diff options
Diffstat (limited to 'arch/arm/boot/dts')
75 files changed, 990 insertions, 226 deletions
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed912ee..c3255e0c90aa 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { @@ -300,3 +301,11 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-inverted; }; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 83d40f7655e5..6b8493720424 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,11 +24,3 @@ &mmc1 { vmmc-supply = <&ldo3_reg>; }; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 7266a00aab2e..5c5667a3624d 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -328,6 +328,10 @@ dual_emac_res_vlan = <3>; }; +&phy_sel { + rmii-clock-ext; +}; + &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce7d6fb..071b56aa0c7e 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 1943fc333e7c..8a099bc10c1e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -15,7 +15,7 @@ / { compatible = "ti,am4372", "ti,am43"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { @@ -48,6 +48,15 @@ #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; l2-cache-controller@48242000 { diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index f84d9715a4a9..26956cb50835 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -352,7 +352,6 @@ reg = <0x24>; compatible = "ti,tps65218"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f9a17e2ca8cb..0198f5a62b96 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,20 +133,6 @@ >; }; - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ - >; - }; - - i2c1_pins_sleep: i2c1_pins_sleep { - pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ - >; - }; - mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -254,7 +240,7 @@ status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c0_pins_default>; - pinctrl-1 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; at24@50 { @@ -262,17 +248,10 @@ pagesize = <64>; reg = <0x50>; }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_default>; - pinctrl-1 = <&i2c1_pins_default>; - clock-frequency = <400000>; tps: tps62362@60 { compatible = "ti,tps62362"; + reg = <0x60>; regulator-name = "VDD_MPU"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1330000>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 832d24318f62..8ae29c955c11 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -392,7 +392,6 @@ tps@24 { compatible = "ti,tps65218"; reg = <0x24>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 257c099c347e..1d7109196872 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -369,7 +369,6 @@ reg = <0x24>; compatible = "ti,tps65218"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9dab93a4..cfb49686ab6a 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 03750af3b49a..bd48dba16748 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -454,7 +454,6 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */ pinctrl-names = "default"; @@ -477,7 +476,7 @@ &uart3 { status = "okay"; - interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x248>; pinctrl-names = "default"; @@ -549,14 +548,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb2 { dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index fff0ee69aab4..62d25b14deb8 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -494,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; @@ -842,7 +842,7 @@ }; macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -853,7 +853,7 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -976,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e247b0b5fdab..d55fdf2487ef 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -124,11 +124,12 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&udc_clk>, <&udpck>; - clock-names = "usb_clk", "udc_clk", "udpck"; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + atmel,matrix = <&matrix>; status = "disabled"; }; @@ -262,7 +263,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix"; + compatible = "atmel,at91sam9260-bus-matrix", "syscon"; reg = <0xffffee00 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1f67bb4c144e..e4f61a979a57 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -69,7 +69,7 @@ sram1: sram@00500000 { compatible = "mmio-sram"; - reg = <0x00300000 0x4000>; + reg = <0x00500000 0x4000>; }; ahb { @@ -845,7 +845,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -856,7 +856,7 @@ }; usb1: gadget@fff78000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -905,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ee80aa9c0759..8ec05b11298a 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -956,7 +956,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -1116,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1301,7 +1300,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index c2666a7cb5b1..0c53a375ba99 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -894,7 +894,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 818dabdd8c0e..d221179d0f1a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1066,7 +1066,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&usb>, <&udphs_clk>; + clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1130,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1186,7 +1185,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 57e89d1d0325..73d7e30965ba 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -53,7 +53,7 @@ }; macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 663676c02861..d81980c40c7d 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d0289ad4d..afe678f6d2e9 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -35,6 +35,32 @@ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ >; }; + + mmc_pins: pinmux_mmc_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ + DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ + DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ + DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ + DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ + DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ + DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; }; &i2c1 { @@ -125,5 +151,23 @@ }; &mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7de380..f35715bc6992 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -129,17 +150,27 @@ }; gpio1: gpio@48032000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; + ti,gpio-always-on; reg = <0x48032000 0x1000>; - interrupts = <97>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio@4804c000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; + ti,gpio-always-on; reg = <0x4804c000 0x1000>; - interrupts = <99>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpmc: gpmc@50000000 { @@ -357,7 +388,10 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; @@ -366,13 +400,15 @@ usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 746cddb1b8f5..b1bd06c6c2a8 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -263,17 +263,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; @@ -446,7 +444,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x3e0>; }; @@ -543,14 +541,6 @@ }; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5827fedafd43..a0afce7ad482 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -13,14 +13,13 @@ #include "skeleton.dtsi" #define MAX_SOURCES 400 -#define DIRECT_IRQ(irq) (MAX_SOURCES + irq) / { #address-cells = <1>; #size-cells = <1>; compatible = "ti,dra7xx"; - interrupt-parent = <&gic>; + interrupt-parent = <&crossbar_mpu>; aliases { i2c0 = &i2c1; @@ -50,18 +49,27 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - arm,routable-irqs = <192>; reg = <0x48211000 0x1000>, <0x48212000 0x1000>, <0x48214000 0x2000>, <0x48216000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -91,8 +99,8 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; @@ -249,8 +257,8 @@ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -344,7 +352,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -355,7 +363,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -366,7 +374,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -377,7 +385,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -388,7 +396,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -399,7 +407,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -410,7 +418,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -419,7 +427,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -428,7 +436,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -437,7 +445,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; @@ -1090,8 +1098,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; @@ -1111,7 +1119,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie1-phy"; }; pcie2_phy: pciephy@4a095000 { @@ -1130,7 +1137,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie2-phy"; status = "disabled"; }; }; @@ -1337,9 +1343,12 @@ status = "disabled"; }; - crossbar_mpu: crossbar@4a020000 { + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; + interrupt-controller; + interrupt-parent = <&wakeupgen>; + #interrupt-cells = <3>; ti,max-irqs = <160>; ti,max-crossbar-sources = <MAX_SOURCES>; ti,reg-size = <2>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4d8711713610..daf28110d487 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -119,17 +119,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; @@ -160,7 +158,6 @@ pinctrl-0 = <&tps65917_pins_default>; interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; @@ -380,14 +377,6 @@ phy-supply = <&ldo4_reg>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index e5a3d23a3df1..f7fb0d0ef25a 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -25,6 +25,7 @@ pmu { compatible = "arm,cortex-a15-pmu"; - interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&wakeupgen>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 10173fab1a15..00eeed789b4b 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -41,8 +41,9 @@ pmu { compatible = "arm,cortex-a15-pmu"; - interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&wakeupgen>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; }; ocp { diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd61ce47..99b09a44e269 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 277b48b0b6f9..14ab515aa83c 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -18,6 +18,7 @@ */ #include "skeleton.dtsi" +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -130,6 +131,9 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos3250-pmu", "syscon"; reg = <0x10020000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; mipi_phy: video-phy@10020710 { @@ -184,6 +188,7 @@ compatible = "samsung,exynos3250-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -193,6 +198,7 @@ interrupts = <0 216 0>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi new file mode 100644 index 000000000000..735cb2f10817 --- /dev/null +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -0,0 +1,52 @@ +/* + * Device tree sources for Exynos4 thermal zone + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + }; + map1 { + trip = <&cpu_alert1>; + }; + }; + }; +}; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 76173cacd450..e20cdc24c3bb 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + i2c8 = &i2c_8; csis0 = &csis_0; csis1 = &csis_1; fimc0 = &fimc_0; @@ -104,6 +105,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; }; pd_cam: cam-power-domain@10023C00 { @@ -152,6 +154,9 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos4210-pmu", "syscon"; reg = <0x10020000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; dsi_0: dsi@11C80000 { @@ -264,6 +269,7 @@ rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; + interrupt-parent = <&pmu_system_controller>; interrupts = <0 44 0>, <0 45 0>; clocks = <&clock CLK_RTC>; clock-names = "rtc"; @@ -554,6 +560,22 @@ status = "disabled"; }; + i2c_8: i2c@138E0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <0 93 0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; + spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; @@ -663,6 +685,33 @@ status = "disabled"; }; + tmu: tmu@100C0000 { + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <0 92 0>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", + "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <0 91 0>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + status = "disabled"; + }; + ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3d6652a4b6cb..32c5fd8f6269 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -426,6 +426,25 @@ status = "okay"; }; + tmu@100C0000 { + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index b57e6b82ea20..d4f2b11319dd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -505,6 +505,63 @@ assigned-clock-rates = <0>, <160000000>; }; }; + + hdmi_en: voltage-regulator-hdmi-5v { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpe0 1 0>; + enable-active-high; + }; + + hdmi_ddc: i2c-ddc { + compatible = "i2c-gpio"; + gpios = <&gpe4 2 0 &gpe4 3 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_ddc_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <0>; + }; +}; + +&pinctrl_0 { + i2c_ddc_bus: i2c-ddc-bus { + samsung,pins = "gpe4-2", "gpe4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 67c832c9dcf1..be89f83f70e7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -21,6 +21,7 @@ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4210", "samsung,exynos4"; @@ -35,10 +36,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@900 { + cpu0: cpu@900 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + cooling-min-level = <4>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@901 { @@ -153,16 +157,38 @@ reg = <0x03860000 0x1000>; }; - tmu@100C0000 { + tmu: tmu@100C0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; + }; + }; + g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; @@ -203,6 +229,14 @@ }; }; + mixer: mixer@12C10000 { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; + }; + ppmu_lcd1: ppmu_lcd1@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index dd0a43ec56da..5be03288f1ee 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index de80b5bba204..adb4f6a97a1d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -249,6 +249,20 @@ regulator-always-on; }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo11_reg: LDO11 { regulator-name = "VDD18_ABB1_1.8V"; regulator-min-microvolt = <1800000>; @@ -411,6 +425,51 @@ ehci: ehci@12580000 { status = "okay"; }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + mixer: mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + hdmi_ddc: i2c@13880000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + }; + + i2c@138E0000 { + status = "okay"; + }; }; &pinctrl_1 { @@ -425,4 +484,9 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..e3f7934d19d0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 21f748083586..173ffa479ad3 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -927,6 +927,21 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 0f6ec93bb1d8..68ad43b391ae 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index f5e0ae780d6c..6a6abe14fd9b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -19,6 +19,7 @@ #include "exynos4.dtsi" #include "exynos4x12-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { aliases { @@ -297,4 +298,15 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4212-hdmi"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 9bb1b0b738f5..77f656eb8e6b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" - +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> / { @@ -58,11 +58,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cooling-min-level = <15>; + cooling-max-level = <9>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -102,6 +105,12 @@ #power-domain-cells = <0>; }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; @@ -196,6 +205,9 @@ clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; sysreg_system_controller: syscon@10050000 { @@ -232,15 +244,36 @@ rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; - tmu@10060000 { + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; serial@12C00000 { @@ -719,6 +752,7 @@ hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, @@ -731,9 +765,11 @@ mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { @@ -743,6 +779,7 @@ }; dp: dp-controller@145B0000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; @@ -750,6 +787,7 @@ }; fimd: fimd@14400000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi new file mode 100644 index 000000000000..5d31fc140823 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -0,0 +1,35 @@ +/* + * Device tree sources for default Exynos5420 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-1 { + temperature = <103000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1200000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 9dc2e9773b30..b3d2d53820e3 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -327,6 +327,7 @@ rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -740,8 +741,9 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; }; @@ -769,6 +771,9 @@ clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; sysreg_system_controller: syscon@10050000 { @@ -782,6 +787,7 @@ interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -790,6 +796,7 @@ interrupts = <0 183 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -798,6 +805,7 @@ interrupts = <0 184 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -806,6 +814,7 @@ interrupts = <0 185 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -814,6 +823,30 @@ interrupts = <0 215 0>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" + }; }; watchdog: watchdog@101D0000 { diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..7b2fba0ae92b --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 000000000000..48adfa8f4300 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8f3373cd7b87..59d9416b3b03 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -219,6 +219,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_1: tmuctrl@16011C { @@ -227,6 +228,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_2: tmuctrl@160120 { @@ -235,6 +237,22 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmuctrl_0>; + #include "exynos5440-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmuctrl_1>; + #include "exynos5440-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmuctrl_2>; + #include "exynos5440-trip-points.dtsi" + }; }; sata@210000 { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f1cd2147421d..a626e6dd8022 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -35,6 +35,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator@1 { @@ -45,6 +46,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_audio: regulator@2 { diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index fda4932faefd..945887d3fdb3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -52,6 +52,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_otg2_vbus: regulator@1 { @@ -62,6 +63,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 2 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_aud3v: regulator@2 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c297bb30..578fa2a54dce 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 60403273f83e..db80f9d376fa 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -16,6 +16,13 @@ model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -704,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b71111bd55..3fdc84fddb70 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -92,6 +92,8 @@ ti,hwmods = "aes"; reg = <0x480c5000 0x50>; interrupts = <0>; + dmas = <&sdma 65 &sdma 66>; + dma-names = "tx", "rx"; }; prm: prm@48306000 { @@ -155,8 +157,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; + dma-channels = <32>; + dma-requests = <96>; }; omap3_pmx_core: pinmux@48002030 { @@ -550,6 +552,8 @@ ti,hwmods = "sham"; reg = <0x480c3000 0x64>; interrupts = <49>; + dmas = <&sdma 69>; + dma-names = "rx"; }; smartreflex_core: smartreflex@480cb000 { diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index e860ccd9d09c..f2a94fa62552 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -173,14 +173,12 @@ twl: twl@48 { reg = <0x48>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { compatible = "ti,twl6040"; reg = <0x4b>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ vio-supply = <&v1v8>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 150513506c19..7c15fb2e2fe4 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -372,7 +372,6 @@ reg = <0x48>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -384,7 +383,6 @@ /* IRQ# = 119 */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; @@ -479,17 +477,17 @@ }; &uart2 { - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; }; &uart3 { - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART3_RX>; }; &uart4 { - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART4_RX>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3e1da43068f6..8aca8dae968a 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -363,7 +363,6 @@ reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -375,7 +374,6 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ vio-supply = <&v1v8>; @@ -570,21 +568,21 @@ }; &uart2 { - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 062701e1a898..a4f1ba2e1903 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -185,7 +185,6 @@ reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -197,7 +196,6 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ vio-supply = <&v1v8>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147cebae4..f2091d1c9c36 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -14,7 +14,7 @@ / { compatible = "ti,omap4430", "ti,omap4"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { i2c0 = &i2c1; @@ -56,6 +56,7 @@ #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; + interrupt-parent = <&gic>; }; L2: l2-cache-controller@48242000 { @@ -70,6 +71,15 @@ clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -223,8 +233,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { @@ -319,7 +329,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -327,7 +337,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -335,7 +345,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b54b271e153b..61ad2ea34720 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -412,7 +412,6 @@ palmas: palmas@48 { compatible = "ti,palmas"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index 19212ac6eef0..de8a3d456cf7 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -13,7 +13,7 @@ core_thermal: core_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 2>; diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index 1b87aca88b77..bc3090f2e84b 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -13,7 +13,7 @@ gpu_thermal: gpu_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 1>; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 159720d6c956..74777a6e200a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -311,7 +311,6 @@ palmas: palmas@48 { compatible = "ti,palmas"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; @@ -521,7 +520,6 @@ pinctrl-0 = <&twl6040_pins>; interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ vio-supply = <&smps7_reg>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf42c9f..77b5f70d0ebc 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,7 +18,7 @@ #size-cells = <1>; compatible = "ti,omap5"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { i2c0 = &i2c1; @@ -79,6 +79,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; pmu { @@ -95,6 +96,15 @@ <0x48212000 0x1000>, <0x48214000 0x2000>, <0x48216000 0x2000>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -238,8 +248,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -458,7 +468,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -466,7 +476,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -474,7 +484,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -482,7 +492,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -490,7 +500,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -498,7 +508,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -883,14 +893,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -929,8 +937,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; @@ -1079,4 +1087,8 @@ }; }; +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + /include/ "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 58c27466f012..83b425fb3ac2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -167,10 +167,18 @@ ti,index-starts-at-one; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -294,10 +302,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -599,10 +615,19 @@ }; }; &cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -714,10 +739,18 @@ ti,index-starts-at-one; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d771f687a13b..eccc78d3220b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -411,6 +411,7 @@ "mac_clk_rx", "mac_clk_tx", "clk_mac_ref", "clk_mac_refout", "aclk_mac", "pclk_mac"; + status = "disabled"; }; usb_host0_ehci: usb@ff500000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 261311bdf65b..367af53c1b84 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1248,7 +1248,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1416,7 +1415,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index fe2af9276312..b4544cf11bad 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d986b41b9654..4303874889c6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -66,6 +66,7 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; i2c2 = &i2c2; }; cpus { @@ -259,7 +260,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; @@ -461,8 +462,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { @@ -770,7 +771,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 252c3d1bda50..d9176e606173 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -660,7 +660,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xfff01000 0x1000>; - interrupts = <0 156 4>; + interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; status = "disabled"; @@ -713,6 +713,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 28>, + <&pdma 29>; + dma-names = "tx", "rx"; }; uart1: serial1@ffc03000 { @@ -722,6 +725,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 30>, + <&pdma 31>; + dma-names = "tx", "rx"; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index ea28ebadab1a..eeb7afecbbe6 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -10,7 +10,7 @@ #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -306,7 +306,7 @@ reg = <0xfe380000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; interrupt-names = "hostc"; - phys = <&phy_port0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "sata-phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ab7891c43231..75742f8f96f3 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,6 +56,22 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; + cpus { + cpu0: cpu@0 { + /* + * The A10-Lime is known to be unstable + * when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; + }; + }; + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5c2925831f20..eebb7853e00b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -75,7 +75,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1056000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -83,7 +82,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <4>; + cooling-max-level = <3>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f8818f1edbbe..883cb4873688 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -47,7 +47,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1104000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -57,7 +56,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <6>; + cooling-max-level = <5>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 3a8530b79f1c..fdd181792b4b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -105,7 +105,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1008000 1450000 960000 1400000 912000 1400000 864000 1300000 @@ -116,7 +115,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <7>; + cooling-max-level = <6>; }; cpu@1 { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 4296b5398bf5..f58a3d9d5f13 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -8,7 +8,7 @@ / { compatible = "nvidia,tegra114"; - interrupt-parent = <&gic>; + interrupt-parent = <&lic>; host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; @@ -134,6 +134,19 @@ <0x50046000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; timer@60005000 { @@ -766,5 +779,6 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 4be06c6ea0c8..db85695aa7aa 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -10,7 +10,7 @@ / { compatible = "nvidia,tegra124"; - interrupt-parent = <&gic>; + interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; @@ -173,6 +173,7 @@ <0x0 0x50046000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; }; gpu@0,57000000 { @@ -190,6 +191,18 @@ status = "disabled"; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x0 0x60004000 0x0 0x100>, + <0x0 0x60004100 0x0 0x100>, + <0x0 0x60004200 0x0 0x100>, + <0x0 0x60004300 0x0 0x100>, + <0x0 0x60004400 0x0 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + timer@0,60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; @@ -955,5 +968,6 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e5527f742696..adf6b048d0bb 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -7,7 +7,7 @@ / { compatible = "nvidia,tegra20"; - interrupt-parent = <&intc>; + interrupt-parent = <&lic>; host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; @@ -142,6 +142,7 @@ timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; + interrupt-parent = <&intc>; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -154,6 +155,7 @@ 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&intc>; }; cache-controller@50043000 { @@ -165,6 +167,17 @@ cache-level = <2>; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra20-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index db4810df142c..60e205a0f63d 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -8,7 +8,7 @@ / { compatible = "nvidia,tegra30"; - interrupt-parent = <&intc>; + interrupt-parent = <&lic>; pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; @@ -228,6 +228,7 @@ timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; + interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA30_CLK_TWD>; @@ -239,6 +240,7 @@ 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&intc>; }; cache-controller@50043000 { @@ -250,6 +252,18 @@ cache-level = <2>; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; |