1 files changed, 0 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
deleted file mode 100644
index 7cafcb98ead7..000000000000
--- a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Clock bindings for ST-Ericsson U300 System Controller Clocks
-
-Bindings for the gated system controller clocks:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-clk"
-- #clock-cells: must be <0>
-- clock-type: specifies the type of clock:
-  0 = slow clock
-  1 = fast clock
-  2 = rest/remaining clock
-- clock-id: specifies the clock in the type range
-
-Optional properties:
-- clocks: parent clock(s)
-
-The available clocks per type are as follows:
-
-Type:  ID:   Clock:
--------------------
-0      0     Slow peripheral bridge clock
-0      1     UART0 clock
-0      4     GPIO clock
-0      6     RTC clock
-0      7     Application timer clock
-0      8     Access timer clock
-
-1      0     Fast peripheral bridge clock
-1      1     I2C bus 0 clock
-1      2     I2C bus 1 clock
-1      5     MMC interface peripheral (silicon) clock
-1      6     SPI clock
-
-2      3     CPU clock
-2      4     DMA controller clock
-2      5     External Memory Interface (EMIF) clock
-2      6     NAND flask interface clock
-2      8     XGAM graphics engine clock
-2      9     Shared External Memory Interface (SEMI) clock
-2      10    AHB Subsystem Bridge clock
-2      12    Interrupt controller clock
-
-Example:
-
-gpio_clk: gpio_clk@13M {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-clk";
-	clock-type = <0>; /* Slow */
-	clock-id = <4>;
-	clocks = <&slow_clk>;
-};
-
-gpio: gpio@c0016000 {
-	compatible = "stericsson,gpio-coh901";
-	(...)
-	clocks = <&gpio_clk>;
-};
-
-
-Bindings for the MMC/SD card clock:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-mclk"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-mmc_mclk: mmc_mclk {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-mclk";
-	clocks = <&mmc_pclk>;
-};
-
-mmcsd: mmcsd@c0001000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	clocks = <&mmc_pclk>, <&mmc_mclk>;
-	clock-names = "apb_pclk", "mclk";
-	(...)
-};