diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts index 0cbe2d2fbbb1..376a33125941 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -29,6 +29,10 @@ height = <1280>; stride = <(720 * 3)>; format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vdd-supply = <&pm8226_l28>; + vddio-supply = <&vddio_disp_vreg>; }; }; @@ -51,6 +55,18 @@ }; }; + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + vin-supply = <&pm8226_l8>; + pinctrl-0 = <&disp_vddio_default>; + pinctrl-names = "default"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -68,12 +84,67 @@ }; }; +&blsp1_i2c2 { + clock-frequency = <100000>; + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { + clock-frequency = <400000>; status = "okay"; + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + sensor@48 { compatible = "ti,tmp108"; reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; }; }; @@ -278,6 +349,56 @@ status = "okay"; }; +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + disp_vddio_default: disp-vddio-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; |