diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-da850-evm.c')
-rw-r--r-- | arch/arm/mach-davinci/board-da850-evm.c | 96 |
1 files changed, 90 insertions, 6 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b01fb2ab944a..a7b41bf505f1 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -29,6 +29,8 @@ #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> #include <linux/input/tps6507x-ts.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,6 +40,7 @@ #include <mach/nand.h> #include <mach/mux.h> #include <mach/aemif.h> +#include <mach/spi.h> #define DA850_EVM_PHY_ID "0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) @@ -48,6 +51,70 @@ #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) +static struct mtd_partition da850evm_spiflash_part[] = { + [0] = { + .name = "UBL", + .offset = 0, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "U-Boot-Env", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [3] = { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M + SZ_512K, + .mask_flags = 0, + }, + [4] = { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + [5] = { + .name = "MAC-Address", + .offset = SZ_8M - SZ_64K, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct flash_platform_data da850evm_spiflash_data = { + .name = "m25p80", + .parts = da850evm_spiflash_part, + .nr_parts = ARRAY_SIZE(da850evm_spiflash_part), + .type = "m25p64", +}; + +static struct davinci_spi_config da850evm_spiflash_cfg = { + .io_type = SPI_IO_TYPE_DMA, + .c2tdelay = 8, + .t2cdelay = 8, +}; + +static struct spi_board_info da850evm_spi_info[] = { + { + .modalias = "m25p80", + .platform_data = &da850evm_spiflash_data, + .controller_data = &da850evm_spiflash_cfg, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 1, + .chip_select = 0, + }, +}; + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -231,8 +298,6 @@ static const short da850_evm_nor_pins[] = { -1 }; -static u32 ui_card_detected; - #if defined(CONFIG_MMC_DAVINCI) || \ defined(CONFIG_MMC_DAVINCI_MODULE) #define HAS_MMC 1 @@ -244,7 +309,7 @@ static inline void da850_evm_setup_nor_nand(void) { int ret = 0; - if (ui_card_detected & !HAS_MMC) { + if (!HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) pr_warning("da850_evm_init: nand mux setup failed: " @@ -394,7 +459,6 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, goto exp_setup_keys_fail; } - ui_card_detected = 1; pr_info("DA850/OMAP-L138 EVM UI card detected\n"); da850_evm_setup_nor_nand(); @@ -664,6 +728,13 @@ static struct snd_platform_data da850_evm_snd_data = { .rxnumevt = 1, }; +static const short da850_evm_mcasp_pins[] __initconst = { + DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, + DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, + DA850_AXR_11, DA850_AXR_12, + -1 +}; + static int da850_evm_mmc_get_ro(int index) { return gpio_get_value(DA850_MMCSD_WP_PIN); @@ -683,6 +754,13 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static const short da850_evm_mmcsd0_pins[] __initconst = { + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + DA850_GPIO4_0, DA850_GPIO4_1, + -1 +}; + static void da850_panel_power_ctrl(int val) { /* lcd backlight */ @@ -1070,7 +1148,7 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - ret = davinci_cfg_reg_list(da850_mmcsd0_pins); + ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" " %d\n", ret); @@ -1106,7 +1184,7 @@ static __init void da850_evm_init(void) __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); - ret = davinci_cfg_reg_list(da850_mcasp_pins); + ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); if (ret) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); @@ -1153,6 +1231,12 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: suspend registration failed: %d\n", ret); + + ret = da8xx_register_spi(1, da850evm_spi_info, + ARRAY_SIZE(da850evm_spi_info)); + if (ret) + pr_warning("da850_evm_init: spi 1 registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE |