diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 30 |
1 files changed, 26 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 0ecdb47a23ab..01f767ee4546 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -94,6 +94,12 @@ #define SB800_PIIX4_PORT_IDX_ALT 0x2e #define SB800_PIIX4_PORT_IDX_SEL 0x2f #define SB800_PIIX4_PORT_IDX_MASK 0x06 +#define SB800_PIIX4_PORT_IDX_SHIFT 1 + +/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ +#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 +#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 +#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 /* insmod parameters */ @@ -149,6 +155,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { */ static DEFINE_MUTEX(piix4_mutex_sb800); static u8 piix4_port_sel_sb800; +static u8 piix4_port_mask_sb800; +static u8 piix4_port_shift_sb800; static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { " port 0", " port 2", " port 3", " port 4" }; @@ -347,7 +355,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) { - piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; + switch (PIIX4_dev->device) { + case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS: + piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; + break; + case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS: + default: + piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; + break; + } } else { mutex_lock(&piix4_mutex_sb800); outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX); @@ -355,6 +375,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, piix4_port_sel_sb800 = (port_sel & 0x01) ? SB800_PIIX4_PORT_IDX_ALT : SB800_PIIX4_PORT_IDX; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; mutex_unlock(&piix4_mutex_sb800); } @@ -616,8 +638,8 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); port = adapdata->port; - if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port) - outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port, + if ((smba_en_lo & piix4_port_mask_sb800) != port) + outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port, SB800_PIIX4_SMB_IDX + 1); retval = piix4_access(adap, addr, flags, read_write, @@ -706,7 +728,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adapdata->smba = smba; adapdata->sb800_main = sb800_main; - adapdata->port = port << 1; + adapdata->port = port << piix4_port_shift_sb800; /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; |