diff options
Diffstat (limited to 'Documentation')
34 files changed, 58 insertions, 63 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator index 42214b4ff14a..90596d8bb51c 100644 --- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator +++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator @@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls DDR Backup Mode must be explicitly enabled by the user, to invoke step 1. - See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt. + See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. Users: User space applications for embedded boards equipped with a BD9571MWV PMIC. diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index be66f1e8b547..7c331bfbe370 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -45,7 +45,7 @@ description: | The case where SH and SP are both 1 is likely not very interesting. maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt index 73470ecd1f12..ce91a9197697 100644 --- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt +++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt @@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node. firmware. On some SoCs, this firmware supports DFS and DVFS in addition to Adaptive Voltage Scaling. -[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml Node brcm,avs-cpu-data-mem diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml index 795a08ac9f12..2a17ec6fc97c 100644 --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml @@ -71,11 +71,6 @@ properties: - description: number of output lines for the green channel (G) - description: number of output lines for the blue channel (B) - arm,malidp-arqos-high-level: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - integer describing the ARQoS levels of DP500's QoS signaling - arm,malidp-arqos-value: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -113,7 +108,7 @@ examples: clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; + arm,malidp-arqos-value = <0xd000d000>; port { dp0_output: endpoint { diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index b41991eaa454..d3c3e4b07897 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7180 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 6e417d06fc79..f427eec3d3a4 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7280 maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 1a42491efdbc..2bb8896beffc 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SDM845 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 7095ec3c890d..880bfe930830 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI controller maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: "../dsi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 2d5a766d028f..716f921e3532 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 10nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 81dbee4803c0..1342d74ecfe0 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 14nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index b8de785ce815..9c1f9140c731 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 20nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 69eecaa64b18..3d8540a06fe2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 28nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 502bdda90235..76d40f7933dd 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Description of Qualcomm Display DSI PHY common dt properties maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | This defines the DSI PHY dt properties which are common for all diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt index 9c27ed694bbb..4a4df4ffc460 100644 --- a/Documentation/devicetree/bindings/hwmon/vexpress.txt +++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt @@ -9,7 +9,7 @@ Requires node properties: "arm,vexpress-power" "arm,vexpress-energy" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Optional node properties: diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index c7cfa6c2cd81..935d63d181d9 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -150,7 +150,6 @@ allOf: description: 5 memory controller channels and 1 for stream-id registers reg-names: - maxItems: 6 items: - const: sid - const: broadcast @@ -170,7 +169,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast @@ -202,7 +200,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml index 74a6867d3c82..edac14af101e 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> description: | MAX77714 is a Power Management IC with 4 buck regulators, 9 diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index aca1a4a8daea..3ee758886558 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -148,7 +148,6 @@ allOf: items: - description: Xenon IP registers - description: Armada 3700 SoC PHY PAD Voltage Control register - minItems: 2 marvell,pad-type: $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml index ddff9233b159..34dd1cc67124 100644 --- a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml @@ -55,7 +55,6 @@ properties: maxItems: 1 apple,sart: - maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle description: | Reference to the SART address filter. diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt index de6a706abcdb..35f03df00130 100644 --- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -9,7 +9,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the whole phy and one for the port - reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 60dc27834e1d..b078009ed509 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QMP USB3 DP PHY controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 0ab3dad3f121..d68ab49345b8 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QUSB2 phy controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251de0855..7a0e6a9854da 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Synopsys Femto High-Speed USB PHY V2 maintainers: - - Wesley Cheng <wcheng@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: | Qualcomm High-Speed USB PHY diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index cbcbd31e3ce8..939cb5b6ffea 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: ------------------- diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 4d820df24b89..6f17f3991640 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -32,31 +32,37 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, spi, wdt, + # For MT7620 SoC - ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, - uartf, uartlite, wdt, wled, + ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk, + uartf, uartlite, wled, # For MT7628 and MT7688 SoCs - gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, - pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, - wdt, wled_an, wled_kn, + pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2, + wled_an, wled_kn, ] function: description: The mux function to select. enum: [ + # common + gpio, i2c, refclk, spi, + # For MT7620 SoC - ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, - pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, - rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, + rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk, wdt rst, wled, # For MT7628 and MT7688 SoCs - antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + antenna, debug, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, - refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, ] diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 425401c54269..f602a5d6e13a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -33,32 +33,29 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite, + # For RT3050, RT3052 and RT3350 SoCs - i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, - uartlite, - - # For RT5350 SoC - i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + lna, pa ] function: description: The mux function to select. enum: [ + # common + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + # For RT3050, RT3052 and RT3350 SoCs - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, - pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, - pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, - uartlite, wdg_cs1, - - # For RT5350 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, - pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + lna, pa ] required: diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml index 675b9b26d233..f23dcc50793e 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX77976 Battery charger maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> description: | The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 12ed98c28aaa..dbe78cd4adba 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: The Qualcomm PMIC VBUS output regulator driver maintainers: - - Wesley Cheng <wcheng@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: | This regulator driver controls the VBUS output by the Qualcomm PMIC. This diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt index d775f72487aa..1c2e92c7831e 100644 --- a/Documentation/devicetree/bindings/regulator/vexpress.txt +++ b/Documentation/devicetree/bindings/regulator/vexpress.txt @@ -4,7 +4,7 @@ Versatile Express voltage regulators Requires node properties: - "compatible" value: "arm,vexpress-volt" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Required regulator properties: diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index bf73de0d5b4a..4aa368447b1e 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -13,7 +13,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the powerdown and softreset lines of the usb3 IP - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt - #address-cells, #size-cells : should be '1' if the device has sub-nodes diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 065c91d955ad..d6f2bdee20fc 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle + reset specifier pairs to the powerdown and softreset lines of the USB IP - reset-names : should be "power" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 44c998c16f85..1c735573abc0 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle to the powerdown and reset controller for the USB IP - reset-names : should be "power" and "softreset". -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e336fe2e03cc..749e1963ddbb 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6bb20b4554d7..0496773a3c4d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -143,6 +143,9 @@ patternProperties: description: ASPEED Technology Inc. "^asus,.*": description: AsusTek Computer Inc. + "^atheros,.*": + description: Qualcomm Atheros, Inc. (deprecated, use qca) + deprecated: true "^atlas,.*": description: Atlas Scientific LLC "^atmel,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index cbcf19f51411..ed6c1ca80dcc 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -64,7 +64,6 @@ if: then: properties: clocks: - minItems: 2 items: - description: High-frequency oscillator input, divided internally - description: Low-frequency oscillator input |