diff options
Diffstat (limited to 'arch/arm/mach-ebsa110/core.c')
| -rw-r--r-- | arch/arm/mach-ebsa110/core.c | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c deleted file mode 100644 index 5960e3dfd2bf..000000000000 --- a/arch/arm/mach-ebsa110/core.c +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-ebsa110/core.c - * - * Copyright (C) 1998-2001 Russell King - * - * Extra MM routines for the EBSA-110 architecture - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/serial_8250.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include <asm/mach/time.h> - -#include "core.h" - -static void ebsa110_mask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MCLR); -} - -static void ebsa110_unmask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MSET); -} - -static struct irq_chip ebsa110_irq_chip = { - .irq_ack = ebsa110_mask_irq, - .irq_mask = ebsa110_mask_irq, - .irq_unmask = ebsa110_unmask_irq, -}; - -static void __init ebsa110_init_irq(void) -{ - unsigned long flags; - unsigned int irq; - - local_irq_save(flags); - __raw_writeb(0xff, IRQ_MCLR); - __raw_writeb(0x55, IRQ_MSET); - __raw_writeb(0x00, IRQ_MSET); - if (__raw_readb(IRQ_MASK) != 0x55) - while (1); - __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */ - local_irq_restore(flags); - - for (irq = 0; irq < NR_IRQS; irq++) { - irq_set_chip_and_handler(irq, &ebsa110_irq_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } -} - -static struct map_desc ebsa110_io_desc[] __initdata = { - /* - * sparse external-decode ISAIO space - */ - { /* IRQ_STAT/IRQ_MCLR */ - .virtual = (unsigned long)IRQ_STAT, - .pfn = __phys_to_pfn(TRICK4_PHYS), - .length = TRICK4_SIZE, - .type = MT_DEVICE - }, { /* IRQ_MASK/IRQ_MSET */ - .virtual = (unsigned long)IRQ_MASK, - .pfn = __phys_to_pfn(TRICK3_PHYS), - .length = TRICK3_SIZE, - .type = MT_DEVICE - }, { /* SOFT_BASE */ - .virtual = (unsigned long)SOFT_BASE, - .pfn = __phys_to_pfn(TRICK1_PHYS), - .length = TRICK1_SIZE, - .type = MT_DEVICE - }, { /* PIT_BASE */ - .virtual = (unsigned long)PIT_BASE, - .pfn = __phys_to_pfn(TRICK0_PHYS), - .length = TRICK0_SIZE, - .type = MT_DEVICE - }, - - /* - * self-decode ISAIO space - */ - { - .virtual = ISAIO_BASE, - .pfn = __phys_to_pfn(ISAIO_PHYS), - .length = ISAIO_SIZE, - .type = MT_DEVICE - }, { - .virtual = ISAMEM_BASE, - .pfn = __phys_to_pfn(ISAMEM_PHYS), - .length = ISAMEM_SIZE, - .type = MT_DEVICE - } -}; - -static void __init ebsa110_map_io(void) -{ - iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc)); -} - -static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size, - unsigned int flags, void *caller) -{ - return (void __iomem *)cookie; -} - -static void ebsa110_iounmap(volatile void __iomem *io_addr) -{} - -static void __init ebsa110_init_early(void) -{ - arch_ioremap_caller = ebsa110_ioremap_caller; - arch_iounmap = ebsa110_iounmap; -} - -#define PIT_CTRL (PIT_BASE + 0x0d) -#define PIT_T2 (PIT_BASE + 0x09) -#define PIT_T1 (PIT_BASE + 0x05) -#define PIT_T0 (PIT_BASE + 0x01) - -/* - * This is the rate at which your MCLK signal toggles (in Hz) - * This was measured on a 10 digit frequency counter sampling - * over 1 second. - */ -#define MCLK 47894000 - -/* - * This is the rate at which the PIT timers get clocked - */ -#define CLKBY7 (MCLK / 7) - -/* - * This is the counter value. We tick at 200Hz on this platform. - */ -#define COUNT ((CLKBY7 + (HZ / 2)) / HZ) - -/* - * Get the time offset from the system PIT. Note that if we have missed an - * interrupt, then the PIT counter will roll over (ie, be negative). - * This actually works out to be convenient. - */ -static u32 ebsa110_gettimeoffset(void) -{ - unsigned long offset, count; - - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - /* - * If count > COUNT, make the number negative. - */ - if (count > COUNT) - count |= 0xffff0000; - - offset = COUNT; - offset -= count; - - /* - * `offset' is in units of timer counts. Convert - * offset to units of microseconds. - */ - offset = offset * (1000000 / HZ) / COUNT; - - return offset * 1000; -} - -static irqreturn_t -ebsa110_timer_interrupt(int irq, void *dev_id) -{ - u32 count; - - /* latch and read timer 1 */ - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - count += COUNT; - - __raw_writeb(count & 0xff, PIT_T1); - __raw_writeb(count >> 8, PIT_T1); - - timer_tick(); - - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt. - */ -void __init ebsa110_timer_init(void) -{ - int irq = IRQ_EBSA110_TIMER0; - - arch_gettimeoffset = ebsa110_gettimeoffset; - - /* - * Timer 1, mode 2, LSB/MSB - */ - __raw_writeb(0x70, PIT_CTRL); - __raw_writeb(COUNT & 0xff, PIT_T1); - __raw_writeb(COUNT >> 8, PIT_T1); - - if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, - "EBSA110 Timer Tick", NULL)) - pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq); -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = 1, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = 2, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct resource am79c961_resources[] = { - { - .start = 0x220, - .end = 0x238, - .flags = IORESOURCE_IO, - }, { - .start = IRQ_EBSA110_ETHERNET, - .end = IRQ_EBSA110_ETHERNET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am79c961_device = { - .name = "am79c961", - .id = -1, - .num_resources = ARRAY_SIZE(am79c961_resources), - .resource = am79c961_resources, -}; - -static struct platform_device *ebsa110_devices[] = { - &serial_device, - &am79c961_device, -}; - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static void ebsa110_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -static int __init ebsa110_init(void) -{ - arm_pm_idle = ebsa110_idle; - return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); -} - -arch_initcall(ebsa110_init); - -static void ebsa110_restart(enum reboot_mode mode, const char *cmd) -{ - soft_restart(0x80000000); -} - -MACHINE_START(EBSA110, "EBSA110") - /* Maintainer: Russell King */ - .atag_offset = 0x400, - .reserve_lp0 = 1, - .reserve_lp2 = 1, - .map_io = ebsa110_map_io, - .init_early = ebsa110_init_early, - .init_irq = ebsa110_init_irq, - .init_time = ebsa110_timer_init, - .restart = ebsa110_restart, -MACHINE_END |