1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
deleted file mode 100644
index 98916a84bbf6..000000000000
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Denali NAND controller
-
-Required properties:
-  - compatible : should be one of the following:
-      "altr,socfpga-denali-nand"            - for Altera SOCFPGA
-      "socionext,uniphier-denali-nand-v5a"  - for Socionext UniPhier (v5a)
-      "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
-  - reg : should contain registers location and length for data and reg.
-  - reg-names: Should contain the reg names "nand_data" and "denali_reg"
-  - #address-cells: should be 1. The cell encodes the chip select connection.
-  - #size-cells : should be 0.
-  - interrupts : The interrupt number.
-  - clocks: should contain phandle of the controller core clock, the bus
-    interface clock, and the ECC circuit clock.
-  - clock-names: should contain "nand", "nand_x", "ecc"
-
-Optional properties:
-  - resets: may contain phandles to the controller core reset, the register
-    reset
-  - reset-names: may contain "nand", "reg"
-
-Sub-nodes:
-  Sub-nodes represent available NAND chips.
-
-  Required properties:
-    - reg: should contain the bank ID of the controller to which each chip
-      select is connected.
-
-  Optional properties:
-    - nand-ecc-step-size: see nand-controller.yaml for details.
-      If present, the value must be
-        512        for "altr,socfpga-denali-nand"
-        1024       for "socionext,uniphier-denali-nand-v5a"
-        1024       for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
-        8, 15      for "altr,socfpga-denali-nand"
-        8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
-        8, 16      for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-maximize: see nand-controller.yaml for details
-
-The chip nodes may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-nand: nand@ff900000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "altr,socfpga-denali-nand";
-	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
-	reg-names = "nand_data", "denali_reg";
-	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
-	clock-names = "nand", "nand_x", "ecc";
-	resets = <&nand_rst>, <&nand_reg_rst>;
-	reset-names = "nand", "reg";
-	interrupts = <0 144 4>;
-
-	nand@0 {
-		reg = <0>;
-	}
-};