diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/trace/ftrace.rst | 82 |
1 files changed, 66 insertions, 16 deletions
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index ff658e27d25b..3b5614b1d1a5 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -125,10 +125,13 @@ of ftrace. Here is a list of some of the key files: trace: This file holds the output of the trace in a human - readable format (described below). Note, tracing is temporarily - disabled when the file is open for reading. Once all readers - are closed, tracing is re-enabled. Opening this file for + readable format (described below). Opening this file for writing with the O_TRUNC flag clears the ring buffer content. + Note, this file is not a consumer. If tracing is off + (no tracer running, or tracing_on is zero), it will produce + the same output each time it is read. When tracing is on, + it may produce inconsistent results as it tries to read + the entire buffer without consuming it. trace_pipe: @@ -142,9 +145,7 @@ of ftrace. Here is a list of some of the key files: will not be read again with a sequential read. The "trace" file is static, and if the tracer is not adding more data, it will display the same - information every time it is read. Unlike the - "trace" file, opening this file for reading will not - temporarily disable tracing. + information every time it is read. trace_options: @@ -262,6 +263,20 @@ of ftrace. Here is a list of some of the key files: traced by the function tracer as well. This option will also cause PIDs of tasks that exit to be removed from the file. + set_ftrace_notrace_pid: + + Have the function tracer ignore threads whose PID are listed in + this file. + + If the "function-fork" option is set, then when a task whose + PID is listed in this file forks, the child's PID will + automatically be added to this file, and the child will not be + traced by the function tracer as well. This option will also + cause PIDs of tasks that exit to be removed from the file. + + If a PID is in both this file and "set_ftrace_pid", then this + file takes precedence, and the thread will not be traced. + set_event_pid: Have the events only trace a task with a PID listed in this file. @@ -273,6 +288,19 @@ of ftrace. Here is a list of some of the key files: cause the PIDs of tasks to be removed from this file when the task exits. + set_event_notrace_pid: + + Have the events not trace a task with a PID listed in this file. + Note, sched_switch and sched_wakeup will trace threads not listed + in this file, even if a thread's PID is in the file if the + sched_switch or sched_wakeup events also trace a thread that should + be traced. + + To have the PIDs of children of tasks with their PID in this file + added on fork, enable the "event-fork" option. That option will also + cause the PIDs of tasks to be removed from this file when the task + exits. + set_graph_function: Functions listed in this file will cause the function graph @@ -1125,6 +1153,12 @@ Here are the available options: the trace displays additional information about the latency, as described in "Latency trace format". + pause-on-trace + When set, opening the trace file for read, will pause + writing to the ring buffer (as if tracing_on was set to zero). + This simulates the original behavior of the trace file. + When the file is closed, tracing will be enabled again. + record-cmd When any event or tracer is enabled, a hook is enabled in the sched_switch trace point to fill comm cache @@ -1176,6 +1210,8 @@ Here are the available options: tasks fork. Also, when tasks with PIDs in set_event_pid exit, their PIDs will be removed from the file. + This affects PIDs listed in set_event_notrace_pid as well. + function-trace The latency tracers will enable function tracing if this option is enabled (default it is). When @@ -1190,6 +1226,8 @@ Here are the available options: set_ftrace_pid exit, their PIDs will be removed from the file. + This affects PIDs in set_ftrace_notrace_pid as well. + display-graph When set, the latency tracers (irqsoff, wakeup, etc) will use function graph tracing instead of function tracing. @@ -2126,6 +2164,8 @@ periodically make a CPU constantly busy with interrupts disabled. # cat trace # tracer: hwlat # + # entries-in-buffer/entries-written: 13/13 #P:8 + # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq @@ -2133,12 +2173,18 @@ periodically make a CPU constantly busy with interrupts disabled. # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | - <...>-3638 [001] d... 19452.055471: #1 inner/outer(us): 12/14 ts:1499801089.066141940 - <...>-3638 [003] d... 19454.071354: #2 inner/outer(us): 11/9 ts:1499801091.082164365 - <...>-3638 [002] dn.. 19461.126852: #3 inner/outer(us): 12/9 ts:1499801098.138150062 - <...>-3638 [001] d... 19488.340960: #4 inner/outer(us): 8/12 ts:1499801125.354139633 - <...>-3638 [003] d... 19494.388553: #5 inner/outer(us): 8/12 ts:1499801131.402150961 - <...>-3638 [003] d... 19501.283419: #6 inner/outer(us): 0/12 ts:1499801138.297435289 nmi-total:4 nmi-count:1 + <...>-1729 [001] d... 678.473449: #1 inner/outer(us): 11/12 ts:1581527483.343962693 count:6 + <...>-1729 [004] d... 689.556542: #2 inner/outer(us): 16/9 ts:1581527494.889008092 count:1 + <...>-1729 [005] d... 714.756290: #3 inner/outer(us): 16/16 ts:1581527519.678961629 count:5 + <...>-1729 [001] d... 718.788247: #4 inner/outer(us): 9/17 ts:1581527523.889012713 count:1 + <...>-1729 [002] d... 719.796341: #5 inner/outer(us): 13/9 ts:1581527524.912872606 count:1 + <...>-1729 [006] d... 844.787091: #6 inner/outer(us): 9/12 ts:1581527649.889048502 count:2 + <...>-1729 [003] d... 849.827033: #7 inner/outer(us): 18/9 ts:1581527654.889013793 count:1 + <...>-1729 [007] d... 853.859002: #8 inner/outer(us): 9/12 ts:1581527658.889065736 count:1 + <...>-1729 [001] d... 855.874978: #9 inner/outer(us): 9/11 ts:1581527660.861991877 count:1 + <...>-1729 [001] d... 863.938932: #10 inner/outer(us): 9/11 ts:1581527668.970010500 count:1 nmi-total:7 nmi-count:1 + <...>-1729 [007] d... 878.050780: #11 inner/outer(us): 9/12 ts:1581527683.385002600 count:1 nmi-total:5 nmi-count:1 + <...>-1729 [007] d... 886.114702: #12 inner/outer(us): 9/12 ts:1581527691.385001600 count:1 The above output is somewhat the same in the header. All events will have @@ -2148,7 +2194,7 @@ interrupts disabled 'd'. Under the FUNCTION title there is: This is the count of events recorded that were greater than the tracing_threshold (See below). - inner/outer(us): 12/14 + inner/outer(us): 11/11 This shows two numbers as "inner latency" and "outer latency". The test runs in a loop checking a timestamp twice. The latency detected within @@ -2156,11 +2202,15 @@ interrupts disabled 'd'. Under the FUNCTION title there is: after the previous timestamp and the next timestamp in the loop is the "outer latency". - ts:1499801089.066141940 + ts:1581527483.343962693 + + The absolute timestamp that the first latency was recorded in the window. + + count:6 - The absolute timestamp that the event happened. + The number of times a latency was detected during the window. - nmi-total:4 nmi-count:1 + nmi-total:7 nmi-count:1 On architectures that support it, if an NMI comes in during the test, the time spent in NMI is reported in "nmi-total" (in |