diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu new file mode 100644 index 000000000000..307a55f599cb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -0,0 +1,113 @@ +What: /sys/bus/i2c/devices/<mcu_device>/board_revision +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains board revision number. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %u. + +What: /sys/bus/i2c/devices/<mcu_device>/first_mac_address +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains device first MAC address. Each Turris Omnia is + allocated 3 MAC addresses. The two additional addresses are + computed from the first one by incrementing it. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %pM. + +What: /sys/bus/i2c/devices/<mcu_device>/front_button_mode +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) The front button on the Turris Omnia router can be + configured either to change the intensity of all the LEDs on the + front panel, or to send the press event to the CPU as an + interrupt. + + This file switches between these two modes: + - "mcu" makes the button press event be handled by the MCU to + change the LEDs panel intensity. + - "cpu" makes the button press event be handled by the CPU. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/front_button_poweron +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) Newer versions of the microcontroller firmware of the + Turris Omnia router support powering off the router into true + low power mode. The router can be powered on by pressing the + front button. + + This file configures whether front button power on is enabled. + + This file is present only if the power off feature is supported + by the firmware. + + Format: %i. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_features +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Newer versions of the microcontroller firmware report the + features they support. These can be read from this file. If the + MCU firmware is too old, this file reads 0x0. + + Format: 0x%x. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the version hash (commit hash) of the application + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the version hash (commit hash) of the bootloader + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/mcu_type +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/reset_selector +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the selected factory reset level, determined by + how long the rear reset button was held by the user during board + reset. + + Format: %i. + +What: /sys/bus/i2c/devices/<mcu_device>/serial_number +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the 64-bit board serial number in hexadecimal + format. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %016X. |