diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-hummingboard.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 101 |
1 files changed, 97 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62841e85a91e..151a3db2aea9 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" @@ -50,6 +88,19 @@ }; }; + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; @@ -59,6 +110,10 @@ }; }; +&audmux { + status = "okay"; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; @@ -75,16 +130,24 @@ &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet status = "okay"; + /* Pro baseboard model */ rtc: pcf8523@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; - */ + + /* Pro baseboard model */ + sgtl5000: sgtl5000@0a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; }; &i2c2 { @@ -129,6 +192,20 @@ >; }; + pinctrl_hummingboard_pwm1: pwm1grp { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; + }; + + pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -168,12 +245,28 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbh1 { disable-over-current; vbus-supply = <®_usbh1_vbus>; |