summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/am335x-shc.dts2
-rw-r--r--arch/arm/boot/dts/da850.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6q-pistachio.dts2
-rw-r--r--arch/arm/boot/dts/imx6sll-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi2
-rw-r--r--arch/arm/boot/dts/meson.dtsi2
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts3
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts4
-rw-r--r--arch/arm/boot/dts/meson8m2-mxiii-plus.dts3
-rw-r--r--arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts2
-rw-r--r--arch/arm/boot/dts/omap3-n950-n9.dtsi42
-rw-r--r--arch/arm/boot/dts/omap5-l4.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi36
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi1
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts2
-rw-r--r--arch/arm/boot/dts/vf610-bk4.dts4
18 files changed, 73 insertions, 44 deletions
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index d0fd68873689..5b250060f6dd 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -215,7 +215,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
bus-width = <0x4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
cd-inverted;
max-frequency = <26000000>;
vmmc-supply = <&vmmcsd_fixed>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 47aa53ba6b92..559659b399d0 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -476,7 +476,7 @@
clocksource: timer@20000 {
compatible = "ti,da830-timer";
reg = <0x20000 0x1000>;
- interrupts = <12>, <13>;
+ interrupts = <21>, <22>;
interrupt-names = "tint12", "tint34";
clocks = <&pll0_auxclk>;
};
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index 5edf858c8b86..a31b17eaf51c 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -103,7 +103,7 @@
power {
label = "Power Button";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
linux,code = <KEY_POWER>;
};
};
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index d8163705363e..4a31a415f88e 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -309,7 +309,7 @@
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
vmmc-supply = <&reg_sd3_vmmc>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 272ff6133ec1..d1375d3650fd 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -467,7 +467,7 @@
};
gpt: gpt@2098000 {
- compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+ compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_GPT_BUS>,
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index e4645f612712..2ab74860d962 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -274,7 +274,7 @@
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
0xc1108108 0x4>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 0872f6e3abf5..d50fc2f60fa3 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -205,8 +205,7 @@
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 58669abda259..0f0a46ddf3ff 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -221,7 +221,6 @@
/* Realtek RTL8211F (0x001cc916) */
eth_phy: ethernet-phy@0 {
reg = <0>;
- eee-broken-1000t;
interrupt-parent = <&gpio_intc>;
/* GPIOH_3 */
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -273,8 +272,7 @@
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index f5853610b20b..6ac02beb5fa7 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -206,8 +206,7 @@
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index ddc7a7bb33c0..f57acf8f66b9 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -105,7 +105,7 @@
interrupts-extended = <
&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
- &cpcap 48 1
+ &cpcap 48 0
>;
interrupt-names =
"id_ground", "id_float", "se0conn", "vbusvld",
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e53d32691308..93b420934e8e 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -714,11 +714,7 @@
vdda-supply = <&vdac>;
- #address-cells = <1>;
- #size-cells = <0>;
-
port {
- reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
ti,channels = <1>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 182a53991c90..826920e6b878 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -814,7 +814,7 @@
/* For debugging, it is often good idea to remove this GPIO.
It means you can remove back cover (to reboot by removing
battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+ cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 0d9b85317529..e142e6c70a59 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -370,6 +370,19 @@
compatible = "ti,omap2-onenand";
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+ /*
+ * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+ * bootloader set values when booted with v4.19 using both N950
+ * and N9 devices (OneNAND Manufacturer: Samsung):
+ *
+ * gpmc cs0 before gpmc_cs_program_settings:
+ * cs0 GPMC_CS_CONFIG1: 0xfd001202
+ * cs0 GPMC_CS_CONFIG2: 0x00181800
+ * cs0 GPMC_CS_CONFIG3: 0x00030300
+ * cs0 GPMC_CS_CONFIG4: 0x18001804
+ * cs0 GPMC_CS_CONFIG5: 0x03171d1d
+ * cs0 GPMC_CS_CONFIG6: 0x97080000
+ */
gpmc,sync-read;
gpmc,sync-write;
gpmc,burst-length = <16>;
@@ -379,26 +392,27 @@
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <87>;
- gpmc,cs-wr-off-ns = <87>;
+ gpmc,cs-rd-off-ns = <122>;
+ gpmc,cs-wr-off-ns = <122>;
gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <10>;
- gpmc,adv-wr-off-ns = <10>;
- gpmc,oe-on-ns = <15>;
- gpmc,oe-off-ns = <87>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <15>;
+ gpmc,oe-on-ns = <20>;
+ gpmc,oe-off-ns = <122>;
gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <87>;
- gpmc,rd-cycle-ns = <112>;
- gpmc,wr-cycle-ns = <112>;
- gpmc,access-ns = <81>;
+ gpmc,we-off-ns = <122>;
+ gpmc,rd-cycle-ns = <148>;
+ gpmc,wr-cycle-ns = <148>;
+ gpmc,access-ns = <117>;
gpmc,page-burst-access-ns = <15>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <5>;
- gpmc,wr-data-mux-bus-ns = <30>;
- gpmc,wr-access-ns = <81>;
- gpmc,sync-clk-ps = <15000>;
+ gpmc,clk-activation-ns = <10>;
+ gpmc,wr-data-mux-bus-ns = <40>;
+ gpmc,wr-access-ns = <117>;
+
+ gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
/*
* MTD partition table corresponding to Nokia's MeeGo 1.2
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 9c7e309d9c2c..0960348002ad 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -1046,8 +1046,6 @@
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
- ti,no-reset-on-init;
- ti,no-idle-on-init;
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
clock-names = "fck";
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 3cc33f7ff7fe..3adc158a40bb 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1681,15 +1681,12 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7743";
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 726>;
- clock-names = "du.0", "du.1", "lvds.0";
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
status = "disabled";
ports {
@@ -1704,6 +1701,33 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7743-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 353d90f99b40..13304b8c5139 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -216,6 +216,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
osc32k: clk-32k {
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 5d23667dc2d2..25540b7694d5 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -53,7 +53,7 @@
aliases {
serial0 = &uart0;
- /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet0 = &emac;
ethernet1 = &sdiowifi;
};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index 689c8930dce3..b08d561d6748 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -110,11 +110,11 @@
bus-num = <3>;
status = "okay";
spi-slave;
+ #address-cells = <0>;
- slave@0 {
+ slave {
compatible = "lwn,bk4";
spi-max-frequency = <30000000>;
- reg = <0>;
};
};
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 07:47:42 +0000