diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/admin-guide/perf/hisi-pcie-pmu.rst | 32 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/starfive_starlink_pmu.rst | 46 | ||||
| -rw-r--r-- | Documentation/arch/arm64/elf_hwcaps.rst | 49 | ||||
| -rw-r--r-- | Documentation/arch/arm64/silicon-errata.rst | 5 | ||||
| -rw-r--r-- | Documentation/arch/arm64/sme.rst | 11 | ||||
| -rw-r--r-- | Documentation/arch/arm64/sve.rst | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml | 39 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml | 46 | ||||
| -rw-r--r-- | Documentation/rust/arch-support.rst | 1 |
10 files changed, 216 insertions, 24 deletions
diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst index 7e863662e2d4..5541ff40e06a 100644 --- a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst @@ -37,9 +37,21 @@ Example usage of perf:: hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event] ------------------------------------------ - $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/ - $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/ - $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0xffff/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/ + +The related events usually used to calculate the bandwidth, latency or others. +They need to start and end counting at the same time, therefore related events +are best used in the same event group to get the expected value. There are two +ways to know if they are related events: + +a) By event name, such as the latency events "xxx_latency, xxx_cnt" or + bandwidth events "xxx_flux, xxx_time". +b) By event type, such as "event=0xXXXX, event=0x1XXXX". + +Example usage of perf group:: + + $# perf stat -e "{hisi_pcie0_core0/rx_mwr_latency,port=0xffff/,hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/}" The current driver does not support sampling. So "perf record" is unsupported. Also attach to a task is unsupported for PCIe PMU. @@ -51,8 +63,12 @@ Filter options PMU could only monitor the performance of traffic downstream target Root Ports or downstream target Endpoint. PCIe PMU driver support "port" and - "bdf" interfaces for users, and these two interfaces aren't supported at the - same time. + "bdf" interfaces for users. + Please notice that, one of these two interfaces must be set, and these two + interfaces aren't supported at the same time. If they are both set, only + "port" filter is valid. + If "port" filter not being set or is set explicitly to zero (default), the + "bdf" filter will be in effect, because "bdf=0" meaning 0000:000:00.0. - port @@ -95,7 +111,7 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,trig_len=0x4,trig_mode=1/ sleep 5 3. Threshold filter @@ -109,7 +125,7 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,thr_len=0x4,thr_mode=1/ sleep 5 4. TLP Length filter @@ -127,4 +143,4 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,len_mode=0x1/ sleep 5 diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index f4a4513c526f..7eb3dcd6f4da 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -13,6 +13,7 @@ Performance monitor support imx-ddr qcom_l2_pmu qcom_l3_pmu + starfive_starlink_pmu arm-ccn arm-cmn xgene-pmu diff --git a/Documentation/admin-guide/perf/starfive_starlink_pmu.rst b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst new file mode 100644 index 000000000000..2932ddb4eb76 --- /dev/null +++ b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst @@ -0,0 +1,46 @@ +================================================ +StarFive StarLink Performance Monitor Unit (PMU) +================================================ + +StarFive StarLink Performance Monitor Unit (PMU) exists within the +StarLink Coherent Network on Chip (CNoC) that connects multiple CPU +clusters with an L3 memory system. + +The uncore PMU supports overflow interrupt, up to 16 programmable 64bit +event counters, and an independent 64bit cycle counter. +The PMU can only be accessed via Memory Mapped I/O and are common to the +cores connected to the same PMU. + +Driver exposes supported PMU events in sysfs "events" directory under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/events/ + +Driver exposes cpu used to handle PMU events in sysfs "cpumask" directory +under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/cpumask/ + +Driver describes the format of config (event ID) in sysfs "format" directory +under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/format/ + +Example of perf usage:: + + $ perf list + + starfive_starlink_pmu/cycles/ [Kernel PMU event] + starfive_starlink_pmu/read_hit/ [Kernel PMU event] + starfive_starlink_pmu/read_miss/ [Kernel PMU event] + starfive_starlink_pmu/read_request/ [Kernel PMU event] + starfive_starlink_pmu/release_request/ [Kernel PMU event] + starfive_starlink_pmu/write_hit/ [Kernel PMU event] + starfive_starlink_pmu/write_miss/ [Kernel PMU event] + starfive_starlink_pmu/write_request/ [Kernel PMU event] + starfive_starlink_pmu/writeback/ [Kernel PMU event] + + + $ perf stat -a -e /starfive_starlink_pmu/cycles/ sleep 1 + +Sampling is not supported. As a result, "perf record" is not supported. +Attaching to a task is not supported, only system-wide counting is supported. diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index ced7b335e2e0..448c1664879b 100644 --- a/Documentation/arch/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -317,6 +317,55 @@ HWCAP2_LRCPC3 HWCAP2_LSE128 Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0011. +HWCAP2_FPMR + Functionality implied by ID_AA64PFR2_EL1.FMR == 0b0001. + +HWCAP2_LUT + Functionality implied by ID_AA64ISAR2_EL1.LUT == 0b0001. + +HWCAP2_FAMINMAX + Functionality implied by ID_AA64ISAR3_EL1.FAMINMAX == 0b0001. + +HWCAP2_F8CVT + Functionality implied by ID_AA64FPFR0_EL1.F8CVT == 0b1. + +HWCAP2_F8FMA + Functionality implied by ID_AA64FPFR0_EL1.F8FMA == 0b1. + +HWCAP2_F8DP4 + Functionality implied by ID_AA64FPFR0_EL1.F8DP4 == 0b1. + +HWCAP2_F8DP2 + Functionality implied by ID_AA64FPFR0_EL1.F8DP2 == 0b1. + +HWCAP2_F8E4M3 + Functionality implied by ID_AA64FPFR0_EL1.F8E4M3 == 0b1. + +HWCAP2_F8E5M2 + Functionality implied by ID_AA64FPFR0_EL1.F8E5M2 == 0b1. + +HWCAP2_SME_LUTV2 + Functionality implied by ID_AA64SMFR0_EL1.LUTv2 == 0b1. + +HWCAP2_SME_F8F16 + Functionality implied by ID_AA64SMFR0_EL1.F8F16 == 0b1. + +HWCAP2_SME_F8F32 + Functionality implied by ID_AA64SMFR0_EL1.F8F32 == 0b1. + +HWCAP2_SME_SF8FMA + Functionality implied by ID_AA64SMFR0_EL1.SF8FMA == 0b1. + +HWCAP2_SME_SF8DP4 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1. + +HWCAP2_SME_SF8DP2 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP2 == 0b1. + +HWCAP2_SME_SF8DP4 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1. + + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index e8c2ce1f9df6..fa16b895c997 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -35,8 +35,9 @@ can be triggered by Linux). For software workarounds that may adversely impact systems unaffected by the erratum in question, a Kconfig entry is added under "Kernel Features" -> "ARM errata workarounds via the alternatives framework". -These are enabled by default and patched in at runtime when an affected -CPU is detected. For less-intrusive workarounds, a Kconfig option is not +With the exception of workarounds for errata deemed "rare" by Arm, these +are enabled by default and patched in at runtime when an affected CPU is +detected. For less-intrusive workarounds, a Kconfig option is not available and the code is structured (preferably with a comment) in such a way that the erratum will not be hit. diff --git a/Documentation/arch/arm64/sme.rst b/Documentation/arch/arm64/sme.rst index 3d0e53ecac4f..be317d457417 100644 --- a/Documentation/arch/arm64/sme.rst +++ b/Documentation/arch/arm64/sme.rst @@ -75,7 +75,7 @@ model features for SME is included in Appendix A. 2. Vector lengths ------------------ -SME defines a second vector length similar to the SVE vector length which is +SME defines a second vector length similar to the SVE vector length which controls the size of the streaming mode SVE vectors and the ZA matrix array. The ZA matrix is square with each side having as many bytes as a streaming mode SVE vector. @@ -238,12 +238,12 @@ prctl(PR_SME_SET_VL, unsigned long arg) bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become unspecified, including both streaming and non-streaming SVE state. Calling PR_SME_SET_VL with vl equal to the thread's current vector - length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag, + length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag, does not constitute a change to the vector length for this purpose. * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared. Calling PR_SME_SET_VL with vl equal to the thread's current vector - length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag, + length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag, does not constitute a change to the vector length for this purpose. @@ -379,9 +379,8 @@ The regset data starts with struct user_za_header, containing: /proc/sys/abi/sme_default_vector_length Writing the text representation of an integer to this file sets the system - default vector length to the specified value, unless the value is greater - than the maximum vector length supported by the system in which case the - default vector length is set to that maximum. + default vector length to the specified value rounded to a supported value + using the same rules as for setting vector length via PR_SME_SET_VL. The result can be determined by reopening the file and reading its contents. diff --git a/Documentation/arch/arm64/sve.rst b/Documentation/arch/arm64/sve.rst index 0d9a426e9f85..8d8837fc39ec 100644 --- a/Documentation/arch/arm64/sve.rst +++ b/Documentation/arch/arm64/sve.rst @@ -117,11 +117,6 @@ the SVE instruction set architecture. * The SVE registers are not used to pass arguments to or receive results from any syscall. -* In practice the affected registers/bits will be preserved or will be replaced - with zeros on return from a syscall, but userspace should not make - assumptions about this. The kernel behaviour may vary on a case-by-case - basis. - * All other SVE state of a thread, including the currently configured vector length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector length (if any), is preserved across all syscalls, subject to the specific @@ -428,9 +423,8 @@ The regset data starts with struct user_sve_header, containing: /proc/sys/abi/sve_default_vector_length Writing the text representation of an integer to this file sets the system - default vector length to the specified value, unless the value is greater - than the maximum vector length supported by the system in which case the - default vector length is set to that maximum. + default vector length to the specified value rounded to a supported value + using the same rules as for setting vector length via PR_SVE_SET_VL. The result can be determined by reopening the file and reading its contents. diff --git a/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml new file mode 100644 index 000000000000..985b62990f80 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Coresight Performance Monitoring Unit Architecture + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + const: arm,coresight-pmu + + reg: + items: + - description: Register page 0 + - description: Register page 1, if the PMU implements the dual-page extension + minItems: 1 + + interrupts: + items: + - description: Overflow interrupt + + cpus: + description: If the PMU is associated with a particular CPU or subset of CPUs, + array of phandles to the appropriate CPU node(s) + + reg-io-width: + description: Granularity at which PMU register accesses are single-copy atomic + default: 4 + enum: [4, 8] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml new file mode 100644 index 000000000000..915c6b814026 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH8100 StarLink PMU + +maintainers: + - Ji Sheng Teoh <jisheng.teoh@starfivetech.com> + +description: + StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a + shared L3 memory system. The PMU support overflow interrupt, up to + 16 programmable 64bit event counters, and an independent 64bit cycle + counter. StarFive's JH8100 StarLink PMU is accessed via MMIO. + +properties: + compatible: + const: starfive,jh8100-starlink-pmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pmu@12900000 { + compatible = "starfive,jh8100-starlink-pmu"; + reg = <0x0 0x12900000 0x0 0x10000>; + interrupts = <34>; + }; + }; diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index 73203ba1e901..5c4fa9f5d1cd 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -15,6 +15,7 @@ support corresponds to ``S`` values in the ``MAINTAINERS`` file. ============= ================ ============================================== Architecture Level of support Constraints ============= ================ ============================================== +``arm64`` Maintained Little Endian only. ``loongarch`` Maintained - ``um`` Maintained ``x86_64`` only. ``x86`` Maintained ``x86_64`` only. |