diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
10 files changed, 293 insertions, 166 deletions
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt deleted file mode 100644 index 0b96e5737d3a..000000000000 --- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Freescale MMA8450 3-Axis Accelerometer - -Required properties: -- compatible : "fsl,mma8450". -- reg: the I2C address of MMA8450 - -Example: - -accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; -}; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt index 34ab5763f494..6cd08bca2c66 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -8,6 +8,8 @@ PROPERTIES Definition: must be one of: "qcom,pm8941-pwrkey" "qcom,pm8941-resin" + "qcom,pmk8350-pwrkey" + "qcom,pmk8350-resin" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml new file mode 100644 index 000000000000..762e56ee90cd --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8CTMA340 series touchscreen controller bindings + +description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after + the marketing name Cypress TrueTouch Standard Product) touchscreens can + be connected to either I2C or SPI buses. + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + oneOf: + - const: cypress,cy8ctma340 + - const: cypress,cy8ctst341 + - const: cypress,cyttsp-spi + description: Legacy compatible for SPI connected CY8CTMA340 + deprecated: true + - const: cypress,cyttsp-i2c + description: Legacy compatible for I2C connected CY8CTMA340 + deprecated: true + + reg: + description: I2C address when used on the I2C bus, or the SPI chip + select index when used on the SPI bus + + clock-frequency: + description: I2C client clock frequency, defined for host when using + the device on the I2C bus + minimum: 0 + maximum: 400000 + + spi-max-frequency: + description: SPI clock frequency, defined for host, defined when using + the device on the SPI bus. The throughput is maximum 2 Mbps so the + typical value is 2000000, if higher rates are used the total throughput + needs to be restricted to 2 Mbps. + minimum: 0 + maximum: 6000000 + + interrupts: + description: Interrupt to host + maxItems: 1 + + vcpin-supply: + description: Analog power supply regulator on VCPIN pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + reset-gpios: + description: Reset line for the touchscreen, should be tagged + as GPIO_ACTIVE_LOW + + bootloader-key: + description: the 8-byte bootloader key that is required to switch + the chip from bootloader mode (default mode) to application mode + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + + active-distance: + description: the distance in pixels beyond which a touch must move + before movement is detected and reported by the device + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + active-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in active mode + minimum: 0 + maximum: 255 + + lowpower-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in low-power mode + minimum: 0 + maximum: 2550 + + touch-timeout-ms: + description: minimum time in ms spent in the active power state while no + touches are detected before entering low-power mode + minimum: 0 + maximum: 2550 + + use-handshake: + description: enable register-based handshake (boolean). This should only + be used if the chip is configured to use 'blocking communication with + timeout' (in this case the device generates an interrupt at the end of + every scanning/processing cycle) + $ref: /schemas/types.yaml#/definitions/flag + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - bootloader-key + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + vdd-supply = <&ldo_aux1_reg>; + vcpin-supply = <&ldo_aux2_reg>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt deleted file mode 100644 index 6ee274aa8b03..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt +++ /dev/null @@ -1,93 +0,0 @@ -* Cypress cyttsp touchscreen controller - -Required properties: - - compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi" - - reg : Device I2C address or SPI chip select number - - spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi) - - interrupts : (gpio) interrupt to which the chip is connected - (see interrupt binding[0]). - - bootloader-key : the 8-byte bootloader key that is required to switch - the chip from bootloader mode (default mode) to - application mode. - This property has to be specified as an array of 8 - '/bits/ 8' values. - -Optional properties: - - reset-gpios : the reset gpio the chip is connected to - (see GPIO binding[1] for more details). - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - - touchscreen-fuzz-x : horizontal noise value of the absolute input device - (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input device - (in pixels) - - active-distance : the distance in pixels beyond which a touch must move - before movement is detected and reported by the device. - Valid values: 0-15. - - active-interval-ms : the minimum period in ms between consecutive - scanning/processing cycles when the chip is in active mode. - Valid values: 0-255. - - lowpower-interval-ms : the minimum period in ms between consecutive - scanning/processing cycles when the chip is in low-power mode. - Valid values: 0-2550 - - touch-timeout-ms : minimum time in ms spent in the active power state while no - touches are detected before entering low-power mode. - Valid values: 0-2550 - - use-handshake : enable register-based handshake (boolean). This should - only be used if the chip is configured to use 'blocking - communication with timeout' (in this case the device - generates an interrupt at the end of every - scanning/processing cycle). - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - &i2c1 { - /* ... */ - cyttsp@a { - compatible = "cypress,cyttsp-i2c"; - reg = <0xa>; - interrupt-parent = <&gpio0>; - interrupts = <28 0>; - reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; - - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - - bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; - active-distance = <8>; - active-interval-ms = <0>; - lowpower-interval-ms = <200>; - touch-timeout-ms = <100>; - }; - - /* ... */ - }; - - &mcspi1 { - /* ... */ - cyttsp@0 { - compatible = "cypress,cyttsp-spi"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <28 0>; - reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; - - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - - bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; - active-distance = <8>; - active-interval-ms = <0>; - lowpower-interval-ms = <200>; - touch-timeout-ms = <100>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index bfc3a8b5e118..2e8da7470513 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -56,6 +56,7 @@ properties: wakeup-source: true vcc-supply: true + iovcc-supply: true gain: description: Allows setting the sensitivity in the range from 0 to 31. diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt deleted file mode 100644 index af5223bb5bdd..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt +++ /dev/null @@ -1,33 +0,0 @@ -Generic resistive touchscreen ADC - -Required properties: - - - compatible: must be "resistive-adc-touch" -The device must be connected to an ADC device that provides channels for -position measurement and optional pressure. -Refer to -https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml -for details - - - iio-channels: must have at least two channels connected to an ADC device. -These should correspond to the channels exposed by the ADC device and should -have the right index as the ADC device registers them. These channels -represent the relative position on the "x" and "y" axes. - - iio-channel-names: must have all the channels' names. Mandatory channels -are "x" and "y". - -Optional properties: - - iio-channels: The third channel named "pressure" is optional and can be -used if the ADC device also measures pressure besides position. -If this channel is missing, pressure will be ignored and the touchscreen -will only report position. - - iio-channel-names: optional channel named "pressure". - -Example: - - resistive_touch: resistive_touch { - compatible = "resistive-adc-touch"; - touchscreen-min-pressure = <50000>; - io-channels = <&adc 24>, <&adc 25>, <&adc 26>; - io-channel-names = "x", "y", "pressure"; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml new file mode 100644 index 000000000000..7fc22a403d48 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic resistive touchscreen ADC + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Generic ADC based resistive touchscreen controller + The device must be connected to an ADC device that provides channels for + position measurement and optional pressure. + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: resistive-adc-touch + + io-channels: + minItems: 2 + items: + - description: x + - description: y + - description: pressure (optional) + - description: z1 (optional) + - description: z2 (optional) + + io-channel-names: + oneOf: + - items: + - enum: [x, y] + - enum: [x, y] + - items: + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - items: + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-min-pressure: true + touchscreen-x-plate-ohms: true + +additionalProperties: false + +required: + - compatible + - io-channels + - io-channel-names + +examples: + - | + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc 24>, <&adc 25>; + io-channel-names = "y", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "y", "pressure", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + io-channel-names = "x", "z1", "z2", "y"; + touchscreen-x-plate-ohms = <800>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml new file mode 100644 index 000000000000..1d8ca19fd37a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix st1232 or st1633 touchscreen controller + +maintainers: + - Bastian Hecht <hechtb@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - sitronix,st1232 + - sitronix,st1633 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpios: + description: A phandle to the reset GPIO + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupts = <2 0>; + gpios = <&gpio1 166 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt deleted file mode 100644 index 019373253b28..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Sitronix st1232 or st1633 touchscreen controller - -Required properties: -- compatible: must contain one of - * "sitronix,st1232" - * "sitronix,st1633" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected - -Optional properties: -- gpios: a phandle to the reset GPIO - -For additional optional properties see: touchscreen.txt - -Example: - - i2c@00000000 { - /* ... */ - - touchscreen@55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupts = <2 0>; - gpios = <&gpio1 166 0>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 046ace461cc9..4b5b212c772c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -74,6 +74,12 @@ properties: touchscreen-y-mm: description: vertical length in mm of the touchscreen + touchscreen-x-plate-ohms: + description: Resistance of the X-plate in Ohms + + touchscreen-y-plate-ohms: + description: Resistance of the Y-plate in Ohms + dependencies: touchscreen-size-x: [ touchscreen-size-y ] touchscreen-size-y: [ touchscreen-size-x ] |