diff options
Diffstat (limited to 'Documentation')
55 files changed, 1419 insertions, 476 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices new file mode 100644 index 000000000000..43f78b88da28 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-devices @@ -0,0 +1,10 @@ +# Note: This documents additional properties of any device beyond what +# is documented in Documentation/sysfs-rules.txt + +What: /sys/devices/*/of_path +Date: February 2015 +Contact: Device Tree mailing list <devicetree@vger.kernel.org> +Description: + Any device associated with a device-tree node will have + an of_path symlink pointing to the corresponding device + node in /sys/firmware/devicetree/ diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer new file mode 100644 index 000000000000..6b0714e3c605 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-printer @@ -0,0 +1,9 @@ +What: /config/usb-gadget/gadget/functions/printer.name +Date: Apr 2015 +KernelVersion: 4.1 +Description: + The attributes: + + pnp_string - Data to be passed to the host in pnp string + q_len - Number of requests per endpoint + diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 9518006f6675..123881f62219 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -564,14 +564,14 @@ to be handled by platform and generic code, not individual drivers. 8. Vendor and device identifications ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -One is not required to add new device ids to include/linux/pci_ids.h. -Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids. +Do not add new device or vendor IDs to include/linux/pci_ids.h unless they +are shared across multiple drivers. You can add private definitions in +your driver if they're helpful, or just use plain hex constants. -PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary -hex numbers (vendor controlled) and normally used only in a single -location, the pci_device_id table. +The device IDs are arbitrary hex numbers (vendor controlled) and normally used +only in a single location, the pci_device_id table. -Please DO submit new vendor/device ids to pciids.sourceforge.net project. +Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/. diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index f51861bcb07b..e550c8b98139 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -1,129 +1,177 @@ APEI Error INJection ~~~~~~~~~~~~~~~~~~~~ -EINJ provides a hardware error injection mechanism -It is very useful for debugging and testing of other APEI and RAS features. +EINJ provides a hardware error injection mechanism. It is very useful +for debugging and testing APEI and RAS features in general. -To use EINJ, make sure the following are enabled in your kernel +You need to check whether your BIOS supports EINJ first. For that, look +for early boot messages similar to this one: + +ACPI: EINJ 0x000000007370A000 000150 (v01 INTEL 00000001 INTL 00000001) + +which shows that the BIOS is exposing an EINJ table - it is the +mechanism through which the injection is done. + +Alternatively, look in /sys/firmware/acpi/tables for an "EINJ" file, +which is a different representation of the same thing. + +It doesn't necessarily mean that EINJ is not supported if those above +don't exist: before you give up, go into BIOS setup to see if the BIOS +has an option to enable error injection. Look for something called WHEA +or similar. Often, you need to enable an ACPI5 support option prior, in +order to see the APEI,EINJ,... functionality supported and exposed by +the BIOS menu. + +To use EINJ, make sure the following are options enabled in your kernel configuration: CONFIG_DEBUG_FS CONFIG_ACPI_APEI CONFIG_ACPI_APEI_EINJ -The user interface of EINJ is debug file system, under the -directory apei/einj. The following files are provided. +The EINJ user interface is in <debugfs mount point>/apei/einj. + +The following files belong to it: - available_error_type - Reading this file returns the error injection capability of the - platform, that is, which error types are supported. The error type - definition is as follow, the left field is the error type value, the - right field is error description. - - 0x00000001 Processor Correctable - 0x00000002 Processor Uncorrectable non-fatal - 0x00000004 Processor Uncorrectable fatal - 0x00000008 Memory Correctable - 0x00000010 Memory Uncorrectable non-fatal - 0x00000020 Memory Uncorrectable fatal - 0x00000040 PCI Express Correctable - 0x00000080 PCI Express Uncorrectable fatal - 0x00000100 PCI Express Uncorrectable non-fatal - 0x00000200 Platform Correctable - 0x00000400 Platform Uncorrectable non-fatal - 0x00000800 Platform Uncorrectable fatal - - The format of file contents are as above, except there are only the - available error type lines. + + This file shows which error types are supported: + + Error Type Value Error Description + ================ ================= + 0x00000001 Processor Correctable + 0x00000002 Processor Uncorrectable non-fatal + 0x00000004 Processor Uncorrectable fatal + 0x00000008 Memory Correctable + 0x00000010 Memory Uncorrectable non-fatal + 0x00000020 Memory Uncorrectable fatal + 0x00000040 PCI Express Correctable + 0x00000080 PCI Express Uncorrectable fatal + 0x00000100 PCI Express Uncorrectable non-fatal + 0x00000200 Platform Correctable + 0x00000400 Platform Uncorrectable non-fatal + 0x00000800 Platform Uncorrectable fatal + + The format of the file contents are as above, except present are only + the available error types. - error_type - This file is used to set the error type value. The error type value - is defined in "available_error_type" description. + + Set the value of the error type being injected. Possible error types + are defined in the file available_error_type above. - error_inject - Write any integer to this file to trigger the error - injection. Before this, please specify all necessary error - parameters. + + Write any integer to this file to trigger the error injection. Make + sure you have specified all necessary error parameters, i.e. this + write should be the last step when injecting errors. - flags - Present for kernel version 3.13 and above. Used to specify which - of param{1..4} are valid and should be used by BIOS during injection. - Value is a bitmask as specified in ACPI5.0 spec for the + + Present for kernel versions 3.13 and above. Used to specify which + of param{1..4} are valid and should be used by the firmware during + injection. Value is a bitmask as specified in ACPI5.0 spec for the SET_ERROR_TYPE_WITH_ADDRESS data structure: - Bit 0 - Processor APIC field valid (see param3 below) - Bit 1 - Memory address and mask valid (param1 and param2) - Bit 2 - PCIe (seg,bus,dev,fn) valid (param4 below) - If set to zero, legacy behaviour is used where the type of injection - specifies just one bit set, and param1 is multiplexed. + + Bit 0 - Processor APIC field valid (see param3 below). + Bit 1 - Memory address and mask valid (param1 and param2). + Bit 2 - PCIe (seg,bus,dev,fn) valid (see param4 below). + + If set to zero, legacy behavior is mimicked where the type of + injection specifies just one bit set, and param1 is multiplexed. - param1 - This file is used to set the first error parameter value. Effect of - parameter depends on error_type specified. For example, if error - type is memory related type, the param1 should be a valid physical - memory address. [Unless "flag" is set - see above] + + This file is used to set the first error parameter value. Its effect + depends on the error type specified in error_type. For example, if + error type is memory related type, the param1 should be a valid + physical memory address. [Unless "flag" is set - see above] - param2 - This file is used to set the second error parameter value. Effect of - parameter depends on error_type specified. For example, if error - type is memory related type, the param2 should be a physical memory - address mask. Linux requires page or narrower granularity, say, - 0xfffffffffffff000. + + Same use as param1 above. For example, if error type is of memory + related type, then param2 should be a physical memory address mask. + Linux requires page or narrower granularity, say, 0xfffffffffffff000. - param3 - Used when the 0x1 bit is set in "flag" to specify the APIC id + + Used when the 0x1 bit is set in "flags" to specify the APIC id - param4 - Used when the 0x4 bit is set in "flag" to specify target PCIe device + Used when the 0x4 bit is set in "flags" to specify target PCIe device - notrigger - The EINJ mechanism is a two step process. First inject the error, then - perform some actions to trigger it. Setting "notrigger" to 1 skips the - trigger phase, which *may* allow the user to cause the error in some other - context by a simple access to the cpu, memory location, or device that is - the target of the error injection. Whether this actually works depends - on what operations the BIOS actually includes in the trigger phase. - -BIOS versions based in the ACPI 4.0 specification have limited options -to control where the errors are injected. Your BIOS may support an -extension (enabled with the param_extension=1 module parameter, or -boot command line einj.param_extension=1). This allows the address -and mask for memory injections to be specified by the param1 and -param2 files in apei/einj. - -BIOS versions using the ACPI 5.0 specification have more control over -the target of the injection. For processor related errors (type 0x1, -0x2 and 0x4) the APICID of the target should be provided using the -param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20) -the address is set using param1 with a mask in param2 (0x0 is equivalent -to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the -segment, bus, device and function are specified using param1: + + The error injection mechanism is a two-step process. First inject the + error, then perform some actions to trigger it. Setting "notrigger" + to 1 skips the trigger phase, which *may* allow the user to cause the + error in some other context by a simple access to the CPU, memory + location, or device that is the target of the error injection. Whether + this actually works depends on what operations the BIOS actually + includes in the trigger phase. + +BIOS versions based on the ACPI 4.0 specification have limited options +in controlling where the errors are injected. Your BIOS may support an +extension (enabled with the param_extension=1 module parameter, or boot +command line einj.param_extension=1). This allows the address and mask +for memory injections to be specified by the param1 and param2 files in +apei/einj. + +BIOS versions based on the ACPI 5.0 specification have more control over +the target of the injection. For processor-related errors (type 0x1, 0x2 +and 0x4), you can set flags to 0x3 (param3 for bit 0, and param1 and +param2 for bit 1) so that you have more information added to the error +signature being injected. The actual data passed is this: + + memory_address = param1; + memory_address_range = param2; + apicid = param3; + pcie_sbdf = param4; + +For memory errors (type 0x8, 0x10 and 0x20) the address is set using +param1 with a mask in param2 (0x0 is equivalent to all ones). For PCI +express errors (type 0x40, 0x80 and 0x100) the segment, bus, device and +function are specified using param1: 31 24 23 16 15 11 10 8 7 0 +-------------------------------------------------+ | segment | bus | device | function | reserved | +-------------------------------------------------+ -An ACPI 5.0 BIOS may also allow vendor specific errors to be injected. +Anyway, you get the idea, if there's doubt just take a look at the code +in drivers/acpi/apei/einj.c. + +An ACPI 5.0 BIOS may also allow vendor-specific errors to be injected. In this case a file named vendor will contain identifying information from the BIOS that hopefully will allow an application wishing to use -the vendor specific extension to tell that they are running on a BIOS +the vendor-specific extension to tell that they are running on a BIOS that supports it. All vendor extensions have the 0x80000000 bit set in error_type. A file vendor_flags controls the interpretation of param1 and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor documentation for details (and expect changes to this API if vendors creativity in using this feature expands beyond our expectations). -Example: + +An error injection example: + # cd /sys/kernel/debug/apei/einj # cat available_error_type # See which errors can be injected 0x00000002 Processor Uncorrectable non-fatal 0x00000008 Memory Correctable 0x00000010 Memory Uncorrectable non-fatal # echo 0x12345000 > param1 # Set memory address for injection -# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page +# echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page # echo 0x8 > error_type # Choose correctable memory error # echo 1 > error_inject # Inject now +You should see something like this in dmesg: + +[22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR +[22715.834759] EDAC sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 +[22715.834759] EDAC sbridge MC3: TSC 0 +[22715.834759] EDAC sbridge MC3: ADDR 12345000 EDAC sbridge MC3: MISC 144780c86 +[22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 +[22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) For more information about EINJ, please refer to ACPI specification version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index f2235a162529..fdf7dff3f607 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -392,8 +392,10 @@ Put simply, it costs less to balance between two smaller sched domains than one big one, but doing so means that overloads in one of the two domains won't be load balanced to the other one. -By default, there is one sched domain covering all CPUs, except those -marked isolated using the kernel boot time "isolcpus=" argument. +By default, there is one sched domain covering all CPUs, including those +marked isolated using the kernel boot time "isolcpus=" argument. However, +the isolated CPUs will not participate in load balancing, and will not +have tasks running on them unless explicitly assigned. This default load balancing across all CPUs is not well suited for the following two situations: @@ -465,6 +467,10 @@ such partially load balanced cpusets, as they may be artificially constrained to some subset of the CPUs allowed to them, for lack of load balancing to the other CPUs. +CPUs in "cpuset.isolcpus" were excluded from load balancing by the +isolcpus= kernel boot option, and will never be load balanced regardless +of the value of "cpuset.sched_load_balance" in any cpuset. + 1.7.1 sched_load_balance implementation details. ------------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt new file mode 100644 index 000000000000..44aa3c451ccf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt @@ -0,0 +1,14 @@ +Freescale Vybrid Miscellaneous System Control - CPU Configuration + +The MSCM IP contains multiple sub modules, this binding describes the first +block of registers which contains CPU configuration information. + +Required properties: +- compatible: "fsl,vf610-mscm-cpucfg", "syscon" +- reg: the register range of the MSCM CPU configuration registers + +Example: + mscm_cpucfg: cpucfg@40001000 { + compatible = "fsl,vf610-mscm-cpucfg", "syscon"; + reg = <0x40001000 0x800>; + } diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt new file mode 100644 index 000000000000..669808b2af49 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt @@ -0,0 +1,33 @@ +Freescale Vybrid Miscellaneous System Control - Interrupt Router + +The MSCM IP contains multiple sub modules, this binding describes the second +block of registers which control the interrupt router. The interrupt router +allows to configure the recipient of each peripheral interrupt. Furthermore +it controls the directed processor interrupts. The module is available in all +Vybrid SoC's but is only really useful in dual core configurations (VF6xx +which comes with a Cortex-A5/Cortex-M4 combination). + +Required properties: +- compatible: "fsl,vf610-mscm-ir" +- reg: the register range of the MSCM Interrupt Router +- fsl,cpucfg: The handle to the MSCM CPU configuration node, required + to get the current CPU ID +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: Two cells, interrupt number and cells. + The hardware interrupt number according to interrupt + assignment of the interrupt router is required. + Flags get passed only when using GIC as parent. Flags + encoding as documented by the GIC bindings. +- interrupt-parent: Should be the phandle for the interrupt controller of + the CPU the device tree is intended to be used on. This + is either the node of the GIC or NVIC controller. + +Example: + mscm_ir: interrupt-controller@40001800 { + compatible = "fsl,vf610-mscm-ir"; + reg = <0x40001800 0x400>; + fsl,cpucfg = <&mscm_cpucfg>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + } diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index c97484b73e72..1e0d21201d3a 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -56,11 +56,6 @@ Optional regions, used when the GIC doesn't have banked registers. The offset is cpu-offset * cpu-nr. -- arm,routable-irqs : Total number of gic irq inputs which are not directly - connected from the peripherals, but are routed dynamically - by a crossbar/multiplexer preceding the GIC. The GIC irq - input line is assigned dynamically when the corresponding - peripheral's crossbar line is mapped. Example: intc: interrupt-controller@fff11000 { @@ -68,7 +63,6 @@ Example: #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - arm,routable-irqs = <160>; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index 4139db353d0a..a9b28d74d902 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -9,7 +9,9 @@ inputs. Required properties: - compatible : Should be "ti,irq-crossbar" - reg: Base address and the size of the crossbar registers. -- ti,max-irqs: Total number of irqs available at the interrupt controller. +- interrupt-controller: indicates that this block is an interrupt controller. +- interrupt-parent: the interrupt controller this block is connected to. +- ti,max-irqs: Total number of irqs available at the parent interrupt controller. - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed. - ti,reg-size: Size of a individual register in bytes. Every individual register is assumed to be of same size. Valid sizes are 1, 2, 4. @@ -27,13 +29,13 @@ Optional properties: when the interrupt controller irq is unused (when not provided, default is 0) Examples: - crossbar_mpu: @4a020000 { + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; ti,max-irqs = <160>; ti,max-crossbar-sources = <400>; ti,reg-size = <2>; - ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132>; ti,irqs-skip = <10 133 139 140>; }; @@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details. An interrupt consumer on an SoC using crossbar will use: interrupts = <GIC_SPI request_number interrupt_level> -When the request number is between 0 to that described by -"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the -request_number is greater than "ti,max-crossbar-sources", then it is mapped as a -quirky hardware mapping direct to GIC. Example: device_x@0x4a023000 { @@ -55,9 +53,3 @@ Example: interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; ... }; - - device_y@0x4a033000 { - /* Direct mapped GIC SPI 1 used */ - interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>; - ... - }; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 67b211381f2b..2d6356d8daf4 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -29,10 +29,27 @@ Properties: - clocks : list of phandles and specifiers to all input clocks listed in clock-names property. +Optional properties: + +Some PMUs are capable of behaving as an interrupt controller (mostly +to wake up a suspended PMU). In which case, they can have the +following properties: + +- interrupt-controller: indicate that said PMU is an interrupt controller + +- #interrupt-cells: must be identical to the that of the parent interrupt + controller. + +- interrupt-parent: a phandle indicating which interrupt controller + this PMU signals interrupts to. + Example : pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5250-pmu", "syscon"; reg = <0x10040000 0x5000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; #clock-cells = <1>; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt index 0574a77a0b9f..e1d01df8e3c1 100644 --- a/Documentation/devicetree/bindings/ata/ahci-st.txt +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt @@ -3,29 +3,48 @@ STMicroelectronics STi SATA controller This binding describes a SATA device. Required properties: - - compatible : Must be "st,sti-ahci" + - compatible : Must be "st,ahci" - reg : Physical base addresses and length of register sets - interrupts : Interrupt associated with the SATA device - interrupt-names : Associated name must be; "hostc" - - resets : The power-down and soft-reset lines of SATA IP - - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" - clocks : The phandle for the clock - clock-names : Associated name must be; "ahci_clk" - - phys : The phandle for the PHY device + - phys : The phandle for the PHY port - phy-names : Associated name must be; "ahci_phy" +Optional properties: + - resets : The power-down, soft-reset and power-reset lines of SATA IP + - reset-names : Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst" + Example: + /* Example for stih416 */ sata0: sata@fe380000 { - compatible = "st,sti-ahci"; - reg = <0xfe380000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; - interrupt-names = "hostc"; - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; - phy-names = "ahci_phy"; - resets = <&powerdown STIH416_SATA0_POWERDOWN>, + compatible = "st,ahci"; + reg = <0xfe380000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + phys = <&phy_port0 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; - reset-names = "pwr-dwn", "sw-rst"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ahci_clk"; + reset-names = "pwr-dwn", "sw-rst"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; + clock-names = "ahci_clk"; + }; + + /* Example for stih407 family silicon */ + sata0: sata@9b20000 { + compatible = "st,ahci"; + reg = <0x9b20000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + phys = <&phy_port0 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + resets = <&powerdown STIH407_SATA0_POWERDOWN>, + <&softreset STIH407_SATA0_SOFTRESET>, + <&softreset STIH407_SATA0_PWR_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst", "pwr-rst"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + clock-names = "ahci_clk"; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt index 2dd457a3469a..439a7430fc68 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -2,15 +2,20 @@ Bindings for fan connected to GPIO lines Required properties: - compatible : "gpio-fan" + +Optional properties: - gpios: Specifies the pins that map to bits in the control value, ordered MSB-->LSB. - gpio-fan,speed-map: A mapping of possible fan RPM speeds and the control value that should be set to achieve them. This array must have the RPM values in ascending order. - -Optional properties: - alarm-gpios: This pin going active indicates something is wrong with the fan, and a udev event will be fired. +- cooling-cells: If used as a cooling device, must be <2> + Also see: Documentation/devicetree/bindings/thermal/thermal.txt + min and max states are derived from the speed-map of the fan. + +Note: At least one the "gpios" or "alarm-gpios" properties must be set. Examples: @@ -23,3 +28,13 @@ Examples: 6000 2>; alarm-gpios = <&gpio1 15 1>; }; + gpio_fan_cool: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; diff --git a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt new file mode 100644 index 000000000000..c07228da92ac --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt @@ -0,0 +1,16 @@ +Dialog Semiconductor DA9150 IIO GPADC bindings + +Required properties: +- compatible: "dlg,da9150-gpadc" for DA9150 IIO GPADC +- #io-channel-cells: Should be set to <1> + (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info) + +For further information on GPADC channels, see device datasheet. + + +Example: + + gpadc: da9150-gpadc { + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt new file mode 100644 index 000000000000..1099fe0788fa --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt @@ -0,0 +1,43 @@ +NVIDIA Legacy Interrupt Controller + +All Tegra SoCs contain a legacy interrupt controller that routes +interrupts to the GIC, and also serves as a wakeup source. It is also +referred to as "ictlr", hence the name of the binding. + +The HW block exposes a number of interrupt controllers, each +implementing a set of 32 interrupts. + +Required properties: + +- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on + subsequent SoCs remained backwards-compatible with Tegra30, so on + Tegra generations later than Tegra30 the compatible value should + include "nvidia,tegra30-ictlr". +- reg : Specifies base physical address and size of the registers. + Each controller must be described separately (Tegra20 has 4 of them, + whereas Tegra30 and later have 5" +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : a phandle to the GIC these interrupts are routed + to. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs + are explicitly forbidden. + +Example: + + ictlr: interrupt-controller@60004000 { + compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr"; + reg = <0x60004000 64>, + <0x60004100 64>, + <0x60004200 64>, + <0x60004300 64>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 1a88e62228e5..63633bdea7e4 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -4,7 +4,7 @@ Required properties: - compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback. Examples with soctypes are: - - "renesas,irqc-r8a73a4" (R-Mobile AP6) + - "renesas,irqc-r8a73a4" (R-Mobile APE6) - "renesas,irqc-r8a7790" (R-Car H2) - "renesas,irqc-r8a7791" (R-Car M2-W) - "renesas,irqc-r8a7792" (R-Car V2H) @@ -12,6 +12,7 @@ Required properties: - "renesas,irqc-r8a7794" (R-Car E2) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory +- clocks: Must contain a reference to the functional clock. Optional properties: @@ -29,4 +30,5 @@ Example: <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7790_CLK_IRQC>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt new file mode 100644 index 000000000000..ced6014061a3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt @@ -0,0 +1,35 @@ +STMicroelectronics STi System Configuration Controlled IRQs +----------------------------------------------------------- + +On STi based systems; External, CTI (Core Sight), PMU (Performance Management), +and PL310 L2 Cache IRQs are controlled using System Configuration registers. +This driver is used to unmask them prior to use. + +Required properties: +- compatible : Should be set to one of: + "st,stih415-irq-syscfg" + "st,stih416-irq-syscfg" + "st,stih407-irq-syscfg" + "st,stid127-irq-syscfg" +- st,syscfg : Phandle to Cortex-A9 IRQ system config registers +- st,irq-device : Array of IRQs to enable - should be 2 in length +- st,fiq-device : Array of FIQs to enable - should be 2 in length + +Optional properties: +- st,invert-ext : External IRQs can be inverted at will. This property inverts + these IRQs using bitwise logic. A number of defines have been + provided for convenience: + ST_IRQ_SYSCFG_EXT_1_INV + ST_IRQ_SYSCFG_EXT_2_INV + ST_IRQ_SYSCFG_EXT_3_INV +Example: + +irq-syscfg { + compatible = "st,stih416-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu new file mode 100644 index 000000000000..43effa0a4fe7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu @@ -0,0 +1,33 @@ +TI OMAP4 Wake-up Generator + +All TI OMAP4/5 (and their derivatives) an interrupt controller that +routes interrupts to the GIC, and also serves as a wakeup source. It +is also referred to as "WUGEN-MPU", hence the name of the binding. + +Reguired properties: + +- compatible : should contain at least "ti,omap4-wugen-mpu" or + "ti,omap5-wugen-mpu" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : a phandle to the GIC these interrupts are routed + to. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs + are explicitly forbiden. + +Example: + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt new file mode 100644 index 000000000000..72cc9cc95880 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -0,0 +1,23 @@ +Broadcom IPROC SDHCI controller + +This file documents differences between the core properties described +by mmc.txt and the properties that represent the IPROC SDHCI controller. + +Required properties: +- compatible : Should be "brcm,sdhci-iproc-cygnus". +- clocks : The clock feeding the SDHCI controller. + +Optional properties: + - sdhci,auto-cmd12: specifies that controller should use auto CMD12. + +Example: + +sdhci0: sdhci@0x18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + no-1-8-v; +}; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index ee4fc0576c7d..aad98442788b 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -36,6 +36,8 @@ Required Properties: in transmit mode and CIU clock phase shift value in receive mode for double data rate mode operation. Refer notes below for the order of the cells and the valid values. +* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase + shift value for hs400 mode operation. Notes for the sdr-timing and ddr-timing values: @@ -50,6 +52,9 @@ Required Properties: - if CIU clock divider value is 0 (that is divide by 1), both tx and rx phase shift clocks should be 0. +* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode + (Latency value for delay line in Read path) + Required properties for a slot (Deprecated - Recommend to use one slot per host): * gpios: specifies a list of gpios used for command, clock and data bus. The @@ -82,5 +87,7 @@ Example: samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 9046ba06c47a..415c5575cbf7 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -17,6 +17,10 @@ Optional properties: to select a proper data sampling window in case the clock quality is not good due to signal path is too long on the board. Please refer to eSDHC/uSDHC chapter, DLL (Delay Line) section in RM for details. +- voltage-ranges : Specify the voltage range in case there are software + transparent level shifters on the outputs of the controller. Two cells are + required, first cell specifies minimum slot voltage (mV), second cell + specifies maximum slot voltage (mV). Several ranges could be specified. Examples: diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt new file mode 100644 index 000000000000..a70fcd65b9ea --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt @@ -0,0 +1,31 @@ +mmc-card / eMMC bindings +------------------------ + +This documents describes the devicetree bindings for a mmc-host controller +child node describing a mmc-card / an eMMC, see "Use of Function subnodes" +in mmc.txt + +Required properties: +-compatible : Must be "mmc-card" +-reg : Must be <0> + +Optional properties: +-broken-hpi : Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used + +Example: + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 7527db447a35..18d950df2749 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -5,20 +5,62 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-st driver. Required properties: -- compatible : Must be "st,sdhci" -- clock-names : Should be "mmc" - See: Documentation/devicetree/bindings/resource-names.txt -- clocks : Phandle of the clock used by the sdhci controler - See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- compatible: Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407" + to set the internal glue logic used for configuring the MMC + subsystem (mmcss) inside the FlashSS (available in STiH407 SoC + family). + +- clock-names: Should be "mmc". + See: Documentation/devicetree/bindings/resource-names.txt +- clocks: Phandle to the clock. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +- interrupts: One mmc interrupt should be described here. +- interrupt-names: Should be "mmcirq". + +- pinctrl-names: A pinctrl state names "default" must be defined. +- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + +- reg: This must provide the host controller base address and it can also + contain the FlashSS Top register for TX/RX delay used by the driver + to configure DLL inside the flashSS, if so reg-names must also be + specified. Optional properties: -- non-removable: non-removable slot - See: Documentation/devicetree/bindings/mmc/mmc.txt -- bus-width: Number of data lines - See: Documentation/devicetree/bindings/mmc/mmc.txt +- reg-names: Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional + for eMMC on stih407 family silicon to configure DLL inside FlashSS. + +- non-removable: Non-removable slot. Also used for configuring mmcss in STiH407 SoC + family. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- bus-width: Number of data lines. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for + configuring the CCONFIG3 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- resets: Phandle and reset specifier pair to softreset line of HC IP. + See: Documentation/devicetree/bindings/reset/reset.txt + +- vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd + supply in eMMC/SD specs. + +- sd-uhs--sdr50: To enable the SDR50 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- sd-uhs-sdr104: To enable the SDR104 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- sd-uhs-ddr50: To enable the DDR50 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. Example: +/* Example stih416e eMMC configuration */ + mmc0: sdhci@fe81e000 { compatible = "st,sdhci"; status = "disabled"; @@ -29,5 +71,43 @@ mmc0: sdhci@fe81e000 { pinctrl-0 = <&pinctrl_mmc0>; clock-names = "mmc"; clocks = <&clk_s_a1_ls 1>; - bus-width = <8> + bus-width = <8> + +/* Example SD stih407 family configuration */ + +mmc1: sdhci@09080000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09080000 0x7ff>; + reg-names = "mmc"; + interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + resets = <&softreset STIH407_MMC1_SOFTRESET>; + bus-width = <4>; +}; + +/* Example eMMC stih407 family configuration */ + +mmc0: sdhci@09060000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09060000 0x7ff>, <0x9061008 0x20>; + reg-names = "mmc", "top-mmc-delay"; + interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + vqmmc-supply = <&vmmc_reg>; + max-frequency = <200000000>; + bus-width = <8>; + non-removable; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; }; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt new file mode 100644 index 000000000000..f7ce50e38ed4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -0,0 +1,63 @@ +* Broadcom iProc PCIe controller with the platform bus interface + +Required properties: +- compatible: Must be "brcm,iproc-pcie" +- reg: base address and length of the PCIe controller I/O register space +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map, standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers +- linux,pci-domain: PCI domain ID. Should be unique for each host controller +- bus-range: PCI bus numbers covered +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions + +Optional properties: +- phys: phandle of the PCIe PHY device +- phy-names: must be "pcie-phy" + +Example: + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/dm816x-phy.txt b/Documentation/devicetree/bindings/phy/dm816x-phy.txt new file mode 100644 index 000000000000..2fe3d11d063d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/dm816x-phy.txt @@ -0,0 +1,24 @@ +Device tree binding documentation for am816x USB PHY +========================= + +Required properties: +- compatible : should be "ti,dm816x-usb-phy" +- reg : offset and length of the PHY register set. +- reg-names : name for the phy registers +- clocks : phandle to the clock +- clock-names : name of the clock +- syscon: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1 +- syscon: phandle for the syscon node to access misc registers + +Example: + +usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt index 9802d5d911aa..8772900e056a 100644 --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt @@ -20,8 +20,8 @@ Required nodes : A sub-node is required for each channel the controller Required properties (port (child) node): - #phy-cells : Should be 1 (See second example) Cell after port phandle is device type from: - - MIPHY_TYPE_SATA - - MIPHY_TYPE_PCI + - PHY_TYPE_SATA + - PHY_TYPE_PCI - reg : Address and length of register sets for each device in "reg-names" - reg-names : The names of the register addresses corresponding to the @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type. Example: -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> sata0: sata@fe380000 { ... - phys = <&phy_port0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; ... }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 91e38cfe1f8f..60c6f2a633e0 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -128,6 +128,7 @@ Required properties: - compatible : Should be set to one of the following supported values: - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC, - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC. + - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC. - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC. - reg : Register offset and length of USB DRD PHY register set; - clocks: Clock IDs array as required by the controller @@ -139,7 +140,7 @@ Required properties: PHY operations, associated by phy name. It is used to determine bit values for clock settings register. For Exynos5420 this is given as 'sclk_usbphy30' in CMU. - - optional clocks: Exynos7 SoC has now following additional + - optional clocks: Exynos5433 & Exynos7 SoC has now following additional gate clocks available: - phy_pipe: for PIPE3 phy - phy_utmi: for UTMI+ phy diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt new file mode 100644 index 000000000000..1cca85c709d1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -0,0 +1,38 @@ +Allwinner sun9i USB PHY +----------------------- + +Required properties: +- compatible : should be one of + * allwinner,sun9i-a80-usb-phy +- reg : a list of offset + length pairs +- #phy-cells : from the generic phy bindings, must be 0 +- phy_type : "hsic" for HSIC usage; + other values or absence of this property indicates normal USB +- clocks : phandle + clock specifier for the phy clocks +- clock-names : depending on the "phy_type" property, + * "phy" for normal USB + * "hsic_480M", "hsic_12M" for HSIC +- resets : a list of phandle + reset specifier pairs +- reset-names : depending on the "phy_type" property, + * "phy" for normal USB + * "hsic" for HSIC + +Optional Properties: +- phy-supply : from the generic phy bindings, a phandle to a regulator that + provides power to VBUS. + +It is recommended to list all clocks and resets available. +The driver will only use those matching the phy_type. + +Example: + usbphy1: phy@00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/power/da9150-charger.txt b/Documentation/devicetree/bindings/power/da9150-charger.txt new file mode 100644 index 000000000000..f3906663c454 --- /dev/null +++ b/Documentation/devicetree/bindings/power/da9150-charger.txt @@ -0,0 +1,26 @@ +Dialog Semiconductor DA9150 Charger Power Supply bindings + +Required properties: +- compatible: "dlg,da9150-charger" for DA9150 Charger Power Supply + +Optional properties: +- io-channels: List of phandle and IIO specifier pairs +- io-channel-names: List of channel names used by charger + ["CHAN_IBUS", "CHAN_VBUS", "CHAN_TJUNC", "CHAN_VBAT"] + (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info) + + +Example: + + da9150-charger { + compatible = "dlg,da9150-charger"; + + io-channels = <&gpadc 0>, + <&gpadc 2>, + <&gpadc 8>, + <&gpadc 5>; + io-channel-names = "CHAN_IBUS", + "CHAN_VBUS", + "CHAN_TJUNC", + "CHAN_VBAT"; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt new file mode 100644 index 000000000000..1e2546f8b08a --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt @@ -0,0 +1,23 @@ +Generic SYSCON mapped register poweroff driver + +This is a generic poweroff driver using syscon to map the poweroff register. +The poweroff is generally performed with a write to the poweroff register +defined by the register map pointed by syscon reference plus the offset +with the mask defined in the poweroff node. + +Required properties: +- compatible: should contain "syscon-poweroff" +- regmap: this is phandle to the register map node +- offset: offset in the register map for the poweroff register (in bytes) +- mask: the poweroff value written to the poweroff register (32 bit access) + +Default will be little endian mode, 32 bit access only. + +Examples: + + poweroff { + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; + }; diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index dad6358074ac..e91485d11241 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -2,13 +2,35 @@ ACT88xx regulators ------------------- Required properties: -- compatible: "active-semi,act8846" or "active-semi,act8865" +- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" - reg: I2C slave address Optional properties: - system-power-controller: Telling whether or not this pmic is controlling the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +Optional input supply properties: +- for act8600: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 + SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. +- for act8846: + - vp1-supply: The input supply for REG1 + - vp2-supply: The input supply for REG2 + - vp3-supply: The input supply for REG3 + - vp4-supply: The input supply for REG4 + - inl1-supply: The input supply for REG5, REG6 and REG7 + - inl2-supply: The input supply for REG8 and LDO_REG9 + - inl3-supply: The input supply for REG10, REG11 and REG12 +- for act8865: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 + - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 + Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: @@ -16,6 +38,9 @@ The valid names for regulators are: REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 - for act8865: DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. + - for act8600: + DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, + LDO_REG8, LDO_REG9, LDO_REG10, Example: -------- diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index aad527b357a0..523341a0e113 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -2,11 +2,21 @@ (CSPI/eCSPI) for i.MX Required properties: -- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi" +- compatible : + - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1 + - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21 + - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27 + - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31 + - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 + - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - fsl,spi-num-chipselects : Contains the number of the chipselect - cs-gpios : Specifies the gpio pins to be used for chipselects. +- clocks : Clock specifiers for both ipg and per clocks. +- clock-names : Clock names should include both "ipg" and "per" +See the clock consumer binding, + Documentation/devicetree/bindings/clock/clock-bindings.txt - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index e2c88df2cc15..5c090771c016 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -33,6 +33,11 @@ Optional properties: nodes. If unspecified, a single SPI device without a chip select can be used. +- dmas: Two DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt +- dma-names: Names for the dma channels, if present. There must be at + least one channel named "tx" for transmit and named "rx" for + receive. SPI slave nodes must be children of the SPI master node and can contain properties described in Documentation/devicetree/bindings/spi/spi-bus.txt @@ -51,6 +56,9 @@ Example: clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; pinctrl-0 = <&spi8_default>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index cbbe16ed3874..70af78a9185e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -16,6 +16,12 @@ Optional property: in big endian mode, otherwise in native mode(same with CPU), for more detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. +Optional SPI slave node properties: +- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip + select and the start of clock signal, at the start of a transfer. +- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock + signal and deactivating chip select, at the end of a transfer. + Example: dspi0@4002c000 { @@ -43,6 +49,8 @@ dspi0@4002c000 { reg = <0>; linux,modalias = "m25p80"; modal = "at26df081a"; + fsl,spi-cs-sck-delay = <100>; + fsl,spi-sck-cs-delay = <50>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index c7dd50fb8eb2..e02fbf18c82c 100644 --- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -14,6 +14,7 @@ Required properties: - dma-names: Must include the following entries: - rx - tx +- cs-gpios: Must specify the GPIOs used for chipselect lines. - #address-cells: Must be 1. - #size-cells: Must be 0. diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 467dec441c62..0c491bda4c65 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -24,6 +24,9 @@ Optional Properties: - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. +- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling + Rx data (may need to be fine tuned for high capacitance lines). + No delay (0) by default. Example: @@ -33,6 +36,7 @@ Example: reg = <0xff110000 0x1000>; dmas = <&pdma1 11>, <&pdma1 12>; dma-names = "tx", "rx"; + rx-sample-delay-ns = <10>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 43404b197933..332e625f6ed0 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -4,7 +4,7 @@ Required properties: - compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal" as fallback. Examples with soctypes are: - - "renesas,thermal-r8a73a4" (R-Mobile AP6) + - "renesas,thermal-r8a73a4" (R-Mobile APE6) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - "renesas,thermal-r8a7791" (R-Car M2-W) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index cd7f0454e13a..5cc364309edb 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -14,6 +14,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 61b045b6d50e..dc2a18f0b3a1 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -15,7 +15,10 @@ Optional properties: - phys: phandle + phy specifier pair - phy-names: must be "usb" - dmas: Must contain a list of references to DMA specifiers. - - dma-names : Must contain a list of DMA names, "tx" or "rx". + - dma-names : Must contain a list of DMA names: + - tx0 ... tx<n> + - rx0 ... rx<n> + - This <n> means DnFIFO in USBHS module. Example: usbhs: usb@e6590000 { diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index c101a4b17131..3539d4e7d23e 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 + "fsl,imx6sx-usbmisc" for imx6sx - reg: Should contain registers location and length Examples: diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index fe80e9adebfa..e87294878334 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'it8603' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8620E + Prefix: 'it8620' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8705F Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -42,6 +46,10 @@ Supported chips: Prefix: 'it8772' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8781F + Prefix: 'it8781' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8782F Prefix: 'it8782' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -50,6 +58,14 @@ Supported chips: Prefix: 'it8783' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8786E + Prefix: 'it8786' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8790E + Prefix: 'it8790' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -94,9 +110,10 @@ motherboard models. Description ----------- -This driver implements support for the IT8603E, IT8623E, IT8705F, IT8712F, -IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, -IT8772E, IT8782F, IT8783E/F, and SiS950 chips. +This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F, +IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, +IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950 +chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -120,11 +137,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8782F, IT8783E/F, and late -IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to -3. This is better (no more fan clock divider mess) but not compatible with the -older chips and revisions. The 16-bit tachometer mode is enabled by the driver -when one of the above chips is detected. +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F, +and late IT8712F and IT8705F also have optional 16-bit tachometer counters +for fans 1 to 3. This is better (no more fan clock divider mess) but not +compatible with the older chips and revisions. The 16-bit tachometer mode +is enabled by the driver when one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F @@ -134,8 +151,13 @@ The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F, until a datasheet becomes available (hopefully.) The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to -IT8728F. It only supports 16-bit fan mode, the full speed mode of the -fan is not supported (value 0 of pwmX_enable). +IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode +of the fan is not supported (value 0 of pwmX_enable). + +The IT8620E is another custom design, hardware monitoring part is similar to +IT8728F. It only supports 16-bit fan mode. + +The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled. Temperatures are measured in degrees Celsius. An alarm is triggered once when the Overtemperature Shutdown limit is crossed. @@ -156,10 +178,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery voltage in8 does not have limit registers. -On the IT8603E, IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs -are internal and scaled inside the chip: +On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some +voltage inputs are internal and scaled inside the chip: * in3 (optional) -* in7 (optional for IT8782F and IT8783E/F) +* in7 (optional for IT8781F, IT8782F, and IT8783E/F) * in8 (always) * in9 (relevant for IT8603E only) The driver handles this transparently so user-space doesn't have to care. diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index f3893f7440de..f7f1830a2566 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -11,12 +11,10 @@ Supported chips: http://www.atmel.com/Images/doc8711.pdf http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf - * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 + * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2, + TS3001GB2 Datasheets: - http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf - http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf - http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf - http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf + Available from IDT web site * Maxim MAX6604 Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904 new file mode 100644 index 000000000000..014f112e2a14 --- /dev/null +++ b/Documentation/hwmon/nct7904 @@ -0,0 +1,60 @@ +Kernel driver nct7904 +==================== + +Supported chip: + * Nuvoton NCT7904D + Prefix: nct7904 + Addresses: I2C 0x2d, 0x2e + Datasheet: Publicly available at Nuvoton website + http://www.nuvoton.com/ + +Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> + + +Description +----------- + +The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, +internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature +interface, up to 12 fan tachometer inputs, up to 4 fan control channels +with SmartFan. + + +Sysfs entries +------------- + +Currently, the driver supports only the following features: + +in[1-20]_input Input voltage measurements (mV) + +fan[1-12]_input Fan tachometer measurements (rpm) + +temp1_input Local temperature (1/1000 degree, + 0.125 degree resolution) + +temp[2-9]_input CPU temperatures (1/1000 degree, + 0.125 degree resolution) + +fan[1-4]_mode R/W, 0/1 for manual or SmartFan mode + Setting SmartFan mode is supported only if it has been + previously configured by BIOS (or configuration EEPROM) + +fan[1-4]_pwm R/O in SmartFan mode, R/W in manual control mode + +The driver checks sensor control registers and does not export the sensors +that are not enabled. Anyway, a sensor that is enabled may actually be not +connected and thus provide zero readings. + + +Limitations +----------- + +The following features are not supported in current version: + + - SmartFan control + - Watchdog + - GPIO + - external temperature sensors + - SMI + - min/max values + - many other... diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index bfcb1a62a7b4..01aa47d3b6ab 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1036,7 +1036,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: {"off" | "on" | "skip[mbr]"} efi= [EFI] - Format: { "old_map", "nochunk", "noruntime" } + Format: { "old_map", "nochunk", "noruntime", "debug" } old_map [X86-64]: switch to the old ioremap-based EFI runtime services mapping. 32-bit still uses this one by default. @@ -1044,6 +1044,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. boot stub, as chunking can cause problems with some firmware implementations. noruntime : disable EFI runtime services support + debug: enable misc debug output efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index 8afb236ca765..e51564c1a140 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -137,7 +137,7 @@ Indirect operating mode control. Consumer drivers can request a change in their supply regulator operating mode by calling :- -int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); +int regulator_set_load(struct regulator *regulator, int load_uA); This will cause the core to recalculate the total load on the regulator (based on all its consumers) and change operating mode (if necessary and permitted) diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 596b60c08b74..8446f1ea1410 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -204,266 +204,4 @@ Some common examples: * RTC_PIE_ON, RTC_PIE_OFF: These are also emulated by the generic code. -If all else fails, check out the rtc-test.c driver! - - --------------------- 8< ---------------- 8< ----------------------------- - -/* - * Real Time Clock Driver Test/Example Program - * - * Compile with: - * gcc -s -Wall -Wstrict-prototypes rtctest.c -o rtctest - * - * Copyright (C) 1996, Paul Gortmaker. - * - * Released under the GNU General Public License, version 2, - * included herein by reference. - * - */ - -#include <stdio.h> -#include <linux/rtc.h> -#include <sys/ioctl.h> -#include <sys/time.h> -#include <sys/types.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdlib.h> -#include <errno.h> - - -/* - * This expects the new RTC class driver framework, working with - * clocks that will often not be clones of what the PC-AT had. - * Use the command line to specify another RTC if you need one. - */ -static const char default_rtc[] = "/dev/rtc0"; - - -int main(int argc, char **argv) -{ - int i, fd, retval, irqcount = 0; - unsigned long tmp, data; - struct rtc_time rtc_tm; - const char *rtc = default_rtc; - - switch (argc) { - case 2: - rtc = argv[1]; - /* FALLTHROUGH */ - case 1: - break; - default: - fprintf(stderr, "usage: rtctest [rtcdev]\n"); - return 1; - } - - fd = open(rtc, O_RDONLY); - - if (fd == -1) { - perror(rtc); - exit(errno); - } - - fprintf(stderr, "\n\t\t\tRTC Driver Test Example.\n\n"); - - /* Turn on update interrupts (one per second) */ - retval = ioctl(fd, RTC_UIE_ON, 0); - if (retval == -1) { - if (errno == ENOTTY) { - fprintf(stderr, - "\n...Update IRQs not supported.\n"); - goto test_READ; - } - perror("RTC_UIE_ON ioctl"); - exit(errno); - } - - fprintf(stderr, "Counting 5 update (1/sec) interrupts from reading %s:", - rtc); - fflush(stderr); - for (i=1; i<6; i++) { - /* This read will block */ - retval = read(fd, &data, sizeof(unsigned long)); - if (retval == -1) { - perror("read"); - exit(errno); - } - fprintf(stderr, " %d",i); - fflush(stderr); - irqcount++; - } - - fprintf(stderr, "\nAgain, from using select(2) on /dev/rtc:"); - fflush(stderr); - for (i=1; i<6; i++) { - struct timeval tv = {5, 0}; /* 5 second timeout on select */ - fd_set readfds; - - FD_ZERO(&readfds); - FD_SET(fd, &readfds); - /* The select will wait until an RTC interrupt happens. */ - retval = select(fd+1, &readfds, NULL, NULL, &tv); - if (retval == -1) { - perror("select"); - exit(errno); - } - /* This read won't block unlike the select-less case above. */ - retval = read(fd, &data, sizeof(unsigned long)); - if (retval == -1) { - perror("read"); - exit(errno); - } - fprintf(stderr, " %d",i); - fflush(stderr); - irqcount++; - } - - /* Turn off update interrupts */ - retval = ioctl(fd, RTC_UIE_OFF, 0); - if (retval == -1) { - perror("RTC_UIE_OFF ioctl"); - exit(errno); - } - -test_READ: - /* Read the RTC time/date */ - retval = ioctl(fd, RTC_RD_TIME, &rtc_tm); - if (retval == -1) { - perror("RTC_RD_TIME ioctl"); - exit(errno); - } - - fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n", - rtc_tm.tm_mday, rtc_tm.tm_mon + 1, rtc_tm.tm_year + 1900, - rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); - - /* Set the alarm to 5 sec in the future, and check for rollover */ - rtc_tm.tm_sec += 5; - if (rtc_tm.tm_sec >= 60) { - rtc_tm.tm_sec %= 60; - rtc_tm.tm_min++; - } - if (rtc_tm.tm_min == 60) { - rtc_tm.tm_min = 0; - rtc_tm.tm_hour++; - } - if (rtc_tm.tm_hour == 24) - rtc_tm.tm_hour = 0; - - retval = ioctl(fd, RTC_ALM_SET, &rtc_tm); - if (retval == -1) { - if (errno == ENOTTY) { - fprintf(stderr, - "\n...Alarm IRQs not supported.\n"); - goto test_PIE; - } - perror("RTC_ALM_SET ioctl"); - exit(errno); - } - - /* Read the current alarm settings */ - retval = ioctl(fd, RTC_ALM_READ, &rtc_tm); - if (retval == -1) { - perror("RTC_ALM_READ ioctl"); - exit(errno); - } - - fprintf(stderr, "Alarm time now set to %02d:%02d:%02d.\n", - rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); - - /* Enable alarm interrupts */ - retval = ioctl(fd, RTC_AIE_ON, 0); - if (retval == -1) { - perror("RTC_AIE_ON ioctl"); - exit(errno); - } - - fprintf(stderr, "Waiting 5 seconds for alarm..."); - fflush(stderr); - /* This blocks until the alarm ring causes an interrupt */ - retval = read(fd, &data, sizeof(unsigned long)); - if (retval == -1) { - perror("read"); - exit(errno); - } - irqcount++; - fprintf(stderr, " okay. Alarm rang.\n"); - - /* Disable alarm interrupts */ - retval = ioctl(fd, RTC_AIE_OFF, 0); - if (retval == -1) { - perror("RTC_AIE_OFF ioctl"); - exit(errno); - } - -test_PIE: - /* Read periodic IRQ rate */ - retval = ioctl(fd, RTC_IRQP_READ, &tmp); - if (retval == -1) { - /* not all RTCs support periodic IRQs */ - if (errno == ENOTTY) { - fprintf(stderr, "\nNo periodic IRQ support\n"); - goto done; - } - perror("RTC_IRQP_READ ioctl"); - exit(errno); - } - fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", tmp); - - fprintf(stderr, "Counting 20 interrupts at:"); - fflush(stderr); - - /* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */ - for (tmp=2; tmp<=64; tmp*=2) { - - retval = ioctl(fd, RTC_IRQP_SET, tmp); - if (retval == -1) { - /* not all RTCs can change their periodic IRQ rate */ - if (errno == ENOTTY) { - fprintf(stderr, - "\n...Periodic IRQ rate is fixed\n"); - goto done; - } - perror("RTC_IRQP_SET ioctl"); - exit(errno); - } - - fprintf(stderr, "\n%ldHz:\t", tmp); - fflush(stderr); - - /* Enable periodic interrupts */ - retval = ioctl(fd, RTC_PIE_ON, 0); - if (retval == -1) { - perror("RTC_PIE_ON ioctl"); - exit(errno); - } - - for (i=1; i<21; i++) { - /* This blocks */ - retval = read(fd, &data, sizeof(unsigned long)); - if (retval == -1) { - perror("read"); - exit(errno); - } - fprintf(stderr, " %d",i); - fflush(stderr); - irqcount++; - } - - /* Disable periodic interrupts */ - retval = ioctl(fd, RTC_PIE_OFF, 0); - if (retval == -1) { - perror("RTC_PIE_OFF ioctl"); - exit(errno); - } - } - -done: - fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n"); - - close(fd); - - return 0; -} +If all else fails, check out the tools/testing/selftests/timers/rtctest.c test! diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 1d508dcbf859..8586efff1e99 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -786,7 +786,6 @@ port address 0x1400. irqm:1 same as initial settings (assumed BIOS settings) irqm:2 always totem pole irqm:0x10 driver will not use IRQF_SHARED flag when requesting irq - irqm:0x20 driver will not use IRQF_DISABLED flag when requesting irq (Bits 0x10 and 0x20 can be combined with hardware irq mode option) @@ -1231,30 +1230,6 @@ they only refer to system buffers that are well aligned. So, a work around may only be needed under Linux when a scatter/gather list is not used and when the SCSI DATA IN phase is reentered after a phase mismatch. -14.5 IRQ sharing problems - -When an IRQ is shared by devices that are handled by different drivers, it -may happen that one driver complains about the request of the IRQ having -failed. Inder Linux-2.0, this may be due to one driver having requested the -IRQ using the IRQF_DISABLED flag but some other having requested the same IRQ -without this flag. Under both Linux-2.0 and linux-2.2, this may be caused by -one driver not having requested the IRQ with the IRQF_SHARED flag. - -By default, the ncr53c8xx and sym53c8xx drivers request IRQs with both the -IRQF_DISABLED and the IRQF_SHARED flag under Linux-2.0 and with only the IRQF_SHARED -flag under Linux-2.2. - -Under Linux-2.0, you can disable use of IRQF_DISABLED flag from the boot -command line by using the following option: - - ncr53c8xx=irqm:0x20 (for the generic ncr53c8xx driver) - sym53c8xx=irqm:0x20 (for the sym53c8xx driver) - -If this does not fix the problem, then you may want to check how all other -drivers are requesting the IRQ and report the problem. Note that if at least -a single driver does not request the IRQ with the IRQF_SHARED flag (share IRQ), -then the request of the IRQ obviously will not succeed for all the drivers. - 15. SCSI problem troubleshooting 15.1 Problem tracking diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 0810132772a8..0e0322bf0020 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -107,10 +107,6 @@ produced errors and started to corrupt my disks. So don't do that! A 37.50 MHz PCI bus works for me, though, but I don't recommend using higher clocks than the 33.33 MHz being in the PCI spec. -If you want to share the IRQ with another device and the driver refuses to -do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to -IRQF_SHARED | IRQF_DISABLED. - 3.Features ---------- diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index d29734bff28c..d1824b399b2d 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers: .driver = { .name = "CHIP", .owner = THIS_MODULE, + .pm = &CHIP_pm_ops, }, .probe = CHIP_probe, .remove = CHIP_remove, - .suspend = CHIP_suspend, - .resume = CHIP_resume, }; The driver core will automatically attempt to bind this driver to any SPI diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 3a2f9d59edab..94f574b0fdb2 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -15,6 +15,7 @@ #include <unistd.h> #include <stdio.h> #include <stdlib.h> +#include <string.h> #include <getopt.h> #include <fcntl.h> #include <sys/ioctl.h> @@ -34,24 +35,79 @@ static uint32_t mode; static uint8_t bits = 8; static uint32_t speed = 500000; static uint16_t delay; +static int verbose; -static void transfer(int fd) +uint8_t default_tx[] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0x0D, +}; + +uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +char *input_tx; + +static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +{ + int i = 0; + const unsigned char *address = src; + const unsigned char *line = address; + unsigned char c; + + printf("%s | ", prefix); + while (length-- > 0) { + printf("%02X ", *address++); + if (!(++i % line_size) || (length == 0 && i % line_size)) { + if (length == 0) { + while (i++ % line_size) + printf("__ "); + } + printf(" | "); /* right close */ + while (line < address) { + c = *line++; + printf("%c", (c < 33 || c == 255) ? 0x2E : c); + } + printf("\n"); + if (length > 0) + printf("%s | ", prefix); + } + } +} + +/* + * Unescape - process hexadecimal escape character + * converts shell input "\x23" -> 0x23 + */ +int unespcape(char *_dst, char *_src, size_t len) +{ + int ret = 0; + char *src = _src; + char *dst = _dst; + unsigned int ch; + + while (*src) { + if (*src == '\\' && *(src+1) == 'x') { + sscanf(src + 2, "%2x", &ch); + src += 4; + *dst++ = (unsigned char)ch; + } else { + *dst++ = *src++; + } + ret++; + } + return ret; +} + +static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) { int ret; - uint8_t tx[] = { - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xDE, 0xAD, 0xBE, 0xEF, 0xBA, 0xAD, - 0xF0, 0x0D, - }; - uint8_t rx[ARRAY_SIZE(tx)] = {0, }; + struct spi_ioc_transfer tr = { .tx_buf = (unsigned long)tx, .rx_buf = (unsigned long)rx, - .len = ARRAY_SIZE(tx), + .len = len, .delay_usecs = delay, .speed_hz = speed, .bits_per_word = bits, @@ -76,12 +132,9 @@ static void transfer(int fd) if (ret < 1) pabort("can't send spi message"); - for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { - if (!(ret % 6)) - puts(""); - printf("%.2X ", rx[ret]); - } - puts(""); + if (verbose) + hex_dump(tx, len, 32, "TX"); + hex_dump(rx, len, 32, "RX"); } static void print_usage(const char *prog) @@ -97,6 +150,8 @@ static void print_usage(const char *prog) " -L --lsb least significant bit first\n" " -C --cs-high chip select active high\n" " -3 --3wire SI/SO signals shared\n" + " -v --verbose Verbose (show tx buffer)\n" + " -p Send data (e.g. \"1234\\xde\\xad\")\n" " -N --no-cs no chip select\n" " -R --ready slave pulls low to pause\n" " -2 --dual dual transfer\n" @@ -121,12 +176,13 @@ static void parse_opts(int argc, char *argv[]) { "no-cs", 0, 0, 'N' }, { "ready", 0, 0, 'R' }, { "dual", 0, 0, '2' }, + { "verbose", 0, 0, 'v' }, { "quad", 0, 0, '4' }, { NULL, 0, 0, 0 }, }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); if (c == -1) break; @@ -165,9 +221,15 @@ static void parse_opts(int argc, char *argv[]) case 'N': mode |= SPI_NO_CS; break; + case 'v': + verbose = 1; + break; case 'R': mode |= SPI_READY; break; + case 'p': + input_tx = optarg; + break; case '2': mode |= SPI_TX_DUAL; break; @@ -191,6 +253,9 @@ int main(int argc, char *argv[]) { int ret = 0; int fd; + uint8_t *tx; + uint8_t *rx; + int size; parse_opts(argc, argv); @@ -235,7 +300,17 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - transfer(fd); + if (input_tx) { + size = strlen(input_tx+1); + tx = malloc(size); + rx = malloc(size); + size = unespcape((char *)tx, input_tx, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); + } else { + transfer(fd, default_tx, default_rx, sizeof(default_tx)); + } close(fd); diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index 02f8331edb8b..58d0ac4df946 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -81,6 +81,16 @@ format in the sign-off area: git cherry-pick fd21073 git cherry-pick <this commit> +Also, some patches may have kernel version prerequisites. This can be +specified in the following format in the sign-off area: + + Cc: <stable@vger.kernel.org> # 3.3.x- + + The tag has the meaning of: + git cherry-pick <this commit> + + For each "-stable" tree starting with the specified version. + Following the submission: - The sender will receive an ACK when the patch has been accepted into the diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 995c8bca40e2..3f848c1f2940 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -69,3 +69,24 @@ cat /sys/kernel/debug/ci_hdrc.0/registers ---------------------- "On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 Revision 2.0 version 1.1a" + +2. How to enable USB as system wakeup source +----------------------------------- +Below is the example for how to enable USB as system wakeup source +at imx6 platform. + +2.1 Enable core's wakeup +echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup +2.2 Enable glue layer's wakeup +echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup +2.3 Enable PHY's wakeup (optional) +echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup +2.4 Enable roothub's wakeup +echo enabled > /sys/bus/usb/devices/usb1/power/wakeup +2.5 Enable related device's wakeup +echo enabled > /sys/bus/usb/devices/1-1/power/wakeup + +If the system has only one usb port, and you want usb wakeup at this port, you +can use below script to enable usb wakeup. +for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done; + diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index 076ac7ba7f93..f45b2bf4b41d 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -19,6 +19,7 @@ provided by gadgets. 16. UAC1 function 17. UAC2 function 18. UVC function +19. PRINTER function 1. ACM function @@ -726,3 +727,49 @@ with these patches: http://www.spinics.net/lists/linux-usb/msg99220.html host: luvcview -f yuv + +19. PRINTER function +==================== + +The function is provided by usb_f_printer.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "printer". +The printer function provides these attributes in its function directory: + + pnp_string - Data to be passed to the host in pnp string + q_len - Number of requests per endpoint + +Testing the PRINTER function +---------------------------- + +The most basic testing: + +device: run the gadget +# ls -l /devices/virtual/usb_printer_gadget/ + +should show g_printer<number>. + +If udev is active, then /dev/g_printer<number> should appear automatically. + +host: + +If udev is active, then e.g. /dev/usb/lp0 should appear. + +host->device transmission: + +device: +# cat /dev/g_printer<number> +host: +# cat > /dev/usb/lp0 + +device->host transmission: + +# cat > /dev/g_printer<number> +host: +# cat /dev/usb/lp0 + +More advanced testing can be done with the prn_example +described in Documentation/usb/gadget-printer.txt. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index b112efc816f1..bc9f6fe44e27 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -997,7 +997,7 @@ for vm-wide capabilities. 4.38 KVM_GET_MP_STATE Capability: KVM_CAP_MP_STATE -Architectures: x86, s390 +Architectures: x86, s390, arm, arm64 Type: vcpu ioctl Parameters: struct kvm_mp_state (out) Returns: 0 on success; -1 on error @@ -1011,7 +1011,7 @@ uniprocessor guests). Possible values are: - - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86] + - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86,arm/arm64] - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP) which has not yet received an INIT signal [x86] - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is @@ -1020,7 +1020,7 @@ Possible values are: is waiting for an interrupt [x86] - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector accessible via KVM_GET_VCPU_EVENTS) [x86] - - KVM_MP_STATE_STOPPED: the vcpu is stopped [s390] + - KVM_MP_STATE_STOPPED: the vcpu is stopped [s390,arm/arm64] - KVM_MP_STATE_CHECK_STOP: the vcpu is in a special error state [s390] - KVM_MP_STATE_OPERATING: the vcpu is operating (running or halted) [s390] @@ -1031,11 +1031,15 @@ On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on these architectures. +For arm/arm64: + +The only states that are valid are KVM_MP_STATE_STOPPED and +KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not. 4.39 KVM_SET_MP_STATE Capability: KVM_CAP_MP_STATE -Architectures: x86, s390 +Architectures: x86, s390, arm, arm64 Type: vcpu ioctl Parameters: struct kvm_mp_state (in) Returns: 0 on success; -1 on error @@ -1047,6 +1051,10 @@ On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on these architectures. +For arm/arm64: + +The only states that are valid are KVM_MP_STATE_STOPPED and +KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not. 4.40 KVM_SET_IDENTITY_MAP_ADDR @@ -1967,15 +1975,25 @@ registers, find a list below: MIPS | KVM_REG_MIPS_CP0_STATUS | 32 MIPS | KVM_REG_MIPS_CP0_CAUSE | 32 MIPS | KVM_REG_MIPS_CP0_EPC | 64 + MIPS | KVM_REG_MIPS_CP0_PRID | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG1 | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG2 | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG3 | 32 + MIPS | KVM_REG_MIPS_CP0_CONFIG4 | 32 + MIPS | KVM_REG_MIPS_CP0_CONFIG5 | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG7 | 32 MIPS | KVM_REG_MIPS_CP0_ERROREPC | 64 MIPS | KVM_REG_MIPS_COUNT_CTL | 64 MIPS | KVM_REG_MIPS_COUNT_RESUME | 64 MIPS | KVM_REG_MIPS_COUNT_HZ | 64 + MIPS | KVM_REG_MIPS_FPR_32(0..31) | 32 + MIPS | KVM_REG_MIPS_FPR_64(0..31) | 64 + MIPS | KVM_REG_MIPS_VEC_128(0..31) | 128 + MIPS | KVM_REG_MIPS_FCR_IR | 32 + MIPS | KVM_REG_MIPS_FCR_CSR | 32 + MIPS | KVM_REG_MIPS_MSA_IR | 32 + MIPS | KVM_REG_MIPS_MSA_CSR | 32 ARM registers are mapped using the lower 32 bits. The upper 16 of that is the register group type, or coprocessor number: @@ -2029,6 +2047,25 @@ patterns depending on whether they're 32-bit or 64-bit registers: MIPS KVM control registers (see above) have the following id bit patterns: 0x7030 0000 0002 <reg:16> +MIPS FPU registers (see KVM_REG_MIPS_FPR_{32,64}() above) have the following +id bit patterns depending on the size of the register being accessed. They are +always accessed according to the current guest FPU mode (Status.FR and +Config5.FRE), i.e. as the guest would see them, and they become unpredictable +if the guest FPU mode is changed. MIPS SIMD Architecture (MSA) vector +registers (see KVM_REG_MIPS_VEC_128() above) have similar patterns as they +overlap the FPU registers: + 0x7020 0000 0003 00 <0:3> <reg:5> (32-bit FPU registers) + 0x7030 0000 0003 00 <0:3> <reg:5> (64-bit FPU registers) + 0x7040 0000 0003 00 <0:3> <reg:5> (128-bit MSA vector registers) + +MIPS FPU control registers (see KVM_REG_MIPS_FCR_{IR,CSR} above) have the +following id bit patterns: + 0x7020 0000 0003 01 <0:3> <reg:5> + +MIPS MSA control registers (see KVM_REG_MIPS_MSA_{IR,CSR} above) have the +following id bit patterns: + 0x7020 0000 0003 02 <0:3> <reg:5> + 4.69 KVM_GET_ONE_REG @@ -2234,7 +2271,7 @@ into the hash PTE second double word). 4.75 KVM_IRQFD Capability: KVM_CAP_IRQFD -Architectures: x86 s390 +Architectures: x86 s390 arm arm64 Type: vm ioctl Parameters: struct kvm_irqfd (in) Returns: 0 on success, -1 on error @@ -2260,6 +2297,10 @@ Note that closing the resamplefd is not sufficient to disable the irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment and need not be specified with KVM_IRQFD_FLAG_DEASSIGN. +On ARM/ARM64, the gsi field in the kvm_irqfd struct specifies the Shared +Peripheral Interrupt (SPI) index, such that the GIC interrupt ID is +given by gsi + 32. + 4.76 KVM_PPC_ALLOCATE_HTAB Capability: KVM_CAP_PPC_ALLOC_HTAB @@ -2716,6 +2757,227 @@ The fields in each entry are defined as follows: eax, ebx, ecx, edx: the values returned by the cpuid instruction for this function/index combination +4.89 KVM_S390_MEM_OP + +Capability: KVM_CAP_S390_MEM_OP +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_mem_op (in) +Returns: = 0 on success, + < 0 on generic error (e.g. -EFAULT or -ENOMEM), + > 0 if an exception occurred while walking the page tables + +Read or write data from/to the logical (virtual) memory of a VPCU. + +Parameters are specified via the following structure: + +struct kvm_s390_mem_op { + __u64 gaddr; /* the guest address */ + __u64 flags; /* flags */ + __u32 size; /* amount of bytes */ + __u32 op; /* type of operation */ + __u64 buf; /* buffer in userspace */ + __u8 ar; /* the access register number */ + __u8 reserved[31]; /* should be set to 0 */ +}; + +The type of operation is specified in the "op" field. It is either +KVM_S390_MEMOP_LOGICAL_READ for reading from logical memory space or +KVM_S390_MEMOP_LOGICAL_WRITE for writing to logical memory space. The +KVM_S390_MEMOP_F_CHECK_ONLY flag can be set in the "flags" field to check +whether the corresponding memory access would create an access exception +(without touching the data in the memory at the destination). In case an +access exception occurred while walking the MMU tables of the guest, the +ioctl returns a positive error number to indicate the type of exception. +This exception is also raised directly at the corresponding VCPU if the +flag KVM_S390_MEMOP_F_INJECT_EXCEPTION is set in the "flags" field. + +The start address of the memory region has to be specified in the "gaddr" +field, and the length of the region in the "size" field. "buf" is the buffer +supplied by the userspace application where the read data should be written +to for KVM_S390_MEMOP_LOGICAL_READ, or where the data that should be written +is stored for a KVM_S390_MEMOP_LOGICAL_WRITE. "buf" is unused and can be NULL +when KVM_S390_MEMOP_F_CHECK_ONLY is specified. "ar" designates the access +register number to be used. + +The "reserved" field is meant for future extensions. It is not used by +KVM with the currently defined set of flags. + +4.90 KVM_S390_GET_SKEYS + +Capability: KVM_CAP_S390_SKEYS +Architectures: s390 +Type: vm ioctl +Parameters: struct kvm_s390_skeys +Returns: 0 on success, KVM_S390_GET_KEYS_NONE if guest is not using storage + keys, negative value on error + +This ioctl is used to get guest storage key values on the s390 +architecture. The ioctl takes parameters via the kvm_s390_skeys struct. + +struct kvm_s390_skeys { + __u64 start_gfn; + __u64 count; + __u64 skeydata_addr; + __u32 flags; + __u32 reserved[9]; +}; + +The start_gfn field is the number of the first guest frame whose storage keys +you want to get. + +The count field is the number of consecutive frames (starting from start_gfn) +whose storage keys to get. The count field must be at least 1 and the maximum +allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range +will cause the ioctl to return -EINVAL. + +The skeydata_addr field is the address to a buffer large enough to hold count +bytes. This buffer will be filled with storage key data by the ioctl. + +4.91 KVM_S390_SET_SKEYS + +Capability: KVM_CAP_S390_SKEYS +Architectures: s390 +Type: vm ioctl +Parameters: struct kvm_s390_skeys +Returns: 0 on success, negative value on error + +This ioctl is used to set guest storage key values on the s390 +architecture. The ioctl takes parameters via the kvm_s390_skeys struct. +See section on KVM_S390_GET_SKEYS for struct definition. + +The start_gfn field is the number of the first guest frame whose storage keys +you want to set. + +The count field is the number of consecutive frames (starting from start_gfn) +whose storage keys to get. The count field must be at least 1 and the maximum +allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range +will cause the ioctl to return -EINVAL. + +The skeydata_addr field is the address to a buffer containing count bytes of +storage keys. Each byte in the buffer will be set as the storage key for a +single frame starting at start_gfn for count frames. + +Note: If any architecturally invalid key value is found in the given data then +the ioctl will return -EINVAL. + +4.92 KVM_S390_IRQ + +Capability: KVM_CAP_S390_INJECT_IRQ +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_irq (in) +Returns: 0 on success, -1 on error +Errors: + EINVAL: interrupt type is invalid + type is KVM_S390_SIGP_STOP and flag parameter is invalid value + type is KVM_S390_INT_EXTERNAL_CALL and code is bigger + than the maximum of VCPUs + EBUSY: type is KVM_S390_SIGP_SET_PREFIX and vcpu is not stopped + type is KVM_S390_SIGP_STOP and a stop irq is already pending + type is KVM_S390_INT_EXTERNAL_CALL and an external call interrupt + is already pending + +Allows to inject an interrupt to the guest. + +Using struct kvm_s390_irq as a parameter allows +to inject additional payload which is not +possible via KVM_S390_INTERRUPT. + +Interrupt parameters are passed via kvm_s390_irq: + +struct kvm_s390_irq { + __u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_emerg_info emerg; + struct kvm_s390_extcall_info extcall; + struct kvm_s390_prefix_info prefix; + struct kvm_s390_stop_info stop; + struct kvm_s390_mchk_info mchk; + char reserved[64]; + } u; +}; + +type can be one of the following: + +KVM_S390_SIGP_STOP - sigp stop; parameter in .stop +KVM_S390_PROGRAM_INT - program check; parameters in .pgm +KVM_S390_SIGP_SET_PREFIX - sigp set prefix; parameters in .prefix +KVM_S390_RESTART - restart; no parameters +KVM_S390_INT_CLOCK_COMP - clock comparator interrupt; no parameters +KVM_S390_INT_CPU_TIMER - CPU timer interrupt; no parameters +KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg +KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall +KVM_S390_MCHK - machine check interrupt; parameters in .mchk + + +Note that the vcpu ioctl is asynchronous to vcpu execution. + +4.94 KVM_S390_GET_IRQ_STATE + +Capability: KVM_CAP_S390_IRQ_STATE +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_irq_state (out) +Returns: >= number of bytes copied into buffer, + -EINVAL if buffer size is 0, + -ENOBUFS if buffer size is too small to fit all pending interrupts, + -EFAULT if the buffer address was invalid + +This ioctl allows userspace to retrieve the complete state of all currently +pending interrupts in a single buffer. Use cases include migration +and introspection. The parameter structure contains the address of a +userspace buffer and its length: + +struct kvm_s390_irq_state { + __u64 buf; + __u32 flags; + __u32 len; + __u32 reserved[4]; +}; + +Userspace passes in the above struct and for each pending interrupt a +struct kvm_s390_irq is copied to the provided buffer. + +If -ENOBUFS is returned the buffer provided was too small and userspace +may retry with a bigger buffer. + +4.95 KVM_S390_SET_IRQ_STATE + +Capability: KVM_CAP_S390_IRQ_STATE +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_irq_state (in) +Returns: 0 on success, + -EFAULT if the buffer address was invalid, + -EINVAL for an invalid buffer length (see below), + -EBUSY if there were already interrupts pending, + errors occurring when actually injecting the + interrupt. See KVM_S390_IRQ. + +This ioctl allows userspace to set the complete state of all cpu-local +interrupts currently pending for the vcpu. It is intended for restoring +interrupt state after a migration. The input parameter is a userspace buffer +containing a struct kvm_s390_irq_state: + +struct kvm_s390_irq_state { + __u64 buf; + __u32 len; + __u32 pad; +}; + +The userspace memory referenced by buf contains a struct kvm_s390_irq +for each interrupt to be injected into the guest. +If one of the interrupts could not be injected for some reason the +ioctl aborts. + +len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0 +and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq), +which is the maximum number of possibly pending cpu-local interrupts. + 5. The kvm_run structure ------------------------ @@ -3189,6 +3451,31 @@ Parameters: none This capability enables the in-kernel irqchip for s390. Please refer to "4.24 KVM_CREATE_IRQCHIP" for details. +6.9 KVM_CAP_MIPS_FPU + +Architectures: mips +Target: vcpu +Parameters: args[0] is reserved for future use (should be 0). + +This capability allows the use of the host Floating Point Unit by the guest. It +allows the Config1.FP bit to be set to enable the FPU in the guest. Once this is +done the KVM_REG_MIPS_FPR_* and KVM_REG_MIPS_FCR_* registers can be accessed +(depending on the current guest FPU register mode), and the Status.FR, +Config5.FRE bits are accessible via the KVM API and also from the guest, +depending on them being supported by the FPU. + +6.10 KVM_CAP_MIPS_MSA + +Architectures: mips +Target: vcpu +Parameters: args[0] is reserved for future use (should be 0). + +This capability allows the use of the MIPS SIMD Architecture (MSA) by the guest. +It allows the Config3.MSAP bit to be set to enable the use of MSA by the guest. +Once this is done the KVM_REG_MIPS_VEC_* and KVM_REG_MIPS_MSA_* registers can be +accessed, and the Config5.MSAEn bit is accessible via the KVM API and also from +the guest. + 7. Capabilities that can be enabled on VMs ------------------------------------------ @@ -3248,3 +3535,41 @@ All other orders will be handled completely in user space. Only privileged operation exceptions will be checked for in the kernel (or even in the hardware prior to interception). If this capability is not enabled, the old way of handling SIGP orders is used (partially in kernel and user space). + +7.3 KVM_CAP_S390_VECTOR_REGISTERS + +Architectures: s390 +Parameters: none +Returns: 0 on success, negative value on error + +Allows use of the vector registers introduced with z13 processor, and +provides for the synchronization between host and user space. Will +return -EINVAL if the machine does not support vectors. + +7.4 KVM_CAP_S390_USER_STSI + +Architectures: s390 +Parameters: none + +This capability allows post-handlers for the STSI instruction. After +initial handling in the kernel, KVM exits to user space with +KVM_EXIT_S390_STSI to allow user space to insert further data. + +Before exiting to userspace, kvm handlers should fill in s390_stsi field of +vcpu->run: +struct { + __u64 addr; + __u8 ar; + __u8 reserved; + __u8 fc; + __u8 sel1; + __u16 sel2; +} s390_stsi; + +@addr - guest address of STSI SYSIB +@fc - function code +@sel1 - selector 1 +@sel2 - selector 2 +@ar - access register number + +KVM handlers should exit to userspace with rc = -EREMOTE. diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt index 4ceef53164b0..d1ad9d5cae46 100644 --- a/Documentation/virtual/kvm/devices/s390_flic.txt +++ b/Documentation/virtual/kvm/devices/s390_flic.txt @@ -27,6 +27,9 @@ Groups: Copies all floating interrupts into a buffer provided by userspace. When the buffer is too small it returns -ENOMEM, which is the indication for userspace to try again with a bigger buffer. + -ENOBUFS is returned when the allocation of a kernelspace buffer has + failed. + -EFAULT is returned when copying data to userspace failed. All interrupts remain pending, i.e. are not deleted from the list of currently pending interrupts. attr->addr contains the userspace address of the buffer into which all diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index a75e3adaa39d..88b85899d309 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -406,6 +406,12 @@ Protocol: 2.00+ - If 0, the protected-mode code is loaded at 0x10000. - If 1, the protected-mode code is loaded at 0x100000. + Bit 1 (kernel internal): ALSR_FLAG + - Used internally by the compressed kernel to communicate + KASLR status to kernel proper. + If 1, KASLR enabled. + If 0, KASLR disabled. + Bit 5 (write): QUIET_FLAG - If 0, print early messages. - If 1, suppress early messages. |