summaryrefslogtreecommitdiff
path: root/Documentation/admin-guide/kernel-parameters.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt153
1 files changed, 135 insertions, 18 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index d246ad46d845..f1eeba73d931 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3095,6 +3095,10 @@
and gids from such clients. This is intended to ease
migration from NFSv2/v3.
+ nmi_backtrace.backtrace_idle [KNL]
+ Dump stacks even of idle CPUs in response to an
+ NMI stack-backtrace request.
+
nmi_debug= [KNL,SH] Specify one or more actions to take
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
@@ -4174,46 +4178,55 @@
This wake_up() will be accompanied by a
WARN_ONCE() splat and an ftrace_dump().
+ rcutree.rcu_unlock_delay= [KNL]
+ In CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels,
+ this specifies an rcu_read_unlock()-time delay
+ in microseconds. This defaults to zero.
+ Larger delays increase the probability of
+ catching RCU pointer leaks, that is, buggy use
+ of RCU-protected pointers after the relevant
+ rcu_read_unlock() has completed.
+
rcutree.sysrq_rcu= [KNL]
Commandeer a sysrq key to dump out Tree RCU's
rcu_node tree with an eye towards determining
why a new grace period has not yet started.
- rcuperf.gp_async= [KNL]
+ rcuscale.gp_async= [KNL]
Measure performance of asynchronous
grace-period primitives such as call_rcu().
- rcuperf.gp_async_max= [KNL]
+ rcuscale.gp_async_max= [KNL]
Specify the maximum number of outstanding
callbacks per writer thread. When a writer
thread exceeds this limit, it invokes the
corresponding flavor of rcu_barrier() to allow
previously posted callbacks to drain.
- rcuperf.gp_exp= [KNL]
+ rcuscale.gp_exp= [KNL]
Measure performance of expedited synchronous
grace-period primitives.
- rcuperf.holdoff= [KNL]
+ rcuscale.holdoff= [KNL]
Set test-start holdoff period. The purpose of
this parameter is to delay the start of the
test until boot completes in order to avoid
interference.
- rcuperf.kfree_rcu_test= [KNL]
+ rcuscale.kfree_rcu_test= [KNL]
Set to measure performance of kfree_rcu() flooding.
- rcuperf.kfree_nthreads= [KNL]
+ rcuscale.kfree_nthreads= [KNL]
The number of threads running loops of kfree_rcu().
- rcuperf.kfree_alloc_num= [KNL]
+ rcuscale.kfree_alloc_num= [KNL]
Number of allocations and frees done in an iteration.
- rcuperf.kfree_loops= [KNL]
- Number of loops doing rcuperf.kfree_alloc_num number
+ rcuscale.kfree_loops= [KNL]
+ Number of loops doing rcuscale.kfree_alloc_num number
of allocations and frees.
- rcuperf.nreaders= [KNL]
+ rcuscale.nreaders= [KNL]
Set number of RCU readers. The value -1 selects
N, where N is the number of CPUs. A value
"n" less than -1 selects N-n+1, where N is again
@@ -4222,23 +4235,23 @@
A value of "n" less than or equal to -N selects
a single reader.
- rcuperf.nwriters= [KNL]
+ rcuscale.nwriters= [KNL]
Set number of RCU writers. The values operate
- the same as for rcuperf.nreaders.
+ the same as for rcuscale.nreaders.
N, where N is the number of CPUs
- rcuperf.perf_type= [KNL]
+ rcuscale.perf_type= [KNL]
Specify the RCU implementation to test.
- rcuperf.shutdown= [KNL]
+ rcuscale.shutdown= [KNL]
Shut the system down after performance tests
complete. This is useful for hands-off automated
testing.
- rcuperf.verbose= [KNL]
+ rcuscale.verbose= [KNL]
Enable additional printk() statements.
- rcuperf.writer_holdoff= [KNL]
+ rcuscale.writer_holdoff= [KNL]
Write-side holdoff between grace periods,
in microseconds. The default of zero says
no holdoff.
@@ -4291,6 +4304,18 @@
are zero, rcutorture acts as if is interpreted
they are all non-zero.
+ rcutorture.irqreader= [KNL]
+ Run RCU readers from irq handlers, or, more
+ accurately, from a timer handler. Not all RCU
+ flavors take kindly to this sort of thing.
+
+ rcutorture.leakpointer= [KNL]
+ Leak an RCU-protected pointer out of the reader.
+ This can of course result in splats, and is
+ intended to test the ability of things like
+ CONFIG_RCU_STRICT_GRACE_PERIOD=y to detect
+ such leaks.
+
rcutorture.n_barrier_cbs= [KNL]
Set callbacks/threads for rcu_barrier() testing.
@@ -4512,8 +4537,8 @@
refscale.shutdown= [KNL]
Shut down the system at the end of the performance
test. This defaults to 1 (shut it down) when
- rcuperf is built into the kernel and to 0 (leave
- it running) when rcuperf is built as a module.
+ refscale is built into the kernel and to 0 (leave
+ it running) when refscale is built as a module.
refscale.verbose= [KNL]
Enable additional printk() statements.
@@ -4659,6 +4684,98 @@
Format: integer between 0 and 10
Default is 0.
+ scftorture.holdoff= [KNL]
+ Number of seconds to hold off before starting
+ test. Defaults to zero for module insertion and
+ to 10 seconds for built-in smp_call_function()
+ tests.
+
+ scftorture.longwait= [KNL]
+ Request ridiculously long waits randomly selected
+ up to the chosen limit in seconds. Zero (the
+ default) disables this feature. Please note
+ that requesting even small non-zero numbers of
+ seconds can result in RCU CPU stall warnings,
+ softlockup complaints, and so on.
+
+ scftorture.nthreads= [KNL]
+ Number of kthreads to spawn to invoke the
+ smp_call_function() family of functions.
+ The default of -1 specifies a number of kthreads
+ equal to the number of CPUs.
+
+ scftorture.onoff_holdoff= [KNL]
+ Number seconds to wait after the start of the
+ test before initiating CPU-hotplug operations.
+
+ scftorture.onoff_interval= [KNL]
+ Number seconds to wait between successive
+ CPU-hotplug operations. Specifying zero (which
+ is the default) disables CPU-hotplug operations.
+
+ scftorture.shutdown_secs= [KNL]
+ The number of seconds following the start of the
+ test after which to shut down the system. The
+ default of zero avoids shutting down the system.
+ Non-zero values are useful for automated tests.
+
+ scftorture.stat_interval= [KNL]
+ The number of seconds between outputting the
+ current test statistics to the console. A value
+ of zero disables statistics output.
+
+ scftorture.stutter_cpus= [KNL]
+ The number of jiffies to wait between each change
+ to the set of CPUs under test.
+
+ scftorture.use_cpus_read_lock= [KNL]
+ Use use_cpus_read_lock() instead of the default
+ preempt_disable() to disable CPU hotplug
+ while invoking one of the smp_call_function*()
+ functions.
+
+ scftorture.verbose= [KNL]
+ Enable additional printk() statements.
+
+ scftorture.weight_single= [KNL]
+ The probability weighting to use for the
+ smp_call_function_single() function with a zero
+ "wait" parameter. A value of -1 selects the
+ default if all other weights are -1. However,
+ if at least one weight has some other value, a
+ value of -1 will instead select a weight of zero.
+
+ scftorture.weight_single_wait= [KNL]
+ The probability weighting to use for the
+ smp_call_function_single() function with a
+ non-zero "wait" parameter. See weight_single.
+
+ scftorture.weight_many= [KNL]
+ The probability weighting to use for the
+ smp_call_function_many() function with a zero
+ "wait" parameter. See weight_single.
+ Note well that setting a high probability for
+ this weighting can place serious IPI load
+ on the system.
+
+ scftorture.weight_many_wait= [KNL]
+ The probability weighting to use for the
+ smp_call_function_many() function with a
+ non-zero "wait" parameter. See weight_single
+ and weight_many.
+
+ scftorture.weight_all= [KNL]
+ The probability weighting to use for the
+ smp_call_function_all() function with a zero
+ "wait" parameter. See weight_single and
+ weight_many.
+
+ scftorture.weight_all_wait= [KNL]
+ The probability weighting to use for the
+ smp_call_function_all() function with a
+ non-zero "wait" parameter. See weight_single
+ and weight_many.
+
skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate
xtime_lock contention on larger systems, and/or RCU lock
contention on all systems with CONFIG_MAXSMP set.