diff options
Diffstat (limited to 'arch/arm/mach-omap2/sleep34xx.S')
| -rw-r--r-- | arch/arm/mach-omap2/sleep34xx.S | 836 |
1 files changed, 466 insertions, 370 deletions
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 2fb205a7f285..98d8232808b8 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-omap2/sleep.S - * * (C) Copyright 2007 * Texas Instruments * Karthik Dasu <karthik-dp@ti.com> @@ -26,28 +24,35 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <plat/sram.h> #include <mach/io.h> -#include "cm.h" -#include "prm.h" +#include "cm2xxx_3xxx.h" +#include "prm2xxx_3xxx.h" #include "sdrc.h" #include "control.h" -#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c - -#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ - OMAP3430_PM_PREPWSTST) -#define PM_PREPWSTST_CORE_P 0x48306AE8 -#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ - OMAP3430_PM_PREPWSTST) +/* + * Registers access definitions + */ +#define SDRC_SCRATCHPAD_SEM_OFFS 0xc +#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\ + (SDRC_SCRATCHPAD_SEM_OFFS) +#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\ + OMAP3430_PM_PREPWSTST #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL #define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) -#define SRAM_BASE_P 0x40200000 -#define CONTROL_STAT 0x480022F0 -#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is - * available */ -#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\ - + SCRATCHPAD_MEM_OFFS) +#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST) +#define SRAM_BASE_P OMAP3_SRAM_PA +#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS +#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\ + OMAP36XX_CONTROL_MEM_RTA_CTRL) + +/* Move this as correct place is available */ +#define SCRATCHPAD_MEM_OFFS 0x310 +#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) #define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) #define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) @@ -59,48 +64,38 @@ #define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) - .text -/* Function to acquire the semaphore in scratchpad */ -ENTRY(lock_scratchpad_sem) - stmfd sp!, {lr} @ save registers on stack -wait_sem: - mov r0,#1 - ldr r1, sdrc_scratchpad_sem -wait_loop: - ldr r2, [r1] @ load the lock value - cmp r2, r0 @ is the lock free ? - beq wait_loop @ not free... - swp r2, r0, [r1] @ semaphore free so lock it and proceed - cmp r2, r0 @ did we succeed ? - beq wait_sem @ no - try again - ldmfd sp!, {pc} @ restore regs and return -sdrc_scratchpad_sem: - .word SDRC_SCRATCHPAD_SEM_V -ENTRY(lock_scratchpad_sem_sz) - .word . - lock_scratchpad_sem - - .text -/* Function to release the scratchpad semaphore */ -ENTRY(unlock_scratchpad_sem) - stmfd sp!, {lr} @ save registers on stack - ldr r3, sdrc_scratchpad_sem - mov r2,#0 - str r2,[r3] - ldmfd sp!, {pc} @ restore regs and return -ENTRY(unlock_scratchpad_sem_sz) - .word . - unlock_scratchpad_sem + +/* + * API functions + */ + +/* + * The "get_*restore_pointer" functions are used to provide a + * physical restore address where the ROM code jumps while waking + * up from MPU OFF/OSWR state. + * The restore pointer is stored into the scratchpad. + */ .text /* Function call to get the restore pointer for resume from OFF */ ENTRY(get_restore_pointer) - stmfd sp!, {lr} @ save registers on stack + stmfd sp!, {lr} @ save registers on stack adr r0, restore - ldmfd sp!, {pc} @ restore regs and return + ldmfd sp!, {pc} @ restore regs and return ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer + .word . - get_restore_pointer .text -/* Function call to get the restore pointer for for ES3 to resume from OFF */ +/* Function call to get the restore pointer for 3630 resume from OFF */ +ENTRY(get_omap3630_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore_3630 + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_omap3630_restore_pointer_sz) + .word . - get_omap3630_restore_pointer + + .text +/* Function call to get the restore pointer for ES3 to resume from OFF */ ENTRY(get_es3_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore_es3 @@ -108,54 +103,23 @@ ENTRY(get_es3_restore_pointer) ENTRY(get_es3_restore_pointer_sz) .word . - get_es3_restore_pointer -ENTRY(es3_sdrc_fix) - ldr r4, sdrc_syscfg @ get config addr - ldr r5, [r4] @ get value - tst r5, #0x100 @ is part access blocked - it eq - biceq r5, r5, #0x100 @ clear bit if set - str r5, [r4] @ write back change - ldr r4, sdrc_mr_0 @ get config addr - ldr r5, [r4] @ get value - str r5, [r4] @ write back change - ldr r4, sdrc_emr2_0 @ get config addr - ldr r5, [r4] @ get value - str r5, [r4] @ write back change - ldr r4, sdrc_manual_0 @ get config addr - mov r5, #0x2 @ autorefresh command - str r5, [r4] @ kick off refreshes - ldr r4, sdrc_mr_1 @ get config addr - ldr r5, [r4] @ get value - str r5, [r4] @ write back change - ldr r4, sdrc_emr2_1 @ get config addr - ldr r5, [r4] @ get value - str r5, [r4] @ write back change - ldr r4, sdrc_manual_1 @ get config addr - mov r5, #0x2 @ autorefresh command - str r5, [r4] @ kick off refreshes - bx lr -sdrc_syscfg: - .word SDRC_SYSCONFIG_P -sdrc_mr_0: - .word SDRC_MR_0_P -sdrc_emr2_0: - .word SDRC_EMR2_0_P -sdrc_manual_0: - .word SDRC_MANUAL_0_P -sdrc_mr_1: - .word SDRC_MR_1_P -sdrc_emr2_1: - .word SDRC_EMR2_1_P -sdrc_manual_1: - .word SDRC_MANUAL_1_P -ENTRY(es3_sdrc_fix_sz) - .word . - es3_sdrc_fix + .text +/* + * L2 cache needs to be toggled for stable OFF mode functionality on 3630. + * This function sets up a flag that will allow for this toggling to take + * place on 3630. Hopefully some version in the future may not need this. + */ +ENTRY(enable_omap3630_toggle_l2_on_restore) + stmfd sp!, {lr} @ save registers on stack + /* Setup so that we will disable and enable l2 */ + mov r1, #0x1 + str r1, l2dis_3630 + ldmfd sp!, {pc} @ restore regs and return + .text /* Function to call rom code to save secure ram context */ ENTRY(save_secure_ram_context) stmfd sp!, {r1-r12, lr} @ save registers on stack -save_secure_ram_debug: - /* b save_secure_ram_debug */ @ enable to debug save code adr r3, api_params @ r3 points to parameters str r0, [r3,#0x4] @ r0 has sdram address ldr r12, high_mask @@ -185,35 +149,162 @@ ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context /* + * ====================== + * == Idle entry point == + * ====================== + */ + +/* * Forces OMAP into idle state * - * omap34xx_suspend() - This bit of code just executes the WFI - * for normal idles. + * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed + * and executes the WFI instruction. Calling WFI effectively changes the + * power domains states to the desired target power states. + * * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. + * Notes: + * - this code gets copied to internal SRAM at boot and after wake-up + * from OFF mode. The execution pointer in SRAM is _omap_sram_idle. + * - when the OMAP wakes up it continues at different execution points + * depending on the low power mode (non-OFF vs OFF modes), + * cf. 'Resume path for xxx mode' comments. */ ENTRY(omap34xx_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack -loop: - /*b loop*/ @Enable to debug by stepping through code - /* r0 contains restore pointer in sdram */ - /* r1 contains information about saving context */ - ldr r4, sdrc_power @ read the SDRC_POWER register - ldr r5, [r4] @ read the contents of SDRC_POWER - orr r5, r5, #0x40 @ enable self refresh on idle req - str r5, [r4] @ write back to SDRC_POWER register + stmfd sp!, {r0-r12, lr} @ save registers on stack + /* + * r0 contains restore pointer in sdram + * r1 contains information about saving context: + * 0 - No context lost + * 1 - Only L1 and logic lost + * 2 - Only L2 lost + * 3 - Both L1 and L2 lost + */ + + /* Directly jump to WFI is the context save is not required */ cmp r1, #0x0 - /* If context save is required, do that and execute wfi */ - bne save_context_wfi + beq omap3_do_wfi + + /* Otherwise fall through to the save context code */ +save_context_wfi: + mov r8, r0 @ Store SDRAM address in r8 + mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register + mov r4, #0x1 @ Number of parameters for restore call + stmia r8!, {r4-r5} @ Push parameters for restore call + mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register + stmia r8!, {r4-r5} @ Push parameters for restore call + + /* Check what that target sleep state is from r1 */ + cmp r1, #0x2 @ Only L2 lost, no need to save context + beq clean_caches + +l1_logic_lost: + /* Store sp and spsr to SDRAM */ + mov r4, sp + mrs r5, spsr + mov r6, lr + stmia r8!, {r4-r6} + /* Save all ARM registers */ + /* Coprocessor access control register */ + mrc p15, 0, r6, c1, c0, 2 + stmia r8!, {r6} + /* TTBR0, TTBR1 and Translation table base control */ + mrc p15, 0, r4, c2, c0, 0 + mrc p15, 0, r5, c2, c0, 1 + mrc p15, 0, r6, c2, c0, 2 + stmia r8!, {r4-r6} + /* + * Domain access control register, data fault status register, + * and instruction fault status register + */ + mrc p15, 0, r4, c3, c0, 0 + mrc p15, 0, r5, c5, c0, 0 + mrc p15, 0, r6, c5, c0, 1 + stmia r8!, {r4-r6} + /* + * Data aux fault status register, instruction aux fault status, + * data fault address register and instruction fault address register + */ + mrc p15, 0, r4, c5, c1, 0 + mrc p15, 0, r5, c5, c1, 1 + mrc p15, 0, r6, c6, c0, 0 + mrc p15, 0, r7, c6, c0, 2 + stmia r8!, {r4-r7} + /* + * user r/w thread and process ID, user r/o thread and process ID, + * priv only thread and process ID, cache size selection + */ + mrc p15, 0, r4, c13, c0, 2 + mrc p15, 0, r5, c13, c0, 3 + mrc p15, 0, r6, c13, c0, 4 + mrc p15, 2, r7, c0, c0, 0 + stmia r8!, {r4-r7} + /* Data TLB lockdown, instruction TLB lockdown registers */ + mrc p15, 0, r5, c10, c0, 0 + mrc p15, 0, r6, c10, c0, 1 + stmia r8!, {r5-r6} + /* Secure or non secure vector base address, FCSE PID, Context PID*/ + mrc p15, 0, r4, c12, c0, 0 + mrc p15, 0, r5, c13, c0, 0 + mrc p15, 0, r6, c13, c0, 1 + stmia r8!, {r4-r6} + /* Primary remap, normal remap registers */ + mrc p15, 0, r4, c10, c2, 0 + mrc p15, 0, r5, c10, c2, 1 + stmia r8!,{r4-r5} + + /* Store current cpsr*/ + mrs r2, cpsr + stmia r8!, {r2} + + mrc p15, 0, r4, c1, c0, 0 + /* save control register */ + stmia r8!, {r4} + +clean_caches: + /* + * Clean Data or unified cache to POU + * How to invalidate only L1 cache???? - #FIX_ME# + * mcr p15, 0, r11, c7, c11, 1 + */ + cmp r1, #0x1 @ Check whether L2 inval is required + beq omap3_do_wfi + +clean_l2: + /* + * jump out to kernel flush routine + * - reuse that code is better + * - it executes in a cached space so is faster than refetch per-block + * - should be faster and will change with kernel + * - 'might' have to copy address, load and jump to it + */ + ldr r1, kernel_flush + mov lr, pc + bx r1 + +omap3_do_wfi: + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + /* Data memory barrier and Data sync barrier */ mov r1, #0 mcr p15, 0, r1, c7, c10, 4 mcr p15, 0, r1, c7, c10, 5 +/* + * =================================== + * == WFI instruction => Enter idle == + * =================================== + */ wfi @ wait for interrupt +/* + * =================================== + * == Resume path for non-OFF modes == + * =================================== + */ nop nop nop @@ -226,9 +317,30 @@ loop: nop bl wait_sdrc_ok - ldmfd sp!, {r0-r12, pc} @ restore regs and return +/* + * =================================== + * == Exit point from non-OFF modes == + * =================================== + */ + ldmfd sp!, {r0-r12, pc} @ restore regs and return + + +/* + * ============================== + * == Resume path for OFF mode == + * ============================== + */ + +/* + * The restore_* functions are called by the ROM code + * when back from WFI in OFF mode. + * Cf. the get_*restore_pointer functions. + * + * restore_es3: applies to 34xx >= ES3.0 + * restore_3630: applies to 36xx + * restore: common code for 3xxx + */ restore_es3: - /*b restore_es3*/ @ Enable to debug restore code ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 @@ -245,82 +357,117 @@ copy_to_sram: bne copy_to_sram ldr r1, sram_base blx r1 + b restore + +restore_3630: + ldr r1, pm_prepwstst_core_p + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if previous power state of CORE is OFF + bne restore + /* Disable RTA before giving control */ + ldr r1, control_mem_rta + mov r2, #OMAP36XX_RTA_DISABLE + str r2, [r1] + + /* Fall through to common code for the remaining logic */ + restore: - /* b restore*/ @ Enable to debug restore code - /* Check what was the reason for mpu reset and store the reason in r9*/ - /* 1 - Only L1 and logic lost */ - /* 2 - Only L2 lost - In this case, we wont be here */ - /* 3 - Both L1 and L2 lost */ - ldr r1, pm_pwstctrl_mpu + /* + * Check what was the reason for mpu reset and store the reason in r9: + * 0 - No context lost + * 1 - Only L1 and logic lost + * 2 - Only L2 lost - In this case, we wont be here + * 3 - Both L1 and L2 lost + */ + ldr r1, pm_pwstctrl_mpu ldr r2, [r1] - and r2, r2, #0x3 - cmp r2, #0x0 @ Check if target power state was OFF or RET - moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore + + ldr r0, l2dis_3630 + cmp r0, #0x1 @ should we disable L2 on 3630? + bne skipl2dis + mrc p15, 0, r0, c1, c0, 1 + bic r0, r0, #2 @ disable L2 cache + mcr p15, 0, r0, c1, c0, 1 +skipl2dis: ldr r0, control_stat ldr r1, [r0] and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp - mov r0, #40 @ set service ID for PPA - mov r12, r0 @ copy secure Service ID in r12 - mov r1, #0 @ set task id for ROM code in r1 - mov r2, #4 @ set some flags in r2, r6 + mov r0, #40 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff adr r3, l2_inv_api_params @ r3 points to dummy parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) /* Write to Aux control register to set some bits */ - mov r0, #42 @ set service ID for PPA - mov r12, r0 @ copy secure Service ID in r12 - mov r1, #0 @ set task id for ROM code in r1 - mov r2, #4 @ set some flags in r2, r6 + mov r0, #42 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff ldr r4, scratchpad_base - ldr r3, [r4, #0xBC] @ r3 points to parameters + ldr r3, [r4, #0xBC] @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE /* Restore L2 aux control register */ - @ set service ID for PPA + @ set service ID for PPA mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID - mov r12, r0 @ copy service ID in r12 - mov r1, #0 @ set task ID for ROM code in r1 - mov r2, #4 @ set some flags in r2, r6 + mov r12, r0 @ copy service ID in r12 + mov r1, #0 @ set task ID for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff ldr r4, scratchpad_base ldr r3, [r4, #0xBC] - adds r3, r3, #8 @ r3 points to parameters + adds r3, r3, #8 @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) #endif b logic_l1_restore + l2_inv_api_params: - .word 0x1, 0x00 + .word 0x1, 0x00 l2_inv_gp: /* Execute smi to invalidate L2 cache */ - mov r12, #0x1 @ set up to invalide L2 -smi: .word 0xE1600070 @ Call SMI monitor (smieq) + mov r12, #0x1 @ set up to invalidate L2 + .word 0xE1600070 @ Call SMI monitor (smieq) /* Write to Aux control register to set some bits */ ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#4] mov r12, #0x3 - .word 0xE1600070 @ Call SMI monitor (smieq) + .word 0xE1600070 @ Call SMI monitor (smieq) ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#12] mov r12, #0x2 - .word 0xE1600070 @ Call SMI monitor (smieq) + .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: + ldr r1, l2dis_3630 + cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 + bne skipl2reen + mrc p15, 0, r1, c1, c0, 1 + orr r1, r1, #2 @ re-enable L2 cache + mcr p15, 0, r1, c1, c0, 1 +skipl2reen: mov r1, #0 - /* Invalidate all instruction caches to PoU - * and flush branch target cache */ + /* + * Invalidate all instruction caches to PoU + * and flush branch target cache + */ mcr p15, 0, r1, c7, c5, 0 ldr r4, scratchpad_base @@ -341,33 +488,33 @@ logic_l1_restore: MCR p15, 0, r6, c2, c0, 1 /* Translation table base control register */ MCR p15, 0, r7, c2, c0, 2 - /*domain access Control Register */ + /* Domain access Control Register */ MCR p15, 0, r8, c3, c0, 0 - /* data fault status Register */ + /* Data fault status Register */ MCR p15, 0, r9, c5, c0, 0 - ldmia r3!,{r4-r8} - /* instruction fault status Register */ + ldmia r3!,{r4-r8} + /* Instruction fault status Register */ MCR p15, 0, r4, c5, c0, 1 - /*Data Auxiliary Fault Status Register */ + /* Data Auxiliary Fault Status Register */ MCR p15, 0, r5, c5, c1, 0 - /*Instruction Auxiliary Fault Status Register*/ + /* Instruction Auxiliary Fault Status Register*/ MCR p15, 0, r6, c5, c1, 1 - /*Data Fault Address Register */ + /* Data Fault Address Register */ MCR p15, 0, r7, c6, c0, 0 - /*Instruction Fault Address Register*/ + /* Instruction Fault Address Register*/ MCR p15, 0, r8, c6, c0, 2 - ldmia r3!,{r4-r7} + ldmia r3!,{r4-r7} - /* user r/w thread and process ID */ + /* User r/w thread and process ID */ MCR p15, 0, r4, c13, c0, 2 - /* user ro thread and process ID */ + /* User ro thread and process ID */ MCR p15, 0, r5, c13, c0, 3 - /*Privileged only thread and process ID */ + /* Privileged only thread and process ID */ MCR p15, 0, r6, c13, c0, 4 - /* cache size selection */ + /* Cache size selection */ MCR p15, 2, r7, c0, c0, 0 - ldmia r3!,{r4-r8} + ldmia r3!,{r4-r8} /* Data TLB lockdown registers */ MCR p15, 0, r4, c10, c0, 0 /* Instruction TLB lockdown registers */ @@ -379,26 +526,27 @@ logic_l1_restore: /* Context PID */ MCR p15, 0, r8, c13, c0, 1 - ldmia r3!,{r4-r5} - /* primary memory remap register */ + ldmia r3!,{r4-r5} + /* Primary memory remap register */ MCR p15, 0, r4, c10, c2, 0 - /*normal memory remap register */ + /* Normal memory remap register */ MCR p15, 0, r5, c10, c2, 1 /* Restore cpsr */ - ldmia r3!,{r4} /*load CPSR from SDRAM*/ - msr cpsr, r4 /*store cpsr */ + ldmia r3!,{r4} @ load CPSR from SDRAM + msr cpsr, r4 @ store cpsr /* Enabling MMU here */ - mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ + mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ and r7, #0x7 cmp r7, #0x0 beq usettbr0 ttbr_error: - /* More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ + /* + * More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ b ttbr_error usettbr0: mrc p15, 0, r2, c2, c0, 0 @@ -406,21 +554,25 @@ usettbr0: and r2, r5 mov r4, pc ldr r5, table_index_mask - and r4, r5 /* r4 = 31 to 20 bits of pc */ + and r4, r5 @ r4 = 31 to 20 bits of pc /* Extract the value to be written to table entry */ ldr r1, table_entry - add r1, r1, r4 /* r1 has value to be written to table entry*/ + /* r1 has the value to be written to table entry*/ + add r1, r1, r4 /* Getting the address of table entry to modify */ lsr r4, #18 - add r2, r4 /* r2 has the location which needs to be modified */ + /* r2 has the location which needs to be modified */ + add r2, r4 /* Storing previous entry of location being modified */ ldr r5, scratchpad_base ldr r4, [r2] str r4, [r5, #0xC0] /* Modify the table entry */ str r1, [r2] - /* Storing address of entry being modified - * - will be restored after enabling MMU */ + /* + * Storing address of entry being modified + * - will be restored after enabling MMU + */ ldr r5, scratchpad_base str r2, [r5, #0xC4] @@ -429,8 +581,11 @@ usettbr0: mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - /* Restore control register but dont enable caches here*/ - /* Caches will be enabled after restoring MMU table entry */ + /* + * Restore control register. This enables the MMU. + * The caches and prediction are not enabled here, they + * will be enabled after restoring the MMU table entry. + */ ldmia r3!, {r4} /* Store previous value of control register in scratchpad */ str r4, [r5, #0xC8] @@ -438,212 +593,144 @@ usettbr0: and r4, r2 mcr p15, 0, r4, c1, c0, 0 - ldmfd sp!, {r0-r12, pc} @ restore regs and return -save_context_wfi: - /*b save_context_wfi*/ @ enable to debug save code - mov r8, r0 /* Store SDRAM address in r8 */ - mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register - mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} @ Push parameters for restore call - mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register - stmia r8!, {r4-r5} @ Push parameters for restore call - /* Check what that target sleep state is:stored in r1*/ - /* 1 - Only L1 and logic lost */ - /* 2 - Only L2 lost */ - /* 3 - Both L1 and L2 lost */ - cmp r1, #0x2 /* Only L2 lost */ - beq clean_l2 - cmp r1, #0x1 /* L2 retained */ - /* r9 stores whether to clean L2 or not*/ - moveq r9, #0x0 /* Dont Clean L2 */ - movne r9, #0x1 /* Clean L2 */ -l1_logic_lost: - /* Store sp and spsr to SDRAM */ - mov r4, sp - mrs r5, spsr - mov r6, lr - stmia r8!, {r4-r6} - /* Save all ARM registers */ - /* Coprocessor access control register */ - mrc p15, 0, r6, c1, c0, 2 - stmia r8!, {r6} - /* TTBR0, TTBR1 and Translation table base control */ - mrc p15, 0, r4, c2, c0, 0 - mrc p15, 0, r5, c2, c0, 1 - mrc p15, 0, r6, c2, c0, 2 - stmia r8!, {r4-r6} - /* Domain access control register, data fault status register, - and instruction fault status register */ - mrc p15, 0, r4, c3, c0, 0 - mrc p15, 0, r5, c5, c0, 0 - mrc p15, 0, r6, c5, c0, 1 - stmia r8!, {r4-r6} - /* Data aux fault status register, instruction aux fault status, - datat fault address register and instruction fault address register*/ - mrc p15, 0, r4, c5, c1, 0 - mrc p15, 0, r5, c5, c1, 1 - mrc p15, 0, r6, c6, c0, 0 - mrc p15, 0, r7, c6, c0, 2 - stmia r8!, {r4-r7} - /* user r/w thread and process ID, user r/o thread and process ID, - priv only thread and process ID, cache size selection */ - mrc p15, 0, r4, c13, c0, 2 - mrc p15, 0, r5, c13, c0, 3 - mrc p15, 0, r6, c13, c0, 4 - mrc p15, 2, r7, c0, c0, 0 - stmia r8!, {r4-r7} - /* Data TLB lockdown, instruction TLB lockdown registers */ - mrc p15, 0, r5, c10, c0, 0 - mrc p15, 0, r6, c10, c0, 1 - stmia r8!, {r5-r6} - /* Secure or non secure vector base address, FCSE PID, Context PID*/ - mrc p15, 0, r4, c12, c0, 0 - mrc p15, 0, r5, c13, c0, 0 - mrc p15, 0, r6, c13, c0, 1 - stmia r8!, {r4-r6} - /* Primary remap, normal remap registers */ - mrc p15, 0, r4, c10, c2, 0 - mrc p15, 0, r5, c10, c2, 1 - stmia r8!,{r4-r5} +/* + * ============================== + * == Exit point from OFF mode == + * ============================== + */ + ldmfd sp!, {r0-r12, pc} @ restore regs and return - /* Store current cpsr*/ - mrs r2, cpsr - stmia r8!, {r2} - mrc p15, 0, r4, c1, c0, 0 - /* save control register */ - stmia r8!, {r4} -clean_caches: - /* Clean Data or unified cache to POU*/ - /* How to invalidate only L1 cache???? - #FIX_ME# */ - /* mcr p15, 0, r11, c7, c11, 1 */ - cmp r9, #1 /* Check whether L2 inval is required or not*/ - bne skip_l2_inval -clean_l2: - /* read clidr */ - mrc p15, 1, r0, c0, c0, 1 - /* extract loc from clidr */ - ands r3, r0, #0x7000000 - /* left align loc bit field */ - mov r3, r3, lsr #23 - /* if loc is 0, then no need to clean */ - beq finished - /* start clean at cache level 0 */ - mov r10, #0 -loop1: - /* work out 3x current cache level */ - add r2, r10, r10, lsr #1 - /* extract cache type bits from clidr*/ - mov r1, r0, lsr r2 - /* mask of the bits for current cache only */ - and r1, r1, #7 - /* see what cache we have at this level */ - cmp r1, #2 - /* skip if no cache, or just i-cache */ - blt skip - /* select current cache level in cssr */ - mcr p15, 2, r10, c0, c0, 0 - /* isb to sych the new cssr&csidr */ - isb - /* read the new csidr */ - mrc p15, 1, r1, c0, c0, 0 - /* extract the length of the cache lines */ - and r2, r1, #7 - /* add 4 (line length offset) */ - add r2, r2, #4 - ldr r4, assoc_mask - /* find maximum number on the way size */ - ands r4, r4, r1, lsr #3 - /* find bit position of way size increment */ - clz r5, r4 - ldr r7, numset_mask - /* extract max number of the index size*/ - ands r7, r7, r1, lsr #13 -loop2: - mov r9, r4 - /* create working copy of max way size*/ -loop3: - /* factor way and cache number into r11 */ - orr r11, r10, r9, lsl r5 - /* factor index number into r11 */ - orr r11, r11, r7, lsl r2 - /*clean & invalidate by set/way */ - mcr p15, 0, r11, c7, c10, 2 - /* decrement the way*/ - subs r9, r9, #1 - bge loop3 - /*decrement the index */ - subs r7, r7, #1 - bge loop2 -skip: - add r10, r10, #2 - /* increment cache number */ - cmp r3, r10 - bgt loop1 -finished: - /*swith back to cache level 0 */ - mov r10, #0 - /* select current cache level in cssr */ - mcr p15, 2, r10, c0, c0, 0 - isb -skip_l2_inval: - /* Data memory barrier and Data sync barrier */ - mov r1, #0 - mcr p15, 0, r1, c7, c10, 4 - mcr p15, 0, r1, c7, c10, 5 +/* + * Internal functions + */ - wfi @ wait for interrupt - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop - bl wait_sdrc_ok - /* restore regs and return */ - ldmfd sp!, {r0-r12, pc} +/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ + .text +ENTRY(es3_sdrc_fix) + ldr r4, sdrc_syscfg @ get config addr + ldr r5, [r4] @ get value + tst r5, #0x100 @ is part access blocked + it eq + biceq r5, r5, #0x100 @ clear bit if set + str r5, [r4] @ write back change + ldr r4, sdrc_mr_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_0 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + ldr r4, sdrc_mr_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_1 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + bx lr + +sdrc_syscfg: + .word SDRC_SYSCONFIG_P +sdrc_mr_0: + .word SDRC_MR_0_P +sdrc_emr2_0: + .word SDRC_EMR2_0_P +sdrc_manual_0: + .word SDRC_MANUAL_0_P +sdrc_mr_1: + .word SDRC_MR_1_P +sdrc_emr2_1: + .word SDRC_EMR2_1_P +sdrc_manual_1: + .word SDRC_MANUAL_1_P +ENTRY(es3_sdrc_fix_sz) + .word . - es3_sdrc_fix + +/* + * This function implements the erratum ID i581 WA: + * SDRC state restore before accessing the SDRAM + * + * Only used at return from non-OFF mode. For OFF + * mode the ROM code configures the SDRC and + * the DPLL before calling the restore code directly + * from DDR. + */ /* Make sure SDRC accesses are ok */ wait_sdrc_ok: - ldr r4, cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 - cmp r5, #0 - bne wait_sdrc_ok - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] + +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ + ldr r4, cm_idlest_ckgen +wait_dpll3_lock: + ldr r5, [r4] + tst r5, #1 + beq wait_dpll3_lock + + ldr r4, cm_idlest1_core +wait_sdrc_ready: + ldr r5, [r4] + tst r5, #0x2 + bne wait_sdrc_ready + /* allow DLL powerdown upon hw idle req */ + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + +is_dll_in_lock_mode: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bxne lr @ Return if locked + /* wait till dll locks */ +wait_dll_lock_timed: + ldr r4, wait_dll_lock_counter + add r4, r4, #1 + str r4, wait_dll_lock_counter + ldr r4, sdrc_dlla_status + /* Wait 20uS for lock */ + mov r6, #8 wait_dll_lock: - /* Is dll in lock mode? */ - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - tst r5, #0x4 - bxne lr - /* wait till dll locks */ - ldr r4, sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 - bne wait_dll_lock - bx lr + subs r6, r6, #0x1 + beq kick_dll + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr @ Return when locked + + /* disable/reenable DLL if not locked */ +kick_dll: + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + mov r6, r5 + bic r6, #(1<<3) @ disable dll + str r6, [r4] + dsb + orr r6, r6, #(1<<3) @ enable dll + str r6, [r4] + dsb + ldr r4, kick_counter + add r4, r4, #1 + str r4, kick_counter + b wait_dll_lock_timed cm_idlest1_core: .word CM_IDLEST1_CORE_V +cm_idlest_ckgen: + .word CM_IDLEST_CKGEN_V sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V -pm_prepwstst_core: - .word PM_PREPWSTST_CORE_V pm_prepwstst_core_p: .word PM_PREPWSTST_CORE_P -pm_prepwstst_mpu: - .word PM_PREPWSTST_MPU_V pm_pwstctrl_mpu: .word PM_PWSTCTRL_MPU_P scratchpad_base: @@ -651,13 +738,7 @@ scratchpad_base: sram_base: .word SRAM_BASE_P + 0x8000 sdrc_power: - .word SDRC_POWER_V -clk_stabilize_delay: - .word 0x000001FF -assoc_mask: - .word 0x3ff -numset_mask: - .word 0x7fff + .word SDRC_POWER_V ttbrbit_mask: .word 0xFFFFC000 table_index_mask: @@ -668,5 +749,20 @@ cache_pred_disable_mask: .word 0xFFFFE7FB control_stat: .word CONTROL_STAT +control_mem_rta: + .word CONTROL_MEM_RTA_CTRL +kernel_flush: + .word v7_flush_dcache_all +l2dis_3630: + .word 0 + /* + * When exporting to userspace while the counters are in SRAM, + * these 2 words need to be at the end to facilitate retrival! + */ +kick_counter: + .word 0 +wait_dll_lock_counter: + .word 0 + ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend |