diff options
-rw-r--r-- | include/linux/avf/virtchnl.h | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/include/linux/avf/virtchnl.h b/include/linux/avf/virtchnl.h index b30a1bc74fc7..2ce27e8e4f19 100644 --- a/include/linux/avf/virtchnl.h +++ b/include/linux/avf/virtchnl.h @@ -141,6 +141,13 @@ enum virtchnl_ops { VIRTCHNL_OP_DEL_RSS_CFG = 46, VIRTCHNL_OP_ADD_FDIR_FILTER = 47, VIRTCHNL_OP_DEL_FDIR_FILTER = 48, + VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51, + VIRTCHNL_OP_ADD_VLAN_V2 = 52, + VIRTCHNL_OP_DEL_VLAN_V2 = 53, + VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54, + VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55, + VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56, + VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57, VIRTCHNL_OP_MAX, }; @@ -246,6 +253,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource); #define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6) /* used to negotiate communicating link speeds in Mbps */ #define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7) +#define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15) #define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16) #define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17) #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18) @@ -475,6 +483,351 @@ struct virtchnl_vlan_filter_list { VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list); +/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related + * structures and opcodes. + * + * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver + * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED. + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype. + * + * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported + * by the PF concurrently. For example, if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it + * would OR the following bits: + * + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * The VF would interpret this as VLAN filtering can be supported on both 0x8100 + * and 0x88A8 VLAN ethertypes. + * + * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported + * by the PF concurrently. For example if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping + * offload it would OR the following bits: + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * The VF would interpret this as VLAN stripping can be supported on either + * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override + * the previously set value. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or + * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware + * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware + * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor. + * + * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for + * VLAN filtering if the underlying PF supports it. + * + * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a + * certain VLAN capability can be toggled. For example if the underlying PF/CP + * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should + * set this bit along with the supported ethertypes. + */ +enum virtchnl_vlan_support { + VIRTCHNL_VLAN_UNSUPPORTED = 0, + VIRTCHNL_VLAN_ETHERTYPE_8100 = BIT(0), + VIRTCHNL_VLAN_ETHERTYPE_88A8 = BIT(1), + VIRTCHNL_VLAN_ETHERTYPE_9100 = BIT(2), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = BIT(8), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = BIT(9), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = BIT(10), + VIRTCHNL_VLAN_PRIO = BIT(24), + VIRTCHNL_VLAN_FILTER_MASK = BIT(28), + VIRTCHNL_VLAN_ETHERTYPE_AND = BIT(29), + VIRTCHNL_VLAN_ETHERTYPE_XOR = BIT(30), + VIRTCHNL_VLAN_TOGGLE = BIT(31), +}; + +/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * for filtering, insertion, and stripping capabilities. + * + * If only outer capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. + * + * If only inner capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. Functionally this is the same as if only outer capabilities are + * supported. The VF driver is just forced to use the inner fields when + * adding/deleting filters and enabling/disabling offloads (if supported). + * + * If both outer and inner capabilities are supported (for filtering, insertion, + * and/or stripping) then outer refers to the outer most or single VLAN and + * inner refers to the second VLAN, if it exists, in the packet. + * + * There is no support for tunneled VLAN offloads, so outer or inner are never + * referring to a tunneled packet from the VF's perspective. + */ +struct virtchnl_vlan_supported_caps { + u32 outer; + u32 inner; +}; + +/* The PF populates these fields based on the supported VLAN filtering. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using + * the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN filtering setting if the + * VIRTCHNL_VLAN_TOGGLE bit is set. + * + * The ethertype(s) specified in the ethertype_init field are the ethertypes + * enabled for VLAN filtering. VLAN filtering in this case refers to the outer + * most VLAN from the VF's perspective. If both inner and outer filtering are + * allowed then ethertype_init only refers to the outer most VLAN as only + * VLAN ethertype supported for inner VLAN filtering is + * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled + * when both inner and outer filtering are allowed. + * + * The max_filters field tells the VF how many VLAN filters it's allowed to have + * at any one time. If it exceeds this amount and tries to add another filter, + * then the request will be rejected by the PF. To prevent failures, the VF + * should keep track of how many VLAN filters it has added and not attempt to + * add more than max_filters. + */ +struct virtchnl_vlan_filtering_caps { + struct virtchnl_vlan_supported_caps filtering_support; + u32 ethertype_init; + u16 max_filters; + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps); + +/* This enum is used for the virtchnl_vlan_offload_caps structure to specify + * if the PF supports a different ethertype for stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified + * for stripping affect the ethertype(s) specified for insertion and visa versa + * as well. If the VF tries to configure VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then + * that will be the ethertype for both stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for + * stripping do not affect the ethertype(s) specified for insertion and visa + * versa. + */ +enum virtchnl_vlan_ethertype_match { + VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0, + VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1, +}; + +/* The PF populates these fields based on the supported VLAN offloads. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN offload setting if the + * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set. + * + * The VF driver needs to be aware of how the tags are stripped by hardware and + * inserted by the VF driver based on the level of offload support. The PF will + * populate these fields based on where the VLAN tags are expected to be + * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to + * interpret these fields. See the definition of the + * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support + * enumeration. + */ +struct virtchnl_vlan_offload_caps { + struct virtchnl_vlan_supported_caps stripping_support; + struct virtchnl_vlan_supported_caps insertion_support; + u32 ethertype_init; + u8 ethertype_match; + u8 pad[3]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps); + +/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * VF sends this message to determine its VLAN capabilities. + * + * PF will mark which capabilities it supports based on hardware support and + * current configuration. For example, if a port VLAN is configured the PF will + * not allow outer VLAN filtering, stripping, or insertion to be configured so + * it will block these features from the VF. + * + * The VF will need to cross reference its capabilities with the PFs + * capabilities in the response message from the PF to determine the VLAN + * support. + */ +struct virtchnl_vlan_caps { + struct virtchnl_vlan_filtering_caps filtering; + struct virtchnl_vlan_offload_caps offloads; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps); + +struct virtchnl_vlan { + u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */ + u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in + * filtering caps + */ + u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in + * filtering caps. Note that tpid here does not refer to + * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the + * actual 2-byte VLAN TPID + */ + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan); + +struct virtchnl_vlan_filter { + struct virtchnl_vlan inner; + struct virtchnl_vlan outer; + u8 pad[16]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter); + +/* VIRTCHNL_OP_ADD_VLAN_V2 + * VIRTCHNL_OP_DEL_VLAN_V2 + * + * VF sends these messages to add/del one or more VLAN tag filters for Rx + * traffic. + * + * The PF attempts to add the filters and returns status. + * + * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the + * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS. + */ +struct virtchnl_vlan_filter_list_v2 { + u16 vport_id; + u16 num_elements; + u8 pad[4]; + struct virtchnl_vlan_filter filters[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2); + +/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 + * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 + * + * VF sends this message to enable or disable VLAN stripping or insertion. It + * also needs to specify an ethertype. The VF knows which VLAN ethertypes are + * allowed and whether or not it's allowed to enable/disable the specific + * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to + * parse the virtchnl_vlan_caps.offloads fields to determine which offload + * messages are allowed. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable and/or disable 0x8100 inner + * VLAN insertion and/or stripping via the opcodes listed above. Inner in this + * case means the outer most or single VLAN from the VF's perspective. This is + * because no outer offloads are supported. See the comments above the + * virtchnl_vlan_supported_caps structure for more details. + * + * virtchnl_vlan_caps.offloads.stripping_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_caps.offloads.insertion_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * In order to enable inner (again note that in this case inner is the outer + * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100 + * VLANs, the VF would populate the virtchnl_vlan_setting structure in the + * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.inner_ethertype_setting = + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * The reason that VLAN TPID(s) are not being used for the + * outer_ethertype_setting and inner_ethertype_setting fields is because it's + * possible a device could support VLAN insertion and/or stripping offload on + * multiple ethertypes concurrently, so this method allows a VF to request + * multiple ethertypes in one message using the virtchnl_vlan_support + * enumeration. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer + * VLAN insertion and stripping simultaneously. The + * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be + * populated based on what the PF can support. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF + * would populate the virthcnl_vlan_offload_structure in the following manner + * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.outer_ethertype_setting = + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * There is also the case where a PF and the underlying hardware can support + * VLAN offloads on multiple ethertypes, but not concurrently. For example, if + * the PF populates the virtchnl_vlan_caps.offloads in the following manner the + * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN + * offloads. The ethertypes must match for stripping and insertion. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.ethertype_match = + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION; + * + * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would + * populate the virtchnl_vlan_setting structure in the following manner and send + * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the + * ethertype for VLAN insertion if it's enabled. So, for completeness, a + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent. + * + * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + */ +struct virtchnl_vlan_setting { + u32 outer_ethertype_setting; + u32 inner_ethertype_setting; + u16 vport_id; + u8 pad[6]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting); + /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE * VF sends VSI id and flags. * PF returns status code in retval. @@ -1156,6 +1509,30 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode, case VIRTCHNL_OP_DEL_FDIR_FILTER: valid_len = sizeof(struct virtchnl_fdir_del); break; + case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS: + break; + case VIRTCHNL_OP_ADD_VLAN_V2: + case VIRTCHNL_OP_DEL_VLAN_V2: + valid_len = sizeof(struct virtchnl_vlan_filter_list_v2); + if (msglen >= valid_len) { + struct virtchnl_vlan_filter_list_v2 *vfl = + (struct virtchnl_vlan_filter_list_v2 *)msg; + + valid_len += (vfl->num_elements - 1) * + sizeof(struct virtchnl_vlan_filter); + + if (vfl->num_elements == 0) { + err_msg_format = true; + break; + } + } + break; + case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2: + case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2: + valid_len = sizeof(struct virtchnl_vlan_setting); + break; /* These are always errors coming from the VF. */ case VIRTCHNL_OP_EVENT: case VIRTCHNL_OP_UNKNOWN: |