diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts index 3c8925034a8c..0295f5adcfbc 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts @@ -16,6 +16,32 @@ serial8 = &uart9; /* + * I2C temperature alias port + */ + i2c20 = &i2c4_bus70_chn0; + i2c21 = &i2c4_bus70_chn1; + i2c22 = &i2c4_bus70_chn2; + i2c23 = &i2c4_bus70_chn3; + + /* + * i2c bus 30-31 assigned to OCP slot 0-1 + */ + i2c30 = &ocpslot_0; + i2c31 = &ocpslot_1; + + /* + * i2c bus 32-33 assigned to Riser slot 0-1 + */ + i2c32 = &i2c_riser0; + i2c33 = &i2c_riser1; + + /* + * i2c bus 38-39 assigned to FRU on Riser slot 0-1 + */ + i2c38 = &i2c_riser0_chn_0; + i2c39 = &i2c_riser1_chn_0; + + /* * I2C NVMe alias port */ i2c100 = &backplane_0; @@ -87,6 +113,37 @@ }; }; + leds { + compatible = "gpio-leds"; + /* + * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when + * watchdog timeout. + */ + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + + led-fan-fault { + gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>; + }; + + led-psu-fault { + gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>; + }; + }; + voltage_mon_reg: voltage-mon-regulator { compatible = "regulator-fixed"; regulator-name = "ltc2497_reg"; @@ -515,6 +572,80 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + + ocpslot_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_0_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + ocpslot_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + ocpslot_1_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + i2c_riser0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser0_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; + + i2c_riser1: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser1_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; }; }; @@ -790,6 +921,10 @@ }; }; +&i2c10 { + status = "okay"; +}; + &i2c11 { status = "okay"; ssif-bmc@10 { @@ -812,6 +947,25 @@ }; }; +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "fan-fault","psu-fault", + "","", + "","", + "","", + "","", + "","", + "","", + "",""; + }; +}; + &adc0 { status = "okay"; |