diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 169 |
1 files changed, 162 insertions, 7 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..f9295a4e1036 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -93,6 +93,27 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_ASM9260_UART + bool "Kernel low-level debugging via asm9260 UART" + depends on MACH_ASM9260 + help + Say Y here if you want the debug print routines to direct + their output to an UART or USART port on asm9260 based + machines. + + DEBUG_UART_PHYS | DEBUG_UART_VIRT + + 0x80000000 | 0xf0000000 | UART0 + 0x80004000 | 0xf0004000 | UART1 + 0x80008000 | 0xf0008000 | UART2 + 0x8000c000 | 0xf000c000 | UART3 + 0x80010000 | 0xf0010000 | UART4 + 0x80014000 | 0xf0014000 | UART5 + 0x80018000 | 0xf0018000 | UART6 + 0x8001c000 | 0xf001c000 | UART7 + 0x80020000 | 0xf0020000 | UART8 + 0x80024000 | 0xf0024000 | UART9 + config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 @@ -113,7 +134,7 @@ choice config DEBUG_BCM_5301X bool "Kernel low-level debugging on BCM5301X UART1" depends on ARCH_BCM_5301X - select DEBUG_UART_PL01X + select DEBUG_UART_8250 config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" @@ -139,6 +160,17 @@ choice Say Y here if you want kernel low-level debugging support on Marvell Berlin SoC based platforms. + config DEBUG_BRCMSTB_UART + bool "Use BRCMSTB UART for low-level debug" + depends on ARCH_BRCMSTB + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + If you have a Broadcom STB chip and would like early print + messages to appear over the UART, select this option. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -653,6 +685,64 @@ choice Say Y here if you want kernel low-level debugging support on Rockchip RK32xx based platforms. + config DEBUG_R7S72100_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R7S72100" + depends on ARCH_R7S72100 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas RZ/A1H (R7S72100). + + config DEBUG_RCAR_GEN1_SCIF0 + bool "Kernel low-level debugging messages via SCIF0 on R8A7778" + depends on ARCH_R8A7778 + help + Say Y here if you want kernel low-level debugging support + via SCIF0 on Renesas R-Car M1A (R8A7778). + + config DEBUG_RCAR_GEN1_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R8A7779" + depends on ARCH_R8A7779 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas R-Car H1 (R8A7779). + + config DEBUG_RCAR_GEN2_SCIF0 + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 + help + Say Y here if you want kernel low-level debugging support + via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or + M2-N (R8A7793). + + config DEBUG_RCAR_GEN2_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R8A7794" + depends on ARCH_R8A7794 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas R-Car E2 (R8A7794). + + config DEBUG_RMOBILE_SCIFA0 + bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372" + depends on ARCH_R8A73A4 || ARCH_SH7372 + help + Say Y here if you want kernel low-level debugging support + via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile + AP4 (SH7372). + + config DEBUG_RMOBILE_SCIFA1 + bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" + depends on ARCH_R8A7740 + help + Say Y here if you want kernel low-level debugging support + via SCIFA1 on Renesas R-Mobile A1 (R8A7740). + + config DEBUG_RMOBILE_SCIFA4 + bool "Kernel low-level debugging messages via SCIFA4 on SH73A0" + depends on ARCH_SH73A0 + help + Say Y here if you want kernel low-level debugging support + via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). + config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS @@ -723,6 +813,14 @@ choice their output to UART 2. The port must have been initialised by the boot-loader before use. + config DEBUG_SA1100 + depends on ARCH_SA1100 + bool "Use SA1100 UARTs for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on SA-11x0 UART ports. The kernel will check for the first + enabled UART in a sequence 3-1-2. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -731,6 +829,14 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUN9I_UART0 + bool "Kernel low-level debugging messages via sun9i UART0" + depends on MACH_SUN9I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A80 based platforms on the UART0. + config DEBUG_SUNXI_UART0 bool "Kernel low-level debugging messages via sunXi UART0" depends on ARCH_SUNXI @@ -866,6 +972,22 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt6589 based platforms on UART0. + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1041,7 +1163,9 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string + default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X @@ -1061,6 +1185,14 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SX_UART default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 @@ -1106,6 +1238,7 @@ config DEBUG_UART_PHYS default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC + default 0x07000000 if DEBUG_SUN9I_UART0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1113,7 +1246,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 + default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1135,6 +1270,7 @@ config DEBUG_UART_PHYS default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if FOOTBRIDGE default 0x78000000 if DEBUG_CNS3XXX + default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART @@ -1152,7 +1288,14 @@ config DEBUG_UART_PHYS default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if ARCH_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART + default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 + default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 + default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 + default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 + default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 + default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 + default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X @@ -1164,32 +1307,42 @@ config DEBUG_UART_PHYS default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX + default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 + default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ + DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ + DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ + DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ + DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 + default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 + default 0xf1009000 if DEBUG_MT8135_UART3 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1f02800 if DEBUG_SUNXI_R_UART - default 0xf2100000 if DEBUG_PXA_UART1 + default 0xf6200000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ @@ -1204,6 +1357,7 @@ config DEBUG_UART_VIRT default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1244,12 +1398,12 @@ config DEBUG_UART_VIRT depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X + default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X default 2 config DEBUG_UART_8250_WORD @@ -1260,7 +1414,8 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ + DEBUG_BRCMSTB_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" |