diff options
32 files changed, 7693 insertions, 271 deletions
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 6ac98b3b5f57..c9f5c0caf8a9 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -7,6 +7,7 @@ Required properties: * "fsl,imx6sl-usbphy" for imx6sl * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt @@ -23,7 +24,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@20c9000 { +usbphy1: usb-phy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt new file mode 100644 index 000000000000..b7dc606d37b5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt @@ -0,0 +1,45 @@ +Binding for the Cadence USBSS-DRD controller + +Required properties: + - reg: Physical base address and size of the controller's register areas. + Controller has 3 different regions: + - HOST registers area + - DEVICE registers area + - OTG/DRD registers area + - reg-names - register memory area names: + "xhci" - for HOST registers space + "dev" - for DEVICE registers space + "otg" - for OTG/DRD registers space + - compatible: Should contain: "cdns,usb3" + - interrupts: Interrupts used by cdns3 controller: + "host" - interrupt used by XHCI driver. + "peripheral" - interrupt used by device driver + "otg" - interrupt used by DRD/OTG part of driver + +Optional properties: + - maximum-speed : valid arguments are "super-speed", "high-speed" and + "full-speed"; refer to usb/generic.txt + - dr_mode: Should be one of "host", "peripheral" or "otg". + - phys: reference to the USB PHY + - phy-names: from the *Generic PHY* bindings; + Supported names are: + - cdns3,usb2-phy + - cdns3,usb3-phy + + - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints + buffers expressed in KB + +Example: + usb@f3000000 { + compatible = "cdns,usb3"; + interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + reg = <0xf3000000 0x10000>, /* memory area for HOST registers */ + <0xf3010000 0x10000>, /* memory area for DEVICE registers */ + <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */ + reg-names = "xhci", "dev", "otg"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy"; + }; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 94573fb68304..42a5b1ac5aea 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -113,6 +113,8 @@ source "drivers/usb/usbip/Kconfig" endif +source "drivers/usb/cdns3/Kconfig" + source "drivers/usb/mtu3/Kconfig" source "drivers/usb/musb/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index ecc2de1ffaae..09fc9f2448ce 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_DWC2) += dwc2/ obj-$(CONFIG_USB_ISP1760) += isp1760/ +obj-$(CONFIG_USB_CDNS3) += cdns3/ + obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_USB_MTU3) += mtu3/ diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig new file mode 100644 index 000000000000..118ec91c4c70 --- /dev/null +++ b/drivers/usb/cdns3/Kconfig @@ -0,0 +1,44 @@ +config USB_CDNS3 + tristate "Cadence USB3 Dual-Role Controller" + depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA + help + Say Y here if your system has a Cadence USB3 dual-role controller. + It supports: dual-role switch, Host-only, and Peripheral-only. + + If you choose to build this driver is a dynamically linked + as module, the module will be called cdns3.ko. + +if USB_CDNS3 + +config USB_CDNS3_GADGET + bool "Cadence USB3 device controller" + depends on USB_GADGET + help + Say Y here to enable device controller functionality of the + Cadence USBSS-DEV driver. + + This controller supports FF, HS and SS mode. It doesn't support + LS and SSP mode. + +config USB_CDNS3_HOST + bool "Cadence USB3 host controller" + depends on USB_XHCI_HCD + help + Say Y here to enable host controller functionality of the + Cadence driver. + + Host controller is compliant with XHCI so it will use + standard XHCI driver. + +config USB_CDNS3_PCI_WRAP + tristate "Cadence USB3 support on PCIe-based platforms" + depends on USB_PCI && ACPI + default USB_CDNS3 + help + If you're using the USBSS Core IP with a PCIe, please say + 'Y' or 'M' here. + + If you choose to build this driver as module it will + be dynamically linked and module will be called cdns3-pci.ko + +endif diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile new file mode 100644 index 000000000000..46c27b94b94b --- /dev/null +++ b/drivers/usb/cdns3/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +# define_trace.h needs to know how to find our header +CFLAGS_trace.o := -I$(src) + +cdns3-y := core.o drd.o + +obj-$(CONFIG_USB_CDNS3) += cdns3.o +ifneq ($(CONFIG_DEBUG_FS),) + cdns3-y += debugfs.o +endif + +cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o trace.o +cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o +obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c new file mode 100644 index 000000000000..65b61ea246b1 --- /dev/null +++ b/drivers/usb/cdns3/cdns3-pci-wrap.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS PCI Glue driver + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +struct cdns3_wrap { + struct platform_device *plat_dev; + struct pci_dev *hg_dev; + struct resource dev_res[6]; +}; + +#define RES_IRQ_HOST_ID 0 +#define RES_IRQ_PERIPHERAL_ID 1 +#define RES_IRQ_OTG_ID 2 +#define RES_HOST_ID 3 +#define RES_DEV_ID 4 +#define RES_DRD_ID 5 + +#define PCI_BAR_HOST 0 +#define PCI_BAR_DEV 2 +#define PCI_BAR_OTG 4 + +#define PCI_DEV_FN_HOST_DEVICE 0 +#define PCI_DEV_FN_OTG 1 + +#define PCI_DRIVER_NAME "cdns3-pci-usbss" +#define PLAT_DRIVER_NAME "cdns-usb3" + +#define CDNS_VENDOR_ID 0x17cd +#define CDNS_DEVICE_ID 0x0100 + +static int cdns3_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct platform_device_info plat_info; + struct cdns3_wrap *wrap; + struct resource *res; + int err; + + /* + * for GADGET/HOST PCI (devfn) function number is 0, + * for OTG PCI (devfn) function number is 1 + */ + if (!id || pdev->devfn != PCI_DEV_FN_HOST_DEVICE) + return -EINVAL; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err); + return err; + } + + pci_set_master(pdev); + wrap = devm_kzalloc(&pdev->dev, sizeof(*wrap), GFP_KERNEL); + if (!wrap) { + pci_disable_device(pdev); + return -ENOMEM; + } + + /* function 0: host(BAR_0) + device(BAR_1) + otg(BAR_2)). */ + dev_dbg(&pdev->dev, "Initialize Device resources\n"); + res = wrap->dev_res; + + res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV); + res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV); + res[RES_DEV_ID].name = "dev"; + res[RES_DEV_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n", + &res[RES_DEV_ID].start); + + res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST); + res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST); + res[RES_HOST_ID].name = "xhci"; + res[RES_HOST_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n", + &res[RES_HOST_ID].start); + + res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG); + res[RES_DRD_ID].end = pci_resource_end(pdev, PCI_BAR_OTG); + res[RES_DRD_ID].name = "otg"; + res[RES_DRD_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n", + &res[RES_DRD_ID].start); + + /* Interrupt for XHCI */ + wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_HOST_ID].name = "host"; + wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ; + + /* Interrupt device. It's the same as for HOST. */ + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral"; + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ; + + /* Interrupt for OTG/DRD. */ + wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_OTG_ID].name = "otg"; + wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ; + + /* set up platform device info */ + memset(&plat_info, 0, sizeof(plat_info)); + plat_info.parent = &pdev->dev; + plat_info.fwnode = pdev->dev.fwnode; + plat_info.name = PLAT_DRIVER_NAME; + plat_info.id = pdev->devfn; + plat_info.res = wrap->dev_res; + plat_info.num_res = ARRAY_SIZE(wrap->dev_res); + plat_info.dma_mask = pdev->dma_mask; + + /* register platform device */ + wrap->plat_dev = platform_device_register_full(&plat_info); + if (IS_ERR(wrap->plat_dev)) { + pci_disable_device(pdev); + return PTR_ERR(wrap->plat_dev); + } + + pci_set_drvdata(pdev, wrap); + + return err; +} + +static void cdns3_pci_remove(struct pci_dev *pdev) +{ + struct cdns3_wrap *wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev); + + platform_device_unregister(wrap->plat_dev); +} + +static const struct pci_device_id cdns3_pci_ids[] = { + { PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), }, + { 0, } +}; + +static struct pci_driver cdns3_pci_driver = { + .name = PCI_DRIVER_NAME, + .id_table = cdns3_pci_ids, + .probe = cdns3_pci_probe, + .remove = cdns3_pci_remove, +}; + +module_pci_driver(cdns3_pci_driver); +MODULE_DEVICE_TABLE(pci, cdns3_pci_ids); + +MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USBSS PCI wrapperr"); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c new file mode 100644 index 000000000000..ddc73f1c87c5 --- /dev/null +++ b/drivers/usb/cdns3/core.c @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver. + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2017-2018 NXP + * Copyright (C) 2019 Texas Instruments + * + * Author: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + * Roger Quadros <rogerq@ti.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> + +#include "gadget.h" +#include "core.h" +#include "host-export.h" +#include "gadget-export.h" +#include "drd.h" +#include "debug.h" + +/** + * cdns3_handshake - spin reading until handshake completes or fails + * @ptr: address of device controller register to be read + * @mask: bits to look at in result of read + * @done: value of those bits when handshake succeeds + * @usec: timeout in microseconds + * + * Returns negative errno, or zero on success + * + * Success happens when the "mask" bits have the specified value (hardware + * handshake done). There are two failure modes: "usec" have passed (major + * hardware flakeout), or the register reads as all-ones (hardware removed). + */ +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec) +{ + u32 result; + + do { + result = readl(ptr); + if (result == ~(u32)0) /* card removed */ + return -ENODEV; + + result &= mask; + if (result == done) + return 0; + + udelay(1); + usec--; + } while (usec > 0); + + return -ETIMEDOUT; +} + +static inline +struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns) +{ + WARN_ON(cdns->role >= CDNS3_ROLE_END || !cdns->roles[cdns->role]); + return cdns->roles[cdns->role]; +} + +static int cdns3_role_start(struct cdns3 *cdns, enum cdns3_roles role) +{ + int ret; + + if (WARN_ON(role >= CDNS3_ROLE_END)) + return 0; + + if (!cdns->roles[role]) + return -ENXIO; + + if (cdns->roles[role]->state == CDNS3_ROLE_STATE_ACTIVE) + return 0; + + mutex_lock(&cdns->mutex); + cdns->role = role; + ret = cdns->roles[role]->start(cdns); + if (!ret) + cdns->roles[role]->state = CDNS3_ROLE_STATE_ACTIVE; + mutex_unlock(&cdns->mutex); + return ret; +} + +void cdns3_role_stop(struct cdns3 *cdns) +{ + enum cdns3_roles role = cdns->role; + + if (role >= CDNS3_ROLE_END) { + WARN_ON(role > CDNS3_ROLE_END); + return; + } + + if (cdns->roles[role]->state == CDNS3_ROLE_STATE_INACTIVE) + return; + + mutex_lock(&cdns->mutex); + cdns->roles[role]->stop(cdns); + cdns->roles[role]->state = CDNS3_ROLE_STATE_INACTIVE; + mutex_unlock(&cdns->mutex); +} + +static void cdns3_exit_roles(struct cdns3 *cdns) +{ + cdns3_role_stop(cdns); + cdns3_drd_exit(cdns); +} + +enum cdns3_roles cdsn3_get_real_role(struct cdns3 *cdns); + +static int cdns3_idle_role_start(struct cdns3 *cnds) +{ /* Hold PHY in RESET */ + return 0; +} + +static void cdns3_idle_role_stop(struct cdns3 *cnds) +{ + /* Program Lane swap and bring PHY out of RESET */ +} + +static int cdns3_idle_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = cdns3_idle_role_start; + rdrv->stop = cdns3_idle_role_stop; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->suspend = NULL; + rdrv->resume = NULL; + rdrv->name = "idle"; + + cdns->roles[CDNS3_ROLE_IDLE] = rdrv; + + return 0; +} + +/** + * cdns3_core_init_role - initialize role of operation + * @cdns: Pointer to cdns3 structure + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_core_init_role(struct cdns3 *cdns) +{ + struct device *dev = cdns->dev; + enum usb_dr_mode best_dr_mode; + enum usb_dr_mode dr_mode; + int ret = 0; + + dr_mode = usb_get_dr_mode(dev); + cdns->role = CDNS3_ROLE_END; + + /* + * If driver can't read mode by means of usb_get_dr_mode function then + * chooses mode according with Kernel configuration. This setting + * can be restricted later depending on strap pin configuration. + */ + if (dr_mode == USB_DR_MODE_UNKNOWN) { + if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) && + IS_ENABLED(CONFIG_USB_CDNS3_GADGET)) + dr_mode = USB_DR_MODE_OTG; + else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST)) + dr_mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET)) + dr_mode = USB_DR_MODE_PERIPHERAL; + } + + /* + * At this point cdns->dr_mode contains strap configuration. + * Driver try update this setting considering kernel configuration + */ + best_dr_mode = cdns->dr_mode; + + ret = cdns3_idle_init(cdns); + if (ret) + return ret; + + if (dr_mode == USB_DR_MODE_OTG) { + best_dr_mode = cdns->dr_mode; + } else if (cdns->dr_mode == USB_DR_MODE_OTG) { + best_dr_mode = dr_mode; + } else if (cdns->dr_mode != dr_mode) { + dev_err(dev, "Incorrect DRD configuration\n"); + return -EINVAL; + } + + dr_mode = best_dr_mode; + + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { + ret = cdns3_host_init(cdns); + if (ret) { + dev_err(dev, "Host initialization failed with %d\n", + ret); + goto err; + } + } + + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { + ret = cdns3_gadget_init(cdns); + if (ret) { + dev_err(dev, "Device initialization failed with %d\n", + ret); + goto err; + } + } + + cdns->desired_dr_mode = dr_mode; + cdns->dr_mode = dr_mode; + + /* + * desired_dr_mode might have changed so we need to update + * the controller configuration"? + */ + ret = cdns3_drd_update_mode(cdns); + if (ret) + goto err; + + cdns->role = cdsn3_get_real_role(cdns); + + ret = cdns3_role_start(cdns, cdns->role); + if (ret) { + dev_err(dev, "can't start %s role\n", + cdns3_get_current_role_driver(cdns)->name); + goto err; + } + + return ret; +err: + cdns3_exit_roles(cdns); + return ret; +} + +/** + * cdsn3_get_real_role - get real role of controller based on hardware settings. + * @cdns: Pointer to cdns3 structure + * + * Returns role + */ +enum cdns3_roles cdsn3_get_real_role(struct cdns3 *cdns) +{ + enum cdns3_roles role; + int id, vbus; + + if (cdns->current_dr_mode != USB_DR_MODE_OTG) + goto not_otg; + + id = cdns3_get_id(cdns); + vbus = cdns3_get_vbus(cdns); + + /* + * Role change state machine + * Inputs: ID, VBUS + * Previous state: cdns->role + * Next state: role + */ + role = cdns->role; + + switch (role) { + case CDNS3_ROLE_IDLE: /* from IDLE, we can change to HOST or GADGET */ + if (!id) + role = CDNS3_ROLE_HOST; + else if (vbus) + role = CDNS3_ROLE_GADGET; + break; + case CDNS3_ROLE_HOST: /* from HOST, we can only change to IDLE */ + if (id) + role = CDNS3_ROLE_IDLE; + break; + case CDNS3_ROLE_GADGET: /* from GADGET, we can only change to IDLE */ + if (!vbus) + role = CDNS3_ROLE_IDLE; + break; + case CDNS3_ROLE_END: /* only at initialization, move to IDLE */ + role = CDNS3_ROLE_IDLE; + break; + } + + dev_dbg(cdns->dev, "role %d -> %d\n", cdns->role, role); + + return role; + +not_otg: + if (cdns3_is_host(cdns)) + role = CDNS3_ROLE_HOST; + if (cdns3_is_device(cdns)) + role = CDNS3_ROLE_GADGET; + + return role; +} + +/** + * cdns3_role_switch - work queue handler for role switch + * + * @work: work queue item structure + * + * Handles below events: + * - Role switch for dual-role devices + * - CDNS3_ROLE_GADGET <--> CDNS3_ROLE_END for peripheral-only devices + */ +static void cdns3_role_switch(struct work_struct *work) +{ + enum cdns3_roles role = CDNS3_ROLE_END; + struct cdns3_role_driver *role_drv; + enum cdns3_roles current_role; + struct cdns3 *cdns; + int ret = 0; + + cdns = container_of(work, struct cdns3, role_switch_wq); + + pm_runtime_get_sync(cdns->dev); + + role = cdsn3_get_real_role(cdns); + + role_drv = cdns3_get_current_role_driver(cdns); + + /* Disable current role if requested from debugfs */ + if (cdns->debug_disable && role_drv->state == CDNS3_ROLE_STATE_ACTIVE) { + cdns3_role_stop(cdns); + goto exit; + } + + /* Do nothing if nothing changed */ + if (cdns->role == role && role_drv->state == CDNS3_ROLE_STATE_ACTIVE) + goto exit; + + cdns3_role_stop(cdns); + + role = cdsn3_get_real_role(cdns); + + current_role = cdns->role; + dev_dbg(cdns->dev, "Switching role"); + + ret = cdns3_role_start(cdns, role); + if (ret) { + /* Back to current role */ + dev_err(cdns->dev, "set %d has failed, back to %d\n", + role, current_role); + ret = cdns3_role_start(cdns, current_role); + if (ret) + dev_err(cdns->dev, "back to %d failed too\n", + current_role); + } +exit: + pm_runtime_put_sync(cdns->dev); +} + +/** + * cdns3_probe - probe for cdns3 core device + * @pdev: Pointer to cdns3 core platform device + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct cdns3 *cdns; + void __iomem *regs; + int ret; + + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, "error setting dma mask: %d\n", ret); + return -ENODEV; + } + + cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL); + if (!cdns) + return -ENOMEM; + + cdns->dev = dev; + + platform_set_drvdata(pdev, cdns); + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "host"); + if (!res) { + dev_err(dev, "missing host IRQ\n"); + return -ENODEV; + } + + cdns->xhci_res[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci"); + if (!res) { + dev_err(dev, "couldn't get xhci resource\n"); + return -ENXIO; + } + + cdns->xhci_res[1] = *res; + + cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral"); + if (cdns->dev_irq == -EPROBE_DEFER) + return cdns->dev_irq; + + if (cdns->dev_irq < 0) + dev_err(dev, "couldn't get peripheral irq\n"); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dev"); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) { + dev_err(dev, "couldn't iomap dev resource\n"); + return PTR_ERR(regs); + } + cdns->dev_regs = regs; + + cdns->otg_irq = platform_get_irq_byname(pdev, "otg"); + if (cdns->otg_irq == -EPROBE_DEFER) + return cdns->otg_irq; + + if (cdns->otg_irq < 0) { + dev_err(dev, "couldn't get otg irq\n"); + return cdns->otg_irq; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg"); + if (!res) { + dev_err(dev, "couldn't get otg resource\n"); + return -ENXIO; + } + + cdns->otg_res = *res; + + mutex_init(&cdns->mutex); + + cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy"); + if (IS_ERR(cdns->usb2_phy)) + return PTR_ERR(cdns->usb2_phy); + + phy_init(cdns->usb2_phy); + ret = phy_init(cdns->usb2_phy); + if (ret) + return ret; + + cdns->usb3_phy = devm_phy_optional_get(dev, "cdns3,usb3-phy"); + if (IS_ERR(cdns->usb3_phy)) + return PTR_ERR(cdns->usb3_phy); + + phy_init(cdns->usb3_phy); + ret = phy_init(cdns->usb3_phy); + if (ret) + return ret; + + ret = phy_power_on(cdns->usb2_phy); + if (ret) + return ret; + + ret = phy_power_on(cdns->usb3_phy); + if (ret) + goto err1; + + INIT_WORK(&cdns->role_switch_wq, cdns3_role_switch); + + ret = cdns3_drd_init(cdns); + if (ret) + goto err2; + + ret = cdns3_core_init_role(cdns); + if (ret) + goto err2; + + cdns3_debugfs_init(cdns); + device_set_wakeup_capable(dev, true); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + /* + * The controller needs less time between bus and controller suspend, + * and we also needs a small delay to avoid frequently entering low + * power mode. + */ + pm_runtime_set_autosuspend_delay(dev, 20); + pm_runtime_mark_last_busy(dev); + pm_runtime_use_autosuspend(dev); + dev_dbg(dev, "Cadence USB3 core: probe succeed\n"); + + return 0; + +err2: + phy_power_off(cdns->usb3_phy); + +err1: + phy_power_off(cdns->usb2_phy); + phy_exit(cdns->usb2_phy); + phy_exit(cdns->usb3_phy); + + return ret; +} + +/** + * cdns3_remove - unbind drd driver and clean up + * @pdev: Pointer to Linux platform device + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_remove(struct platform_device *pdev) +{ + struct cdns3 *cdns = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + cdns3_debugfs_exit(cdns); + cdns3_exit_roles(cdns); + phy_power_off(cdns->usb2_phy); + phy_power_off(cdns->usb3_phy); + phy_exit(cdns->usb2_phy); + phy_exit(cdns->usb3_phy); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id of_cdns3_match[] = { + { .compatible = "cdns,usb3" }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cdns3_match); +#endif + +static struct platform_driver cdns3_driver = { + .probe = cdns3_probe, + .remove = cdns3_remove, + .driver = { + .name = "cdns-usb3", + .of_match_table = of_match_ptr(of_cdns3_match), + }, +}; + +module_platform_driver(cdns3_driver); + +MODULE_ALIAS("platform:cdns3"); +MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver"); diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h new file mode 100644 index 000000000000..be95696ab17e --- /dev/null +++ b/drivers/usb/cdns3/core.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Header File. + * + * Copyright (C) 2017-2018 NXP + * Copyright (C) 2018-2019 Cadence. + * + * Authors: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + */ +#include <linux/usb/otg.h> + +#ifndef __LINUX_CDNS3_CORE_H +#define __LINUX_CDNS3_CORE_H + +struct cdns3; +enum cdns3_roles { + CDNS3_ROLE_IDLE = 0, + CDNS3_ROLE_HOST, + CDNS3_ROLE_GADGET, + CDNS3_ROLE_END, +}; + +/** + * struct cdns3_role_driver - host/gadget role driver + * @start: start this role + * @stop: stop this role + * @suspend: suspend callback for this role + * @resume: resume callback for this role + * @irq: irq handler for this role + * @name: role name string (host/gadget) + * @state: current state + */ +struct cdns3_role_driver { + int (*start)(struct cdns3 *cdns); + void (*stop)(struct cdns3 *cdns); + int (*suspend)(struct cdns3 *cdns, bool do_wakeup); + int (*resume)(struct cdns3 *cdns, bool hibernated); + const char *name; +#define CDNS3_ROLE_STATE_INACTIVE 0 +#define CDNS3_ROLE_STATE_ACTIVE 1 + int state; +}; + +#define CDNS3_XHCI_RESOURCES_NUM 2 +/** + * struct cdns3 - Representation of Cadence USB3 DRD controller. + * @dev: pointer to Cadence device struct + * @xhci_regs: pointer to base of xhci registers + * @xhci_res: the resource for xhci + * @dev_regs: pointer to base of dev registers + * @otg_res: the resource for otg + * @otg_v0_regs: pointer to base of v0 otg registers + * @otg_v1_regs: pointer to base of v1 otg registers + * @otg_regs: pointer to base of otg registers + * @otg_irq: irq number for otg controller + * @dev_irq: irq number for device controller + * @roles: array of supported roles for this controller + * @role: current role + * @host_dev: the child host device pointer for cdns3 core + * @gadget_dev: the child gadget device pointer for cdns3 core + * @usb2_phy: pointer to USB2 PHY + * @usb3_phy: pointer to USB3 PHY + * @role_switch_wq: work queue item for role switch + * @wakeup_int: the wakeup interrupt + * @mutex: the mutex for concurrent code at driver + * @dr_mode: supported mode of operation it can be only Host, only Device + * or OTG mode that allow to switch between Device and Host mode. + * This field based on firmware setting, kernel configuration + * and hardware configuration. + * @current_dr_mode: current mode of operation when in dual-role mode + * @desired_dr_mode: desired mode of operation when in dual-role mode. + * This value can be changed during runtime. + * Available options depends on dr_mode: + * dr_mode | desired_dr_mode and current_dr_mode + * ---------------------------------------------------------------- + * USB_DR_MODE_HOST | only USB_DR_MODE_HOST + * USB_DR_MODE_PERIPHERAL | only USB_DR_MODE_PERIPHERAL + * USB_DR_MODE_OTG | USB_DR_MODE_OTG or USB_DR_MODE_HOST or + * | USB_DR_MODE_PERIPHERAL + * Desired_dr_role can be changed by means of debugfs. + * @root: debugfs root folder pointer + * @debug_disable: + */ +struct cdns3 { + struct device *dev; + void __iomem *xhci_regs; + struct resource xhci_res[CDNS3_XHCI_RESOURCES_NUM]; + struct cdns3_usb_regs __iomem *dev_regs; + + struct resource otg_res; + struct cdns3_otg_legacy_regs *otg_v0_regs; + struct cdns3_otg_regs *otg_v1_regs; + struct cdns3_otg_common_regs *otg_regs; +#define CDNS3_CONTROLLER_V0 0 +#define CDNS3_CONTROLLER_V1 1 + u32 version; + + int otg_irq; + int dev_irq; + struct cdns3_role_driver *roles[CDNS3_ROLE_END]; + enum cdns3_roles role; + struct platform_device *host_dev; + struct cdns3_device *gadget_dev; + struct phy *usb2_phy; + struct phy *usb3_phy; + struct work_struct role_switch_wq; + int wakeup_int:1; + /* mutext used in workqueue*/ + struct mutex mutex; + enum usb_dr_mode dr_mode; + enum usb_dr_mode current_dr_mode; + enum usb_dr_mode desired_dr_mode; + struct dentry *root; + int debug_disable:1; +}; + +void cdns3_role_stop(struct cdns3 *cdns); +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec); + +#endif /* __LINUX_CDNS3_CORE_H */ diff --git a/drivers/usb/cdns3/debug.h b/drivers/usb/cdns3/debug.h new file mode 100644 index 000000000000..65c3d8a6cd62 --- /dev/null +++ b/drivers/usb/cdns3/debug.h @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver. + * Debug header file. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ +#ifndef __LINUX_CDNS3_DEBUG +#define __LINUX_CDNS3_DEBUG + +#include "core.h" + +static inline char *cdns3_decode_usb_irq(char *str, + enum usb_device_speed speed, + u32 usb_ists) +{ + int ret; + + ret = sprintf(str, "IRQ %08x = ", usb_ists); + + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) { + ret += sprintf(str + ret, "Connection %s\n", + usb_speed_string(speed)); + } + if (usb_ists & USB_ISTS_DIS2I || usb_ists & USB_ISTS_DISI) + ret += sprintf(str + ret, "Disconnection "); + if (usb_ists & USB_ISTS_L2ENTI) + ret += sprintf(str + ret, "suspended "); + if (usb_ists & USB_ISTS_L1ENTI) + ret += sprintf(str + ret, "L1 enter "); + if (usb_ists & USB_ISTS_L1EXTI) + ret += sprintf(str + ret, "L1 exit "); + if (usb_ists & USB_ISTS_L2ENTI) + ret += sprintf(str + ret, "L2 enter "); + if (usb_ists & USB_ISTS_L2EXTI) + ret += sprintf(str + ret, "L2 exit "); + if (usb_ists & USB_ISTS_U3EXTI) + ret += sprintf(str + ret, "U3 exit "); + if (usb_ists & USB_ISTS_UWRESI) + ret += sprintf(str + ret, "Warm Reset "); + if (usb_ists & USB_ISTS_UHRESI) + ret += sprintf(str + ret, "Hot Reset "); + if (usb_ists & USB_ISTS_U2RESI) + ret += sprintf(str + ret, "Reset"); + + return str; +} + +static inline char *cdns3_decode_ep_irq(char *str, + u32 ep_sts, + const char *ep_name) +{ + int ret; + + ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts); + + if (ep_sts & EP_STS_SETUP) + ret += sprintf(str + ret, "SETUP "); + if (ep_sts & EP_STS_IOC) + ret += sprintf(str + ret, "IOC "); + if (ep_sts & EP_STS_ISP) + ret += sprintf(str + ret, "ISP "); + if (ep_sts & EP_STS_DESCMIS) + ret += sprintf(str + ret, "DESCMIS "); + if (ep_sts & EP_STS_STREAMR) + ret += sprintf(str + ret, "STREAMR "); + if (ep_sts & EP_STS_MD_EXIT) + ret += sprintf(str + ret, "MD_EXIT "); + if (ep_sts & EP_STS_TRBERR) + ret += sprintf(str + ret, "TRBERR "); + if (ep_sts & EP_STS_NRDY) + ret += sprintf(str + ret, "NRDY "); + if (ep_sts & EP_STS_PRIME) + ret += sprintf(str + ret, "PRIME "); + if (ep_sts & EP_STS_SIDERR) + ret += sprintf(str + ret, "SIDERRT "); + if (ep_sts & EP_STS_OUTSMM) + ret += sprintf(str + ret, "OUTSMM "); + if (ep_sts & EP_STS_ISOERR) + ret += sprintf(str + ret, "ISOERR "); + if (ep_sts & EP_STS_IOT) + ret += sprintf(str + ret, "IOT "); + + return str; +} + +static inline char *cdns3_decode_epx_irq(char *str, + char *ep_name, + u32 ep_sts) +{ + return cdns3_decode_ep_irq(str, ep_sts, ep_name); +} + +static inline char *cdns3_decode_ep0_irq(char *str, + int dir, + u32 ep_sts) +{ + return cdns3_decode_ep_irq(str, ep_sts, + dir ? "ep0IN" : "ep0OUT"); +} + +/** + * Debug a transfer ring. + * + * Prints out all TRBs in the endpoint ring, even those after the Link TRB. + *. + */ +static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *ring, char *str) +{ + dma_addr_t addr = priv_ep->trb_pool_dma; + struct cdns3_trb *trb; + int trb_per_sector; + int ret = 0; + int i; + + trb_per_sector = GET_TRBS_PER_SEGMENT(priv_ep->type); + + trb = &priv_ep->trb_pool[priv_ep->dequeue]; + ret += sprintf(str + ret, "\n\t\tRing contents for %s:", priv_ep->name); + + ret += sprintf(str + ret, + "\n\t\tRing deq index: %d, trb: %p (virt), 0x%llx (dma)\n", + priv_ep->dequeue, trb, + (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb)); + + trb = &priv_ep->trb_pool[priv_ep->enqueue]; + ret += sprintf(str + ret, + "\t\tRing enq index: %d, trb: %p (virt), 0x%llx (dma)\n", + priv_ep->enqueue, trb, + (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb)); + + ret += sprintf(str + ret, + "\t\tfree trbs: %d, CCS=%d, PCS=%d\n", + priv_ep->free_trbs, priv_ep->ccs, priv_ep->pcs); + + if (trb_per_sector > TRBS_PER_SEGMENT) + trb_per_sector = TRBS_PER_SEGMENT; + + if (trb_per_sector > TRBS_PER_SEGMENT) { + sprintf(str + ret, "\t\tTo big transfer ring %d\n", + trb_per_sector); + return str; + } + + for (i = 0; i < trb_per_sector; ++i) { + trb = &ring[i]; + ret += sprintf(str + ret, + "\t\t@%pad %08x %08x %08x\n", &addr, + le32_to_cpu(trb->buffer), + le32_to_cpu(trb->length), + le32_to_cpu(trb->control)); + addr += sizeof(*trb); + } + + return str; +} + +void cdns3_dbg(struct cdns3_device *priv_dev, const char *fmt, ...); + +#ifdef CONFIG_DEBUG_FS +void cdns3_debugfs_init(struct cdns3 *cdns); +void cdns3_debugfs_exit(struct cdns3 *cdns); +#else +void cdns3_debugfs_init(struct cdns3 *cdns); +{ } +void cdns3_debugfs_exit(struct cdns3 *cdns); +{ } +#endif + +#endif /*__LINUX_CDNS3_DEBUG*/ diff --git a/drivers/usb/cdns3/debugfs.c b/drivers/usb/cdns3/debugfs.c new file mode 100644 index 000000000000..44ee78a10eb8 --- /dev/null +++ b/drivers/usb/cdns3/debugfs.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Controller DebugFS filer. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#include <linux/types.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> + +#include "core.h" +#include "gadget.h" +#include "drd.h" + +static const char *const cdns3_mode[] = { + [USB_DR_MODE_UNKNOWN] = "unknown", + [USB_DR_MODE_OTG] = "otg", + [USB_DR_MODE_HOST] = "host", + [USB_DR_MODE_PERIPHERAL] = "device", +}; + +static int cdns3_mode_show(struct seq_file *s, void *unused) +{ + struct cdns3 *cdns = s->private; + + seq_puts(s, cdns3_mode[cdns->current_dr_mode]); + + return 0; +} + +static int cdns3_mode_open(struct inode *inode, struct file *file) +{ + return single_open(file, cdns3_mode_show, inode->i_private); +} + +static ssize_t cdns3_mode_write(struct file *file, + const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct cdns3 *cdns = s->private; + char buf[32]; + int ret; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (cdns->debug_disable) { + dev_err(cdns->dev, + "Mode can't be changed when disable is set\n"); + return -EPERM; + } + + ret = match_string(cdns3_mode, ARRAY_SIZE(cdns3_mode), buf); + if (ret < 0 || ret == USB_DR_MODE_UNKNOWN) { + dev_err(cdns->dev, "Failed: incorrect mode setting\n"); + return -EINVAL; + } + + if (cdns->current_dr_mode != ret) { + cdns->desired_dr_mode = ret; + cdns3_role_stop(cdns); + ret = cdns3_drd_update_mode(cdns); + if (ret) + return ret; + + queue_work(system_freezable_wq, &cdns->role_switch_wq); + } + + return count; +} + +static const struct file_operations cdns3_mode_fops = { + .open = cdns3_mode_open, + .write = cdns3_mode_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int cdns3_disable_show(struct seq_file *s, void *unused) +{ + struct cdns3 *cdns = s->private; + + if (!cdns->debug_disable) + seq_puts(s, "0\n"); + else + seq_puts(s, "1\n"); + + return 0; +} + +static ssize_t cdns3_disable_write(struct file *file, + const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct cdns3 *cdns = s->private; + bool disable; + char buf[16]; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (kstrtobool(buf, &disable)) { + dev_err(cdns->dev, "wrong setting\n"); + return -EINVAL; + } + + if (disable != cdns->debug_disable) { + cdns->debug_disable = disable; + queue_work(system_freezable_wq, &cdns->role_switch_wq); + } + + return count; +} + +static int cdns3_disable_open(struct inode *inode, struct file *file) +{ + return single_open(file, cdns3_disable_show, inode->i_private); +} + +static const struct file_operations cdns3_disable_fops = { + .open = cdns3_disable_open, + .write = cdns3_disable_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void cdns3_debugfs_init(struct cdns3 *cdns) +{ + struct dentry *root; + + root = debugfs_create_dir(dev_name(cdns->dev), NULL); + cdns->root = root; + if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET) && + IS_ENABLED(CONFIG_USB_CDNS3_HOST)) + debugfs_create_file("mode", 0644, root, cdns, + &cdns3_mode_fops); + + debugfs_create_file("disable", 0644, root, cdns, + &cdns3_disable_fops); +} + +void cdns3_debugfs_exit(struct cdns3 *cdns) +{ + debugfs_remove_recursive(cdns->root); +} diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c new file mode 100644 index 000000000000..b06929fe1175 --- /dev/null +++ b/drivers/usb/cdns3/drd.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver. + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2019 Texas Instruments + * + * Author: Pawel Laszczak <pawell@cadence.com> + * Roger Quadros <rogerq@ti.com> + * + * + */ +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> + +#include "gadget.h" +#include "drd.h" +#include "core.h" + +/** + * cdns3_set_mode - change mode of OTG Core + * @cdns: pointer to context structure + * @mode: selected mode from cdns_role + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode) +{ + int ret = 0; + u32 reg; + + cdns->current_dr_mode = mode; + + switch (mode) { + case USB_DR_MODE_PERIPHERAL: + break; + case USB_DR_MODE_HOST: + break; + case USB_DR_MODE_OTG: + dev_dbg(cdns->dev, "Set controller to OTG mode\n"); + if (cdns->version == CDNS3_CONTROLLER_V1) { + reg = readl(&cdns->otg_v1_regs->override); + reg |= OVERRIDE_IDPULLUP; + writel(reg, &cdns->otg_v1_regs->override); + } else { + reg = readl(&cdns->otg_v0_regs->ctrl1); + reg |= OVERRIDE_IDPULLUP_V0; + writel(reg, &cdns->otg_v0_regs->ctrl1); + } + + /* + * Hardware specification says: "ID_VALUE must be valid within + * 50ms after idpullup is set to '1" so driver must wait + * 50ms before reading this pin. + */ + usleep_range(50000, 60000); + break; + default: + cdns->current_dr_mode = USB_DR_MODE_UNKNOWN; + dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode); + return -EINVAL; + } + + return ret; +} + +int cdns3_get_id(struct cdns3 *cdns) +{ + int id; + + id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE; + dev_dbg(cdns->dev, "OTG ID: %d", id); + + return id; +} + +int cdns3_get_vbus(struct cdns3 *cdns) +{ + int vbus; + + vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID); + dev_dbg(cdns->dev, "OTG VBUS: %d", vbus); + return vbus; +} + +int cdns3_is_host(struct cdns3 *cdns) +{ + if (cdns->current_dr_mode == USB_DR_MODE_HOST) + return 1; + else if (!cdns3_get_id(cdns)) + return 1; + + return 0; +} + +int cdns3_is_device(struct cdns3 *cdns) +{ + if (cdns->current_dr_mode == USB_DR_MODE_PERIPHERAL) + return 1; + else if (cdns->current_dr_mode == USB_DR_MODE_OTG) + if (cdns3_get_id(cdns)) + return 1; + + return 0; +} + +/** + * cdns3_otg_disable_irq - Disable all OTG interrupts + * @cdns: Pointer to controller context structure + */ +static void cdns3_otg_disable_irq(struct cdns3 *cdns) +{ + writel(0, &cdns->otg_regs->ien); +} + +/** + * cdns3_otg_enable_irq - enable id and sess_valid interrupts + * @cdns: Pointer to controller context structure + */ +static void cdns3_otg_enable_irq(struct cdns3 *cdns) +{ + writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT | + OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_regs->ien); +} + +/** + * cdns3_drd_switch_host - start/stop host + * @cdns: Pointer to controller context structure + * @on: 1 for start, 0 for stop + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_switch_host(struct cdns3 *cdns, int on) +{ + int ret; + u32 reg = OTGCMD_OTG_DIS; + + /* switch OTG core */ + if (on) { + writel(OTGCMD_HOST_BUS_REQ | reg, &cdns->otg_regs->cmd); + + dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n"); + ret = cdns3_handshake(&cdns->otg_regs->sts, OTGSTS_XHCI_READY, + OTGSTS_XHCI_READY, 100000); + + if (ret) { + dev_err(cdns->dev, "timeout waiting for xhci_ready\n"); + return ret; + } + } else { + writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP | + OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF, + &cdns->otg_regs->cmd); + /* Waiting till H_IDLE state.*/ + cdns3_handshake(&cdns->otg_regs->state, + OTGSTATE_HOST_STATE_MASK, + 0, 2000000); + } + + return 0; +} + +/** + * cdns3_drd_switch_gadget - start/stop gadget + * @cdns: Pointer to controller context structure + * @on: 1 for start, 0 for stop + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on) +{ + int ret; + u32 reg = OTGCMD_OTG_DIS; + + /* switch OTG core */ + if (on) { + writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd); + + dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n"); + + ret = cdns3_handshake(&cdns->otg_regs->sts, OTGSTS_DEV_READY, + OTGSTS_DEV_READY, 100000); + + if (ret) { + dev_err(cdns->dev, "timeout waiting for dev_ready\n"); + return ret; + } + } else { + /* + * driver should wait at least 10us after disabling Device + * before turning-off Device (DEV_BUS_DROP) + */ + usleep_range(20, 30); + writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP | + OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF, + &cdns->otg_regs->cmd); + /* Waiting till DEV_IDLE state.*/ + cdns3_handshake(&cdns->otg_regs->state, OTGSTATE_DEV_STATE_MASK, + 0, 2000000); + } + + return 0; +} + +/** + * cdns3_init_otg_mode - initialize drd controller + * @cdns: Pointer to controller context structure + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_init_otg_mode(struct cdns3 *cdns) +{ + int ret = 0; + + cdns3_otg_disable_irq(cdns); + /* clear all interrupts */ + writel(~0, &cdns->otg_regs->ivect); + + ret = cdns3_set_mode(cdns, USB_DR_MODE_OTG); + if (ret) + return ret; + + cdns3_otg_enable_irq(cdns); + return ret; +} + +/** + * cdns3_drd_update_mode - initialize mode of operation + * @cdns: Pointer to controller context structure + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_update_mode(struct cdns3 *cdns) +{ + int ret = 0; + + if (cdns->desired_dr_mode == cdns->current_dr_mode) + return ret; + + switch (cdns->desired_dr_mode) { + case USB_DR_MODE_PERIPHERAL: + ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL); + break; + case USB_DR_MODE_HOST: + ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST); + break; + case USB_DR_MODE_OTG: + ret = cdns3_init_otg_mode(cdns); + break; + default: + dev_err(cdns->dev, "Unsupported mode of operation %d\n", + cdns->dr_mode); + return -EINVAL; + } + + return ret; +} + +/** + * cdns3_drd_irq - interrupt handler for OTG events + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_drd_irq(int irq, void *data) +{ + irqreturn_t ret = IRQ_NONE; + struct cdns3 *cdns = data; + u32 reg; + + if (cdns->dr_mode != USB_DR_MODE_OTG) + return ret; + + reg = readl(&cdns->otg_regs->ivect); + + if (!reg) + return ret; + + if (reg & OTGIEN_ID_CHANGE_INT) { + dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n", + cdns3_get_id(cdns)); + + ret = IRQ_HANDLED; + } + + if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) { + dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n", + cdns3_get_vbus(cdns)); + + ret = IRQ_HANDLED; + } + + if (ret == IRQ_HANDLED) + queue_work(system_freezable_wq, &cdns->role_switch_wq); + + writel(~0, &cdns->otg_regs->ivect); + return ret; +} + +int cdns3_drd_init(struct cdns3 *cdns) +{ + void __iomem *regs; + int ret = 0; + u32 state; + + regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* Detection of DRD version. Controller has been released + * in two versions. Both are similar, but they have same changes + * in register maps. + * The first register in old version is command register and it's read + * only, so driver should read 0 from it. On the other hand, in v1 + * the first register contains device ID number which is not set to 0. + * Driver uses this fact to detect the proper version of + * controller. + */ + cdns->otg_v0_regs = regs; + if (!readl(&cdns->otg_v0_regs->cmd)) { + cdns->version = CDNS3_CONTROLLER_V0; + cdns->otg_v1_regs = NULL; + cdns->otg_regs = regs; + writel(1, &cdns->otg_v0_regs->simulate); + dev_info(cdns->dev, "DRD version v0 (%08x)\n", + readl(&cdns->otg_v0_regs->version)); + } else { + cdns->otg_v0_regs = NULL; + cdns->otg_v1_regs = regs; + cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd; + cdns->version = CDNS3_CONTROLLER_V1; + writel(1, &cdns->otg_v1_regs->simulate); + dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n", + readl(&cdns->otg_v1_regs->did), + readl(&cdns->otg_v1_regs->rid)); + } + + state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts)); + + /* Update dr_mode according to STRAP configuration. */ + cdns->dr_mode = USB_DR_MODE_OTG; + if (state == OTGSTS_STRAP_HOST) { + dev_dbg(cdns->dev, "Controller strapped to HOST\n"); + cdns->dr_mode = USB_DR_MODE_HOST; + } else if (state == OTGSTS_STRAP_GADGET) { + dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n"); + cdns->dr_mode = USB_DR_MODE_PERIPHERAL; + } + + cdns->desired_dr_mode = cdns->dr_mode; + cdns->current_dr_mode = USB_DR_MODE_UNKNOWN; + + ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq, + cdns3_drd_irq, + NULL, IRQF_SHARED, + dev_name(cdns->dev), cdns); + + if (ret) { + dev_err(cdns->dev, "couldn't get otg_irq\n"); + return ret; + } + + state = readl(&cdns->otg_regs->sts); + if (OTGSTS_OTG_NRDY(state) != 0) { + dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n"); + return -ENODEV; + } + + return ret; +} + +int cdns3_drd_exit(struct cdns3 *cdns) +{ + return 0; +} diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h new file mode 100644 index 000000000000..bf6c7bc41b58 --- /dev/null +++ b/drivers/usb/cdns3/drd.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USB3 DRD header file. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ +#ifndef __LINUX_CDNS3_DRD +#define __LINUX_CDNS3_DRD + +#include <linux/usb/otg.h> +#include <linux/phy/phy.h> +#include "core.h" + +/* DRD register interface for version v1. */ +struct cdns3_otg_regs { + __le32 did; + __le32 rid; + __le32 capabilities; + __le32 reserved1; + __le32 cmd; + __le32 sts; + __le32 state; + __le32 reserved2; + __le32 ien; + __le32 ivect; + __le32 refclk; + __le32 tmr; + __le32 reserved3[4]; + __le32 simulate; + __le32 override; + __le32 susp_ctrl; + __le32 reserved4; + __le32 anasts; + __le32 adp_ramp_time; + __le32 ctrl1; + __le32 ctrl2; +}; + +/* DRD register interface for version v0. */ +struct cdns3_otg_legacy_regs { + __le32 cmd; + __le32 sts; + __le32 state; + __le32 refclk; + __le32 ien; + __le32 ivect; + __le32 reserved1[3]; + __le32 tmr; + __le32 reserved2[2]; + __le32 version; + __le32 capabilities; + __le32 reserved3[2]; + __le32 simulate; + __le32 reserved4[5]; + __le32 ctrl1; +}; + +/* + * Common registers interface for both version of DRD. + */ +struct cdns3_otg_common_regs { + __le32 cmd; + __le32 sts; + __le32 state; + __le32 different1; + __le32 ien; + __le32 ivect; +}; + +/* CDNS_RID - bitmasks */ +#define CDNS_RID(p) ((p) & GENMASK(15, 0)) + +/* CDNS_VID - bitmasks */ +#define CDNS_DID(p) ((p) & GENMASK(31, 0)) + +/* OTGCMD - bitmasks */ +/* "Request the bus for Device mode. */ +#define OTGCMD_DEV_BUS_REQ BIT(0) +/* Request the bus for Host mode */ +#define OTGCMD_HOST_BUS_REQ BIT(1) +/* Enable OTG mode. */ +#define OTGCMD_OTG_EN BIT(2) +/* Disable OTG mode */ +#define OTGCMD_OTG_DIS BIT(3) +/*"Configure OTG as A-Device. */ +#define OTGCMD_A_DEV_EN BIT(4) +/*"Configure OTG as A-Device. */ +#define OTGCMD_A_DEV_DIS BIT(5) +/* Drop the bus for Device mod e. */ +#define OTGCMD_DEV_BUS_DROP BIT(8) +/* Drop the bus for Host mode*/ +#define OTGCMD_HOST_BUS_DROP BIT(9) +/* Power Down USBSS-DEV. */ +#define OTGCMD_DEV_POWER_OFF BIT(11) +/* Power Down CDNSXHCI. */ +#define OTGCMD_HOST_POWER_OFF BIT(12) + +/* OTGIEN - bitmasks */ +/* ID change interrupt enable */ +#define OTGIEN_ID_CHANGE_INT BIT(0) +/* Vbusvalid fall detected interrupt enable.*/ +#define OTGIEN_VBUSVALID_RISE_INT BIT(4) +/* Vbusvalid fall detected interrupt enable */ +#define OTGIEN_VBUSVALID_FALL_INT BIT(5) + +/* OTGSTS - bitmasks */ +/* + * Current value of the ID pin. It is only valid when idpullup in + * OTGCTRL1_TYPE register is set to '1'. + */ +#define OTGSTS_ID_VALUE BIT(0) +/* Current value of the vbus_valid */ +#define OTGSTS_VBUS_VALID BIT(1) +/* Current value of the b_sess_vld */ +#define OTGSTS_SESSION_VALID BIT(2) +/*Device mode is active*/ +#define OTGSTS_DEV_ACTIVE BIT(3) +/* Host mode is active. */ +#define OTGSTS_HOST_ACTIVE BIT(4) +/* OTG Controller not ready. */ +#define OTGSTS_OTG_NRDY_MASK BIT(11) +#define OTGSTS_OTG_NRDY(p) ((p) & OTGSTS_OTG_NRDY_MASK) +/* + * Value of the strap pins. + * 000 - no default configuration + * 010 - Controller initiall configured as Host + * 100 - Controller initially configured as Device + */ +#define OTGSTS_STRAP(p) (((p) & GENMASK(14, 12)) >> 12) +#define OTGSTS_STRAP_NO_DEFAULT_CFG 0x00 +#define OTGSTS_STRAP_HOST_OTG 0x01 +#define OTGSTS_STRAP_HOST 0x02 +#define OTGSTS_STRAP_GADGET 0x04 +/* Host mode is turned on. */ +#define OTGSTS_XHCI_READY BIT(26) +/* "Device mode is turned on .*/ +#define OTGSTS_DEV_READY BIT(27) + +/* OTGSTATE- bitmasks */ +#define OTGSTATE_DEV_STATE_MASK GENMASK(2, 0) +#define OTGSTATE_HOST_STATE_MASK GENMASK(5, 3) +#define OTGSTATE_HOST_STATE_IDLE 0x0 +#define OTGSTATE_HOST_STATE_VBUS_FALL 0x7 +#define OTGSTATE_HOST_STATE(p) (((p) & OTGSTATE_HOST_STATE_MASK) >> 3) + +/* OTGREFCLK - bitmasks */ +#define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31) + +/* OVERRIDE - bitmasks */ +#define OVERRIDE_IDPULLUP BIT(0) +/* Only for CDNS3_CONTROLLER_V0 version */ +#define OVERRIDE_IDPULLUP_V0 BIT(24) + +int cdns3_is_host(struct cdns3 *cdns); +int cdns3_is_device(struct cdns3 *cdns); +int cdns3_get_id(struct cdns3 *cdns); +int cdns3_get_vbus(struct cdns3 *cdns); +int cdns3_drd_init(struct cdns3 *cdns); +int cdns3_drd_exit(struct cdns3 *cdns); +int cdns3_drd_update_mode(struct cdns3 *cdns); +int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on); +int cdns3_drd_switch_host(struct cdns3 *cdns, int on); + +#endif /* __LINUX_CDNS3_DRD */ diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c new file mode 100644 index 000000000000..6fa711ead6d0 --- /dev/null +++ b/drivers/usb/cdns3/ep0.c @@ -0,0 +1,920 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - gadget side. + * + * Copyright (C) 2018 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Pawel Jez <pjez@cadence.com>, + * Pawel Laszczak <pawell@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ + +#include <linux/usb/composite.h> + +#include "gadget.h" +#include "trace.h" + +static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +/** + * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware + * @priv_dev: extended gadget object + * @dma_addr: physical address where data is/will be stored + * @length: data length + * @erdy: set it to 1 when ERDY packet should be sent - + * exit from flow control state + */ +static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, + dma_addr_t dma_addr, + unsigned int length, int erdy, int zlp) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + + priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); + priv_ep->trb_pool[0].length = TRB_LEN(length); + + if (zlp) { + priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); + priv_ep->trb_pool[1].length = TRB_LEN(0); + priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL); + } else { + priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[1].control = 0; + } + + trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool); + + cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir); + + writel(EP_STS_TRBERR, ®s->ep_sts); + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), ®s->ep_traddr); + trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out", + readl(®s->ep_traddr)); + + /* TRB should be prepared before starting transfer. */ + writel(EP_CMD_DRDY, ®s->ep_cmd); + + /* Resume controller before arming transfer. */ + __cdns3_gadget_wakeup(priv_dev); + + if (erdy) + writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd); +} + +/** + * cdns3_ep0_delegate_req - Returns status of handling setup packet + * Setup is handled by gadget driver + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns zero on success or negative value on failure + */ +static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + int ret; + + spin_unlock(&priv_dev->lock); + priv_dev->setup_pending = 1; + ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req); + priv_dev->setup_pending = 0; + spin_lock(&priv_dev->lock); + return ret; +} + +static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev) +{ + priv_dev->ep0_data_dir = 0; + priv_dev->ep0_stage = CDNS3_SETUP_STAGE; + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, + sizeof(struct usb_ctrlrequest), 0, 0); +} + +static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev, + u8 send_stall, u8 send_erdy) +{ + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + if (request) + list_del_init(&request->list); + + if (send_stall) { + cdns3_dbg(priv_ep->cdns3_dev, "STALL for ep0\n"); + /* set_stall on ep0 */ + cdns3_select_ep(priv_dev, 0x00); + writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd); + } else { + cdns3_prepare_setup_packet(priv_dev); + } + + priv_dev->ep0_stage = CDNS3_SETUP_STAGE; + writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL, + &priv_dev->regs->ep_cmd); + + cdns3_allow_enable_l1(priv_dev, 1); +} + +/** + * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage, + * error code on error + */ +static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + enum usb_device_state device_state = priv_dev->gadget.state; + struct cdns3_endpoint *priv_ep; + u32 config = le16_to_cpu(ctrl_req->wValue); + int result = 0; + int i; + + switch (device_state) { + case USB_STATE_ADDRESS: + /* Configure non-control EPs */ + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { + priv_ep = priv_dev->eps[i]; + if (!priv_ep) + continue; + + if (priv_ep->flags & EP_CLAIMED) + cdns3_ep_config(priv_ep); + } + + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + + if (result) + return result; + + if (config) { + cdns3_set_hw_configuration(priv_dev); + } else { + cdns3_hw_reset_eps_config(priv_dev); + usb_gadget_set_state(&priv_dev->gadget, + USB_STATE_ADDRESS); + } + break; + case USB_STATE_CONFIGURED: + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + + if (!config && !result) { + cdns3_hw_reset_eps_config(priv_dev); + usb_gadget_set_state(&priv_dev->gadget, + USB_STATE_ADDRESS); + } + break; + default: + result = -EINVAL; + } + + return result; +} + +/** + * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + enum usb_device_state device_state = priv_dev->gadget.state; + u32 reg; + u32 addr; + + addr = le16_to_cpu(ctrl_req->wValue); + + if (addr > USB_DEVICE_MAX_ADDRESS) { + dev_err(priv_dev->dev, + "Device address (%d) cannot be greater than %d\n", + addr, USB_DEVICE_MAX_ADDRESS); + return -EINVAL; + } + + if (device_state == USB_STATE_CONFIGURED) { + dev_err(priv_dev->dev, + "can't set_address from configured state\n"); + return -EINVAL; + } + + reg = readl(&priv_dev->regs->usb_cmd); + + writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR, + &priv_dev->regs->usb_cmd); + + usb_gadget_set_state(&priv_dev->gadget, + (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT)); + + return 0; +} + +/** + * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl) +{ + __le16 *response_pkt; + u16 usb_status = 0; + u32 recip; + u32 reg; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + /* self powered */ + if (priv_dev->is_selfpowered) + usb_status = BIT(USB_DEVICE_SELF_POWERED); + + if (priv_dev->wake_up_flag) + usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP); + + if (priv_dev->gadget.speed != USB_SPEED_SUPER) + break; + + reg = readl(&priv_dev->regs->usb_sts); + + if (priv_dev->u1_allowed) + usb_status |= BIT(USB_DEV_STAT_U1_ENABLED); + + if (priv_dev->u2_allowed) + usb_status |= BIT(USB_DEV_STAT_U2_ENABLED); + + break; + case USB_RECIP_INTERFACE: + return cdns3_ep0_delegate_req(priv_dev, ctrl); + case USB_RECIP_ENDPOINT: + /* check if endpoint is stalled */ + cdns3_select_ep(priv_dev, ctrl->wIndex); + if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts))) + usb_status = BIT(USB_ENDPOINT_HALT); + break; + default: + return -EINVAL; + } + + response_pkt = (__le16 *)priv_dev->setup_buf; + *response_pkt = cpu_to_le16(usb_status); + + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, + sizeof(*response_pkt), 1, 0); + return 0; +} + +static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + enum usb_device_state state; + enum usb_device_speed speed; + int ret = 0; + u32 wValue; + u32 wIndex; + u16 tmode; + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + state = priv_dev->gadget.state; + speed = priv_dev->gadget.speed; + + switch (ctrl->wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + priv_dev->wake_up_flag = !!set; + break; + case USB_DEVICE_U1_ENABLE: + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) + return -EINVAL; + + priv_dev->u1_allowed = !!set; + break; + case USB_DEVICE_U2_ENABLE: + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) + return -EINVAL; + + priv_dev->u2_allowed = !!set; + break; + case USB_DEVICE_LTM_ENABLE: + ret = -EINVAL; + break; + case USB_DEVICE_TEST_MODE: + if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH) + return -EINVAL; + + tmode = le16_to_cpu(ctrl->wIndex); + + if (!set || (tmode & 0xff) != 0) + return -EINVAL; + + switch (tmode >> 8) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + cdns3_ep0_complete_setup(priv_dev, 0, 1); + /** + * Little delay to give the controller some time + * for sending status stage. + * This time should be less then 3ms. + */ + usleep_range(1000, 2000); + cdns3_set_register_bit(&priv_dev->regs->usb_cmd, + USB_CMD_STMODE | + USB_STS_TMODE_SEL(tmode - 1)); + break; + default: + ret = -EINVAL; + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + u32 wValue; + int ret = 0; + + wValue = le16_to_cpu(ctrl->wValue); + + switch (wValue) { + case USB_INTRF_FUNC_SUSPEND: + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + struct cdns3_endpoint *priv_ep; + int ret = 0; + u8 index; + + if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT) + return -EINVAL; + + if (!(ctrl->wIndex & ~USB_DIR_IN)) + return 0; + + index = cdns3_ep_addr_to_index(ctrl->wIndex); + priv_ep = priv_dev->eps[index]; + + cdns3_select_ep(priv_dev, ctrl->wIndex); + + if (set) { + cdns3_dbg(priv_ep->cdns3_dev, "Stall endpoint %s\n", + priv_ep->name); + writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd); + priv_ep->flags |= EP_STALL; + } else { + struct usb_request *request; + + if (priv_dev->eps[index]->flags & EP_WEDGE) { + cdns3_select_ep(priv_dev, 0x00); + return 0; + } + + cdns3_dbg(priv_ep->cdns3_dev, "Clear Stalled endpoint %s\n", + priv_ep->name); + + writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + /* wait for EPRST cleared */ + ret = cdns3_handshake(&priv_dev->regs->ep_cmd, + EP_CMD_EPRST, 0, 100); + if (ret) + return -EINVAL; + + priv_ep->flags &= ~EP_STALL; + + request = cdns3_next_request(&priv_ep->pending_req_list); + if (request) { + cdns3_dbg(priv_ep->cdns3_dev, "Resume transfer for %s\n", + priv_ep->name); + + cdns3_rearm_transfer(priv_ep, 1); + } + } + + return ret; +} + +/** + * cdns3_req_ep0_handle_feature - + * Handling of GET/SET_FEATURE standard USB request + * + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * @set: must be set to 1 for SET_FEATURE request + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + int ret = 0; + u32 recip; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set); + break; + case USB_RECIP_INTERFACE: + ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set); + break; + case USB_RECIP_ENDPOINT: + ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set); + break; + default: + return -EINVAL; + } + + return ret; +} + +/** + * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + if (priv_dev->gadget.state < USB_STATE_ADDRESS) + return -EINVAL; + + if (ctrl_req->wLength != 6) { + dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", + ctrl_req->wLength); + return -EINVAL; + } + + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0); + return 0; +} + +/** + * cdns3_req_ep0_set_isoch_delay - + * Handling of GET_ISOCH_DELAY standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + if (ctrl_req->wIndex || ctrl_req->wLength) + return -EINVAL; + + priv_dev->isoch_delay = ctrl_req->wValue; + + return 0; +} + +/** + * cdns3_ep0_standard_request - Handling standard USB requests + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + int ret; + + switch (ctrl_req->bRequest) { + case USB_REQ_SET_ADDRESS: + ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req); + break; + case USB_REQ_SET_CONFIGURATION: + ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req); + break; + case USB_REQ_GET_STATUS: + ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req); + break; + case USB_REQ_CLEAR_FEATURE: + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0); + break; + case USB_REQ_SET_FEATURE: + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1); + break; + case USB_REQ_SET_SEL: + ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req); + break; + case USB_REQ_SET_ISOCH_DELAY: + ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req); + break; + default: + ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + break; + } + + return ret; +} + +static void __pending_setup_status_handler(struct cdns3_device *priv_dev) +{ + struct usb_request *request = priv_dev->pending_status_request; + + if (priv_dev->status_completion_no_call && request && + request->complete) { + request->complete(&priv_dev->eps[0]->endpoint, request); + priv_dev->status_completion_no_call = 0; + } +} + +void cdns3_pending_setup_status_handler(struct work_struct *work) +{ + struct cdns3_device *priv_dev = container_of(work, struct cdns3_device, + pending_status_wq); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + __pending_setup_status_handler(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); +} + +/** + * cdns3_ep0_setup_phase - Handling setup USB requests + * @priv_dev: extended gadget object + */ +static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev) +{ + struct usb_ctrlrequest *ctrl = priv_dev->setup_buf; + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + int result; + + priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN; + + trace_cdns3_ctrl_req(ctrl); + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_ep->dir = priv_dev->ep0_data_dir; + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ECONNRESET); + } + + if (le16_to_cpu(ctrl->wLength)) + priv_dev->ep0_stage = CDNS3_DATA_STAGE; + else + priv_dev->ep0_stage = CDNS3_STATUS_STAGE; + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + result = cdns3_ep0_standard_request(priv_dev, ctrl); + else + result = cdns3_ep0_delegate_req(priv_dev, ctrl); + + if (result == USB_GADGET_DELAYED_STATUS) + return; + + if (result < 0) + cdns3_ep0_complete_setup(priv_dev, 1, 1); + else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) + cdns3_ep0_complete_setup(priv_dev, 0, 1); +} + +static void cdns3_transfer_completed(struct cdns3_device *priv_dev) +{ + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool); + request = cdns3_next_request(&priv_ep->pending_req_list); + + request->actual = + TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length)); + + priv_ep->dir = priv_dev->ep0_data_dir; + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0); + } + + cdns3_ep0_complete_setup(priv_dev, 0, 0); +} + +/** + * cdns3_check_new_setup - Check if controller receive new SETUP packet. + * @priv_dev: extended gadget object + * + * The SETUP packet can be kept in on-chip memory or in system memory. + */ +static bool cdns3_check_new_setup(struct cdns3_device *priv_dev) +{ + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT); + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + + return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT)); +} + +/** + * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0 + * @priv_dev: extended gadget object + * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction + */ +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir) +{ + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, dir); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + writel(ep_sts_reg, &priv_dev->regs->ep_sts); + + trace_cdns3_ep0_irq(priv_dev, ep_sts_reg); + + __pending_setup_status_handler(priv_dev); + + if (ep_sts_reg & EP_STS_SETUP) + priv_dev->wait_for_setup = 1; + + if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) { + priv_dev->wait_for_setup = 0; + cdns3_allow_enable_l1(priv_dev, 0); + cdns3_ep0_setup_phase(priv_dev); + } else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + priv_dev->ep0_data_dir = dir; + cdns3_transfer_completed(priv_dev); + } + + if (ep_sts_reg & EP_STS_DESCMIS) { + if (dir == 0 && !priv_dev->setup_pending) + cdns3_prepare_setup_packet(priv_dev); + } +} + +/** + * cdns3_gadget_ep0_enable + * Function shouldn't be called by gadget driver, + * endpoint 0 is allways active + */ +static int cdns3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +/** + * cdns3_gadget_ep0_disable + * Function shouldn't be called by gadget driver, + * endpoint 0 is allways active + */ +static int cdns3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/** + * cdns3_gadget_ep0_set_halt + * @ep: pointer to endpoint zero object + * @value: 1 for set stall, 0 for clear stall + * + * Returns 0 + */ +static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value) +{ + /* TODO */ + return 0; +} + +/** + * cdns3_gadget_ep0_queue Transfer data on endpoint zero + * @ep: pointer to endpoint zero object + * @request: pointer to request object + * @gfp_flags: gfp flags + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep0_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + unsigned long flags; + int erdy_sent = 0; + int ret = 0; + u8 zlp = 0; + + cdns3_dbg(priv_ep->cdns3_dev, "Queue to Ep0%s L: %d\n", + priv_dev->ep0_data_dir ? "IN" : "OUT", + request->length); + + /* cancel the request if controller receive new SETUP packet. */ + if (cdns3_check_new_setup(priv_dev)) + return -ECONNRESET; + + /* send STATUS stage. Should be called only for SET_CONFIGURATION */ + if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { + spin_lock_irqsave(&priv_dev->lock, flags); + cdns3_select_ep(priv_dev, 0x00); + + erdy_sent = !priv_dev->hw_configured_flag; + cdns3_set_hw_configuration(priv_dev); + + if (!erdy_sent) + cdns3_ep0_complete_setup(priv_dev, 0, 1); + + cdns3_allow_enable_l1(priv_dev, 1); + + request->actual = 0; + priv_dev->status_completion_no_call = true; + priv_dev->pending_status_request = request; + spin_unlock_irqrestore(&priv_dev->lock, flags); + + /* + * Since there is no completion interrupt for status stage, + * it needs to call ->completion in software after + * ep0_queue is back. + */ + queue_work(system_freezable_wq, &priv_dev->pending_status_wq); + return 0; + } + + spin_lock_irqsave(&priv_dev->lock, flags); + if (!list_empty(&priv_ep->pending_req_list)) { + dev_err(priv_dev->dev, + "can't handle multiple requests for ep0\n"); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return -EBUSY; + } + + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request, + priv_dev->ep0_data_dir); + if (ret) { + spin_unlock_irqrestore(&priv_dev->lock, flags); + dev_err(priv_dev->dev, "failed to map request\n"); + return -EINVAL; + } + + request->status = -EINPROGRESS; + list_add_tail(&request->list, &priv_ep->pending_req_list); + + if (request->zero && request->length && + (request->length % ep->maxpacket == 0)) + zlp = 1; + + cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp); + + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint + * @ep: endpoint object + * + * Returns 0 + */ +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name); + cdns3_gadget_ep_set_halt(ep, 1); + priv_ep->flags |= EP_WEDGE; + + return 0; +} + +const struct usb_ep_ops cdns3_gadget_ep0_ops = { + .enable = cdns3_gadget_ep0_enable, + .disable = cdns3_gadget_ep0_disable, + .alloc_request = cdns3_gadget_ep_alloc_request, + .free_request = cdns3_gadget_ep_free_request, + .queue = cdns3_gadget_ep0_queue, + .dequeue = cdns3_gadget_ep_dequeue, + .set_halt = cdns3_gadget_ep0_set_halt, + .set_wedge = cdns3_gadget_ep_set_wedge, +}; + +/** + * cdns3_ep0_config - Configures default endpoint + * @priv_dev: extended gadget object + * + * Functions sets parameters: maximal packet size and enables interrupts + */ +void cdns3_ep0_config(struct cdns3_device *priv_dev) +{ + struct cdns3_usb_regs __iomem *regs; + struct cdns3_endpoint *priv_ep; + u32 max_packet_size = 64; + + regs = priv_dev->regs; + + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + max_packet_size = 512; + + priv_ep = priv_dev->eps[0]; + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + list_del_init(&request->list); + } + + priv_dev->u1_allowed = 0; + priv_dev->u2_allowed = 0; + + priv_dev->gadget.ep0->maxpacket = max_packet_size; + cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size); + + /* init ep out */ + cdns3_select_ep(priv_dev, USB_DIR_OUT); + + if (priv_dev->dev_ver >= DEV_VER_V3) { + cdns3_set_register_bit(&priv_dev->regs->dtrans, + BIT(0) | BIT(16)); + cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb, + BIT(0) | BIT(16)); + } + + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), + ®s->ep_cfg); + + writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN, + ®s->ep_sts_en); + + /* init ep in */ + cdns3_select_ep(priv_dev, USB_DIR_IN); + + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), + ®s->ep_cfg); + + writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en); + + cdns3_set_register_bit(®s->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS); +} + +/** + * cdns3_init_ep0 Initializes software endpoint 0 of gadget + * @priv_dev: extended gadget object + * @ep_priv: extended endpoint object + * + * Returns 0 on success else error code. + */ +int cdns3_init_ep0(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + sprintf(priv_ep->name, "ep0"); + + /* fill linux fields */ + priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops; + priv_ep->endpoint.maxburst = 1; + usb_ep_set_maxpacket_limit(&priv_ep->endpoint, + CDNS3_EP0_MAX_PACKET_LIMIT); + priv_ep->endpoint.address = 0; + priv_ep->endpoint.caps.type_control = 1; + priv_ep->endpoint.caps.dir_in = 1; + priv_ep->endpoint.caps.dir_out = 1; + priv_ep->endpoint.name = priv_ep->name; + priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc; + priv_dev->gadget.ep0 = &priv_ep->endpoint; + priv_ep->type = USB_ENDPOINT_XFER_CONTROL; + + return cdns3_allocate_trb_pool(priv_ep); +} diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h new file mode 100644 index 000000000000..577469eee961 --- /dev/null +++ b/drivers/usb/cdns3/gadget-export.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver - Gadget Export APIs. + * + * Copyright (C) 2017 NXP + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_GADGET_EXPORT +#define __LINUX_CDNS3_GADGET_EXPORT + +#ifdef CONFIG_USB_CDNS3_GADGET + +int cdns3_gadget_init(struct cdns3 *cdns); +void cdns3_gadget_exit(struct cdns3 *cdns); +#else + +static inline int cdns3_gadget_init(struct cdns3 *cdns) +{ + return -ENXIO; +} + +static inline void cdns3_gadget_exit(struct cdns3 *cdns) { } + +#endif + +#endif /* __LINUX_CDNS3_GADGET_EXPORT */ diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c new file mode 100644 index 000000000000..63cde269db98 --- /dev/null +++ b/drivers/usb/cdns3/gadget.c @@ -0,0 +1,2645 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - gadget side. + * + * Copyright (C) 2018-2019 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Pawel Jez <pjez@cadence.com>, + * Pawel Laszczak <pawell@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ + +/* + * Work around 1: + * At some situations, the controller may get stale data address in TRB + * at below sequences: + * 1. Controller read TRB includes data address + * 2. Software updates TRBs includes data address and Cycle bit + * 3. Controller read TRB which includes Cycle bit + * 4. DMA run with stale data address + * + * To fix this problem, driver needs to make the first TRB in TD as invalid. + * After preparing all TRBs driver needs to check the position of DMA and + * if the DMA point to the first just added TRB and doorbell is 1, + * then driver must defer making this TRB as valid. This TRB will be make + * as valid during adding next TRB only if DMA is stopped or at TRBERR + * interrupt. + * + * Issue has been fixed in DEV_VER_V3 version of controller. + * + * Work around 2: + * Controller for OUT endpoints has shared on-chip buffers for all incoming + * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA + * in correct order. If the first packet in the buffer will not be handled, + * then the following packets directed for other endpoints and functions + * will be blocked. + * Additionally the packets directed to one endpoint can block entire on-chip + * buffers. In this case transfer to other endpoints also will blocked. + * + * To resolve this issue after raising the descriptor missing interrupt + * driver prepares internal usb_request object and use it to arm DMA transfer. + * + * The problematic situation was observed in case when endpoint has been enabled + * but no usb_request were queued. Driver try detects such endpoints and will + * use this workaround only for these endpoint. + * + * Driver use limited number of buffer. This number can be set by macro + * CDNS3_WA2_NUM_BUFFERS. + * + * Such blocking situation was observed on ACM gadget. For this function + * host send OUT data packet but ACM function is not prepared for this packet. + * It's cause that buffer placed in on chip memory block transfer to other + * endpoints. + * + * Issue has been fixed in DEV_VER_V2 version of controller. + * + */ + +#include <linux/dma-mapping.h> +#include <linux/usb/gadget.h> +#include <linux/module.h> + +#include "core.h" +#include "gadget-export.h" +#include "gadget.h" +#include "trace.h" +#include "drd.h" + +static int __cdns3_gadget_ep_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags); + +/** + * cdns3_set_register_bit - set bit in given register. + * @ptr: address of device controller register to be read and changed + * @mask: bits requested to set + */ +void cdns3_set_register_bit(void __iomem *ptr, u32 mask) +{ + mask = readl(ptr) | mask; + writel(mask, ptr); +} + +/** + * cdns3_ep_addr_to_index - Macro converts endpoint address to + * index of endpoint object in cdns3_device.eps[] container + * @ep_addr: endpoint address for which endpoint object is required + * + */ +u8 cdns3_ep_addr_to_index(u8 ep_addr) +{ + return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0)); +} + +static int cdns3_get_dma_pos(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + int dma_index; + + dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma; + + return dma_index / TRB_SIZE; +} + +/** + * cdns3_next_request - returns next request from list + * @list: list containing requests + * + * Returns request or NULL if no requests in list + */ +struct usb_request *cdns3_next_request(struct list_head *list) +{ + return list_first_entry_or_null(list, struct usb_request, list); +} + +/** + * cdns3_next_align_buf - returns next buffer from list + * @list: list containing buffers + * + * Returns buffer or NULL if no buffers in list + */ +struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list) +{ + return list_first_entry_or_null(list, struct cdns3_aligned_buf, list); +} + +/** + * cdns3_next_priv_request - returns next request from list + * @list: list containing requests + * + * Returns request or NULL if no requests in list + */ +struct cdns3_request *cdns3_next_priv_request(struct list_head *list) +{ + return list_first_entry_or_null(list, struct cdns3_request, list); +} + +/** + * select_ep - selects endpoint + * @priv_dev: extended gadget object + * @ep: endpoint address + */ +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep) +{ + if (priv_dev->selected_ep == ep) + return; + + priv_dev->selected_ep = ep; + writel(ep, &priv_dev->regs->ep_sel); +} + +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb) +{ + u32 offset = (char *)trb - (char *)priv_ep->trb_pool; + + return priv_ep->trb_pool_dma + offset; +} + +int cdns3_ring_size(struct cdns3_endpoint *priv_ep) +{ + switch (priv_ep->type) { + case USB_ENDPOINT_XFER_ISOC: + return TRB_ISO_RING_SIZE; + case USB_ENDPOINT_XFER_CONTROL: + return TRB_CTRL_RING_SIZE; + default: + return TRB_RING_SIZE; + } +} + +/** + * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint + * @priv_ep: endpoint object + * + * Function will return 0 on success or -ENOMEM on allocation error + */ +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + int ring_size = cdns3_ring_size(priv_ep); + struct cdns3_trb *link_trb; + + if (!priv_ep->trb_pool) { + priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev, + ring_size, + &priv_ep->trb_pool_dma, + GFP_DMA32 | GFP_ATOMIC); + if (!priv_ep->trb_pool) + return -ENOMEM; + } else { + memset(priv_ep->trb_pool, 0, ring_size); + } + + if (!priv_ep->num) + return 0; + + priv_ep->num_trbs = ring_size / TRB_SIZE; + /* Initialize the last TRB as Link TRB */ + link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1)); + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); + link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; + + return 0; +} + +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_ep->trb_pool) { + dma_free_coherent(priv_dev->sysdev, + cdns3_ring_size(priv_ep), + priv_ep->trb_pool, priv_ep->trb_pool_dma); + priv_ep->trb_pool = NULL; + } +} + +/** + * cdns3_ep_stall_flush - Stalls and flushes selected endpoint + * @priv_ep: endpoint object + * + * Endpoint must be selected before call to this function + */ +static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + cdns3_dbg(priv_ep->cdns3_dev, "Stall & flush endpoint %s\n", + priv_ep->name); + + writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL, + &priv_dev->regs->ep_cmd); + + /* wait for DFLUSH cleared */ + cdns3_handshake(&priv_dev->regs->ep_cmd, EP_CMD_DFLUSH, 0, 1000); + priv_ep->flags |= EP_STALL; +} + +/** + * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller. + * @priv_dev: extended gadget object + */ +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) +{ + writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf); + + cdns3_allow_enable_l1(priv_dev, 0); + priv_dev->hw_configured_flag = 0; + priv_dev->onchip_used_size = 0; + priv_dev->out_mem_is_allocated = 0; + priv_dev->wait_for_setup = 0; +} + +/** + * cdns3_ep_inc_trb - increment a trb index. + * @index: Pointer to the TRB index to increment. + * @cs: Cycle state + * @trb_in_seg: number of TRBs in segment + * + * The index should never point to the link TRB. After incrementing, + * if it is point to the link TRB, wrap around to the beginning and revert + * cycle state bit The + * link TRB is always at the last TRB entry. + */ +static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg) +{ + (*index)++; + if (*index == (trb_in_seg - 1)) { + *index = 0; + *cs ^= 1; + } +} + +/** + * cdns3_ep_inc_enq - increment endpoint's enqueue pointer + * @priv_ep: The endpoint whose enqueue pointer we're incrementing + */ +static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep) +{ + priv_ep->free_trbs--; + cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs); +} + +/** + * cdns3_ep_inc_deq - increment endpoint's dequeue pointer + * @priv_ep: The endpoint whose dequeue pointer we're incrementing + */ +static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep) +{ + priv_ep->free_trbs++; + cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs); +} + +void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req) +{ + struct cdns3_endpoint *priv_ep = priv_req->priv_ep; + int current_trb = priv_req->start_trb; + + while (current_trb != priv_req->end_trb) { + cdns3_ep_inc_deq(priv_ep); + current_trb = priv_ep->dequeue; + } + + cdns3_ep_inc_deq(priv_ep); +} + +/** + * cdns3_allow_enable_l1 - enable/disable permits to transition to L1. + * @priv_dev: Extended gadget object + * @enable: Enable/disable permit to transition to L1. + * + * If bit USB_CONF_L1EN is set and device receive Extended Token packet, + * then controller answer with ACK handshake. + * If bit USB_CONF_L1DS is set and device receive Extended Token packet, + * then controller answer with NYET handshake. + */ +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable) +{ + if (enable) + writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf); + else + writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf); +} + +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev) +{ + u32 reg; + + reg = readl(&priv_dev->regs->usb_sts); + + if (DEV_SUPERSPEED(reg)) + return USB_SPEED_SUPER; + else if (DEV_HIGHSPEED(reg)) + return USB_SPEED_HIGH; + else if (DEV_FULLSPEED(reg)) + return USB_SPEED_FULL; + else if (DEV_LOWSPEED(reg)) + return USB_SPEED_LOW; + return USB_SPEED_UNKNOWN; +} + +/** + * cdns3_start_all_request - add to ring all request not started + * @priv_dev: Extended gadget object + * @priv_ep: The endpoint for whom request will be started. + * + * Returns return ENOMEM if transfer ring i not enough TRBs to start + * all requests. + */ +static int cdns3_start_all_request(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + struct usb_request *request; + int ret = 0; + + while (!list_empty(&priv_ep->deferred_req_list)) { + request = cdns3_next_request(&priv_ep->deferred_req_list); + priv_req = to_cdns3_request(request); + + ret = cdns3_ep_run_transfer(priv_ep, request); + if (ret) + return ret; + + list_del(&request->list); + list_add_tail(&request->list, + &priv_ep->pending_req_list); + } + + priv_ep->flags &= ~EP_RING_FULL; + return ret; +} + +/* + * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set + * driver try to detect whether endpoint need additional internal + * buffer for unblocking on-chip FIFO buffer. This flag will be cleared + * if before first DESCMISS interrupt the DMA will be armed. + */ +#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \ + if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \ + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \ + (reg) |= EP_STS_EN_DESCMISEN; \ + } } while (0) + +/** + * cdns3_wa2_descmiss_copy_data copy data from internal requests to + * request queued by class driver. + * @priv_ep: extended endpoint object + * @request: request object + */ +static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct usb_request *descmiss_req; + struct cdns3_request *descmiss_priv_req; + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + int chunk_end; + int length; + + descmiss_priv_req = + cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + descmiss_req = &descmiss_priv_req->request; + + /* driver can't touch pending request */ + if (descmiss_priv_req->flags & REQUEST_PENDING) + break; + + chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH; + length = request->actual + descmiss_req->actual; + + request->status = descmiss_req->status; + + if (length <= request->length) { + memcpy(&((u8 *)request->buf)[request->actual], + descmiss_req->buf, + descmiss_req->actual); + request->actual = length; + } else { + /* It should never occures */ + request->status = -ENOMEM; + } + + list_del_init(&descmiss_priv_req->list); + + kfree(descmiss_req->buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req); + --priv_ep->wa2_counter; + + if (!chunk_end) + break; + } +} + +struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN && + priv_req->flags & REQUEST_INTERNAL) { + struct usb_request *req; + + req = cdns3_next_request(&priv_ep->deferred_req_list); + + priv_ep->descmis_req = NULL; + + if (!req) + return NULL; + + cdns3_wa2_descmiss_copy_data(priv_ep, req); + if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) && + req->length != req->actual) { + /* wait for next part of transfer */ + return NULL; + } + + if (req->status == -EINPROGRESS) + req->status = 0; + + list_del_init(&req->list); + cdns3_start_all_request(priv_dev, priv_ep); + return req; + } + + return &priv_req->request; +} + +int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + int deferred = 0; + + /* + * If transfer was queued before DESCMISS appear than we + * can disable handling of DESCMISS interrupt. Driver assumes that it + * can disable special treatment for this endpoint. + */ + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { + u32 reg; + + cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir); + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; + reg = readl(&priv_dev->regs->ep_sts_en); + reg &= ~EP_STS_EN_DESCMISEN; + writel(reg, &priv_dev->regs->ep_sts_en); + } + + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list); + + /* + * DESCMISS transfer has been finished, so data will be + * directly copied from internal allocated usb_request + * objects. + */ + if (pending_empty && !descmiss_empty && + !(priv_req->flags & REQUEST_INTERNAL)) { + cdns3_wa2_descmiss_copy_data(priv_ep, + &priv_req->request); + list_add_tail(&priv_req->request.list, + &priv_ep->pending_req_list); + cdns3_gadget_giveback(priv_ep, priv_req, + priv_req->request.status); + + /* + * Intentionally driver returns positive value as + * correct value. It informs that transfer has + * been finished. + */ + return EINPROGRESS; + } + + /* + * Driver will wait for completion DESCMISS transfer, + * before starts new, not DESCMISS transfer. + */ + if (!pending_empty && !descmiss_empty) + deferred = 1; + + if (priv_req->flags & REQUEST_INTERNAL) + list_add_tail(&priv_req->list, + &priv_ep->wa2_descmiss_req_list); + } + + return deferred; +} + +static void cdsn3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + u8 chain; + + priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + chain = !!(priv_req->flags & REQUEST_INTERNAL_CH); + + kfree(priv_req->request.buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, + &priv_req->request); + list_del_init(&priv_req->list); + --priv_ep->wa2_counter; + + if (!chain) + break; + } +} + +/** + * cdns3_wa2_descmissing_packet - handles descriptor missing event. + * @priv_dev: extended gadget object + * + * This function is used only for WA2. For more information see Work around 2 + * description. + */ +static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + struct usb_request *request; + + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN; + } + + cdns3_dbg(priv_ep->cdns3_dev, "WA2: Description Missing detected\n"); + + if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) + cdsn3_wa2_remove_old_request(priv_ep); + + request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint, + GFP_ATOMIC); + if (!request) + goto err; + + priv_req = to_cdns3_request(request); + priv_req->flags |= REQUEST_INTERNAL; + + /* if this field is still assigned it indicate that transfer related + * with this request has not been finished yet. Driver in this + * case simply allocate next request and assign flag REQUEST_INTERNAL_CH + * flag to previous one. It will indicate that current request is + * part of the previous one. + */ + if (priv_ep->descmis_req) + priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH; + + priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE, + GFP_ATOMIC); + priv_ep->wa2_counter++; + + if (!priv_req->request.buf) { + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); + goto err; + } + + priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE; + priv_ep->descmis_req = priv_req; + + __cdns3_gadget_ep_queue(&priv_ep->endpoint, + &priv_ep->descmis_req->request, + GFP_ATOMIC); + + return; + +err: + dev_err(priv_ep->cdns3_dev->dev, + "Failed: No sufficient memory for DESCMIS\n"); +} + +/** + * cdns3_gadget_giveback - call struct usb_request's ->complete callback + * @priv_ep: The endpoint to whom the request belongs to + * @priv_req: The request we're giving back + * @status: completion code for the request + * + * Must be called with controller's lock held and interrupts disabled. This + * function will unmap @req and call its ->complete() callback to notify upper + * layers that it has completed. + */ +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req, + int status) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct usb_request *request = &priv_req->request; + + list_del_init(&request->list); + + if (request->status == -EINPROGRESS) + request->status = status; + + usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request, + priv_ep->dir); + + if ((priv_req->flags & REQUEST_UNALIGNED) && + priv_ep->dir == USB_DIR_OUT && !request->status) + memcpy(request->buf, priv_req->aligned_buf->buf, + request->length); + + priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED); + trace_cdns3_gadget_giveback(priv_req); + + if (priv_dev->dev_ver < DEV_VER_V2) { + request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep, + priv_req); + if (!request) + return; + } + + if (request->complete) { + spin_unlock(&priv_dev->lock); + usb_gadget_giveback_request(&priv_ep->endpoint, + request); + spin_lock(&priv_dev->lock); + } + + if (request->buf == priv_dev->zlp_buf) + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); +} + +void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + /* Work around for stale data address in TRB*/ + if (priv_ep->wa1_set) { + cdns3_dbg(priv_dev, "WA1: update cycle bit\n"); + priv_ep->wa1_set = 0; + priv_ep->wa1_trb_index = 0xFFFF; + if (priv_ep->wa1_cycle_bit) { + priv_ep->wa1_trb->control = + priv_ep->wa1_trb->control | 0x1; + } else { + priv_ep->wa1_trb->control = + priv_ep->wa1_trb->control & ~0x1; + } + } +} + +static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req) +{ + struct cdns3_endpoint *priv_ep = priv_req->priv_ep; + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_aligned_buf *buf; + + /* check if buffer is aligned to 8. */ + if (!((uintptr_t)priv_req->request.buf & 0x7)) + return 0; + + buf = priv_req->aligned_buf; + + if (!buf || priv_req->request.length > buf->size) { + buf = kzalloc(sizeof(*buf), GFP_ATOMIC); + if (!buf) + return -ENOMEM; + + buf->size = priv_req->request.length; + + buf->buf = dma_alloc_coherent(priv_dev->sysdev, + buf->size, + &buf->dma, + GFP_ATOMIC); + if (!buf->buf) { + kfree(buf); + return -ENOMEM; + } + + if (priv_req->aligned_buf) { + trace_cdns3_free_aligned_request(priv_req); + priv_req->aligned_buf->in_use = 0; + priv_dev->run_garbage_colector = 1; + } + + buf->in_use = 1; + priv_req->aligned_buf = buf; + + list_add_tail(&buf->list, + &priv_dev->aligned_buf_list); + } + + if (priv_ep->dir == USB_DIR_IN) { + memcpy(buf->buf, priv_req->request.buf, + priv_req->request.length); + } + + priv_req->flags |= REQUEST_UNALIGNED; + trace_cdns3_prepare_aligned_request(priv_req); + + return 0; +} + +static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (!priv_ep->wa1_set) { + u32 doorbell; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + + if (doorbell) { + priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0; + priv_ep->wa1_set = 1; + priv_ep->wa1_trb = trb; + priv_ep->wa1_trb_index = priv_ep->enqueue; + cdns3_dbg(priv_dev, "WA1 set guard\n"); + return 0; + } + } + return 1; +} + +static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + int dma_index; + u32 doorbell; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + dma_index = cdns3_get_dma_pos(priv_dev, priv_ep); + + if (!doorbell || dma_index != priv_ep->wa1_trb_index) + cdns3_wa1_restore_cycle_bit(priv_ep); +} + +/** + * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware + * @priv_ep: endpoint object + * + * Returns zero on success or negative value on failure + */ +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + struct cdns3_trb *trb; + dma_addr_t trb_dma; + u32 togle_pcs = 1; + int sg_iter = 0; + int num_trb; + int address; + u32 control; + int pcs; + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) + num_trb = priv_ep->interval; + else + num_trb = request->num_sgs ? request->num_sgs : 1; + + if (num_trb > priv_ep->free_trbs) { + priv_ep->flags |= EP_RING_FULL; + return -ENOBUFS; + } + + priv_req = to_cdns3_request(request); + address = priv_ep->endpoint.desc->bEndpointAddress; + + priv_ep->flags |= EP_PENDING_REQUEST; + + /* must allocate buffer aligned to 8 */ + if (priv_req->flags & REQUEST_UNALIGNED) + trb_dma = priv_req->aligned_buf->dma; + else + trb_dma = request->dma; + + trb = priv_ep->trb_pool + priv_ep->enqueue; + priv_req->start_trb = priv_ep->enqueue; + priv_req->trb = trb; + + cdns3_select_ep(priv_ep->cdns3_dev, address); + + /* prepare ring */ + if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) { + struct cdns3_trb *link_trb; + int doorbell, dma_index; + u32 ch_bit = 0; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + dma_index = cdns3_get_dma_pos(priv_dev, priv_ep); + + /* Driver can't update LINK TRB if it is current processed. */ + if (doorbell && dma_index == priv_ep->num_trbs - 1) { + priv_ep->flags |= EP_DEFERRED_DRDY; + return -ENOBUFS; + } + + /*updating C bt in Link TRB before starting DMA*/ + link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1); + /* + * For TRs size equal 2 enabling TRB_CHAIN for epXin causes + * that DMA stuck at the LINK TRB. + * On the other hand, removing TRB_CHAIN for longer TRs for + * epXout cause that DMA stuck after handling LINK TRB. + * To eliminate this strange behavioral driver set TRB_CHAIN + * bit only for TR size > 2. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC || + TRBS_PER_SEGMENT > 2) + ch_bit = TRB_CHAIN; + + link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) | + TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit; + } + + if (priv_dev->dev_ver <= DEV_VER_V2) + togle_pcs = cdns3_wa1_update_guard(priv_ep, trb); + + /* set incorrect Cycle Bit for first trb*/ + control = priv_ep->pcs ? 0 : TRB_CYCLE; + + do { + u32 length; + u16 td_size = 0; + + /* fill TRB */ + control |= TRB_TYPE(TRB_NORMAL); + trb->buffer = TRB_BUFFER(request->num_sgs == 0 + ? trb_dma : request->sg[sg_iter].dma_address); + + if (likely(!request->num_sgs)) + length = request->length; + else + length = request->sg[sg_iter].length; + + if (likely(priv_dev->dev_ver >= DEV_VER_V2)) + td_size = DIV_ROUND_UP(length, + priv_ep->endpoint.maxpacket); + + trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) | + TRB_LEN(length); + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + trb->length |= TRB_TDL_SS_SIZE(td_size); + else + control |= TRB_TDL_HS_SIZE(td_size); + + pcs = priv_ep->pcs ? TRB_CYCLE : 0; + + /* + * first trb should be prepared as last to avoid processing + * transfer to early + */ + if (sg_iter != 0) + control |= pcs; + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) { + control |= TRB_IOC | TRB_ISP; + } else { + /* for last element in TD or in SG list */ + if (sg_iter == (num_trb - 1) && sg_iter != 0) + control |= pcs | TRB_IOC | TRB_ISP; + } + + if (sg_iter) + trb->control = control; + else + priv_req->trb->control = control; + + control = 0; + ++sg_iter; + priv_req->end_trb = priv_ep->enqueue; + cdns3_ep_inc_enq(priv_ep); + trb = priv_ep->trb_pool + priv_ep->enqueue; + } while (sg_iter < num_trb); + + trb = priv_req->trb; + + priv_req->flags |= REQUEST_PENDING; + + if (sg_iter == 1) + trb->control |= TRB_IOC | TRB_ISP; + /* + * Memory barrier - cycle bit must be set before other filds in trb. + */ + wmb(); + + /* give the TD to the consumer*/ + if (togle_pcs) + trb->control = trb->control ^ 1; + + if (priv_dev->dev_ver <= DEV_VER_V2) + cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep); + + trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + + /* + * Memory barrier - Cycle Bit must be set before trb->length and + * trb->buffer fields. + */ + wmb(); + + /* + * For DMULT mode we can set address to transfer ring only once after + * enabling endpoint. + */ + if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) { + /* + * Until SW is not ready to handle the OUT transfer the ISO OUT + * Endpoint should be disabled (EP_CFG.ENABLE = 0). + * EP_CFG_ENABLE must be set before updating ep_traddr. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir && + !(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) { + priv_ep->flags |= EP_QUIRK_ISO_OUT_EN; + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, + EP_CFG_ENABLE); + } + + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma + + priv_req->start_trb * TRB_SIZE), + &priv_dev->regs->ep_traddr); + + cdns3_dbg(priv_ep->cdns3_dev, "Update ep_trbaddr for %s to %08x\n", + priv_ep->name, readl(&priv_dev->regs->ep_traddr)); + + priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR; + } + + if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALL)) { + trace_cdns3_ring(priv_ep); + /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ + writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } + + /* WORKAROUND for transition to L0 */ + __cdns3_gadget_wakeup(priv_dev); + + return 0; +} + +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) +{ + struct cdns3_endpoint *priv_ep; + struct usb_ep *ep; + int result = 0; + + if (priv_dev->hw_configured_flag) + return; + + writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf); + writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd); + + cdns3_set_register_bit(&priv_dev->regs->usb_conf, + USB_CONF_U1EN | USB_CONF_U2EN); + + /* wait until configuration set */ + result = cdns3_handshake(&priv_dev->regs->usb_sts, + USB_STS_CFGSTS_MASK, 1, 100); + + priv_dev->hw_configured_flag = 1; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + if (ep->enabled) { + priv_ep = ep_to_cdns3_ep(ep); + cdns3_start_all_request(priv_dev, priv_ep); + } + } +} + +/** + * cdns3_request_handled - check whether request has been handled by DMA + * + * @priv_ep: extended endpoint object. + * @priv_req: request object for checking + * + * Endpoint must be selected before invoking this function. + * + * Returns false if request has not been handled by DMA, else returns true. + * + * SR - start ring + * ER - end ring + * DQ = priv_ep->dequeue - dequeue position + * EQ = priv_ep->enqueue - enqueue position + * ST = priv_req->start_trb - index of first TRB in transfer ring + * ET = priv_req->end_trb - index of last TRB in transfer ring + * CI = current_index - index of processed TRB by DMA. + * + * As first step, function checks if cycle bit for priv_req->start_trb is + * correct. + * + * some rules: + * 1. priv_ep->dequeue never exceed current_index. + * 2 priv_ep->enqueue never exceed priv_ep->dequeue + * 3. exception: priv_ep->enqueue == priv_ep->dequeue + * and priv_ep->free_trbs is zero. + * This case indicate that TR is full. + * + * Then We can split recognition into two parts: + * Case 1 - priv_ep->dequeue < current_index + * SR ... EQ ... DQ ... CI ... ER + * SR ... DQ ... CI ... EQ ... ER + * + * Request has been handled by DMA if ST and ET is between DQ and CI. + * + * Case 2 - priv_ep->dequeue > current_index + * This situation take place when CI go through the LINK TRB at the end of + * transfer ring. + * SR ... CI ... EQ ... DQ ... ER + * + * Request has been handled by DMA if ET is less then CI or + * ET is greater or equal DQ. + */ +static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_trb *trb = priv_req->trb; + int current_index = 0; + int handled = 0; + int doorbell; + + current_index = cdns3_get_dma_pos(priv_dev, priv_ep); + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + + trb = &priv_ep->trb_pool[priv_req->start_trb]; + + if ((trb->control & TRB_CYCLE) != priv_ep->ccs) + goto finish; + + if (doorbell == 1 && current_index == priv_ep->dequeue) + goto finish; + + /* The corner case for TRBS_PER_SEGMENT equal 2). */ + if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + handled = 1; + goto finish; + } + + if (priv_ep->enqueue == priv_ep->dequeue && + priv_ep->free_trbs == 0) { + handled = 1; + } else if (priv_ep->dequeue < current_index) { + if ((current_index == (priv_ep->num_trbs - 1)) && + !priv_ep->dequeue) + goto finish; + + if (priv_req->end_trb >= priv_ep->dequeue && + priv_req->end_trb < current_index) + handled = 1; + } else if (priv_ep->dequeue > current_index) { + if (priv_req->end_trb < current_index || + priv_req->end_trb >= priv_ep->dequeue) + handled = 1; + } + +finish: + trace_cdns3_request_handled(priv_req, current_index, handled); + + return handled; +} + +static void cdns3_transfer_completed(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + struct usb_request *request; + struct cdns3_trb *trb; + + while (!list_empty(&priv_ep->pending_req_list)) { + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_req = to_cdns3_request(request); + + /* Re-select endpoint. It could be changed by other CPU during + * handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + if (!cdns3_request_handled(priv_ep, priv_req)) + goto prepare_next_td; + + trb = priv_ep->trb_pool + priv_ep->dequeue; + trace_cdns3_complete_trb(priv_ep, trb); + + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); + + request->actual = TRB_LEN(le32_to_cpu(trb->length)); + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, 0); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && + TRBS_PER_SEGMENT == 2) + break; + } + priv_ep->flags &= ~EP_PENDING_REQUEST; + +prepare_next_td: + cdns3_start_all_request(priv_dev, priv_ep); +} + +void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + cdns3_wa1_restore_cycle_bit(priv_ep); + + if (rearm) { + trace_cdns3_ring(priv_ep); + + /* Cycle Bit must be updated before arming DMA. */ + wmb(); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + + __cdns3_gadget_wakeup(priv_dev); + + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } +} + +/** + * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint + * @priv_ep: endpoint object + * + * Returns 0 + */ +static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + trace_cdns3_epx_irq(priv_dev, priv_ep); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + writel(ep_sts_reg, &priv_dev->regs->ep_sts); + + if (ep_sts_reg & EP_STS_TRBERR) { + /* + * For isochronous transfer driver completes request on + * IOC or on TRBERR. IOC appears only when device receive + * OUT data packet. If host disable stream or lost some packet + * then the only way to finish all queued transfer is to do it + * on TRBERR event. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && + !priv_ep->wa1_set) { + if (!priv_ep->dir) { + u32 ep_cfg = readl(&priv_dev->regs->ep_cfg); + + ep_cfg &= ~EP_CFG_ENABLE; + writel(ep_cfg, &priv_dev->regs->ep_cfg); + priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN; + } + cdns3_transfer_completed(priv_dev, priv_ep); + } else { + if (priv_ep->flags & EP_DEFERRED_DRDY) { + priv_ep->flags &= ~EP_DEFERRED_DRDY; + cdns3_start_all_request(priv_dev, priv_ep); + } else { + cdns3_rearm_transfer(priv_ep, priv_ep->wa1_set); + } + } + } + + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { + if (ep_sts_reg & EP_STS_ISP) + priv_ep->flags |= EP_QUIRK_END_TRANSFER; + else + priv_ep->flags &= ~EP_QUIRK_END_TRANSFER; + } + + cdns3_transfer_completed(priv_dev, priv_ep); + } + + /* + * WA2: this condition should only be meet when + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN. + * In other cases this interrupt will be disabled/ + */ + if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2) + cdns3_wa2_descmissing_packet(priv_ep); + + return 0; +} + +/** + * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device + * @priv_dev: extended gadget object + * @usb_ists: bitmap representation of device's reported interrupts + * (usb_ists register value) + */ +static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, + u32 usb_ists) +{ + int speed = 0; + + trace_cdns3_usb_irq(priv_dev, usb_ists); + if (usb_ists & USB_ISTS_L1ENTI) { + /* + * WORKAROUND: CDNS3 controller has issue with hardware resuming + * from L1. To fix it, if any DMA transfer is pending driver + * must starts driving resume signal immediately. + */ + if (readl(&priv_dev->regs->drbl)) + __cdns3_gadget_wakeup(priv_dev); + } + + /* Connection detected */ + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) { + speed = cdns3_get_speed(priv_dev); + priv_dev->gadget.speed = speed; + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED); + cdns3_ep0_config(priv_dev); + } + + /* Disconnection detected */ + if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) { + if (priv_dev->gadget_driver && + priv_dev->gadget_driver->disconnect) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->disconnect(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } + + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED); + cdns3_hw_reset_eps_config(priv_dev); + } + + if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) { + if (priv_dev->gadget_driver && + priv_dev->gadget_driver->suspend) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->suspend(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } + } + + if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) { + if (priv_dev->gadget_driver && + priv_dev->gadget_driver->resume) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->resume(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } + } + + /* reset*/ + if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) { + if (priv_dev->gadget_driver) { + spin_unlock(&priv_dev->lock); + usb_gadget_udc_reset(&priv_dev->gadget, + priv_dev->gadget_driver); + spin_lock(&priv_dev->lock); + + /*read again to check the actual speed*/ + speed = cdns3_get_speed(priv_dev); + priv_dev->gadget.speed = speed; + cdns3_hw_reset_eps_config(priv_dev); + cdns3_ep0_config(priv_dev); + } + } +} + +/** + * cdns3_device_irq_handler- interrupt handler for device part of controller + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_device_irq_handler(int irq, void *data) +{ + struct cdns3_device *priv_dev; + struct cdns3 *cdns = data; + irqreturn_t ret = IRQ_NONE; + unsigned long flags; + u32 reg; + + priv_dev = cdns->gadget_dev; + spin_lock_irqsave(&priv_dev->lock, flags); + + /* check USB device interrupt */ + reg = readl(&priv_dev->regs->usb_ists); + + if (reg) { + writel(reg, &priv_dev->regs->usb_ists); + cdns3_check_usb_interrupt_proceed(priv_dev, reg); + ret = IRQ_HANDLED; + } + + /* check endpoint interrupt */ + reg = readl(&priv_dev->regs->ep_ists); + + if (reg) { + priv_dev->shadow_ep_en |= reg; + reg = ~reg & readl(&priv_dev->regs->ep_ien); + /* mask deferred interrupt. */ + writel(reg, &priv_dev->regs->ep_ien); + ret = IRQ_WAKE_THREAD; + } + + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * cdns3_device_thread_irq_handler- interrupt handler for device part + * of controller + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) +{ + struct cdns3_device *priv_dev; + struct cdns3 *cdns = data; + irqreturn_t ret = IRQ_NONE; + unsigned long flags; + u32 ep_ien; + int bit; + u32 reg; + + priv_dev = cdns->gadget_dev; + spin_lock_irqsave(&priv_dev->lock, flags); + + reg = readl(&priv_dev->regs->ep_ists); + + /* handle default endpoint OUT */ + if (reg & EP_ISTS_EP_OUT0) { + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT); + ret = IRQ_HANDLED; + } + + /* handle default endpoint IN */ + if (reg & EP_ISTS_EP_IN0) { + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN); + ret = IRQ_HANDLED; + } + + /* check if interrupt from non default endpoint, if no exit */ + reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0); + if (!reg) + goto irqend; + + for_each_set_bit(bit, (unsigned long *)®, + sizeof(u32) * BITS_PER_BYTE) { + priv_dev->shadow_ep_en |= BIT(bit); + cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]); + ret = IRQ_HANDLED; + } + + if (priv_dev->run_garbage_colector) { + struct cdns3_aligned_buf *buf, *tmp; + + list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, + list) { + if (!buf->in_use) { + list_del(&buf->list); + + spin_unlock_irqrestore(&priv_dev->lock, flags); + dma_free_coherent(priv_dev->sysdev, buf->size, + buf->buf, + buf->dma); + spin_lock_irqsave(&priv_dev->lock, flags); + + kfree(buf); + } + } + + priv_dev->run_garbage_colector = 0; + } + +irqend: + ep_ien = readl(&priv_dev->regs->ep_ien) | priv_dev->shadow_ep_en; + priv_dev->shadow_ep_en = 0; + /* Unmask all handled EP interrupts */ + writel(ep_ien, &priv_dev->regs->ep_ien); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP + * + * The real reservation will occur during write to EP_CFG register, + * this function is used to check if the 'size' reservation is allowed. + * + * @priv_dev: extended gadget object + * @size: the size (KB) for EP would like to allocate + * @is_in: endpoint direction + * + * Return 0 if the required size can met or negative value on failure + */ +static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, + int size, int is_in) +{ + int remained; + + /* 2KB are reserved for EP0*/ + remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2; + + if (is_in) { + if (remained < size) + return -EPERM; + + priv_dev->onchip_used_size += size; + } else { + int required; + + /** + * ALL OUT EPs are shared the same chunk onchip memory, so + * driver checks if it already has assigned enough buffers + */ + if (priv_dev->out_mem_is_allocated >= size) + return 0; + + required = size - priv_dev->out_mem_is_allocated; + + if (required > remained) + return -EPERM; + + priv_dev->out_mem_is_allocated += required; + priv_dev->onchip_used_size += required; + } + + return 0; +} + +void cdns3_configure_dmult(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + + /* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */ + if (priv_dev->dev_ver <= DEV_VER_V2) + writel(USB_CONF_DMULT, ®s->usb_conf); + + if (priv_dev->dev_ver == DEV_VER_V2) + writel(USB_CONF2_EN_TDL_TRB, ®s->usb_conf2); + + if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) { + u32 mask; + + if (priv_ep->dir) + mask = BIT(priv_ep->num + 16); + else + mask = BIT(priv_ep->num); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + cdns3_set_register_bit(®s->tdl_from_trb, mask); + cdns3_set_register_bit(®s->tdl_beh, mask); + cdns3_set_register_bit(®s->tdl_beh2, mask); + cdns3_set_register_bit(®s->dma_adv_td, mask); + } + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) + cdns3_set_register_bit(®s->tdl_from_trb, mask); + + cdns3_set_register_bit(®s->dtrans, mask); + } +} + +/** + * cdns3_ep_config Configure hardware endpoint + * @priv_ep: extended endpoint object + */ +void cdns3_ep_config(struct cdns3_endpoint *priv_ep) +{ + bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + u32 bEndpointAddress = priv_ep->num | priv_ep->dir; + u32 max_packet_size = 0; + u8 maxburst = 0; + u32 ep_cfg = 0; + u8 buffering; + u8 mult = 0; + int ret; + + buffering = CDNS3_EP_BUF_SIZE - 1; + + cdns3_configure_dmult(priv_dev, priv_ep); + + switch (priv_ep->type) { + case USB_ENDPOINT_XFER_INT: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT); + + if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || + priv_dev->dev_ver > DEV_VER_V2) + ep_cfg |= EP_CFG_TDL_CHK; + break; + case USB_ENDPOINT_XFER_BULK: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK); + + if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || + priv_dev->dev_ver > DEV_VER_V2) + ep_cfg |= EP_CFG_TDL_CHK; + break; + default: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); + mult = CDNS3_EP_ISO_HS_MULT - 1; + buffering = mult + 1; + } + + switch (priv_dev->gadget.speed) { + case USB_SPEED_FULL: + max_packet_size = is_iso_ep ? 1023 : 64; + break; + case USB_SPEED_HIGH: + max_packet_size = is_iso_ep ? 1024 : 512; + break; + case USB_SPEED_SUPER: + /* It's limitation that driver assumes in driver. */ + mult = 0; + max_packet_size = 1024; + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { + maxburst = CDNS3_EP_ISO_SS_BURST - 1; + buffering = (mult + 1) * + (maxburst + 1); + + if (priv_ep->interval > 1) + buffering++; + } else { + maxburst = CDNS3_EP_BUF_SIZE - 1; + } + break; + default: + /* all other speed are not supported */ + return; + } + + if (max_packet_size == 1024) + priv_ep->trb_burst_size = 128; + else if (max_packet_size >= 512) + priv_ep->trb_burst_size = 64; + else + priv_ep->trb_burst_size = 16; + + ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1, + !!priv_ep->dir); + if (ret) { + dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n"); + return; + } + + ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | + EP_CFG_MULT(mult) | + EP_CFG_BUFFERING(buffering) | + EP_CFG_MAXBURST(maxburst); + + cdns3_select_ep(priv_dev, bEndpointAddress); + writel(ep_cfg, &priv_dev->regs->ep_cfg); + + dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n", + priv_ep->name, ep_cfg); +} + +/* Find correct direction for HW endpoint according to description */ +static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc, + struct cdns3_endpoint *priv_ep) +{ + return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) || + (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc)); +} + +static struct +cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev, + struct usb_endpoint_descriptor *desc) +{ + struct usb_ep *ep; + struct cdns3_endpoint *priv_ep; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + unsigned long num; + int ret; + /* ep name pattern likes epXin or epXout */ + char c[2] = {ep->name[2], '\0'}; + + ret = kstrtoul(c, 10, &num); + if (ret) + return ERR_PTR(ret); + + priv_ep = ep_to_cdns3_ep(ep); + if (cdns3_ep_dir_is_correct(desc, priv_ep)) { + if (!(priv_ep->flags & EP_CLAIMED)) { + priv_ep->num = num; + return priv_ep; + } + } + } + + return ERR_PTR(-ENOENT); +} + +/* + * Cadence IP has one limitation that all endpoints must be configured + * (Type & MaxPacketSize) before setting configuration through hardware + * register, it means we can't change endpoints configuration after + * set_configuration. + * + * This function set EP_CLAIMED flag which is added when the gadget driver + * uses usb_ep_autoconfig to configure specific endpoint; + * When the udc driver receives set_configurion request, + * it goes through all claimed endpoints, and configure all endpoints + * accordingly. + * + * At usb_ep_ops.enable/disable, we only enable and disable endpoint through + * ep_cfg register which can be changed after set_configuration, and do + * some software operation accordingly. + */ +static struct +usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *comp_desc) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct cdns3_endpoint *priv_ep; + unsigned long flags; + + priv_ep = cdns3_find_available_ep(priv_dev, desc); + if (IS_ERR(priv_ep)) { + dev_err(priv_dev->dev, "no available ep\n"); + return NULL; + } + + dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name); + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_ep->endpoint.desc = desc; + priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT; + priv_ep->type = usb_endpoint_type(desc); + priv_ep->flags |= EP_CLAIMED; + priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; + + spin_unlock_irqrestore(&priv_dev->lock, flags); + return &priv_ep->endpoint; +} + +/** + * cdns3_gadget_ep_alloc_request Allocates request + * @ep: endpoint object associated with request + * @gfp_flags: gfp flags + * + * Returns allocated request address, NULL on allocation error + */ +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_request *priv_req; + + priv_req = kzalloc(sizeof(*priv_req), gfp_flags); + if (!priv_req) + return NULL; + + priv_req->priv_ep = priv_ep; + + trace_cdns3_alloc_request(priv_req); + return &priv_req->request; +} + +/** + * cdns3_gadget_ep_free_request Free memory occupied by request + * @ep: endpoint object associated with request + * @request: request to free memory + */ +void cdns3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct cdns3_request *priv_req = to_cdns3_request(request); + + if (priv_req->aligned_buf) + priv_req->aligned_buf->in_use = 0; + + trace_cdns3_free_request(priv_req); + kfree(priv_req); +} + +/** + * cdns3_gadget_ep_enable Enable endpoint + * @ep: endpoint object + * @desc: endpoint descriptor + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct cdns3_endpoint *priv_ep; + struct cdns3_device *priv_dev; + u32 reg = EP_STS_EN_TRBERREN; + u32 bEndpointAddress; + unsigned long flags; + int enable = 1; + int ret; + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n"); + return -EINVAL; + } + + if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED, + "%s is already enabled\n", priv_ep->name)) + return 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + + priv_ep->endpoint.desc = desc; + priv_ep->type = usb_endpoint_type(desc); + priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; + + if (priv_ep->interval > ISO_MAX_INTERVAL && + priv_ep->type == USB_ENDPOINT_XFER_ISOC) { + dev_err(priv_dev->dev, "Driver is limited to %d period\n", + ISO_MAX_INTERVAL); + + ret = -EINVAL; + goto exit; + } + + ret = cdns3_allocate_trb_pool(priv_ep); + + if (ret) + goto exit; + + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + + trace_cdns3_gadget_ep_enable(priv_ep); + + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + ret = cdns3_handshake(&priv_dev->regs->ep_cmd, + EP_CMD_CSTALL | EP_CMD_EPRST, 0, 1000); + + if (unlikely(ret)) { + cdns3_free_trb_pool(priv_ep); + ret = -EINVAL; + goto exit; + } + + /* enable interrupt for selected endpoint */ + cdns3_set_register_bit(&priv_dev->regs->ep_ien, + BIT(cdns3_ep_addr_to_index(bEndpointAddress))); + + if (priv_dev->dev_ver < DEV_VER_V2) + cdns3_wa2_enable_detection(priv_dev, priv_ep, reg); + + writel(reg, &priv_dev->regs->ep_sts_en); + + /* + * For some versions of controller at some point during ISO OUT traffic + * DMA reads Transfer Ring for the EP which has never got doorbell. + * This issue was detected only on simulation, but to avoid this issue + * driver add protection against it. To fix it driver enable ISO OUT + * endpoint before setting DRBL. This special treatment of ISO OUT + * endpoints are recommended by controller specification. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) + enable = 0; + + if (enable) + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE); + + ep->desc = desc; + priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALL | + EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN); + priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR; + priv_ep->wa1_set = 0; + priv_ep->enqueue = 0; + priv_ep->dequeue = 0; + reg = readl(&priv_dev->regs->ep_sts); + priv_ep->pcs = !!EP_STS_CCS(reg); + priv_ep->ccs = !!EP_STS_CCS(reg); + /* one TRB is reserved for link TRB used in DMULT mode*/ + priv_ep->free_trbs = priv_ep->num_trbs - 1; +exit: + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_disable Disable endpoint + * @ep: endpoint object + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep_disable(struct usb_ep *ep) +{ + struct cdns3_endpoint *priv_ep; + struct cdns3_request *priv_req; + struct cdns3_device *priv_dev; + struct usb_request *request; + unsigned long flags; + int ret = 0; + u32 ep_cfg; + + if (!ep) { + pr_err("usbss: invalid parameters\n"); + return -EINVAL; + } + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED), + "%s is already disabled\n", priv_ep->name)) + return 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + + trace_cdns3_gadget_ep_disable(priv_ep); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + + ep_cfg = readl(&priv_dev->regs->ep_cfg); + ep_cfg &= ~EP_CFG_ENABLE; + writel(ep_cfg, &priv_dev->regs->ep_cfg); + + /** + * Driver needs some time before resetting endpoint. + * It need waits for clearing DBUSY bit or for timeout expired. + * 10us is enough time for controller to stop transfer. + */ + cdns3_handshake(&priv_dev->regs->ep_sts, + EP_STS_DBUSY, 0, 10); + + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + ret = cdns3_handshake(&priv_dev->regs->ep_cmd, + EP_CMD_CSTALL | EP_CMD_EPRST, 0, 1000); + + if (unlikely(ret)) + dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n", + priv_ep->name); + + while (!list_empty(&priv_ep->pending_req_list)) { + request = cdns3_next_request(&priv_ep->pending_req_list); + + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ESHUTDOWN); + } + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + + kfree(priv_req->request.buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, + &priv_req->request); + list_del_init(&priv_req->list); + --priv_ep->wa2_counter; + } + + while (!list_empty(&priv_ep->deferred_req_list)) { + request = cdns3_next_request(&priv_ep->deferred_req_list); + + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ESHUTDOWN); + } + + priv_ep->descmis_req = NULL; + + ep->desc = NULL; + priv_ep->flags &= ~EP_ENABLED; + + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_queue Transfer data on endpoint + * @ep: endpoint object + * @request: request object + * @gfp_flags: gfp flags + * + * Returns 0 on success, error code elsewhere + */ +static int __cdns3_gadget_ep_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + int ret = 0; + + request->actual = 0; + request->status = -EINPROGRESS; + priv_req = to_cdns3_request(request); + trace_cdns3_ep_queue(priv_req); + + if (priv_dev->dev_ver < DEV_VER_V2) { + ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep, + priv_req); + + if (ret == EINPROGRESS) + return 0; + } + + ret = cdns3_prepare_aligned_request_buf(priv_req); + if (ret < 0) + return ret; + + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request, + usb_endpoint_dir_in(ep->desc)); + if (ret) + return ret; + + list_add_tail(&request->list, &priv_ep->deferred_req_list); + + /* + * If hardware endpoint configuration has not been set yet then + * just queue request in deferred list. Transfer will be started in + * cdns3_set_hw_configuration. + */ + if (priv_dev->hw_configured_flag) + cdns3_start_all_request(priv_dev, priv_ep); + + return 0; +} + +static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct usb_request *zlp_request; + struct cdns3_endpoint *priv_ep; + struct cdns3_device *priv_dev; + unsigned long flags; + int ret; + + if (!request || !ep) + return -EINVAL; + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + spin_lock_irqsave(&priv_dev->lock, flags); + + ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags); + + if (ret == 0 && request->zero && request->length && + (request->length % ep->maxpacket == 0)) { + struct cdns3_request *priv_req; + + zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC); + zlp_request->buf = priv_dev->zlp_buf; + zlp_request->length = 0; + + priv_req = to_cdns3_request(zlp_request); + priv_req->flags |= REQUEST_ZLP; + + dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n", + priv_ep->name); + ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags); + } + + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * cdns3_gadget_ep_dequeue Remove request from transfer queue + * @ep: endpoint object associated with request + * @request: request object + * + * Returns 0 on success, error code elsewhere + */ +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct usb_request *req, *req_temp; + struct cdns3_request *priv_req; + struct cdns3_trb *link_trb; + unsigned long flags; + int ret = 0; + + if (!ep || !request || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&priv_dev->lock, flags); + + priv_req = to_cdns3_request(request); + + trace_cdns3_ep_dequeue(priv_req); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + + list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list, + list) { + if (request == req) + goto found; + } + + list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list, + list) { + if (request == req) + goto found; + } + + goto not_found; + +found: + + if (priv_ep->wa1_trb == priv_req->trb) + cdns3_wa1_restore_cycle_bit(priv_ep); + + link_trb = priv_req->trb; + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET); + + /* Update ring */ + request = cdns3_next_request(&priv_ep->deferred_req_list); + if (request) { + priv_req = to_cdns3_request(request); + + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma + + (priv_req->start_trb * TRB_SIZE)); + link_trb->control = (link_trb->control & TRB_CYCLE) | + TRB_TYPE(TRB_LINK) | TRB_CHAIN | TRB_TOGGLE; + } else { + priv_ep->flags |= EP_UPDATE_EP_TRBADDR; + } + +not_found: + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint + * @ep: endpoint object to set/clear stall on + * @value: 1 for set stall, 0 for clear stall + * + * Returns 0 on success, error code elsewhere + */ +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + unsigned long flags; + int ret = 0; + + if (!(priv_ep->flags & EP_ENABLED)) + return -EPERM; + + spin_lock_irqsave(&priv_dev->lock, flags); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + if (value) { + cdns3_ep_stall_flush(priv_ep); + } else { + priv_ep->flags &= ~EP_WEDGE; + + cdns3_dbg(priv_ep->cdns3_dev, "Clear stalled endpoint %s\n", + priv_ep->name); + + writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + /* wait for EPRST cleared */ + ret = cdns3_handshake(&priv_dev->regs->ep_cmd, + EP_CMD_EPRST, 0, 100); + if (unlikely(ret)) { + dev_err(priv_dev->dev, + "Clearing halt condition failed for %s\n", + priv_ep->name); + goto finish; + + } else { + priv_ep->flags &= ~EP_STALL; + } + } + + priv_ep->flags &= ~EP_PENDING_REQUEST; +finish: + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +extern const struct usb_ep_ops cdns3_gadget_ep0_ops; + +static const struct usb_ep_ops cdns3_gadget_ep_ops = { + .enable = cdns3_gadget_ep_enable, + .disable = cdns3_gadget_ep_disable, + .alloc_request = cdns3_gadget_ep_alloc_request, + .free_request = cdns3_gadget_ep_free_request, + .queue = cdns3_gadget_ep_queue, + .dequeue = cdns3_gadget_ep_dequeue, + .set_halt = cdns3_gadget_ep_set_halt, + .set_wedge = cdns3_gadget_ep_set_wedge, +}; + +/** + * cdns3_gadget_get_frame Returns number of actual ITP frame + * @gadget: gadget object + * + * Returns number of actual ITP frame + */ +static int cdns3_gadget_get_frame(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + + return readl(&priv_dev->regs->usb_itpn); +} + +int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev) +{ + enum usb_device_speed speed; + + speed = cdns3_get_speed(priv_dev); + + if (speed >= USB_SPEED_SUPER) + return 0; + + /* Start driving resume signaling to indicate remote wakeup. */ + writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf); + + return 0; +} + +static int cdns3_gadget_wakeup(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + ret = __cdns3_gadget_wakeup(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget, + int is_selfpowered) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_dev->is_selfpowered = !!is_selfpowered; + spin_unlock_irqrestore(&priv_dev->lock, flags); + return 0; +} + +static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + + if (is_on) + writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf); + else + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); + + return 0; +} + +static void cdns3_gadget_config(struct cdns3_device *priv_dev) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + u32 reg; + + cdns3_ep0_config(priv_dev); + + /* enable interrupts for endpoint 0 (in and out) */ + writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, ®s->ep_ien); + + /* + *Driver need modify LFPS minimal U1 Exit time for 0x00024505 revision + * of controller + */ + if (priv_dev->dev_ver == DEV_VER_TI_V1) { + reg = readl(®s->dbg_link1); + + reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK; + reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) | + DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET; + writel(reg, ®s->dbg_link1); + } + + /* + * By default some platforms has set protected access to memory. + * This cause problem with cache, so driver restore non-secure + * access to memory. + */ + reg = readl(®s->dma_axi_ctrl); + reg = DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) | + DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE); + writel(reg, ®s->dma_axi_ctrl); + + /* enable generic interrupt*/ + writel(USB_IEN_INIT, ®s->usb_ien); + writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, ®s->usb_conf); + + cdns3_configure_dmult(priv_dev, NULL); + + cdns3_gadget_pullup(&priv_dev->gadget, 1); +} + +/** + * cdns3_gadget_udc_start Gadget start + * @gadget: gadget object + * @driver: driver which operates on this gadget + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_dev->gadget_driver = driver; + cdns3_gadget_config(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return 0; +} + +/** + * cdns3_gadget_udc_stop Stops gadget + * @gadget: gadget object + * + * Returns 0 + */ +static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct cdns3_endpoint *priv_ep; + u32 bEndpointAddress; + struct usb_ep *ep; + int ret = 0; + + priv_dev->gadget_driver = NULL; + + priv_dev->onchip_used_size = 0; + priv_dev->out_mem_is_allocated = 0; + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + priv_ep = ep_to_cdns3_ep(ep); + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + ret = cdns3_handshake(&priv_dev->regs->ep_cmd, + EP_CMD_EPRST, 0, 100); + cdns3_free_trb_pool(priv_ep); + } + + /* disable interrupt for device */ + writel(0, &priv_dev->regs->usb_ien); + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); + + return ret; +} + +static const struct usb_gadget_ops cdns3_gadget_ops = { + .get_frame = cdns3_gadget_get_frame, + .wakeup = cdns3_gadget_wakeup, + .set_selfpowered = cdns3_gadget_set_selfpowered, + .pullup = cdns3_gadget_pullup, + .udc_start = cdns3_gadget_udc_start, + .udc_stop = cdns3_gadget_udc_stop, + .match_ep = cdns3_gadget_match_ep, +}; + +static void cdns3_free_all_eps(struct cdns3_device *priv_dev) +{ + int i; + + /*ep0 OUT point to ep0 IN*/ + priv_dev->eps[16] = NULL; + + cdns3_free_trb_pool(priv_dev->eps[0]); + + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) + if (priv_dev->eps[i]) + devm_kfree(priv_dev->dev, priv_dev->eps[i]); +} + +/** + * cdns3_init_eps Initializes software endpoints of gadget + * @cdns3: extended gadget object + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_init_eps(struct cdns3_device *priv_dev) +{ + u32 ep_enabled_reg, iso_ep_reg; + struct cdns3_endpoint *priv_ep; + int ep_dir, ep_number; + u32 ep_mask; + int ret = 0; + int i; + + /* Read it from USB_CAP3 to USB_CAP5 */ + ep_enabled_reg = readl(&priv_dev->regs->usb_cap3); + iso_ep_reg = readl(&priv_dev->regs->usb_cap4); + + dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n"); + + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { + ep_dir = i >> 4; /* i div 16 */ + ep_number = i & 0xF; /* i % 16 */ + ep_mask = BIT(i); + + if (!(ep_enabled_reg & ep_mask)) + continue; + + if (ep_dir && !ep_number) { + priv_dev->eps[i] = priv_dev->eps[0]; + continue; + } + + priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep), + GFP_KERNEL); + if (!priv_ep) { + ret = -ENOMEM; + goto err; + } + + /* set parent of endpoint object */ + priv_ep->cdns3_dev = priv_dev; + priv_dev->eps[i] = priv_ep; + priv_ep->num = ep_number; + priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT; + + if (!ep_number) { + ret = cdns3_init_ep0(priv_dev, priv_ep); + if (ret) { + dev_err(priv_dev->dev, "Failed to init ep0\n"); + goto err; + } + } else { + snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s", + ep_number, !!ep_dir ? "in" : "out"); + priv_ep->endpoint.name = priv_ep->name; + + usb_ep_set_maxpacket_limit(&priv_ep->endpoint, + CDNS3_EP_MAX_PACKET_LIMIT); + priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS; + priv_ep->endpoint.ops = &cdns3_gadget_ep_ops; + if (ep_dir) + priv_ep->endpoint.caps.dir_in = 1; + else + priv_ep->endpoint.caps.dir_out = 1; + + if (iso_ep_reg & ep_mask) + priv_ep->endpoint.caps.type_iso = 1; + + priv_ep->endpoint.caps.type_bulk = 1; + priv_ep->endpoint.caps.type_int = 1; + + list_add_tail(&priv_ep->endpoint.ep_list, + &priv_dev->gadget.ep_list); + } + + priv_ep->flags = 0; + + dev_info(priv_dev->dev, "Initialized %s support: %s %s\n", + priv_ep->name, + priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "", + priv_ep->endpoint.caps.type_iso ? "ISO" : ""); + + INIT_LIST_HEAD(&priv_ep->pending_req_list); + INIT_LIST_HEAD(&priv_ep->deferred_req_list); + INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list); + } + + return 0; +err: + cdns3_free_all_eps(priv_dev); + return -ENOMEM; +} + +void cdns3_gadget_exit(struct cdns3 *cdns) +{ + struct cdns3_device *priv_dev; + + priv_dev = cdns->gadget_dev; + + devm_free_irq(cdns->dev, cdns->dev_irq, cdns); + + pm_runtime_mark_last_busy(cdns->dev); + pm_runtime_put_autosuspend(cdns->dev); + + usb_del_gadget_udc(&priv_dev->gadget); + + cdns3_free_all_eps(priv_dev); + + while (!list_empty(&priv_dev->aligned_buf_list)) { + struct cdns3_aligned_buf *buf; + + buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list); + dma_free_coherent(priv_dev->sysdev, buf->size, + buf->buf, + buf->dma); + + list_del(&buf->list); + kfree(buf); + } + + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf, + priv_dev->setup_dma); + + kfree(priv_dev->zlp_buf); + kfree(priv_dev); + cdns->gadget_dev = NULL; + cdns3_drd_switch_gadget(cdns, 0); +} + +static int cdns3_gadget_start(struct cdns3 *cdns) +{ + struct cdns3_device *priv_dev; + u32 max_speed; + int ret; + + priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL); + if (!priv_dev) + return -ENOMEM; + + cdns->gadget_dev = priv_dev; + priv_dev->sysdev = cdns->dev; + priv_dev->dev = cdns->dev; + priv_dev->regs = cdns->dev_regs; + + device_property_read_u16(priv_dev->dev, "cdns,on-chip-buff-size", + &priv_dev->onchip_buffers); + + if (priv_dev->onchip_buffers <= 0) { + u32 reg = readl(&priv_dev->regs->usb_cap2); + + priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg); + } + + if (!priv_dev->onchip_buffers) + priv_dev->onchip_buffers = 256; + + max_speed = usb_get_maximum_speed(cdns->dev); + + /* Check the maximum_speed parameter */ + switch (max_speed) { + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + break; + default: + dev_err(cdns->dev, "invalid maximum_speed parameter %d\n", + max_speed); + /* fall through */ + case USB_SPEED_UNKNOWN: + /* default to superspeed */ + max_speed = USB_SPEED_SUPER; + break; + } + + /* fill gadget fields */ + priv_dev->gadget.max_speed = max_speed; + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + priv_dev->gadget.ops = &cdns3_gadget_ops; + priv_dev->gadget.name = "usb-ss-gadget"; + priv_dev->gadget.sg_supported = 1; + + spin_lock_init(&priv_dev->lock); + INIT_WORK(&priv_dev->pending_status_wq, + cdns3_pending_setup_status_handler); + + /* initialize endpoint container */ + INIT_LIST_HEAD(&priv_dev->gadget.ep_list); + INIT_LIST_HEAD(&priv_dev->aligned_buf_list); + + ret = cdns3_init_eps(priv_dev); + if (ret) { + dev_err(priv_dev->dev, "Failed to create endpoints\n"); + goto err1; + } + + /* allocate memory for setup packet buffer */ + priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8, + &priv_dev->setup_dma, GFP_DMA); + if (!priv_dev->setup_buf) { + ret = -ENOMEM; + goto err2; + } + + priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6); + + dev_dbg(priv_dev->dev, "Device Controller version: %08x\n", + readl(&priv_dev->regs->usb_cap6)); + dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n", + readl(&priv_dev->regs->usb_cap1)); + dev_dbg(priv_dev->dev, "On-Chip memory cnfiguration: %08x\n", + readl(&priv_dev->regs->usb_cap2)); + + priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver); + + priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL); + if (!priv_dev->zlp_buf) { + ret = -ENOMEM; + goto err3; + } + + /* add USB gadget device */ + ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget); + if (ret < 0) { + dev_err(priv_dev->dev, + "Failed to register USB device controller\n"); + goto err4; + } + + return 0; +err4: + kfree(priv_dev->zlp_buf); +err3: + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf, + priv_dev->setup_dma); +err2: + cdns3_free_all_eps(priv_dev); +err1: + cdns->gadget_dev = NULL; + return ret; +} + +static int __cdns3_gadget_init(struct cdns3 *cdns) +{ + struct cdns3_device *priv_dev; + int ret = 0; + + cdns3_drd_switch_gadget(cdns, 1); + pm_runtime_get_sync(cdns->dev); + + ret = cdns3_gadget_start(cdns); + if (ret) + return ret; + + priv_dev = cdns->gadget_dev; + ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq, + cdns3_device_irq_handler, + cdns3_device_thread_irq_handler, + IRQF_SHARED, dev_name(cdns->dev), cdns); + + if (ret) + goto err0; + + return 0; +err0: + cdns3_gadget_exit(cdns); + return ret; +} + +static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup) +{ + cdns3_gadget_exit(cdns); + return 0; +} + +static int cdns3_gadget_resume(struct cdns3 *cdns, bool hibernated) +{ + return cdns3_gadget_start(cdns); +} + +/** + * cdns3_gadget_init - initialize device structure + * + * cdns: cdns3 instance + * + * This function initializes the gadget. + */ +int cdns3_gadget_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = __cdns3_gadget_init; + rdrv->stop = cdns3_gadget_exit; + rdrv->suspend = cdns3_gadget_suspend; + rdrv->resume = cdns3_gadget_resume; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->name = "gadget"; + cdns->roles[CDNS3_ROLE_GADGET] = rdrv; + + return 0; +} diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h new file mode 100644 index 000000000000..42f58048975f --- /dev/null +++ b/drivers/usb/cdns3/gadget.h @@ -0,0 +1,1334 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * USBSS device controller driver header file + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2017-2018 NXP + * + * Author: Pawel Laszczak <pawell@cadence.com> + * Pawel Jez <pjez@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_GADGET +#define __LINUX_CDNS3_GADGET +#include <linux/usb/gadget.h> + +/* + * USBSS-DEV register interface. + * This corresponds to the USBSS Device Controller Interface + */ + +/** + * struct cdns3_usb_regs - device controller registers. + * @usb_conf: Global Configuration Register. + * @usb_sts: Global Status Register. + * @usb_cmd: Global Command Register. + * @usb_itpn: ITP/SOF number Register. + * @usb_lpm: Global Command Register. + * @usb_ien: USB Interrupt Enable Register. + * @usb_ists: USB Interrupt Status Register. + * @ep_sel: Endpoint Select Register. + * @ep_traddr: Endpoint Transfer Ring Address Register. + * @ep_cfg: Endpoint Configuration Register. + * @ep_cmd: Endpoint Command Register. + * @ep_sts: Endpoint Status Register. + * @ep_sts_sid: Endpoint Status Register. + * @ep_sts_en: Endpoint Status Register Enable. + * @drbl: Doorbell Register. + * @ep_ien: EP Interrupt Enable Register. + * @ep_ists: EP Interrupt Status Register. + * @usb_pwr: Global Power Configuration Register. + * @usb_conf2: Global Configuration Register 2. + * @usb_cap1: Capability Register 1. + * @usb_cap2: Capability Register 2. + * @usb_cap3: Capability Register 3. + * @usb_cap4: Capability Register 4. + * @usb_cap5: Capability Register 5. + * @usb_cap6: Capability Register 6. + * @usb_cpkt1: Custom Packet Register 1. + * @usb_cpkt2: Custom Packet Register 2. + * @usb_cpkt3: Custom Packet Register 3. + * @ep_dma_ext_addr: Upper address for DMA operations Register. + * @buf_addr: Address for On-chip Buffer operations Register. + * @buf_data: Data for On-chip Buffer operations Register. + * @buf_ctrl: On-chip Buffer Access Control Registe. + * @dtrans: DMA Transfer Mode Register. + * @tdl_from_trb: Source of TD Configuration Register. + * @tdl_beh: TDL Behavior Configuration Register. + * @ep_tdl: Endpoint TDL Register. + * @tdl_beh2: TDL Behavior 2 Configuration Register. + * @dma_adv_td: DMA Advance TD Configuration Register. + * @reserved1: Reserved. + * @cfg_regs: Configuration registers. + * @reserved2: Reserved. + * @dma_axi_ctrl: AXI Control register. + * @dma_axi_id: AXI ID register. + * @dma_axi_cap: AXI Capability register. + * @dma_axi_ctrl0: AXI Control 0 register. + * @dma_axi_ctrl1: AXI Control 1 register. + */ +struct cdns3_usb_regs { + __le32 usb_conf; + __le32 usb_sts; + __le32 usb_cmd; + __le32 usb_itpn; + __le32 usb_lpm; + __le32 usb_ien; + __le32 usb_ists; + __le32 ep_sel; + __le32 ep_traddr; + __le32 ep_cfg; + __le32 ep_cmd; + __le32 ep_sts; + __le32 ep_sts_sid; + __le32 ep_sts_en; + __le32 drbl; + __le32 ep_ien; + __le32 ep_ists; + __le32 usb_pwr; + __le32 usb_conf2; + __le32 usb_cap1; + __le32 usb_cap2; + __le32 usb_cap3; + __le32 usb_cap4; + __le32 usb_cap5; + __le32 usb_cap6; + __le32 usb_cpkt1; + __le32 usb_cpkt2; + __le32 usb_cpkt3; + __le32 ep_dma_ext_addr; + __le32 buf_addr; + __le32 buf_data; + __le32 buf_ctrl; + __le32 dtrans; + __le32 tdl_from_trb; + __le32 tdl_beh; + __le32 ep_tdl; + __le32 tdl_beh2; + __le32 dma_adv_td; + __le32 reserved1[26]; + __le32 cfg_reg1; + __le32 dbg_link1; + __le32 dbg_link2; + __le32 cfg_regs[74]; + __le32 reserved2[34]; + __le32 dma_axi_ctrl; + __le32 dma_axi_id; + __le32 dma_axi_cap; + __le32 dma_axi_ctrl0; + __le32 dma_axi_ctrl1; +}; + +/* USB_CONF - bitmasks */ +/* Reset USB device configuration. */ +#define USB_CONF_CFGRST BIT(0) +/* Set Configuration. */ +#define USB_CONF_CFGSET BIT(1) +/* Disconnect USB device in SuperSpeed. */ +#define USB_CONF_USB3DIS BIT(3) +/* Disconnect USB device in HS/FS */ +#define USB_CONF_USB2DIS BIT(4) +/* Little Endian access - default */ +#define USB_CONF_LENDIAN BIT(5) +/* + * Big Endian access. Driver assume that byte order for + * SFRs access always is as Little Endian so this bit + * is not used. + */ +#define USB_CONF_BENDIAN BIT(6) +/* Device software reset. */ +#define USB_CONF_SWRST BIT(7) +/* Singular DMA transfer mode. Only for VER < DEV_VER_V3*/ +#define USB_CONF_DSING BIT(8) +/* Multiple DMA transfers mode. Only for VER < DEV_VER_V3 */ +#define USB_CONF_DMULT BIT(9) +/* DMA clock turn-off enable. */ +#define USB_CONF_DMAOFFEN BIT(10) +/* DMA clock turn-off disable. */ +#define USB_CONF_DMAOFFDS BIT(11) +/* Clear Force Full Speed. */ +#define USB_CONF_CFORCE_FS BIT(12) +/* Set Force Full Speed. */ +#define USB_CONF_SFORCE_FS BIT(13) +/* Device enable. */ +#define USB_CONF_DEVEN BIT(14) +/* Device disable. */ +#define USB_CONF_DEVDS BIT(15) +/* L1 LPM state entry enable (used in HS/FS mode). */ +#define USB_CONF_L1EN BIT(16) +/* L1 LPM state entry disable (used in HS/FS mode). */ +#define USB_CONF_L1DS BIT(17) +/* USB 2.0 clock gate disable. */ +#define USB_CONF_CLK2OFFEN BIT(18) +/* USB 2.0 clock gate enable. */ +#define USB_CONF_CLK2OFFDS BIT(19) +/* L0 LPM state entry request (used in HS/FS mode). */ +#define USB_CONF_LGO_L0 BIT(20) +/* USB 3.0 clock gate disable. */ +#define USB_CONF_CLK3OFFEN BIT(21) +/* USB 3.0 clock gate enable. */ +#define USB_CONF_CLK3OFFDS BIT(22) +/* Bit 23 is reserved*/ +/* U1 state entry enable (used in SS mode). */ +#define USB_CONF_U1EN BIT(24) +/* U1 state entry disable (used in SS mode). */ +#define USB_CONF_U1DS BIT(25) +/* U2 state entry enable (used in SS mode). */ +#define USB_CONF_U2EN BIT(26) +/* U2 state entry disable (used in SS mode). */ +#define USB_CONF_U2DS BIT(27) +/* U0 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U0 BIT(28) +/* U1 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U1 BIT(29) +/* U2 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U2 BIT(30) +/* SS.Inactive state entry request (used in SS mode) */ +#define USB_CONF_LGO_SSINACT BIT(31) + +/* USB_STS - bitmasks */ +/* + * Configuration status. + * 1 - device is in the configured state. + * 0 - device is not configured. + */ +#define USB_STS_CFGSTS_MASK BIT(0) +#define USB_STS_CFGSTS(p) ((p) & USB_STS_CFGSTS_MASK) +/* + * On-chip memory overflow. + * 0 - On-chip memory status OK. + * 1 - On-chip memory overflow. + */ +#define USB_STS_OV_MASK BIT(1) +#define USB_STS_OV(p) ((p) & USB_STS_OV_MASK) +/* + * SuperSpeed connection status. + * 0 - USB in SuperSpeed mode disconnected. + * 1 - USB in SuperSpeed mode connected. + */ +#define USB_STS_USB3CONS_MASK BIT(2) +#define USB_STS_USB3CONS(p) ((p) & USB_STS_USB3CONS_MASK) +/* + * DMA transfer configuration status. + * 0 - single request. + * 1 - multiple TRB chain + * Supported only for controller version < DEV_VER_V3 + */ +#define USB_STS_DTRANS_MASK BIT(3) +#define USB_STS_DTRANS(p) ((p) & USB_STS_DTRANS_MASK) +/* + * Device speed. + * 0 - Undefined (value after reset). + * 1 - Low speed + * 2 - Full speed + * 3 - High speed + * 4 - Super speed + */ +#define USB_STS_USBSPEED_MASK GENMASK(6, 4) +#define USB_STS_USBSPEED(p) (((p) & USB_STS_USBSPEED_MASK) >> 4) +#define USB_STS_LS (0x1 << 4) +#define USB_STS_FS (0x2 << 4) +#define USB_STS_HS (0x3 << 4) +#define USB_STS_SS (0x4 << 4) +#define DEV_UNDEFSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4)) +#define DEV_LOWSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS) +#define DEV_FULLSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS) +#define DEV_HIGHSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS) +#define DEV_SUPERSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS) +/* + * Endianness for SFR access. + * 0 - Little Endian order (default after hardware reset). + * 1 - Big Endian order + */ +#define USB_STS_ENDIAN_MASK BIT(7) +#define USB_STS_ENDIAN(p) ((p) & USB_STS_ENDIAN_MASK) +/* + * HS/FS clock turn-off status. + * 0 - hsfs clock is always on. + * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled + * (default after hardware reset). + */ +#define USB_STS_CLK2OFF_MASK BIT(8) +#define USB_STS_CLK2OFF(p) ((p) & USB_STS_CLK2OFF_MASK) +/* + * PCLK clock turn-off status. + * 0 - pclk clock is always on. + * 1 - pclk clock turn-off in U3 (SS mode) is enabled + * (default after hardware reset). + */ +#define USB_STS_CLK3OFF_MASK BIT(9) +#define USB_STS_CLK3OFF(p) ((p) & USB_STS_CLK3OFF_MASK) +/* + * Controller in reset state. + * 0 - Internal reset is active. + * 1 - Internal reset is not active and controller is fully operational. + */ +#define USB_STS_IN_RST_MASK BIT(10) +#define USB_STS_IN_RST(p) ((p) & USB_STS_IN_RST_MASK) +/* + * Status of the "TDL calculation basing on TRB" feature. + * 0 - disabled + * 1 - enabled + * Supported only for DEV_VER_V2 controller version. + */ +#define USB_STS_TDL_TRB_ENABLED BIT(11) +/* + * Device enable Status. + * 0 - USB device is disabled (VBUS input is disconnected from internal logic). + * 1 - USB device is enabled (VBUS input is connected to the internal logic). + */ +#define USB_STS_DEVS_MASK BIT(14) +#define USB_STS_DEVS(p) ((p) & USB_STS_DEVS_MASK) +/* + * Address status. + * 0 - USB device is default state. + * 1 - USB device is at least in address state. + */ +#define USB_STS_ADDRESSED_MASK BIT(15) +#define USB_STS_ADDRESSED(p) ((p) & USB_STS_ADDRESSED_MASK) +/* + * L1 LPM state enable status (used in HS/FS mode). + * 0 - Entering to L1 LPM state disabled. + * 1 - Entering to L1 LPM state enabled. + */ +#define USB_STS_L1ENS_MASK BIT(16) +#define USB_STS_L1ENS(p) ((p) & USB_STS_L1ENS_MASK) +/* + * Internal VBUS connection status (used both in HS/FS and SS mode). + * 0 - internal VBUS is not detected. + * 1 - internal VBUS is detected. + */ +#define USB_STS_VBUSS_MASK BIT(17) +#define USB_STS_VBUSS(p) ((p) & USB_STS_VBUSS_MASK) +/* + * HS/FS LPM state (used in FS/HS mode). + * 0 - L0 State + * 1 - L1 State + * 2 - L2 State + * 3 - L3 State + */ +#define USB_STS_LPMST_MASK GENMASK(19, 18) +#define DEV_L0_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x0 << 18)) +#define DEV_L1_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x1 << 18)) +#define DEV_L2_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x2 << 18)) +#define DEV_L3_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x3 << 18)) +/* + * Disable HS status (used in FS/HS mode). + * 0 - the disconnect bit for HS/FS mode is set . + * 1 - the disconnect bit for HS/FS mode is not set. + */ +#define USB_STS_USB2CONS_MASK BIT(20) +#define USB_STS_USB2CONS(p) ((p) & USB_STS_USB2CONS_MASK) +/* + * HS/FS mode connection status (used in FS/HS mode). + * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled. + * 1 - High Speed operations in USB2.0 (FS/HS). + */ +#define USB_STS_DISABLE_HS_MASK BIT(21) +#define USB_STS_DISABLE_HS(p) ((p) & USB_STS_DISABLE_HS_MASK) +/* + * U1 state enable status (used in SS mode). + * 0 - Entering to U1 state disabled. + * 1 - Entering to U1 state enabled. + */ +#define USB_STS_U1ENS_MASK BIT(24) +#define USB_STS_U1ENS(p) ((p) & USB_STS_U1ENS_MASK) +/* + * U2 state enable status (used in SS mode). + * 0 - Entering to U2 state disabled. + * 1 - Entering to U2 state enabled. + */ +#define USB_STS_U2ENS_MASK BIT(25) +#define USB_STS_U2ENS(p) ((p) & USB_STS_U2ENS_MASK) +/* + * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current + * SuperSpeed link state + */ +#define USB_STS_LST_MASK GENMASK(29, 26) +#define DEV_LST_U0 (((p) & USB_STS_LST_MASK) == (0x0 << 26)) +#define DEV_LST_U1 (((p) & USB_STS_LST_MASK) == (0x1 << 26)) +#define DEV_LST_U2 (((p) & USB_STS_LST_MASK) == (0x2 << 26)) +#define DEV_LST_U3 (((p) & USB_STS_LST_MASK) == (0x3 << 26)) +#define DEV_LST_DISABLED (((p) & USB_STS_LST_MASK) == (0x4 << 26)) +#define DEV_LST_RXDETECT (((p) & USB_STS_LST_MASK) == (0x5 << 26)) +#define DEV_LST_INACTIVE (((p) & USB_STS_LST_MASK) == (0x6 << 26)) +#define DEV_LST_POLLING (((p) & USB_STS_LST_MASK) == (0x7 << 26)) +#define DEV_LST_RECOVERY (((p) & USB_STS_LST_MASK) == (0x8 << 26)) +#define DEV_LST_HOT_RESET (((p) & USB_STS_LST_MASK) == (0x9 << 26)) +#define DEV_LST_COMP_MODE (((p) & USB_STS_LST_MASK) == (0xa << 26)) +#define DEV_LST_LB_STATE (((p) & USB_STS_LST_MASK) == (0xb << 26)) +/* + * DMA clock turn-off status. + * 0 - DMA clock is always on (default after hardware reset). + * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled. + */ +#define USB_STS_DMAOFF_MASK BIT(30) +#define USB_STS_DMAOFF(p) ((p) & USB_STS_DMAOFF_MASK) +/* + * SFR Endian status. + * 0 - Little Endian order (default after hardware reset). + * 1 - Big Endian order. + */ +#define USB_STS_ENDIAN2_MASK BIT(31) +#define USB_STS_ENDIAN2(p) ((p) & USB_STS_ENDIAN2_MASK) + +/* USB_CMD - bitmasks */ +/* Set Function Address */ +#define USB_CMD_SET_ADDR BIT(0) +/* + * Function Address This field is saved to the device only when the field + * SET_ADDR is set '1 ' during write to USB_CMD register. + * Software is responsible for entering the address of the device during + * SET_ADDRESS request service. This field should be set immediately after + * the SETUP packet is decoded, and prior to confirmation of the status phase + */ +#define USB_CMD_FADDR_MASK GENMASK(7, 1) +#define USB_CMD_FADDR(p) (((p) << 1) & USB_CMD_FADDR_MASK) +/* Send Function Wake Device Notification TP (used only in SS mode). */ +#define USB_CMD_SDNFW BIT(8) +/* Set Test Mode (used only in HS/FS mode). */ +#define USB_CMD_STMODE BIT(9) +/* Test mode selector (used only in HS/FS mode) */ +#define USB_STS_TMODE_SEL_MASK GENMASK(11, 10) +#define USB_STS_TMODE_SEL(p) (((p) << 10) & USB_STS_TMODE_SEL_MASK) +/* + * Send Latency Tolerance Message Device Notification TP (used only + * in SS mode). + */ +#define USB_CMD_SDNLTM BIT(12) +/* Send Custom Transaction Packet (used only in SS mode) */ +#define USB_CMD_SPKT BIT(13) +/*Device Notification 'Function Wake' - Interface value (only in SS mode. */ +#define USB_CMD_DNFW_INT_MASK GENMASK(23, 16) +#define USB_STS_DNFW_INT(p) (((p) << 16) & USB_CMD_DNFW_INT_MASK) +/* + * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0] + * (used only in SS mode). + */ +#define USB_CMD_DNLTM_BELT_MASK GENMASK(27, 16) +#define USB_STS_DNLTM_BELT(p) (((p) << 16) & USB_CMD_DNLTM_BELT_MASK) + +/* USB_ITPN - bitmasks */ +/* + * ITP(SS) / SOF (HS/FS) number + * In SS mode this field represent number of last ITP received from host. + * In HS/FS mode this field represent number of last SOF received from host. + */ +#define USB_ITPN_MASK GENMASK(13, 0) +#define USB_ITPN(p) ((p) & USB_ITPN_MASK) + +/* USB_LPM - bitmasks */ +/* Host Initiated Resume Duration. */ +#define USB_LPM_HIRD_MASK GENMASK(3, 0) +#define USB_LPM_HIRD(p) ((p) & USB_LPM_HIRD_MASK) +/* Remote Wakeup Enable (bRemoteWake). */ +#define USB_LPM_BRW BIT(4) + +/* USB_IEN - bitmasks */ +/* SS connection interrupt enable */ +#define USB_IEN_CONIEN BIT(0) +/* SS disconnection interrupt enable. */ +#define USB_IEN_DISIEN BIT(1) +/* USB SS warm reset interrupt enable. */ +#define USB_IEN_UWRESIEN BIT(2) +/* USB SS hot reset interrupt enable */ +#define USB_IEN_UHRESIEN BIT(3) +/* SS link U3 state enter interrupt enable (suspend).*/ +#define USB_IEN_U3ENTIEN BIT(4) +/* SS link U3 state exit interrupt enable (wakeup). */ +#define USB_IEN_U3EXTIEN BIT(5) +/* SS link U2 state enter interrupt enable.*/ +#define USB_IEN_U2ENTIEN BIT(6) +/* SS link U2 state exit interrupt enable.*/ +#define USB_IEN_U2EXTIEN BIT(7) +/* SS link U1 state enter interrupt enable.*/ +#define USB_IEN_U1ENTIEN BIT(8) +/* SS link U1 state exit interrupt enable.*/ +#define USB_IEN_U1EXTIEN BIT(9) +/* ITP/SOF packet detected interrupt enable.*/ +#define USB_IEN_ITPIEN BIT(10) +/* Wakeup interrupt enable.*/ +#define USB_IEN_WAKEIEN BIT(11) +/* Send Custom Packet interrupt enable.*/ +#define USB_IEN_SPKTIEN BIT(12) +/* HS/FS mode connection interrupt enable.*/ +#define USB_IEN_CON2IEN BIT(16) +/* HS/FS mode disconnection interrupt enable.*/ +#define USB_IEN_DIS2IEN BIT(17) +/* USB reset (HS/FS mode) interrupt enable.*/ +#define USB_IEN_U2RESIEN BIT(18) +/* LPM L2 state enter interrupt enable.*/ +#define USB_IEN_L2ENTIEN BIT(20) +/* LPM L2 state exit interrupt enable.*/ +#define USB_IEN_L2EXTIEN BIT(21) +/* LPM L1 state enter interrupt enable.*/ +#define USB_IEN_L1ENTIEN BIT(24) +/* LPM L1 state exit interrupt enable.*/ +#define USB_IEN_L1EXTIEN BIT(25) +/* Configuration reset interrupt enable.*/ +#define USB_IEN_CFGRESIEN BIT(26) +/* Start of the USB SS warm reset interrupt enable.*/ +#define USB_IEN_UWRESSIEN BIT(28) +/* End of the USB SS warm reset interrupt enable.*/ +#define USB_IEN_UWRESEIEN BIT(29) + +#define USB_IEN_INIT (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \ + | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \ + | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \ + | USB_IEN_L2EXTIEN | USB_IEN_L1ENTIEN) + +/* USB_ISTS - bitmasks */ +/* SS Connection detected. */ +#define USB_ISTS_CONI BIT(0) +/* SS Disconnection detected. */ +#define USB_ISTS_DISI BIT(1) +/* UUSB warm reset detectede. */ +#define USB_ISTS_UWRESI BIT(2) +/* USB hot reset detected. */ +#define USB_ISTS_UHRESI BIT(3) +/* U3 link state enter detected (suspend).*/ +#define USB_ISTS_U3ENTI BIT(4) +/* U3 link state exit detected (wakeup). */ +#define USB_ISTS_U3EXTI BIT(5) +/* U2 link state enter detected.*/ +#define USB_ISTS_U2ENTI BIT(6) +/* U2 link state exit detected.*/ +#define USB_ISTS_U2EXTI BIT(7) +/* U1 link state enter detected.*/ +#define USB_ISTS_U1ENTI BIT(8) +/* U1 link state exit detected.*/ +#define USB_ISTS_U1EXTI BIT(9) +/* ITP/SOF packet detected.*/ +#define USB_ISTS_ITPI BIT(10) +/* Wakeup detected.*/ +#define USB_ISTS_WAKEI BIT(11) +/* Send Custom Packet detected.*/ +#define USB_ISTS_SPKTI BIT(12) +/* HS/FS mode connection detected.*/ +#define USB_ISTS_CON2I BIT(16) +/* HS/FS mode disconnection detected.*/ +#define USB_ISTS_DIS2I BIT(17) +/* USB reset (HS/FS mode) detected.*/ +#define USB_ISTS_U2RESI BIT(18) +/* LPM L2 state enter detected.*/ +#define USB_ISTS_L2ENTI BIT(20) +/* LPM L2 state exit detected.*/ +#define USB_ISTS_L2EXTI BIT(21) +/* LPM L1 state enter detected.*/ +#define USB_ISTS_L1ENTI BIT(24) +/* LPM L1 state exit detected.*/ +#define USB_ISTS_L1EXTI BIT(25) +/* USB configuration reset detected.*/ +#define USB_ISTS_CFGRESI BIT(26) +/* Start of the USB warm reset detected.*/ +#define USB_ISTS_UWRESSI BIT(28) +/* End of the USB warm reset detected.*/ +#define USB_ISTS_UWRESEI BIT(29) + +/* USB_SEL - bitmasks */ +#define EP_SEL_EPNO_MASK GENMASK(3, 0) +/* Endpoint number. */ +#define EP_SEL_EPNO(p) ((p) & EP_SEL_EPNO_MASK) +/* Endpoint direction bit - 0 - OUT, 1 - IN. */ +#define EP_SEL_DIR BIT(7) + +#define select_ep_in(nr) (EP_SEL_EPNO(p) | EP_SEL_DIR) +#define select_ep_out (EP_SEL_EPNO(p)) + +/* EP_TRADDR - bitmasks */ +/* Transfer Ring address. */ +#define EP_TRADDR_TRADDR(p) ((p)) + +/* EP_CFG - bitmasks */ +/* Endpoint enable */ +#define EP_CFG_ENABLE BIT(0) +/* + * Endpoint type. + * 1 - isochronous + * 2 - bulk + * 3 - interrupt + */ +#define EP_CFG_EPTYPE_MASK GENMASK(2, 1) +#define EP_CFG_EPTYPE(p) (((p) << 1) & EP_CFG_EPTYPE_MASK) +/* Stream support enable (only in SS mode). */ +#define EP_CFG_STREAM_EN BIT(3) +/* TDL check (only in SS mode for BULK EP). */ +#define EP_CFG_TDL_CHK BIT(4) +/* SID check (only in SS mode for BULK OUT EP). */ +#define EP_CFG_SID_CHK BIT(5) +/* DMA transfer endianness. */ +#define EP_CFG_EPENDIAN BIT(7) +/* Max burst size (used only in SS mode). */ +#define EP_CFG_MAXBURST_MASK GENMASK(11, 8) +#define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) +/* ISO max burst. */ +#define EP_CFG_MULT_MASK GENMASK(15, 14) +#define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) +/* ISO max burst. */ +#define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) +#define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) +/* Max number of buffered packets. */ +#define EP_CFG_BUFFERING_MASK GENMASK(31, 27) +#define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) + +/* EP_CMD - bitmasks */ +/* Endpoint reset. */ +#define EP_CMD_EPRST BIT(0) +/* Endpoint STALL set. */ +#define EP_CMD_SSTALL BIT(1) +/* Endpoint STALL clear. */ +#define EP_CMD_CSTALL BIT(2) +/* Send ERDY TP. */ +#define EP_CMD_ERDY BIT(3) +/* Request complete. */ +#define EP_CMD_REQ_CMPL BIT(5) +/* Transfer descriptor ready. */ +#define EP_CMD_DRDY BIT(6) +/* Data flush. */ +#define EP_CMD_DFLUSH BIT(7) +/* + * Transfer Descriptor Length write (used only for Bulk Stream capable + * endpoints in SS mode). + * Bit Removed from DEV_VER_V3 controller version. + */ +#define EP_CMD_STDL BIT(8) +/* + * Transfer Descriptor Length (used only in SS mode for bulk endpoints). + * Bits Removed from DEV_VER_V3 controller version. + */ +#define EP_CMD_TDL_MASK GENMASK(15, 9) +#define EP_CMD_TDL(p) (((p) << 9) & EP_CMD_TDL_MASK) +/* ERDY Stream ID value (used in SS mode). */ +#define EP_CMD_ERDY_SID_MASK GENMASK(31, 16) +#define EP_CMD_ERDY_SID(p) (((p) << 16) & EP_CMD_SID_MASK) + +/* EP_STS - bitmasks */ +/* Setup transfer complete. */ +#define EP_STS_SETUP BIT(0) +/* Endpoint STALL status. */ +#define EP_STS_STALL(p) ((p) & BIT(1)) +/* Interrupt On Complete. */ +#define EP_STS_IOC BIT(2) +/* Interrupt on Short Packet. */ +#define EP_STS_ISP BIT(3) +/* Transfer descriptor missing. */ +#define EP_STS_DESCMIS BIT(4) +/* Stream Rejected (used only in SS mode) */ +#define EP_STS_STREAMR BIT(5) +/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */ +#define EP_STS_MD_EXIT BIT(6) +/* TRB error. */ +#define EP_STS_TRBERR BIT(7) +/* Not ready (used only in SS mode). */ +#define EP_STS_NRDY BIT(8) +/* DMA busy bit. */ +#define EP_STS_DBUSY BIT(9) +/* Endpoint Buffer Empty */ +#define EP_STS_BUFFEMPTY(p) ((p) & BIT(10)) +/* Current Cycle Status */ +#define EP_STS_CCS(p) ((p) & BIT(11)) +/* Prime (used only in SS mode. */ +#define EP_STS_PRIME BIT(12) +/* Stream error (used only in SS mode). */ +#define EP_STS_SIDERR BIT(13) +/* OUT size mismatch. */ +#define EP_STS_OUTSMM BIT(14) +/* ISO transmission error. */ +#define EP_STS_ISOERR BIT(15) +/* Host Packet Pending (only for SS mode). */ +#define EP_STS_HOSTPP(p) ((p) & BIT(16)) +/* Stream Protocol State Machine State (only for Bulk stream endpoints). */ +#define EP_STS_SPSMST_MASK GENMASK(18, 17) +#define EP_STS_SPSMST_DISABLED(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_IDLE(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_START_STREAM(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_MOVE_DATA(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +/* Interrupt On Transfer complete. */ +#define EP_STS_IOT BIT(19) +/* OUT queue endpoint number. */ +#define EP_STS_OUTQ_NO_MASK GENMASK(27, 24) +#define EP_STS_OUTQ_NO(p) (((p) & EP_STS_OUTQ_NO_MASK) >> 24) +/* OUT queue valid flag. */ +#define EP_STS_OUTQ_VAL_MASK BIT(28) +#define EP_STS_OUTQ_VAL(p) ((p) & EP_STS_OUTQ_VAL_MASK) +/* SETUP WAIT. */ +#define EP_STS_STPWAIT BIT(31) + +/* EP_STS_SID - bitmasks */ +/* Stream ID (used only in SS mode). */ +#define EP_STS_SID_MASK GENMASK(15, 0) +#define EP_STS_SID(p) ((p) & EP_STS_SID_MASK) + +/* EP_STS_EN - bitmasks */ +/* SETUP interrupt enable. */ +#define EP_STS_EN_SETUPEN BIT(0) +/* OUT transfer missing descriptor enable. */ +#define EP_STS_EN_DESCMISEN BIT(4) +/* Stream Rejected enable. */ +#define EP_STS_EN_STREAMREN BIT(5) +/* Move Data Exit enable.*/ +#define EP_STS_EN_MD_EXITEN BIT(6) +/* TRB enable. */ +#define EP_STS_EN_TRBERREN BIT(7) +/* NRDY enable. */ +#define EP_STS_EN_NRDYEN BIT(8) +/* Prime enable. */ +#define EP_STS_EN_PRIMEEEN BIT(12) +/* Stream error enable. */ +#define EP_STS_EN_SIDERREN BIT(13) +/* OUT size mismatch enable. */ +#define EP_STS_EN_OUTSMMEN BIT(14) +/* ISO transmission error enable. */ +#define EP_STS_EN_ISOERREN BIT(15) +/* Interrupt on Transmission complete enable. */ +#define EP_STS_EN_IOTEN BIT(19) +/* Setup Wait interrupt enable. */ +#define EP_STS_EN_STPWAITEN BIT(31) + +/* DRBL- bitmasks */ +#define DB_VALUE_BY_INDEX(index) (1 << (index)) +#define DB_VALUE_EP0_OUT BIT(0) +#define DB_VALUE_EP0_IN BIT(16) + +/* EP_IEN - bitmasks */ +#define EP_IEN(index) (1 << (index)) +#define EP_IEN_EP_OUT0 BIT(0) +#define EP_IEN_EP_IN0 BIT(16) + +/* EP_ISTS - bitmasks */ +#define EP_ISTS(index) (1 << (index)) +#define EP_ISTS_EP_OUT0 BIT(0) +#define EP_ISTS_EP_IN0 BIT(16) + +/* USB_PWR- bitmasks */ +/*Power Shut Off capability enable*/ +#define PUSB_PWR_PSO_EN BIT(0) +/*Power Shut Off capability disable*/ +#define PUSB_PWR_PSO_DS BIT(1) +/* + * Enables turning-off Reference Clock. + * This bit is optional and implemented only when support for OTG is + * implemented (indicated by OTG_READY bit set to '1'). + */ +#define PUSB_PWR_STB_CLK_SWITCH_EN BIT(8) +/* + * Status bit indicating that operation required by STB_CLK_SWITCH_EN write + * is completed + */ +#define PUSB_PWR_STB_CLK_SWITCH_DONE BIT(9) +/* This bit informs if Fast Registers Access is enabled. */ +#define PUSB_PWR_FST_REG_ACCESS_STAT BIT(30) +/* Fast Registers Access Enable. */ +#define PUSB_PWR_FST_REG_ACCESS BIT(31) + +/* USB_CONF2- bitmasks */ +/* + * Writing 1 disables TDL calculation basing on TRB feature in controller + * for DMULT mode. + * Bit supported only for DEV_VER_V2 version. + */ +#define USB_CONF2_DIS_TDL_TRB BIT(1) +/* + * Writing 1 enables TDL calculation basing on TRB feature in controller + * for DMULT mode. + * Bit supported only for DEV_VER_V2 version. + */ +#define USB_CONF2_EN_TDL_TRB BIT(2) + +/* USB_CAP1- bitmasks */ +/* + * SFR Interface type + * These field reflects type of SFR interface implemented: + * 0x0 - OCP + * 0x1 - AHB, + * 0x2 - PLB + * 0x3 - AXI + * 0x4-0xF - reserved + */ +#define USB_CAP1_SFR_TYPE_MASK GENMASK(3, 0) +#define DEV_SFR_TYPE_OCP(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0) +#define DEV_SFR_TYPE_AHB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1) +#define DEV_SFR_TYPE_PLB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2) +#define DEV_SFR_TYPE_AXI(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3) +/* + * SFR Interface width + * These field reflects width of SFR interface implemented: + * 0x0 - 8 bit interface, + * 0x1 - 16 bit interface, + * 0x2 - 32 bit interface + * 0x3 - 64 bit interface + * 0x4-0xF - reserved + */ +#define USB_CAP1_SFR_WIDTH_MASK GENMASK(7, 4) +#define DEV_SFR_WIDTH_8(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4)) +#define DEV_SFR_WIDTH_16(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4)) +#define DEV_SFR_WIDTH_32(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4)) +#define DEV_SFR_WIDTH_64(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4)) +/* + * DMA Interface type + * These field reflects type of DMA interface implemented: + * 0x0 - OCP + * 0x1 - AHB, + * 0x2 - PLB + * 0x3 - AXI + * 0x4-0xF - reserved + */ +#define USB_CAP1_DMA_TYPE_MASK GENMASK(11, 8) +#define DEV_DMA_TYPE_OCP(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8)) +#define DEV_DMA_TYPE_AHB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8)) +#define DEV_DMA_TYPE_PLB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8)) +#define DEV_DMA_TYPE_AXI(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8)) +/* + * DMA Interface width + * These field reflects width of DMA interface implemented: + * 0x0 - reserved, + * 0x1 - reserved, + * 0x2 - 32 bit interface + * 0x3 - 64 bit interface + * 0x4-0xF - reserved + */ +#define USB_CAP1_DMA_WIDTH_MASK GENMASK(15, 12) +#define DEV_DMA_WIDTH_32(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12)) +#define DEV_DMA_WIDTH_64(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12)) +/* + * USB3 PHY Interface type + * These field reflects type of USB3 PHY interface implemented: + * 0x0 - USB PIPE, + * 0x1 - RMMI, + * 0x2-0xF - reserved + */ +#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16) +#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16)) +#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16)) +/* + * USB3 PHY Interface width + * These field reflects width of USB3 PHY interface implemented: + * 0x0 - 8 bit PIPE interface, + * 0x1 - 16 bit PIPE interface, + * 0x2 - 32 bit PIPE interface, + * 0x3 - 64 bit PIPE interface + * 0x4-0xF - reserved + * Note: When SSIC interface is implemented this field shows the width of + * internal PIPE interface. The RMMI interface is always 20bit wide. + */ +#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20) +#define DEV_U3PHY_WIDTH_8(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20)) +#define DEV_U3PHY_WIDTH_16(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16)) +#define DEV_U3PHY_WIDTH_32(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20)) +#define DEV_U3PHY_WIDTH_64(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16)) + +/* + * USB2 PHY Interface enable + * These field informs if USB2 PHY interface is implemented: + * 0x0 - interface NOT implemented, + * 0x1 - interface implemented + */ +#define USB_CAP1_U2PHY_EN(p) ((p) & BIT(24)) +/* + * USB2 PHY Interface type + * These field reflects type of USB2 PHY interface implemented: + * 0x0 - UTMI, + * 0x1 - ULPI + */ +#define DEV_U2PHY_ULPI(p) ((p) & BIT(25)) +/* + * USB2 PHY Interface width + * These field reflects width of USB2 PHY interface implemented: + * 0x0 - 8 bit interface, + * 0x1 - 16 bit interface, + * Note: The ULPI interface is always 8bit wide. + */ +#define DEV_U2PHY_WIDTH_16(p) ((p) & BIT(26)) +/* + * OTG Ready + * 0x0 - pure device mode + * 0x1 - some features and ports for CDNS USB OTG controller are implemented. + */ +#define USB_CAP1_OTG_READY(p) ((p) & BIT(27)) + +/* + * When set, indicates that controller supports automatic internal TDL + * calculation basing on the size provided in TRB (TRB[22:17]) for DMULT mode + * Supported only for DEV_VER_V2 controller version. + */ +#define USB_CAP1_TDL_FROM_TRB(p) ((p) & BIT(28)) + +/* USB_CAP2- bitmasks */ +/* + * The actual size of the connected On-chip RAM memory in kB: + * - 0 means 256 kB (max supported mem size) + * - value other than 0 reflects the mem size in kB + */ +#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0)) +/* + * Max supported mem size + * These field reflects width of on-chip RAM address bus width, + * which determines max supported mem size: + * 0x0-0x7 - reserved, + * 0x8 - support for 4kB mem, + * 0x9 - support for 8kB mem, + * 0xA - support for 16kB mem, + * 0xB - support for 32kB mem, + * 0xC - support for 64kB mem, + * 0xD - support for 128kB mem, + * 0xE - support for 256kB mem, + * 0xF - reserved + */ +#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8)) + +/* USB_CAP3- bitmasks */ +#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP4- bitmasks */ +#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP5- bitmasks */ +#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP6- bitmasks */ +/* The USBSS-DEV Controller Internal build number. */ +#define GET_DEV_BASE_VERSION(p) ((p) & GENMASK(23, 0)) +/* The USBSS-DEV Controller version number. */ +#define GET_DEV_CUSTOM_VERSION(p) ((p) & GENMASK(31, 24)) + +#define DEV_VER_NXP_V1 0x00024502 +#define DEV_VER_TI_V1 0x00024509 +#define DEV_VER_V2 0x0002450C +#define DEV_VER_V3 0x0002450d + +/* DBG_LINK1- bitmasks */ +/* + * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum + * time required for decoding the received LFPS as an LFPS.U1_Exit. + */ +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p) ((p) & GENMASK(7, 0)) +/* + * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for + * phytxelecidle deassertion when LFPS.U1_Exit + */ +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK GENMASK(15, 8) +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p) (((p) << 8) & GENMASK(15, 8)) +/* + * RXDET_BREAK_DIS value This parameter configures terminating the Far-end + * Receiver termination detection sequence: + * 0: it is possible that USBSS_DEV will terminate Farend receiver + * termination detection sequence + * 1: USBSS_DEV will not terminate Far-end receiver termination + * detection sequence + */ +#define DBG_LINK1_RXDET_BREAK_DIS BIT(16) +/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */ +#define DBG_LINK1_LFPS_GEN_PING(p) (((p) << 17) & GENMASK(21, 17)) +/* + * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the + * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET BIT(24) +/* + * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the + * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET BIT(25) +/* + * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes + * the RXDET_BREAK_DIS field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_RXDET_BREAK_DIS_SET BIT(26) +/* + * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes + * the LFPS_GEN_PING field value to the device. This bit is automatically + * cleared. Writing '0' has no effect." + */ +#define DBG_LINK1_LFPS_GEN_PING_SET BIT(27) + +/* DMA_AXI_CTRL- bitmasks */ +/* The mawprot pin configuration. */ +#define DMA_AXI_CTRL_MARPROT(p) ((p) & GENMASK(2, 0)) +/* The marprot pin configuration. */ +#define DMA_AXI_CTRL_MAWPROT(p) (((p) < 16) & GENMASK(18, 16)) +#define DMA_AXI_CTRL_NON_SECURE 0x02 + +#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget)) + +#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint)) + +/*-------------------------------------------------------------------------*/ +/* + * USBSS-DEV DMA interface. + */ +#define TRBS_PER_SEGMENT 40 + +#define ISO_MAX_INTERVAL 10 + +#if TRBS_PER_SEGMENT < 2 +#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2." +#endif + +/* + *Only for ISOC endpoints - maximum number of TRBs is calculated as + * pow(2, bInterval-1) * number of usb requests. It is limitation made by + * driver to save memory. Controller must prepare TRB for each ITP even + * if bInterval > 1. It's the reason why driver needs so many TRBs for + * isochronous endpoints. + */ +#define TRBS_PER_ISOC_SEGMENT (ISO_MAX_INTERVAL * 8) + +#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \ + TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT) +/** + * struct cdns3_trb - represent Transfer Descriptor block. + * @buffer: pointer to buffer data + * @length: length of data + * @control: control flags. + * + * This structure describes transfer block serviced by DMA module. + */ +struct cdns3_trb { + __le32 buffer; + __le32 length; + __le32 control; +}; + +#define TRB_SIZE (sizeof(struct cdns3_trb)) +#define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT) +#define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT) +#define TRB_CTRL_RING_SIZE (TRB_SIZE * 2) + +/* TRB bit mask */ +#define TRB_TYPE_BITMASK GENMASK(15, 10) +#define TRB_TYPE(p) ((p) << 10) +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) + +/* TRB type IDs */ +/* bulk, interrupt, isoc , and control data stage */ +#define TRB_NORMAL 1 +/* TRB for linking ring segments */ +#define TRB_LINK 6 + +/* Cycle bit - indicates TRB ownership by driver or hw*/ +#define TRB_CYCLE BIT(0) +/* + * When set to '1', the device will toggle its interpretation of the Cycle bit + */ +#define TRB_TOGGLE BIT(1) + +/* + * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was + * processed while USB short packet was received. No more buffers defined by + * the TD will be used. DMA will automatically advance to next TD. + * - Shall be set to 0 by Software when putting TRB on the Transfer Ring + * - Shall be set to 1 by Controller when Short Packet condition for this TRB + * is detected independent if ISP is set or not. + */ +#define TRB_SP BIT(1) + +/* Interrupt on short packet*/ +#define TRB_ISP BIT(2) +/*Setting this bit enables FIFO DMA operation mode*/ +#define TRB_FIFO_MODE BIT(3) +/* Set PCIe no snoop attribute */ +#define TRB_CHAIN BIT(4) +/* Interrupt on completion */ +#define TRB_IOC BIT(5) + +/* stream ID bitmasks. */ +#define TRB_STREAM_ID(p) ((p) & GENMASK(31, 16)) + +/* Size of TD expressed in USB packets for HS/FS mode. */ +#define TRB_TDL_HS_SIZE(p) (((p) << 16) & GENMASK(31, 16)) +#define TRB_TDL_HS_SIZE_GET(p) (((p) & GENMASK(31, 16)) >> 16) + +/* transfer_len bitmasks. */ +#define TRB_LEN(p) ((p) & GENMASK(16, 0)) + +/* Size of TD expressed in USB packets for SS mode. */ +#define TRB_TDL_SS_SIZE(p) (((p) << 17) & GENMASK(23, 17)) +#define TRB_TDL_SS_SIZE_GET(p) (((p) & GENMASK(23, 17)) >> 17) + +/* transfer_len bitmasks - bits 31:24 */ +#define TRB_BURST_LEN(p) (((p) << 24) & GENMASK(31, 24)) +#define TRB_BURST_LEN_GET(p) (((p) & GENMASK(31, 24)) >> 24) + +/* Data buffer pointer bitmasks*/ +#define TRB_BUFFER(p) ((p) & GENMASK(31, 0)) + +/*-------------------------------------------------------------------------*/ +/* Driver numeric constants */ + +/* Such declaration should be added to ch9.h */ +#define USB_DEVICE_MAX_ADDRESS 127 + +/* Endpoint init values */ +#define CDNS3_EP_MAX_PACKET_LIMIT 1024 +#define CDNS3_EP_MAX_STREAMS 15 +#define CDNS3_EP0_MAX_PACKET_LIMIT 512 + +/* All endpoints including EP0 */ +#define CDNS3_ENDPOINTS_MAX_COUNT 32 +#define CDNS3_EP_ZLP_BUF_SIZE 1024 + +#define CDNS3_EP_BUF_SIZE 2 /* KB */ +#define CDNS3_EP_ISO_HS_MULT 3 +#define CDNS3_EP_ISO_SS_BURST 3 +#define CDNS3_MAX_NUM_DESCMISS_BUF 32 +#define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ +#define CDNS3_WA2_NUM_BUFFERS 128 +/*-------------------------------------------------------------------------*/ +/* Used structs */ + +struct cdns3_device; + +/** + * struct cdns3_endpoint - extended device side representation of USB endpoint. + * @endpoint: usb endpoint + * @pending_req_list: list of requests queuing on transfer ring. + * @deferred_req_list: list of requests waiting for queuing on transfer ring. + * @wa2_descmiss_req_list: list of requests internally allocated by driver. + * @trb_pool: transfer ring - array of transaction buffers + * @trb_pool_dma: dma address of transfer ring + * @cdns3_dev: device associated with this endpoint + * @name: a human readable name e.g. ep1out + * @flags: specify the current state of endpoint + * @descmis_req: internal transfer object used for getting data from on-chip + * buffer. It can happen only if function driver doesn't send usb_request + * object on time. + * @dir: endpoint direction + * @num: endpoint number (1 - 15) + * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK + * @interval: interval between packets used for ISOC endpoint. + * @free_trbs: number of free TRBs in transfer ring + * @num_trbs: number of all TRBs in transfer ring + * @pcs: producer cycle state + * @ccs: consumer cycle state + * @enqueue: enqueue index in transfer ring + * @dequeue: dequeue index in transfer ring + * @trb_burst_size: number of burst used in trb. + */ +struct cdns3_endpoint { + struct usb_ep endpoint; + struct list_head pending_req_list; + struct list_head deferred_req_list; + struct list_head wa2_descmiss_req_list; + int wa2_counter; + + struct cdns3_trb *trb_pool; + dma_addr_t trb_pool_dma; + + struct cdns3_device *cdns3_dev; + char name[20]; + +#define EP_ENABLED BIT(0) +#define EP_STALL BIT(1) +#define EP_WEDGE BIT(2) +#define EP_TRANSFER_STARTED BIT(3) +#define EP_UPDATE_EP_TRBADDR BIT(4) +#define EP_PENDING_REQUEST BIT(5) +#define EP_RING_FULL BIT(6) +#define EP_CLAIMED BIT(7) +#define EP_DEFERRED_DRDY BIT(8) +#define EP_QUIRK_ISO_OUT_EN BIT(9) +#define EP_QUIRK_EXTRA_BUF_DET BIT(10) +#define EP_QUIRK_EXTRA_BUF_EN BIT(11) +#define EP_QUIRK_END_TRANSFER BIT(12) + u32 flags; + + struct cdns3_request *descmis_req; + + u8 dir; + u8 num; + u8 type; + int interval; + + int free_trbs; + int num_trbs; + u8 pcs; + u8 ccs; + int enqueue; + int dequeue; + u8 trb_burst_size; + + unsigned int wa1_set:1; + struct cdns3_trb *wa1_trb; + unsigned int wa1_trb_index; + unsigned int wa1_cycle_bit:1; +}; + +/** + * struct cdns3_aligned_buf - represent aligned buffer used for DMA transfer + * @buf: aligned to 8 bytes data buffer. Buffer address used in + * TRB shall be aligned to 8. + * @dma: dma address + * @size: size of buffer + * @in_use: inform if this buffer is associated with usb_request + * @list: used to adding instance of this object to list + */ +struct cdns3_aligned_buf { + void *buf; + dma_addr_t dma; + u32 size; + int in_use:1; + struct list_head list; +}; + +/** + * struct cdns3_request - extended device side representation of usb_request + * object . + * @request: generic usb_request object describing single I/O request. + * @priv_ep: extended representation of usb_ep object + * @trb: the first TRB association with this request + * @start_trb: number of the first TRB in transfer ring + * @end_trb: number of the last TRB in transfer ring + * @aligned_buf: object holds information about aligned buffer associated whit + * this endpoint + * @flags: flag specifying special usage of request + * @list: used by internally allocated request to add to wa2_descmiss_req_list. + */ +struct cdns3_request { + struct usb_request request; + struct cdns3_endpoint *priv_ep; + struct cdns3_trb *trb; + int start_trb; + int end_trb; + struct cdns3_aligned_buf *aligned_buf; +#define REQUEST_PENDING BIT(0) +#define REQUEST_INTERNAL BIT(1) +#define REQUEST_INTERNAL_CH BIT(2) +#define REQUEST_ZLP BIT(3) +#define REQUEST_UNALIGNED BIT(4) + u32 flags; + struct list_head list; +}; + +#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request)) + +/*Stages used during enumeration process.*/ +#define CDNS3_SETUP_STAGE 0x0 +#define CDNS3_DATA_STAGE 0x1 +#define CDNS3_STATUS_STAGE 0x2 + +/** + * struct cdns3_device - represent USB device. + * @dev: pointer to device structure associated whit this controller + * @sysdev: pointer to the DMA capable device + * @gadget: device side representation of the peripheral controller + * @gadget_driver: pointer to the gadget driver + * @dev_ver: device controller version. + * @lock: for synchronizing + * @regs: base address for device side registers + * @setup_buf: used while processing usb control requests + * @setup_dma: dma address for setup_buf + * @zlp_buf - zlp buffer + * @ep0_stage: ep0 stage during enumeration process. + * @ep0_data_dir: direction for control transfer + * @eps: array of pointers to all endpoints with exclusion ep0 + * @aligned_buf_list: list of aligned buffers internally allocated by driver + * @run_garbage_colector: infroms that at least one element of aligned_buf_list + * can be freed + * @selected_ep: actually selected endpoint. It's used only to improve + * performance. + * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP. + * @u1_allowed: allow device transition to u1 state + * @u2_allowed: allow device transition to u2 state + * @is_selfpowered: device is self powered + * @setup_pending: setup packet is processing by gadget driver + * @hw_configured_flag: hardware endpoint configuration was set. + * @wake_up_flag: allow device to remote up the host + * @status_completion_no_call: indicate that driver is waiting for status s + * stage completion. It's used in deferred SET_CONFIGURATION request. + * @onchip_buffers: number of available on-chip buffers. + * @onchip_used_size: actual size of on-chip memory assigned to endpoints. + * @pending_status_wq: workqueue handling status stage for deferred requests. + * @shadow_ep_en: hold information about endpoints that will be enabled + * in soft irq. + * @pending_status_request: request for which status stage was deferred + */ +struct cdns3_device { + struct device *dev; + struct device *sysdev; + + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + +#define CDNS_REVISION_V0 0x00024501 +#define CDNS_REVISION_V1 0x00024509 + u32 dev_ver; + + /* generic spin-lock for drivers */ + spinlock_t lock; + + struct cdns3_usb_regs __iomem *regs; + + struct usb_ctrlrequest *setup_buf; + dma_addr_t setup_dma; + void *zlp_buf; + + u8 ep0_stage; + int ep0_data_dir; + + struct cdns3_endpoint *eps[CDNS3_ENDPOINTS_MAX_COUNT]; + + struct list_head aligned_buf_list; + unsigned run_garbage_colector:1; + + u32 selected_ep; + u16 isoch_delay; + + unsigned wait_for_setup:1; + unsigned u1_allowed:1; + unsigned u2_allowed:1; + unsigned is_selfpowered:1; + unsigned setup_pending:1; + int hw_configured_flag:1; + int wake_up_flag:1; + unsigned status_completion_no_call:1; + int out_mem_is_allocated; + + struct work_struct pending_status_wq; + struct usb_request *pending_status_request; + u32 shadow_ep_en; + /*in KB */ + u16 onchip_buffers; + u16 onchip_used_size; +}; + +void cdns3_set_register_bit(void __iomem *ptr, u32 mask); +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb); +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev); +void cdns3_pending_setup_status_handler(struct work_struct *work); +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev); +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev); +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep); +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable); +struct usb_request *cdns3_next_request(struct list_head *list); +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); +void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm); +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep); +u8 cdns3_ep_addr_to_index(u8 ep_addr); +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep); +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value); +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags); +void cdns3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request); +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request); +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req, + int status); + +int cdns3_init_ep0(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep); +void cdns3_ep0_config(struct cdns3_device *priv_dev); +void cdns3_ep_config(struct cdns3_endpoint *priv_ep); +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir); +int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev); + +#endif /* __LINUX_CDNS3_GADGET */ diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h new file mode 100644 index 000000000000..b498a170b7e8 --- /dev/null +++ b/drivers/usb/cdns3/host-export.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver - Host Export APIs + * + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_HOST_EXPORT +#define __LINUX_CDNS3_HOST_EXPORT + +#ifdef CONFIG_USB_CDNS3_HOST + +int cdns3_host_init(struct cdns3 *cdns); +void cdns3_host_exit(struct cdns3 *cdns); + +#else + +static inline int cdns3_host_init(struct cdns3 *cdns) +{ + return -ENXIO; +} + +static inline void cdns3_host_exit(struct cdns3 *cdns) { } + +#endif /* CONFIG_USB_CDNS3_HOST */ + +#endif /* __LINUX_CDNS3_HOST_EXPORT */ diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c new file mode 100644 index 000000000000..df41ba7c6726 --- /dev/null +++ b/drivers/usb/cdns3/host.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - host side + * + * Copyright (C) 2018 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + */ + +#include <linux/platform_device.h> +#include "core.h" +#include "drd.h" + +static int __cdns3_host_init(struct cdns3 *cdns) +{ + struct platform_device *xhci; + int ret; + + cdns3_drd_switch_host(cdns, 1); + + xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); + if (!xhci) { + dev_err(cdns->dev, "couldn't allocate xHCI device\n"); + return -ENOMEM; + } + + xhci->dev.parent = cdns->dev; + cdns->host_dev = xhci; + + ret = platform_device_add_resources(xhci, cdns->xhci_res, + CDNS3_XHCI_RESOURCES_NUM); + if (ret) { + dev_err(cdns->dev, "couldn't add resources to xHCI device\n"); + goto err1; + } + + ret = platform_device_add(xhci); + if (ret) { + dev_err(cdns->dev, "failed to register xHCI device\n"); + goto err1; + } + + return 0; +err1: + platform_device_put(xhci); + return ret; +} + +static void cdns3_host_exit(struct cdns3 *cdns) +{ + platform_device_unregister(cdns->host_dev); + cdns->host_dev = NULL; + cdns3_drd_switch_host(cdns, 0); +} + +int cdns3_host_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = __cdns3_host_init; + rdrv->stop = cdns3_host_exit; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->suspend = NULL; + rdrv->resume = NULL; + rdrv->name = "host"; + + cdns->roles[CDNS3_ROLE_HOST] = rdrv; + + return 0; +} diff --git a/drivers/usb/cdns3/trace.c b/drivers/usb/cdns3/trace.c new file mode 100644 index 000000000000..9431eb86d4ff --- /dev/null +++ b/drivers/usb/cdns3/trace.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USBSS device controller driver Trace Support + * + * Copyright (C) 2018 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#define CREATE_TRACE_POINTS +#include "trace.h" + +void cdns3_dbg(struct cdns3_device *priv_dev, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + vaf.fmt = fmt; + vaf.va = &args; + trace_cdns3_log(priv_dev, &vaf); + va_end(args); +} diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h new file mode 100644 index 000000000000..1cc2abca320c --- /dev/null +++ b/drivers/usb/cdns3/trace.h @@ -0,0 +1,447 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * USBSS device controller driver. + * Trace support header file. + * + * Copyright (C) 2018 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM cdns3 + +#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ) +#define __LINUX_CDNS3_TRACE + +#include <linux/types.h> +#include <linux/tracepoint.h> +#include <asm/byteorder.h> +#include <linux/usb/ch9.h> +#include "core.h" +#include "gadget.h" +#include "debug.h" + +#define CDNS3_MSG_MAX 500 + +TRACE_EVENT(cdns3_log, + TP_PROTO(struct cdns3_device *priv_dev, struct va_format *vaf), + TP_ARGS(priv_dev, vaf), + TP_STRUCT__entry( + __string(name, dev_name(priv_dev->dev)) + __dynamic_array(char, msg, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __assign_str(name, dev_name(priv_dev->dev)); + vsnprintf(__get_str(msg), CDNS3_MSG_MAX, vaf->fmt, *vaf->va); + ), + TP_printk("%s: %s", __get_str(name), __get_str(msg)) +); + +DECLARE_EVENT_CLASS(cdns3_log_doorbell, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr), + TP_STRUCT__entry( + __string(name, ep_name) + __field(u32, ep_trbaddr) + ), + TP_fast_assign( + __assign_str(name, ep_name); + __entry->ep_trbaddr = ep_trbaddr; + ), + TP_printk("//Ding Dong %s, ep_trbaddr %08x", __get_str(name), + __entry->ep_trbaddr) +); + +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr) +); + +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr) +); + +DECLARE_EVENT_CLASS(cdns3_log_usb_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists), + TP_ARGS(priv_dev, usb_ists), + TP_STRUCT__entry( + __field(enum usb_device_speed, speed) + __field(u32, usb_ists) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->speed = cdns3_get_speed(priv_dev); + __entry->usb_ists = usb_ists; + ), + TP_printk("%s", cdns3_decode_usb_irq(__get_str(str), __entry->speed, + __entry->usb_ists)) +); + +DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists), + TP_ARGS(priv_dev, usb_ists) +); + +DECLARE_EVENT_CLASS(cdns3_log_epx_irq, + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_dev, priv_ep), + TP_STRUCT__entry( + __string(ep_name, priv_ep->name) + __field(u32, ep_sts) + __field(u32, ep_traddr) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __assign_str(ep_name, priv_ep->name); + __entry->ep_sts = readl(&priv_dev->regs->ep_sts); + __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr); + ), + TP_printk("%s, ep_traddr: %08x", + cdns3_decode_epx_irq(__get_str(str), + __get_str(ep_name), + __entry->ep_sts), + __entry->ep_traddr) +); + +DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq, + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_dev, priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_ep0_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts), + TP_ARGS(priv_dev, ep_sts), + TP_STRUCT__entry( + __field(int, ep_dir) + __field(u32, ep_sts) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->ep_dir = priv_dev->ep0_data_dir; + __entry->ep_sts = ep_sts; + ), + TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str), + __entry->ep_dir, + __entry->ep_sts)) +); + +DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts), + TP_ARGS(priv_dev, ep_sts) +); + +DECLARE_EVENT_CLASS(cdns3_log_ctrl, + TP_PROTO(struct usb_ctrlrequest *ctrl), + TP_ARGS(ctrl), + TP_STRUCT__entry( + __field(u8, bRequestType) + __field(u8, bRequest) + __field(u16, wValue) + __field(u16, wIndex) + __field(u16, wLength) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->bRequestType = ctrl->bRequestType; + __entry->bRequest = ctrl->bRequest; + __entry->wValue = le16_to_cpu(ctrl->wValue); + __entry->wIndex = le16_to_cpu(ctrl->wIndex); + __entry->wLength = le16_to_cpu(ctrl->wLength); + ), + TP_printk("%s", usb_decode_ctrl(__get_str(str), CDNS3_MSG_MAX, + __entry->bRequestType, + __entry->bRequest, __entry->wValue, + __entry->wIndex, __entry->wLength) + ) +); + +DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req, + TP_PROTO(struct usb_ctrlrequest *ctrl), + TP_ARGS(ctrl) +); + +DECLARE_EVENT_CLASS(cdns3_log_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req), + TP_STRUCT__entry( + __string(name, req->priv_ep->name) + __field(struct cdns3_request *, req) + __field(void *, buf) + __field(unsigned int, actual) + __field(unsigned int, length) + __field(int, status) + __field(int, zero) + __field(int, short_not_ok) + __field(int, no_interrupt) + __field(int, start_trb) + __field(int, end_trb) + __field(struct cdns3_trb *, start_trb_addr) + __field(int, flags) + ), + TP_fast_assign( + __assign_str(name, req->priv_ep->name); + __entry->req = req; + __entry->buf = req->request.buf; + __entry->actual = req->request.actual; + __entry->length = req->request.length; + __entry->status = req->request.status; + __entry->zero = req->request.zero; + __entry->short_not_ok = req->request.short_not_ok; + __entry->no_interrupt = req->request.no_interrupt; + __entry->start_trb = req->start_trb; + __entry->end_trb = req->end_trb; + __entry->start_trb_addr = req->trb; + __entry->flags = req->flags; + ), + TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d," + " trb: [start:%d, end:%d: virt addr %pa], flags:%x ", + __get_str(name), __entry->req, __entry->buf, __entry->actual, + __entry->length, + __entry->zero ? "zero | " : "", + __entry->short_not_ok ? "short | " : "", + __entry->no_interrupt ? "no int" : "", + __entry->status, + __entry->start_trb, + __entry->end_trb, + __entry->start_trb_addr, + __entry->flags + ) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_free_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DECLARE_EVENT_CLASS(cdns3_log_aligned_request, + TP_PROTO(struct cdns3_request *priv_req), + TP_ARGS(priv_req), + TP_STRUCT__entry( + __string(name, priv_req->priv_ep->name) + __field(struct usb_request *, req) + __field(void *, buf) + __field(dma_addr_t, dma) + __field(void *, aligned_buf) + __field(dma_addr_t, aligned_dma) + __field(u32, aligned_buf_size) + ), + TP_fast_assign( + __assign_str(name, priv_req->priv_ep->name); + __entry->req = &priv_req->request; + __entry->buf = priv_req->request.buf; + __entry->dma = priv_req->request.dma; + __entry->aligned_buf = priv_req->aligned_buf->buf; + __entry->aligned_dma = priv_req->aligned_buf->dma; + __entry->aligned_buf_size = priv_req->aligned_buf->size; + ), + TP_printk("%s: req: %p, req buf %p, dma %pad a_buf %p a_dma %pad, size %d", + __get_str(name), __entry->req, __entry->buf, &__entry->dma, + __entry->aligned_buf, &__entry->aligned_dma, + __entry->aligned_buf_size + ) +); + +DEFINE_EVENT(cdns3_log_aligned_request, cdns3_free_aligned_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DECLARE_EVENT_CLASS(cdns3_log_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb), + TP_STRUCT__entry( + __string(name, priv_ep->name) + __field(struct cdns3_trb *, trb) + __field(u32, buffer) + __field(u32, length) + __field(u32, control) + __field(u32, type) + ), + TP_fast_assign( + __assign_str(name, priv_ep->name); + __entry->trb = trb; + __entry->buffer = trb->buffer; + __entry->length = trb->length; + __entry->control = trb->control; + __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); + ), + TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)", + __get_str(name), __entry->trb, __entry->buffer, + TRB_LEN(__entry->length), + (u8)TRB_BURST_LEN_GET(__entry->length), + __entry->control, + __entry->control & TRB_CYCLE ? "C=1, " : "C=0, ", + __entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ", + __entry->control & TRB_ISP ? "ISP, " : "", + __entry->control & TRB_FIFO_MODE ? "FIFO, " : "", + __entry->control & TRB_CHAIN ? "CHAIN, " : "", + __entry->control & TRB_IOC ? "IOC, " : "", + TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK" + ) +); + +DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb) +); + +DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb) +); + +DECLARE_EVENT_CLASS(cdns3_log_ring, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep), + TP_STRUCT__entry( + __dynamic_array(u8, ring, TRB_RING_SIZE) + __dynamic_array(u8, priv_ep, sizeof(struct cdns3_endpoint)) + __dynamic_array(char, buffer, + (TRBS_PER_SEGMENT * 65) + CDNS3_MSG_MAX) + ), + TP_fast_assign( + memcpy(__get_dynamic_array(priv_ep), priv_ep, + sizeof(struct cdns3_endpoint)); + memcpy(__get_dynamic_array(ring), priv_ep->trb_pool, + TRB_RING_SIZE); + ), + + TP_printk("%s", + cdns3_dbg_ring((struct cdns3_endpoint *)__get_str(priv_ep), + (struct cdns3_trb *)__get_str(ring), + __get_str(buffer))) +); + +DEFINE_EVENT(cdns3_log_ring, cdns3_ring, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_ep, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep), + TP_STRUCT__entry( + __string(name, priv_ep->name) + __field(unsigned int, maxpacket) + __field(unsigned int, maxpacket_limit) + __field(unsigned int, max_streams) + __field(unsigned int, maxburst) + __field(unsigned int, flags) + __field(unsigned int, dir) + __field(u8, enqueue) + __field(u8, dequeue) + ), + TP_fast_assign( + __assign_str(name, priv_ep->name); + __entry->maxpacket = priv_ep->endpoint.maxpacket; + __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit; + __entry->max_streams = priv_ep->endpoint.max_streams; + __entry->maxburst = priv_ep->endpoint.maxburst; + __entry->flags = priv_ep->flags; + __entry->dir = priv_ep->dir; + __entry->enqueue = priv_ep->enqueue; + __entry->dequeue = priv_ep->dequeue; + ), + TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, " + "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", + __get_str(name), __entry->maxpacket, + __entry->maxpacket_limit, __entry->max_streams, + __entry->maxburst, __entry->enqueue, + __entry->dequeue, + __entry->flags & EP_ENABLED ? "EN | " : "", + __entry->flags & EP_STALL ? "STALL | " : "", + __entry->flags & EP_WEDGE ? "WEDGE | " : "", + __entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "", + __entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "", + __entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "", + __entry->flags & EP_RING_FULL ? "RING FULL |" : "", + __entry->flags & EP_CLAIMED ? "CLAIMED " : "", + __entry->dir ? "IN" : "OUT" + ) +); + +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_request_handled, + TP_PROTO(struct cdns3_request *priv_req, int current_index, + int handled), + TP_ARGS(priv_req, current_index, handled), + TP_STRUCT__entry( + __field(struct cdns3_request *, priv_req) + __field(unsigned int, dma_position) + __field(unsigned int, handled) + __field(unsigned int, dequeue_idx) + __field(unsigned int, enqueue_idx) + __field(unsigned int, start_trb) + __field(unsigned int, end_trb) + ), + TP_fast_assign( + __entry->priv_req = priv_req; + __entry->dma_position = current_index; + __entry->handled = handled; + __entry->dequeue_idx = priv_req->priv_ep->dequeue; + __entry->enqueue_idx = priv_req->priv_ep->enqueue; + __entry->start_trb = priv_req->start_trb; + __entry->end_trb = priv_req->end_trb; + ), + TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d," + " start trb: %d, end trb: %d", + __entry->priv_req, + __entry->handled ? "handled" : "not handled", + __entry->dma_position, __entry->dequeue_idx, + __entry->enqueue_idx, __entry->start_trb, + __entry->end_trb + ) +); + +DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled, + TP_PROTO(struct cdns3_request *priv_req, int current_index, + int handled), + TP_ARGS(priv_req, current_index, handled) +); +#endif /* __LINUX_CDNS3_TRACE */ + +/* this part must be outside header guard */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 8b499d643461..8e41d70fd298 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -531,7 +531,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) } /* Wait for AHB master IDLE state */ - if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) { + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) { dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n", __func__); return -EBUSY; diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 068259fdfb0c..9baabed87d61 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -246,258 +246,6 @@ static inline const char *dwc3_gadget_event_string(char *str, size_t size, return str; } -static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str, - size_t size) -{ - switch (t & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - snprintf(str, size, "Get Device Status(Length = %d)", l); - break; - case USB_RECIP_INTERFACE: - snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)", - i, l); - break; - case USB_RECIP_ENDPOINT: - snprintf(str, size, "Get Endpoint Status(ep%d%s)", - i & ~USB_DIR_IN, - i & USB_DIR_IN ? "in" : "out"); - break; - } -} - -static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v, - __u16 i, char *str, size_t size) -{ - switch (t & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - snprintf(str, size, "%s Device Feature(%s%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - ({char *s; - switch (v) { - case USB_DEVICE_SELF_POWERED: - s = "Self Powered"; - break; - case USB_DEVICE_REMOTE_WAKEUP: - s = "Remote Wakeup"; - break; - case USB_DEVICE_TEST_MODE: - s = "Test Mode"; - break; - case USB_DEVICE_U1_ENABLE: - s = "U1 Enable"; - break; - case USB_DEVICE_U2_ENABLE: - s = "U2 Enable"; - break; - case USB_DEVICE_LTM_ENABLE: - s = "LTM Enable"; - break; - default: - s = "UNKNOWN"; - } s; }), - v == USB_DEVICE_TEST_MODE ? - ({ char *s; - switch (i) { - case TEST_J: - s = ": TEST_J"; - break; - case TEST_K: - s = ": TEST_K"; - break; - case TEST_SE0_NAK: - s = ": TEST_SE0_NAK"; - break; - case TEST_PACKET: - s = ": TEST_PACKET"; - break; - case TEST_FORCE_EN: - s = ": TEST_FORCE_EN"; - break; - default: - s = ": UNKNOWN"; - } s; }) : ""); - break; - case USB_RECIP_INTERFACE: - snprintf(str, size, "%s Interface Feature(%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - v == USB_INTRF_FUNC_SUSPEND ? - "Function Suspend" : "UNKNOWN"); - break; - case USB_RECIP_ENDPOINT: - snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN", - i & ~USB_DIR_IN, - i & USB_DIR_IN ? "in" : "out"); - break; - } -} - -static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size) -{ - snprintf(str, size, "Set Address(Addr = %02x)", v); -} - -static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v, - __u16 i, __u16 l, char *str, size_t size) -{ - snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)", - b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set", - ({ char *s; - switch (v >> 8) { - case USB_DT_DEVICE: - s = "Device"; - break; - case USB_DT_CONFIG: - s = "Configuration"; - break; - case USB_DT_STRING: - s = "String"; - break; - case USB_DT_INTERFACE: - s = "Interface"; - break; - case USB_DT_ENDPOINT: - s = "Endpoint"; - break; - case USB_DT_DEVICE_QUALIFIER: - s = "Device Qualifier"; - break; - case USB_DT_OTHER_SPEED_CONFIG: - s = "Other Speed Config"; - break; - case USB_DT_INTERFACE_POWER: - s = "Interface Power"; - break; - case USB_DT_OTG: - s = "OTG"; - break; - case USB_DT_DEBUG: - s = "Debug"; - break; - case USB_DT_INTERFACE_ASSOCIATION: - s = "Interface Association"; - break; - case USB_DT_BOS: - s = "BOS"; - break; - case USB_DT_DEVICE_CAPABILITY: - s = "Device Capability"; - break; - case USB_DT_PIPE_USAGE: - s = "Pipe Usage"; - break; - case USB_DT_SS_ENDPOINT_COMP: - s = "SS Endpoint Companion"; - break; - case USB_DT_SSP_ISOC_ENDPOINT_COMP: - s = "SSP Isochronous Endpoint Companion"; - break; - default: - s = "UNKNOWN"; - break; - } s; }), v & 0xff, l); -} - - -static inline void dwc3_decode_get_configuration(__u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Get Configuration(Length = %d)", l); -} - -static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size) -{ - snprintf(str, size, "Set Configuration(Config = %d)", v); -} - -static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l); -} - -static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size) -{ - snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v); -} - -static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l); -} - -static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size) -{ - snprintf(str, size, "Set SEL(Length = %d)", l); -} - -static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size) -{ - snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v); -} - -/** - * dwc3_decode_ctrl - returns a string represetion of ctrl request - */ -static inline const char *dwc3_decode_ctrl(char *str, size_t size, - __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex, - __u16 wLength) -{ - switch (bRequest) { - case USB_REQ_GET_STATUS: - dwc3_decode_get_status(bRequestType, wIndex, wLength, str, - size); - break; - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue, - wIndex, str, size); - break; - case USB_REQ_SET_ADDRESS: - dwc3_decode_set_address(wValue, str, size); - break; - case USB_REQ_GET_DESCRIPTOR: - case USB_REQ_SET_DESCRIPTOR: - dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue, - wIndex, wLength, str, size); - break; - case USB_REQ_GET_CONFIGURATION: - dwc3_decode_get_configuration(wLength, str, size); - break; - case USB_REQ_SET_CONFIGURATION: - dwc3_decode_set_configuration(wValue, str, size); - break; - case USB_REQ_GET_INTERFACE: - dwc3_decode_get_intf(wIndex, wLength, str, size); - break; - case USB_REQ_SET_INTERFACE: - dwc3_decode_set_intf(wValue, wIndex, str, size); - break; - case USB_REQ_SYNCH_FRAME: - dwc3_decode_synch_frame(wIndex, wLength, str, size); - break; - case USB_REQ_SET_SEL: - dwc3_decode_set_sel(wLength, str, size); - break; - case USB_REQ_SET_ISOCH_DELAY: - dwc3_decode_set_isoch_delay(wValue, str, size); - break; - default: - snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", - bRequestType, bRequest, - cpu_to_le16(wValue) & 0xff, - cpu_to_le16(wValue) >> 8, - cpu_to_le16(wIndex) & 0xff, - cpu_to_le16(wIndex) >> 8, - cpu_to_le16(wLength) & 0xff, - cpu_to_le16(wLength) >> 8); - } - - return str; -} - /** * dwc3_ep_event_string - returns event name * @event: then event code diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index f9b550081550..5e8e18222f92 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -35,6 +35,7 @@ #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -343,6 +344,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 818a63da1a44..9edff17111f7 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -86,7 +86,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl, __entry->wIndex = le16_to_cpu(ctrl->wIndex); __entry->wLength = le16_to_cpu(ctrl->wLength); ), - TP_printk("%s", dwc3_decode_ctrl(__get_str(str), DWC3_MSG_MAX, + TP_printk("%s", usb_decode_ctrl(__get_str(str), DWC3_MSG_MAX, __entry->bRequestType, __entry->bRequest, __entry->wValue, __entry->wIndex, __entry->wLength) diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 130dad7130b6..500a5a592abe 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -9,5 +9,6 @@ ccflags-y += -I$(srctree)/drivers/usb/gadget/udc obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o libcomposite-y := usbstring.o config.o epautoconf.o libcomposite-y += composite.o functions.o configfs.o u_f.o +libcomposite-y += debug.o obj-$(CONFIG_USB_GADGET) += udc/ function/ legacy/ diff --git a/drivers/usb/gadget/debug.c b/drivers/usb/gadget/debug.c new file mode 100644 index 000000000000..92a986aeaa5d --- /dev/null +++ b/drivers/usb/gadget/debug.c @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Common USB debugging functions + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + */ + +#include <linux/usb/ch9.h> + +static void usb_decode_get_status(__u8 bRequestType, __u16 wIndex, + __u16 wLength, char *str, size_t size) +{ + switch (bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + snprintf(str, size, "Get Device Status(Length = %d)", wLength); + break; + case USB_RECIP_INTERFACE: + snprintf(str, size, + "Get Interface Status(Intf = %d, Length = %d)", + wIndex, wLength); + break; + case USB_RECIP_ENDPOINT: + snprintf(str, size, "Get Endpoint Status(ep%d%s)", + wIndex & ~USB_DIR_IN, + wIndex & USB_DIR_IN ? "in" : "out"); + break; + } +} + +static const char *usb_decode_device_feature(u16 wValue) +{ + switch (wValue) { + case USB_DEVICE_SELF_POWERED: + return "Self Powered"; + case USB_DEVICE_REMOTE_WAKEUP: + return "Remote Wakeup"; + case USB_DEVICE_TEST_MODE: + return "Test Mode"; + case USB_DEVICE_U1_ENABLE: + return "U1 Enable"; + case USB_DEVICE_U2_ENABLE: + return "U2 Enable"; + case USB_DEVICE_LTM_ENABLE: + return "LTM Enable"; + default: + return "UNKNOWN"; + } +} + +static const char *usb_decode_test_mode(u16 wIndex) +{ + switch (wIndex) { + case TEST_J: + return ": TEST_J"; + case TEST_K: + return ": TEST_K"; + case TEST_SE0_NAK: + return ": TEST_SE0_NAK"; + case TEST_PACKET: + return ": TEST_PACKET"; + case TEST_FORCE_EN: + return ": TEST_FORCE_EN"; + default: + return ": UNKNOWN"; + } +} + +static void usb_decode_set_clear_feature(__u8 bRequestType, + __u8 bRequest, __u16 wValue, + __u16 wIndex, char *str, size_t size) +{ + switch (bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + snprintf(str, size, "%s Device Feature(%s%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + usb_decode_device_feature(wValue), + wValue == USB_DEVICE_TEST_MODE ? + usb_decode_test_mode(wIndex) : ""); + break; + case USB_RECIP_INTERFACE: + snprintf(str, size, "%s Interface Feature(%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + wValue == USB_INTRF_FUNC_SUSPEND ? + "Function Suspend" : "UNKNOWN"); + break; + case USB_RECIP_ENDPOINT: + snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + wValue == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN", + wIndex & ~USB_DIR_IN, + wIndex & USB_DIR_IN ? "in" : "out"); + break; + } +} + +static void usb_decode_set_address(__u16 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Address(Addr = %02x)", wValue); +} + +static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest, + __u16 wValue, __u16 wIndex, + __u16 wLength, char *str, size_t size) +{ + char *s; + + switch (wValue >> 8) { + case USB_DT_DEVICE: + s = "Device"; + break; + case USB_DT_CONFIG: + s = "Configuration"; + break; + case USB_DT_STRING: + s = "String"; + break; + case USB_DT_INTERFACE: + s = "Interface"; + break; + case USB_DT_ENDPOINT: + s = "Endpoint"; + break; + case USB_DT_DEVICE_QUALIFIER: + s = "Device Qualifier"; + break; + case USB_DT_OTHER_SPEED_CONFIG: + s = "Other Speed Config"; + break; + case USB_DT_INTERFACE_POWER: + s = "Interface Power"; + break; + case USB_DT_OTG: + s = "OTG"; + break; + case USB_DT_DEBUG: + s = "Debug"; + break; + case USB_DT_INTERFACE_ASSOCIATION: + s = "Interface Association"; + break; + case USB_DT_BOS: + s = "BOS"; + break; + case USB_DT_DEVICE_CAPABILITY: + s = "Device Capability"; + break; + case USB_DT_PIPE_USAGE: + s = "Pipe Usage"; + break; + case USB_DT_SS_ENDPOINT_COMP: + s = "SS Endpoint Companion"; + break; + case USB_DT_SSP_ISOC_ENDPOINT_COMP: + s = "SSP Isochronous Endpoint Companion"; + break; + default: + s = "UNKNOWN"; + break; + } + + snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)", + bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set", + s, wValue & 0xff, wLength); +} + +static void usb_decode_get_configuration(__u16 wLength, char *str, size_t size) +{ + snprintf(str, size, "Get Configuration(Length = %d)", wLength); +} + +static void usb_decode_set_configuration(__u8 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Configuration(Config = %d)", wValue); +} + +static void usb_decode_get_intf(__u16 wIndex, __u16 wLength, char *str, + size_t size) +{ + snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", + wIndex, wLength); +} + +static void usb_decode_set_intf(__u8 wValue, __u16 wIndex, char *str, + size_t size) +{ + snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", + wIndex, wValue); +} + +static void usb_decode_synch_frame(__u16 wIndex, __u16 wLength, + char *str, size_t size) +{ + snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", + wIndex, wLength); +} + +static void usb_decode_set_sel(__u16 wLength, char *str, size_t size) +{ + snprintf(str, size, "Set SEL(Length = %d)", wLength); +} + +static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue); +} + +/** + * usb_decode_ctrl - returns a string representation of ctrl request + */ +const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + switch (bRequest) { + case USB_REQ_GET_STATUS: + usb_decode_get_status(bRequestType, wIndex, wLength, str, size); + break; + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + usb_decode_set_clear_feature(bRequestType, bRequest, wValue, + wIndex, str, size); + break; + case USB_REQ_SET_ADDRESS: + usb_decode_set_address(wValue, str, size); + break; + case USB_REQ_GET_DESCRIPTOR: + case USB_REQ_SET_DESCRIPTOR: + usb_decode_get_set_descriptor(bRequestType, bRequest, wValue, + wIndex, wLength, str, size); + break; + case USB_REQ_GET_CONFIGURATION: + usb_decode_get_configuration(wLength, str, size); + break; + case USB_REQ_SET_CONFIGURATION: + usb_decode_set_configuration(wValue, str, size); + break; + case USB_REQ_GET_INTERFACE: + usb_decode_get_intf(wIndex, wLength, str, size); + break; + case USB_REQ_SET_INTERFACE: + usb_decode_set_intf(wValue, wIndex, str, size); + break; + case USB_REQ_SYNCH_FRAME: + usb_decode_synch_frame(wIndex, wLength, str, size); + break; + case USB_REQ_SET_SEL: + usb_decode_set_sel(wLength, str, size); + break; + case USB_REQ_SET_ISOCH_DELAY: + usb_decode_set_isoch_delay(wValue, str, size); + break; + default: + snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", + bRequestType, bRequest, + (u8)(cpu_to_le16(wValue) & 0xff), + (u8)(cpu_to_le16(wValue) >> 8), + (u8)(cpu_to_le16(wIndex) & 0xff), + (u8)(cpu_to_le16(wIndex) >> 8), + (u8)(cpu_to_le16(wLength) & 0xff), + (u8)(cpu_to_le16(wLength) >> 8)); + } + + return str; +} +EXPORT_SYMBOL_GPL(usb_decode_ctrl); diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index c13befa31110..b81a91d504bd 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -166,7 +166,6 @@ static struct usb_gadget_strings *eem_strings[] = { static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { struct usb_composite_dev *cdev = f->config->cdev; - int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); @@ -176,7 +175,7 @@ static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) w_value, w_index, w_length); /* device either stalls (value < 0) or reports success */ - return value; + return -EOPNOTSUPP; } diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 5a960fce31c5..87062d22134d 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1168,7 +1168,7 @@ static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep, static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep, struct renesas_usb3_request *usb3_req) { - int ret = -EAGAIN; + int ret; if (usb3_ep->dir_in) ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 6fa16ab31e2e..70b8c8248caf 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -17,9 +17,11 @@ #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/iopoll.h> #define DRIVER_NAME "mxs_phy" +/* Register Macro */ #define HW_USBPHY_PWD 0x00 #define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 @@ -37,6 +39,11 @@ #define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) #define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) +/* imx7ulp */ +#define HW_USBPHY_PLL_SIC 0xa0 +#define HW_USBPHY_PLL_SIC_SET 0xa4 +#define HW_USBPHY_PLL_SIC_CLR 0xa8 + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) @@ -55,6 +62,12 @@ #define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) #define BM_USBPHY_DEBUG_CLKGATE BIT(30) +/* imx7ulp */ +#define BM_USBPHY_PLL_LOCK BIT(31) +#define BM_USBPHY_PLL_REG_ENABLE BIT(21) +#define BM_USBPHY_PLL_BYPASS BIT(16) +#define BM_USBPHY_PLL_POWER BIT(12) +#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6) /* Anatop Registers */ #define ANADIG_ANA_MISC0 0x150 @@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; +static const struct mxs_phy_data imx7ulp_phy_data = { +}; + static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, @@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, + { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); @@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) return mxs_phy->data == &imx6sl_phy_data; } +static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx7ulp_phy_data; +} + /* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock. @@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) } } +static int mxs_phy_pll_enable(void __iomem *base, bool enable) +{ + int ret = 0; + + if (enable) { + u32 value; + + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET); + ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC, + value, (value & BM_USBPHY_PLL_LOCK) != 0, + 100, 10000); + if (ret) + return ret; + + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_SET); + } else { + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR); + } + + return ret; +} + static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; void __iomem *base = mxs_phy->phy.io_priv; + if (is_imx7ulp_phy(mxs_phy)) { + ret = mxs_phy_pll_enable(base, true); + if (ret) + return ret; + } + ret = stmp_reset_block(base + HW_USBPHY_CTRL); if (ret) - return ret; + goto disable_pll; /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); @@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) mxs_phy_tx_init(mxs_phy); return 0; + +disable_pll: + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(base, false); + return ret; } /* Return true if the vbus is there */ @@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy) writel(BM_USBPHY_CTRL_CLKGATE, phy->io_priv + HW_USBPHY_CTRL_SET); + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(phy->io_priv, false); + clk_disable_unprepare(mxs_phy->clk); } diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index a345b2ef976e..2a01ceb71641 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -804,9 +804,8 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) } static void usbhsf_dma_complete(void *arg); -static void xfer_work(struct work_struct *work) +static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) { - struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_fifo *fifo; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -814,12 +813,10 @@ static void xfer_work(struct work_struct *work) struct dma_chan *chan; struct device *dev = usbhs_priv_to_dev(priv); enum dma_transfer_direction dir; - unsigned long flags; - usbhs_lock(priv, flags); fifo = usbhs_pipe_to_fifo(pipe); if (!fifo) - goto xfer_work_end; + return; chan = usbhsf_dma_chan_get(fifo, pkt); dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; @@ -828,7 +825,7 @@ static void xfer_work(struct work_struct *work) pkt->trans, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) - goto xfer_work_end; + return; desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; @@ -836,7 +833,7 @@ static void xfer_work(struct work_struct *work) pkt->cookie = dmaengine_submit(desc); if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); - goto xfer_work_end; + return; } dev_dbg(dev, " %s %d (%d/ %d)\n", @@ -847,8 +844,17 @@ static void xfer_work(struct work_struct *work) dma_async_issue_pending(chan); usbhsf_dma_start(pipe, fifo); usbhs_pipe_enable(pipe); +} + +static void xfer_work(struct work_struct *work) +{ + struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + unsigned long flags; -xfer_work_end: + usbhs_lock(priv, flags); + usbhsf_dma_xfer_preparing(pkt); usbhs_unlock(priv, flags); } @@ -901,8 +907,13 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) pkt->trans = len; usbhsf_tx_irq_ctrl(pipe, 0); - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + /* FIXME: Workaound for usb dmac that driver can be used in atomic */ + if (usbhs_get_dparam(priv, has_usb_dmac)) { + usbhsf_dma_xfer_preparing(pkt); + } else { + INIT_WORK(&pkt->work, xfer_work); + schedule_work(&pkt->work); + } return 0; @@ -1008,8 +1019,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, pkt->trans = pkt->length; - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + usbhsf_dma_xfer_preparing(pkt); return 0; diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index fb19141151d8..42902fcc8696 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -889,4 +889,30 @@ extern void usb_ep_autoconfig_release(struct usb_ep *); extern void usb_ep_autoconfig_reset(struct usb_gadget *); +/*-------------------------------------------------------------------------*/ +/** + * usb_decode_ctrl - Returns human readable representation of control request. + * @str: buffer to return a human-readable representation of control request. + * This buffer should have about 200 bytes. + * @size: size of str buffer. + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (CPU byte order) + * @wIndex: matches the USB wIndex field (CPU byte order) + * @wLength: matches the USB wLength field (CPU byte order) + * + * Function returns decoded, formatted and human-readable description of + * control request packet. + * + * The usage scenario for this is for tracepoints, so function as a return + * use the same value as in parameters. This approach allows to use this + * function in TP_printk + * + * Important: wValue, wIndex, wLength parameters before invoking this function + * should be processed by le16_to_cpu macro. + */ +extern const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength); + #endif /* __LINUX_USB_GADGET_H */ |