diff options
Diffstat (limited to 'Documentation')
898 files changed, 21400 insertions, 4050 deletions
diff --git a/Documentation/ABI/obsolete/o2cb b/Documentation/ABI/obsolete/o2cb index fe7e45e17bc7..8f39b596731d 100644 --- a/Documentation/ABI/obsolete/o2cb +++ b/Documentation/ABI/obsolete/o2cb @@ -1,11 +1,11 @@ What: /sys/o2cb Date: Dec 2005 KernelVersion: 2.6.16 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: Ocfs2-tools looks at 'interface-revision' for versioning information. Each logmask/ file controls a set of debug prints and can be written into with the strings "allow", "deny", or "off". Reading the file returns the current state. Was renamed to /sys/fs/u2cb/ Users: ocfs2-tools. It's sufficient to mail proposed changes to - ocfs2-devel@oss.oracle.com. + ocfs2-devel@lists.linux.dev. diff --git a/Documentation/ABI/removed/o2cb b/Documentation/ABI/removed/o2cb index 20c91adca6d4..61cff238fbe8 100644 --- a/Documentation/ABI/removed/o2cb +++ b/Documentation/ABI/removed/o2cb @@ -1,10 +1,10 @@ What: /sys/o2cb symlink Date: May 2011 KernelVersion: 3.0 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is removed when new versions of ocfs2-tools which know to look in /sys/fs/o2cb are sufficiently prevalent. Don't code new software to look here, it should try /sys/fs/o2cb instead. Users: ocfs2-tools. It's sufficient to mail proposed changes to - ocfs2-devel@oss.oracle.com. + ocfs2-devel@lists.linux.dev. diff --git a/Documentation/ABI/stable/o2cb b/Documentation/ABI/stable/o2cb index b62a967f01a0..3a83b5c54e93 100644 --- a/Documentation/ABI/stable/o2cb +++ b/Documentation/ABI/stable/o2cb @@ -1,10 +1,10 @@ What: /sys/fs/o2cb/ Date: Dec 2005 KernelVersion: 2.6.16 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: Ocfs2-tools looks at 'interface-revision' for versioning information. Each logmask/ file controls a set of debug prints and can be written into with the strings "allow", "deny", or "off". Reading the file returns the current state. Users: ocfs2-tools. It's sufficient to mail proposed changes to - ocfs2-devel@oss.oracle.com. + ocfs2-devel@lists.linux.dev. diff --git a/Documentation/ABI/stable/sysfs-platform-wmi-bmof b/Documentation/ABI/stable/sysfs-platform-wmi-bmof new file mode 100644 index 000000000000..a786504b6027 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-platform-wmi-bmof @@ -0,0 +1,7 @@ +What: /sys/bus/wmi/devices/05901221-D566-11D1-B2F0-00A0C9062910[-X]/bmof +Date: Jun 2017 +KernelVersion: 4.13 +Description: + Binary MOF metadata used to decribe the details of available ACPI WMI interfaces. + + See Documentation/wmi/devices/wmi-bmof.rst for details. diff --git a/Documentation/ABI/testing/debugfs-dell-wmi-ddv b/Documentation/ABI/testing/debugfs-dell-wmi-ddv index fbcc5d6f7388..81cfc788be15 100644 --- a/Documentation/ABI/testing/debugfs-dell-wmi-ddv +++ b/Documentation/ABI/testing/debugfs-dell-wmi-ddv @@ -3,19 +3,32 @@ Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - This file contains the contents of the fan sensor information buffer, - which contains fan sensor entries and a terminating character (0xFF). + This file contains the contents of the fan sensor information + buffer, which contains fan sensor entries and a terminating + character (0xFF). - Each fan sensor entry consists of three bytes with an unknown meaning, - interested people may use this file for reverse-engineering. + Each fan sensor entry contains: + + - fan type (single byte) + - fan speed in RPM (two bytes, little endian) + + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. What: /sys/kernel/debug/dell-wmi-ddv-<wmi_device_name>/thermal_sensor_information Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - This file contains the contents of the thermal sensor information buffer, - which contains thermal sensor entries and a terminating character (0xFF). + This file contains the contents of the thermal sensor information + buffer, which contains thermal sensor entries and a terminating + character (0xFF). + + Each thermal sensor entry contains: + + - thermal type (single byte) + - current temperature (single byte) + - min. temperature (single byte) + - max. temperature (single byte) + - unknown field (single byte) - Each thermal sensor entry consists of five bytes with an unknown meaning, - interested people may use this file for reverse-engineering. + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter index 1417c4272c6c..dc3b3a5c876b 100644 --- a/Documentation/ABI/testing/sysfs-bus-counter +++ b/Documentation/ABI/testing/sysfs-bus-counter @@ -90,6 +90,60 @@ Description: counter does not freeze at the boundary points, but counts continuously throughout. + interrupt on terminal count: + The output signal is initially low, and will remain low + until the counter reaches zero. The output signal then + goes high and remains high until a new preset value is + set. + + hardware retriggerable one-shot: + The output signal is initially high. The output signal + will go low by a trigger input signal, and will remain + low until the counter reaches zero. The output will then + go high and remain high until the next trigger. A + trigger results in loading the counter to the preset + value and setting the output signal low, thus starting + the one-shot pulse. + + rate generator: + The output signal is initially high. When the counter + has decremented to 1, the output signal goes low for one + clock pulse. The output signal then goes high again, the + counter is reloaded to the preset value, and the process + repeats in a periodic manner as such. + + square wave mode: + The output signal is initially high. + + If the initial count is even, the counter is decremented + by two on succeeding clock pulses. When the count + expires, the output signal changes value and the + counter is reloaded to the preset value. The process + repeats in periodic manner as such. + + If the initial count is odd, the initial count minus one + (an even number) is loaded and then is decremented by + two on succeeding clock pulses. One clock pulse after + the count expires, the output signal goes low and the + counter is reloaded to the preset value minus one. + Succeeding clock pulses decrement the count by two. When + the count expires, the output goes high again and the + counter is reloaded to the preset value minus one. The + process repeats in a periodic manner as such. + + software triggered strobe: + The output signal is initially high. When the count + expires, the output will go low for one clock pulse and + then go high again. The counting sequence is "triggered" + by setting the preset value. + + hardware triggered strobe: + The output signal is initially high. Counting is started + by a trigger input signal. When the count expires, the + output signal will go low for one clock pulse and then + go high again. A trigger results in loading the counter + to the preset value. + What: /sys/bus/counter/devices/counterX/countY/count_mode_available What: /sys/bus/counter/devices/counterX/countY/error_noise_available What: /sys/bus/counter/devices/counterX/countY/function_available diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 48ac0d911801..6350dd82b9a9 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -58,6 +58,54 @@ Description: affinity for this device. +What: /sys/bus/cxl/devices/memX/security/state +Date: June, 2023 +KernelVersion: v6.5 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) Reading this file will display the CXL security state for + that device. Such states can be: 'disabled', 'sanitize', when + a sanitization is currently underway; or those available only + for persistent memory: 'locked', 'unlocked' or 'frozen'. This + sysfs entry is select/poll capable from userspace to notify + upon completion of a sanitize operation. + + +What: /sys/bus/cxl/devices/memX/security/sanitize +Date: June, 2023 +KernelVersion: v6.5 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Write a boolean 'true' string value to this attribute to + sanitize the device to securely re-purpose or decommission it. + This is done by ensuring that all user data and meta-data, + whether it resides in persistent capacity, volatile capacity, + or the LSA, is made permanently unavailable by whatever means + is appropriate for the media type. This functionality requires + the device to be not be actively decoding any HPA ranges. + + +What /sys/bus/cxl/devices/memX/security/erase +Date: June, 2023 +KernelVersion: v6.5 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Write a boolean 'true' string value to this attribute to + secure erase user data by changing the media encryption keys for + all user data areas of the device. + + +What: /sys/bus/cxl/devices/memX/firmware/ +Date: April, 2023 +KernelVersion: v6.5 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Firmware uploader mechanism. The different files under + this directory can be used to upload and activate new + firmware for CXL devices. The interfaces under this are + documented in sysfs-class-firmware. + + What: /sys/bus/cxl/devices/*/devtype Date: June, 2021 KernelVersion: v5.14 diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index cb172db41b34..be663258b9b7 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -292,6 +292,16 @@ Description: which is marked with early_stop has failed to initialize, it will ignore all future connections until this attribute is clear. +What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/state +Date: June 2023 +Contact: Roy Luo <royluo@google.com> +Description: + Indicates current state of the USB device attached to the port. + Valid states are: 'not-attached', 'attached', 'powered', + 'reconnecting', 'unauthenticated', 'default', 'addressed', + 'configured', and 'suspended'. This file supports poll() to + monitor the state change from user space. + What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout Date: May 2013 Contact: Mathias Nyman <mathias.nyman@linux.intel.com> diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 4cdba3477176..1b3ecae80b3d 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -243,8 +243,8 @@ Description: index: Used with HDD and NVME authentication to set the drive index - that is being referenced (e.g hdd0, hdd1 etc) - This attribute defaults to device 0. + that is being referenced (e.g hdd1, hdd2 etc) + This attribute defaults to device 1. certificate, signature, save_signature: These attributes are used for certificate based authentication. This is diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx b/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx new file mode 100644 index 000000000000..6d4449cf9d71 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx @@ -0,0 +1,5 @@ +What: /sys/class/leds/<led>/dim +Date: May 2023 +Description: 64-level DIM current. If you write a negative value or + "auto", the dim will be calculated according to the + brightness. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 646540950e38..78b62a23b14a 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -13,6 +13,11 @@ Description: Specifies the duration of the LED blink in milliseconds. Defaults to 50 ms. + With hw_control ON, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + What: /sys/class/leds/<led>/link Date: Dec 2017 KernelVersion: 4.16 @@ -39,6 +44,9 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + What: /sys/class/leds/<led>/rx Date: Dec 2017 KernelVersion: 4.16 @@ -50,3 +58,84 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. + + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/hw_control +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are driven by hardware + or software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED is using hardware control to blink and signal the + requested modes. + +What: /sys/class/leds/<led>/link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi index 47e6b9732337..b028f5bc86db 100644 --- a/Documentation/ABI/testing/sysfs-class-net-qmi +++ b/Documentation/ABI/testing/sysfs-class-net-qmi @@ -62,7 +62,7 @@ Description: What: /sys/class/net/<iface>/qmi/pass_through Date: January 2021 KernelVersion: 5.12 -Contact: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> +Contact: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Description: Boolean. Default: 'N' diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt index 82de6d710266..d7e206b4901c 100644 --- a/Documentation/ABI/testing/sysfs-devices-hisi_ptt +++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt @@ -59,3 +59,55 @@ Description: (RW) Control the allocated buffer watermark of outbound packets. The available tune data is [0, 1, 2]. Writing a negative value will return an error, and out of range values will be converted to 2. The value indicates a probable level of the event. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: This directory contains the files providing the PCIe Root Port filters + information used for PTT trace. Each file is named after the supported + Root Port device name <domain>:<bus>:<device>.<function>. + + See the description of the "filter" in Documentation/trace/hisi-ptt.rst + for more information. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters/multiselect +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (Read) Indicates if this kind of filter can be selected at the same + time as others filters, or must be used on it's own. 1 indicates + the former case and 0 indicates the latter. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters/<bdf> +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (Read) Indicates the filter value of this Root Port filter, which + can be used to control the TLP headers to trace by the PTT trace. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: This directory contains the files providing the PCIe Requester filters + information used for PTT trace. Each file is named after the supported + Endpoint device name <domain>:<bus>:<device>.<function>. + + See the description of the "filter" in Documentation/trace/hisi-ptt.rst + for more information. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters/multiselect +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (Read) Indicates if this kind of filter can be selected at the same + time as others filters, or must be used on it's own. 1 indicates + the former case and 0 indicates the latter. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters/<bdf> +Date: May 2023 +KernelVersion: 6.5 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (Read) Indicates the filter value of this Requester filter, which + can be used to control the TLP headers to trace by the PTT trace. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index f54867cadb0f..ecd585ca2d50 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -670,7 +670,7 @@ Description: Preferred MTE tag checking mode "async" Prefer asynchronous mode ================ ============================================== - See also: Documentation/arm64/memory-tagging-extension.rst + See also: Documentation/arch/arm64/memory-tagging-extension.rst What: /sys/devices/system/cpu/nohz_full Date: Apr 2015 diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud index 83f3872182a4..2bab0db2d2f0 100644 --- a/Documentation/ABI/testing/sysfs-driver-eud +++ b/Documentation/ABI/testing/sysfs-driver-eud @@ -1,4 +1,4 @@ -What: /sys/bus/platform/drivers/eud/.../enable +What: /sys/bus/platform/drivers/qcom_eud/.../enable Date: February 2022 Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> Description: diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index 087842b1969e..ef6d6c57105e 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -27,7 +27,18 @@ Description: (RW) Reports the current configuration of the QAT device. * sym;asym: the device is configured for running crypto services + * asym;sym: identical to sym;asym * dc: the device is configured for running compression services + * sym: the device is configured for running symmetric crypto + services + * asym: the device is configured for running asymmetric crypto + services + * asym;dc: the device is configured for running asymmetric + crypto services and compression services + * dc;asym: identical to asym;dc + * sym;dc: the device is configured for running symmetric crypto + services and compression services + * dc;sym: identical to sym;dc It is possible to set the configuration only if the device is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state) @@ -47,3 +58,38 @@ Description: (RW) Reports the current configuration of the QAT device. dc This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled +Date: June 2023 +KernelVersion: 6.5 +Contact: qat-linux@intel.com +Description: (RW) This configuration option provides a way to force the device into remaining in + the MAX power state. + If idle support is enabled the device will transition to the `MIN` power state when + idle, otherwise will stay in the MAX power state. + Write to the file to enable or disable idle support. + + The values are: + + * 0: idle support is disabled + * 1: idle support is enabled + + Default value is 1. + + It is possible to set the pm_idle_enabled value only if the device + is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state) + + The following example shows how to change the pm_idle_enabled of + a device:: + + # cat /sys/bus/pci/devices/<BDF>/qat/state + up + # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + 1 + # echo down > /sys/bus/pci/devices/<BDF>/qat/state + # echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + # echo up > /sys/bus/pci/devices/<BDF>/qat/state + # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + 0 + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-ocfs2 b/Documentation/ABI/testing/sysfs-ocfs2 index b7cc516a8a8a..494d7c1ac710 100644 --- a/Documentation/ABI/testing/sysfs-ocfs2 +++ b/Documentation/ABI/testing/sysfs-ocfs2 @@ -1,13 +1,13 @@ What: /sys/fs/ocfs2/ Date: April 2008 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: The /sys/fs/ocfs2 directory contains knobs used by the ocfs2-tools to interact with the filesystem. What: /sys/fs/ocfs2/max_locking_protocol Date: April 2008 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: The /sys/fs/ocfs2/max_locking_protocol file displays version of ocfs2 locking supported by the filesystem. This version @@ -28,7 +28,7 @@ Description: What: /sys/fs/ocfs2/loaded_cluster_plugins Date: April 2008 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: The /sys/fs/ocfs2/loaded_cluster_plugins file describes the available plugins to support ocfs2 cluster operation. @@ -48,7 +48,7 @@ Description: What: /sys/fs/ocfs2/active_cluster_plugin Date: April 2008 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: The /sys/fs/ocfs2/active_cluster_plugin displays which cluster plugin is currently in use by the filesystem. @@ -65,7 +65,7 @@ Description: What: /sys/fs/ocfs2/cluster_stack Date: April 2008 -Contact: ocfs2-devel@oss.oracle.com +Contact: ocfs2-devel@lists.linux.dev Description: The /sys/fs/ocfs2/cluster_stack file contains the name of current ocfs2 cluster stack. This value is set by @@ -86,4 +86,4 @@ Description: stack return an error. Users: - ocfs2-tools <ocfs2-tools-devel@oss.oracle.com> + ocfs2-tools <ocfs2-tools-devel@lists.linux.dev> diff --git a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv index 1d97ad615c66..a9d39d9e8865 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv +++ b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv @@ -3,5 +3,7 @@ Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - Reports the Dell ePPID (electronic Dell Piece Part Identification) + Reports the Dell ePPID (electronic Piece Part Identification) of the ACPI battery. + + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index 9b99a81babb1..4c5c02d8f870 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -75,3 +75,12 @@ KernelVersion: 6.4 Contact: "Liming Sun <limings@nvidia.com>" Description: The file used to access the BlueField boot fifo. + +What: /sys/bus/platform/devices/MLNXBF04:00/rsh_log +Date: May 2023 +KernelVersion: 6.4 +Contact: "Liming Sun <limings@nvidia.com>" +Description: + The file used to write BlueField boot log with the format + "[INFO|WARN|ERR|ASSERT ]<msg>". Log level 'INFO' is used by + default if not specified. diff --git a/Documentation/PCI/endpoint/pci-ntb-howto.rst b/Documentation/PCI/endpoint/pci-ntb-howto.rst index 1884bf29caba..4261e7157ef1 100644 --- a/Documentation/PCI/endpoint/pci-ntb-howto.rst +++ b/Documentation/PCI/endpoint/pci-ntb-howto.rst @@ -88,13 +88,10 @@ commands can be used:: # echo 0x104c > functions/pci_epf_ntb/func1/vendorid # echo 0xb00d > functions/pci_epf_ntb/func1/deviceid -In order to configure NTB specific attributes, a new sub-directory to func1 -should be created:: - - # mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/ - -The NTB function driver will populate this directory with various attributes -that can be configured by the user:: +The PCI endpoint framework also automatically creates a sub-directory in the +function attribute directory. This sub-directory has the same name as the name +of the function device and is populated with the following NTB specific +attributes that can be configured by the user:: # ls functions/pci_epf_ntb/func1/pci_epf_ntb.0/ db_count mw1 mw2 mw3 mw4 num_mws diff --git a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst index 4ab8e4a26d4b..70d3bc90893f 100644 --- a/Documentation/PCI/endpoint/pci-vntb-howto.rst +++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst @@ -84,13 +84,10 @@ commands can be used:: # echo 0x1957 > functions/pci_epf_vntb/func1/vendorid # echo 0x0809 > functions/pci_epf_vntb/func1/deviceid -In order to configure NTB specific attributes, a new sub-directory to func1 -should be created:: - - # mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/ - -The NTB function driver will populate this directory with various attributes -that can be configured by the user:: +The PCI endpoint framework also automatically creates a sub-directory in the +function attribute directory. This sub-directory has the same name as the name +of the function device and is populated with the following NTB specific +attributes that can be configured by the user:: # ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/ db_count mw1 mw2 mw3 mw4 num_mws @@ -103,7 +100,7 @@ A sample configuration for NTB function is given below:: # echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws # echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1 -A sample configuration for virtual NTB driver for virutal PCI bus:: +A sample configuration for virtual NTB driver for virtual PCI bus:: # echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid # echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst index 8ae461e97c54..c9400f02333b 100644 --- a/Documentation/PCI/msi-howto.rst +++ b/Documentation/PCI/msi-howto.rst @@ -290,7 +290,7 @@ PCI_IRQ_MSI or PCI_IRQ_MSIX flags. List of device drivers MSI(-X) APIs =================================== -The PCI/MSI subystem has a dedicated C file for its exported device driver +The PCI/MSI subsystem has a dedicated C file for its exported device driver APIs — `drivers/pci/msi/api.c`. The following functions are exported: .. kernel-doc:: drivers/pci/msi/api.c diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst index 9981d330da8f..c237596f67e3 100644 --- a/Documentation/PCI/pci-error-recovery.rst +++ b/Documentation/PCI/pci-error-recovery.rst @@ -364,7 +364,7 @@ Note, however, not all failures are truly "permanent". Some are caused by over-heating, some by a poorly seated card. Many PCI error events are caused by software bugs, e.g. DMA's to wild addresses or bogus split transactions due to programming -errors. See the discussion in powerpc/eeh-pci-error-recovery.txt +errors. See the discussion in Documentation/powerpc/eeh-pci-error-recovery.rst for additional detail on real-life experience of the causes of software errors. diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst index 0b36b9ebfa4b..e00d63971695 100644 --- a/Documentation/PCI/pcieaer-howto.rst +++ b/Documentation/PCI/pcieaer-howto.rst @@ -16,62 +16,61 @@ Overview About this guide ---------------- -This guide describes the basics of the PCI Express Advanced Error +This guide describes the basics of the PCI Express (PCIe) Advanced Error Reporting (AER) driver and provides information on how to use it, as -well as how to enable the drivers of endpoint devices to conform with -PCI Express AER driver. +well as how to enable the drivers of Endpoint devices to conform with +the PCIe AER driver. -What is the PCI Express AER Driver? ------------------------------------ +What is the PCIe AER Driver? +---------------------------- -PCI Express error signaling can occur on the PCI Express link itself -or on behalf of transactions initiated on the link. PCI Express +PCIe error signaling can occur on the PCIe link itself +or on behalf of transactions initiated on the link. PCIe defines two error reporting paradigms: the baseline capability and the Advanced Error Reporting capability. The baseline capability is -required of all PCI Express components providing a minimum defined +required of all PCIe components providing a minimum defined set of error reporting requirements. Advanced Error Reporting -capability is implemented with a PCI Express advanced error reporting +capability is implemented with a PCIe Advanced Error Reporting extended capability structure providing more robust error reporting. -The PCI Express AER driver provides the infrastructure to support PCI -Express Advanced Error Reporting capability. The PCI Express AER -driver provides three basic functions: +The PCIe AER driver provides the infrastructure to support PCIe Advanced +Error Reporting capability. The PCIe AER driver provides three basic +functions: - Gathers the comprehensive error information if errors occurred. - Reports error to the users. - Performs error recovery actions. -AER driver only attaches root ports which support PCI-Express AER -capability. +The AER driver only attaches to Root Ports and RCECs that support the PCIe +AER capability. User Guide ========== -Include the PCI Express AER Root Driver into the Linux Kernel -------------------------------------------------------------- +Include the PCIe AER Root Driver into the Linux Kernel +------------------------------------------------------ -The PCI Express AER Root driver is a Root Port service driver attached -to the PCI Express Port Bus driver. If a user wants to use it, the driver -has to be compiled. Option CONFIG_PCIEAER supports this capability. It -depends on CONFIG_PCIEPORTBUS, so pls. set CONFIG_PCIEPORTBUS=y and -CONFIG_PCIEAER = y. +The PCIe AER driver is a Root Port service driver attached +via the PCIe Port Bus driver. If a user wants to use it, the driver +must be compiled. It is enabled with CONFIG_PCIEAER, which +depends on CONFIG_PCIEPORTBUS. -Load PCI Express AER Root Driver --------------------------------- +Load PCIe AER Root Driver +------------------------- Some systems have AER support in firmware. Enabling Linux AER support at -the same time the firmware handles AER may result in unpredictable +the same time the firmware handles AER would result in unpredictable behavior. Therefore, Linux does not handle AER events unless the firmware -grants AER control to the OS via the ACPI _OSC method. See the PCI FW 3.0 +grants AER control to the OS via the ACPI _OSC method. See the PCI Firmware Specification for details regarding _OSC usage. AER error output ---------------- When a PCIe AER error is captured, an error message will be output to -console. If it's a correctable error, it is output as a warning. +console. If it's a correctable error, it is output as an info message. Otherwise, it is printed as an error. So users could choose different log level to filter out correctable error messages. @@ -82,9 +81,9 @@ Below shows an example:: 0000:50:00.0: [20] Unsupported Request (First) 0000:50:00.0: TLP Header: 04000001 00200a03 05010000 00050100 -In the example, 'Requester ID' means the ID of the device who sends -the error message to root port. Pls. refer to pci express specs for -other fields. +In the example, 'Requester ID' means the ID of the device that sent +the error message to the Root Port. Please refer to PCIe specs for other +fields. AER Statistics / Counters ------------------------- @@ -96,65 +95,56 @@ Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats Developer Guide =============== -To enable AER aware support requires a software driver to configure -the AER capability structure within its device and to provide callbacks. +To enable error recovery, a software driver must provide callbacks. -To support AER better, developers need understand how AER does work -firstly. +To support AER better, developers need to understand how AER works. -PCI Express errors are classified into two types: correctable errors -and uncorrectable errors. This classification is based on the impacts +PCIe errors are classified into two types: correctable errors +and uncorrectable errors. This classification is based on the impact of those errors, which may result in degraded performance or function failure. Correctable errors pose no impacts on the functionality of the -interface. The PCI Express protocol can recover without any software +interface. The PCIe protocol can recover without any software intervention or any loss of data. These errors are detected and -corrected by hardware. Unlike correctable errors, uncorrectable +corrected by hardware. + +Unlike correctable errors, uncorrectable errors impact functionality of the interface. Uncorrectable errors -can cause a particular transaction or a particular PCI Express link +can cause a particular transaction or a particular PCIe link to be unreliable. Depending on those error conditions, uncorrectable errors are further classified into non-fatal errors and fatal errors. Non-fatal errors cause the particular transaction to be unreliable, -but the PCI Express link itself is fully functional. Fatal errors, on +but the PCIe link itself is fully functional. Fatal errors, on the other hand, cause the link to be unreliable. -When AER is enabled, a PCI Express device will automatically send an -error message to the PCIe root port above it when the device captures +When PCIe error reporting is enabled, a device will automatically send an +error message to the Root Port above it when it captures an error. The Root Port, upon receiving an error reporting message, -internally processes and logs the error message in its PCI Express -capability structure. Error information being logged includes storing +internally processes and logs the error message in its AER +Capability structure. Error information being logged includes storing the error reporting agent's requestor ID into the Error Source Identification Registers and setting the error bits of the Root Error -Status Register accordingly. If AER error reporting is enabled in Root -Error Command Register, the Root Port generates an interrupt if an +Status Register accordingly. If AER error reporting is enabled in the Root +Error Command Register, the Root Port generates an interrupt when an error is detected. -Note that the errors as described above are related to the PCI Express +Note that the errors as described above are related to the PCIe hierarchy and links. These errors do not include any device specific errors because device specific errors will still get sent directly to the device driver. -Configure the AER capability structure --------------------------------------- - -AER aware drivers of PCI Express component need change the device -control registers to enable AER. They also could change AER registers, -including mask and severity registers. Helper function -pci_enable_pcie_error_reporting could be used to enable AER. See -section 3.3. - Provide callbacks ----------------- -callback reset_link to reset pci express link -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +callback reset_link to reset PCIe link +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -This callback is used to reset the pci express physical link when a -fatal error happens. The root port aer service driver provides a -default reset_link function, but different upstream ports might -have different specifications to reset pci express link, so all -upstream ports should provide their own reset_link functions. +This callback is used to reset the PCIe physical link when a +fatal error happens. The Root Port AER service driver provides a +default reset_link function, but different Upstream Ports might +have different specifications to reset the PCIe link, so +Upstream Port drivers may provide their own reset_link functions. Section 3.2.2.2 provides more detailed info on when to call reset_link. @@ -162,24 +152,24 @@ reset_link. PCI error-recovery callbacks ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The PCI Express AER Root driver uses error callbacks to coordinate +The PCIe AER Root driver uses error callbacks to coordinate with downstream device drivers associated with a hierarchy in question when performing error recovery actions. Data struct pci_driver has a pointer, err_handler, to point to pci_error_handlers who consists of a couple of callback function -pointers. AER driver follows the rules defined in -pci-error-recovery.txt except pci express specific parts (e.g. -reset_link). Pls. refer to pci-error-recovery.txt for detailed +pointers. The AER driver follows the rules defined in +pci-error-recovery.rst except PCIe-specific parts (e.g. +reset_link). Please refer to pci-error-recovery.rst for detailed definitions of the callbacks. -Below sections specify when to call the error callback functions. +The sections below specify when to call the error callback functions. Correctable errors ~~~~~~~~~~~~~~~~~~ Correctable errors pose no impacts on the functionality of -the interface. The PCI Express protocol can recover without any +the interface. The PCIe protocol can recover without any software intervention or any loss of data. These errors do not require any recovery actions. The AER driver clears the device's correctable error status register accordingly and logs these errors. @@ -190,12 +180,12 @@ Non-correctable (non-fatal and fatal) errors If an error message indicates a non-fatal error, performing link reset at upstream is not required. The AER driver calls error_detected(dev, pci_channel_io_normal) to all drivers associated within a hierarchy in -question. for example:: +question. For example:: - EndPoint<==>DownstreamPort B<==>UpstreamPort A<==>RootPort + Endpoint <==> Downstream Port B <==> Upstream Port A <==> Root Port -If Upstream port A captures an AER error, the hierarchy consists of -Downstream port B and EndPoint. +If Upstream Port A captures an AER error, the hierarchy consists of +Downstream Port B and Endpoint. A driver may return PCI_ERS_RESULT_CAN_RECOVER, PCI_ERS_RESULT_DISCONNECT, or PCI_ERS_RESULT_NEED_RESET, depending on @@ -212,36 +202,11 @@ to reset the link. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER and reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes to mmio_enabled. -helper functions ----------------- -:: - - int pci_enable_pcie_error_reporting(struct pci_dev *dev); - -pci_enable_pcie_error_reporting enables the device to send error -messages to root port when an error is detected. Note that devices -don't enable the error reporting by default, so device drivers need -call this function to enable it. - -:: - - int pci_disable_pcie_error_reporting(struct pci_dev *dev); - -pci_disable_pcie_error_reporting disables the device to send error -messages to root port when an error is detected. - -:: - - int pci_aer_clear_nonfatal_status(struct pci_dev *dev);` - -pci_aer_clear_nonfatal_status clears non-fatal errors in the uncorrectable -error status register. - Frequent Asked Questions ------------------------ Q: - What happens if a PCI Express device driver does not provide an + What happens if a PCIe device driver does not provide an error recovery handler (pci_driver->err_handler is equal to NULL)? A: @@ -257,24 +222,6 @@ A: Fatal error recovery will fail if the errors are reported by the upstream ports who are attached by the service driver. -Q: - How does this infrastructure deal with driver that is not PCI - Express aware? - -A: - This infrastructure calls the error callback functions of the - driver when an error happens. But if the driver is not aware of - PCI Express, the device might not report its own errors to root - port. - -Q: - What modifications will that driver need to make it compatible - with the PCI Express AER Root driver? - -A: - It could call the helper functions to enable AER in devices and - cleanup uncorrectable status register. Pls. refer to section 3.3. - Software error injection ======================== @@ -296,5 +243,5 @@ from: https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/ -More information about aer-inject can be found in the document comes -with its source code. +More information about aer-inject can be found in the document in +its source code. diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst index 49387d823619..f3b605285a87 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.rst +++ b/Documentation/RCU/Design/Requirements/Requirements.rst @@ -2071,41 +2071,7 @@ call. Because RCU avoids interrupting idle CPUs, it is illegal to execute an RCU read-side critical section on an idle CPU. (Kernels built with -``CONFIG_PROVE_RCU=y`` will splat if you try it.) The RCU_NONIDLE() -macro and ``_rcuidle`` event tracing is provided to work around this -restriction. In addition, rcu_is_watching() may be used to test -whether or not it is currently legal to run RCU read-side critical -sections on this CPU. I learned of the need for diagnostics on the one -hand and RCU_NONIDLE() on the other while inspecting idle-loop code. -Steven Rostedt supplied ``_rcuidle`` event tracing, which is used quite -heavily in the idle loop. However, there are some restrictions on the -code placed within RCU_NONIDLE(): - -#. Blocking is prohibited. In practice, this is not a serious - restriction given that idle tasks are prohibited from blocking to - begin with. -#. Although nesting RCU_NONIDLE() is permitted, they cannot nest - indefinitely deeply. However, given that they can be nested on the - order of a million deep, even on 32-bit systems, this should not be a - serious restriction. This nesting limit would probably be reached - long after the compiler OOMed or the stack overflowed. -#. Any code path that enters RCU_NONIDLE() must sequence out of that - same RCU_NONIDLE(). For example, the following is grossly - illegal: - - :: - - 1 RCU_NONIDLE({ - 2 do_something(); - 3 goto bad_idea; /* BUG!!! */ - 4 do_something_else();}); - 5 bad_idea: - - - It is just as illegal to transfer control into the middle of - RCU_NONIDLE()'s argument. Yes, in theory, you could transfer in - as long as you also transferred out, but in practice you could also - expect to get sharply worded review comments. +``CONFIG_PROVE_RCU=y`` will splat if you try it.) It is similarly socially unacceptable to interrupt an ``nohz_full`` CPU running in userspace. RCU must therefore track ``nohz_full`` userspace diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index 8eddef28d3a1..e488c8e557a9 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -1117,7 +1117,6 @@ All: lockdep-checked RCU utility APIs:: RCU_LOCKDEP_WARN rcu_sleep_check - RCU_NONIDLE All: Unchecked RCU-protected pointer access:: diff --git a/Documentation/admin-guide/acpi/ssdt-overlays.rst b/Documentation/admin-guide/acpi/ssdt-overlays.rst index b5fbf54dca19..5ea9f4a3b76e 100644 --- a/Documentation/admin-guide/acpi/ssdt-overlays.rst +++ b/Documentation/admin-guide/acpi/ssdt-overlays.rst @@ -103,7 +103,7 @@ allows a persistent, OS independent way of storing the user defined SSDTs. There is also work underway to implement EFI support for loading user defined SSDTs and using this method will make it easier to convert to the EFI loading mechanism when that will arrive. To enable it, the -CONFIG_EFI_CUSTOM_SSDT_OVERLAYS shoyld be chosen to y. +CONFIG_EFI_CUSTOM_SSDT_OVERLAYS should be chosen to y. In order to load SSDTs from an EFI variable the ``"efivar_ssdt=..."`` kernel command line parameter can be used (the name has a limitation of 16 characters). diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst index bb5032a99234..6fdb495ac466 100644 --- a/Documentation/admin-guide/bcache.rst +++ b/Documentation/admin-guide/bcache.rst @@ -508,9 +508,6 @@ cache_miss_collisions cache miss, but raced with a write and data was already present (usually 0 since the synchronization for cache misses was rewritten) -cache_readaheads - Count of times readahead occurred. - Sysfs - cache set ~~~~~~~~~~~~~~~~~ diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst index 47d1d7d932a8..fabaad3fd9c2 100644 --- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -297,7 +297,7 @@ Lock order is as follows:: Page lock (PG_locked bit of page->flags) mm->page_table_lock or split pte_lock - lock_page_memcg (memcg->move_lock) + folio_memcg_lock (memcg->move_lock) mapping->i_pages lock lruvec->lru_lock. diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index f67c0829350b..4ef890191196 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1213,23 +1213,25 @@ PAGE_SIZE multiple when read back. A read-write single value file which exists on non-root cgroups. The default is "max". - Memory usage throttle limit. This is the main mechanism to - control memory usage of a cgroup. If a cgroup's usage goes + Memory usage throttle limit. If a cgroup's usage goes over the high boundary, the processes of the cgroup are throttled and put under heavy reclaim pressure. Going over the high limit never invokes the OOM killer and - under extreme conditions the limit may be breached. + under extreme conditions the limit may be breached. The high + limit should be used in scenarios where an external process + monitors the limited cgroup to alleviate heavy reclaim + pressure. memory.max A read-write single value file which exists on non-root cgroups. The default is "max". - Memory usage hard limit. This is the final protection - mechanism. If a cgroup's memory usage reaches this limit and - can't be reduced, the OOM killer is invoked in the cgroup. - Under certain circumstances, the usage may go over the limit - temporarily. + Memory usage hard limit. This is the main mechanism to limit + memory usage of a cgroup. If a cgroup's memory usage reaches + this limit and can't be reduced, the OOM killer is invoked in + the cgroup. Under certain circumstances, the usage may go + over the limit temporarily. In default configuration regular 0-order allocations always succeed unless OOM killer chooses current task as a victim. @@ -1238,10 +1240,6 @@ PAGE_SIZE multiple when read back. Caller could retry them differently, return into userspace as -ENOMEM or silently ignore in cases like disk readahead. - This is the ultimate protection mechanism. As long as the - high limit is used and monitored properly, this limit's - utility is limited to providing the final safety net. - memory.reclaim A write-only nested-keyed file which exists for all cgroups. @@ -1582,6 +1580,13 @@ PAGE_SIZE multiple when read back. Healthy workloads are not expected to reach this limit. + memory.swap.peak + A read-only single value file which exists on non-root + cgroups. + + The max swap usage recorded for the cgroup and its + descendants since the creation of the cgroup. + memory.swap.max A read-write single value file which exists on non-root cgroups. The default is "max". @@ -2024,31 +2029,33 @@ that attribute: no-change Do not modify the I/O priority class. - none-to-rt - For requests that do not have an I/O priority class (NONE), - change the I/O priority class into RT. Do not modify - the I/O priority class of other requests. + promote-to-rt + For requests that have a non-RT I/O priority class, change it into RT. + Also change the priority level of these requests to 4. Do not modify + the I/O priority of requests that have priority class RT. restrict-to-be For requests that do not have an I/O priority class or that have I/O - priority class RT, change it into BE. Do not modify the I/O priority - class of requests that have priority class IDLE. + priority class RT, change it into BE. Also change the priority level + of these requests to 0. Do not modify the I/O priority class of + requests that have priority class IDLE. idle Change the I/O priority class of all requests into IDLE, the lowest I/O priority class. + none-to-rt + Deprecated. Just an alias for promote-to-rt. + The following numerical values are associated with the I/O priority policies: -+-------------+---+ -| no-change | 0 | -+-------------+---+ -| none-to-rt | 1 | -+-------------+---+ -| rt-to-be | 2 | -+-------------+---+ -| all-to-idle | 3 | -+-------------+---+ ++----------------+---+ +| no-change | 0 | ++----------------+---+ +| rt-to-be | 2 | ++----------------+---+ +| all-to-idle | 3 | ++----------------+---+ The numerical value that corresponds to each I/O priority class is as follows: @@ -2064,9 +2071,13 @@ The numerical value that corresponds to each I/O priority class is as follows: The algorithm to set the I/O priority class for a request is as follows: -- Translate the I/O priority class policy into a number. -- Change the request I/O priority class into the maximum of the I/O priority - class policy number and the numerical I/O priority class. +- If I/O priority class policy is promote-to-rt, change the request I/O + priority class to IOPRIO_CLASS_RT and change the request I/O priority + level to 4. +- If I/O priorityt class is not promote-to-rt, translate the I/O priority + class policy into a number, then change the request I/O priority class + into the maximum of the I/O priority class policy number and the numerical + I/O priority class. PID --- @@ -2439,7 +2450,7 @@ Miscellaneous controller provides 3 interface files. If two misc resources (res_ res_b 10 misc.current - A read-only flat-keyed file shown in the non-root cgroups. It shows + A read-only flat-keyed file shown in the all cgroups. It shows the current usage of the resources in the cgroup and its children.:: $ cat misc.current diff --git a/Documentation/admin-guide/cifs/changes.rst b/Documentation/admin-guide/cifs/changes.rst index 3147bbae9c43..8c42c4de510b 100644 --- a/Documentation/admin-guide/cifs/changes.rst +++ b/Documentation/admin-guide/cifs/changes.rst @@ -5,5 +5,5 @@ Changes See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary information about fixes/improvements to CIFS/SMB2/SMB3 support (changes to cifs.ko module) by kernel version (and cifs internal module version). -This may be easier to read than parsing the output of "git log fs/cifs" -by release. +This may be easier to read than parsing the output of +"git log fs/smb/client" by release. diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst index 2e151cd8c2e4..5f936b4b6018 100644 --- a/Documentation/admin-guide/cifs/usage.rst +++ b/Documentation/admin-guide/cifs/usage.rst @@ -45,7 +45,7 @@ Installation instructions If you have built the CIFS vfs as module (successfully) simply type ``make modules_install`` (or if you prefer, manually copy the file to -the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko). +the modules directory e.g. /lib/modules/6.3.0-060300-generic/kernel/fs/smb/client/cifs.ko). If you have built the CIFS vfs into the kernel itself, follow the instructions for your distribution on how to install a new kernel (usually you @@ -66,15 +66,15 @@ If cifs is built as a module, then the size and number of network buffers and maximum number of simultaneous requests to one server can be configured. Changing these from their defaults is not recommended. By executing modinfo:: - modinfo kernel/fs/cifs/cifs.ko + modinfo <path to cifs.ko> -on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made +on kernel/fs/smb/client/cifs.ko the list of configuration changes that can be made at module initialization time (by running insmod cifs.ko) can be seen. Recommendations =============== -To improve security the SMB2.1 dialect or later (usually will get SMB3) is now +To improve security the SMB2.1 dialect or later (usually will get SMB3.1.1) is now the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0" on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is much older and less secure than the default dialect SMB3 which includes diff --git a/Documentation/admin-guide/device-mapper/dm-flakey.rst b/Documentation/admin-guide/device-mapper/dm-flakey.rst index f7104c01b0f7..f967c5fea219 100644 --- a/Documentation/admin-guide/device-mapper/dm-flakey.rst +++ b/Documentation/admin-guide/device-mapper/dm-flakey.rst @@ -67,6 +67,16 @@ Optional feature parameters: Perform the replacement only if bio->bi_opf has all the selected flags set. + random_read_corrupt <probability> + During <down interval>, replace random byte in a read bio + with a random value. probability is an integer between + 0 and 1000000000 meaning 0% to 100% probability of corruption. + + random_write_corrupt <probability> + During <down interval>, replace random byte in a write bio + with a random value. probability is an integer between + 0 and 1000000000 meaning 0% to 100% probability of corruption. + Examples: Replaces the 32nd byte of READ bios with the value 1:: diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst index 8db172efa272..d8a5f14d0e3c 100644 --- a/Documentation/admin-guide/device-mapper/dm-integrity.rst +++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst @@ -25,7 +25,7 @@ mode it calculates and verifies the integrity tag internally. In this mode, the dm-integrity target can be used to detect silent data corruption on the disk or in the I/O path. -There's an alternate mode of operation where dm-integrity uses bitmap +There's an alternate mode of operation where dm-integrity uses a bitmap instead of a journal. If a bit in the bitmap is 1, the corresponding region's data and integrity tags are not synchronized - if the machine crashes, the unsynchronized regions will be recalculated. The bitmap mode @@ -38,6 +38,15 @@ the device. But it will only format the device if the superblock contains zeroes. If the superblock is neither valid nor zeroed, the dm-integrity target can't be loaded. +Accesses to the on-disk metadata area containing checksums (aka tags) are +buffered using dm-bufio. When an access to any given metadata area +occurs, each unique metadata area gets its own buffer(s). The buffer size +is capped at the size of the metadata area, but may be smaller, thereby +requiring multiple buffers to represent the full metadata area. A smaller +buffer size will produce a smaller resulting read/write operation to the +metadata area for small reads/writes. The metadata is still read even in +a full write to the data covered by a single buffer. + To use the target for the first time: 1. overwrite the superblock with zeroes @@ -93,7 +102,7 @@ journal_sectors:number device. If the device is already formatted, the value from the superblock is used. -interleave_sectors:number +interleave_sectors:number (default 32768) The number of interleaved sectors. This values is rounded down to a power of two. If the device is already formatted, the value from the superblock is used. @@ -102,20 +111,16 @@ meta_device:device Don't interleave the data and metadata on the device. Use a separate device for metadata. -buffer_sectors:number - The number of sectors in one buffer. The value is rounded down to - a power of two. - - The tag area is accessed using buffers, the buffer size is - configurable. The large buffer size means that the I/O size will - be larger, but there could be less I/Os issued. +buffer_sectors:number (default 128) + The number of sectors in one metadata buffer. The value is rounded + down to a power of two. -journal_watermark:number +journal_watermark:number (default 50) The journal watermark in percents. When the size of the journal exceeds this watermark, the thread that flushes the journal will be started. -commit_time:number +commit_time:number (default 10000) Commit time in milliseconds. When this time passes, the journal is written. The journal is also written immediately if the FLUSH request is received. @@ -163,11 +168,10 @@ journal_mac:algorithm(:key) (the key is optional) the journal. Thus, modified sector number would be detected at this stage. -block_size:number - The size of a data block in bytes. The larger the block size the +block_size:number (default 512) + The size of a data block in bytes. The larger the block size the less overhead there is for per-block integrity metadata. - Supported values are 512, 1024, 2048 and 4096 bytes. If not - specified the default block size is 512 bytes. + Supported values are 512, 1024, 2048 and 4096 bytes. sectors_per_bit:number In the bitmap mode, this parameter specifies the number of @@ -209,6 +213,12 @@ table and swap the tables with suspend and resume). The other arguments should not be changed when reloading the target because the layout of disk data depend on them and the reloaded target would be non-functional. +For example, on a device using the default interleave_sectors of 32768, a +block_size of 512, and an internal_hash of crc32c with a tag size of 4 +bytes, it will take 128 KiB of tags to track a full data area, requiring +256 sectors of metadata per data area. With the default buffer_sectors of +128, that means there will be 2 buffers per metadata area, or 2 buffers +per 16 MiB of data. Status line: @@ -286,7 +296,8 @@ The layout of the formatted block device: Each run contains: * tag area - it contains integrity tags. There is one tag for each - sector in the data area + sector in the data area. The size of this area is always 4KiB or + greater. * data area - it contains data sectors. The number of data sectors in one run must be a power of two. log2 of this value is stored in the superblock. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 9e5bab29685f..a1457995fd41 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1,17 +1,17 @@ - acpi= [HW,ACPI,X86,ARM64] + acpi= [HW,ACPI,X86,ARM64,RISCV64] Advanced Configuration and Power Interface Format: { force | on | off | strict | noirq | rsdt | copy_dsdt } force -- enable ACPI if default was off - on -- enable ACPI but allow fallback to DT [arm64] + on -- enable ACPI but allow fallback to DT [arm64,riscv64] off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force" - are available + For ARM64 and RISCV64, ONLY "acpi=off", "acpi=on" or + "acpi=force" are available See also Documentation/power/runtime_pm.rst, pci=noacpi @@ -304,7 +304,7 @@ EL0 is indicated by /sys/devices/system/cpu/aarch32_el0 and hot-unplug operations may be restricted. - See Documentation/arm64/asymmetric-32bit.rst for more + See Documentation/arch/arm64/asymmetric-32bit.rst for more information. amd_iommu= [HW,X86-64] @@ -323,6 +323,7 @@ option with care. pgtbl_v1 - Use v1 page table for DMA-API (Default). pgtbl_v2 - Use v2 page table for DMA-API. + irtcachedis - Disable Interrupt Remapping Table (IRT) caching. amd_iommu_dump= [HW,X86-64] Enable AMD IOMMU driver option to dump the ACPI table @@ -429,6 +430,9 @@ arm64.nosme [ARM64] Unconditionally disable Scalable Matrix Extension support + arm64.nomops [ARM64] Unconditionally disable Memory Copy and Memory + Set instructions support + ataflop= [HW,M68k] atarimouse= [HW,MOUSE] Atari Mouse @@ -818,20 +822,6 @@ Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] - cpu0_hotplug [X86] Turn on CPU0 hotplug feature when - CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off. - Some features depend on CPU0. Known dependencies are: - 1. Resume from suspend/hibernate depends on CPU0. - Suspend/hibernate will fail if CPU0 is offline and you - need to online CPU0 before suspend/hibernate. - 2. PIC interrupts also depend on CPU0. CPU0 can't be - removed if a PIC interrupt is detected. - It's said poweroff/reboot may depend on CPU0 on some - machines although I haven't seen such issues so far - after CPU0 is offline on a few tested machines. - If the dependencies are under your control, you can - turn on cpu0_hotplug. - cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system @@ -852,6 +842,12 @@ on every CPU online, such as boot, and resume from suspend. Default: 10000 + cpuhp.parallel= + [SMP] Enable/disable parallel bringup of secondary CPUs + Format: <bool> + Default is enabled if CONFIG_HOTPLUG_PARALLEL=y. Otherwise + the parameter has no effect. + crash_kexec_post_notifiers Run kdump after running panic-notifiers and dumping kmsg. This only for the users who doubt kdump always @@ -2117,6 +2113,16 @@ disable Do not enable intel_pstate as the default scaling driver for the supported processors + active + Use intel_pstate driver to bypass the scaling + governors layer of cpufreq and provides it own + algorithms for p-state selection. There are two + P-state selection algorithms provided by + intel_pstate in the active mode: powersave and + performance. The way they both operate depends + on whether or not the hardware managed P-states + (HWP) feature has been enabled in the processor + and possibly on the processor model. passive Use intel_pstate as a scaling driver, but configure it to work with generic cpufreq governors (instead of @@ -2551,12 +2557,13 @@ If the value is 0 (the default), KVM will pick a period based on the ratio, such that a page is zapped after 1 hour on average. - kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM. - Default is 1 (enabled) + kvm-amd.nested= [KVM,AMD] Control nested virtualization feature in + KVM/SVM. Default is 1 (enabled). - kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU) - for all guests. - Default is 1 (enabled) if in 64-bit or 32-bit PAE mode. + kvm-amd.npt= [KVM,AMD] Control KVM's use of Nested Page Tables, + a.k.a. Two-Dimensional Page Tables. Default is 1 + (enabled). Disable by KVM if hardware lacks support + for NPT. kvm-arm.mode= [KVM,ARM] Select one of KVM/arm64's modes of operation. @@ -2602,30 +2609,33 @@ Format: <integer> Default: 5 - kvm-intel.ept= [KVM,Intel] Disable extended page tables - (virtualized MMU) support on capable Intel chips. - Default is 1 (enabled) + kvm-intel.ept= [KVM,Intel] Control KVM's use of Extended Page Tables, + a.k.a. Two-Dimensional Page Tables. Default is 1 + (enabled). Disable by KVM if hardware lacks support + for EPT. kvm-intel.emulate_invalid_guest_state= - [KVM,Intel] Disable emulation of invalid guest state. - Ignored if kvm-intel.enable_unrestricted_guest=1, as - guest state is never invalid for unrestricted guests. - This param doesn't apply to nested guests (L2), as KVM - never emulates invalid L2 guest state. - Default is 1 (enabled) + [KVM,Intel] Control whether to emulate invalid guest + state. Ignored if kvm-intel.enable_unrestricted_guest=1, + as guest state is never invalid for unrestricted + guests. This param doesn't apply to nested guests (L2), + as KVM never emulates invalid L2 guest state. + Default is 1 (enabled). kvm-intel.flexpriority= - [KVM,Intel] Disable FlexPriority feature (TPR shadow). - Default is 1 (enabled) + [KVM,Intel] Control KVM's use of FlexPriority feature + (TPR shadow). Default is 1 (enabled). Disalbe by KVM if + hardware lacks support for it. kvm-intel.nested= - [KVM,Intel] Enable VMX nesting (nVMX). - Default is 0 (disabled) + [KVM,Intel] Control nested virtualization feature in + KVM/VMX. Default is 1 (enabled). kvm-intel.unrestricted_guest= - [KVM,Intel] Disable unrestricted guest feature - (virtualized real and unpaged mode) on capable - Intel chips. Default is 1 (enabled) + [KVM,Intel] Control KVM's use of unrestricted guest + feature (virtualized real and unpaged mode). Default + is 1 (enabled). Disable by KVM if EPT is disabled or + hardware lacks support for it. kvm-intel.vmentry_l1d_flush=[KVM,Intel] Mitigation for L1 Terminal Fault CVE-2018-3620. @@ -2639,9 +2649,10 @@ Default is cond (do L1 cache flush in specific instances) - kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification - feature (tagged TLBs) on capable Intel chips. - Default is 1 (enabled) + kvm-intel.vpid= [KVM,Intel] Control KVM's use of Virtual Processor + Identification feature (tagged TLBs). Default is 1 + (enabled). Disable by KVM if hardware lacks support + for it. l1d_flush= [X86,INTEL] Control mitigation for L1D based snooping vulnerability. @@ -3423,6 +3434,10 @@ [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) or cooked coordinates ('n') + mtrr=debug [X86] + Enable printing debug information related to MTRR + registers at boot time. + mtrr_chunk_size=nn[KMG] [X86] used for mtrr cleanup. It is largest continuous chunk that could hold holes aka. UC entries. @@ -3702,8 +3717,8 @@ nohibernate [HIBERNATION] Disable hibernation and resume. - nohlt [ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait - in do_idle() and not use the arch_cpu_idle() + nohlt [ARM,ARM64,MICROBLAZE,MIPS,SH] Forces the kernel to + busy wait in do_idle() and not use the arch_cpu_idle() implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP to be effective. This is useful on platforms where the sleep(SH) or wfi(ARM,ARM64) instructions do not work @@ -3838,7 +3853,7 @@ nosmp [SMP] Tells an SMP kernel to act as a UP kernel, and disable the IO APIC. legacy for "maxcpus=0". - nosmt [KNL,S390] Disable symmetric multithreading (SMT). + nosmt [KNL,MIPS,S390] Disable symmetric multithreading (SMT). Equivalent to smt=1. [KNL,X86] Disable symmetric multithreading (SMT). @@ -4049,7 +4064,7 @@ extra details on the taint flags that users can pick to compose the bitmask to assign to panic_on_taint. - panic_on_warn panic() instead of WARN(). Useful to cause kdump + panic_on_warn=1 panic() instead of WARN(). Useful to cause kdump on a WARN(). parkbd.port= [HW] Parallel port number the keyboard adapter is @@ -4736,43 +4751,6 @@ the propagation of recent CPU-hotplug changes up the rcu_node combining tree. - rcutree.use_softirq= [KNL] - If set to zero, move all RCU_SOFTIRQ processing to - per-CPU rcuc kthreads. Defaults to a non-zero - value, meaning that RCU_SOFTIRQ is used by default. - Specify rcutree.use_softirq=0 to use rcuc kthreads. - - But note that CONFIG_PREEMPT_RT=y kernels disable - this kernel boot parameter, forcibly setting it - to zero. - - rcutree.rcu_fanout_exact= [KNL] - Disable autobalancing of the rcu_node combining - tree. This is used by rcutorture, and might - possibly be useful for architectures having high - cache-to-cache transfer latencies. - - rcutree.rcu_fanout_leaf= [KNL] - Change the number of CPUs assigned to each - leaf rcu_node structure. Useful for very - large systems, which will choose the value 64, - and for NUMA systems with large remote-access - latencies, which will choose a value aligned - with the appropriate hardware boundaries. - - rcutree.rcu_min_cached_objs= [KNL] - Minimum number of objects which are cached and - maintained per one CPU. Object size is equal - to PAGE_SIZE. The cache allows to reduce the - pressure to page allocator, also it makes the - whole algorithm to behave better in low memory - condition. - - rcutree.rcu_delay_page_cache_fill_msec= [KNL] - Set the page-cache refill delay (in milliseconds) - in response to low-memory conditions. The range - of permitted values is in the range 0:100000. - rcutree.jiffies_till_first_fqs= [KNL] Set delay from grace-period initialization to first attempt to force quiescent states. @@ -4811,21 +4789,6 @@ When RCU_NOCB_CPU is set, also adjust the priority of NOCB callback kthreads. - rcutree.rcu_divisor= [KNL] - Set the shift-right count to use to compute - the callback-invocation batch limit bl from - the number of callbacks queued on this CPU. - The result will be bounded below by the value of - the rcutree.blimit kernel parameter. Every bl - callbacks, the softirq handler will exit in - order to allow the CPU to do other work. - - Please note that this callback-invocation batch - limit applies only to non-offloaded callback - invocation. Offloaded callbacks are instead - invoked in the context of an rcuoc kthread, which - scheduler will preempt as it does any other task. - rcutree.nocb_nobypass_lim_per_jiffy= [KNL] On callback-offloaded (rcu_nocbs) CPUs, RCU reduces the lock contention that would @@ -4839,14 +4802,6 @@ the ->nocb_bypass queue. The definition of "too many" is supplied by this kernel boot parameter. - rcutree.rcu_nocb_gp_stride= [KNL] - Set the number of NOCB callback kthreads in - each group, which defaults to the square root - of the number of CPUs. Larger numbers reduce - the wakeup overhead on the global grace-period - kthread, but increases that same overhead on - each group's NOCB grace-period kthread. - rcutree.qhimark= [KNL] Set threshold of queued RCU callbacks beyond which batch limiting is disabled. @@ -4864,6 +4819,56 @@ on rcutree.qhimark at boot time and to zero to disable more aggressive help enlistment. + rcutree.rcu_delay_page_cache_fill_msec= [KNL] + Set the page-cache refill delay (in milliseconds) + in response to low-memory conditions. The range + of permitted values is in the range 0:100000. + + rcutree.rcu_divisor= [KNL] + Set the shift-right count to use to compute + the callback-invocation batch limit bl from + the number of callbacks queued on this CPU. + The result will be bounded below by the value of + the rcutree.blimit kernel parameter. Every bl + callbacks, the softirq handler will exit in + order to allow the CPU to do other work. + + Please note that this callback-invocation batch + limit applies only to non-offloaded callback + invocation. Offloaded callbacks are instead + invoked in the context of an rcuoc kthread, which + scheduler will preempt as it does any other task. + + rcutree.rcu_fanout_exact= [KNL] + Disable autobalancing of the rcu_node combining + tree. This is used by rcutorture, and might + possibly be useful for architectures having high + cache-to-cache transfer latencies. + + rcutree.rcu_fanout_leaf= [KNL] + Change the number of CPUs assigned to each + leaf rcu_node structure. Useful for very + large systems, which will choose the value 64, + and for NUMA systems with large remote-access + latencies, which will choose a value aligned + with the appropriate hardware boundaries. + + rcutree.rcu_min_cached_objs= [KNL] + Minimum number of objects which are cached and + maintained per one CPU. Object size is equal + to PAGE_SIZE. The cache allows to reduce the + pressure to page allocator, also it makes the + whole algorithm to behave better in low memory + condition. + + rcutree.rcu_nocb_gp_stride= [KNL] + Set the number of NOCB callback kthreads in + each group, which defaults to the square root + of the number of CPUs. Larger numbers reduce + the wakeup overhead on the global grace-period + kthread, but increases that same overhead on + each group's NOCB grace-period kthread. + rcutree.rcu_kick_kthreads= [KNL] Cause the grace-period kthread to get an extra wake_up() if it sleeps three times longer than @@ -4871,6 +4876,13 @@ This wake_up() will be accompanied by a WARN_ONCE() splat and an ftrace_dump(). + rcutree.rcu_resched_ns= [KNL] + Limit the time spend invoking a batch of RCU + callbacks to the specified number of nanoseconds. + By default, this limit is checked only once + every 32 callbacks in order to limit the pain + inflicted by local_clock() overhead. + rcutree.rcu_unlock_delay= [KNL] In CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels, this specifies an rcu_read_unlock()-time delay @@ -4885,6 +4897,16 @@ rcu_node tree with an eye towards determining why a new grace period has not yet started. + rcutree.use_softirq= [KNL] + If set to zero, move all RCU_SOFTIRQ processing to + per-CPU rcuc kthreads. Defaults to a non-zero + value, meaning that RCU_SOFTIRQ is used by default. + Specify rcutree.use_softirq=0 to use rcuc kthreads. + + But note that CONFIG_PREEMPT_RT=y kernels disable + this kernel boot parameter, forcibly setting it + to zero. + rcuscale.gp_async= [KNL] Measure performance of asynchronous grace-period primitives such as call_rcu(). @@ -5087,8 +5109,17 @@ rcutorture.stall_cpu_block= [KNL] Sleep while stalling if set. This will result - in warnings from preemptible RCU in addition - to any other stall-related activity. + in warnings from preemptible RCU in addition to + any other stall-related activity. Note that + in kernels built with CONFIG_PREEMPTION=n and + CONFIG_PREEMPT_COUNT=y, this parameter will + cause the CPU to pass through a quiescent state. + Given CONFIG_PREEMPTION=n, this will suppress + RCU CPU stall warnings, but will instead result + in scheduling-while-atomic splats. + + Use of this module parameter results in splats. + rcutorture.stall_cpu_holdoff= [KNL] Time to wait (s) after boot before inducing stall. @@ -5452,7 +5483,12 @@ port and the regular usb controller gets disabled. root= [KNL] Root filesystem - See name_to_dev_t comment in init/do_mounts.c. + Usually this a a block device specifier of some kind, + see the early_lookup_bdev comment in + block/early-lookup.c for details. + Alternatively this can be "ram" for the legacy initial + ramdisk, "nfs" and "cifs" for root on a network file + system, or "mtd" and "ubi" for mounting from raw flash. rootdelay= [KNL] Delay (in seconds) to pause before attempting to mount the root filesystem @@ -5735,7 +5771,7 @@ 1: Fast pin select (default) 2: ATC IRMode - smt= [KNL,S390] Set the maximum number of threads (logical + smt= [KNL,MIPS,S390] Set the maximum number of threads (logical CPUs) to use per physical CPU on systems capable of symmetric multithreading (SMT). Will be capped to the actual hardware limit. @@ -6563,6 +6599,12 @@ unknown_nmi_panic [X86] Cause panic on unknown NMI. + unwind_debug [X86-64] + Enable unwinder debug output. This can be + useful for debugging certain unwinder error + conditions, including corrupt stacks and + bad/missing unwinder metadata. + usbcore.authorized_default= [USB] Default USB device authorization: (default -1 = authorized except for wireless USB, @@ -6931,6 +6973,18 @@ it can be updated at runtime by writing to the corresponding sysfs file. + workqueue.cpu_intensive_thresh_us= + Per-cpu work items which run for longer than this + threshold are automatically considered CPU intensive + and excluded from concurrency management to prevent + them from noticeably delaying other per-cpu work + items. Default is 10000 (10ms). + + If CONFIG_WQ_CPU_INTENSIVE_REPORT is set, the kernel + will report the work functions which violate this + threshold repeatedly. They are likely good + candidates for using WQ_UNBOUND workqueues instead. + workqueue.disable_numa By default, all work items queued to unbound workqueues are affine to the NUMA nodes they're diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst index ccf418713623..6f14d9561fa5 100644 --- a/Documentation/admin-guide/media/rkisp1.rst +++ b/Documentation/admin-guide/media/rkisp1.rst @@ -10,8 +10,8 @@ Introduction ============ This file documents the driver for the Rockchip ISP1 that is part of RK3288 -and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1 -and uses the Media-Controller API. +and RK3399 SoCs. The driver is located under drivers/media/platform/rockchip/ +rkisp1 and uses the Media-Controller API. Revisions ========= diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst index 9f88afc734da..7aa0071ff1c3 100644 --- a/Documentation/admin-guide/mm/damon/start.rst +++ b/Documentation/admin-guide/mm/damon/start.rst @@ -119,9 +119,9 @@ set size has chronologically changed.:: Data Access Pattern Aware Memory Management =========================================== -Below three commands make every memory region of size >=4K that doesn't -accessed for >=60 seconds in your workload to be swapped out. :: +Below command makes every memory region of size >=4K that has not accessed for +>=60 seconds in your workload to be swapped out. :: - $ echo "#min-size max-size min-acc max-acc min-age max-age action" > test_scheme - $ echo "4K max 0 0 60s max pageout" >> test_scheme - $ damo schemes -c test_scheme <pid of your workload> + $ sudo damo schemes --damos_access_rate 0 0 --damos_sz_region 4K max \ + --damos_age 60s max --damos_action pageout \ + <pid of your workload> diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index 9b823fec974d..2d495fa85a0e 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -10,9 +10,8 @@ DAMON provides below interfaces for different users. `This <https://github.com/awslabs/damo>`_ is for privileged people such as system administrators who want a just-working human-friendly interface. Using this, users can use the DAMON’s major features in a human-friendly way. - It may not be highly tuned for special cases, though. It supports both - virtual and physical address spaces monitoring. For more detail, please - refer to its `usage document + It may not be highly tuned for special cases, though. For more detail, + please refer to its `usage document <https://github.com/awslabs/damo/blob/next/USAGE.md>`_. - *sysfs interface.* :ref:`This <sysfs_interface>` is for privileged user space programmers who @@ -20,11 +19,7 @@ DAMON provides below interfaces for different users. features by reading from and writing to special sysfs files. Therefore, you can write and use your personalized DAMON sysfs wrapper programs that reads/writes the sysfs files instead of you. The `DAMON user space tool - <https://github.com/awslabs/damo>`_ is one example of such programs. It - supports both virtual and physical address spaces monitoring. Note that this - interface provides only simple :ref:`statistics <damos_stats>` for the - monitoring results. For detailed monitoring results, DAMON provides a - :ref:`tracepoint <tracepoint>`. + <https://github.com/awslabs/damo>`_ is one example of such programs. - *debugfs interface. (DEPRECATED!)* :ref:`This <debugfs_interface>` is almost identical to :ref:`sysfs interface <sysfs_interface>`. This is deprecated, so users should move to the @@ -139,7 +134,7 @@ scheme of the kdamond. Writing ``clear_schemes_tried_regions`` to ``state`` file clears the DAMON-based operating scheme action tried regions directory for each DAMON-based operation scheme of the kdamond. For details of the DAMON-based operation scheme action tried regions directory, please refer to -:ref:tried_regions section <sysfs_schemes_tried_regions>`. +:ref:`tried_regions section <sysfs_schemes_tried_regions>`. If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread. @@ -259,12 +254,9 @@ be equal or smaller than ``start`` of directory ``N+1``. contexts/<N>/schemes/ --------------------- -For usual DAMON-based data access aware memory management optimizations, users -would normally want the system to apply a memory management action to a memory -region of a specific access pattern. DAMON receives such formalized operation -schemes from the user and applies those to the target memory regions. Users -can get and set the schemes by reading from and writing to files under this -directory. +The directory for DAMON-based Operation Schemes (:ref:`DAMOS +<damon_design_damos>`). Users can get and set the schemes by reading from and +writing to files under this directory. In the beginning, this directory has only one file, ``nr_schemes``. Writing a number (``N``) to the file creates the number of child directories named ``0`` @@ -277,12 +269,12 @@ In each scheme directory, five directories (``access_pattern``, ``quotas``, ``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and one file (``action``) exist. -The ``action`` file is for setting and getting what action you want to apply to -memory regions having specific access pattern of the interest. The keywords -that can be written to and read from the file and their meaning are as below. +The ``action`` file is for setting and getting the scheme's :ref:`action +<damon_design_damos_action>`. The keywords that can be written to and read +from the file and their meaning are as below. Note that support of each action depends on the running DAMON operations set -`implementation <sysfs_contexts>`. +:ref:`implementation <sysfs_contexts>`. - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``. Supported by ``vaddr`` and ``fvaddr`` operations set. @@ -304,32 +296,21 @@ Note that support of each action depends on the running DAMON operations set schemes/<N>/access_pattern/ --------------------------- -The target access pattern of each DAMON-based operation scheme is constructed -with three ranges including the size of the region in bytes, number of -monitored accesses per aggregate interval, and number of aggregated intervals -for the age of the region. +The directory for the target access :ref:`pattern +<damon_design_damos_access_pattern>` of the given DAMON-based operation scheme. Under the ``access_pattern`` directory, three directories (``sz``, ``nr_accesses``, and ``age``) each having two files (``min`` and ``max``) exist. You can set and get the access pattern for the given scheme by writing to and reading from the ``min`` and ``max`` files under ``sz``, -``nr_accesses``, and ``age`` directories, respectively. +``nr_accesses``, and ``age`` directories, respectively. Note that the ``min`` +and the ``max`` form a closed interval. schemes/<N>/quotas/ ------------------- -Optimal ``target access pattern`` for each ``action`` is workload dependent, so -not easy to find. Worse yet, setting a scheme of some action too aggressive -can cause severe overhead. To avoid such overhead, users can limit time and -size quota for each scheme. In detail, users can ask DAMON to try to use only -up to specific time (``time quota``) for applying the action, and to apply the -action to only up to specific amount (``size quota``) of memory regions having -the target access pattern within a given time interval (``reset interval``). - -When the quota limit is expected to be exceeded, DAMON prioritizes found memory -regions of the ``target access pattern`` based on their size, access frequency, -and age. For personalized prioritization, users can set the weights for the -three properties. +The directory for the :ref:`quotas <damon_design_damos_quotas>` of the given +DAMON-based operation scheme. Under ``quotas`` directory, three files (``ms``, ``bytes``, ``reset_interval_ms``) and one directory (``weights``) having three files @@ -337,23 +318,26 @@ Under ``quotas`` directory, three files (``ms``, ``bytes``, You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and ``reset interval`` in milliseconds by writing the values to the three files, -respectively. You can also set the prioritization weights for size, access -frequency, and age in per-thousand unit by writing the values to the three -files under the ``weights`` directory. +respectively. Then, DAMON tries to use only up to ``time quota`` milliseconds +for applying the ``action`` to memory regions of the ``access_pattern``, and to +apply the action to only up to ``bytes`` bytes of memory regions within the +``reset_interval_ms``. Setting both ``ms`` and ``bytes`` zero disables the +quota limits. + +You can also set the :ref:`prioritization weights +<damon_design_damos_quotas_prioritization>` for size, access frequency, and age +in per-thousand unit by writing the values to the three files under the +``weights`` directory. schemes/<N>/watermarks/ ----------------------- -To allow easy activation and deactivation of each scheme based on system -status, DAMON provides a feature called watermarks. The feature receives five -values called ``metric``, ``interval``, ``high``, ``mid``, and ``low``. The -``metric`` is the system metric such as free memory ratio that can be measured. -If the metric value of the system is higher than the value in ``high`` or lower -than ``low`` at the memoent, the scheme is deactivated. If the value is lower -than ``mid``, the scheme is activated. +The directory for the :ref:`watermarks <damon_design_damos_watermarks>` of the +given DAMON-based operation scheme. Under the watermarks directory, five files (``metric``, ``interval_us``, -``high``, ``mid``, and ``low``) for setting each value exist. You can set and +``high``, ``mid``, and ``low``) for setting the metric, the time interval +between check of the metric, and the three watermarks exist. You can set and get the five values by writing to the files, respectively. Keywords and meanings of those that can be written to the ``metric`` file are @@ -367,12 +351,8 @@ The ``interval`` should written in microseconds unit. schemes/<N>/filters/ -------------------- -Users could know something more than the kernel for specific types of memory. -In the case, users could do their own management for the memory and hence -doesn't want DAMOS bothers that. Users could limit DAMOS by setting the access -pattern of the scheme and/or the monitoring regions for the purpose, but that -can be inefficient in some cases. In such cases, users could set non-access -pattern driven filters using files in this directory. +The directory for the :ref:`filters <damon_design_damos_filters>` of the given +DAMON-based operation scheme. In the beginning, this directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directories named ``0`` @@ -432,13 +412,17 @@ starting from ``0`` under this directory. Each directory contains files exposing detailed information about each of the memory region that the corresponding scheme's ``action`` has tried to be applied under this directory, during next :ref:`aggregation interval <sysfs_monitoring_attrs>`. The -information includes address range, ``nr_accesses``, , and ``age`` of the -region. +information includes address range, ``nr_accesses``, and ``age`` of the region. The directories will be removed when another special keyword, ``clear_schemes_tried_regions``, is written to the relevant ``kdamonds/<N>/state`` file. +The expected usage of this directory is investigations of schemes' behaviors, +and query-like efficient data access monitoring results retrievals. For the +latter use case, in particular, users can set the ``action`` as ``stat`` and +set the ``access pattern`` as their interested pattern that they want to query. + tried_regions/<N>/ ------------------ @@ -600,15 +584,10 @@ update. Schemes ------- -For usual DAMON-based data access aware memory management optimizations, users -would simply want the system to apply a memory management action to a memory -region of a specific access pattern. DAMON receives such formalized operation -schemes from the user and applies those to the target processes. - -Users can get and set the schemes by reading from and writing to ``schemes`` -debugfs file. Reading the file also shows the statistics of each scheme. To -the file, each of the schemes should be represented in each line in below -form:: +Users can get and set the DAMON-based operation :ref:`schemes +<damon_design_damos>` by reading from and writing to ``schemes`` debugfs file. +Reading the file also shows the statistics of each scheme. To the file, each +of the schemes should be represented in each line in below form:: <target access pattern> <action> <quota> <watermarks> @@ -617,8 +596,9 @@ You can disable schemes by simply writing an empty string to the file. Target Access Pattern ~~~~~~~~~~~~~~~~~~~~~ -The ``<target access pattern>`` is constructed with three ranges in below -form:: +The target access :ref:`pattern <damon_design_damos_access_pattern>` of the +scheme. The ``<target access pattern>`` is constructed with three ranges in +below form:: min-size max-size min-acc max-acc min-age max-age @@ -631,9 +611,9 @@ closed interval. Action ~~~~~~ -The ``<action>`` is a predefined integer for memory management actions, which -DAMON will apply to the regions having the target access pattern. The -supported numbers and their meanings are as below. +The ``<action>`` is a predefined integer for memory management :ref:`actions +<damon_design_damos_action>`. The supported numbers and their meanings are as +below. - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``. Ignored if ``target`` is ``paddr``. @@ -649,10 +629,8 @@ supported numbers and their meanings are as below. Quota ~~~~~ -Optimal ``target access pattern`` for each ``action`` is workload dependent, so -not easy to find. Worse yet, setting a scheme of some action too aggressive -can cause severe overhead. To avoid such overhead, users can limit time and -size quota for the scheme via the ``<quota>`` in below form:: +Users can set the :ref:`quotas <damon_design_damos_quotas>` of the given scheme +via the ``<quota>`` in below form:: <ms> <sz> <reset interval> <priority weights> @@ -662,19 +640,17 @@ the action to memory regions of the ``target access pattern`` within the ``<sz>`` bytes of memory regions within the ``<reset interval>``. Setting both ``<ms>`` and ``<sz>`` zero disables the quota limits. -When the quota limit is expected to be exceeded, DAMON prioritizes found memory -regions of the ``target access pattern`` based on their size, access frequency, -and age. For personalized prioritization, users can set the weights for the -three properties in ``<priority weights>`` in below form:: +For the :ref:`prioritization <damon_design_damos_quotas_prioritization>`, users +can set the weights for the three properties in ``<priority weights>`` in below +form:: <size weight> <access frequency weight> <age weight> Watermarks ~~~~~~~~~~ -Some schemes would need to run based on current value of the system's specific -metrics like free memory ratio. For such cases, users can specify watermarks -for the condition.:: +Users can specify :ref:`watermarks <damon_design_damos_watermarks>` of the +given scheme via ``<watermarks>`` in below form:: <metric> <check interval> <high mark> <middle mark> <low mark> @@ -797,10 +773,12 @@ root directory only. Tracepoint for Monitoring Results ================================= -DAMON provides the monitoring results via a tracepoint, -``damon:damon_aggregated``. While the monitoring is turned on, you could -record the tracepoint events and show results using tracepoint supporting tools -like ``perf``. For example:: +Users can get the monitoring results via the :ref:`tried_regions +<sysfs_schemes_tried_regions>` or a tracepoint, ``damon:damon_aggregated``. +While the tried regions directory is useful for getting a snapshot, the +tracepoint is useful for getting a full record of the results. While the +monitoring is turned on, you could record the tracepoint events and show +results using tracepoint supporting tools like ``perf``. For example:: # echo on > monitor_on # perf record -e damon:damon_aggregated & diff --git a/Documentation/admin-guide/perf/cxl.rst b/Documentation/admin-guide/perf/cxl.rst new file mode 100644 index 000000000000..9233ea0d0b10 --- /dev/null +++ b/Documentation/admin-guide/perf/cxl.rst @@ -0,0 +1,68 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +CXL Performance Monitoring Unit (CPMU) +====================================== + +The CXL rev 3.0 specification provides a definition of CXL Performance +Monitoring Unit in section 13.2: Performance Monitoring. + +CXL components (e.g. Root Port, Switch Upstream Port, End Point) may have +any number of CPMU instances. CPMU capabilities are fully discoverable from +the devices. The specification provides event definitions for all CXL protocol +message types and a set of additional events for things commonly counted on +CXL devices (e.g. DRAM events). + +CPMU driver +=========== + +The CPMU driver registers a perf PMU with the name pmu_mem<X>.<Y> on the CXL bus +representing the Yth CPMU for memX. + + /sys/bus/cxl/device/pmu_mem<X>.<Y> + +The associated PMU is registered as + + /sys/bus/event_sources/devices/cxl_pmu_mem<X>.<Y> + +In common with other CXL bus devices, the id has no specific meaning and the +relationship to specific CXL device should be established via the device parent +of the device on the CXL bus. + +PMU driver provides description of available events and filter options in sysfs. + +The "format" directory describes all formats of the config (event vendor id, +group id and mask) config1 (threshold, filter enables) and config2 (filter +parameters) fields of the perf_event_attr structure. The "events" directory +describes all documented events show in perf list. + +The events shown in perf list are the most fine grained events with a single +bit of the event mask set. More general events may be enable by setting +multiple mask bits in config. For example, all Device to Host Read Requests +may be captured on a single counter by setting the bits for all of + +* d2h_req_rdcurr +* d2h_req_rdown +* d2h_req_rdshared +* d2h_req_rdany +* d2h_req_rdownnodata + +Example of usage:: + + $#perf list + cxl_pmu_mem0.0/clock_ticks/ [Kernel PMU event] + cxl_pmu_mem0.0/d2h_req_rdshared/ [Kernel PMU event] + cxl_pmu_mem0.0/h2d_req_snpcur/ [Kernel PMU event] + cxl_pmu_mem0.0/h2d_req_snpdata/ [Kernel PMU event] + cxl_pmu_mem0.0/h2d_req_snpinv/ [Kernel PMU event] + ----------------------------------------------------------- + + $# perf stat -a -e cxl_pmu_mem0.0/clock_ticks/ -e cxl_pmu_mem0.0/d2h_req_rdshared/ + +Vendor specific events may also be available and if so can be used via + + $# perf stat -a -e cxl_pmu_mem0.0/vid=VID,gid=GID,mask=MASK/ + +The driver does not support sampling so "perf record" is unsupported. +It only supports system-wide counting so attaching to a task is +unsupported. diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst index 546979360513..e0174d20809a 100644 --- a/Documentation/admin-guide/perf/hisi-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pmu.rst @@ -56,14 +56,14 @@ Example usage of perf:: For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same as PMU v1, but some new functions are added to the hardware. -(a) L3C PMU supports filtering by core/thread within the cluster which can be +1. L3C PMU supports filtering by core/thread within the cluster which can be specified as a bitmap:: $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5 This will only count the operations from core/thread 0 and 1 in this cluster. -(b) Tracetag allow the user to chose to count only read, write or atomic +2. Tracetag allow the user to chose to count only read, write or atomic operations via the tt_req parameeter in perf. The default value counts all operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101 represents write operations, 3'b110 represents atomic store operations and @@ -73,14 +73,16 @@ represents write operations, 3'b110 represents atomic store operations and This will only count the read operations in this cluster. -(c) Datasrc allows the user to check where the data comes from. It is 5 bits. +3. Datasrc allows the user to check where the data comes from. It is 5 bits. Some important codes are as follows: -5'b00001: comes from L3C in this die; -5'b01000: comes from L3C in the cross-die; -5'b01001: comes from L3C which is in another socket; -5'b01110: comes from the local DDR; -5'b01111: comes from the cross-die DDR; -5'b10000: comes from cross-socket DDR; + +- 5'b00001: comes from L3C in this die; +- 5'b01000: comes from L3C in the cross-die; +- 5'b01001: comes from L3C which is in another socket; +- 5'b01110: comes from the local DDR; +- 5'b01111: comes from the cross-die DDR; +- 5'b10000: comes from cross-socket DDR; + etc, it is mainly helpful to find that the data source is nearest from the CPU cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be configured in perf command:: @@ -88,15 +90,25 @@ configured in perf command:: $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/, hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5 -(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die +4. Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die contains several Compute Clusters (CCLs). The I/O dies are called Super I/O clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit CCL/ICL-ID. For I/O die, the ICL-ID is followed by: -5'b00000: I/O_MGMT_ICL; -5'b00001: Network_ICL; -5'b00011: HAC_ICL; -5'b10000: PCIe_ICL; + +- 5'b00000: I/O_MGMT_ICL; +- 5'b00001: Network_ICL; +- 5'b00011: HAC_ICL; +- 5'b10000: PCIe_ICL; + +5. uring_channel: UC PMU events 0x47~0x59 supports filtering by tx request +uring channel. It is 2 bits. Some important codes are as follows: + +- 2'b11: count the events which sent to the uring_ext (MATA) channel; +- 2'b01: is the same as 2'b11; +- 2'b10: count the events which sent to the uring (non-MATA) channel; +- 2'b00: default value, count the events which sent to the both uring and + uring_ext channel; Users could configure IDs to count data come from specific CCL/ICL, by setting srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 9de64a40adab..f60be04e4e33 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -21,3 +21,4 @@ Performance monitor support alibaba_pmu nvidia-pmu meson-ddr-pmu + cxl diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst index 09169d935835..5ab3440e6cee 100644 --- a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst +++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst @@ -5,7 +5,7 @@ Intel Uncore Frequency Scaling ============================== -:Copyright: |copy| 2022 Intel Corporation +:Copyright: |copy| 2022-2023 Intel Corporation :Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> @@ -58,3 +58,58 @@ Each package_*_die_* contains the following attributes: ``current_freq_khz`` This attribute is used to get the current uncore frequency. + +SoCs with TPMI (Topology Aware Register and PM Capsule Interface) +----------------------------------------------------------------- + +An SoC can contain multiple power domains with individual or collection +of mesh partitions. This partition is called fabric cluster. + +Certain type of meshes will need to run at the same frequency, they will +be placed in the same fabric cluster. Benefit of fabric cluster is that it +offers a scalable mechanism to deal with partitioned fabrics in a SoC. + +The current sysfs interface supports controls at package and die level. +This interface is not enough to support more granular control at +fabric cluster level. + +SoCs with the support of TPMI (Topology Aware Register and PM Capsule +Interface), can have multiple power domains. Each power domain can +contain one or more fabric clusters. + +To represent controls at fabric cluster level in addition to the +controls at package and die level (like systems without TPMI +support), sysfs is enhanced. This granular interface is presented in the +sysfs with directories names prefixed with "uncore". For example: +uncore00, uncore01 etc. + +The scope of control is specified by attributes "package_id", "domain_id" +and "fabric_cluster_id" in the directory. + +Attributes in each directory: + +``domain_id`` + This attribute is used to get the power domain id of this instance. + +``fabric_cluster_id`` + This attribute is used to get the fabric cluster id of this instance. + +``package_id`` + This attribute is used to get the package id of this instance. + +The other attributes are same as presented at package_*_die_* level. + +In most of current use cases, the "max_freq_khz" and "min_freq_khz" +is updated at "package_*_die_*" level. This model will be still supported +with the following approach: + +When user uses controls at "package_*_die_*" level, then every fabric +cluster is affected in that package and die. For example: user changes +"max_freq_khz" in the package_00_die_00, then "max_freq_khz" for uncore* +directory with the same package id will be updated. In this case user can +still update "max_freq_khz" at each uncore* level, which is more restrictive. +Similarly, user can update "min_freq_khz" at "package_*_die_*" level +to apply at each uncore* level. + +Support for "current_freq_khz" is available only at each fabric cluster +level (i.e., in uncore* directory). diff --git a/Documentation/admin-guide/quickly-build-trimmed-linux.rst b/Documentation/admin-guide/quickly-build-trimmed-linux.rst index ff4f4cc8522b..f08149bc53f8 100644 --- a/Documentation/admin-guide/quickly-build-trimmed-linux.rst +++ b/Documentation/admin-guide/quickly-build-trimmed-linux.rst @@ -215,12 +215,14 @@ again. reduce the compile time enormously, especially if you are running an universal kernel from a commodity Linux distribution. - There is a catch: the make target 'localmodconfig' will disable kernel - features you have not directly or indirectly through some program utilized - since you booted the system. You can reduce or nearly eliminate that risk by - using tricks outlined in the reference section; for quick testing purposes - that risk is often negligible, but it is an aspect you want to keep in mind - in case your kernel behaves oddly. + There is a catch: 'localmodconfig' is likely to disable kernel features you + did not use since you booted your Linux -- like drivers for currently + disconnected peripherals or a virtualization software not haven't used yet. + You can reduce or nearly eliminate that risk with tricks the reference + section outlines; but when building a kernel just for quick testing purposes + it is often negligible if such features are missing. But you should keep that + aspect in mind when using a kernel built with this make target, as it might + be the reason why something you only use occasionally stopped working. [:ref:`details<configuration>`] @@ -271,6 +273,9 @@ again. does nothing at all; in that case you have to manually install your kernel, as outlined in the reference section. + If you are running a immutable Linux distribution, check its documentation + and the web to find out how to install your own kernel there. + [:ref:`details<install>`] .. _another_sbs: @@ -291,29 +296,29 @@ again. version you care about, as git otherwise might retrieve the entire commit history:: - git fetch --shallow-exclude=v6.1 origin - - If you modified the sources (for example by applying a patch), you now need - to discard those modifications; that's because git otherwise will not be able - to switch to the sources of another version due to potential conflicting - changes:: - - git reset --hard + git fetch --shallow-exclude=v6.0 origin - Now checkout the version you are interested in, as explained above:: + Now switch to the version you are interested in -- but be aware the command + used here will discard any modifications you performed, as they would + conflict with the sources you want to checkout:: - git checkout --detach origin/master + git checkout --force --detach origin/master At this point you might want to patch the sources again or set/modify a build - tag, as explained earlier; afterwards adjust the build configuration to the - new codebase and build your next kernel:: + tag, as explained earlier. Afterwards adjust the build configuration to the + new codebase using olddefconfig, which will now adjust the configuration file + you prepared earlier using localmodconfig (~/linux/.config) for your next + kernel:: # reminder: if you want to apply patches, do it at this point # reminder: you might want to update your build tag at this point make olddefconfig + + Now build your kernel:: + make -j $(nproc --all) - Install the kernel as outlined above:: + Afterwards install the kernel as outlined above:: command -v installkernel && sudo make modules_install install @@ -584,11 +589,11 @@ versions and individual commits at hand at any time:: curl -L \ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/clone.bundle \ -o linux-stable.git.bundle - git clone clone.bundle ~/linux/ + git clone linux-stable.git.bundle ~/linux/ rm linux-stable.git.bundle cd ~/linux/ - git remote set-url origin - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git + git remote set-url origin \ + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git git fetch origin git checkout --detach origin/master diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index d85d90f5d000..3800fab1619b 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -949,7 +949,7 @@ user space can read performance monitor counter registers directly. The default value is 0 (access disabled). -See Documentation/arm64/perf.rst for more information. +See Documentation/arch/arm64/perf.rst for more information. pid_max diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 466c560b0c30..4877563241f3 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -386,8 +386,8 @@ Default : 0 (for compatibility reasons) txrehash -------- -Controls default hash rethink behaviour on listening socket when SO_TXREHASH -option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt). +Controls default hash rethink behaviour on socket when SO_TXREHASH option is set +to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt). If set to 1 (default), hash rethink is performed on listening socket. If set to 0, hash rethink is not performed. diff --git a/Documentation/arm/arm.rst b/Documentation/arch/arm/arm.rst index 99d660fdf73f..99d660fdf73f 100644 --- a/Documentation/arm/arm.rst +++ b/Documentation/arch/arm/arm.rst diff --git a/Documentation/arm/booting.rst b/Documentation/arch/arm/booting.rst index 5974e37b3d20..5974e37b3d20 100644 --- a/Documentation/arm/booting.rst +++ b/Documentation/arch/arm/booting.rst diff --git a/Documentation/arm/cluster-pm-race-avoidance.rst b/Documentation/arch/arm/cluster-pm-race-avoidance.rst index aa58603d3f28..aa58603d3f28 100644 --- a/Documentation/arm/cluster-pm-race-avoidance.rst +++ b/Documentation/arch/arm/cluster-pm-race-avoidance.rst diff --git a/Documentation/arm/features.rst b/Documentation/arch/arm/features.rst index 7414ec03dd15..7414ec03dd15 100644 --- a/Documentation/arm/features.rst +++ b/Documentation/arch/arm/features.rst diff --git a/Documentation/arm/firmware.rst b/Documentation/arch/arm/firmware.rst index efd844baec1d..efd844baec1d 100644 --- a/Documentation/arm/firmware.rst +++ b/Documentation/arch/arm/firmware.rst diff --git a/Documentation/arm/google/chromebook-boot-flow.rst b/Documentation/arch/arm/google/chromebook-boot-flow.rst index 36da77684bba..36da77684bba 100644 --- a/Documentation/arm/google/chromebook-boot-flow.rst +++ b/Documentation/arch/arm/google/chromebook-boot-flow.rst diff --git a/Documentation/arm/index.rst b/Documentation/arch/arm/index.rst index fd43502ae924..fd43502ae924 100644 --- a/Documentation/arm/index.rst +++ b/Documentation/arch/arm/index.rst diff --git a/Documentation/arm/interrupts.rst b/Documentation/arch/arm/interrupts.rst index 2ae70e0e9732..2ae70e0e9732 100644 --- a/Documentation/arm/interrupts.rst +++ b/Documentation/arch/arm/interrupts.rst diff --git a/Documentation/arm/ixp4xx.rst b/Documentation/arch/arm/ixp4xx.rst index a57235616294..a57235616294 100644 --- a/Documentation/arm/ixp4xx.rst +++ b/Documentation/arch/arm/ixp4xx.rst diff --git a/Documentation/arm/kernel_mode_neon.rst b/Documentation/arch/arm/kernel_mode_neon.rst index 9bfb71a2a9b9..9bfb71a2a9b9 100644 --- a/Documentation/arm/kernel_mode_neon.rst +++ b/Documentation/arch/arm/kernel_mode_neon.rst diff --git a/Documentation/arm/kernel_user_helpers.rst b/Documentation/arch/arm/kernel_user_helpers.rst index eb6f3d916622..eb6f3d916622 100644 --- a/Documentation/arm/kernel_user_helpers.rst +++ b/Documentation/arch/arm/kernel_user_helpers.rst diff --git a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arch/arm/keystone/knav-qmss.rst index 7f7638d80b42..7f7638d80b42 100644 --- a/Documentation/arm/keystone/knav-qmss.rst +++ b/Documentation/arch/arm/keystone/knav-qmss.rst diff --git a/Documentation/arm/keystone/overview.rst b/Documentation/arch/arm/keystone/overview.rst index cd90298c493c..cd90298c493c 100644 --- a/Documentation/arm/keystone/overview.rst +++ b/Documentation/arch/arm/keystone/overview.rst diff --git a/Documentation/arm/marvell.rst b/Documentation/arch/arm/marvell.rst index 3d369a566038..3d369a566038 100644 --- a/Documentation/arm/marvell.rst +++ b/Documentation/arch/arm/marvell.rst diff --git a/Documentation/arm/mem_alignment.rst b/Documentation/arch/arm/mem_alignment.rst index aa22893b62bc..aa22893b62bc 100644 --- a/Documentation/arm/mem_alignment.rst +++ b/Documentation/arch/arm/mem_alignment.rst diff --git a/Documentation/arm/memory.rst b/Documentation/arch/arm/memory.rst index 0cb1e2938823..0cb1e2938823 100644 --- a/Documentation/arm/memory.rst +++ b/Documentation/arch/arm/memory.rst diff --git a/Documentation/arm/microchip.rst b/Documentation/arch/arm/microchip.rst index e721d855f2c9..e721d855f2c9 100644 --- a/Documentation/arm/microchip.rst +++ b/Documentation/arch/arm/microchip.rst diff --git a/Documentation/arm/netwinder.rst b/Documentation/arch/arm/netwinder.rst index 8eab66caa2ac..8eab66caa2ac 100644 --- a/Documentation/arm/netwinder.rst +++ b/Documentation/arch/arm/netwinder.rst diff --git a/Documentation/arm/nwfpe/index.rst b/Documentation/arch/arm/nwfpe/index.rst index 3c4d2f9aa10e..3c4d2f9aa10e 100644 --- a/Documentation/arm/nwfpe/index.rst +++ b/Documentation/arch/arm/nwfpe/index.rst diff --git a/Documentation/arm/nwfpe/netwinder-fpe.rst b/Documentation/arch/arm/nwfpe/netwinder-fpe.rst index cbb320960fc4..cbb320960fc4 100644 --- a/Documentation/arm/nwfpe/netwinder-fpe.rst +++ b/Documentation/arch/arm/nwfpe/netwinder-fpe.rst diff --git a/Documentation/arm/nwfpe/notes.rst b/Documentation/arch/arm/nwfpe/notes.rst index 102e55af8439..102e55af8439 100644 --- a/Documentation/arm/nwfpe/notes.rst +++ b/Documentation/arch/arm/nwfpe/notes.rst diff --git a/Documentation/arm/nwfpe/nwfpe.rst b/Documentation/arch/arm/nwfpe/nwfpe.rst index 35cd90dacbff..35cd90dacbff 100644 --- a/Documentation/arm/nwfpe/nwfpe.rst +++ b/Documentation/arch/arm/nwfpe/nwfpe.rst diff --git a/Documentation/arm/nwfpe/todo.rst b/Documentation/arch/arm/nwfpe/todo.rst index 393f11b14540..393f11b14540 100644 --- a/Documentation/arm/nwfpe/todo.rst +++ b/Documentation/arch/arm/nwfpe/todo.rst diff --git a/Documentation/arm/omap/dss.rst b/Documentation/arch/arm/omap/dss.rst index a40c4d9c717a..a40c4d9c717a 100644 --- a/Documentation/arm/omap/dss.rst +++ b/Documentation/arch/arm/omap/dss.rst diff --git a/Documentation/arm/omap/index.rst b/Documentation/arch/arm/omap/index.rst index 8b365b212e49..8b365b212e49 100644 --- a/Documentation/arm/omap/index.rst +++ b/Documentation/arch/arm/omap/index.rst diff --git a/Documentation/arm/omap/omap.rst b/Documentation/arch/arm/omap/omap.rst index f440c0f4613f..f440c0f4613f 100644 --- a/Documentation/arm/omap/omap.rst +++ b/Documentation/arch/arm/omap/omap.rst diff --git a/Documentation/arm/omap/omap_pm.rst b/Documentation/arch/arm/omap/omap_pm.rst index a335e4c8ce2c..a335e4c8ce2c 100644 --- a/Documentation/arm/omap/omap_pm.rst +++ b/Documentation/arch/arm/omap/omap_pm.rst diff --git a/Documentation/arm/porting.rst b/Documentation/arch/arm/porting.rst index bd21958bdb2d..bd21958bdb2d 100644 --- a/Documentation/arm/porting.rst +++ b/Documentation/arch/arm/porting.rst diff --git a/Documentation/arm/pxa/mfp.rst b/Documentation/arch/arm/pxa/mfp.rst index ac34e5d7ee44..ac34e5d7ee44 100644 --- a/Documentation/arm/pxa/mfp.rst +++ b/Documentation/arch/arm/pxa/mfp.rst diff --git a/Documentation/arm/sa1100/assabet.rst b/Documentation/arch/arm/sa1100/assabet.rst index a761e128fb08..a761e128fb08 100644 --- a/Documentation/arm/sa1100/assabet.rst +++ b/Documentation/arch/arm/sa1100/assabet.rst diff --git a/Documentation/arm/sa1100/cerf.rst b/Documentation/arch/arm/sa1100/cerf.rst index 7fa71b609bf9..7fa71b609bf9 100644 --- a/Documentation/arm/sa1100/cerf.rst +++ b/Documentation/arch/arm/sa1100/cerf.rst diff --git a/Documentation/arm/sa1100/index.rst b/Documentation/arch/arm/sa1100/index.rst index c9aed43280ff..c9aed43280ff 100644 --- a/Documentation/arm/sa1100/index.rst +++ b/Documentation/arch/arm/sa1100/index.rst diff --git a/Documentation/arm/sa1100/lart.rst b/Documentation/arch/arm/sa1100/lart.rst index 94c0568d1095..94c0568d1095 100644 --- a/Documentation/arm/sa1100/lart.rst +++ b/Documentation/arch/arm/sa1100/lart.rst diff --git a/Documentation/arm/sa1100/serial_uart.rst b/Documentation/arch/arm/sa1100/serial_uart.rst index ea983642b9be..ea983642b9be 100644 --- a/Documentation/arm/sa1100/serial_uart.rst +++ b/Documentation/arch/arm/sa1100/serial_uart.rst diff --git a/Documentation/arm/samsung/bootloader-interface.rst b/Documentation/arch/arm/samsung/bootloader-interface.rst index a56f325dae78..a56f325dae78 100644 --- a/Documentation/arm/samsung/bootloader-interface.rst +++ b/Documentation/arch/arm/samsung/bootloader-interface.rst diff --git a/Documentation/arm/samsung/clksrc-change-registers.awk b/Documentation/arch/arm/samsung/clksrc-change-registers.awk index 7be1b8aa7cd9..7be1b8aa7cd9 100755 --- a/Documentation/arm/samsung/clksrc-change-registers.awk +++ b/Documentation/arch/arm/samsung/clksrc-change-registers.awk diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arch/arm/samsung/gpio.rst index 27fae0d50361..27fae0d50361 100644 --- a/Documentation/arm/samsung/gpio.rst +++ b/Documentation/arch/arm/samsung/gpio.rst diff --git a/Documentation/arm/samsung/index.rst b/Documentation/arch/arm/samsung/index.rst index 8142cce3d23e..8142cce3d23e 100644 --- a/Documentation/arm/samsung/index.rst +++ b/Documentation/arch/arm/samsung/index.rst diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arch/arm/samsung/overview.rst index 8b15a190169b..8b15a190169b 100644 --- a/Documentation/arm/samsung/overview.rst +++ b/Documentation/arch/arm/samsung/overview.rst diff --git a/Documentation/arm/setup.rst b/Documentation/arch/arm/setup.rst index 8e12ef3fb9a7..8e12ef3fb9a7 100644 --- a/Documentation/arm/setup.rst +++ b/Documentation/arch/arm/setup.rst diff --git a/Documentation/arm/spear/overview.rst b/Documentation/arch/arm/spear/overview.rst index 1a77f6b213b6..1a77f6b213b6 100644 --- a/Documentation/arm/spear/overview.rst +++ b/Documentation/arch/arm/spear/overview.rst diff --git a/Documentation/arm/sti/overview.rst b/Documentation/arch/arm/sti/overview.rst index ae16aced800f..ae16aced800f 100644 --- a/Documentation/arm/sti/overview.rst +++ b/Documentation/arch/arm/sti/overview.rst diff --git a/Documentation/arm/sti/stih407-overview.rst b/Documentation/arch/arm/sti/stih407-overview.rst index 027e75bc7b7c..027e75bc7b7c 100644 --- a/Documentation/arm/sti/stih407-overview.rst +++ b/Documentation/arch/arm/sti/stih407-overview.rst diff --git a/Documentation/arm/sti/stih418-overview.rst b/Documentation/arch/arm/sti/stih418-overview.rst index b563c1f4fe5a..b563c1f4fe5a 100644 --- a/Documentation/arm/sti/stih418-overview.rst +++ b/Documentation/arch/arm/sti/stih418-overview.rst diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arch/arm/stm32/overview.rst index 85cfc8410798..85cfc8410798 100644 --- a/Documentation/arm/stm32/overview.rst +++ b/Documentation/arch/arm/stm32/overview.rst diff --git a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst index 2945e0e33104..2945e0e33104 100644 --- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst +++ b/Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arch/arm/stm32/stm32f429-overview.rst index a7ebe8ea6697..a7ebe8ea6697 100644 --- a/Documentation/arm/stm32/stm32f429-overview.rst +++ b/Documentation/arch/arm/stm32/stm32f429-overview.rst diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arch/arm/stm32/stm32f746-overview.rst index 78befddc7740..78befddc7740 100644 --- a/Documentation/arm/stm32/stm32f746-overview.rst +++ b/Documentation/arch/arm/stm32/stm32f746-overview.rst diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arch/arm/stm32/stm32f769-overview.rst index e482980ddf21..e482980ddf21 100644 --- a/Documentation/arm/stm32/stm32f769-overview.rst +++ b/Documentation/arch/arm/stm32/stm32f769-overview.rst diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arch/arm/stm32/stm32h743-overview.rst index 4e15f1a42730..4e15f1a42730 100644 --- a/Documentation/arm/stm32/stm32h743-overview.rst +++ b/Documentation/arch/arm/stm32/stm32h743-overview.rst diff --git a/Documentation/arm/stm32/stm32h750-overview.rst b/Documentation/arch/arm/stm32/stm32h750-overview.rst index 0e51235c9547..0e51235c9547 100644 --- a/Documentation/arm/stm32/stm32h750-overview.rst +++ b/Documentation/arch/arm/stm32/stm32h750-overview.rst diff --git a/Documentation/arm/stm32/stm32mp13-overview.rst b/Documentation/arch/arm/stm32/stm32mp13-overview.rst index 3bb9492dad49..3bb9492dad49 100644 --- a/Documentation/arm/stm32/stm32mp13-overview.rst +++ b/Documentation/arch/arm/stm32/stm32mp13-overview.rst diff --git a/Documentation/arm/stm32/stm32mp151-overview.rst b/Documentation/arch/arm/stm32/stm32mp151-overview.rst index f42a2ac309c0..f42a2ac309c0 100644 --- a/Documentation/arm/stm32/stm32mp151-overview.rst +++ b/Documentation/arch/arm/stm32/stm32mp151-overview.rst diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arch/arm/stm32/stm32mp157-overview.rst index f62fdc8e7d8d..f62fdc8e7d8d 100644 --- a/Documentation/arm/stm32/stm32mp157-overview.rst +++ b/Documentation/arch/arm/stm32/stm32mp157-overview.rst diff --git a/Documentation/arm/sunxi.rst b/Documentation/arch/arm/sunxi.rst index b85d1e2f2d47..b85d1e2f2d47 100644 --- a/Documentation/arm/sunxi.rst +++ b/Documentation/arch/arm/sunxi.rst diff --git a/Documentation/arm/sunxi/clocks.rst b/Documentation/arch/arm/sunxi/clocks.rst index 23bd03f3e21f..23bd03f3e21f 100644 --- a/Documentation/arm/sunxi/clocks.rst +++ b/Documentation/arch/arm/sunxi/clocks.rst diff --git a/Documentation/arm/swp_emulation.rst b/Documentation/arch/arm/swp_emulation.rst index 6a608a9c3715..6a608a9c3715 100644 --- a/Documentation/arm/swp_emulation.rst +++ b/Documentation/arch/arm/swp_emulation.rst diff --git a/Documentation/arm/tcm.rst b/Documentation/arch/arm/tcm.rst index 1dc6c39220f9..1dc6c39220f9 100644 --- a/Documentation/arm/tcm.rst +++ b/Documentation/arch/arm/tcm.rst diff --git a/Documentation/arm/uefi.rst b/Documentation/arch/arm/uefi.rst index baebe688a006..baebe688a006 100644 --- a/Documentation/arm/uefi.rst +++ b/Documentation/arch/arm/uefi.rst diff --git a/Documentation/arm/vfp/release-notes.rst b/Documentation/arch/arm/vfp/release-notes.rst index c6b04937cee3..c6b04937cee3 100644 --- a/Documentation/arm/vfp/release-notes.rst +++ b/Documentation/arch/arm/vfp/release-notes.rst diff --git a/Documentation/arm/vlocks.rst b/Documentation/arch/arm/vlocks.rst index a40a1742110b..a40a1742110b 100644 --- a/Documentation/arm/vlocks.rst +++ b/Documentation/arch/arm/vlocks.rst diff --git a/Documentation/arm64/acpi_object_usage.rst b/Documentation/arch/arm64/acpi_object_usage.rst index 484ef9676653..1da22200fdf8 100644 --- a/Documentation/arm64/acpi_object_usage.rst +++ b/Documentation/arch/arm64/acpi_object_usage.rst @@ -17,16 +17,37 @@ For ACPI on arm64, tables also fall into the following categories: - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT - - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IBFT, - IORT, MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, - STAO, TCPA, TPM2, UEFI, XENV + - Optional: AGDI, BGRT, CEDT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, + HMAT, IBFT, IORT, MCHI, MPAM, MPST, MSCT, NFIT, PMTT, PPTT, RASF, SBST, + SDEI, SLIT, SPMI, SRAT, STAO, TCPA, TPM2, UEFI, XENV - - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT, MSDM, OEMx, - PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT + - Not supported: AEST, APMT, BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT, + MSDM, OEMx, PDTT, PSDT, RAS2, RSDT, SLIC, WAET, WDAT, WDRT, WPBT ====== ======================================================================== Table Usage for ARMv8 Linux ====== ======================================================================== +AEST Signature Reserved (signature == "AEST") + + **Arm Error Source Table** + + This table informs the OS of any error nodes in the system that are + compliant with the Arm RAS architecture. + +AGDI Signature Reserved (signature == "AGDI") + + **Arm Generic diagnostic Dump and Reset Device Interface Table** + + This table describes a non-maskable event, that is used by the platform + firmware, to request the OS to generate a diagnostic dump and reset the device. + +APMT Signature Reserved (signature == "APMT") + + **Arm Performance Monitoring Table** + + This table describes the properties of PMU support implmented by + components in the system. + BERT Section 18.3 (signature == "BERT") **Boot Error Record Table** @@ -47,6 +68,13 @@ BGRT Section 5.2.22 (signature == "BGRT") Optional, not currently supported, with no real use-case for an ARM server. +CEDT Signature Reserved (signature == "CEDT") + + **CXL Early Discovery Table** + + This table allows the OS to discover any CXL Host Bridges and the Host + Bridge registers. + CPEP Section 5.2.18 (signature == "CPEP") **Corrected Platform Error Polling table** @@ -184,6 +212,15 @@ HEST Section 18.3.2 (signature == "HEST") Must be supplied if RAS support is provided by the platform. It is recommended this table be supplied. +HMAT Section 5.2.28 (signature == "HMAT") + + **Heterogeneous Memory Attribute Table** + + This table describes the memory attributes, such as memory side cache + attributes and bandwidth and latency details, related to Memory Proximity + Domains. The OS uses this information to optimize the system memory + configuration. + HPET Signature Reserved (signature == "HPET") **High Precision Event timer Table** @@ -241,6 +278,13 @@ MCHI Signature Reserved (signature == "MCHI") Optional, not currently supported. +MPAM Signature Reserved (signature == "MPAM") + + **Memory Partitioning And Monitoring table** + + This table allows the OS to discover the MPAM controls implemented by + the subsystems. + MPST Section 5.2.21 (signature == "MPST") **Memory Power State Table** @@ -281,18 +325,39 @@ PCCT Section 14.1 (signature == "PCCT) Recommend for use on arm64; use of PCC is recommended when using CPPC to control performance and power for platform processors. +PDTT Section 5.2.29 (signature == "PDTT") + + **Platform Debug Trigger Table** + + This table describes PCC channels used to gather debug logs of + non-architectural features. + + PMTT Section 5.2.21.12 (signature == "PMTT") **Platform Memory Topology Table** Optional, not currently supported. +PPTT Section 5.2.30 (signature == "PPTT") + + **Processor Properties Topology Table** + + This table provides the processor and cache topology. + PSDT Section 5.2.11.3 (signature == "PSDT") **Persistent System Description Table** Obsolete table, will not be supported. +RAS2 Section 5.2.21 (signature == "RAS2") + + **RAS Features 2 table** + + This table provides interfaces for the RAS capabilities implemented in + the platform. + RASF Section 5.2.20 (signature == "RASF") **RAS Feature table** @@ -318,6 +383,12 @@ SBST Section 5.2.14 (signature == "SBST") Optional, not currently supported. +SDEI Signature Reserved (signature == "SDEI") + + **Software Delegated Exception Interface table** + + This table advertises the presence of the SDEI interface. + SLIC Signature Reserved (signature == "SLIC") **Software LIcensing table** diff --git a/Documentation/arm64/amu.rst b/Documentation/arch/arm64/amu.rst index 01f2de2b0450..01f2de2b0450 100644 --- a/Documentation/arm64/amu.rst +++ b/Documentation/arch/arm64/amu.rst diff --git a/Documentation/arm64/arm-acpi.rst b/Documentation/arch/arm64/arm-acpi.rst index 47ecb9930dde..94274a8d84cf 100644 --- a/Documentation/arm64/arm-acpi.rst +++ b/Documentation/arch/arm64/arm-acpi.rst @@ -1,40 +1,41 @@ -===================== -ACPI on ARMv8 Servers -===================== - -ACPI can be used for ARMv8 general purpose servers designed to follow -the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server -Base Boot Requirements) [1] specifications. Please note that the SBBR -can be retrieved simply by visiting [1], but the SBSA is currently only -available to those with an ARM login due to ARM IP licensing concerns. - -The ARMv8 kernel implements the reduced hardware model of ACPI version +=================== +ACPI on Arm systems +=================== + +ACPI can be used for Armv8 and Armv9 systems designed to follow +the BSA (Arm Base System Architecture) [0] and BBR (Arm +Base Boot Requirements) [1] specifications. Both BSA and BBR are publicly +accessible documents. +Arm Servers, in addition to being BSA compliant, comply with a set +of rules defined in SBSA (Server Base System Architecture) [2]. + +The Arm kernel implements the reduced hardware model of ACPI version 5.1 or later. Links to the specification and all external documents it refers to are managed by the UEFI Forum. The specification is available at http://www.uefi.org/specifications and documents referenced by the specification can be found via http://www.uefi.org/acpi. -If an ARMv8 system does not meet the requirements of the SBSA and SBBR, +If an Arm system does not meet the requirements of the BSA and BBR, or cannot be described using the mechanisms defined in the required ACPI specifications, then ACPI may not be a good fit for the hardware. While the documents mentioned above set out the requirements for building -industry-standard ARMv8 servers, they also apply to more than one operating +industry-standard Arm systems, they also apply to more than one operating system. The purpose of this document is to describe the interaction between -ACPI and Linux only, on an ARMv8 system -- that is, what Linux expects of +ACPI and Linux only, on an Arm system -- that is, what Linux expects of ACPI and what ACPI can expect of Linux. -Why ACPI on ARM? +Why ACPI on Arm? ---------------- Before examining the details of the interface between ACPI and Linux, it is useful to understand why ACPI is being used. Several technologies already exist in Linux for describing non-enumerable hardware, after all. In this -section we summarize a blog post [2] from Grant Likely that outlines the -reasoning behind ACPI on ARMv8 servers. Actually, we snitch a good portion +section we summarize a blog post [3] from Grant Likely that outlines the +reasoning behind ACPI on Arm systems. Actually, we snitch a good portion of the summary text almost directly, to be honest. -The short form of the rationale for ACPI on ARM is: +The short form of the rationale for ACPI on Arm is: - ACPI’s byte code (AML) allows the platform to encode hardware behavior, while DT explicitly does not support this. For hardware vendors, being @@ -47,7 +48,7 @@ The short form of the rationale for ACPI on ARM is: - In the enterprise server environment, ACPI has established bindings (such as for RAS) which are currently used in production systems. DT does not. - Such bindings could be defined in DT at some point, but doing so means ARM + Such bindings could be defined in DT at some point, but doing so means Arm and x86 would end up using completely different code paths in both firmware and the kernel. @@ -108,7 +109,7 @@ recent version of the kernel. Relationship with Device Tree ----------------------------- -ACPI support in drivers and subsystems for ARMv8 should never be mutually +ACPI support in drivers and subsystems for Arm should never be mutually exclusive with DT support at compile time. At boot time the kernel will only use one description method depending on @@ -121,11 +122,11 @@ time). Booting using ACPI tables ------------------------- -The only defined method for passing ACPI tables to the kernel on ARMv8 +The only defined method for passing ACPI tables to the kernel on Arm is via the UEFI system configuration table. Just so it is explicit, this means that ACPI is only supported on platforms that boot via UEFI. -When an ARMv8 system boots, it can either have DT information, ACPI tables, +When an Arm system boots, it can either have DT information, ACPI tables, or in some very unusual cases, both. If no command line parameters are used, the kernel will try to use DT for device enumeration; if there is no DT present, the kernel will try to use ACPI tables, but only if they are present. @@ -169,7 +170,7 @@ hardware reduced mode must be set to zero. For the ACPI core to operate properly, and in turn provide the information the kernel needs to configure devices, it expects to find the following -tables (all section numbers refer to the ACPI 6.1 specification): +tables (all section numbers refer to the ACPI 6.5 specification): - RSDP (Root System Description Pointer), section 5.2.5 @@ -184,20 +185,76 @@ tables (all section numbers refer to the ACPI 6.1 specification): - GTDT (Generic Timer Description Table), section 5.2.24 + - PPTT (Processor Properties Topology Table), section 5.2.30 + + - DBG2 (DeBuG port table 2), section 5.2.6, specifically Table 5-6. + + - APMT (Arm Performance Monitoring unit Table), section 5.2.6, specifically Table 5-6. + + - AGDI (Arm Generic diagnostic Dump and Reset Device Interface Table), section 5.2.6, specifically Table 5-6. + - If PCI is supported, the MCFG (Memory mapped ConFiGuration - Table), section 5.2.6, specifically Table 5-31. + Table), section 5.2.6, specifically Table 5-6. - If booting without a console=<device> kernel parameter is supported, the SPCR (Serial Port Console Redirection table), - section 5.2.6, specifically Table 5-31. + section 5.2.6, specifically Table 5-6. - If necessary to describe the I/O topology, SMMUs and GIC ITSs, the IORT (Input Output Remapping Table, section 5.2.6, specifically - Table 5-31). + Table 5-6). + + - If NUMA is supported, the following tables are required: + + - SRAT (System Resource Affinity Table), section 5.2.16 + + - SLIT (System Locality distance Information Table), section 5.2.17 + + - If NUMA is supported, and the system contains heterogeneous memory, + the HMAT (Heterogeneous Memory Attribute Table), section 5.2.28. + + - If the ACPI Platform Error Interfaces are required, the following + tables are conditionally required: + + - BERT (Boot Error Record Table, section 18.3.1) + + - EINJ (Error INJection table, section 18.6.1) + + - ERST (Error Record Serialization Table, section 18.5) + + - HEST (Hardware Error Source Table, section 18.3.2) + + - SDEI (Software Delegated Exception Interface table, section 5.2.6, + specifically Table 5-6) + + - AEST (Arm Error Source Table, section 5.2.6, + specifically Table 5-6) + + - RAS2 (ACPI RAS2 feature table, section 5.2.21) + + - If the system contains controllers using PCC channel, the + PCCT (Platform Communications Channel Table), section 14.1 + + - If the system contains a controller to capture board-level system state, + and communicates with the host via PCC, the PDTT (Platform Debug Trigger + Table), section 5.2.29. + + - If NVDIMM is supported, the NFIT (NVDIMM Firmware Interface Table), section 5.2.26 + + - If video framebuffer is present, the BGRT (Boot Graphics Resource Table), section 5.2.23 + + - If IPMI is implemented, the SPMI (Server Platform Management Interface), + section 5.2.6, specifically Table 5-6. + + - If the system contains a CXL Host Bridge, the CEDT (CXL Early Discovery + Table), section 5.2.6, specifically Table 5-6. + + - If the system supports MPAM, the MPAM (Memory Partitioning And Monitoring table), section 5.2.6, + specifically Table 5-6. + + - If the system lacks persistent storage, the IBFT (ISCSI Boot Firmware + Table), section 5.2.6, specifically Table 5-6. - - If NUMA is supported, the SRAT (System Resource Affinity Table) - and SLIT (System Locality distance Information Table), sections - 5.2.16 and 5.2.17, respectively. If the above tables are not all present, the kernel may or may not be able to boot properly since it may not be able to configure all of the @@ -269,16 +326,14 @@ Drivers should look for device properties in the _DSD object ONLY; the _DSD object is described in the ACPI specification section 6.2.5, but this only describes how to define the structure of an object returned via _DSD, and how specific data structures are defined by specific UUIDs. Linux should -only use the _DSD Device Properties UUID [5]: +only use the _DSD Device Properties UUID [4]: - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 - - https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf - -The UEFI Forum provides a mechanism for registering device properties [4] -so that they may be used across all operating systems supporting ACPI. -Device properties that have not been registered with the UEFI Forum should -not be used. +Common device properties can be registered by creating a pull request to [4] so +that they may be used across all operating systems supporting ACPI. +Device properties that have not been registered with the UEFI Forum can be used +but not as "uefi-" common properties. Before creating new device properties, check to be sure that they have not been defined before and either registered in the Linux kernel documentation @@ -306,7 +361,7 @@ process. Once registration and review have been completed, the kernel provides an interface for looking up device properties in a manner independent of -whether DT or ACPI is being used. This API should be used [6]; it can +whether DT or ACPI is being used. This API should be used [5]; it can eliminate some duplication of code paths in driver probing functions and discourage divergence between DT bindings and ACPI device properties. @@ -448,15 +503,15 @@ ASWG ---- The ACPI specification changes regularly. During the year 2014, for instance, version 5.1 was released and version 6.0 substantially completed, with most of -the changes being driven by ARM-specific requirements. Proposed changes are +the changes being driven by Arm-specific requirements. Proposed changes are presented and discussed in the ASWG (ACPI Specification Working Group) which is a part of the UEFI Forum. The current version of the ACPI specification -is 6.1 release in January 2016. +is 6.5 release in August 2022. Participation in this group is open to all UEFI members. Please see http://www.uefi.org/workinggroup for details on group membership. -It is the intent of the ARMv8 ACPI kernel code to follow the ACPI specification +It is the intent of the Arm ACPI kernel code to follow the ACPI specification as closely as possible, and to only implement functionality that complies with the released standards from UEFI ASWG. As a practical matter, there will be vendors that provide bad ACPI tables or violate the standards in some way. @@ -470,12 +525,12 @@ likely be willing to assist in submitting ECRs. Linux Code ---------- -Individual items specific to Linux on ARM, contained in the Linux +Individual items specific to Linux on Arm, contained in the Linux source code, are in the list that follows: ACPI_OS_NAME This macro defines the string to be returned when - an ACPI method invokes the _OS method. On ARM64 + an ACPI method invokes the _OS method. On Arm systems, this macro will be "Linux" by default. The command line parameter acpi_os=<string> can be used to set it to some other value. The @@ -485,36 +540,28 @@ ACPI_OS_NAME ACPI Objects ------------ Detailed expectations for ACPI tables and object are listed in the file -Documentation/arm64/acpi_object_usage.rst. +Documentation/arch/arm64/acpi_object_usage.rst. References ---------- -[0] http://silver.arm.com - document ARM-DEN-0029, or newer: - "Server Base System Architecture", version 2.3, dated 27 Mar 2014 +[0] https://developer.arm.com/documentation/den0094/latest + document Arm-DEN-0094: "Arm Base System Architecture", version 1.0C, dated 6 Oct 2022 + +[1] https://developer.arm.com/documentation/den0044/latest + Document Arm-DEN-0044: "Arm Base Boot Requirements", version 2.0G, dated 15 Apr 2022 -[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0044a/Server_Base_Boot_Requirements.pdf - Document ARM-DEN-0044A, or newer: "Server Base Boot Requirements, System - Software on ARM Platforms", dated 16 Aug 2014 +[2] https://developer.arm.com/documentation/den0029/latest + Document Arm-DEN-0029: "Arm Server Base System Architecture", version 7.1, dated 06 Oct 2022 -[2] http://www.secretlab.ca/archives/151, +[3] http://www.secretlab.ca/archives/151, 10 Jan 2015, Copyright (c) 2015, Linaro Ltd., written by Grant Likely. -[3] AMD ACPI for Seattle platform documentation - http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf - - -[4] http://www.uefi.org/acpi - please see the link for the "ACPI _DSD Device - Property Registry Instructions" - -[5] http://www.uefi.org/acpi - please see the link for the "_DSD (Device - Specific Data) Implementation Guide" +[4] _DSD (Device Specific Data) Implementation Guide + https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf -[6] Kernel code for the unified device +[5] Kernel code for the unified device property interface can be found in include/linux/property.h and drivers/base/property.c. diff --git a/Documentation/arm64/asymmetric-32bit.rst b/Documentation/arch/arm64/asymmetric-32bit.rst index 64a0b505da7d..64a0b505da7d 100644 --- a/Documentation/arm64/asymmetric-32bit.rst +++ b/Documentation/arch/arm64/asymmetric-32bit.rst diff --git a/Documentation/arm64/booting.rst b/Documentation/arch/arm64/booting.rst index ffeccdd6bdac..b57776a68f15 100644 --- a/Documentation/arm64/booting.rst +++ b/Documentation/arch/arm64/booting.rst @@ -379,6 +379,38 @@ Before jumping into the kernel, the following conditions must be met: - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1. + For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS): + + - If the kernel is entered at EL1 and EL2 is present: + + - HCRX_EL2.MSCEn (bit 11) must be initialised to 0b1. + + For CPUs with the Extended Translation Control Register feature (FEAT_TCR2): + + - If EL3 is present: + + - SCR_EL3.TCR2En (bit 43) must be initialised to 0b1. + + - If the kernel is entered at EL1 and EL2 is present: + + - HCRX_EL2.TCR2En (bit 14) must be initialised to 0b1. + + For CPUs with the Stage 1 Permission Indirection Extension feature (FEAT_S1PIE): + + - If EL3 is present: + + - SCR_EL3.PIEn (bit 45) must be initialised to 0b1. + + - If the kernel is entered at EL1 and EL2 is present: + + - HFGRTR_EL2.nPIR_EL1 (bit 58) must be initialised to 0b1. + + - HFGWTR_EL2.nPIR_EL1 (bit 58) must be initialised to 0b1. + + - HFGRTR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1. + + - HFGRWR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1. + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must enter the kernel in the same exception level. Where the values documented diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arch/arm64/cpu-feature-registers.rst index c7adc7897df6..4e4625f2455f 100644 --- a/Documentation/arm64/cpu-feature-registers.rst +++ b/Documentation/arch/arm64/cpu-feature-registers.rst @@ -288,6 +288,8 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | MOPS | [19-16] | y | + +------------------------------+---------+---------+ | RPRES | [7-4] | y | +------------------------------+---------+---------+ | WFXT | [3-0] | y | diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index 83e57e4d38e2..8c8addb4194c 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -102,7 +102,7 @@ HWCAP_ASIMDHP HWCAP_CPUID EL0 access to certain ID registers is available, to the extent - described by Documentation/arm64/cpu-feature-registers.rst. + described by Documentation/arch/arm64/cpu-feature-registers.rst. These ID registers may imply the availability of features. @@ -163,12 +163,12 @@ HWCAP_SB HWCAP_PACA Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or ID_AA64ISAR1_EL1.API == 0b0001, as described by - Documentation/arm64/pointer-authentication.rst. + Documentation/arch/arm64/pointer-authentication.rst. HWCAP_PACG Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or ID_AA64ISAR1_EL1.GPI == 0b0001, as described by - Documentation/arm64/pointer-authentication.rst. + Documentation/arch/arm64/pointer-authentication.rst. HWCAP2_DCPODP Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010. @@ -226,7 +226,7 @@ HWCAP2_BTI HWCAP2_MTE Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described - by Documentation/arm64/memory-tagging-extension.rst. + by Documentation/arch/arm64/memory-tagging-extension.rst. HWCAP2_ECV Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001. @@ -239,11 +239,11 @@ HWCAP2_RPRES HWCAP2_MTE3 Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0011, as described - by Documentation/arm64/memory-tagging-extension.rst. + by Documentation/arch/arm64/memory-tagging-extension.rst. HWCAP2_SME Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described - by Documentation/arm64/sme.rst. + by Documentation/arch/arm64/sme.rst. HWCAP2_SME_I16I64 Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111. @@ -302,6 +302,9 @@ HWCAP2_SMEB16B16 HWCAP2_SMEF16F16 Functionality implied by ID_AA64SMFR0_EL1.F16F16 == 0b1 +HWCAP2_MOPS + Functionality implied by ID_AA64ISAR2_EL1.MOPS == 0b0001. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arm64/features.rst b/Documentation/arch/arm64/features.rst index dfa4cb3cd3ef..dfa4cb3cd3ef 100644 --- a/Documentation/arm64/features.rst +++ b/Documentation/arch/arm64/features.rst diff --git a/Documentation/arm64/hugetlbpage.rst b/Documentation/arch/arm64/hugetlbpage.rst index a110124c11e3..a110124c11e3 100644 --- a/Documentation/arm64/hugetlbpage.rst +++ b/Documentation/arch/arm64/hugetlbpage.rst diff --git a/Documentation/arm64/index.rst b/Documentation/arch/arm64/index.rst index ae21f8118830..d08e924204bf 100644 --- a/Documentation/arm64/index.rst +++ b/Documentation/arch/arm64/index.rst @@ -15,11 +15,13 @@ ARM64 Architecture cpu-feature-registers elf_hwcaps hugetlbpage + kdump legacy_instructions memory memory-tagging-extension perf pointer-authentication + ptdump silicon-errata sme sve diff --git a/Documentation/arm64/kasan-offsets.sh b/Documentation/arch/arm64/kasan-offsets.sh index 2dc5f9e18039..2dc5f9e18039 100644 --- a/Documentation/arm64/kasan-offsets.sh +++ b/Documentation/arch/arm64/kasan-offsets.sh diff --git a/Documentation/arch/arm64/kdump.rst b/Documentation/arch/arm64/kdump.rst new file mode 100644 index 000000000000..56a89f45df28 --- /dev/null +++ b/Documentation/arch/arm64/kdump.rst @@ -0,0 +1,92 @@ +======================================= +crashkernel memory reservation on arm64 +======================================= + +Author: Baoquan He <bhe@redhat.com> + +Kdump mechanism is used to capture a corrupted kernel vmcore so that +it can be subsequently analyzed. In order to do this, a preliminarily +reserved memory is needed to pre-load the kdump kernel and boot such +kernel if corruption happens. + +That reserved memory for kdump is adapted to be able to minimally +accommodate the kdump kernel and the user space programs needed for the +vmcore collection. + +Kernel parameter +================ + +Through the kernel parameters below, memory can be reserved accordingly +during the early stage of the first kernel booting so that a continuous +large chunk of memomy can be found. The low memory reservation needs to +be considered if the crashkernel is reserved from the high memory area. + +- crashkernel=size@offset +- crashkernel=size +- crashkernel=size,high crashkernel=size,low + +Low memory and high memory +========================== + +For kdump reservations, low memory is the memory area under a specific +limit, usually decided by the accessible address bits of the DMA-capable +devices needed by the kdump kernel to run. Those devices not related to +vmcore dumping can be ignored. On arm64, the low memory upper bound is +not fixed: it is 1G on the RPi4 platform but 4G on most other systems. +On special kernels built with CONFIG_ZONE_(DMA|DMA32) disabled, the +whole system RAM is low memory. Outside of the low memory described +above, the rest of system RAM is considered high memory. + +Implementation +============== + +1) crashkernel=size@offset +-------------------------- + +The crashkernel memory must be reserved at the user-specified region or +fail if already occupied. + + +2) crashkernel=size +------------------- + +The crashkernel memory region will be reserved in any available position +according to the search order: + +Firstly, the kernel searches the low memory area for an available region +with the specified size. + +If searching for low memory fails, the kernel falls back to searching +the high memory area for an available region of the specified size. If +the reservation in high memory succeeds, a default size reservation in +the low memory will be done. Currently the default size is 128M, +sufficient for the low memory needs of the kdump kernel. + +Note: crashkernel=size is the recommended option for crashkernel kernel +reservations. The user would not need to know the system memory layout +for a specific platform. + +3) crashkernel=size,high crashkernel=size,low +--------------------------------------------- + +crashkernel=size,(high|low) are an important supplement to +crashkernel=size. They allows the user to specify how much memory needs +to be allocated from the high memory and low memory respectively. On +many systems the low memory is precious and crashkernel reservations +from this area should be kept to a minimum. + +To reserve memory for crashkernel=size,high, searching is first +attempted from the high memory region. If the reservation succeeds, the +low memory reservation will be done subsequently. + +If reservation from the high memory failed, the kernel falls back to +searching the low memory with the specified size in crashkernel=,high. +If it succeeds, no further reservation for low memory is needed. + +Notes: + +- If crashkernel=,low is not specified, the default low memory + reservation will be done automatically. + +- if crashkernel=0,low is specified, it means that the low memory + reservation is omitted intentionally. diff --git a/Documentation/arm64/legacy_instructions.rst b/Documentation/arch/arm64/legacy_instructions.rst index 54401b22cb8f..54401b22cb8f 100644 --- a/Documentation/arm64/legacy_instructions.rst +++ b/Documentation/arch/arm64/legacy_instructions.rst diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arch/arm64/memory-tagging-extension.rst index dbae47bba25e..679725030731 100644 --- a/Documentation/arm64/memory-tagging-extension.rst +++ b/Documentation/arch/arm64/memory-tagging-extension.rst @@ -221,7 +221,7 @@ programs should not retry in case of a non-zero system call return. ``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged address ABI control and MTE configuration of a process as per the ``prctl()`` options described in -Documentation/arm64/tagged-address-abi.rst and above. The corresponding +Documentation/arch/arm64/tagged-address-abi.rst and above. The corresponding ``regset`` is 1 element of 8 bytes (``sizeof(long))``). Core dump support diff --git a/Documentation/arm64/memory.rst b/Documentation/arch/arm64/memory.rst index 2a641ba7be3b..55a55f30eed8 100644 --- a/Documentation/arm64/memory.rst +++ b/Documentation/arch/arm64/memory.rst @@ -33,8 +33,8 @@ AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit):: 0000000000000000 0000ffffffffffff 256TB user ffff000000000000 ffff7fffffffffff 128TB kernel logical memory map [ffff600000000000 ffff7fffffffffff] 32TB [kasan shadow region] - ffff800000000000 ffff800007ffffff 128MB modules - ffff800008000000 fffffbffefffffff 124TB vmalloc + ffff800000000000 ffff80007fffffff 2GB modules + ffff800080000000 fffffbffefffffff 124TB vmalloc fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down) fffffbfffe000000 fffffbfffe7fffff 8MB [guard region] fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space @@ -50,8 +50,8 @@ AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support): 0000000000000000 000fffffffffffff 4PB user fff0000000000000 ffff7fffffffffff ~4PB kernel logical memory map [fffd800000000000 ffff7fffffffffff] 512TB [kasan shadow region] - ffff800000000000 ffff800007ffffff 128MB modules - ffff800008000000 fffffbffefffffff 124TB vmalloc + ffff800000000000 ffff80007fffffff 2GB modules + ffff800080000000 fffffbffefffffff 124TB vmalloc fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down) fffffbfffe000000 fffffbfffe7fffff 8MB [guard region] fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space diff --git a/Documentation/arm64/perf.rst b/Documentation/arch/arm64/perf.rst index 1f87b57c2332..1f87b57c2332 100644 --- a/Documentation/arm64/perf.rst +++ b/Documentation/arch/arm64/perf.rst diff --git a/Documentation/arm64/pointer-authentication.rst b/Documentation/arch/arm64/pointer-authentication.rst index e5dad2e40aa8..e5dad2e40aa8 100644 --- a/Documentation/arm64/pointer-authentication.rst +++ b/Documentation/arch/arm64/pointer-authentication.rst diff --git a/Documentation/arch/arm64/ptdump.rst b/Documentation/arch/arm64/ptdump.rst new file mode 100644 index 000000000000..5dcfc5d7cddf --- /dev/null +++ b/Documentation/arch/arm64/ptdump.rst @@ -0,0 +1,96 @@ +====================== +Kernel page table dump +====================== + +ptdump is a debugfs interface that provides a detailed dump of the +kernel page tables. It offers a comprehensive overview of the kernel +virtual memory layout as well as the attributes associated with the +various regions in a human-readable format. It is useful to dump the +kernel page tables to verify permissions and memory types. Examining the +page table entries and permissions helps identify potential security +vulnerabilities such as mappings with overly permissive access rights or +improper memory protections. + +Memory hotplug allows dynamic expansion or contraction of available +memory without requiring a system reboot. To maintain the consistency +and integrity of the memory management data structures, arm64 makes use +of the ``mem_hotplug_lock`` semaphore in write mode. Additionally, in +read mode, ``mem_hotplug_lock`` supports an efficient implementation of +``get_online_mems()`` and ``put_online_mems()``. These protect the +offlining of memory being accessed by the ptdump code. + +In order to dump the kernel page tables, enable the following +configurations and mount debugfs:: + + CONFIG_GENERIC_PTDUMP=y + CONFIG_PTDUMP_CORE=y + CONFIG_PTDUMP_DEBUGFS=y + + mount -t debugfs nodev /sys/kernel/debug + cat /sys/kernel/debug/kernel_page_tables + +On analysing the output of ``cat /sys/kernel/debug/kernel_page_tables`` +one can derive information about the virtual address range of the entry, +followed by size of the memory region covered by this entry, the +hierarchical structure of the page tables and finally the attributes +associated with each page. The page attributes provide information about +access permissions, execution capability, type of mapping such as leaf +level PTE or block level PGD, PMD and PUD, and access status of a page +within the kernel memory. Assessing these attributes can assist in +understanding the memory layout, access patterns and security +characteristics of the kernel pages. + +Kernel virtual memory layout example:: + + start address end address size attributes + +---------------------------------------------------------------------------------------+ + | ---[ Linear Mapping start ]---------------------------------------------------------- | + | .................. | + | 0xfff0000000000000-0xfff0000000210000 2112K PTE RW NX SHD AF UXN MEM/NORMAL-TAGGED | + | 0xfff0000000210000-0xfff0000001c00000 26560K PTE ro NX SHD AF UXN MEM/NORMAL | + | .................. | + | ---[ Linear Mapping end ]------------------------------------------------------------ | + +---------------------------------------------------------------------------------------+ + | ---[ Modules start ]----------------------------------------------------------------- | + | .................. | + | 0xffff800000000000-0xffff800008000000 128M PTE | + | .................. | + | ---[ Modules end ]------------------------------------------------------------------- | + +---------------------------------------------------------------------------------------+ + | ---[ vmalloc() area ]---------------------------------------------------------------- | + | .................. | + | 0xffff800008010000-0xffff800008200000 1984K PTE ro x SHD AF UXN MEM/NORMAL | + | 0xffff800008200000-0xffff800008e00000 12M PTE ro x SHD AF CON UXN MEM/NORMAL | + | .................. | + | ---[ vmalloc() end ]----------------------------------------------------------------- | + +---------------------------------------------------------------------------------------+ + | ---[ Fixmap start ]------------------------------------------------------------------ | + | .................. | + | 0xfffffbfffdb80000-0xfffffbfffdb90000 64K PTE ro x SHD AF UXN MEM/NORMAL | + | 0xfffffbfffdb90000-0xfffffbfffdba0000 64K PTE ro NX SHD AF UXN MEM/NORMAL | + | .................. | + | ---[ Fixmap end ]-------------------------------------------------------------------- | + +---------------------------------------------------------------------------------------+ + | ---[ PCI I/O start ]----------------------------------------------------------------- | + | .................. | + | 0xfffffbfffe800000-0xfffffbffff800000 16M PTE | + | .................. | + | ---[ PCI I/O end ]------------------------------------------------------------------- | + +---------------------------------------------------------------------------------------+ + | ---[ vmemmap start ]----------------------------------------------------------------- | + | .................. | + | 0xfffffc0002000000-0xfffffc0002200000 2M PTE RW NX SHD AF UXN MEM/NORMAL | + | 0xfffffc0002200000-0xfffffc0020000000 478M PTE | + | .................. | + | ---[ vmemmap end ]------------------------------------------------------------------- | + +---------------------------------------------------------------------------------------+ + +``cat /sys/kernel/debug/kernel_page_tables`` output:: + + 0xfff0000001c00000-0xfff0000080000000 2020M PTE RW NX SHD AF UXN MEM/NORMAL-TAGGED + 0xfff0000080000000-0xfff0000800000000 30G PMD + 0xfff0000800000000-0xfff0000800700000 7M PTE RW NX SHD AF UXN MEM/NORMAL-TAGGED + 0xfff0000800700000-0xfff0000800710000 64K PTE ro NX SHD AF UXN MEM/NORMAL-TAGGED + 0xfff0000800710000-0xfff0000880000000 2089920K PTE RW NX SHD AF UXN MEM/NORMAL-TAGGED + 0xfff0000880000000-0xfff0040000000000 4062G PMD + 0xfff0040000000000-0xffff800000000000 3964T PGD diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index 9e311bc43e05..496cdca5cb99 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -52,6 +52,9 @@ stable kernels. | Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| Ampere | AmpereOne | AC03_CPU_38 | AMPERE_ERRATUM_AC03_CPU_38 | ++----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2457168 | ARM64_ERRATUM_2457168 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2064142 | ARM64_ERRATUM_2064142 | @@ -140,6 +143,10 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | MMU-500 | #841119,826419 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | MMU-600 | #1076982,1209401| N/A | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | MMU-700 | #2268618,2812531| N/A | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 | +----------------+-----------------+-----------------+-----------------------------+ @@ -214,3 +221,7 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Fujitsu | A64FX | E#010001 | FUJITSU_ERRATUM_010001 | +----------------+-----------------+-----------------+-----------------------------+ + ++----------------+-----------------+-----------------+-----------------------------+ +| ASR | ASR8601 | #8601001 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/arm64/sme.rst b/Documentation/arch/arm64/sme.rst index 1c43ea12eb4f..ba529a1dc606 100644 --- a/Documentation/arm64/sme.rst +++ b/Documentation/arch/arm64/sme.rst @@ -465,4 +465,4 @@ References [2] arch/arm64/include/uapi/asm/ptrace.h AArch64 Linux ptrace ABI definitions -[3] Documentation/arm64/cpu-feature-registers.rst +[3] Documentation/arch/arm64/cpu-feature-registers.rst diff --git a/Documentation/arm64/sve.rst b/Documentation/arch/arm64/sve.rst index 1b90a30382ac..0d9a426e9f85 100644 --- a/Documentation/arm64/sve.rst +++ b/Documentation/arch/arm64/sve.rst @@ -606,7 +606,7 @@ References [2] arch/arm64/include/uapi/asm/ptrace.h AArch64 Linux ptrace ABI definitions -[3] Documentation/arm64/cpu-feature-registers.rst +[3] Documentation/arch/arm64/cpu-feature-registers.rst [4] ARM IHI0055C http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arch/arm64/tagged-address-abi.rst index 540a1d4fc6c9..fe24a3f158c5 100644 --- a/Documentation/arm64/tagged-address-abi.rst +++ b/Documentation/arch/arm64/tagged-address-abi.rst @@ -107,7 +107,7 @@ following behaviours are guaranteed: A definition of the meaning of tagged pointers on AArch64 can be found -in Documentation/arm64/tagged-pointers.rst. +in Documentation/arch/arm64/tagged-pointers.rst. 3. AArch64 Tagged Address ABI Exceptions ----------------------------------------- diff --git a/Documentation/arm64/tagged-pointers.rst b/Documentation/arch/arm64/tagged-pointers.rst index 19d284b70384..81b6c2a770dd 100644 --- a/Documentation/arm64/tagged-pointers.rst +++ b/Documentation/arch/arm64/tagged-pointers.rst @@ -22,7 +22,7 @@ Passing tagged addresses to the kernel All interpretation of userspace memory addresses by the kernel assumes an address tag of 0x00, unless the application enables the AArch64 Tagged Address ABI explicitly -(Documentation/arm64/tagged-address-abi.rst). +(Documentation/arch/arm64/tagged-address-abi.rst). This includes, but is not limited to, addresses found in: diff --git a/Documentation/arch/index.rst b/Documentation/arch/index.rst index 80ee31016584..8458b88e9b79 100644 --- a/Documentation/arch/index.rst +++ b/Documentation/arch/index.rst @@ -10,8 +10,8 @@ implementation. :maxdepth: 2 arc/index - ../arm/index - ../arm64/index + arm/index + arm64/index ia64/index ../loongarch/index m68k/index diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst index 387ccbcb558f..cb05d90111b4 100644 --- a/Documentation/arch/x86/resctrl.rst +++ b/Documentation/arch/x86/resctrl.rst @@ -287,6 +287,13 @@ Removing a directory will move all tasks and cpus owned by the group it represents to the parent. Removing one of the created CTRL_MON groups will automatically remove all MON groups below it. +Moving MON group directories to a new parent CTRL_MON group is supported +for the purpose of changing the resource allocations of a MON group +without impacting its monitoring data or assigned tasks. This operation +is not allowed for MON groups which monitor CPUs. No other move +operation is currently allowed other than simply renaming a CTRL_MON or +MON group. + All groups contain the following files: "tasks": diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst index 102953166429..9fea696f9daa 100644 --- a/Documentation/block/index.rst +++ b/Documentation/block/index.rst @@ -18,7 +18,6 @@ Block kyber-iosched null_blk pr - request stat switching-sched writeback_cache_control diff --git a/Documentation/block/request.rst b/Documentation/block/request.rst deleted file mode 100644 index 747021e1ffdb..000000000000 --- a/Documentation/block/request.rst +++ /dev/null @@ -1,99 +0,0 @@ -============================ -struct request documentation -============================ - -Jens Axboe <jens.axboe@oracle.com> 27/05/02 - - -.. FIXME: - No idea about what does mean - seems just some noise, so comment it - - 1.0 - Index - - 2.0 Struct request members classification - - 2.1 struct request members explanation - - 3.0 - - - 2.0 - - - -Short explanation of request members -==================================== - -Classification flags: - - = ==================== - D driver member - B block layer member - I I/O scheduler member - = ==================== - -Unless an entry contains a D classification, a device driver must not access -this member. Some members may contain D classifications, but should only be -access through certain macros or functions (eg ->flags). - -<linux/blkdev.h> - -=============================== ======= ======================================= -Member Flag Comment -=============================== ======= ======================================= -struct list_head queuelist BI Organization on various internal - queues - -``void *elevator_private`` I I/O scheduler private data - -unsigned char cmd[16] D Driver can use this for setting up - a cdb before execution, see - blk_queue_prep_rq - -unsigned long flags DBI Contains info about data direction, - request type, etc. - -int rq_status D Request status bits - -kdev_t rq_dev DBI Target device - -int errors DB Error counts - -sector_t sector DBI Target location - -unsigned long hard_nr_sectors B Used to keep sector sane - -unsigned long nr_sectors DBI Total number of sectors in request - -unsigned long hard_nr_sectors B Used to keep nr_sectors sane - -unsigned short nr_phys_segments DB Number of physical scatter gather - segments in a request - -unsigned short nr_hw_segments DB Number of hardware scatter gather - segments in a request - -unsigned int current_nr_sectors DB Number of sectors in first segment - of request - -unsigned int hard_cur_sectors B Used to keep current_nr_sectors sane - -int tag DB TCQ tag, if assigned - -``void *special`` D Free to be used by driver - -``char *buffer`` D Map of first segment, also see - section on bouncing SECTION - -``struct completion *waiting`` D Can be used by driver to get signalled - on request completion - -``struct bio *bio`` DBI First bio in request - -``struct bio *biotail`` DBI Last bio in request - -``struct request_queue *q`` DB Request queue this request belongs to - -``struct request_list *rl`` B Request list this request came from -=============================== ======= ======================================= diff --git a/Documentation/bpf/bpf_iterators.rst b/Documentation/bpf/bpf_iterators.rst index 6d7770793fab..07433915aa41 100644 --- a/Documentation/bpf/bpf_iterators.rst +++ b/Documentation/bpf/bpf_iterators.rst @@ -238,11 +238,8 @@ The following is the breakdown for each field in struct ``bpf_iter_reg``. that the kernel function cond_resched() is called to avoid other kernel subsystem (e.g., rcu) misbehaving. * - seq_info - - Specifies certain action requests in the kernel BPF iterator - infrastructure. Currently, only BPF_ITER_RESCHED is supported. This means - that the kernel function cond_resched() is called to avoid other kernel - subsystem (e.g., rcu) misbehaving. - + - Specifies the set of seq operations for the BPF iterator and helpers to + initialize/free the private data for the corresponding ``seq_file``. `Click here <https://lore.kernel.org/bpf/20210212183107.50963-2-songliubraving@fb.com/>`_ diff --git a/Documentation/bpf/cpumasks.rst b/Documentation/bpf/cpumasks.rst index 41efd8874eeb..3139c7c02e79 100644 --- a/Documentation/bpf/cpumasks.rst +++ b/Documentation/bpf/cpumasks.rst @@ -351,14 +351,15 @@ In addition to the above kfuncs, there is also a set of read-only kfuncs that can be used to query the contents of cpumasks. .. kernel-doc:: kernel/bpf/cpumask.c - :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_test_cpu + :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_first_and + bpf_cpumask_test_cpu .. kernel-doc:: kernel/bpf/cpumask.c :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset bpf_cpumask_empty bpf_cpumask_full .. kernel-doc:: kernel/bpf/cpumask.c - :identifiers: bpf_cpumask_any bpf_cpumask_any_and + :identifiers: bpf_cpumask_any_distribute bpf_cpumask_any_and_distribute ---- diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst index 492980ece1ab..6644842cd3ea 100644 --- a/Documentation/bpf/instruction-set.rst +++ b/Documentation/bpf/instruction-set.rst @@ -163,13 +163,13 @@ BPF_MUL 0x20 dst \*= src BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0 BPF_OR 0x40 dst \|= src BPF_AND 0x50 dst &= src -BPF_LSH 0x60 dst <<= src -BPF_RSH 0x70 dst >>= src +BPF_LSH 0x60 dst <<= (src & mask) +BPF_RSH 0x70 dst >>= (src & mask) BPF_NEG 0x80 dst = ~src BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst BPF_XOR 0xa0 dst ^= src BPF_MOV 0xb0 dst = src -BPF_ARSH 0xc0 sign extending shift right +BPF_ARSH 0xc0 sign extending dst >>= (src & mask) BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below) ======== ===== ========================================================== @@ -204,6 +204,9 @@ for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result interpreted as an unsigned 64-bit value. There are no instructions for signed division or modulo. +Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31) +for 32-bit operations. + Byte swap instructions ~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst index ea2516374d92..0d2647fb358d 100644 --- a/Documentation/bpf/kfuncs.rst +++ b/Documentation/bpf/kfuncs.rst @@ -100,7 +100,7 @@ Hence, whenever a constant scalar argument is accepted by a kfunc which is not a size parameter, and the value of the constant matters for program safety, __k suffix should be used. -2.2.2 __uninit Annotation +2.2.3 __uninit Annotation ------------------------- This annotation is used to indicate that the argument will be treated as @@ -117,6 +117,27 @@ Here, the dynptr will be treated as an uninitialized dynptr. Without this annotation, the verifier will reject the program if the dynptr passed in is not initialized. +2.2.4 __opt Annotation +------------------------- + +This annotation is used to indicate that the buffer associated with an __sz or __szk +argument may be null. If the function is passed a nullptr in place of the buffer, +the verifier will not check that length is appropriate for the buffer. The kfunc is +responsible for checking if this buffer is null before using it. + +An example is given below:: + + __bpf_kfunc void *bpf_dynptr_slice(..., void *buffer__opt, u32 buffer__szk) + { + ... + } + +Here, the buffer may be null. If buffer is not null, it at least of size buffer_szk. +Either way, the returned buffer is either NULL, or of size buffer_szk. Without this +annotation, the verifier will reject the program if a null pointer is passed in with +a nonzero size. + + .. _BPF_kfunc_nodef: 2.3 Using an existing kernel function @@ -206,23 +227,49 @@ absolutely no ABI stability guarantees. As mentioned above, a nested pointer obtained from walking a trusted pointer is no longer trusted, with one exception. If a struct type has a field that is -guaranteed to be valid as long as its parent pointer is trusted, the -``BTF_TYPE_SAFE_NESTED`` macro can be used to express that to the verifier as -follows: +guaranteed to be valid (trusted or rcu, as in KF_RCU description below) as long +as its parent pointer is valid, the following macros can be used to express +that to the verifier: + +* ``BTF_TYPE_SAFE_TRUSTED`` +* ``BTF_TYPE_SAFE_RCU`` +* ``BTF_TYPE_SAFE_RCU_OR_NULL`` + +For example, + +.. code-block:: c + + BTF_TYPE_SAFE_TRUSTED(struct socket) { + struct sock *sk; + }; + +or .. code-block:: c - BTF_TYPE_SAFE_NESTED(struct task_struct) { + BTF_TYPE_SAFE_RCU(struct task_struct) { const cpumask_t *cpus_ptr; + struct css_set __rcu *cgroups; + struct task_struct __rcu *real_parent; + struct task_struct *group_leader; }; In other words, you must: -1. Wrap the trusted pointer type in the ``BTF_TYPE_SAFE_NESTED`` macro. +1. Wrap the valid pointer type in a ``BTF_TYPE_SAFE_*`` macro. -2. Specify the type and name of the trusted nested field. This field must match +2. Specify the type and name of the valid nested field. This field must match the field in the original type definition exactly. +A new type declared by a ``BTF_TYPE_SAFE_*`` macro also needs to be emitted so +that it appears in BTF. For example, ``BTF_TYPE_SAFE_TRUSTED(struct socket)`` +is emitted in the ``type_is_trusted()`` function as follows: + +.. code-block:: c + + BTF_TYPE_EMIT(BTF_TYPE_SAFE_TRUSTED(struct socket)); + + 2.4.5 KF_SLEEPABLE flag ----------------------- diff --git a/Documentation/bpf/llvm_reloc.rst b/Documentation/bpf/llvm_reloc.rst index ca8957d5b671..e4a777a6a3a2 100644 --- a/Documentation/bpf/llvm_reloc.rst +++ b/Documentation/bpf/llvm_reloc.rst @@ -48,7 +48,7 @@ the code with ``llvm-objdump -dr test.o``:: 14: 0f 10 00 00 00 00 00 00 r0 += r1 15: 95 00 00 00 00 00 00 00 exit -There are four relations in the above for four ``LD_imm64`` instructions. +There are four relocations in the above for four ``LD_imm64`` instructions. The following ``llvm-readelf -r test.o`` shows the binary values of the four relocations:: @@ -79,14 +79,16 @@ The following is the symbol table with ``llvm-readelf -s test.o``:: The 6th entry is global variable ``g1`` with value 0. Similarly, the second relocation is at ``.text`` offset ``0x18``, instruction 3, -for global variable ``g2`` which has a symbol value 4, the offset -from the start of ``.data`` section. - -The third and fourth relocations refers to static variables ``l1`` -and ``l2``. From ``.rel.text`` section above, it is not clear -which symbols they really refers to as they both refers to +has a type of ``R_BPF_64_64`` and refers to entry 7 in the symbol table. +The second relocation resolves to global variable ``g2`` which has a symbol +value 4. The symbol value represents the offset from the start of ``.data`` +section where the initial value of the global variable ``g2`` is stored. + +The third and fourth relocations refer to static variables ``l1`` +and ``l2``. From the ``.rel.text`` section above, it is not clear +to which symbols they really refer as they both refer to symbol table entry 4, symbol ``sec``, which has ``STT_SECTION`` type -and represents a section. So for static variable or function, +and represents a section. So for a static variable or function, the section offset is written to the original insn buffer, which is called ``A`` (addend). Looking at above insn ``7`` and ``11``, they have section offset ``8`` and ``12``. diff --git a/Documentation/bpf/map_hash.rst b/Documentation/bpf/map_hash.rst index 8669426264c6..d2343952f2cb 100644 --- a/Documentation/bpf/map_hash.rst +++ b/Documentation/bpf/map_hash.rst @@ -1,5 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0-only .. Copyright (C) 2022 Red Hat, Inc. +.. Copyright (C) 2022-2023 Isovalent, Inc. =============================================== BPF_MAP_TYPE_HASH, with PERCPU and LRU Variants @@ -29,7 +30,16 @@ will automatically evict the least recently used entries when the hash table reaches capacity. An LRU hash maintains an internal LRU list that is used to select elements for eviction. This internal LRU list is shared across CPUs but it is possible to request a per CPU LRU list with -the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``. +the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``. The +following table outlines the properties of LRU maps depending on the a +map type and the flags used to create the map. + +======================== ========================= ================================ +Flag ``BPF_MAP_TYPE_LRU_HASH`` ``BPF_MAP_TYPE_LRU_PERCPU_HASH`` +======================== ========================= ================================ +**BPF_F_NO_COMMON_LRU** Per-CPU LRU, global map Per-CPU LRU, per-cpu map +**!BPF_F_NO_COMMON_LRU** Global LRU, global map Global LRU, per-cpu map +======================== ========================= ================================ Usage ===== @@ -206,3 +216,44 @@ Userspace walking the map elements from the map declared above: cur_key = &next_key; } } + +Internals +========= + +This section of the document is targeted at Linux developers and describes +aspects of the map implementations that are not considered stable ABI. The +following details are subject to change in future versions of the kernel. + +``BPF_MAP_TYPE_LRU_HASH`` and variants +-------------------------------------- + +Updating elements in LRU maps may trigger eviction behaviour when the capacity +of the map is reached. There are various steps that the update algorithm +attempts in order to enforce the LRU property which have increasing impacts on +other CPUs involved in the following operation attempts: + +- Attempt to use CPU-local state to batch operations +- Attempt to fetch free nodes from global lists +- Attempt to pull any node from a global list and remove it from the hashmap +- Attempt to pull any node from any CPU's list and remove it from the hashmap + +This algorithm is described visually in the following diagram. See the +description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of +the corresponding operations: + +.. kernel-figure:: map_lru_hash_update.dot + :alt: Diagram outlining the LRU eviction steps taken during map update. + + LRU hash eviction during map update for ``BPF_MAP_TYPE_LRU_HASH`` and + variants. See the dot file source for kernel function name code references. + +Map updates start from the oval in the top right "begin ``bpf_map_update()``" +and progress through the graph towards the bottom where the result may be +either a successful update or a failure with various error codes. The key in +the top right provides indicators for which locks may be involved in specific +operations. This is intended as a visual hint for reasoning about how map +contention may impact update operations, though the map type and flags may +impact the actual contention on those locks, based on the logic described in +the table above. For instance, if the map is created with type +``BPF_MAP_TYPE_LRU_PERCPU_HASH`` and flags ``BPF_F_NO_COMMON_LRU`` then all map +properties would be per-cpu. diff --git a/Documentation/bpf/map_lru_hash_update.dot b/Documentation/bpf/map_lru_hash_update.dot new file mode 100644 index 000000000000..a0fee349d29c --- /dev/null +++ b/Documentation/bpf/map_lru_hash_update.dot @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2022-2023 Isovalent, Inc. +digraph { + node [colorscheme=accent4,style=filled] # Apply colorscheme to all nodes + graph [splines=ortho, nodesep=1] + + subgraph cluster_key { + label = "Key\n(locks held during operation)"; + rankdir = TB; + + remote_lock [shape=rectangle,fillcolor=4,label="remote CPU LRU lock"] + hash_lock [shape=rectangle,fillcolor=3,label="hashtab lock"] + lru_lock [shape=rectangle,fillcolor=2,label="LRU lock"] + local_lock [shape=rectangle,fillcolor=1,label="local CPU LRU lock"] + no_lock [shape=rectangle,label="no locks held"] + } + + begin [shape=oval,label="begin\nbpf_map_update()"] + + // Nodes below with an 'fn_' prefix are roughly labeled by the C function + // names that initiate the corresponding logic in kernel/bpf/bpf_lru_list.c. + // Number suffixes and errno suffixes handle subsections of the corresponding + // logic in the function as of the writing of this dot. + + // cf. __local_list_pop_free() / bpf_percpu_lru_pop_free() + local_freelist_check [shape=diamond,fillcolor=1, + label="Local freelist\nnode available?"]; + use_local_node [shape=rectangle, + label="Use node owned\nby this CPU"] + + // cf. bpf_lru_pop_free() + common_lru_check [shape=diamond, + label="Map created with\ncommon LRU?\n(!BPF_F_NO_COMMON_LRU)"]; + + fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2, + label="Flush local pending, + Rotate Global list, move + LOCAL_FREE_TARGET + from global -> local"] + // Also corresponds to: + // fn__local_list_flush() + // fn_bpf_lru_list_rotate() + fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2, + label="Able to free\nLOCAL_FREE_TARGET\nnodes?"] + + fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3, + label="Shrink inactive list + up to remaining + LOCAL_FREE_TARGET + (global LRU -> local)"] + fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2, + label="> 0 entries in\nlocal free list?"] + fn___bpf_lru_list_shrink2 [shape=rectangle,fillcolor=2, + label="Steal one node from + inactive, or if empty, + from active global list"] + fn___bpf_lru_list_shrink3 [shape=rectangle,fillcolor=3, + label="Try to remove\nnode from hashtab"] + + local_freelist_check2 [shape=diamond,label="Htab removal\nsuccessful?"] + common_lru_check2 [shape=diamond, + label="Map created with\ncommon LRU?\n(!BPF_F_NO_COMMON_LRU)"]; + + subgraph cluster_remote_lock { + label = "Iterate through CPUs\n(start from current)"; + style = dashed; + rankdir=LR; + + local_freelist_check5 [shape=diamond,fillcolor=4, + label="Steal a node from\nper-cpu freelist?"] + local_freelist_check6 [shape=rectangle,fillcolor=4, + label="Steal a node from + (1) Unreferenced pending, or + (2) Any pending node"] + local_freelist_check7 [shape=rectangle,fillcolor=3, + label="Try to remove\nnode from hashtab"] + fn_htab_lru_map_update_elem [shape=diamond, + label="Stole node\nfrom remote\nCPU?"] + fn_htab_lru_map_update_elem2 [shape=diamond,label="Iterated\nall CPUs?"] + // Also corresponds to: + // use_local_node() + // fn__local_list_pop_pending() + } + + fn_bpf_lru_list_pop_free_to_local2 [shape=rectangle, + label="Use node that was\nnot recently referenced"] + local_freelist_check4 [shape=rectangle, + label="Use node that was\nactively referenced\nin global list"] + fn_htab_lru_map_update_elem_ENOMEM [shape=oval,label="return -ENOMEM"] + fn_htab_lru_map_update_elem3 [shape=rectangle, + label="Use node that was\nactively referenced\nin (another?) CPU's cache"] + fn_htab_lru_map_update_elem4 [shape=rectangle,fillcolor=3, + label="Update hashmap\nwith new element"] + fn_htab_lru_map_update_elem5 [shape=oval,label="return 0"] + fn_htab_lru_map_update_elem_EBUSY [shape=oval,label="return -EBUSY"] + fn_htab_lru_map_update_elem_EEXIST [shape=oval,label="return -EEXIST"] + fn_htab_lru_map_update_elem_ENOENT [shape=oval,label="return -ENOENT"] + + begin -> local_freelist_check + local_freelist_check -> use_local_node [xlabel="Y"] + local_freelist_check -> common_lru_check [xlabel="N"] + common_lru_check -> fn_bpf_lru_list_pop_free_to_local [xlabel="Y"] + common_lru_check -> fn___bpf_lru_list_shrink_inactive [xlabel="N"] + fn_bpf_lru_list_pop_free_to_local -> fn___bpf_lru_node_move_to_free + fn___bpf_lru_node_move_to_free -> + fn_bpf_lru_list_pop_free_to_local2 [xlabel="Y"] + fn___bpf_lru_node_move_to_free -> + fn___bpf_lru_list_shrink_inactive [xlabel="N"] + fn___bpf_lru_list_shrink_inactive -> fn___bpf_lru_list_shrink + fn___bpf_lru_list_shrink -> fn_bpf_lru_list_pop_free_to_local2 [xlabel = "Y"] + fn___bpf_lru_list_shrink -> fn___bpf_lru_list_shrink2 [xlabel="N"] + fn___bpf_lru_list_shrink2 -> fn___bpf_lru_list_shrink3 + fn___bpf_lru_list_shrink3 -> local_freelist_check2 + local_freelist_check2 -> local_freelist_check4 [xlabel = "Y"] + local_freelist_check2 -> common_lru_check2 [xlabel = "N"] + common_lru_check2 -> local_freelist_check5 [xlabel = "Y"] + common_lru_check2 -> fn_htab_lru_map_update_elem_ENOMEM [xlabel = "N"] + local_freelist_check5 -> fn_htab_lru_map_update_elem [xlabel = "Y"] + local_freelist_check5 -> local_freelist_check6 [xlabel = "N"] + local_freelist_check6 -> local_freelist_check7 + local_freelist_check7 -> fn_htab_lru_map_update_elem + + fn_htab_lru_map_update_elem -> fn_htab_lru_map_update_elem3 [xlabel = "Y"] + fn_htab_lru_map_update_elem -> fn_htab_lru_map_update_elem2 [xlabel = "N"] + fn_htab_lru_map_update_elem2 -> + fn_htab_lru_map_update_elem_ENOMEM [xlabel = "Y"] + fn_htab_lru_map_update_elem2 -> local_freelist_check5 [xlabel = "N"] + fn_htab_lru_map_update_elem3 -> fn_htab_lru_map_update_elem4 + + use_local_node -> fn_htab_lru_map_update_elem4 + fn_bpf_lru_list_pop_free_to_local2 -> fn_htab_lru_map_update_elem4 + local_freelist_check4 -> fn_htab_lru_map_update_elem4 + + fn_htab_lru_map_update_elem4 -> fn_htab_lru_map_update_elem5 [headlabel="Success"] + fn_htab_lru_map_update_elem4 -> + fn_htab_lru_map_update_elem_EBUSY [xlabel="Hashtab lock failed"] + fn_htab_lru_map_update_elem4 -> + fn_htab_lru_map_update_elem_EEXIST [xlabel="BPF_EXIST set and\nkey already exists"] + fn_htab_lru_map_update_elem4 -> + fn_htab_lru_map_update_elem_ENOENT [headlabel="BPF_NOEXIST set\nand no such entry"] + + // Create invisible pad nodes to line up various nodes + pad0 [style=invis] + pad1 [style=invis] + pad2 [style=invis] + pad3 [style=invis] + pad4 [style=invis] + + // Line up the key with the top of the graph + no_lock -> local_lock [style=invis] + local_lock -> lru_lock [style=invis] + lru_lock -> hash_lock [style=invis] + hash_lock -> remote_lock [style=invis] + remote_lock -> local_freelist_check5 [style=invis] + remote_lock -> fn___bpf_lru_list_shrink [style=invis] + + // Line up return code nodes at the bottom of the graph + fn_htab_lru_map_update_elem -> pad0 [style=invis] + pad0 -> pad1 [style=invis] + pad1 -> pad2 [style=invis] + //pad2-> fn_htab_lru_map_update_elem_ENOMEM [style=invis] + fn_htab_lru_map_update_elem4 -> pad3 [style=invis] + pad3 -> fn_htab_lru_map_update_elem5 [style=invis] + pad3 -> fn_htab_lru_map_update_elem_EBUSY [style=invis] + pad3 -> fn_htab_lru_map_update_elem_EEXIST [style=invis] + pad3 -> fn_htab_lru_map_update_elem_ENOENT [style=invis] + + // Reduce diagram width by forcing some nodes to appear above others + local_freelist_check4 -> fn_htab_lru_map_update_elem3 [style=invis] + common_lru_check2 -> pad4 [style=invis] + pad4 -> local_freelist_check5 [style=invis] +} diff --git a/Documentation/bpf/map_sockmap.rst b/Documentation/bpf/map_sockmap.rst index cc92047c6630..2d630686a00b 100644 --- a/Documentation/bpf/map_sockmap.rst +++ b/Documentation/bpf/map_sockmap.rst @@ -240,11 +240,11 @@ offsets into ``msg``, respectively. If a program of type ``BPF_PROG_TYPE_SK_MSG`` is run on a ``msg`` it can only parse data that the (``data``, ``data_end``) pointers have already consumed. For ``sendmsg()`` hooks this is likely the first scatterlist element. But for -calls relying on the ``sendpage`` handler (e.g., ``sendfile()``) this will be -the range (**0**, **0**) because the data is shared with user space and by -default the objective is to avoid allowing user space to modify data while (or -after) BPF verdict is being decided. This helper can be used to pull in data -and to set the start and end pointers to given values. Data will be copied if +calls relying on MSG_SPLICE_PAGES (e.g., ``sendfile()``) this will be the +range (**0**, **0**) because the data is shared with user space and by default +the objective is to avoid allowing user space to modify data while (or after) +BPF verdict is being decided. This helper can be used to pull in data and to +set the start and end pointers to given values. Data will be copied if necessary (i.e., if data was not linear and if start and end pointers do not point to the same chunk). diff --git a/Documentation/bpf/prog_cgroup_sockopt.rst b/Documentation/bpf/prog_cgroup_sockopt.rst index 172f957204bf..1226a94af07a 100644 --- a/Documentation/bpf/prog_cgroup_sockopt.rst +++ b/Documentation/bpf/prog_cgroup_sockopt.rst @@ -98,10 +98,65 @@ can access only the first ``PAGE_SIZE`` of that data. So it has to options: indicates that the kernel should use BPF's trimmed ``optval``. When the BPF program returns with the ``optlen`` greater than -``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno. +``PAGE_SIZE``, the userspace will receive original kernel +buffers without any modifications that the BPF program might have +applied. Example ======= +Recommended way to handle BPF programs is as follows: + +.. code-block:: c + + SEC("cgroup/getsockopt") + int getsockopt(struct bpf_sockopt *ctx) + { + /* Custom socket option. */ + if (ctx->level == MY_SOL && ctx->optname == MY_OPTNAME) { + ctx->retval = 0; + optval[0] = ...; + ctx->optlen = 1; + return 1; + } + + /* Modify kernel's socket option. */ + if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) { + ctx->retval = 0; + optval[0] = ...; + ctx->optlen = 1; + return 1; + } + + /* optval larger than PAGE_SIZE use kernel's buffer. */ + if (ctx->optlen > PAGE_SIZE) + ctx->optlen = 0; + + return 1; + } + + SEC("cgroup/setsockopt") + int setsockopt(struct bpf_sockopt *ctx) + { + /* Custom socket option. */ + if (ctx->level == MY_SOL && ctx->optname == MY_OPTNAME) { + /* do something */ + ctx->optlen = -1; + return 1; + } + + /* Modify kernel's socket option. */ + if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) { + optval[0] = ...; + return 1; + } + + /* optval larger than PAGE_SIZE use kernel's buffer. */ + if (ctx->optlen > PAGE_SIZE) + ctx->optlen = 0; + + return 1; + } + See ``tools/testing/selftests/bpf/progs/sockopt_sk.c`` for an example of BPF program that handles socket options. diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst index e87a8785bc1a..e9b022d70939 100644 --- a/Documentation/cdrom/index.rst +++ b/Documentation/cdrom/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -===== -cdrom -===== +====== +CD-ROM +====== .. toctree:: :maxdepth: 1 diff --git a/Documentation/conf.py b/Documentation/conf.py index 37314afd1ac8..d4fdf6a3875a 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -74,6 +74,7 @@ if major >= 3: "__percpu", "__rcu", "__user", + "__force", # include/linux/compiler_attributes.h: "__alias", diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index f75778d37488..e6f5bc39cf5c 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -127,17 +127,8 @@ bring CPU4 back online:: $ echo 1 > /sys/devices/system/cpu/cpu4/online smpboot: Booting Node 0 Processor 4 APIC 0x1 -The CPU is usable again. This should work on all CPUs. CPU0 is often special -and excluded from CPU hotplug. On X86 the kernel option -*CONFIG_BOOTPARAM_HOTPLUG_CPU0* has to be enabled in order to be able to -shutdown CPU0. Alternatively the kernel command option *cpu0_hotplug* can be -used. Some known dependencies of CPU0: - -* Resume from hibernate/suspend. Hibernate/suspend will fail if CPU0 is offline. -* PIC interrupts. CPU0 can't be removed if a PIC interrupt is detected. - -Please let Fenghua Yu <fenghua.yu@intel.com> know if you find any dependencies -on CPU0. +The CPU is usable again. This should work on all CPUs, but CPU0 is often special +and excluded from CPU hotplug. The CPU hotplug coordination ============================ diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 9b3f3e5f5a95..f2bcc5a7ea43 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -96,6 +96,12 @@ Command-line Parsing .. kernel-doc:: lib/cmdline.c :export: +Error Pointers +-------------- + +.. kernel-doc:: include/linux/err.h + :internal: + Sorting ------- @@ -412,3 +418,15 @@ Read-Copy Update (RCU) .. kernel-doc:: include/linux/rcu_sync.h .. kernel-doc:: kernel/rcu/sync.c + +.. kernel-doc:: kernel/rcu/tasks.h + +.. kernel-doc:: kernel/rcu/tree_stall.h + +.. kernel-doc:: include/linux/rcupdate_trace.h + +.. kernel-doc:: include/linux/rcupdate_wait.h + +.. kernel-doc:: include/linux/rcuref.h + +.. kernel-doc:: include/linux/rcutree.h diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst index 9fb0b1080d3b..d3c1f6d8c0e0 100644 --- a/Documentation/core-api/pin_user_pages.rst +++ b/Documentation/core-api/pin_user_pages.rst @@ -112,6 +112,12 @@ pages: This also leads to limitations: there are only 31-10==21 bits available for a counter that increments 10 bits at a time. +* Because of that limitation, special handling is applied to the zero pages + when using FOLL_PIN. We only pretend to pin a zero page - we don't alter its + refcount or pincount at all (it is permanent, so there's no need). The + unpinning functions also don't do anything to a zero page. This is + transparent to the caller. + * Callers must specifically request "dma-pinned tracking of pages". In other words, just calling get_user_pages() will not suffice; a new set of functions, pin_user_page() and related, must be used. diff --git a/Documentation/core-api/this_cpu_ops.rst b/Documentation/core-api/this_cpu_ops.rst index 5cb8b883ae83..91acbcf30e9b 100644 --- a/Documentation/core-api/this_cpu_ops.rst +++ b/Documentation/core-api/this_cpu_ops.rst @@ -53,7 +53,6 @@ preemption and interrupts:: this_cpu_add_return(pcp, val) this_cpu_xchg(pcp, nval) this_cpu_cmpxchg(pcp, oval, nval) - this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) this_cpu_sub(pcp, val) this_cpu_inc(pcp) this_cpu_dec(pcp) @@ -242,7 +241,6 @@ safe:: __this_cpu_add_return(pcp, val) __this_cpu_xchg(pcp, nval) __this_cpu_cmpxchg(pcp, oval, nval) - __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) __this_cpu_sub(pcp, val) __this_cpu_inc(pcp) __this_cpu_dec(pcp) diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst index 8ec4d6270b24..a4c9b9d1905f 100644 --- a/Documentation/core-api/workqueue.rst +++ b/Documentation/core-api/workqueue.rst @@ -348,6 +348,37 @@ Guidelines level of locality in wq operations and work item execution. +Monitoring +========== + +Use tools/workqueue/wq_monitor.py to monitor workqueue operations: :: + + $ tools/workqueue/wq_monitor.py events + total infl CPUtime CPUhog CMwake mayday rescued + events 18545 0 6.1 0 5 - - + events_highpri 8 0 0.0 0 0 - - + events_long 3 0 0.0 0 0 - - + events_unbound 38306 0 0.1 - - - - + events_freezable 0 0 0.0 0 0 - - + events_power_efficient 29598 0 0.2 0 0 - - + events_freezable_power_ 10 0 0.0 0 0 - - + sock_diag_events 0 0 0.0 0 0 - - + + total infl CPUtime CPUhog CMwake mayday rescued + events 18548 0 6.1 0 5 - - + events_highpri 8 0 0.0 0 0 - - + events_long 3 0 0.0 0 0 - - + events_unbound 38322 0 0.1 - - - - + events_freezable 0 0 0.0 0 0 - - + events_power_efficient 29603 0 0.2 0 0 - - + events_freezable_power_ 10 0 0.0 0 0 - - + sock_diag_events 0 0 0.0 0 0 - - + + ... + +See the command's help message for more info. + + Debugging ========= @@ -387,6 +418,7 @@ the stack trace of the offending worker thread. :: The work item's function should be trivially visible in the stack trace. + Non-reentrance Conditions ========================= diff --git a/Documentation/crypto/async-tx-api.rst b/Documentation/crypto/async-tx-api.rst index bfc773991bdc..27c146b54d71 100644 --- a/Documentation/crypto/async-tx-api.rst +++ b/Documentation/crypto/async-tx-api.rst @@ -66,7 +66,7 @@ features surfaced as a result: :: struct dma_async_tx_descriptor * - async_<operation>(<op specific parameters>, struct async_submit ctl *submit) + async_<operation>(<op specific parameters>, struct async_submit_ctl *submit) 3.2 Supported operations ------------------------ diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index e66916a483cd..f4acf9c2e90f 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -107,9 +107,12 @@ effectively disables ``panic_on_warn`` for KASAN reports. Alternatively, independent of ``panic_on_warn``, the ``kasan.fault=`` boot parameter can be used to control panic and reporting behaviour: -- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN - report or also panic the kernel (default: ``report``). The panic happens even - if ``kasan_multi_shot`` is enabled. +- ``kasan.fault=report``, ``=panic``, or ``=panic_on_write`` controls whether + to only print a KASAN report, panic the kernel, or panic the kernel on + invalid writes only (default: ``report``). The panic happens even if + ``kasan_multi_shot`` is enabled. Note that when using asynchronous mode of + Hardware Tag-Based KASAN, ``kasan.fault=panic_on_write`` always panics on + asynchronously checked accesses (including reads). Software and Hardware Tag-Based KASAN modes (see the section about various modes below) support altering stack trace collection behavior: diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 12b575b76b20..deede972f254 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -36,6 +36,7 @@ Running the selftests (hotplug tests are run in limited mode) To build the tests:: + $ make headers $ make -C tools/testing/selftests To run the tests:: @@ -168,6 +169,28 @@ the `-t` option for specific single tests. Either can be used multiple times:: For other features see the script usage output, seen with the `-h` option. +Timeout for selftests +===================== + +Selftests are designed to be quick and so a default timeout is used of 45 +seconds for each test. Tests can override the default timeout by adding +a settings file in their directory and set a timeout variable there to the +configured a desired upper timeout for the test. Only a few tests override +the timeout with a value higher than 45 seconds, selftests strives to keep +it that way. Timeouts in selftests are not considered fatal because the +system under which a test runs may change and this can also modify the +expected time it takes to run a test. If you have control over the systems +which will run the tests you can configure a test runner on those systems to +use a greater or lower timeout on the command line as with the `-o` or +the `--override-timeout` argument. For example to use 165 seconds instead +one would use: + + $ ./run_kselftest.sh --override-timeout 165 + +You can look at the TAP output to see if you ran into the timeout. Test +runners which know a test must run under a specific time can then optionally +treat these timeouts then as fatal. + Packaging selftests =================== diff --git a/Documentation/dev-tools/kunit/architecture.rst b/Documentation/dev-tools/kunit/architecture.rst index e95ab05342bb..f335f883f8f6 100644 --- a/Documentation/dev-tools/kunit/architecture.rst +++ b/Documentation/dev-tools/kunit/architecture.rst @@ -119,9 +119,9 @@ All expectations/assertions are formatted as: terminated immediately. - Assertions call the function: - ``void __noreturn kunit_abort(struct kunit *)``. + ``void __noreturn __kunit_abort(struct kunit *)``. - - ``kunit_abort`` calls the function: + - ``__kunit_abort`` calls the function: ``void __noreturn kunit_try_catch_throw(struct kunit_try_catch *try_catch)``. - ``kunit_try_catch_throw`` calls the function: diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index c736613c9b19..a98235326bab 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -250,15 +250,20 @@ Now we are ready to write the test cases. }; kunit_test_suite(misc_example_test_suite); + MODULE_LICENSE("GPL"); + 2. Add the following lines to ``drivers/misc/Kconfig``: .. code-block:: kconfig config MISC_EXAMPLE_TEST tristate "Test for my example" if !KUNIT_ALL_TESTS - depends on MISC_EXAMPLE && KUNIT=y + depends on MISC_EXAMPLE && KUNIT default KUNIT_ALL_TESTS +Note: If your test does not support being built as a loadable module (which is +discouraged), replace tristate by bool, and depend on KUNIT=y instead of KUNIT. + 3. Add the following lines to ``drivers/misc/Makefile``: .. code-block:: make diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 9faf2b4153fc..c27e1646ecd9 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -121,6 +121,12 @@ there's an allocation error. ``return`` so they only work from the test function. In KUnit, we stop the current kthread on failure, so you can call them from anywhere. +.. note:: + Warning: There is an exception to the above rule. You shouldn't use assertions + in the suite's exit() function, or in the free function for a resource. These + run when a test is shutting down, and an assertion here prevents further + cleanup code from running, potentially leading to a memory leak. + Customizing error messages -------------------------- @@ -160,7 +166,12 @@ many similar tests. In order to reduce duplication in these closely related tests, most unit testing frameworks (including KUnit) provide the concept of a *test suite*. A test suite is a collection of test cases for a unit of code with optional setup and teardown functions that run before/after the whole -suite and/or every test case. For example: +suite and/or every test case. + +.. note:: + A test case will only run if it is associated with a test suite. + +For example: .. code-block:: c @@ -190,7 +201,10 @@ after everything else. ``kunit_test_suite(example_test_suite)`` registers the test suite with the KUnit test framework. .. note:: - A test case will only run if it is associated with a test suite. + The ``exit`` and ``suite_exit`` functions will run even if ``init`` or + ``suite_init`` fail. Make sure that they can handle any inconsistent + state which may result from ``init`` or ``suite_init`` encountering errors + or exiting early. ``kunit_test_suite(...)`` is a macro which tells the linker to put the specified test suite in a special linker section so that it can be run by KUnit @@ -601,6 +615,57 @@ For example: KUNIT_ASSERT_STREQ(test, buffer, ""); } +Registering Cleanup Actions +--------------------------- + +If you need to perform some cleanup beyond simple use of ``kunit_kzalloc``, +you can register a custom "deferred action", which is a cleanup function +run when the test exits (whether cleanly, or via a failed assertion). + +Actions are simple functions with no return value, and a single ``void*`` +context argument, and fulfill the same role as "cleanup" functions in Python +and Go tests, "defer" statements in languages which support them, and +(in some cases) destructors in RAII languages. + +These are very useful for unregistering things from global lists, closing +files or other resources, or freeing resources. + +For example: + +.. code-block:: C + + static void cleanup_device(void *ctx) + { + struct device *dev = (struct device *)ctx; + + device_unregister(dev); + } + + void example_device_test(struct kunit *test) + { + struct my_device dev; + + device_register(&dev); + + kunit_add_action(test, &cleanup_device, &dev); + } + +Note that, for functions like device_unregister which only accept a single +pointer-sized argument, it's possible to directly cast that function to +a ``kunit_action_t`` rather than writing a wrapper function, for example: + +.. code-block:: C + + kunit_add_action(test, (kunit_action_t *)&device_unregister, &dev); + +``kunit_add_action`` can fail if, for example, the system is out of memory. +You can use ``kunit_add_action_or_reset`` instead which runs the action +immediately if it cannot be deferred. + +If you need more control over when the cleanup function is called, you +can trigger it early using ``kunit_release_action``, or cancel it entirely +with ``kunit_remove_action``. + Testing Static Functions ------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 274ee0890312..08d59842655c 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/arm/amlogic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Amlogic MesonX +title: Amlogic SoC based Platforms maintainers: - Kevin Hilman <khilman@baylibre.com> @@ -205,6 +205,13 @@ properties: - amlogic,ad401 - const: amlogic,a1 + - description: Boards with the Amlogic C3 C302X/C308L SoC + items: + - enum: + - amlogic,aw409 + - amlogic,aw419 + - const: amlogic,c3 + - description: Boards with the Amlogic Meson S4 S805X2 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 0c5b875cb654..d6c84b6e7fe6 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -287,7 +287,7 @@ examples: arm,trig-in-sigs = <0 1>; arm,trig-in-types = <PE_DBGTRIGGER PE_PMUIRQ>; - arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-sigs = <0 1 2 >; arm,trig-out-types = <PE_EDBGREQ PE_DBGRESTART PE_CTIIRQ>; @@ -309,24 +309,24 @@ examples: trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0>; - arm,trig-in-types=<GEN_INTREQ>; - arm,trig-out-sigs=<0>; - arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-in-sigs = <0>; + arm,trig-in-types = <GEN_INTREQ>; + arm,trig-out-sigs = <0>; + arm,trig-out-types = <GEN_HALTREQ>; arm,trig-conn-name = "sys_profiler"; }; trig-conns@1 { reg = <1>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "watchdog"; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<1 6>; - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-in-sigs = <1 6>; + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "g_counter"; }; }; diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml new file mode 100644 index 000000000000..cb78cfa56702 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Dummy sink component + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight dummy sink component is for the specific coresight sink devices + kernel don't have permission to access or configure, e.g., CoreSight EUD on + Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based + debug and trace capabilities. For this device, a dummy driver is needed to + register it as Coresight sink device in kernel side, so that path can be + created in the driver. Then the trace flow would be transferred to EUD via + coresight link of AP processor. It provides Coresight API for operations on + dummy source devices, such as enabling and disabling them. It also provides + the Coresight dummy source paths for debugging. + + The primary use case of the coresight dummy sink is to build path in kernel + side for dummy sink component. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + - James Clark <james.clark@arm.com> + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Hao Zhang <quic_hazha@quicinc.com> + +properties: + compatible: + enum: + - arm,coresight-dummy-sink + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + description: Input connection from the Coresight Trace bus to + dummy sink, such as Embedded USB debugger(EUD). + + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - in-ports + +additionalProperties: false + +examples: + # Minimum dummy sink definition. Dummy sink connect to coresight replicator. + - | + sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in_replicator_swao: endpoint { + remote-endpoint = <&replicator_swao_out_eud>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml new file mode 100644 index 000000000000..5fedaed49a1f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Dummy source component + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight dummy source component is for the specific coresight source + devices kernel don't have permission to access or configure. For some SOCs, + there would be Coresight source trace components on sub-processor which + are conneted to AP processor via debug bus. For these devices, a dummy driver + is needed to register them as Coresight source devices, so that paths can be + created in the driver. It provides Coresight API for operations on dummy + source devices, such as enabling and disabling them. It also provides the + Coresight dummy source paths for debugging. + + The primary use case of the coresight dummy source is to build path in kernel + side for dummy source component. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + - James Clark <james.clark@arm.com> + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Hao Zhang <quic_hazha@quicinc.com> + +properties: + compatible: + enum: + - arm,coresight-dummy-source + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + description: Output connection from the source to Coresight + Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - out-ports + +additionalProperties: false + +examples: + # Minimum dummy source definition. Dummy source connect to coresight funnel. + - | + source { + compatible = "arm,coresight-dummy-source"; + + out-ports { + port { + dummy_riscv_out_funnel_swao: endpoint { + remote-endpoint = <&funnel_swao_in_dummy_riscv>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 09c319f803ba..cdd65881fcdd 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -122,14 +122,14 @@ properties: arm,vexpress,position: description: When daughterboards are stacked on one site, their position in the stack be be described this attribute. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 arm,vexpress,dcc: description: When describing tiles consisting of more than one DCC, its number can be specified with this attribute. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 @@ -180,13 +180,13 @@ patternProperties: - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string enum: - rs1 - rs2 arm,hbi: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: This indicates the ARM HBI (Hardware Board ID), this is ARM's unique board model ID, visible on the PCB's silkscreen. @@ -197,7 +197,7 @@ patternProperties: property, describing the physical location of the children nodes. 0 means motherboard site, while 1 and 2 are daughterboard sites, and 0xf means "sisterboard" which is the site containing the main CPU tile. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index ab1b352344ae..67a66bf74895 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -52,100 +52,6 @@ Example: reg = <0xe3804000 0x1000>; }; -SHDWC Shutdown Controller - -required properties: -- compatible: Should be "atmel,<chip>-shdwc". - <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -optional properties: -- atmel,wakeup-mode: String, operation mode of the wakeup mode. - Supported values are: "none", "high", "low", "any". -- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). - -optional at91sam9260 properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9rl properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9x5 properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. - -Example: - - shdwc@fffffd10 { - compatible = "atmel,at91sam9260-shdwc"; - reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; - }; - -SHDWC SAMA5D2-Compatible Shutdown Controller - -1) shdwc node - -required properties: -- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or - "microchip,sama7g5-shdwc" -- reg: should contain registers location and length -- clocks: phandle to input clock. -- #address-cells: should be one. The cell is the wake-up input index. -- #size-cells: should be zero. - -optional properties: - -- debounce-delay-us: minimum wake-up inputs debouncer period in - microseconds. It's usually a board-related property. -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. - -optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -The node contains child nodes for each wake-up input that the platform uses. - -2) input nodes - -Wake-up input nodes are usually described in the "board" part of the Device -Tree. Note also that input 0 is linked to the wake-up pin and is frequently -used. - -Required properties: -- reg: should contain the wake-up input index [0 - 15]. - -Optional properties: -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described - by the child, forces the wake-up of the core power supply on a high level. - The default is to be active low. - -Example: - -On the SoC side: - shdwc@f8048010 { - compatible = "atmel,sama5d2-shdwc"; - reg = <0xf8048010 0x10>; - clocks = <&clk32k>; - #address-cells = <1>; - #size-cells = <0>; - atmel,wakeup-rtc-timer; - }; - -On the board side: - shdwc@f8048010 { - debounce-delay-us = <976>; - - input@0 { - reg = <0>; - }; - - input@1 { - reg = <1>; - atmel,wakeup-active-high; - }; - }; - Special Function Registers (SFR) Special Function Registers (SFR) manage specific aspects of the integrated diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 454b0e93245d..5c3ac97e8728 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -25,13 +25,15 @@ properties: - enum: - asus,rt-ac56u - asus,rt-ac68u + - buffalo,wzr-1166dhp + - buffalo,wzr-1166dhp2 - buffalo,wzr-1750dhp - linksys,ea6300-v1 - linksys,ea6500-v2 - - luxul,xap-1510v1 + - luxul,xap-1510-v1 - luxul,xwc-1000 - - netgear,r6250v1 - - netgear,r6300v2 + - netgear,r6250-v1 + - netgear,r6300-v2 - smartrg,sr400ac - brcm,bcm94708 - const: brcm,bcm4708 @@ -42,8 +44,8 @@ properties: - asus,rt-n18u - buffalo,wzr-600dhp2 - buffalo,wzr-900dhp - - luxul,xap-1410v1 - - luxul,xwr-1200v1 + - luxul,xap-1410-v1 + - luxul,xwr-1200-v1 - tplink,archer-c5-v2 - const: brcm,bcm47081 - const: brcm,bcm4708 @@ -72,7 +74,7 @@ properties: - luxul,xap-1610-v1 - luxul,xbr-4500-v1 - luxul,xwc-2000-v1 - - luxul,xwr-3100v1 + - luxul,xwr-3100-v1 - luxul,xwr-3150-v1 - netgear,r8500 - phicomm,k3 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ff272e517d57..9e6a45eea4e5 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -153,6 +153,7 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,cortex-r52 - arm,cortex-x1 - arm,cortex-x1c - arm,cortex-x2 @@ -196,7 +197,7 @@ properties: - qcom,scorpion enable-method: - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string oneOf: # On ARM v8 64-bit this property is required - enum: @@ -245,8 +246,8 @@ properties: cpu-release-addr: oneOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - $ref: '/schemas/types.yaml#/definitions/uint64' + - $ref: /schemas/types.yaml#/definitions/uint32 + - $ref: /schemas/types.yaml#/definitions/uint64 description: The DT specification defines this as 64-bit always, but some 32-bit Arm systems have used a 32-bit value which must be supported. @@ -254,7 +255,7 @@ properties: property value of "spin-table". cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 description: | @@ -270,7 +271,7 @@ properties: cci-control-port: true dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The @@ -307,7 +308,7 @@ properties: PM domain provider, must be "psci". qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the SAW* node associated with this CPU. @@ -317,7 +318,7 @@ properties: * arm/msm/qcom,saw2.txt qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the ACC* node associated with this CPU. @@ -328,7 +329,7 @@ properties: * arm/msm/qcom,kpss-acc.txt rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the syscon node controlling the cpu core power domains. @@ -338,7 +339,7 @@ properties: the cpu-core power-domains. secondary-boot-reg: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: | Required for systems that have an "enable-method" property value of "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 15d411084065..2510eaa8906d 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -726,6 +726,12 @@ properties: - const: dh,imx6ull-dhcor-som - const: fsl,imx6ull + - description: i.MX6ULL DHCOR SoM based Boards + items: + - const: marantec,imx6ull-dhcor-maveo-box + - const: dh,imx6ull-dhcor-som + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -901,6 +907,7 @@ properties: - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - fsl,imx8mm-evkb # i.MX8MM EVKB Board - gateworks,imx8mm-gw7904 - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit @@ -918,6 +925,12 @@ properties: - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm + - description: Emtop i.MX8MM based Boards + items: + - const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1 + - const: ees,imx8mm-emtop-som # i.MX8MM Emtop SOM-IMX8MMLPD4 module + - const: fsl,imx8mm + - description: Engicam i.Core MX8M Mini SoM based boards items: - enum: @@ -1019,6 +1032,7 @@ properties: - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board - polyhex,imx8mp-debix # Polyhex Debix boards - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 91b96065f7df..86b59de7707e 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -96,8 +96,8 @@ examples: compatible = "ti,k2g-sci"; ti,system-reboot-controller; mbox-names = "rx", "tx"; - mboxes= <&msgmgr 5 2>, - <&msgmgr 0 0>; + mboxes = <&msgmgr 5 2>, + <&msgmgr 0 0>; reg-names = "debug_messages"; reg = <0x02921800 0x800>; }; @@ -107,8 +107,8 @@ examples: compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x44083000 0x1000>; diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml new file mode 100644 index 000000000000..fb190db61525 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35 series SoC based platforms + +maintainers: + - Jacky Huang <ychuang3@nuvoton.com> + +description: | + Boards with an ARMv8 based Nuvoton MA35 series SoC shall have + the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: MA35D1 based boards + items: + - enum: + - nuvoton,ma35d1-iot + - nuvoton,ma35d1-som + - const: nuvoton,ma35d1 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml index 6871483947c5..d386744c8815 100644 --- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml +++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml# +$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NPCM Platforms diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 3a2c908ff282..0c5381e081bd 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -100,7 +100,7 @@ properties: patternProperties: "^power-domain-": - $ref: "../power/power-domain.yaml#" + $ref: /schemas/power/power-domain.yaml# type: object description: | diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index d9dd25695c3d..450f616774e0 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -40,6 +40,7 @@ description: | msm8939 msm8953 msm8956 + msm8960 msm8974 msm8976 msm8992 @@ -69,6 +70,7 @@ description: | sdm845 sdx55 sdx65 + sdx75 sm4250 sm6115 sm6115p @@ -85,9 +87,15 @@ description: | The 'board' element must be one of the following strings: adp + ap-al02-c2 + ap-al02-c6 ap-al02-c7 + ap-al02-c8 + ap-al02-c9 ap-mi01.2 + ap-mi01.3 ap-mi01.6 + ap-mi01.9 cdp cp01-c1 dragonboard @@ -191,6 +199,7 @@ properties: - items: - enum: - qcom,msm8960-cdp + - samsung,expressatt - const: qcom,msm8960 - items: @@ -333,7 +342,9 @@ properties: - items: - enum: - qcom,ipq5332-ap-mi01.2 + - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 + - qcom,ipq5332-ap-mi01.9 - const: qcom,ipq5332 - items: @@ -351,7 +362,11 @@ properties: - items: - enum: + - qcom,ipq9574-ap-al02-c2 + - qcom,ipq9574-ap-al02-c6 - qcom,ipq9574-ap-al02-c7 + - qcom,ipq9574-ap-al02-c8 + - qcom,ipq9574-ap-al02-c9 - const: qcom,ipq9574 - description: Sierra Wireless MangOH Green with WP8548 Module @@ -380,9 +395,9 @@ properties: - qcom,qru1000-idp - const: qcom,qru1000 - - description: Qualcomm Technologies, Inc. SC7180 IDP - items: + - items: - enum: + - acer,aspire1 - qcom,sc7180-idp - const: qcom,sc7180 @@ -821,6 +836,11 @@ properties: - items: - enum: + - qcom,sdx75-idp + - const: qcom,sdx75 + + - items: + - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -884,6 +904,11 @@ properties: - items: - enum: + - fxtec,pro1x + - const: qcom,sm6115 + + - items: + - enum: - lenovo,j606f - const: qcom,sm6115p - const: qcom,sm6115 @@ -1042,6 +1067,7 @@ allOf: - qcom,sdm845 - qcom,sdx55 - qcom,sdx65 + - qcom,sdx75 - qcom,sm4250 - qcom,sm6115 - qcom,sm6125 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index ec141c937b8b..ecdb72a519cb 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -40,6 +40,11 @@ properties: - const: anbernic,rg353p - const: rockchip,rk3566 + - description: Anbernic RG353PS + items: + - const: anbernic,rg353ps + - const: rockchip,rk3566 + - description: Anbernic RG353V items: - const: anbernic,rg353v @@ -102,6 +107,12 @@ properties: - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM - const: rockchip,rk3588 + - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards + items: + - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board + - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM + - const: rockchip,rk3588 + - description: Elgin RV1108 R1 items: - const: elgin,rv1108-r1 @@ -189,6 +200,7 @@ properties: items: - enum: - friendlyarm,nanopi-r2c + - friendlyarm,nanopi-r2c-plus - friendlyarm,nanopi-r2s - const: rockchip,rk3328 @@ -534,6 +546,11 @@ properties: - const: hugsun,x99 - const: rockchip,rk3399 + - description: Indiedroid Nova SBC + items: + - const: indiedroid,nova + - const: rockchip,rk3588s + - description: Khadas Edge series boards items: - enum: @@ -562,6 +579,13 @@ properties: - const: leez,p710 - const: rockchip,rk3399 + - description: Lunzn FastRhino R66S / R68S + items: + - enum: + - lunzn,fastrhino-r66s + - lunzn,fastrhino-r68s + - const: rockchip,rk3568 + - description: mqmaker MiQi items: - const: mqmaker,miqi diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index deb2cf971871..e3ffd8159ab6 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -72,6 +72,16 @@ properties: - const: samsung,exynos4210 - const: samsung,exynos4 + - description: Samsung Galaxy Tab3 family boards + items: + - enum: + - samsung,t310 # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) + - samsung,t311 # Samsung Galaxy Tab 3 8.0 3G (SM-T311) + - samsung,t315 # Samsung Galaxy Tab 3 8.0 LTE (SM-T315) + - const: samsung,tab3 + - const: samsung,exynos4212 + - const: samsung,exynos4 + - description: Exynos4412 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml new file mode 100644 index 000000000000..72554a4f1c92 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext Synquacer platform + +maintainers: + - Masahisa Kojima <masahisa.kojima@linaro.org> + - Jassi Brar <jaswinder.singh@linaro.org> + +description: + Socionext SC2A11B (Synquacer) SoC based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - socionext,developer-box + - const: socionext,synquacer + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index ad8e51aa01b0..b63ff591ef8f 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -15,12 +15,13 @@ properties: oneOf: - items: - enum: - - st,stm32mp157-syscfg - - st,stm32mp151-pwr-mcu - - st,stm32-syscfg - st,stm32-power-config + - st,stm32-syscfg - st,stm32-tamp - st,stm32f4-gcan + - st,stm32mp151-pwr-mcu + - st,stm32mp157-syscfg + - st,stm32mp25-syscfg - const: syscon - items: - const: st,stm32-tamp diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 13e34241145b..4466b455bffa 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -155,6 +155,18 @@ properties: - const: seeed,stm32mp157c-odyssey-som - const: st,stm32mp157 + - description: Phytec STM32MP1 SoM based Boards + items: + - const: phytec,phycore-stm32mp1-3 + - const: phytec,phycore-stm32mp157c-som + - const: st,stm32mp157 + + - description: ST STM32MP257 based Boards + items: + - enum: + - st,stm32mp257f-ev1 + - const: st,stm32mp257 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 013821f4a7b8..ee8fdd2da869 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -305,6 +305,12 @@ properties: - const: allwinner,i12-tvbox - const: allwinner,sun7i-a20 + - description: ICnova A20 ADB4006 + items: + - const: incircuit,icnova-a20-adb4006 + - const: incircuit,icnova-a20 + - const: allwinner,sun7i-a20 + - description: ICNova A20 SWAC items: - const: incircuit,icnova-a20-swac diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 0df41f5b7e2a..fcf956406168 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -167,6 +167,11 @@ properties: - const: nvidia,p3737-0000+p3701-0000 - const: nvidia,p3701-0000 - const: nvidia,tegra234 + - description: NVIDIA IGX Orin Development Kit + items: + - const: nvidia,p3740-0002+p3701-0008 + - const: nvidia,p3701-0008 + - const: nvidia,tegra234 - description: Jetson Orin NX items: - const: nvidia,p3767-0000 @@ -176,5 +181,14 @@ properties: - const: nvidia,p3768-0000+p3767-0000 - const: nvidia,p3767-0000 - const: nvidia,tegra234 + - description: Jetson Orin Nano + items: + - const: nvidia,p3767-0005 + - const: nvidia,tegra234 + - description: Jetson Orin Nano Developer Kit + items: + - const: nvidia,p3768-0000+p3767-0005 + - const: nvidia,p3767-0005 + - const: nvidia,tegra234 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index e1183f90bb06..577eee95c893 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra + items: + - const: phytec,am625-phyboard-lyra-rdk + - const: phytec,am62-phycore-som + - const: ti,am625 + - description: K3 AM625 SoC items: - enum: @@ -33,6 +39,26 @@ properties: - ti,am62-lp-sk - const: ti,am625 + - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards + items: + - enum: + - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia + - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board + - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia + - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT + - const: toradex,verdin-am62 # Verdin AM62 Module + - const: ti,am625 + + - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT + items: + - enum: + - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia + - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia + - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module + - const: toradex,verdin-am62 # Verdin AM62 Module + - const: ti,am625 + - description: K3 AM642 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt index 61d77acbeb5e..f925290d4641 100644 --- a/Documentation/devicetree/bindings/arm/xen.txt +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -56,7 +56,7 @@ hypervisor { }; The format and meaning of the "xen,uefi-*" parameters are similar to those in -Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However +Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However they differ because they are provided by the Xen hypervisor, together with a set of UEFI runtime services implemented via hypercalls, see http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html. diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index 969cfe6dc434..f57ed0347894 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Platforms maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC @@ -61,10 +61,10 @@ properties: - const: xlnx,zynqmp-zc1254 - const: xlnx,zynqmp - - description: Xilinx internal board zc1275 + - description: Xilinx evaluation board zcu1275 items: - - const: xlnx,zynqmp-zc1275-revA - - const: xlnx,zynqmp-zc1275 + - const: xlnx,zynqmp-zcu1275-revA + - const: xlnx,zynqmp-zcu1275 - const: xlnx,zynqmp - description: Xilinx 96boards compatible board zcu100 diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 7fdf40954a4c..38770c4c85fd 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -8,7 +8,7 @@ title: Common Properties for Serial ATA AHCI controllers maintainers: - Hans de Goede <hdegoede@redhat.com> - - Damien Le Moal <damien.lemoal@opensource.wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: This document defines device tree properties for a common AHCI SATA diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index 9b31f864e071..b29ce598f9aa 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ceva AHCI SATA Controller maintainers: - - Piyush Mehta <piyush.mehta@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> description: | The Ceva SATA controller mostly conforms to the AHCI interface with some @@ -32,7 +32,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml new file mode 100644 index 000000000000..b5e5767d8698 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller for Rockchip devices + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + This document defines device tree bindings for the Synopsys DWC + implementation of the AHCI SATA controller found in Rockchip + devices. + +select: + properties: + compatible: + contains: + enum: + - rockchip,rk3568-dwc-ahci + - rockchip,rk3588-dwc-ahci + required: + - compatible + +properties: + compatible: + items: + - enum: + - rockchip,rk3568-dwc-ahci + - rockchip,rk3588-dwc-ahci + - const: snps,dwc-ahci + + ports-implemented: + const: 1 + + sata-port@0: + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + properties: + reg: + const: 0 + + unevaluatedProperties: false + +patternProperties: + "^sata-port@[1-9a-e]$": false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports-implemented + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3588-dwc-ahci + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: sata + - const: pmalive + - const: rxoob + - const: ref + - const: asic + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3568-dwc-ahci + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: sata + - const: pmalive + - const: rxoob + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/ata/ahci.h> + #include <dt-bindings/phy/phy.h> + + sata@fe210000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0xfe210000 0x1000>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, + <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, + <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy0_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml index c1457910520b..34c5bf65b02d 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml @@ -31,11 +31,11 @@ properties: PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx) clock, etc. minItems: 1 - maxItems: 4 + maxItems: 6 clock-names: minItems: 1 - maxItems: 4 + maxItems: 6 items: oneOf: - description: Application APB/AHB/AXI BIU clock @@ -48,6 +48,10 @@ properties: const: pmalive - description: RxOOB detection clock const: rxoob + - description: PHY Transmit Clock + const: asic + - description: PHY Receive Clock + const: rbc - description: SATA Ports reference clock const: ref diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml index 5afa4b57ce20..4c848fcb5a5d 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -13,6 +13,15 @@ description: This document defines device tree bindings for the generic Synopsys DWC implementation of the AHCI SATA controller. +select: + properties: + compatible: + enum: + - snps,dwc-ahci + - snps,spear-ahci + required: + - compatible + allOf: - $ref: snps,dwc-ahci-common.yaml# @@ -23,10 +32,6 @@ properties: const: snps,dwc-ahci - description: SPEAr1340 AHCI SATA device const: snps,spear-ahci - - description: Rockhip RK3568 AHCI controller - items: - - const: rockchip,rk3568-dwc-ahci - - const: snps,dwc-ahci patternProperties: "^sata-port@[0-9a-e]$": diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index 49304a1476ab..be95f6b97b41 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -40,6 +40,7 @@ properties: linux,keymap: true linux,no-autorepeat: + type: boolean description: Disable keyrepeat default-brightness-level: diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml index f089634f9466..6d7bca6c138e 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml +++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml @@ -97,7 +97,7 @@ properties: - enum: [ ick, fck, sys_clk ] - items: - const: fck - - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ] + - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ] - items: - const: fck - const: phy-clk diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index d8b91944180a..44892aa589fd 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -129,6 +129,7 @@ allOf: - qcom,sm8250-llcc - qcom,sm8350-llcc - qcom,sm8450-llcc + - qcom,sm8550-llcc then: properties: reg: diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml new file mode 100644 index 000000000000..6d84cee1bd75 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 Peripherals Clock Control Unit + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Jian Hu <jian.hu@jian.hu.com> + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +properties: + compatible: + const: amlogic,a1-peripherals-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div3 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input oscillator (usually at 24MHz) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,a1-pll-clkc.h> + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..a59b188a8bf5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 PLL Clock Control Unit + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Jian Hu <jian.hu@jian.hu.com> + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +properties: + compatible: + const: amlogic,a1-pll-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixpll_in + - description: input hifipll_in + + clock-names: + items: + - const: fixpll_in + - const: hifipll_in + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt deleted file mode 100644 index 13f45db3b66d..000000000000 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ /dev/null @@ -1,58 +0,0 @@ -Device Tree Clock bindings for arch-at91 - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Slow Clock controller: - -Required properties: -- compatible : shall be one of the following: - "atmel,at91sam9x5-sckc", - "atmel,sama5d3-sckc", - "atmel,sama5d4-sckc" or - "microchip,sam9x60-sckc": - at91 SCKC (Slow Clock Controller) -- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. -- clocks : shall be the input parent clock phandle for the clock. - -Optional properties: -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly - provided on XIN. - -For example: - sckc@fffffe50 { - compatible = "atmel,at91sam9x5-sckc"; - reg = <0xfffffe50 0x4>; - clocks = <&slow_xtal>; - #clock-cells = <0>; - }; - -Power Management Controller (PMC): - -Required properties: -- compatible : shall be "atmel,<chip>-pmc", "syscon" or - "microchip,sam9x60-pmc" - <chip> can be: at91rm9200, at91sam9260, at91sam9261, - at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, - at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, - sama5d2, sama5d3 or sama5d4. -- #clock-cells : from common clock binding; shall be set to 2. The first entry - is the type of the clock (core, system, peripheral or generated) and the - second entry its index as provided by the datasheet -- clocks : Must contain an entry for each entry in clock-names. -- clock-names: Must include the following entries: "slow_clk", "main_xtal" - -Optional properties: -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly - provided on XIN. - -For example: - pmc: pmc@f0018000 { - compatible = "atmel,sama5d4-pmc", "syscon"; - reg = <0xf0018000 0x120>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - #clock-cells = <2>; - clocks = <&clk32k>, <&main_xtal>; - clock-names = "slow_clk", "main_xtal"; - }; diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml new file mode 100644 index 000000000000..c1bdcd9058ed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Power Management Controller (PMC) + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: + The power management controller optimizes power consumption by controlling all + system and user peripheral clocks. The PMC enables/disables the clock inputs + to many of the peripherals and to the processor. + +properties: + compatible: + oneOf: + - items: + - const: atmel,at91sam9g20-pmc + - const: atmel,at91sam9260-pmc + - const: syscon + - items: + - enum: + - atmel,at91sam9g15-pmc + - atmel,at91sam9g25-pmc + - atmel,at91sam9g35-pmc + - atmel,at91sam9x25-pmc + - atmel,at91sam9x35-pmc + - const: atmel,at91sam9x5-pmc + - const: syscon + - items: + - enum: + - atmel,at91rm9200-pmc + - atmel,at91sam9260-pmc + - atmel,at91sam9g45-pmc + - atmel,at91sam9n12-pmc + - atmel,at91sam9rl-pmc + - atmel,at91sam9x5-pmc + - atmel,sama5d2-pmc + - atmel,sama5d3-pmc + - atmel,sama5d4-pmc + - microchip,sam9x60-pmc + - microchip,sama7g5-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#clock-cells": + description: | + - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM, + PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined + in <dt-bindings/clock/at91.h>) + - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h + (for core clocks) or as defined in datasheet (for system, peripheral, + gck and programmable clocks). + const: 2 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + atmel,osc-bypass: + description: set when a clock signal is directly provided on XIN + type: boolean + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - microchip,sam9x60-pmc + - microchip,sama7g5-pmc + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: td_slck + - const: md_slck + - const: main_xtal + + - if: + properties: + compatible: + contains: + enum: + - atmel,at91rm9200-pmc + - atmel,at91sam9260-pmc + - atmel,at91sam9g20-pmc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: slow_xtal + - const: main_xtal + + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d2-pmc + - atmel,sama5d3-pmc + - atmel,sama5d4-pmc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: slow_clk + - const: main_xtal + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmc: clock-controller@f0018000 { + compatible = "atmel,sama5d4-pmc", "syscon"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml new file mode 100644 index 000000000000..7be29877e6d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Slow Clock Controller (SCKC) + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +properties: + compatible: + oneOf: + - enum: + - atmel,at91sam9x5-sckc + - atmel,sama5d3-sckc + - atmel,sama5d4-sckc + - microchip,sam9x60-sckc + - items: + - const: microchip,sama7g5-sckc + - const: microchip,sam9x60-sckc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + enum: [0, 1] + + atmel,osc-bypass: + type: boolean + description: set when a clock signal is directly provided on XIN + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +allOf: + - if: + properties: + compatible: + contains: + enum: + - microchip,sam9x60-sckc + then: + properties: + "#clock-cells": + const: 1 + else: + properties: + "#clock-cells": + const: 0 + +additionalProperties: false + +examples: + - | + clk32k: clock-controller@fffffe50 { + compatible = "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml index 199818b2fb6d..cd0d763ce2f3 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings +title: Broadcom BCM63268 Timer Clock and Reset maintainers: - Ãlvaro Fernández Rojas <noltari@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml index 998e5cce652f..380cb6d80025 100644 --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Clock maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 SoC clocks driver bindings. The clock diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml index 0dbc1433fede..80539f88bc27 100644 --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -24,6 +24,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 2 + clocks: minItems: 6 maxItems: 7 diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml index ff9600474df2..0a6dc1a6e122 100644 --- a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP i.MX8MP AudioMIX Block Control Binding +title: NXP i.MX8MP AudioMIX Block Control maintainers: - Marek Vasut <marex@denx.de> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index 9e733b10c392..509df06b9c9d 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -98,9 +98,9 @@ required: patternProperties: "^usb-phy@[a-f0-9]+$": - allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ] + $ref: /schemas/phy/ingenic,phy-usb.yaml# "^mac-phy-ctrl@[a-f0-9]+$": - allOf: [ $ref: "../net/ingenic,mac.yaml#" ] + $ref: /schemas/net/ingenic,mac.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml new file mode 100644 index 000000000000..ba7ffc5b16a0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MTMIPS SoCs System Controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + MediaTek MIPS and Ralink SoCs provides a system controller to allow + to access to system control registers. These registers include clock + and reset related ones so this node is both clock and reset provider + for the rest of the world. + + These SoCs have an XTAL from where the cpu clock is + provided as well as derived clocks for the bus and the peripherals. + +properties: + compatible: + items: + - enum: + - ralink,mt7620-sysc + - ralink,mt7628-sysc + - ralink,mt7688-sysc + - ralink,rt2880-sysc + - ralink,rt3050-sysc + - ralink,rt3052-sysc + - ralink,rt3352-sysc + - ralink,rt3883-sysc + - ralink,rt5350-sysc + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + description: + The first cell indicates the clock number. + const: 1 + + '#reset-cells': + description: + The first cell indicates the reset bit within the register. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@0 { + compatible = "ralink,rt5350-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml new file mode 100644 index 000000000000..8f0c43683729 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Clock Controller Module + +maintainers: + - Chi-Fang Li <cfli0@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +description: | + The MA35D1 clock controller generates clocks for the whole chip, + including system clocks and all peripheral clocks. + + See also: + include/dt-bindings/clock/ma35d1-clk.h + +properties: + compatible: + items: + - const: nuvoton,ma35d1-clk + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + nuvoton,pll-mode: + description: + A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL, + EPLL, and VPLL in sequential. + maxItems: 5 + items: + enum: + - integer + - fractional + - spread-spectrum + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + + clock-controller@40460200 { + compatible = "nuvoton,ma35d1-clk"; + reg = <0x40460200 0x100>; + #clock-cells = <1>; + clocks = <&clk_hxt>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml index 659669bf224b..9436266828af 100644 --- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml @@ -19,6 +19,7 @@ properties: - qcom,ipq5332-a53pll - qcom,ipq6018-a53pll - qcom,ipq8074-a53pll + - qcom,ipq9574-a73pll - qcom,msm8916-a53pll - qcom,msm8939-a53pll diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml new file mode 100644 index 000000000000..fe9fd4cb185f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on MSM8953 + +maintainers: + - Adam Skladowski <a_skl39@protonmail.com> + - Sireesh Kodali <sireeshkodali@protonmail.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on MSM8953. + + See also: include/dt-bindings/clock/qcom,gcc-msm8953.h + +properties: + compatible: + const: qcom,gcc-msm8953 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + + clock-names: + items: + - const: xo + - const: sleep + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml index ae01e7749534..ba969e7a57bf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -30,7 +30,6 @@ properties: enum: - qcom,gcc-ipq6018 - qcom,gcc-mdm9607 - - qcom,gcc-msm8953 - qcom,gcc-mdm9615 required: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index 06dce0c6b7d0..8bf9b6f49550 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -32,6 +32,10 @@ properties: - const: bi_tcxo_ao - const: sleep_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks @@ -45,6 +49,8 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@100000 { compatible = "qcom,gcc-sc7180"; reg = <0x00100000 0x1f0000>; @@ -52,6 +58,7 @@ examples: <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC7180_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml index 947b47168cec..ff0b18bbb0fc 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -43,6 +43,10 @@ properties: - const: ufs_phy_tx_symbol_0_clk - const: usb3_phy_wrapper_gcc_usb30_pipe_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks @@ -56,6 +60,8 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@100000 { compatible = "qcom,gcc-sc7280"; reg = <0x00100000 0x1f0000>; @@ -71,6 +77,7 @@ examples: "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + power-domains = <&rpmhpd SC7280_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index b752542ee20c..ead6665b9a45 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -23,11 +23,13 @@ properties: clocks: items: - description: Board XO source + - description: Board active XO source - description: Sleep clock source clock-names: items: - const: bi_tcxo + - const: bi_tcxo_ao - const: sleep_clk required: @@ -47,8 +49,9 @@ examples: compatible = "qcom,gcc-sm8250"; reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "sleep_clk"; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index 1e3dc9deded9..a00216b3b15a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -50,6 +50,9 @@ properties: - const: gcc_gpu_gpll0_clk_src - const: gcc_gpu_gpll0_div_clk_src + power-domains: + maxItems: 1 + '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml index afc68eb9d7cc..944a0ea79cd6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml @@ -7,6 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller on IPQ9574 maintainers: + - Bjorn Andersson <andersson@kernel.org> - Anusha Rao <quic_anusha@quicinc.com> description: | diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index acf0c923c24f..422f5776a771 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -31,11 +31,11 @@ properties: - qcom,mmcc-sdm660 clocks: - minItems: 8 + minItems: 7 maxItems: 13 clock-names: - minItems: 8 + minItems: 7 maxItems: 13 '#clock-cells': @@ -104,6 +104,34 @@ allOf: compatible: contains: enum: + - qcom,mmcc-msm8226 + then: + properties: + clocks: + items: + - description: Board XO source + - description: MMSS GPLL0 voted clock + - description: GPLL0 voted clock + - description: GPLL1 voted clock + - description: GFX3D clock source + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + + clock-names: + items: + - const: xo + - const: mmss_gpll0_vote + - const: gpll0_vote + - const: gpll1_vote + - const: gfx3d_clk_src + - const: dsi0pll + - const: dsi0pllbyte + + - if: + properties: + compatible: + contains: + enum: - qcom,mmcc-msm8974 then: properties: diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index d5a250b7c2af..267cf8c26823 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -27,6 +27,7 @@ properties: - qcom,sdm845-rpmh-clk - qcom,sdx55-rpmh-clk - qcom,sdx65-rpmh-clk + - qcom,sdx75-rpmh-clk - qcom,sm6350-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml new file mode 100644 index 000000000000..3326dcd6766c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm LPASS core and audio clock control module provides the clocks, + and reset on SC8280XP. + + See also:: + include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h + +properties: + compatible: + enum: + - qcom,sc8280xp-lpassaudiocc + - qcom,sc8280xp-lpasscc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0x032a9000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0x033e0000 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml new file mode 100644 index 000000000000..98921fa236b1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SDX75 + +maintainers: + - Imran Shaik <quic_imrashai@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SDX75 + + See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h + +properties: + compatible: + const: qcom,sdx75-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: EMAC0 sgmiiphy mac rclk source + - description: EMAC0 sgmiiphy mac tclk source + - description: EMAC0 sgmiiphy rclk source + - description: EMAC0 sgmiiphy tclk source + - description: EMAC1 sgmiiphy mac rclk source + - description: EMAC1 sgmiiphy mac tclk source + - description: EMAC1 sgmiiphy rclk source + - description: EMAC1 sgmiiphy tclk source + - description: PCIE20 phy aux clock source + - description: PCIE_1 Pipe clock source + - description: PCIE_2 Pipe clock source + - description: PCIE Pipe clock source + - description: USB3 phy wrapper pipe clock source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x80000 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>, + <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>, + <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>, + <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>, + <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml index b480ead5bd69..cf4cad76f6c9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml @@ -27,9 +27,21 @@ properties: - description: GPLL0 div branch source - description: SNoC DVM GFX source + power-domains: + description: + A phandle and PM domain specifier for the VDD_GX power rail + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required VDD_GX performance point. + maxItems: 1 + required: - compatible - clocks + - power-domains + - required-opps allOf: - $ref: qcom,gcc.yaml# @@ -40,6 +52,7 @@ examples: - | #include <dt-bindings/clock/qcom,sm6375-gcc.h> #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> soc { #address-cells = <2>; @@ -52,6 +65,8 @@ examples: <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + power-domains = <&rpmpd SM6375_VDDGX>; + required-opps = <&rpmpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml new file mode 100644 index 000000000000..23505c8c3dbd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Video Clock & Reset Controller + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + Qualcomm video clock control module provides the clocks, resets and power + domains on Qualcomm SoCs. + + See also:: + include/dt-bindings/clock/qcom,videocc-sm8350.h + include/dt-bindings/reset/qcom,videocc-sm8350.h + +properties: + compatible: + const: qcom,sm8350-videocc + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Board sleep clock + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - clocks + - power-domains + - required-opps + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + clock-controller@abf0000 { + compatible = "qcom,sm8350-videocc"; + reg = <0x0abf0000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8350_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml new file mode 100644 index 000000000000..2320be920a5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller on SM8450 + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + Qualcomm graphics clock control module provides the clocks, resets and power + domains on Qualcomm SoCs. + + See also:: + include/dt-bindings/clock/qcom,sm8450-gpucc.h + include/dt-bindings/clock/qcom,sm8550-gpucc.h + include/dt-bindings/reset/qcom,sm8450-gpucc.h + +properties: + compatible: + enum: + - qcom,sm8450-gpucc + - qcom,sm8550-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d90000 { + compatible = "qcom,sm8450-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml new file mode 100644 index 000000000000..f1c6dd50f184 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller on SM8450 + +maintainers: + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm video clock control module provides the clocks, resets and power + domains on SM8450. + + See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h + +properties: + compatible: + enum: + - qcom,sm8450-videocc + - qcom,sm8550-videocc + + reg: + maxItems: 1 + + clocks: + items: + - description: Board XO source + - description: Video AHB clock from GCC + + power-domains: + maxItems: 1 + description: + MMCX power domain. + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8450-videocc"; + reg = <0x0aaf0000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml index 99686085f751..26d94cedc871 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -48,7 +48,7 @@ properties: patternProperties: "^dma-router@[a-f0-9]+$": type: object - $ref: "../dma/renesas,rzn1-dmamux.yaml#" + $ref: /schemas/dma/renesas,rzn1-dmamux.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml index 0589a63e273a..a36781a455b6 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml @@ -24,6 +24,7 @@ properties: - samsung,exynos3250-cmu-dmc - samsung,exynos3250-cmu-isp - samsung,exynos4210-clock + - samsung,exynos4212-clock - samsung,exynos4412-clock - samsung,exynos5250-clock - items: diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml new file mode 100644 index 000000000000..b2e40bd39a3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Audio Reference Clock + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + items: + - const: ti,am62-audio-refclk + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + audio_refclk0: clock@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 8>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 66765116aff5..64b8bce5962c 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -16,7 +16,6 @@ properties: - ti,am654-ehrpwm-tbclk - ti,am64-epwm-tbclk - ti,am62-epwm-tbclk - - const: syscon "#clock-cells": const: 1 @@ -33,8 +32,8 @@ additionalProperties: false examples: - | - ehrpwm_tbclk: syscon@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + ehrpwm_tbclk: clock@4140 { + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml index c1f04830a832..02bd556bd91a 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx clocking wizard maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> description: The clocking wizard is a soft ip clocking block of Xilinx versal. It diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml index 229af98b1d30..5cbb34d0b61b 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml @@ -7,9 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Versal clock controller maintainers: - - Michal Simek <michal.simek@xilinx.com> - - Jolly Shah <jolly.shah@xilinx.com> - - Rajan Vaja <rajan.vaja@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | The clock controller is a hardware block of Xilinx versal clock tree. It diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index ae515651fc6b..1c4d3eb87763 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -168,6 +168,13 @@ properties: offer the power, Capability Mismatch is set. Required for power sink and power dual role. + port: + $ref: /schemas/graph.yaml#/properties/port + description: OF graph bindings modeling a data bus to the connector, e.g. + there is a single High Speed (HS) port present in this connector. If there + is more than one bus (several port, with 'reg' property), they can be grouped + under 'ports'. + ports: $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings modeling any data bus to the connector @@ -322,6 +329,19 @@ examples: }; }; + # USB-C connector attached to SoC with a single High-Speed controller + - | + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + high_speed_ep: endpoint { + remote-endpoint = <&usb_hs_ep>; + }; + }; + }; + # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220) # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and # the output of MUX is connected to the SoC. diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index b8cc826c9501..b3a5356f9916 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -259,7 +259,7 @@ description: |+ http://infocenter.arm.com/help/index.jsp [5] ARM Linux Kernel documentation - Booting AArch64 Linux - Documentation/arm64/booting.rst + Documentation/arch/arm64/booting.rst [6] RISC-V Linux Kernel documentation - CPUs bindings Documentation/devicetree/bindings/riscv/cpus.yaml diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 6f5e7904181f..7e1bb992ce90 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -28,6 +28,7 @@ select: - qcom,apq8064 - qcom,apq8096 - qcom,ipq8064 + - qcom,ipq8074 - qcom,msm8939 - qcom,msm8960 - qcom,msm8974 diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml index ecf98a9e72b2..948e11ebe4ee 100644 --- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -19,8 +19,8 @@ properties: interrupts: items: - - description: "Interrupt for flow 0" - - description: "Interrupt for flow 1" + - description: Interrupt for flow 0 + - description: Interrupt for flow 1 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml index 286dffa0671b..e879bc0be8e2 100644 --- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml @@ -103,6 +103,12 @@ properties: wakeup-source: true linux,keycode: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 116 + deprecated: true + + linux,keycodes: + maxItems: 1 default: 116 required: diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml index 99be01539fcd..8dd36c2f76fd 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -11,9 +11,15 @@ maintainers: properties: compatible: - enum: - - fsl,imx23-dcp - - fsl,imx28-dcp + oneOf: + - enum: + - fsl,imx23-dcp + - fsl,imx28-dcp + - items: + - enum: + - fsl,imx6sl-dcp + - fsl,imx6ull-dcp + - const: fsl,imx28-dcp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml index e0fe63957888..a4006237aa89 100644 --- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -2,8 +2,8 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx cryptographic engine @@ -21,7 +21,7 @@ properties: const: intel,ixp4xx-crypto intel,npe-handle: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the NPE this crypto engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index e375bd981300..bb828068c3b8 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -26,10 +26,18 @@ properties: - items: - enum: + - qcom,ipq4019-qce + - qcom,sm8150-qce + - const: qcom,qce + + - items: + - enum: - qcom,ipq6018-qce - qcom,ipq8074-qce - qcom,msm8996-qce + - qcom,qcm2290-qce - qcom,sdm845-qce + - qcom,sm6115-qce - const: qcom,ipq4019-qce - const: qcom,qce @@ -46,16 +54,12 @@ properties: maxItems: 1 clocks: - items: - - description: iface clocks register interface. - - description: bus clocks data transfer interface. - - description: core clocks rest of the crypto block. + minItems: 1 + maxItems: 3 clock-names: - items: - - const: iface - - const: bus - - const: core + minItems: 1 + maxItems: 3 iommus: minItems: 1 @@ -89,9 +93,37 @@ allOf: enum: - qcom,crypto-v5.1 - qcom,crypto-v5.4 - - qcom,ipq4019-qce + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,msm8996-qce + - qcom,sdm845-qce + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: iface + - const: bus + - const: core + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qce + - qcom,sm6115-qce then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: core required: - clocks - clock-names diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml new file mode 100644 index 000000000000..71a2876bd6e4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Cryptographic Module + +maintainers: + - Jia Jie Ho <jiajie.ho@starfivetech.com> + - William Qiu <william.qiu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-crypto + + reg: + maxItems: 1 + + clocks: + items: + - description: Hardware reference clock + - description: AHB reference clock + + clock-names: + items: + - const: hclk + - const: ahb + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: TX DMA channel + - description: RX DMA channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + crypto: crypto@16000000 { + compatible = "starfive,jh7110-crypto"; + reg = <0x16000000 0x4000>; + clocks = <&clk 15>, <&clk 16>; + clock-names = "hclk", "ahb"; + interrupts = <28>; + resets = <&reset 3>; + dmas = <&dma 1 2>, + <&dma 0 2>; + dma-names = "tx", "rx"; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml index 9e8fbd02b150..8aead97a585b 100644 --- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx ZynqMP AES-GCM Hardware Accelerator maintainers: - - Kalyani Akula <kalyani.akula@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Kalyani Akula <kalyani.akula@amd.com> + - Michal Simek <michal.simek@amd.com> description: | The ZynqMP AES-GCM hardened cryptographic accelerator is used to diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml new file mode 100644 index 000000000000..a3428f012005 --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The Amlogic Meson Synopsys Designware Integration is composed of + - A Synopsys DesignWare MIPI DSI Host Controller IP + - A TOP control block controlling the Clocks & Resets of the IP + +allOf: + - $ref: dsi-controller.yaml# + +properties: + compatible: + enum: + - amlogic,meson-g12a-dw-mipi-dsi + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + items: + - const: pclk + - const: bit + - const: px + - const: meas + + resets: + maxItems: 1 + + reset-names: + items: + - const: top + + phys: + maxItems: 1 + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + dsi@6000 { + compatible = "amlogic,meson-g12a-dw-mipi-dsi"; + reg = <0x6000 0x400>; + resets = <&reset_top>; + reset-names = "top"; + clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>; + clock-names = "pclk", "bit", "px"; + phys = <&mipi_dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + mipi_dsi_venc_port: port@0 { + reg = <0>; + + mipi_dsi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + /* DSI Output */ + mipi_dsi_panel_port: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index 0c72120acc4f..cb0a90f02321 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -96,6 +96,11 @@ properties: description: A port node pointing to the HDMI-TX port node. + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver). + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml index c9b06885cc63..62f0521b0924 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml @@ -26,6 +26,7 @@ properties: const: dp force-hpd: + type: boolean description: Indicate driver need force hpd when hpd detect failed, this is used for some eDP screen which don not have a hpd signal. diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index 6e0e3ba9b49e..07388bf2b90d 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - fsl,imx6sx-ldb - fsl,imx8mp-ldb - fsl,imx93-ldb @@ -64,7 +65,9 @@ allOf: properties: compatible: contains: - const: fsl,imx93-ldb + enum: + - fsl,imx6sx-ldb + - fsl,imx93-ldb then: properties: ports: diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml index c4bf54397473..21d995f29a1e 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -20,6 +20,7 @@ properties: maxItems: 1 video-ports: + $ref: /schemas/types.yaml#/definitions/uint32 default: 0x230145 maximum: 0xffffff description: diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml index e841659e20cd..4ed7a799ba26 100644 --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -70,7 +70,9 @@ properties: samsung,burst-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM high speed burst mode frequency. + DSIM high speed burst mode frequency. If absent, + the pixel clock from the attached device or bridge + will be used instead. samsung,esc-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 @@ -80,7 +82,8 @@ properties: samsung,pll-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM oscillator clock frequency. + DSIM oscillator clock frequency. If absent, the clock frequency + of sclk_mipi will be used instead. phys: maxItems: 1 @@ -100,20 +103,42 @@ properties: specified. port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: DSI output port node to the panel or the next bridge in the chain. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 1, 2, 3, 4 ] + + lane-polarities: + minItems: 1 + maxItems: 5 + description: + The Samsung MIPI DSI IP requires that all the data lanes have + the same polarity. + + dependencies: + lane-polarities: [data-lanes] + required: - clock-names - clocks - compatible - interrupts - reg - - samsung,burst-clock-frequency - samsung,esc-clock-frequency - - samsung,pll-clock-frequency allOf: - $ref: ../dsi-controller.yaml# diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 81ca3cbc7abe..6c1de0b21722 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -21,6 +21,9 @@ properties: maxItems: 1 description: virtual channel number of a DSI peripheral + reset-gpios: + maxItems: 1 + vddc-supply: description: Regulator for 1.2V internal core power. diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index e1494b5007cb..0521261b04a9 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -4,16 +4,24 @@ $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Toshiba TC358767 eDP bridge +title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge maintainers: - Andrey Gusakov <andrey.gusakov@cogentembedded.com> -description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP +description: | + The TC358767/TC358867/TC9595 is bridge device which + converts DSI/DPI to eDP/DP . properties: compatible: - const: toshiba,tc358767 + oneOf: + - items: + - enum: + - toshiba,tc358867 + - toshiba,tc9595 + - const: toshiba,tc358767 + - const: toshiba,tc358767 reg: enum: diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml index 83c0d008265b..3ee8f9225984 100644 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -36,6 +36,9 @@ properties: description: GPIO signal to enable DDC bus maxItems: 1 + hdmi-pwr-supply: + description: Power supply for the HDMI +5V Power pin + port: $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing HDMI signals diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 75b4efd70ba8..fc11ab5fc465 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -21,6 +21,7 @@ properties: - fsl,imx28-lcdif - fsl,imx6sx-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif - items: - enum: - fsl,imx6sl-lcdif @@ -88,7 +89,9 @@ allOf: properties: compatible: contains: - const: fsl,imx8mp-lcdif + enum: + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: properties: clocks: @@ -107,6 +110,7 @@ allOf: enum: - fsl,imx6sx-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: properties: clocks: @@ -123,6 +127,7 @@ allOf: - fsl,imx8mm-lcdif - fsl,imx8mn-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: required: - power-domains diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 92741486c24d..7fd42c8fdc32 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: - mediatek,mt2712-disp-aal + - mediatek,mt6795-disp-aal - const: mediatek,mt8173-disp-aal - items: - enum: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index d0ea77fc4b06..f21e44092043 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -33,6 +33,7 @@ properties: - const: mediatek,mt2701-disp-color - items: - enum: + - mediatek,mt6795-disp-color - mediatek,mt8183-disp-color - mediatek,mt8186-disp-color - mediatek,mt8188-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index d976380801e3..803c00f26206 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -17,15 +17,20 @@ description: | properties: compatible: - enum: - - mediatek,mt2701-dpi - - mediatek,mt7623-dpi - - mediatek,mt8173-dpi - - mediatek,mt8183-dpi - - mediatek,mt8186-dpi - - mediatek,mt8188-dp-intf - - mediatek,mt8192-dpi - - mediatek,mt8195-dp-intf + oneOf: + - enum: + - mediatek,mt2701-dpi + - mediatek,mt7623-dpi + - mediatek,mt8173-dpi + - mediatek,mt8183-dpi + - mediatek,mt8186-dpi + - mediatek,mt8188-dp-intf + - mediatek,mt8192-dpi + - mediatek,mt8195-dp-intf + - items: + - enum: + - mediatek,mt6795-dpi + - const: mediatek,mt8183-dpi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 4707b60238b0..12441b937684 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -22,13 +22,18 @@ allOf: properties: compatible: - enum: - - mediatek,mt2701-dsi - - mediatek,mt7623-dsi - - mediatek,mt8167-dsi - - mediatek,mt8173-dsi - - mediatek,mt8183-dsi - - mediatek,mt8186-dsi + oneOf: + - enum: + - mediatek,mt2701-dsi + - mediatek,mt7623-dsi + - mediatek,mt8167-dsi + - mediatek,mt8173-dsi + - mediatek,mt8183-dsi + - mediatek,mt8186-dsi + - items: + - enum: + - mediatek,mt6795-dsi + - const: mediatek,mt8173-dsi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index 6c2be9d6840b..c6641acd75d6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -26,6 +26,10 @@ properties: - mediatek,mt8183-disp-gamma - items: - enum: + - mediatek,mt6795-disp-gamma + - const: mediatek,mt8173-disp-gamma + - items: + - enum: - mediatek,mt8186-disp-gamma - mediatek,mt8188-disp-gamma - mediatek,mt8192-disp-gamma diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index 2f8e2f4dc3b8..eead5cb8636e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -24,6 +24,9 @@ properties: - enum: - mediatek,mt8173-disp-merge - mediatek,mt8195-disp-merge + - items: + - const: mediatek,mt6795-disp-merge + - const: mediatek,mt8173-disp-merge reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml index 29f9fa8f8219..831c653caffd 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml @@ -24,6 +24,9 @@ properties: - enum: - mediatek,mt2712-disp-od - mediatek,mt8173-disp-od + - items: + - const: mediatek,mt6795-disp-od + - const: mediatek,mt8173-disp-od reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 92e320d54ba2..3e1069b00b56 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -33,6 +33,10 @@ properties: - const: mediatek,mt2701-disp-ovl - items: - enum: + - mediatek,mt6795-disp-ovl + - const: mediatek,mt8173-disp-ovl + - items: + - enum: - mediatek,mt8188-disp-ovl - mediatek,mt8195-disp-ovl - const: mediatek,mt8183-disp-ovl diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index 42059efad45d..39dbb5c8bcf8 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -39,6 +39,10 @@ properties: - const: mediatek,mt2701-disp-rdma - items: - enum: + - mediatek,mt6795-disp-rdma + - const: mediatek,mt8173-disp-rdma + - items: + - enum: - mediatek,mt8186-disp-rdma - mediatek,mt8192-disp-rdma - const: mediatek,mt8183-disp-rdma diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index 21a4e96ecd93..a8a5c9608598 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -23,6 +23,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-split + - items: + - const: mediatek,mt6795-disp-split + - const: mediatek,mt8173-disp-split reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml index 62fad23a26f5..39e3e2d4a0db 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml @@ -24,6 +24,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-ufoe + - items: + - const: mediatek,mt6795-disp-ufoe + - const: mediatek,mt8173-disp-ufoe reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml index 991183165d29..a3a2b71a4523 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml @@ -23,6 +23,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-wdma + - items: + - const: mediatek,mt6795-disp-wdma + - const: mediatek,mt8173-disp-wdma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index f0c2237d5f82..7a7cf3fb3e6d 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -29,6 +29,7 @@ properties: - items: - enum: - qcom,sm8450-dp + - qcom,sm8550-dp - const: qcom,sm8350-dp reg: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e6c1ebfe8a32..01848bdd5873 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - qcom,apq8064-dsi-ctrl + - qcom,msm8226-dsi-ctrl - qcom,msm8916-dsi-ctrl - qcom,msm8953-dsi-ctrl - qcom,msm8974-dsi-ctrl @@ -26,6 +27,8 @@ properties: - qcom,sdm660-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6350-dsi-ctrl + - qcom,sm6375-dsi-ctrl - qcom,sm8150-dsi-ctrl - qcom,sm8250-dsi-ctrl - qcom,sm8350-dsi-ctrl @@ -82,6 +85,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links. + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + assigned-clocks: minItems: 2 maxItems: 4 @@ -244,6 +259,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-dsi-ctrl - qcom,msm8974-dsi-ctrl then: properties: @@ -285,6 +301,7 @@ allOf: contains: enum: - qcom,msm8998-dsi-ctrl + - qcom,sm6350-dsi-ctrl then: properties: clocks: @@ -352,6 +369,7 @@ allOf: enum: - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6375-dsi-ctrl then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index cf4a338c4661..62fb3e484eb2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -15,10 +15,11 @@ allOf: properties: compatible: enum: + - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-8960 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - - qcom,dsi-phy-28nm-8960 reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 029d72822d8b..d65926b4f054 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -19,16 +19,18 @@ description: | properties: compatible: - items: - - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' - - const: qcom,adreno-gmu + oneOf: + - items: + - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' + - const: qcom,adreno-gmu + - const: qcom,adreno-gmu-wrapper reg: - minItems: 3 + minItems: 1 maxItems: 4 reg-names: - minItems: 3 + minItems: 1 maxItems: 4 clocks: @@ -44,7 +46,6 @@ properties: - description: GMU HFI interrupt - description: GMU interrupt - interrupt-names: items: - const: hfi @@ -72,14 +73,8 @@ required: - compatible - reg - reg-names - - clocks - - clock-names - - interrupts - - interrupt-names - power-domains - power-domain-names - - iommus - - operating-points-v2 additionalProperties: false @@ -122,6 +117,7 @@ allOf: contains: enum: - qcom,adreno-gmu-635.0 + - qcom,adreno-gmu-660.1 then: properties: reg: @@ -217,6 +213,28 @@ allOf: - const: axi - const: memnoc + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-wrapper + then: + properties: + reg: + items: + - description: GMU wrapper register space + reg-names: + items: + - const: gmu + else: + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - operating-points-v2 + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> @@ -225,7 +243,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0x506a000 0x30000>, <0xb280000 0x10000>, @@ -249,3 +267,12 @@ examples: iommus = <&adreno_smmu 5>; operating-points-v2 = <&gmu_opp_table>; }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0596a000 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 5dabe7b6794b..58ca8912a8c3 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -36,10 +36,7 @@ properties: reg-names: minItems: 1 - items: - - const: kgsl_3d0_reg_memory - - const: cx_mem - - const: cx_dbgc + maxItems: 3 interrupts: maxItems: 1 @@ -157,16 +154,62 @@ allOf: required: - clocks - clock-names + - if: properties: compatible: contains: - pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' - - then: # Since Adreno 6xx series clocks should be defined in GMU + enum: + - qcom,adreno-610.0 + - qcom,adreno-619.1 + then: properties: - clocks: false - clock-names: false + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gmu + description: CX GMU clock + - const: xo + description: GPUCC clocksource clock + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_dbgc + + required: + - clocks + - clock-names + else: + if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Starting with A6xx, the clocks are usually defined in the GMU node + properties: + clocks: false + clock-names: false + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index a763cf8da122..2fe032d0e8f8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: - qcom,apq8084-mdp5 + - qcom,msm8226-mdp5 - qcom,msm8916-mdp5 - qcom,msm8917-mdp5 - qcom,msm8953-mdp5 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index b0100105e428..db9f07c6142d 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -125,6 +125,7 @@ patternProperties: - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-8226 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-lp - qcom,hdmi-phy-8084 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index 1fb8321d9ee8..630b11480496 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -13,7 +13,10 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sc7180-dpu + enum: + - qcom,sc7180-dpu + - qcom,sm6350-dpu + - qcom,sm6375-dpu reg: items: @@ -26,6 +29,7 @@ properties: - const: vbif clocks: + minItems: 6 items: - description: Display hf axi clock - description: Display ahb clock @@ -33,8 +37,10 @@ properties: - description: Display lut clock - description: Display core clock - description: Display vsync clock + - description: Display core throttle clock clock-names: + minItems: 6 items: - const: bus - const: iface @@ -42,6 +48,7 @@ properties: - const: lut - const: core - const: vsync + - const: throttle required: - compatible @@ -52,6 +59,20 @@ required: unevaluatedProperties: false +allOf: + - if: + properties: + compatible: + const: qcom,sm6375-dpu + + then: + properties: + clocks: + minItems: 7 + + clock-names: + minItems: 7 + examples: - | #include <dt-bindings/clock/qcom,dispcc-sc7180.h> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml new file mode 100644 index 000000000000..ed0ad194d4ce --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6350-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6350.h> + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm6350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM6350_MX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml new file mode 100644 index 000000000000..76369a4f7c4d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6375 Display MDSS + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: + SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6375-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6375-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6375-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6375-dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,sm6375-gcc.h> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6375-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6375-dpu"; + reg = <0x05e01000 0x8e030>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6375_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6375_VDDMX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,sm6375-dsi-phy-7nm"; + reg = <0x05e94400 0x200>, + <0x05e94600 0x280>, + <0x05e94900 0x264>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 4d94dbff3054..79a226e4cc6a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -64,7 +64,7 @@ patternProperties: type: object properties: compatible: - const: qcom,dsi-phy-5nm-8350 + const: qcom,sm8350-dsi-phy-5nm unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index aed55608ebf6..906ef62709b8 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -32,6 +32,10 @@ properties: - innolux,hj110iz-01a # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel - starry,2081101qfh032011-53g + # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel + - starry,himax83102-j02 + # STARRY ili9882t 10.51" WUXGA TFT LCD panel + - starry,ili9882t reg: description: the virtual channel number of a DSI peripheral diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index 0039561ef04c..5f7e4c486094 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -19,11 +19,16 @@ allOf: properties: compatible: - items: - - enum: - - xiaomi,elish-boe-nt36523 - - xiaomi,elish-csot-nt36523 - - const: novatek,nt36523 + oneOf: + - items: + - enum: + - xiaomi,elish-boe-nt36523 + - xiaomi,elish-csot-nt36523 + - const: novatek,nt36523 + - items: + - enum: + - lenovo,j606f-boe-nt36523w + - const: novatek,nt36523w reset-gpios: maxItems: 1 @@ -34,6 +39,7 @@ properties: reg: true ports: true + rotation: true backlight: true required: diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index 9b701df5e9d2..2f0238b770eb 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -67,6 +67,7 @@ properties: items: - enum: - sainsmart18 + - shineworld,lh133k - const: panel-mipi-dbi-spi write-only: @@ -86,6 +87,8 @@ properties: Logic level supply for interface signals (Vddi). No need to set if this is the same as power-supply. + spi-3wire: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 01560fe226dd..1d4936fc5182 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -33,6 +33,8 @@ properties: - ampire,am-1280800n3tzqw-t00h # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel + - ampire,am-800480l1tmqw-t00h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - ampire,am800480r3tmqwa1h # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel @@ -77,6 +79,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel + - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - boe,hv070wsa-100 # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel @@ -174,6 +178,8 @@ properties: - innolux,at043tn24 # Innolux AT070TN92 7.0" WQVGA TFT LCD panel - innolux,at070tn92 + # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070ace-l01 # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - innolux,g070y2-l01 # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel @@ -280,6 +286,8 @@ properties: - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel - rocktech,rk070er9427 + # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel + - rocktech,rk043fn48h # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel - samsung,atna33xc20 # Samsung 12.2" (2560x1600 pixels) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 09b5eb7542f8..150e81090af2 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -20,6 +20,8 @@ allOf: properties: compatible: enum: + # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel + - anbernic,rg353v-panel-v2 # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel - rocktech,jh057n00900 # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml new file mode 100644 index 000000000000..45a236d2cc70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller + +maintainers: + - Artur Weber <aweber.kernel@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # 1280x800 LSL080AL02 panel + - samsung,lsl080al02 + # 1024x768 LSL080AL03 panel + - samsung,lsl080al03 + # 1024x768 LTL101AT01 panel + - samsung,ltl101at01 + - const: samsung,s6d7aa0 + + reg: true + + backlight: + description: + Backlight to use for the panel. If this property is set on panels + that have DSI-based backlight control (LSL080AL03 and LTL101AT01), + it overrides the DSI-based backlight. + + reset-gpios: + description: Reset GPIO pin, usually GPIO_ACTIVE_LOW. + + power-supply: + description: + Main power supply for the panel; the exact voltage differs between + panels, and is usually somewhere around 3.3-5v. + + vmipi-supply: + description: VMIPI supply, usually 1.8v. + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,lsl080al02", "samsung,s6d7aa0"; + reg = <0>; + power-supply = <&display_3v3_supply>; + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 1cdc91b3439f..200fbf1c74a0 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -74,7 +74,7 @@ examples: vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; panel-width-mm = <58>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index 6f43d885c9b3..df61cb5f5c54 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -121,11 +121,11 @@ examples: #size-cells = <0>; vopb_out_edp: endpoint@0 { reg = <0>; - remote-endpoint=<&edp_in_vopb>; + remote-endpoint = <&edp_in_vopb>; }; vopb_out_hdmi: endpoint@1 { reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; + remote-endpoint = <&hdmi_in_vopb>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index c488308d7be1..53560052aaf0 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -74,8 +74,6 @@ properties: - const: 2 required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml index a42bf33d1e7d..2181855a0920 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml @@ -73,6 +73,18 @@ properties: avdd-dsi-csi-supply: description: DSI/CSI power supply. Must supply 1.2 V. + vip: + $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input from the VIP (parallel input capture) module + patternProperties: "^csi@[0-9a-f]+$": type: object @@ -108,6 +120,22 @@ examples: #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&vi_vip_in>; + }; + }; + }; + }; + vi@54080000 { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; @@ -115,6 +143,37 @@ examples: clocks = <&tegra_car TEGRA20_CLK_VI>; resets = <&tegra_car 100>; reset-names = "vi"; + + vip { + compatible = "nvidia,tegra20-vip"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_vip_in: endpoint { + remote-endpoint = <&mt9v111_out>; + }; + }; + port@1 { + reg = <1>; + vi_vip_out: endpoint { + remote-endpoint = <&vi_in>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_in: endpoint { + remote-endpoint = <&vi_vip_out>; + }; + }; + }; }; - | diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml new file mode 100644 index 000000000000..14294edb8d8c --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra VIP (parallel video capture) controller + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +properties: + compatible: + enum: + - nvidia,tegra20-vip + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port receiving the video stream from the sensor + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port sending the video stream to the VI + + required: + - port@0 + - port@1 + +unevaluatedProperties: false + +required: + - compatible + - ports + +# see nvidia,tegra20-vi.yaml for an example diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml index 64845347f44d..1e5752b19a49 100644 --- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml +++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml @@ -112,14 +112,23 @@ properties: - const: stericsson,dma40 reg: - items: - - description: DMA40 memory base - - description: LCPA memory base + oneOf: + - items: + - description: DMA40 memory base + - items: + - description: DMA40 memory base + - description: LCPA memory base, deprecated, use eSRAM pool instead + deprecated: true + reg-names: - items: - - const: base - - const: lcpa + oneOf: + - items: + - const: base + - items: + - const: base + - const: lcpa + deprecated: true interrupts: maxItems: 1 @@ -127,6 +136,15 @@ properties: clocks: maxItems: 1 + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A phandle array with inner size 1 (no arg cells). + First phandle is the LCPA (Logical Channel Parameter Address) memory. + Second phandle is the LCLA (Logical Channel Link base Address) memory. + maxItems: 2 + items: + maxItems: 1 + memcpy-channels: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of u32 elements indicating which channels on the DMA @@ -138,6 +156,7 @@ required: - reg - interrupts - clocks + - sram - memcpy-channels additionalProperties: false @@ -149,8 +168,9 @@ examples: #include <dt-bindings/mfd/dbx500-prcmu.h> dma-controller@801c0000 { compatible = "stericsson,db8500-dma40", "stericsson,dma40"; - reg = <0x801c0000 0x1000>, <0x40010000 0x800>; - reg-names = "base", "lcpa"; + reg = <0x801c0000 0x1000>; + reg-names = "base"; + sram = <&lcpa>, <&lcla>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <3>; memcpy-channels = <56 57 58 59 60>; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index beecfe7a1732..4ca300a42a99 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -33,6 +33,7 @@ properties: enum: - ti,am62a-dmss-bcdma-csirx - ti,am64-dmss-bcdma + - ti,j721s2-dmss-bcdma-csi reg: minItems: 3 @@ -151,7 +152,12 @@ allOf: required: - power-domains - else: + - if: + properties: + compatible: + contains: + const: ti,am64-dmss-bcdma + then: properties: reg: minItems: 5 @@ -168,6 +174,28 @@ allOf: - ti,sci-rm-range-bchan - ti,sci-rm-range-tchan + - if: + properties: + compatible: + contains: + const: ti,j721s2-dmss-bcdma-csi + then: + properties: + ti,sci-rm-range-bchan: false + + reg: + maxItems: 4 + + reg-names: + items: + - const: gcfg + - const: rchanrt + - const: tchanrt + - const: ringrt + + required: + - ti,sci-rm-range-tchan + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml index d6cbd95ec26d..2128f4645c98 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml @@ -41,6 +41,9 @@ properties: clock-names: const: axi_clk + power-domains: + maxItems: 1 + required: - "#dma-cells" - compatible @@ -48,12 +51,14 @@ required: - interrupts - clocks - clock-names + - power-domains additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> dma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; @@ -63,6 +68,7 @@ examples: clocks = <&dpdma_clk>; clock-names = "axi_clk"; #dma-cells = <1>; + power-domains = <&zynqmp_firmware PD_DP>; }; ... diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml index 1dcb85a02a76..cc930660b794 100644 --- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml +++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml @@ -42,7 +42,7 @@ properties: enum: [ 0, 1 ] performance-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array description: A phandle and performance domain specifier as defined by bindings of the performance controller/provider specified by phandle. diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 11e2a95a7bcb..0e31bb36ebb1 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -33,6 +33,7 @@ properties: - microchip,25lc040 - st,m95m02 - st,m95256 + - st,m95640 - cypress,fm25 - const: atmel,at25 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index f4eec4c42fb3..a41f9b9a196b 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -52,8 +52,7 @@ properties: - vendor,soc4-ip - vendor,soc3-ip - vendor,soc2-ip - - enum: - - vendor,soc1-ip + - const: vendor,soc1-ip # additionalItems being false is implied # minItems/maxItems equal to 2 is implied - items: @@ -85,6 +84,9 @@ properties: discouraged. clock-names: + # For single-entry lists in clocks, resets etc., the xxx-names often do not + # bring any value, especially if they copy the IP block name. In such case + # just skip the xxx-names. items: - const: bus diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml index 6a9c96f0352a..2c8cf6aab19a 100644 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -27,10 +27,14 @@ properties: interrupt-names: minItems: 1 - items: - - const: usb_id - - const: usb_vbus - + anyOf: + - items: + - const: usb_id + - const: usb_vbus + - items: + - const: usb_id + - items: + - const: usb_vbus required: - compatible - reg @@ -49,7 +53,7 @@ examples: interrupt-controller; #interrupt-cells = <4>; - usb_id: misc@900 { + usb_id: usb-detect@900 { compatible = "qcom,pm8941-misc"; reg = <0x900>; interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index efdf59abb2e1..351b202d0e10 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -23,7 +23,7 @@ properties: headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it to HPDETR. If this node is not included or if the value is unknown, then headphone detection mode is set to HPDETL. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 2 @@ -51,7 +51,7 @@ properties: description: Additional software microphone detection debounce specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 wlf,micd-pol-gpio: description: @@ -63,7 +63,7 @@ properties: description: Time allowed for MICBIAS to startup prior to performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 12 @@ -71,7 +71,7 @@ properties: description: Delay between successive microphone detection measurements, specified as per the ARIZONA_MICD_TIME_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 12 @@ -79,7 +79,7 @@ properties: description: Microphone detection hardware debounces specified as the number of measurements to take. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4] wlf,micd-timeout-ms: @@ -97,7 +97,7 @@ properties: CTIA / OMTP headsets), the field can be of variable length but should always be a multiple of 3 cells long, each three cell group represents one polarity configuration. - $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: - description: @@ -119,7 +119,7 @@ properties: description: Settings for the general purpose switch, set as one of the ARIZONA_GPSW_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 5824c43e9893..b138f3d23df8 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -34,6 +34,10 @@ properties: - description: SCMI compliant firmware with ARM SMC/HVC transport items: - const: arm,scmi-smc + - description: SCMI compliant firmware with ARM SMC/HVC transport + with shmem address(4KB-page, offset) as parameters + items: + - const: arm,scmi-smc-param - description: SCMI compliant firmware with SCMI Virtio transport. The virtio transport only supports a single device. items: @@ -214,7 +218,7 @@ properties: patternProperties: '^regulator@[0-9a-f]+$': type: object - $ref: "../regulator/regulator.yaml#" + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false properties: @@ -299,7 +303,9 @@ else: properties: compatible: contains: - const: arm,scmi-smc + enum: + - arm,scmi-smc + - arm,scmi-smc-param then: required: - arm,smc-id diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml new file mode 100644 index 000000000000..684b15ba9ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family Secure Monitor bounce buffer + +description: + A bounce buffer used for non-secure to secure communications. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-smc + - brcm,bcm21664-smc + - brcm,bcm23550-smc + - const: brcm,kona-smc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smc@3404c000 { + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; + reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ + }; +... diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 367d04ad1923..bdbee58a542b 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -51,6 +51,7 @@ properties: - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 + - qcom,scm-sdx75 - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 @@ -71,6 +72,8 @@ properties: minItems: 1 maxItems: 3 + dma-coherent: true + interconnects: maxItems: 1 diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index f14f7b454f07..910bebe6cfa8 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx firmware driver maintainers: - - Nava kishore Manne <nava.manne@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: The zynqmp-firmware node describes the interface to platform firmware. ZynqMP has an interface to communicate with secure firmware. diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml index 4fb05eb84e2a..164331eb6275 100644 --- a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Lattice Slave SPI sysCONFIG FPGA manager maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: | Lattice sysCONFIG port, which is used for FPGA configuration, among others, diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index 527532f039ce..a157eecfb5fc 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Polarfire FPGA manager. maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml index f47b6140a742..04dcadc2c20e 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq FPGA Manager maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml index ac6a207278d5..26f18834caa3 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Versal FPGA driver. maintainers: - - Nava kishore Manne <nava.manne@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: | Device Tree Versal FPGA bindings for the Versal SoC, controlled diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml index 00a8d92ff736..1390ae103b0b 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Ultrascale MPSoC FPGA Manager maintainers: - - Nava kishore Manne <navam@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: | Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager. diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml index 4d69f79df859..62fcc2bd5d80 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# +$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6345 GPIO controller +title: Broadcom BCM63xx GPIO controller maintainers: - Ãlvaro Fernández Rojas <noltari@gmail.com> @@ -18,8 +18,6 @@ description: |+ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. - BCM6345 have 16-bit data and dirout registers, where GPIO state can be read - and/or written, and the direction changed from input to output. BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. @@ -29,7 +27,6 @@ properties: enum: - brcm,bcm6318-gpio - brcm,bcm6328-gpio - - brcm,bcm6345-gpio - brcm,bcm6358-gpio - brcm,bcm6362-gpio - brcm,bcm6368-gpio @@ -64,17 +61,6 @@ additionalProperties: false examples: - | - gpio@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - gpio-controller; - #gpio-cells = <2>; - }; - - - | gpio@0 { compatible = "brcm,bcm63268-gpio"; reg-names = "dirout", "dat"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml new file mode 100644 index 000000000000..1cebc4058e27 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO delay controller + +maintainers: + - Alexander Stein <linux@ew.tq-group.com> + +description: | + This binding describes an electrical setup where setting an GPIO output + is delayed by some external setup, e.g. RC circuit. + + +----------+ +-----------+ + | | VCC_B | | + | | | | | + | | VCC_A _ | | + | GPIO | | | R | Consumer | + |controller| ___ |_| | | + | | | | | | | + | [IOx|-------| |--+-----|-----+ | + | | |___| | | input | + | | | | | + +----------+ --- C +-----------+ + --- + | + - + GND + + If the input on the consumer is controlled by an open-drain signal + attached to an RC circuit the ramp-up delay is not under control + of the GPIO controller. + +properties: + compatible: + const: gpio-delay + + "#gpio-cells": + description: | + Specifies the pin, ramp-up and ramp-down delays. The + delays are specified in microseconds. + const: 3 + + gpios: + description: Array of GPIOs which output signal change is delayed + minItems: 1 + maxItems: 32 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + enable_delay: enable-delay { + compatible = "gpio-delay"; + #gpio-cells = <3>; + gpio-controller; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>, + <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + consumer { + enable-gpios = <&enable_delay 0 130000 30000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml new file mode 100644 index 000000000000..daadfb4926c3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EP93xx GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + - Nikita Shubin <nikita.shubin@maquefel.me> + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-gpio + - items: + - enum: + - cirrus,ep9302-gpio + - cirrus,ep9307-gpio + - cirrus,ep9312-gpio + - cirrus,ep9315-gpio + - const: cirrus,ep9301-gpio + + reg: + minItems: 2 + items: + - description: data register + - description: direction register + - description: interrupt registers base + + reg-names: + minItems: 2 + items: + - const: data + - const: dir + - const: intr + + gpio-controller: true + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + oneOf: + - maxItems: 1 + - description: port F has dedicated irq line for each gpio line + maxItems: 8 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@80840000 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840000 0x04>, + <0x80840010 0x04>, + <0x80840090 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840004 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840004 0x04>, + <0x80840014 0x04>, + <0x808400ac 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840008 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840008 0x04>, + <0x80840018 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@8084000c { + compatible = "cirrus,ep9301-gpio"; + reg = <0x8084000c 0x04>, + <0x8084001c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840020 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840020 0x04>, + <0x80840024 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840030 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840030 0x04>, + <0x80840034 0x04>, + <0x8084004c 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupts-extended = <&vic0 19>, <&vic0 20>, + <&vic0 21>, <&vic0 22>, + <&vic1 15>, <&vic1 16>, + <&vic1 17>, <&vic1 18>; + }; + + gpio@80840038 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840038 0x04>, + <0x8084003c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840040 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840040 0x04>, + <0x80840044 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml new file mode 100644 index 000000000000..b394e058256e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MMIO GPIO + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + +description: + Some simple GPIO controllers may consist of a single data register or a pair + of set/clear-bit registers. Such controllers are common for glue logic in + FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped + NAND-style parallel busses. + +properties: + compatible: + enum: + - brcm,bcm6345-gpio + - ni,169445-nand-gpio + - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller + + big-endian: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + little-endian: true + + reg: + minItems: 1 + description: + A list of registers in the controller. The width of each register is + determined by its size. All registers must have the same width. The number + of GPIOs is set by the width, with bit 0 corresponding to GPIO 0. + items: + - description: + Register to READ the value of the GPIO lines. If GPIO line is high, + the bit will be set. If the GPIO line is low, the bit will be cleared. + This register may also be used to drive GPIOs if the SET register is + omitted. + - description: + Register to SET the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line high. + - description: + Register to CLEAR the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line low. If this register is omitted, + the SET register will be used to clear the GPIO lines as well, by + actively writing the line with 0. + - description: + Register to set the line as OUTPUT. Setting a bit in this register + will turn that line into an output line. Conversely, clearing a bit + will turn that line into an input. + - description: + Register to set this line as INPUT. Setting a bit in this register + will turn that line into an input line. Conversely, clearing a bit + will turn that line into an output. + + reg-names: + minItems: 1 + maxItems: 5 + items: + enum: + - dat + - set + - clr + - dirout + - dirin + + native-endian: true + + no-output: + $ref: /schemas/types.yaml#/definitions/flag + description: + If this property is present, the controller cannot drive the GPIO lines. + +required: + - compatible + - reg + - reg-names + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + gpio@1f300010 { + compatible = "ni,169445-nand-gpio"; + reg = <0x1f300010 0x4>; + reg-names = "dat"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@e0100000 { + compatible = "wd,mbl-gpio"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; + + gpio@fffe0406 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0xfffe0406 2>, <0xfffe040a 2>; + native-endian; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml index 5b0134304e51..452f8972a965 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml @@ -24,6 +24,10 @@ properties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 4 + maxItems: 8 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt deleted file mode 100644 index b33f8f02c0d7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt +++ /dev/null @@ -1,17 +0,0 @@ -STMPE gpio ----------- - -Required properties: - - compatible: "st,stmpe-gpio" - -Optional properties: - - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable - due to different usage (e.g. touch, keypad) - -Node should be child node of stmpe node to which it belongs. - -Example: - stmpe_gpio { - compatible = "st,stmpe-gpio"; - st,norequest-mask = <0x20>; //gpio 5 can't be used - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index d2c39dba56ad..7c2d152e8617 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -61,6 +61,13 @@ properties: gpio-ranges: maxItems: 1 +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml index 572e1718f501..5e2496379a3c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq GPIO controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt deleted file mode 100644 index ca2f8c745a27..000000000000 --- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the National Instruments 169445 GPIO NAND controller - -The 169445 GPIO NAND controller has two memory mapped GPIO registers, one -for input (the ready signal) and one for output (control signals). It is -intended to be used with the GPIO NAND driver. - -Required properties: - - compatible: should be "ni,169445-nand-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: disables driving output on the pins - -Examples: - gpio1: nand-gpio-out@1f300010 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300010 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio2: nand-gpio-in@1f300014 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300014 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml new file mode 100644 index 000000000000..22c0cae73425 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) GPIO Block + +description: + STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. These bindings pertain to the + GPIO portions of these expanders. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: st,stmpe-gpio + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + st,norequest-mask: + description: + A bitmask of GPIO lines that cannot be requested because for + for example not being connected to anything on the system + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + +additionalProperties: false + +required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt deleted file mode 100644 index 038c3a6a1f4d..000000000000 --- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers. - -The Western Digital MyBook Live has two memory-mapped GPIO controllers. -Both GPIO controller only have a single 8-bit data register, where GPIO -state can be read and/or written. - -Required properties: - - compatible: should be "wd,mbl-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: GPIOs are read-only. - -Examples: - gpio0: gpio0@e0000000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0000000 0x1>; - #gpio-cells = <2>; - gpio-controller; - }; - - gpio1: gpio1@e0100000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0100000 0x1>; - #gpio-cells = <2>; - gpio-controller; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 31906c253940..1638cfe90f1c 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -44,6 +44,7 @@ patternProperties: - GPIO0 - GPIO1 - GPIO2 + - GPIO3 function: enum: diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml index f333ee2288e7..c1060e5fcef3 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx AXI GPIO controller maintainers: - - Neeli Srinivas <srinivas.neeli@xilinx.com> + - Neeli Srinivas <srinivas.neeli@amd.com> description: The AXI GPIO design provides a general purpose input/output interface diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 31c0fc345903..18e61aff2185 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -12,7 +12,7 @@ description: PS_MODE). Every pin can be configured as input/output. maintainers: - - Piyush Mehta <piyush.mehta@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0400a361875d..e796a1ff8c82 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -86,7 +86,7 @@ properties: const: 2 dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 2a25384ca3ef..ca02baba5526 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -92,7 +92,7 @@ properties: dma-coherent: true dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index 318122d95eb5..0fae1ef013be 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3228-mali - samsung,exynos4210-mali - stericsson,db8500-mali + - xlnx,zynqmp-mali - const: arm,mali-400 - items: - enum: diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000000..2dc8b07b4d3b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml index cb24d7b3221c..ff57c5416ebc 100644 --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence I2C controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml index 85d9efb743ee..d9ef86729011 100644 --- a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml +++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml @@ -60,6 +60,7 @@ properties: default: 0 regstep: + $ref: /schemas/types.yaml#/definitions/uint32 description: | deprecated, use reg-shift above deprecated: true diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 62f3ca66274f..133855f11b4f 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -10,7 +10,7 @@ maintainers: - Conor Culhane <conor.culhane@silvaco.com> allOf: - - $ref: "i3c.yaml#" + - $ref: i3c.yaml# properties: compatible: @@ -44,7 +44,7 @@ required: - clock-names - clocks -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index d521d516088b..16def2985ab4 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -47,6 +47,9 @@ properties: avdd-supply: description: AVdd voltage supply + vref-supply: + description: VRef voltage supply + adi,rejection-60-Hz-enable: description: | This bit enables a notch at 60 Hz when the first notch of the sinc @@ -89,6 +92,7 @@ required: - interrupts - dvdd-supply - avdd-supply + - vref-supply - spi-cpol - spi-cpha @@ -115,6 +119,7 @@ examples: interrupt-parent = <&gpio>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; + vref-supply = <&vref>; adi,refin2-pins-enable; adi,rejection-60-Hz-enable; diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 7f79a06e76f5..6168b44ea72c 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2712-auxadc - mediatek,mt6765-auxadc - mediatek,mt7622-auxadc + - mediatek,mt7986-auxadc - mediatek,mt8173-auxadc - items: - enum: diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..0a192ca192c5 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index bd6e0d6f6e0c..ad7d6fc49de5 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -54,7 +54,7 @@ required: - '#io-channel-cells' patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": type: object additionalProperties: false description: | @@ -101,7 +101,7 @@ patternProperties: oneOf: - items: - const: 1 - - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ] - items: - const: 10 - const: 81 @@ -148,7 +148,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 512, 1024, 2048, 4096 ] @@ -171,7 +171,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 256, 512, 1024 ] @@ -194,7 +194,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 250, 420, 840 ] @@ -217,7 +217,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 85, 340, 1360 ] @@ -249,7 +249,7 @@ examples: #io-channel-cells = <1>; /* Channel node */ - adc-chan@39 { + channel@39 { reg = <0x39>; qcom,decimation = <512>; qcom,ratiometric; @@ -258,19 +258,19 @@ examples: qcom,pre-scaling = <1 3>; }; - adc-chan@9 { + channel@9 { reg = <0x9>; }; - adc-chan@a { + channel@a { reg = <0xa>; }; - adc-chan@e { + channel@e { reg = <0xe>; }; - adc-chan@f { + channel@f { reg = <0xf>; }; }; @@ -292,16 +292,18 @@ examples: #io-channel-cells = <1>; /* Other properties are omitted */ - xo-therm@44 { + channel@44 { reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "xo_therm"; }; - conn-therm@47 { + channel@47 { reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "conn_therm"; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index 1c7aee5ed3e0..36dff3250ea7 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -90,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index da50b529c157..aa24b841393c 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -15,6 +15,7 @@ properties: - const: rockchip,saradc - const: rockchip,rk3066-tsadc - const: rockchip,rk3399-saradc + - const: rockchip,rk3588-saradc - items: - enum: - rockchip,px30-saradc diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index 9b072b057f16..a60b1e100ee4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -35,7 +35,7 @@ unevaluatedProperties: false examples: - | spi { - #address-cells= <1>; + #address-cells = <1>; #size-cells = <0>; adc@0 { diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index df2589f214e1..dddf97b50549 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -13,7 +13,7 @@ description: | When an io-channel measures the midpoint of a voltage divider, the interesting voltage is often the voltage over the full resistance of the divider. This binding describes the voltage divider in such - a curcuit. + a circuit. Vin ----. | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index ec64d7877fe5..1db6952ddca5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -31,6 +31,9 @@ properties: - invensense,mpu9250 - invensense,mpu9255 - items: + - const: invensense,icm20600 + - const: invensense,icm20602 + - items: - const: invensense,icm20608d - const: invensense,icm20608 diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index b39f5217d8ff..ee8724ad33ab 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -98,6 +98,7 @@ required: - reg allOf: + - $ref: /schemas/iio/iio.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml new file mode 100644 index 000000000000..4f66fd47b016 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27008 color sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear + and IR) with four configurable channels. Red and green being always + available and two out of the rest three (blue, clear, IR) can be + selected to be simultaneously measured. Typical application is adjusting + LCD backlight of TVs, mobile phones and tablet PCs. + +properties: + compatible: + const: rohm,bu27008 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27008"; + reg = <0x38>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml new file mode 100644 index 000000000000..12b0c7ed5d72 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OPT4001 Ambient Light Sensor + +maintainers: + - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com> + +description: + Ambient light sensor with an i2c interface. + Last part of compatible is for the packaging used. + Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT. + https://www.ti.com/lit/gpn/opt4001 + +properties: + compatible: + enum: + - ti,opt4001-picostar + - ti,opt4001-sot-5x3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: ti,opt4001-sot-5x3 + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "ti,opt4001-sot-5x3"; + reg = <0x44>; + vdd-supply = <&vdd_reg>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml new file mode 100644 index 000000000000..ab5c09c00ff4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas X9250 quad potentiometers + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Renesas X9250 integrates four digitally controlled potentiometers. + On each potentiometer, the X9250T has a 100 kOhms total resistance and the + X9250U has a 50 kOhms total resistance. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +properties: + compatible: + enum: + - renesas,x9250t + - renesas,x9250u + + reg: + maxItems: 1 + + vcc-supply: + description: + Regulator for the VCC power supply. + + avp-supply: + description: + Regulator for the analog V+ power supply. + + avn-supply: + description: + Regulator for the analog V- power supply. + + '#io-channel-cells': + const: 1 + + spi-max-frequency: + maximum: 2000000 + + wp-gpios: + maxItems: 1 + description: + GPIO connected to the write-protect pin. + +required: + - compatible + - reg + - vcc-supply + - avp-supply + - avn-supply + - '#io-channel-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + potentiometer@0 { + compatible = "renesas,x9250t"; + reg = <0>; + vcc-supply = <&vcc_regulator>; + avp-supply = <&avp_regulator>; + avn-supply = <&avp_regulator>; + wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + spi-max-frequency = <2000000>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml new file mode 100644 index 000000000000..c0a923febf13 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell mprls0025pa pressure sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Honeywell pressure sensor of model mprls0025pa. + + This sensor has an I2C and SPI interface. Only the I2C interface is + implemented. + + There are many models with different pressure ranges available. The vendor + calls them "mpr series". All of them have the identical programming model and + differ in the pressure range, unit and transfer function. + + To support different models one need to specify the pressure range as well as + the transfer function. Pressure range needs to be converted from its unit to + pascal. + + The transfer function defines the ranges of numerical values delivered by the + sensor. The minimal range value stands for the minimum pressure and the + maximum value also for the maximum pressure with linear relation inside the + range. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ + products/sensors/pressure-sensors/board-mount-pressure-sensors/ + micropressure-mpr-series/documents/ + sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + +properties: + compatible: + const: honeywell,mprls0025pa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Optional GPIO for resetting the device. + If not present the device is not resetted during the probe. + maxItems: 1 + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by the + sensor. + 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) + 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) + 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + - honeywell,pmin-pascal + - honeywell,pmax-pascal + - honeywell,transfer-function + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@18 { + compatible = "honeywell,mprls0025pa"; + reg = <0x18>; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <172369>; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index 1ff3afca9149..e450821a741d 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -84,6 +84,7 @@ properties: - st,lps35hw - description: IMUs enum: + - st,lsm303d-imu - st,lsm9ds0-imu - description: Deprecated bindings enum: diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml index d6965a0c1cf3..654d31f65d36 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Melexis MLX90614 contactless IR temperature sensor +title: Melexis MLX90614/MLX90615 contactless IR temperature sensor maintainers: - Peter Meerwald <pmeerw@pmeerw.net> @@ -15,7 +15,9 @@ description: | properties: compatible: - const: melexis,mlx90614 + enum: + - melexis,mlx90614 + - melexis,mlx90615 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml new file mode 100644 index 000000000000..d43002b9bfdc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMP006 IR thermopile sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package. + https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf + +properties: + compatible: + const: ti,tmp006 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + temperature-sensor@40 { + compatible = "ti,tmp006"; + reg = <0x40>; + vdd-supply = <&ldo4_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 3ec579d63570..c40799355ed7 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -14,6 +14,9 @@ description: | Atmel maXTouch touchscreen or touchpads such as the mXT244 and similar devices. +allOf: + - $ref: input.yaml# + properties: compatible: const: atmel,maxtouch @@ -60,6 +63,10 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + linux,keycodes: + minItems: 1 + maxItems: 8 + atmel,wakeup-method: $ref: /schemas/types.yaml#/definitions/uint32 description: | diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt deleted file mode 100644 index d3db65916a36..000000000000 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Cypress I2C Touchpad - -Required properties: -- compatible: must be "cypress,cyapa". -- reg: I2C address of the chip. -- interrupts: interrupt to which the chip is connected (see interrupt - binding[0]). - -Optional properties: -- wakeup-source: touchpad can be used as a wakeup source. -- pinctrl-names: should be "default" (see pinctrl binding [1]). -- pinctrl-0: a phandle pointing to the pin settings for the device (see - pinctrl binding [1]). -- vcc-supply: a phandle for the regulator supplying 3.3V power. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - &i2c0 { - /* ... */ - - /* Cypress Gen3 touchpad */ - touchpad@67 { - compatible = "cypress,cyapa"; - reg = <0x67>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* Cypress Gen5 and later touchpad */ - touchpad@24 { - compatible = "cypress,cyapa"; - reg = <0x24>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml new file mode 100644 index 000000000000..29515151abe9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: cypress,cyapa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + description: 3.3V power + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + trackpad@67 { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index ce18d7dadae2..1edad1da1196 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -43,6 +43,15 @@ properties: itself as long as it allows the main board to make signals compatible with what the touchscreen is expecting for its IO rails. + goodix,no-reset-during-suspend: + description: + Set this to true to enforce the driver to not assert the reset GPIO + during suspend. + Due to potential touchscreen hardware flaw, back-powering could happen in + suspend if the power supply is on and with active-low reset GPIO asserted. + This property is used to avoid the back-powering issue. + type: boolean + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml index 037c3ae9f1c3..e34c9e78d38d 100644 --- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -55,7 +55,7 @@ patternProperties: interrupt-names: true - linux-keycodes: + linux,keycodes: maxItems: 1 wakeup-source: true diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml index d32716c604fe..6398534b43c3 100644 --- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml @@ -32,6 +32,8 @@ properties: minItems: 1 maxItems: 2 + enable-gpios: true + vcc-supply: true direction-duty-cycle-ns: diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml index 1959ec394768..4080422a9eb5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -40,6 +40,8 @@ properties: linux,keycodes: description: EV_ABS specific event code generated by the axis. + wakeup-source: true + patternProperties: "^button@[0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index f7a5e31c506e..fc21fe3e7b37 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -51,7 +51,7 @@ properties: type: object fsl,ddrc: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to DDR Controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt deleted file mode 100644 index bde63f8f090e..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ /dev/null @@ -1,38 +0,0 @@ -Amlogic meson GPIO interrupt controller - -Meson SoCs contains an interrupt controller which is able to watch the SoC -pads and generate an interrupt on edge or level. The controller is essentially -a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge -or level and polarity. It does not expose all 256 mux inputs because the -documentation shows that the upper part is not mapped to any pad. The actual -number of interrupt exposed depends on the SoC. - -Required properties: - -- compatible : must have "amlogic,meson8-gpio-intc" and either - "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or - "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or - "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or - "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) - "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) - "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) - "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3) - "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L) - "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2) -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value must be 2. -- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These - are the hwirqs used on the parent interrupt controller. - -Example: - -gpio_interrupt: interrupt-controller@9880 { - compatible = "amlogic,meson-gxbb-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x9880 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - meson,channel-interrupts = <64 65 66 67 68 69 70 71>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml new file mode 100644 index 000000000000..e84e4f33b358 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GPIO interrupt controller + +maintainers: + - Heiner Kallweit <hkallweit1@gmail.com> + +description: | + Meson SoCs contains an interrupt controller which is able to watch the SoC + pads and generate an interrupt on edge or level. The controller is essentially + a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select + edge or level and polarity. It does not expose all 256 mux inputs because the + documentation shows that the upper part is not mapped to any pad. The actual + number of interrupts exposed depends on the SoC. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-gpio-intc + - items: + - enum: + - amlogic,meson8-gpio-intc + - amlogic,meson8b-gpio-intc + - amlogic,meson-gxbb-gpio-intc + - amlogic,meson-gxl-gpio-intc + - amlogic,meson-axg-gpio-intc + - amlogic,meson-g12a-gpio-intc + - amlogic,meson-sm1-gpio-intc + - amlogic,meson-a1-gpio-intc + - amlogic,meson-s4-gpio-intc + - const: amlogic,meson-gpio-intc + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + amlogic,channel-interrupts: + description: Array with the upstream hwirq numbers + minItems: 8 + maxItems: 12 + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - amlogic,channel-interrupts + +additionalProperties: false + +examples: + - | + interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x9880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 92117261e1e1..39e64c7f6360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -166,6 +166,12 @@ properties: resets: maxItems: 1 + mediatek,broken-save-restore-fw: + type: boolean + description: + Asserts that the firmware on this device has issues saving and restoring + GICR registers when the GIC redistributors are powered off. + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml new file mode 100644 index 000000000000..393c128a41d8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson Extended I/O Interrupt Controller + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: | + This interrupt controller is found on the Loongson-3 family chips and + Loongson-2K series chips and is used to distribute interrupts directly to + individual cores without forwarding them through the HT's interrupt line. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - loongson,ls2k0500-eiointc + - loongson,ls2k2000-eiointc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x1fe10000 0x10000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml index 50003880ee6f..d56ba65b17d1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml# +$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip External Interrupt Controller diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml new file mode 100644 index 000000000000..0fa952a9edfd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink SoCs Interrupt Controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: + This interrupt controller support a central point for interrupt aggregation + for platform related blocks. + +properties: + compatible: + const: ralink,rt2880-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@200 { + compatible = "ralink,rt2880-intc"; + reg = <0x200 0x100>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index f75736a061af..dc1f28e55266 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -57,14 +57,15 @@ properties: - const: andestech,nceplic100 - items: - enum: + - canaan,k210-plic - sifive,fu540-c000-plic - starfive,jh7100-plic - starfive,jh7110-plic - - canaan,k210-plic - const: sifive,plic-1.0.0 - items: - enum: - allwinner,sun20i-d1-plic + - thead,th1520-plic - const: thead,c900-plic - items: - const: sifive,plic-1.0.0 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index ba677d401e24..3a31a979709b 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -29,6 +29,7 @@ properties: - qcom,msm8996-smmu-v2 - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 + - qcom,sm6375-smmu-v2 - const: qcom,smmu-v2 - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" @@ -45,6 +46,7 @@ properties: - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 - qcom,sdx65-smmu-500 + - qcom,sdx75-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm6350-smmu-500 @@ -79,7 +81,9 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm8150-smmu-500 @@ -267,6 +271,7 @@ allOf: enum: - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 + - qcom,sm6375-smmu-v2 then: anyOf: - properties: @@ -331,7 +336,10 @@ allOf: properties: compatible: contains: - const: qcom,sc7280-smmu-500 + enum: + - qcom,sa8775p-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 then: properties: clock-names: @@ -413,10 +421,8 @@ allOf: - nvidia,smmu-500 - qcom,qcm2290-smmu-500 - qcom,qdu1000-smmu-500 - - qcom,sa8775p-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc8180x-smmu-500 - - qcom,sc8280xp-smmu-500 - qcom,sdm670-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml new file mode 100644 index 000000000000..feb5febaf361 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AWINIC AW200XX LED + +maintainers: + - Martin Kurbanov <mmkurbanov@sberdevices.ru> + +description: | + This controller is present on AW20036/AW20054/AW20072. + It is a 3x12/6x9/6x12 matrix LED programmed via + an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs, + 3 pattern controllers for auto breathing or group dimming control. + + For more product information please see the link below: + aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs + aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs + aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs + +properties: + compatible: + enum: + - awinic,aw20036 + - awinic,aw20054 + - awinic,aw20072 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + awinic,display-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Leds matrix size + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + LED number + maxItems: 1 + + led-max-microamp: + default: 9780 + description: | + Note that a driver will take the minimum of all LED limits + since the chip has a single global setting. + The maximum output current of each LED is calculated by the + following formula: + IMAXled = 160000 * (592 / 600.5) * (1 / display-rows) + And the minimum output current formula: + IMINled = 3300 * (592 / 600.5) * (1 / display-rows) + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - awinic,display-rows + +allOf: + - if: + properties: + compatible: + contains: + const: awinic,aw20036 + then: + properties: + awinic,display-rows: + enum: [1, 2, 3] + else: + properties: + awinic,display-rows: + enum: [1, 2, 3, 4, 5, 6, 7] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@3a { + compatible = "awinic,aw20036"; + reg = <0x3a>; + #address-cells = <1>; + #size-cells = <0>; + awinic,display-rows = <3>; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + led-max-microamp = <9780>; + }; + + led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_GREEN>; + led-max-microamp = <9780>; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_BLUE>; + led-max-microamp = <9780>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml index e1191453c2f0..c914e1276982 100644 --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml @@ -21,6 +21,9 @@ properties: compatible: const: kinetic,ktz8866 + reg: + maxItems: 1 + vddpos-supply: description: positive boost supply regulator. @@ -33,6 +36,7 @@ properties: current-num-sinks: description: number of the LED current sinks' channels. + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3, 4, 5, 6] kinetic,current-ramp-delay-ms: @@ -53,6 +57,7 @@ properties: required: - compatible + - reg - vddpos-supply - vddneg-supply - enable-gpios @@ -63,14 +68,19 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight { - compatible = "kinetic,ktz8866"; - - vddpos-supply = <&bl_vddpos_5p5>; - vddneg-supply = <&bl_vddneg_5p5>; - enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; - current-num-sinks = <5>; - kinetic,current-ramp-delay-ms = <128>; - kinetic,led-enable-ramp-delay-ms = <1>; - kinetic,enable-lcd-bias; + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml new file mode 100644 index 000000000000..9416e1bfab92 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments LP855X backlight controllers + +maintainers: + - Artur Weber <aweber.kernel@gmail.com> + +properties: + compatible: + enum: + - ti,lp8550 + - ti,lp8551 + - ti,lp8552 + - ti,lp8553 + - ti,lp8555 + - ti,lp8556 + - ti,lp8557 + + reg: + maxItems: 1 + + dev-ctrl: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + Value of device control register. This is a device-specific value. + + bl-name: + $ref: /schemas/types.yaml#/definitions/string + description: Backlight device name. + + init-brt: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Initial value of backlight brightness. + + power-supply: + description: Regulator which controls the 3V rail. + + enable-supply: + description: Regulator which controls the EN/VDDIO input. + + pwms: + maxItems: 1 + description: | + PWM channel to use for controlling the backlight; setting this + enables the PWM-based backlight control mode. + + pwm-names: true + + pwm-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + PWM period value. Deprecated; set the period value in the pwms + property instead. + deprecated: true + +patternProperties: + "^rom-[0-9a-f]{2}h$": + type: object + description: Nodes containing the values of configuration registers. + additionalProperties: false + properties: + rom-addr: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Register address of ROM area to be updated. + + rom-val: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Value to write to the ROM register. + +required: + - compatible + - reg + - dev-ctrl + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8555"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x00>; + + pwms = <&pwm 0 10000>; + pwm-names = "lp8555"; + + /* 4V OV, 4 output LED0 string enabled */ + rom-14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + + /* Heavy smoothing, 24ms ramp time step */ + rom-15h { + rom-addr = /bits/ 8 <0x15>; + rom-val = /bits/ 8 <0xc7>; + }; + + /* 4 output LED1 string enabled */ + rom-19h { + rom-addr = /bits/ 8 <0x19>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + bl-name = "lcd-bl"; + dev-ctrl = /bits/ 8 <0x85>; + init-brt = /bits/ 8 <0x10>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + enable-supply = <&backlight_vddio>; + power-supply = <&backlight_vdd>; + + dev-ctrl = /bits/ 8 <0x41>; + init-brt = /bits/ 8 <0x0a>; + + /* 4V OV, 4 output LED string enabled */ + rom-14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt deleted file mode 100644 index 88f56641fc28..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt +++ /dev/null @@ -1,72 +0,0 @@ -lp855x bindings - -Required properties: - - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553", - "ti,lp8555", "ti,lp8556", "ti,lp8557" - - reg: I2C slave address (u8) - - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device. - -Optional properties: - - bl-name: Backlight device name (string) - - init-brt: Initial value of backlight brightness (u8) - - pwm-period: PWM period value. Set only PWM input mode used (u32) - - rom-addr: Register address of ROM area to be updated (u8) - - rom-val: Register value to be updated (u8) - - power-supply: Regulator which controls the 3V rail - - enable-supply: Regulator which controls the EN/VDDIO input - -Example: - - /* LP8555 */ - backlight@2c { - compatible = "ti,lp8555"; - reg = <0x2c>; - - dev-ctrl = /bits/ 8 <0x00>; - pwm-period = <10000>; - - /* 4V OV, 4 output LED0 string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - - /* Heavy smoothing, 24ms ramp time step */ - rom_15h { - rom-addr = /bits/ 8 <0x15>; - rom-val = /bits/ 8 <0xc7>; - }; - - /* 4 output LED1 string enabled */ - rom_19h { - rom-addr = /bits/ 8 <0x19>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - - /* LP8556 */ - backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - - bl-name = "lcd-bl"; - dev-ctrl = /bits/ 8 <0x85>; - init-brt = /bits/ 8 <0x10>; - }; - - /* LP8557 */ - backlight@2c { - compatible = "ti,lp8557"; - reg = <0x2c>; - enable-supply = <&backlight_vddio>; - power-supply = <&backlight_vdd>; - - dev-ctrl = /bits/ 8 <0x41>; - init-brt = /bits/ 8 <0x0a>; - - /* 4V OV, 4 output LED string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml index 5ec47a8c6568..535690288990 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml @@ -68,7 +68,6 @@ dependencies: required: - compatible - pwms - - power-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 11aedf1650a1..58b492d00246 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -105,8 +105,6 @@ properties: - audio-mute # LED indicates bluetooth power state - bluetooth-power - # LED indicates activity of all CPUs - - cpu # LED indicates camera flash state - flash # LED indicated keyboard capslock diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index 31840e33dcf5..e850a8894758 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -34,7 +34,7 @@ required: - color allOf: - - $ref: "common.yaml#" + - $ref: common.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index ae607911f1db..058be1fedbc8 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -66,6 +66,14 @@ properties: '#size-cells': const: 0 + ti,charge-pump-mode: + description: + Set the operating mode of the internal charge pump as defined in + <dt-bindings/leds/leds-lp55xx.h>. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3 # auto + maximum: 3 + patternProperties: '^multi-led@[0-8]$': type: object @@ -152,6 +160,7 @@ additionalProperties: false examples: - | #include <dt-bindings/leds/common.h> + #include <dt-bindings/leds/leds-lp55xx.h> i2c { #address-cells = <1>; @@ -164,6 +173,7 @@ examples: reg = <0x32>; clock-mode = /bits/ 8 <2>; pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + ti,charge-pump-mode = <LP55XX_CP_BYPASS>; led@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt index 73353692efa1..052dccb8f2ce 100644 --- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt @@ -12,7 +12,10 @@ For MediaTek PMIC wrapper bindings see: Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml Required properties: -- compatible : Must be "mediatek,mt6323-led" +- compatible : Must be one of + - "mediatek,mt6323-led" + - "mediatek,mt6331-led" + - "mediatek,mt6332-led" - address-cells : Must be 1 - size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index 6295c91f43e8..e6f1999cb22f 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -16,18 +16,24 @@ description: > properties: compatible: - enum: - - qcom,pm660l-lpg - - qcom,pm8150b-lpg - - qcom,pm8150l-lpg - - qcom,pm8350c-pwm - - qcom,pm8916-pwm - - qcom,pm8941-lpg - - qcom,pm8994-lpg - - qcom,pmc8180c-lpg - - qcom,pmi8994-lpg - - qcom,pmi8998-lpg - - qcom,pmk8550-pwm + oneOf: + - enum: + - qcom,pm660l-lpg + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8350c-pwm + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi632-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + - qcom,pmk8550-pwm + - items: + - enum: + - qcom,pm8550-pwm + - const: qcom,pm8350c-pwm "#pwm-cells": const: 2 diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml index 4d2ffe5fcfc7..37d2a93780ab 100644 --- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml +++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - ocs,ocp8110 + - richtek,rt5033-led - sgmicro,sgm3140 enable-gpios: diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index ffacf703d9f9..a8736fd5a539 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -26,6 +26,8 @@ properties: - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led + - qcom,pm8550-flash-led + - qcom,pmi8998-flash-led - const: qcom,spmi-flash-led reg: diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 64b0be9cf70b..58f0d94c6d71 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -32,7 +32,7 @@ patternProperties: properties: rohm,led-compatible: description: LED identification string - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - bd71828-ambled - bd71828-grnled diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt deleted file mode 100644 index b48d7d30012c..000000000000 --- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt +++ /dev/null @@ -1,26 +0,0 @@ -Broadcom BCM2835 VideoCore mailbox IPC - -Required properties: - -- compatible: Should be "brcm,bcm2835-mbox" -- reg: Specifies base physical address and size of the registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- #mbox-cells: Specifies the number of cells needed to encode a mailbox - channel. The value shall be 0, since there is only one - mailbox channel implemented by the device. - -Example: - -mailbox: mailbox@7e00b880 { - compatible = "brcm,bcm2835-mbox"; - reg = <0x7e00b880 0x40>; - interrupts = <0 1>; - #mbox-cells = <0>; -}; - -firmware: firmware { - compatible = "raspberrypi,firmware"; - mboxes = <&mailbox>; - #power-domain-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml new file mode 100644 index 000000000000..9588817f4511 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 VideoCore mailbox IPC + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +properties: + compatible: + const: brcm,bcm2835-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml index a3e87516d637..2d14fc948999 100644 --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -66,6 +66,7 @@ properties: oneOf: - const: nvidia,tegra186-hsp - const: nvidia,tegra194-hsp + - const: nvidia,tegra264-hsp - items: - const: nvidia,tegra234-hsp - const: nvidia,tegra194-hsp diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 32d7bbc98cac..d2e25ff6db7f 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -18,6 +18,7 @@ properties: oneOf: - items: - enum: + - qcom,ipq5018-apcs-apps-global - qcom,ipq5332-apcs-apps-global - qcom,ipq8074-apcs-apps-global - qcom,ipq9574-apcs-apps-global diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index 374ffe64016f..aeaddbf574b0 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -33,7 +33,7 @@ description: | +------------------------------------------+ maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml index 444f24838d3d..6c72e77b927c 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -65,9 +65,14 @@ properties: properties: data-lanes: true + bus-type: + enum: + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY required: - data-lanes + - bus-type required: - port@4 @@ -82,6 +87,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c@e6508000 { #address-cells = <1>; @@ -101,6 +107,7 @@ examples: port@4 { reg = <4>; max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml index 8b389314c352..e2ffe0a9c26b 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml @@ -49,6 +49,7 @@ properties: properties: data-lanes: + minItems: 1 maxItems: 2 required: diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml index eb1499912c58..9cc0a968a401 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -155,7 +155,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8916.h> - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml index 8a10aa1cafc5..5cb0e337ea6e 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -221,7 +221,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> - camss: camss@a00000 { + camss: camss@a34000 { compatible = "qcom,msm8996-camss"; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml index 0a109e126064..584106e275f6 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -227,7 +227,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm660.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> - camss: camss@ca00000 { + camss: camss@ca00020 { compatible = "qcom,sdm660-camss"; clocks = <&mmcc CAMSS_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml index 1530ad0d80bd..ec4380a0a03f 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -219,7 +219,7 @@ examples: #address-cells = <2>; #size-cells = <2>; - camss: camss@a00000 { + camss: camss@acb3000 { compatible = "qcom,sdm845-camss"; clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml index 7dde7967c886..1e72b8808d24 100644 --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -137,7 +137,7 @@ examples: cru_parallel_in: endpoint@0 { reg = <0>; - remote-endpoint= <&ov5642>; + remote-endpoint = <&ov5642>; hsync-active = <1>; vsync-active = <1>; }; @@ -150,7 +150,7 @@ examples: cru_csi_in: endpoint@0 { reg = <0>; - remote-endpoint= <&csi_cru_in>; + remote-endpoint = <&csi_cru_in>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 91e8f368fb52..324703bfb1bd 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -303,11 +303,11 @@ examples: vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml index dd645ddccb07..ea2342222408 100644 --- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml @@ -21,7 +21,9 @@ properties: - const: rockchip,rk3288-rga - const: rockchip,rk3399-rga - items: - - const: rockchip,rk3228-rga + - enum: + - rockchip,rk3228-rga + - rockchip,rk3568-rga - const: rockchip,rk3288-rga reg: diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index ee622a8ee1cc..772ec3283bc6 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3399-vpu - rockchip,px30-vpu - rockchip,rk3568-vpu + - rockchip,rk3588-av1-vpu - items: - const: rockchip,rk3188-vpu - const: rockchip,rk3066-vpu diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 8eb90c043d5d..e69de29bb2d1 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -1,78 +0,0 @@ -* Samsung Multi Format Codec (MFC) - -Multi Format Codec (MFC) is the IP present in Samsung SoCs which -supports high resolution decoding and encoding functionalities. -The MFC device driver is a v4l2 driver which can encode/decode -video raw/elementary streams and has support for all popular -video codecs. - -Required properties: - - compatible : value should be either one among the following - (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs - (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs - (c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7 - present in Exynos3250 SoC - (d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC - (e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC - (f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC - (g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : MFC interrupt number to the CPU. - - clocks : from common clock binding: handle to mfc clock. - - clock-names : from common clock binding: must contain "mfc", - corresponding to entry in the clocks property. - -Optional properties: - - power-domains : power-domain property defined with a phandle - to respective power domain. - - memory-region : from reserved memory binding: phandles to two reserved - memory regions, first is for "left" mfc memory bus interfaces, - second if for the "right" mfc memory bus, used when no SYSMMU - support is available; used only by MFC v5 present in Exynos4 SoCs - -Obsolete properties: - - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region - property instead - - -Example: -SoC specific DT entry: - -mfc: codec@13400000 { - compatible = "samsung,mfc-v5"; - reg = <0x13400000 0x10000>; - interrupts = <0 94 0>; - power-domains = <&pd_mfc>; - clocks = <&clock 273>; - clock-names = "mfc"; -}; - -Reserved memory specific DT entry for given board (see reserved memory binding -for more information): - -reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mfc_left: region@51000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x51000000 0x800000>; - }; - - mfc_right: region@43000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x43000000 0x800000>; - }; -}; - -Board specific DT entry: - -codec@13400000 { - memory-region = <&mfc_left>, <&mfc_right>; -}; diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml new file mode 100644 index 000000000000..084b44582a43 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Multi Format Codec (MFC) + +maintainers: + - Marek Szyprowski <m.szyprowski@samsung.com> + - Aakarsh Jain <aakarsh.jain@samsung.com> + +description: + Multi Format Codec (MFC) is the IP present in Samsung SoCs which + supports high resolution decoding and encoding functionalities. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5433-mfc # Exynos5433 + - samsung,mfc-v5 # Exynos4 + - samsung,mfc-v6 # Exynos5 + - samsung,mfc-v7 # Exynos5420 + - samsung,mfc-v8 # Exynos5800 + - samsung,mfc-v10 # Exynos7880 + - items: + - enum: + - samsung,exynos3250-mfc # Exynos3250 + - const: samsung,mfc-v7 # Fall back for Exynos3250 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + memory-region: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-mfc + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + maxItems: 1 + iommus-names: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-mfc + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v5 + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v6 + - samsung,mfc-v8 + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: mfc + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v7 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + iommus: + minItems: 1 + maxItems: 2 + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/clock/exynos-audss-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; + clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml index 7d77823dbb7a..43daf837fc9f 100644 --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx MIPI CSI-2 Receiver Subsystem maintainers: - - Vishal Sagar <vishal.sagar@xilinx.com> + - Vishal Sagar <vishal.sagar@amd.com> description: | The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2 diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml new file mode 100644 index 000000000000..ac1a5a17749d --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Memory Controller + +maintainers: + - Marvin Lin <kflin@nuvoton.com> + - Stanley Chu <yschu@nuvoton.com> + +description: | + The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction + check). + + The memory controller supports single bit error correction, double bit error + detection (in-line ECC in which a section (1/8th) of the memory device used to + store data is used for ECC storage). + + Note, the bootloader must configure ECC mode for the memory controller. + +properties: + compatible: + enum: + - nuvoton,npcm750-memory-controller + - nuvoton,npcm845-memory-controller + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mc: memory-controller@f0824000 { + compatible = "nuvoton,npcm750-memory-controller"; + reg = <0xf0824000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml index 2fa44951cfde..f54e553e6c0e 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml @@ -165,7 +165,7 @@ patternProperties: const: 0 lpddr2: - $ref: "ddr/jedec,lpddr2.yaml#" + $ref: ddr/jedec,lpddr2.yaml# type: object patternProperties: diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml index e68c4306025a..87ff9ee098f5 100644 --- a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml @@ -8,8 +8,7 @@ title: Synopsys DesignWare Universal Multi-Protocol Memory Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Manish Narani <manish.narani@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml index bc9406929f6c..b049837ee669 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -129,7 +129,7 @@ patternProperties: The child device node represents the device connected to the GPMC bus. The device can be a NAND chip, SRAM device, NOR device or an ASIC. - $ref: "ti,gpmc-child.yaml" + $ref: ti,gpmc-child.yaml required: diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml index 8f72e2f8588a..75143db51411 100644 --- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml @@ -8,8 +8,7 @@ title: Zynq A05 DDR Memory Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Manish Narani <manish.narani@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: The Zynq DDR ECC controller has an optional ECC support in half-bus width diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml new file mode 100644 index 000000000000..c7895b2c38c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index 148f1da47603..9f9a14af875e 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index 7e582243ea76..803277dd2725 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index 2230848e11c3..b9a6856ce970 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index c06693b6f7aa..4651fe4dde07 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index c560bede0e37..0330b621fd38 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index c534f5f2404e..82d3e4415bda 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 8459d3642205..3b3beab9db3f 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index acb9c54942d9..dc379f3ebf24 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1 @@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible @@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 36de335a33aa..8b9a2008a354 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -71,6 +71,7 @@ properties: - qcom,pm8998 - qcom,pma8084 - qcom,pmd9635 + - qcom,pmi632 - qcom,pmi8950 - qcom,pmi8962 - qcom,pmi8994 @@ -133,6 +134,7 @@ patternProperties: oneOf: - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# + - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# "gpio@[0-9a-f]+$": type: object @@ -146,6 +148,10 @@ patternProperties: type: object $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# + "pon@[0-9a-f]+$": type: object $ref: /schemas/power/reset/qcom,pon.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index fe790af7b4fb..5ad9d5deaaf8 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -34,6 +34,7 @@ properties: - qcom,tcsr-ipq5332 - qcom,tcsr-ipq6018 - qcom,tcsr-ipq8064 + - qcom,tcsr-ipq8074 - qcom,tcsr-ipq9574 - qcom,tcsr-mdm9615 - qcom,tcsr-msm8226 diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 000000000000..386b1a50158a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 000000000000..cf2500f2e9a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml index 10c7b408f33a..aea0b7d57d04 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -153,29 +153,18 @@ dependencies: additionalProperties: false allOf: - - if: + - not: required: - s5m8767,pmic-buck2-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck3-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: - required: - s5m8767,pmic-buck3-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: + - not: required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs - s5m8767,pmic-buck4-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck3-uses-gpio-dvs: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index 9573e4af949e..97c61097f9e2 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -184,7 +184,7 @@ properties: additionalProperties: false patternProperties: - "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 0c98d913747b..e6289fbe6907 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -101,7 +101,7 @@ examples: }; clock-controller@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml new file mode 100644 index 000000000000..9d43376bebed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS6594 Power Management Integrated Circuit + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: + TPS6594 is a Power Management IC which provides regulators and others + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and + PFSM (Pre-configurable Finite State Machine) managing the state of the device. + TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. + +properties: + compatible: + enum: + - ti,lp8764-q1 + - ti,tps6593-q1 + - ti,tps6594-q1 + + reg: + description: I2C slave address or SPI chip select number. + maxItems: 1 + + ti,primary-pmic: + type: boolean + description: | + Identify the primary PMIC on SPMI bus. + A multi-PMIC synchronization scheme is implemented in the PMIC device + to synchronize the power state changes with other PMIC devices. This is + accomplished through a SPMI bus: the primary PMIC is the controller + device on the SPMI bus, and the secondary PMICs are the target devices + on the SPMI bus. + + system-power-controller: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number, the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + + interrupts: + maxItems: 1 + + regulators: + type: object + description: List of regulators provided by this controller. + + patternProperties: + "^buck([1-5]|12|34|123|1234)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + allOf: + - if: + required: + - buck12 + then: + properties: + buck123: false + buck1234: false + - if: + required: + - buck123 + then: + properties: + buck34: false + - if: + required: + - buck1234 + then: + properties: + buck34: false + + additionalProperties: false + +patternProperties: + "^buck([1-5]|12|34|123|1234)-supply$": + description: Input supply phandle for each buck. + + "^ldo[1-4]-supply$": + description: Input supply phandle for each ldo. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps6593: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml index f7f0f2c0421a..9ad55746133b 100644 --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -90,6 +90,7 @@ properties: oneOf: - enum: - x-powers,axp152 + - x-powers,axp192 - x-powers,axp202 - x-powers,axp209 - x-powers,axp221 diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml index 704b5b595127..53c1f6635377 100644 --- a/Documentation/devicetree/bindings/mips/ralink.yaml +++ b/Documentation/devicetree/bindings/mips/ralink.yaml @@ -80,6 +80,7 @@ properties: - enum: - gnubee,gb-pc1 - gnubee,gb-pc2 + - tplink,hc220-g5-v1 - const: mediatek,mt7621-soc additionalProperties: true diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt deleted file mode 100644 index 05b47232ed9e..000000000000 --- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom Secure Monitor Bounce buffer ------------------------------------------------------ -This binding defines the location of the bounce buffer -used for non-secure to secure communications. - -Required properties: -- compatible : "brcm,kona-smc" -- DEPRECATED: compatible : "bcm,kona-smc" -- reg : Location and size of bounce buffer - -Example: - smc@3404c000 { - compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; - reg = <0x3404c000 0x400>; //1 KiB in SRAM - }; diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml index 1ab9588cdd89..2dc3e245fa5d 100644 --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -36,7 +36,7 @@ properties: description: A list of channels tied to this function, used for matching the function to a set of virtual channels. - $ref: "/schemas/types.yaml#/definitions/string-array" + $ref: /schemas/types.yaml#/definitions/string-array items: - const: fastrpcglink-apps-dsp @@ -48,14 +48,14 @@ properties: qcom,smd-channels: description: Channel name used for the RPM communication - $ref: "/schemas/types.yaml#/definitions/string-array" + $ref: /schemas/types.yaml#/definitions/string-array items: - const: fastrpcsmd-apps-dsp qcom,vmids: description: Virtual machine IDs for remote processor. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml new file mode 100644 index 000000000000..0c9a8444844c --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + maxItems: 1 + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +required: + - compatible + - reg + - ti,esm-pins + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 1c96da04f0e5..2459a55ed540 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -53,10 +53,11 @@ properties: items: - const: arm,pl18x - const: arm,primecell - - description: Entry for STMicroelectronics variant of PL18x. - This dedicated compatible is used by bootloaders. + - description: Entries for STMicroelectronics variant of PL18x. items: - - const: st,stm32-sdmmc2 + - enum: + - st,stm32-sdmmc2 + - st,stm32mp25-sdmmc2 - const: arm,pl18x - const: arm,primecell diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt deleted file mode 100644 index d876580ae3b8..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt +++ /dev/null @@ -1,23 +0,0 @@ -Broadcom BCM2835 SDHOST controller - -This file documents differences between the core properties described -by mmc.txt and the properties that represent the BCM2835 controller. - -Required properties: -- compatible: Should be "brcm,bcm2835-sdhost". -- clocks: The clock feeding the SDHOST controller. - -Optional properties: -- dmas: DMA channel for read and write. - See Documentation/devicetree/bindings/dma/dma.txt for details - -Example: - -sdhost: mmc@7e202000 { - compatible = "brcm,bcm2835-sdhost"; - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml new file mode 100644 index 000000000000..3a5a44800675 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 SDHOST controller + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + const: brcm,bcm2835-sdhost + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + bus-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt deleted file mode 100644 index 7f5dd83f5bd9..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ /dev/null @@ -1,21 +0,0 @@ -Broadcom BCM281xx SDHCI - -This file documents differences between the core properties in mmc.txt -and the properties present in the bcm281xx SDHCI - -Required properties: -- compatible : Should be "brcm,kona-sdhci" -- DEPRECATED: compatible : Should be "bcm,kona-sdhci" -- clocks: phandle + clock specifier pair of the external clock - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - -sdio2: sdio@3f1a0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1a0000 0x10000>; - clocks = <&sdio3_clk>; - interrupts = <0x0 74 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml new file mode 100644 index 000000000000..12eb3988f824 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family SDHCI controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: sdhci-common.yaml# + +properties: + compatible: + const: brcm,kona-sdhci + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/bcm281xx.h> + + mmc@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index fbfd822b9270..82eb7a24c857 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -42,6 +42,7 @@ properties: - enum: - fsl,imx6sll-usdhc - fsl,imx6ull-usdhc + - fsl,imx6ul-usdhc - const: fsl,imx6sx-usdhc - items: - const: fsl,imx7d-usdhc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 4f2d9e8127dd..6da28e630577 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -36,11 +36,14 @@ properties: - enum: - qcom,ipq5018-sdhci - qcom,ipq5332-sdhci + - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci + - qcom,qdu1000-sdhci - qcom,sc7180-sdhci - qcom,sc7280-sdhci + - qcom,sc8280xp-sdhci - qcom,sdm630-sdhci - qcom,sdm670-sdhci - qcom,sdm845-sdhci diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 9a88870cd865..054b6b8bf9b9 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -49,13 +49,12 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 7 - nand-ecc-mode: true - nand-ecc-algo: const: bch @@ -75,7 +74,7 @@ patternProperties: minimum: 0 maximum: 1 - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 28fb9a7dd70f..787ef488dd5b 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -58,6 +59,14 @@ patternProperties: meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60 meson-axg-nfc 8 + nand-rb: + maxItems: 1 + items: + maximum: 0 + + unevaluatedProperties: false + + required: - compatible - reg @@ -87,6 +96,7 @@ examples: nand@0 { reg = <0>; + nand-rb = <0>; }; }; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index 1571024aa119..f57e96374e67 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -114,6 +114,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: compatible: const: brcm,nandcs @@ -136,6 +137,8 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# - if: diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 0be83ad42970..81f95538d415 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -63,6 +63,12 @@ properties: minItems: 1 maxItems: 2 +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml @@ -74,7 +80,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -92,7 +97,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -111,7 +115,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index a7bdb5d3675c..b9312ebefeb9 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -39,7 +39,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + rb-gpios: description: GPIO specifier for the busy pin. maxItems: 1 @@ -48,6 +50,8 @@ patternProperties: description: GPIO specifier for the write-protect pin. maxItems: 1 + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml index cc3def758e00..07bc7e3efd3a 100644 --- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml +++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml @@ -42,17 +42,16 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 1 - nand-ecc-mode: true - nand-ecc-algo: const: hw - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml new file mode 100644 index 000000000000..a10729bb1840 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell NAND Flash Controller (NFC) + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - const: marvell,armada-8k-nand-controller + - const: marvell,armada370-nand-controller + - enum: + - marvell,armada370-nand-controller + - marvell,pxa3xx-nand-controller + - description: legacy bindings + deprecated: true + enum: + - marvell,armada-8k-nand + - marvell,armada370-nand + - marvell,pxa3xx-nand + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Shall reference the NAND controller clocks, the second one is + is only needed for the Armada 7K/8K SoCs + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + + dmas: + maxItems: 1 + + dma-names: + items: + - const: data + + marvell,system-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: Syscon node that handles NAND controller related registers + +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + + properties: + reg: + minimum: 0 + maximum: 3 + + nand-rb: + items: + - minimum: 0 + maximum: 1 + + nand-ecc-step-size: + const: 512 + + nand-ecc-strength: + enum: [1, 4, 8, 12, 16] + + nand-ecc-mode: + const: hw + + marvell,nand-keep-config: + $ref: /schemas/types.yaml#/definitions/flag + description: + Orders the driver not to take the timings from the core and + leaving them completely untouched. Bootloader timings will then + be used. + + marvell,nand-enable-arbiter: + $ref: /schemas/types.yaml#/definitions/flag + description: + To enable the arbiter, all boards blindly used it, + this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless). + deprecated: true + + required: + - reg + - nand-rb + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: nand-controller.yaml# + + - if: + properties: + compatible: + contains: + const: marvell,pxa3xx-nand-controller + then: + required: + - dmas + - dma-names + + - if: + properties: + compatible: + contains: + const: marvell,armada-8k-nand-controller + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + required: + - marvell,system-controller + + else: + properties: + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; + }; + + - | + cp0_nand_controller: nand-controller@720000 { + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cp0_clk 1 2>, + <&cp0_clk 1 17>; + marvell,system-controller = <&cp0_syscon0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; + + - | + nand-controller@43100000 { + compatible = "marvell,pxa3xx-nand-controller"; + reg = <0x43100000 90>; + interrupts = <45>; + clocks = <&clks 1>; + clock-names = "core"; + dmas = <&pdma 97 3>; + dma-names = "data"; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt deleted file mode 100644 index a2d9a0f2b683..000000000000 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ /dev/null @@ -1,126 +0,0 @@ -Marvell NAND Flash Controller (NFC) - -Required properties: -- compatible: can be one of the following: - * "marvell,armada-8k-nand-controller" - * "marvell,armada370-nand-controller" - * "marvell,pxa3xx-nand-controller" - * "marvell,armada-8k-nand" (deprecated) - * "marvell,armada370-nand" (deprecated) - * "marvell,pxa3xx-nand" (deprecated) - Compatibles marked deprecated support only the old bindings described - at the bottom. -- reg: NAND flash controller memory area. -- #address-cells: shall be set to 1. Encode the NAND CS. -- #size-cells: shall be set to 0. -- interrupts: shall define the NAND controller interrupt. -- clocks: shall reference the NAND controller clocks, the second one is - is only needed for the Armada 7K/8K SoCs -- clock-names: mandatory if there is a second clock, in this case there - should be one clock named "core" and another one named "reg" -- marvell,system-controller: Set to retrieve the syscon node that handles - NAND controller related registers (only required with the - "marvell,armada-8k-nand[-controller]" compatibles). - -Optional properties: -- label: see partition.txt. New platforms shall omit this property. -- dmas: shall reference DMA channel associated to the NAND controller. - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. -- dma-names: shall be "rxtx". - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. - -Optional children nodes: -Children nodes represent the available NAND chips. - -Required properties: -- reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand-controller.yaml (0-1). - -Optional properties: -- marvell,nand-keep-config: orders the driver not to take the timings - from the core and leaving them completely untouched. Bootloader - timings will then be used. -- label: MTD name. -- nand-on-flash-bbt: see nand-controller.yaml. -- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when - not using hardware ECC. Howerver, it may be added when using hardware - ECC for clarification but will be ignored by the driver because ECC - mode is chosen depending on the page size and the strength required by - the NAND chip. This value may be overwritten with nand-ecc-strength - property. -- nand-ecc-strength: see nand-controller.yaml. -- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does - use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual - step size will shrink or grow in order to fit the required strength. - Step sizes are not completely random for all and follow certain - patterns described in AN-379, "Marvell SoC NFC ECC". - -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on -generic bindings. - - -Example: -nand_controller: nand-controller@d0000 { - compatible = "marvell,armada370-nand-controller"; - reg = <0xd0000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coredivclk 0>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Rootfs"; - reg = <0x00000000 0x40000000>; - }; - }; - }; -}; - - -Note on legacy bindings: One can find, in not-updated device trees, -bindings slightly different than described above with other properties -described below as well as the partitions node at the root of a so -called "nand" node (without clear controller/chip separation). - -Legacy properties: -- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly - used it, this bit was set by the bootloader for many boards and even if - it is marked reserved in several datasheets, it might be needed to set - it (otherwise it is harmless) so whether or not this property is set, - the bit is selected by the driver. -- num-cs: Number of chip-select lines to use, all boards blindly set 1 - to this and for a reason, other values would have failed. The value of - this property is ignored. - -Example: - - nand0: nand@43100000 { - compatible = "marvell,pxa3xx-nand"; - reg = <0x43100000 90>; - interrupts = <45>; - dmas = <&pdma 97 0>; - dma-names = "rxtx"; - #address-cells = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - num-cs = <1>; - /* Partitions (optional) */ - }; diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml index a6e7f123eda7..ab503a33a269 100644 --- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml +++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml @@ -40,12 +40,11 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# + $ref: raw-nand-chip.yaml# unevaluatedProperties: false properties: reg: maximum: 1 - nand-on-flash-bbt: true nand-ecc-mode: const: hw diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml index f8c976898a95..18f6733408b4 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -164,7 +164,7 @@ examples: reg = <0 0xf80000>; }; firmware@f80000 { - label ="firmware"; + label = "firmware"; reg = <0xf80000 0x80000>; read-only; }; diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index da3d488c335f..b82ca03e969c 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^(flash|.*sram)(@.*)?$" + pattern: "^(flash|.*sram|nand)(@.*)?$" label: description: diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index f70a32d2d9d4..83a4fe4cc29d 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -16,16 +16,6 @@ description: | children nodes of the NAND controller. This representation should be enforced even for simple controllers supporting only one chip. - The ECC strength and ECC step size properties define the user - desires in terms of correction capability of a controller. Together, - they request the ECC engine to correct {strength} bit errors per - {size} bytes. - - The interpretation of these parameters is implementation-defined, so - not all implementations must support all possible - combinations. However, implementations are encouraged to further - specify the value(s) they support. - properties: $nodename: pattern: "^nand-controller(@.*)?" @@ -51,79 +41,8 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# - - properties: - reg: - description: - Contains the chip-select IDs. - - nand-ecc-placement: - description: - Location of the ECC bytes. This location is unknown by default - but can be explicitly set to "oob", if all ECC bytes are - known to be stored in the OOB area, or "interleaved" if ECC - bytes will be interleaved with regular data in the main area. - $ref: /schemas/types.yaml#/definitions/string - enum: [ oob, interleaved ] - - nand-bus-width: - description: - Bus width to the NAND chip - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [8, 16] - default: 8 - - nand-on-flash-bbt: - description: - With this property, the OS will search the device for a Bad - Block Table (BBT). If not found, it will create one, reserve - a few blocks at the end of the device to store it and update - it as the device ages. Otherwise, the out-of-band area of a - few pages of all the blocks will be scanned at boot time to - find Bad Block Markers (BBM). These markers will help to - build a volatile BBT in RAM. - $ref: /schemas/types.yaml#/definitions/flag - - nand-ecc-maximize: - description: - Whether or not the ECC strength should be maximized. The - maximum ECC strength is both controller and chip - dependent. The ECC engine has to select the ECC config - providing the best strength and taking the OOB area size - constraint into account. This is particularly useful when - only the in-band area is used by the upper layers, and you - want to make your NAND as reliable as possible. - $ref: /schemas/types.yaml#/definitions/flag - - nand-is-boot-medium: - description: - Whether or not the NAND chip is a boot medium. Drivers might - use this information to select ECC algorithms supported by - the boot ROM or similar restrictions. - $ref: /schemas/types.yaml#/definitions/flag - - nand-rb: - description: - Contains the native Ready/Busy IDs. - $ref: /schemas/types.yaml#/definitions/uint32-array - - rb-gpios: - description: - Contains one or more GPIO descriptor (the numper of descriptor - depends on the number of R/B pins exposed by the flash) for the - Ready/Busy pins. Active state refers to the NAND ready state and - should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. - - wp-gpios: - description: - Contains one GPIO descriptor for the Write Protect pin. - Active state refers to the NAND Write Protect state and should be - set to GPIOD_ACTIVE_LOW unless the signal is inverted. - maxItems: 1 - - required: - - reg + type: object + $ref: raw-nand-chip.yaml# required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index cdffbb9cedc2..1ebe9e2347ea 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -55,6 +55,7 @@ properties: linux,rootfs: description: Marks partition that contains root filesystem to mount and boot user space from + type: boolean if: not: diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml index 2edc65e0e361..1dda2c80747b 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml @@ -21,6 +21,7 @@ oneOf: - $ref: linksys,ns-partitions.yaml - $ref: qcom,smem-part.yaml - $ref: redboot-fis.yaml + - $ref: tplink,safeloader-partitions.yaml properties: compatible: true diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 00c991ffa6c4..4ada60fbf81d 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -34,7 +34,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + nand-bus-width: const: 8 @@ -45,6 +47,24 @@ patternProperties: enum: - 512 + qcom,boot-partitions: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: offset + - description: size + description: + Boot partition use a different layout where the 4 bytes of spare + data are not protected by ECC. Use this to declare these special + partitions by defining first the offset and then the size. + + It's in the form of <offset1 size1 offset2 size2 offset3 ...> + and should be declared in ascending order. + + Refer to the ipq8064 example on how to use this special binding. + + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# @@ -107,22 +127,15 @@ allOf: - qcom,ipq806x-nand then: - properties: - qcom,boot-partitions: - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: offset - - description: size - description: - Boot partition use a different layout where the 4 bytes of spare - data are not protected by ECC. Use this to declare these special - partitions by defining first the offset and then the size. - - It's in the form of <offset1 size1 offset2 size2 offset3 ...> - and should be declared in ascending order. - - Refer to the ipq8064 example on how to use this special binding. + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: true + else: + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml new file mode 100644 index 000000000000..092448d7bfc5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raw NAND Chip Common Properties + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +allOf: + - $ref: nand-chip.yaml# + +description: | + The ECC strength and ECC step size properties define the user + desires in terms of correction capability of a controller. Together, + they request the ECC engine to correct {strength} bit errors per + {size} bytes for a particular raw NAND chip. + + The interpretation of these parameters is implementation-defined, so + not all implementations must support all possible + combinations. However, implementations are encouraged to further + specify the value(s) they support. + +properties: + $nodename: + pattern: "^nand@[a-f0-9]$" + + reg: + description: + Contains the chip-select IDs. + + nand-ecc-placement: + description: + Location of the ECC bytes. This location is unknown by default + but can be explicitly set to "oob", if all ECC bytes are + known to be stored in the OOB area, or "interleaved" if ECC + bytes will be interleaved with regular data in the main area. + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] + deprecated: true + + nand-ecc-mode: + description: + Legacy ECC configuration mixing the ECC engine choice and + configuration. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, soft_bch, hw, hw_syndrome, on-die] + deprecated: true + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + + nand-on-flash-bbt: + description: + With this property, the OS will search the device for a Bad + Block Table (BBT). If not found, it will create one, reserve + a few blocks at the end of the device to store it and update + it as the device ages. Otherwise, the out-of-band area of a + few pages of all the blocks will be scanned at boot time to + find Bad Block Markers (BBM). These markers will help to + build a volatile BBT in RAM. + $ref: /schemas/types.yaml#/definitions/flag + + nand-ecc-maximize: + description: + Whether or not the ECC strength should be maximized. The + maximum ECC strength is both controller and chip + dependent. The ECC engine has to select the ECC config + providing the best strength and taking the OOB area size + constraint into account. This is particularly useful when + only the in-band area is used by the upper layers, and you + want to make your NAND as reliable as possible. + $ref: /schemas/types.yaml#/definitions/flag + + nand-is-boot-medium: + description: + Whether or not the NAND chip is a boot medium. Drivers might + use this information to select ECC algorithms supported by + the boot ROM or similar restrictions. + $ref: /schemas/types.yaml#/definitions/flag + + nand-rb: + description: + Contains the native Ready/Busy IDs. + $ref: /schemas/types.yaml#/definitions/uint32-array + + rb-gpios: + description: + Contains one or more GPIO descriptor (the numper of descriptor + depends on the number of R/B pins exposed by the flash) for the + Ready/Busy pins. Active state refers to the NAND ready state and + should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. + + wp-gpios: + description: + Contains one GPIO descriptor for the Write Protect pin. + Active state refers to the NAND Write Protect state and should be + set to GPIOD_ACTIVE_LOW unless the signal is inverted. + maxItems: 1 + +required: + - reg + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 7eb1d0a38565..ee53715ffdca 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -116,6 +117,8 @@ patternProperties: Only used in combination with 'nand-is-boot-medium'. + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 986e85ccebc7..e72cb5bacaf0 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -37,6 +37,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: nand-ecc-step-size: const: 512 @@ -44,6 +45,8 @@ patternProperties: nand-ecc-strength: enum: [1, 4, 8] + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml index 4774c92e7fc4..df4fdc02456d 100644 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -30,6 +30,8 @@ properties: patternProperties: "^flash@[0-1],[0-9a-f]+$": type: object + $ref: mtd-physmap.yaml + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index 3bd912ed7c7e..23e92be33ac8 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A20 GMAC allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 47bc2057e629..4bfac9186886 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -63,7 +63,7 @@ required: - syscon allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml index 9d02af468906..f5d3b70af07a 100644 --- a/Documentation/devicetree/bindings/net/altr,tse.yaml +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -72,8 +72,8 @@ allOf: compatible: contains: enum: - - const: altr,tse-1.0 - - const: ALTR,tse-1.0 + - altr,tse-1.0 + - ALTR,tse-1.0 then: properties: reg: diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index a2c51a84efa5..ee7a65b528cd 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -27,7 +27,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 57e4c87cb00b..f01a3988538c 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -24,11 +24,12 @@ properties: - nxp,88w8997-bt fw-init-baudrate: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 115200 description: Chip baudrate after FW is downloaded and initialized. This property depends on the module vendor's - configuration. If this property is not specified, - 115200 is set as default. + configuration. required: - compatible diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 68f78b90d23a..56cbb42b5aea 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt - qcom,wcn3990-bt @@ -50,6 +51,9 @@ properties: vddch0-supply: description: VDD_CH0 supply regulator handle + vddch1-supply: + description: VDD_CH1 supply regulator handle + vddaon-supply: description: VDD_AON supply regulator handle @@ -95,6 +99,7 @@ allOf: compatible: contains: enum: + - qcom,qca2066-bt - qcom,qca6174-bt then: required: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 0e5e5db32faf..7c90a4390531 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -55,7 +55,7 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "brcm,unimac-mdio.yaml" + $ref: brcm,unimac-mdio.yaml description: GENET internal UniMAC MDIO bus diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index 769fa5c27b76..de1d4298893b 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -21,11 +21,22 @@ properties: st,can-primary: description: - Primary and secondary mode of the bxCAN peripheral is only relevant - if the chip has two CAN peripherals. In that case they share some - of the required logic. + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. To avoid misunderstandings, it should be noted that ST documentation - uses the terms master/slave instead of primary/secondary. + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. type: boolean reg: diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index bef5e0f895be..bf8894a0257e 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -109,6 +109,16 @@ properties: power-domains: maxItems: 1 + cdns,rx-watermark: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the receive partial store and forward mode is activated, + the receiver will only begin to forward the packet to the external + AHB or AXI slave when enough packet data is stored in the SRAM packet buffer. + rx-watermark corresponds to the number of SRAM buffer locations, + that need to be filled, before the forwarding process is activated. + Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes. + '#address-cells': const: 1 @@ -166,6 +176,7 @@ examples: compatible = "cdns,macb"; reg = <0xfffc4000 0x4000>; interrupts = <21>; + cdns,rx-watermark = <0x44>; phy-mode = "rmii"; local-mac-address = [3a 0e 03 04 05 06]; clock-names = "pclk", "hclk", "tx_clk"; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 2363b412410c..33726134f5c9 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6390, 6390X + 6163, 6190, 6190X, 6191, 6290, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 9a64ed658745..4d5f5cc6d031 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -12,10 +12,6 @@ description: cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed depends on the SPI bus master driver. -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports - - $ref: /schemas/spi/spi-peripheral-props.yaml# - maintainers: - Vladimir Oltean <vladimir.oltean@nxp.com> @@ -36,6 +32,9 @@ properties: reg: maxItems: 1 + spi-cpha: true + spi-cpol: true + # Optional container node for the 2 internal MDIO buses of the SJA1110 # (one for the internal 100base-T1 PHYs and the other for the single # 100base-TX PHY). The "reg" property does not have physical significance. @@ -109,6 +108,30 @@ $defs: 1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080, 2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260] +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1105t + then: + properties: + spi-cpol: false + required: + - spi-cpha + else: + properties: + spi-cpha: false + required: + - spi-cpol + unevaluatedProperties: false examples: @@ -120,6 +143,7 @@ examples: ethernet-switch@1 { reg = <0x1>; compatible = "nxp,sja1105t"; + spi-cpha; ethernet-ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 4f574532ee13..c1241c8a3b77 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -93,6 +93,12 @@ properties: the turn around line low at end of the control phase of the MDIO transaction. + clocks: + maxItems: 1 + description: + External clock connected to the PHY. If not specified it is assumed + that the PHY uses a fixed crystal or an internal oscillator. + enet-phy-lane-swap: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index d23fa3771210..42a0bc94312c 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml index d71fa9de2b64..8a3713abd1ca 100644 --- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml +++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml @@ -17,11 +17,12 @@ properties: maxlinear,use-broken-interrupts: description: | Interrupts are broken on some GPY2xx PHYs in that they keep the - interrupt line asserted even after the interrupt status register is - cleared. Thus it is blocking the interrupt line which is usually bad - for shared lines. By default interrupts are disabled for this PHY and - polling mode is used. If one can live with the consequences, this - property can be used to enable interrupt handling. + interrupt line asserted for a random amount of time even after the + interrupt status register is cleared. Thus it is blocking the + interrupt line which is usually bad for shared lines. By default, + interrupts are disabled for this PHY and polling mode is used. If one + can live with the consequences, this property can be used to enable + interrupt handling. Affected PHYs (as far as known) are GPY215B and GPY215C. type: boolean diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 0fa2132fa4f4..5aa320c8af5a 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -25,7 +25,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: @@ -156,7 +156,7 @@ examples: reg = <0x1101c000 0x1300>; interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "macirq"; - phy-mode ="rgmii-rxid"; + phy-mode = "rgmii-rxid"; mac-address = [00 55 7b b5 7d f7]; clock-names = "axi", "apb", diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml index b44d83554ef5..b726c6e14633 100644 --- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml +++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml @@ -44,13 +44,13 @@ required: allOf: - $ref: ethernet-controller.yaml# - - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# - if: properties: compatible: contains: const: micrel,ks8851 then: + $ref: /schemas/spi/spi-peripheral-props.yaml# properties: reg: maxItems: 1 @@ -60,6 +60,7 @@ allOf: contains: const: micrel,ks8851-mll then: + $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# properties: reg: minItems: 2 diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 63409cbff5ad..4c01cae7c93a 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -24,7 +24,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index b110abb42597..2d382faca0e6 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -16,7 +16,7 @@ maintainers: properties: $nodename: - pattern: "^ethernet-pse(@.*)?$" + pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$" "#pse-cells": description: diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 60a38044fb19..7bdb412a0185 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos @@ -32,11 +33,13 @@ properties: - const: rgmii interrupts: + minItems: 1 items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state interrupt-names: + minItems: 1 items: - const: macirq - const: eth_lpi @@ -49,11 +52,18 @@ properties: - const: stmmaceth - const: pclk - const: ptp_ref - - const: rgmii + - enum: + - rgmii + - phyaux iommus: maxItems: 1 + phys: true + + phy-names: + const: serdes + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 8cc2b9924680..043e118c605c 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -11,7 +11,7 @@ maintainers: - Alistair Francis <alistair@alistair23.me> description: - RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part is connected over SDIO, while BT is connected over serial. It speaks H5 protocol with few extra commands to upload firmware and change module speed. @@ -27,7 +27,7 @@ properties: - items: - enum: - realtek,rtl8821cs-bt - - const: realtek,rtl8822cs-bt + - const: realtek,rtl8723bs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 2a21bbe02892..176ea5f90251 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -32,7 +32,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 363b3e3ea3a6..ddf9522a5dc2 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -67,6 +67,7 @@ properties: - loongson,ls2k-dwmac - loongson,ls7a-dwmac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - renesas,r9a06g032-gmac @@ -582,6 +583,7 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - snps,dwmac-3.50a - snps,dwmac-4.10a @@ -638,6 +640,7 @@ allOf: - ingenic,x1830-mac - ingenic,x2000-mac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - snps,dwmac-4.00 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 395a4650e285..c9c25132d154 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -168,14 +168,14 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "ti,davinci-mdio.yaml#" + $ref: ti,davinci-mdio.yaml# description: CPSW MDIO bus. "^cpts@[0-9a-f]+": type: object - $ref: "ti,k3-am654-cpts.yaml#" + $ref: ti,k3-am654-cpts.yaml# description: CPSW Common Platform Time Sync (CPTS) module. diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 474fa8bcf302..052f636158b3 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index fec1cc9b9a08..4aa521f1be8c 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -15,6 +15,9 @@ description: These chips also have a Bluetooth portion described in a separate binding. +allOf: + - $ref: ieee80211.yaml# + properties: compatible: oneOf: @@ -38,6 +41,7 @@ properties: - brcm,bcm4354-fmac - brcm,bcm4356-fmac - brcm,bcm4359-fmac + - brcm,bcm4366-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac - const: brcm,bcm4329-fmac @@ -120,7 +124,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt deleted file mode 100644 index 80e505a2fda1..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ /dev/null @@ -1,101 +0,0 @@ -XILINX AXI ETHERNET Device Tree Bindings --------------------------------------------------------- - -Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core -provides connectivity to an external ethernet PHY supporting different -interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two -segments of memory for buffering TX and RX, as well as the capability of -offloading TX/RX checksum calculation off the processor. - -Management configuration is done through the AXI interface, while payload is -sent and received through means of an AXI DMA controller. This driver -includes the DMA driver code, so this driver is incompatible with AXI DMA -driver. - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", - "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space, as well as the address - and length of the AXI DMA controller IO space, unless - axistream-connected is specified, in which case the reg - attribute of the node referenced by it is used. -- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, - and optionally Ethernet core. If axistream-connected is - specified, the TX/RX DMA interrupts should be on that node - instead, and only the Ethernet core interrupt is optionally - specified here. -- phy-handle : Should point to the external phy device if exists. Pointing - this to the PCS/PMA PHY is deprecated and should be avoided. - See ethernet.txt file in the same directory. -- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware - -Optional properties: -- phy-mode : See ethernet.txt -- xlnx,phy-type : Deprecated, do not use, but still accepted in preference - to phy-mode. -- xlnx,txcsum : 0 or empty for disabling TX checksum offload, - 1 to enable partial TX checksum offload, - 2 to enable full TX checksum offload -- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload -- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to - support both 1000BaseX and SGMII modes. If set, the phy-mode - should be set to match the mode selected on core reset (i.e. - by the basex_or_sgmii core input line). -- clock-names: Tuple listing input clock names. Possible clocks: - s_axi_lite_clk: Clock for AXI register slave interface - axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces - ref_clk: Ethernet reference clock, used by signal delay - primitives and transceivers - mgt_clk: MGT reference clock (used by optional internal - PCS/PMA PHY) - - Note that if s_axi_lite_clk is not specified by name, the - first clock of any name is used for this. If that is also not - specified, the clock rate is auto-detected from the CPU clock - (but only on platforms where this is possible). New device - trees should specify all applicable clocks by name - the - fallbacks to an unnamed clock or to CPU clock are only for - backward compatibility. -- clocks: Phandles to input clocks matching clock-names. Refer to common - clock bindings. -- axistream-connected: Reference to another node which contains the resources - for the AXI DMA controller used by this device. - If this is specified, the DMA-related resources from that - device (DMA registers and DMA TX/RX interrupts) rather - than this one will be used. - - mdio : Child node for MDIO bus. Must be defined if PHY access is - required through the core's MDIO interface (i.e. always, - unless the PHY is accessed through a different bus). - Non-standard MDIO bus frequency is supported via - "clock-frequency", see mdio.yaml. - - - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X - modes, where "pcs-handle" should be used to point - to the PCS/PMA PHY, and "phy-handle" should point to an - external PHY if exists. - -Example: - axi_ethernet_eth: ethernet@40c00000 { - compatible = "xlnx,axi-ethernet-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0 1>; - clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; - clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; - phy-mode = "mii"; - reg = <0x40c00000 0x40000 0x50c00000 0x40000>; - xlnx,rxcsum = <0x2>; - xlnx,rxmem = <0x800>; - xlnx,txcsum = <0x2>; - phy-handle = <&phy0>; - axi_ethernetlite_0_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: phy@0 { - device_type = "ethernet-phy"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml new file mode 100644 index 000000000000..1d33d80af11c --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXI 1G/2.5G Ethernet Subsystem + +description: | + Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core + provides connectivity to an external ethernet PHY supporting different + interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two + segments of memory for buffering TX and RX, as well as the capability of + offloading TX/RX checksum calculation off the processor. + + Management configuration is done through the AXI interface, while payload is + sent and received through means of an AXI DMA controller. This driver + includes the DMA driver code, so this driver is incompatible with AXI DMA + driver. + +maintainers: + - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> + +properties: + compatible: + enum: + - xlnx,axi-ethernet-1.00.a + - xlnx,axi-ethernet-1.01.a + - xlnx,axi-ethernet-2.01.a + + reg: + description: + Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. + maxItems: 2 + + interrupts: + items: + - description: Ethernet core interrupt + - description: Tx DMA interrupt + - description: Rx DMA interrupt + description: + Ethernet core interrupt is optional. If axistream-connected property is + present DMA node should contains TX/RX DMA interrupts else DMA interrupt + resources are mentioned on ethernet node. + minItems: 1 + + phy-handle: true + + xlnx,rxmem: + description: + Set to allocated memory buffer for Rx/Tx in the hardware. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-mode: + enum: + - mii + - gmii + - rgmii + - sgmii + - 1000BaseX + + xlnx,phy-type: + description: + Do not use, but still accepted in preference to phy-mode. + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,txcsum: + description: + TX checksum offload. 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload and 2 to enable full TX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,rxcsum: + description: + RX checksum offload. 0 or empty for disabling RX checksum offload, + 1 to enable partial RX checksum offload and 2 to enable full RX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,switch-x-sgmii: + type: boolean + description: + Indicate the Ethernet core is configured to support both 1000BaseX and + SGMII modes. If set, the phy-mode should be set to match the mode + selected on core reset (i.e. by the basex_or_sgmii core input line). + + clocks: + items: + - description: Clock for AXI register slave interface. + - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces. + - description: Ethernet reference clock, used by signal delay primitives + and transceivers. + - description: MGT reference clock (used by optional internal PCS/PMA PHY) + + clock-names: + items: + - const: s_axi_lite_clk + - const: axis_clk + - const: ref_clk + - const: mgt_clk + + axistream-connected: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle of AXI DMA controller which contains the resources + used by this device. If this is specified, the DMA-related resources + from that device (DMA registers and DMA TX/RX interrupts) rather than + this one will be used. + + mdio: + type: object + + pcs-handle: + description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point to the PCS/PMA PHY, + and "phy-handle" should point to an external PHY if exists. + maxItems: 1 + +required: + - compatible + - interrupts + - reg + - xlnx,rxmem + - phy-handle + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +additionalProperties: false + +examples: + - | + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <2 0 1>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; + + - | + axi_ethernet_eth1: ethernet@40000000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <0>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x00 0x40000000 0x00 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy1>; + axistream-connected = <&dma>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml index 36def7128fca..13412af7f046 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -36,14 +36,29 @@ properties: et0macaddr: type: object description: First Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false et1macaddr: type: object description: Second Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false et2macaddr: type: object description: Third Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index 9876243ff1e8..99e60d713dac 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) +title: Freescale i.MX On-Chip OTP Controller (OCOTP) maintainers: - Anson Huang <Anson.Huang@nxp.com> @@ -12,7 +12,7 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs. allOf: - $ref: nvmem.yaml# @@ -32,6 +32,7 @@ properties: - fsl,imx7ulp-ocotp - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp + - fsl,imx93-ocotp - const: syscon - items: - enum: @@ -46,12 +47,6 @@ properties: reg: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - clocks: maxItems: 1 @@ -61,21 +56,6 @@ required: - compatible - reg -patternProperties: - "^.*@[0-9a-f]+$": - type: object - - properties: - reg: - maxItems: 1 - description: - Offset and size in bytes within the storage device. - - required: - - reg - - additionalProperties: false - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml new file mode 100644 index 000000000000..e698098450e1 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/fixed-cell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed offset & size NVMEM cell + +maintainers: + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + reg: + maxItems: 1 + + bits: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - minimum: 0 + maximum: 7 + description: + Offset in bit within the address range specified by reg. + - minimum: 1 + description: + Size in bit within the address range specified by reg. + +required: + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml new file mode 100644 index 000000000000..c271537d0714 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/fixed-layout.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM layout for fixed NVMEM cells + +description: + Many NVMEM devices have hardcoded cells layout (offset and size of defined + NVMEM content doesn't change). + + This binding allows defining such NVMEM layout with its cells. It can be used + on top of any NVMEM device. + +maintainers: + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + +properties: + compatible: + const: fixed-layout + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "@[a-f0-9]+$": + type: object + $ref: fixed-cell.yaml + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + calibration@4000 { + reg = <0x4000 0x100>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml index 8512ee538c4c..3b40f7880774 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml @@ -18,16 +18,13 @@ description: | perform their parsing. The nvmem-layout container is here to describe these. oneOf: + - $ref: fixed-layout.yaml - $ref: kontron,sl28-vpd.yaml - $ref: onie,tlv-layout.yaml properties: compatible: true - '#address-cells': false - - '#size-cells': false - required: - compatible diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index d16d42fb98b6..7ec2988b597e 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -27,6 +27,7 @@ properties: - enum: - mediatek,mt7622-efuse - mediatek,mt7623-efuse + - mediatek,mt7986-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index 8938eec22b52..a9b822aeaa7e 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -18,12 +18,6 @@ properties: - fsl,imx23-ocotp - fsl,imx28-ocotp - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - reg: maxItems: 1 @@ -35,7 +29,7 @@ required: - reg - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 75bb93dda9df..980244100690 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -49,23 +49,8 @@ properties: patternProperties: "@[0-9a-f]+(,[0-7])?$": type: object - - properties: - reg: - maxItems: 1 - description: - Offset and size in bytes within the storage device. - - bits: - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - - minimum: 0 - maximum: 7 - description: - Offset in bit within the address range specified by reg. - - minimum: 1 - description: - Size in bit within the address range specified by reg. + $ref: layouts/fixed-cell.yaml + deprecated: true additionalProperties: true @@ -83,24 +68,30 @@ examples: /* ... */ - /* Data cells */ - tsens_calibration: calib@404 { - reg = <0x404 0x10>; - }; - - tsens_calibration_bckp: calib_bckp@504 { - reg = <0x504 0x11>; - bits = <6 128>; - }; - - pvs_version: pvs-version@6 { - reg = <0x6 0x2>; - bits = <7 2>; - }; - - speed_bin: speed-bin@c{ - reg = <0xc 0x1>; - bits = <2 3>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128>; + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2>; + bits = <7 2>; + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + }; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8d8503dd934b..6cd4682a167d 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -18,8 +18,11 @@ properties: - enum: - qcom,apq8064-qfprom - qcom,apq8084-qfprom + - qcom,ipq5332-qfprom + - qcom,ipq6018-qfprom - qcom,ipq8064-qfprom - qcom,ipq8074-qfprom + - qcom,ipq9574-qfprom - qcom,msm8916-qfprom - qcom,msm8974-qfprom - qcom,msm8976-qfprom @@ -64,12 +67,6 @@ properties: power-domains: maxItems: 1 - # Needed if any child nodes are present. - "#address-cells": - const: 1 - "#size-cells": - const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index dce0c7d84ce7..cd980def97b8 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -25,12 +25,6 @@ properties: reg: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - ranges: true required: diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml index 38a39c9b8c1c..1ec0d09bcafa 100644 --- a/Documentation/devicetree/bindings/nvmem/rmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -17,6 +17,7 @@ properties: items: - enum: - raspberrypi,bootloader-config + - raspberrypi,bootloader-public-key - const: nvmem-rmem reg: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml new file mode 100644 index 000000000000..9c6eff788928 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rockchip,otp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip internal OTP (One Time Programmable) memory + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-otp + - rockchip,rk3308-otp + - rockchip,rk3588-otp + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + items: + - const: otp + - const: apb_pclk + - const: phy + - const: arb + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +allOf: + - $ref: nvmem.yaml# + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-otp + - rockchip,rk3308-otp + then: + properties: + clocks: + maxItems: 3 + resets: + maxItems: 1 + reset-names: + items: + - const: phy + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3588-otp + then: + properties: + clocks: + minItems: 4 + resets: + minItems: 3 + reset-names: + items: + - const: otp + - const: apb + - const: arb + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + otp: efuse@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + performance: performance@1e { + reg = <0x1e 0x1>; + bits = <4 3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt deleted file mode 100644 index 40f649f7c2e5..000000000000 --- a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt +++ /dev/null @@ -1,25 +0,0 @@ -Rockchip internal OTP (One Time Programmable) memory device tree bindings - -Required properties: -- compatible: Should be one of the following. - - "rockchip,px30-otp" - for PX30 SoCs. - - "rockchip,rk3308-otp" - for RK3308 SoCs. -- reg: Should contain the registers location and size -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Should be "otp", "apb_pclk" and "phy". -- resets: Must contain an entry for each entry in reset-names. - See ../../reset/reset.txt for details. -- reset-names: Should be "phy". - -See nvmem.txt for more information. - -Example: - otp: otp@ff290000 { - compatible = "rockchip,px30-otp"; - reg = <0x0 0xff290000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, - <&cru PCLK_OTP_PHY>; - clock-names = "otp", "apb_pclk", "phy"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index b8bca0599c45..efccc5aacbe0 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -14,9 +14,6 @@ allOf: - $ref: nvmem.yaml# properties: - "#address-cells": true - "#size-cells": true - compatible: const: socionext,uniphier-efuse diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index 8877c2283e9e..da3f1de7d281 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -28,12 +28,6 @@ properties: clocks: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - thermal-calibration: type: object description: thermal calibration values diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index 9bff8ecb653c..d91b639ae7ae 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -17,20 +17,11 @@ description: properties: clocks: minItems: 3 - items: - - description: PCIe bridge clock. - - description: PCIe bus clock. - - description: PCIe PHY clock. - - description: Additional required clock entry for imx6sx-pcie, - imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + maxItems: 4 clock-names: minItems: 3 - items: - - const: pcie - - const: pcie_bus - - enum: [ pcie_phy, pcie_aux ] - - enum: [ pcie_inbound_axi, pcie_aux ] + maxItems: 4 num-lanes: const: 1 diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index f4a328ec1daa..ee155ed5f181 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -31,6 +31,19 @@ properties: - const: dbi - const: addr_space + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin eDMA interrupter. @@ -49,6 +62,31 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + else: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux + unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2443641754d3..81bbb8728f0f 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -40,6 +40,19 @@ properties: - const: dbi - const: config + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin MSI controller. @@ -77,6 +90,70 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx6sx-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_inbound_axi + + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + + - if: + properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + + - if: + properties: + compatible: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index b3c22ebd156c..811112255d7d 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -13,6 +13,7 @@ properties: compatible: enum: - qcom,sdx55-pcie-ep + - qcom,sdx65-pcie-ep - qcom,sm8450-pcie-ep reg: @@ -109,6 +110,7 @@ allOf: contains: enum: - qcom,sdx55-pcie-ep + - qcom,sdx65-pcie-ep then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml index 88386a6d7011..6b62f6f58efe 100644 --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml @@ -47,7 +47,7 @@ examples: pcie-ep@f8000000 { compatible = "rockchip,rk3399-pcie-ep"; - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; reg-names = "apb-base", "mem-base"; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; @@ -63,6 +63,8 @@ examples: phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; rockchip,max-outbound-regions = <16>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqnb_cpm>; }; }; ... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 24c88942e59e..a4f61ced5e88 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -41,20 +41,24 @@ properties: - const: config clocks: + minItems: 5 items: - description: AHB clock for PCIe master - description: AHB clock for PCIe slave - description: AHB clock for PCIe dbi - description: APB clock for PCIe - description: Auxiliary clock for PCIe + - description: PIPE clock clock-names: + minItems: 5 items: - const: aclk_mst - const: aclk_slv - const: aclk_dbi - const: pclk - const: aux + - const: pipe msi-map: true @@ -70,13 +74,19 @@ properties: maxItems: 1 ranges: - maxItems: 2 + minItems: 2 + maxItems: 3 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 reset-names: - const: pipe + oneOf: + - const: pipe + - items: + - const: pwr + - const: pipe vpcie3v3-supply: true diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 24ddc2855b94..4734be456bde 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CPM Host Controller device tree for Xilinx Versal SoCs maintainers: - - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> + - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> allOf: - $ref: /schemas/pci/pci-bus.yaml# diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml index 50f46a6898b1..4adab0149108 100644 --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml @@ -42,8 +42,8 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> pmu { - #address-cells=<2>; - #size-cells=<2>; + #address-cells = <2>; + #size-cells = <2>; pmu@ff638000 { compatible = "amlogic,g12a-ddr-pmu"; diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index 80a92385367e..e9fad4b3de68 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale(NXP) IMX8 DDR performance monitor +title: Freescale(NXP) IMX8/9 DDR performance monitor maintainers: - Frank Li <frank.li@nxp.com> @@ -19,6 +19,7 @@ properties: - fsl,imx8mm-ddr-pmu - fsl,imx8mn-ddr-pmu - fsl,imx8mp-ddr-pmu + - fsl,imx93-ddr-pmu - items: - enum: - fsl,imx8mm-ddr-pmu diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml index 43a4b880534c..580fbe37b37f 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -115,8 +115,8 @@ allOf: compatible: contains: enum: - - const: brcm,bcm4908-usb-phy - - const: brcm,brcmstb-usb-phy + - brcm,bcm4908-usb-phy + - brcm,brcmstb-usb-phy then: properties: reg: diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt deleted file mode 100644 index 3dc8b3d2ffbb..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt +++ /dev/null @@ -1,15 +0,0 @@ -BROADCOM KONA USB2 PHY - -Required properties: - - compatible: brcm,kona-usb2-phy - - reg: offset and length of the PHY registers - - #phy-cells: must be 0 -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - - usbphy: usb-phy@3f130000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x3f130000 0x28>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml new file mode 100644 index 000000000000..d7faeb81f7a7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family USB 2.0 PHY + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,kona-usb2-phy + + reg: + maxItems: 1 + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml index c9e65a2facd5..c7281a7c8244 100644 --- a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml +++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml @@ -31,6 +31,12 @@ properties: "#phy-cells": const: 0 + cdns,usb2-disconnect-threshold-microvolt: + description: The microvolt threshold value utilized for detecting + USB disconnection event. + enum: [575, 610, 645] + default: 575 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index e6f9f5540cc3..dc3a3f709fea 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -35,6 +35,53 @@ properties: description: A phandle to the regulator for USB VBUS. + fsl,phy-tx-vref-tune-percent: + description: + Tunes the HS DC level relative to the nominal level + minimum: 94 + maximum: 124 + + fsl,phy-tx-rise-tune-percent: + description: + Adjusts the rise/fall time duration of the HS waveform relative to + its nominal value + minimum: 97 + maximum: 103 + + fsl,phy-tx-preemp-amp-tune-microamp: + description: + Adjust amount of current sourced to DPn and DMn after a J-to-K + or K-to-J transition. Default is 0 (disabled). + minimum: 0 + maximum: 1800 + + fsl,phy-tx-vboost-level-microvolt: + description: + Adjust the boosted transmit launch pk-pk differential amplitude + minimum: 880 + maximum: 1120 + + fsl,phy-comp-dis-tune-percent: + description: + Adjust the voltage level used to detect a disconnect event at the host + relative to the nominal value + minimum: 91 + maximum: 115 + + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db: + description: + Adjust TX de-emphasis attenuation in dB at nominal + 3.5dB point as per USB specification + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 36 + + fsl,phy-pcs-tx-swing-full-percent: + description: + Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt + minimum: 0 + maximum: 100 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml new file mode 100644 index 000000000000..f4b1ca2fb562 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS USB Phy Device + +maintainers: + - Xu Yang <xu.yang_2@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-usbphy + - fsl,imx7ulp-usbphy + - fsl,vf610-usbphy + - items: + - enum: + - fsl,imx28-usbphy + - fsl,imx6ul-usbphy + - fsl,imx6sl-usbphy + - fsl,imx6sx-usbphy + - fsl,imx6q-usbphy + - const: fsl,imx23-usbphy + - items: + - const: fsl,imx6sll-usbphy + - const: fsl,imx6ul-usbphy + - const: fsl,imx23-usbphy + - items: + - enum: + - fsl,imx8dxl-usbphy + - fsl,imx8qm-usbphy + - fsl,imx8ulp-usbphy + - const: fsl,imx7ulp-usbphy + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#phy-cells': + const: 0 + + power-domains: + maxItems: 1 + + fsl,anatop: + description: + phandle for anatop register, it is only for imx6 SoC series. + $ref: /schemas/types.yaml#/definitions/phandle + + phy-3p0-supply: + description: + One of USB PHY's power supply. Can be used to keep a good signal + quality. + + fsl,tx-cal-45-dn-ohms: + description: + Resistance (in ohms) of switchable high-speed trimming resistor + connected in parallel with the 45 ohm resistor that terminates + the DN output signal. + minimum: 35 + maximum: 54 + default: 45 + + fsl,tx-cal-45-dp-ohms: + description: + Resistance (in ohms) of switchable high-speed trimming resistor + connected in parallel with the 45 ohm resistor that terminates + the DP output signal. + minimum: 35 + maximum: 54 + default: 45 + + fsl,tx-d-cal: + description: + Current trimming value (as a percentage) of the 17.78 mA TX + reference current. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 79 + maximum: 119 + default: 100 + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + oneOf: + - enum: + - fsl,imx6q-usbphy + - fsl,imx6sl-usbphy + - fsl,imx6sx-usbphy + - fsl,imx6sll-usbphy + - fsl,vf610-usbphy + - items: + - const: fsl,imx6ul-usbphy + - const: fsl,imx23-usbphy + then: + required: + - fsl,anatop + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + fsl,anatop = <&anatop>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml index 5d54b0a0e873..7dd6a4d94b48 100644 --- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -15,7 +15,7 @@ description: | properties: $nodename: - pattern: "combophy(@.*|-[0-9a-f])*$" + pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$" compatible: items: diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 26f2b887cfc1..a63b20dfa4a5 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -26,6 +26,10 @@ properties: - const: mediatek,mt2701-mipi-tx - items: - enum: + - mediatek,mt6795-mipi-tx + - const: mediatek,mt8173-mipi-tx + - items: + - enum: - mediatek,mt8365-mipi-tx - const: mediatek,mt8183-mipi-tx - const: mediatek,mt2701-mipi-tx @@ -83,7 +87,7 @@ examples: clocks = <&clk26m>; clock-output-names = "mipi_tx0_pll"; drive-strength-microamp = <4000>; - nvmem-cells= <&mipi_tx_calibration>; + nvmem-cells = <&mipi_tx_calibration>; nvmem-cell-names = "calibration-data"; #clock-cells = <0>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml index 786cfd71cb7e..3c28ec50f097 100644 --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml @@ -32,15 +32,6 @@ properties: clock-names: const: phy_ref - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - assigned-clock-rates: - maxItems: 1 - "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt deleted file mode 100644 index 70c813b0755f..000000000000 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Freescale MXS USB Phy Device - -Required properties: -- compatible: should contain: - * "fsl,imx23-usbphy" for imx23 and imx28 - * "fsl,imx6q-usbphy" for imx6dq and imx6dl - * "fsl,imx6sl-usbphy" for imx6sl - * "fsl,vf610-usbphy" for Vybrid vf610 - * "fsl,imx6sx-usbphy" for imx6sx - * "fsl,imx7ulp-usbphy" for imx7ulp - * "fsl,imx8dxl-usbphy" for imx8dxl - "fsl,imx23-usbphy" is still a fallback for other strings -- reg: Should contain registers location and length -- interrupts: Should contain phy interrupt -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series - -Optional properties: -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable - high-speed trimming resistor connected in parallel with the 45 ohm resistor - that terminates the DN output signal. Default: 45 -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable - high-speed trimming resistor connected in parallel with the 45 ohm resistor - that terminates the DP output signal. Default: 45 -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of - the 17.78mA TX reference current. Default: 100 - -Example: -usbphy1: usb-phy@20c9000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = <0 44 0x04>; - fsl,anatop = <&anatop>; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml index 9ae514fa7533..d3cd7997879f 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -31,8 +31,14 @@ properties: - const: pipe resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 items: - - description: exclusive PHY reset line + - const: phy + - const: apb rockchip,enable-ssc: type: boolean @@ -78,6 +84,32 @@ required: - rockchip,pipe-phy-grf - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-naneng-combphy + then: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-naneng-combphy + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + required: + - reset-names + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml index c4f8e6ffa5c3..6566353f1a02 100644 --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml @@ -43,6 +43,9 @@ properties: "#phy-cells": const: 0 + power-domains: + maxItems: 1 + vdda-phy-supply: true vdda-pll-supply: true diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 62045dcfb20c..3d42ee3901a1 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -203,6 +203,7 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-qmp-pcie-phy - qcom,sm8250-qmp-gen3x2-pcie-phy - qcom,sm8250-qmp-modem-pcie-phy - qcom,sm8450-qmp-gen4x2-pcie-phy @@ -224,7 +225,6 @@ allOf: compatible: contains: enum: - - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdx55-qmp-pcie-phy - qcom,sm8250-qmp-gen3x1-pcie-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml index 80a5348dbfde..881ba543fd46 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml @@ -160,6 +160,7 @@ allOf: contains: enum: - qcom,msm8998-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy - qcom,sdm845-qmp-ufs-phy - qcom,sm6350-qmp-ufs-phy - qcom,sm8150-qmp-ufs-phy @@ -183,23 +184,6 @@ allOf: compatible: contains: enum: - - qcom,sc8180x-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - qcom,msm8996-qmp-ufs-phy - qcom,sm6115-qmp-ufs-phy then: diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml index e81a38281f8c..4c96dab5b9e3 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml @@ -23,14 +23,12 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - qcom,msm8998-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qmp-usb3-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-phy @@ -253,29 +251,6 @@ allOf: compatible: contains: enum: - - qcom,qcm2290-qmp-usb3-phy - - qcom,sm6115-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy_phy - - const: phy - - - if: - properties: - compatible: - contains: - enum: - qcom,sdm845-qmp-usb3-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8350-qmp-usb3-phy @@ -318,12 +293,10 @@ allOf: enum: - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-phy then: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 543c1a2811a5..95eecbaef05c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -18,13 +18,14 @@ properties: oneOf: - items: - enum: + - qcom,ipq6018-qusb2-phy - qcom,ipq8074-qusb2-phy + - qcom,ipq9574-qusb2-phy - qcom,msm8953-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy - qcom,qcm2290-qusb2-phy - qcom,sdm660-qusb2-phy - - qcom,ipq6018-qusb2-phy - qcom,sm4250-qusb2-phy - qcom,sm6115-qusb2-phy - items: diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml new file mode 100644 index 000000000000..b9107759b2a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SerDes/SGMII ethernet PHY controller + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + The SerDes PHY sits between the MAC and the external PHY and provides + separate Rx Tx lines. + +properties: + compatible: + const: qcom,sa8775p-dwmac-sgmii-phy + + reg: + items: + - description: serdes + + clocks: + maxItems: 1 + + clock-names: + const: sgmi_ref + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + serdes_phy: phy@8901000 { + compatible = "qcom,sa8775p-dwmac-sgmii-phy"; + reg = <0x08901000 0xe10>; + clocks = <&gcc GCC_SGMI_CLKREF_EN>; + clock-names = "sgmi_ref"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index 0ef2c9b9d466..d30734338888 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -61,6 +61,10 @@ properties: power-domains: maxItems: 1 + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + resets: items: - description: reset of phy block. @@ -251,6 +255,8 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; + orientation-switch; + usb3-phy@200 { reg = <0x200 0x128>, <0x400 0x200>, diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index 94c0fab065a8..a1897a7606df 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -78,9 +78,9 @@ allOf: then: properties: clocks: - maxItems: 3 + minItems: 3 clock-names: - maxItems: 3 + minItems: 3 else: properties: clocks: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 16fce1038285..f99fbbcd68fb 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -16,7 +16,11 @@ description: properties: compatible: enum: + - qcom,ipq9574-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sm6115-qmp-usb3-phy reg: maxItems: 1 @@ -25,11 +29,7 @@ properties: maxItems: 4 clock-names: - items: - - const: aux - - const: ref - - const: com_aux - - const: pipe + maxItems: 4 power-domains: maxItems: 1 @@ -60,7 +60,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -69,6 +68,60 @@ required: - clock-output-names - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq9574-qmp-usb3-phy + then: + properties: + clock-names: + items: + - const: aux + - const: ref + - const: cfg_ahb + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_ahb + - const: ref + - const: com_aux + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: com_aux + - const: pipe + required: + - power-domains + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 3cd5fc3e8fab..ef1c02d8ac88 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -60,6 +60,26 @@ properties: description: See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the DisplayPort controller + required: - compatible - reg @@ -98,6 +118,37 @@ examples: vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + #clock-cells = <1>; #phy-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&typec_connector_ss>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&dwc3_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml index aa97478dd016..f042d6af1594 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml @@ -13,7 +13,9 @@ if: properties: compatible: contains: - const: qcom,usb-hs-phy-apq8064 + enum: + - qcom,usb-hs-phy-apq8064 + - qcom,usb-hs-phy-msm8960 then: properties: resets: @@ -40,6 +42,7 @@ properties: - qcom,usb-hs-phy-apq8064 - qcom,usb-hs-phy-msm8226 - qcom,usb-hs-phy-msm8916 + - qcom,usb-hs-phy-msm8960 - qcom,usb-hs-phy-msm8974 - const: qcom,usb-hs-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index a26524b7e7b7..0f200e3f97a9 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -20,6 +20,7 @@ properties: - qcom,usb-snps-femto-v2-phy - items: - enum: + - qcom,sa8775p-usb-hs-phy - qcom,sc8280xp-usb-hs-phy - const: qcom,usb-snps-hs-5nm-phy - items: diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index e2b861ce16d8..774c3c269c40 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -37,7 +37,8 @@ right representation of the pin. Optional properties: - GENERIC_PINCONFIG: generic pinconfig options to use: - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, - input-schmitt-enable, input-debounce, output-low, output-high. + drive-push-pull input-schmitt-enable, input-debounce, output-low, + output-high. - for microchip,sama7g5-pinctrl only: - slew-rate: 0 - disabled, 1 - enabled (default) - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 7f4f36a58e56..739a08f00467 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 FPIOA maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml new file mode 100644 index 000000000000..f3deda9f7127 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 AON Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux-aon + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2, + can1_din_paa3, can0_stb_paa4, can0_en_paa5, + soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + sce_error_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7, + hdmi_cec_pgg0, + # drive groups + drive_touch_clk_pcc4, drive_uart3_rx_pcc6, + drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2, + drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2, + drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3, + drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0, + drive_spi2_miso_pcc1, drive_can1_dout_paa2, + drive_can1_din_paa3, drive_can0_dout_paa0, + drive_can0_din_paa1, drive_can0_stb_paa4, + drive_can0_en_paa5, drive_soc_gpio49_paa6, + drive_can0_err_paa7, drive_can1_stb_pbb0, + drive_can1_en_pbb1, drive_soc_gpio50_pbb2, + drive_can1_err_pbb3, drive_sce_error_pee0, + drive_batt_oc_pee3, drive_bootv_ctl_n_pee7, + drive_power_on_pee4, drive_soc_gpio26_pee5, + drive_soc_gpio27_pee6, drive_ao_retention_n_pee2, + drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@c300000 { + compatible = "nvidia,tegra234-pinmux-aon"; + reg = <0xc300000 0x4000>; + + pinctrl-names = "cec"; + pinctrl-0 = <&cec_state>; + + cec_state: pinmux-cec { + cec { + nvidia,pins = "hdmi_cec_pgg0"; + nvidia,function = "gp"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml new file mode 100644 index 000000000000..4f9de78085e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + # We would typically use unevaluatedProperties here but that has the + # downside that all the properties in the common bindings become valid + # for all chip generations. In this case, however, we want the per-SoC + # bindings to be able to override which of the common properties are + # allowed, since not all pinmux generations support the same sets of + # properties. This way, the common bindings define the format of the + # properties but the per-SoC bindings define which of them apply to a + # given chip. + additionalProperties: false + properties: + nvidia,function: + enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, + eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, + pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, + sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, + usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, + i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, + dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, + ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, + displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, + tsc_alt, istctrl, vi1_alt, dspk1, igpu ] + + # out of the common properties, only these are allowed for Tegra234 + nvidia,pins: true + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +required: + - compatible + - reg + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml new file mode 100644 index 000000000000..17b865ecfcda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0, + qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2, + soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5, + soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0, + soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1, + soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + cpu_pwr_req_pi5, soc_gpio07_pi6, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5, + soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0, + soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3, + dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6, + dp_aux_ch3_p_pn7, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6, + pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1, + soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4, + soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7, + soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0, + cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, + uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2, + spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5, + soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0, + soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3, + ufs0_ref_clk_pae0, ufs0_rst_n_pae1, + pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1, + pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3, + pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1, + pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3, + pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5, + pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7, + sdmmc1_comp, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio08_pb0, drive_soc_gpio36_pm5, + drive_soc_gpio53_pm6, drive_soc_gpio55_pm4, + drive_soc_gpio38_pm7, drive_soc_gpio39_pn1, + drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0, + drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2, + drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3, + drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5, + drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7, + drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0, + drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2, + drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6, + drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0, + drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2, + drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4, + drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra234-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pexrst { + nvidia,pins = "pex_l5_rst_n_paf1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml new file mode 100644 index 000000000000..fad0118fd521 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5018 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC. + +properties: + compatible: + const: qcom,ipq5018-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 24 + + gpio-line-names: + maxItems: 47 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5018-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$" + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, + audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd, + audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0, + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1, + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1, + blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng, + cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, + gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio, + pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test, + prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, + qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd, + wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 47>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + uart-w-state { + rx-pins { + pins = "gpio33"; + function = "blsp1_uart1"; + bias-pull-down; + }; + + tx-pins { + pins = "gpio34"; + function = "blsp1_uart1"; + bias-pull-down; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index 673713debac2..e5e9962b2174 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -86,19 +87,9 @@ $defs: rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, wci20, wci21, wsa_swrm ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index eaadd5a9a445..8aaf50181cef 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -49,6 +49,7 @@ properties: - qcom,pm8921-gpio - qcom,pm8941-gpio - qcom,pm8950-gpio + - qcom,pm8953-gpio - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio @@ -175,6 +176,7 @@ allOf: - qcom,pm8350b-gpio - qcom,pm8550ve-gpio - qcom,pm8950-gpio + - qcom,pm8953-gpio - qcom,pmi632-gpio then: properties: @@ -434,6 +436,7 @@ $defs: - gpio1-gpio44 for pm8921 - gpio1-gpio36 for pm8941 - gpio1-gpio8 for pm8950 (hole on gpio3) + - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6) - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index c91d3e3a094b..80f960671857 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -144,8 +144,9 @@ $defs: enum: [0, 1, 2, 3, 4, 5, 6, 7] qcom,paired: - - description: - Indicates that the pin should be operating in paired mode. + type: boolean + description: + Indicates that the pin should be operating in paired mode. required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index 032763649336..c323f6d495a4 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -45,6 +45,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,19 +82,9 @@ $defs: uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index 4ae39fc7894a..4bd6d7977d3e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -104,20 +105,9 @@ $defs: usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac, vsense_trigger ] - bias-bus-hold: true - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 2ef793ae4038..27319782d94b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -85,7 +85,7 @@ $defs: qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq, dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml new file mode 100644 index 000000000000..7cb96aa75b08 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX75 TLMM block + +maintainers: + - Rohit Agarwal <quic_rohiagar@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdx75-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 67 + + gpio-line-names: + maxItems: 133 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx75-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx75-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx75-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2, + coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist, + ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg, + emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc, + eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk, + gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist, + ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens, + native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e, + pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync, + pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, + qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss, + qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira, + qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3, + qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc, + rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb, + sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n, + spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + usb2phy_ac_en, vsense_trigger_mirnat] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + bias-disable; + }; + + tx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml index a57d44efe5bd..ede0f3acad9c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -102,19 +103,9 @@ $defs: wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 1ab0f8dde477..2120ef71a78d 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -27,6 +27,8 @@ properties: - st,stm32mp135-pinctrl - st,stm32mp157-pinctrl - st,stm32mp157-z-pinctrl + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl '#address-cells': const: 1 @@ -56,7 +58,7 @@ properties: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8] + enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800] patternProperties: '^gpio@[0-9a-f]*$': diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index 598a042850b8..b85f9e36ce4b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 2722dc7bb03d..24ad0614e61b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx ZynqMP Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> - - Rajan Vaja <rajan.vaja@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index afad3135ed67..f9c211a9a938 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -29,6 +29,7 @@ properties: - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd - qcom,qdu1000-rpmhpd + - qcom,sa8155p-rpmhpd - qcom,sa8540p-rpmhpd - qcom,sa8775p-rpmhpd - qcom,sdm660-rpmpd diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml new file mode 100644 index 000000000000..f559a2cfd82e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + enum: + - atmel,at91sam9260-shdwc + - atmel,at91sam9rl-shdwc + - atmel,at91sam9x5-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + atmel,wakeup-mode: + description: operation mode of the wakeup mode + $ref: /schemas/types.yaml#/definitions/string + enum: [ none, high, low, any ] + + atmel,wakeup-counter: + description: counter on wake-up 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,at91sam9x5-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + + - if: + properties: + compatible: + contains: + const: atmel,at91sam9260-shdwc + then: + properties: + atmel,wakeup-rtc-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml new file mode 100644 index 000000000000..8c58e12cdb60 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + oneOf: + - items: + - const: microchip,sama7g5-shdwc + - const: syscon + - enum: + - atmel,sama5d2-shdwc + - microchip,sam9x60-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + debounce-delay-us: + description: + Minimum wake-up inputs debouncer period in microseconds. It is usually a + board-related property. + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + +patternProperties: + "^input@[0-15]$": + description: + Wake-up input nodes. These are usually described in the "board" part of + the Device Tree. Note also that input 0 is linked to the wake-up pin and + is frequently used. + type: object + properties: + reg: + description: contains the wake-up input index + minimum: 0 + maximum: 15 + + atmel,wakeup-active-high: + description: + The corresponding wake-up input described by the child forces the + wake-up of the core power supply on a high level. The default is to + be active low. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt deleted file mode 100644 index 93f31ca1ef4b..000000000000 --- a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Kona Family Reset Manager ----------------------------------- - -The reset manager is used on the Broadcom BCM21664 SoC. - -Required properties: - - compatible: brcm,bcm21664-resetmgr - - reg: memory address & range - -Example: - brcm,resetmgr@35001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x35001f00 0x24>; - }; diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml new file mode 100644 index 000000000000..3e28a59d718f --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family reset manager + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm21664-resetmgr + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + reset-controller@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt deleted file mode 100644 index 752d6126d5da..000000000000 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt +++ /dev/null @@ -1,26 +0,0 @@ -NVMEM reboot mode driver - -This driver gets reboot mode magic value from reboot-mode driver -and stores it in a NVMEM cell named "reboot-mode". Then the bootloader -can read it and take different action according to the magic -value stored. - -Required properties: -- compatible: should be "nvmem-reboot-mode". -- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. -- nvmem-cell-names: Should be "reboot-mode". - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - reboot-mode { - compatible = "nvmem-reboot-mode"; - nvmem-cells = <&reboot_mode>; - nvmem-cell-names = "reboot-mode"; - - mode-normal = <0xAAAA5501>; - mode-bootloader = <0xBBBB5500>; - mode-recovery = <0xCCCC5502>; - mode-test = <0xDDDD5503>; - }; diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml new file mode 100644 index 000000000000..14a262bcbf7c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic NVMEM reboot mode + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + This driver gets the reboot mode magic value from the reboot-mode driver + and stores it in the NVMEM cell named "reboot-mode". The bootloader can + then read it and take different action according to the value. + +properties: + compatible: + const: nvmem-reboot-mode + + nvmem-cells: + description: + A phandle pointing to the nvmem-cells node where the vendor-specific + magic value representing the reboot mode is stored. + maxItems: 1 + + nvmem-cell-names: + items: + - const: reboot-mode + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index d96170eecbd2..5e460128b0d1 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,pm8916-pon + - qcom,pm8941-pon - qcom,pms405-pon - qcom,pm8998-pon - qcom,pmk8350-pon @@ -56,7 +57,6 @@ required: unevaluatedProperties: false allOf: - - $ref: reboot-mode.yaml# - if: properties: compatible: @@ -66,12 +66,30 @@ allOf: - qcom,pms405-pon - qcom,pm8998-pon then: + allOf: + - $ref: reboot-mode.yaml# + + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + + # Special case for pm8941, which doesn't store reset mode + - if: + properties: + compatible: + contains: + const: qcom,pm8941-pon + then: properties: reg: maxItems: 1 reg-names: items: - const: pon + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml index 1f9a2aac53c0..f2ffdd29d52a 100644 --- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml +++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Restart and shutdown handler generic binding +title: Restart and shutdown handler Common Properties maintainers: - Sebastian Reichel <sre@kernel.org> diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml index 11f1f98c1cdc..45792e216981 100644 --- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq MPSoC Power Management maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | The zynqmp-power node describes the power management configurations. diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml index 82f382a7ffb3..4fe9c3705265 100644 --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -68,11 +68,29 @@ properties: Interrupt sends an active low, 256 μs pulse to host to report the charger device status and faults. + ti,no-thermistor: + type: boolean + description: Indicates that no thermistor is connected to the TS pin + required: - compatible - reg - monitored-battery +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,bq25600 + - ti,bq25601 + - ti,bq25600d + - ti,bq25601d + then: + properties: + ti,no-thermistor: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml new file mode 100644 index 000000000000..277c47e048b6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2" + +maintainers: + - Caleb Connolly <caleb.connolly@linaro.org> + +properties: + compatible: + enum: + - qcom,pmi8998-charger + - qcom,pm660-charger + + reg: + maxItems: 1 + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: usb-plugin + - const: bat-ov + - const: wdog-bark + - const: usbin-icl-change + + io-channels: + items: + - description: USB in current in uA + - description: USB in voltage in uV + + io-channel-names: + items: + - const: usbin_i + - const: usbin_v + + monitored-battery: + description: phandle to the simple-battery node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <4>; + + charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", + "usbin_v"; + + monitored-battery = <&battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml index 756c16d1727d..b5d8888d03d2 100644 --- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml @@ -26,7 +26,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml new file mode 100644 index 000000000000..5b3edd79a523 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 PMIC Battery Charger + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + The battery charger of the multifunction device RT5033 has to be instantiated + under sub-node named "charger" using the following format. + +properties: + compatible: + const: richtek,rt5033-charger + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the monitored battery according to battery.yaml. The battery + node needs to contain five parameters. + + precharge-current-microamp: + Current of pre-charge mode. The pre-charge current levels are 350 mA + to 650 mA programmed by I2C per 100 mA. + + constant-charge-current-max-microamp: + Current of fast-charge mode. The fast-charge current levels are 700 mA + to 2000 mA programmed by I2C per 100 mA. + + charge-term-current-microamp: + This property is end of charge current. Its level ranges from 150 mA + to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and + 600 mA in 100 mA steps. + + precharge-upper-limit-microvolt: + Voltage of pre-charge mode. If the battery voltage is below the pre-charge + threshold voltage, the charger is in pre-charge mode with pre-charge + current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V. + + constant-charge-voltage-max-microvolt: + Battery regulation voltage of constant voltage mode. This voltage levels + from 3.65 V to 4.4 V by I2C per 0.025 V. + + richtek,usb-connector: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to a USB connector according to usb-connector.yaml. The connector + should be a child of the extcon device. + +required: + - monitored-battery + +additionalProperties: false + +examples: + - | + charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml index 3ce648dd91bd..34b7959d6772 100644 --- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml @@ -22,6 +22,7 @@ properties: compatible: oneOf: - enum: + - x-powers,axp192-usb-power-supply - x-powers,axp202-usb-power-supply - x-powers,axp221-usb-power-supply - x-powers,axp223-usb-power-supply diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml index ab45df80345d..d84268b59784 100644 --- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml @@ -11,7 +11,7 @@ maintainers: - Claudiu Beznea <claudiu.beznea@microchip.com> allOf: - - $ref: "pwm.yaml#" + - $ref: pwm.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index b3da4e629341..c01dff3b7f84 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -43,6 +43,7 @@ properties: - fsl,imx8mn-pwm - fsl,imx8mp-pwm - fsl,imx8mq-pwm + - fsl,imx8qxp-pwm - const: fsl,imx27-pwm reg: @@ -61,6 +62,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml index 8e176ba7a525..0fbe8a6469eb 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7623-pwm - mediatek,mt7628-pwm - mediatek,mt7629-pwm + - mediatek,mt7981-pwm - mediatek,mt7986-pwm - mediatek,mt8183-pwm - mediatek,mt8365-pwm diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index 0088bc8e7c54..153e146df7d4 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -22,7 +22,9 @@ properties: - mediatek,mt8173-disp-pwm - mediatek,mt8183-disp-pwm - items: - - const: mediatek,mt8167-disp-pwm + - enum: + - mediatek,mt6795-disp-pwm + - mediatek,mt8167-disp-pwm - const: mediatek,mt8173-disp-pwm - items: - enum: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index a34cbc13f691..6ffbed204c25 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -25,7 +25,7 @@ properties: const: 3 fsl,pwm-number: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the number of PWM devices required: diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt deleted file mode 100644 index f5753b3f79df..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt +++ /dev/null @@ -1,30 +0,0 @@ -BCM2835 PWM controller (Raspberry Pi controller) - -Required properties: -- compatible: should be "brcm,bcm2835-pwm" -- reg: physical base address and length of the controller's registers -- clocks: This clock defines the base clock frequency of the PWM hardware - system, the period and the duty_cycle of the PWM signal is a multiple of - the base period. -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of - the cells format. - -Examples: - -pwm@2020c000 { - compatible = "brcm,bcm2835-pwm"; - reg = <0x2020c000 0x28>; - clocks = <&clk_pwm>; - #pwm-cells = <3>; -}; - -clocks { - .... - clk_pwm: pwm { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-frequency = <9200000>; - }; - .... -}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml new file mode 100644 index 000000000000..15e7fd98defc --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 PWM controller (Raspberry Pi controller) + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: brcm,bcm2835-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + - "#pwm-cells" + +additionalProperties: false + +examples: + - | + pwm@2020c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x2020c000 0x28>; + clocks = <&clk_pwm>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index 3c01f85029e5..abd9fa873354 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -13,7 +13,7 @@ select: false properties: $nodename: - pattern: "^pwm(@.*|-[0-9a-f])*$" + pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$" "#pwm-cells": description: diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml index 4c8097010687..6b6a302a175c 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -35,6 +35,7 @@ properties: - renesas,pwm-r8a77980 # R-Car V3H - renesas,pwm-r8a77990 # R-Car E3 - renesas,pwm-r8a77995 # R-Car D3 + - renesas,pwm-r8a779a0 # R-Car V3U - renesas,pwm-r8a779g0 # R-Car V4H - const: renesas,pwm-rcar diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml new file mode 100644 index 000000000000..9e36d5467b56 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Buck Converter for MAX77540/MAX77541 + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + This is a part of device tree bindings for ADI MAX77540/MAX77541 + + The buck converter is represented as a sub-node of the PMIC node on the device tree. + + The device has two buck regulators. + See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for + additional information and example. + +patternProperties: + "^buck[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Buck regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 300000 + regulator-max-microvolt: + maximum: 5200000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt index 7034cdca54e0..b6384306db5c 100644 --- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -8,15 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, - buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, - ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, - ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, - ldo_vsim2 + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example: @@ -305,15 +304,8 @@ Example: regulator-enable-ramp-delay = <120>; }; - mt6358_vcn33_bt_reg: ldo_vcn33_bt { - regulator-name = "vcn33_bt"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { - regulator-name = "vcn33_wifi"; + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3500000>; regulator-enable-ramp-delay = <270>; @@ -354,17 +346,5 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; - - mt6358_vcore_sshub_reg: buck_vcore_sshub { - regulator-name = "vcore_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; - - mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { - regulator-name = "vsram_others_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index 67a30b23b92c..e384e4953f0a 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -36,6 +36,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + fsl,pfuze-support-disable-sw: $ref: /schemas/types.yaml#/definitions/flag description: | diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml index 7e58471097f8..80ecf938b749 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml @@ -64,6 +64,7 @@ properties: defined, <100> is assumed, meaning that pwm-dutycycle-range contains values expressed in percent. + $ref: /schemas/types.yaml#/definitions/uint32 default: 100 pwm-dutycycle-range: diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index b1cff3adb21b..89c564dfa5db 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -14,6 +14,9 @@ description: | regulator will be enabled in situations where the device is required to provide power to the connected peripheral. +allOf: + - $ref: regulator.yaml# + properties: compatible: enum: @@ -25,8 +28,11 @@ properties: required: - compatible + - reg + - regulator-min-microamp + - regulator-max-microamp -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -36,6 +42,8 @@ examples: pm8150b_vbus: usb-vbus-regulator@1100 { compatible = "qcom,pm8150b-vbus-reg"; reg = <0x1100>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; }; }; ... diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml new file mode 100644 index 000000000000..97cff71d2967 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RAA215300 Power Management Integrated Circuit (PMIC) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for + 32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4, + and LPDDR4 memory power requirements. The internally compensated regulators, + built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell + battery charger provide a highly integrated, small footprint power solution + ideal for System-On-Module (SOM) applications. A spread spectrum feature + provides an ease-of-use solution for noise-sensitive audio or RF applications. + + This device exposes two devices via I2C. One for the integrated RTC IP, and + one for everything else. + + Link to datasheet: + https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc + +properties: + compatible: + enum: + - renesas,raa215300 + + reg: + maxItems: 2 + + reg-names: + items: + - const: main + - const: rtc + + interrupts: + maxItems: 1 + + clocks: + description: | + The clocks are optional. The RTC is disabled, if no clocks are + provided(either xin or clkin). + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml new file mode 100644 index 000000000000..386989544dac --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator + +maintainers: + - MÃ¥rten Lindahl <marten.lindahl@axis.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - ti,tps62870 + - ti,tps62871 + - ti,tps62872 + - ti,tps62873 + + reg: + maxItems: 1 + + regulator-initial-mode: + enum: [ 1, 2 ] + description: 1 - Forced PWM mode, 2 - Low power mode + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@41 { + compatible = "ti,tps62873"; + reg = <0x41>; + regulator-name = "+0.75V"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1675000>; + regulator-initial-mode = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml index 3100cb870170..76e8ca44906a 100644 --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml @@ -75,7 +75,7 @@ additionalProperties: false examples: - | remoteproc@1c { - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; reg = <0x1c 0x8>, <0x38 0x8>; reg-names = "remap", "cpu"; resets = <&media_cpu_reset>; diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 959a56f1b6c7..370af61d8f28 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -25,7 +25,14 @@ properties: maxItems: 3 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 + + reset-names: + items: + - const: mcu_rst + - const: hold_boot + minItems: 1 st,syscfg-holdboot: description: remote processor reset hold boot @@ -37,6 +44,7 @@ properties: - description: The field mask of the hold boot st,syscfg-tz: + deprecated: true description: Reference to the system configuration which holds the RCC trust zone mode $ref: /schemas/types.yaml#/definitions/phandle-array @@ -135,22 +143,48 @@ required: - compatible - reg - resets - - st,syscfg-holdboot - - st,syscfg-tz + +allOf: + - if: + properties: + reset-names: + not: + contains: + const: hold_boot + then: + required: + - st,syscfg-holdboot + else: + properties: + st,syscfg-holdboot: false additionalProperties: false examples: - | #include <dt-bindings/reset/stm32mp1-resets.h> - m4_rproc: m4@10000000 { + m4@10000000 { compatible = "st,stm32mp1-m4"; reg = <0x10000000 0x40000>, <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; + /* Hold boot managed using system config*/ st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; + }; + - | + #include <dt-bindings/reset/stm32mp1-resets.h> + m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + /* Hold boot managed using SCMI reset controller */ + resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>; + reset-names = "mcu_rst", "hold_boot"; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; }; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml index c6d86964b72a..35f0bb38f7b2 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Common TI PRU Consumer Binding +title: TI PRU Consumer Common Properties maintainers: - Suman Anna <s-anna@ti.com> diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml index 05b6648b3458..851ec24d6142 100644 --- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: /reserved-memory framebuffer node bindings +title: /reserved-memory framebuffer node maintainers: - devicetree-spec@vger.kernel.org diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml index ee8a2dcf5dfa..0c0135964b91 100644 --- a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml +++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Reset Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 reset controller driver which supports the SoC diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml new file mode 100644 index 000000000000..34c5c1c08ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Reset Controller + +maintainers: + - Chi-Fang Li <cfli0@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +description: + The system reset controller can be used to reset various peripheral + controllers in MA35D1 SoC. + +properties: + compatible: + items: + - const: nuvoton,ma35d1-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + # system reset controller node: + - | + + system-management@40460000 { + compatible = "nuvoton,ma35d1-reset"; + reg = <0x40460000 0x200>; + #reset-cells = <1>; + }; +... + diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt deleted file mode 100644 index d27ccb5d04fc..000000000000 --- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt +++ /dev/null @@ -1,32 +0,0 @@ -Oxford Semiconductor OXNAS SoC Family RESET Controller -================================================ - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: For OX810SE, should be "oxsemi,ox810se-reset" - For OX820, should be "oxsemi,ox820-reset" -- #reset-cells: 1, see below - -Parent node should have the following properties : -- compatible: For OX810SE, should be : - "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - For OX820, should be : - "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" - -Reset indices are in dt-bindings include files : -- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h -- For OX820: include/dt-bindings/reset/oxsemi,ox820.h - -example: - -sys: sys-ctrl@000000 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt deleted file mode 100644 index ed836868dbf1..000000000000 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt +++ /dev/null @@ -1,55 +0,0 @@ --------------------------------------------------------------------------- - = Zynq UltraScale+ MPSoC and Versal reset driver binding = --------------------------------------------------------------------------- -The Zynq UltraScale+ MPSoC and Versal has several different resets. - -See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information -about zynqmp resets. - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform - "xlnx,versal-reset" for Versal platform -- #reset-cells: Specifies the number of cells needed to encode reset - line, should be 1 - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_reset: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - }; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indices for Zynq UltraScale+ MPSoC see -<dt-bindings/reset/xlnx-zynqmp-resets.h> -For list of all valid reset indices for Versal see -<dt-bindings/reset/xlnx-versal-resets.h> - -Example: - -serdes: zynqmp_phy@fd400000 { - ... - - resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - reset-names = "sata_rst"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml new file mode 100644 index 000000000000..0d50f6a54af3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC and Versal reset + +maintainers: + - Piyush Mehta <piyush.mehta@amd.com> + +description: | + The Zynq UltraScale+ MPSoC and Versal has several different resets. + + The PS reset subsystem is responsible for handling the external reset + input to the device and that all internal reset requirements are met + for the system (as a whole) and for the functional units. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. Device nodes that need access to reset + lines should specify them as a reset phandle in their corresponding + node as specified in reset.txt. + + For list of all valid reset indices for Zynq UltraScale+ MPSoC + <dt-bindings/reset/xlnx-zynqmp-resets.h> + + For list of all valid reset indices for Versal + <dt-bindings/reset/xlnx-versal-resets.h> + +properties: + compatible: + enum: + - xlnx,zynqmp-reset + - xlnx,versal-reset + + "#reset-cells": + const: 1 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml index f8f3f286bd55..41fd11f70a49 100644 --- a/Documentation/devicetree/bindings/riscv/canaan.yaml +++ b/Documentation/devicetree/bindings/riscv/canaan.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan SoC-based boards maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Kendryte K210 SoC-based boards diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 3d2934b15e80..38c0b5213736 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -23,6 +23,10 @@ description: | two cores, each of which has two hyperthreads, could be described as having four harts. +allOf: + - $ref: /schemas/cpu.yaml# + - $ref: extensions.yaml + properties: compatible: oneOf: @@ -61,7 +65,7 @@ properties: hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - riscv,sv32 - riscv,sv39 @@ -79,25 +83,9 @@ properties: description: The blocksize in bytes for the Zicboz cache operations. - riscv,isa: - description: - Identifies the specific RISC-V instruction set architecture - supported by the hart. These are documented in the RISC-V - User-Level ISA document, available from - https://riscv.org/specifications/ - - Due to revisions of the ISA specification, some deviations - have arisen over time. - Notably, riscv,isa was defined prior to the creation of the - Zicsr and Zifencei extensions and thus "i" implies - "zicsr_zifencei". - - While the isa strings in ISA specification are case - insensitive, letters in the riscv,isa string must be all - lowercase to simplify parsing. - $ref: "/schemas/types.yaml#/definitions/string" - pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ - + # RISC-V has multiple properties for cache op block sizes as the sizes + # differ between individual CBO extensions + cache-op-block-size: false # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false @@ -120,7 +108,7 @@ properties: - interrupt-controller cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 description: | @@ -133,11 +121,20 @@ properties: DMIPS/MHz, relative to highest capacity-dmips-mhz in the system. +anyOf: + - required: + - riscv,isa + - required: + - riscv,isa-base + +dependencies: + riscv,isa-base: [ "riscv,isa-extensions" ] + riscv,isa-extensions: [ "riscv,isa-base" ] + required: - - riscv,isa - interrupt-controller -additionalProperties: true +unevaluatedProperties: false examples: - | @@ -154,7 +151,9 @@ examples: i-cache-sets = <128>; i-cache-size = <16384>; reg = <0>; - riscv,isa = "rv64imac"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "c"; + cpu_intc0: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -177,8 +176,10 @@ examples: i-tlb-size = <32>; mmu-type = "riscv,sv39"; reg = <1>; - riscv,isa = "rv64imafdc"; tlb-split; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c"; + cpu_intc1: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -196,8 +197,10 @@ examples: device_type = "cpu"; reg = <0>; compatible = "riscv"; - riscv,isa = "rv64imafdc"; mmu-type = "riscv,sv48"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c"; + interrupt-controller { #interrupt-cells = <1>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml new file mode 100644 index 000000000000..cc1f546fdbdc --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/extensions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V ISA extensions + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Palmer Dabbelt <palmer@sifive.com> + - Conor Dooley <conor@kernel.org> + +description: | + RISC-V has a large number of extensions, some of which are "standard" + extensions, meaning they are ratified by RISC-V International, and others + are "vendor" extensions. + This document defines properties that indicate whether a hart supports a + given extension. + + Once a standard extension has been ratified, no changes in behaviour can be + made without the creation of a new extension. + The properties for standard extensions therefore map to their originally + ratified states, with the exception of the I, Zicntr & Zihpm extensions. + See the "i" property for more information. + +select: + properties: + compatible: + contains: + const: riscv + +properties: + riscv,isa: + description: + Identifies the specific RISC-V instruction set architecture + supported by the hart. These are documented in the RISC-V + User-Level ISA document, available from + https://riscv.org/specifications/ + + Due to revisions of the ISA specification, some deviations + have arisen over time. + Notably, riscv,isa was defined prior to the creation of the + Zicntr, Zicsr, Zifencei and Zihpm extensions and thus "i" + implies "zicntr_zicsr_zifencei_zihpm". + + While the isa strings in ISA specification are case + insensitive, letters in the riscv,isa string must be all + lowercase. + $ref: /schemas/types.yaml#/definitions/string + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ + deprecated: true + + riscv,isa-base: + description: + The base ISA implemented by this hart, as described by the 20191213 + version of the unprivileged ISA specification. + enum: + - rv32i + - rv64i + + riscv,isa-extensions: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + description: Extensions supported by the hart. + items: + anyOf: + # single letter extensions, in canonical order + - const: i + description: | + The base integer instruction set, as ratified in the 20191213 + version of the unprivileged ISA specification. + + This does not include Chapter 10, "Counters", which was moved into + the Zicntr and Zihpm extensions after the ratification of the + 20191213 version of the unprivileged specification. + + - const: m + description: + The standard M extension for integer multiplication and division, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: a + description: + The standard A extension for atomic instructions, as ratified in the + 20191213 version of the unprivileged ISA specification. + + - const: f + description: + The standard F extension for single-precision floating point, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: d + description: + The standard D extension for double-precision floating-point, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: q + description: + The standard Q extension for quad-precision floating-point, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: c + description: + The standard C extension for compressed instructions, as ratified in + the 20191213 version of the unprivileged ISA specification. + + - const: v + description: + The standard V extension for vector operations, as ratified + in-and-around commit 7a6c8ae ("Fix text that describes vfmv.v.f + encoding") of the riscv-v-spec. + + - const: h + description: + The standard H extension for hypervisors as ratified in the 20191213 + version of the privileged ISA specification. + + # multi-letter extensions, sorted alphanumerically + - const: smaia + description: | + The standard Smaia supervisor-level extension for the advanced + interrupt architecture for machine-mode-visible csr and behavioural + changes to interrupts as frozen at commit ccbddab ("Merge pull + request #42 from riscv/jhauser-2023-RC4") of riscv-aia. + + - const: ssaia + description: | + The standard Ssaia supervisor-level extension for the advanced + interrupt architecture for supervisor-mode-visible csr and + behavioural changes to interrupts as frozen at commit ccbddab + ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia. + + - const: sscofpmf + description: | + The standard Sscofpmf supervisor-level extension for count overflow + and mode-based filtering as ratified at commit 01d1df0 ("Add ability + to manually trigger workflow. (#2)") of riscv-count-overflow. + + - const: sstc + description: | + The standard Sstc supervisor-level extension for time compare as + ratified at commit 3f9ed34 ("Add ability to manually trigger + workflow. (#2)") of riscv-time-compare. + + - const: svinval + description: + The standard Svinval supervisor-level extension for fine-grained + address-translation cache invalidation as ratified in the 20191213 + version of the privileged ISA specification. + + - const: svnapot + description: + The standard Svnapot supervisor-level extensions for napot + translation contiguity as ratified in the 20191213 version of the + privileged ISA specification. + + - const: svpbmt + description: + The standard Svpbmt supervisor-level extensions for page-based + memory types as ratified in the 20191213 version of the privileged + ISA specification. + + - const: zba + description: | + The standard Zba bit-manipulation extension for address generation + acceleration instructions as ratified at commit 6d33919 ("Merge pull + request #158 from hirooih/clmul-fix-loop-end-condition") of + riscv-bitmanip. + + - const: zbb + description: | + The standard Zbb bit-manipulation extension for basic bit-manipulation + as ratified at commit 6d33919 ("Merge pull request #158 from + hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + + - const: zbc + description: | + The standard Zbc bit-manipulation extension for carry-less + multiplication as ratified at commit 6d33919 ("Merge pull request + #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + + - const: zbs + description: | + The standard Zbs bit-manipulation extension for single-bit + instructions as ratified at commit 6d33919 ("Merge pull request #158 + from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + + - const: zicbom + description: + The standard Zicbom extension for base cache management operations as + ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs. + + - const: zicbop + description: + The standard Zicbop extension for cache-block prefetch instructions + as ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of + riscv-CMOs. + + - const: zicboz + description: + The standard Zicboz extension for cache-block zeroing as ratified + in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs. + + - const: zicntr + description: + The standard Zicntr extension for base counters and timers, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: zicsr + description: | + The standard Zicsr extension for control and status register + instructions, as ratified in the 20191213 version of the + unprivileged ISA specification. + + This does not include Chapter 10, "Counters", which documents + special case read-only CSRs, that were moved into the Zicntr and + Zihpm extensions after the ratification of the 20191213 version of + the unprivileged specification. + + - const: zifencei + description: + The standard Zifencei extension for instruction-fetch fence, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: zihintpause + description: + The standard Zihintpause extension for pause hints, as ratified in + commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual. + + - const: zihpm + description: + The standard Zihpm extension for hardware performance counters, as + ratified in the 20191213 version of the unprivileged ISA + specification. + + - const: ztso + description: + The standard Ztso extension for total store ordering, as ratified + in commit 2e5236 ("Ztso is now ratified.") of the + riscv-isa-manual. + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml new file mode 100644 index 000000000000..e62f6821372e --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/thead.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/thead.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD SoC-based boards + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +description: + T-HEAD SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A + items: + - enum: + - sipeed,lichee-pi-4a + - const: sipeed,lichee-module-4a + - const: thead,th1520 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt deleted file mode 100644 index 51f003006f04..000000000000 --- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt +++ /dev/null @@ -1,38 +0,0 @@ -Intersil ISL1209/19 I2C RTC/Alarm chip with event in - -ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the -ISL1208 and ISL1218 do not. They are all use the same driver with the bindings -described here, with chip specific properties as noted. - -Required properties supported by the device: - - "compatible": Should be one of the following: - - "isil,isl1208" - - "isil,isl1209" - - "isil,isl1218" - - "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - "interrupt-names": list which may contains "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "interrupts": list of interrupts for "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "isil,ev-evienb": Enable or disable internal pull on EVIN pin - Applies to isl1209 and isl1219 only - Possible values are 0 and 1 - Value 0 enables internal pull-up on evin pin, 1 disables it. - Default will leave the non-volatile configuration of the pullup - as is. - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin -connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml new file mode 100644 index 000000000000..11f7378d4997 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + - Trent Piepho <tpiepho@gmail.com> + +description: + ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the + ISL1208 and ISL1218 do not. + +properties: + compatible: + enum: + - isil,isl1208 + - isil,isl1209 + - isil,isl1218 + - isil,isl1219 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: irq + - const: evdet + + isil,ev-evienb: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + Enable or disable internal pull on EVIN pin + Default will leave the non-volatile configuration of the pullup + as is. + <0> : Enables internal pull-up on evin pin + <1> : Disables internal pull-up on evin pin + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + contains: + enum: + - isil,isl1209 + - isil,isl1219 + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: irq + - const: evdet + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: irq + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml new file mode 100644 index 000000000000..f89c1f660aee --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/loongson,rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson Real-Time Clock + +description: + The Loongson family chips use an on-chip counter 0 (Time Of Year + counter) as the RTC. + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls1b-rtc + - loongson,ls1c-rtc + - loongson,ls7a-rtc + - loongson,ls2k1000-rtc + - items: + - enum: + - loongson,ls2k2000-rtc + - loongson,ls2k0500-rtc + - const: loongson,ls7a-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rtc@1fe27800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0x1fe27800 0x100>; + + interrupt-parent = <&liointc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index c6fff5486fe6..efb66df82782 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -15,7 +15,7 @@ description: | properties: $nodename: - pattern: "^rtc(@.*|-[0-9a-f])*$" + pattern: "^rtc(@.*|-([0-9]|[1-9][0-9]+))?$" aux-voltage-chargeable: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index a3603e638c37..9af77f21bb7f 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -47,8 +47,6 @@ properties: - isil,isl1218 # Intersil ISL12022 Real-time Clock - isil,isl12022 - # Loongson-2K Socs/LS7A bridge Real-time Clock - - loongson,ls2x-rtc # Real Time Clock Module with I2C-Bus - microcrystal,rv3029 # Real Time Clock diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml index 7ed0230f6c67..d1f5eb996dba 100644 --- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -11,7 +11,7 @@ description: The RTC controller has separate IRQ lines for seconds and alarm. maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: rtc.yaml# diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index eb3488d8f9ee..6a7be42da523 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -70,6 +70,7 @@ properties: dsr-gpios: true rng-gpios: true dcd-gpios: true + rs485-rts-active-high: true rts-gpio: true power-domains: true clock-frequency: true diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index a8b323d7bf94..e35ad1109efc 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence UART Controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml new file mode 100644 index 000000000000..a76af0f6009b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART) + +maintainers: + - Min-Jen Chen <mjchen@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +allOf: + - $ref: serial.yaml + +properties: + compatible: + const: nuvoton,ma35d1-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + + serial@40700000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x40700000 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART0_GATE>; + }; +... diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml index 22513fb7c59a..3b8cae9d1016 100644 --- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml +++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml @@ -15,7 +15,7 @@ description: properties: $nodename: - pattern: "^slim(@.*|-[0-9a-f])*$" + pattern: "^slim(@.*|-([0-9]|[1-9][0-9]+))?$" "#address-cells": const: 2 diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml new file mode 100644 index 000000000000..1a952f569803 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 Cluster Dormant Control + +description: + The Cluster Dormant Control block keeps the CPU in idle state. A command + needs to be sent to this block to bring the CPU into running state. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm23550-cdc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cdc@3fe0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x3fe0e000 0x78>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml index 3fefd634bc69..a06ac2177444 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -33,6 +33,7 @@ properties: - mediatek,mt2701-pwrap - mediatek,mt6765-pwrap - mediatek,mt6779-pwrap + - mediatek,mt6795-pwrap - mediatek,mt6797-pwrap - mediatek,mt6873-pwrap - mediatek,mt7622-pwrap diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml index 94e72f25b331..23e7e4ea01ff 100644 --- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml +++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml# +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Global Control Registers block in Nuvoton SoCs diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 798f15588ee2..9dc8e48c8af4 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -26,6 +26,7 @@ properties: items: - enum: - qcom,qdu1000-aoss-qmp + - qcom,sa8775p-aoss-qmp - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml index 14dd29471c80..f2c5ec7e6437 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml @@ -55,9 +55,10 @@ additionalProperties: false examples: - | eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; + compatible = "qcom,sc7280-eud", "qcom,eud"; reg = <0x88e0000 0x2000>, <0x88e2000 0x1000>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -67,6 +68,7 @@ examples: remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml new file mode 100644 index 000000000000..031800985b5e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + The Qualcomm RPM (Resource Power Manager) architecture includes a concept + of "RPM Masters". They can be thought of as "the local gang leaders", usually + spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions + (particularly around entering hardware-driven low power modes: XO shutdown + and total system-wide power collapse) are first made at Master-level, and + only then aggregated for the entire system. + + The Master Stats provide a few useful bits that can be used to assess whether + our device has entered the desired low-power mode, how long it took to do so, + the duration of that residence, how long it took to come back online, + how many times a given sleep state was entered and which cores are actively + voting for staying awake. + + This scheme has been used on various SoCs in the 2013-2023 era, with some + newer or higher-end designs providing this information through an SMEM query. + +properties: + compatible: + const: qcom,rpm-master-stats + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to an RPM MSG RAM slice containing the master stats + minItems: 1 + maxItems: 5 + + qcom,master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + The name of the RPM Master which owns the MSG RAM slice where this + instance of Master Stats resides + minItems: 1 + maxItems: 5 + +required: + - compatible + - qcom,rpm-msg-ram + - qcom,master-names + +additionalProperties: false + +examples: + - | + stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&adsp_master_stats>, + <&cdsp_master_stats>, + <&tz_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "ADSP", + "CDSP", + "TZ"; + }; +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml index a4046ba60846..af632d0e0355 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -124,6 +124,7 @@ required: - qcom,tcs-offset - reg - reg-names + - power-domains additionalProperties: false @@ -179,6 +180,7 @@ examples: <SLEEP_TCS 1>, <WAKE_TCS 1>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; }; - | diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index ea86569a40d3..65c02a7fef80 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -81,6 +81,7 @@ if: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-msm8226 - qcom,rpm-msm8916 - qcom,rpm-msm8936 - qcom,rpm-msm8974 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml index 7ab8cfff18c1..96a7f1822022 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. (QTI) Stats maintainers: - - Maulik Shah <mkshah@codeaurora.org> + - Maulik Shah <quic_mkshah@quicinc.com> description: Always On Processor/Resource Power Manager maintains statistics of the SoC diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 65a2d5a4f28d..e4fa6a07b4fa 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3588-bigcore1-grf - rockchip,rk3588-ioc - rockchip,rk3588-php-grf + - rockchip,rk3588-pipe-phy-grf - rockchip,rk3588-sys-grf - rockchip,rk3588-pcie3-phy-grf - rockchip,rk3588-pcie3-pipe-grf @@ -52,6 +53,7 @@ properties: - rockchip,rk3399-pmugrf - rockchip,rk3568-grf - rockchip,rk3568-pmugrf + - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf - rockchip,rv1126-grf @@ -119,7 +121,7 @@ allOf: usbphy: type: object - $ref: "/schemas/phy/rockchip-usb-phy.yaml#" + $ref: /schemas/phy/rockchip-usb-phy.yaml# unevaluatedProperties: false @@ -134,14 +136,14 @@ allOf: gpio: type: object - $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#" + $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# unevaluatedProperties: false power-controller: type: object - $ref: "/schemas/power/rockchip,power-controller.yaml#" + $ref: /schemas/power/rockchip,power-controller.yaml# unevaluatedProperties: false @@ -156,7 +158,7 @@ allOf: mipi-dphy-rx0: type: object - $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#" + $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml# unevaluatedProperties: false @@ -184,7 +186,7 @@ allOf: reboot-mode: type: object - $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#" + $ref: /schemas/power/reset/syscon-reboot-mode.yaml# unevaluatedProperties: false @@ -199,6 +201,7 @@ allOf: - rockchip,rk3308-usb2phy-grf - rockchip,rk3328-usb2phy-grf - rockchip,rk3399-grf + - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf then: @@ -238,7 +241,7 @@ allOf: io-domains: type: object - $ref: "/schemas/power/rockchip-io-domain.yaml#" + $ref: /schemas/power/rockchip-io-domain.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index 5d8d9497f18e..e1d716df5dfa 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -17,6 +17,7 @@ select: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5260-pmu @@ -36,6 +37,7 @@ properties: - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5260-pmu @@ -50,6 +52,7 @@ properties: - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5420-pmu @@ -125,6 +128,7 @@ allOf: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5410-pmu @@ -143,6 +147,7 @@ allOf: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5420-pmu diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml new file mode 100644 index 000000000000..93ccd5905736 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98388.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98388 Speaker Amplifier + +maintainers: + - Ryan Lee <ryans.lee@analog.com> + +description: + The MAX98388 is a mono Class-D speaker amplifier with I/V feedback. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,max98388 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + adi,vmon-slot-no: + description: slot number of the voltage feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 1 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V feedback data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98388: amplifier@39 { + compatible = "adi,max98388"; + reg = <0x39>; + #sound-dai-cells = <0>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml new file mode 100644 index 000000000000..f3f32540779c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices SSM2518 audio amplifier + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: adi,ssm2518 + + reg: + maxItems: 1 + description: | + I2C address of the device. This will either be 0x34 (ADDR pin low) + or 0x35 (ADDR pin high) + + gpios: + maxItems: 1 + description: | + GPIO connected to the nSD pin. If the property is not present + it is assumed that the nSD pin is hardwired to always on. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + gpios = <&gpio 5 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml new file mode 100644 index 000000000000..144450df5869 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices SSM3515 Audio Amplifier + +maintainers: + - Martin PoviÅ¡er <povik+lin@cutebit.org> + +description: | + SSM3515 is a mono Class-D audio amplifier with digital input. + + https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,ssm3515 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@14 { + compatible = "adi,ssm3515"; + reg = <0x14>; + #sound-dai-cells = <0>; + sound-name-prefix = "Left Tweeter"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml index c87eb91de159..ed31e04ff6a6 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml @@ -24,7 +24,11 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array widgets: - description: User specified audio sound widgets. + description: | + User specified audio sound widgets. + Each entry is a pair of strings, the first being the type of + widget ("Microphone", "Line", "Headphone", "Speaker"), the + second being the machine specific name for the widget. $ref: /schemas/types.yaml#/definitions/non-unique-string-array convert-rate: $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 2ab74f995685..4c9acb8d4c4c 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -62,7 +62,7 @@ patternProperties: GPIO pin direction. Valid only when 'gpio-ctrl' is 1 0 = Output 1 = Input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 1 @@ -71,7 +71,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = Low 1 = High - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -80,7 +80,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = CMOS 1 = Open Drain - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -90,7 +90,7 @@ patternProperties: and 'gpio-dir' is 0 0 = Non-inverted, Active High 1 = Inverted, Active Low - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -114,7 +114,7 @@ patternProperties: 0 = High impedance input 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 2-7 = Reserved - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 default: 0 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 670b67ec0b61..f7bafbd4f1c2 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -44,6 +44,10 @@ properties: VAHP-supply: description: phandle to voltage regulator of headphone + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -69,6 +73,13 @@ examples: VA-supply = <®_audio>; VAHP-supply = <®_audio>; reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + + /* assume audio-graph */ + port { + cpu_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt deleted file mode 100644 index add1caf26ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ /dev/null @@ -1,112 +0,0 @@ -Dialog Semiconductor DA7219 Audio Codec bindings - -DA7219 is an audio codec with advanced accessory detect features. - -====== - -Required properties: -- compatible : Should be "dlg,da7219" -- reg: Specifies the I2C slave address - -- interrupts : IRQ line info for DA7219. - (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for - further information relating to interrupt properties) - -- VDD-supply: VDD power supply for the device -- VDDMIC-supply: VDDMIC power supply for the device -- VDDIO-supply: VDDIO power supply for the device - (See Documentation/devicetree/bindings/regulator/regulator.txt for further - information relating to regulators) - -Optional properties: -- interrupt-names : Name associated with interrupt line. Should be "wakeup" if - interrupt is to be used to wake system, otherwise "irq" should be used. -- wakeup-source: Flag to indicate this device can wake system (suspend/resume). - -- #clock-cells : Should be set to '<1>', two clock sources provided; -- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK); - -- clocks : phandle and clock specifier for codec MCLK. -- clock-names : Clock name string for 'clocks' attribute, should be "mclk". - -- dlg,micbias-lvl : Voltage (mV) for Mic Bias - [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>] -- dlg,mic-amp-in-sel : Mic input source type - ["diff", "se_p", "se_n"] - -Deprecated properties: -- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine - (LDO unavailable in production HW so property no longer required). - -====== - -Child node - 'da7219_aad': - -Optional properties: -- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). - [<2800>, <2900>] -- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) -- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) - [<2>, <5>, <10>, <50>, <100>, <200>, <500>] -- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) - [<200>, <500>, <750>, <1000>] -- dlg,jack-ins-deb : Debounce time for jack insertion (ms) - [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] -- dlg,jack-det-rate: Jack type detection latency (3/4 pole) - ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] -- dlg,jack-rem-deb : Debounce time for jack removal (ms) - [<1>, <5>, <10>, <20>] -- dlg,a-d-btn-thr : Impedance threshold between buttons A and D - [0x0 - 0xFF] -- dlg,d-b-btn-thr : Impedance threshold between buttons D and B - [0x0 - 0xFF] -- dlg,b-c-btn-thr : Impedance threshold between buttons B and C - [0x0 - 0xFF] -- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic - [0x0 - 0xFF] -- dlg,btn-avg : Number of 8-bit readings for averaged button measurement - [<1>, <2>, <4>, <8>] -- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement - [<1>, <2>, <4>, <8>] - -====== - -Example: - - codec: da7219@1a { - compatible = "dlg,da7219"; - reg = <0x1a>; - - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - - VDD-supply = <®_audio>; - VDDMIC-supply = <®_audio>; - VDDIO-supply = <®_audio>; - - #clock-cells = <1>; - clock-output-names = "dai-wclk", "dai-bclk"; - - clocks = <&clks 201>; - clock-names = "mclk"; - - dlg,ldo-lvl = <1200>; - dlg,micbias-lvl = <2600>; - dlg,mic-amp-in-sel = "diff"; - - da7219_aad { - dlg,btn-cfg = <50>; - dlg,mic-det-thr = <500>; - dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; - dlg,jack-rem-deb = <1>; - - dlg,a-d-btn-thr = <0xa>; - dlg,d-b-btn-thr = <0x16>; - dlg,b-c-btn-thr = <0x21>; - dlg,c-mic-btn-thr = <0x3E>; - - dlg,btn-avg = <4>; - dlg,adc-1bit-rpt = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml new file mode 100644 index 000000000000..bb5af48ab1e1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA7219 Audio Codec + +maintainers: + - David Rau <David.Rau.opensource@dm.renesas.com> + +description: + The DA7219 is an ultra low-power audio codec with + in-built advanced accessory detection (AAD) for mobile + computing and accessory applications, which supports + sample rates up to 96 kHz at 24-bit resolution. + +properties: + compatible: + const: dlg,da7219 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + VDD-supply: + description: + VDD power supply for the device. + + VDDMIC-supply: + description: + VDDMIC power supply for the device. + + VDDIO-supply: + description: + VDDIO power supply for the device. + + interrupt-names: + description: + Should be "wakeup" if interrupt is to be used to wake system, + otherwise "irq" should be used. + enum: + - wakeup + - irq + + wakeup-source: + type: boolean + description: + Flag to indicate this device can wake system (suspend/resume). + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: + Name given for DAI WCLK and BCLK outputs. + + clocks: + maxItems: 1 + description: + phandle and clock specifier for codec MCLK. + + clock-names: + const: mclk + + dlg,micbias-lvl: + enum: [1600, 1800, 2000, 2200, 2400, 2600] + description: + Voltage (mV) for Mic Bias. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-amp-in-sel: + enum: ["diff", "se_p", "se_n"] + description: + Mic input source type. + + diff - Differential. + + se_p - MIC_P. + Positive differential analog microphone input. + + se_n - MIC_N. + Negative differential analog microphone input. + $ref: /schemas/types.yaml#/definitions/string + + da7219_aad: + type: object + description: + Configuration of advanced accessory detection. + properties: + dlg,micbias-pulse-lvl: + enum: [2800, 2900] + description: + Mic bias higher voltage pulse level (mV). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,micbias-pulse-time: + description: + Mic bias higher voltage pulse duration (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + + dlg,btn-cfg: + enum: [2, 5, 10, 50, 100, 200, 500] + description: + Periodic button press measurements for 4-pole jack (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-det-thr: + enum: [200, 500, 750, 1000] + description: + Impedance threshold for mic detection measurement (Ohms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-ins-deb: + enum: [5, 10, 20, 50, 100, 200, 500, 1000] + description: + Debounce time for jack insertion (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-ins-det-pty: + enum: ["low", "high"] + description: + Polarity for jack insertion detection. + $ref: /schemas/types.yaml#/definitions/string + + dlg,jack-det-rate: + enum: ["32_64", "64_128", "128_256", "256_512"] + description: + Jack type (3/4 pole) detection latency (ms). + $ref: /schemas/types.yaml#/definitions/string + + dlg,jack-rem-deb: + enum: [1, 5, 10, 20] + description: + Debounce time for jack removal (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,a-d-btn-thr: + description: + Impedance threshold between buttons A and D. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,d-b-btn-thr: + description: + Impedance threshold between buttons D and B. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,b-c-btn-thr: + description: + Impedance threshold between buttons B and C. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,c-mic-btn-thr: + description: + Impedance threshold between button C and Mic. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,btn-avg: + enum: [1, 2, 4, 8] + description: + Number of 8-bit readings for averaged button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,adc-1bit-rpt: + enum: [1, 2, 4, 8] + description: + Repeat count for 1-bit button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupts + - VDD-supply + - VDDMIC-supply + - VDDIO-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + VDD-supply = <&vdd_reg>; + VDDMIC-supply = <&vddmic_reg>; + VDDIO-supply = <&vddio_reg>; + + #clock-cells = <1>; + clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk"; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + + da7219_aad { + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-ins-det-pty = "low"; + dlg,jack-det-rate = "32_64"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + + dlg,btn-avg = <4>; + dlg,adc-1bit-rpt = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 8b4f4015cfe4..4e8dbc5abfd1 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -46,6 +46,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-wm8958" + "fsl,imx-audio-nau8822" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml new file mode 100644 index 000000000000..5329dc140b1c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,chv3-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chameleon v3 audio codec + +maintainers: + - PaweÅ‚ Anikiel <pan@semihalf.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: google,chv3-codec + + "#sound-dai-cells": + const: 0 + +required: + - compatible + +additionalProperties: false + +examples: + - | + audio-codec { + compatible = "google,chv3-codec"; + }; diff --git a/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml new file mode 100644 index 000000000000..3ce910f44d39 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,chv3-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chameleon v3 I2S device + +maintainers: + - PaweÅ‚ Anikiel <pan@semihalf.com> + +description: | + I2S device for the Google Chameleon v3. The device handles both RX + and TX using a producer/consumer ring buffer design. + +properties: + compatible: + const: google,chv3-i2s + + reg: + items: + - description: core registers + - description: irq registers + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@c0060300 { + compatible = "google,chv3-i2s"; + reg = <0xc0060300 0x100>, + <0xc0060f00 0x10>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 67ccddd44489..666a95ac22c8 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -74,7 +74,8 @@ patternProperties: properties: sound-dai: - maxItems: 1 + minItems: 1 + maxItems: 4 required: - link-name diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml index c59a7cd9eaa9..d15c000f14e1 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -23,6 +23,7 @@ properties: - ingenic,jz4760-i2s - ingenic,jz4770-i2s - ingenic,jz4780-i2s + - ingenic,x1000-i2s - items: - const: ingenic,jz4725b-i2s - const: ingenic,jz4740-i2s diff --git a/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml new file mode 100644 index 000000000000..61e8babed402 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/loongson,ls-audio-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson 7axxx/2kxxx ASoC audio sound card driver + +maintainers: + - Yingkun Meng <mengyingkun@loongson.cn> + +description: + The binding describes the sound card present in loongson + 7axxx/2kxxx platform. The sound card is an ASoC component + which uses Loongson I2S controller to transfer the audio data. + +properties: + compatible: + const: loongson,ls-audio-card + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + mclk-fs: + $ref: simple-card.yaml#/definitions/mclk-fs + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + additionalProperties: false + properties: + sound-dai: + maxItems: 1 + required: + - sound-dai + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + maxItems: 1 + required: + - sound-dai + +required: + - compatible + - model + - mclk-fs + - cpu + - codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "loongson,ls-audio-card"; + model = "loongson-audio"; + mclk-fs = <512>; + + cpu { + sound-dai = <&i2s>; + }; + codec { + sound-dai = <&es8323>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index 82ccb32f08f2..e6cb711ece77 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -29,6 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the mediatek infracfg controller + power-domains: maxItems: 1 @@ -52,6 +56,11 @@ properties: - description: mux for i2si1_mck - description: mux for i2si2_mck - description: audio 26m clock + - description: audio pll1 divide 4 + - description: audio pll2 divide 4 + - description: clock divider for iec + - description: mux for a2sys clock + - description: mux for aud_iec clock-names: items: @@ -63,16 +72,21 @@ properties: - const: apll12_div2 - const: apll12_div3 - const: apll12_div9 - - const: a1sys_hp_sel - - const: aud_intbus_sel - - const: audio_h_sel - - const: audio_local_bus_sel - - const: dptx_m_sel - - const: i2so1_m_sel - - const: i2so2_m_sel - - const: i2si1_m_sel - - const: i2si2_m_sel + - const: top_a1sys_hp + - const: top_aud_intbus + - const: top_audio_h + - const: top_audio_local_bus + - const: top_dptx + - const: top_i2so1 + - const: top_i2so2 + - const: top_i2si1 + - const: top_i2si2 - const: adsp_audio_26m + - const: apll1_d4 + - const: apll2_d4 + - const: apll12_div4 + - const: top_a2sys + - const: top_aud_iec mediatek,etdm-in1-cowork-source: $ref: /schemas/types.yaml#/definitions/uint32 @@ -144,6 +158,7 @@ required: - resets - reset-names - mediatek,topckgen + - mediatek,infracfg - power-domains - clocks - clock-names @@ -162,6 +177,7 @@ examples: resets = <&watchdog 14>; reset-names = "audiosys"; mediatek,topckgen = <&topckgen>; + mediatek,infracfg = <&infracfg_ao>; power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO mediatek,etdm-in2-cowork-source = <2>; mediatek,etdm-out2-cowork-source = <0>; @@ -184,7 +200,12 @@ examples: <&topckgen 78>, //CLK_TOP_I2SO2 <&topckgen 79>, //CLK_TOP_I2SI1 <&topckgen 80>, //CLK_TOP_I2SI2 - <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M + <&adsp_audio26m 0>, //CLK_AUDIODSP_AUDIO26M + <&topckgen 132>, //CLK_TOP_APLL1_D4 + <&topckgen 133>, //CLK_TOP_APLL2_D4 + <&topckgen 183>, //CLK_TOP_APLL12_CK_DIV4 + <&topckgen 84>, //CLK_TOP_A2SYS + <&topckgen 82>; //CLK_TOP_AUD_IEC>; clock-names = "clk26m", "apll1", "apll2", @@ -193,16 +214,21 @@ examples: "apll12_div2", "apll12_div3", "apll12_div9", - "a1sys_hp_sel", - "aud_intbus_sel", - "audio_h_sel", - "audio_local_bus_sel", - "dptx_m_sel", - "i2so1_m_sel", - "i2so2_m_sel", - "i2si1_m_sel", - "i2si2_m_sel", - "adsp_audio_26m"; + "top_a1sys_hp", + "top_aud_intbus", + "top_audio_h", + "top_audio_local_bus", + "top_dptx", + "top_i2so1", + "top_i2so2", + "top_i2si1", + "top_i2si2", + "adsp_audio_26m", + "apll1_d4", + "apll2_d4", + "apll12_div4", + "top_a2sys", + "top_aud_iec"; }; ... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml index 6640272b3f4f..05e532b5d50a 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: mediatek,mt8188-mt6359-evb + enum: + - mediatek,mt8188-mt6359-evb + - mediatek,mt8188-nau8825 model: $ref: /schemas/types.yaml#/definitions/string @@ -42,7 +44,6 @@ patternProperties: we are going to update parameters in this node. items: enum: - - ADDA_BE - DPTX_BE - ETDM1_IN_BE - ETDM2_IN_BE @@ -62,11 +63,28 @@ patternProperties: required: - sound-dai + dai-format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + items: + enum: + - cpu + - codec + additionalProperties: false required: - link-name - - codec additionalProperties: false @@ -87,7 +105,8 @@ examples: "AIN1", "Headset Mic"; dai-link-0 { link-name = "ETDM3_OUT_BE"; - + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; codec { sound-dai = <&hdmi0>; }; diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml index 9b40268537cb..9aa65c975c4e 100644 --- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml @@ -56,13 +56,9 @@ properties: items: items: - description: value for DS line + enum: [0, 1] - description: value for sampling edge - anyOf: - - enum: - - [0, 0] - - [0, 1] - - [1, 0] - - [1, 1] + enum: [0, 1] minItems: 1 maxItems: 4 uniqueItems: true diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt deleted file mode 100644 index 1cd94517d45e..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8315.txt +++ /dev/null @@ -1,24 +0,0 @@ -Nuvoton NAU8315 Mono Class-D Amplifier - -Required properties: -- compatible : "nuvoton,nau8315" - "nuvoton,nau8318" - -Optional properties: -- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin. - If this option is not specified then driver does not manage - the pin state (e.g. chip is always on). - -Example: - -#include <dt-bindings/gpio/gpio.h> - -nau8315 { - compatible = "nuvoton,nau8315"; - enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -}; - -nau8318 { - compatible = "nuvoton,nau8318"; - enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt deleted file mode 100644 index 307a76528320..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8540.txt +++ /dev/null @@ -1,16 +0,0 @@ -NAU85L40 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "nuvoton,nau8540" - - - reg : the I2C address of the device. - -Example: - -codec: nau8540@1c { - compatible = "nuvoton,nau8540"; - reg = <0x1c>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt deleted file mode 100644 index 7deaa452b200..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8810.txt +++ /dev/null @@ -1,17 +0,0 @@ -NAU8810/NAU8812/NAU8814 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or - "nuvoton,nau8814" - - - reg : the I2C address of the device. - -Example: - -codec: nau8810@1a { - compatible = "nuvoton,nau8810"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8824.txt b/Documentation/devicetree/bindings/sound/nau8824.txt deleted file mode 100644 index e0058b97e49a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8824.txt +++ /dev/null @@ -1,88 +0,0 @@ -Nuvoton NAU8824 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8824" - - - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). - -Optional properties: - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-threshold-num: Number of buttons supported - - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as - SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) - where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. - Refer datasheet section 10.2 for more information about threshold calculation. - - - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. - - - nuvoton,sar-voltage: Reference voltage for button impedance measurement. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-compare-time: SAR compare time - 0 - 500 ns - 1 - 1 us - 2 - 2 us - 3 - 4 us - - - nuvoton,sar-sampling-time: SAR sampling time - 0 - 2 us - 1 - 4 us - 2 - 8 us - 3 - 16 us - - - nuvoton,short-key-debounce: Button short key press debounce time. - 0 - 30 ms - 1 - 50 ms - 2 - 100 ms - - - nuvoton,jack-eject-debounce: Jack ejection debounce time. - 0 - 0 ms - 1 - 1 ms - 2 - 10 ms - - -Example: - - headset: nau8824@1a { - compatible = "nuvoton,nau8824"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - // Setup 4 buttons impedance according to Android specification - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; - nuvoton,sar-hysteresis = <0>; - nuvoton,sar-voltage = <6>; - nuvoton,sar-compare-time = <1>; - nuvoton,sar-sampling-time = <1>; - nuvoton,short-key-debounce = <0>; - nuvoton,jack-eject-debounce = <1>; - }; diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt deleted file mode 100644 index a9c34526f4cb..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ /dev/null @@ -1,111 +0,0 @@ -Nuvoton NAU8825 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8825" - - - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-threshold-num: Number of buttons supported - - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as - SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) - where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. - Refer datasheet section 10.2 for more information about threshold calculation. - - - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. - - - nuvoton,sar-voltage: Reference voltage for button impedance measurement. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-compare-time: SAR compare time - 0 - 500 ns - 1 - 1 us - 2 - 2 us - 3 - 4 us - - - nuvoton,sar-sampling-time: SAR sampling time - 0 - 2 us - 1 - 4 us - 2 - 8 us - 3 - 16 us - - - nuvoton,short-key-debounce: Button short key press debounce time. - 0 - 30 ms - 1 - 50 ms - 2 - 100 ms - 3 - 30 ms - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,crosstalk-enable: make crosstalk function enable if set. - - - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set. - Otherwise, the drive keeps normal strength. - - - nuvoton,adc-delay-ms: Delay (in ms) to make input path stable and avoid pop noise. The - default value is 125 and range between 125 to 500 ms. - - - clocks: list of phandle and clock specifier pairs according to common clock bindings for the - clocks described in clock-names - - clock-names: should include "mclk" for the MCLK master clock - -Example: - - headset: nau8825@1a { - compatible = "nuvoton,nau8825"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - // Setup 4 buttons impedance according to Android specification - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; - nuvoton,sar-hysteresis = <1>; - nuvoton,sar-voltage = <0>; - nuvoton,sar-compare-time = <0>; - nuvoton,sar-sampling-time = <0>; - nuvoton,short-key-debounce = <2>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,crosstalk-enable; - - clock-names = "mclk"; - clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml new file mode 100644 index 000000000000..24006e9dc501 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8315.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8315/NAU8318 Mono Class-D Amplifier + +maintainers: + - David Lin <CTLIN0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8315 + - nuvoton,nau8318 + + '#sound-dai-cells': + const: 0 + + enable-gpios: + maxItems: 1 + description: + GPIO specifier for the chip's device enable input(EN) pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + codec { + compatible = "nuvoton,nau8315"; + #sound-dai-cells = <0>; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml new file mode 100644 index 000000000000..7ccfbb8d8b04 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton Technology Corporation NAU85L40 Audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8540 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1c { + compatible = "nuvoton,nau8540"; + reg = <0x1c>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml new file mode 100644 index 000000000000..d9696f6c75ed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8810/NAU8812/NAU8814 audio CODEC + +maintainers: + - David Lin <CTLIN0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8810 + - nuvoton,nau8812 + - nuvoton,nau8814 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8810"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml new file mode 100644 index 000000000000..3dbf438c3841 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8824 audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8824 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-polarity: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + JKDET pin polarity. + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF Impedance selection. + enum: + - 0 # Open + - 1 # 25 kOhm + - 2 # 125 kOhm + - 3 # 2.5 kOhm + default: 2 + + nuvoton,micbias-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Micbias voltage level. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-threshold-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of buttons supported. + minimum: 1 + maximum: 8 + default: 4 + + nuvoton,sar-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Impedance threshold for each button. Array that contains up to 8 buttons + configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is + configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by + 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold + calculation. + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 255 + + nuvoton,sar-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button impedance measurement hysteresis. + default: 0 + + nuvoton,sar-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Reference voltage for button impedance measurement. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-compare-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR compare time. + enum: + - 0 # 500ns + - 1 # 1us + - 2 # 2us + - 3 # 4us + default: 1 + + nuvoton,sar-sampling-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR sampling time. + enum: + - 0 # 2us + - 1 # 4us + - 2 # 8us + - 3 # 16us + default: 1 + + nuvoton,short-key-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button short key press debounce time. + enum: + - 0 # 30 ms + - 1 # 50 ms + - 2 # 100 ms + default: 0 + + nuvoton,jack-eject-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Jack ejection debounce time. + enum: + - 0 # 0 ms + - 1 # 1 ms + - 2 # 10 ms + default: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8824"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,sar-threshold-num = <4>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <0>; + nuvoton,sar-voltage = <6>; + nuvoton,sar-compare-time = <1>; + nuvoton,sar-sampling-time = <1>; + nuvoton,short-key-debounce = <0>; + nuvoton,jack-eject-debounce = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml new file mode 100644 index 000000000000..a54f194a0b49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml @@ -0,0 +1,239 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8825 audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8825 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: + Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: + Enable JKDET pin pull. + If set - pin pull enabled, otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: + Pull-up JKDET pin. + If set then JKDET pin is pull up, otherwise pull down. + type: boolean + + nuvoton,jkdet-polarity: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + JKDET pin polarity. + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF Impedance selection. + enum: + - 0 # Open + - 1 # 25 kOhm + - 2 # 125 kOhm + - 3 # 2.5 kOhm + default: 2 + + nuvoton,micbias-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Micbias voltage level. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-threshold-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of buttons supported. + minimum: 1 + maximum: 4 + default: 4 + + nuvoton,sar-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Impedance threshold for each button. Array that contains up to 8 buttons + configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is + configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by + 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold + calculation. + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 255 + + nuvoton,sar-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button impedance measurement hysteresis. + default: 0 + + nuvoton,sar-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Reference voltage for button impedance measurement. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-compare-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR compare time. + enum: + - 0 # 500 ns + - 1 # 1 us + - 2 # 2 us + - 3 # 4 us + default: 1 + + nuvoton,sar-sampling-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR sampling time. + enum: + - 0 # 2 us + - 1 # 4 us + - 2 # 8 us + - 3 # 16 us + default: 1 + + nuvoton,short-key-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button short key press debounce time. + enum: + - 0 # 30 ms + - 1 # 50 ms + - 2 # 100 ms + - 3 # 30 ms + default: 3 + + nuvoton,jack-insert-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number from 0 to 7 that sets debounce time to 2^(n+2) ms. + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number from 0 to 7 that sets debounce time to 2^(n+2) ms + maximum: 7 + default: 0 + + nuvoton,crosstalk-enable: + description: + make crosstalk function enable if set. + type: boolean + + nuvoton,adcout-drive-strong: + description: + make the drive strength of ADCOUT IO PIN strong if set. + Otherwise, the drive keeps normal strength. + type: boolean + + nuvoton,adc-delay-ms: + description: + Delay (in ms) to make input path stable and avoid pop noise. + The default value is 125 and range between 125 to 500 ms. + minimum: 125 + maximum: 500 + default: 125 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <1>; + nuvoton,sar-voltage = <0>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + nuvoton,crosstalk-enable; + + clock-names = "mclk"; + clocks = <&tegra_pmc 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml index 7c1e9895ce85..2588589ad62d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Common properties for NVIDIA Tegra audio complexes diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index cdbb4096fa44..9e5b30d9c6e6 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Process Manager Digital Audio Interfaces diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml index 1168410f6fbd..3552c44137ed 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS Clock Controller diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index 044e77718a1b..08c618e7e428 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml new file mode 100644 index 000000000000..e6723c9e312a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using + SoundWire digital audio interface. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: sdw20217020400 + + reg: + maxItems: 1 + + powerdown-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + vdd-1p8-supply: true + vdd-io-supply: true + +required: + - compatible + - reg + - powerdown-gpios + - '#sound-dai-cells' + - vdd-1p8-supply + - vdd-io-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + soundwire-controller { + #address-cells = <2>; + #size-cells = <0>; + + speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml new file mode 100644 index 000000000000..5287e9c9197e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt1016.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reaktek RT1016 Stereo Class D Audio Amplifier + +maintainers: + - oder_chiou@realtek.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: realtek,rt1016 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "realtek,rt1016"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt deleted file mode 100644 index 2310f8ff259b..000000000000 --- a/Documentation/devicetree/bindings/sound/rt1016.txt +++ /dev/null @@ -1,17 +0,0 @@ -RT1016 Stereo Class D Audio Amplifier - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt1016". - -- reg : The I2C address of the device. - - -Example: - -rt1016: codec@1a { - compatible = "realtek,rt1016"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml index 56e623d4e168..a970fd264b21 100644 --- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml @@ -36,7 +36,8 @@ properties: const: i2sclk resets: - maxItems: 1 + items: + - description: Optional controller resets dmas: items: diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt deleted file mode 100644 index 59381a778c79..000000000000 --- a/Documentation/devicetree/bindings/sound/ssm2518.txt +++ /dev/null @@ -1,20 +0,0 @@ -SSM2518 audio amplifier - -This device supports I2C only. - -Required properties: - - compatible : Must be "adi,ssm2518" - - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low) - or 0x35 (ADDR pin high) - -Optional properties: - - gpios : GPIO connected to the nSD pin. If the property is not present it is - assumed that the nSD pin is hardwired to always on. - -Example: - - ssm2518: ssm2518@34 { - compatible = "adi,ssm2518"; - reg = <0x34>; - gpios = <&gpio 5 0>; - }; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index a040d4d31412..b9111d375b93 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -61,6 +61,10 @@ properties: description: Configure the I2S device as MCLK clock provider. const: 0 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - "#sound-dai-cells" @@ -89,6 +93,13 @@ examples: dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_pins_a>; + + /* assume audio-graph */ + port { + codec_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml new file mode 100644 index 000000000000..abb373fbfa26 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/starfive,jh7110-tdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 TDM Controller + +description: | + The TDM Controller is a Time Division Multiplexed audio interface + integrated in StarFive JH7110 SoC, allowing up to 8 channels of + audio over a serial interface. The TDM controller can operate both + in master and slave mode. + +maintainers: + - Walker Chen <walker.chen@starfivetech.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - starfive,jh7110-tdm + + reg: + maxItems: 1 + + clocks: + items: + - description: TDM AHB Clock + - description: TDM APB Clock + - description: TDM Internal Clock + - description: TDM Clock + - description: Inner MCLK + - description: TDM External Clock + + clock-names: + items: + - const: tdm_ahb + - const: tdm_apb + - const: tdm_internal + - const: tdm + - const: mclk_inner + - const: tdm_ext + + resets: + items: + - description: tdm ahb reset line + - description: tdm apb reset line + - description: tdm core reset line + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + tdm@10090000 { + compatible = "starfive,jh7110-tdm"; + reg = <0x10090000 0x1000>; + clocks = <&syscrg 184>, + <&syscrg 185>, + <&syscrg 186>, + <&syscrg 187>, + <&syscrg 17>, + <&tdm_ext>; + clock-names = "tdm_ahb", "tdm_apb", + "tdm_internal", "tdm", + "mclk_inner", "tdm_ext"; + resets = <&syscrg 105>, + <&syscrg 107>, + <&syscrg 106>; + dmas = <&dma 20>, <&dma 21>; + dma-names = "rx","tx"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..f01c0dde0cf7 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2562.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA @@ -55,7 +55,9 @@ properties: description: TDM TX current sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -72,7 +74,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..be2536e8c440 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA @@ -57,7 +57,9 @@ properties: - 1 # Falling edge '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -74,7 +76,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..f2d878f6f495 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA @@ -50,7 +50,9 @@ properties: description: TDM TX voltage sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..8d60e4e236d6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding@ti.com> + +description: + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. An integrated on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + description: + I2C address, in multiple tas2781s case, all the i2c address + aggreate as one Audio Device to support multiple audio slots. + maxItems: 8 + minItems: 1 + items: + minimum: 0x38 + maximum: 0x3f + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad tas2781s, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad_tas2781: tas2781@38 { + compatible = "ti,tas2781"; + reg = <0x38>, /* Audio slot 0 */ + <0x3a>, /* Audio slot 1 */ + <0x39>, /* Audio slot 2 */ + <0x3b>; /* Audio slot 3 */ + + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml new file mode 100644 index 000000000000..a7cc9aa34468 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic32x4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC32x4 Stereo Audio codec + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + +description: | + The TLV320AIC32x4 audio codec can be accessed using I2C or SPI + +properties: + compatible: + enum: + - ti,tas2505 + - ti,tlv320aic32x4 + - ti,tlv320aic32x6 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master clock + + clock-names: + items: + - const: mclk + + av-supply: + description: Analog core power supply + + dv-supply: + description: Digital core power supply + + iov-supply: + description: Digital IO power supply + + ldoin-supply: + description: LDO power supply + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + aic32x4-gpio-func: + description: | + GPIO function configuration for pins MFP1-MFP5. + Types are defined in include/sound/tlv320aic32x4.h + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + +required: + - compatible + - reg + - clocks + - clock-names + - iov-supply + +allOf: + - $ref: dai-common.yaml# + - if: + not: + required: + - ldoin-supply + then: + required: + - av-supply + - dv-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + iov-supply = <®_3v3>; + ldoin-supply = <®_3v3>; + clocks = <&clks 201>; + clock-names = "mclk"; + aic32x4-gpio-func= < + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml index e8ca9f3369f8..206f6d61e362 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -61,6 +61,7 @@ properties: GPIO specification for the active low RESET input. gpio-reset: + $ref: /schemas/types.yaml#/definitions/uint32-matrix maxItems: 1 description: Deprecated, please use reset-gpios instead. diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt deleted file mode 100644 index f59125bc79d1..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ /dev/null @@ -1,42 +0,0 @@ -Texas Instruments - tlv320aic32x4 Codec module - -The tlv320aic32x4 serial control bus communicates through I2C protocols - -Required properties: - - compatible - "string" - One of: - "ti,tlv320aic32x4" TLV320AIC3204 - "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 - "ti,tas2505" TAS2505, TAS2521 - - reg: I2C slave address - - supply-*: Required supply regulators are: - "iov" - digital IO power supply - "ldoin" - LDO power supply - "dv" - Digital core power supply - "av" - Analog core power supply - If you supply ldoin, dv and av are optional. Otherwise they are required - See regulator/regulator.txt for more information about the detailed binding - format. - -Optional properties: - - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt - - clocks/clock-names: Clock named 'mclk' for the master clock of the codec. - See clock/clock-bindings.txt for information about the detailed format. - - aic32x4-gpio-func - <array of 5 int> - - Types are defined in include/sound/tlv320aic32x4.h - - -Example: - -codec: tlv320aic32x4@18 { - compatible = "ti,tlv320aic32x4"; - reg = <0x18>; - clocks = <&clks 201>; - clock-names = "mclk"; - aic32x4-gpio-func= < - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ - >; -}; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml index 7105ed5fd6c7..4cfa66f62681 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8903 audio codec diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index e4dba825ab11..fb44b89a754e 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -21,6 +21,7 @@ properties: - qcom,soundwire-v1.5.1 - qcom,soundwire-v1.6.0 - qcom,soundwire-v1.7.0 + - qcom,soundwire-v2.0.0 reg: maxItems: 1 @@ -80,18 +81,29 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Sample interval low of each data port. + Sample interval (only lowest byte) of each data port. Out ports followed by In ports. Used for Sample Interval calculation. Value of 0xff indicates that this option is not implemented or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 + + qcom,ports-sinterval: + $ref: /schemas/types.yaml#/definitions/uint16-array + description: + Sample interval of each data port. + Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xffff indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 16 qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -102,7 +114,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-offset2: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -113,7 +125,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-lane-control: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -124,7 +136,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-block-pack-mode: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -137,7 +149,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -154,7 +166,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -171,7 +183,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -187,7 +199,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -219,10 +231,15 @@ required: - '#size-cells' - qcom,dout-ports - qcom,din-ports - - qcom,ports-sinterval-low - qcom,ports-offset1 - qcom,ports-offset2 +oneOf: + - required: + - qcom,ports-sinterval-low + - required: + - qcom,ports-sinterval + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index 2155478bfc4d..a6f34bdd1d3c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -14,9 +14,6 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: const: allwinner,sun4i-a10-spi @@ -46,12 +43,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -71,7 +65,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index de36c6a34a0f..28b8ace63044 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -14,11 +14,9 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: oneOf: + - const: allwinner,sun50i-r329-spi - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: @@ -28,6 +26,15 @@ properties: - allwinner,sun50i-h616-spi - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi + - items: + - enum: + - allwinner,sun20i-d1-spi + - allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi + - items: + - const: allwinner,sun20i-d1-spi-dbi + - const: allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi reg: maxItems: 1 @@ -58,12 +65,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -83,7 +87,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 6c57dd6c3a36..58367587bfbc 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -20,6 +20,10 @@ properties: - items: - const: microchip,sam9x60-spi - const: atmel,at91rm9200-spi + - items: + - const: microchip,sam9x7-spi + - const: microchip,sam9x60-spi + - const: atmel,at91rm9200-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index b310069762dd..4f15f9a0cc34 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -46,12 +46,28 @@ allOf: maxItems: 2 items: enum: [ qspi, qspi-ocp ] + - if: + properties: + compatible: + contains: + const: amd,pensando-elba-qspi + then: + properties: + cdns,fifo-depth: + enum: [ 128, 256, 1024 ] + default: 1024 + else: + properties: + cdns,fifo-depth: + enum: [ 128, 256 ] + default: 128 properties: compatible: oneOf: - items: - enum: + - amd,pensando-elba-qspi - ti,k2g-qspi - ti,am654-ospi - intel,lgm-qspi @@ -76,8 +92,6 @@ properties: description: Size of the data FIFO in words. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 128, 256 ] - default: 128 cdns,fifo-width: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index ee8f7ea907b0..1696ac46a660 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -29,6 +29,9 @@ properties: reg: maxItems: 1 + iommus: + maxItems: 1 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml new file mode 100644 index 000000000000..e59183e53690 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M Clocked Serial Interface (CSI) + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: renesas,rzv2m-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The clock used to generate the output clock (CSICLK) + - description: Internal clock to access the registers (PCLK) + + clock-names: + items: + - const: csiclk + - const: pclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - power-domains + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a09g011-cpg.h> + csi4: spi@a4020200 { + compatible = "renesas,rzv2m-csi"; + reg = <0xa4020200 0x80>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>, + <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>; + clock-names = "csiclk", "pclk"; + resets = <&cpg R9A09G011_CSI_GPH_PRESETN>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index e0a465d70b0a..79da99ca0e53 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -35,8 +35,6 @@ properties: minItems: 2 maxItems: 3 - cs-gpios: true - dmas: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 12ca108864c6..a47cb144b09f 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -74,6 +74,8 @@ properties: const: intel,keembay-ssi - description: Intel Thunder Bay SPI Controller const: intel,thunderbay-ssi + - description: Intel Mount Evans Integrated Management Complex SPI Controller + const: intel,mountevans-imc-ssi - description: AMD Pensando Elba SoC SPI Controller const: amd,pensando-elba-spi - description: Baikal-T1 SPI Controller diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml index 597fc4e6b01c..c96131ebbea1 100644 --- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml +++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml @@ -17,9 +17,6 @@ allOf: - $ref: spi-controller.yaml# properties: - "#address-cells": true - "#size-cells": true - compatible: const: socionext,uniphier-scssi diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index b0f83b5c2cdd..b7552739b554 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence SPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 90945f59b7e8..524f6fe8c27b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^spi(@.*|-[0-9a-f])*$" + pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$" "#address-cells": enum: [0, 1] diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml index 6bd83836eded..4beb3af0416d 100644 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx SPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index 20f77246d365..e5199b109dad 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# @@ -32,6 +32,12 @@ properties: clocks: maxItems: 2 + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml index 83e8fb4a548d..7ea8fb42ce2c 100644 --- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml @@ -14,7 +14,7 @@ allOf: - $ref: spi-controller.yaml# maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> # Everything else is described in the common file properties: diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml index abcbbe13723f..ac99883a3f29 100644 --- a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml +++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml @@ -14,13 +14,18 @@ description: |+ for multiple SoCs to control a single SPMI master. allOf: - - $ref: "spmi.yaml" + - $ref: spmi.yaml properties: compatible: - enum: - - mediatek,mt6873-spmi - - mediatek,mt8195-spmi + oneOf: + - enum: + - mediatek,mt6873-spmi + - mediatek,mt8195-spmi + - items: + - enum: + - mediatek,mt8186-spmi + - const: mediatek,mt8195-spmi reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index 0548e8e0d30b..8025a852bc9c 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -18,8 +18,10 @@ properties: items: - enum: - qcom,apq8064-imem + - qcom,msm8226-imem - qcom,msm8974-imem - qcom,qcs404-imem + - qcom,qdu1000-imem - qcom,sc7180-imem - qcom,sc7280-imem - qcom,sdm630-imem diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 993430be355b..0922d1f71ba8 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -94,6 +94,7 @@ patternProperties: - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns - socionext,milbeaut-smp-sram + - stericsson,u8500-esram reg: description: diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index b0bee7e42038..ab8b8fccc7af 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -8,6 +8,7 @@ Required properties: * marvell,armada380-thermal * marvell,armadaxp-thermal * marvell,armada-ap806-thermal + * marvell,armada-ap807-thermal * marvell,armada-cp110-thermal Note: these bindings are deprecated for AP806/CP110 and should instead diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt deleted file mode 100644 index a3e9ec5dc7ac..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ /dev/null @@ -1,41 +0,0 @@ -Binding for Thermal Sensor driver for BCM2835 SoCs. - -Required parameters: -------------------- - -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. -#thermal-sensor-cells: should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) - -Example: - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <80000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - coefficients = <(-538) 407000>; - - cooling-maps { - }; - }; -}; - -thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml new file mode 100644 index 000000000000..2b6026d9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 thermal sensor + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-thermal + - brcm,bcm2836-thermal + - brcm,bcm2837-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - '#thermal-sensor-cells' + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d1ec963a6834..27e9e16e6455 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -29,6 +29,8 @@ properties: items: - enum: - qcom,mdm9607-tsens + - qcom,msm8226-tsens + - qcom,msm8909-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -48,6 +50,7 @@ properties: - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens + - qcom,qcm2290-tsens - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens @@ -56,6 +59,7 @@ properties: - qcom,sdm845-tsens - qcom,sm6115-tsens - qcom,sm6350-tsens + - qcom,sm6375-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens - qcom,sm8350-tsens @@ -67,6 +71,12 @@ properties: enum: - qcom,ipq8074-tsens + - description: v2 of TSENS with combined interrupt + items: + - enum: + - qcom,ipq9574-tsens + - const: qcom,ipq8074-tsens + reg: items: - description: TM registers @@ -223,12 +233,7 @@ allOf: contains: enum: - qcom,ipq8064-tsens - - qcom,mdm9607-tsens - - qcom,msm8916-tsens - qcom,msm8960-tsens - - qcom,msm8974-tsens - - qcom,msm8976-tsens - - qcom,qcs404-tsens - qcom,tsens-v0_1 - qcom,tsens-v1 then: @@ -244,22 +249,7 @@ allOf: properties: compatible: contains: - enum: - - qcom,msm8953-tsens - - qcom,msm8996-tsens - - qcom,msm8998-tsens - - qcom,sc7180-tsens - - qcom,sc7280-tsens - - qcom,sc8180x-tsens - - qcom,sc8280xp-tsens - - qcom,sdm630-tsens - - qcom,sdm845-tsens - - qcom,sm6350-tsens - - qcom,sm8150-tsens - - qcom,sm8250-tsens - - qcom,sm8350-tsens - - qcom,sm8450-tsens - - qcom,tsens-v2 + const: qcom,tsens-v2 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt deleted file mode 100644 index 39adf54b4388..000000000000 --- a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -Broadcom Kona Family timer ------------------------------------------------------ -This timer is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -Required properties: -- compatible : "brcm,kona-timer" -- DEPRECATED: compatible : "bcm,kona-timer" -- reg : Register range for the timer -- interrupts : interrupt for the timer -- clocks: phandle + clock specifier pair of the external clock -- clock-frequency: frequency that the clock operates - -Only one of clocks or clock-frequency should be specified. - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - timer@35006000 { - compatible = "brcm,kona-timer"; - reg = <0x35006000 0x1000>; - interrupts = <0x0 7 0x4>; - clocks = <&hub_timer_clk>; - }; - diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml new file mode 100644 index 000000000000..d6af8383d6fc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family timer + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,kona-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +oneOf: + - required: + - clocks + - required: + - clock-frequency + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm281xx.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@35006000 { + compatible = "brcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index bc5e6f226295..dbba780c9b02 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence TTC - Triple Timer Counter maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index 716c6afcca1f..dbe1267af06a 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -31,9 +31,13 @@ properties: - enum: - fsl,imx6sl-gpt - fsl,imx6sx-gpt + - fsl,imx8mp-gpt - fsl,imxrt1050-gpt - fsl,imxrt1170-gpt - const: fsl,imx6dl-gpt + - items: + - const: fsl,imx6ul-gpt + - const: fsl,imx6sx-gpt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml new file mode 100644 index 000000000000..ad61ae55850b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 PWM timer + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: + Loongson-1 PWM timer can be used for system clock source + and clock event timers. + +properties: + compatible: + const: loongson,ls1b-pwmtimer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + clocksource: timer@1fe5c030 { + compatible = "loongson,ls1b-pwmtimer"; + reg = <0x1fe5c030 0x10>; + + clocks = <&clkc LS1X_CLKID_APB>; + interrupt-parent = <&intc0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml new file mode 100644 index 000000000000..daa7832babe3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Timer present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,rt2880-timer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + timer@100 { + compatible = "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + clocks = <&sysc 3>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 94bef9424df1..a0185e15a42f 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -29,14 +29,15 @@ properties: oneOf: - items: - enum: - - sifive,fu540-c000-clint - - starfive,jh7100-clint - - starfive,jh7110-clint - - canaan,k210-clint - - const: sifive,clint0 + - canaan,k210-clint # Canaan Kendryte K210 + - sifive,fu540-c000-clint # SiFive FU540 + - starfive,jh7100-clint # StarFive JH7100 + - starfive,jh7110-clint # StarFive JH7110 + - const: sifive,clint0 # SiFive CLINT v0 IP block - items: - enum: - allwinner,sun20i-d1-clint + - thead,th1520-clint - const: thead,c900-clint - items: - const: sifive,clint0 @@ -45,14 +46,9 @@ properties: description: For the QEMU virt machine only description: - Should be "<vendor>,<chip>-clint" and "sifive,clint<version>". - Supported compatible strings are - - "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated - onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive - CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and - "sifive,clint0" for the SiFive CLINT v0 IP block with no chip - integration tweaks. - Please refer to sifive-blocks-ip-versioning.txt for details + Should be "<vendor>,<chip>-clint", followed by "sifive,clint<version>" + when compatible with a SiFive CLINT. Please refer to + sifive-blocks-ip-versioning.txt for details regarding the latter. reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml index fd6a7b51f571..95f42acd0c54 100644 --- a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml +++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml @@ -17,7 +17,7 @@ description: properties: $nodename: - pattern: "^timestamp(@.*|-[0-9a-f])?$" + pattern: "^timestamp(@.*|-([0-9]|[1-9][0-9]+))?$" "#timestamp-cells": description: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 246863a9bc7e..ba2bfb547909 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -139,6 +139,8 @@ properties: - infineon,ir38164 # Infineon IR38263 Voltage Regulator - infineon,ir38263 + # Infineon IRPS5401 Voltage Regulator (PMIC) + - infineon,irps5401 # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) - infineon,slb9635tt # Infineon SLB9645 I2C TPM (new protocol, max 400khz) diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index cae46c4982ad..69a93a0722f0 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b26d26c2b023..782402800d4a 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -45,7 +45,9 @@ properties: - fsl,vf610-usb - const: fsl,imx27-usb - items: - - const: fsl,imx8dxl-usb + - enum: + - fsl,imx8dxl-usb + - fsl,imx8ulp-usb - const: fsl,imx7ulp-usb - const: fsl,imx6ul-usb - items: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index d3506090f8b1..0a5c98ea711d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -53,6 +53,7 @@ properties: - amlogic,meson8b-usb - amlogic,meson-gxbb-usb - amlogic,meson-g12a-usb + - amlogic,meson-a1-usb - intel,socfpga-agilex-hsotg - const: snps,dwc2 - const: amcc,dwc-otg diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml index 098b73134a1b..bb373eb025a5 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx SuperSpeed DWC3 USB SoC controller maintainers: - - Manish Narani <manish.narani@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml new file mode 100644 index 000000000000..ceb76394af60 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8QM Soc USB Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx8qm-usb3 + + reg: + items: + - description: Register set for iMX USB3 Platform Control + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + items: + - description: Standby clock. Used during ultra low power states. + - description: USB bus clock for usb3 controller. + - description: AXI clock for AXI interface. + - description: ipg clock for register access. + - description: Core clock for usb3 controller. + + clock-names: + items: + - const: lpm + - const: bus + - const: aclk + - const: ipg + - const: core + + power-domains: + maxItems: 1 + +# Required child node: + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + reg = <0x5b110000 0x10000>; + ranges; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "lpm", "bus", "aclk", "ipg", "core"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + #address-cells = <1>; + #size-cells = <1>; + + usb@5b120000 { + compatible = "cdns,usb3"; + reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */ + <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>; /* memory area for DEVICE registers */ + reg-names = "otg", "xhci", "dev"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 9445764bd8de..b956bb5fada7 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -61,6 +61,7 @@ properties: - ibm,476gtr-ehci - nxp,lpc1850-ehci - qca,ar7100-ehci + - rockchip,rk3588-ehci - snps,hsdk-v1.0-ehci - socionext,uniphier-ehci - const: generic-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index d06d1e7d8876..be268e23ca79 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -44,6 +44,7 @@ properties: - hpe,gxp-ohci - ibm,476gtr-ohci - ingenic,jz4740-ohci + - rockchip,rk3588-ohci - snps,hsdk-v1.0-ohci - const: generic-ohci - enum: @@ -69,7 +70,7 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 4 description: | In case the Renesas R-Car Gen3 SoCs: - if a host only channel: first clock should be host. @@ -147,6 +148,20 @@ allOf: then: properties: transceiver: false + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-ohci + then: + properties: + clocks: + minItems: 4 + else: + properties: + clocks: + minItems: 1 + maxItems: 3 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index 478214ab045e..a59d91243ac8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -304,7 +304,7 @@ examples: # Dual role switch with type-c - | usb@11201000 { - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; reg-names = "mac", "ippc"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml new file mode 100644 index 000000000000..ff3a1707ef57 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB5744 4-port Hub Controller + +description: + Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), + low power, low pin count configurable and fully compliant with the USB 3.1 + Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed + (LS) USB signaling, offering complete coverage of all defined USB operating + speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 + controller, so 5 Gbps SuperSpeed data transfers are not affected by slower + USB 2.0 traffic. + +maintainers: + - Piyush Mehta <piyush.mehta@amd.com> + - Michal Simek <michal.simek@amd.com> + +properties: + compatible: + enum: + - usb424,2744 + - usb424,5744 + - microchip,usb5744 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO controlling the GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + + i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of an usb hub connected via i2c bus. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,usb5744 + then: + properties: + reset-gpios: false + vdd-supply: false + peer-hub: false + i2c-bus: false + else: + $ref: /schemas/usb/usb-device.yaml + required: + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c: i2c { + #address-cells = <1>; + #size-cells = <0>; + hub: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; + }; + + usb { + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index e2270ce0c56b..c6e661e8915c 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -91,6 +91,7 @@ properties: phys: minItems: 1 + maxItems: 2 description: Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. @@ -99,13 +100,7 @@ properties: minItems: 1 items: - const: usb2-0 - - const: usb2-1 - - const: usb2-2 - - const: usb2-3 - const: usb3-0 - - const: usb3-1 - - const: usb3-2 - - const: usb3-3 avddio-usb-supply: description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml new file mode 100644 index 000000000000..c0201da002f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - onnn,nb7vpq904m + + reg: + maxItems: 1 + + vcc-supply: + description: power supply (1.8V) + + enable-gpios: true + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical data lane indexes. Position determines how + lanes are connected to the redriver, It is assumed the same order + is kept on the other side of the redriver. + Lane number represents the following + - 0 is RX2 lane + - 1 is TX2 lane + - 2 is TX1 lane + - 3 is RX1 lane + The position determines the physical port of the redriver, in the + order A, B, C & D. + oneOf: + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + description: | + This is the lanes default layout + - Port A to RX2 lane + - Port B to TX2 lane + - Port C to TX1 lane + - Port D to RX1 lane + - items: + - const: 3 + - const: 2 + - const: 1 + - const: 0 + description: | + This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout + - Port A to RX1 lane + - Port B to TX1 lane + - Port C to TX2 lane + - Port D to RX2 lane + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@32 { + compatible = "onnn,nb7vpq904m"; + reg = <0x32>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + data-lanes = <3 2 1 0>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index d84281926f10..ae24dac78d9a 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -17,12 +17,14 @@ properties: - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 + - qcom,ipq9574-dwc3 - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs404-dwc3 + - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sc8280xp-dwc3 @@ -133,7 +135,6 @@ required: - "#address-cells" - "#size-cells" - ranges - - power-domains - clocks - clock-names - interrupts @@ -177,9 +178,11 @@ allOf: compatible: contains: enum: + - qcom,ipq9574-dwc3 - qcom,msm8953-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sdm670-dwc3 @@ -455,6 +458,25 @@ allOf: - const: dm_hs_phy_irq - const: ss_phy_irq + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + minItems: 3 + items: + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml new file mode 100644 index 000000000000..55df3129a0bc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC based USB Type-C block + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: + Qualcomm PMIC Type-C block + +properties: + compatible: + enum: + - qcom,pm8150b-typec + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + reg: + description: Type-C port and pdphy SPMI register base offsets + maxItems: 2 + + interrupts: + items: + - description: Type-C CC attach notification, VBUS error, tCCDebounce done + - description: Type-C VCONN powered + - description: Type-C CC state change + - description: Type-C VCONN over-current + - description: Type-C VBUS state change + - description: Type-C Attach/detach notification + - description: Type-C Legacy cable detect + - description: Type-C Try.Src Try.Snk state change + - description: Power Domain Signal TX - HardReset or CableReset signal TX + - description: Power Domain Signal RX - HardReset or CableReset signal RX + - description: Power Domain TX complete + - description: Power Domain RX complete + - description: Power Domain TX fail + - description: Power Domain TX message discard + - description: Power Domain RX message discard + - description: Power Domain Fast Role Swap event + + interrupt-names: + items: + - const: or-rid-detect-change + - const: vpd-detect + - const: cc-state-change + - const: vconn-oc + - const: vbus-change + - const: attach-detach + - const: legacy-cable-detect + - const: try-snk-src-detect + - const: sig-tx + - const: sig-rx + - const: msg-tx + - const: msg-rx + - const: msg-tx-failed + - const: msg-tx-discarded + - const: msg-rx-discarded + - const: fr-swap + + vdd-vbus-supply: + description: VBUS power supply. + + vdd-pdphy-supply: + description: VDD regulator supply to the PDPHY. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Contains a port which produces data-role switching messages. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - vdd-vbus-supply + - vdd-pdphy-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/usb/pd.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8150b_typec: typec@1500 { + compatible = "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + + vdd-vbus-supply = <&pm8150b_vbus>; + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmic_typec_mux_out: endpoint { + remote-endpoint = <&usb_phy_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + pmic_typec_role_switch_out: endpoint { + remote-endpoint = <&usb_role_switch_in>; + }; + }; + }; + }; + }; + }; + + usb { + dr_mode = "otg"; + usb-role-switch; + port { + usb_role_switch_in: endpoint { + remote-endpoint = <&pmic_typec_role_switch_out>; + }; + }; + }; + + usb-phy { + orientation-switch; + port { + usb_phy_typec_mux_in: endpoint { + remote-endpoint = <&pmic_typec_mux_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 50edc4da780e..a696f23730d3 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -44,15 +44,15 @@ properties: It's either a single common DWC3 interrupt (dwc_usb3) or individual interrupts for the host, gadget and DRD modes. minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 - maxItems: 3 + maxItems: 4 oneOf: - const: dwc_usb3 - items: - enum: [host, peripheral, otg] + enum: [host, peripheral, otg, wakeup] clocks: description: @@ -287,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml new file mode 100644 index 000000000000..24aa9c10d6ab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-usb + + ranges: true + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller stg_syscon node. + - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for USB. + + dr_mode: + enum: [host, otg, peripheral] + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + clocks: + items: + - description: link power management clock + - description: standby clock + - description: APB clock + - description: AXI clock + - description: UTMI APB clock + + clock-names: + items: + - const: lpm + - const: stb + - const: apb + - const: axi + - const: utmi_apb + + resets: + items: + - description: Power up reset + - description: APB clock reset + - description: AXI clock reset + - description: UTMI APB clock reset + + reset-names: + items: + - const: pwrup + - const: apb + - const: axi + - const: utmi_apb + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + description: Required child node + +required: + - compatible + - ranges + - starfive,stg-syscon + - '#address-cells' + - '#size-cells' + - dr_mode + - clocks + - resets + +additionalProperties: false + +examples: + - | + usb@10100000 { + compatible = "starfive,jh7110-usb"; + ranges = <0x0 0x10100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + starfive,stg-syscon = <&stg_syscon 0x4>; + clocks = <&syscrg 4>, + <&stgcrg 5>, + <&stgcrg 1>, + <&stgcrg 3>, + <&stgcrg 2>; + clock-names = "lpm", "stb", "apb", "axi", "utmi_apb"; + resets = <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 7>, + <&stgcrg 9>; + reset-names = "pwrup", "apb", "axi", "utmi_apb"; + dr_mode = "host"; + + usb@0 { + compatible = "cdns,usb3"; + reg = <0x0 0x10000>, + <0x10000 0x10000>, + <0x20000 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <100>, <108>, <110>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index d25fc708e32c..fec5651f5602 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -92,7 +92,7 @@ examples: usb@31100000 { compatible = "snps,dwc3"; - reg =<0x00 0x31100000 0x00 0x50000>; + reg = <0x00 0x31100000 0x00 0x50000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ interrupt-names = "host", "peripheral"; diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml index 4d1530816817..ac5b99710332 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.yaml +++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml @@ -231,7 +231,7 @@ properties: power-on sequence to a port until the port has adequate power. swap-dx-lanes: - $ref: /schemas/types.yaml#/definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Specifies the ports which will swap the differential-pair (D+/D-), default is not-swapped. diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml index 04c123c7252a..868dffe314bc 100644 --- a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml +++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx udc controller maintainers: - - Manish Narani <manish.narani@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 82d39ab0231b..af60bf1a6664 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -388,6 +388,8 @@ patternProperties: description: EDIMAX Technology Co., Ltd "^edt,.*": description: Emerging Display Technologies + "^ees,.*": + description: Emtop Embedded Solutions "^eeti,.*": description: eGalax_eMPIA Technology Inc "^einfochips,.*": @@ -617,6 +619,8 @@ patternProperties: description: Integrated Micro-Electronics Inc. "^incircuit,.*": description: In-Circuit GmbH + "^indiedroid,.*": + description: Indiedroid "^inet-tek,.*": description: Shenzhen iNet Mobile Internet Technology Co., Ltd "^infineon,.*": @@ -781,6 +785,8 @@ patternProperties: description: Nanjing Loongmasses Ltd. "^lsi,.*": description: LSI Corp. (LSI Logic) + "^lunzn,.*": + description: Shenzhen Lunzn Technology Co., Ltd. "^lwn,.*": description: Liebherr-Werk Nenzing GmbH "^lxa,.*": @@ -1189,6 +1195,8 @@ patternProperties: description: SHIFT GmbH "^shimafuji,.*": description: Shimafuji Electric, Inc. + "^shineworld,.*": + description: ShineWorld Innovations "^shiratech,.*": description: Shiratech Solutions "^si-en,.*": @@ -1267,6 +1275,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^square,.*": + description: Square "^ssi,.*": description: SSI Computer Corp "^sst,.*": @@ -1339,6 +1349,8 @@ patternProperties: description: Technologic Systems "^techstar,.*": description: Shenzhen Techstar Electronics Co., Ltd. + "^teejet,.*": + description: TeeJet "^teltonika,.*": description: Teltonika Networks "^tempo,.*": diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt deleted file mode 100644 index 2b86a00e351d..000000000000 --- a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom Kona Family Watchdog Timer ------------------------------------ - -This watchdog timer is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -Required properties: - - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; - - reg: memory address & range - -Example: - watchdog@35002f40 { - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; - reg = <0x35002f40 0x6c>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml new file mode 100644 index 000000000000..3d4403b41cbe --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/brcm,kona-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona Family Watchdog Timer + +description: | + This watchdog timer is used in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + items: + - const: brcm,bcm11351-wdt + - const: brcm,kona-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt deleted file mode 100644 index 750a87657448..000000000000 --- a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt +++ /dev/null @@ -1,23 +0,0 @@ -Zynq Watchdog Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,wdt-r1p2". -- clocks : This is pclk (APB clock). -- interrupts : This is wd_irq - watchdog timeout interrupt. - -Optional properties -- reset-on-timeout : If this property exists, then a reset is done - when watchdog times out. -- timeout-sec : Watchdog timeout value (in seconds). - -Example: - watchdog@f8005000 { - compatible = "cdns,wdt-r1p2"; - clocks = <&clkc 45>; - interrupt-parent = <&intc>; - interrupts = <0 9 1>; - reg = <0xf8005000 0x1000>; - reset-on-timeout; - timeout-sec = <10>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml new file mode 100644 index 000000000000..3c17c5883bce --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/cdns,wdt-r1p2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence watchdog timer controller + +maintainers: + - Neeli Srinivas <srinivas.neeli@amd.com> + +description: + The cadence watchdog timer is used to detect and recover from + system malfunctions. This watchdog contains 24 bit counter and + a programmable reset period. The timeout period varies from 1 ms + to 30 seconds while using a 100Mhz clock. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - cdns,wdt-r1p2 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-on-timeout: + type: boolean + description: | + If this property exists, then a reset is done when watchdog + times out. + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@f8005000 { + compatible = "cdns,wdt-r1p2"; + reg = <0xf8005000 0x1000>; + clocks = <&clkc 45>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>; + reset-on-timeout; + timeout-sec = <10>; + }; +... diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 519b48889eb1..f0a584af1223 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -17,11 +17,11 @@ description: | select: properties: $nodename: - pattern: "^watchdog(@.*|-[0-9a-f])?$" + pattern: "^watchdog(@.*|-([0-9]|[1-9][0-9]+))?$" properties: $nodename: - pattern: "^(timer|watchdog)(@.*|-[0-9a-f])?$" + pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$" timeout-sec: description: diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml new file mode 100644 index 000000000000..14b069599740 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/xlnx,versal-wwdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Versal window watchdog timer controller + +maintainers: + - Neeli Srinivas <srinivas.neeli@amd.com> + +description: + Versal watchdog intellectual property uses window watchdog mode. + Window watchdog timer(WWDT) contains closed(first) and open(second) + window with 32 bit width. Write to the watchdog timer within + predefined window periods of time. This means a period that is not + too soon and a period that is not too late. The WWDT has to be + restarted within the open window time. If software tries to restart + WWDT outside of the open window time period, it generates a reset. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - xlnx,versal-wwdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + watchdog@fd4d0000 { + compatible = "xlnx,versal-wwdt"; + reg = <0xfd4d0000 0x10000>; + clocks = <&clock25>; + timeout-sec = <30>; + }; +... diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml index 8444c56dd602..dc1ff39d05a0 100644 --- a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx AXI/PLB softcore and window Watchdog Timer maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> - - Srinivas Neeli <srinivas.neeli@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> + - Srinivas Neeli <srinivas.neeli@amd.com> description: The Timebase watchdog timer(WDT) is a free-running 32 bit counter. diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst index b6a287955ee5..0717426856b2 100644 --- a/Documentation/devicetree/usage-model.rst +++ b/Documentation/devicetree/usage-model.rst @@ -415,6 +415,6 @@ When using the DT, this creates problems for of_platform_populate() because it must decide whether to register each node as either a platform_device or an amba_device. This unfortunately complicates the device creation model a little bit, but the solution turns out not to -be too invasive. If a node is compatible with "arm,amba-primecell", then +be too invasive. If a node is compatible with "arm,primecell", then of_platform_populate() will register it as an amba_device instead of a platform_device. diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index 23edb427e76f..cd8ad7904491 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -313,9 +313,18 @@ the documentation build system will automatically turn a reference to function name exists. If you see ``c:func:`` use in a kernel document, please feel free to remove it. +Tables +------ + +ReStructuredText provides several options for table syntax. Kernel style for +tables is to prefer *simple table* syntax or *grid table* syntax. See the +`reStructuredText user reference for table syntax`_ for more details. + +.. _reStructuredText user reference for table syntax: + https://docutils.sourceforge.io/docs/user/rst/quickref.html#tables list tables ------------ +~~~~~~~~~~~ The list-table formats can be useful for tables that are not easily laid out in the usual Sphinx ASCII-art formats. These formats are nearly diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index 4b4d8e28d3be..7671b531ba1a 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -84,7 +84,13 @@ Reference counting Atomics ------- -.. kernel-doc:: arch/x86/include/asm/atomic.h +.. kernel-doc:: include/linux/atomic/atomic-instrumented.h + :internal: + +.. kernel-doc:: include/linux/atomic/atomic-arch-fallback.h + :internal: + +.. kernel-doc:: include/linux/atomic/atomic-long.h :internal: Kernel objects manipulation diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 4249eb4239e0..8be086b3f829 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -364,6 +364,7 @@ MEM devm_kmalloc_array() devm_kmemdup() devm_krealloc() + devm_krealloc_array() devm_kstrdup() devm_kstrdup_const() devm_kvasprintf() diff --git a/Documentation/driver-api/edac.rst b/Documentation/driver-api/edac.rst index b8c742aa0a71..f4f044b95c4f 100644 --- a/Documentation/driver-api/edac.rst +++ b/Documentation/driver-api/edac.rst @@ -106,6 +106,16 @@ will occupy those chip-select rows. This term is avoided because it is unclear when needing to distinguish between chip-select rows and socket sets. +* High Bandwidth Memory (HBM) + +HBM is a new memory type with low power consumption and ultra-wide +communication lanes. It uses vertically stacked memory chips (DRAM dies) +interconnected by microscopic wires called "through-silicon vias," or +TSVs. + +Several stacks of HBM chips connect to the CPU or GPU through an ultra-fast +interconnect called the "interposer". Therefore, HBM's characteristics +are nearly indistinguishable from on-chip integrated RAM. Memory Controllers ------------------ @@ -176,3 +186,113 @@ nodes:: the L1 and L2 directories would be "edac_device_block's" .. kernel-doc:: drivers/edac/edac_device.h + + +Heterogeneous system support +---------------------------- + +An AMD heterogeneous system is built by connecting the data fabrics of +both CPUs and GPUs via custom xGMI links. Thus, the data fabric on the +GPU nodes can be accessed the same way as the data fabric on CPU nodes. + +The MI200 accelerators are data center GPUs. They have 2 data fabrics, +and each GPU data fabric contains four Unified Memory Controllers (UMC). +Each UMC contains eight channels. Each UMC channel controls one 128-bit +HBM2e (2GB) channel (equivalent to 8 X 2GB ranks). This creates a total +of 4096-bits of DRAM data bus. + +While the UMC is interfacing a 16GB (8high X 2GB DRAM) HBM stack, each UMC +channel is interfacing 2GB of DRAM (represented as rank). + +Memory controllers on AMD GPU nodes can be represented in EDAC thusly: + + GPU DF / GPU Node -> EDAC MC + GPU UMC -> EDAC CSROW + GPU UMC channel -> EDAC CHANNEL + +For example: a heterogeneous system with 1 AMD CPU is connected to +4 MI200 (Aldebaran) GPUs using xGMI. + +Some more heterogeneous hardware details: + +- The CPU UMC (Unified Memory Controller) is mostly the same as the GPU UMC. + They have chip selects (csrows) and channels. However, the layouts are different + for performance, physical layout, or other reasons. +- CPU UMCs use 1 channel, In this case UMC = EDAC channel. This follows the + marketing speak. CPU has X memory channels, etc. +- CPU UMCs use up to 4 chip selects, So UMC chip select = EDAC CSROW. +- GPU UMCs use 1 chip select, So UMC = EDAC CSROW. +- GPU UMCs use 8 channels, So UMC channel = EDAC channel. + +The EDAC subsystem provides a mechanism to handle AMD heterogeneous +systems by calling system specific ops for both CPUs and GPUs. + +AMD GPU nodes are enumerated in sequential order based on the PCI +hierarchy, and the first GPU node is assumed to have a Node ID value +following those of the CPU nodes after latter are fully populated:: + + $ ls /sys/devices/system/edac/mc/ + mc0 - CPU MC node 0 + mc1 | + mc2 |- GPU card[0] => node 0(mc1), node 1(mc2) + mc3 | + mc4 |- GPU card[1] => node 0(mc3), node 1(mc4) + mc5 | + mc6 |- GPU card[2] => node 0(mc5), node 1(mc6) + mc7 | + mc8 |- GPU card[3] => node 0(mc7), node 1(mc8) + +For example, a heterogeneous system with one AMD CPU is connected to +four MI200 (Aldebaran) GPUs using xGMI. This topology can be represented +via the following sysfs entries:: + + /sys/devices/system/edac/mc/.. + + CPU # CPU node + ├── mc 0 + + GPU Nodes are enumerated sequentially after CPU nodes have been populated + GPU card 1 # Each MI200 GPU has 2 nodes/mcs + ├── mc 1 # GPU node 0 == mc1, Each MC node has 4 UMCs/CSROWs + │  ├── csrow 0 # UMC 0 + │  │  ├── channel 0 # Each UMC has 8 channels + │  │  ├── channel 1 # size of each channel is 2 GB, so each UMC has 16 GB + │  │  ├── channel 2 + │  │  ├── channel 3 + │  │  ├── channel 4 + │  │  ├── channel 5 + │  │  ├── channel 6 + │  │  ├── channel 7 + │  ├── csrow 1 # UMC 1 + │  │  ├── channel 0 + │  │  ├── .. + │  │  ├── channel 7 + │  ├── .. .. + │  ├── csrow 3 # UMC 3 + │  │  ├── channel 0 + │  │  ├── .. + │  │  ├── channel 7 + │  ├── rank 0 + │  ├── .. .. + │  ├── rank 31 # total 32 ranks/dimms from 4 UMCs + ├ + ├── mc 2 # GPU node 1 == mc2 + │  ├── .. # each GPU has total 64 GB + + GPU card 2 + ├── mc 3 + │  ├── .. + ├── mc 4 + │  ├── .. + + GPU card 3 + ├── mc 5 + │  ├── .. + ├── mc 6 + │  ├── .. + + GPU card 4 + ├── mc 7 + │  ├── .. + ├── mc 8 + │  ├── .. diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst index 78372853c6d4..b6505914791c 100644 --- a/Documentation/driver-api/gpio/legacy.rst +++ b/Documentation/driver-api/gpio/legacy.rst @@ -165,8 +165,7 @@ Most GPIO controllers can be accessed with memory read/write instructions. Those don't need to sleep, and can safely be done from inside hard (nonthreaded) IRQ handlers and similar contexts. -Use the following calls to access such GPIOs, -for which gpio_cansleep() will always return false (see below):: +Use the following calls to access such GPIOs:: /* GPIO INPUT: return zero or nonzero */ int gpio_get_value(unsigned gpio); @@ -200,13 +199,6 @@ Some GPIO controllers must be accessed using message based busses like I2C or SPI. Commands to read or write those GPIO values require waiting to get to the head of a queue to transmit a command and get its response. This requires sleeping, which can't be done from inside IRQ handlers. - -Platforms that support this type of GPIO distinguish them from other GPIOs -by returning nonzero from this call (which requires a valid GPIO number, -which should have been previously allocated with gpio_request):: - - int gpio_cansleep(unsigned gpio); - To access such GPIOs, a different set of accessors is defined:: /* GPIO INPUT: return zero or nonzero, might sleep */ @@ -215,7 +207,6 @@ To access such GPIOs, a different set of accessors is defined:: /* GPIO OUTPUT, might sleep */ void gpio_set_value_cansleep(unsigned gpio, int value); - Accessing such GPIOs requires a context which may sleep, for example a threaded IRQ handler, and those accessors must be used instead of spinlock-safe accessors without the cansleep() name suffix. @@ -319,11 +310,6 @@ where 'flags' is currently defined to specify the following properties: * GPIOF_INIT_LOW - as output, set initial level to LOW * GPIOF_INIT_HIGH - as output, set initial level to HIGH - * GPIOF_OPEN_DRAIN - gpio pin is open drain type. - * GPIOF_OPEN_SOURCE - gpio pin is open source type. - - * GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction - * GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction since GPIOF_INIT_* are only valid when configured as output, so group valid combinations as: @@ -332,20 +318,6 @@ combinations as: * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH -When setting the flag as GPIOF_OPEN_DRAIN then it will assume that pins is -open drain type. Such pins will not be driven to 1 in output mode. It is -require to connect pull-up on such pins. By enabling this flag, gpio lib will -make the direction to input when it is asked to set value of 1 in output mode -to make the pin HIGH. The pin is make to LOW by driving value 0 in output mode. - -When setting the flag as GPIOF_OPEN_SOURCE then it will assume that pins is -open source type. Such pins will not be driven to 0 in output mode. It is -require to connect pull-down on such pin. By enabling this flag, gpio lib will -make the direction to input when it is asked to set value of 0 in output mode -to make the pin LOW. The pin is make to HIGH by driving value 1 in output mode. - -In the future, these flags can be extended to support more properties. - Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is introduced to encapsulate all three fields as:: @@ -556,7 +528,6 @@ code, which always dispatches through the gpio_chip:: #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value - #define gpio_cansleep __gpio_cansleep Fancier implementations could instead define those as inline functions with logic optimizing access to specific SOC-based GPIOs. For example, if the diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index ff9aa1afdc62..1e16a40da3ba 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -113,6 +113,7 @@ available subsections can be seen below. xillybus zorro hte/index + wmi .. only:: subproject and html diff --git a/Documentation/driver-api/media/camera-sensor.rst b/Documentation/driver-api/media/camera-sensor.rst index c7d4891bd24e..93f4f2536c25 100644 --- a/Documentation/driver-api/media/camera-sensor.rst +++ b/Documentation/driver-api/media/camera-sensor.rst @@ -151,3 +151,25 @@ used to obtain device's power state after the power state transition: The function returns a non-zero value if it succeeded getting the power count or runtime PM was disabled, in either of which cases the driver may proceed to access the device. + +Rotation, orientation and flipping +---------------------------------- + +Some systems have the camera sensor mounted upside down compared to its natural +mounting rotation. In such cases, drivers shall expose the information to +userspace with the :ref:`V4L2_CID_CAMERA_SENSOR_ROTATION +<v4l2-camera-sensor-rotation>` control. + +Sensor drivers shall also report the sensor's mounting orientation with the +:ref:`V4L2_CID_CAMERA_SENSOR_ORIENTATION <v4l2-camera-sensor-orientation>`. + +Use ``v4l2_fwnode_device_parse()`` to obtain rotation and orientation +information from system firmware and ``v4l2_ctrl_new_fwnode_properties()`` to +register the appropriate controls. + +Sensor drivers that have any vertical or horizontal flips embedded in the +register programming sequences shall initialize the V4L2_CID_HFLIP and +V4L2_CID_VFLIP controls with the values programmed by the register sequences. +The default values of these controls shall be 0 (disabled). Especially these +controls shall not be inverted, independently of the sensor's mounting +rotation. diff --git a/Documentation/driver-api/ntb.rst b/Documentation/driver-api/ntb.rst index 11577c2105c5..e991d92b8b1d 100644 --- a/Documentation/driver-api/ntb.rst +++ b/Documentation/driver-api/ntb.rst @@ -207,9 +207,9 @@ The MSI test client serves to test and debug the MSI library which allows for passing MSI interrupts across NTB memory windows. The test client is interacted with through the debugfs filesystem: -* *debugfs*/ntb\_tool/*hw*/ +* *debugfs*/ntb\_msi\_test/*hw*/ A directory in debugfs will be created for each - NTB device probed by the tool. This directory is shortened to *hw* + NTB device probed by the msi test. This directory is shortened to *hw* below. * *hw*/port This file describes the local port number diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst index 664838ae7776..5e033c3b11b3 100644 --- a/Documentation/driver-api/ptp.rst +++ b/Documentation/driver-api/ptp.rst @@ -73,6 +73,22 @@ Writing clock drivers class driver, since the lock may also be needed by the clock driver's interrupt service routine. +PTP hardware clock requirements for '.adjphase' +----------------------------------------------- + + The 'struct ptp_clock_info' interface has a '.adjphase' function. + This function has a set of requirements from the PHC in order to be + implemented. + + * The PHC implements a servo algorithm internally that is used to + correct the offset passed in the '.adjphase' call. + * When other PTP adjustment functions are called, the PHC servo + algorithm is disabled. + + **NOTE:** '.adjphase' is not a simple time adjustment functionality + that 'jumps' the PHC clock time based on the provided offset. It + should correct the offset provided using an internal algorithm. + Supported hardware ================== @@ -106,3 +122,16 @@ Supported hardware - LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.8273.2)) - Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk to ASSPs/SoCs/FPGAs) - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional) + + * NVIDIA Mellanox + + - GPIO + - Certain variants of ConnectX-6 Dx and later products support one + GPIO which can time stamp external triggers and one GPIO to produce + periodic signals. + - Certain variants of ConnectX-5 and older products support one GPIO, + configured to either time stamp external triggers or produce + periodic signals. + - PHC instances + - All ConnectX devices have a free-running counter + - ConnectX-6 Dx and later devices have a UTC format counter diff --git a/Documentation/driver-api/wmi.rst b/Documentation/driver-api/wmi.rst new file mode 100644 index 000000000000..6ca58c8249e5 --- /dev/null +++ b/Documentation/driver-api/wmi.rst @@ -0,0 +1,21 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +============== +WMI Driver API +============== + +The WMI driver core supports a more modern bus-based interface for interacting +with WMI devices, and an older GUID-based interface. The latter interface is +considered to be deprecated, so new WMI drivers should generally avoid it since +it has some issues with multiple WMI devices and events sharing the same GUIDs +and/or notification IDs. The modern bus-based interface instead maps each +WMI device to a :c:type:`struct wmi_device <wmi_device>`, so it supports +WMI devices sharing GUIDs and/or notification IDs. Drivers can then register +a :c:type:`struct wmi_driver <wmi_driver>`, which will be bound to compatible +WMI devices by the driver core. + +.. kernel-doc:: include/linux/wmi.h + :internal: + +.. kernel-doc:: drivers/platform/x86/wmi.c + :export: diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst index 3abe84225613..1f087e502ca6 100644 --- a/Documentation/fault-injection/provoke-crashes.rst +++ b/Documentation/fault-injection/provoke-crashes.rst @@ -29,7 +29,7 @@ recur_count cpoint_name Where in the kernel to trigger the action. It can be one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY, - FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT. + FS_SUBMIT_BH, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT. cpoint_type Indicates the action to be taken on hitting the crash point. diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 2328eada3a49..94d9dece580f 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -13,7 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | - | loongarch: | TODO | + | loongarch: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt index 0cfa5f0e4db1..4e205ef70363 100644 --- a/Documentation/features/debug/kmemleak/arch-support.txt +++ b/Documentation/features/debug/kmemleak/arch-support.txt @@ -13,7 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | - | loongarch: | TODO | + | loongarch: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/filesystems/autofs-mount-control.rst b/Documentation/filesystems/autofs-mount-control.rst index bf4b511cdbe8..b5a379d25c40 100644 --- a/Documentation/filesystems/autofs-mount-control.rst +++ b/Documentation/filesystems/autofs-mount-control.rst @@ -196,7 +196,7 @@ information and return operation results:: struct args_ismountpoint ismountpoint; }; - char path[0]; + char path[]; }; The ioctlfd field is a mount point file descriptor of an autofs mount diff --git a/Documentation/filesystems/autofs.rst b/Documentation/filesystems/autofs.rst index 4f490278d22f..3b6e38e646cd 100644 --- a/Documentation/filesystems/autofs.rst +++ b/Documentation/filesystems/autofs.rst @@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure:: struct args_ismountpoint ismountpoint; }; - char path[0]; + char path[]; }; For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target diff --git a/Documentation/filesystems/directory-locking.rst b/Documentation/filesystems/directory-locking.rst index 504ba940c36c..dccd61c7c5c3 100644 --- a/Documentation/filesystems/directory-locking.rst +++ b/Documentation/filesystems/directory-locking.rst @@ -22,12 +22,11 @@ exclusive. 3) object removal. Locking rules: caller locks parent, finds victim, locks victim and calls the method. Locks are exclusive. -4) rename() that is _not_ cross-directory. Locking rules: caller locks -the parent and finds source and target. In case of exchange (with -RENAME_EXCHANGE in flags argument) lock both. In any case, -if the target already exists, lock it. If the source is a non-directory, -lock it. If we need to lock both, lock them in inode pointer order. -Then call the method. All locks are exclusive. +4) rename() that is _not_ cross-directory. Locking rules: caller locks the +parent and finds source and target. We lock both (provided they exist). If we +need to lock two inodes of different type (dir vs non-dir), we lock directory +first. If we need to lock two inodes of the same type, lock them in inode +pointer order. Then call the method. All locks are exclusive. NB: we might get away with locking the source (and target in exchange case) shared. @@ -44,15 +43,17 @@ All locks are exclusive. rules: * lock the filesystem - * lock parents in "ancestors first" order. + * lock parents in "ancestors first" order. If one is not ancestor of + the other, lock them in inode pointer order. * find source and target. * if old parent is equal to or is a descendent of target fail with -ENOTEMPTY * if new parent is equal to or is a descendent of source fail with -ELOOP - * If it's an exchange, lock both the source and the target. - * If the target exists, lock it. If the source is a non-directory, - lock it. If we need to lock both, do so in inode pointer order. + * Lock both the source and the target provided they exist. If we + need to lock two inodes of different type (dir vs non-dir), we lock + the directory first. If we need to lock two inodes of the same type, + lock them in inode pointer order. * call the method. All ->i_rwsem are taken exclusive. Again, we might get away with locking @@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free. Proof: - First of all, at any moment we have a partial ordering of the - objects - A < B iff A is an ancestor of B. + First of all, at any moment we have a linear ordering of the + objects - A < B iff (A is an ancestor of B) or (B is not an ancestor + of A and ptr(A) < ptr(B)). That ordering can change. However, the following is true: diff --git a/Documentation/filesystems/dlmfs.rst b/Documentation/filesystems/dlmfs.rst index 28dd41a63be2..7e2b1fd471d7 100644 --- a/Documentation/filesystems/dlmfs.rst +++ b/Documentation/filesystems/dlmfs.rst @@ -12,7 +12,7 @@ dlmfs is built with OCFS2 as it requires most of its infrastructure. :Project web page: http://ocfs2.wiki.kernel.org :Tools web page: https://github.com/markfasheh/ocfs2-tools -:OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/ +:OCFS2 mailing lists: https://subspace.kernel.org/lists.linux.dev.html All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index a6bef5293a60..6e8fb2d4b46f 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -260,8 +260,13 @@ which is 1024 bytes long: - s_num_fc_blocks - Number of fast commit blocks in the journal. * - 0x58 + - __be32 + - s_head + - Block number of the head (first unused block) of the journal, only + up-to-date when the journal is empty. + * - 0x5C - __u32 - - s_padding[42] + - s_padding[40] - * - 0xFC - __be32 diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index c57745375edb..9359978a5af2 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -351,6 +351,22 @@ age_extent_cache Enable an age extent cache based on rb-tree. It records data block update frequency of the extent per inode, in order to provide better temperature hints for data block allocation. +errors=%s Specify f2fs behavior on critical errors. This supports modes: + "panic", "continue" and "remount-ro", respectively, trigger + panic immediately, continue without doing anything, and remount + the partition in read-only mode. By default it uses "continue" + mode. + ====================== =============== =============== ======== + mode continue remount-ro panic + ====================== =============== =============== ======== + access ops normal noraml N/A + syscall errors -EIO -EROFS N/A + mount option rw ro N/A + pending dir write keep keep N/A + pending non-dir write drop keep N/A + pending node write drop keep N/A + pending meta write keep keep N/A + ====================== =============== =============== ======== ======================== ============================================================ Debugfs Entries diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst index ede672dedf11..cb845e8e5435 100644 --- a/Documentation/filesystems/fsverity.rst +++ b/Documentation/filesystems/fsverity.rst @@ -38,20 +38,14 @@ fail at runtime. Use cases ========= -By itself, the base fs-verity feature only provides integrity -protection, i.e. detection of accidental (non-malicious) corruption. +By itself, fs-verity only provides integrity protection, i.e. +detection of accidental (non-malicious) corruption. However, because fs-verity makes retrieving the file hash extremely efficient, it's primarily meant to be used as a tool to support authentication (detection of malicious modifications) or auditing (logging file hashes before use). -Trusted userspace code (e.g. operating system code running on a -read-only partition that is itself authenticated by dm-verity) can -authenticate the contents of an fs-verity file by using the -`FS_IOC_MEASURE_VERITY`_ ioctl to retrieve its hash, then verifying a -digital signature of it. - A standard file hash could be used instead of fs-verity. However, this is inefficient if the file is large and only a small portion may be accessed. This is often the case for Android application package @@ -69,24 +63,31 @@ still be used on read-only filesystems. fs-verity is for files that must live on a read-write filesystem because they are independently updated and potentially user-installed, so dm-verity cannot be used. -The base fs-verity feature is a hashing mechanism only; actually -authenticating the files may be done by: - -* Userspace-only - -* Builtin signature verification + userspace policy - - fs-verity optionally supports a simple signature verification - mechanism where users can configure the kernel to require that - all fs-verity files be signed by a key loaded into a keyring; - see `Built-in signature verification`_. - -* Integrity Measurement Architecture (IMA) - - IMA supports including fs-verity file digests and signatures in the - IMA measurement list and verifying fs-verity based file signatures - stored as security.ima xattrs, based on policy. - +fs-verity does not mandate a particular scheme for authenticating its +file hashes. (Similarly, dm-verity does not mandate a particular +scheme for authenticating its block device root hashes.) Options for +authenticating fs-verity file hashes include: + +- Trusted userspace code. Often, the userspace code that accesses + files can be trusted to authenticate them. Consider e.g. an + application that wants to authenticate data files before using them, + or an application loader that is part of the operating system (which + is already authenticated in a different way, such as by being loaded + from a read-only partition that uses dm-verity) and that wants to + authenticate applications before loading them. In these cases, this + trusted userspace code can authenticate a file's contents by + retrieving its fs-verity digest using `FS_IOC_MEASURE_VERITY`_, then + verifying a signature of it using any userspace cryptographic + library that supports digital signatures. + +- Integrity Measurement Architecture (IMA). IMA supports fs-verity + file digests as an alternative to its traditional full file digests. + "IMA appraisal" enforces that files contain a valid, matching + signature in their "security.ima" extended attribute, as controlled + by the IMA policy. For more information, see the IMA documentation. + +- Trusted userspace code in combination with `Built-in signature + verification`_. This approach should be used only with great care. User API ======== @@ -111,8 +112,7 @@ follows:: }; This structure contains the parameters of the Merkle tree to build for -the file, and optionally contains a signature. It must be initialized -as follows: +the file. It must be initialized as follows: - ``version`` must be 1. - ``hash_algorithm`` must be the identifier for the hash algorithm to @@ -129,12 +129,14 @@ as follows: file or device. Currently the maximum salt size is 32 bytes. - ``salt_ptr`` is the pointer to the salt, or NULL if no salt is provided. -- ``sig_size`` is the size of the signature in bytes, or 0 if no - signature is provided. Currently the signature is (somewhat - arbitrarily) limited to 16128 bytes. See `Built-in signature - verification`_ for more information. -- ``sig_ptr`` is the pointer to the signature, or NULL if no - signature is provided. +- ``sig_size`` is the size of the builtin signature in bytes, or 0 if no + builtin signature is provided. Currently the builtin signature is + (somewhat arbitrarily) limited to 16128 bytes. +- ``sig_ptr`` is the pointer to the builtin signature, or NULL if no + builtin signature is provided. A builtin signature is only needed + if the `Built-in signature verification`_ feature is being used. It + is not needed for IMA appraisal, and it is not needed if the file + signature is being handled entirely in userspace. - All reserved fields must be zeroed. FS_IOC_ENABLE_VERITY causes the filesystem to build a Merkle tree for @@ -158,7 +160,7 @@ fatal signal), no changes are made to the file. FS_IOC_ENABLE_VERITY can fail with the following errors: - ``EACCES``: the process does not have write access to the file -- ``EBADMSG``: the signature is malformed +- ``EBADMSG``: the builtin signature is malformed - ``EBUSY``: this ioctl is already running on the file - ``EEXIST``: the file already has verity enabled - ``EFAULT``: the caller provided inaccessible memory @@ -168,10 +170,10 @@ FS_IOC_ENABLE_VERITY can fail with the following errors: reserved bits are set; or the file descriptor refers to neither a regular file nor a directory. - ``EISDIR``: the file descriptor refers to a directory -- ``EKEYREJECTED``: the signature doesn't match the file -- ``EMSGSIZE``: the salt or signature is too long -- ``ENOKEY``: the fs-verity keyring doesn't contain the certificate - needed to verify the signature +- ``EKEYREJECTED``: the builtin signature doesn't match the file +- ``EMSGSIZE``: the salt or builtin signature is too long +- ``ENOKEY``: the ".fs-verity" keyring doesn't contain the certificate + needed to verify the builtin signature - ``ENOPKG``: fs-verity recognizes the hash algorithm, but it's not available in the kernel's crypto API as currently configured (e.g. for SHA-512, missing CONFIG_CRYPTO_SHA512). @@ -180,8 +182,8 @@ FS_IOC_ENABLE_VERITY can fail with the following errors: support; or the filesystem superblock has not had the 'verity' feature enabled on it; or the filesystem does not support fs-verity on this file. (See `Filesystem support`_.) -- ``EPERM``: the file is append-only; or, a signature is required and - one was not provided. +- ``EPERM``: the file is append-only; or, a builtin signature is + required and one was not provided. - ``EROFS``: the filesystem is read-only - ``ETXTBSY``: someone has the file open for writing. This can be the caller's file descriptor, another open file descriptor, or the file @@ -270,9 +272,9 @@ This ioctl takes in a pointer to the following structure:: - ``FS_VERITY_METADATA_TYPE_DESCRIPTOR`` reads the fs-verity descriptor. See `fs-verity descriptor`_. -- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the signature which was - passed to FS_IOC_ENABLE_VERITY, if any. See `Built-in signature - verification`_. +- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the builtin signature + which was passed to FS_IOC_ENABLE_VERITY, if any. See `Built-in + signature verification`_. The semantics are similar to those of ``pread()``. ``offset`` specifies the offset in bytes into the metadata item to read from, and @@ -299,7 +301,7 @@ FS_IOC_READ_VERITY_METADATA can fail with the following errors: overflowed - ``ENODATA``: the file is not a verity file, or FS_VERITY_METADATA_TYPE_SIGNATURE was requested but the file doesn't - have a built-in signature + have a builtin signature - ``ENOTTY``: this type of filesystem does not implement fs-verity, or this ioctl is not yet implemented on it - ``EOPNOTSUPP``: the kernel was not configured with fs-verity @@ -347,8 +349,8 @@ non-verity one, with the following exceptions: with EIO (for read()) or SIGBUS (for mmap() reads). - If the sysctl "fs.verity.require_signatures" is set to 1 and the - file is not signed by a key in the fs-verity keyring, then opening - the file will fail. See `Built-in signature verification`_. + file is not signed by a key in the ".fs-verity" keyring, then + opening the file will fail. See `Built-in signature verification`_. Direct access to the Merkle tree is not supported. Therefore, if a verity file is copied, or is backed up and restored, then it will lose @@ -433,20 +435,25 @@ root hash as well as other fields such as the file size:: Built-in signature verification =============================== -With CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, fs-verity supports putting -a portion of an authentication policy (see `Use cases`_) in the -kernel. Specifically, it adds support for: +CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y adds supports for in-kernel +verification of fs-verity builtin signatures. + +**IMPORTANT**! Please take great care before using this feature. +It is not the only way to do signatures with fs-verity, and the +alternatives (such as userspace signature verification, and IMA +appraisal) can be much better. It's also easy to fall into a trap +of thinking this feature solves more problems than it actually does. + +Enabling this option adds the following: -1. At fs-verity module initialization time, a keyring ".fs-verity" is - created. The root user can add trusted X.509 certificates to this - keyring using the add_key() system call, then (when done) - optionally use keyctl_restrict_keyring() to prevent additional - certificates from being added. +1. At boot time, the kernel creates a keyring named ".fs-verity". The + root user can add trusted X.509 certificates to this keyring using + the add_key() system call. 2. `FS_IOC_ENABLE_VERITY`_ accepts a pointer to a PKCS#7 formatted detached signature in DER format of the file's fs-verity digest. - On success, this signature is persisted alongside the Merkle tree. - Then, any time the file is opened, the kernel will verify the + On success, the ioctl persists the signature alongside the Merkle + tree. Then, any time the file is opened, the kernel verifies the file's actual digest against this signature, using the certificates in the ".fs-verity" keyring. @@ -454,8 +461,8 @@ kernel. Specifically, it adds support for: When set to 1, the kernel requires that all verity files have a correctly signed digest as described in (2). -fs-verity file digests must be signed in the following format, which -is similar to the structure used by `FS_IOC_MEASURE_VERITY`_:: +The data that the signature as described in (2) must be a signature of +is the fs-verity file digest in the following format:: struct fsverity_formatted_digest { char magic[8]; /* must be "FSVerity" */ @@ -464,13 +471,66 @@ is similar to the structure used by `FS_IOC_MEASURE_VERITY`_:: __u8 digest[]; }; -fs-verity's built-in signature verification support is meant as a -relatively simple mechanism that can be used to provide some level of -authenticity protection for verity files, as an alternative to doing -the signature verification in userspace or using IMA-appraisal. -However, with this mechanism, userspace programs still need to check -that the verity bit is set, and there is no protection against verity -files being swapped around. +That's it. It should be emphasized again that fs-verity builtin +signatures are not the only way to do signatures with fs-verity. See +`Use cases`_ for an overview of ways in which fs-verity can be used. +fs-verity builtin signatures have some major limitations that should +be carefully considered before using them: + +- Builtin signature verification does *not* make the kernel enforce + that any files actually have fs-verity enabled. Thus, it is not a + complete authentication policy. Currently, if it is used, the only + way to complete the authentication policy is for trusted userspace + code to explicitly check whether files have fs-verity enabled with a + signature before they are accessed. (With + fs.verity.require_signatures=1, just checking whether fs-verity is + enabled suffices.) But, in this case the trusted userspace code + could just store the signature alongside the file and verify it + itself using a cryptographic library, instead of using this feature. + +- A file's builtin signature can only be set at the same time that + fs-verity is being enabled on the file. Changing or deleting the + builtin signature later requires re-creating the file. + +- Builtin signature verification uses the same set of public keys for + all fs-verity enabled files on the system. Different keys cannot be + trusted for different files; each key is all or nothing. + +- The sysctl fs.verity.require_signatures applies system-wide. + Setting it to 1 only works when all users of fs-verity on the system + agree that it should be set to 1. This limitation can prevent + fs-verity from being used in cases where it would be helpful. + +- Builtin signature verification can only use signature algorithms + that are supported by the kernel. For example, the kernel does not + yet support Ed25519, even though this is often the signature + algorithm that is recommended for new cryptographic designs. + +- fs-verity builtin signatures are in PKCS#7 format, and the public + keys are in X.509 format. These formats are commonly used, + including by some other kernel features (which is why the fs-verity + builtin signatures use them), and are very feature rich. + Unfortunately, history has shown that code that parses and handles + these formats (which are from the 1990s and are based on ASN.1) + often has vulnerabilities as a result of their complexity. This + complexity is not inherent to the cryptography itself. + + fs-verity users who do not need advanced features of X.509 and + PKCS#7 should strongly consider using simpler formats, such as plain + Ed25519 keys and signatures, and verifying signatures in userspace. + + fs-verity users who choose to use X.509 and PKCS#7 anyway should + still consider that verifying those signatures in userspace is more + flexible (for other reasons mentioned earlier in this document) and + eliminates the need to enable CONFIG_FS_VERITY_BUILTIN_SIGNATURES + and its associated increase in kernel attack surface. In some cases + it can even be necessary, since advanced X.509 and PKCS#7 features + do not always work as intended with the kernel. For example, the + kernel does not check X.509 certificate validity times. + + Note: IMA appraisal, which supports fs-verity, does not use PKCS#7 + for its signatures, so it partially avoids the issues discussed + here. IMA appraisal does use X.509. Filesystem support ================== diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index fbb2b5ada95b..eb252fc972aa 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -72,7 +72,6 @@ Documentation for filesystem implementations. befs bfs btrfs - cifs/index ceph coda configfs @@ -111,6 +110,7 @@ Documentation for filesystem implementations. ramfs-rootfs-initramfs relay romfs + smb/index spufs/index squashfs sysfs diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index aa1a233b0fa8..ed148919e11a 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -521,8 +521,6 @@ prototypes:: int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); - ssize_t (*sendpage) (struct file *, struct page *, int, size_t, - loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); diff --git a/Documentation/filesystems/nfs/exporting.rst b/Documentation/filesystems/nfs/exporting.rst index 0e98edd353b5..3d97b8d8f735 100644 --- a/Documentation/filesystems/nfs/exporting.rst +++ b/Documentation/filesystems/nfs/exporting.rst @@ -122,8 +122,8 @@ are exportable by setting the s_export_op field in the struct super_block. This field must point to a "struct export_operations" struct which has the following members: - encode_fh (optional) - Takes a dentry and creates a filehandle fragment which can later be used + encode_fh (optional) + Takes a dentry and creates a filehandle fragment which may later be used to find or create a dentry for the same object. The default implementation creates a filehandle fragment that encodes a 32bit inode and generation number for the inode encoded, and if necessary the diff --git a/Documentation/filesystems/ocfs2.rst b/Documentation/filesystems/ocfs2.rst index 42ca9a3d4c6e..5827062995cb 100644 --- a/Documentation/filesystems/ocfs2.rst +++ b/Documentation/filesystems/ocfs2.rst @@ -14,7 +14,7 @@ get "mount.ocfs2" and "ocfs2_hb_ctl". Project web page: http://ocfs2.wiki.kernel.org Tools git tree: https://github.com/markfasheh/ocfs2-tools -OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/ +OCFS2 mailing lists: https://subspace.kernel.org/lists.linux.dev.html All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index 4c76fda07645..eb7d2c88ddec 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -231,12 +231,11 @@ Mount options: Redirects are enabled. - "redirect_dir=follow": Redirects are not created, but followed. -- "redirect_dir=off": - Redirects are not created and only followed if "redirect_always_follow" - feature is enabled in the kernel/module config. - "redirect_dir=nofollow": - Redirects are not created and not followed (equivalent to "redirect_dir=off" - if "redirect_always_follow" feature is not enabled). + Redirects are not created and not followed. +- "redirect_dir=off": + If "redirect_always_follow" is enabled in the kernel/module config, + this "off" traslates to "follow", otherwise it translates to "nofollow". When the NFS export feature is enabled, every copied up directory is indexed by the file handle of the lower inode and a file handle of the @@ -371,6 +370,41 @@ conflict with metacopy=on, and will result in an error. [*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is given. + +Data-only lower layers +---------------------- + +With "metacopy" feature enabled, an overlayfs regular file may be a composition +of information from up to three different layers: + + 1) metadata from a file in the upper layer + + 2) st_ino and st_dev object identifier from a file in a lower layer + + 3) data from a file in another lower layer (further below) + +The "lower data" file can be on any lower layer, except from the top most +lower layer. + +Below the top most lower layer, any number of lower most layers may be defined +as "data-only" lower layers, using double colon ("::") separators. +A normal lower layer is not allowed to be below a data-only layer, so single +colon separators are not allowed to the right of double colon ("::") separators. + + +For example: + + mount -t overlay overlay -olowerdir=/l1:/l2:/l3::/do1::/do2 /merged + +The paths of files in the "data-only" lower layers are not visible in the +merged overlayfs directories and the metadata and st_ino/st_dev of files +in the "data-only" lower layers are not visible in overlayfs inodes. + +Only the data of the files in the "data-only" lower layers may be visible +when a "metacopy" file in one of the lower layers above it, has a "redirect" +to the absolute path of the "lower data" file in the "data-only" lower layer. + + Sharing and copying layers -------------------------- diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.rst b/Documentation/filesystems/ramfs-rootfs-initramfs.rst index 164960631925..447f767c6462 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.rst +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst @@ -6,8 +6,7 @@ Ramfs, rootfs and initramfs October 17, 2005 -Rob Landley <rob@landley.net> -============================= +:Author: Rob Landley <rob@landley.net> What is ramfs? -------------- diff --git a/Documentation/filesystems/sharedsubtree.rst b/Documentation/filesystems/sharedsubtree.rst index d83395354250..1cf56489ed48 100644 --- a/Documentation/filesystems/sharedsubtree.rst +++ b/Documentation/filesystems/sharedsubtree.rst @@ -147,6 +147,7 @@ replicas continue to be exactly same. 3) Setting mount states +----------------------- The mount command (util-linux package) can be used to set mount states:: @@ -612,6 +613,7 @@ replicas continue to be exactly same. 6) Quiz +------- A. What is the result of the following command sequence? @@ -673,6 +675,7 @@ replicas continue to be exactly same. /mnt/1/test be? 7) FAQ +------ Q1. Why is bind mount needed? How is it different from symbolic links? symbolic links can get stale if the destination mount gets @@ -841,6 +844,7 @@ replicas continue to be exactly same. tmp usr tmp usr tmp usr 8) Implementation +----------------- 8A) Datastructure diff --git a/Documentation/filesystems/cifs/cifsroot.rst b/Documentation/filesystems/smb/cifsroot.rst index 4930bb443134..bf2d9db3acb9 100644 --- a/Documentation/filesystems/cifs/cifsroot.rst +++ b/Documentation/filesystems/smb/cifsroot.rst @@ -59,7 +59,7 @@ the root file system via SMB protocol. Enables the kernel to mount the root file system via SMB that are located in the <server-ip> and <share> specified in this option. -The default mount options are set in fs/cifs/cifsroot.c. +The default mount options are set in fs/smb/client/cifsroot.c. server-ip IPv4 address of the server. diff --git a/Documentation/filesystems/cifs/index.rst b/Documentation/filesystems/smb/index.rst index 1c8597a679ab..1c8597a679ab 100644 --- a/Documentation/filesystems/cifs/index.rst +++ b/Documentation/filesystems/smb/index.rst diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/smb/ksmbd.rst index 7bed96d794fc..7bed96d794fc 100644 --- a/Documentation/filesystems/cifs/ksmbd.rst +++ b/Documentation/filesystems/smb/ksmbd.rst diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst index 769be5230210..cb2a97e49872 100644 --- a/Documentation/filesystems/vfs.rst +++ b/Documentation/filesystems/vfs.rst @@ -1086,7 +1086,6 @@ This describes how the VFS can manipulate an open file. As of kernel int (*fsync) (struct file *, loff_t, loff_t, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); - ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); int (*flock) (struct file *, int, struct file_lock *); diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst index f80f95667ca2..43c968871d99 100644 --- a/Documentation/fpga/index.rst +++ b/Documentation/fpga/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ==== -fpga +FPGA ==== .. toctree:: diff --git a/Documentation/gpu/amdgpu/apu-asic-info-table.csv b/Documentation/gpu/amdgpu/apu-asic-info-table.csv index 395a7b7bfaef..2e76b427ba1e 100644 --- a/Documentation/gpu/amdgpu/apu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/apu-asic-info-table.csv @@ -5,6 +5,8 @@ Ryzen 4000 series, RENOIR, DCN 2.1, 9.3, VCN 2.2, 4.1.2, 11.0.3 Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN2, DCN 1.0, 9.2.2, VCN 1.0.1, 4.1.1, 10.0.1 SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1, 11.5.0 Ryzen 5000 series / Ryzen 7x30 series, GREEN SARDINE / Cezanne / Barcelo / Barcelo-R, DCN 2.1, 9.3, VCN 2.2, 4.1.1, 12.0.1 -Ryzen 6000 series / Ryzen 7x35 series, YELLOW CARP / Rembrandt / Rembrandt+, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3 +Ryzen 6000 series / Ryzen 7x35 series / Ryzen 7x36 series, YELLOW CARP / Rembrandt / Rembrandt-R, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3 Ryzen 7000 series (AM5), Raphael, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 +Ryzen 7x45 series (FL1), / Dragon Range, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8 +Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
\ No newline at end of file diff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rst index b46327356e80..fe35a291ff3e 100644 --- a/Documentation/gpu/drm-usage-stats.rst +++ b/Documentation/gpu/drm-usage-stats.rst @@ -24,7 +24,7 @@ File format specification - All keys shall be prefixed with `drm-`. - Whitespace between the delimiter and first non-whitespace character shall be ignored when parsing. -- Neither keys or values are allowed to contain whitespace characters. +- Keys are not allowed to contain whitespace characters. - Numerical key value pairs can end with optional unit string. - Data type of the value is fixed as defined in the specification. @@ -39,12 +39,13 @@ Data types ---------- - <uint> - Unsigned integer without defining the maximum value. -- <str> - String excluding any above defined reserved characters or whitespace. +- <keystr> - String excluding any above defined reserved characters or whitespace. +- <valstr> - String. Mandatory fully standardised keys --------------------------------- -- drm-driver: <str> +- drm-driver: <valstr> String shall contain the name this driver registered as via the respective `struct drm_driver` data structure. @@ -52,6 +53,9 @@ String shall contain the name this driver registered as via the respective Optional fully standardised keys -------------------------------- +Identification +^^^^^^^^^^^^^^ + - drm-pdev: <aaaa:bb.cc.d> For PCI devices this should contain the PCI slot address of the device in @@ -69,10 +73,13 @@ scope of each device, in which case `drm-pdev` shall be present as well. Userspace should make sure to not double account any usage statistics by using the above described criteria in order to associate data to individual clients. -- drm-engine-<str>: <uint> ns +Utilization +^^^^^^^^^^^ + +- drm-engine-<keystr>: <uint> ns GPUs usually contain multiple execution engines. Each shall be given a stable -and unique name (str), with possible values documented in the driver specific +and unique name (keystr), with possible values documented in the driver specific documentation. Value shall be in specified time units which the respective GPU engine spent @@ -84,31 +91,19 @@ larger value within a reasonable period. Upon observing a value lower than what was previously read, userspace is expected to stay with that larger previous value until a monotonic update is seen. -- drm-engine-capacity-<str>: <uint> +- drm-engine-capacity-<keystr>: <uint> Engine identifier string must be the same as the one specified in the -drm-engine-<str> tag and shall contain a greater than zero number in case the +drm-engine-<keystr> tag and shall contain a greater than zero number in case the exported engine corresponds to a group of identical hardware engines. In the absence of this tag parser shall assume capacity of one. Zero capacity is not allowed. -- drm-memory-<str>: <uint> [KiB|MiB] - -Each possible memory type which can be used to store buffer objects by the -GPU in question shall be given a stable and unique name to be returned as the -string here. - -Value shall reflect the amount of storage currently consumed by the buffer -object belong to this client, in the respective memory region. - -Default unit shall be bytes with optional unit specifiers of 'KiB' or 'MiB' -indicating kibi- or mebi-bytes. - -- drm-cycles-<str> <uint> +- drm-cycles-<keystr>: <uint> Engine identifier string must be the same as the one specified in the -drm-engine-<str> tag and shall contain the number of busy cycles for the given +drm-engine-<keystr> tag and shall contain the number of busy cycles for the given engine. Values are not required to be constantly monotonic if it makes the driver @@ -117,16 +112,60 @@ larger value within a reasonable period. Upon observing a value lower than what was previously read, userspace is expected to stay with that larger previous value until a monotonic update is seen. -- drm-maxfreq-<str> <uint> [Hz|MHz|KHz] +- drm-maxfreq-<keystr>: <uint> [Hz|MHz|KHz] Engine identifier string must be the same as the one specified in the -drm-engine-<str> tag and shall contain the maximum frequency for the given -engine. Taken together with drm-cycles-<str>, this can be used to calculate -percentage utilization of the engine, whereas drm-engine-<str> only reflects +drm-engine-<keystr> tag and shall contain the maximum frequency for the given +engine. Taken together with drm-cycles-<keystr>, this can be used to calculate +percentage utilization of the engine, whereas drm-engine-<keystr> only reflects time active without considering what frequency the engine is operating as a percentage of it's maximum frequency. +Memory +^^^^^^ + +- drm-memory-<region>: <uint> [KiB|MiB] + +Each possible memory type which can be used to store buffer objects by the +GPU in question shall be given a stable and unique name to be returned as the +string here. The name "memory" is reserved to refer to normal system memory. + +Value shall reflect the amount of storage currently consumed by the buffer +objects belong to this client, in the respective memory region. + +Default unit shall be bytes with optional unit specifiers of 'KiB' or 'MiB' +indicating kibi- or mebi-bytes. + +- drm-shared-<region>: <uint> [KiB|MiB] + +The total size of buffers that are shared with another file (ie. have more +than a single handle). + +- drm-total-<region>: <uint> [KiB|MiB] + +The total size of buffers that including shared and private memory. + +- drm-resident-<region>: <uint> [KiB|MiB] + +The total size of buffers that are resident in the specified region. + +- drm-purgeable-<region>: <uint> [KiB|MiB] + +The total size of buffers that are purgeable. + +- drm-active-<region>: <uint> [KiB|MiB] + +The total size of buffers that are active on one or more engines. + +Implementation Details +====================== + +Drivers should use drm_show_fdinfo() in their `struct file_operations`, and +implement &drm_driver.show_fdinfo if they wish to provide any stats which +are not provided by drm_show_fdinfo(). But even driver specific stats should +be documented above and where possible, aligned with other drivers. + Driver specific implementations -=============================== +------------------------------- :ref:`i915-usage-stats` diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst index 476719771eef..e4f7b005138d 100644 --- a/Documentation/gpu/rfc/index.rst +++ b/Documentation/gpu/rfc/index.rst @@ -31,3 +31,7 @@ host such documentation: .. toctree:: i915_vm_bind.rst + +.. toctree:: + + xe.rst diff --git a/Documentation/gpu/rfc/xe.rst b/Documentation/gpu/rfc/xe.rst new file mode 100644 index 000000000000..2516fe141db6 --- /dev/null +++ b/Documentation/gpu/rfc/xe.rst @@ -0,0 +1,235 @@ +========================== +Xe – Merge Acceptance Plan +========================== +Xe is a new driver for Intel GPUs that supports both integrated and +discrete platforms starting with Tiger Lake (first Intel Xe Architecture). + +This document aims to establish a merge plan for the Xe, by writing down clear +pre-merge goals, in order to avoid unnecessary delays. + +Xe – Overview +============= +The main motivation of Xe is to have a fresh base to work from that is +unencumbered by older platforms, whilst also taking the opportunity to +rearchitect our driver to increase sharing across the drm subsystem, both +leveraging and allowing us to contribute more towards other shared components +like TTM and drm/scheduler. + +This is also an opportunity to start from the beginning with a clean uAPI that is +extensible by design and already aligned with the modern userspace needs. For +this reason, the memory model is solely based on GPU Virtual Address space +bind/unbind (‘VM_BIND’) of GEM buffer objects (BOs) and execution only supporting +explicit synchronization. With persistent mapping across the execution, the +userspace does not need to provide a list of all required mappings during each +submission. + +The new driver leverages a lot from i915. As for display, the intent is to share +the display code with the i915 driver so that there is maximum reuse there. + +As for the power management area, the goal is to have a much-simplified support +for the system suspend states (S-states), PCI device suspend states (D-states), +GPU/Render suspend states (R-states) and frequency management. It should leverage +as much as possible all the existent PCI-subsystem infrastructure (pm and +runtime_pm) and underlying firmware components such PCODE and GuC for the power +states and frequency decisions. + +Repository: + +https://gitlab.freedesktop.org/drm/xe/kernel (branch drm-xe-next) + +Xe – Platforms +============== +Currently, Xe is already functional and has experimental support for multiple +platforms starting from Tiger Lake, with initial support in userspace implemented +in Mesa (for Iris and Anv, our OpenGL and Vulkan drivers), as well as in NEO +(for OpenCL and Level0). + +During a transition period, platforms will be supported by both Xe and i915. +However, the force_probe mechanism existent in both drivers will allow only one +official and by-default probe at a given time. + +For instance, in order to probe a DG2 which PCI ID is 0x5690 by Xe instead of +i915, the following set of parameters need to be used: + +``` +i915.force_probe=!5690 xe.force_probe=5690 +``` + +In both drivers, the ‘.require_force_probe’ protection forces the user to use the +force_probe parameter while the driver is under development. This protection is +only removed when the support for the platform and the uAPI are stable. Stability +which needs to be demonstrated by CI results. + +In order to avoid user space regressions, i915 will continue to support all the +current platforms that are already out of this protection. Xe support will be +forever experimental and dependent on the usage of force_probe for these +platforms. + +When the time comes for Xe, the protection will be lifted on Xe and kept in i915. + +Xe driver will be protected with both STAGING Kconfig and force_probe. Changes in +the uAPI are expected while the driver is behind these protections. STAGING will +be removed when the driver uAPI gets to a mature state where we can guarantee the +‘no regression’ rule. Then force_probe will be lifted only for future platforms +that will be productized with Xe driver, but not with i915. + +Xe – Pre-Merge Goals +==================== + +Drm_scheduler +------------- +Xe primarily uses Firmware based scheduling (GuC FW). However, it will use +drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to +resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is +not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and +drm_sched_entity. + +Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but +some consensus needs to be reached between Xe and other community drivers that +could also benefit from this work, for coupling FW based/assisted submission such +as the ARM’s new Mali GPU driver, and others. + +As a key measurable result, the patch series introducing Xe itself shall not +depend on any other patch touching drm_scheduler itself that was not yet merged +through drm-misc. This, by itself, already includes the reach of an agreement for +uniform 1 to 1 relationship implementation / usage across drivers. + +GPU VA +------ +Two main goals of Xe are meeting together here: + +1) Have an uAPI that aligns with modern UMD needs. + +2) Early upstream engagement. + +RedHat engineers working on Nouveau proposed a new DRM feature to handle keeping +track of GPU virtual address mappings. This is still not merged upstream, but +this aligns very well with our goals and with our VM_BIND. The engagement with +upstream and the port of Xe towards GPUVA is already ongoing. + +As a key measurable result, Xe needs to be aligned with the GPU VA and working in +our tree. Missing Nouveau patches should *not* block Xe and any needed GPUVA +related patch should be independent and present on dri-devel or acked by +maintainers to go along with the first Xe pull request towards drm-next. + +DRM_VM_BIND +----------- +Nouveau, and Xe are all implementing ‘VM_BIND’ and new ‘Exec’ uAPIs in order to +fulfill the needs of the modern uAPI. Xe merge should *not* be blocked on the +development of a common new drm_infrastructure. However, the Xe team needs to +engage with the community to explore the options of a common API. + +As a key measurable result, the DRM_VM_BIND needs to be documented in this file +below, or this entire block deleted if the consensus is for independent drivers +vm_bind ioctls. + +Although having a common DRM level IOCTL for VM_BIND is not a requirement to get +Xe merged, it is mandatory to enforce the overall locking scheme for all major +structs and list (so vm and vma). So, a consensus is needed, and possibly some +common helpers. If helpers are needed, they should be also documented in this +document. + +ASYNC VM_BIND +------------- +Although having a common DRM level IOCTL for VM_BIND is not a requirement to get +Xe merged, it is mandatory to have a consensus with other drivers and Mesa. +It needs to be clear how to handle async VM_BIND and interactions with userspace +memory fences. Ideally with helper support so people don't get it wrong in all +possible ways. + +As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of +various flavors, error handling and a sample API should be documented here or in +a separate document pointed to by this document. + +Userptr integration and vm_bind +------------------------------- +Different drivers implement different ways of dealing with execution of userptr. +With multiple drivers currently introducing support to VM_BIND, the goal is to +aim for a DRM consensus on what’s the best way to have that support. To some +extent this is already getting addressed itself with the GPUVA where likely the +userptr will be a GPUVA with a NULL GEM call VM bind directly on the userptr. +However, there are more aspects around the rules for that and the usage of +mmu_notifiers, locking and other aspects. + +This task here has the goal of introducing a documentation of the basic rules. + +The documentation *needs* to first live in this document (API session below) and +then moved to another more specific document or at Xe level or at DRM level. + +Documentation should include: + + * The userptr part of the VM_BIND api. + + * Locking, including the page-faulting case. + + * O(1) complexity under VM_BIND. + +Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when +the second driver supporting VM_BIND+userptr appears. Details to be defined when +the time comes. + +Long running compute: minimal data structure/scaffolding +-------------------------------------------------------- +The generic scheduler code needs to include the handling of endless compute +contexts, with the minimal scaffolding for preempt-ctx fences (probably on the +drm_sched_entity) and making sure drm_scheduler can cope with the lack of job +completion fence. + +The goal is to achieve a consensus ahead of Xe initial pull-request, ideally with +this minimal drm/scheduler work, if needed, merged to drm-misc in a way that any +drm driver, including Xe, could re-use and add their own individual needs on top +in a next stage. However, this should not block the initial merge. + +This is a non-blocker item since the driver without the support for the long +running compute enabled is not a showstopper. + +Display integration with i915 +----------------------------- +In order to share the display code with the i915 driver so that there is maximum +reuse, the i915/display/ code is built twice, once for i915.ko and then for +xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs' +depending on the build target. The goal is to refactor both Xe and i915/display +code simultaneously in order to get a clean result before they land upstream, so +that display can already be part of the initial pull request towards drm-next. + +However, display code should not gate the acceptance of Xe in upstream. Xe +patches will be refactored in a way that display code can be removed, if needed, +from the first pull request of Xe towards drm-next. The expectation is that when +both drivers are part of the drm-tip, the introduction of cleaner patches will be +easier and speed up. + +Drm_exec +-------- +Helper to make dma_resv locking for a big number of buffers is getting removed in +the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/ +If that happens, Xe needs to change and incorporate the changes in the driver. +The goal is to engage with the Community to understand if the best approach is to +move that to the drivers that are using it or if we should keep the helpers in +place waiting for Xe to get merged. + +This item ties into the GPUVA, VM_BIND, and even long-running compute support. + +As a key measurable result, we need to have a community consensus documented in +this document and the Xe driver prepared for the changes, if necessary. + +Dev_coredump +------------ + +Xe needs to align with other drivers on the way that the error states are +dumped, avoiding a Xe only error_state solution. The goal is to use devcoredump +infrastructure to report error states, since it produces a standardized way +by exposing a virtual and temporary /sys/class/devcoredump device. + +As the key measurable result, Xe driver needs to provide GPU snapshots captured +at hang time through devcoredump, but without depending on any core modification +of devcoredump infrastructure itself. + +Later, when we are in-tree, the goal is to collaborate with devcoredump +infrastructure with overall possible improvements, like multiple file support +for better organization of the dumps, snapshot support, dmesg extra print, +and whatever may make sense and help the overall infrastructure. + +Xe – uAPI high level overview +============================= + +...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached. diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 1f8a5ebe188e..68bdafa0284f 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -276,11 +276,8 @@ Various hold-ups: - Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb setup code can't be deleted. -- Many drivers wrap drm_gem_fb_create() only to check for valid formats. For - atomic drivers we could check for valid formats by calling - drm_plane_check_pixel_format() against all planes, and pass if any plane - supports the format. For non-atomic that's not possible since like the format - list for the primary plane is fake and we'd therefor reject valid formats. +- Need to switch to drm_gem_fb_create(), as now drm_gem_fb_create() checks for + valid formats for atomic drivers. - Many drivers subclass drm_framebuffer, we'd need a embedding compatible version of the varios drm_gem_fb_create functions. Maybe called diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 49db221c0f52..ba04ac7c2167 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -118,14 +118,9 @@ Add Plane Features There's lots of plane features we could add support for: -- ARGB format on primary plane: blend the primary plane into background with - translucent alpha. - - Add background color KMS property[Good to get started]. -- Full alpha blending on all planes. - -- Rotation, scaling. +- Scaling. - Additional buffer formats, especially YUV formats for video like NV12. Low/high bpp RGB formats would also be interesting. diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst index 4e198c5eb683..213644b4ecba 100644 --- a/Documentation/hwmon/aht10.rst +++ b/Documentation/hwmon/aht10.rst @@ -5,32 +5,42 @@ Kernel driver aht10 Supported chips: - * Aosong AHT10 + * Aosong AHT10/AHT20 Prefix: 'aht10' Addresses scanned: None - Datasheet: + Datasheet(AHT10): Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf + Datasheet(AHT20): + + English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf + Author: Johannes Cornelis Draaijer <jcdra1@gmail.com> Description ----------- -The AHT10 is a Temperature and Humidity sensor +The AHT10/AHT20 is a Temperature and Humidity sensor The address of this i2c device may only be 0x38 +Special Features +---------------- + +AHT20 has additional CRC8 support which is sent as the last byte of the sensor +values. + Usage Notes ----------- -This driver does not probe for AHT10 devices, as there is no reliable -way to determine if an i2c chip is or isn't an AHT10. The device has +This driver does not probe for AHT10/ATH20 devices, as there is no reliable +way to determine if an i2c chip is or isn't an AHT10/AHT20. The device has to be instantiated explicitly with the address 0x38. See Documentation/i2c/instantiating-devices.rst for details. diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 14b37851af0c..94dc2d93d180 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -12,6 +12,7 @@ Supported devices: * Aquacomputer Octo fan controller * Aquacomputer Quadro fan controller * Aquacomputer High Flow Next sensor +* Aquacomputer Leakshield leak prevention system * Aquacomputer Aquastream XT watercooling pump * Aquacomputer Aquastream Ultimate watercooling pump * Aquacomputer Poweradjust 3 fan controller @@ -57,6 +58,11 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re A temperature sensor can be connected to it, in which case it provides its reading and an estimation of the dissipated/absorbed power in the liquid cooling loop. +The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and +target readings). It also exposes the estimated reservoir volume and how much of it is +filled with coolant. Pump RPM and flow can be set to enhance on-device calculations, +but this is not yet implemented here. + The Aquastream XT pump exposes temperature readings for the coolant, external sensor and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump current. @@ -83,6 +89,9 @@ Sysfs entries temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius) temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius) fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) +fan1_min Minimal fan speed (in RPM) +fan1_max Maximal fan speed (in RPM) +fan1_target Target fan speed (in RPM) fan5_pulses Quadro flow sensor pulses power[1-8]_input Pump/fan power (in micro Watts) in[0-7]_input Pump/fan voltage (in milli Volts) diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index c92c1d3839e4..7e3cd5b6686f 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -14,6 +14,7 @@ Supported boards: * ROG CROSSHAIR VIII FORMULA * ROG CROSSHAIR VIII HERO * ROG CROSSHAIR VIII IMPACT + * ROG CROSSHAIR X670E HERO * ROG MAXIMUS XI HERO * ROG MAXIMUS XI HERO (WI-FI) * ROG STRIX B550-E GAMING diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst index c389bd21f4f2..16db34d464dd 100644 --- a/Documentation/hwmon/corsair-psu.rst +++ b/Documentation/hwmon/corsair-psu.rst @@ -15,11 +15,11 @@ Supported devices: Corsair HX850i - Corsair HX1000i (revision 1 and 2) + Corsair HX1000i (Series 2022 and 2023) Corsair HX1200i - Corsair HX1500i + Corsair HX1500i (Series 2022 and 2023) Corsair RM550i @@ -69,6 +69,8 @@ power1_input Total power usage power2_input Power usage of the 12v psu rail power3_input Power usage of the 5v psu rail power4_input Power usage of the 3.3v psu rail +pwm1 PWM value, read only +pwm1_enable PWM mode, read only temp1_input Temperature of the psu vrm component temp1_crit Temperature max cirtical value of the psu vrm component temp2_input Temperature of the psu case @@ -78,11 +80,14 @@ temp2_crit Temperature max critical value of psu case Usage Notes ----------- -It is an USB HID device, so it is auto-detected and supports hot-swapping. +It is an USB HID device, so it is auto-detected, supports hot-swapping and +several devices at once. Flickering values in the rail voltage levels can be an indicator for a failing -PSU. The driver also provides some additional useful values via debugfs, which -do not fit into the hwmon class. +PSU. Accordingly to the default automatic fan speed plan the fan starts at about +30% of the wattage rating. If this does not happen, a fan failure is likely. The +driver also provides some additional useful values via debugfs, which do not fit +into the hwmon class. Debugfs entries --------------- diff --git a/Documentation/hwmon/hp-wmi-sensors.rst b/Documentation/hwmon/hp-wmi-sensors.rst new file mode 100644 index 000000000000..a6bca9aecdde --- /dev/null +++ b/Documentation/hwmon/hp-wmi-sensors.rst @@ -0,0 +1,140 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +.. include:: <isonum.txt> + +=========================== +Linux HP WMI Sensors Driver +=========================== + +:Copyright: |copy| 2023 James Seo <james@equiv.tech> + +Description +=========== + +Hewlett-Packard (and some HP Compaq) business-class computers report hardware +monitoring information via Windows Management Instrumentation (WMI). +This driver exposes that information to the Linux hwmon subsystem, allowing +userspace utilities like ``sensors`` to gather numeric sensor readings. + +sysfs interface +=============== + +When the driver is loaded, it discovers the sensors available on the +system and creates the following sysfs attributes as necessary within +``/sys/class/hwmon/hwmon[X]``: + +(``[X]`` is some number that depends on other system components.) + +======================= ======= =================================== +Name Perm Description +======================= ======= =================================== +``curr[X]_input`` RO Current in milliamperes (mA). +``curr[X]_label`` RO Current sensor label. +``fan[X]_input`` RO Fan speed in RPM. +``fan[X]_label`` RO Fan sensor label. +``fan[X]_fault`` RO Fan sensor fault indicator. +``fan[X]_alarm`` RO Fan sensor alarm indicator. +``in[X]_input`` RO Voltage in millivolts (mV). +``in[X]_label`` RO Voltage sensor label. +``temp[X]_input`` RO Temperature in millidegrees Celsius + (m\ |deg|\ C). +``temp[X]_label`` RO Temperature sensor label. +``temp[X]_fault`` RO Temperature sensor fault indicator. +``temp[X]_alarm`` RO Temperature sensor alarm indicator. +``intrusion[X]_alarm`` RW Chassis intrusion alarm indicator. +======================= ======= =================================== + +``fault`` attributes + Reading ``1`` instead of ``0`` as the ``fault`` attribute for a sensor + indicates that it has encountered some issue during operation such that + measurements from it should not be trusted. If a sensor with the fault + condition recovers later, reading this attribute will return ``0`` again. + +``alarm`` attributes + Reading ``1`` instead of ``0`` as the ``alarm`` attribute for a sensor + indicates that one of the following has occurred, depending on its type: + + - ``fan``: The fan has stalled or has been disconnected while running. + - ``temp``: The sensor reading has reached a critical threshold. + The exact threshold is system-dependent. + - ``intrusion``: The system's chassis has been opened. + + After ``1`` is read from an ``alarm`` attribute, the attribute resets itself + and returns ``0`` on subsequent reads. As an exception, an + ``intrusion[X]_alarm`` can only be manually reset by writing ``0`` to it. + +debugfs interface +================= + +.. warning:: The debugfs interface is subject to change without notice + and is only available when the kernel is compiled with + ``CONFIG_DEBUG_FS`` defined. + +The standard hwmon interface in sysfs exposes sensors of several common types +that are connected as of driver initialization. However, there are usually +other sensors in WMI that do not meet these criteria. In addition, a number of +system-dependent "platform events objects" used for ``alarm`` attributes may +be present. A debugfs interface is therefore provided for read-only access to +all available HP WMI sensors and platform events objects. + +``/sys/kernel/debug/hp-wmi-sensors-[X]/sensor`` +contains one numbered entry per sensor with the following attributes: + +=============================== ======================================= +Name Example +=============================== ======================================= +``name`` ``CPU0 Fan`` +``description`` ``Reports CPU0 fan speed`` +``sensor_type`` ``12`` +``other_sensor_type`` (an empty string) +``operational_status`` ``2`` +``possible_states`` ``Normal,Caution,Critical,Not Present`` +``current_state`` ``Normal`` +``base_units`` ``19`` +``unit_modifier`` ``0`` +``current_reading`` ``1008`` +``rate_units`` ``0`` (only exists on some systems) +=============================== ======================================= + +If platform events objects are available, +``/sys/kernel/debug/hp-wmi-sensors-[X]/platform_events`` +contains one numbered entry per object with the following attributes: + +=============================== ==================== +Name Example +=============================== ==================== +``name`` ``CPU0 Fan Stall`` +``description`` ``CPU0 Fan Speed`` +``source_namespace`` ``root\wmi`` +``source_class`` ``HPBIOS_BIOSEvent`` +``category`` ``3`` +``possible_severity`` ``25`` +``possible_status`` ``5`` +=============================== ==================== + +These represent the properties of the underlying ``HPBIOS_BIOSNumericSensor`` +and ``HPBIOS_PlatformEvents`` WMI objects, which vary between systems. +See [#]_ for more details and Managed Object Format (MOF) definitions. + +Known issues and limitations +============================ + +- If the existing hp-wmi driver for non-business-class HP systems is already + loaded, ``alarm`` attributes will be unavailable even on systems that + support them. This is because the same WMI event GUID used by this driver + for ``alarm`` attributes is used on those systems for e.g. laptop hotkeys. +- Dubious sensor hardware and inconsistent BIOS WMI implementations have been + observed to cause inaccurate readings and peculiar behavior, such as alarms + failing to occur or occurring only once per boot. +- Only temperature, fan speed, and intrusion sensor types have been seen in + the wild so far. Support for voltage and current sensors is therefore + provisional. +- Although HP WMI sensors may claim to be of any type, any oddball sensor + types unknown to hwmon will not be supported. + +References +========== + +.. [#] Hewlett-Packard Development Company, L.P., + "HP Client Management Interface Technical White Paper", 2005. [Online]. + Available: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst index c2d1e0299d8d..6cacf7daf25c 100644 --- a/Documentation/hwmon/hwmon-kernel-api.rst +++ b/Documentation/hwmon/hwmon-kernel-api.rst @@ -66,7 +66,7 @@ hwmon_device_register_with_info. devm_hwmon_device_unregister does not normally have to be called. It is only needed for error handling, and only needed if the driver probe fails after -the call to hwmon_device_register_with_info and if the automatic (device +the call to devm_hwmon_device_register_with_info and if the automatic (device managed) removal would be too late. All supported hwmon device registration functions only accept valid device diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index fa1208c62855..042e1cf9501b 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -9,7 +9,6 @@ Hardware Monitoring hwmon-kernel-api pmbus-core - inspur-ipsps1 submitting-patches sysfs-interface userspace-tools @@ -78,6 +77,7 @@ Hardware Monitoring Kernel Drivers gl518sm gxp-fan-ctrl hih6130 + hp-wmi-sensors ibmaem ibm-cffps ibmpowernv @@ -85,6 +85,7 @@ Hardware Monitoring Kernel Drivers ina2xx ina238 ina3221 + inspur-ipsps1 intel-m10-bmc-hwmon ir35221 ir38064 @@ -140,6 +141,7 @@ Hardware Monitoring Kernel Drivers max31760 max31785 max31790 + max31827 max34440 max6620 max6639 diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst new file mode 100644 index 000000000000..b0971d05b8a4 --- /dev/null +++ b/Documentation/hwmon/max31827.rst @@ -0,0 +1,90 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max31827 +====================== + +Supported chips: + + * Maxim MAX31827 + + Prefix: 'max31827' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + * Maxim MAX31828 + + Prefix: 'max31828' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + * Maxim MAX31829 + + Prefix: 'max31829' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + +Authors: + - Daniel Matyas <daniel.matyas@analog.com> + +Description +----------- + +The chips supported by this driver are quite similar. The only difference +between them is found in the default power-on behaviour of the chips. While the +MAX31827's fault queue is set to 1, the other two chip's fault queue is set to +4. Besides this, the MAX31829's alarm active state is high, while the other two +chip's alarms are active on low. It is important to note that the chips can be +configured to operate in the same manner with 1 write operation to the +configuration register. From here on, we will refer to all these chips as +MAX31827. + +MAX31827 implements a temperature sensor with a 6 WLP packaging scheme. This +sensor measures the temperature of the chip itself. + +MAX31827 has low and over temperature alarms with an effective value and a +hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and ++90 degrees for over temperature alarm. + +The alarm can be configured in comparator and interrupt mode. Currently only +comparator mode is implemented. In Comparator mode, the OT/UT status bits have a +value of 1 when the temperature rises above the TH value or falls below TL, +which is also subject to the Fault Queue selection. OT status returns to 0 when +the temperature drops below the TH_HYST value or when shutdown mode is entered. +Similarly, UT status returns to 0 when the temperature rises above TL_HYST value +or when shutdown mode is entered. + +Putting the MAX31827 into shutdown mode also resets the OT/UT status bits. Note +that if the mode is changed while OT/UT status bits are set, an OT/UT status +reset may be required before it begins to behave normally. To prevent this, +it is recommended to perform a read of the configuration/status register to +clear the status bits before changing the operating mode. + +The conversions can be manual with the one-shot functionality and automatic with +a set frequency. When powered on, the chip measures temperatures with 1 conv/s. +Enabling the device when it is already enabled has the side effect of setting +the conversion frequency to 1 conv/s. The conversion time varies depending on +the resolution. The conversion time doubles with every bit of increased +resolution. For 10 bit resolution 35ms are needed, while for 12 bit resolution +(default) 140ms. When chip is in shutdown mode and a read operation is +requested, one-shot is triggered, the device waits for 140 (conversion time) + 1 +(error) ms, and only after that is the temperature value register read. + +The LSB of the temperature values is 0.0625 degrees Celsius, but the values of +the temperatures are displayed in milli-degrees. This means, that some data is +lost. The step between 2 consecutive values is 62 or 63. This effect can be seen +in the writing of alarm values too. For positive numbers the user-input value +will always be rounded down to the nearest possible value, for negative numbers +the user-input will always be rounded up to the nearest possible value. + +Notes +----- + +Currently fault queue, alarm polarity and resolution cannot be modified. +PEC is not implemented either. diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst index 566a8d5bde08..3adeb7406243 100644 --- a/Documentation/hwmon/oxp-sensors.rst +++ b/Documentation/hwmon/oxp-sensors.rst @@ -19,18 +19,32 @@ out the EC registers and values to write to since the EC layout and model is different. Aya Neo devices preceding the AIR may not be supportable as the EC model is different and do not appear to have manual control capabilities. +Some models have a toggle for changing the behaviour of the "Turbo/Silent" +button of the device. It will change the key event that it triggers with +a flip of the `tt_toggle` attribute. See below for boards that support this +function. + Supported devices ----------------- Currently the driver supports the following handhelds: - AOK ZOE A1 + - AOK ZOE A1 PRO + - Aya Neo 2 - Aya Neo AIR - Aya Neo AIR Pro + - Aya Neo Geek - OneXPlayer AMD - OneXPlayer mini AMD - OneXPlayer mini AMD PRO +"Turbo/Silent" button behaviour toggle is only supported on: + - AOK ZOE A1 + - AOK ZOE A1 PRO + - OneXPlayer mini AMD (only with updated alpha BIOS) + - OneXPlayer mini AMD PRO + Sysfs entries ------------- @@ -47,3 +61,10 @@ pwm1 Read Write. Read this attribute to see current duty cycle in the range [0-255]. When pwm1_enable is set to "1" (manual) write any value in the range [0-255] to set fan speed. + +tt_toggle + Read Write. Read this attribute to check the status of the turbo/silent + button behaviour function. Write "1" to activate the switch and "0" to + deactivate it. The specific keycodes and behaviour is specific to the device + both with this function on and off. This attribute is attached to the platform + driver and not to the hwmon driver (/sys/devices/platform/oxp-platform/tt_toggle) diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst index 95a850d5b2c1..87864ffd1777 100644 --- a/Documentation/hwmon/sht3x.rst +++ b/Documentation/hwmon/sht3x.rst @@ -28,15 +28,8 @@ The device communicates with the I2C protocol. Sensors can have the I2C addresses 0x44 or 0x45, depending on the wiring. See Documentation/i2c/instantiating-devices.rst for methods to instantiate the device. -There are two options configurable by means of sht3x_platform_data: - -1. blocking (pull the I2C clock line down while performing the measurement) or - non-blocking mode. Blocking mode will guarantee the fastest result but - the I2C bus will be busy during that time. By default, non-blocking mode - is used. Make sure clock-stretching works properly on your device if you - want to use blocking mode. -2. high or low accuracy. High accuracy is used by default and using it is - strongly recommended. +Even if sht3x sensor supports clock-strech(blocking mode) and non-strench +(non-blocking mode) in single-shot mode, this driver only supports the latter. The sht3x sensor supports a single shot mode as well as 5 periodic measure modes, which can be controlled with the update_interval sysfs interface. @@ -85,4 +78,11 @@ heater_enable: heater enable, heating element removes excess humidity from update_interval: update interval, 0 for single shot, interval in msec for periodic measurement. If the interval is not supported by the sensor, the next faster interval is chosen +repeatability: write or read repeatability, higher repeatability means + longer measurement duration, lower noise level and + larger energy consumption: + + - 0: low repeatability + - 1: medium repeatability + - 2: high repeatability =================== ============================================================ diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst index ab9e850e8fe0..e76e68ccf718 100644 --- a/Documentation/i2c/busses/i2c-i801.rst +++ b/Documentation/i2c/busses/i2c-i801.rst @@ -46,7 +46,7 @@ Supported adapters: * Intel Emmitsburg (PCH) * Intel Alder Lake (PCH) * Intel Raptor Lake (PCH) - * Intel Meteor Lake (SOC) + * Intel Meteor Lake (SOC and PCH) Datasheets: Publicly available at the Intel website diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst index 173c2acda9fd..a480bc781565 100644 --- a/Documentation/input/devices/xpad.rst +++ b/Documentation/input/devices/xpad.rst @@ -4,16 +4,16 @@ xpad - Linux USB driver for Xbox compatible controllers This driver exposes all first-party and third-party Xbox compatible controllers. It has a long history and has enjoyed considerable usage -as Window's xinput library caused most PC games to focus on Xbox +as Windows' xinput library caused most PC games to focus on Xbox controller compatibility. Due to backwards compatibility all buttons are reported as digital. -This only effects Original Xbox controllers. All later controller models +This only affects Original Xbox controllers. All later controller models have only digital face buttons. Rumble is supported on some models of Xbox 360 controllers but not of Original Xbox controllers nor on Xbox One controllers. As of writing -the Xbox One's rumble protocol has not been reverse engineered but in +the Xbox One's rumble protocol has not been reverse-engineered but in the future could be supported. @@ -82,7 +82,7 @@ I've tested this with Stepmania, and it works quite well. Unknown Controllers ------------------- -If you have an unknown xbox controller, it should work just fine with +If you have an unknown Xbox controller, it should work just fine with the default settings. HOWEVER if you have an unknown dance pad not listed below, it will not @@ -123,7 +123,7 @@ can be found on the net ([1]_, [2]_, [3]_). Thanks to the trip splitter found on the cable you don't even need to cut the original one. You can buy an extension cable and cut that instead. That way, -you can still use the controller with your X-Box, if you have one ;) +you can still use the controller with your Xbox, if you have one ;) diff --git a/Documentation/input/gamepad.rst b/Documentation/input/gamepad.rst index 71019de46036..eca17a7f5258 100644 --- a/Documentation/input/gamepad.rst +++ b/Documentation/input/gamepad.rst @@ -184,7 +184,7 @@ Gamepads report the following events: Many pads also have a third button which is branded or has a special symbol and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo - "HOME" button, the XBox "X"-button or Sony "PS" button. + "HOME" button, the Xbox "X" button or the Sony PlayStation "PS" button. - Rumble: diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst index 2a22ddb1b848..bd906407e307 100644 --- a/Documentation/kbuild/kbuild.rst +++ b/Documentation/kbuild/kbuild.rst @@ -150,6 +150,12 @@ the UTS_MACHINE variable, and on some architectures also the kernel config. The value of KBUILD_DEBARCH is assumed (not checked) to be a valid Debian architecture. +KDOCFLAGS +--------- +Specify extra (warning/error) flags for kernel-doc checks during the build, +see scripts/kernel-doc for which flags are supported. Note that this doesn't +(currently) apply to documentation builds. + ARCH ---- Set ARCH to the architecture to be built. diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst index ce57254cb871..3ade16c18328 100644 --- a/Documentation/leds/index.rst +++ b/Documentation/leds/index.rst @@ -17,6 +17,7 @@ LEDs uleds leds-blinkm + leds-cht-wcove leds-el15203000 leds-lm3556 leds-lp3944 diff --git a/Documentation/leds/leds-cht-wcove.rst b/Documentation/leds/leds-cht-wcove.rst new file mode 100644 index 000000000000..5ec7cb60c4aa --- /dev/null +++ b/Documentation/leds/leds-cht-wcove.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================================== +Kernel driver for Intel Cherry Trail Whiskey Cove PMIC LEDs +=========================================================== + +/sys/class/leds/<led>/hw_pattern +-------------------------------- + +Specify a hardware pattern for the Whiskey Cove PMIC LEDs. + +The only supported pattern is hardware breathing mode:: + + "0 2000 1 2000" + + ^ + | + Max-| --- + | / \ + | / \ + | / \ / + | / \ / + Min-|- --- + | + 0------2------4--> time (sec) + +The rise and fall times must be the same value. +Supported values are 2000, 1000, 500 and 250 for +breathing frequencies of 1/4, 1/2, 1 and 2 Hz. + +The set pattern only controls the timing. For max brightness the last +set brightness is used and the max brightness can be changed +while breathing by writing the brightness attribute. + +This is just like how blinking works in the LED subsystem, +for both sw and hw blinking the brightness can also be changed +while blinking. Breathing on this hw really is just a variant +mode of blinking. diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst index cd155ead8703..5db620ed27aa 100644 --- a/Documentation/leds/leds-class.rst +++ b/Documentation/leds/leds-class.rst @@ -169,6 +169,87 @@ Setting the brightness to zero with brightness_set() callback function should completely turn off the LED and cancel the previously programmed hardware blinking function, if any. +Hardware driven LEDs +==================== + +Some LEDs can be programmed to be driven by hardware. This is not +limited to blink but also to turn off or on autonomously. +To support this feature, a LED needs to implement various additional +ops and needs to declare specific support for the supported triggers. + +With hw control we refer to the LED driven by hardware. + +LED driver must define the following value to support hw control: + + - hw_control_trigger: + unique trigger name supported by the LED in hw control + mode. + +LED driver must implement the following API to support hw control: + - hw_control_is_supported: + check if the flags passed by the supported trigger can + be parsed and activate hw control on the LED. + + Return 0 if the passed flags mask is supported and + can be set with hw_control_set(). + + If the passed flags mask is not supported -EOPNOTSUPP + must be returned, the LED trigger will use software + fallback in this case. + + Return a negative error in case of any other error like + device not ready or timeouts. + + - hw_control_set: + activate hw control. LED driver will use the provided + flags passed from the supported trigger, parse them to + a set of mode and setup the LED to be driven by hardware + following the requested modes. + + Set LED_OFF via the brightness_set to deactivate hw control. + + Return 0 on success, a negative error number on failing to + apply flags. + + - hw_control_get: + get active modes from a LED already in hw control, parse + them and set in flags the current active flags for the + supported trigger. + + Return 0 on success, a negative error number on failing + parsing the initial mode. + Error from this function is NOT FATAL as the device may + be in a not supported initial state by the attached LED + trigger. + + - hw_control_get_device: + return the device associated with the LED driver in + hw control. A trigger might use this to match the + returned device from this function with a configured + device for the trigger as the source for blinking + events and correctly enable hw control. + (example a netdev trigger configured to blink for a + particular dev match the returned dev from get_device + to set hw control) + + Returns a pointer to a struct device or NULL if nothing + is currently attached. + +LED driver can activate additional modes by default to workaround the +impossibility of supporting each different mode on the supported trigger. +Examples are hardcoding the blink speed to a set interval, enable special +feature like bypassing blink if some requirements are not met. + +A trigger should first check if the hw control API are supported by the LED +driver and check if the trigger is supported to verify if hw control is possible, +use hw_control_is_supported to check if the flags are supported and only at +the end use hw_control_set to activate hw control. + +A trigger can use hw_control_get to check if a LED is already in hw control +and init their flags. + +When the LED is in hw control, no software blink is possible and doing so +will effectively disable hw control. Known Issues ============ diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt index e9c30dc75884..67b44704801f 100644 --- a/Documentation/leds/well-known-leds.txt +++ b/Documentation/leds/well-known-leds.txt @@ -58,6 +58,7 @@ LEDs on notebook body, indicating that sound input / output is muted. * System notification +Good: "rgb:status" Legacy: "status-led:{red,green,blue}" (Motorola Droid 4) Legacy: "lp5523:{r,g,b}" (Nokia N900) @@ -65,7 +66,7 @@ Phones usually have multi-color status LED. * Power management -Good: "platform:*:charging" (allwinner sun50i) +Good: "platform:*:charging" (allwinner sun50i, leds-cht-wcove) * Screen diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst index 7003bd5aeff4..6a9ea96c8bcb 100644 --- a/Documentation/locking/index.rst +++ b/Documentation/locking/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ======= -locking +Locking ======= .. toctree:: diff --git a/Documentation/maintainer/configure-git.rst b/Documentation/maintainer/configure-git.rst index 80ae5030a590..ec0ddfb9cdd3 100644 --- a/Documentation/maintainer/configure-git.rst +++ b/Documentation/maintainer/configure-git.rst @@ -56,7 +56,7 @@ by adding the following hook into your git: $ cat >.git/hooks/applypatch-msg <<'EOF' #!/bin/sh . git-sh-setup - perl -pi -e 's|^Message-Id:\s*<?([^>]+)>?$|Link: https://lore.kernel.org/r/$1|g;' "$1" + perl -pi -e 's|^Message-I[dD]:\s*<?([^>]+)>?$|Link: https://lore.kernel.org/r/$1|g;' "$1" test -x "$GIT_DIR/hooks/commit-msg" && exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} : diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index 756be15a49a4..ecc40fbbcfb8 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -28,5 +28,6 @@ fit into other categories. oxsemi-tornado pci-endpoint-test spear-pcie-gadget + tps6594-pfsm uacce xilinx_sdfec diff --git a/Documentation/misc-devices/tps6594-pfsm.rst b/Documentation/misc-devices/tps6594-pfsm.rst new file mode 100644 index 000000000000..4ada37ccdcba --- /dev/null +++ b/Documentation/misc-devices/tps6594-pfsm.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================== +Texas Instruments TPS6594 PFSM driver +===================================== + +Author: Julien Panis (jpanis@baylibre.com) + +Overview +======== + +Strictly speaking, PFSM (Pre-configurable Finite State Machine) is not +hardware. It is a piece of code. + +The TPS6594 PMIC (Power Management IC) integrates a state machine which +manages operational modes. Depending on the current operational mode, +some voltage domains remain energized while others can be off. + +The PFSM driver can be used to trigger transitions between configured +states. It also provides R/W access to the device registers. + +Supported chips +--------------- + +- tps6594-q1 +- tps6593-q1 +- lp8764-q1 + +Driver location +=============== + +drivers/misc/tps6594-pfsm.c + +Driver type definitions +======================= + +include/uapi/linux/tps6594_pfsm.h + +Driver IOCTLs +============= + +:c:macro::`PMIC_GOTO_STANDBY` +All device resources are powered down. The processor is off, and +no voltage domains are energized. + +:c:macro::`PMIC_GOTO_LP_STANDBY` +The digital and analog functions of the PMIC, which are not +required to be always-on, are turned off (low-power). + +:c:macro::`PMIC_UPDATE_PGM` +Triggers a firmware update. + +:c:macro::`PMIC_SET_ACTIVE_STATE` +One of the operational modes. +The PMICs are fully functional and supply power to all PDN loads. +All voltage domains are energized in both MCU and Main processor +sections. + +:c:macro::`PMIC_SET_MCU_ONLY_STATE` +One of the operational modes. +Only the power resources assigned to the MCU Safety Island are on. + +:c:macro::`PMIC_SET_RETENTION_STATE` +One of the operational modes. +Depending on the triggers set, some DDR/GPIO voltage domains can +remain energized, while all other domains are off to minimize +total system power. + +Driver usage +============ + +See available PFSMs:: + + # ls /dev/pfsm* + +Dump the registers of pages 0 and 1:: + + # hexdump -C /dev/pfsm-0-0x48 + +See PFSM events:: + + # cat /proc/interrupts + +Userspace code example +---------------------- + +samples/pfsm/pfsm-wakeup.c diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst index 0cff6fac6b7e..4bfdf1d30c4a 100644 --- a/Documentation/mm/damon/design.rst +++ b/Documentation/mm/damon/design.rst @@ -4,31 +4,55 @@ Design ====== -Configurable Layers -=================== - -DAMON provides data access monitoring functionality while making the accuracy -and the overhead controllable. The fundamental access monitorings require -primitives that dependent on and optimized for the target address space. On -the other hand, the accuracy and overhead tradeoff mechanism, which is the core -of DAMON, is in the pure logic space. DAMON separates the two parts in -different layers and defines its interface to allow various low level -primitives implementations configurable with the core logic. We call the low -level primitives implementations monitoring operations. - -Due to this separated design and the configurable interface, users can extend -DAMON for any address space by configuring the core logics with appropriate -monitoring operations. If appropriate one is not provided, users can implement -the operations on their own. + +Overall Architecture +==================== + +DAMON subsystem is configured with three layers including + +- Operations Set: Implements fundamental operations for DAMON that depends on + the given monitoring target address-space and available set of + software/hardware primitives, +- Core: Implements core logics including monitoring overhead/accurach control + and access-aware system operations on top of the operations set layer, and +- Modules: Implements kernel modules for various purposes that provides + interfaces for the user space, on top of the core layer. + + +Configurable Operations Set +--------------------------- + +For data access monitoring and additional low level work, DAMON needs a set of +implementations for specific operations that are dependent on and optimized for +the given target address space. On the other hand, the accuracy and overhead +tradeoff mechanism, which is the core logic of DAMON, is in the pure logic +space. DAMON separates the two parts in different layers, namely DAMON +Operations Set and DAMON Core Logics Layers, respectively. It further defines +the interface between the layers to allow various operations sets to be +configured with the core logic. + +Due to this design, users can extend DAMON for any address space by configuring +the core logic to use the appropriate operations set. If any appropriate set +is unavailable, users can implement one on their own. For example, physical memory, virtual memory, swap space, those for specific processes, NUMA nodes, files, and backing memory devices would be supportable. -Also, if some architectures or devices support special optimized access check -primitives, those will be easily configurable. +Also, if some architectures or devices supporting special optimized access +check primitives, those will be easily configurable. -Reference Implementations of Address Space Specific Monitoring Operations -========================================================================= +Programmable Modules +-------------------- + +Core layer of DAMON is implemented as a framework, and exposes its application +programming interface to all kernel space components such as subsystems and +modules. For common use cases of DAMON, DAMON subsystem provides kernel +modules that built on top of the core layer using the API, which can be easily +used by the user space end users. + + +Operations Set Layer +==================== The monitoring operations are defined in two parts: @@ -90,8 +114,12 @@ conflict with the reclaim logic using ``PG_idle`` and ``PG_young`` page flags, as Idle page tracking does. -Address Space Independent Core Mechanisms -========================================= +Core Logics +=========== + + +Monitoring +---------- Below four sections describe each of the DAMON core mechanisms and the five monitoring attributes, ``sampling interval``, ``aggregation interval``, @@ -100,7 +128,7 @@ regions``. Access Frequency Monitoring ---------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~ The output of DAMON says what pages are how frequently accessed for a given duration. The resolution of the access frequency is controlled by setting @@ -127,7 +155,7 @@ size of the target workload grows. Region Based Sampling ---------------------- +~~~~~~~~~~~~~~~~~~~~~ To avoid the unbounded increase of the overhead, DAMON groups adjacent pages that assumed to have the same access frequencies into a region. As long as the @@ -144,7 +172,7 @@ assumption is not guaranteed. Adaptive Regions Adjustment ---------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~ Even somehow the initial monitoring target regions are well constructed to fulfill the assumption (pages in same region have similar access frequencies), @@ -162,8 +190,22 @@ In this way, DAMON provides its best-effort quality and minimal overhead while keeping the bounds users set for their trade-off. +Age Tracking +~~~~~~~~~~~~ + +By analyzing the monitoring results, users can also find how long the current +access pattern of a region has maintained. That could be used for good +understanding of the access pattern. For example, page placement algorithm +utilizing both the frequency and the recency could be implemented using that. +To make such access pattern maintained period analysis easier, DAMON maintains +yet another counter called ``age`` in each region. For each ``aggregation +interval``, DAMON checks if the region's size and access frequency +(``nr_accesses``) has significantly changed. If so, the counter is reset to +zero. Otherwise, the counter is increased. + + Dynamic Target Space Updates Handling -------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The monitoring target address range could dynamically changed. For example, virtual memory could be dynamically mapped and unmapped. Physical memory could @@ -174,3 +216,246 @@ monitoring operations to check dynamic changes including memory mapping changes and applies it to monitoring operations-related data structures such as the abstracted monitoring target memory area only for each of a user-specified time interval (``update interval``). + + +.. _damon_design_damos: + +Operation Schemes +----------------- + +One common purpose of data access monitoring is access-aware system efficiency +optimizations. For example, + + paging out memory regions that are not accessed for more than two minutes + +or + + using THP for memory regions that are larger than 2 MiB and showing a high + access frequency for more than one minute. + +One straightforward approach for such schemes would be profile-guided +optimizations. That is, getting data access monitoring results of the +workloads or the system using DAMON, finding memory regions of special +characteristics by profiling the monitoring results, and making system +operation changes for the regions. The changes could be made by modifying or +providing advice to the software (the application and/or the kernel), or +reconfiguring the hardware. Both offline and online approaches could be +available. + +Among those, providing advice to the kernel at runtime would be flexible and +effective, and therefore widely be used. However, implementing such schemes +could impose unnecessary redundancy and inefficiency. The profiling could be +redundant if the type of interest is common. Exchanging the information +including monitoring results and operation advice between kernel and user +spaces could be inefficient. + +To allow users to reduce such redundancy and inefficiencies by offloading the +works, DAMON provides a feature called Data Access Monitoring-based Operation +Schemes (DAMOS). It lets users specify their desired schemes at a high +level. For such specifications, DAMON starts monitoring, finds regions having +the access pattern of interest, and applies the user-desired operation actions +to the regions as soon as found. + + +.. _damon_design_damos_action: + +Operation Action +~~~~~~~~~~~~~~~~ + +The management action that the users desire to apply to the regions of their +interest. For example, paging out, prioritizing for next reclamation victim +selection, advising ``khugepaged`` to collapse or split, or doing nothing but +collecting statistics of the regions. + +The list of supported actions is defined in DAMOS, but the implementation of +each action is in the DAMON operations set layer because the implementation +normally depends on the monitoring target address space. For example, the code +for paging specific virtual address ranges out would be different from that for +physical address ranges. And the monitoring operations implementation sets are +not mandated to support all actions of the list. Hence, the availability of +specific DAMOS action depends on what operations set is selected to be used +together. + +Applying an action to a region is considered as changing the region's +characteristics. Hence, DAMOS resets the age of regions when an action is +applied to those. + + +.. _damon_design_damos_access_pattern: + +Target Access Pattern +~~~~~~~~~~~~~~~~~~~~~ + +The access pattern of the schemes' interest. The patterns are constructed with +the properties that DAMON's monitoring results provide, specifically the size, +the access frequency, and the age. Users can describe their access pattern of +interest by setting minimum and maximum values of the three properties. If a +region's three properties are in the ranges, DAMOS classifies it as one of the +regions that the scheme is having an interest in. + + +.. _damon_design_damos_quotas: + +Quotas +~~~~~~ + +DAMOS upper-bound overhead control feature. DAMOS could incur high overhead if +the target access pattern is not properly tuned. For example, if a huge memory +region having the access pattern of interest is found, applying the scheme's +action to all pages of the huge region could consume unacceptably large system +resources. Preventing such issues by tuning the access pattern could be +challenging, especially if the access patterns of the workloads are highly +dynamic. + +To mitigate that situation, DAMOS provides an upper-bound overhead control +feature called quotas. It lets users specify an upper limit of time that DAMOS +can use for applying the action, and/or a maximum bytes of memory regions that +the action can be applied within a user-specified time duration. + + +.. _damon_design_damos_quotas_prioritization: + +Prioritization +^^^^^^^^^^^^^^ + +A mechanism for making a good decision under the quotas. When the action +cannot be applied to all regions of interest due to the quotas, DAMOS +prioritizes regions and applies the action to only regions having high enough +priorities so that it will not exceed the quotas. + +The prioritization mechanism should be different for each action. For example, +rarely accessed (colder) memory regions would be prioritized for page-out +scheme action. In contrast, the colder regions would be deprioritized for huge +page collapse scheme action. Hence, the prioritization mechanisms for each +action are implemented in each DAMON operations set, together with the actions. + +Though the implementation is up to the DAMON operations set, it would be common +to calculate the priority using the access pattern properties of the regions. +Some users would want the mechanisms to be personalized for their specific +case. For example, some users would want the mechanism to weigh the recency +(``age``) more than the access frequency (``nr_accesses``). DAMOS allows users +to specify the weight of each access pattern property and passes the +information to the underlying mechanism. Nevertheless, how and even whether +the weight will be respected are up to the underlying prioritization mechanism +implementation. + + +.. _damon_design_damos_watermarks: + +Watermarks +~~~~~~~~~~ + +Conditional DAMOS (de)activation automation. Users might want DAMOS to run +only under certain situations. For example, when a sufficient amount of free +memory is guaranteed, running a scheme for proactive reclamation would only +consume unnecessary system resources. To avoid such consumption, the user would +need to manually monitor some metrics such as free memory ratio, and turn +DAMON/DAMOS on or off. + +DAMOS allows users to offload such works using three watermarks. It allows the +users to configure the metric of their interest, and three watermark values, +namely high, middle, and low. If the value of the metric becomes above the +high watermark or below the low watermark, the scheme is deactivated. If the +metric becomes below the mid watermark but above the low watermark, the scheme +is activated. If all schemes are deactivated by the watermarks, the monitoring +is also deactivated. In this case, the DAMON worker thread only periodically +checks the watermarks and therefore incurs nearly zero overhead. + + +.. _damon_design_damos_filters: + +Filters +~~~~~~~ + +Non-access pattern-based target memory regions filtering. If users run +self-written programs or have good profiling tools, they could know something +more than the kernel, such as future access patterns or some special +requirements for specific types of memory. For example, some users may know +only anonymous pages can impact their program's performance. They can also +have a list of latency-critical processes. + +To let users optimize DAMOS schemes with such special knowledge, DAMOS provides +a feature called DAMOS filters. The feature allows users to set an arbitrary +number of filters for each scheme. Each filter specifies the type of target +memory, and whether it should exclude the memory of the type (filter-out), or +all except the memory of the type (filter-in). + +As of this writing, anonymous page type and memory cgroup type are supported by +the feature. Some filter target types can require additional arguments. For +example, the memory cgroup filter type asks users to specify the file path of +the memory cgroup for the filter. Hence, users can apply specific schemes to +only anonymous pages, non-anonymous pages, pages of specific cgroups, all pages +excluding those of specific cgroups, and any combination of those. + + +Application Programming Interface +--------------------------------- + +The programming interface for kernel space data access-aware applications. +DAMON is a framework, so it does nothing by itself. Instead, it only helps +other kernel components such as subsystems and modules building their data +access-aware applications using DAMON's core features. For this, DAMON exposes +its all features to other kernel components via its application programming +interface, namely ``include/linux/damon.h``. Please refer to the API +:doc:`document </mm/damon/api>` for details of the interface. + + +Modules +======= + +Because the core of DAMON is a framework for kernel components, it doesn't +provide any direct interface for the user space. Such interfaces should be +implemented by each DAMON API user kernel components, instead. DAMON subsystem +itself implements such DAMON API user modules, which are supposed to be used +for general purpose DAMON control and special purpose data access-aware system +operations, and provides stable application binary interfaces (ABI) for the +user space. The user space can build their efficient data access-aware +applications using the interfaces. + + +General Purpose User Interface Modules +-------------------------------------- + +DAMON modules that provide user space ABIs for general purpose DAMON usage in +runtime. + +DAMON user interface modules, namely 'DAMON sysfs interface' and 'DAMON debugfs +interface' are DAMON API user kernel modules that provide ABIs to the +user-space. Please note that DAMON debugfs interface is currently deprecated. + +Like many other ABIs, the modules create files on sysfs and debugfs, allow +users to specify their requests to and get the answers from DAMON by writing to +and reading from the files. As a response to such I/O, DAMON user interface +modules control DAMON and retrieve the results as user requested via the DAMON +API, and return the results to the user-space. + +The ABIs are designed to be used for user space applications development, +rather than human beings' fingers. Human users are recommended to use such +user space tools. One such Python-written user space tool is available at +Github (https://github.com/awslabs/damo), Pypi +(https://pypistats.org/packages/damo), and Fedora +(https://packages.fedoraproject.org/pkgs/python-damo/damo/). + +Please refer to the ABI :doc:`document </admin-guide/mm/damon/usage>` for +details of the interfaces. + + +Special-Purpose Access-aware Kernel Modules +------------------------------------------- + +DAMON modules that provide user space ABI for specific purpose DAMON usage. + +DAMON sysfs/debugfs user interfaces are for full control of all DAMON features +in runtime. For each special-purpose system-wide data access-aware system +operations such as proactive reclamation or LRU lists balancing, the interfaces +could be simplified by removing unnecessary knobs for the specific purpose, and +extended for boot-time and even compile time control. Default values of DAMON +control parameters for the usage would also need to be optimized for the +purpose. + +To support such cases, yet more DAMON API user kernel modules that provide more +simple and optimized user space interfaces are available. Currently, two +modules for proactive reclamation and LRU lists manipulation are provided. For +more detail, please read the usage documents for those +(:doc:`/admin-guide/mm/damon/reclaim` and +:doc:`/admin-guide/mm/damon/lru_sort`). diff --git a/Documentation/mm/damon/faq.rst b/Documentation/mm/damon/faq.rst index dde7e2414ee6..3279dc7a8211 100644 --- a/Documentation/mm/damon/faq.rst +++ b/Documentation/mm/damon/faq.rst @@ -4,29 +4,6 @@ Frequently Asked Questions ========================== -Why a new subsystem, instead of extending perf or other user space tools? -========================================================================= - -First, because it needs to be lightweight as much as possible so that it can be -used online, any unnecessary overhead such as kernel - user space context -switching cost should be avoided. Second, DAMON aims to be used by other -programs including the kernel. Therefore, having a dependency on specific -tools like perf is not desirable. These are the two biggest reasons why DAMON -is implemented in the kernel space. - - -Can 'idle pages tracking' or 'perf mem' substitute DAMON? -========================================================= - -Idle page tracking is a low level primitive for access check of the physical -address space. 'perf mem' is similar, though it can use sampling to minimize -the overhead. On the other hand, DAMON is a higher-level framework for the -monitoring of various address spaces. It is focused on memory management -optimization and provides sophisticated accuracy/overhead handling mechanisms. -Therefore, 'idle pages tracking' and 'perf mem' could provide a subset of -DAMON's output, but cannot substitute DAMON. - - Does DAMON support virtual memory only? ======================================= diff --git a/Documentation/mm/damon/maintainer-profile.rst b/Documentation/mm/damon/maintainer-profile.rst index 24a202f03de8..a84c14e59053 100644 --- a/Documentation/mm/damon/maintainer-profile.rst +++ b/Documentation/mm/damon/maintainer-profile.rst @@ -3,7 +3,7 @@ DAMON Maintainer Entry Profile ============================== -The DAMON subsystem covers the files that listed in 'DATA ACCESS MONITOR' +The DAMON subsystem covers the files that are listed in 'DATA ACCESS MONITOR' section of 'MAINTAINERS' file. The mailing lists for the subsystem are damon@lists.linux.dev and @@ -15,7 +15,7 @@ SCM Trees There are multiple Linux trees for DAMON development. Patches under development or testing are queued in damon/next [2]_ by the DAMON maintainer. -Suffieicntly reviewed patches will be queued in mm-unstable [1]_ by the memory +Sufficiently reviewed patches will be queued in mm-unstable [1]_ by the memory management subsystem maintainer. After more sufficient tests, the patches will be queued in mm-stable [3]_ , and finally pull-requested to the mainline by the memory management subsystem maintainer. diff --git a/Documentation/mm/page_migration.rst b/Documentation/mm/page_migration.rst index 313dce18893e..e35af7805be5 100644 --- a/Documentation/mm/page_migration.rst +++ b/Documentation/mm/page_migration.rst @@ -73,14 +73,13 @@ In kernel use of migrate_pages() It also prevents the swapper or other scans from encountering the page. -2. We need to have a function of type new_page_t that can be +2. We need to have a function of type new_folio_t that can be passed to migrate_pages(). This function should figure out - how to allocate the correct new page given the old page. + how to allocate the correct new folio given the old folio. 3. The migrate_pages() function is called which attempts to do the migration. It will call the function to allocate - the new page for each page that is considered for - moving. + the new folio for each folio that is considered for moving. How migrate_pages() works ========================= diff --git a/Documentation/mm/page_table_check.rst b/Documentation/mm/page_table_check.rst index cfd8f4117cf3..c12838ce6b8d 100644 --- a/Documentation/mm/page_table_check.rst +++ b/Documentation/mm/page_table_check.rst @@ -52,3 +52,22 @@ Build kernel with: Optionally, build kernel with PAGE_TABLE_CHECK_ENFORCED in order to have page table support without extra kernel parameter. + +Implementation notes +==================== + +We specifically decided not to use VMA information in order to avoid relying on +MM states (except for limited "struct page" info). The page table check is a +separate from Linux-MM state machine that verifies that the user accessible +pages are not falsely shared. + +PAGE_TABLE_CHECK depends on EXCLUSIVE_SYSTEM_RAM. The reason is that without +EXCLUSIVE_SYSTEM_RAM, users are allowed to map arbitrary physical memory +regions into the userspace via /dev/mem. At the same time, pages may change +their properties (e.g., from anonymous pages to named pages) while they are +still being mapped in the userspace, leading to "corruption" detected by the +page table check. + +Even with EXCLUSIVE_SYSTEM_RAM, I/O pages may be still allowed to be mapped via +/dev/mem. However, these pages are always considered as named pages, so they +won't break the logic used in the page table check. diff --git a/Documentation/mm/page_tables.rst b/Documentation/mm/page_tables.rst index 96939571d7bc..7840c1891751 100644 --- a/Documentation/mm/page_tables.rst +++ b/Documentation/mm/page_tables.rst @@ -3,3 +3,152 @@ =========== Page Tables =========== + +Paged virtual memory was invented along with virtual memory as a concept in +1962 on the Ferranti Atlas Computer which was the first computer with paged +virtual memory. The feature migrated to newer computers and became a de facto +feature of all Unix-like systems as time went by. In 1985 the feature was +included in the Intel 80386, which was the CPU Linux 1.0 was developed on. + +Page tables map virtual addresses as seen by the CPU into physical addresses +as seen on the external memory bus. + +Linux defines page tables as a hierarchy which is currently five levels in +height. The architecture code for each supported architecture will then +map this to the restrictions of the hardware. + +The physical address corresponding to the virtual address is often referenced +by the underlying physical page frame. The **page frame number** or **pfn** +is the physical address of the page (as seen on the external memory bus) +divided by `PAGE_SIZE`. + +Physical memory address 0 will be *pfn 0* and the highest pfn will be +the last page of physical memory the external address bus of the CPU can +address. + +With a page granularity of 4KB and a address range of 32 bits, pfn 0 is at +address 0x00000000, pfn 1 is at address 0x00001000, pfn 2 is at 0x00002000 +and so on until we reach pfn 0xfffff at 0xfffff000. With 16KB pages pfs are +at 0x00004000, 0x00008000 ... 0xffffc000 and pfn goes from 0 to 0x3fffff. + +As you can see, with 4KB pages the page base address uses bits 12-31 of the +address, and this is why `PAGE_SHIFT` in this case is defined as 12 and +`PAGE_SIZE` is usually defined in terms of the page shift as `(1 << PAGE_SHIFT)` + +Over time a deeper hierarchy has been developed in response to increasing memory +sizes. When Linux was created, 4KB pages and a single page table called +`swapper_pg_dir` with 1024 entries was used, covering 4MB which coincided with +the fact that Torvald's first computer had 4MB of physical memory. Entries in +this single table were referred to as *PTE*:s - page table entries. + +The software page table hierarchy reflects the fact that page table hardware has +become hierarchical and that in turn is done to save page table memory and +speed up mapping. + +One could of course imagine a single, linear page table with enormous amounts +of entries, breaking down the whole memory into single pages. Such a page table +would be very sparse, because large portions of the virtual memory usually +remains unused. By using hierarchical page tables large holes in the virtual +address space does not waste valuable page table memory, because it will suffice +to mark large areas as unmapped at a higher level in the page table hierarchy. + +Additionally, on modern CPUs, a higher level page table entry can point directly +to a physical memory range, which allows mapping a contiguous range of several +megabytes or even gigabytes in a single high-level page table entry, taking +shortcuts in mapping virtual memory to physical memory: there is no need to +traverse deeper in the hierarchy when you find a large mapped range like this. + +The page table hierarchy has now developed into this:: + + +-----+ + | PGD | + +-----+ + | + | +-----+ + +-->| P4D | + +-----+ + | + | +-----+ + +-->| PUD | + +-----+ + | + | +-----+ + +-->| PMD | + +-----+ + | + | +-----+ + +-->| PTE | + +-----+ + + +Symbols on the different levels of the page table hierarchy have the following +meaning beginning from the bottom: + +- **pte**, `pte_t`, `pteval_t` = **Page Table Entry** - mentioned earlier. + The *pte* is an array of `PTRS_PER_PTE` elements of the `pteval_t` type, each + mapping a single page of virtual memory to a single page of physical memory. + The architecture defines the size and contents of `pteval_t`. + + A typical example is that the `pteval_t` is a 32- or 64-bit value with the + upper bits being a **pfn** (page frame number), and the lower bits being some + architecture-specific bits such as memory protection. + + The **entry** part of the name is a bit confusing because while in Linux 1.0 + this did refer to a single page table entry in the single top level page + table, it was retrofitted to be an array of mapping elements when two-level + page tables were first introduced, so the *pte* is the lowermost page + *table*, not a page table *entry*. + +- **pmd**, `pmd_t`, `pmdval_t` = **Page Middle Directory**, the hierarchy right + above the *pte*, with `PTRS_PER_PMD` references to the *pte*:s. + +- **pud**, `pud_t`, `pudval_t` = **Page Upper Directory** was introduced after + the other levels to handle 4-level page tables. It is potentially unused, + or *folded* as we will discuss later. + +- **p4d**, `p4d_t`, `p4dval_t` = **Page Level 4 Directory** was introduced to + handle 5-level page tables after the *pud* was introduced. Now it was clear + that we needed to replace *pgd*, *pmd*, *pud* etc with a figure indicating the + directory level and that we cannot go on with ad hoc names any more. This + is only used on systems which actually have 5 levels of page tables, otherwise + it is folded. + +- **pgd**, `pgd_t`, `pgdval_t` = **Page Global Directory** - the Linux kernel + main page table handling the PGD for the kernel memory is still found in + `swapper_pg_dir`, but each userspace process in the system also has its own + memory context and thus its own *pgd*, found in `struct mm_struct` which + in turn is referenced to in each `struct task_struct`. So tasks have memory + context in the form of a `struct mm_struct` and this in turn has a + `struct pgt_t *pgd` pointer to the corresponding page global directory. + +To repeat: each level in the page table hierarchy is a *array of pointers*, so +the **pgd** contains `PTRS_PER_PGD` pointers to the next level below, **p4d** +contains `PTRS_PER_P4D` pointers to **pud** items and so on. The number of +pointers on each level is architecture-defined.:: + + PMD + --> +-----+ PTE + | ptr |-------> +-----+ + | ptr |- | ptr |-------> PAGE + | ptr | \ | ptr | + | ptr | \ ... + | ... | \ + | ptr | \ PTE + +-----+ +----> +-----+ + | ptr |-------> PAGE + | ptr | + ... + + +Page Table Folding +================== + +If the architecture does not use all the page table levels, they can be *folded* +which means skipped, and all operations performed on page tables will be +compile-time augmented to just skip a level when accessing the next lower +level. + +Page table handling code that wishes to be architecture-neutral, such as the +virtual memory manager, will need to be written so that it traverses all of the +currently five levels. This style should also be preferred for +architecture-specific code, so as to be robust to future changes. diff --git a/Documentation/mm/split_page_table_lock.rst b/Documentation/mm/split_page_table_lock.rst index 50ee0dfc95be..a834fad9de12 100644 --- a/Documentation/mm/split_page_table_lock.rst +++ b/Documentation/mm/split_page_table_lock.rst @@ -14,15 +14,20 @@ tables. Access to higher level tables protected by mm->page_table_lock. There are helpers to lock/unlock a table and other accessor functions: - pte_offset_map_lock() - maps pte and takes PTE table lock, returns pointer to the taken - lock; + maps PTE and takes PTE table lock, returns pointer to PTE with + pointer to its PTE table lock, or returns NULL if no PTE table; + - pte_offset_map_nolock() + maps PTE, returns pointer to PTE with pointer to its PTE table + lock (not taken), or returns NULL if no PTE table; + - pte_offset_map() + maps PTE, returns pointer to PTE, or returns NULL if no PTE table; + - pte_unmap() + unmaps PTE table; - pte_unmap_unlock() unlocks and unmaps PTE table; - pte_alloc_map_lock() - allocates PTE table if needed and take the lock, returns pointer - to taken lock or NULL if allocation failed; - - pte_lockptr() - returns pointer to PTE table lock; + allocates PTE table if needed and takes its lock, returns pointer to + PTE with pointer to its lock, or returns NULL if allocation failed; - pmd_lock() takes PMD table lock, returns pointer to taken lock; - pmd_lockptr() diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml index 8e8c17b0a6c6..57d1c1c4918f 100644 --- a/Documentation/netlink/genetlink-c.yaml +++ b/Documentation/netlink/genetlink-c.yaml @@ -195,6 +195,16 @@ properties: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' sub-type: *attr-type + display-hint: &display-hint + description: | + Optional format indicator that is intended only for choosing + the right formatting mechanism when displaying values of this + type. + enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] + # Start genetlink-c + name-prefix: + type: string + # End genetlink-c # Make sure name-prefix does not appear in subsets (subsets inherit naming) dependencies: diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml index b33541a51d6b..43b769c98fb2 100644 --- a/Documentation/netlink/genetlink-legacy.yaml +++ b/Documentation/netlink/genetlink-legacy.yaml @@ -119,9 +119,24 @@ properties: name: type: string type: - enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string ] + description: The netlink attribute type + enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary ] len: $ref: '#/$defs/len-or-define' + byte-order: + enum: [ little-endian, big-endian ] + doc: + description: Documentation for the struct member attribute. + type: string + enum: + description: Name of the enum type used for the attribute. + type: string + display-hint: &display-hint + description: | + Optional format indicator that is intended only for choosing + the right formatting mechanism when displaying values of this + type. + enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] # End genetlink-legacy attribute-sets: @@ -171,6 +186,7 @@ properties: name: type: string type: &attr-type + description: The netlink attribute type enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64, string, nest, array-nest, nest-type-value ] doc: @@ -218,6 +234,11 @@ properties: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' sub-type: *attr-type + display-hint: *display-hint + # Start genetlink-c + name-prefix: + type: string + # End genetlink-c # Start genetlink-legacy struct: description: Name of the struct type used for the attribute. diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml index d8b2cdeba058..1cbb448d2f1c 100644 --- a/Documentation/netlink/genetlink.yaml +++ b/Documentation/netlink/genetlink.yaml @@ -168,6 +168,12 @@ properties: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' sub-type: *attr-type + display-hint: &display-hint + description: | + Optional format indicator that is intended only for choosing + the right formatting mechanism when displaying values of this + type. + enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] # Make sure name-prefix does not appear in subsets (subsets inherit naming) dependencies: diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 90641668232e..5d46ca966979 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -9,6 +9,7 @@ doc: Partial family for Devlink. attribute-sets: - name: devlink + name-prefix: devlink-attr- attributes: - name: bus-name @@ -95,10 +96,12 @@ attribute-sets: - name: reload-action-info type: nest + multi-attr: true nested-attributes: dl-reload-act-info - name: reload-action-stats type: nest + multi-attr: true nested-attributes: dl-reload-act-stats - name: dl-dev-stats @@ -196,3 +199,8 @@ operations: attributes: - bus-name - dev-name + - info-driver-name + - info-serial-number + - info-version-fixed + - info-version-running + - info-version-stored diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 129f413ea349..837b565577ca 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -9,8 +9,13 @@ doc: Partial family for Ethtool Netlink. definitions: - name: udp-tunnel-type + enum-name: type: enum entries: [ vxlan, geneve, vxlan-gpe ] + - + name: stringset + type: enum + entries: [] attribute-sets: - @@ -61,22 +66,6 @@ attribute-sets: nested-attributes: bitset-bits - - name: u64-array - attributes: - - - name: u64 - type: nest - multi-attr: true - nested-attributes: u64 - - - name: s32-array - attributes: - - - name: s32 - type: nest - multi-attr: true - nested-attributes: s32 - - name: string attributes: - @@ -239,7 +228,7 @@ attribute-sets: name: tx-min-frag-size type: u32 - - name: tx-min-frag-size + name: rx-min-frag-size type: u32 - name: verify-enabled @@ -310,7 +299,7 @@ attribute-sets: name: master-slave-state type: u8 - - name: master-slave-lanes + name: lanes type: u32 - name: rate-matching @@ -338,7 +327,7 @@ attribute-sets: name: ext-substate type: u8 - - name: down-cnt + name: ext-down-cnt type: u32 - name: debug @@ -513,7 +502,7 @@ attribute-sets: attributes: - name: pad - type: u32 + type: pad - name: tx-frames type: u64 @@ -593,7 +582,7 @@ attribute-sets: name: phc-index type: u32 - - name: cable-test-nft-nest-result + name: cable-result attributes: - name: pair @@ -602,7 +591,7 @@ attribute-sets: name: code type: u8 - - name: cable-test-nft-nest-fault-length + name: cable-fault-length attributes: - name: pair @@ -611,16 +600,16 @@ attribute-sets: name: cm type: u32 - - name: cable-test-nft-nest + name: cable-nest attributes: - name: result type: nest - nested-attributes: cable-test-nft-nest-result + nested-attributes: cable-result - name: fault-length type: nest - nested-attributes: cable-test-nft-nest-fault-length + nested-attributes: cable-fault-length - name: cable-test attributes: @@ -628,13 +617,20 @@ attribute-sets: name: header type: nest nested-attributes: header + - + name: cable-test-ntf + attributes: + - + name: header + type: nest + nested-attributes: header - name: status type: u8 - name: nest type: nest - nested-attributes: cable-test-nft-nest + nested-attributes: cable-nest - name: cable-test-tdr-cfg attributes: @@ -648,8 +644,22 @@ attribute-sets: name: step type: u32 - - name: pari + name: pair + type: u8 + - + name: cable-test-tdr-ntf + attributes: + - + name: header + type: nest + nested-attributes: header + - + name: status type: u8 + - + name: nest + type: nest + nested-attributes: cable-nest - name: cable-test-tdr attributes: @@ -662,7 +672,7 @@ attribute-sets: type: nest nested-attributes: cable-test-tdr-cfg - - name: tunnel-info-udp-entry + name: tunnel-udp-entry attributes: - name: port @@ -673,7 +683,7 @@ attribute-sets: type: u32 enum: udp-tunnel-type - - name: tunnel-info-udp-table + name: tunnel-udp-table attributes: - name: size @@ -683,9 +693,17 @@ attribute-sets: type: nest nested-attributes: bitset - - name: udp-ports + name: entry type: nest - nested-attributes: tunnel-info-udp-entry + multi-attr: true + nested-attributes: tunnel-udp-entry + - + name: tunnel-udp + attributes: + - + name: table + type: nest + nested-attributes: tunnel-udp-table - name: tunnel-info attributes: @@ -696,25 +714,25 @@ attribute-sets: - name: udp-ports type: nest - nested-attributes: tunnel-info-udp-table + nested-attributes: tunnel-udp - name: fec-stat attributes: - name: pad - type: u8 + type: pad - name: corrected - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: uncorr - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: corr-bits - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: fec attributes: @@ -766,7 +784,7 @@ attribute-sets: attributes: - name: pad - type: u32 + type: pad - name: id type: u32 @@ -775,16 +793,16 @@ attribute-sets: type: u32 - name: stat - type: nest - nested-attributes: u64 + type: u64 + type-value: [ id ] - name: hist-rx type: nest - nested-attributes: u64 + nested-attributes: stats-grp-hist - name: hist-tx type: nest - nested-attributes: u64 + nested-attributes: stats-grp-hist - name: hist-bkt-low type: u32 @@ -792,14 +810,27 @@ attribute-sets: name: hist-bkt-hi type: u32 - - name: hist-bkt-val + name: hist-val + type: u64 + - + name: stats-grp-hist + subset-of: stats-grp + attributes: + - + name: hist-bkt-low + type: u32 + - + name: hist-bkt-hi + type: u32 + - + name: hist-val type: u64 - name: stats attributes: - name: pad - type: u32 + type: pad - name: header type: nest @@ -827,8 +858,8 @@ attribute-sets: type: u32 - name: index - type: nest - nested-attributes: s32-array + type: binary + sub-type: s32 - name: module attributes: @@ -852,12 +883,15 @@ attribute-sets: - name: admin-state type: u32 + name-prefix: ethtool-a-podl-pse- - name: admin-control type: u32 + name-prefix: ethtool-a-podl-pse- - name: pw-d-status type: u32 + name-prefix: ethtool-a-podl-pse- - name: rss attributes: @@ -911,6 +945,7 @@ attribute-sets: operations: enum-model: directional + name-prefix: ethtool-msg- list: - name: strset-get @@ -981,7 +1016,7 @@ operations: - duplex - master-slave-cfg - master-slave-state - - master-slave-lanes + - lanes - rate-matching dump: *linkmodes-get-op - @@ -1015,7 +1050,7 @@ operations: - sqi-max - ext-state - ext-substate - - down-cnt + - ext-down-cnt dump: *linkstate-get-op - name: debug-get @@ -1364,10 +1399,16 @@ operations: request: attributes: - header - reply: - attributes: - - header - - cable-test-nft-nest + - + name: cable-test-ntf + doc: Cable test notification. + + attribute-set: cable-test-ntf + + event: + attributes: + - header + - status - name: cable-test-tdr-act doc: Cable test TDR. @@ -1378,10 +1419,17 @@ operations: request: attributes: - header - reply: - attributes: - - header - - cable-test-tdr-cfg + - + name: cable-test-tdr-ntf + doc: Cable test TDR notification. + + attribute-set: cable-test-tdr-ntf + + event: + attributes: + - header + - status + - nest - name: tunnel-info-get doc: Get tsinfo params. @@ -1555,7 +1603,7 @@ operations: - hkey dump: *rss-get-op - - name: plca-get + name: plca-get-cfg doc: Get PLCA params. attribute-set: plca @@ -1577,7 +1625,7 @@ operations: - burst-tmr dump: *plca-get-op - - name: plca-set + name: plca-set-cfg doc: Set PLCA params. attribute-set: plca @@ -1601,7 +1649,7 @@ operations: - name: plca-ntf doc: Notification for change in PLCA params. - notify: plca-get + notify: plca-get-cfg - name: mm-get doc: Get MAC Merge configuration and state diff --git a/Documentation/netlink/specs/handshake.yaml b/Documentation/netlink/specs/handshake.yaml index 614f1a585511..6d89e30f5fd5 100644 --- a/Documentation/netlink/specs/handshake.yaml +++ b/Documentation/netlink/specs/handshake.yaml @@ -68,6 +68,9 @@ attribute-sets: type: nest nested-attributes: x509 multi-attr: true + - + name: peername + type: string - name: done attributes: @@ -105,6 +108,7 @@ operations: - auth-mode - peer-identity - certificate + - peername - name: done doc: Handler reports handshake completion diff --git a/Documentation/netlink/specs/ovs_datapath.yaml b/Documentation/netlink/specs/ovs_datapath.yaml index 6d71db8c4416..f709c26c3e92 100644 --- a/Documentation/netlink/specs/ovs_datapath.yaml +++ b/Documentation/netlink/specs/ovs_datapath.yaml @@ -3,6 +3,7 @@ name: ovs_datapath version: 2 protocol: genetlink-legacy +uapi-header: linux/openvswitch.h doc: OVS datapath configuration over generic netlink. @@ -18,6 +19,7 @@ definitions: - name: user-features type: flags + name-prefix: ovs-dp-f- entries: - name: unaligned @@ -33,35 +35,37 @@ definitions: doc: Allow per-cpu dispatch of upcalls - name: datapath-stats + enum-name: ovs-dp-stats type: struct members: - - name: hit + name: n-hit type: u64 - - name: missed + name: n-missed type: u64 - - name: lost + name: n-lost type: u64 - - name: flows + name: n-flows type: u64 - name: megaflow-stats + enum-name: ovs-dp-megaflow-stats type: struct members: - - name: mask-hit + name: n-mask-hit type: u64 - - name: masks + name: n-masks type: u32 - name: padding type: u32 - - name: cache-hits + name: n-cache-hit type: u64 - name: pad1 @@ -70,6 +74,8 @@ definitions: attribute-sets: - name: datapath + name-prefix: ovs-dp-attr- + enum-name: ovs-datapath-attrs attributes: - name: name @@ -101,12 +107,16 @@ attribute-sets: name: per-cpu-pids type: binary sub-type: u32 + - + name: ifindex + type: u32 operations: fixed-header: ovs-header + name-prefix: ovs-dp-cmd- list: - - name: dp-get + name: get doc: Get / dump OVS data path configuration and state value: 3 attribute-set: datapath @@ -125,7 +135,7 @@ operations: - per-cpu-pids dump: *dp-get-op - - name: dp-new + name: new doc: Create new OVS data path value: 1 attribute-set: datapath @@ -137,7 +147,7 @@ operations: - upcall-pid - user-features - - name: dp-del + name: del doc: Delete existing OVS data path value: 2 attribute-set: datapath diff --git a/Documentation/netlink/specs/ovs_flow.yaml b/Documentation/netlink/specs/ovs_flow.yaml new file mode 100644 index 000000000000..109ca1f57b6c --- /dev/null +++ b/Documentation/netlink/specs/ovs_flow.yaml @@ -0,0 +1,980 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: ovs_flow +version: 1 +protocol: genetlink-legacy +uapi-header: linux/openvswitch.h + +doc: + OVS flow configuration over generic netlink. + +definitions: + - + name: ovs-header + type: struct + doc: | + Header for OVS Generic Netlink messages. + members: + - + name: dp-ifindex + type: u32 + doc: | + ifindex of local port for datapath (0 to make a request not specific + to a datapath). + - + name: ovs-flow-stats + type: struct + members: + - + name: n-packets + type: u64 + doc: Number of matched packets. + - + name: n-bytes + type: u64 + doc: Number of matched bytes. + - + name: ovs-key-ethernet + type: struct + members: + - + name: eth-src + type: binary + len: 6 + display-hint: mac + - + name: eth-dst + type: binary + len: 6 + display-hint: mac + - + name: ovs-key-mpls + type: struct + members: + - + name: mpls-lse + type: u32 + byte-order: big-endian + - + name: ovs-key-ipv4 + type: struct + members: + - + name: ipv4-src + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: ipv4-dst + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: ipv4-proto + type: u8 + - + name: ipv4-tos + type: u8 + - + name: ipv4-ttl + type: u8 + - + name: ipv4-frag + type: u8 + enum: ovs-frag-type + - + name: ovs-key-ipv6 + type: struct + members: + - + name: ipv6-src + type: binary + len: 16 + byte-order: big-endian + display-hint: ipv6 + - + name: ipv6-dst + type: binary + len: 16 + byte-order: big-endian + display-hint: ipv6 + - + name: ipv6-label + type: u32 + byte-order: big-endian + - + name: ipv6-proto + type: u8 + - + name: ipv6-tclass + type: u8 + - + name: ipv6-hlimit + type: u8 + - + name: ipv6-frag + type: u8 + - + name: ovs-key-ipv6-exthdrs + type: struct + members: + - + name: hdrs + type: u16 + - + name: ovs-frag-type + name-prefix: ovs-frag-type- + type: enum + entries: + - + name: none + doc: Packet is not a fragment. + - + name: first + doc: Packet is a fragment with offset 0. + - + name: later + doc: Packet is a fragment with nonzero offset. + - + name: any + value: 255 + - + name: ovs-key-tcp + type: struct + members: + - + name: tcp-src + type: u16 + byte-order: big-endian + - + name: tcp-dst + type: u16 + byte-order: big-endian + - + name: ovs-key-udp + type: struct + members: + - + name: udp-src + type: u16 + byte-order: big-endian + - + name: udp-dst + type: u16 + byte-order: big-endian + - + name: ovs-key-sctp + type: struct + members: + - + name: sctp-src + type: u16 + byte-order: big-endian + - + name: sctp-dst + type: u16 + byte-order: big-endian + - + name: ovs-key-icmp + type: struct + members: + - + name: icmp-type + type: u8 + - + name: icmp-code + type: u8 + - + name: ovs-key-arp + type: struct + members: + - + name: arp-sip + type: u32 + byte-order: big-endian + - + name: arp-tip + type: u32 + byte-order: big-endian + - + name: arp-op + type: u16 + byte-order: big-endian + - + name: arp-sha + type: binary + len: 6 + display-hint: mac + - + name: arp-tha + type: binary + len: 6 + display-hint: mac + - + name: ovs-key-nd + type: struct + members: + - + name: nd_target + type: binary + len: 16 + byte-order: big-endian + - + name: nd-sll + type: binary + len: 6 + display-hint: mac + - + name: nd-tll + type: binary + len: 6 + display-hint: mac + - + name: ovs-key-ct-tuple-ipv4 + type: struct + members: + - + name: ipv4-src + type: u32 + byte-order: big-endian + - + name: ipv4-dst + type: u32 + byte-order: big-endian + - + name: src-port + type: u16 + byte-order: big-endian + - + name: dst-port + type: u16 + byte-order: big-endian + - + name: ipv4-proto + type: u8 + - + name: ovs-action-push-vlan + type: struct + members: + - + name: vlan_tpid + type: u16 + byte-order: big-endian + doc: Tag protocol identifier (TPID) to push. + - + name: vlan_tci + type: u16 + byte-order: big-endian + doc: Tag control identifier (TCI) to push. + - + name: ovs-ufid-flags + name-prefix: ovs-ufid-f- + type: flags + entries: + - omit-key + - omit-mask + - omit-actions + - + name: ovs-action-hash + type: struct + members: + - + name: hash-alg + type: u32 + doc: Algorithm used to compute hash prior to recirculation. + - + name: hash-basis + type: u32 + doc: Basis used for computing hash. + - + name: ovs-hash-alg + type: enum + doc: | + Data path hash algorithm for computing Datapath hash. The algorithm type only specifies + the fields in a flow will be used as part of the hash. Each datapath is free to use its + own hash algorithm. The hash value will be opaque to the user space daemon. + entries: + - ovs-hash-alg-l4 + + - + name: ovs-action-push-mpls + type: struct + members: + - + name: mpls-lse + type: u32 + byte-order: big-endian + doc: | + MPLS label stack entry to push + - + name: mpls-ethertype + type: u32 + byte-order: big-endian + doc: | + Ethertype to set in the encapsulating ethernet frame. The only values + ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC, + indicating MPLS unicast or multicast. Other are rejected. + - + name: ovs-action-add-mpls + type: struct + members: + - + name: mpls-lse + type: u32 + byte-order: big-endian + doc: | + MPLS label stack entry to push + - + name: mpls-ethertype + type: u32 + byte-order: big-endian + doc: | + Ethertype to set in the encapsulating ethernet frame. The only values + ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC, + indicating MPLS unicast or multicast. Other are rejected. + - + name: tun-flags + type: u16 + doc: | + MPLS tunnel attributes. + - + name: ct-state-flags + type: flags + name-prefix: ovs-cs-f- + entries: + - + name: new + doc: Beginning of a new connection. + - + name: established + doc: Part of an existing connenction + - + name: related + doc: Related to an existing connection. + - + name: reply-dir + doc: Flow is in the reply direction. + - + name: invalid + doc: Could not track the connection. + - + name: tracked + doc: Conntrack has occurred. + - + name: src-nat + doc: Packet's source address/port was mangled by NAT. + - + name: dst-nat + doc: Packet's destination address/port was mangled by NAT. + +attribute-sets: + - + name: flow-attrs + enum-name: ovs-flow-attr + name-prefix: ovs-flow-attr- + attributes: + - + name: key + type: nest + nested-attributes: key-attrs + doc: | + Nested attributes specifying the flow key. Always present in + notifications. Required for all requests (except dumps). + - + name: actions + type: nest + nested-attributes: action-attrs + doc: | + Nested attributes specifying the actions to take for packets that + match the key. Always present in notifications. Required for + OVS_FLOW_CMD_NEW requests, optional for OVS_FLOW_CMD_SET requests. An + OVS_FLOW_CMD_SET without OVS_FLOW_ATTR_ACTIONS will not modify the + actions. To clear the actions, an OVS_FLOW_ATTR_ACTIONS without any + nested attributes must be given. + - + name: stats + type: binary + struct: ovs-flow-stats + doc: | + Statistics for this flow. Present in notifications if the stats would + be nonzero. Ignored in requests. + - + name: tcp-flags + type: u8 + doc: | + An 8-bit value giving the ORed value of all of the TCP flags seen on + packets in this flow. Only present in notifications for TCP flows, and + only if it would be nonzero. Ignored in requests. + - + name: used + type: u64 + doc: | + A 64-bit integer giving the time, in milliseconds on the system + monotonic clock, at which a packet was last processed for this + flow. Only present in notifications if a packet has been processed for + this flow. Ignored in requests. + - + name: clear + type: flag + doc: | + If present in a OVS_FLOW_CMD_SET request, clears the last-used time, + accumulated TCP flags, and statistics for this flow. Otherwise + ignored in requests. Never present in notifications. + - + name: mask + type: nest + nested-attributes: key-attrs + doc: | + Nested attributes specifying the mask bits for wildcarded flow + match. Mask bit value '1' specifies exact match with corresponding + flow key bit, while mask bit value '0' specifies a wildcarded + match. Omitting attribute is treated as wildcarding all corresponding + fields. Optional for all requests. If not present, all flow key bits + are exact match bits. + - + name: probe + type: binary + doc: | + Flow operation is a feature probe, error logging should be suppressed. + - + name: ufid + type: binary + doc: | + A value between 1-16 octets specifying a unique identifier for the + flow. Causes the flow to be indexed by this value rather than the + value of the OVS_FLOW_ATTR_KEY attribute. Optional for all + requests. Present in notifications if the flow was created with this + attribute. + display-hint: uuid + - + name: ufid-flags + type: u32 + enum: ovs-ufid-flags + doc: | + A 32-bit value of ORed flags that provide alternative semantics for + flow installation and retrieval. Optional for all requests. + - + name: pad + type: binary + + - + name: key-attrs + enum-name: ovs-key-attr + name-prefix: ovs-key-attr- + attributes: + - + name: encap + type: nest + nested-attributes: key-attrs + - + name: priority + type: u32 + - + name: in-port + type: u32 + - + name: ethernet + type: binary + struct: ovs-key-ethernet + doc: struct ovs_key_ethernet + - + name: vlan + type: u16 + byte-order: big-endian + - + name: ethertype + type: u16 + byte-order: big-endian + - + name: ipv4 + type: binary + struct: ovs-key-ipv4 + - + name: ipv6 + type: binary + struct: ovs-key-ipv6 + doc: struct ovs_key_ipv6 + - + name: tcp + type: binary + struct: ovs-key-tcp + - + name: udp + type: binary + struct: ovs-key-udp + - + name: icmp + type: binary + struct: ovs-key-icmp + - + name: icmpv6 + type: binary + struct: ovs-key-icmp + - + name: arp + type: binary + struct: ovs-key-arp + doc: struct ovs_key_arp + - + name: nd + type: binary + struct: ovs-key-nd + doc: struct ovs_key_nd + - + name: skb-mark + type: u32 + - + name: tunnel + type: nest + nested-attributes: tunnel-key-attrs + - + name: sctp + type: binary + struct: ovs-key-sctp + - + name: tcp-flags + type: u16 + byte-order: big-endian + - + name: dp-hash + type: u32 + doc: Value 0 indicates the hash is not computed by the datapath. + - + name: recirc-id + type: u32 + - + name: mpls + type: binary + struct: ovs-key-mpls + - + name: ct-state + type: u32 + enum: ct-state-flags + enum-as-flags: true + - + name: ct-zone + type: u16 + doc: connection tracking zone + - + name: ct-mark + type: u32 + doc: connection tracking mark + - + name: ct-labels + type: binary + display-hint: hex + doc: 16-octet connection tracking label + - + name: ct-orig-tuple-ipv4 + type: binary + struct: ovs-key-ct-tuple-ipv4 + - + name: ct-orig-tuple-ipv6 + type: binary + doc: struct ovs_key_ct_tuple_ipv6 + - + name: nsh + type: nest + nested-attributes: ovs-nsh-key-attrs + - + name: packet-type + type: u32 + byte-order: big-endian + doc: Should not be sent to the kernel + - + name: nd-extensions + type: binary + doc: Should not be sent to the kernel + - + name: tunnel-info + type: binary + doc: struct ip_tunnel_info + - + name: ipv6-exthdrs + type: binary + struct: ovs-key-ipv6-exthdrs + doc: struct ovs_key_ipv6_exthdr + - + name: action-attrs + enum-name: ovs-action-attr + name-prefix: ovs-action-attr- + attributes: + - + name: output + type: u32 + doc: ovs port number in datapath + - + name: userspace + type: nest + nested-attributes: userspace-attrs + - + name: set + type: nest + nested-attributes: key-attrs + doc: Replaces the contents of an existing header. The single nested attribute specifies a header to modify and its value. + - + name: push-vlan + type: binary + struct: ovs-action-push-vlan + doc: Push a new outermost 802.1Q or 802.1ad header onto the packet. + - + name: pop-vlan + type: flag + doc: Pop the outermost 802.1Q or 802.1ad header from the packet. + - + name: sample + type: nest + nested-attributes: sample-attrs + doc: | + Probabilistically executes actions, as specified in the nested attributes. + - + name: recirc + type: u32 + doc: recirc id + - + name: hash + type: binary + struct: ovs-action-hash + - + name: push-mpls + type: binary + struct: ovs-action-push-mpls + doc: | + Push a new MPLS label stack entry onto the top of the packets MPLS + label stack. Set the ethertype of the encapsulating frame to either + ETH_P_MPLS_UC or ETH_P_MPLS_MC to indicate the new packet contents. + - + name: pop-mpls + type: u16 + byte-order: big-endian + doc: ethertype + - + name: set-masked + type: nest + nested-attributes: key-attrs + doc: | + Replaces the contents of an existing header. A nested attribute + specifies a header to modify, its value, and a mask. For every bit set + in the mask, the corresponding bit value is copied from the value to + the packet header field, rest of the bits are left unchanged. The + non-masked value bits must be passed in as zeroes. Masking is not + supported for the OVS_KEY_ATTR_TUNNEL attribute. + - + name: ct + type: nest + nested-attributes: ct-attrs + doc: | + Track the connection. Populate the conntrack-related entries + in the flow key. + - + name: trunc + type: u32 + doc: struct ovs_action_trunc is a u32 max length + - + name: push-eth + type: binary + doc: struct ovs_action_push_eth + - + name: pop-eth + type: flag + - + name: ct-clear + type: flag + - + name: push-nsh + type: nest + nested-attributes: ovs-nsh-key-attrs + doc: | + Push NSH header to the packet. + - + name: pop-nsh + type: flag + doc: | + Pop the outermost NSH header off the packet. + - + name: meter + type: u32 + doc: | + Run packet through a meter, which may drop the packet, or modify the + packet (e.g., change the DSCP field) + - + name: clone + type: nest + nested-attributes: action-attrs + doc: | + Make a copy of the packet and execute a list of actions without + affecting the original packet and key. + - + name: check-pkt-len + type: nest + nested-attributes: check-pkt-len-attrs + doc: | + Check the packet length and execute a set of actions if greater than + the specified packet length, else execute another set of actions. + - + name: add-mpls + type: binary + struct: ovs-action-add-mpls + doc: | + Push a new MPLS label stack entry at the start of the packet or at the + start of the l3 header depending on the value of l3 tunnel flag in the + tun_flags field of this OVS_ACTION_ATTR_ADD_MPLS argument. + - + name: dec-ttl + type: nest + nested-attributes: dec-ttl-attrs + - + name: tunnel-key-attrs + enum-name: ovs-tunnel-key-attr + name-prefix: ovs-tunnel-key-attr- + attributes: + - + name: id + type: u64 + byte-order: big-endian + value: 0 + - + name: ipv4-src + type: u32 + byte-order: big-endian + - + name: ipv4-dst + type: u32 + byte-order: big-endian + - + name: tos + type: u8 + - + name: ttl + type: u8 + - + name: dont-fragment + type: flag + - + name: csum + type: flag + - + name: oam + type: flag + - + name: geneve-opts + type: binary + sub-type: u32 + - + name: tp-src + type: u16 + byte-order: big-endian + - + name: tp-dst + type: u16 + byte-order: big-endian + - + name: vxlan-opts + type: nest + nested-attributes: vxlan-ext-attrs + - + name: ipv6-src + type: binary + doc: | + struct in6_addr source IPv6 address + - + name: ipv6-dst + type: binary + doc: | + struct in6_addr destination IPv6 address + - + name: pad + type: binary + - + name: erspan-opts + type: binary + doc: | + struct erspan_metadata + - + name: ipv4-info-bridge + type: flag + - + name: check-pkt-len-attrs + enum-name: ovs-check-pkt-len-attr + name-prefix: ovs-check-pkt-len-attr- + attributes: + - + name: pkt-len + type: u16 + - + name: actions-if-greater + type: nest + nested-attributes: action-attrs + - + name: actions-if-less-equal + type: nest + nested-attributes: action-attrs + - + name: sample-attrs + enum-name: ovs-sample-attr + name-prefix: ovs-sample-attr- + attributes: + - + name: probability + type: u32 + - + name: actions + type: nest + nested-attributes: action-attrs + - + name: userspace-attrs + enum-name: ovs-userspace-attr + name-prefix: ovs-userspace-attr- + attributes: + - + name: pid + type: u32 + - + name: userdata + type: binary + - + name: egress-tun-port + type: u32 + - + name: actions + type: flag + - + name: ovs-nsh-key-attrs + enum-name: ovs-nsh-key-attr + name-prefix: ovs-nsh-key-attr- + attributes: + - + name: base + type: binary + - + name: md1 + type: binary + - + name: md2 + type: binary + - + name: ct-attrs + enum-name: ovs-ct-attr + name-prefix: ovs-ct-attr- + attributes: + - + name: commit + type: flag + - + name: zone + type: u16 + - + name: mark + type: binary + - + name: labels + type: binary + - + name: helper + type: string + - + name: nat + type: nest + nested-attributes: nat-attrs + - + name: force-commit + type: flag + - + name: eventmask + type: u32 + - + name: timeout + type: string + - + name: nat-attrs + enum-name: ovs-nat-attr + name-prefix: ovs-nat-attr- + attributes: + - + name: src + type: flag + - + name: dst + type: flag + - + name: ip-min + type: binary + - + name: ip-max + type: binary + - + name: proto-min + type: u16 + - + name: proto-max + type: u16 + - + name: persistent + type: flag + - + name: proto-hash + type: flag + - + name: proto-random + type: flag + - + name: dec-ttl-attrs + enum-name: ovs-dec-ttl-attr + name-prefix: ovs-dec-ttl-attr- + attributes: + - + name: action + type: nest + nested-attributes: action-attrs + - + name: vxlan-ext-attrs + enum-name: ovs-vxlan-ext- + name-prefix: ovs-vxlan-ext- + attributes: + - + name: gbp + type: u32 + +operations: + name-prefix: ovs-flow-cmd- + fixed-header: ovs-header + list: + - + name: get + doc: Get / dump OVS flow configuration and state + value: 3 + attribute-set: flow-attrs + do: &flow-get-op + request: + attributes: + - dp-ifindex + - key + - ufid + - ufid-flags + reply: + attributes: + - dp-ifindex + - key + - ufid + - mask + - stats + - actions + dump: *flow-get-op + - + name: new + doc: Create OVS flow configuration in a data path + value: 1 + attribute-set: flow-attrs + do: + request: + attributes: + - dp-ifindex + - key + - ufid + - mask + - actions + +mcast-groups: + list: + - + name: ovs_flow diff --git a/Documentation/netlink/specs/ovs_vport.yaml b/Documentation/netlink/specs/ovs_vport.yaml index 8e55622ddf11..17336455bec1 100644 --- a/Documentation/netlink/specs/ovs_vport.yaml +++ b/Documentation/netlink/specs/ovs_vport.yaml @@ -3,6 +3,7 @@ name: ovs_vport version: 2 protocol: genetlink-legacy +uapi-header: linux/openvswitch.h doc: OVS vport configuration over generic netlink. @@ -18,10 +19,13 @@ definitions: - name: vport-type type: enum + enum-name: ovs-vport-type + name-prefix: ovs-vport-type- entries: [ unspec, netdev, internal, gre, vxlan, geneve ] - name: vport-stats type: struct + enum-name: ovs-vport-stats members: - name: rx-packets @@ -51,6 +55,8 @@ definitions: attribute-sets: - name: vport-options + enum-name: ovs-vport-options + name-prefix: ovs-tunnel-attr- attributes: - name: dst-port @@ -60,6 +66,8 @@ attribute-sets: type: u32 - name: upcall-stats + enum-name: ovs-vport-upcall-attr + name-prefix: ovs-vport-upcall-attr- attributes: - name: success @@ -70,6 +78,8 @@ attribute-sets: type: u64 - name: vport + name-prefix: ovs-vport-attr- + enum-name: ovs-vport-attr attributes: - name: port-no @@ -108,9 +118,10 @@ attribute-sets: nested-attributes: upcall-stats operations: + name-prefix: ovs-vport-cmd- list: - - name: vport-get + name: get doc: Get / dump OVS vport configuration and state value: 3 attribute-set: vport diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 247c6c4127e9..1cc35de336a4 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the application to use. The final option is the flags field, but it will be dealt with in separate sections for each UMEM flag. +SO_BINDTODEVICE setsockopt +-------------------------- + +This is a generic SOL_SOCKET option that can be used to tie AF_XDP +socket to a particular network interface. It is useful when a socket +is created by a privileged process and passed to a non-privileged one. +Once the option is set, kernel will refuse attempts to bind that socket +to a different interface. Updating the value requires CAP_NET_RAW. + XDP_STATISTICS getsockopt ------------------------- diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index adc4bf4f3c50..28925e19622d 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -776,10 +776,11 @@ peer_notif_delay Specify the delay, in milliseconds, between each peer notification (gratuitous ARP and unsolicited IPv6 Neighbor Advertisement) when they are issued after a failover event. - This delay should be a multiple of the link monitor interval - (arp_interval or miimon, whichever is active). The default - value is 0 which means to match the value of the link monitor - interval. + This delay should be a multiple of the MII link monitor interval + (miimon). + + The valid range is 0 - 300000. The default value is 0, which means + to match the value of the MII link monitor interval. prio Slave priority. A higher number means higher priority. diff --git a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst index 4118384cf8eb..289c146a8291 100644 --- a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst +++ b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst @@ -190,8 +190,7 @@ MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad... 3. Userspace configuration ========================== -rmnet userspace configuration is done through netlink library librmnetctl -and command line utility rmnetcli. Utility is hosted in codeaurora forum git. -The driver uses rtnl_link_ops for communication. +rmnet userspace configuration is done through netlink using iproute2 +https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/ -https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl +The driver uses rtnl_link_ops for communication. diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index 8bcb173e0353..5eaa3ab6c73e 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -38,6 +38,7 @@ debug logs. Some of the ENA devices support a working mode called Low-latency Queue (LLQ), which saves several more microseconds. + ENA Source Code Directory Structure =================================== @@ -205,6 +206,8 @@ Adaptive coalescing can be switched on/off through `ethtool(8)`'s More information about Adaptive Interrupt Moderation (DIM) can be found in Documentation/networking/net_dim.rst +.. _`RX copybreak`: + RX copybreak ============ The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK @@ -315,3 +318,34 @@ Rx - The new SKB is updated with the necessary information (protocol, checksum hw verify result, etc), and then passed to the network stack, using the NAPI interface function :code:`napi_gro_receive()`. + +Dynamic RX Buffers (DRB) +------------------------ + +Each RX descriptor in the RX ring is a single memory page (which is either 4KB +or 16KB long depending on system's configurations). +To reduce the memory allocations required when dealing with a high rate of small +packets, the driver tries to reuse the remaining RX descriptor's space if more +than 2KB of this page remain unused. + +A simple example of this mechanism is the following sequence of events: + +:: + + 1. Driver allocates page-sized RX buffer and passes it to hardware + +----------------------+ + |4KB RX Buffer | + +----------------------+ + + 2. A 300Bytes packet is received on this buffer + + 3. The driver increases the ref count on this page and returns it back to + HW as an RX buffer of size 4KB - 300Bytes = 3796 Bytes + +----+--------------------+ + |****|3796 Bytes RX Buffer| + +----+--------------------+ + +This mechanism isn't used when an XDP program is loaded, or when the +RX packet is less than rx_copybreak bytes (in which case the packet is +copied out of the RX buffer into the linear part of a new skb allocated +for it and the RX buffer remains the same size, see `RX copybreak`_). diff --git a/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst b/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst new file mode 100644 index 000000000000..587927d3de92 --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst @@ -0,0 +1,85 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. note: can be edited and viewed with /usr/bin/formiko-vim + +========================================================== +PCI vDPA driver for the AMD/Pensando(R) DSC adapter family +========================================================== + +AMD/Pensando vDPA VF Device Driver + +Copyright(c) 2023 Advanced Micro Devices, Inc + +Overview +======== + +The ``pds_vdpa`` driver is an auxiliary bus driver that supplies +a vDPA device for use by the virtio network stack. It is used with +the Pensando Virtual Function devices that offer vDPA and virtio queue +services. It depends on the ``pds_core`` driver and hardware for the PF +and VF PCI handling as well as for device configuration services. + +Using the device +================ + +The ``pds_vdpa`` device is enabled via multiple configuration steps and +depends on the ``pds_core`` driver to create and enable SR-IOV Virtual +Function devices. After the VFs are enabled, we enable the vDPA service +in the ``pds_core`` device to create the auxiliary devices used by pds_vdpa. + +Example steps: + +.. code-block:: bash + + #!/bin/bash + + modprobe pds_core + modprobe vdpa + modprobe pds_vdpa + + PF_BDF=`ls /sys/module/pds_core/drivers/pci\:pds_core/*/sriov_numvfs | awk -F / '{print $7}'` + + # Enable vDPA VF auxiliary device(s) in the PF + devlink dev param set pci/$PF_BDF name enable_vnet cmode runtime value true + + # Create a VF for vDPA use + echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs + + # Find the vDPA services/devices available + PDS_VDPA_MGMT=`vdpa mgmtdev show | grep vDPA | head -1 | cut -d: -f1` + + # Create a vDPA device for use in virtio network configurations + vdpa dev add name vdpa1 mgmtdev $PDS_VDPA_MGMT mac 00:11:22:33:44:55 + + # Set up an ethernet interface on the vdpa device + modprobe virtio_vdpa + + + +Enabling the driver +=================== + +The driver is enabled via the standard kernel configuration system, +using the make command:: + + make oldconfig/menuconfig/etc. + +The driver is located in the menu structure at: + + -> Device Drivers + -> Network device support (NETDEVICES [=y]) + -> Ethernet driver support + -> Pensando devices + -> Pensando Ethernet PDS_VDPA Support + +Support +======= + +For general Linux networking support, please use the netdev mailing +list, which is monitored by Pensando personnel:: + + netdev@vger.kernel.org + +For more specific support needs, please use the Pensando driver support +email:: + + drivers@pensando.io diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 417ca514a4d0..94ecb67c0885 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -15,6 +15,7 @@ Contents: amazon/ena altera/altera_tse amd/pds_core + amd/pds_vdpa aquantia/atlantic chelsio/cxgb cirrus/cs89x0 diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index 69695e5511f4..e4d065c55ea8 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -84,24 +84,6 @@ Once the VM shuts down, or otherwise releases the VF, the command will complete. -Important notes for SR-IOV and Link Aggregation ------------------------------------------------ -Link Aggregation is mutually exclusive with SR-IOV. - -- If Link Aggregation is active, SR-IOV VFs cannot be created on the PF. -- If SR-IOV is active, you cannot set up Link Aggregation on the interface. - -Bridging and MACVLAN are also affected by this. If you wish to use bridging or -MACVLAN with SR-IOV, you must set up bridging or MACVLAN before enabling -SR-IOV. If you are using bridging or MACVLAN in conjunction with SR-IOV, and -you want to remove the interface from the bridge or MACVLAN, you must follow -these steps: - -1. Destroy SR-IOV VFs if they exist -2. Remove the interface from the bridge or MACVLAN -3. Recreate SRIOV VFs as needed - - Additional Features and Configurations ====================================== diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst index 5ba9015336e2..bfd233cfac35 100644 --- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst @@ -13,6 +13,7 @@ Contents - `Drivers`_ - `Basic packet flow`_ - `Devlink health reporters`_ +- `Quality of service`_ Overview ======== @@ -287,3 +288,47 @@ For example:: NIX_AF_ERR: NIX Error Interrupt Reg : 64 Rx on unmapped PF_FUNC + + +Quality of service +================== + + +Hardware algorithms used in scheduling +-------------------------------------- + +octeontx2 silicon and CN10K transmit interface consists of five transmit levels +starting from SMQ/MDQ, TL4 to TL1. Each packet will traverse MDQ, TL4 to TL1 +levels. Each level contains an array of queues to support scheduling and shaping. +The hardware uses the below algorithms depending on the priority of scheduler queues. +once the usercreates tc classes with different priorities, the driver configures +schedulers allocated to the class with specified priority along with rate-limiting +configuration. + +1. Strict Priority + + - Once packets are submitted to MDQ, hardware picks all active MDQs having different priority + using strict priority. + +2. Round Robin + + - Active MDQs having the same priority level are chosen using round robin. + + +Setup HTB offload +----------------- + +1. Enable HW TC offload on the interface:: + + # ethtool -K <interface> hw-tc-offload on + +2. Crate htb root:: + + # tc qdisc add dev <interface> clsact + # tc qdisc replace dev <interface> root handle 1: htb offload + +3. Create tc classes with different priorities:: + + # tc class add dev <interface> parent 1: classid 1:1 htb rate 10Gbit prio 1 + + # tc class add dev <interface> parent 1: classid 1:2 htb rate 10Gbit prio 7 diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst index 6b2d1fe74ecf..a395df9c2751 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst @@ -797,6 +797,16 @@ Counters on the NIC port that is connected to a eSwitch. RoCE/UD/RC traffic) [#accel]_. - Acceleration + * - `vport_loopback_packets` + - Unicast, multicast and broadcast packets that were loop-back (received + and transmitted), IB/Eth [#accel]_. + - Acceleration + + * - `vport_loopback_bytes` + - Unicast, multicast and broadcast bytes that were loop-back (received + and transmitted), IB/Eth [#accel]_. + - Acceleration + * - `rx_steer_missed_packets` - Number of packets that was received by the NIC, however was discarded because it did not match any flow in the NIC flow table. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst index 3a7a714cc08f..a4edf908b707 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst @@ -40,6 +40,7 @@ flow_steering_mode: Device flow steering mode --------------------------------------------- The flow steering mode parameter controls the flow steering mode of the driver. Two modes are supported: + 1. 'dmfs' - Device managed flow steering. 2. 'smfs' - Software/Driver managed flow steering. @@ -99,6 +100,7 @@ between representors and stacked devices. By default metadata is enabled on the supported devices in E-switch. Metadata is applicable only for E-switch in switchdev mode and users may disable it when NONE of the below use cases will be in use: + 1. HCA is in Dual/multi-port RoCE mode. 2. VF/SF representor bonding (Usually used for Live migration) 3. Stacked devices @@ -180,7 +182,8 @@ User commands examples: $ devlink health diagnose pci/0000:82:00.0 reporter tx -NOTE: This command has valid output only when interface is up, otherwise the command has empty output. +.. note:: + This command has valid output only when interface is up, otherwise the command has empty output. - Show number of tx errors indicated, number of recover flows ended successfully, is autorecover enabled and graceful period from last recover:: @@ -232,8 +235,9 @@ User commands examples: $ devlink health dump show pci/0000:82:00.0 reporter fw -NOTE: This command can run only on the PF which has fw tracer ownership, -running it on other PF or any VF will return "Operation not permitted". +.. note:: + This command can run only on the PF which has fw tracer ownership, + running it on other PF or any VF will return "Operation not permitted". fw fatal reporter ----------------- @@ -256,7 +260,8 @@ User commands examples: $ devlink health dump show pci/0000:82:00.1 reporter fw_fatal -NOTE: This command can run only on PF. +.. note:: + This command can run only on PF. vnic reporter ------------- @@ -265,28 +270,44 @@ It is responsible for querying the vnic diagnostic counters from fw and displayi them in realtime. Description of the vnic counters: -total_q_under_processor_handle: number of queues in an error state due to -an async error or errored command. -send_queue_priority_update_flow: number of QP/SQ priority/SL update -events. -cq_overrun: number of times CQ entered an error state due to an -overflow. -async_eq_overrun: number of times an EQ mapped to async events was -overrun. -comp_eq_overrun: number of times an EQ mapped to completion events was -overrun. -quota_exceeded_command: number of commands issued and failed due to quota -exceeded. -invalid_command: number of commands issued and failed dues to any reason -other than quota exceeded. -nic_receive_steering_discard: number of packets that completed RX flow -steering but were discarded due to a mismatch in flow table. + +- total_q_under_processor_handle + number of queues in an error state due to + an async error or errored command. +- send_queue_priority_update_flow + number of QP/SQ priority/SL update events. +- cq_overrun + number of times CQ entered an error state due to an overflow. +- async_eq_overrun + number of times an EQ mapped to async events was overrun. + comp_eq_overrun number of times an EQ mapped to completion events was + overrun. +- quota_exceeded_command + number of commands issued and failed due to quota exceeded. +- invalid_command + number of commands issued and failed dues to any reason other than quota + exceeded. +- nic_receive_steering_discard + number of packets that completed RX flow + steering but were discarded due to a mismatch in flow table. +- generated_pkt_steering_fail + number of packets generated by the VNIC experiencing unexpected steering + failure (at any point in steering flow). +- handled_pkt_steering_fail + number of packets handled by the VNIC experiencing unexpected steering + failure (at any point in steering flow owned by the VNIC, including the FDB + for the eswitch owner). User commands examples: -- Diagnose PF/VF vnic counters + +- Diagnose PF/VF vnic counters:: + $ devlink health diagnose pci/0000:82:00.1 reporter vnic + - Diagnose representor vnic counters (performed by supplying devlink port of the - representor, which can be obtained via devlink port command) + representor, which can be obtained via devlink port command):: + $ devlink health diagnose pci/0000:82:00.1/65537 reporter vnic -NOTE: This command can run over all interfaces such as PF/VF and representor ports. +.. note:: + This command can run over all interfaces such as PF/VF and representor ports. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst index 01deedb71597..6e3f5ee8b0d0 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst @@ -45,6 +45,28 @@ Following bridge VLAN functions are supported by mlx5: Subfunction =========== +Subfunction which are spawned over the E-switch are created only with devlink +device, and by default all the SF auxiliary devices are disabled. +This will allow user to configure the SF before the SF have been fully probed, +which will save time. + +Usage example: + +- Create SF:: + + $ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11 + $ devlink port function set pci/0000:08:00.0/32768 hw_addr 00:00:00:00:00:11 state active + +- Enable ETH auxiliary device:: + + $ devlink dev param set auxiliary/mlx5_core.sf.1 name enable_eth value true cmode driverinit + +- Now, in order to fully probe the SF, use devlink reload:: + + $ devlink dev reload auxiliary/mlx5_core.sf.1 + +mlx5 supports ETH,rdma and vdpa (vnet) auxiliary devices devlink params (see :ref:`Documentation/networking/devlink/devlink-params.rst <devlink_params_generic>`). + mlx5 supports subfunction management using devlink port (see :ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>`) interface. A subfunction has its own function capabilities and its own resources. This diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index a164ff074356..5b75c3f7a137 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -116,8 +116,8 @@ Contents: udplite vrf vxlan - x25-iface x25 + x25-iface xfrm_device xfrm_proc xfrm_sync diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 6ec06a33688a..4a010a7cde7f 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -881,9 +881,10 @@ tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt will be retransmitted. Should not be higher than 127. Default value - is 6, which corresponds to 63seconds till the last retransmission - with the current initial RTO of 1second. With this the final timeout - for an active TCP connection attempt will happen after 127seconds. + is 6, which corresponds to 67seconds (with tcp_syn_linear_timeouts = 4) + till the last retransmission with the current initial RTO of 1second. + With this the final timeout for an active TCP connection attempt + will happen after 131seconds. tcp_timestamps - INTEGER Enable timestamps as defined in RFC1323. @@ -946,6 +947,16 @@ tcp_pacing_ca_ratio - INTEGER Default: 120 +tcp_syn_linear_timeouts - INTEGER + The number of times for an active TCP connection to retransmit SYNs with + a linear backoff timeout before defaulting to an exponential backoff + timeout. This has no effect on SYNACK at the passive TCP side. + + With an initial RTO of 1 and tcp_syn_linear_timeouts = 4 we would + expect SYN RTOs to be: 1, 1, 1, 1, 1, 2, 4, ... (4 linear timeouts, + and the first exponential backoff using 2^0 * initial_RTO). + Default: 4 + tcp_tso_win_divisor - INTEGER This allows control over what percentage of the congestion window can be consumed by a single TSO frame. @@ -970,6 +981,21 @@ tcp_tw_reuse - INTEGER tcp_window_scaling - BOOLEAN Enable window scaling as defined in RFC1323. +tcp_shrink_window - BOOLEAN + This changes how the TCP receive window is calculated. + + RFC 7323, section 2.4, says there are instances when a retracted + window can be offered, and that TCP implementations MUST ensure + that they handle a shrinking window, as specified in RFC 1122. + + - 0 - Disabled. The window is never shrunk. + - 1 - Enabled. The window is shrunk when necessary to remain within + the memory limit set by autotuning (sk_rcvbuf). + This only occurs if a non-zero receive window + scaling factor is also in effect. + + Default: 0 + tcp_wmem - vector of 3 INTEGERs: min, default, max min: Amount of memory reserved for send buffers for TCP sockets. Each TCP socket has rights to use it due to fact of its birth. @@ -1352,8 +1378,8 @@ ping_group_range - 2 INTEGERS Restrict ICMP_PROTO datagram sockets to users in the group range. The default is "1 0", meaning, that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions - to the single group. "0 4294967295" would enable it for the world, "100 - 4294967295" would enable it for the users, but not daemons. + to the single group. "0 4294967294" would enable it for the world, "100 + 4294967294" would enable it for the users, but not daemons. tcp_early_demux - BOOLEAN Enable early demux for established TCP sockets. diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst index 3d435caa3ef2..92c9fb46d6a2 100644 --- a/Documentation/networking/scaling.rst +++ b/Documentation/networking/scaling.rst @@ -269,8 +269,8 @@ a single application thread handles flows with many different flow hashes. rps_sock_flow_table is a global flow table that contains the *desired* CPU for flows: the CPU that is currently processing the flow in userspace. Each table value is a CPU index that is updated during calls to recvmsg -and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage() -and tcp_splice_read()). +and sendmsg (specifically, inet_recvmsg(), inet_sendmsg() and +tcp_splice_read()). When the scheduler moves a thread to a new CPU while it has outstanding receive packets on the old CPU, packets may arrive out of order. To diff --git a/Documentation/networking/tls-handshake.rst b/Documentation/networking/tls-handshake.rst index a2817a88e905..6f5ea1646a47 100644 --- a/Documentation/networking/tls-handshake.rst +++ b/Documentation/networking/tls-handshake.rst @@ -53,6 +53,7 @@ fills in a structure that contains the parameters of the request: struct socket *ta_sock; tls_done_func_t ta_done; void *ta_data; + const char *ta_peername; unsigned int ta_timeout_ms; key_serial_t ta_keyring; key_serial_t ta_my_cert; @@ -71,6 +72,10 @@ instantiated a struct file in sock->file. has completed. Further explanation of this function is in the "Handshake Completion" sesction below. +The consumer can provide a NUL-terminated hostname in the @ta_peername +field that is sent as part of ClientHello. If no peername is provided, +the DNS hostname associated with the server's IP address is used instead. + The consumer can fill in the @ta_timeout_ms field to force the servicing handshake agent to exit after a number of milliseconds. This enables the socket to be fully closed once both the kernel and the handshake agent diff --git a/Documentation/networking/x25-iface.rst b/Documentation/networking/x25-iface.rst index f34e9ec64937..285cefcfce87 100644 --- a/Documentation/networking/x25-iface.rst +++ b/Documentation/networking/x25-iface.rst @@ -1,8 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 -============================- X.25 Device Driver Interface -============================- +============================ Version 1.1 diff --git a/Documentation/pcmcia/index.rst b/Documentation/pcmcia/index.rst index 7ae1f62fca14..8067236c51ab 100644 --- a/Documentation/pcmcia/index.rst +++ b/Documentation/pcmcia/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ====== -pcmcia +PCMCIA ====== .. toctree:: diff --git a/Documentation/powerpc/dexcr.rst b/Documentation/powerpc/dexcr.rst new file mode 100644 index 000000000000..615a631f51fa --- /dev/null +++ b/Documentation/powerpc/dexcr.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +========================================== +DEXCR (Dynamic Execution Control Register) +========================================== + +Overview +======== + +The DEXCR is a privileged special purpose register (SPR) introduced in +PowerPC ISA 3.1B (Power10) that allows per-cpu control over several dynamic +execution behaviours. These behaviours include speculation (e.g., indirect +branch target prediction) and enabling return-oriented programming (ROP) +protection instructions. + +The execution control is exposed in hardware as up to 32 bits ('aspects') in +the DEXCR. Each aspect controls a certain behaviour, and can be set or cleared +to enable/disable the aspect. There are several variants of the DEXCR for +different purposes: + +DEXCR + A privileged SPR that can control aspects for userspace and kernel space +HDEXCR + A hypervisor-privileged SPR that can control aspects for the hypervisor and + enforce aspects for the kernel and userspace. +UDEXCR + An optional ultravisor-privileged SPR that can control aspects for the ultravisor. + +Userspace can examine the current DEXCR state using a dedicated SPR that +provides a non-privileged read-only view of the userspace DEXCR aspects. +There is also an SPR that provides a read-only view of the hypervisor enforced +aspects, which ORed with the userspace DEXCR view gives the effective DEXCR +state for a process. + + +Configuration +============= + +The DEXCR is currently unconfigurable. All threads are run with the +NPHIE aspect enabled. + + +coredump and ptrace +=================== + +The userspace values of the DEXCR and HDEXCR (in this order) are exposed under +``NT_PPC_DEXCR``. These are each 64 bits and readonly, and are intended to +assist with core dumps. The DEXCR may be made writable in future. The top 32 +bits of both registers (corresponding to the non-userspace bits) are masked off. + +If the kernel config ``CONFIG_CHECKPOINT_RESTORE`` is enabled, then +``NT_PPC_HASHKEYR`` is available and exposes the HASHKEYR value of the process +for reading and writing. This is a tradeoff between increased security and +checkpoint/restore support: a process should normally have no need to know its +secret key, but restoring a process requires setting its original key. The key +therefore appears in core dumps, and an attacker may be able to retrieve it from +a coredump and effectively bypass ROP protection on any threads that share this +key (potentially all threads from the same parent that have not run ``exec()``). diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst index 85e80e30160b..d33b554ca7ba 100644 --- a/Documentation/powerpc/index.rst +++ b/Documentation/powerpc/index.rst @@ -15,6 +15,7 @@ powerpc cxl cxlflash dawr-power9 + dexcr dscr eeh-pci-error-recovery elf_hwcaps diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index 6a919cffcbfd..613a01da4717 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -434,9 +434,10 @@ There are a few hints which can help with linux-kernel survival: questions. Some developers can get impatient with people who clearly have not done their homework. -- Avoid top-posting (the practice of putting your answer above the quoted - text you are responding to). It makes your response harder to read and - makes a poor impression. +- Use interleaved ("inline") replies, which makes your response easier to + read. (i.e. avoid top-posting -- the practice of putting your answer above + the quoted text you are responding to.) For more details, see + :ref:`Documentation/process/submitting-patches.rst <interleaved_replies>`. - Ask on the correct mailing list. Linux-kernel may be the general meeting point, but it is not the best place to find developers from all diff --git a/Documentation/process/6.Followthrough.rst b/Documentation/process/6.Followthrough.rst index a173cd5f93d2..66fa400c6d94 100644 --- a/Documentation/process/6.Followthrough.rst +++ b/Documentation/process/6.Followthrough.rst @@ -51,6 +51,13 @@ mind: working toward the creation of the best kernel they can; they are not trying to create discomfort for their employers' competitors. + - Be prepared for seemingly silly requests for coding style changes + and requests to factor out some of your code to shared parts of + the kernel. One job the maintainers do is to keep things looking + the same. Sometimes this means that the clever hack in your driver + to get around a problem actually needs to become a generalized + kernel feature ready for next time. + What all of this comes down to is that, when reviewers send you comments, you need to pay attention to the technical observations that they are making. Do not let their form of expression or your own pride keep that diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index ef540865ad22..5561dae94f85 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils. ====================== =============== ======================================== GNU C 5.1 gcc --version Clang/LLVM (optional) 11.0.0 clang --version -Rust (optional) 1.62.0 rustc --version +Rust (optional) 1.68.2 rustc --version bindgen (optional) 0.56.0 bindgen --version GNU make 3.82 make --version bash 4.2 bash --version @@ -60,6 +60,8 @@ openssl & libcrypto 1.0.0 openssl version bc 1.06.95 bc --version Sphinx\ [#f1]_ 1.7 sphinx-build --version cpio any cpio --version +GNU tar 1.28 tar --version +gtags (optional) 6.6.5 gtags --version ====================== =============== ======================================== .. [#f1] Sphinx is needed only to build the Kernel documentation @@ -174,6 +176,18 @@ You will need openssl to build kernels 3.7 and higher if module signing is enabled. You will also need openssl development packages to build kernels 4.3 and higher. +Tar +--- + +GNU tar is needed if you want to enable access to the kernel headers via sysfs +(CONFIG_IKHEADERS). + +gtags / GNU GLOBAL (optional) +----------------------------- + +The kernel build requires GNU GLOBAL version 6.6.5 or later to generate +tag files through ``make gtags``. This is due to its use of the gtags +``-C (--directory)`` flag. System utilities **************** diff --git a/Documentation/process/handling-regressions.rst b/Documentation/process/handling-regressions.rst index abb741b1aeee..5d3c3de3f4ec 100644 --- a/Documentation/process/handling-regressions.rst +++ b/Documentation/process/handling-regressions.rst @@ -129,88 +129,132 @@ tools and scripts used by other kernel developers or Linux distributions; one of these tools is regzbot, which heavily relies on the "Link:" tags to associate reports for regression with changes resolving them. -Prioritize work on fixing regressions -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -You should fix any reported regression as quickly as possible, to provide -affected users with a solution in a timely manner and prevent more users from -running into the issue; nevertheless developers need to take enough time and -care to ensure regression fixes do not cause additional damage. - -In the end though, developers should give their best to prevent users from -running into situations where a regression leaves them only three options: "run -a kernel with a regression that seriously impacts usage", "continue running an -outdated and thus potentially insecure kernel version for more than two weeks -after a regression's culprit was identified", and "downgrade to a still -supported kernel series that lack required features". - -How to realize this depends a lot on the situation. Here are a few rules of -thumb for you, in order or importance: - - * Prioritize work on handling regression reports and fixing regression over all - other Linux kernel work, unless the latter concerns acute security issues or - bugs causing data loss or damage. - - * Always consider reverting the culprit commits and reapplying them later - together with necessary fixes, as this might be the least dangerous and - quickest way to fix a regression. - - * Developers should handle regressions in all supported kernel series, but are - free to delegate the work to the stable team, if the issue probably at no - point in time occurred with mainline. - - * Try to resolve any regressions introduced in the current development before - its end. If you fear a fix might be too risky to apply only days before a new - mainline release, let Linus decide: submit the fix separately to him as soon - as possible with the explanation of the situation. He then can make a call - and postpone the release if necessary, for example if multiple such changes - show up in his inbox. - - * Address regressions in stable, longterm, or proper mainline releases with - more urgency than regressions in mainline pre-releases. That changes after - the release of the fifth pre-release, aka "-rc5": mainline then becomes as - important, to ensure all the improvements and fixes are ideally tested - together for at least one week before Linus releases a new mainline version. - - * Fix regressions within two or three days, if they are critical for some - reason -- for example, if the issue is likely to affect many users of the - kernel series in question on all or certain architectures. Note, this - includes mainline, as issues like compile errors otherwise might prevent many - testers or continuous integration systems from testing the series. - - * Aim to fix regressions within one week after the culprit was identified, if - the issue was introduced in either: - - * a recent stable/longterm release - - * the development cycle of the latest proper mainline release - - In the latter case (say Linux v5.14), try to address regressions even - quicker, if the stable series for the predecessor (v5.13) will be abandoned - soon or already was stamped "End-of-Life" (EOL) -- this usually happens about - three to four weeks after a new mainline release. - - * Try to fix all other regressions within two weeks after the culprit was - found. Two or three additional weeks are acceptable for performance - regressions and other issues which are annoying, but don't prevent anyone - from running Linux (unless it's an issue in the current development cycle, - as those should ideally be addressed before the release). A few weeks in - total are acceptable if a regression can only be fixed with a risky change - and at the same time is affecting only a few users; as much time is - also okay if the regression is already present in the second newest longterm - kernel series. - -Note: The aforementioned time frames for resolving regressions are meant to -include getting the fix tested, reviewed, and merged into mainline, ideally with -the fix being in linux-next at least briefly. This leads to delays you need to -account for. - -Subsystem maintainers are expected to assist in reaching those periods by doing -timely reviews and quick handling of accepted patches. They thus might have to -send git-pull requests earlier or more often than usual; depending on the fix, -it might even be acceptable to skip testing in linux-next. Especially fixes for -regressions in stable and longterm kernels need to be handled quickly, as fixes -need to be merged in mainline before they can be backported to older series. +Expectations and best practices for fixing regressions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As a Linux kernel developer, you are expected to give your best to prevent +situations where a regression caused by a recent change of yours leaves users +only these options: + + * Run a kernel with a regression that impacts usage. + + * Switch to an older or newer kernel series. + + * Continue running an outdated and thus potentially insecure kernel for more + than three weeks after the regression's culprit was identified. Ideally it + should be less than two. And it ought to be just a few days, if the issue is + severe or affects many users -- either in general or in prevalent + environments. + +How to realize that in practice depends on various factors. Use the following +rules of thumb as a guide. + +In general: + + * Prioritize work on regressions over all other Linux kernel work, unless the + latter concerns a severe issue (e.g. acute security vulnerability, data loss, + bricked hardware, ...). + + * Expedite fixing mainline regressions that recently made it into a proper + mainline, stable, or longterm release (either directly or via backport). + + * Do not consider regressions from the current cycle as something that can wait + till the end of the cycle, as the issue might discourage or prevent users and + CI systems from testing mainline now or generally. + + * Work with the required care to avoid additional or bigger damage, even if + resolving an issue then might take longer than outlined below. + +On timing once the culprit of a regression is known: + + * Aim to mainline a fix within two or three days, if the issue is severe or + bothering many users -- either in general or in prevalent conditions like a + particular hardware environment, distribution, or stable/longterm series. + + * Aim to mainline a fix by Sunday after the next, if the culprit made it + into a recent mainline, stable, or longterm release (either directly or via + backport); if the culprit became known early during a week and is simple to + resolve, try to mainline the fix within the same week. + + * For other regressions, aim to mainline fixes before the hindmost Sunday + within the next three weeks. One or two Sundays later are acceptable, if the + regression is something people can live with easily for a while -- like a + mild performance regression. + + * It's strongly discouraged to delay mainlining regression fixes till the next + merge window, except when the fix is extraordinarily risky or when the + culprit was mainlined more than a year ago. + +On procedure: + + * Always consider reverting the culprit, as it's often the quickest and least + dangerous way to fix a regression. Don't worry about mainlining a fixed + variant later: that should be straight-forward, as most of the code went + through review once already. + + * Try to resolve any regressions introduced in mainline during the past + twelve months before the current development cycle ends: Linus wants such + regressions to be handled like those from the current cycle, unless fixing + bears unusual risks. + + * Consider CCing Linus on discussions or patch review, if a regression seems + tangly. Do the same in precarious or urgent cases -- especially if the + subsystem maintainer might be unavailable. Also CC the stable team, when you + know such a regression made it into a mainline, stable, or longterm release. + + * For urgent regressions, consider asking Linus to pick up the fix straight + from the mailing list: he is totally fine with that for uncontroversial + fixes. Ideally though such requests should happen in accordance with the + subsystem maintainers or come directly from them. + + * In case you are unsure if a fix is worth the risk applying just days before + a new mainline release, send Linus a mail with the usual lists and people in + CC; in it, summarize the situation while asking him to consider picking up + the fix straight from the list. He then himself can make the call and when + needed even postpone the release. Such requests again should ideally happen + in accordance with the subsystem maintainers or come directly from them. + +Regarding stable and longterm kernels: + + * You are free to leave regressions to the stable team, if they at no point in + time occurred with mainline or were fixed there already. + + * If a regression made it into a proper mainline release during the past + twelve months, ensure to tag the fix with "Cc: stable@vger.kernel.org", as a + "Fixes:" tag alone does not guarantee a backport. Please add the same tag, + in case you know the culprit was backported to stable or longterm kernels. + + * When receiving reports about regressions in recent stable or longterm kernel + series, please evaluate at least briefly if the issue might happen in current + mainline as well -- and if that seems likely, take hold of the report. If in + doubt, ask the reporter to check mainline. + + * Whenever you want to swiftly resolve a regression that recently also made it + into a proper mainline, stable, or longterm release, fix it quickly in + mainline; when appropriate thus involve Linus to fast-track the fix (see + above). That's because the stable team normally does neither revert nor fix + any changes that cause the same problems in mainline. + + * In case of urgent regression fixes you might want to ensure prompt + backporting by dropping the stable team a note once the fix was mainlined; + this is especially advisable during merge windows and shortly thereafter, as + the fix otherwise might land at the end of a huge patch queue. + +On patch flow: + + * Developers, when trying to reach the time periods mentioned above, remember + to account for the time it takes to get fixes tested, reviewed, and merged by + Linus, ideally with them being in linux-next at least briefly. Hence, if a + fix is urgent, make it obvious to ensure others handle it appropriately. + + * Reviewers, you are kindly asked to assist developers in reaching the time + periods mentioned above by reviewing regression fixes in a timely manner. + + * Subsystem maintainers, you likewise are encouraged to expedite the handling + of regression fixes. Thus evaluate if skipping linux-next is an option for + the particular fix. Also consider sending git pull requests more often than + usual when needed. And try to avoid holding onto regression fixes over + weekends -- especially when the fix is marked for backporting. More aspects regarding regressions developers should be aware of diff --git a/Documentation/process/maintainer-handbooks.rst b/Documentation/process/maintainer-handbooks.rst index d783060b4cc6..9992bfd7eaa3 100644 --- a/Documentation/process/maintainer-handbooks.rst +++ b/Documentation/process/maintainer-handbooks.rst @@ -15,5 +15,7 @@ Contents: :numbered: :maxdepth: 2 - maintainer-tip maintainer-netdev + maintainer-soc + maintainer-tip + maintainer-kvm-x86 diff --git a/Documentation/process/maintainer-kvm-x86.rst b/Documentation/process/maintainer-kvm-x86.rst new file mode 100644 index 000000000000..9183bd449762 --- /dev/null +++ b/Documentation/process/maintainer-kvm-x86.rst @@ -0,0 +1,390 @@ +.. SPDX-License-Identifier: GPL-2.0 + +KVM x86 +======= + +Foreword +-------- +KVM strives to be a welcoming community; contributions from newcomers are +valued and encouraged. Please do not be discouraged or intimidated by the +length of this document and the many rules/guidelines it contains. Everyone +makes mistakes, and everyone was a newbie at some point. So long as you make +an honest effort to follow KVM x86's guidelines, are receptive to feedback, +and learn from any mistakes you make, you will be welcomed with open arms, not +torches and pitchforks. + +TL;DR +----- +Testing is mandatory. Be consistent with established styles and patterns. + +Trees +----- +KVM x86 is currently in a transition period from being part of the main KVM +tree, to being "just another KVM arch". As such, KVM x86 is split across the +main KVM tree, ``git.kernel.org/pub/scm/virt/kvm/kvm.git``, and a KVM x86 +specific tree, ``github.com/kvm-x86/linux.git``. + +Generally speaking, fixes for the current cycle are applied directly to the +main KVM tree, while all development for the next cycle is routed through the +KVM x86 tree. In the unlikely event that a fix for the current cycle is routed +through the KVM x86 tree, it will be applied to the ``fixes`` branch before +making its way to the main KVM tree. + +Note, this transition period is expected to last quite some time, i.e. will be +the status quo for the foreseeable future. + +Branches +~~~~~~~~ +The KVM x86 tree is organized into multiple topic branches. The purpose of +using finer-grained topic branches is to make it easier to keep tabs on an area +of development, and to limit the collateral damage of human errors and/or buggy +commits, e.g. dropping the HEAD commit of a topic branch has no impact on other +in-flight commits' SHA1 hashes, and having to reject a pull request due to bugs +delays only that topic branch. + +All topic branches, except for ``next`` and ``fixes``, are rolled into ``next`` +via a Cthulhu merge on an as-needed basis, i.e. when a topic branch is updated. +As a result, force pushes to ``next`` are common. + +Lifecycle +~~~~~~~~~ +Fixes that target the current release, a.k.a. mainline, are typically applied +directly to the main KVM tree, i.e. do not route through the KVM x86 tree. + +Changes that target the next release are routed through the KVM x86 tree. Pull +requests (from KVM x86 to main KVM) are sent for each KVM x86 topic branch, +typically the week before Linus' opening of the merge window, e.g. the week +following rc7 for "normal" releases. If all goes well, the topic branches are +rolled into the main KVM pull request sent during Linus' merge window. + +The KVM x86 tree doesn't have its own official merge window, but there's a soft +close around rc5 for new features, and a soft close around rc6 for fixes (for +the next release; see above for fixes that target the current release). + +Timeline +~~~~~~~~ +Submissions are typically reviewed and applied in FIFO order, with some wiggle +room for the size of a series, patches that are "cache hot", etc. Fixes, +especially for the current release and or stable trees, get to jump the queue. +Patches that will be taken through a non-KVM tree (most often through the tip +tree) and/or have other acks/reviews also jump the queue to some extent. + +Note, the vast majority of review is done between rc1 and rc6, give or take. +The period between rc6 and the next rc1 is used to catch up on other tasks, +i.e. radio silence during this period isn't unusual. + +Pings to get a status update are welcome, but keep in mind the timing of the +current release cycle and have realistic expectations. If you are pinging for +acceptance, i.e. not just for feedback or an update, please do everything you +can, within reason, to ensure that your patches are ready to be merged! Pings +on series that break the build or fail tests lead to unhappy maintainers! + +Development +----------- + +Base Tree/Branch +~~~~~~~~~~~~~~~~ +Fixes that target the current release, a.k.a. mainline, should be based on +``git://git.kernel.org/pub/scm/virt/kvm/kvm.git master``. Note, fixes do not +automatically warrant inclusion in the current release. There is no singular +rule, but typically only fixes for bugs that are urgent, critical, and/or were +introduced in the current release should target the current release. + +Everything else should be based on ``kvm-x86/next``, i.e. there is no need to +select a specific topic branch as the base. If there are conflicts and/or +dependencies across topic branches, it is the maintainer's job to sort them +out. + +The only exception to using ``kvm-x86/next`` as the base is if a patch/series +is a multi-arch series, i.e. has non-trivial modifications to common KVM code +and/or has more than superficial changes to other architectures' code. Multi- +arch patch/series should instead be based on a common, stable point in KVM's +history, e.g. the release candidate upon which ``kvm-x86 next`` is based. If +you're unsure whether a patch/series is truly multi-arch, err on the side of +caution and treat it as multi-arch, i.e. use a common base. + +Coding Style +~~~~~~~~~~~~ +When it comes to style, naming, patterns, etc., consistency is the number one +priority in KVM x86. If all else fails, match what already exists. + +With a few caveats listed below, follow the tip tree maintainers' preferred +:ref:`maintainer-tip-coding-style`, as patches/series often touch both KVM and +non-KVM x86 files, i.e. draw the attention of KVM *and* tip tree maintainers. + +Using reverse fir tree, a.k.a. reverse Christmas tree or reverse XMAS tree, for +variable declarations isn't strictly required, though it is still preferred. + +Except for a handful of special snowflakes, do not use kernel-doc comments for +functions. The vast majority of "public" KVM functions aren't truly public as +they are intended only for KVM-internal consumption (there are plans to +privatize KVM's headers and exports to enforce this). + +Comments +~~~~~~~~ +Write comments using imperative mood and avoid pronouns. Use comments to +provide a high level overview of the code, and/or to explain why the code does +what it does. Do not reiterate what the code literally does; let the code +speak for itself. If the code itself is inscrutable, comments will not help. + +SDM and APM References +~~~~~~~~~~~~~~~~~~~~~~ +Much of KVM's code base is directly tied to architectural behavior defined in +Intel's Software Development Manual (SDM) and AMD's Architecture Programmer’s +Manual (APM). Use of "Intel's SDM" and "AMD's APM", or even just "SDM" or +"APM", without additional context is a-ok. + +Do not reference specific sections, tables, figures, etc. by number, especially +not in comments. Instead, if necessary (see below), copy-paste the relevant +snippet and reference sections/tables/figures by name. The layouts of the SDM +and APM are constantly changing, and so the numbers/labels aren't stable. + +Generally speaking, do not explicitly reference or copy-paste from the SDM or +APM in comments. With few exceptions, KVM *must* honor architectural behavior, +therefore it's implied that KVM behavior is emulating SDM and/or APM behavior. +Note, referencing the SDM/APM in changelogs to justify the change and provide +context is perfectly ok and encouraged. + +Shortlog +~~~~~~~~ +The preferred prefix format is ``KVM: <topic>:``, where ``<topic>`` is one of:: + + - x86 + - x86/mmu + - x86/pmu + - x86/xen + - selftests + - SVM + - nSVM + - VMX + - nVMX + +**DO NOT use x86/kvm!** ``x86/kvm`` is used exclusively for Linux-as-a-KVM-guest +changes, i.e. for arch/x86/kernel/kvm.c. Do not use file names or complete file +paths as the subject/shortlog prefix. + +Note, these don't align with the topics branches (the topic branches care much +more about code conflicts). + +All names are case sensitive! ``KVM: x86:`` is good, ``kvm: vmx:`` is not. + +Capitalize the first word of the condensed patch description, but omit ending +punctionation. E.g.:: + + KVM: x86: Fix a null pointer dereference in function_xyz() + +not:: + + kvm: x86: fix a null pointer dereference in function_xyz. + +If a patch touches multiple topics, traverse up the conceptual tree to find the +first common parent (which is often simply ``x86``). When in doubt, +``git log path/to/file`` should provide a reasonable hint. + +New topics do occasionally pop up, but please start an on-list discussion if +you want to propose introducing a new topic, i.e. don't go rogue. + +See :ref:`the_canonical_patch_format` for more information, with one amendment: +do not treat the 70-75 character limit as an absolute, hard limit. Instead, +use 75 characters as a firm-but-not-hard limit, and use 80 characters as a hard +limit. I.e. let the shortlog run a few characters over the standard limit if +you have good reason to do so. + +Changelog +~~~~~~~~~ +Most importantly, write changelogs using imperative mood and avoid pronouns. + +See :ref:`describe_changes` for more information, with one amendment: lead with +a short blurb on the actual changes, and then follow up with the context and +background. Note! This order directly conflicts with the tip tree's preferred +approach! Please follow the tip tree's preferred style when sending patches +that primarily target arch/x86 code that is _NOT_ KVM code. + +Stating what a patch does before diving into details is preferred by KVM x86 +for several reasons. First and foremost, what code is actually being changed +is arguably the most important information, and so that info should be easy to +find. Changelogs that bury the "what's actually changing" in a one-liner after +3+ paragraphs of background make it very hard to find that information. + +For initial review, one could argue the "what's broken" is more important, but +for skimming logs and git archaeology, the gory details matter less and less. +E.g. when doing a series of "git blame", the details of each change along the +way are useless, the details only matter for the culprit. Providing the "what +changed" makes it easy to quickly determine whether or not a commit might be of +interest. + +Another benefit of stating "what's changing" first is that it's almost always +possible to state "what's changing" in a single sentence. Conversely, all but +the most simple bugs require multiple sentences or paragraphs to fully describe +the problem. If both the "what's changing" and "what's the bug" are super +short then the order doesn't matter. But if one is shorter (almost always the +"what's changing), then covering the shorter one first is advantageous because +it's less of an inconvenience for readers/reviewers that have a strict ordering +preference. E.g. having to skip one sentence to get to the context is less +painful than having to skip three paragraphs to get to "what's changing". + +Fixes +~~~~~ +If a change fixes a KVM/kernel bug, add a Fixes: tag even if the change doesn't +need to be backported to stable kernels, and even if the change fixes a bug in +an older release. + +Conversely, if a fix does need to be backported, explicitly tag the patch with +"Cc: stable@vger.kernel" (though the email itself doesn't need to Cc: stable); +KVM x86 opts out of backporting Fixes: by default. Some auto-selected patches +do get backported, but require explicit maintainer approval (search MANUALSEL). + +Function References +~~~~~~~~~~~~~~~~~~~ +When a function is mentioned in a comment, changelog, or shortlog (or anywhere +for that matter), use the format ``function_name()``. The parentheses provide +context and disambiguate the reference. + +Testing +------- +At a bare minimum, *all* patches in a series must build cleanly for KVM_INTEL=m +KVM_AMD=m, and KVM_WERROR=y. Building every possible combination of Kconfigs +isn't feasible, but the more the merrier. KVM_SMM, KVM_XEN, PROVE_LOCKING, and +X86_64 are particularly interesting knobs to turn. + +Running KVM selftests and KVM-unit-tests is also mandatory (and stating the +obvious, the tests need to pass). The only exception is for changes that have +negligible probability of affecting runtime behavior, e.g. patches that only +modify comments. When possible and relevant, testing on both Intel and AMD is +strongly preferred. Booting an actual VM is encouraged, but not mandatory. + +For changes that touch KVM's shadow paging code, running with TDP (EPT/NPT) +disabled is mandatory. For changes that affect common KVM MMU code, running +with TDP disabled is strongly encouraged. For all other changes, if the code +being modified depends on and/or interacts with a module param, testing with +the relevant settings is mandatory. + +Note, KVM selftests and KVM-unit-tests do have known failures. If you suspect +a failure is not due to your changes, verify that the *exact same* failure +occurs with and without your changes. + +Changes that touch reStructured Text documentation, i.e. .rst files, must build +htmldocs cleanly, i.e. with no new warnings or errors. + +If you can't fully test a change, e.g. due to lack of hardware, clearly state +what level of testing you were able to do, e.g. in the cover letter. + +New Features +~~~~~~~~~~~~ +With one exception, new features *must* come with test coverage. KVM specific +tests aren't strictly required, e.g. if coverage is provided by running a +sufficiently enabled guest VM, or by running a related kernel selftest in a VM, +but dedicated KVM tests are preferred in all cases. Negative testcases in +particular are mandatory for enabling of new hardware features as error and +exception flows are rarely exercised simply by running a VM. + +The only exception to this rule is if KVM is simply advertising support for a +feature via KVM_GET_SUPPORTED_CPUID, i.e. for instructions/features that KVM +can't prevent a guest from using and for which there is no true enabling. + +Note, "new features" does not just mean "new hardware features"! New features +that can't be well validated using existing KVM selftests and/or KVM-unit-tests +must come with tests. + +Posting new feature development without tests to get early feedback is more +than welcome, but such submissions should be tagged RFC, and the cover letter +should clearly state what type of feedback is requested/expected. Do not abuse +the RFC process; RFCs will typically not receive in-depth review. + +Bug Fixes +~~~~~~~~~ +Except for "obvious" found-by-inspection bugs, fixes must be accompanied by a +reproducer for the bug being fixed. In many cases the reproducer is implicit, +e.g. for build errors and test failures, but it should still be clear to +readers what is broken and how to verify the fix. Some leeway is given for +bugs that are found via non-public workloads/tests, but providing regression +tests for such bugs is strongly preferred. + +In general, regression tests are preferred for any bug that is not trivial to +hit. E.g. even if the bug was originally found by a fuzzer such as syzkaller, +a targeted regression test may be warranted if the bug requires hitting a +one-in-a-million type race condition. + +Note, KVM bugs are rarely urgent *and* non-trivial to reproduce. Ask yourself +if a bug is really truly the end of the world before posting a fix without a +reproducer. + +Posting +------- + +Links +~~~~~ +Do not explicitly reference bug reports, prior versions of a patch/series, etc. +via ``In-Reply-To:`` headers. Using ``In-Reply-To:`` becomes an unholy mess +for large series and/or when the version count gets high, and ``In-Reply-To:`` +is useless for anyone that doesn't have the original message, e.g. if someone +wasn't Cc'd on the bug report or if the list of recipients changes between +versions. + +To link to a bug report, previous version, or anything of interest, use lore +links. For referencing previous version(s), generally speaking do not include +a Link: in the changelog as there is no need to record the history in git, i.e. +put the link in the cover letter or in the section git ignores. Do provide a +formal Link: for bug reports and/or discussions that led to the patch. The +context of why a change was made is highly valuable for future readers. + +Git Base +~~~~~~~~ +If you are using git version 2.9.0 or later (Googlers, this is all of you!), +use ``git format-patch`` with the ``--base`` flag to automatically include the +base tree information in the generated patches. + +Note, ``--base=auto`` works as expected if and only if a branch's upstream is +set to the base topic branch, e.g. it will do the wrong thing if your upstream +is set to your personal repository for backup purposes. An alternative "auto" +solution is to derive the names of your development branches based on their +KVM x86 topic, and feed that into ``--base``. E.g. ``x86/pmu/my_branch_name``, +and then write a small wrapper to extract ``pmu`` from the current branch name +to yield ``--base=x/pmu``, where ``x`` is whatever name your repository uses to +track the KVM x86 remote. + +Co-Posting Tests +~~~~~~~~~~~~~~~~ +KVM selftests that are associated with KVM changes, e.g. regression tests for +bug fixes, should be posted along with the KVM changes as a single series. The +standard kernel rules for bisection apply, i.e. KVM changes that result in test +failures should be ordered after the selftests updates, and vice versa, new +tests that fail due to KVM bugs should be ordered after the KVM fixes. + +KVM-unit-tests should *always* be posted separately. Tools, e.g. b4 am, don't +know that KVM-unit-tests is a separate repository and get confused when patches +in a series apply on different trees. To tie KVM-unit-tests patches back to +KVM patches, first post the KVM changes and then provide a lore Link: to the +KVM patch/series in the KVM-unit-tests patch(es). + +Notifications +------------- +When a patch/series is officially accepted, a notification email will be sent +in reply to the original posting (cover letter for multi-patch series). The +notification will include the tree and topic branch, along with the SHA1s of +the commits of applied patches. + +If a subset of patches is applied, this will be clearly stated in the +notification. Unless stated otherwise, it's implied that any patches in the +series that were not accepted need more work and should be submitted in a new +version. + +If for some reason a patch is dropped after officially being accepted, a reply +will be sent to the notification email explaining why the patch was dropped, as +well as the next steps. + +SHA1 Stability +~~~~~~~~~~~~~~ +SHA1s are not 100% guaranteed to be stable until they land in Linus' tree! A +SHA1 is *usually* stable once a notification has been sent, but things happen. +In most cases, an update to the notification email be provided if an applied +patch's SHA1 changes. However, in some scenarios, e.g. if all KVM x86 branches +need to be rebased, individual notifications will not be given. + +Vulnerabilities +--------------- +Bugs that can be exploited by the guest to attack the host (kernel or +userspace), or that can be exploited by a nested VM to *its* host (L2 attacking +L1), are of particular interest to KVM. Please follow the protocol for +:ref:`securitybugs` if you suspect a bug can lead to an escape, data leak, etc. + diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index f73ac9e175a8..2397b31c0198 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -127,13 +127,35 @@ the value of ``Message-ID`` to the URL above. Updating patch status ~~~~~~~~~~~~~~~~~~~~~ -It may be tempting to help the maintainers and update the state of your -own patches when you post a new version or spot a bug. Please **do not** -do that. -Interfering with the patch status on patchwork will only cause confusion. Leave -it to the maintainer to figure out what is the most recent and current -version that should be applied. If there is any doubt, the maintainer -will reply and ask what should be done. +Contributors and reviewers do not have the permissions to update patch +state directly in patchwork. Patchwork doesn't expose much information +about the history of the state of patches, therefore having multiple +people update the state leads to confusion. + +Instead of delegating patchwork permissions netdev uses a simple mail +bot which looks for special commands/lines within the emails sent to +the mailing list. For example to mark a series as Changes Requested +one needs to send the following line anywhere in the email thread:: + + pw-bot: changes-requested + +As a result the bot will set the entire series to Changes Requested. +This may be useful when author discovers a bug in their own series +and wants to prevent it from getting applied. + +The use of the bot is entirely optional, if in doubt ignore its existence +completely. Maintainers will classify and update the state of the patches +themselves. No email should ever be sent to the list with the main purpose +of communicating with the bot, the bot commands should be seen as metadata. + +The use of the bot is restricted to authors of the patches (the ``From:`` +header on patch submission and command must match!), maintainers of +the modified code according to the MAINTAINERS file (again, ``From:`` +must match the MAINTAINERS entry) and a handful of senior reviewers. + +Bot records its activity here: + + https://patchwork.hopto.org/pw-bot.html Review timelines ~~~~~~~~~~~~~~~~ diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst new file mode 100644 index 000000000000..49f08289d62c --- /dev/null +++ b/Documentation/process/maintainer-soc.rst @@ -0,0 +1,177 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +SoC Subsystem +============= + +Overview +-------- + +The SoC subsystem is a place of aggregation for SoC-specific code. +The main components of the subsystem are: + +* devicetrees for 32- & 64-bit ARM and RISC-V +* 32-bit ARM board files (arch/arm/mach*) +* 32- & 64-bit ARM defconfigs +* SoC-specific drivers across architectures, in particular for 32- & 64-bit + ARM, RISC-V and Loongarch + +These "SoC-specific drivers" do not include clock, GPIO etc drivers that have +other top-level maintainers. The drivers/soc/ directory is generally meant +for kernel-internal drivers that are used by other drivers to provide SoC- +specific functionality like identifying an SoC revision or interfacing with +power domains. + +The SoC subsystem also serves as an intermediate location for changes to +drivers/bus, drivers/firmware, drivers/reset and drivers/memory. The addition +of new platforms, or the removal of existing ones, often go through the SoC +tree as a dedicated branch covering multiple subsystems. + +The main SoC tree is housed on git.kernel.org: + https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/ + +Clearly this is quite a wide range of topics, which no one person, or even +small group of people are capable of maintaining. Instead, the SoC subsystem +is comprised of many submaintainers, each taking care of individual platforms +and driver subdirectories. +In this regard, "platform" usually refers to a series of SoCs from a given +vendor, for example, Nvidia's series of Tegra SoCs. Many submaintainers operate +on a vendor level, responsible for multiple product lines. For several reasons, +including acquisitions/different business units in a company, things vary +significantly here. The various submaintainers are documented in the +MAINTAINERS file. + +Most of these submaintainers have their own trees where they stage patches, +sending pull requests to the main SoC tree. These trees are usually, but not +always, listed in MAINTAINERS. The main SoC maintainers can be reached via the +alias soc@kernel.org if there is no platform-specific maintainer, or if they +are unresponsive. + +What the SoC tree is not, however, is a location for architecture-specific code +changes. Each architecture has its own maintainers that are responsible for +architectural details, CPU errata and the like. + +Information for (new) Submaintainers +------------------------------------ + +As new platforms spring up, they often bring with them new submaintainers, +many of whom work for the silicon vendor, and may not be familiar with the +process. + +Devicetree ABI Stability +~~~~~~~~~~~~~~~~~~~~~~~~ + +Perhaps one of the most important things to highlight is that dt-bindings +document the ABI between the devicetree and the kernel. +Please read Documentation/devicetree/bindings/ABI.rst. + +If changes are being made to a devicetree that are incompatible with old +kernels, the devicetree patch should not be applied until the driver is, or an +appropriate time later. Most importantly, any incompatible changes should be +clearly pointed out in the patch description and pull request, along with the +expected impact on existing users, such as bootloaders or other operating +systems. + +Driver Branch Dependencies +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A common problem is synchronizing changes between device drivers and devicetree +files. Even if a change is compatible in both directions, this may require +coordinating how the changes get merged through different maintainer trees. + +Usually the branch that includes a driver change will also include the +corresponding change to the devicetree binding description, to ensure they are +in fact compatible. This means that the devicetree branch can end up causing +warnings in the "make dtbs_check" step. If a devicetree change depends on +missing additions to a header file in include/dt-bindings/, it will fail the +"make dtbs" step and not get merged. + +There are multiple ways to deal with this: + +* Avoid defining custom macros in include/dt-bindings/ for hardware constants + that can be derived from a datasheet -- binding macros in header files should + only be used as a last resort if there is no natural way to define a binding + +* Use literal values in the devicetree file in place of macros even when a + header is required, and change them to the named representation in a + following release + +* Defer the devicetree changes to a release after the binding and driver have + already been merged + +* Change the bindings in a shared immutable branch that is used as the base for + both the driver change and the devicetree changes + +* Add duplicate defines in the devicetree file guarded by an #ifndef section, + removing them in a later release + +Devicetree Naming Convention +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The general naming scheme for devicetree files is as follows. The aspects of a +platform that are set at the SoC level, like CPU cores, are contained in a file +named $soc.dtsi, for example, jh7100.dtsi. Integration details, that will vary +from board to board, are described in $soc-$board.dts. An example of this is +jh7100-beaglev-starlight.dts. Often many boards are variations on a theme, and +frequently there are intermediate files, such as jh7100-common.dtsi, which sit +between the $soc.dtsi and $soc-$board.dts files, containing the descriptions of +common hardware. + +Some platforms also have System on Modules, containing an SoC, which are then +integrated into several different boards. For these platforms, $soc-$som.dtsi +and $soc-$som-$board.dts are typical. + +Directories are usually named after the vendor of the SoC at the time of its +inclusion, leading to some historical directory names in the tree. + +Validating Devicetree Files +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +``make dtbs_check`` can be used to validate that devicetree files are compliant +with the dt-bindings that describe the ABI. Please read the section +"Running checks" of Documentation/devicetree/bindings/writing-schema.rst for +more information on the validation of devicetrees. + +For new platforms, or additions to existing ones, ``make dtbs_check`` should not +add any new warnings. For RISC-V, as it has the advantage of being a newer +architecture, ``make dtbs_check W=1`` is required to not add any new warnings. +If in any doubt about a devicetree change, reach out to the devicetree +maintainers. + +Branches and Pull Requests +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Just as the main SoC tree has several branches, it is expected that +submaintainers will do the same. Driver, defconfig and devicetree changes should +all be split into separate branches and appear in separate pull requests to the +SoC maintainers. Each branch should be usable by itself and avoid +regressions that originate from dependencies on other branches. + +Small sets of patches can also be sent as separate emails to soc@kernel.org, +grouped into the same categories. + +If changes do not fit into the normal patterns, there can be additional +top-level branches, e.g. for a treewide rework, or the addition of new SoC +platforms including dts files and drivers. + +Branches with a lot of changes can benefit from getting split up into separate +topics branches, even if they end up getting merged into the same branch of the +SoC tree. An example here would be one branch for devicetree warning fixes, one +for a rework and one for newly added boards. + +Another common way to split up changes is to send an early pull request with the +majority of the changes at some point between rc1 and rc4, following up with one +or more smaller pull requests towards the end of the cycle that can add late +changes or address problems identified while testing the first set. + +While there is no cut-off time for late pull requests, it helps to only send +small branches as time gets closer to the merge window. + +Pull requests for bugfixes for the current release can be sent at any time, but +again having multiple smaller branches is better than trying to combine too many +patches into one pull request. + +The subject line of a pull request should begin with "[GIT PULL]" and made using +a signed tag, rather than a branch. This tag should contain a short description +summarising the changes in the pull request. For more detail on sending pull +requests, please see Documentation/maintainer/pull-requests.rst. diff --git a/Documentation/process/maintainer-tip.rst b/Documentation/process/maintainer-tip.rst index 178c95fd17dc..08dd0f804410 100644 --- a/Documentation/process/maintainer-tip.rst +++ b/Documentation/process/maintainer-tip.rst @@ -421,6 +421,9 @@ allowing themselves a breath. Please respect that. The release candidate -rc1 is the starting point for new patches to be applied which are targeted for the next merge window. +So called _urgent_ branches will be merged into mainline during the +stabilization phase of each release. + Git ^^^ @@ -452,6 +455,8 @@ and can be added to an existing kernel config by running: Some of these options are x86-specific and can be left out when testing on other architectures. +.. _maintainer-tip-coding-style: + Coding style notes ------------------ diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 486875fd73c0..efac910e2659 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -331,6 +331,31 @@ explaining difference against previous submission (see See Documentation/process/email-clients.rst for recommendations on email clients and mailing list etiquette. +.. _interleaved_replies: + +Use trimmed interleaved replies in email discussions +---------------------------------------------------- +Top-posting is strongly discouraged in Linux kernel development +discussions. Interleaved (or "inline") replies make conversations much +easier to follow. For more details see: +https://en.wikipedia.org/wiki/Posting_style#Interleaved_style + +As is frequently quoted on the mailing list:: + + A: http://en.wikipedia.org/wiki/Top_post + Q: Were do I find info about this thing called top-posting? + A: Because it messes up the order in which people normally read text. + Q: Why is top-posting such a bad thing? + A: Top-posting. + Q: What is the most annoying thing in e-mail? + +Similarly, please trim all unneeded quotations that aren't relevant +to your reply. This makes responses easier to find, and saves time and +space. For more details see: http://daringfireball.net/2007/07/on_top :: + + A: No. + Q: Should I include quotations after my reply? + .. _resend_reminders: Don't get discouraged - or impatient diff --git a/Documentation/riscv/acpi.rst b/Documentation/riscv/acpi.rst new file mode 100644 index 000000000000..9870a282815b --- /dev/null +++ b/Documentation/riscv/acpi.rst @@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +ACPI on RISC-V +============== + +The ISA string parsing rules for ACPI are defined by `Version ASCIIDOC +Conversion, 12/2022 of the RISC-V specifications, as defined by tag +"riscv-isa-release-1239329-2023-05-23" (commit 1239329 +) <https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-1239329-2023-05-23>`_ diff --git a/Documentation/riscv/hwprobe.rst b/Documentation/riscv/hwprobe.rst index 9f0dd62dcb5d..19165ebd82ba 100644 --- a/Documentation/riscv/hwprobe.rst +++ b/Documentation/riscv/hwprobe.rst @@ -64,6 +64,19 @@ The following keys are defined: * :c:macro:`RISCV_HWPROBE_IMA_C`: The C extension is supported, as defined by version 2.2 of the RISC-V ISA manual. + * :c:macro:`RISCV_HWPROBE_IMA_V`: The V extension is supported, as defined by + version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZBA`: The Zba address generation extension is + supported, as defined in version 1.0 of the Bit-Manipulation ISA + extensions. + + * :c:macro:`RISCV_HWPROBE_EXT_ZBB`: The Zbb extension is supported, as defined + in version 1.0 of the Bit-Manipulation ISA extensions. + + * :c:macro:`RISCV_HWPROBE_EXT_ZBS`: The Zbs extension is supported, as defined + in version 1.0 of the Bit-Manipulation ISA extensions. + * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: A bitmask that contains performance information about the selected set of processors. diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst index 175a91db0200..81cf6e616476 100644 --- a/Documentation/riscv/index.rst +++ b/Documentation/riscv/index.rst @@ -5,11 +5,13 @@ RISC-V architecture .. toctree:: :maxdepth: 1 + acpi boot-image-header vm-layout hwprobe patch-acceptance uabi + vector features diff --git a/Documentation/riscv/patch-acceptance.rst b/Documentation/riscv/patch-acceptance.rst index 07d5a5623e2a..634aa222b410 100644 --- a/Documentation/riscv/patch-acceptance.rst +++ b/Documentation/riscv/patch-acceptance.rst @@ -16,6 +16,24 @@ tested code over experimental code. We wish to extend these same principles to the RISC-V-related code that will be accepted for inclusion in the kernel. +Patchwork +--------- + +RISC-V has a patchwork instance, where the status of patches can be checked: + + https://patchwork.kernel.org/project/linux-riscv/list/ + +If your patch does not appear in the default view, the RISC-V maintainers have +likely either requested changes, or expect it to be applied to another tree. + +Automation runs against this patchwork instance, building/testing patches as +they arrive. The automation applies patches against the current HEAD of the +RISC-V `for-next` and `fixes` branches, depending on whether the patch has been +detected as a fix. Failing those, it will use the RISC-V `master` branch. +The exact commit to which a series has been applied will be noted on patchwork. +Patches for which any of the checks fail are unlikely to be applied and in most +cases will need to be resubmitted. + Submit Checklist Addendum ------------------------- We'll only accept patches for new modules or extensions if the diff --git a/Documentation/riscv/vector.rst b/Documentation/riscv/vector.rst new file mode 100644 index 000000000000..165b7ed0ac4f --- /dev/null +++ b/Documentation/riscv/vector.rst @@ -0,0 +1,140 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +Vector Extension Support for RISC-V Linux +========================================= + +This document briefly outlines the interface provided to userspace by Linux in +order to support the use of the RISC-V Vector Extension. + +1. prctl() Interface +--------------------- + +Two new prctl() calls are added to allow programs to manage the enablement +status for the use of Vector in userspace. The intended usage guideline for +these interfaces is to give init systems a way to modify the availability of V +for processes running under its domain. Calling thess interfaces is not +recommended in libraries routines because libraries should not override policies +configured from the parant process. Also, users must noted that these interfaces +are not portable to non-Linux, nor non-RISC-V environments, so it is discourage +to use in a portable code. To get the availability of V in an ELF program, +please read :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the +auxiliary vector. + +* prctl(PR_RISCV_V_SET_CONTROL, unsigned long arg) + + Sets the Vector enablement status of the calling thread, where the control + argument consists of two 2-bit enablement statuses and a bit for inheritance + mode. Other threads of the calling process are unaffected. + + Enablement status is a tri-state value each occupying 2-bit of space in + the control argument: + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_DEFAULT`: Use the system-wide default + enablement status on execve(). The system-wide default setting can be + controlled via sysctl interface (see sysctl section below). + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_ON`: Allow Vector to be run for the + thread. + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_OFF`: Disallow Vector. Executing Vector + instructions under such condition will trap and casuse the termination of the thread. + + arg: The control argument is a 5-bit value consisting of 3 parts, and + accessed by 3 masks respectively. + + The 3 masks, PR_RISCV_V_VSTATE_CTRL_CUR_MASK, + PR_RISCV_V_VSTATE_CTRL_NEXT_MASK, and PR_RISCV_V_VSTATE_CTRL_INHERIT + represents bit[1:0], bit[3:2], and bit[4]. bit[1:0] accounts for the + enablement status of current thread, and the setting at bit[3:2] takes place + at next execve(). bit[4] defines the inheritance mode of the setting in + bit[3:2]. + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_CUR_MASK`: bit[1:0]: Account for the + Vector enablement status for the calling thread. The calling thread is + not able to turn off Vector once it has been enabled. The prctl() call + fails with EPERM if the value in this mask is PR_RISCV_V_VSTATE_CTRL_OFF + but the current enablement status is not off. Setting + PR_RISCV_V_VSTATE_CTRL_DEFAULT here takes no effect but to set back + the original enablement status. + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_NEXT_MASK`: bit[3:2]: Account for the + Vector enablement setting for the calling thread at the next execve() + system call. If PR_RISCV_V_VSTATE_CTRL_DEFAULT is used in this mask, + then the enablement status will be decided by the system-wide + enablement status when execve() happen. + + * :c:macro:`PR_RISCV_V_VSTATE_CTRL_INHERIT`: bit[4]: the inheritance + mode for the setting at PR_RISCV_V_VSTATE_CTRL_NEXT_MASK. If the bit + is set then the following execve() will not clear the setting in both + PR_RISCV_V_VSTATE_CTRL_NEXT_MASK and PR_RISCV_V_VSTATE_CTRL_INHERIT. + This setting persists across changes in the system-wide default value. + + Return value: + * 0 on success; + * EINVAL: Vector not supported, invalid enablement status for current or + next mask; + * EPERM: Turning off Vector in PR_RISCV_V_VSTATE_CTRL_CUR_MASK if Vector + was enabled for the calling thread. + + On success: + * A valid setting for PR_RISCV_V_VSTATE_CTRL_CUR_MASK takes place + immediately. The enablement status specified in + PR_RISCV_V_VSTATE_CTRL_NEXT_MASK happens at the next execve() call, or + all following execve() calls if PR_RISCV_V_VSTATE_CTRL_INHERIT bit is + set. + * Every successful call overwrites a previous setting for the calling + thread. + +* prctl(PR_RISCV_V_GET_CONTROL) + + Gets the same Vector enablement status for the calling thread. Setting for + next execve() call and the inheritance bit are all OR-ed together. + + Note that ELF programs are able to get the availability of V for itself by + reading :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the + auxiliary vector. + + Return value: + * a nonnegative value on success; + * EINVAL: Vector not supported. + +2. System runtime configuration (sysctl) +----------------------------------------- + +To mitigate the ABI impact of expansion of the signal stack, a +policy mechanism is provided to the administrators, distro maintainers, and +developers to control the default Vector enablement status for userspace +processes in form of sysctl knob: + +* /proc/sys/abi/riscv_v_default_allow + + Writing the text representation of 0 or 1 to this file sets the default + system enablement status for new starting userspace programs. Valid values + are: + + * 0: Do not allow Vector code to be executed as the default for new processes. + * 1: Allow Vector code to be executed as the default for new processes. + + Reading this file returns the current system default enablement status. + + At every execve() call, a new enablement status of the new process is set to + the system default, unless: + + * PR_RISCV_V_VSTATE_CTRL_INHERIT is set for the calling process, and the + setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not + PR_RISCV_V_VSTATE_CTRL_DEFAULT. Or, + + * The setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not + PR_RISCV_V_VSTATE_CTRL_DEFAULT. + + Modifying the system default enablement status does not affect the enablement + status of any existing process of thread that do not make an execve() call. + +3. Vector Register State Across System Calls +--------------------------------------------- + +As indicated by version 1.0 of the V extension [1], vector registers are +clobbered by system calls. + +1: https://github.com/riscv/riscv-v-spec/blob/master/calling-convention.adoc diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst index 13b7744b1e27..a8931512ed98 100644 --- a/Documentation/rust/quick-start.rst +++ b/Documentation/rust/quick-start.rst @@ -38,9 +38,9 @@ and run:: rustup override set $(scripts/min-tool-version.sh rustc) -Otherwise, fetch a standalone installer or install ``rustup`` from: +Otherwise, fetch a standalone installer from: - https://www.rust-lang.org + https://forge.rust-lang.org/infra/other-installation-methods.html#standalone Rust standard library source diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/s390/vfio-ap.rst index d46e98c7c1ec..bb3f4c4e2885 100644 --- a/Documentation/s390/vfio-ap.rst +++ b/Documentation/s390/vfio-ap.rst @@ -551,7 +551,6 @@ These are the steps: * IOMMU_SUPPORT * S390 * ZCRYPT - * S390_AP_IOMMU * VFIO * KVM diff --git a/Documentation/scheduler/sched-deadline.rst b/Documentation/scheduler/sched-deadline.rst index 9d9be52f221a..9fe4846079bb 100644 --- a/Documentation/scheduler/sched-deadline.rst +++ b/Documentation/scheduler/sched-deadline.rst @@ -203,12 +203,15 @@ Deadline Task Scheduling - Total bandwidth (this_bw): this is the sum of all tasks "belonging" to the runqueue, including the tasks in Inactive state. + - Maximum usable bandwidth (max_bw): This is the maximum bandwidth usable by + deadline tasks and is currently set to the RT capacity. + The algorithm reclaims the bandwidth of the tasks in Inactive state. It does so by decrementing the runtime of the executing task Ti at a pace equal to - dq = -max{ Ui / Umax, (1 - Uinact - Uextra) } dt + dq = -(max{ Ui, (Umax - Uinact - Uextra) } / Umax) dt where: diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst index aa176451d5b5..ea66b50a2b03 100644 --- a/Documentation/sound/cards/audigy-mixer.rst +++ b/Documentation/sound/cards/audigy-mixer.rst @@ -227,7 +227,7 @@ PCM stream related controls name='EMU10K1 PCM Volume',index 0-31 ------------------------------------ -Channel volume attenuation in range 0-0xffff. The maximum value (no +Channel volume attenuation in range 0-0x1fffd. The middle value (no attenuation) is default. The channel mapping for three values is as follows: @@ -240,30 +240,30 @@ name='EMU10K1 PCM Send Routing',index 0-31 This control specifies the destination - FX-bus accumulators. There are 24 values in this mapping: -* 0 - mono, A destination (FX-bus 0-63), default 0 -* 1 - mono, B destination (FX-bus 0-63), default 1 -* 2 - mono, C destination (FX-bus 0-63), default 2 -* 3 - mono, D destination (FX-bus 0-63), default 3 -* 4 - mono, E destination (FX-bus 0-63), default 0 -* 5 - mono, F destination (FX-bus 0-63), default 0 -* 6 - mono, G destination (FX-bus 0-63), default 0 -* 7 - mono, H destination (FX-bus 0-63), default 0 -* 8 - left, A destination (FX-bus 0-63), default 0 -* 9 - left, B destination (FX-bus 0-63), default 1 +* 0 - mono, A destination (FX-bus 0-63), default 0 +* 1 - mono, B destination (FX-bus 0-63), default 1 +* 2 - mono, C destination (FX-bus 0-63), default 2 +* 3 - mono, D destination (FX-bus 0-63), default 3 +* 4 - mono, E destination (FX-bus 0-63), default 4 +* 5 - mono, F destination (FX-bus 0-63), default 5 +* 6 - mono, G destination (FX-bus 0-63), default 6 +* 7 - mono, H destination (FX-bus 0-63), default 7 +* 8 - left, A destination (FX-bus 0-63), default 0 +* 9 - left, B destination (FX-bus 0-63), default 1 * 10 - left, C destination (FX-bus 0-63), default 2 * 11 - left, D destination (FX-bus 0-63), default 3 -* 12 - left, E destination (FX-bus 0-63), default 0 -* 13 - left, F destination (FX-bus 0-63), default 0 -* 14 - left, G destination (FX-bus 0-63), default 0 -* 15 - left, H destination (FX-bus 0-63), default 0 +* 12 - left, E destination (FX-bus 0-63), default 4 +* 13 - left, F destination (FX-bus 0-63), default 5 +* 14 - left, G destination (FX-bus 0-63), default 6 +* 15 - left, H destination (FX-bus 0-63), default 7 * 16 - right, A destination (FX-bus 0-63), default 0 * 17 - right, B destination (FX-bus 0-63), default 1 * 18 - right, C destination (FX-bus 0-63), default 2 * 19 - right, D destination (FX-bus 0-63), default 3 -* 20 - right, E destination (FX-bus 0-63), default 0 -* 21 - right, F destination (FX-bus 0-63), default 0 -* 22 - right, G destination (FX-bus 0-63), default 0 -* 23 - right, H destination (FX-bus 0-63), default 0 +* 20 - right, E destination (FX-bus 0-63), default 4 +* 21 - right, F destination (FX-bus 0-63), default 5 +* 22 - right, G destination (FX-bus 0-63), default 6 +* 23 - right, H destination (FX-bus 0-63), default 7 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator more than once (it means 0=0 && 1=0 is an invalid combination). diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index c016f8c3b88b..49c1f2f688f8 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -17,3 +17,4 @@ Card-Specific Information hdspm serial-u16550 img-spdif-in + pcmtest diff --git a/Documentation/sound/cards/pcmtest.rst b/Documentation/sound/cards/pcmtest.rst new file mode 100644 index 000000000000..e163522f3205 --- /dev/null +++ b/Documentation/sound/cards/pcmtest.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Virtual PCM Test Driver +=========================== + +The Virtual PCM Test Driver emulates a generic PCM device, and can be used for +testing/fuzzing of the userspace ALSA applications, as well as for testing/fuzzing of +the PCM middle layer. Additionally, it can be used for simulating hard to reproduce +problems with PCM devices. + +What can this driver do? +~~~~~~~~~~~~~~~~~~~~~~~~ + +At this moment the driver can do the following things: + * Simulate both capture and playback processes + * Generate random or pattern-based capturing data + * Inject delays into the playback and capturing processes + * Inject errors during the PCM callbacks + +It supports up to 8 substreams and 4 channels. Also it supports both interleaved and +non-interleaved access modes. + +Also, this driver can check the playback stream for containing the predefined pattern, +which is used in the corresponding selftest (alsa/pcmtest-test.sh) to check the PCM middle +layer data transferring functionality. Additionally, this driver redefines the default +RESET ioctl, and the selftest covers this PCM API functionality as well. + +Configuration +------------- + +The driver has several parameters besides the common ALSA module parameters: + + * fill_mode (bool) - Buffer fill mode (see below) + * inject_delay (int) + * inject_hwpars_err (bool) + * inject_prepare_err (bool) + * inject_trigger_err (bool) + + +Capture Data Generation +----------------------- + +The driver has two modes of data generation: the first (0 in the fill_mode parameter) +means random data generation, the second (1 in the fill_mode) - pattern-based +data generation. Let's look at the second mode. + +First of all, you may want to specify the pattern for data generation. You can do it +by writing the pattern to the debugfs file. There are pattern buffer debugfs entries +for each channel, as well as entries which contain the pattern buffer length. + + * /sys/kernel/debug/pcmtest/fill_pattern[0-3] + * /sys/kernel/debug/pcmtest/fill_pattern[0-3]_len + +To set the pattern for the channel 0 you can execute the following command: + +.. code-block:: bash + + echo -n mycoolpattern > /sys/kernel/debug/pcmtest/fill_pattern0 + +Then, after every capture action performed on the 'pcmtest' device the buffer for the +channel 0 will contain 'mycoolpatternmycoolpatternmycoolpatternmy...'. + +The pattern itself can be up to 4096 bytes long. + +Delay injection +--------------- + +The driver has 'inject_delay' parameter, which has very self-descriptive name and +can be used for time delay/speedup simulations. The parameter has integer type, and +it means the delay added between module's internal timer ticks. + +If the 'inject_delay' value is positive, the buffer will be filled slower, if it is +negative - faster. You can try it yourself by starting a recording in any +audiorecording application (like Audacity) and selecting the 'pcmtest' device as a +source. + +This parameter can be also used for generating a huge amount of sound data in a very +short period of time (with the negative 'inject_delay' value). + +Errors injection +---------------- + +This module can be used for injecting errors into the PCM communication process. This +action can help you to figure out how the userspace ALSA program behaves under unusual +circumstances. + +For example, you can make all 'hw_params' PCM callback calls return EBUSY error by +writing '1' to the 'inject_hwpars_err' module parameter: + +.. code-block:: bash + + echo 1 > /sys/module/snd_pcmtest/parameters/inject_hwpars_err + +Errors can be injected into the following PCM callbacks: + + * hw_params (EBUSY) + * prepare (EINVAL) + * trigger (EINVAL) + +Playback test +------------- + +This driver can be also used for the playback functionality testing - every time you +write the playback data to the 'pcmtest' PCM device and close it, the driver checks the +buffer for containing the looped pattern (which is specified in the fill_pattern +debugfs file for each channel). If the playback buffer content represents the looped +pattern, 'pc_test' debugfs entry is set into '1'. Otherwise, the driver sets it to '0'. + +ioctl redefinition test +----------------------- + +The driver redefines the 'reset' ioctl, which is default for all PCM devices. To test +this functionality, we can trigger the reset ioctl and check the 'ioctl_test' debugfs +entry: + +.. code-block:: bash + + cat /sys/kernel/debug/pcmtest/ioctl_test + +If the ioctl is triggered successfully, this file will contain '1', and '0' otherwise. diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst index 819886634400..4dd9bfe01bd8 100644 --- a/Documentation/sound/cards/sb-live-mixer.rst +++ b/Documentation/sound/cards/sb-live-mixer.rst @@ -258,7 +258,7 @@ PCM stream related controls ``name='EMU10K1 PCM Volume',index 0-31`` ---------------------------------------- -Channel volume attenuation in range 0-0xffff. The maximum value (no +Channel volume attenuation in range 0-0x1fffd. The middle value (no attenuation) is default. The channel mapping for three values is as follows: diff --git a/Documentation/sound/designs/compress-offload.rst b/Documentation/sound/designs/compress-offload.rst index 935f325dbc77..655624f77092 100644 --- a/Documentation/sound/designs/compress-offload.rst +++ b/Documentation/sound/designs/compress-offload.rst @@ -268,11 +268,12 @@ with setting of meta_data and signalling for next track :: | | | V | +----------+ - | | | - | |NEXT_TRACK| - | | | - | +----------+ - | | + | compr_set_params() | | + | +-----------|NEXT_TRACK| + | | | | + | | +--+-------+ + | | | | + | +--------------+ | | | | | compr_partial_drain() | | diff --git a/Documentation/sound/designs/index.rst b/Documentation/sound/designs/index.rst index 1eb08e7bae52..b79db9ad8732 100644 --- a/Documentation/sound/designs/index.rst +++ b/Documentation/sound/designs/index.rst @@ -15,3 +15,4 @@ Designs and Implementations oss-emulation seq-oss jack-injection + midi-2.0 diff --git a/Documentation/sound/designs/midi-2.0.rst b/Documentation/sound/designs/midi-2.0.rst new file mode 100644 index 000000000000..27d0d3dea1b0 --- /dev/null +++ b/Documentation/sound/designs/midi-2.0.rst @@ -0,0 +1,378 @@ +================= +MIDI 2.0 on Linux +================= + +General +======= + +MIDI 2.0 is an extended protocol for providing higher resolutions and +more fine controls over the legacy MIDI 1.0. The fundamental changes +introduced for supporting MIDI 2.0 are: + +- Support of Universal MIDI Packet (UMP) +- Support of MIDI 2.0 protocol messages +- Transparent conversions between UMP and legacy MIDI 1.0 byte stream +- MIDI-CI for property and profile configurations + +UMP is a new container format to hold all MIDI protocol 1.0 and MIDI +2.0 protocol messages. Unlike the former byte stream, it's 32bit +aligned, and each message can be put in a single packet. UMP can send +the events up to 16 "UMP Groups", where each UMP Group contain up to +16 MIDI channels. + +MIDI 2.0 protocol is an extended protocol to achieve the higher +resolution and more controls over the old MIDI 1.0 protocol. + +MIDI-CI is a high-level protocol that can talk with the MIDI device +for the flexible profiles and configurations. It's represented in the +form of special SysEx. + +For Linux implementations, the kernel supports the UMP transport and +the encoding/decoding of MIDI protocols on UMP, while MIDI-CI is +supported in user-space over the standard SysEx. + +As of this writing, only USB MIDI device supports the UMP and Linux +2.0 natively. The UMP support itself is pretty generic, hence it +could be used by other transport layers, although it could be +implemented differently (e.g. as a ALSA sequencer client), too. + +The access to UMP devices are provided in two ways: the access via +rawmidi device and the access via ALSA sequencer API. + +ALSA sequencer API was extended to allow the payload of UMP packets. +It's allowed to connect freely between MIDI 1.0 and MIDI 2.0 sequencer +clients, and the events are converted transparently. + + +Kernel Configuration +==================== + +The following new configs are added for supporting MIDI 2.0: +`CONFIG_SND_UMP`, `CONFIG_SND_UMP_LEGACY_RAWMIDI`, +`CONFIG_SND_SEQ_UMP`, `CONFIG_SND_SEQ_UMP_CLIENT`, and +`CONFIG_SND_USB_AUDIO_MIDI_V2`. The first visible one is +`CONFIG_SND_USB_AUDIO_MIDI_V2`, and when you choose it (to set `=y`), +the core support for UMP (`CONFIG_SND_UMP`) and the sequencer binding +(`CONFIG_SND_SEQ_UMP_CLIENT`) will be automatically selected. + +Additionally, `CONFIG_SND_UMP_LEGACY_RAWMIDI=y` will enable the +support for the legacy raw MIDI device for UMP Endpoints. + + +Rawmidi Device with USB MIDI 2.0 +================================ + +When a device supports MIDI 2.0, the USB-audio driver probes and uses +the MIDI 2.0 interface (that is found always at the altset 1) as +default instead of the MIDI 1.0 interface (at altset 0). You can +switch back to the binding with the old MIDI 1.0 interface by passing +`midi2_enable=0` option to snd-usb-audio driver module, too. + +The USB audio driver tries to query the UMP Endpoint and UMP Function +Block information that are provided since UMP v1.1, and builds up the +topology based on those information. When the device is older and +doesn't respond to the new UMP inquiries, the driver falls back and +builds the topology based on Group Terminal Block (GTB) information +from the USB descriptor. Some device might be screwed up by the +unexpected UMP command; in such a case, pass `midi2_probe=0` option to +snd-usb-audio driver for skipping the UMP v1.1 inquiries. + +When the MIDI 2.0 device is probed, the kernel creates a rawmidi +device for each UMP Endpoint of the device. Its device name is +`/dev/snd/umpC*D*` and different from the standard rawmidi device name +`/dev/snd/midiC*D*` for MIDI 1.0, in order to avoid confusing the +legacy applications accessing mistakenly to UMP devices. + +You can read and write UMP packet data directly from/to this UMP +rawmidi device. For example, reading via `hexdump` like below will +show the incoming UMP packets of the card 0 device 0 in the hex +format:: + + % hexdump -C /dev/snd/umpC0D0 + 00000000 01 07 b0 20 00 07 b0 20 64 3c 90 20 64 3c 80 20 |... ... d<. d<. | + +Unlike the MIDI 1.0 byte stream, UMP is a 32bit packet, and the size +for reading or writing the device is also aligned to 32bit (which is 4 +bytes). + +The 32-bit words in the UMP packet payload are always in CPU native +endianness. Transport drivers are responsible to convert UMP words +from / to system endianness to required transport endianness / byte +order. + +When `CONFIG_SND_UMP_LEGACY_RAWMIDI` is set, the driver creates +another standard raw MIDI device additionally as `/dev/snd/midiC*D*`. +This contains 16 substreams, and each substream corresponds to a +(0-based) UMP Group. Legacy applications can access to the specified +group via each substream in MIDI 1.0 byte stream format. With the +ALSA rawmidi API, you can open the arbitrary substream, while just +opening `/dev/snd/midiC*D*` will end up with opening the first +substream. + +Each UMP Endpoint can provide the additional information, constructed +from the information inquired via UMP 1.1 Stream messages or USB MIDI +2.0 descriptors. And a UMP Endpoint may contain one or more UMP +Blocks, where UMP Block is an abstraction introduced in the ALSA UMP +implementations to represent the associations among UMP Groups. UMP +Block corresponds to Function Block in UMP 1.1 specification. When +UMP 1.1 Function Block information isn't available, it's filled +partially from Group Terminal Block (GTB) as defined in USB MIDI 2.0 +specifications. + +The information of UMP Endpoints and UMP Blocks are found in the proc +file `/proc/asound/card*/midi*`. For example:: + + % cat /proc/asound/card1/midi0 + ProtoZOA MIDI + + Type: UMP + EP Name: ProtoZOA + EP Product ID: ABCD12345678 + UMP Version: 0x0000 + Protocol Caps: 0x00000100 + Protocol: 0x00000100 + Num Blocks: 3 + + Block 0 (ProtoZOA Main) + Direction: bidirection + Active: Yes + Groups: 1-1 + Is MIDI1: No + + Block 1 (ProtoZOA Ext IN) + Direction: output + Active: Yes + Groups: 2-2 + Is MIDI1: Yes (Low Speed) + .... + +Note that `Groups` field shown in the proc file above indicates the +1-based UMP Group numbers (from-to). + +Those additional UMP Endpoint and UMP Block information can be +obtained via the new ioctls `SNDRV_UMP_IOCTL_ENDPOINT_INFO` and +`SNDRV_UMP_IOCTL_BLOCK_INFO`, respectively. + +The rawmidi name and the UMP Endpoint name are usually identical, and +in the case of USB MIDI, it's taken from `iInterface` of the +corresponding USB MIDI interface descriptor. If it's not provided, +it's copied from `iProduct` of the USB device descriptor as a +fallback. + +The Endpoint Product ID is a string field and supposed to be unique. +It's copied from `iSerialNumber` of the device for USB MIDI. + +The protocol capabilities and the actual protocol bits are defined in +`asound.h`. + + +ALSA Sequencer with USB MIDI 2.0 +================================ + +In addition to the rawmidi interfaces, ALSA sequencer interface +supports the new UMP MIDI 2.0 device, too. Now, each ALSA sequencer +client may set its MIDI version (0, 1 or 2) to declare itself being +either the legacy, UMP MIDI 1.0 or UMP MIDI 2.0 device, respectively. +The first, legacy client is the one that sends/receives the old +sequencer event as was. Meanwhile, UMP MIDI 1.0 and 2.0 clients send +and receive in the extended event record for UMP. The MIDI version is +seen in the new `midi_version` field of `snd_seq_client_info`. + +A UMP packet can be sent/received in a sequencer event embedded by +specifying the new event flag bit `SNDRV_SEQ_EVENT_UMP`. When this +flag is set, the event has 16 byte (128 bit) data payload for holding +the UMP packet. Without the `SNDRV_SEQ_EVENT_UMP` bit flag, the event +is treated as a legacy event as it was (with max 12 byte data +payload). + +With `SNDRV_SEQ_EVENT_UMP` flag set, the type field of a UMP sequencer +event is ignored (but it should be set to 0 as default). + +The type of each client can be seen in `/proc/asound/seq/clients`. +For example:: + + % cat /proc/asound/seq/clients + Client info + cur clients : 3 + .... + Client 14 : "Midi Through" [Kernel Legacy] + Port 0 : "Midi Through Port-0" (RWe-) + Client 20 : "ProtoZOA" [Kernel UMP MIDI1] + UMP Endpoint: ProtoZOA + UMP Block 0: ProtoZOA Main [Active] + Groups: 1-1 + UMP Block 1: ProtoZOA Ext IN [Active] + Groups: 2-2 + UMP Block 2: ProtoZOA Ext OUT [Active] + Groups: 3-3 + Port 0 : "MIDI 2.0" (RWeX) [In/Out] + Port 1 : "ProtoZOA Main" (RWeX) [In/Out] + Port 2 : "ProtoZOA Ext IN" (-We-) [Out] + Port 3 : "ProtoZOA Ext OUT" (R-e-) [In] + +Here you can find two types of kernel clients, "Legacy" for client 14, +and "UMP MIDI1" for client 20, which is a USB MIDI 2.0 device. +A USB MIDI 2.0 client gives always the port 0 as "MIDI 2.0" and the +rest ports from 1 for each UMP Group (e.g. port 1 for Group 1). +In this example, the device has three active groups (Main, Ext IN and +Ext OUT), and those are exposed as sequencer ports from 1 to 3. +The "MIDI 2.0" port is for a UMP Endpoint, and its difference from +other UMP Group ports is that UMP Endpoint port sends the events from +the all ports on the device ("catch-all"), while each UMP Group port +sends only the events from the given UMP Group. +Also, UMP groupless messages (such as the UMP message type 0x0f) are +sent only to the UMP Endpoint port. + +Note that, although each UMP sequencer client usually creates 16 +ports, those ports that don't belong to any UMP Blocks (or belonging +to inactive UMP Blocks) are marked as inactive, and they don't appear +in the proc outputs. In the example above, the sequencer ports from 4 +to 16 are present but not shown there. + +The proc file above shows the UMP Block information, too. The same +entry (but with more detailed information) is found in the rawmidi +proc output. + +When clients are connected between different MIDI versions, the events +are translated automatically depending on the client's version, not +only between the legacy and the UMP MIDI 1.0/2.0 types, but also +between UMP MIDI 1.0 and 2.0 types, too. For example, running +`aseqdump` program on the ProtoZOA Main port in the legacy mode will +give you the output like:: + + % aseqdump -p 20:1 + Waiting for data. Press Ctrl+C to end. + Source Event Ch Data + 20:1 Note on 0, note 60, velocity 100 + 20:1 Note off 0, note 60, velocity 100 + 20:1 Control change 0, controller 11, value 4 + +When you run `aseqdump` in MIDI 2.0 mode, it'll receive the high +precision data like:: + + % aseqdump -u 2 -p 20:1 + Waiting for data. Press Ctrl+C to end. + Source Event Ch Data + 20:1 Note on 0, note 60, velocity 0xc924, attr type = 0, data = 0x0 + 20:1 Note off 0, note 60, velocity 0xc924, attr type = 0, data = 0x0 + 20:1 Control change 0, controller 11, value 0x2000000 + +while the data is automatically converted by ALSA sequencer core. + + +Rawmidi API Extensions +====================== + +* The additional UMP Endpoint information can be obtained via the new + ioctl `SNDRV_UMP_IOCTL_ENDPOINT_INFO`. It contains the associated + card and device numbers, the bit flags, the protocols, the number of + UMP Blocks, the name string of the endpoint, etc. + + The protocols are specified in two field, the protocol capabilities + and the current protocol. Both contain the bit flags specifying the + MIDI protocol version (`SNDRV_UMP_EP_INFO_PROTO_MIDI1` or + `SNDRV_UMP_EP_INFO_PROTO_MIDI2`) in the upper byte and the jitter + reduction timestamp (`SNDRV_UMP_EP_INFO_PROTO_JRTS_TX` and + `SNDRV_UMP_EP_INFO_PROTO_JRTS_RX`) in the lower byte. + + A UMP Endpoint may contain up to 32 UMP Blocks, and the number of + the currently assigned blocks are shown in the Endpoint information. + +* Each UMP Block information can be obtained via another new ioctl + `SNDRV_UMP_IOCTL_BLOCK_INFO`. The block ID number (0-based) has to + be passed for the block to query. The received data contains the + associated the direction of the block, the first associated group ID + (0-based) and the number of groups, the name string of the block, + etc. + + The direction is either `SNDRV_UMP_DIR_INPUT`, + `SNDRV_UMP_DIR_OUTPUT` or `SNDRV_UMP_DIR_BIDIRECTION`. + +* For the device supports UMP v1.1, the UMP MIDI protocol can be + switched via "Stream Configuration Request" message (UMP type 0x0f, + status 0x05). When UMP core receives such a message, it updates the + UMP EP info and the corresponding sequencer clients as well. + + +Control API Extensions +====================== + +* The new ioctl `SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE` is introduced for + querying the next UMP rawmidi device, while the existing ioctl + `SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE` queries only the legacy + rawmidi devices. + + For setting the subdevice (substream number) to be opened, use the + ioctl `SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE` like the normal + rawmidi. + +* Two new ioctls `SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO` and + `SNDRV_CTL_IOCTL_UMP_BLOCK_INFO` provide the UMP Endpoint and UMP + Block information of the specified UMP device via ALSA control API + without opening the actual (UMP) rawmidi device. + The `card` field is ignored upon inquiry, always tied with the card + of the control interface. + + +Sequencer API Extensions +======================== + +* `midi_version` field is added to `snd_seq_client_info` to indicate + the current MIDI version (either 0, 1 or 2) of each client. + When `midi_version` is 1 or 2, the alignment of read from a UMP + sequencer client is also changed from the former 28 bytes to 32 + bytes for the extended payload. The alignment size for the write + isn't changed, but each event size may differ depending on the new + bit flag below. + +* `SNDRV_SEQ_EVENT_UMP` flag bit is added for each sequencer event + flags. When this bit flag is set, the sequencer event is extended + to have a larger payload of 16 bytes instead of the legacy 12 + bytes, and the event contains the UMP packet in the payload. + +* The new sequencer port type bit (`SNDRV_SEQ_PORT_TYPE_MIDI_UMP`) + indicates the port being UMP-capable. + +* The sequencer ports have new capability bits to indicate the + inactive ports (`SNDRV_SEQ_PORT_CAP_INACTIVE`) and the UMP Endpoint + port (`SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT`). + +* The event conversion of ALSA sequencer clients can be suppressed the + new filter bit `SNDRV_SEQ_FILTER_NO_CONVERT` set to the client info. + For example, the kernel pass-through client (`snd-seq-dummy`) sets + this flag internally. + +* The port information gained the new field `direction` to indicate + the direction of the port (either `SNDRV_SEQ_PORT_DIR_INPUT`, + `SNDRV_SEQ_PORT_DIR_OUTPUT` or `SNDRV_SEQ_PORT_DIR_BIDIRECTION`). + +* Another additional field for the port information is `ump_group` + which specifies the associated UMP Group Number (1-based). + When it's non-zero, the UMP group field in the UMP packet updated + upon delivery to the specified group (corrected to be 0-based). + Each sequencer port is supposed to set this field if it's a port to + specific to a certain UMP group. + +* Each client may set the additional event filter for UMP Groups in + `group_filter` bitmap. The filter consists of bitmap from 1-based + Group numbers. For example, when the bit 1 is set, messages from + Group 1 (i.e. the very first group) are filtered and not delivered. + The bit 0 is used for filtering UMP groupless messages. + +* Two new ioctls are added for UMP-capable clients: + `SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO` and + `SNDRV_SEQ_IOCTL_SET_CLIENT_UMP_INFO`. They are used to get and set + either `snd_ump_endpoint_info` or `snd_ump_block_info` data + associated with the sequencer client. The USB MIDI driver provides + those information from the underlying UMP rawmidi, while a + user-space client may provide its own data via `*_SET` ioctl. + For an Endpoint data, pass 0 to the `type` field, while for a Block + data, pass the block number + 1 to the `type` field. + Setting the data for a kernel client shall result in an error. + +* With UMP 1.1, Function Block information may be changed + dynamically. When the update of Function Block is received from the + device, ALSA sequencer core changes the corresponding sequencer port + name and attributes accordingly, and notifies the changes via the + announcement to the ALSA sequencer system port, similarly like the + normal port change notification. diff --git a/Documentation/staging/crc32.rst b/Documentation/staging/crc32.rst index 8a6860f33b4e..7542220967cb 100644 --- a/Documentation/staging/crc32.rst +++ b/Documentation/staging/crc32.rst @@ -1,5 +1,5 @@ ================================= -brief tutorial on CRC computation +Brief tutorial on CRC computation ================================= A CRC is a long-division remainder. You add the CRC to the message, diff --git a/Documentation/subsystem-apis.rst b/Documentation/subsystem-apis.rst index b51f38527e14..b67a1b65855b 100644 --- a/Documentation/subsystem-apis.rst +++ b/Documentation/subsystem-apis.rst @@ -10,6 +10,30 @@ is taken directly from the kernel source, with supplemental material added as needed (or at least as we managed to add it — probably *not* all that is needed). +Human interfaces +---------------- + +.. toctree:: + :maxdepth: 1 + + input/index + hid/index + sound/index + gpu/index + fb/index + +Storage interfaces +------------------ + +.. toctree:: + :maxdepth: 1 + + filesystems/index + block/index + cdrom/index + scsi/index + target/index + **Fixme**: much more organizational work is needed here. .. toctree:: @@ -19,12 +43,8 @@ needed). core-api/index locking/index accounting/index - block/index - cdrom/index cpu-freq/index - fb/index fpga/index - hid/index i2c/index iio/index isdn/index @@ -34,26 +54,21 @@ needed). networking/index pcmcia/index power/index - target/index timers/index spi/index w1/index watchdog/index virt/index - input/index hwmon/index - gpu/index accel/index security/index - sound/index crypto/index - filesystems/index mm/index bpf/index usb/index PCI/index - scsi/index misc-devices/index scheduler/index mhi/index peci/index + wmi/index diff --git a/Documentation/timers/index.rst b/Documentation/timers/index.rst index df510ad0c989..983f91f8f023 100644 --- a/Documentation/timers/index.rst +++ b/Documentation/timers/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ====== -timers +Timers ====== .. toctree:: diff --git a/Documentation/tools/rtla/common_options.rst b/Documentation/tools/rtla/common_options.rst index af76df6205d4..aeb91ff3bd68 100644 --- a/Documentation/tools/rtla/common_options.rst +++ b/Documentation/tools/rtla/common_options.rst @@ -2,6 +2,10 @@ Set the osnoise tracer to run the sample threads in the cpu-list. +**-H**, **--house-keeping** *cpu-list* + + Run rtla control threads only on the given cpu-list. + **-d**, **--duration** *time[s|m|h|d]* Set the duration of the session. @@ -42,6 +46,10 @@ - *f:prio* - use SCHED_FIFO with *prio*; - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds. +**-C**, **--cgroup**\[*=cgroup*] + + Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option. + **-h**, **--help** Print help menu. diff --git a/Documentation/tools/rtla/common_timerlat_aa.rst b/Documentation/tools/rtla/common_timerlat_aa.rst index 795b9fbcbc6d..077029e6b289 100644 --- a/Documentation/tools/rtla/common_timerlat_aa.rst +++ b/Documentation/tools/rtla/common_timerlat_aa.rst @@ -5,10 +5,3 @@ **--no-aa** disable auto-analysis, reducing rtla timerlat cpu usage - -**--aa-only** *us* - - Set stop tracing conditions and run without collecting and displaying statistics. - Print the auto-analysis if the system hits the stop tracing condition. This option - is useful to reduce rtla timerlat CPU, enabling the debug without the overhead of - collecting the statistics. diff --git a/Documentation/tools/rtla/common_timerlat_options.rst b/Documentation/tools/rtla/common_timerlat_options.rst index bacdea6de7a3..88506b397c2d 100644 --- a/Documentation/tools/rtla/common_timerlat_options.rst +++ b/Documentation/tools/rtla/common_timerlat_options.rst @@ -26,3 +26,10 @@ Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies. *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have similar results. + +**-u**, **--user-threads** + + Set timerlat to run without a workload, and then dispatches user-space workloads + to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again + adding so the measurement for the kernel-to-user and user-to-kernel to the tracer + output. diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index 6bf7f0ca4556..057db78d4095 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -29,15 +29,18 @@ OPTIONS .. include:: common_options.rst +.. include:: common_timerlat_aa.rst + EXAMPLE ======= In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat hist** will change the priority of the *timerlat* threads to run under *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The -*1ms* period is also passed to the *timerlat* tracer:: +*1ms* period is also passed to the *timerlat* tracer. Auto-analysis is disabled +to reduce overhead :: - [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms + [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:10:00 diff --git a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst index 73799c1150ad..1b7cf4e3eafe 100644 --- a/Documentation/tools/rtla/rtla-timerlat-top.rst +++ b/Documentation/tools/rtla/rtla-timerlat-top.rst @@ -32,6 +32,13 @@ OPTIONS .. include:: common_timerlat_aa.rst +**--aa-only** *us* + + Set stop tracing conditions and run without collecting and displaying statistics. + Print the auto-analysis if the system hits the stop tracing condition. This option + is useful to reduce rtla timerlat CPU, enabling the debug without the overhead of + collecting the statistics. + EXAMPLE ======= diff --git a/Documentation/trace/coresight/coresight-dummy.rst b/Documentation/trace/coresight/coresight-dummy.rst new file mode 100644 index 000000000000..eff7c553ee6c --- /dev/null +++ b/Documentation/trace/coresight/coresight-dummy.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Coresight Dummy Trace Module +============================= + + :Author: Hao Zhang <quic_hazha@quicinc.com> + :Date: June 2023 + +Introduction +------------ + +The Coresight dummy trace module is for the specific devices that kernel don't +have permission to access or configure, e.g., CoreSight TPDMs on Qualcomm +platforms. For these devices, a dummy driver is needed to register them as +Coresight devices. The module may also be used to define components that may +not have any programming interfaces, so that paths can be created in the driver. +It provides Coresight API for operations on dummy devices, such as enabling and +disabling them. It also provides the Coresight dummy sink/source paths for +debugging. + +Config details +-------------- + +There are two types of nodes, dummy sink and dummy source. These nodes +are available at ``/sys/bus/coresight/devices``. + +Example output:: + + $ ls -l /sys/bus/coresight/devices | grep dummy + dummy_sink0 -> ../../../devices/platform/soc@0/soc@0:sink/dummy_sink0 + dummy_source0 -> ../../../devices/platform/soc@0/soc@0:source/dummy_source0 diff --git a/Documentation/trace/fprobetrace.rst b/Documentation/trace/fprobetrace.rst new file mode 100644 index 000000000000..7297f9478459 --- /dev/null +++ b/Documentation/trace/fprobetrace.rst @@ -0,0 +1,188 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +Fprobe-based Event Tracing +========================== + +.. Author: Masami Hiramatsu <mhiramat@kernel.org> + +Overview +-------- + +Fprobe event is similar to the kprobe event, but limited to probe on +the function entry and exit only. It is good enough for many use cases +which only traces some specific functions. + +This document also covers tracepoint probe events (tprobe) since this +is also works only on the tracepoint entry. User can trace a part of +tracepoint argument, or the tracepoint without trace-event, which is +not exposed on tracefs. + +As same as other dynamic events, fprobe events and tracepoint probe +events are defined via `dynamic_events` interface file on tracefs. + +Synopsis of fprobe-events +------------------------- +:: + + f[:[GRP1/][EVENT1]] SYM [FETCHARGS] : Probe on function entry + f[MAXACTIVE][:[GRP1/][EVENT1]] SYM%return [FETCHARGS] : Probe on function exit + t[:[GRP2/][EVENT2]] TRACEPOINT [FETCHARGS] : Probe on tracepoint + + GRP1 : Group name for fprobe. If omitted, use "fprobes" for it. + GRP2 : Group name for tprobe. If omitted, use "tracepoints" for it. + EVENT1 : Event name for fprobe. If omitted, the event name is + "SYM__entry" or "SYM__exit". + EVENT2 : Event name for tprobe. If omitted, the event name is + the same as "TRACEPOINT", but if the "TRACEPOINT" starts + with a digit character, "_TRACEPOINT" is used. + MAXACTIVE : Maximum number of instances of the specified function that + can be probed simultaneously, or 0 for the default value + as defined in Documentation/trace/fprobe.rst + + FETCHARGS : Arguments. Each probe can have up to 128 args. + ARG : Fetch "ARG" function argument using BTF (only for function + entry or tracepoint.) (\*1) + @ADDR : Fetch memory at ADDR (ADDR should be in kernel) + @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) + $stackN : Fetch Nth entry of stack (N >= 0) + $stack : Fetch stack address. + $argN : Fetch the Nth function argument. (N >= 1) (\*2) + $retval : Fetch return value.(\*3) + $comm : Fetch current task comm. + +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*4)(\*5) + \IMM : Store an immediate value to the argument. + NAME=FETCHARG : Set NAME as the argument name of FETCHARG. + FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types + (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types + (x8/x16/x32/x64), "char", "string", "ustring", "symbol", "symstr" + and bitfield are supported. + + (\*1) This is available only when BTF is enabled. + (\*2) only for the probe on function entry (offs == 0). + (\*3) only for return probe. + (\*4) this is useful for fetching a field of data structures. + (\*5) "u" means user-space dereference. + +For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`. + +BTF arguments +------------- +BTF (BPF Type Format) argument allows user to trace function and tracepoint +parameters by its name instead of ``$argN``. This feature is available if the +kernel is configured with CONFIG_BPF_SYSCALL and CONFIG_DEBUG_INFO_BTF. +If user only specify the BTF argument, the event's argument name is also +automatically set by the given name. :: + + # echo 'f:myprobe vfs_read count pos' >> dynamic_events + # cat dynamic_events + f:fprobes/myprobe vfs_read count=count pos=pos + +It also chooses the fetch type from BTF information. For example, in the above +example, the ``count`` is unsigned long, and the ``pos`` is a pointer. Thus, both +are converted to 64bit unsigned long, but only ``pos`` has "%Lx" print-format as +below :: + + # cat events/fprobes/myprobe/format + name: myprobe + ID: 1313 + format: + field:unsigned short common_type; offset:0; size:2; signed:0; + field:unsigned char common_flags; offset:2; size:1; signed:0; + field:unsigned char common_preempt_count; offset:3; size:1; signed:0; + field:int common_pid; offset:4; size:4; signed:1; + + field:unsigned long __probe_ip; offset:8; size:8; signed:0; + field:u64 count; offset:16; size:8; signed:0; + field:u64 pos; offset:24; size:8; signed:0; + + print fmt: "(%lx) count=%Lu pos=0x%Lx", REC->__probe_ip, REC->count, REC->pos + +If user unsures the name of arguments, ``$arg*`` will be helpful. The ``$arg*`` +is expanded to all function arguments of the function or the tracepoint. :: + + # echo 'f:myprobe vfs_read $arg*' >> dynamic_events + # cat dynamic_events + f:fprobes/myprobe vfs_read file=file buf=buf count=count pos=pos + +BTF also affects the ``$retval``. If user doesn't set any type, the retval type is +automatically picked from the BTF. If the function returns ``void``, ``$retval`` +is rejected. + +Usage examples +-------------- +Here is an example to add fprobe events on ``vfs_read()`` function entry +and exit, with BTF arguments. +:: + + # echo 'f vfs_read $arg*' >> dynamic_events + # echo 'f vfs_read%return $retval' >> dynamic_events + # cat dynamic_events + f:fprobes/vfs_read__entry vfs_read file=file buf=buf count=count pos=pos + f:fprobes/vfs_read__exit vfs_read%return arg1=$retval + # echo 1 > events/fprobes/enable + # head -n 20 trace | tail + # TASK-PID CPU# ||||| TIMESTAMP FUNCTION + # | | | ||||| | | + sh-70 [000] ...1. 335.883195: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 + sh-70 [000] ..... 335.883208: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 + sh-70 [000] ...1. 335.883220: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 + sh-70 [000] ..... 335.883224: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 + sh-70 [000] ...1. 335.883232: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c687a count=1 pos=0xffffc900005aff08 + sh-70 [000] ..... 335.883237: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 + sh-70 [000] ...1. 336.050329: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 + sh-70 [000] ..... 336.050343: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 + +You can see all function arguments and return values are recorded as signed int. + +Also, here is an example of tracepoint events on ``sched_switch`` tracepoint. +To compare the result, this also enables the ``sched_switch`` traceevent too. +:: + + # echo 't sched_switch $arg*' >> dynamic_events + # echo 1 > events/sched/sched_switch/enable + # echo 1 > events/tracepoints/sched_switch/enable + # echo > trace + # head -n 20 trace | tail + # TASK-PID CPU# ||||| TIMESTAMP FUNCTION + # | | | ||||| | | + sh-70 [000] d..2. 3912.083993: sched_switch: prev_comm=sh prev_pid=70 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120 + sh-70 [000] d..3. 3912.083995: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff88800664e100 next=0xffffffff828229c0 prev_state=1 + <idle>-0 [000] d..2. 3912.084183: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120 + <idle>-0 [000] d..3. 3912.084184: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0 + rcu_preempt-16 [000] d..2. 3912.084196: sched_switch: prev_comm=rcu_preempt prev_pid=16 prev_prio=120 prev_state=I ==> next_comm=swapper/0 next_pid=0 next_prio=120 + rcu_preempt-16 [000] d..3. 3912.084196: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff888004208000 next=0xffffffff828229c0 prev_state=1026 + <idle>-0 [000] d..2. 3912.085191: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120 + <idle>-0 [000] d..3. 3912.085191: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0 + +As you can see, the ``sched_switch`` trace-event shows *cooked* parameters, on +the other hand, the ``sched_switch`` tracepoint probe event shows *raw* +parameters. This means you can access any field values in the task +structure pointed by the ``prev`` and ``next`` arguments. + +For example, usually ``task_struct::start_time`` is not traced, but with this +traceprobe event, you can trace it as below. +:: + + # echo 't sched_switch comm=+1896(next):string start_time=+1728(next):u64' > dynamic_events + # head -n 20 trace | tail + # TASK-PID CPU# ||||| TIMESTAMP FUNCTION + # | | | ||||| | | + sh-70 [000] d..3. 5606.686577: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000 + rcu_preempt-16 [000] d..3. 5606.686602: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="sh" usage=1 start_time=1596095526 + sh-70 [000] d..3. 5606.686637: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 + <idle>-0 [000] d..3. 5606.687190: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000 + rcu_preempt-16 [000] d..3. 5606.687202: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 + <idle>-0 [000] d..3. 5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 + kworker/0:1-14 [000] d..3. 5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 + <idle>-0 [000] d..3. 5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 + +Currently, to find the offset of a specific field in the data structure, +you need to build kernel with debuginfo and run `perf probe` command with +`-D` option. e.g. +:: + + # perf probe -D "__probestub_sched_switch next->comm:string next->start_time" + p:probe/__probestub_sched_switch __probestub_sched_switch+0 comm=+1896(%cx):string start_time=+1728(%cx):u64 + +And replace the ``%cx`` with the ``next``. diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index 027437b745a0..f606c5bd1c0d 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -324,6 +324,12 @@ of ftrace. Here is a list of some of the key files: "set_graph_function", or "set_graph_notrace". (See the section "dynamic ftrace" below for more details.) + available_filter_functions_addrs: + + Similar to available_filter_functions, but with address displayed + for each function. The displayed address is the patch-site address + and can differ from /proc/kallsyms address. + dyn_ftrace_total_info: This file is for debugging purposes. The number of functions that @@ -1359,6 +1365,19 @@ Options for function_graph tracer: only a closing curly bracket "}" is displayed for the return of a function. + funcgraph-retval + When set, the return value of each traced function + will be printed after an equal sign "=". By default + this is off. + + funcgraph-retval-hex + When set, the return value will always be printed + in hexadecimal format. If the option is not set and + the return value is an error code, it will be printed + in signed decimal format; otherwise it will also be + printed in hexadecimal format. By default, this option + is off. + sleep-time When running function graph tracer, to include the time a task schedules out in its function. @@ -2704,6 +2723,119 @@ It is default disabled. 0) 1.757 us | } /* kmem_cache_free() */ 0) 2.861 us | } /* putname() */ +The return value of each traced function can be displayed after +an equal sign "=". When encountering system call failures, it +can be verfy helpful to quickly locate the function that first +returns an error code. + + - hide: echo nofuncgraph-retval > trace_options + - show: echo funcgraph-retval > trace_options + + Example with funcgraph-retval:: + + 1) | cgroup_migrate() { + 1) 0.651 us | cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */ + 1) | cgroup_migrate_execute() { + 1) | cpu_cgroup_can_attach() { + 1) | cgroup_taskset_first() { + 1) 0.732 us | cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */ + 1) 1.232 us | } /* cgroup_taskset_first = 0xffff93fc8fb20000 */ + 1) 0.380 us | sched_rt_can_attach(); /* = 0x0 */ + 1) 2.335 us | } /* cpu_cgroup_can_attach = -22 */ + 1) 4.369 us | } /* cgroup_migrate_execute = -22 */ + 1) 7.143 us | } /* cgroup_migrate = -22 */ + +The above example shows that the function cpu_cgroup_can_attach +returned the error code -22 firstly, then we can read the code +of this function to get the root cause. + +When the option funcgraph-retval-hex is not set, the return value can +be displayed in a smart way. Specifically, if it is an error code, +it will be printed in signed decimal format, otherwise it will +printed in hexadecimal format. + + - smart: echo nofuncgraph-retval-hex > trace_options + - hexadecimal: echo funcgraph-retval-hex > trace_options + + Example with funcgraph-retval-hex:: + + 1) | cgroup_migrate() { + 1) 0.651 us | cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */ + 1) | cgroup_migrate_execute() { + 1) | cpu_cgroup_can_attach() { + 1) | cgroup_taskset_first() { + 1) 0.732 us | cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */ + 1) 1.232 us | } /* cgroup_taskset_first = 0xffff93fc8fb20000 */ + 1) 0.380 us | sched_rt_can_attach(); /* = 0x0 */ + 1) 2.335 us | } /* cpu_cgroup_can_attach = 0xffffffea */ + 1) 4.369 us | } /* cgroup_migrate_execute = 0xffffffea */ + 1) 7.143 us | } /* cgroup_migrate = 0xffffffea */ + +At present, there are some limitations when using the funcgraph-retval +option, and these limitations will be eliminated in the future: + +- Even if the function return type is void, a return value will still + be printed, and you can just ignore it. + +- Even if return values are stored in multiple registers, only the + value contained in the first register will be recorded and printed. + To illustrate, in the x86 architecture, eax and edx are used to store + a 64-bit return value, with the lower 32 bits saved in eax and the + upper 32 bits saved in edx. However, only the value stored in eax + will be recorded and printed. + +- In certain procedure call standards, such as arm64's AAPCS64, when a + type is smaller than a GPR, it is the responsibility of the consumer + to perform the narrowing, and the upper bits may contain UNKNOWN values. + Therefore, it is advisable to check the code for such cases. For instance, + when using a u8 in a 64-bit GPR, bits [63:8] may contain arbitrary values, + especially when larger types are truncated, whether explicitly or implicitly. + Here are some specific cases to illustrate this point: + + **Case One**: + + The function narrow_to_u8 is defined as follows:: + + u8 narrow_to_u8(u64 val) + { + // implicitly truncated + return val; + } + + It may be compiled to:: + + narrow_to_u8: + < ... ftrace instrumentation ... > + RET + + If you pass 0x123456789abcdef to this function and want to narrow it, + it may be recorded as 0x123456789abcdef instead of 0xef. + + **Case Two**: + + The function error_if_not_4g_aligned is defined as follows:: + + int error_if_not_4g_aligned(u64 val) + { + if (val & GENMASK(31, 0)) + return -EINVAL; + + return 0; + } + + It could be compiled to:: + + error_if_not_4g_aligned: + CBNZ w0, .Lnot_aligned + RET // bits [31:0] are zero, bits + // [63:32] are UNKNOWN + .Lnot_aligned: + MOV x0, #-EINVAL + RET + + When passing 0x2_0000_0000 to it, the return value may be recorded as + 0x2_0000_0000 instead of 0. + You can put some comments on specific functions by using trace_printk() For example, if you want to put a comment inside the __might_sleep() function, you just have to include diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst index 4f87d8e21065..989255eb5622 100644 --- a/Documentation/trace/hisi-ptt.rst +++ b/Documentation/trace/hisi-ptt.rst @@ -148,14 +148,20 @@ For example, if the desired filter is Endpoint function 0000:01:00.1 the filter value will be 0x00101. If the desired filter is Root Port 0000:00:10.0 then then filter value is calculated as 0x80001. +The driver also presents every supported Root Port and Requester filter through +sysfs. Each filter will be an individual file with name of its related PCIe +device name (domain:bus:device.function). The files of Root Port filters are +under $(PTT PMU dir)/root_port_filters and files of Requester filters +are under $(PTT PMU dir)/requester_filters. + Note that multiple Root Ports can be specified at one time, but only one Endpoint function can be specified in one trace. Specifying both Root Port and function at the same time is not supported. Driver maintains a list of available filters and will check the invalid inputs. -Currently the available filters are detected in driver's probe. If the supported -devices are removed/added after probe, you may need to reload the driver to update -the filters. +The available filters will be dynamically updated, which means you will always +get correct filter information when hotplug events happen, or when you manually +remove/rescan the devices. 2. Type ------- diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index 479c9eac6335..3c9b263de9c2 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -35,7 +35,7 @@ Documentation written by Tom Zanussi in place of an explicit value field - this is simply a count of event hits. If 'values' isn't specified, an implicit 'hitcount' value will be automatically created and used as the only value. - Keys can be any field, or the special string 'stacktrace', which + Keys can be any field, or the special string 'common_stacktrace', which will use the event's kernel stacktrace as the key. The keywords 'keys' or 'key' can be used to specify keys, and the keywords 'values', 'vals', or 'val' can be used to specify values. Compound @@ -54,7 +54,7 @@ Documentation written by Tom Zanussi 'compatible' if the fields named in the trigger share the same number and type of fields and those fields also have the same names. Note that any two events always share the compatible 'hitcount' and - 'stacktrace' fields and can therefore be combined using those + 'common_stacktrace' fields and can therefore be combined using those fields, however pointless that may be. 'hist' triggers add a 'hist' file to each event's subdirectory. @@ -547,9 +547,9 @@ Extended error information the hist trigger display symbolic call_sites, we can have the hist trigger additionally display the complete set of kernel stack traces that led to each call_site. To do that, we simply use the special - value 'stacktrace' for the key parameter:: + value 'common_stacktrace' for the key parameter:: - # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ + # echo 'hist:keys=common_stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ /sys/kernel/tracing/events/kmem/kmalloc/trigger The above trigger will use the kernel stack trace in effect when an @@ -561,9 +561,9 @@ Extended error information every callpath to a kmalloc for a kernel compile):: # cat /sys/kernel/tracing/events/kmem/kmalloc/hist - # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] + # trigger info: hist:keys=common_stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] - { stacktrace: + { common_stacktrace: __kmalloc_track_caller+0x10b/0x1a0 kmemdup+0x20/0x50 hidraw_report_event+0x8a/0x120 [hid] @@ -581,7 +581,7 @@ Extended error information cpu_startup_entry+0x315/0x3e0 rest_init+0x7c/0x80 } hitcount: 3 bytes_req: 21 bytes_alloc: 24 - { stacktrace: + { common_stacktrace: __kmalloc_track_caller+0x10b/0x1a0 kmemdup+0x20/0x50 hidraw_report_event+0x8a/0x120 [hid] @@ -596,7 +596,7 @@ Extended error information do_IRQ+0x5a/0xf0 ret_from_intr+0x0/0x30 } hitcount: 3 bytes_req: 21 bytes_alloc: 24 - { stacktrace: + { common_stacktrace: kmem_cache_alloc_trace+0xeb/0x150 aa_alloc_task_context+0x27/0x40 apparmor_cred_prepare+0x1f/0x50 @@ -608,7 +608,7 @@ Extended error information . . . - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 i915_gem_execbuffer2+0x6c/0x2c0 [i915] drm_ioctl+0x349/0x670 [drm] @@ -616,7 +616,7 @@ Extended error information SyS_ioctl+0x81/0xa0 system_call_fastpath+0x12/0x6a } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808 - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 load_elf_phdrs+0x76/0xa0 load_elf_binary+0x102/0x1650 @@ -625,7 +625,7 @@ Extended error information SyS_execve+0x3a/0x50 return_from_execve+0x0/0x23 } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048 - { stacktrace: + { common_stacktrace: kmem_cache_alloc_trace+0xeb/0x150 apparmor_file_alloc_security+0x27/0x40 security_file_alloc+0x16/0x20 @@ -636,7 +636,7 @@ Extended error information SyS_open+0x1e/0x20 system_call_fastpath+0x12/0x6a } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376 - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 seq_buf_alloc+0x1b/0x50 seq_read+0x2cc/0x370 @@ -1026,7 +1026,7 @@ Extended error information First we set up an initially paused stacktrace trigger on the netif_receive_skb event:: - # echo 'hist:key=stacktrace:vals=len:pause' > \ + # echo 'hist:key=common_stacktrace:vals=len:pause' > \ /sys/kernel/tracing/events/net/netif_receive_skb/trigger Next, we set up an 'enable_hist' trigger on the sched_process_exec @@ -1060,9 +1060,9 @@ Extended error information $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist - # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1079,7 +1079,7 @@ Extended error information kthread+0xd2/0xf0 ret_from_fork+0x42/0x70 } hitcount: 85 len: 28884 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1097,7 +1097,7 @@ Extended error information irq_thread+0x11f/0x150 kthread+0xd2/0xf0 } hitcount: 98 len: 664329 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 process_backlog+0xa8/0x150 @@ -1115,7 +1115,7 @@ Extended error information inet_sendmsg+0x64/0xa0 sock_sendmsg+0x3d/0x50 } hitcount: 115 len: 13030 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1142,14 +1142,14 @@ Extended error information into the histogram. In order to avoid having to set everything up again, we can just clear the histogram first:: - # echo 'hist:key=stacktrace:vals=len:clear' >> \ + # echo 'hist:key=common_stacktrace:vals=len:clear' >> \ /sys/kernel/tracing/events/net/netif_receive_skb/trigger Just to verify that it is in fact cleared, here's what we now see in the hist file:: # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist - # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] Totals: Hits: 0 @@ -1485,12 +1485,12 @@ Extended error information And here's an example that shows how to combine histogram data from any two events even if they don't share any 'compatible' fields - other than 'hitcount' and 'stacktrace'. These commands create a + other than 'hitcount' and 'common_stacktrace'. These commands create a couple of triggers named 'bar' using those fields:: - # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ /sys/kernel/tracing/events/sched/sched_process_fork/trigger - # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ /sys/kernel/tracing/events/net/netif_rx/trigger And displaying the output of either shows some interesting if @@ -1501,16 +1501,16 @@ Extended error information # event histogram # - # trigger info: hist:name=bar:keys=stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] + # trigger info: hist:name=bar:keys=common_stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] # - { stacktrace: + { common_stacktrace: kernel_clone+0x18e/0x330 kernel_thread+0x29/0x30 kthreadd+0x154/0x1b0 ret_from_fork+0x3f/0x70 } hitcount: 1 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx_ni+0x20/0x70 dev_loopback_xmit+0xaa/0xd0 @@ -1528,7 +1528,7 @@ Extended error information call_cpuidle+0x3b/0x60 cpu_startup_entry+0x22d/0x310 } hitcount: 1 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx_ni+0x20/0x70 dev_loopback_xmit+0xaa/0xd0 @@ -1543,7 +1543,7 @@ Extended error information SyS_sendto+0xe/0x10 entry_SYSCALL_64_fastpath+0x12/0x6a } hitcount: 2 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1561,7 +1561,7 @@ Extended error information sock_sendmsg+0x38/0x50 ___sys_sendmsg+0x14e/0x270 } hitcount: 76 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1579,7 +1579,7 @@ Extended error information sock_sendmsg+0x38/0x50 ___sys_sendmsg+0x269/0x270 } hitcount: 77 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1597,7 +1597,7 @@ Extended error information sock_sendmsg+0x38/0x50 SYSC_sendto+0xef/0x170 } hitcount: 88 - { stacktrace: + { common_stacktrace: kernel_clone+0x18e/0x330 SyS_clone+0x19/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a @@ -1949,7 +1949,7 @@ uninterruptible state:: # cd /sys/kernel/tracing # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events - # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 2' >> events/sched/sched_switch/trigger + # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=common_stacktrace if prev_state == 2' >> events/sched/sched_switch/trigger # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger # echo 1 > events/synthetic/block_lat/enable # cat trace diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst index ea25a9220f92..5092d6c13af5 100644 --- a/Documentation/trace/index.rst +++ b/Documentation/trace/index.rst @@ -13,6 +13,7 @@ Linux Tracing Technologies kprobes kprobetrace uprobetracer + fprobetrace tracepoints events events-kmem diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst index 651f9ab53f3e..8a2dfee38145 100644 --- a/Documentation/trace/kprobetrace.rst +++ b/Documentation/trace/kprobetrace.rst @@ -66,6 +66,8 @@ Synopsis of kprobe_events (\*3) this is useful for fetching a field of data structures. (\*4) "u" means user-space dereference. See :ref:`user_mem_access`. +.. _kprobetrace_types: + Types ----- Several types are supported for fetchargs. Kprobe tracer will access memory diff --git a/Documentation/trace/timerlat-tracer.rst b/Documentation/trace/timerlat-tracer.rst index db17df312bc8..53a56823e903 100644 --- a/Documentation/trace/timerlat-tracer.rst +++ b/Documentation/trace/timerlat-tracer.rst @@ -180,3 +180,81 @@ dummy_load_1ms_pd_init, which had the following code (on purpose):: return 0; } + +User-space interface +--------------------------- + +Timerlat allows user-space threads to use timerlat infra-structure to +measure scheduling latency. This interface is accessible via a per-CPU +file descriptor inside $tracing_dir/osnoise/per_cpu/cpu$ID/timerlat_fd. + +This interface is accessible under the following conditions: + + - timerlat tracer is enable + - osnoise workload option is set to NO_OSNOISE_WORKLOAD + - The user-space thread is affined to a single processor + - The thread opens the file associated with its single processor + - Only one thread can access the file at a time + +The open() syscall will fail if any of these conditions are not met. +After opening the file descriptor, the user space can read from it. + +The read() system call will run a timerlat code that will arm the +timer in the future and wait for it as the regular kernel thread does. + +When the timer IRQ fires, the timerlat IRQ will execute, report the +IRQ latency and wake up the thread waiting in the read. The thread will be +scheduled and report the thread latency via tracer - as for the kernel +thread. + +The difference from the in-kernel timerlat is that, instead of re-arming +the timer, timerlat will return to the read() system call. At this point, +the user can run any code. + +If the application rereads the file timerlat file descriptor, the tracer +will report the return from user-space latency, which is the total +latency. If this is the end of the work, it can be interpreted as the +response time for the request. + +After reporting the total latency, timerlat will restart the cycle, arm +a timer, and go to sleep for the following activation. + +If at any time one of the conditions is broken, e.g., the thread migrates +while in user space, or the timerlat tracer is disabled, the SIG_KILL +signal will be sent to the user-space thread. + +Here is an basic example of user-space code for timerlat:: + + int main(void) + { + char buffer[1024]; + int timerlat_fd; + int retval; + long cpu = 0; /* place in CPU 0 */ + cpu_set_t set; + + CPU_ZERO(&set); + CPU_SET(cpu, &set); + + if (sched_setaffinity(gettid(), sizeof(set), &set) == -1) + return 1; + + snprintf(buffer, sizeof(buffer), + "/sys/kernel/tracing/osnoise/per_cpu/cpu%ld/timerlat_fd", + cpu); + + timerlat_fd = open(buffer, O_RDONLY); + if (timerlat_fd < 0) { + printf("error opening %s: %s\n", buffer, strerror(errno)); + exit(1); + } + + for (;;) { + retval = read(timerlat_fd, buffer, 1024); + if (retval < 0) + break; + } + + close(timerlat_fd); + exit(0); + } diff --git a/Documentation/trace/user_events.rst b/Documentation/trace/user_events.rst index f79987e16cf4..e7b07313550a 100644 --- a/Documentation/trace/user_events.rst +++ b/Documentation/trace/user_events.rst @@ -14,10 +14,6 @@ Programs can view status of the events via /sys/kernel/tracing/user_events_status and can both register and write data out via /sys/kernel/tracing/user_events_data. -Programs can also use /sys/kernel/tracing/dynamic_events to register and -delete user based events via the u: prefix. The format of the command to -dynamic_events is the same as the ioctl with the u: prefix applied. - Typically programs will register a set of events that they wish to expose to tools that can read trace_events (such as ftrace and perf). The registration process tells the kernel which address and bit to reflect if any tool has @@ -144,6 +140,9 @@ its name. Delete will only succeed if there are no references left to the event (in both user and kernel space). User programs should use a separate file to request deletes than the one used for registration due to this. +**NOTE:** By default events will auto-delete when there are no references left +to the event. Flags in the future may change this logic. + Unregistering ------------- If after registering an event it is no longer wanted to be updated then it can diff --git a/Documentation/translations/zh_CN/arm/Booting b/Documentation/translations/zh_CN/arch/arm/Booting index 5ecea0767893..f18585156b67 100644 --- a/Documentation/translations/zh_CN/arm/Booting +++ b/Documentation/translations/zh_CN/arch/arm/Booting @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm/booting.rst +Chinese translated version of Documentation/arch/arm/booting.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Russell King <linux@arm.linux.org.uk> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/arm/booting.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm/booting.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt b/Documentation/translations/zh_CN/arch/arm/kernel_user_helpers.txt index 99af4363984d..018eb7d54233 100644 --- a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt +++ b/Documentation/translations/zh_CN/arch/arm/kernel_user_helpers.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm/kernel_user_helpers.rst +Chinese translated version of Documentation/arch/arm/kernel_user_helpers.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ Maintainer: Nicolas Pitre <nicolas.pitre@linaro.org> Dave Martin <dave.martin@linaro.org> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/arm/kernel_user_helpers.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm/kernel_user_helpers.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm64/amu.rst b/Documentation/translations/zh_CN/arch/arm64/amu.rst index ab7180f91394..f8e09fd21ef5 100644 --- a/Documentation/translations/zh_CN/arm64/amu.rst +++ b/Documentation/translations/zh_CN/arch/arm64/amu.rst @@ -1,6 +1,6 @@ -.. include:: ../disclaimer-zh_CN.rst +.. include:: ../../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/arm64/amu.rst <amu_index>` +:Original: :ref:`Documentation/arch/arm64/amu.rst <amu_index>` Translator: Bailu Lin <bailu.lin@vivo.com> diff --git a/Documentation/translations/zh_CN/arm64/booting.txt b/Documentation/translations/zh_CN/arch/arm64/booting.txt index 5b0164132c71..630eb32a8854 100644 --- a/Documentation/translations/zh_CN/arm64/booting.txt +++ b/Documentation/translations/zh_CN/arch/arm64/booting.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm64/booting.rst +Chinese translated version of Documentation/arch/arm64/booting.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ M: Will Deacon <will.deacon@arm.com> zh_CN: Fu Wei <wefu@redhat.com> C: 55f058e7574c3615dea4615573a19bdb258696c6 --------------------------------------------------------------------- -Documentation/arm64/booting.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm64/booting.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm64/elf_hwcaps.rst b/Documentation/translations/zh_CN/arch/arm64/elf_hwcaps.rst index 9aa4637eac97..f60ac1580d3e 100644 --- a/Documentation/translations/zh_CN/arm64/elf_hwcaps.rst +++ b/Documentation/translations/zh_CN/arch/arm64/elf_hwcaps.rst @@ -1,6 +1,6 @@ -.. include:: ../disclaimer-zh_CN.rst +.. include:: ../../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/arm64/elf_hwcaps.rst <elf_hwcaps_index>` +:Original: :ref:`Documentation/arch/arm64/elf_hwcaps.rst <elf_hwcaps_index>` Translator: Bailu Lin <bailu.lin@vivo.com> @@ -92,7 +92,7 @@ HWCAP_ASIMDHP ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_CPUID - æ ¹æ® Documentation/arm64/cpu-feature-registers.rst æ述，EL0 å¯ä»¥è®¿é—® + æ ¹æ® Documentation/arch/arm64/cpu-feature-registers.rst æ述，EL0 å¯ä»¥è®¿é—® æŸäº› ID 寄å˜å™¨ã€‚ 这些 ID 寄å˜å™¨å¯èƒ½è¡¨ç¤ºåŠŸèƒ½çš„å¯ç”¨æ€§ã€‚ @@ -152,12 +152,12 @@ HWCAP_SB ID_AA64ISAR1_EL1.SB == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_PACA - 如 Documentation/arm64/pointer-authentication.rst 所æ述， + 如 Documentation/arch/arm64/pointer-authentication.rst 所æ述， ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_PACG - 如 Documentation/arm64/pointer-authentication.rst 所æ述， + 如 Documentation/arch/arm64/pointer-authentication.rst 所æ述， ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ diff --git a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst b/Documentation/translations/zh_CN/arch/arm64/hugetlbpage.rst index 13304d269d0b..8079eadde29a 100644 --- a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst +++ b/Documentation/translations/zh_CN/arch/arm64/hugetlbpage.rst @@ -1,6 +1,6 @@ -.. include:: ../disclaimer-zh_CN.rst +.. include:: ../../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>` +:Original: :ref:`Documentation/arch/arm64/hugetlbpage.rst <hugetlbpage_index>` Translator: Bailu Lin <bailu.lin@vivo.com> diff --git a/Documentation/translations/zh_CN/arm64/index.rst b/Documentation/translations/zh_CN/arch/arm64/index.rst index 57dc5de5ccc5..e12b9f6e5d6c 100644 --- a/Documentation/translations/zh_CN/arm64/index.rst +++ b/Documentation/translations/zh_CN/arch/arm64/index.rst @@ -1,6 +1,6 @@ -.. include:: ../disclaimer-zh_CN.rst +.. include:: ../../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/arm64/index.rst <arm64_index>` +:Original: :ref:`Documentation/arch/arm64/index.rst <arm64_index>` :Translator: Bailu Lin <bailu.lin@vivo.com> .. _cn_arm64_index: diff --git a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt b/Documentation/translations/zh_CN/arch/arm64/legacy_instructions.txt index e295cf75f606..e469fccbe356 100644 --- a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt +++ b/Documentation/translations/zh_CN/arch/arm64/legacy_instructions.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm64/legacy_instructions.rst +Chinese translated version of Documentation/arch/arm64/legacy_instructions.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ Maintainer: Punit Agrawal <punit.agrawal@arm.com> Suzuki K. Poulose <suzuki.poulose@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> --------------------------------------------------------------------- -Documentation/arm64/legacy_instructions.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm64/legacy_instructions.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm64/memory.txt b/Documentation/translations/zh_CN/arch/arm64/memory.txt index be20f8228b91..c6962e9cb9f8 100644 --- a/Documentation/translations/zh_CN/arm64/memory.txt +++ b/Documentation/translations/zh_CN/arch/arm64/memory.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm64/memory.rst +Chinese translated version of Documentation/arch/arm64/memory.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Catalin Marinas <catalin.marinas@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> --------------------------------------------------------------------- -Documentation/arm64/memory.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm64/memory.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm64/perf.rst b/Documentation/translations/zh_CN/arch/arm64/perf.rst index 9bf21d73f4d1..6be72704e659 100644 --- a/Documentation/translations/zh_CN/arm64/perf.rst +++ b/Documentation/translations/zh_CN/arch/arm64/perf.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_CN.rst +.. include:: ../../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/arm64/perf.rst <perf_index>` +:Original: :ref:`Documentation/arch/arm64/perf.rst <perf_index>` Translator: Bailu Lin <bailu.lin@vivo.com> diff --git a/Documentation/translations/zh_CN/arm64/silicon-errata.txt b/Documentation/translations/zh_CN/arch/arm64/silicon-errata.txt index 440c59ac7dce..f4767ffdd61d 100644 --- a/Documentation/translations/zh_CN/arm64/silicon-errata.txt +++ b/Documentation/translations/zh_CN/arch/arm64/silicon-errata.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm64/silicon-errata.rst +Chinese translated version of Documentation/arch/arm64/silicon-errata.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ M: Will Deacon <will.deacon@arm.com> zh_CN: Fu Wei <wefu@redhat.com> C: 1926e54f115725a9248d0c4c65c22acaf94de4c4 --------------------------------------------------------------------- -Documentation/arm64/silicon-errata.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm64/silicon-errata.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt b/Documentation/translations/zh_CN/arch/arm64/tagged-pointers.txt index 77ac3548a16d..27577c3c5e3f 100644 --- a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt +++ b/Documentation/translations/zh_CN/arch/arm64/tagged-pointers.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/arm64/tagged-pointers.rst +Chinese translated version of Documentation/arch/arm64/tagged-pointers.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Will Deacon <will.deacon@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> --------------------------------------------------------------------- -Documentation/arm64/tagged-pointers.rst çš„ä¸æ–‡ç¿»è¯‘ +Documentation/arch/arm64/tagged-pointers.rst çš„ä¸æ–‡ç¿»è¯‘ 如果想评论或更新本文的内容，请直接è”ç³»åŽŸæ–‡æ¡£çš„ç»´æŠ¤è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°éš¾çš„è¯ï¼Œä¹Ÿå¯ä»¥å‘ä¸æ–‡ç‰ˆç»´æŠ¤è€…求助。如果本翻译更新ä¸åŠæ—¶æˆ–者翻 diff --git a/Documentation/translations/zh_CN/arch/index.rst b/Documentation/translations/zh_CN/arch/index.rst index 908ea131bb1c..6fa0cb671009 100644 --- a/Documentation/translations/zh_CN/arch/index.rst +++ b/Documentation/translations/zh_CN/arch/index.rst @@ -9,7 +9,7 @@ :maxdepth: 2 ../mips/index - ../arm64/index + arm64/index ../riscv/index openrisc/index parisc/index diff --git a/Documentation/translations/zh_CN/devicetree/usage-model.rst b/Documentation/translations/zh_CN/devicetree/usage-model.rst index c6aee82c7e6e..19ba4ae0cd81 100644 --- a/Documentation/translations/zh_CN/devicetree/usage-model.rst +++ b/Documentation/translations/zh_CN/devicetree/usage-model.rst @@ -325,6 +325,6 @@ Primecell设备。然而，棘手的一点是，AMBA总线上的所有设备并é 当使用DT时，这给of_platform_populate()带æ¥äº†é—®é¢˜ï¼Œå› 为它必须决定是å¦å°† æ¯ä¸ªèŠ‚点注册为platform_device或amba_device。ä¸å¹¸çš„是，这使设备创建模型 -å˜å¾—有点å¤æ‚，但解决方案原æ¥å¹¶ä¸æ˜¯å¤ªå…·æœ‰ä¾µç•¥æ€§ã€‚如果一个节点与“arm,amba-primecell†+å˜å¾—有点å¤æ‚，但解决方案原æ¥å¹¶ä¸æ˜¯å¤ªå…·æœ‰ä¾µç•¥æ€§ã€‚如果一个节点与“arm,primecell†兼容，那么of_platform_populate()将把它注册为amba_device而ä¸æ˜¯ platform_device。 diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst index 84ce2322fdba..aeccff777170 100644 --- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst +++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst @@ -153,8 +153,7 @@ get/set(获å–/设置)函数调用没法返回错误,且有å¯èƒ½æ˜¯é…置错误 大多数 GPIO 控制器å¯ä»¥é€šè¿‡å†…å˜è¯»/写指令æ¥è®¿é—®ã€‚这些指令ä¸ä¼šä¼‘çœ ,å¯ä»¥ 安全地在硬(éžçº¿ç¨‹)ä¸æ–例程和类似的上下文ä¸å®Œæˆã€‚ -对于那些用 gpio_cansleep()测试总是返回失败的 GPIO(è§ä¸‹æ–‡)，使用 -以下的函数访问:: +对于那些 GPIO，使用以下的函数访问:: /* GPIO 输入:返回零或éžé›¶ */ int gpio_get_value(unsigned gpio); @@ -186,11 +185,6 @@ GPIO值是布尔值，零表示低电平，éžé›¶è¡¨ç¤ºé«˜ç”µå¹³ã€‚当读å–一ä GPIO 值的命令需è¦ç‰å¾…其信æ¯æŽ’到队首æ‰å‘é€å‘½ä»¤ï¼Œå†èŽ·å¾—å…¶åé¦ˆã€‚æœŸé—´éœ€è¦ ä¼‘çœ ï¼Œè¿™ä¸èƒ½åœ¨ IRQ 例程(ä¸æ–上下文)ä¸æ‰§è¡Œã€‚ -支æŒæ¤ç±» GPIO çš„å¹³å°é€šè¿‡ä»¥ä¸‹å‡½æ•°è¿”回éžé›¶å€¼æ¥åŒºåˆ†å‡ºè¿™ç§ GPIO。(æ¤å‡½æ•°éœ€è¦ -一个之å‰é€šè¿‡ gpio_request 分é…到的有效 GPIO ç¼–å·):: - - int gpio_cansleep(unsigned gpio); - ä¸ºäº†è®¿é—®è¿™ç§ GPIO,å†…æ ¸å®šä¹‰äº†ä¸€å¥—ä¸åŒçš„函数:: /* GPIO 输入:返回零或éžé›¶ ,å¯èƒ½ä¼šä¼‘çœ */ @@ -199,7 +193,6 @@ GPIO 值的命令需è¦ç‰å¾…其信æ¯æŽ’到队首æ‰å‘é€å‘½ä»¤ï¼Œå†èŽ·å¾—å…¶ /* GPIO 输出,å¯èƒ½ä¼šä¼‘çœ */ void gpio_set_value_cansleep(unsigned gpio, int value); - è®¿é—®è¿™æ ·çš„ GPIO 需è¦ä¸€ä¸ªå…è®¸ä¼‘çœ çš„ä¸Šä¸‹æ–‡ï¼Œä¾‹å¦‚çº¿ç¨‹ IRQ 处ç†ä¾‹ç¨‹ï¼Œå¹¶ç”¨ä»¥ä¸Šçš„ 访问函数替æ¢é‚£äº›æ²¡æœ‰ cansleep()åŽç¼€çš„自旋é”安全访问函数。 @@ -294,11 +287,6 @@ gpio_request()å‰å°†è¿™ç±»ç»†èŠ‚é…置好，例如使用引脚控制å系统的 * GPIOF_INIT_LOW - 在作为输出时,åˆå§‹å€¼ä¸ºä½Žç”µå¹³ * GPIOF_INIT_HIGH - 在作为输出时,åˆå§‹å€¼ä¸ºé«˜ç”µå¹³ - * GPIOF_OPEN_DRAIN - gpio引脚为开æ¼ä¿¡å· - * GPIOF_OPEN_SOURCE - gpio引脚为æºæžå¼€è·¯ä¿¡å· - - * GPIOF_EXPORT_DIR_FIXED - å°† gpio 导出到 sysfs，并ä¿æŒæ–¹å‘ - * GPIOF_EXPORT_DIR_CHANGEABLE - åŒæ ·æ˜¯å¯¼å‡º, 但å…许改å˜æ–¹å‘ å› ä¸º GPIOF_INIT_* 仅有在é…置为输出的时候æ‰å˜åœ¨,所以有效的组åˆä¸º: @@ -306,18 +294,6 @@ gpio_request()å‰å°†è¿™ç±»ç»†èŠ‚é…置好，例如使用引脚控制å系统的 * GPIOF_OUT_INIT_LOW - é…置为输出,并åˆå§‹åŒ–为低电平 * GPIOF_OUT_INIT_HIGH - é…置为输出,并åˆå§‹åŒ–为高电平 -当设置 flag 为 GPIOF_OPEN_DRAIN 时，则å‡è®¾å¼•è„šæ˜¯å¼€æ¼ä¿¡å·ã€‚è¿™æ ·çš„å¼•è„š -å°†ä¸ä¼šåœ¨è¾“出模å¼ä¸‹ç½®1ã€‚è¿™æ ·çš„å¼•è„šéœ€è¦è¿žæŽ¥ä¸Šæ‹‰ç”µé˜»ã€‚é€šè¿‡ä½¿èƒ½è¿™ä¸ªæ ‡å¿—ï¼Œgpio库 -将会在被è¦æ±‚输出模å¼ä¸‹ç½®1时将引脚å˜ä¸ºè¾“入状æ€æ¥ä½¿å¼•è„šç½®é«˜ã€‚引脚在输出模å¼ä¸‹ -通过置0使其输出低电平。 - -当设置 flag 为 GPIOF_OPEN_SOURCE 时，则å‡è®¾å¼•è„šä¸ºæºæžå¼€è·¯ä¿¡å·ã€‚è¿™æ ·çš„å¼•è„š -å°†ä¸ä¼šåœ¨è¾“出模å¼ä¸‹ç½®0ã€‚è¿™æ ·çš„å¼•è„šéœ€è¦è¿žæŽ¥ä¸‹æ‹‰ç”µé˜»ã€‚é€šè¿‡ä½¿èƒ½è¿™ä¸ªæ ‡å¿—ï¼Œgpio库 -将会在被è¦æ±‚输出模å¼ä¸‹ç½®0时将引脚å˜ä¸ºè¾“入状æ€æ¥ä½¿å¼•è„šç½®ä½Žã€‚引脚在输出模å¼ä¸‹ -通过置1使其输出高电平。 - -å°†æ¥è¿™äº›æ ‡å¿—å¯èƒ½æ‰©å±•åˆ°æ”¯æŒæ›´å¤šçš„属性。 - 更进一æ¥,为了更简å•åœ°å£°æ˜Ž/释放多个 GPIO,'struct gpio'被引进æ¥å°è£…所有 这三个领域:: @@ -500,8 +476,8 @@ GPIO 实现者的框架（å¯é€‰ï¼‰ 为了支æŒè¿™ä¸ªæ¡†æž¶ï¼Œä¸€ä¸ªå¹³å°çš„ Kconfig 文件将会 "select"(选择) ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，并让它的 -<asm/gpio.h> åŒ…å« <asm-generic/gpio.h>，åŒæ—¶å®šä¹‰ä¸‰ä¸ªæ–¹æ³•: -gpio_get_value()ã€gpio_set_value()å’Œ gpio_cansleep()。 +<asm/gpio.h> åŒ…å« <asm-generic/gpio.h>，åŒæ—¶å®šä¹‰ä¸¤ä¸ªæ–¹æ³•: +gpio_get_value()ã€gpio_set_value()。 它也应æ供一个 ARCH_NR_GPIOS çš„å®šä¹‰å€¼ï¼Œè¿™æ ·å¯ä»¥æ›´å¥½åœ°åæ˜ è¯¥å¹³å° GPIO 的实际数é‡,节çœé™æ€è¡¨çš„空间。(这个定义值应该包å«ç‰‡ä¸Šç³»ç»Ÿå†…建 GPIO å’Œ @@ -519,7 +495,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB æ„å‘³ç€ gpiolib æ ¸å¿ƒé»˜è®¤å…³é—,且用户å¯ä»¥ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value - #define gpio_cansleep __gpio_cansleep 这些定义å¯ä»¥ç”¨æ›´ç†æƒ³çš„实现方法替代，那就是使用ç»è¿‡é€»è¾‘优化的内è”函数æ¥è®¿é—® 基于特定片上系统的 GPIO。例如,若引用的 GPIO (寄å˜å™¨ä½å移)是常é‡â€œ12â€ï¼Œ diff --git a/Documentation/translations/zh_CN/mm/page_migration.rst b/Documentation/translations/zh_CN/mm/page_migration.rst index 076081dc1635..f95063826a15 100644 --- a/Documentation/translations/zh_CN/mm/page_migration.rst +++ b/Documentation/translations/zh_CN/mm/page_migration.rst @@ -55,7 +55,7 @@ mbind()设置一个新的内å˜ç–略。一个进程的页é¢ä¹Ÿå¯ä»¥é€šè¿‡sys_ 消失。它还å¯ä»¥é˜²æ¢äº¤æ¢å™¨æˆ–其他扫æ器é‡åˆ°è¯¥é¡µã€‚ -2. 我们需è¦æœ‰ä¸€ä¸ªnew_page_t类型的函数，å¯ä»¥ä¼ 递给migrate_pages()。这个函数应该计算 +2. 我们需è¦æœ‰ä¸€ä¸ªnew_folio_t类型的函数，å¯ä»¥ä¼ 递给migrate_pages()。这个函数应该计算 出如何在给定的旧页é¢ä¸åˆ†é…æ£ç¡®çš„新页é¢ã€‚ 3. migrate_pages()函数被调用，它试图进行è¿ç§»ã€‚它将调用该函数为æ¯ä¸ªè¢«è€ƒè™‘è¿ç§»çš„页é¢åˆ† diff --git a/Documentation/translations/zh_CN/process/2.Process.rst b/Documentation/translations/zh_CN/process/2.Process.rst index 4a6ed0219494..e68c9de0f7f8 100644 --- a/Documentation/translations/zh_CN/process/2.Process.rst +++ b/Documentation/translations/zh_CN/process/2.Process.rst @@ -358,7 +358,7 @@ Andrew Morton ä¸ºæœ‰æŠ±è´Ÿçš„å†…æ ¸å¼€å‘人员æ供了如下建议 机器上始终完美è¿è¡Œâ€ã€‚通常的方法是和其他人一起解决问题（这å¯èƒ½éœ€ è¦åšæŒï¼ï¼‰ï¼Œä½†å°±æ˜¯å¦‚æ¤â€”â€”è¿™æ˜¯å†…æ ¸å¼€å‘的一部分。 -(http://lwn.net/articles/283982/) +(http://lwn.net/Articles/283982/) 在没有明显问题需è¦è§£å†³çš„情况下，通常建议开å‘人员查看当å‰çš„回归和开放缺陷 列表。从æ¥éƒ½ä¸ç¼ºå°‘需è¦è§£å†³çš„问题；通过解决这些问题，开å‘人员将从该过程获得 diff --git a/Documentation/translations/zh_CN/process/3.Early-stage.rst b/Documentation/translations/zh_CN/process/3.Early-stage.rst index de53dd12e911..2caba4753b75 100644 --- a/Documentation/translations/zh_CN/process/3.Early-stage.rst +++ b/Documentation/translations/zh_CN/process/3.Early-stage.rst @@ -44,7 +44,7 @@ 试图å‘è¿™äº›äººä¼ è¾¾ç”¨æˆ·éœ€æ±‚æ˜¯æµªè´¹æ—¶é—´ã€‚ä»–ä»¬å¤ªâ€œèªæ˜Žâ€äº†ï¼Œæ ¹æœ¬å¬ä¸åˆ°å°‘æ•° 人的è¯ã€‚ -（http://lwn.net/articles/131776/） +（http://lwn.net/Articles/131776/） 实际情况å´æ˜¯ä¸åŒçš„；与特定模å—ç›¸æ¯”ï¼Œå†…æ ¸å¼€å‘人员更关心系统稳定性ã€é•¿æœŸç»´æŠ¤ 以åŠæ‰¾åˆ°é—®é¢˜çš„æ£ç¡®è§£å†³æ–¹æ¡ˆã€‚这个故事的寓æ„是把é‡ç‚¹æ”¾åœ¨é—®é¢˜ä¸Šâ€”—而ä¸æ˜¯å…·ä½“çš„ diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst index 94f7f866f103..7cac9424f5d5 100644 --- a/Documentation/translations/zh_CN/process/4.Coding.rst +++ b/Documentation/translations/zh_CN/process/4.Coding.rst @@ -149,7 +149,7 @@ Linus对这个问题给出了最佳ç”案: 所以我们ä¸ä¼šé€šè¿‡å¼•å…¥æ–°é—®é¢˜æ¥ä¿®å¤é”™è¯¯ã€‚è¿™ç§æ–¹å¼æ˜¯é ä¸ä½çš„ï¼Œæ²¡äººçŸ¥é“ æ˜¯å¦çœŸçš„有进展。是å‰è¿›ä¸¤æ¥ã€åŽé€€ä¸€æ¥ï¼Œè¿˜æ˜¯å‰è¿›ä¸€æ¥ã€åŽé€€ä¸¤æ¥ï¼Ÿ -（http://lwn.net/articles/243460/） +（http://lwn.net/Articles/243460/） 特别ä¸å—欢迎的一ç§å›žå½’类型是用户空间ABI的任何å˜åŒ–。一旦接å£è¢«å¯¼å‡ºåˆ°ç”¨æˆ·ç©ºé—´ï¼Œ å°±å¿…é¡»æ— é™æœŸåœ°æ”¯æŒå®ƒã€‚这一事实使得用户空间接å£çš„åˆ›å»ºç‰¹åˆ«å…·æœ‰æŒ‘æˆ˜æ€§ï¼šå› ä¸ºå®ƒä»¬ diff --git a/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst b/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst index 6d0dadae13b1..57beca02181c 100644 --- a/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst +++ b/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst @@ -98,7 +98,7 @@ Gitæ供了一些强大的工具，å¯ä»¥è®©æ‚¨é‡å†™å¼€å‘历å²ã€‚一个ä¸æ– ä½ å¯ä»¥ç»™æˆ‘å‘è¡¥ä¸ï¼Œä½†å½“æˆ‘ä»Žä½ é‚£é‡Œæ‹‰å–一个Gitè¡¥ä¸æ—¶ï¼Œæˆ‘需è¦çŸ¥é“ä½ æ¸…æ¥š 自己在åšä»€ä¹ˆï¼Œæˆ‘需è¦èƒ½å¤Ÿç›¸ä¿¡äº‹æƒ…而 *æ— éœ€* 手动检查æ¯ä¸ªå•ç‹¬çš„更改。 -（http://lwn.net/articles/224135/）。 +（http://lwn.net/Articles/224135/）。 为了é¿å…è¿™ç§æƒ…况，请确ä¿ç»™å®šåˆ†æ”¯ä¸çš„所有补ä¸éƒ½ä¸Žç›¸å…³ä¸»é¢˜ç´§å¯†ç›¸å…³ï¼›â€œé©±åŠ¨ç¨‹åº ä¿®å¤â€åˆ†æ”¯ä¸åº”æ›´æ”¹æ ¸å¿ƒå†…å˜ç®¡ç†ä»£ç 。而且，最é‡è¦çš„是，ä¸è¦ä½¿ç”¨Gitæ ‘æ¥ç»•è¿‡ diff --git a/Documentation/translations/zh_TW/arm64/amu.rst b/Documentation/translations/zh_TW/arch/arm64/amu.rst index ffdc466e0f62..f947a6c7369f 100644 --- a/Documentation/translations/zh_TW/arm64/amu.rst +++ b/Documentation/translations/zh_TW/arch/arm64/amu.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_TW.rst +.. include:: ../../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/arm64/amu.rst <amu_index>` +:Original: :ref:`Documentation/arch/arm64/amu.rst <amu_index>` Translator: Bailu Lin <bailu.lin@vivo.com> Hu Haowen <src.res@email.cn> diff --git a/Documentation/translations/zh_TW/arm64/booting.txt b/Documentation/translations/zh_TW/arch/arm64/booting.txt index b9439dd54012..24817b8b70cd 100644 --- a/Documentation/translations/zh_TW/arm64/booting.txt +++ b/Documentation/translations/zh_TW/arch/arm64/booting.txt @@ -1,6 +1,6 @@ SPDX-License-Identifier: GPL-2.0 -Chinese translated version of Documentation/arm64/booting.rst +Chinese translated version of Documentation/arch/arm64/booting.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -13,7 +13,7 @@ zh_CN: Fu Wei <wefu@redhat.com> zh_TW: Hu Haowen <src.res@email.cn> C: 55f058e7574c3615dea4615573a19bdb258696c6 --------------------------------------------------------------------- -Documentation/arm64/booting.rst çš„ä¸æ–‡ç¿»è¯ +Documentation/arch/arm64/booting.rst çš„ä¸æ–‡ç¿»è¯ 如果想評論或更新本文的內容，請直接è¯ç¹«åŽŸæ–‡æª”çš„ç¶è·è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°é›£çš„話，也å¯ä»¥å‘ä¸æ–‡ç‰ˆç¶è·è€…求助。如果本翻è¯æ›´æ–°ä¸åŠæ™‚或者翻 diff --git a/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst b/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst index 3eb1c623ce31..fca3c6ff7b93 100644 --- a/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst +++ b/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_TW.rst +.. include:: ../../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/arm64/elf_hwcaps.rst <elf_hwcaps_index>` +:Original: :ref:`Documentation/arch/arm64/elf_hwcaps.rst <elf_hwcaps_index>` Translator: Bailu Lin <bailu.lin@vivo.com> Hu Haowen <src.res@email.cn> @@ -95,7 +95,7 @@ HWCAP_ASIMDHP ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_CPUID - æ ¹æ“š Documentation/arm64/cpu-feature-registers.rst æ述，EL0 å¯ä»¥è¨ªå• + æ ¹æ“š Documentation/arch/arm64/cpu-feature-registers.rst æ述，EL0 å¯ä»¥è¨ªå• æŸäº› ID 寄å˜å™¨ã€‚ 這些 ID 寄å˜å™¨å¯èƒ½è¡¨ç¤ºåŠŸèƒ½çš„å¯ç”¨æ€§ã€‚ @@ -155,12 +155,12 @@ HWCAP_SB ID_AA64ISAR1_EL1.SB == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_PACA - 如 Documentation/arm64/pointer-authentication.rst 所æ述， + 如 Documentation/arch/arm64/pointer-authentication.rst 所æ述， ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ HWCAP_PACG - 如 Documentation/arm64/pointer-authentication.rst 所æ述， + 如 Documentation/arch/arm64/pointer-authentication.rst 所æ述， ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001 表示有æ¤åŠŸèƒ½ã€‚ diff --git a/Documentation/translations/zh_TW/arm64/hugetlbpage.rst b/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst index 846b500dae97..10feb329dfb8 100644 --- a/Documentation/translations/zh_TW/arm64/hugetlbpage.rst +++ b/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_TW.rst +.. include:: ../../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>` +:Original: :ref:`Documentation/arch/arm64/hugetlbpage.rst <hugetlbpage_index>` Translator: Bailu Lin <bailu.lin@vivo.com> Hu Haowen <src.res@email.cn> diff --git a/Documentation/translations/zh_TW/arm64/index.rst b/Documentation/translations/zh_TW/arch/arm64/index.rst index 2322783f3881..68befee14b99 100644 --- a/Documentation/translations/zh_TW/arm64/index.rst +++ b/Documentation/translations/zh_TW/arch/arm64/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_TW.rst +.. include:: ../../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/arm64/index.rst <arm64_index>` +:Original: :ref:`Documentation/arch/arm64/index.rst <arm64_index>` :Translator: Bailu Lin <bailu.lin@vivo.com> Hu Haowen <src.res@email.cn> diff --git a/Documentation/translations/zh_TW/arm64/legacy_instructions.txt b/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt index 6d4454f77b9e..3c915df9836c 100644 --- a/Documentation/translations/zh_TW/arm64/legacy_instructions.txt +++ b/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt @@ -1,6 +1,6 @@ SPDX-License-Identifier: GPL-2.0 -Chinese translated version of Documentation/arm64/legacy_instructions.rst +Chinese translated version of Documentation/arch/arm64/legacy_instructions.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -13,7 +13,7 @@ Maintainer: Punit Agrawal <punit.agrawal@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> Traditional Chinese maintainer: Hu Haowen <src.res@email.cn> --------------------------------------------------------------------- -Documentation/arm64/legacy_instructions.rst çš„ä¸æ–‡ç¿»è¯ +Documentation/arch/arm64/legacy_instructions.rst çš„ä¸æ–‡ç¿»è¯ 如果想評論或更新本文的內容，請直接è¯ç¹«åŽŸæ–‡æª”çš„ç¶è·è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°é›£çš„話，也å¯ä»¥å‘ä¸æ–‡ç‰ˆç¶è·è€…求助。如果本翻è¯æ›´æ–°ä¸åŠæ™‚或者翻 diff --git a/Documentation/translations/zh_TW/arm64/memory.txt b/Documentation/translations/zh_TW/arch/arm64/memory.txt index 99c2b78b5674..2437380a26d8 100644 --- a/Documentation/translations/zh_TW/arm64/memory.txt +++ b/Documentation/translations/zh_TW/arch/arm64/memory.txt @@ -1,6 +1,6 @@ SPDX-License-Identifier: GPL-2.0 -Chinese translated version of Documentation/arm64/memory.rst +Chinese translated version of Documentation/arch/arm64/memory.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -12,7 +12,7 @@ Maintainer: Catalin Marinas <catalin.marinas@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> Traditional Chinese maintainer: Hu Haowen <src.res@email.cn> --------------------------------------------------------------------- -Documentation/arm64/memory.rst çš„ä¸æ–‡ç¿»è¯ +Documentation/arch/arm64/memory.rst çš„ä¸æ–‡ç¿»è¯ 如果想評論或更新本文的內容，請直接è¯ç¹«åŽŸæ–‡æª”çš„ç¶è·è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°é›£çš„話，也å¯ä»¥å‘ä¸æ–‡ç‰ˆç¶è·è€…求助。如果本翻è¯æ›´æ–°ä¸åŠæ™‚或者翻 diff --git a/Documentation/translations/zh_TW/arm64/perf.rst b/Documentation/translations/zh_TW/arch/arm64/perf.rst index f1ffd55dfe50..3b39997a52eb 100644 --- a/Documentation/translations/zh_TW/arm64/perf.rst +++ b/Documentation/translations/zh_TW/arch/arm64/perf.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -.. include:: ../disclaimer-zh_TW.rst +.. include:: ../../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/arm64/perf.rst <perf_index>` +:Original: :ref:`Documentation/arch/arm64/perf.rst <perf_index>` Translator: Bailu Lin <bailu.lin@vivo.com> Hu Haowen <src.res@email.cn> diff --git a/Documentation/translations/zh_TW/arm64/silicon-errata.txt b/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt index bf2077197504..66c3a3506458 100644 --- a/Documentation/translations/zh_TW/arm64/silicon-errata.txt +++ b/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt @@ -1,6 +1,6 @@ SPDX-License-Identifier: GPL-2.0 -Chinese translated version of Documentation/arm64/silicon-errata.rst +Chinese translated version of Documentation/arch/arm64/silicon-errata.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -13,7 +13,7 @@ zh_CN: Fu Wei <wefu@redhat.com> zh_TW: Hu Haowen <src.res@email.cn> C: 1926e54f115725a9248d0c4c65c22acaf94de4c4 --------------------------------------------------------------------- -Documentation/arm64/silicon-errata.rst çš„ä¸æ–‡ç¿»è¯ +Documentation/arch/arm64/silicon-errata.rst çš„ä¸æ–‡ç¿»è¯ 如果想評論或更新本文的內容，請直接è¯ç¹«åŽŸæ–‡æª”çš„ç¶è·è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°é›£çš„話，也å¯ä»¥å‘ä¸æ–‡ç‰ˆç¶è·è€…求助。如果本翻è¯æ›´æ–°ä¸åŠæ™‚或者翻 diff --git a/Documentation/translations/zh_TW/arm64/tagged-pointers.txt b/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt index 87f88628401a..b7f683f20ed1 100644 --- a/Documentation/translations/zh_TW/arm64/tagged-pointers.txt +++ b/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt @@ -1,6 +1,6 @@ SPDX-License-Identifier: GPL-2.0 -Chinese translated version of Documentation/arm64/tagged-pointers.rst +Chinese translated version of Documentation/arch/arm64/tagged-pointers.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -12,7 +12,7 @@ Maintainer: Will Deacon <will.deacon@arm.com> Chinese maintainer: Fu Wei <wefu@redhat.com> Traditional Chinese maintainer: Hu Haowen <src.res@email.cn> --------------------------------------------------------------------- -Documentation/arm64/tagged-pointers.rst çš„ä¸æ–‡ç¿»è¯ +Documentation/arch/arm64/tagged-pointers.rst çš„ä¸æ–‡ç¿»è¯ 如果想評論或更新本文的內容，請直接è¯ç¹«åŽŸæ–‡æª”çš„ç¶è·è€…ã€‚å¦‚æžœä½ ä½¿ç”¨è‹±æ–‡ 交æµæœ‰å›°é›£çš„話，也å¯ä»¥å‘ä¸æ–‡ç‰ˆç¶è·è€…求助。如果本翻è¯æ›´æ–°ä¸åŠæ™‚或者翻 diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt index 62e560ffe628..b93788a2628b 100644 --- a/Documentation/translations/zh_TW/gpio.txt +++ b/Documentation/translations/zh_TW/gpio.txt @@ -161,8 +161,7 @@ get/set(ç²å–/è¨ç½®)函數調用沒法返回錯誤,且有å¯èƒ½æ˜¯é…置錯誤 大多數 GPIO 控制器å¯ä»¥é€šéŽå…§å˜è®€/寫指令來訪å•ã€‚這些指令ä¸æœƒä¼‘çœ ,å¯ä»¥ 安全地在硬(éžç·šç¨‹)ä¸æ–·ä¾‹ç¨‹å’Œé¡žä¼¼çš„上下文ä¸å®Œæˆã€‚ -å°æ–¼é‚£äº›ç”¨ gpio_cansleep()測試總是返回失敗的 GPIO(見下文)，使用 -以下的函數訪å•: +å°æ–¼é‚£äº› GPIO，使用以下的函數訪å•: /* GPIO 輸入:返回零或éžé›¶ */ int gpio_get_value(unsigned gpio); @@ -193,11 +192,6 @@ GPIO值是布爾值，零表示低電平，éžé›¶è¡¨ç¤ºé«˜é›»å¹³ã€‚當讀å–一å GPIO 值的命令需è¦ç‰å¾…其信æ¯æŽ’到隊首æ‰ç™¼é€å‘½ä»¤ï¼Œå†ç²å¾—å…¶åé¥‹ã€‚æœŸé–“éœ€è¦ ä¼‘çœ ï¼Œé€™ä¸èƒ½åœ¨ IRQ 例程(ä¸æ–·ä¸Šä¸‹æ–‡)ä¸åŸ·è¡Œã€‚ -支æŒæ¤é¡ž GPIO çš„å¹³å°é€šéŽä»¥ä¸‹å‡½æ•¸è¿”回éžé›¶å€¼ä¾†å€åˆ†å‡ºé€™ç¨® GPIO。(æ¤å‡½æ•¸éœ€è¦ -一個之å‰é€šéŽ gpio_request 分é…到的有效 GPIO 編號): - - int gpio_cansleep(unsigned gpio); - 爲了訪å•é€™ç¨® GPIO,å…§æ ¸å®šç¾©äº†ä¸€å¥—ä¸åŒçš„函數: /* GPIO 輸入:返回零或éžé›¶ ,å¯èƒ½æœƒä¼‘çœ */ @@ -206,7 +200,6 @@ GPIO 值的命令需è¦ç‰å¾…其信æ¯æŽ’到隊首æ‰ç™¼é€å‘½ä»¤ï¼Œå†ç²å¾—å…¶ /* GPIO 輸出,å¯èƒ½æœƒä¼‘çœ */ void gpio_set_value_cansleep(unsigned gpio, int value); - 訪å•é€™æ¨£çš„ GPIO 需è¦ä¸€å€‹å…è¨±ä¼‘çœ çš„ä¸Šä¸‹æ–‡ï¼Œä¾‹å¦‚ç·šç¨‹ IRQ 處ç†ä¾‹ç¨‹ï¼Œä¸¦ç”¨ä»¥ä¸Šçš„ 訪å•å‡½æ•¸æ›¿æ›é‚£äº›æ²’有 cansleep()後綴的自旋鎖安全訪å•å‡½æ•¸ã€‚ @@ -300,11 +293,6 @@ gpio_request()å‰å°‡é€™é¡žç´°ç¯€é…置好，例如使用 pinctrl åç³»çµ±çš„æ˜ * GPIOF_INIT_LOW - 在作爲輸出時,åˆå§‹å€¼çˆ²ä½Žé›»å¹³ * GPIOF_INIT_HIGH - 在作爲輸出時,åˆå§‹å€¼çˆ²é«˜é›»å¹³ - * GPIOF_OPEN_DRAIN - gpio引腳爲開æ¼ä¿¡è™Ÿ - * GPIOF_OPEN_SOURCE - gpio引腳爲æºæ¥µé–‹è·¯ä¿¡è™Ÿ - - * GPIOF_EXPORT_DIR_FIXED - å°‡ gpio 導出到 sysfs，並ä¿æŒæ–¹å‘ - * GPIOF_EXPORT_DIR_CHANGEABLE - åŒæ¨£æ˜¯å°Žå‡º, 但å…è¨±æ”¹è®Šæ–¹å‘ å› çˆ² GPIOF_INIT_* 僅有在é…置爲輸出的時候æ‰å˜åœ¨,所以有效的組åˆçˆ²: @@ -312,18 +300,6 @@ gpio_request()å‰å°‡é€™é¡žç´°ç¯€é…置好，例如使用 pinctrl åç³»çµ±çš„æ˜ * GPIOF_OUT_INIT_LOW - é…置爲輸出,並åˆå§‹åŒ–爲低電平 * GPIOF_OUT_INIT_HIGH - é…置爲輸出,並åˆå§‹åŒ–爲高電平 -當è¨ç½® flag 爲 GPIOF_OPEN_DRAIN 時，則å‡è¨å¼•è…³æ˜¯é–‹æ¼ä¿¡è™Ÿã€‚這樣的引腳 -å°‡ä¸æœƒåœ¨è¼¸å‡ºæ¨¡å¼ä¸‹ç½®1。這樣的引腳需è¦é€£æŽ¥ä¸Šæ‹‰é›»é˜»ã€‚通éŽä½¿èƒ½é€™å€‹æ¨™èªŒï¼Œgpio庫 -將會在被è¦æ±‚輸出模å¼ä¸‹ç½®1時將引腳變爲輸入狀態來使引腳置高。引腳在輸出模å¼ä¸‹ -通éŽç½®0使其輸出低電平。 - -當è¨ç½® flag 爲 GPIOF_OPEN_SOURCE 時，則å‡è¨å¼•è…³çˆ²æºæ¥µé–‹è·¯ä¿¡è™Ÿã€‚這樣的引腳 -å°‡ä¸æœƒåœ¨è¼¸å‡ºæ¨¡å¼ä¸‹ç½®0。這樣的引腳需è¦é€£æŽ¥ä¸‹æ‹‰é›»é˜»ã€‚通éŽä½¿èƒ½é€™å€‹æ¨™èªŒï¼Œgpio庫 -將會在被è¦æ±‚輸出模å¼ä¸‹ç½®0時將引腳變爲輸入狀態來使引腳置低。引腳在輸出模å¼ä¸‹ -通éŽç½®1使其輸出高電平。 - -將來這些標誌å¯èƒ½æ“´å±•åˆ°æ”¯æŒæ›´å¤šçš„屬性。 - 更進一æ¥,爲了更簡單地è²æ˜Ž/釋放多個 GPIO,'struct gpio'被引進來å°è£æ‰€æœ‰ é€™ä¸‰å€‹é ˜åŸŸ: @@ -466,8 +442,8 @@ GPIO 實ç¾è€…的框架 (å¯é¸) ------- 爲了支æŒé€™å€‹æ¡†æž¶ï¼Œä¸€å€‹å¹³å°çš„ Kconfig 文件將會 "select"(é¸æ“‡) ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，並讓它的 -<asm/gpio.h> åŒ…å« <asm-generic/gpio.h>，åŒæ™‚定義三個方法: -gpio_get_value()ã€gpio_set_value()å’Œ gpio_cansleep()。 +<asm/gpio.h> åŒ…å« <asm-generic/gpio.h>，åŒæ™‚定義二個方法: +gpio_get_value()ã€gpio_set_value()。 它也應æ供一個 ARCH_NR_GPIOS 的定義值，這樣å¯ä»¥æ›´å¥½åœ°åæ˜ è©²å¹³å° GPIO 的實際數é‡,節çœéœæ…‹è¡¨çš„空間。(這個定義值應該包å«ç‰‡ä¸Šç³»çµ±å…§å»º GPIO å’Œ @@ -485,7 +461,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB æ„味著 gpiolib æ ¸å¿ƒé»˜èªé—œé–‰,且用戶å¯ä»¥ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value - #define gpio_cansleep __gpio_cansleep 這些定義å¯ä»¥ç”¨æ›´ç†æƒ³çš„實ç¾æ–¹æ³•æ›¿ä»£ï¼Œé‚£å°±æ˜¯ä½¿ç”¨ç¶“éŽé‚輯優化的內è¯å‡½æ•¸ä¾†è¨ªå• 基於特定片上系統的 GPIO。例如,若引用的 GPIO (寄å˜å™¨ä½å移)是常é‡ã€Œ12ã€ï¼Œ diff --git a/Documentation/translations/zh_TW/index.rst b/Documentation/translations/zh_TW/index.rst index e97d7d578751..e7c83868e780 100644 --- a/Documentation/translations/zh_TW/index.rst +++ b/Documentation/translations/zh_TW/index.rst @@ -150,7 +150,7 @@ TODOList: .. toctree:: :maxdepth: 2 - arm64/index + arch/arm64/index TODOList: diff --git a/Documentation/translations/zh_TW/process/2.Process.rst b/Documentation/translations/zh_TW/process/2.Process.rst index b01cdd3a39ae..9d465df1f6c3 100644 --- a/Documentation/translations/zh_TW/process/2.Process.rst +++ b/Documentation/translations/zh_TW/process/2.Process.rst @@ -361,7 +361,7 @@ Andrew Morton çˆ²æœ‰æŠ±è² çš„å…§æ ¸é–‹ç™¼äººå“¡æä¾›äº†å¦‚ä¸‹å»ºè° æ©Ÿå™¨ä¸Šå§‹çµ‚å®Œç¾Žé‹è¡Œã€ã€‚通常的方法是和其他人一起解決å•é¡Œï¼ˆé€™å¯èƒ½éœ€ è¦å …æŒï¼ï¼‰ï¼Œä½†å°±æ˜¯å¦‚æ¤â€”â€”é€™æ˜¯å…§æ ¸é–‹ç™¼çš„ä¸€éƒ¨åˆ†ã€‚ -(http://lwn.net/articles/283982/) +(http://lwn.net/Articles/283982/) 在沒有明顯å•é¡Œéœ€è¦è§£æ±ºçš„情æ³ä¸‹ï¼Œé€šå¸¸å»ºè°é–‹ç™¼äººå“¡æŸ¥çœ‹ç•¶å‰çš„回æ¸å’Œé–‹æ”¾ç¼ºé™· 列表。從來都ä¸ç¼ºå°‘需è¦è§£æ±ºçš„å•é¡Œï¼›é€šéŽè§£æ±ºé€™äº›å•é¡Œï¼Œé–‹ç™¼äººå“¡å°‡å¾žè©²éŽç¨‹ç²å¾— diff --git a/Documentation/translations/zh_TW/process/3.Early-stage.rst b/Documentation/translations/zh_TW/process/3.Early-stage.rst index ab2a45fd65a4..076873ca0905 100644 --- a/Documentation/translations/zh_TW/process/3.Early-stage.rst +++ b/Documentation/translations/zh_TW/process/3.Early-stage.rst @@ -47,7 +47,7 @@ 試圖å‘這些人傳é”用戶需求是浪費時間。他們太「è°æ˜Žã€äº†ï¼Œæ ¹æœ¬è½ä¸åˆ°å°‘數 人的話。 -（http://lwn.net/articles/131776/） +（http://lwn.net/Articles/131776/） 實際情æ³å»æ˜¯ä¸åŒçš„ï¼›èˆ‡ç‰¹å®šæ¨¡å¡Šç›¸æ¯”ï¼Œå…§æ ¸é–‹ç™¼äººå“¡æ›´é—œå¿ƒç³»çµ±ç©©å®šæ€§ã€é•·æœŸç¶è· 以åŠæ‰¾åˆ°å•é¡Œçš„æ£ç¢ºè§£æ±ºæ–¹æ¡ˆã€‚這個故事的寓æ„是把é‡é»žæ”¾åœ¨å•é¡Œä¸Šâ€”—而ä¸æ˜¯å…·é«”çš„ diff --git a/Documentation/translations/zh_TW/process/4.Coding.rst b/Documentation/translations/zh_TW/process/4.Coding.rst index ccc3946227a0..7fc0344ed16b 100644 --- a/Documentation/translations/zh_TW/process/4.Coding.rst +++ b/Documentation/translations/zh_TW/process/4.Coding.rst @@ -152,7 +152,7 @@ Linuså°é€™å€‹å•é¡Œçµ¦å‡ºäº†æœ€ä½³ç”案: 所以我們ä¸æœƒé€šéŽå¼•å…¥æ–°å•é¡Œä¾†ä¿®å¾©éŒ¯èª¤ã€‚這種方å¼æ˜¯é ä¸ä½çš„ï¼Œæ²’äººçŸ¥é“ æ˜¯å¦çœŸçš„有進展。是å‰é€²å…©æ¥ã€å¾Œé€€ä¸€æ¥ï¼Œé‚„是å‰é€²ä¸€æ¥ã€å¾Œé€€å…©æ¥ï¼Ÿ -（http://lwn.net/articles/243460/） +（http://lwn.net/Articles/243460/） 特別ä¸å—æ¡è¿Žçš„一種回æ¸é¡žåž‹æ˜¯ç”¨æˆ¶ç©ºé–“ABI的任何變化。一旦接å£è¢«å°Žå‡ºåˆ°ç”¨æˆ¶ç©ºé–“， å°±å¿…é ˆç„¡é™æœŸåœ°æ”¯æŒå®ƒã€‚這一事實使得用戶空間接å£çš„å‰µå»ºç‰¹åˆ¥å…·æœ‰æŒ‘æˆ°æ€§ï¼šå› çˆ²å®ƒå€‘ diff --git a/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst b/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst index 3de093d0f170..4fbc104a37ca 100644 --- a/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst +++ b/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst @@ -101,7 +101,7 @@ Gitæ供了一些強大的工具，å¯ä»¥è®“您é‡å¯«é–‹ç™¼æ·å²ã€‚一個ä¸æ– ä½ å¯ä»¥çµ¦æˆ‘發補ä¸ï¼Œä½†ç•¶æˆ‘å¾žä½ é‚£è£¡æ‹‰å–一個Git補ä¸æ™‚，我需è¦çŸ¥é“ä½ æ¸…æ¥š 自己在åšä»€éº¼ï¼Œæˆ‘需è¦èƒ½å¤ 相信事情而 *無需* 手動檢查æ¯å€‹å–®ç¨çš„更改。 -（http://lwn.net/articles/224135/）。 +（http://lwn.net/Articles/224135/）。 爲了é¿å…這種情æ³ï¼Œè«‹ç¢ºä¿çµ¦å®šåˆ†æ”¯ä¸çš„所有補ä¸éƒ½èˆ‡ç›¸é—œä¸»é¡Œç·Šå¯†ç›¸é—œï¼›ã€Œé©…å‹•ç¨‹åº ä¿®å¾©ã€åˆ†æ”¯ä¸æ‡‰æ›´æ”¹æ ¸å¿ƒå…§å˜ç®¡ç†ä»£ç¢¼ã€‚而且，最é‡è¦çš„是，ä¸è¦ä½¿ç”¨Gitæ¨¹ä¾†ç¹žéŽ diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 176e8fc3f31b..4ea5b837399a 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -180,6 +180,7 @@ Code Seq# Include File Comments 'P' 00-0F drivers/usb/class/usblp.c conflict! 'P' 01-09 drivers/misc/pci_endpoint_test.c conflict! 'P' 00-0F xen/privcmd.h conflict! +'P' 00-05 linux/tps6594_pfsm.h conflict! 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! @@ -363,7 +364,7 @@ Code Seq# Include File Comments 0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver 0xCD 01 linux/reiserfs_fs.h 0xCE 01-02 uapi/linux/cxl_mem.h Compute Express Link Memory Devices -0xCF 02 fs/cifs/ioctl.c +0xCF 02 fs/smb/client/cifs_ioctl.h 0xDB 00-0F drivers/char/mwave/mwavepub.h 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ <mailto:aherrman@de.ibm.com> diff --git a/Documentation/userspace-api/media/frontend.h.rst.exceptions b/Documentation/userspace-api/media/frontend.h.rst.exceptions index 8b73fee11a79..dcaf5740de7e 100644 --- a/Documentation/userspace-api/media/frontend.h.rst.exceptions +++ b/Documentation/userspace-api/media/frontend.h.rst.exceptions @@ -142,6 +142,10 @@ ignore symbol FEC_26_45 ignore symbol FEC_28_45 ignore symbol FEC_32_45 ignore symbol FEC_77_90 +ignore symbol FEC_11_45 +ignore symbol FEC_4_15 +ignore symbol FEC_14_45 +ignore symbol FEC_7_15 ignore symbol TRANSMISSION_MODE_AUTO ignore symbol TRANSMISSION_MODE_1K diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst index 9cd18c153d19..72aef1759b60 100644 --- a/Documentation/userspace-api/media/v4l/biblio.rst +++ b/Documentation/userspace-api/media/v4l/biblio.rst @@ -427,3 +427,12 @@ VP9 :title: VP9 Bitstream & Decoding Process Specification :author: Adrian Grange (Google), Peter de Rivaz (Argon Design), Jonathan Hunt (Argon Design) + +.. _av1: + +AV1 +=== + +:title: AV1 Bitstream & Decoding Process Specification + +:author: Peter de Rivaz, Argon Design Ltd, Jack Haughton, Argon Design Ltd diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst index daa4f40869f8..cdc515c60468 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst @@ -506,6 +506,8 @@ enum v4l2_scene_mode - value down. A value of zero stops the motion if one is in progress and has no effect otherwise. +.. _v4l2-camera-sensor-orientation: + ``V4L2_CID_CAMERA_ORIENTATION (menu)`` This read-only control describes the camera orientation by reporting its mounting position on the device where the camera is installed. The control @@ -536,6 +538,7 @@ enum v4l2_scene_mode - - The camera is not directly attached to the device and is freely movable. +.. _v4l2-camera-sensor-rotation: ``V4L2_CID_CAMERA_SENSOR_ROTATION (integer)`` This read-only control describes the rotation correction in degrees in the diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index 3d8411acd5b8..81e60f4002c8 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -1890,11 +1890,11 @@ params syntax' of the :ref:`vp9` specification for more details. * - __u8 - ``tree_probs[7]`` - Specifies the probability values to be used when decoding a Segment-ID. - See '5.15. Segmentation map' section of :ref:`vp9` for more details. + See '5.15 Segmentation map' section of :ref:`vp9` for more details. * - __u8 - ``pred_probs[3]`` - Specifies the probability values to be used when decoding a - Predicted-Segment-ID. See '6.4.14. Get segment id syntax' + Predicted-Segment-ID. See '6.4.14 Get segment id syntax' section of :ref:`vp9` for more details. * - __u8 - ``flags`` @@ -2923,6 +2923,13 @@ This structure contains all loop filter related parameters. See sections - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - PocLtCurr as described in section 8.3.2 "Decoding process for reference picture set": provides the index of the long term references in DPB array. + * - __u8 + - ``num_delta_pocs_of_ref_rps_idx`` + - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0, + it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse + the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size. + When the value of short_term_ref_pic_set_sps_flag in the slice header is + equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0. * - struct :c:type:`v4l2_hevc_dpb_entry` - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - The decoded picture buffer, for meta-data about reference frames. @@ -2950,3 +2957,1208 @@ This structure contains all loop filter related parameters. See sections * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR`` - 0x00000004 - + +.. _v4l2-codec-stateless-av1: + +``V4L2_CID_STATELESS_AV1_SEQUENCE (struct)`` + Represents an AV1 Sequence OBU (Open Bitstream Unit). See section 5.5 + "Sequence header OBU syntax" in :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_sequence + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_sequence + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``flags`` + - See :ref:`AV1 Sequence Flags <av1_sequence_flags>`. + * - __u8 + - ``seq_profile`` + - Specifies the features that can be used in the coded video sequence. + * - __u8 + - ``order_hint_bits`` + - Specifies the number of bits used for the order_hint field at each frame. + * - __u8 + - ``bit_depth`` + - the bit depth to use for the sequence as described in section 5.5.2 + "Color config syntax" in :ref:`av1` for more details. + * - __u8 + - ``reserved`` + - Applications and drivers must set this to zero. + * - __u16 + - ``max_frame_width_minus_1`` + - specifies the maximum frame width minus 1 for the frames represented by + this sequence header. + +.. _av1_sequence_flags: + +``AV1 Sequence Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE`` + - 0x00000001 + - If set, specifies that the coded video sequence contains only one coded + frame. If not set, specifies that the coded video sequence contains one + or more coded frames. + * - ``V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK`` + - 0x00000002 + - If set, indicates that superblocks contain 128x128 luma samples. + When equal to 0, it indicates that superblocks contain 64x64 luma + samples. The number of contained chroma samples depends on + subsampling_x and subsampling_y. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA`` + - 0x00000004 + - If set, specifies that the use_filter_intra syntax element may be + present. If not set, specifies that the use_filter_intra syntax element + will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER`` + - 0x00000008 + - Specifies whether the intra edge filtering process should be enabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND`` + - 0x00000010 + - If set, specifies that the mode info for inter blocks may contain the + syntax element interintra. If not set, specifies that the syntax element + interintra will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND`` + - 0x00000020 + - If set, specifies that the mode info for inter blocks may contain the + syntax element compound_type. If not set, specifies that the syntax + element compound_type will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION`` + - 0x00000040 + - If set, indicates that the allow_warped_motion syntax element may be + present. If not set, indicates that the allow_warped_motion syntax + element will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER`` + - 0x00000080 + - If set, indicates that the inter prediction filter type may be specified + independently in the horizontal and vertical directions. If the flag is + equal to 0, only one filter type may be specified, which is then used in + both directions. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT`` + - 0x00000100 + - If set, indicates that tools based on the values of order hints may be + used. If not set, indicates that tools based on order hints are + disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP`` + - 0x00000200 + - If set, indicates that the distance weights process may be used for + inter prediction. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS`` + - 0x00000400 + - If set, indicates that the use_ref_frame_mvs syntax element may be + present. If not set, indicates that the use_ref_frame_mvs syntax element + will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES`` + - 0x00000800 + - If set, specifies that the use_superres syntax element will be present + in the uncompressed header. If not set, specifies that the use_superres + syntax element will not be present (instead use_superres will be set to + 0 in the uncompressed header without being read). + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF`` + - 0x00001000 + - If set, specifies that cdef filtering may be enabled. If not set, + specifies that cdef filtering is disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION`` + - 0x00002000 + - If set, specifies that loop restoration filtering may be enabled. If not + set, specifies that loop restoration filtering is disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME`` + - 0x00004000 + - If set, indicates that the video does not contain U and V color planes. + If not set, indicates that the video contains Y, U, and V color planes. + * - ``V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE`` + - 0x00008000 + - If set, signals full swing representation, i.e. "Full Range + Quantization". If not set, signals studio swing representation, i.e. + "Limited Range Quantization". + * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X`` + - 0x00010000 + - Specify the chroma subsampling format. + * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y`` + - 0x00020000 + - Specify the chroma subsampling format. + * - ``V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT`` + - 0x00040000 + - Specifies whether film grain parameters are present in the coded video + sequence. + * - ``V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q`` + - 0x00080000 + - If set, indicates that the U and V planes may have separate delta + quantizer values. If not set, indicates that the U and V planes will share + the same delta quantizer value. + +``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (struct)`` + Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart, + MiRowEnd, MiColStart and MiColEnd can be retrieved from struct + v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and + tile_col. See section 6.10.1 "General tile group OBU semantics" in + :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_tile_group_entry + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_tile_group_entry + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``tile_offset`` + - Offset from the OBU data, i.e. where the coded tile data actually starts. + * - __u32 + - ``tile_size`` + - Specifies the size in bytes of the coded tile. Equivalent to "TileSize" + in :ref:`av1`. + * - __u32 + - ``tile_row`` + - Specifies the row of the current tile. Equivalent to "TileRow" in + :ref:`av1`. + * - __u32 + - ``tile_col`` + - Specifies the column of the current tile. Equivalent to "TileColumn" in + :ref:`av1`. + +.. c:type:: v4l2_av1_warp_model + + AV1 Warp Model as described in section 3 "Symbols and abbreviated terms" of + :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_WARP_MODEL_IDENTITY`` + - 0 + - Warp model is just an identity transform. + * - ``V4L2_AV1_WARP_MODEL_TRANSLATION`` + - 1 + - Warp model is a pure translation. + * - ``V4L2_AV1_WARP_MODEL_ROTZOOM`` + - 2 + - Warp model is a rotation + symmetric zoom + translation. + * - ``V4L2_AV1_WARP_MODEL_AFFINE`` + - 3 + - Warp model is a general affine transform. + +.. c:type:: v4l2_av1_reference_frame + +AV1 Reference Frames as described in section 6.10.24 "Ref frames semantics" +of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_REF_INTRA_FRAME`` + - 0 + - Intra Frame Reference. + * - ``V4L2_AV1_REF_LAST_FRAME`` + - 1 + - Last Frame Reference. + * - ``V4L2_AV1_REF_LAST2_FRAME`` + - 2 + - Last2 Frame Reference. + * - ``V4L2_AV1_REF_LAST3_FRAME`` + - 3 + - Last3 Frame Reference. + * - ``V4L2_AV1_REF_GOLDEN_FRAME`` + - 4 + - Golden Frame Reference. + * - ``V4L2_AV1_REF_BWDREF_FRAME`` + - 5 + - BWD Frame Reference. + * - ``V4L2_AV1_REF_ALTREF2_FRAME`` + - 6 + - ALTREF2 Frame Reference. + * - ``V4L2_AV1_REF_ALTREF_FRAME`` + - 7 + - ALTREF Frame Reference. + +.. c:type:: v4l2_av1_global_motion + +AV1 Global Motion parameters as described in section 6.8.17 +"Global motion params semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_global_motion + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - A bitfield containing the flags per reference frame. See + :ref:`AV1 Global Motion Flags <av1_global_motion_flags>` for more + details. + * - enum :c:type:`v4l2_av1_warp_model` + - ``type[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - The type of global motion transform used. + * - __s32 + - ``params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]`` + - This field has the same meaning as "gm_params" in :ref:`av1`. + * - __u8 + - ``invalid`` + - Bitfield indicating whether the global motion params are invalid for a + given reference frame. See section 7.11.3.6 Setup shear process and the + variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to + create a suitable mask. + * - __u8 + - ``reserved[3]`` + - Applications and drivers must set this to zero. + +.. _av1_global_motion_flags: + +``AV1 Global Motion Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL`` + - 0x00000001 + - Specifies whether global motion parameters are present for a particular + reference frame. + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM`` + - 0x00000002 + - Specifies whether a particular reference frame uses rotation and zoom + global motion. + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION`` + - 0x00000004 + - Specifies whether a particular reference frame uses translation global + motion + +.. c:type:: v4l2_av1_frame_restoration_type + +AV1 Frame Restoration Type. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FRAME_RESTORE_NONE`` + - 0 + - No filtering is applied. + * - ``V4L2_AV1_FRAME_RESTORE_WIENER`` + - 1 + - Wiener filter process is invoked. + * - ``V4L2_AV1_FRAME_RESTORE_SGRPROJ`` + - 2 + - Self guided filter process is invoked. + * - ``V4L2_AV1_FRAME_RESTORE_SWITCHABLE`` + - 3 + - Restoration filter is swichtable. + +.. c:type:: v4l2_av1_loop_restoration + +AV1 Loop Restauration as described in section 6.10.15 "Loop restoration params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_loop_restoration + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Loop Restoration Flags <av1_loop_restoration_flags>`. + * - __u8 + - ``lr_unit_shift`` + - Specifies if the luma restoration size should be halved. + * - __u8 + - ``lr_uv_shift`` + - Specifies if the chroma size should be half the luma size. + * - __u8 + - ``reserved`` + - Applications and drivers must set this to zero. + * - :c:type:`v4l2_av1_frame_restoration_type` + - ``frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX]`` + - Specifies the type of restoration used for each plane. + * - __u8 + - ``loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES]`` + - Specifies the size of loop restoration units in units of samples in the + current plane. + +.. _av1_loop_restoration_flags: + +``AV1 Loop Restoration Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR`` + - 0x00000001 + - Retains the same meaning as UsesLr in :ref:`av1`. + * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR`` + - 0x00000002 + - Retains the same meaning as UsesChromaLr in :ref:`av1`. + +.. c:type:: v4l2_av1_cdef + +AV1 CDEF params semantics as described in section 6.10.14 "CDEF params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_cdef + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``damping_minus_3`` + - Controls the amount of damping in the deringing filter. + * - __u8 + - ``bits`` + - Specifies the number of bits needed to specify which CDEF filter to + apply. + * - __u8 + - ``y_pri_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the primary filter. + * - __u8 + - ``y_sec_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the secondary filter. + * - __u8 + - ``uv_pri_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the primary filter. + * - __u8 + - ``uv_secondary_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the secondary filter. + +.. c:type:: v4l2_av1_segment_feature + +AV1 segment features as described in section 3 "Symbols and abbreviated terms" +of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEG_LVL_ALT_Q`` + - 0 + - Index for quantizer segment feature. + * - ``V4L2_AV1_SEG_LVL_ALT_LF_Y_V`` + - 1 + - Index for vertical luma loop filter segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_FRAME`` + - 5 + - Index for reference frame segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_SKIP`` + - 6 + - Index for skip segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_GLOBALMV`` + - 7 + - Index for global mv feature. + * - ``V4L2_AV1_SEG_LVL_MAX`` + - 8 + - Number of segment features. + +.. c:type:: v4l2_av1_segmentation + +AV1 Segmentation params as defined in section 6.8.13 "Segmentation params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_segmentation + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Segmentation Flags <av1_segmentation_flags>` + * - __u8 + - ``last_active_seg_id`` + - Indicates the highest numbered segment id that has some + enabled feature. This is used when decoding the segment id to only decode + choices corresponding to used segments. + * - __u8 + - ``feature_enabled[V4L2_AV1_MAX_SEGMENTS]`` + - Bitmask defining which features are enabled in each segment. Use + V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask. + * - __u16 + - `feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX]`` + - Data attached to each feature. Data entry is only valid if the feature + is enabled. + +.. _av1_segmentation_flags: + +``AV1 Segmentation Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEGMENTATION_FLAG_ENABLED`` + - 0x00000001 + - If set, indicates that this frame makes use of the segmentation tool. If + not set, indicates that the frame does not use segmentation. + * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP`` + - 0x00000002 + - If set, indicates that the segmentation map are updated during the + decoding of this frame. If not set, indicates that the segmentation map + from the previous frame is used. + * - ``V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE`` + - 0x00000004 + - If set, indicates that the updates to the segmentation map are coded + relative to the existing segmentation map. If not set, indicates that + the new segmentation map is coded without reference to the existing + segmentation map. + * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA`` + - 0x00000008 + - If set, indicates that the updates to the segmentation map are coded + relative to the existing segmentation map. If not set, indicates that + the new segmentation map is coded without reference to the existing + segmentation map. + * - ``V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP`` + - 0x00000010 + - If set, indicates that the segment id will be read before the skip + syntax element. If not set, indicates that the skip syntax element will + be read first. + +.. c:type:: v4l2_av1_loop_filter + +AV1 Loop filter params as defined in section 6.8.10 "Loop filter semantics" of +:ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_global_motion + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Loop Filter flags <av1_loop_filter_flags>` for more details. + * - __u8 + - ``level[4]`` + - An array containing loop filter strength values. Different loop + filter strength values from the array are used depending on the image + plane being filtered, and the edge direction (vertical or horizontal) + being filtered. + * - __u8 + - ``sharpness`` + - indicates the sharpness level. The loop_filter_level and + loop_filter_sharpness together determine when a block edge is filtered, + and by how much the filtering can change the sample values. The loop + filter process is described in section 7.14 of :ref:`av1`. + * - __u8 + - ``ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - contains the adjustment needed for the filter level based on the + chosen reference frame. If this syntax element is not present, it + maintains its previous value. + * - __u8 + - ``mode_deltas[2]`` + - contains the adjustment needed for the filter level based on + the chosen mode. If this syntax element is not present, it maintains its + previous value. + * - __u8 + - ``delta_lf_res`` + - specifies the left shift which should be applied to decoded loop filter + delta values. + +.. _av1_loop_filter_flags: + +``AV1 Loop Filter Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED`` + - 0x00000001 + - If set, means that the filter level depends on the mode and reference + frame used to predict a block. If not set, means that the filter level + does not depend on the mode and reference frame. + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE`` + - 0x00000002 + - If set, means that additional syntax elements are present that specify + which mode and reference frame deltas are to be updated. If not set, + means that these syntax elements are not present. + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT`` + - 0x00000004 + - Specifies whether loop filter delta values are present + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI`` + - 0x00000008 + - A value equal to 1 specifies that separate loop filter + deltas are sent for horizontal luma edges, vertical luma edges, + the U edges, and the V edges. A value of delta_lf_multi equal to 0 + specifies that the same loop filter delta is used for all edges. + +.. c:type:: v4l2_av1_quantization + +AV1 Quantization params as defined in section 6.8.11 "Quantization params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_quantization + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Loop Filter flags <av1_quantization_flags>` for more details. + * - __u8 + - ``base_q_idx`` + - Indicates the base frame qindex. This is used for Y AC coefficients and + as the base value for the other quantizers. + * - __u8 + - ``delta_q_y_dc`` + - Indicates the Y DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_u_dc`` + - Indicates the U DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_u_ac`` + - Indicates the U AC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_v_dc`` + - Indicates the V DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_v_ac`` + - Indicates the V AC quantizer relative to base_q_idx. + * - __u8 + - ``qm_y`` + - Specifies the level in the quantizer matrix that should be used for + luma plane decoding. + * - __u8 + - ``qm_u`` + - Specifies the level in the quantizer matrix that should be used for + chroma U plane decoding. + * - __u8 + - ``qm_v`` + - Specifies the level in the quantizer matrix that should be used for + chroma V plane decoding. + * - __u8 + - ``delta_q_res`` + - Specifies the left shift which should be applied to decoded quantizer + index delta values. + +.. _av1_quantization_flags: + +``AV1 Quantization Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA`` + - 0x00000001 + - If set, indicates that the U and V delta quantizer values are coded + separately. If not set, indicates that the U and V delta quantizer + values share a common value. + * - ``V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX`` + - 0x00000002 + - If set, specifies that the quantizer matrix will be used to compute + quantizers. + * - ``V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT`` + - 0x00000004 + - Specifies whether quantizer index delta values are present. + +.. c:type:: v4l2_av1_tile_info + +AV1 Tile info as defined in section 6.8.14 "Tile info semantics" of ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_tile_info + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Tile Info flags <av1_tile_info_flags>` for more details. + * - __u8 + - ``context_update_tile_id`` + - Specifies which tile to use for the CDF update. + * - __u8 + - ``tile_cols`` + - Specifies the number of tiles across the frame. + * - __u8 + - ``tile_rows`` + - Specifies the number of tiles down the frame. + * - __u32 + - ``mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1]`` + - An array specifying the start column (in units of 4x4 luma + samples) for each tile across the image. + * - __u32 + - ``mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1]`` + - An array specifying the start row (in units of 4x4 luma + samples) for each tile across the image. + * - __u32 + - ``width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS]`` + - Specifies the width of a tile minus 1 in units of superblocks. + * - __u32 + - ``height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS]`` + - Specifies the height of a tile minus 1 in units of superblocks. + * - __u8 + - ``tile_size_bytes`` + - Specifies the number of bytes needed to code each tile size. + * - __u8 + - ``reserved[3]`` + - Applications and drivers must set this to zero. + +.. _av1_tile_info_flags: + +``AV1 Tile Info Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING`` + - 0x00000001 + - If set, means that the tiles are uniformly spaced across the frame. (In + other words, all tiles are the same size except for the ones at the + right and bottom edge which can be smaller). If not set means that the + tile sizes are coded. + +.. c:type:: v4l2_av1_frame_type + +AV1 Frame Type + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_KEY_FRAME`` + - 0 + - Key frame. + * - ``V4L2_AV1_INTER_FRAME`` + - 1 + - Inter frame. + * - ``V4L2_AV1_INTRA_ONLY_FRAME`` + - 2 + - Intra-only frame. + * - ``V4L2_AV1_SWITCH_FRAME`` + - 3 + - Switch frame. + +.. c:type:: v4l2_av1_interpolation_filter + +AV1 Interpolation Filter + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP`` + - 0 + - Eight tap filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH`` + - 1 + - Eight tap smooth filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP`` + - 2 + - Eight tap sharp filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_BILINEAR`` + - 3 + - Bilinear filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE`` + - 4 + - Filter selection is signaled at the block level. + +.. c:type:: v4l2_av1_tx_mode + +AV1 Tx mode as described in section 6.8.21 "TX mode semantics" of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_TX_MODE_ONLY_4X4`` + - 0 + - The inverse transform will use only 4x4 transforms. + * - ``V4L2_AV1_TX_MODE_LARGEST`` + - 1 + - The inverse transform will use the largest transform size that fits + inside the block. + * - ``V4L2_AV1_TX_MODE_SELECT`` + - 2 + - The choice of transform size is specified explicitly for each block. + +``V4L2_CID_STATELESS_AV1_FRAME (struct)`` + Represents a Frame Header OBU. See 6.8 "Frame Header OBU semantics" of + :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_frame + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_frame + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - struct :c:type:`v4l2_av1_tile_info` + - ``tile_info`` + - Tile info + * - struct :c:type:`v4l2_av1_quantization` + - ``quantization`` + - Quantization parameters. + * - struct :c:type:`v4l2_av1_segmentation` + - ``segmentation`` + - Segmentation parameters. + * - __u8 + - ``superres_denom`` + - The denominator for the upscaling ratio. + * - struct :c:type:`v4l2_av1_loop_filter` + - ``loop_filter`` + - Loop filter params + * - struct :c:type:`v4l2_av1_cdef` + - ``cdef`` + - CDEF params + * - __u8 + - ``skip_mode_frame[2]`` + - Specifies the frames to use for compound prediction when skip_mode is + equal to 1. + * - __u8 + - ``primary_ref_frame`` + - Specifies which reference frame contains the CDF values and other state + that should be loaded at the start of the frame. + * - struct :c:type:`v4l2_av1_loop_restoration` + - ``loop_restoration`` + - Loop restoration parameters. + * - struct :c:type:`v4l2_av1_loop_global_motion` + - ``global_motion`` + - Global motion parameters. + * - __u32 + - ``flags`` + - See + :ref:`AV1 Frame flags <av1_frame_flags>` for more details. + * - enum :c:type:`v4l2_av1_frame_type` + - ``frame_type`` + - Specifies the AV1 frame type + * - __u32 + - ``order_hint`` + - Specifies OrderHintBits least significant bits of the expected output + order for this frame. + * - __u32 + - ``upscaled_width`` + - The upscaled width. + * - enum :c:type:`v4l2_av1_interpolation_filter` + - ``interpolation_filter`` + - Specifies the filter selection used for performing inter prediction. + * - enum :c:type:`v4l2_av1_tx_mode` + - ``tx_mode`` + - Specifies how the transform size is determined. + * - __u32 + - ``frame_width_minus_1`` + - Add 1 to get the frame's width. + * - __u32 + - ``frame_height_minus_1`` + - Add 1 to get the frame's height. + * - __u16 + - ``render_width_minus_1`` + - Add 1 to get the render width of the frame in luma samples. + * - __u16 + - ``render_height_minus_1`` + - Add 1 to get the render height of the frame in luma samples. + * - __u32 + - ``current_frame_id`` + - Specifies the frame id number for the current frame. Frame + id numbers are additional information that do not affect the decoding + process, but provide decoders with a way of detecting missing reference + frames so that appropriate action can be taken. + * - __u8 + - ``buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS]`` + - Specifies the frame removal time in units of DecCT clock ticks counted + from the removal time of the last random access point for operating point + opNum. + * - __u8 + - ``reserved[4]`` + - Applications and drivers must set this to zero. + * - __u32 + - ``order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - Specifies the expected output order hint for each reference frame. + This field corresponds to the OrderHints variable from the specification + (section 5.9.2 "Uncompressed header syntax"). As such, this is only + used for non-intra frames and ignored otherwise. order_hints[0] is + always ignored. + * - __u64 + - ``reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - The V4L2 timestamp for each of the reference frames enumerated in + enum :c:type:`v4l2_av1_reference_frame` starting at + ``V4L2_AV1_REF_LAST_FRAME``. This represents the state of reference + slot as described in the spec and updated by userland through the + "Reference frame update process" in section 7.20 The timestamp refers + to the ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the + :c:func:`v4l2_timeval_to_ns()` function to convert the struct + :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __s8 + - ``ref_frame_idx[V4L2_AV1_REFS_PER_FRAME]`` + - An index into ``reference_frame_ts`` representing the ordered list of + references used by inter-frame. Matches the bitstream syntax + element of the same name. + * - __u8 + - ``refresh_frame_flags`` + - Contains a bitmask that specifies which reference frame slots will be + updated with the current frame after it is decoded. + +.. _av1_frame_flags: + +``AV1 Frame Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FRAME_FLAG_SHOW_FRAME`` + - 0x00000001 + - If set, specifies that this frame should be immediately output once + decoded. If not set, specifies that this frame should not be immediately + output; it may be output later if a later uncompressed header uses + show_existing_frame equal to 1. + * - ``V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME`` + - 0x00000002 + - If set, specifies that the frame may be output using the + show_existing_frame mechanism. If not set, specifies that this frame + will not be output using the show_existing_frame mechanism. + * - ``V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE`` + - 0x00000004 + - Specifies whether error resilient mode is enabled. + * - ``V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE`` + - 0x00000008 + - Specifies whether the CDF update in the symbol decoding process should + be disabled. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS`` + - 0x00000010 + - If set, indicates that intra blocks may use palette encoding. If not + set, indicates that palette encoding is never used. + * - ``V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV`` + - 0x00000020 + - If set, specifies that motion vectors will always be integers. If not + set, specifies that motion vectors can contain fractional bits. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC`` + - 0x00000040 + - If set, indicates that intra block copy may be used in this frame. If + not set, indicates that intra block copy is not allowed in this frame. + * - ``V4L2_AV1_FRAME_FLAG_USE_SUPERRES`` + - 0x00000080 + - If set, indicates that upscaling is needed. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV`` + - 0x00000100 + - If set, specifies that motion vectors are specified to eighth pel + precision. If not set, specifies that motion vectors are specified to + quarter pel precision; + * - ``V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE`` + - 0x00000200 + - If not set, specifies that only the SIMPLE motion mode will be used. + * - ``V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS`` + - 0x00000400 + - If set specifies that motion vector information from a previous frame + can be used when decoding the current frame. If not set, specifies that + this information will not be used. + * - ``V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF`` + - 0x00000800 + - If set indicates that the end of frame CDF update is disabled. If not + set, indicates that the end of frame CDF update is enabled + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION`` + - 0x00001000 + - If set, indicates that the syntax element motion_mode may be present, if + not set, indicates that the syntax element motion_mode will not be + present. + * - ``V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT`` + - 0x00002000 + - If set, specifies that the mode info for inter blocks contains the + syntax element comp_mode that indicates whether to use single or + compound reference prediction. If not set, specifies that all inter + blocks will use single prediction. + * - ``V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET`` + - 0x00004000 + - If set, specifies that the frame is restricted to a reduced subset of + the full set of transform types. + * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED`` + - 0x00008000 + - This flag retains the same meaning as SkipModeAllowed in :ref:`av1`. + * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT`` + - 0x00010000 + - If set, specifies that the syntax element skip_mode will be present, if + not set, specifies that skip_mode will not be used for this frame. + * - ``V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE`` + - 0x00020000 + - If set, specifies that the frame size will either be specified as the + size of one of the reference frames, or computed from the + frame_width_minus_1 and frame_height_minus_1 syntax elements. If not + set, specifies that the frame size is equal to the size in the sequence + header. + * - ``V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT`` + - 0x00040000 + - If set, specifies that buffer_removal_time is present. If not set, + specifies that buffer_removal_time is not present. + * - ``V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING`` + - 0x00080000 + - If set, indicates that only two reference frames are explicitly + signaled. If not set, indicates that all reference frames are explicitly + signaled. + +``V4L2_CID_STATELESS_AV1_FILM_GRAIN (struct)`` + Represents the optional film grain parameters. See section + 6.8.20 "Film grain params semantics" of :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_film_grain + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_ctrl_av1_film_grain + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Film Grain Flags <av1_film_grain_flags>`. + * - __u8 + - ``cr_mult`` + - Represents a multiplier for the cr component used in derivation of the + input index to the cr component scaling function. + * - __u16 + - ``grain_seed`` + - Specifies the starting value for the pseudo-random numbers used during + film grain synthesis. + * - __u8 + - ``film_grain_params_ref_idx`` + - Indicates which reference frame contains the film grain parameters to be + used for this frame. + * - __u8 + - ``num_y_points`` + - Specifies the number of points for the piece-wise linear scaling + function of the luma component. + * - __u8 + - ``point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS]`` + - Represents the x (luma value) coordinate for the i-th point + of the piecewise linear scaling function for luma component. The values + are signaled on the scale of 0..255. In case of 10 bit video, these + values correspond to luma values divided by 4. In case of 12 bit video, + these values correspond to luma values divided by 16. + * - __u8 + - ``point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS]`` + - Represents the scaling (output) value for the i-th point + of the piecewise linear scaling function for luma component. + * - __u8 + - ``num_cb_points`` + - Specifies the number of points for the piece-wise linear scaling + function of the cb component. + * - __u8 + - ``point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS]`` + - Represents the x coordinate for the i-th point of the + piece-wise linear scaling function for cb component. The values are + signaled on the scale of 0..255. + * - __u8 + - ``point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS]`` + - Represents the scaling (output) value for the i-th point of the + piecewise linear scaling function for cb component. + * - __u8 + - ``num_cr_points`` + - Represents the number of points for the piece-wise + linear scaling function of the cr component. + * - __u8 + - ``point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS]`` + - Represents the x coordinate for the i-th point of the + piece-wise linear scaling function for cr component. The values are + signaled on the scale of 0..255. + * - __u8 + - ``point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS]`` + - Represents the scaling (output) value for the i-th point of the + piecewise linear scaling function for cr component. + * - __u8 + - ``grain_scaling_minus_8`` + - Represents the shift - 8 applied to the values of the chroma component. + The grain_scaling_minus_8 can take values of 0..3 and determines the + range and quantization step of the standard deviation of film grain. + * - __u8 + - ``ar_coeff_lag`` + - Specifies the number of auto-regressive coefficients for luma and + chroma. + * - __u8 + - ``ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the Y plane. + * - __u8 + - ``ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the U plane. + * - __u8 + - ``ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the V plane. + * - __u8 + - ``ar_coeff_shift_minus_6`` + - Specifies the range of the auto-regressive coefficients. Values of 0, + 1, 2, and 3 correspond to the ranges for auto-regressive coefficients of + [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25, 0.25) respectively. + * - __u8 + - ``grain_scale_shift`` + - Specifies how much the Gaussian random numbers should be scaled down + during the grain synthesis process. + * - __u8 + - ``cb_mult`` + - Represents a multiplier for the cb component used in derivation of the + input index to the cb component scaling function. + * - __u8 + - ``cb_luma_mult`` + - Represents a multiplier for the average luma component used in + derivation of the input index to the cb component scaling function.. + * - __u8 + - ``cr_luma_mult`` + - Represents a multiplier for the average luma component used in + derivation of the input index to the cr component scaling function. + * - __u16 + - ``cb_offset`` + - Represents an offset used in derivation of the input index to the + cb component scaling function. + * - __u16 + - ``cr_offset`` + - Represents an offset used in derivation of the input index to the + cr component scaling function. + * - __u8 + - ``reserved[4]`` + - Applications and drivers must set this to zero. + +.. _av1_film_grain_flags: + +``AV1 Film Grain Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN`` + - 0x00000001 + - If set, specifies that film grain should be added to this frame. If not + set, specifies that film grain should not be added. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN`` + - 0x00000002 + - If set, means that a new set of parameters should be sent. If not set, + specifies that the previous set of parameters should be used. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA`` + - 0x00000004 + - If set, specifies that the chroma scaling is inferred from the luma + scaling. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP`` + - 0x00000008 + - If set, indicates that the overlap between film grain blocks shall be + applied. If not set, indicates that the overlap between film grain blocks + shall not be applied. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE`` + - 0x00000010 + - If set, indicates that clipping to the restricted (studio, i.e. limited) + range shall be applied to the sample values after adding the film grain + (see the semantics for color_range for an explanation of studio swing). + If not set, indicates that clipping to the full range shall be applied + to the sample values after adding the film grain. diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index fff25357fe86..0bb61fc5bc00 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -12,10 +12,10 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 - pixfmt-meta-d4xx - pixfmt-meta-intel-ipu3 - pixfmt-meta-rkisp1 - pixfmt-meta-uvc - pixfmt-meta-vsp1-hgo - pixfmt-meta-vsp1-hgt - pixfmt-meta-vivid + metafmt-d4xx + metafmt-intel-ipu3 + metafmt-rkisp1 + metafmt-uvc + metafmt-vsp1-hgo + metafmt-vsp1-hgt + metafmt-vivid diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst index 4e437ba97a0e..541836074f94 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst @@ -12,7 +12,7 @@ Intel D4xx UVC Cameras Metadata Description =========== -Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC +Intel D4xx (D435, D455 and others) cameras include per-frame metadata in their UVC payload headers, following the Microsoft(R) UVC extension proposal [1_]. That means, that the private D4XX metadata, following the standard UVC header, is organised in blocks. D4XX cameras implement several standard block types, @@ -26,6 +26,8 @@ V4L2_META_FMT_UVC with the only difference, that it also includes proprietary payload header data. D4xx cameras use bulk transfers and only send one payload per frame, therefore their headers cannot be larger than 255 bytes. +This document implements Intel Configuration version 3 [9_]. + Below are proprietary Microsoft style metadata types, used by D4xx cameras, where all fields are in little endian order: @@ -43,10 +45,10 @@ where all fields are in little endian order: * - __u32 ID - 0x80000000 * - __u32 Size - - Size in bytes (currently 56) + - Size in bytes, include ID (all protocol versions: 60) * - __u32 Version - - Version of this structure. The documentation herein corresponds to - version xxx. The version number will be incremented when new fields are + - Version of this structure. The documentation herein covers versions 1, + 2 and 3. The version number will be incremented when new fields are added. * - __u32 Flags - A bitmask of flags: see [2_] below @@ -72,13 +74,17 @@ where all fields are in little endian order: - Bottom border of the AE Region of Interest * - __u32 Preset - Preset selector value, default: 0, unless changed by the user - * - __u32 Laser mode - - 0: off, 1: on + * - __u8 Emitter mode (v3 only) (__u32 Laser mode for v1) [8_] + - 0: off, 1: on, same as __u32 Laser mode for v1 + * - __u8 RFU byte (v3 only) + - Spare byte for future use + * - __u16 LED Power (v3 only) + - Led power value 0-360 (F416 SKU) * - :cspan:`1` *Capture Timing* * - __u32 ID - 0x80000001 * - __u32 Size - - Size in bytes (currently 40) + - Size in bytes, include ID (all protocol versions: 40) * - __u32 Version - Version of this structure. The documentation herein corresponds to version xxx. The version number will be incremented when new fields are @@ -101,7 +107,7 @@ where all fields are in little endian order: * - __u32 ID - 0x80000002 * - __u32 Size - - Size in bytes (currently 40) + - Size in bytes, include ID (v1:36, v3:40) * - __u32 Version - Version of this structure. The documentation herein corresponds to version xxx. The version number will be incremented when new fields are @@ -124,6 +130,14 @@ where all fields are in little endian order: - Requested frame rate per second * - __u16 Trigger - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger + * - __u16 Calibration count (v3 only) + - Calibration counter, see [4_] below + * - __u8 GPIO input data (v3 only) + - GPIO readout, see [4_] below (Supported from FW 5.12.7.0) + * - __u32 Sub-preset info (v3 only) + - Sub-preset choice information, see [4_] below + * - __u8 reserved (v3 only) + - RFU byte. .. _1: @@ -140,6 +154,8 @@ where all fields are in little endian order: 0x00000010 Exposure priority 0x00000020 AE ROI 0x00000040 Preset + 0x00000080 Emitter mode + 0x00000100 LED Power .. _3: @@ -165,6 +181,8 @@ where all fields are in little endian order: 0x00000040 Framerate 0x00000080 Trigger 0x00000100 Cal count + 0x00000200 GPIO Input Data + 0x00000400 Sub-preset Info .. _5: @@ -211,3 +229,24 @@ Left sensor: :: Fish Eye sensor: :: 1 RAW8 + +.. _8: + +[8] The "Laser mode" has been replaced in version 3 by three different fields. +"Laser" has been renamed to "Emitter" as there are multiple technologies for +camera projectors. As we have another field for "Laser Power" we introduced +"LED Power" for extra emitter. + +The "Laser mode" __u32 fiels has been split into: :: + 1 __u8 Emitter mode + 2 __u8 RFU byte + 3 __u16 LED Power + +This is a change between versions 1 and 3. All versions 1, 2 and 3 are backward +compatible with the same data format and they are supported. See [2_] for which +attributes are valid. + +.. _9: + +[9] LibRealSense SDK metadata source: +https://github.com/IntelRealSense/librealsense/blob/master/src/metadata.h diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst index 84d81dd7a7b5..84d81dd7a7b5 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst index fa04f00bcd2e..fa04f00bcd2e 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst index 784346d14bbd..784346d14bbd 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst index 7173e2c3e245..7173e2c3e245 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst index 8d886feb180c..8d886feb180c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst index d8830ff605de..d8830ff605de 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst index 06b78e5589d2..806ed73ac474 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst @@ -258,6 +258,22 @@ Compressed Formats RV9 players - the format and decoder did not change, only the encoder did. As a result, it uses the same FourCC. + * .. _V4L2-PIX-FMT-AV1-FRAME: + + - ``V4L2_PIX_FMT_AV1_FRAME`` + - 'AV1F' + - AV1 parsed frame, including the frame header, as extracted from the container. + This format is adapted for stateless video decoders that implement a AV1 + pipeline with the :ref:`stateless_decoder`. Metadata associated with the + frame to decode is required to be passed through the + ``V4L2_CID_STATELESS_AV1_SEQUENCE``, ``V4L2_CID_STATELESS_AV1_FRAME``, + and ``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY`` controls. + See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-av1>`. + Exactly one output and one capture buffer must be provided for use with + this pixel format. The output buffer must contain the appropriate number + of macroblocks to decode a full corresponding frame to the matching + capture buffer. + .. raw:: latex \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 72324274f20c..1840224faa41 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -137,6 +137,13 @@ All components are stored with the same number of bits per component. - Cb, Cr - No - Linear + * - V4L2_PIX_FMT_NV15_4L4 + - 'VT15' + - 15 + - 4:2:0 + - Cb, Cr + - Yes + - 4x4 tiles * - V4L2_PIX_FMT_NV16 - 'NV16' - 8 @@ -378,6 +385,15 @@ two non-contiguous planes. Example V4L2_PIX_FMT_NV12MT memory layout of tiles +.. _V4L2-PIX-FMT-NV15-4L4: + +Tiled NV15 +---------- + +Semi-planar 10-bit YUV 4:2:0 formats, using 4x4 tiling. +All components are packed without any padding between each other. +As a side-effect, each group of 4 components are stored over 5 bytes +(YYYY or UVUV = 4 * 10 bits = 40 bits = 5 bytes). .. _V4L2-PIX-FMT-NV16: .. _V4L2-PIX-FMT-NV61: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index 5292d5e1a91f..f9f73530a6be 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -185,12 +185,12 @@ still cause this situation. - ``p_u32`` - A pointer to a matrix control of unsigned 32-bit values. Valid if this control is of type ``V4L2_CTRL_TYPE_U32``. - * - __u32 * + * - __s32 * - ``p_s32`` - A pointer to a matrix control of signed 32-bit values. Valid if this control is of type ``V4L2_CTRL_TYPE_INTEGER`` and ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set. - * - __u32 * + * - __s64 * - ``p_s64`` - A pointer to a matrix control of signed 64-bit values. Valid if this control is of type ``V4L2_CTRL_TYPE_INTEGER64`` and @@ -279,6 +279,22 @@ still cause this situation. - ``p_hevc_decode_params`` - A pointer to a struct :c:type:`v4l2_ctrl_hevc_decode_params`. Valid if this control is of type ``V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS``. + * - struct :c:type:`v4l2_ctrl_av1_sequence` * + - ``p_av1_sequence`` + - A pointer to a struct :c:type:`v4l2_ctrl_av1_sequence`. Valid if this control is + of type ``V4L2_CTRL_TYPE_AV1_SEQUENCE``. + * - struct :c:type:`v4l2_ctrl_av1_tile_group_entry` * + - ``p_av1_tile_group_entry`` + - A pointer to a struct :c:type:`v4l2_ctrl_av1_tile_group_entry`. Valid if this control is + of type ``V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY``. + * - struct :c:type:`v4l2_ctrl_av1_frame` * + - ``p_av1_frame`` + - A pointer to a struct :c:type:`v4l2_ctrl_av1_frame`. Valid if this control is + of type ``V4L2_CTRL_TYPE_AV1_FRAME``. + * - struct :c:type:`v4l2_ctrl_av1_film_grain` * + - ``p_av1_film_grain`` + - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is + of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``. * - void * - ``ptr`` - A pointer to a compound type which can be an N-dimensional array diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index a20dfa2a933b..4d38acafe8e1 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -525,6 +525,30 @@ See also the examples in :ref:`control`. - n/a - A struct :c:type:`v4l2_ctrl_vp9_frame`, containing VP9 frame decode parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_AV1_SEQUENCE`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_av1_sequence`, containing AV1 Sequence OBU + decoding parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_av1_tile_group_entry`, containing AV1 Tile Group + OBU decoding parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_AV1_FRAME`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_av1_frame`, containing AV1 Frame/Frame + Header OBU decoding parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film Grain + parameters for stateless video decoders. .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst index 68ca343c3b44..2d6e3bbdd040 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst @@ -122,7 +122,7 @@ for all the route entries and call ``VIDIOC_SUBDEV_G_ROUTING`` again. :widths: 3 1 4 * - V4L2_SUBDEV_ROUTE_FL_ACTIVE - - 0 + - 0x0001 - The route is enabled. Set by applications. Return Value diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index 2a589d34b80e..3e58aac4ef0b 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -161,6 +161,10 @@ replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type` # V4L2 capability defines replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities diff --git a/Documentation/userspace-api/netlink/intro-specs.rst b/Documentation/userspace-api/netlink/intro-specs.rst index a3b847eafff7..bada89699455 100644 --- a/Documentation/userspace-api/netlink/intro-specs.rst +++ b/Documentation/userspace-api/netlink/intro-specs.rst @@ -78,3 +78,82 @@ to see other examples. The code generation itself is performed by ``tools/net/ynl/ynl-gen-c.py`` but it takes a few arguments so calling it directly for each file quickly becomes tedious. + +YNL lib +======= + +``tools/net/ynl/lib/`` contains an implementation of a C library +(based on libmnl) which integrates with code generated by +``tools/net/ynl/ynl-gen-c.py`` to create easy to use netlink wrappers. + +YNL basics +---------- + +The YNL library consists of two parts - the generic code (functions +prefix by ``ynl_``) and per-family auto-generated code (prefixed +with the name of the family). + +To create a YNL socket call ynl_sock_create() passing the family +struct (family structs are exported by the auto-generated code). +ynl_sock_destroy() closes the socket. + +YNL requests +------------ + +Steps for issuing YNL requests are best explained on an example. +All the functions and types in this example come from the auto-generated +code (for the netdev family in this case): + +.. code-block:: c + + // 0. Request and response pointers + struct netdev_dev_get_req *req; + struct netdev_dev_get_rsp *d; + + // 1. Allocate a request + req = netdev_dev_get_req_alloc(); + // 2. Set request parameters (as needed) + netdev_dev_get_req_set_ifindex(req, ifindex); + + // 3. Issues the request + d = netdev_dev_get(ys, req); + // 4. Free the request arguments + netdev_dev_get_req_free(req); + // 5. Error check (the return value from step 3) + if (!d) { + // 6. Print the YNL-generated error + fprintf(stderr, "YNL: %s\n", ys->err.msg); + return -1; + } + + // ... do stuff with the response @d + + // 7. Free response + netdev_dev_get_rsp_free(d); + +YNL dumps +--------- + +Performing dumps follows similar pattern as requests. +Dumps return a list of objects terminated by a special marker, +or NULL on error. Use ``ynl_dump_foreach()`` to iterate over +the result. + +YNL notifications +----------------- + +YNL lib supports using the same socket for notifications and +requests. In case notifications arrive during processing of a request +they are queued internally and can be retrieved at a later time. + +To subscribed to notifications use ``ynl_subscribe()``. +The notifications have to be read out from the socket, +``ynl_socket_get_fd()`` returns the underlying socket fd which can +be plugged into appropriate asynchronous IO API like ``poll``, +or ``select``. + +Notifications can be retrieved using ``ynl_ntf_dequeue()`` and have +to be freed using ``ynl_ntf_free()``. Since we don't know the notification +type upfront the notifications are returned as ``struct ynl_ntf_base_type *`` +and user is expected to cast them to the appropriate full type based +on the ``cmd`` member. diff --git a/Documentation/virt/guest-halt-polling.rst b/Documentation/virt/guest-halt-polling.rst index b4e747942417..922291ddc40c 100644 --- a/Documentation/virt/guest-halt-polling.rst +++ b/Documentation/virt/guest-halt-polling.rst @@ -72,7 +72,7 @@ high once achieves global guest_halt_poll_ns value). Default: Y -The module parameters can be set from the debugfs files in:: +The module parameters can be set from the sysfs files in:: /sys/module/haltpoll/parameters/ diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index add067793b90..c0ddd3035462 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -2613,7 +2613,7 @@ follows:: this vcpu, and determines which register slices are visible through this ioctl interface. -(See Documentation/arm64/sve.rst for an explanation of the "vq" +(See Documentation/arch/arm64/sve.rst for an explanation of the "vq" nomenclature.) KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT. @@ -8445,6 +8445,33 @@ structure. When getting the Modified Change Topology Report value, the attr->addr must point to a byte where the value will be stored or retrieved from. +8.40 KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE +--------------------------------------- + +:Capability: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE +:Architectures: arm64 +:Type: vm +:Parameters: arg[0] is the new split chunk size. +:Returns: 0 on success, -EINVAL if any memslot was already created. + +This capability sets the chunk size used in Eager Page Splitting. + +Eager Page Splitting improves the performance of dirty-logging (used +in live migrations) when guest memory is backed by huge-pages. It +avoids splitting huge-pages (into PAGE_SIZE pages) on fault, by doing +it eagerly when enabling dirty logging (with the +KVM_MEM_LOG_DIRTY_PAGES flag for a memory region), or when using +KVM_CLEAR_DIRTY_LOG. + +The chunk size specifies how many pages to break at a time, using a +single allocation for each chunk. Bigger the chunk size, more pages +need to be allocated ahead of time. + +The chunk size needs to be a valid block size. The list of acceptable +block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a +64-bit bitmap (each bit describing a block size). The default value is +0, to disable the eager page splitting. + 9. Known KVM API problems ========================= diff --git a/Documentation/virt/kvm/halt-polling.rst b/Documentation/virt/kvm/halt-polling.rst index 3fae39b1a5ba..4f1a1b23d99c 100644 --- a/Documentation/virt/kvm/halt-polling.rst +++ b/Documentation/virt/kvm/halt-polling.rst @@ -112,11 +112,11 @@ powerpc kvm-hv case. | | function. | | +-----------------------+---------------------------+-------------------------+ -These module parameters can be set from the debugfs files in: +These module parameters can be set from the sysfs files in: /sys/module/kvm/parameters/ -Note: that these module parameters are system wide values and are not able to +Note: these module parameters are system-wide values and are not able to be tuned on a per vm basis. Any changes to these parameters will be picked up by new and existing vCPUs the @@ -142,12 +142,12 @@ Further Notes global max polling interval (halt_poll_ns) then the host will always poll for the entire block time and thus cpu utilisation will go to 100%. -- Halt polling essentially presents a trade off between power usage and latency and +- Halt polling essentially presents a trade-off between power usage and latency and the module parameters should be used to tune the affinity for this. Idle cpu time is essentially converted to host kernel time with the aim of decreasing latency when entering the guest. - Halt polling will only be conducted by the host when no other tasks are runnable on that cpu, otherwise the polling will cease immediately and schedule will be invoked to - allow that other task to run. Thus this doesn't allow a guest to denial of service the - cpu. + allow that other task to run. Thus this doesn't allow a guest to cause denial of service + of the cpu. diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst index 8c77554e4896..3a034db5e55f 100644 --- a/Documentation/virt/kvm/locking.rst +++ b/Documentation/virt/kvm/locking.rst @@ -67,7 +67,7 @@ following two cases: 2. Write-Protection: The SPTE is present and the fault is caused by write-protect. That means we just need to change the W bit of the spte. -What we use to avoid all the race is the Host-writable bit and MMU-writable bit +What we use to avoid all the races is the Host-writable bit and MMU-writable bit on the spte: - Host-writable means the gfn is writable in the host kernel page tables and in @@ -130,7 +130,7 @@ to gfn. For indirect sp, we disabled fast page fault for simplicity. A solution for indirect sp could be to pin the gfn, for example via kvm_vcpu_gfn_to_pfn_atomic, before the cmpxchg. After the pinning: -- We have held the refcount of pfn that means the pfn can not be freed and +- We have held the refcount of pfn; that means the pfn can not be freed and be reused for another gfn. - The pfn is writable and therefore it cannot be shared between different gfns by KSM. @@ -186,22 +186,22 @@ writable between reading spte and updating spte. Like below case: The Dirty bit is lost in this case. In order to avoid this kind of issue, we always treat the spte as "volatile" -if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means, +if it can be updated out of mmu-lock [see spte_has_volatile_bits()]; it means the spte is always atomically updated in this case. 3) flush tlbs due to spte updated -If the spte is updated from writable to readonly, we should flush all TLBs, +If the spte is updated from writable to read-only, we should flush all TLBs, otherwise rmap_write_protect will find a read-only spte, even though the writable spte might be cached on a CPU's TLB. As mentioned before, the spte can be updated to writable out of mmu-lock on -fast page fault path, in order to easily audit the path, we see if TLBs need -be flushed caused by this reason in mmu_spte_update() since this is a common +fast page fault path. In order to easily audit the path, we see if TLBs needing +to be flushed caused this reason in mmu_spte_update() since this is a common function to update spte (present -> present). Since the spte is "volatile" if it can be updated out of mmu-lock, we always -atomically update the spte, the race caused by fast page fault can be avoided, +atomically update the spte and the race caused by fast page fault can be avoided. See the comments in spte_has_volatile_bits() and mmu_spte_update(). Lockless Access Tracking: @@ -283,9 +283,9 @@ time it will be set using the Dirty tracking mechanism described above. :Arch: x86 :Protects: wakeup_vcpus_on_cpu :Comment: This is a per-CPU lock and it is used for VT-d posted-interrupts. - When VT-d posted-interrupts is supported and the VM has assigned + When VT-d posted-interrupts are supported and the VM has assigned devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu - protected by blocked_vcpu_on_cpu_lock, when VT-d hardware issues + protected by blocked_vcpu_on_cpu_lock. When VT-d hardware issues wakeup notification event since external interrupts from the assigned devices happens, we will find the vCPU on the list to wakeup. diff --git a/Documentation/virt/kvm/ppc-pv.rst b/Documentation/virt/kvm/ppc-pv.rst index 5fdb907670be..740d03d25300 100644 --- a/Documentation/virt/kvm/ppc-pv.rst +++ b/Documentation/virt/kvm/ppc-pv.rst @@ -89,7 +89,7 @@ also define a new hypercall feature to indicate that the host can give you more registers. Only if the host supports the additional features, make use of them. The magic page layout is described by struct kvm_vcpu_arch_shared -in arch/powerpc/include/asm/kvm_para.h. +in arch/powerpc/include/uapi/asm/kvm_para.h. Magic page features =================== @@ -112,7 +112,7 @@ Magic page flags ================ In addition to features that indicate whether a host is capable of a particular -feature we also have a channel for a guest to tell the guest whether it's capable +feature we also have a channel for a guest to tell the host whether it's capable of something. This is what we call "flags". Flags are passed to the host in the low 12 bits of the Effective Address. @@ -139,7 +139,7 @@ Patched instructions ==================== The "ld" and "std" instructions are transformed to "lwz" and "stw" instructions -respectively on 32 bit systems with an added offset of 4 to accommodate for big +respectively on 32-bit systems with an added offset of 4 to accommodate for big endianness. The following is a list of mapping the Linux kernel performs when running as @@ -210,7 +210,7 @@ available on all targets. 2) PAPR hypercalls PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU). -These are the same hypercalls that pHyp, the POWER hypervisor implements. Some of +These are the same hypercalls that pHyp, the POWER hypervisor, implements. Some of them are handled in the kernel, some are handled in user space. This is only available on book3s_64. diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst index 87f04c1fa53d..06718b9bc959 100644 --- a/Documentation/virt/kvm/vcpu-requests.rst +++ b/Documentation/virt/kvm/vcpu-requests.rst @@ -101,7 +101,7 @@ also be used, e.g. :: However, VCPU request users should refrain from doing so, as it would break the abstraction. The first 8 bits are reserved for architecture -independent requests, all additional bits are available for architecture +independent requests; all additional bits are available for architecture dependent requests. Architecture Independent Requests @@ -151,8 +151,8 @@ KVM_REQUEST_NO_WAKEUP This flag is applied to requests that only need immediate attention from VCPUs running in guest mode. That is, sleeping VCPUs do not need - to be awaken for these requests. Sleeping VCPUs will handle the - requests when they are awaken later for some other reason. + to be awakened for these requests. Sleeping VCPUs will handle the + requests when they are awakened later for some other reason. KVM_REQUEST_WAIT diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst index 487b6328b3e7..995780088eb2 100644 --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -57,7 +57,7 @@ information, see the SEV Key Management spec [api-spec]_ The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP. If the argument to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled -and ``ENOTTY` if it is disabled (on some older versions of Linux, +and ``ENOTTY`` if it is disabled (on some older versions of Linux, the ioctl runs normally even with a NULL argument, and therefore will likely return ``EFAULT``). If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP must be a struct kvm_sev_cmd:: diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst index 8364afa228ec..26f62034b6f3 100644 --- a/Documentation/virt/kvm/x86/mmu.rst +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -205,7 +205,7 @@ Shadow pages contain the following information: role.passthrough: The page is not backed by a guest page table, but its first entry points to one. This is set if NPT uses 5-level page tables (host - CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=1). + CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=0). gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. diff --git a/Documentation/virt/paravirt_ops.rst b/Documentation/virt/paravirt_ops.rst index 6b789d27cead..62d867e0d4d6 100644 --- a/Documentation/virt/paravirt_ops.rst +++ b/Documentation/virt/paravirt_ops.rst @@ -5,31 +5,31 @@ Paravirt_ops ============ Linux provides support for different hypervisor virtualization technologies. -Historically different binary kernels would be required in order to support -different hypervisors, this restriction was removed with pv_ops. +Historically, different binary kernels would be required in order to support +different hypervisors; this restriction was removed with pv_ops. Linux pv_ops is a virtualization API which enables support for different hypervisors. It allows each hypervisor to override critical operations and allows a single kernel binary to run on all supported execution environments including native machine -- without any hypervisors. pv_ops provides a set of function pointers which represent operations -corresponding to low level critical instructions and high level -functionalities in various areas. pv-ops allows for optimizations at run -time by enabling binary patching of the low-ops critical operations +corresponding to low-level critical instructions and high-level +functionalities in various areas. pv_ops allows for optimizations at run +time by enabling binary patching of the low-level critical operations at boot time. pv_ops operations are classified into three categories: - simple indirect call - These operations correspond to high level functionality where it is + These operations correspond to high-level functionality where it is known that the overhead of indirect call isn't very important. - indirect call which allows optimization with binary patch - Usually these operations correspond to low level critical instructions. They + Usually these operations correspond to low-level critical instructions. They are called frequently and are performance critical. The overhead is very important. - a set of macros for hand written assembly code Hand written assembly codes (.S files) also need paravirtualization - because they include sensitive instructions or some of code paths in + because they include sensitive instructions or some code paths in them are very performance critical. diff --git a/Documentation/wmi/acpi-interface.rst b/Documentation/wmi/acpi-interface.rst new file mode 100644 index 000000000000..d31af0ed9c08 --- /dev/null +++ b/Documentation/wmi/acpi-interface.rst @@ -0,0 +1,96 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +================== +ACPI WMI interface +================== + +The ACPI WMI interface is a proprietary extension of the ACPI specification made +by Microsoft to allow hardware vendors to embed WMI (Windows Management Instrumentation) +objects inside their ACPI firmware. Typical functions implemented over ACPI WMI +are hotkey events on modern notebooks and configuration of BIOS options. + +PNP0C14 ACPI device +------------------- + +Discovery of WMI objects is handled by defining ACPI devices with a PNP ID +of ``PNP0C14``. These devices will contain a set of ACPI buffers and methods +used for mapping and execution of WMI methods and/or queries. If there exist +multiple of such devices, then each device is required to have a +unique ACPI UID. + +_WDG buffer +----------- + +The ``_WDG`` buffer is used to discover WMI objects and is required to be +static. Its internal structure consists of data blocks with a size of 20 bytes, +containing the following data: + +======= =============== ===================================================== +Offset Size (in bytes) Content +======= =============== ===================================================== +0x00 16 128 bit Variant 2 object GUID. +0x10 2 2 character method ID or single byte notification ID. +0x12 1 Object instance count. +0x13 1 Object flags. +======= =============== ===================================================== + +The WMI object flags control whether the method or notification ID is used: + +- 0x1: Data block usage is expensive and must be explicitly enabled/disabled. +- 0x2: Data block contains WMI methods. +- 0x4: Data block contains ASCIZ string. +- 0x8: Data block describes a WMI event, use notification ID instead + of method ID. + +Each WMI object GUID can appear multiple times inside a system. +The method/notification ID is used to construct the ACPI method names used for +interacting with the WMI object. + +WQxx ACPI methods +----------------- + +If a data block does not contain WMI methods, then its content can be retrieved +by this required ACPI method. The last two characters of the ACPI method name +are the method ID of the data block to query. Their single parameter is an +integer describing the instance which should be queried. This parameter can be +omitted if the data block contains only a single instance. + +WSxx ACPI methods +----------------- + +Similar to the ``WQxx`` ACPI methods, except that it is optional and takes an +additional buffer as its second argument. The instance argument also cannot +be omitted. + +WMxx ACPI methods +----------------- + +Used for executing WMI methods associated with a data block. The last two +characters of the ACPI method name are the method ID of the data block +containing the WMI methods. Their first parameter is a integer describing the +instance which methods should be executed. The second parameter is an integer +describing the WMI method ID to execute, and the third parameter is a buffer +containing the WMI method parameters. If the data block is marked as containing +an ASCIZ string, then this buffer should contain an ASCIZ string. The ACPI +method will return the result of the executed WMI method. + +WExx ACPI methods +----------------- + +Used for optionally enabling/disabling WMI events, the last two characters of +the ACPI method are the notification ID of the data block describing the WMI +event as hexadecimal value. Their first parameter is an integer with a value +of 0 if the WMI event should be disabled, other values will enable +the WMI event. + +WCxx ACPI methods +----------------- +Similar to the ``WExx`` ACPI methods, except that it controls data collection +instead of events and thus the last two characters of the ACPI method name are +the method ID of the data block to enable/disable. + +_WED ACPI method +---------------- + +Used to retrieve additional WMI event data, its single parameter is a integer +holding the notification ID of the event. diff --git a/Documentation/wmi/devices/dell-wmi-ddv.rst b/Documentation/wmi/devices/dell-wmi-ddv.rst new file mode 100644 index 000000000000..d8aa64e9c827 --- /dev/null +++ b/Documentation/wmi/devices/dell-wmi-ddv.rst @@ -0,0 +1,296 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +============================================ +Dell DDV WMI interface driver (dell-wmi-ddv) +============================================ + +Introduction +============ + +Many Dell notebooks made after ~2020 support a WMI-based interface for +retrieving various system data like battery temperature, ePPID, diagostic data +and fan/thermal sensor data. + +This interface is likely used by the `Dell Data Vault` software on Windows, +so it was called `DDV`. Currently the ``dell-wmi-ddv`` driver supports +version 2 and 3 of the interface, with support for new interface versions +easily added. + +.. warning:: The interface is regarded as internal by Dell, so no vendor + documentation is available. All knowledge was thus obtained by + trial-and-error, please keep that in mind. + +Dell ePPID (electronic Piece Part Identification) +================================================= + +The Dell ePPID is used to uniquely identify components in Dell machines, +including batteries. It has a form similar to `CC-PPPPPP-MMMMM-YMD-SSSS-FFF` +and contains the following information: + +* Country code of origin (CC). +* Part number with the first character being a filling number (PPPPPP). +* Manufacture Identification (MMMMM). +* Manufacturing Year/Month/Date (YMD) in base 36, with Y being the last digit + of the year. +* Manufacture Sequence Number (SSSS). +* Optional Firmware Version/Revision (FFF). + +The `eppidtool <https://pypi.org/project/eppidtool>`_ python utility can be used +to decode and display this information. + +All information regarding the Dell ePPID was gathered using Dell support +documentation and `this website <https://telcontar.net/KBK/Dell/date_codes>`_. + +WMI interface description +========================= + +The WMI interface description can be decoded from the embedded binary MOF (bmof) +data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("WMI Function"), guid("{8A42EA14-4F2A-FD45-6422-0087F7A7E608}")] + class DDVWmiMethodFunction { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiMethodId(1), Implemented, read, write, Description("Return Battery Design Capacity.")] void BatteryDesignCapacity([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(2), Implemented, read, write, Description("Return Battery Full Charge Capacity.")] void BatteryFullChargeCapacity([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(3), Implemented, read, write, Description("Return Battery Manufacture Name.")] void BatteryManufactureName([in] uint32 arg2, [out] string argr); + [WmiMethodId(4), Implemented, read, write, Description("Return Battery Manufacture Date.")] void BatteryManufactureDate([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(5), Implemented, read, write, Description("Return Battery Serial Number.")] void BatterySerialNumber([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(6), Implemented, read, write, Description("Return Battery Chemistry Value.")] void BatteryChemistryValue([in] uint32 arg2, [out] string argr); + [WmiMethodId(7), Implemented, read, write, Description("Return Battery Temperature.")] void BatteryTemperature([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(8), Implemented, read, write, Description("Return Battery Current.")] void BatteryCurrent([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(9), Implemented, read, write, Description("Return Battery Voltage.")] void BatteryVoltage([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(10), Implemented, read, write, Description("Return Battery Manufacture Access(MA code).")] void BatteryManufactureAceess([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(11), Implemented, read, write, Description("Return Battery Relative State-Of-Charge.")] void BatteryRelativeStateOfCharge([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(12), Implemented, read, write, Description("Return Battery Cycle Count")] void BatteryCycleCount([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(13), Implemented, read, write, Description("Return Battery ePPID")] void BatteryePPID([in] uint32 arg2, [out] string argr); + [WmiMethodId(14), Implemented, read, write, Description("Return Battery Raw Analytics Start")] void BatteryeRawAnalyticsStart([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(15), Implemented, read, write, Description("Return Battery Raw Analytics")] void BatteryeRawAnalytics([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]); + [WmiMethodId(16), Implemented, read, write, Description("Return Battery Design Voltage.")] void BatteryDesignVoltage([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(17), Implemented, read, write, Description("Return Battery Raw Analytics A Block")] void BatteryeRawAnalyticsABlock([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]); + [WmiMethodId(18), Implemented, read, write, Description("Return Version.")] void ReturnVersion([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(32), Implemented, read, write, Description("Return Fan Sensor Information")] void FanSensorInformation([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]); + [WmiMethodId(34), Implemented, read, write, Description("Return Thermal Sensor Information")] void ThermalSensorInformation([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]); + }; + +Each WMI method takes an ACPI buffer containing a 32-bit index as input argument, +with the first 8 bit being used to specify the battery when using battery-related +WMI methods. Other WMI methods may ignore this argument or interpret it +differently. The WMI method output format varies: + +* if the function has only a single output, then an ACPI object + of the corresponding type is returned +* if the function has multiple outputs, when an ACPI package + containing the outputs in the same order is returned + +The format of the output should be thoroughly checked, since many methods can +return malformed data in case of an error. + +The data format of many battery-related methods seems to be based on the +`Smart Battery Data Specification`, so unknown battery-related methods are +likely to follow this standard in some way. + +WMI method GetBatteryDesignCapacity() +------------------------------------- + +Returns the design capacity of the battery in mAh as an u16. + +WMI method BatteryFullCharge() +------------------------------ + +Returns the full charge capacity of the battery in mAh as an u16. + +WMI method BatteryManufactureName() +----------------------------------- + +Returns the manufacture name of the battery as an ASCII string. + +WMI method BatteryManufactureDate() +----------------------------------- + +Returns the manufacture date of the battery as an u16. +The date is encoded in the following manner: + +- bits 0 to 4 contain the manufacture day. +- bits 5 to 8 contain the manufacture month. +- bits 9 to 15 contain the manufacture year biased by 1980. + +.. note:: + The data format needs to be verified on more machines. + +WMI method BatterySerialNumber() +-------------------------------- + +Returns the serial number of the battery as an u16. + +WMI method BatteryChemistryValue() +---------------------------------- + +Returns the chemistry of the battery as an ASCII string. +Known values are: + +- "Li-I" for Li-Ion + +WMI method BatteryTemperature() +------------------------------- + +Returns the temperature of the battery in tenth degree kelvin as an u16. + +WMI method BatteryCurrent() +--------------------------- + +Returns the current flow of the battery in mA as an s16. +Negative values indicate discharging. + +WMI method BatteryVoltage() +--------------------------- + +Returns the voltage flow of the battery in mV as an u16. + +WMI method BatteryManufactureAccess() +------------------------------------- + +Returns a manufacture-defined value as an u16. + +WMI method BatteryRelativeStateOfCharge() +----------------------------------------- + +Returns the capacity of the battery in percent as an u16. + +WMI method BatteryCycleCount() +------------------------------ + +Returns the cycle count of the battery as an u16. + +WMI method BatteryePPID() +------------------------- + +Returns the ePPID of the battery as an ASCII string. + +WMI method BatteryeRawAnalyticsStart() +-------------------------------------- + +Performs an analysis of the battery and returns a status code: + +- ``0x0``: Success +- ``0x1``: Interface not supported +- ``0xfffffffe``: Error/Timeout + +.. note:: + The meaning of this method is still largely unknown. + +WMI method BatteryeRawAnalytics() +--------------------------------- + +Returns a buffer usually containg 12 blocks of analytics data. +Those blocks contain: +- block number starting with 0 (u8) +- 31 bytes of unknown data + +.. note:: + The meaning of this method is still largely unknown. + +WMI method BatteryDesignVoltage() +--------------------------------- + +Returns the design voltage of the battery in mV as an u16. + +WMI method BatteryeRawAnalyticsABlock() +--------------------------------------- + +Returns a single block of analytics data, with the second byte +of the index being used for selecting the block number. + +*Supported since WMI interface version 3!* + +.. note:: + The meaning of this method is still largely unknown. + +WMI method ReturnVersion() +-------------------------- + +Returns the WMI interface version as an u32. + +WMI method FanSensorInformation() +--------------------------------- + +Returns a buffer containg fan sensor entries, terminated +with a single ``0xff``. +Those entries contain: + +- fan type (u8) +- fan speed in RPM (little endian u16) + +WMI method ThermalSensorInformation() +------------------------------------- + +Returns a buffer containing thermal sensor entries, terminated +with a single ``0xff``. +Those entries contain: + +- thermal type (u8) +- current temperature (s8) +- min. temperature (s8) +- max. temperature (s8) +- unknown field (u8) + +.. note:: + TODO: Find out what the meaning of the last byte is. + +ACPI battery matching algorithm +=============================== + +The algorithm used to match ACPI batteries to indices is based on information +which was found inside the logging messages of the OEM software. + +Basically for each new ACPI battery, the serial numbers of the batteries behind +indices 1 till 3 are compared with the serial number of the ACPI battery. +Since the serial number of the ACPI battery can either be encoded as a normal +integer or as a hexadecimal value, both cases need to be checked. The first +index with a matching serial number is then selected. + +A serial number of 0 indicates that the corresponding index is not associated +with an actual battery, or that the associated battery is not present. + +Some machines like the Dell Inspiron 3505 only support a single battery and thus +ignore the battery index. Because of this the driver depends on the ACPI battery +hook mechanism to discover batteries. + +.. note:: + The ACPI battery matching algorithm currently used inside the driver is + outdated and does not match the algorithm described above. The reasons for + this are differences in the handling of the ToHexString() ACPI opcode between + Linux and Windows, which distorts the serial number of ACPI batteries on many + machines. Until this issue is resolved, the driver cannot use the above + algorithm. + +Reverse-Engineering the DDV WMI interface +========================================= + +1. Find a supported Dell notebook, usually made after ~2020. +2. Dump the ACPI tables and search for the WMI device (usually called "ADDV"). +3. Decode the corresponding bmof data and look at the ASL code. +4. Try to deduce the meaning of a certain WMI method by comparing the control + flow with other ACPI methods (_BIX or _BIF for battery related methods + for example). +5. Use the built-in UEFI diagostics to view sensor types/values for fan/thermal + related methods (sometimes overwriting static ACPI data fields can be used + to test different sensor type values, since on some machines this data is + not reinitialized upon a warm reset). + +Alternatively: + +1. Load the ``dell-wmi-ddv`` driver, use the ``force`` module param + if necessary. +2. Use the debugfs interface to access the raw fan/thermal sensor buffer data. +3. Compare the data with the built-in UEFI diagnostics. + +In case the DDV WMI interface version available on your Dell notebook is not +supported or you are seeing unknown fan/thermal sensors, please submit a +bugreport on `bugzilla <https://bugzilla.kernel.org>`_ so they can be added +to the ``dell-wmi-ddv`` driver. + +See Documentation/admin-guide/reporting-issues.rst for further information. diff --git a/Documentation/wmi/devices/index.rst b/Documentation/wmi/devices/index.rst new file mode 100644 index 000000000000..c08735a9d7df --- /dev/null +++ b/Documentation/wmi/devices/index.rst @@ -0,0 +1,22 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +============================= +Driver-specific Documentation +============================= + +This section provides information about various devices supported by +the Linux kernel, their protocols and driver details. + +.. toctree:: + :maxdepth: 1 + :numbered: + :glob: + + * + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/wmi/devices/wmi-bmof.rst b/Documentation/wmi/devices/wmi-bmof.rst new file mode 100644 index 000000000000..ca1ee9a29be3 --- /dev/null +++ b/Documentation/wmi/devices/wmi-bmof.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +============================== +WMI embedded Binary MOF driver +============================== + +Introduction +============ + +Many machines embed WMI Binary MOF (Managed Object Format) metadata used to +describe the details of their ACPI WMI interfaces. The data can be decoded +with tools like `bmfdec <https://github.com/pali/bmfdec>`_ to obtain a +human readable WMI interface description, which is useful for developing +new WMI drivers. + +The Binary MOF data can be retrieved from the ``bmof`` sysfs attribute of the +associated WMI device. Please note that multiple WMI devices containing Binary +MOF data can exist on a given system. + +WMI interface +============= + +The Binary MOF WMI device is identified by the WMI GUID ``05901221-D566-11D1-B2F0-00A0C9062910``. +The Binary MOF can be obtained by doing a WMI data block query. The result is +then returned as an ACPI buffer with a variable size. diff --git a/Documentation/wmi/index.rst b/Documentation/wmi/index.rst new file mode 100644 index 000000000000..537cff188e14 --- /dev/null +++ b/Documentation/wmi/index.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +============= +WMI Subsystem +============= + +.. toctree:: + :maxdepth: 1 + + acpi-interface + devices/index + +.. only:: subproject and html + + + Indices + ======= + + * :ref:`genindex` |