1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
deleted file mode 100644
index cd28e932bf50..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-  The following <soc>s are known to be supported:
-	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
-	ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-
-Optional properties:
-- little-endian : GPIO registers are used as little endian. If not
-                  present registers are used as big endian by default.
-
-Example of gpio-controller node for a mpc5125 SoC:
-
-gpio0: gpio@1100 {
-	compatible = "fsl,mpc5125-gpio";
-	#gpio-cells = <2>;
-	reg = <0x1100 0x080>;
-	interrupts = <78 0x8>;
-};
-
-Example of gpio-controller node for a ls2080a SoC:
-
-gpio0: gpio@2300000 {
-	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <0 36 0x4>; /* Level high type */
-	gpio-controller;
-	little-endian;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-
-Example of gpio-controller node for a ls1028a/ls1088a SoC:
-
-gpio1: gpio@2300000 {
-	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	little-endian;
-};