPA6_ADDR21 (1<<6)
-
#define S3C2410_GPA7_ADDR22 (1<<7)
-
#define S3C2410_GPA8_ADDR23 (1<<8)
-
#define S3C2410_GPA9_ADDR24 (1<<9)
-
#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE (1<<10)
-
#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0 (1<<11)
-
#define S3C2410_GPA12_nGCS1 (1<<12)
-#define S3C2400_GPA12_nCAS1 (1<<12)
-
#define S3C2410_GPA13_nGCS2 (1<<13)
-#define S3C2400_GPA13_nGCS1 (1<<13)
-
#define S3C2410_GPA14_nGCS3 (1<<14)
-#define S3C2400_GPA14_nGCS2 (1<<14)
-
#define S3C2410_GPA15_nGCS4 (1<<15)
-#define S3C2400_GPA15_nGCS3 (1<<15)
-
#define S3C2410_GPA16_nGCS5 (1<<16)
-#define S3C2400_GPA16_nGCS4 (1<<16)
-
#define S3C2410_GPA17_CLE (1<<17)
-#define S3C2400_GPA17_nGCS5 (1<<17)
-
#define S3C2410_GPA18_ALE (1<<18)
-
#define S3C2410_GPA19_nFWE (1<<19)
-
#define S3C2410_GPA20_nFRE (1<<20)
-
#define S3C2410_GPA21_nRSTOUT (1<<21)
-
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
@@ -111,10 +73,6 @@
* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
* 00 = input, 01 = output, 10=special function, 11=reserved
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- * 00 = input, 01 = output, 10=data, 11=special function
-
* bit 0,1 = pin 0, 2,3= pin 1...
*
* CPBUP = pull up resistor control, 1=disabled, 0=enabled
@@ -124,78 +82,35 @@
#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
-#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
-
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
-#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
-#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
-#define S3C2400_GPB2_DATA18 (0x02 << 4)
-#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
-#define S3C2400_GPB3_DATA19 (0x02 << 6)
-#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
-#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
-#define S3C2400_GPB4_RXD1 (0x03 << 8)
-#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
-#define S3C2400_GPB5_DATA21 (0x02 << 10)
-#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
-#define S3C2400_GPB6_DATA22 (0x02 << 12)
-#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
-#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
-#define S3C2400_GPB9_DATA25 (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS (0x03 << 20)
-
-#define S3C2400_GPB11_INP (0x00 << 22)
-#define S3C2400_GPB11_OUTP (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12_INP (0x00 << 24)
-#define S3C2400_GPB12_OUTP (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13_INP (0x00 << 26)
-#define S3C2400_GPB13_OUTP (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14_INP (0x00 << 28)
-#define S3C2400_GPB14_OUTP (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15_INP (0x00 << 30)
-#define S3C2400_GPB15_OUTP (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
#define S3C2410_GPB_PUPDIS(x) (1<<(x))
@@ -208,59 +123,22 @@
#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
-
#define S3C2410_GPC0_LEND (0x02 << 0)
-#define S3C2400_GPC0_VD0 (0x02 << 0)
-
#define S3C2410_GPC1_VCLK (0x02 << 2)
-#define S3C2400_GPC1_VD1 (0x02 << 2)
-
#define S3C2410_GPC2_VLINE (0x02 << 4)
-#define S3C2400_GPC2_VD2 (0x02 << 4)
-
#define S3C2410_GPC3_VFRAME (0x02 << 6)
-#define S3C2400_GPC3_VD3 (0x02 << 6)
-
#define S3C2410_GPC4_VM (0x02 << 8)
-#define S3C2400_GPC4_VD4 (0x02 << 8)
-
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
-#define S3C2400_GPC5_VD5 (0x02 << 10)
-
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
-#define S3C2400_GPC6_VD6 (0x02 << 12)
-
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
-#define S3C2400_GPC7_VD7 (0x02 << 14)
-
#define S3C2410_GPC8_VD0 (0x02 << 16)
-#define S3C2400_GPC8_VD8 (0x02 << 16)
-
#define S3C2410_GPC9_VD1 (0x02 << 18)
-#define S3C2400_GPC9_VD9 (0x02 << 18)
-
#define S3C2410_GPC10_VD2 (0x02 << 20)
-#define S3C2400_GPC10_VD10 (0x02 << 20)
-
#define S3C2410_GPC11_VD3 (0x02 << 22)
-#define S3C2400_GPC11_VD11 (0x02 << 22)
-
#define S3C2410_GPC12_VD4 (0x02 << 24)
-#define S3C2400_GPC12_VD12 (0x02 << 24)
-
#define S3C2410_GPC13_VD5 (0x02 << 26)
-#define S3C2400_GPC13_VD13 (0x02 << 26)
-
#define S3C2410_GPC14_VD6 (0x02 << 28)
-#define S3C2400_GPC14_VD14 (0x02 << 28)
-
#define S3C2410_GPC15_VD7 (0x02 << 30)
-#define S3C2400_GPC15_VD15 (0x02 << 30)
-
#define S3C2410_GPC_PUPDIS(x) (1<<(x))
/*
@@ -269,8 +147,6 @@
* almost identical setup to port b, but the special functions are mostly
* to do with the video system's data.
*
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
* almost identical setup to port c
*/
@@ -278,46 +154,31 @@
#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
-#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
-
#define S3C2410_GPD0_VD8 (0x02 << 0)
-#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
#define S3C2410_GPD1_VD9 (0x02 << 2)
-#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
#define S3C2410_GPD2_VD10 (0x02 << 4)
-#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3_VD11 (0x02 << 6)
-#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4_VD12 (0x02 << 8)
-#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5_VD13 (0x02 << 10)
-#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6_VD14 (0x02 << 12)
-#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7_VD15 (0x02 << 14)
-#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8_VD16 (0x02 << 16)
-#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
#define S3C2410_GPD9_VD17 (0x02 << 18)
-#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
#define S3C2410_GPD10_VD18 (0x02 << 20)
-#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
#define S3C2410_GPD11_VD19 (0x02 << 22)
@@ -340,9 +201,6 @@
* again, the same as port B, but dealing with I2S, SDI, and
* more miscellaneous functions
*
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
* GPIO / interrupt inputs
*/
@@ -350,74 +208,51 @@
#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
-#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
-
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
-#define S3C2400_GPE1_EINT1 (0x02 << 2)
-#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2 (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
-#define S3C2400_GPE3_EINT3 (0x02 << 6)
-#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
-#define S3C2400_GPE4_EINT4 (0x02 << 8)
-#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
-#define S3C2400_GPE5_EINT5 (0x02 << 10)
-#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_SDI (0x03 << 12)
-#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDO (0x03 << 14)
-#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
-#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
@@ -447,9 +282,6 @@
*
* pull up works like all other ports.
*
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
* GPIO/serial/misc pins
*/
@@ -457,37 +289,14 @@
#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
-#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
-
#define S3C2410_GPF0_EINT0 (0x02 << 0)
-#define S3C2400_GPF0_RXD0 (0x02 << 0)
-
#define S3C2410_GPF1_EINT1 (0x02 << 2)
-#define S3C2400_GPF1_RXD1 (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
#define S3C2410_GPF2_EINT2 (0x02 << 4)
-#define S3C2400_GPF2_TXD0 (0x02 << 4)
-
#define S3C2410_GPF3_EINT3 (0x02 << 6)
-#define S3C2400_GPF3_TXD1 (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
#define S3C2410_GPF4_EINT4 (0x02 << 8)
-#define S3C2400_GPF4_nRTS0 (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
#define S3C2410_GPF5_EINT5 (0x02 << 10)
-#define S3C2400_GPF5_nCTS0 (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
#define S3C2410_GPF6_EINT6 (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
#define S3C2410_GPF7_EINT7 (0x02 << 14)
-
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
/* S3C2410:
@@ -497,62 +306,38 @@
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
*/
#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
-#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
-
#define S3C2410_GPG0_EINT8 (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
-#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD (0x02 << 10)
-#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6_EINT14 (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT (0x02 << 12)
-#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO (0x02 << 14)
-#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
-#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
-#define S3C2400_GPG9_SPICLK (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
@@ -660,7 +445,6 @@
#define S3C2443_GPMUP S3C2410_GPIOREG(0x108)
/* miscellaneous control */
-#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
@@ -674,14 +458,6 @@
#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
-#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
-
#define S3C2410_MISCCR_USBDEV (0<<3)
#define S3C2410_MISCCR_USBHOST (1<<3)
@@ -728,7 +504,6 @@
*
* Samsung datasheet p9-25
*/
-#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
@@ -796,22 +571,6 @@
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
#define S3C2410_GSTATUS2_PONRESET (1<<0)
-/* open drain control register */
-#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
-
/* 2412/2413 sleep configuration registers */
#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 988a6863e54b..e0c67b0163d8 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -145,29 +145,8 @@
#define S3C2410_BANKCON_Tacs_SHIFT (13)
#define S3C2410_BANKCON_SRAM (0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
-
/* next bits only for SDRAM in 6,7 */
#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
@@ -194,12 +173,6 @@
#define S3C2410_REFRESH_TRP_3clk (1<<20)
#define S3C2410_REFRESH_TRP_4clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
#define S3C2410_REFRESH_TSRC_MASK (3<<18)
#define S3C2410_REFRESH_TSRC_4clk (0<<18)
#define S3C2410_REFRESH_TSRC_5clk (1<<18)
@@ -222,7 +195,6 @@
#define S3C2410_BANKSIZE_4M (0x5 << 0)
#define S3C2410_BANKSIZE_2M (0x4 << 0)
#define S3C2410_BANKSIZE_MASK (0x7 << 0)
-#define S3C2400_BANKSIZE_MASK (0x4 << 0)
#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
#define S3C2410_BANKSIZE_BURST (1<<7)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
deleted file mode 100644
index dcef2287cb38..000000000000
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPIGPIO_H
-#define __ASM_ARCH_SPIGPIO_H __FILE__
-
-struct s3c2410_spigpio_info {
- unsigned long pin_clk;
- unsigned long pin_mosi;
- unsigned long pin_miso;
-
- int num_chipselect;
- int bus_num;
-
- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
-};
-
-
-#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index e8f49feef28c..f44f77531b1e 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -32,7 +32,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -53,8 +53,6 @@
#include <mach/fb.h>
#include <plat/nand.h>
#include <plat/udc.h>
-#include <mach/spi.h>
-#include <mach/spi-gpio.h>
#include <plat/iic.h>
#include <plat/common-smdk.h>
@@ -216,32 +214,16 @@ static struct platform_device qt2410_led = {
/* SPI */
-static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
-{
- switch (cs) {
- case BITBANG_CS_ACTIVE:
- gpio_set_value(S3C2410_GPB(5), 0);
- break;
- case BITBANG_CS_INACTIVE:
- gpio_set_value(S3C2410_GPB(5), 1);
- break;
- }
-}
-
-static struct s3c2410_spigpio_info spi_gpio_cfg = {
- .pin_clk = S3C2410_GPG(7),
- .pin_mosi = S3C2410_GPG(6),
- .pin_miso = S3C2410_GPG(5),
- .chip_select = &spi_gpio_cs,
+static struct spi_gpio_platform_data spi_gpio_cfg = {
+ .sck = S3C2410_GPG(7),
+ .mosi = S3C2410_GPG(6),
+ .miso = S3C2410_GPG(5),
};
-
static struct platform_device qt2410_spi = {
- .name = "s3c24xx-spi-gpio",
- .id = 1,
- .dev = {
- .platform_data = &spi_gpio_cfg,
- },
+ .name = "spi-gpio",
+ .id = 1,
+ .dev.platform_data = &spi_gpio_cfg,
};
/* Board devices */
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-21 14:25:51 +0000