diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-perseus2.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-perseus2.c | 333 |
1 files changed, 0 insertions, 333 deletions
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c deleted file mode 100644 index b041e6f6e9cf..000000000000 --- a/arch/arm/mach-omap1/board-perseus2.c +++ /dev/null @@ -1,333 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-perseus2.c - * - * Modified from board-generic.c - * - * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> - * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/soc/ti/omap1-io.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -static const unsigned int p2_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_LEFT), - KEY(3, 0, KEY_DOWN), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_F10), - KEY(1, 1, KEY_SEND), - KEY(2, 1, KEY_END), - KEY(3, 1, KEY_VOLUMEDOWN), - KEY(4, 1, KEY_VOLUMEUP), - KEY(5, 1, KEY_RECORD), - KEY(0, 2, KEY_F9), - KEY(1, 2, KEY_3), - KEY(2, 2, KEY_6), - KEY(3, 2, KEY_9), - KEY(4, 2, KEY_KPDOT), - KEY(0, 3, KEY_BACK), - KEY(1, 3, KEY_2), - KEY(2, 3, KEY_5), - KEY(3, 3, KEY_8), - KEY(4, 3, KEY_0), - KEY(5, 3, KEY_KPSLASH), - KEY(0, 4, KEY_HOME), - KEY(1, 4, KEY_1), - KEY(2, 4, KEY_4), - KEY(3, 4, KEY_7), - KEY(4, 4, KEY_KPASTERISK), - KEY(5, 4, KEY_POWER), -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ - .end = H2P2_DBG_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_7XX_MPU_EXT_NIRQ, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - }, -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - }, -}; - -static struct resource nand_resource = { - .start = OMAP_CS3_PHYS, - .end = OMAP_CS3_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_data, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data p2_keymap_data = { - .keymap = p2_keymap, - .keymap_size = ARRAY_SIZE(p2_keymap), -}; - -static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &p2_keymap_data, - .delay = 4, - .dbounce = true, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &kp_device, -}; - -static const struct omap_lcd_config perseus2_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init perseus2_init_smc91x(void) -{ - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - -static void __init omap_perseus2_init(void) -{ - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, - OMAP7XX_IO_CONF_9); - - perseus2_init_smc91x(); - - BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(P2_NAND_RB_GPIO_PIN); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* Mux pins for keypad */ - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - - if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) { - /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&perseus2_lcd_config); -} - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc omap_perseus2_io_desc[] __initdata = { - { - .virtual = H2P2_DBG_FPGA_BASE, - .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), - .length = H2P2_DBG_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static void __init omap_perseus2_map_io(void) -{ - omap7xx_map_io(); - iotable_init(omap_perseus2_io_desc, - ARRAY_SIZE(omap_perseus2_io_desc)); -} - -MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .atag_offset = 0x100, - .map_io = omap_perseus2_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_perseus2_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END |