diff options
62 files changed, 4159 insertions, 1322 deletions
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml new file mode 100644 index 000000000000..893d81e54caa --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI controllers + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this + node will always be a child of an FSI CFAM node; see fsi.txt for details on + FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of + SPI controllers. + +properties: + compatible: + enum: + - ibm,fsi2spi + + reg: + items: + - description: FSI slave address + +required: + - compatible + - reg + +examples: + - | + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 3c91ad430eea..b823b8625243 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply: @@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt new file mode 100644 index 000000000000..551867829459 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mp886x.txt @@ -0,0 +1,27 @@ +Monolithic Power Systems MP8867/MP8869 voltage regulator + +Required properties: +- compatible: Must be one of the following. + "mps,mp8867" + "mps,mp8869" +- reg: I2C slave address. +- enable-gpios: enable gpios. +- mps,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + +Any property defined as part of the core regulator binding, defined in +./regulator.txt, can also be used. + +Example: + + vcpu: regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 000000000000..f0acce2029fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + "^ldo[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index d126df043403..dea4384f4c03 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8994-regulators" "qcom,rpm-pm8998-regulators" "qcom,rpm-pma8084-regulators" + "qcom,rpm-pmi8994-regulators" "qcom,rpm-pmi8998-regulators" "qcom,rpm-pms405-regulators" @@ -146,6 +147,15 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_bst_byp-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_s4-supply: - vdd_s5-supply: - vdd_s6-supply: @@ -259,6 +269,9 @@ pma8084: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 +pmi8994: + s1, s2, s3, boost-bypass + pmi8998: bob diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml new file mode 100644 index 000000000000..d1a79d2ffa1e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ4019 VQMMC SD LDO regulator + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller, + in order to support both 1.8 and 3V I/O voltage levels an LDO + controller is also embedded. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: qcom,vqmmc-ipq4019-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 49b617c98ae7..9147df29022a 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -22,6 +22,7 @@ properties: enum: - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs + - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs interrupts: maxItems: 1 @@ -40,6 +41,27 @@ properties: items: - const: core +if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + +then: + properties: + clocks: + contains: + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock + + clock-names: + minItems: 2 + items: + - const: core + - const: pclk + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 2d3264140cc5..33bc58f4cf4b 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -10,7 +10,10 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ + - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM + - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN + - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml new file mode 100644 index 000000000000..2aa766759d59 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller + +maintainers: + - Chuanhong Guo <gch981213@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: qca,ar934x-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/ath79-clk.h> + spi: spi@1f000000 { + compatible = "qca,ar934x-spi"; + reg = <0x1f000000 0x1c>; + clocks = <&pll ATH79_CLK_AHB>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1e0ca6ccf64b..d8e5509a7081 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -52,6 +52,12 @@ properties: description: The SPI controller acts as a slave, instead of a master. +oneOf: + - required: + - "#address-cells" + - required: + - spi-slave + patternProperties: "^slave$": type: object @@ -114,7 +120,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MISO. + Bus width to the SPI bus used for read transfers. spi-rx-delay-us: description: @@ -126,7 +132,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MOSI. + Bus width to the SPI bus used for write transfers. spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 162e024b95a0..30a79da9c039 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,12 +1,17 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", - "fsl,ls2085a-dspi" - or - "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" +- compatible : must be one of: + "fsl,vf610-dspi", + "fsl,ls1021a-v1.0-dspi", + "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1028a-dspi", + "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), + "fsl,ls2085a-dspi", + "fsl,lx2160a-dspi", - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -14,11 +19,11 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. -- bus-num : the slave chip chipselect signal number. Optional property: - big-endian: If present the dspi device's registers are implemented in big endian mode. +- bus-num : the slave chip chipselect signal number. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5c495d..984ae7fd4f94 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml new file mode 100644 index 000000000000..0ae692dc28b5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SPI Multiplexer + +description: | + This binding describes a SPI bus multiplexer to route the SPI chip select + signals. This can be used when you need more devices than the SPI controller + has chip selects available. An example setup is shown in ASCII art; the actual + setting of the multiplexer to a channel needs to be done by a specific SPI mux + driver. + + MOSI /--------------------------------+--------+--------+--------\ + MISO |/------------------------------+|-------+|-------+|-------\| + SCL ||/----------------------------+||------+||------+||------\|| + ||| ||| ||| ||| ||| + +------------+ ||| ||| ||| ||| + | SoC ||| | +-+++-+ +-+++-+ +-+++-+ +-+++-+ + | ||| | | dev | | dev | | dev | | dev | + | +--+++-+ | CS-X +------+\ +--+--+ +--+--+ +--+--+ +--+--+ + | | SPI +-|-------+ Mux |\\ CS-0 | | | | + | +------+ | +--+---+\\\-------/ CS-1 | | | + | | | \\\----------------/ CS-2 | | + | +------+ | | \\-------------------------/ CS-3 | + | | ? +-|----------/ \----------------------------------/ + | +------+ | + +------------+ + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: spi-mux + + mux-controls: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - mux-controls + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; + + mux-controls = <&mux>; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; + + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt index 2cd67eb727d4..7ac60d9fe357 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt @@ -2,6 +2,9 @@ Required properties: - compatible : Should be "nxp,lx2160a-fspi" + "nxp,imx8qxp-fspi" + "nxp,imx8mm-fspi" + - reg : First contains the register location and length, Second contains the memory mapping address and length - reg-names : Should contain the resource reg names: diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted file mode 100644 index a0edac12d8df..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file mode 100644 index 000000000000..81ad4b761502 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPI Controller + +description: + The Rockchip SPI controller is used to interface with various devices such + as flash and display controllers using the SPI communication interface. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rk3036-spi + - const: rockchip,rk3066-spi + - const: rockchip,rk3228-spi + - const: rockchip,rv1108-spi + - items: + - enum: + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi + - const: rockchip,rk3066-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: transfer-clock + - description: peripheral clock + + clock-names: + items: + - const: spiclk + - const: apb_pclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rx-sample-delay-ns: + default: 0 + description: + Nano seconds to delay after the SCLK edge before sampling Rx data + (may need to be fine tuned for high capacitance lines). + If not specified 0 will be used. + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + description: + Names for the pin configuration(s); may be "default" or "sleep", + where the "sleep" configuration may describe the state + the pins should be in during system suspend. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + rx-sample-delay-ns = <10>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 31150aef537f..211109eda314 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2293,6 +2293,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/ @@ -6878,6 +6879,13 @@ S: Maintained F: drivers/i2c/busses/i2c-fsi.c F: Documentation/devicetree/bindings/i2c/i2c-fsi.txt +FSI-ATTACHED SPI DRIVER +M: Eddie James <eajames@linux.ibm.com> +L: linux-spi@vger.kernel.org +S: Maintained +F: drivers/spi/spi-fsi.c +F: Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml + FSNOTIFY: FILESYSTEM NOTIFICATION INFRASTRUCTURE M: Jan Kara <jack@suse.cz> R: Amir Goldstein <amir73il@gmail.com> @@ -11283,7 +11291,8 @@ F: drivers/tty/mxser.* MONOLITHIC POWER SYSTEM PMIC DRIVER M: Saravanan Sekar <sravanhome@gmail.com> S: Maintained -F: Documentation/devicetree/bindings/regulator/mpq7920.yaml +F: Documentation/devicetree/bindings/regulator/mps,mp*.yaml +F: drivers/regulator/mp5416.c F: drivers/regulator/mpq7920.c F: drivers/regulator/mpq7920.h diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index c1eda67d1ad2..267b9000782e 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -52,14 +52,6 @@ config SPI_HISI_SFC help This enables support for HiSilicon FMC SPI-NOR flash controller. -config SPI_MTK_QUADSPI - tristate "MediaTek Quad SPI controller" - depends on HAS_IOMEM - help - This enables support for the Quad SPI controller in master mode. - This controller does not support generic SPI. It only supports - SPI NOR. - config SPI_NXP_SPIFI tristate "NXP SPI Flash Interface (SPIFI)" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 9c5ed03cdc19..738dfd74cf76 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o -obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c deleted file mode 100644 index b1691680d174..000000000000 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ /dev/null @@ -1,565 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015 MediaTek Inc. - * Author: Bayi Cheng <bayi.cheng@mediatek.com> - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/iopoll.h> -#include <linux/ioport.h> -#include <linux/math64.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> - -#define MTK_NOR_CMD_REG 0x00 -#define MTK_NOR_CNT_REG 0x04 -#define MTK_NOR_RDSR_REG 0x08 -#define MTK_NOR_RDATA_REG 0x0c -#define MTK_NOR_RADR0_REG 0x10 -#define MTK_NOR_RADR1_REG 0x14 -#define MTK_NOR_RADR2_REG 0x18 -#define MTK_NOR_WDATA_REG 0x1c -#define MTK_NOR_PRGDATA0_REG 0x20 -#define MTK_NOR_PRGDATA1_REG 0x24 -#define MTK_NOR_PRGDATA2_REG 0x28 -#define MTK_NOR_PRGDATA3_REG 0x2c -#define MTK_NOR_PRGDATA4_REG 0x30 -#define MTK_NOR_PRGDATA5_REG 0x34 -#define MTK_NOR_SHREG0_REG 0x38 -#define MTK_NOR_SHREG1_REG 0x3c -#define MTK_NOR_SHREG2_REG 0x40 -#define MTK_NOR_SHREG3_REG 0x44 -#define MTK_NOR_SHREG4_REG 0x48 -#define MTK_NOR_SHREG5_REG 0x4c -#define MTK_NOR_SHREG6_REG 0x50 -#define MTK_NOR_SHREG7_REG 0x54 -#define MTK_NOR_SHREG8_REG 0x58 -#define MTK_NOR_SHREG9_REG 0x5c -#define MTK_NOR_CFG1_REG 0x60 -#define MTK_NOR_CFG2_REG 0x64 -#define MTK_NOR_CFG3_REG 0x68 -#define MTK_NOR_STATUS0_REG 0x70 -#define MTK_NOR_STATUS1_REG 0x74 -#define MTK_NOR_STATUS2_REG 0x78 -#define MTK_NOR_STATUS3_REG 0x7c -#define MTK_NOR_FLHCFG_REG 0x84 -#define MTK_NOR_TIME_REG 0x94 -#define MTK_NOR_PP_DATA_REG 0x98 -#define MTK_NOR_PREBUF_STUS_REG 0x9c -#define MTK_NOR_DELSEL0_REG 0xa0 -#define MTK_NOR_DELSEL1_REG 0xa4 -#define MTK_NOR_INTRSTUS_REG 0xa8 -#define MTK_NOR_INTREN_REG 0xac -#define MTK_NOR_CHKSUM_CTL_REG 0xb8 -#define MTK_NOR_CHKSUM_REG 0xbc -#define MTK_NOR_CMD2_REG 0xc0 -#define MTK_NOR_WRPROT_REG 0xc4 -#define MTK_NOR_RADR3_REG 0xc8 -#define MTK_NOR_DUAL_REG 0xcc -#define MTK_NOR_DELSEL2_REG 0xd0 -#define MTK_NOR_DELSEL3_REG 0xd4 -#define MTK_NOR_DELSEL4_REG 0xd8 - -/* commands for mtk nor controller */ -#define MTK_NOR_READ_CMD 0x0 -#define MTK_NOR_RDSR_CMD 0x2 -#define MTK_NOR_PRG_CMD 0x4 -#define MTK_NOR_WR_CMD 0x10 -#define MTK_NOR_PIO_WR_CMD 0x90 -#define MTK_NOR_WRSR_CMD 0x20 -#define MTK_NOR_PIO_READ_CMD 0x81 -#define MTK_NOR_WR_BUF_ENABLE 0x1 -#define MTK_NOR_WR_BUF_DISABLE 0x0 -#define MTK_NOR_ENABLE_SF_CMD 0x30 -#define MTK_NOR_DUAD_ADDR_EN 0x8 -#define MTK_NOR_QUAD_READ_EN 0x4 -#define MTK_NOR_DUAL_ADDR_EN 0x2 -#define MTK_NOR_DUAL_READ_EN 0x1 -#define MTK_NOR_DUAL_DISABLE 0x0 -#define MTK_NOR_FAST_READ 0x1 - -#define SFLASH_WRBUF_SIZE 128 - -/* Can shift up to 48 bits (6 bytes) of TX/RX */ -#define MTK_NOR_MAX_RX_TX_SHIFT 6 -/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */ -#define MTK_NOR_MAX_SHIFT 7 -/* nor controller 4-byte address mode enable bit */ -#define MTK_NOR_4B_ADDR_EN BIT(4) - -/* Helpers for accessing the program data / shift data registers */ -#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n)) -#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n)) - -struct mtk_nor { - struct spi_nor nor; - struct device *dev; - void __iomem *base; /* nor flash base address */ - struct clk *spi_clk; - struct clk *nor_clk; -}; - -static void mtk_nor_set_read_mode(struct mtk_nor *mtk_nor) -{ - struct spi_nor *nor = &mtk_nor->nor; - - switch (nor->read_proto) { - case SNOR_PROTO_1_1_1: - writeb(nor->read_opcode, mtk_nor->base + - MTK_NOR_PRGDATA3_REG); - writeb(MTK_NOR_FAST_READ, mtk_nor->base + - MTK_NOR_CFG1_REG); - break; - case SNOR_PROTO_1_1_2: - writeb(nor->read_opcode, mtk_nor->base + - MTK_NOR_PRGDATA3_REG); - writeb(MTK_NOR_DUAL_READ_EN, mtk_nor->base + - MTK_NOR_DUAL_REG); - break; - case SNOR_PROTO_1_1_4: - writeb(nor->read_opcode, mtk_nor->base + - MTK_NOR_PRGDATA4_REG); - writeb(MTK_NOR_QUAD_READ_EN, mtk_nor->base + - MTK_NOR_DUAL_REG); - break; - default: - writeb(MTK_NOR_DUAL_DISABLE, mtk_nor->base + - MTK_NOR_DUAL_REG); - break; - } -} - -static int mtk_nor_execute_cmd(struct mtk_nor *mtk_nor, u8 cmdval) -{ - int reg; - u8 val = cmdval & 0x1f; - - writeb(cmdval, mtk_nor->base + MTK_NOR_CMD_REG); - return readl_poll_timeout(mtk_nor->base + MTK_NOR_CMD_REG, reg, - !(reg & val), 100, 10000); -} - -static int mtk_nor_do_tx_rx(struct mtk_nor *mtk_nor, u8 op, - const u8 *tx, size_t txlen, u8 *rx, size_t rxlen) -{ - size_t len = 1 + txlen + rxlen; - int i, ret, idx; - - if (len > MTK_NOR_MAX_SHIFT) - return -EINVAL; - - writeb(len * 8, mtk_nor->base + MTK_NOR_CNT_REG); - - /* start at PRGDATA5, go down to PRGDATA0 */ - idx = MTK_NOR_MAX_RX_TX_SHIFT - 1; - - /* opcode */ - writeb(op, mtk_nor->base + MTK_NOR_PRG_REG(idx)); - idx--; - - /* program TX data */ - for (i = 0; i < txlen; i++, idx--) - writeb(tx[i], mtk_nor->base + MTK_NOR_PRG_REG(idx)); - - /* clear out rest of TX registers */ - while (idx >= 0) { - writeb(0, mtk_nor->base + MTK_NOR_PRG_REG(idx)); - idx--; - } - - ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PRG_CMD); - if (ret) - return ret; - - /* restart at first RX byte */ - idx = rxlen - 1; - - /* read out RX data */ - for (i = 0; i < rxlen; i++, idx--) - rx[i] = readb(mtk_nor->base + MTK_NOR_SHREG(idx)); - - return 0; -} - -/* Do a WRSR (Write Status Register) command */ -static int mtk_nor_wr_sr(struct mtk_nor *mtk_nor, const u8 sr) -{ - writeb(sr, mtk_nor->base + MTK_NOR_PRGDATA5_REG); - writeb(8, mtk_nor->base + MTK_NOR_CNT_REG); - return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WRSR_CMD); -} - -static int mtk_nor_write_buffer_enable(struct mtk_nor *mtk_nor) -{ - u8 reg; - - /* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer - * 0: pre-fetch buffer use for read - * 1: pre-fetch buffer use for page program - */ - writel(MTK_NOR_WR_BUF_ENABLE, mtk_nor->base + MTK_NOR_CFG2_REG); - return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg, - 0x01 == (reg & 0x01), 100, 10000); -} - -static int mtk_nor_write_buffer_disable(struct mtk_nor *mtk_nor) -{ - u8 reg; - - writel(MTK_NOR_WR_BUF_DISABLE, mtk_nor->base + MTK_NOR_CFG2_REG); - return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg, - MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100, - 10000); -} - -static void mtk_nor_set_addr_width(struct mtk_nor *mtk_nor) -{ - u8 val; - struct spi_nor *nor = &mtk_nor->nor; - - val = readb(mtk_nor->base + MTK_NOR_DUAL_REG); - - switch (nor->addr_width) { - case 3: - val &= ~MTK_NOR_4B_ADDR_EN; - break; - case 4: - val |= MTK_NOR_4B_ADDR_EN; - break; - default: - dev_warn(mtk_nor->dev, "Unexpected address width %u.\n", - nor->addr_width); - break; - } - - writeb(val, mtk_nor->base + MTK_NOR_DUAL_REG); -} - -static void mtk_nor_set_addr(struct mtk_nor *mtk_nor, u32 addr) -{ - int i; - - mtk_nor_set_addr_width(mtk_nor); - - for (i = 0; i < 3; i++) { - writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR0_REG + i * 4); - addr >>= 8; - } - /* Last register is non-contiguous */ - writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR3_REG); -} - -static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length, - u_char *buffer) -{ - int i, ret; - int addr = (int)from; - u8 *buf = (u8 *)buffer; - struct mtk_nor *mtk_nor = nor->priv; - - /* set mode for fast read mode ,dual mode or quad mode */ - mtk_nor_set_read_mode(mtk_nor); - mtk_nor_set_addr(mtk_nor, addr); - - for (i = 0; i < length; i++) { - ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_READ_CMD); - if (ret < 0) - return ret; - buf[i] = readb(mtk_nor->base + MTK_NOR_RDATA_REG); - } - return length; -} - -static int mtk_nor_write_single_byte(struct mtk_nor *mtk_nor, - int addr, int length, u8 *data) -{ - int i, ret; - - mtk_nor_set_addr(mtk_nor, addr); - - for (i = 0; i < length; i++) { - writeb(*data++, mtk_nor->base + MTK_NOR_WDATA_REG); - ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_WR_CMD); - if (ret < 0) - return ret; - } - return 0; -} - -static int mtk_nor_write_buffer(struct mtk_nor *mtk_nor, int addr, - const u8 *buf) -{ - int i, bufidx, data; - - mtk_nor_set_addr(mtk_nor, addr); - - bufidx = 0; - for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) { - data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 | - buf[bufidx + 1]<<8 | buf[bufidx]; - bufidx += 4; - writel(data, mtk_nor->base + MTK_NOR_PP_DATA_REG); - } - return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WR_CMD); -} - -static ssize_t mtk_nor_write(struct spi_nor *nor, loff_t to, size_t len, - const u_char *buf) -{ - int ret; - struct mtk_nor *mtk_nor = nor->priv; - size_t i; - - ret = mtk_nor_write_buffer_enable(mtk_nor); - if (ret < 0) { - dev_warn(mtk_nor->dev, "write buffer enable failed!\n"); - return ret; - } - - for (i = 0; i + SFLASH_WRBUF_SIZE <= len; i += SFLASH_WRBUF_SIZE) { - ret = mtk_nor_write_buffer(mtk_nor, to, buf); - if (ret < 0) { - dev_err(mtk_nor->dev, "write buffer failed!\n"); - return ret; - } - to += SFLASH_WRBUF_SIZE; - buf += SFLASH_WRBUF_SIZE; - } - ret = mtk_nor_write_buffer_disable(mtk_nor); - if (ret < 0) { - dev_warn(mtk_nor->dev, "write buffer disable failed!\n"); - return ret; - } - - if (i < len) { - ret = mtk_nor_write_single_byte(mtk_nor, to, - (int)(len - i), (u8 *)buf); - if (ret < 0) { - dev_err(mtk_nor->dev, "write single byte failed!\n"); - return ret; - } - } - - return len; -} - -static int mtk_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len) -{ - int ret; - struct mtk_nor *mtk_nor = nor->priv; - - switch (opcode) { - case SPINOR_OP_RDSR: - ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_RDSR_CMD); - if (ret < 0) - return ret; - if (len == 1) - *buf = readb(mtk_nor->base + MTK_NOR_RDSR_REG); - else - dev_err(mtk_nor->dev, "len should be 1 for read status!\n"); - break; - default: - ret = mtk_nor_do_tx_rx(mtk_nor, opcode, NULL, 0, buf, len); - break; - } - return ret; -} - -static int mtk_nor_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, - size_t len) -{ - int ret; - struct mtk_nor *mtk_nor = nor->priv; - - switch (opcode) { - case SPINOR_OP_WRSR: - /* We only handle 1 byte */ - ret = mtk_nor_wr_sr(mtk_nor, *buf); - break; - default: - ret = mtk_nor_do_tx_rx(mtk_nor, opcode, buf, len, NULL, 0); - if (ret) - dev_warn(mtk_nor->dev, "write reg failure!\n"); - break; - } - return ret; -} - -static void mtk_nor_disable_clk(struct mtk_nor *mtk_nor) -{ - clk_disable_unprepare(mtk_nor->spi_clk); - clk_disable_unprepare(mtk_nor->nor_clk); -} - -static int mtk_nor_enable_clk(struct mtk_nor *mtk_nor) -{ - int ret; - - ret = clk_prepare_enable(mtk_nor->spi_clk); - if (ret) - return ret; - - ret = clk_prepare_enable(mtk_nor->nor_clk); - if (ret) { - clk_disable_unprepare(mtk_nor->spi_clk); - return ret; - } - - return 0; -} - -static const struct spi_nor_controller_ops mtk_controller_ops = { - .read_reg = mtk_nor_read_reg, - .write_reg = mtk_nor_write_reg, - .read = mtk_nor_read, - .write = mtk_nor_write, -}; - -static int mtk_nor_init(struct mtk_nor *mtk_nor, - struct device_node *flash_node) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_READ_1_1_2 | - SNOR_HWCAPS_PP, - }; - int ret; - struct spi_nor *nor; - - /* initialize controller to accept commands */ - writel(MTK_NOR_ENABLE_SF_CMD, mtk_nor->base + MTK_NOR_WRPROT_REG); - - nor = &mtk_nor->nor; - nor->dev = mtk_nor->dev; - nor->priv = mtk_nor; - spi_nor_set_flash_node(nor, flash_node); - nor->controller_ops = &mtk_controller_ops; - - nor->mtd.name = "mtk_nor"; - /* initialized with NULL */ - ret = spi_nor_scan(nor, NULL, &hwcaps); - if (ret) - return ret; - - return mtd_device_register(&nor->mtd, NULL, 0); -} - -static int mtk_nor_drv_probe(struct platform_device *pdev) -{ - struct device_node *flash_np; - struct resource *res; - int ret; - struct mtk_nor *mtk_nor; - - if (!pdev->dev.of_node) { - dev_err(&pdev->dev, "No DT found\n"); - return -EINVAL; - } - - mtk_nor = devm_kzalloc(&pdev->dev, sizeof(*mtk_nor), GFP_KERNEL); - if (!mtk_nor) - return -ENOMEM; - platform_set_drvdata(pdev, mtk_nor); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mtk_nor->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mtk_nor->base)) - return PTR_ERR(mtk_nor->base); - - mtk_nor->spi_clk = devm_clk_get(&pdev->dev, "spi"); - if (IS_ERR(mtk_nor->spi_clk)) - return PTR_ERR(mtk_nor->spi_clk); - - mtk_nor->nor_clk = devm_clk_get(&pdev->dev, "sf"); - if (IS_ERR(mtk_nor->nor_clk)) - return PTR_ERR(mtk_nor->nor_clk); - - mtk_nor->dev = &pdev->dev; - - ret = mtk_nor_enable_clk(mtk_nor); - if (ret) - return ret; - - /* only support one attached flash */ - flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); - if (!flash_np) { - dev_err(&pdev->dev, "no SPI flash device to configure\n"); - ret = -ENODEV; - goto nor_free; - } - ret = mtk_nor_init(mtk_nor, flash_np); - -nor_free: - if (ret) - mtk_nor_disable_clk(mtk_nor); - - return ret; -} - -static int mtk_nor_drv_remove(struct platform_device *pdev) -{ - struct mtk_nor *mtk_nor = platform_get_drvdata(pdev); - - mtk_nor_disable_clk(mtk_nor); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int mtk_nor_suspend(struct device *dev) -{ - struct mtk_nor *mtk_nor = dev_get_drvdata(dev); - - mtk_nor_disable_clk(mtk_nor); - - return 0; -} - -static int mtk_nor_resume(struct device *dev) -{ - struct mtk_nor *mtk_nor = dev_get_drvdata(dev); - - return mtk_nor_enable_clk(mtk_nor); -} - -static const struct dev_pm_ops mtk_nor_dev_pm_ops = { - .suspend = mtk_nor_suspend, - .resume = mtk_nor_resume, -}; - -#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops) -#else -#define MTK_NOR_DEV_PM_OPS NULL -#endif - -static const struct of_device_id mtk_nor_of_ids[] = { - { .compatible = "mediatek,mt8173-nor"}, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mtk_nor_of_ids); - -static struct platform_driver mtk_nor_driver = { - .probe = mtk_nor_drv_probe, - .remove = mtk_nor_drv_remove, - .driver = { - .name = "mtk-nor", - .pm = MTK_NOR_DEV_PM_OPS, - .of_match_table = mtk_nor_of_ids, - }, -}; - -module_platform_driver(mtk_nor_driver); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 074a2ef55943..f4b72cb098ef 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -107,6 +107,7 @@ config REGULATOR_AD5398 config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on ARCH_MXC || COMPILE_TEST depends on MFD_SYSCON help Say y here to support Freescale i.MX on-chip ANATOP LDOs @@ -613,6 +614,16 @@ config REGULATOR_MCP16502 through the regulator interface. In addition it enables suspend-to-ram/standby transition. +config REGULATOR_MP5416 + tristate "Monolithic MP5416 PMIC" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the MP5416 PMIC. This will enable supports + the software controllable 4 buck and 4 LDO regulators. + Say M here if you want to include support for the regulator as a + module. + config REGULATOR_MP8859 tristate "MPS MP8859 regulator driver" depends on I2C @@ -624,6 +635,13 @@ config REGULATOR_MP8859 Say M here if you want to include support for the regulator as a module. The module will be named "mp8859". +config REGULATOR_MP886X + tristate "MPS MP8869 regulator driver" + depends on I2C && (OF || COMPILE_TEST) + select REGMAP_I2C + help + This driver supports the MP8869 voltage regulator. + config REGULATOR_MPQ7920 tristate "Monolithic MPQ7920 PMIC" depends on I2C && OF diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index c0d6b96ebd78..6610ee001d9a 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -78,7 +78,9 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o +obj-$(CONFIG_REGULATOR_MP5416) += mp5416.o obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o +obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 754739d004e5..ca92b3de0e9c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -305,9 +305,13 @@ static int anatop_regulator_probe(struct platform_device *pdev) /* register regulator */ rdev = devm_regulator_register(dev, rdesc, &config); if (IS_ERR(rdev)) { - dev_err(dev, "failed to register %s\n", - rdesc->name); - return PTR_ERR(rdev); + ret = PTR_ERR(rdev); + if (ret == -EPROBE_DEFER) + dev_dbg(dev, "failed to register %s, deferring...\n", + rdesc->name); + else + dev_err(dev, "failed to register %s\n", rdesc->name); + return ret; } platform_set_drvdata(pdev, rdev); diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 16f0c8570036..1e6eb5b1f8d8 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -381,8 +381,7 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK | AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK; enable = (ramp > 0) ? - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : - !AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN; + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0; break; } @@ -393,8 +392,7 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK | AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK; enable = (ramp > 0) ? - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : - !AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN; + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0; break; } diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 51b6a2dea717..c340505150b6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1849,7 +1849,6 @@ struct regulator *_regulator_get(struct device *dev, const char *id, { struct regulator_dev *rdev; struct regulator *regulator; - const char *devname = dev ? dev_name(dev) : "deviceless"; struct device_link *link; int ret; @@ -1887,9 +1886,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id, * enabled, even if it isn't hooked up, and just * provide a dummy. */ - dev_warn(dev, - "%s supply %s not found, using dummy regulator\n", - devname, id); + dev_warn(dev, "supply %s not found, using dummy regulator\n", id); rdev = dummy_regulator_rdev; get_device(&rdev->dev); break; diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c index d3ce0278bfbe..d8112f56e94e 100644 --- a/drivers/regulator/da9062-regulator.c +++ b/drivers/regulator/da9062-regulator.c @@ -73,7 +73,7 @@ struct da9062_regulators { int irq_ldo_lim; unsigned n_regulators; /* Array size to be defined during init. Keep at end. */ - struct da9062_regulator regulator[0]; + struct da9062_regulator regulator[]; }; /* Regulator operations */ diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 2aceb3b7afc2..e1d6c8f6d40b 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -66,7 +66,7 @@ struct da9063_regulator_data { }; struct da9063_regulators_pdata { - unsigned n_regulators; + unsigned int n_regulators; struct da9063_regulator_data *regulator_data; }; @@ -100,6 +100,7 @@ struct da9063_regulator_info { .desc.vsel_mask = DA9063_V##regl_name##_MASK, \ .desc.linear_min_sel = DA9063_V##regl_name##_BIAS, \ .sleep = BFIELD(DA9063_REG_V##regl_name##_A, DA9063_LDO_SL), \ + .suspend = BFIELD(DA9063_REG_##regl_name##_CONT, DA9063_LDO_CONF), \ .suspend_sleep = BFIELD(DA9063_REG_V##regl_name##_B, DA9063_LDO_SL), \ .suspend_vsel_reg = DA9063_REG_V##regl_name##_B @@ -124,6 +125,7 @@ struct da9063_regulator_info { .desc.vsel_mask = DA9063_VBUCK_MASK, \ .desc.linear_min_sel = DA9063_VBUCK_BIAS, \ .sleep = BFIELD(DA9063_REG_V##regl_name##_A, DA9063_BUCK_SL), \ + .suspend = BFIELD(DA9063_REG_##regl_name##_CONT, DA9063_BUCK_CONF), \ .suspend_sleep = BFIELD(DA9063_REG_V##regl_name##_B, DA9063_BUCK_SL), \ .suspend_vsel_reg = DA9063_REG_V##regl_name##_B, \ .mode = BFIELD(DA9063_REG_##regl_name##_CFG, DA9063_BUCK_MODE_MASK) @@ -131,7 +133,7 @@ struct da9063_regulator_info { /* Defines asignment of regulators info table to chip model */ struct da9063_dev_model { const struct da9063_regulator_info *regulator_info; - unsigned n_regulators; + unsigned int n_regulators; enum da9063_type type; }; @@ -150,9 +152,9 @@ struct da9063_regulator { /* Encapsulates all information for the regulators driver */ struct da9063_regulators { - unsigned n_regulators; + unsigned int n_regulators; /* Array size to be defined during init. Keep at end. */ - struct da9063_regulator regulator[0]; + struct da9063_regulator regulator[]; }; /* BUCK modes for DA9063 */ @@ -165,38 +167,46 @@ enum { /* Regulator operations */ -/* Current limits array (in uA) for BCORE1, BCORE2, BPRO. - Entry indexes corresponds to register values. */ +/* + * Current limits array (in uA) for BCORE1, BCORE2, BPRO. + * Entry indexes corresponds to register values. + */ static const unsigned int da9063_buck_a_limits[] = { 500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000 }; -/* Current limits array (in uA) for BMEM, BIO, BPERI. - Entry indexes corresponds to register values. */ +/* + * Current limits array (in uA) for BMEM, BIO, BPERI. + * Entry indexes corresponds to register values. + */ static const unsigned int da9063_buck_b_limits[] = { 1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000 }; -/* Current limits array (in uA) for merged BCORE1 and BCORE2. - Entry indexes corresponds to register values. */ +/* + * Current limits array (in uA) for merged BCORE1 and BCORE2. + * Entry indexes corresponds to register values. + */ static const unsigned int da9063_bcores_merged_limits[] = { 1000000, 1200000, 1400000, 1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000, 3600000, 3800000, 4000000 }; -/* Current limits array (in uA) for merged BMEM and BIO. - Entry indexes corresponds to register values. */ +/* + * Current limits array (in uA) for merged BMEM and BIO. + * Entry indexes corresponds to register values. + */ static const unsigned int da9063_bmem_bio_merged_limits[] = { 3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000 }; -static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned mode) +static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); - unsigned val; + unsigned int val; switch (mode) { case REGULATOR_MODE_FAST: @@ -221,10 +231,9 @@ static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned mode) * There are 3 modes to map to: FAST, NORMAL, and STANDBY. */ -static unsigned da9063_buck_get_mode(struct regulator_dev *rdev) +static unsigned int da9063_buck_get_mode(struct regulator_dev *rdev) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); - struct regmap_field *field; unsigned int val; int ret; @@ -245,18 +254,7 @@ static unsigned da9063_buck_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_NORMAL; } - /* Detect current regulator state */ - ret = regmap_field_read(regl->suspend, &val); - if (ret < 0) - return 0; - - /* Read regulator mode from proper register, depending on state */ - if (val) - field = regl->suspend_sleep; - else - field = regl->sleep; - - ret = regmap_field_read(field, &val); + ret = regmap_field_read(regl->sleep, &val); if (ret < 0) return 0; @@ -271,10 +269,10 @@ static unsigned da9063_buck_get_mode(struct regulator_dev *rdev) * There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state. */ -static int da9063_ldo_set_mode(struct regulator_dev *rdev, unsigned mode) +static int da9063_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); - unsigned val; + unsigned int val; switch (mode) { case REGULATOR_MODE_NORMAL: @@ -290,24 +288,12 @@ static int da9063_ldo_set_mode(struct regulator_dev *rdev, unsigned mode) return regmap_field_write(regl->sleep, val); } -static unsigned da9063_ldo_get_mode(struct regulator_dev *rdev) +static unsigned int da9063_ldo_get_mode(struct regulator_dev *rdev) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); - struct regmap_field *field; int ret, val; - /* Detect current regulator state */ - ret = regmap_field_read(regl->suspend, &val); - if (ret < 0) - return 0; - - /* Read regulator mode from proper register, depending on state */ - if (val) - field = regl->suspend_sleep; - else - field = regl->sleep; - - ret = regmap_field_read(field, &val); + ret = regmap_field_read(regl->sleep, &val); if (ret < 0) return 0; @@ -383,7 +369,8 @@ static int da9063_suspend_disable(struct regulator_dev *rdev) return regmap_field_write(regl->suspend, 0); } -static int da9063_buck_set_suspend_mode(struct regulator_dev *rdev, unsigned mode) +static int da9063_buck_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); int val; @@ -405,10 +392,11 @@ static int da9063_buck_set_suspend_mode(struct regulator_dev *rdev, unsigned mod return regmap_field_write(regl->mode, val); } -static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev, unsigned mode) +static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) { struct da9063_regulator *regl = rdev_get_drvdata(rdev); - unsigned val; + unsigned int val; switch (mode) { case REGULATOR_MODE_NORMAL: @@ -465,42 +453,36 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { da9063_buck_a_limits, DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BCORE1), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL), }, { DA9063_BUCK(DA9063, BCORE2, 300, 10, 1570, da9063_buck_a_limits, DA9063_REG_BUCK_ILIM_C, DA9063_BCORE2_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BCORE2), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE2_SEL), }, { DA9063_BUCK(DA9063, BPRO, 530, 10, 1800, da9063_buck_a_limits, DA9063_REG_BUCK_ILIM_B, DA9063_BPRO_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BPRO), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPRO_SEL), }, { DA9063_BUCK(DA9063, BMEM, 800, 20, 3340, da9063_buck_b_limits, DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BMEM), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL), }, { DA9063_BUCK(DA9063, BIO, 800, 20, 3340, da9063_buck_b_limits, DA9063_REG_BUCK_ILIM_A, DA9063_BIO_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BIO), - .suspend = BFIELD(DA9063_REG_DVC_2, DA9063_VBIO_SEL), }, { DA9063_BUCK(DA9063, BPERI, 800, 20, 3340, da9063_buck_b_limits, DA9063_REG_BUCK_ILIM_B, DA9063_BPERI_ILIM_MASK), DA9063_BUCK_COMMON_FIELDS(BPERI), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPERI_SEL), }, { DA9063_BUCK(DA9063, BCORES_MERGED, 300, 10, 1570, @@ -508,7 +490,6 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK), /* BCORES_MERGED uses the same register fields as BCORE1 */ DA9063_BUCK_COMMON_FIELDS(BCORE1), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL), }, { DA9063_BUCK(DA9063, BMEM_BIO_MERGED, 800, 20, 3340, @@ -516,21 +497,17 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK), /* BMEM_BIO_MERGED uses the same register fields as BMEM */ DA9063_BUCK_COMMON_FIELDS(BMEM), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL), }, { DA9063_LDO(DA9063, LDO3, 900, 20, 3440), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO3_SEL), .oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO3_LIM), }, { DA9063_LDO(DA9063, LDO7, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO7_CONT, DA9063_VLDO7_SEL), .oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO7_LIM), }, { DA9063_LDO(DA9063, LDO8, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO8_CONT, DA9063_VLDO8_SEL), .oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO8_LIM), }, { @@ -539,36 +516,29 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { }, { DA9063_LDO(DA9063, LDO11, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO11_CONT, DA9063_VLDO11_SEL), .oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO11_LIM), }, /* The following LDOs are present only on DA9063, not on DA9063L */ { DA9063_LDO(DA9063, LDO1, 600, 20, 1860), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO1_SEL), }, { DA9063_LDO(DA9063, LDO2, 600, 20, 1860), - .suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO2_SEL), }, { DA9063_LDO(DA9063, LDO4, 900, 20, 3440), - .suspend = BFIELD(DA9063_REG_DVC_2, DA9063_VLDO4_SEL), .oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO4_LIM), }, { DA9063_LDO(DA9063, LDO5, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO5_CONT, DA9063_VLDO5_SEL), }, { DA9063_LDO(DA9063, LDO6, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO6_CONT, DA9063_VLDO6_SEL), }, { DA9063_LDO(DA9063, LDO10, 900, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO10_CONT, DA9063_VLDO10_SEL), }, }; @@ -593,7 +563,7 @@ static irqreturn_t da9063_ldo_lim_event(int irq, void *data) struct da9063_regulators *regulators = data; struct da9063 *hw = regulators->regulator[0].hw; struct da9063_regulator *regl; - int bits, i , ret; + int bits, i, ret; ret = regmap_read(hw->regmap, DA9063_REG_STATUS_D, &bits); if (ret < 0) @@ -605,10 +575,10 @@ static irqreturn_t da9063_ldo_lim_event(int irq, void *data) continue; if (BIT(regl->info->oc_event.lsb) & bits) { - regulator_lock(regl->rdev); + regulator_lock(regl->rdev); regulator_notifier_call_chain(regl->rdev, REGULATOR_EVENT_OVER_CURRENT, NULL); - regulator_unlock(regl->rdev); + regulator_unlock(regl->rdev); } } @@ -833,7 +803,7 @@ static int da9063_regulator_probe(struct platform_device *pdev) if (regl->info->suspend_sleep.reg) { regl->suspend_sleep = devm_regmap_field_alloc(&pdev->dev, - da9063->regmap, regl->info->suspend_sleep); + da9063->regmap, regl->info->suspend_sleep); if (IS_ERR(regl->suspend_sleep)) return PTR_ERR(regl->suspend_sleep); } @@ -867,12 +837,10 @@ static int da9063_regulator_probe(struct platform_device *pdev) NULL, da9063_ldo_lim_event, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "LDO_LIM", regulators); - if (ret) { + if (ret) dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n"); - return ret; - } - return 0; + return ret; } static struct platform_driver da9063_regulator_driver = { diff --git a/drivers/regulator/mp5416.c b/drivers/regulator/mp5416.c new file mode 100644 index 000000000000..67ce1b52a1a1 --- /dev/null +++ b/drivers/regulator/mp5416.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// mp5416.c - regulator driver for mps mp5416 +// +// Copyright 2020 Monolithic Power Systems, Inc +// +// Author: Saravanan Sekar <sravanhome@gmail.com> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/i2c.h> + +#define MP5416_REG_CTL0 0x00 +#define MP5416_REG_CTL1 0x01 +#define MP5416_REG_CTL2 0x02 +#define MP5416_REG_ILIM 0x03 +#define MP5416_REG_BUCK1 0x04 +#define MP5416_REG_BUCK2 0x05 +#define MP5416_REG_BUCK3 0x06 +#define MP5416_REG_BUCK4 0x07 +#define MP5416_REG_LDO1 0x08 +#define MP5416_REG_LDO2 0x09 +#define MP5416_REG_LDO3 0x0a +#define MP5416_REG_LDO4 0x0b + +#define MP5416_REGULATOR_EN BIT(7) +#define MP5416_MASK_VSET 0x7f +#define MP5416_MASK_BUCK1_ILIM 0xc0 +#define MP5416_MASK_BUCK2_ILIM 0x0c +#define MP5416_MASK_BUCK3_ILIM 0x30 +#define MP5416_MASK_BUCK4_ILIM 0x03 +#define MP5416_MASK_DVS_SLEWRATE 0xc0 + +/* values in uV */ +#define MP5416_VOLT1_MIN 600000 +#define MP5416_VOLT1_MAX 2187500 +#define MP5416_VOLT1_STEP 12500 +#define MP5416_VOLT2_MIN 800000 +#define MP5416_VOLT2_MAX 3975000 +#define MP5416_VOLT2_STEP 25000 + +#define MP5416_VOLT1_RANGE \ + ((MP5416_VOLT1_MAX - MP5416_VOLT1_MIN)/MP5416_VOLT1_STEP + 1) +#define MP5416_VOLT2_RANGE \ + ((MP5416_VOLT2_MAX - MP5416_VOLT2_MIN)/MP5416_VOLT2_STEP + 1) + +#define MP5416BUCK(_name, _id, _ilim, _dreg, _dval, _vsel) \ + [MP5416_BUCK ## _id] = { \ + .id = MP5416_BUCK ## _id, \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .ops = &mp5416_buck_ops, \ + .min_uV = MP5416_VOLT ##_vsel## _MIN, \ + .uV_step = MP5416_VOLT ##_vsel## _STEP, \ + .n_voltages = MP5416_VOLT ##_vsel## _RANGE, \ + .curr_table = _ilim, \ + .n_current_limits = ARRAY_SIZE(_ilim), \ + .csel_reg = MP5416_REG_ILIM, \ + .csel_mask = MP5416_MASK_BUCK ## _id ##_ILIM, \ + .vsel_reg = MP5416_REG_BUCK ## _id, \ + .vsel_mask = MP5416_MASK_VSET, \ + .enable_reg = MP5416_REG_BUCK ## _id, \ + .enable_mask = MP5416_REGULATOR_EN, \ + .active_discharge_on = _dval, \ + .active_discharge_reg = _dreg, \ + .active_discharge_mask = _dval, \ + .owner = THIS_MODULE, \ + } + +#define MP5416LDO(_name, _id, _dval) \ + [MP5416_LDO ## _id] = { \ + .id = MP5416_LDO ## _id, \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .ops = &mp5416_ldo_ops, \ + .min_uV = MP5416_VOLT2_MIN, \ + .uV_step = MP5416_VOLT2_STEP, \ + .n_voltages = MP5416_VOLT2_RANGE, \ + .vsel_reg = MP5416_REG_LDO ##_id, \ + .vsel_mask = MP5416_MASK_VSET, \ + .enable_reg = MP5416_REG_LDO ##_id, \ + .enable_mask = MP5416_REGULATOR_EN, \ + .active_discharge_on = _dval, \ + .active_discharge_reg = MP5416_REG_CTL2, \ + .active_discharge_mask = _dval, \ + .owner = THIS_MODULE, \ + } + +enum mp5416_regulators { + MP5416_BUCK1, + MP5416_BUCK2, + MP5416_BUCK3, + MP5416_BUCK4, + MP5416_LDO1, + MP5416_LDO2, + MP5416_LDO3, + MP5416_LDO4, + MP5416_MAX_REGULATORS, +}; + +static const struct regmap_config mp5416_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x0d, +}; + +/* Current limits array (in uA) + * ILIM1 & ILIM3 + */ +static const unsigned int mp5416_I_limits1[] = { + 3800000, 4600000, 5600000, 6800000 +}; + +/* ILIM2 & ILIM4 */ +static const unsigned int mp5416_I_limits2[] = { + 2200000, 3200000, 4200000, 5200000 +}; + +static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay); + +static const struct regulator_ops mp5416_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, +}; + +static const struct regulator_ops mp5416_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .set_ramp_delay = mp5416_set_ramp_delay, +}; + +static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = { + MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1), + MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 2), + MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1), + MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 2), + MP5416LDO("ldo1", 1, BIT(4)), + MP5416LDO("ldo2", 2, BIT(3)), + MP5416LDO("ldo3", 3, BIT(2)), + MP5416LDO("ldo4", 4, BIT(1)), +}; + +/* + * DVS ramp rate BUCK1 to BUCK4 + * 00: 32mV/us + * 01: 16mV/us + * 10: 8mV/us + * 11: 4mV/us + */ +static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + unsigned int ramp_val; + + if (ramp_delay > 32000 || ramp_delay < 0) + return -EINVAL; + + if (ramp_delay <= 4000) + ramp_val = 3; + else if (ramp_delay <= 8000) + ramp_val = 2; + else if (ramp_delay <= 16000) + ramp_val = 1; + else + ramp_val = 0; + + return regmap_update_bits(rdev->regmap, MP5416_REG_CTL2, + MP5416_MASK_DVS_SLEWRATE, ramp_val << 6); +} + +static int mp5416_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regulator_config config = { NULL, }; + struct regulator_dev *rdev; + struct regmap *regmap; + int i; + + regmap = devm_regmap_init_i2c(client, &mp5416_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + + config.dev = dev; + config.regmap = regmap; + + for (i = 0; i < MP5416_MAX_REGULATORS; i++) { + rdev = devm_regulator_register(dev, + &mp5416_regulators_desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(dev, "Failed to register regulator!\n"); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct of_device_id mp5416_of_match[] = { + { .compatible = "mps,mp5416" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mp5416_of_match); + +static const struct i2c_device_id mp5416_id[] = { + { "mp5416", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mp5416_id); + +static struct i2c_driver mp5416_regulator_driver = { + .driver = { + .name = "mp5416", + .of_match_table = of_match_ptr(mp5416_of_match), + }, + .probe_new = mp5416_i2c_probe, + .id_table = mp5416_id, +}; +module_i2c_driver(mp5416_regulator_driver); + +MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>"); +MODULE_DESCRIPTION("MP5416 PMIC regulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/mp8859.c b/drivers/regulator/mp8859.c index 1d26b506ee5b..6ed987648188 100644 --- a/drivers/regulator/mp8859.c +++ b/drivers/regulator/mp8859.c @@ -95,6 +95,7 @@ static const struct regulator_desc mp8859_regulators[] = { .id = 0, .type = REGULATOR_VOLTAGE, .name = "mp8859_dcdc", + .supply_name = "vin", .of_match = of_match_ptr("mp8859_dcdc"), .n_voltages = VOL_MAX_IDX + 1, .linear_ranges = mp8859_dcdc_ranges, diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c new file mode 100644 index 000000000000..1786f7162019 --- /dev/null +++ b/drivers/regulator/mp886x.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// MP8867/MP8869 regulator driver +// +// Copyright (C) 2020 Synaptics Incorporated +// +// Author: Jisheng Zhang <jszhang@kernel.org> + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define MP886X_VSEL 0x00 +#define MP886X_V_BOOT (1 << 7) +#define MP886X_SYSCNTLREG1 0x01 +#define MP886X_MODE (1 << 0) +#define MP886X_GO (1 << 6) +#define MP886X_EN (1 << 7) + +struct mp886x_device_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_init_data *regulator; + struct gpio_desc *en_gpio; + u32 r[2]; + unsigned int sel; +}; + +static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_MODE, MP886X_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int mp886x_get_mode(struct regulator_dev *rdev) +{ + u32 val; + int ret; + + ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val); + if (ret < 0) + return ret; + if (val & MP886X_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) +{ + int ret; + + ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_GO, MP886X_GO); + if (ret < 0) + return ret; + + sel <<= ffs(rdev->desc->vsel_mask) - 1; + return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + MP886X_V_BOOT | rdev->desc->vsel_mask, sel); +} + +static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2) +{ + u32 tmp = uv * r1 / r2; + + return uv + tmp; +} + +static int mp8869_get_voltage_sel(struct regulator_dev *rdev) +{ + struct mp886x_device_info *di = rdev_get_drvdata(rdev); + int ret, uv; + unsigned int val; + bool fbloop; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); + if (ret) + return ret; + + fbloop = val & MP886X_V_BOOT; + if (fbloop) { + uv = rdev->desc->min_uV; + uv = mp8869_scale(uv, di->r[0], di->r[1]); + return regulator_map_voltage_linear(rdev, uv, uv); + } + + val &= rdev->desc->vsel_mask; + val >>= ffs(rdev->desc->vsel_mask) - 1; + + return val; +} + +static const struct regulator_ops mp8869_regulator_ops = { + .set_voltage_sel = mp8869_set_voltage_sel, + .get_voltage_sel = mp8869_get_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = mp886x_set_mode, + .get_mode = mp886x_get_mode, +}; + +static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) +{ + struct mp886x_device_info *di = rdev_get_drvdata(rdev); + int ret, delta; + + ret = mp8869_set_voltage_sel(rdev, sel); + if (ret < 0) + return ret; + + delta = di->sel - sel; + if (abs(delta) <= 5) + ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_GO, 0); + di->sel = sel; + + return ret; +} + +static int mp8867_get_voltage_sel(struct regulator_dev *rdev) +{ + struct mp886x_device_info *di = rdev_get_drvdata(rdev); + int ret, uv; + unsigned int val; + bool fbloop; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); + if (ret) + return ret; + + fbloop = val & MP886X_V_BOOT; + + val &= rdev->desc->vsel_mask; + val >>= ffs(rdev->desc->vsel_mask) - 1; + + if (fbloop) { + uv = regulator_list_voltage_linear(rdev, val); + uv = mp8869_scale(uv, di->r[0], di->r[1]); + return regulator_map_voltage_linear(rdev, uv, uv); + } + + return val; +} + +static const struct regulator_ops mp8867_regulator_ops = { + .set_voltage_sel = mp8867_set_voltage_sel, + .get_voltage_sel = mp8867_get_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = mp886x_set_mode, + .get_mode = mp886x_get_mode, +}; + +static int mp886x_regulator_register(struct mp886x_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + struct regulator_dev *rdev; + + rdesc->name = "mp886x-reg"; + rdesc->supply_name = "vin"; + rdesc->ops = of_device_get_match_data(di->dev); + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = 128; + rdesc->enable_reg = MP886X_SYSCNTLREG1; + rdesc->enable_mask = MP886X_EN; + rdesc->min_uV = 600000; + rdesc->uV_step = 10000; + rdesc->vsel_reg = MP886X_VSEL; + rdesc->vsel_mask = 0x3f; + rdesc->owner = THIS_MODULE; + + rdev = devm_regulator_register(di->dev, &di->desc, config); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + di->sel = rdesc->ops->get_voltage_sel(rdev); + return 0; +} + +static const struct regmap_config mp886x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int mp886x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct mp886x_device_info *di; + struct regulator_config config = { }; + struct regmap *regmap; + int ret; + + di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL); + if (!di) + return -ENOMEM; + + di->regulator = of_get_regulator_init_data(dev, np, &di->desc); + if (!di->regulator) { + dev_err(dev, "Platform data not found!\n"); + return -EINVAL; + } + + ret = of_property_read_u32_array(np, "mps,fb-voltage-divider", + di->r, 2); + if (ret) + return ret; + + di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(di->en_gpio)) + return PTR_ERR(di->en_gpio); + + di->dev = dev; + + regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + i2c_set_clientdata(client, di); + + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = regmap; + config.driver_data = di; + config.of_node = np; + + ret = mp886x_regulator_register(di, &config); + if (ret < 0) + dev_err(dev, "Failed to register regulator!\n"); + return ret; +} + +static const struct of_device_id mp886x_dt_ids[] = { + { + .compatible = "mps,mp8867", + .data = &mp8867_regulator_ops + }, + { + .compatible = "mps,mp8869", + .data = &mp8869_regulator_ops + }, + { } +}; +MODULE_DEVICE_TABLE(of, mp886x_dt_ids); + +static const struct i2c_device_id mp886x_id[] = { + { "mp886x", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mp886x_id); + +static struct i2c_driver mp886x_regulator_driver = { + .driver = { + .name = "mp886x-regulator", + .of_match_table = of_match_ptr(mp886x_dt_ids), + }, + .probe = mp886x_i2c_probe, + .id_table = mp886x_id, +}; +module_i2c_driver(mp886x_regulator_driver); + +MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); +MODULE_DESCRIPTION("MP886x regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index e74e11101fc1..638329bd0745 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -354,7 +354,11 @@ static int pwm_regulator_probe(struct platform_device *pdev) drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); if (IS_ERR(drvdata->pwm)) { ret = PTR_ERR(drvdata->pwm); - dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret); + if (ret == -EPROBE_DEFER) + dev_dbg(&pdev->dev, + "Failed to get PWM, deferring probe\n"); + else + dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret); return ret; } diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 7407cd5a1b74..7fc97f23fcf4 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = { { } }; +static const struct rpm_regulator_data rpm_smb208_regulators[] = { + { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, + { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, + { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, + { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, + { } +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8018-regulators", .data = &rpm_pm8018_regulators }, { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, + { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, { } }; MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index fff8d5fdef6a..fdde4195cefb 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -445,6 +445,44 @@ static const struct regulator_desc pm8994_lnldo = { .ops = &rpm_smps_ldo_ops_fixed, }; +static const struct regulator_desc pmi8994_ftsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000), + REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000), + }, + .n_linear_ranges = 2, + .n_voltages = 350, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pmi8994_hfsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(350000, 0, 80, 12500), + REGULATOR_LINEAR_RANGE(700000, 81, 141, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 142, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pmi8994_bby = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(3000000, 0, 44, 50000), + }, + .n_linear_ranges = 1, + .n_voltages = 45, + .ops = &rpm_bob_ops, +}; + +static const struct regulator_desc pmi8994_boost = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), + }, + .n_linear_ranges = 1, + .n_voltages = 31, + .ops = &rpm_smps_ldo_ops, +}; + static const struct regulator_desc pm8998_ftsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), @@ -780,6 +818,14 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pmi8994_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" }, + { "s2", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" }, + { "boost-bypass", QCOM_SMD_RPM_BBYB, 1, &pmi8994_bby, "vdd_bst_byp" }, + {} +}; + static const struct rpm_regulator_data rpm_pm8998_regulators[] = { { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" }, @@ -862,6 +908,7 @@ static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators }, { .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators }, { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, + { .compatible = "qcom,rpm-pmi8994-regulators", .data = &rpm_pmi8994_regulators }, { .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators }, { .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators }, {} diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d6ed0c355954..efce98e9844e 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -62,6 +62,13 @@ config SPI_ALTERA help This is the driver for the Altera SPI Controller. +config SPI_AR934X + tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver" + depends on ATH79 || COMPILE_TEST + help + This enables support for the SPI controller present on the + Qualcomm Atheros AR934X/QCA95XX SoCs. + config SPI_ATH79 tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" depends on ATH79 || COMPILE_TEST @@ -264,6 +271,13 @@ config SPI_FALCON has only been tested with m25p80 type chips. The hardware has no support for other types of SPI peripherals. +config SPI_FSI + tristate "FSI SPI driver" + depends on FSI + help + This enables support for the driver for FSI bus attached SPI + controllers. + config SPI_FSL_LPSPI tristate "Freescale i.MX LPSPI controller" depends on ARCH_MXC || COMPILE_TEST @@ -285,7 +299,6 @@ config SPI_HISI_SFC_V3XX tristate "HiSilicon SPI-NOR Flash Controller for Hi16XX chipsets" depends on (ARM64 && ACPI) || COMPILE_TEST depends on HAS_IOMEM - select CONFIG_MTD_SPI_NOR help This enables support for HiSilicon v3xx SPI-NOR flash controller found in hi16xx chipsets. @@ -415,6 +428,7 @@ config SPI_FSL_ESPI config SPI_MESON_SPICC tristate "Amlogic Meson SPICC controller" + depends on COMMON_CLK depends on ARCH_MESON || COMPILE_TEST help This enables master mode support for the SPICC (SPI communication @@ -443,6 +457,16 @@ config SPI_MT7621 help This selects a driver for the MediaTek MT7621 SPI Controller. +config SPI_MTK_NOR + tristate "MediaTek SPI NOR controller" + depends on ARCH_MEDIATEK || COMPILE_TEST + help + This enables support for SPI NOR controller found on MediaTek + ARM SoCs. This is a controller specifically for SPI-NOR flash. + It can perform generic SPI transfers up to 6 bytes via generic + SPI interface as well as several SPI-NOR specific instructions + via SPI MEM interface. + config SPI_NPCM_FIU tristate "Nuvoton NPCM FLASH Interface Unit" depends on ARCH_NPCM || COMPILE_TEST @@ -890,6 +914,17 @@ config SPI_ZYNQMP_GQSPI # Add new SPI master controllers in alphabetical order above this line # +comment "SPI Multiplexer support" + +config SPI_MUX + tristate "SPI multiplexer support" + select MULTIPLEXER + help + This adds support for SPI multiplexers. Each SPI mux will be + accessible as a SPI controller, the devices behind the mux will appear + to be chip selects on this controller. It is still necessary to + select one or more specific mux-controller drivers. + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 9b65ec5afc5e..28f601327f8c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -9,11 +9,13 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # config declarations into driver model code obj-$(CONFIG_SPI_MASTER) += spi.o obj-$(CONFIG_SPI_MEM) += spi-mem.o +obj-$(CONFIG_SPI_MUX) += spi-mux.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o # SPI master controller drivers (bus) obj-$(CONFIG_SPI_ALTERA) += spi-altera.o +obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o @@ -40,6 +42,7 @@ spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o obj-$(CONFIG_SPI_EFM32) += spi-efm32.o obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o obj-$(CONFIG_SPI_FALCON) += spi-falcon.o +obj-$(CONFIG_SPI_FSI) += spi-fsi.o obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o obj-$(CONFIG_SPI_FSL_DSPI) += spi-fsl-dspi.o obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o @@ -62,6 +65,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o +obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 13def7f78b9e..cb44d1e169aa 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -173,6 +173,81 @@ static const struct atmel_qspi_mode atmel_qspi_modes[] = { { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, }; +#ifdef VERBOSE_DEBUG +static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) +{ + switch (offset) { + case QSPI_CR: + return "CR"; + case QSPI_MR: + return "MR"; + case QSPI_RD: + return "MR"; + case QSPI_TD: + return "TD"; + case QSPI_SR: + return "SR"; + case QSPI_IER: + return "IER"; + case QSPI_IDR: + return "IDR"; + case QSPI_IMR: + return "IMR"; + case QSPI_SCR: + return "SCR"; + case QSPI_IAR: + return "IAR"; + case QSPI_ICR: + return "ICR/WICR"; + case QSPI_IFR: + return "IFR"; + case QSPI_RICR: + return "RICR"; + case QSPI_SMR: + return "SMR"; + case QSPI_SKR: + return "SKR"; + case QSPI_WPMR: + return "WPMR"; + case QSPI_WPSR: + return "WPSR"; + case QSPI_VERSION: + return "VERSION"; + default: + snprintf(tmp, sz, "0x%02x", offset); + break; + } + + return tmp; +} +#endif /* VERBOSE_DEBUG */ + +static u32 atmel_qspi_read(struct atmel_qspi *aq, u32 offset) +{ + u32 value = readl_relaxed(aq->regs + offset); + +#ifdef VERBOSE_DEBUG + char tmp[8]; + + dev_vdbg(&aq->pdev->dev, "read 0x%08x from %s\n", value, + atmel_qspi_reg_name(offset, tmp, sizeof(tmp))); +#endif /* VERBOSE_DEBUG */ + + return value; +} + +static void atmel_qspi_write(u32 value, struct atmel_qspi *aq, u32 offset) +{ +#ifdef VERBOSE_DEBUG + char tmp[8]; + + dev_vdbg(&aq->pdev->dev, "write 0x%08x into %s\n", value, + atmel_qspi_reg_name(offset, tmp, sizeof(tmp))); +#endif /* VERBOSE_DEBUG */ + + writel_relaxed(value, aq->regs + offset); +} + static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op, const struct atmel_qspi_mode *mode) { @@ -293,32 +368,32 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq, * Serial Memory Mode (SMM). */ if (aq->mr != QSPI_MR_SMM) { - writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); + atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); aq->mr = QSPI_MR_SMM; } /* Clear pending interrupts */ - (void)readl_relaxed(aq->regs + QSPI_SR); + (void)atmel_qspi_read(aq, QSPI_SR); if (aq->caps->has_ricr) { if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN) ifr |= QSPI_IFR_APBTFRTYP_READ; /* Set QSPI Instruction Frame registers */ - writel_relaxed(iar, aq->regs + QSPI_IAR); + atmel_qspi_write(iar, aq, QSPI_IAR); if (op->data.dir == SPI_MEM_DATA_IN) - writel_relaxed(icr, aq->regs + QSPI_RICR); + atmel_qspi_write(icr, aq, QSPI_RICR); else - writel_relaxed(icr, aq->regs + QSPI_WICR); - writel_relaxed(ifr, aq->regs + QSPI_IFR); + atmel_qspi_write(icr, aq, QSPI_WICR); + atmel_qspi_write(ifr, aq, QSPI_IFR); } else { if (op->data.dir == SPI_MEM_DATA_OUT) ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; /* Set QSPI Instruction Frame registers */ - writel_relaxed(iar, aq->regs + QSPI_IAR); - writel_relaxed(icr, aq->regs + QSPI_ICR); - writel_relaxed(ifr, aq->regs + QSPI_IFR); + atmel_qspi_write(iar, aq, QSPI_IAR); + atmel_qspi_write(icr, aq, QSPI_ICR); + atmel_qspi_write(ifr, aq, QSPI_IFR); } return 0; @@ -345,7 +420,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) /* Skip to the final steps if there is no data */ if (op->data.nbytes) { /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ - (void)readl_relaxed(aq->regs + QSPI_IFR); + (void)atmel_qspi_read(aq, QSPI_IFR); /* Send/Receive data */ if (op->data.dir == SPI_MEM_DATA_IN) @@ -356,22 +431,22 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) op->data.nbytes); /* Release the chip-select */ - writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR); + atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR); } /* Poll INSTRuction End status */ - sr = readl_relaxed(aq->regs + QSPI_SR); + sr = atmel_qspi_read(aq, QSPI_SR); if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED) return err; /* Wait for INSTRuction End interrupt */ reinit_completion(&aq->cmd_completion); aq->pending = sr & QSPI_SR_CMD_COMPLETED; - writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IER); + atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IER); if (!wait_for_completion_timeout(&aq->cmd_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; - writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IDR); + atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IDR); return err; } @@ -410,7 +485,7 @@ static int atmel_qspi_setup(struct spi_device *spi) scbr--; aq->scr = QSPI_SCR_SCBR(scbr); - writel_relaxed(aq->scr, aq->regs + QSPI_SCR); + atmel_qspi_write(aq->scr, aq, QSPI_SCR); return 0; } @@ -418,14 +493,14 @@ static int atmel_qspi_setup(struct spi_device *spi) static void atmel_qspi_init(struct atmel_qspi *aq) { /* Reset the QSPI controller */ - writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR); + atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); /* Set the QSPI controller by default in Serial Memory Mode */ - writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); + atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); aq->mr = QSPI_MR_SMM; /* Enable the QSPI controller */ - writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR); + atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); } static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) @@ -433,8 +508,8 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) struct atmel_qspi *aq = dev_id; u32 status, mask, pending; - status = readl_relaxed(aq->regs + QSPI_SR); - mask = readl_relaxed(aq->regs + QSPI_IMR); + status = atmel_qspi_read(aq, QSPI_SR); + mask = atmel_qspi_read(aq, QSPI_IMR); pending = status & mask; if (!pending) @@ -569,7 +644,7 @@ static int atmel_qspi_remove(struct platform_device *pdev) struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); spi_unregister_controller(ctrl); - writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR); + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); clk_disable_unprepare(aq->qspick); clk_disable_unprepare(aq->pclk); return 0; @@ -596,7 +671,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev) atmel_qspi_init(aq); - writel_relaxed(aq->scr, aq->regs + QSPI_SCR); + atmel_qspi_write(aq->scr, aq, QSPI_SCR); return 0; } diff --git a/drivers/spi/spi-ar934x.c b/drivers/spi/spi-ar934x.c new file mode 100644 index 000000000000..d08dec09d423 --- /dev/null +++ b/drivers/spi/spi-ar934x.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// SPI controller driver for Qualcomm Atheros AR934x/QCA95xx SoCs +// +// Copyright (C) 2020 Chuanhong Guo <gch981213@gmail.com> +// +// Based on spi-mt7621.c: +// Copyright (C) 2011 Sergiy <piratfm@gmail.com> +// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> +// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name> + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spi/spi.h> + +#define DRIVER_NAME "spi-ar934x" + +#define AR934X_SPI_REG_FS 0x00 +#define AR934X_SPI_ENABLE BIT(0) + +#define AR934X_SPI_REG_IOC 0x08 +#define AR934X_SPI_IOC_INITVAL 0x70000 + +#define AR934X_SPI_REG_CTRL 0x04 +#define AR934X_SPI_CLK_MASK GENMASK(5, 0) + +#define AR934X_SPI_DATAOUT 0x10 + +#define AR934X_SPI_REG_SHIFT_CTRL 0x14 +#define AR934X_SPI_SHIFT_EN BIT(31) +#define AR934X_SPI_SHIFT_CS(n) BIT(28 + (n)) +#define AR934X_SPI_SHIFT_TERM 26 +#define AR934X_SPI_SHIFT_VAL(cs, term, count) \ + (AR934X_SPI_SHIFT_EN | AR934X_SPI_SHIFT_CS(cs) | \ + (term) << AR934X_SPI_SHIFT_TERM | (count)) + +#define AR934X_SPI_DATAIN 0x18 + +struct ar934x_spi { + struct spi_controller *ctlr; + void __iomem *base; + struct clk *clk; + unsigned int clk_freq; +}; + +static inline int ar934x_spi_clk_div(struct ar934x_spi *sp, unsigned int freq) +{ + int div = DIV_ROUND_UP(sp->clk_freq, freq * 2) - 1; + + if (div < 0) + return 0; + else if (div > AR934X_SPI_CLK_MASK) + return -EINVAL; + else + return div; +} + +static int ar934x_spi_setup(struct spi_device *spi) +{ + struct ar934x_spi *sp = spi_controller_get_devdata(spi->master); + + if ((spi->max_speed_hz == 0) || + (spi->max_speed_hz > (sp->clk_freq / 2))) { + spi->max_speed_hz = sp->clk_freq / 2; + } else if (spi->max_speed_hz < (sp->clk_freq / 128)) { + dev_err(&spi->dev, "spi clock is too low\n"); + return -EINVAL; + } + + return 0; +} + +static int ar934x_spi_transfer_one_message(struct spi_controller *master, + struct spi_message *m) +{ + struct ar934x_spi *sp = spi_controller_get_devdata(master); + struct spi_transfer *t = NULL; + struct spi_device *spi = m->spi; + unsigned long trx_done, trx_cur; + int stat = 0; + u8 term = 0; + int div, i; + u32 reg; + const u8 *tx_buf; + u8 *buf; + + m->actual_length = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->speed_hz) + div = ar934x_spi_clk_div(sp, t->speed_hz); + else + div = ar934x_spi_clk_div(sp, spi->max_speed_hz); + if (div < 0) { + stat = -EIO; + goto msg_done; + } + + reg = ioread32(sp->base + AR934X_SPI_REG_CTRL); + reg &= ~AR934X_SPI_CLK_MASK; + reg |= div; + iowrite32(reg, sp->base + AR934X_SPI_REG_CTRL); + iowrite32(0, sp->base + AR934X_SPI_DATAOUT); + + for (trx_done = 0; trx_done < t->len; trx_done += 4) { + trx_cur = t->len - trx_done; + if (trx_cur > 4) + trx_cur = 4; + else if (list_is_last(&t->transfer_list, &m->transfers)) + term = 1; + + if (t->tx_buf) { + tx_buf = t->tx_buf + trx_done; + reg = tx_buf[0]; + for (i = 1; i < trx_cur; i++) + reg = reg << 8 | tx_buf[i]; + iowrite32(reg, sp->base + AR934X_SPI_DATAOUT); + } + + reg = AR934X_SPI_SHIFT_VAL(spi->chip_select, term, + trx_cur * 8); + iowrite32(reg, sp->base + AR934X_SPI_REG_SHIFT_CTRL); + stat = readl_poll_timeout( + sp->base + AR934X_SPI_REG_SHIFT_CTRL, reg, + !(reg & AR934X_SPI_SHIFT_EN), 0, 5); + if (stat < 0) + goto msg_done; + + if (t->rx_buf) { + reg = ioread32(sp->base + AR934X_SPI_DATAIN); + buf = t->rx_buf + trx_done; + for (i = 0; i < trx_cur; i++) { + buf[trx_cur - i - 1] = reg & 0xff; + reg >>= 8; + } + } + } + m->actual_length += t->len; + } + +msg_done: + m->status = stat; + spi_finalize_current_message(master); + + return 0; +} + +static const struct of_device_id ar934x_spi_match[] = { + { .compatible = "qca,ar934x-spi" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ar934x_spi_match); + +static int ar934x_spi_probe(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct ar934x_spi *sp; + void __iomem *base; + struct clk *clk; + int ret; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ctlr = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (!ctlr) { + dev_info(&pdev->dev, "failed to allocate spi controller\n"); + return -ENOMEM; + } + + /* disable flash mapping and expose spi controller registers */ + iowrite32(AR934X_SPI_ENABLE, base + AR934X_SPI_REG_FS); + /* restore pins to default state: CSn=1 DO=CLK=0 */ + iowrite32(AR934X_SPI_IOC_INITVAL, base + AR934X_SPI_REG_IOC); + + ctlr->mode_bits = SPI_LSB_FIRST; + ctlr->setup = ar934x_spi_setup; + ctlr->transfer_one_message = ar934x_spi_transfer_one_message; + ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + ctlr->dev.of_node = pdev->dev.of_node; + ctlr->num_chipselect = 3; + + dev_set_drvdata(&pdev->dev, ctlr); + + sp = spi_controller_get_devdata(ctlr); + sp->base = base; + sp->clk = clk; + sp->clk_freq = clk_get_rate(clk); + sp->ctlr = ctlr; + + return devm_spi_register_controller(&pdev->dev, ctlr); +} + +static int ar934x_spi_remove(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct ar934x_spi *sp; + + ctlr = dev_get_drvdata(&pdev->dev); + sp = spi_controller_get_devdata(ctlr); + + clk_disable_unprepare(sp->clk); + + return 0; +} + +static struct platform_driver ar934x_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = ar934x_spi_match, + }, + .probe = ar934x_spi_probe, + .remove = ar934x_spi_remove, +}; + +module_platform_driver(ar934x_spi_driver); + +MODULE_DESCRIPTION("SPI controller driver for Qualcomm Atheros AR934x/QCA95xx"); +MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/spi-efm32.c b/drivers/spi/spi-efm32.c index 64d4c441b641..ea6e4a7b3feb 100644 --- a/drivers/spi/spi-efm32.c +++ b/drivers/spi/spi-efm32.c @@ -6,14 +6,13 @@ #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/platform_data/efm32-spi.h> +#include <linux/of.h> #define DRIVER_NAME "efm32-spi" @@ -82,9 +81,6 @@ struct efm32_spi_ddata { const u8 *tx_buf; u8 *rx_buf; unsigned tx_len, rx_len; - - /* chip selects */ - unsigned csgpio[]; }; #define ddata_to_dev(ddata) (&(ddata->bitbang.master->dev)) @@ -102,14 +98,6 @@ static u32 efm32_spi_read32(struct efm32_spi_ddata *ddata, unsigned offset) return readl_relaxed(ddata->base + offset); } -static void efm32_spi_chipselect(struct spi_device *spi, int is_on) -{ - struct efm32_spi_ddata *ddata = spi_master_get_devdata(spi->master); - int value = !(spi->mode & SPI_CS_HIGH) == !(is_on == BITBANG_CS_ACTIVE); - - gpio_set_value(ddata->csgpio[spi->chip_select], value); -} - static int efm32_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { @@ -320,17 +308,11 @@ static int efm32_spi_probe(struct platform_device *pdev) int ret; struct spi_master *master; struct device_node *np = pdev->dev.of_node; - int num_cs, i; if (!np) return -EINVAL; - num_cs = of_gpio_named_count(np, "cs-gpios"); - if (num_cs < 0) - return num_cs; - - master = spi_alloc_master(&pdev->dev, - sizeof(*ddata) + num_cs * sizeof(unsigned)); + master = spi_alloc_master(&pdev->dev, sizeof(*ddata)); if (!master) { dev_dbg(&pdev->dev, "failed to allocate spi master controller\n"); @@ -340,14 +322,13 @@ static int efm32_spi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; - master->num_chipselect = num_cs; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); + master->use_gpio_descriptors = true; ddata = spi_master_get_devdata(master); ddata->bitbang.master = master; - ddata->bitbang.chipselect = efm32_spi_chipselect; ddata->bitbang.setup_transfer = efm32_spi_setup_transfer; ddata->bitbang.txrx_bufs = efm32_spi_txrx_bufs; @@ -361,25 +342,6 @@ static int efm32_spi_probe(struct platform_device *pdev) goto err; } - for (i = 0; i < num_cs; ++i) { - ret = of_get_named_gpio(np, "cs-gpios", i); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get csgpio#%u (%d)\n", - i, ret); - goto err; - } - ddata->csgpio[i] = ret; - dev_dbg(&pdev->dev, "csgpio#%u = %u\n", i, ddata->csgpio[i]); - ret = devm_gpio_request_one(&pdev->dev, ddata->csgpio[i], - GPIOF_OUT_INIT_LOW, DRIVER_NAME); - if (ret < 0) { - dev_err(&pdev->dev, - "failed to configure csgpio#%u (%d)\n", - i, ret); - goto err; - } - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c new file mode 100644 index 000000000000..37a3e0f8e752 --- /dev/null +++ b/drivers/spi/spi-fsi.c @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (C) IBM Corporation 2020 + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/fsi.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/spi/spi.h> + +#define FSI_ENGID_SPI 0x23 +#define FSI_MBOX_ROOT_CTRL_8 0x2860 + +#define FSI2SPI_DATA0 0x00 +#define FSI2SPI_DATA1 0x04 +#define FSI2SPI_CMD 0x08 +#define FSI2SPI_CMD_WRITE BIT(31) +#define FSI2SPI_RESET 0x18 +#define FSI2SPI_STATUS 0x1c +#define FSI2SPI_STATUS_ANY_ERROR BIT(31) +#define FSI2SPI_IRQ 0x20 + +#define SPI_FSI_BASE 0x70000 +#define SPI_FSI_INIT_TIMEOUT_MS 1000 +#define SPI_FSI_MAX_TRANSFER_SIZE 2048 + +#define SPI_FSI_ERROR 0x0 +#define SPI_FSI_COUNTER_CFG 0x1 +#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32) +#define SPI_FSI_CFG1 0x2 +#define SPI_FSI_CLOCK_CFG 0x3 +#define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32) +#define SPI_FSI_CLOCK_CFG_ECC_DISABLE (BIT_ULL(35) | BIT_ULL(33)) +#define SPI_FSI_CLOCK_CFG_RESET1 (BIT_ULL(36) | BIT_ULL(38)) +#define SPI_FSI_CLOCK_CFG_RESET2 (BIT_ULL(37) | BIT_ULL(39)) +#define SPI_FSI_CLOCK_CFG_MODE (BIT_ULL(41) | BIT_ULL(42)) +#define SPI_FSI_CLOCK_CFG_SCK_RECV_DEL GENMASK_ULL(51, 44) +#define SPI_FSI_CLOCK_CFG_SCK_NO_DEL BIT_ULL(51) +#define SPI_FSI_CLOCK_CFG_SCK_DIV GENMASK_ULL(63, 52) +#define SPI_FSI_MMAP 0x4 +#define SPI_FSI_DATA_TX 0x5 +#define SPI_FSI_DATA_RX 0x6 +#define SPI_FSI_SEQUENCE 0x7 +#define SPI_FSI_SEQUENCE_STOP 0x00 +#define SPI_FSI_SEQUENCE_SEL_SLAVE(x) (0x10 | ((x) & 0xf)) +#define SPI_FSI_SEQUENCE_SHIFT_OUT(x) (0x30 | ((x) & 0xf)) +#define SPI_FSI_SEQUENCE_SHIFT_IN(x) (0x40 | ((x) & 0xf)) +#define SPI_FSI_SEQUENCE_COPY_DATA_TX 0xc0 +#define SPI_FSI_SEQUENCE_BRANCH(x) (0xe0 | ((x) & 0xf)) +#define SPI_FSI_STATUS 0x8 +#define SPI_FSI_STATUS_ERROR \ + (GENMASK_ULL(31, 21) | GENMASK_ULL(15, 12)) +#define SPI_FSI_STATUS_SEQ_STATE GENMASK_ULL(55, 48) +#define SPI_FSI_STATUS_SEQ_STATE_IDLE BIT_ULL(48) +#define SPI_FSI_STATUS_TDR_UNDERRUN BIT_ULL(57) +#define SPI_FSI_STATUS_TDR_OVERRUN BIT_ULL(58) +#define SPI_FSI_STATUS_TDR_FULL BIT_ULL(59) +#define SPI_FSI_STATUS_RDR_UNDERRUN BIT_ULL(61) +#define SPI_FSI_STATUS_RDR_OVERRUN BIT_ULL(62) +#define SPI_FSI_STATUS_RDR_FULL BIT_ULL(63) +#define SPI_FSI_STATUS_ANY_ERROR \ + (SPI_FSI_STATUS_ERROR | SPI_FSI_STATUS_TDR_UNDERRUN | \ + SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \ + SPI_FSI_STATUS_RDR_OVERRUN) +#define SPI_FSI_PORT_CTRL 0x9 + +struct fsi_spi { + struct device *dev; /* SPI controller device */ + struct fsi_device *fsi; /* FSI2SPI CFAM engine device */ + u32 base; +}; + +struct fsi_spi_sequence { + int bit; + u64 data; +}; + +static int fsi_spi_check_status(struct fsi_spi *ctx) +{ + int rc; + u32 sts; + __be32 sts_be; + + rc = fsi_device_read(ctx->fsi, FSI2SPI_STATUS, &sts_be, + sizeof(sts_be)); + if (rc) + return rc; + + sts = be32_to_cpu(sts_be); + if (sts & FSI2SPI_STATUS_ANY_ERROR) { + dev_err(ctx->dev, "Error with FSI2SPI interface: %08x.\n", sts); + return -EIO; + } + + return 0; +} + +static int fsi_spi_read_reg(struct fsi_spi *ctx, u32 offset, u64 *value) +{ + int rc; + __be32 cmd_be; + __be32 data_be; + u32 cmd = offset + ctx->base; + + *value = 0ULL; + + if (cmd & FSI2SPI_CMD_WRITE) + return -EINVAL; + + cmd_be = cpu_to_be32(cmd); + rc = fsi_device_write(ctx->fsi, FSI2SPI_CMD, &cmd_be, sizeof(cmd_be)); + if (rc) + return rc; + + rc = fsi_spi_check_status(ctx); + if (rc) + return rc; + + rc = fsi_device_read(ctx->fsi, FSI2SPI_DATA0, &data_be, + sizeof(data_be)); + if (rc) + return rc; + + *value |= (u64)be32_to_cpu(data_be) << 32; + + rc = fsi_device_read(ctx->fsi, FSI2SPI_DATA1, &data_be, + sizeof(data_be)); + if (rc) + return rc; + + *value |= (u64)be32_to_cpu(data_be); + dev_dbg(ctx->dev, "Read %02x[%016llx].\n", offset, *value); + + return 0; +} + +static int fsi_spi_write_reg(struct fsi_spi *ctx, u32 offset, u64 value) +{ + int rc; + __be32 cmd_be; + __be32 data_be; + u32 cmd = offset + ctx->base; + + if (cmd & FSI2SPI_CMD_WRITE) + return -EINVAL; + + dev_dbg(ctx->dev, "Write %02x[%016llx].\n", offset, value); + + data_be = cpu_to_be32(upper_32_bits(value)); + rc = fsi_device_write(ctx->fsi, FSI2SPI_DATA0, &data_be, + sizeof(data_be)); + if (rc) + return rc; + + data_be = cpu_to_be32(lower_32_bits(value)); + rc = fsi_device_write(ctx->fsi, FSI2SPI_DATA1, &data_be, + sizeof(data_be)); + if (rc) + return rc; + + cmd_be = cpu_to_be32(cmd | FSI2SPI_CMD_WRITE); + rc = fsi_device_write(ctx->fsi, FSI2SPI_CMD, &cmd_be, sizeof(cmd_be)); + if (rc) + return rc; + + return fsi_spi_check_status(ctx); +} + +static int fsi_spi_data_in(u64 in, u8 *rx, int len) +{ + int i; + int num_bytes = min(len, 8); + + for (i = 0; i < num_bytes; ++i) + rx[i] = (u8)(in >> (8 * ((num_bytes - 1) - i))); + + return num_bytes; +} + +static int fsi_spi_data_out(u64 *out, const u8 *tx, int len) +{ + int i; + int num_bytes = min(len, 8); + u8 *out_bytes = (u8 *)out; + + /* Unused bytes of the tx data should be 0. */ + *out = 0ULL; + + for (i = 0; i < num_bytes; ++i) + out_bytes[8 - (i + 1)] = tx[i]; + + return num_bytes; +} + +static int fsi_spi_reset(struct fsi_spi *ctx) +{ + int rc; + + dev_dbg(ctx->dev, "Resetting SPI controller.\n"); + + rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, + SPI_FSI_CLOCK_CFG_RESET1); + if (rc) + return rc; + + return fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, + SPI_FSI_CLOCK_CFG_RESET2); +} + +static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val) +{ + /* + * Add the next byte of instruction to the 8-byte sequence register. + * Then decrement the counter so that the next instruction will go in + * the right place. Return the number of "slots" left in the sequence + * register. + */ + seq->data |= (u64)val << seq->bit; + seq->bit -= 8; + + return ((64 - seq->bit) / 8) - 2; +} + +static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq) +{ + seq->bit = 56; + seq->data = 0ULL; +} + +static int fsi_spi_sequence_transfer(struct fsi_spi *ctx, + struct fsi_spi_sequence *seq, + struct spi_transfer *transfer) +{ + int loops; + int idx; + int rc; + u8 len = min(transfer->len, 8U); + u8 rem = transfer->len % len; + + loops = transfer->len / len; + + if (transfer->tx_buf) { + idx = fsi_spi_sequence_add(seq, + SPI_FSI_SEQUENCE_SHIFT_OUT(len)); + if (rem) + rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem); + } else if (transfer->rx_buf) { + idx = fsi_spi_sequence_add(seq, + SPI_FSI_SEQUENCE_SHIFT_IN(len)); + if (rem) + rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem); + } else { + return -EINVAL; + } + + if (loops > 1) { + fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx)); + + if (rem) + fsi_spi_sequence_add(seq, rem); + + rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, + SPI_FSI_COUNTER_CFG_LOOPS(loops - 1)); + if (rc) + return rc; + } + + return 0; +} + +static int fsi_spi_transfer_data(struct fsi_spi *ctx, + struct spi_transfer *transfer) +{ + int rc = 0; + u64 status = 0ULL; + + if (transfer->tx_buf) { + int nb; + int sent = 0; + u64 out = 0ULL; + const u8 *tx = transfer->tx_buf; + + while (transfer->len > sent) { + nb = fsi_spi_data_out(&out, &tx[sent], + (int)transfer->len - sent); + + rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, out); + if (rc) + return rc; + + do { + rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, + &status); + if (rc) + return rc; + + if (status & SPI_FSI_STATUS_ANY_ERROR) { + rc = fsi_spi_reset(ctx); + if (rc) + return rc; + + return -EREMOTEIO; + } + } while (status & SPI_FSI_STATUS_TDR_FULL); + + sent += nb; + } + } else if (transfer->rx_buf) { + int recv = 0; + u64 in = 0ULL; + u8 *rx = transfer->rx_buf; + + while (transfer->len > recv) { + do { + rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, + &status); + if (rc) + return rc; + + if (status & SPI_FSI_STATUS_ANY_ERROR) { + rc = fsi_spi_reset(ctx); + if (rc) + return rc; + + return -EREMOTEIO; + } + } while (!(status & SPI_FSI_STATUS_RDR_FULL)); + + rc = fsi_spi_read_reg(ctx, SPI_FSI_DATA_RX, &in); + if (rc) + return rc; + + recv += fsi_spi_data_in(in, &rx[recv], + (int)transfer->len - recv); + } + } + + return 0; +} + +static int fsi_spi_transfer_init(struct fsi_spi *ctx) +{ + int rc; + bool reset = false; + unsigned long end; + u64 seq_state; + u64 clock_cfg = 0ULL; + u64 status = 0ULL; + u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE | + SPI_FSI_CLOCK_CFG_SCK_NO_DEL | + FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 4); + + end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS); + do { + if (time_after(jiffies, end)) + return -ETIMEDOUT; + + rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, &status); + if (rc) + return rc; + + seq_state = status & SPI_FSI_STATUS_SEQ_STATE; + + if (status & (SPI_FSI_STATUS_ANY_ERROR | + SPI_FSI_STATUS_TDR_FULL | + SPI_FSI_STATUS_RDR_FULL)) { + if (reset) + return -EIO; + + rc = fsi_spi_reset(ctx); + if (rc) + return rc; + + reset = true; + continue; + } + } while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE)); + + rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg); + if (rc) + return rc; + + if ((clock_cfg & (SPI_FSI_CLOCK_CFG_MM_ENABLE | + SPI_FSI_CLOCK_CFG_ECC_DISABLE | + SPI_FSI_CLOCK_CFG_MODE | + SPI_FSI_CLOCK_CFG_SCK_RECV_DEL | + SPI_FSI_CLOCK_CFG_SCK_DIV)) != wanted_clock_cfg) + rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, + wanted_clock_cfg); + + return rc; +} + +static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, + struct spi_message *mesg) +{ + int rc = 0; + u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1); + struct spi_transfer *transfer; + struct fsi_spi *ctx = spi_controller_get_devdata(ctlr); + + list_for_each_entry(transfer, &mesg->transfers, transfer_list) { + struct fsi_spi_sequence seq; + struct spi_transfer *next = NULL; + + /* Sequencer must do shift out (tx) first. */ + if (!transfer->tx_buf || + transfer->len > SPI_FSI_MAX_TRANSFER_SIZE) { + rc = -EINVAL; + goto error; + } + + dev_dbg(ctx->dev, "Start tx of %d bytes.\n", transfer->len); + + rc = fsi_spi_transfer_init(ctx); + if (rc < 0) + goto error; + + fsi_spi_sequence_init(&seq); + fsi_spi_sequence_add(&seq, seq_slave); + + rc = fsi_spi_sequence_transfer(ctx, &seq, transfer); + if (rc) + goto error; + + if (!list_is_last(&transfer->transfer_list, + &mesg->transfers)) { + next = list_next_entry(transfer, transfer_list); + + /* Sequencer can only do shift in (rx) after tx. */ + if (next->rx_buf) { + if (next->len > SPI_FSI_MAX_TRANSFER_SIZE) { + rc = -EINVAL; + goto error; + } + + dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n", + next->len); + + rc = fsi_spi_sequence_transfer(ctx, &seq, + next); + if (rc) + goto error; + } else { + next = NULL; + } + } + + fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SEL_SLAVE(0)); + + rc = fsi_spi_write_reg(ctx, SPI_FSI_SEQUENCE, seq.data); + if (rc) + goto error; + + rc = fsi_spi_transfer_data(ctx, transfer); + if (rc) + goto error; + + if (next) { + rc = fsi_spi_transfer_data(ctx, next); + if (rc) + goto error; + + transfer = next; + } + } + +error: + mesg->status = rc; + spi_finalize_current_message(ctlr); + + return rc; +} + +static size_t fsi_spi_max_transfer_size(struct spi_device *spi) +{ + return SPI_FSI_MAX_TRANSFER_SIZE; +} + +static int fsi_spi_probe(struct device *dev) +{ + int rc; + u32 root_ctrl_8; + struct device_node *np; + int num_controllers_registered = 0; + struct fsi_device *fsi = to_fsi_dev(dev); + + /* + * Check the SPI mux before attempting to probe. If the mux isn't set + * then the SPI controllers can't access their slave devices. + */ + rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8, + sizeof(root_ctrl_8)); + if (rc) + return rc; + + if (!root_ctrl_8) { + dev_dbg(dev, "SPI mux not set, aborting probe.\n"); + return -ENODEV; + } + + for_each_available_child_of_node(dev->of_node, np) { + u32 base; + struct fsi_spi *ctx; + struct spi_controller *ctlr; + + if (of_property_read_u32(np, "reg", &base)) + continue; + + ctlr = spi_alloc_master(dev, sizeof(*ctx)); + if (!ctlr) + break; + + ctlr->dev.of_node = np; + ctlr->num_chipselect = of_get_available_child_count(np) ?: 1; + ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; + ctlr->max_transfer_size = fsi_spi_max_transfer_size; + ctlr->transfer_one_message = fsi_spi_transfer_one_message; + + ctx = spi_controller_get_devdata(ctlr); + ctx->dev = &ctlr->dev; + ctx->fsi = fsi; + ctx->base = base + SPI_FSI_BASE; + + rc = devm_spi_register_controller(dev, ctlr); + if (rc) + spi_controller_put(ctlr); + else + num_controllers_registered++; + } + + if (!num_controllers_registered) + return -ENODEV; + + return 0; +} + +static const struct fsi_device_id fsi_spi_ids[] = { + { FSI_ENGID_SPI, FSI_VERSION_ANY }, + { } +}; +MODULE_DEVICE_TABLE(fsi, fsi_spi_ids); + +static struct fsi_driver fsi_spi_driver = { + .id_table = fsi_spi_ids, + .drv = { + .name = "spi-fsi", + .bus = &fsi_bus_type, + .probe = fsi_spi_probe, + }, +}; +module_fsi_driver(fsi_spi_driver); + +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); +MODULE_DESCRIPTION("FSI attached SPI controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 6ec2dcb8c57a..50e41f66a2d7 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -20,16 +20,9 @@ #define DRIVER_NAME "fsl-dspi" -#ifdef CONFIG_M5441x -#define DSPI_FIFO_SIZE 16 -#else -#define DSPI_FIFO_SIZE 4 -#endif -#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024) - #define SPI_MCR 0x00 #define SPI_MCR_MASTER BIT(31) -#define SPI_MCR_PCSIS (0x3F << 16) +#define SPI_MCR_PCSIS(x) ((x) << 16) #define SPI_MCR_CLR_TXF BIT(11) #define SPI_MCR_CLR_RXF BIT(10) #define SPI_MCR_XSPI BIT(3) @@ -79,6 +72,7 @@ #define SPI_RSER 0x30 #define SPI_RSER_TCFQE BIT(31) #define SPI_RSER_EOQFE BIT(28) +#define SPI_RSER_CMDTCFE BIT(23) #define SPI_PUSHR 0x34 #define SPI_PUSHR_CMD_CONT BIT(15) @@ -109,57 +103,95 @@ #define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1) #define SPI_FRAME_EBITS(bits) SPI_CTARE_FMSZE(((bits) - 1) >> 4) -/* Register offsets for regmap_pushr */ -#define PUSHR_CMD 0x0 -#define PUSHR_TX 0x2 - #define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000) struct chip_data { u32 ctar_val; - u16 void_write_data; }; enum dspi_trans_mode { DSPI_EOQ_MODE = 0, - DSPI_TCFQ_MODE, + DSPI_XSPI_MODE, DSPI_DMA_MODE, }; struct fsl_dspi_devtype_data { enum dspi_trans_mode trans_mode; u8 max_clock_factor; - bool ptp_sts_supported; - bool xspi_mode; -}; - -static const struct fsl_dspi_devtype_data vf610_data = { - .trans_mode = DSPI_DMA_MODE, - .max_clock_factor = 2, -}; - -static const struct fsl_dspi_devtype_data ls1021a_v1_data = { - .trans_mode = DSPI_TCFQ_MODE, - .max_clock_factor = 8, - .ptp_sts_supported = true, - .xspi_mode = true, + int fifo_size; }; -static const struct fsl_dspi_devtype_data ls2085a_data = { - .trans_mode = DSPI_TCFQ_MODE, - .max_clock_factor = 8, - .ptp_sts_supported = true, +enum { + LS1021A, + LS1012A, + LS1028A, + LS1043A, + LS1046A, + LS2080A, + LS2085A, + LX2160A, + MCF5441X, + VF610, }; -static const struct fsl_dspi_devtype_data coldfire_data = { - .trans_mode = DSPI_EOQ_MODE, - .max_clock_factor = 8, +static const struct fsl_dspi_devtype_data devtype_data[] = { + [VF610] = { + .trans_mode = DSPI_DMA_MODE, + .max_clock_factor = 2, + .fifo_size = 4, + }, + [LS1021A] = { + /* Has A-011218 DMA erratum */ + .trans_mode = DSPI_XSPI_MODE, + .max_clock_factor = 8, + .fifo_size = 4, + }, + [LS1012A] = { + /* Has A-011218 DMA erratum */ + .trans_mode = DSPI_XSPI_MODE, + .max_clock_factor = 8, + .fifo_size = 16, + }, + [LS1028A] = { + .trans_mode = DSPI_XSPI_MODE, + .max_clock_factor = 8, + .fifo_size = 4, + }, + [LS1043A] = { + /* Has A-011218 DMA erratum */ + .trans_mode = DSPI_XSPI_MODE, + .max_clock_factor = 8, + .fifo_size = 16, + }, + [LS1046A] = { + /* Has A-011218 DMA erratum */ + .trans_mode = DSPI_XSPI_MODE, + .max_clock_factor = 8, + .fifo_size = 16, + }, + [LS2080A] = { + .trans_mode = DSPI_DMA_MODE, + .max_clock_factor = 8, + .fifo_size = 4, + }, + [LS2085A] = { + .trans_mode = DSPI_DMA_MODE, + .max_clock_factor = 8, + .fifo_size = 4, + }, + [LX2160A] = { + .trans_mode = DSPI_DMA_MODE, + .max_clock_factor = 8, + .fifo_size = 4, + }, + [MCF5441X] = { + .trans_mode = DSPI_EOQ_MODE, + .max_clock_factor = 8, + .fifo_size = 16, + }, }; struct fsl_dspi_dma { - /* Length of transfer in words of DSPI_FIFO_SIZE */ - u32 curr_xfer_len; - u32 *tx_dma_buf; struct dma_chan *chan_tx; dma_addr_t tx_dma_phys; @@ -189,36 +221,99 @@ struct fsl_dspi { size_t len; const void *tx; void *rx; - void *rx_end; - u16 void_write_data; u16 tx_cmd; - u8 bits_per_word; - u8 bytes_per_word; const struct fsl_dspi_devtype_data *devtype_data; - wait_queue_head_t waitq; - u32 waitflags; + struct completion xfer_done; struct fsl_dspi_dma *dma; + + int oper_word_size; + int oper_bits_per_word; + + int words_in_flight; + + /* + * Offsets for CMD and TXDATA within SPI_PUSHR when accessed + * individually (in XSPI mode) + */ + int pushr_cmd; + int pushr_tx; + + void (*host_to_dev)(struct fsl_dspi *dspi, u32 *txdata); + void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata); }; +static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) +{ + memcpy(txdata, dspi->tx, dspi->oper_word_size); + dspi->tx += dspi->oper_word_size; +} + +static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) +{ + memcpy(dspi->rx, &rxdata, dspi->oper_word_size); + dspi->rx += dspi->oper_word_size; +} + +static void dspi_8on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) +{ + *txdata = cpu_to_be32(*(u32 *)dspi->tx); + dspi->tx += sizeof(u32); +} + +static void dspi_8on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) +{ + *(u32 *)dspi->rx = be32_to_cpu(rxdata); + dspi->rx += sizeof(u32); +} + +static void dspi_8on16_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) +{ + *txdata = cpu_to_be16(*(u16 *)dspi->tx); + dspi->tx += sizeof(u16); +} + +static void dspi_8on16_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) +{ + *(u16 *)dspi->rx = be16_to_cpu(rxdata); + dspi->rx += sizeof(u16); +} + +static void dspi_16on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) +{ + u16 hi = *(u16 *)dspi->tx; + u16 lo = *(u16 *)(dspi->tx + 2); + + *txdata = (u32)hi << 16 | lo; + dspi->tx += sizeof(u32); +} + +static void dspi_16on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) +{ + u16 hi = rxdata & 0xffff; + u16 lo = rxdata >> 16; + + *(u16 *)dspi->rx = lo; + *(u16 *)(dspi->rx + 2) = hi; + dspi->rx += sizeof(u32); +} + +/* + * Pop one word from the TX buffer for pushing into the + * PUSHR register (TX FIFO) + */ static u32 dspi_pop_tx(struct fsl_dspi *dspi) { u32 txdata = 0; - if (dspi->tx) { - if (dspi->bytes_per_word == 1) - txdata = *(u8 *)dspi->tx; - else if (dspi->bytes_per_word == 2) - txdata = *(u16 *)dspi->tx; - else /* dspi->bytes_per_word == 4 */ - txdata = *(u32 *)dspi->tx; - dspi->tx += dspi->bytes_per_word; - } - dspi->len -= dspi->bytes_per_word; + if (dspi->tx) + dspi->host_to_dev(dspi, &txdata); + dspi->len -= dspi->oper_word_size; return txdata; } +/* Prepare one TX FIFO entry (txdata plus cmd) */ static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi) { u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi); @@ -231,21 +326,12 @@ static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi) return cmd << 16 | data; } +/* Push one word to the RX buffer from the POPR register (RX FIFO) */ static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata) { if (!dspi->rx) return; - - /* Mask off undefined bits */ - rxdata &= (1 << dspi->bits_per_word) - 1; - - if (dspi->bytes_per_word == 1) - *(u8 *)dspi->rx = rxdata; - else if (dspi->bytes_per_word == 2) - *(u16 *)dspi->rx = rxdata; - else /* dspi->bytes_per_word == 4 */ - *(u32 *)dspi->rx = rxdata; - dspi->rx += dspi->bytes_per_word; + dspi->dev_to_host(dspi, rxdata); } static void dspi_tx_dma_callback(void *arg) @@ -263,7 +349,7 @@ static void dspi_rx_dma_callback(void *arg) int i; if (dspi->rx) { - for (i = 0; i < dma->curr_xfer_len; i++) + for (i = 0; i < dspi->words_in_flight; i++) dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]); } @@ -277,12 +363,12 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) int time_left; int i; - for (i = 0; i < dma->curr_xfer_len; i++) + for (i = 0; i < dspi->words_in_flight; i++) dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi); dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx, dma->tx_dma_phys, - dma->curr_xfer_len * + dspi->words_in_flight * DMA_SLAVE_BUSWIDTH_4_BYTES, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -300,7 +386,7 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx, dma->rx_dma_phys, - dma->curr_xfer_len * + dspi->words_in_flight * DMA_SLAVE_BUSWIDTH_4_BYTES, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -348,45 +434,42 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) return 0; } +static void dspi_setup_accel(struct fsl_dspi *dspi); + static int dspi_dma_xfer(struct fsl_dspi *dspi) { struct spi_message *message = dspi->cur_msg; struct device *dev = &dspi->pdev->dev; - struct fsl_dspi_dma *dma = dspi->dma; - int curr_remaining_bytes; - int bytes_per_buffer; int ret = 0; - curr_remaining_bytes = dspi->len; - bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE; - while (curr_remaining_bytes) { - /* Check if current transfer fits the DMA buffer */ - dma->curr_xfer_len = curr_remaining_bytes - / dspi->bytes_per_word; - if (dma->curr_xfer_len > bytes_per_buffer) - dma->curr_xfer_len = bytes_per_buffer; + /* + * dspi->len gets decremented by dspi_pop_tx_pushr in + * dspi_next_xfer_dma_submit + */ + while (dspi->len) { + /* Figure out operational bits-per-word for this chunk */ + dspi_setup_accel(dspi); + + dspi->words_in_flight = dspi->len / dspi->oper_word_size; + if (dspi->words_in_flight > dspi->devtype_data->fifo_size) + dspi->words_in_flight = dspi->devtype_data->fifo_size; + + message->actual_length += dspi->words_in_flight * + dspi->oper_word_size; ret = dspi_next_xfer_dma_submit(dspi); if (ret) { dev_err(dev, "DMA transfer failed\n"); - goto exit; - - } else { - const int len = - dma->curr_xfer_len * dspi->bytes_per_word; - curr_remaining_bytes -= len; - message->actual_length += len; - if (curr_remaining_bytes < 0) - curr_remaining_bytes = 0; + break; } } -exit: return ret; } static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) { + int dma_bufsize = dspi->devtype_data->fifo_size * 2; struct device *dev = &dspi->pdev->dev; struct dma_slave_config cfg; struct fsl_dspi_dma *dma; @@ -410,15 +493,17 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) goto err_tx_channel; } - dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE, - &dma->tx_dma_phys, GFP_KERNEL); + dma->tx_dma_buf = dma_alloc_coherent(dma->chan_tx->device->dev, + dma_bufsize, &dma->tx_dma_phys, + GFP_KERNEL); if (!dma->tx_dma_buf) { ret = -ENOMEM; goto err_tx_dma_buf; } - dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE, - &dma->rx_dma_phys, GFP_KERNEL); + dma->rx_dma_buf = dma_alloc_coherent(dma->chan_rx->device->dev, + dma_bufsize, &dma->rx_dma_phys, + GFP_KERNEL); if (!dma->rx_dma_buf) { ret = -ENOMEM; goto err_rx_dma_buf; @@ -454,11 +539,11 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) return 0; err_slave_config: - dma_free_coherent(dev, DSPI_DMA_BUFSIZE, - dma->rx_dma_buf, dma->rx_dma_phys); + dma_free_coherent(dma->chan_rx->device->dev, + dma_bufsize, dma->rx_dma_buf, dma->rx_dma_phys); err_rx_dma_buf: - dma_free_coherent(dev, DSPI_DMA_BUFSIZE, - dma->tx_dma_buf, dma->tx_dma_phys); + dma_free_coherent(dma->chan_tx->device->dev, + dma_bufsize, dma->tx_dma_buf, dma->tx_dma_phys); err_tx_dma_buf: dma_release_channel(dma->chan_tx); err_tx_channel: @@ -472,21 +557,21 @@ err_tx_channel: static void dspi_release_dma(struct fsl_dspi *dspi) { + int dma_bufsize = dspi->devtype_data->fifo_size * 2; struct fsl_dspi_dma *dma = dspi->dma; - struct device *dev = &dspi->pdev->dev; if (!dma) return; if (dma->chan_tx) { - dma_unmap_single(dev, dma->tx_dma_phys, - DSPI_DMA_BUFSIZE, DMA_TO_DEVICE); + dma_unmap_single(dma->chan_tx->device->dev, dma->tx_dma_phys, + dma_bufsize, DMA_TO_DEVICE); dma_release_channel(dma->chan_tx); } if (dma->chan_rx) { - dma_unmap_single(dev, dma->rx_dma_phys, - DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE); + dma_unmap_single(dma->chan_rx->device->dev, dma->rx_dma_phys, + dma_bufsize, DMA_FROM_DEVICE); dma_release_channel(dma->chan_rx); } } @@ -562,124 +647,220 @@ static void ns_delay_scale(char *psc, char *sc, int delay_ns, } } -static void fifo_write(struct fsl_dspi *dspi) +static void dspi_pushr_write(struct fsl_dspi *dspi) { regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi)); } -static void cmd_fifo_write(struct fsl_dspi *dspi) +static void dspi_pushr_cmd_write(struct fsl_dspi *dspi, u16 cmd) { - u16 cmd = dspi->tx_cmd; - - if (dspi->len > 0) + /* + * The only time when the PCS doesn't need continuation after this word + * is when it's last. We need to look ahead, because we actually call + * dspi_pop_tx (the function that decrements dspi->len) _after_ + * dspi_pushr_cmd_write with XSPI mode. As for how much in advance? One + * word is enough. If there's more to transmit than that, + * dspi_xspi_write will know to split the FIFO writes in 2, and + * generate a new PUSHR command with the final word that will have PCS + * deasserted (not continued) here. + */ + if (dspi->len > dspi->oper_word_size) cmd |= SPI_PUSHR_CMD_CONT; - regmap_write(dspi->regmap_pushr, PUSHR_CMD, cmd); + regmap_write(dspi->regmap_pushr, dspi->pushr_cmd, cmd); } -static void tx_fifo_write(struct fsl_dspi *dspi, u16 txdata) +static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata) { - regmap_write(dspi->regmap_pushr, PUSHR_TX, txdata); + regmap_write(dspi->regmap_pushr, dspi->pushr_tx, txdata); } -static void dspi_tcfq_write(struct fsl_dspi *dspi) +static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words) { - /* Clear transfer count */ - dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT; + int num_bytes = num_words * dspi->oper_word_size; + u16 tx_cmd = dspi->tx_cmd; - if (dspi->devtype_data->xspi_mode && dspi->bits_per_word > 16) { - /* Write the CMD FIFO entry first, and then the two - * corresponding TX FIFO entries. - */ - u32 data = dspi_pop_tx(dspi); + /* + * If the PCS needs to de-assert (i.e. we're at the end of the buffer + * and cs_change does not want the PCS to stay on), then we need a new + * PUSHR command, since this one (for the body of the buffer) + * necessarily has the CONT bit set. + * So send one word less during this go, to force a split and a command + * with a single word next time, when CONT will be unset. + */ + if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT) && num_bytes == dspi->len) + tx_cmd |= SPI_PUSHR_CMD_EOQ; - cmd_fifo_write(dspi); - tx_fifo_write(dspi, data & 0xFFFF); - tx_fifo_write(dspi, data >> 16); - } else { - /* Write one entry to both TX FIFO and CMD FIFO - * simultaneously. - */ - fifo_write(dspi); - } -} + /* Update CTARE */ + regmap_write(dspi->regmap, SPI_CTARE(0), + SPI_FRAME_EBITS(dspi->oper_bits_per_word) | + SPI_CTARE_DTCP(num_words)); -static u32 fifo_read(struct fsl_dspi *dspi) -{ - u32 rxdata = 0; + /* + * Write the CMD FIFO entry first, and then the two + * corresponding TX FIFO entries (or one...). + */ + dspi_pushr_cmd_write(dspi, tx_cmd); - regmap_read(dspi->regmap, SPI_POPR, &rxdata); - return rxdata; -} + /* Fill TX FIFO with as many transfers as possible */ + while (num_words--) { + u32 data = dspi_pop_tx(dspi); -static void dspi_tcfq_read(struct fsl_dspi *dspi) -{ - dspi_push_rx(dspi, fifo_read(dspi)); + dspi_pushr_txdata_write(dspi, data & 0xFFFF); + if (dspi->oper_bits_per_word > 16) + dspi_pushr_txdata_write(dspi, data >> 16); + } } -static void dspi_eoq_write(struct fsl_dspi *dspi) +static void dspi_eoq_fifo_write(struct fsl_dspi *dspi, int num_words) { - int fifo_size = DSPI_FIFO_SIZE; u16 xfer_cmd = dspi->tx_cmd; /* Fill TX FIFO with as many transfers as possible */ - while (dspi->len && fifo_size--) { + while (num_words--) { dspi->tx_cmd = xfer_cmd; /* Request EOQF for last transfer in FIFO */ - if (dspi->len == dspi->bytes_per_word || fifo_size == 0) + if (num_words == 0) dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ; - /* Clear transfer count for first transfer in FIFO */ - if (fifo_size == (DSPI_FIFO_SIZE - 1)) - dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT; /* Write combined TX FIFO and CMD FIFO entry */ - fifo_write(dspi); + dspi_pushr_write(dspi); } } -static void dspi_eoq_read(struct fsl_dspi *dspi) +static u32 dspi_popr_read(struct fsl_dspi *dspi) { - int fifo_size = DSPI_FIFO_SIZE; + u32 rxdata = 0; + + regmap_read(dspi->regmap, SPI_POPR, &rxdata); + return rxdata; +} + +static void dspi_fifo_read(struct fsl_dspi *dspi) +{ + int num_fifo_entries = dspi->words_in_flight; /* Read one FIFO entry and push to rx buffer */ - while ((dspi->rx < dspi->rx_end) && fifo_size--) - dspi_push_rx(dspi, fifo_read(dspi)); + while (num_fifo_entries--) + dspi_push_rx(dspi, dspi_popr_read(dspi)); } -static int dspi_rxtx(struct fsl_dspi *dspi) +static void dspi_setup_accel(struct fsl_dspi *dspi) { + struct spi_transfer *xfer = dspi->cur_transfer; + bool odd = !!(dspi->len & 1); + + /* No accel for frames not multiple of 8 bits at the moment */ + if (xfer->bits_per_word % 8) + goto no_accel; + + if (!odd && dspi->len <= dspi->devtype_data->fifo_size * 2) { + dspi->oper_bits_per_word = 16; + } else if (odd && dspi->len <= dspi->devtype_data->fifo_size) { + dspi->oper_bits_per_word = 8; + } else { + /* Start off with maximum supported by hardware */ + if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) + dspi->oper_bits_per_word = 32; + else + dspi->oper_bits_per_word = 16; + + /* + * And go down only if the buffer can't be sent with + * words this big + */ + do { + if (dspi->len >= DIV_ROUND_UP(dspi->oper_bits_per_word, 8)) + break; + + dspi->oper_bits_per_word /= 2; + } while (dspi->oper_bits_per_word > 8); + } + + if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 32) { + dspi->dev_to_host = dspi_8on32_dev_to_host; + dspi->host_to_dev = dspi_8on32_host_to_dev; + } else if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 16) { + dspi->dev_to_host = dspi_8on16_dev_to_host; + dspi->host_to_dev = dspi_8on16_host_to_dev; + } else if (xfer->bits_per_word == 16 && dspi->oper_bits_per_word == 32) { + dspi->dev_to_host = dspi_16on32_dev_to_host; + dspi->host_to_dev = dspi_16on32_host_to_dev; + } else { +no_accel: + dspi->dev_to_host = dspi_native_dev_to_host; + dspi->host_to_dev = dspi_native_host_to_dev; + dspi->oper_bits_per_word = xfer->bits_per_word; + } + + dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8); + + /* + * Update CTAR here (code is common for EOQ, XSPI and DMA modes). + * We will update CTARE in the portion specific to XSPI, when we + * also know the preload value (DTCP). + */ + regmap_write(dspi->regmap, SPI_CTAR(0), + dspi->cur_chip->ctar_val | + SPI_FRAME_BITS(dspi->oper_bits_per_word)); +} + +static void dspi_fifo_write(struct fsl_dspi *dspi) +{ + int num_fifo_entries = dspi->devtype_data->fifo_size; + struct spi_transfer *xfer = dspi->cur_transfer; struct spi_message *msg = dspi->cur_msg; - enum dspi_trans_mode trans_mode; - u16 spi_tcnt; - u32 spi_tcr; + int num_words, num_bytes; - spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer, - dspi->progress, !dspi->irq); + dspi_setup_accel(dspi); + + /* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */ + if (dspi->oper_word_size == 4) + num_fifo_entries /= 2; - /* Get transfer counter (in number of SPI transfers). It was - * reset to 0 when transfer(s) were started. + /* + * Integer division intentionally trims off odd (or non-multiple of 4) + * numbers of bytes at the end of the buffer, which will be sent next + * time using a smaller oper_word_size. */ - regmap_read(dspi->regmap, SPI_TCR, &spi_tcr); - spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr); + num_words = dspi->len / dspi->oper_word_size; + if (num_words > num_fifo_entries) + num_words = num_fifo_entries; + /* Update total number of bytes that were transferred */ - msg->actual_length += spi_tcnt * dspi->bytes_per_word; - dspi->progress += spi_tcnt; + num_bytes = num_words * dspi->oper_word_size; + msg->actual_length += num_bytes; + dspi->progress += num_bytes / DIV_ROUND_UP(xfer->bits_per_word, 8); - trans_mode = dspi->devtype_data->trans_mode; - if (trans_mode == DSPI_EOQ_MODE) - dspi_eoq_read(dspi); - else if (trans_mode == DSPI_TCFQ_MODE) - dspi_tcfq_read(dspi); + /* + * Update shared variable for use in the next interrupt (both in + * dspi_fifo_read and in dspi_fifo_write). + */ + dspi->words_in_flight = num_words; + + spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq); + + if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE) + dspi_eoq_fifo_write(dspi, num_words); + else + dspi_xspi_fifo_write(dspi, num_words); + /* + * Everything after this point is in a potential race with the next + * interrupt, so we must never use dspi->words_in_flight again since it + * might already be modified by the next dspi_fifo_write. + */ + + spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer, + dspi->progress, !dspi->irq); +} + +static int dspi_rxtx(struct fsl_dspi *dspi) +{ + dspi_fifo_read(dspi); if (!dspi->len) /* Success! */ return 0; - spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer, - dspi->progress, !dspi->irq); - - if (trans_mode == DSPI_EOQ_MODE) - dspi_eoq_write(dspi); - else if (trans_mode == DSPI_TCFQ_MODE) - dspi_tcfq_write(dspi); + dspi_fifo_write(dspi); return -EINPROGRESS; } @@ -693,7 +874,7 @@ static int dspi_poll(struct fsl_dspi *dspi) regmap_read(dspi->regmap, SPI_SR, &spi_sr); regmap_write(dspi->regmap, SPI_SR, spi_sr); - if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)) + if (spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF)) break; } while (--tries); @@ -711,13 +892,11 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) regmap_read(dspi->regmap, SPI_SR, &spi_sr); regmap_write(dspi->regmap, SPI_SR, spi_sr); - if (!(spi_sr & SPI_SR_EOQF)) + if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF))) return IRQ_NONE; - if (dspi_rxtx(dspi) == 0) { - dspi->waitflags = 1; - wake_up_interruptible(&dspi->waitq); - } + if (dspi_rxtx(dspi) == 0) + complete(&dspi->xfer_done); return IRQ_HANDLED; } @@ -727,7 +906,6 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, { struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); struct spi_device *spi = message->spi; - enum dspi_trans_mode trans_mode; struct spi_transfer *transfer; int status = 0; @@ -757,76 +935,38 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; } - dspi->void_write_data = dspi->cur_chip->void_write_data; - dspi->tx = transfer->tx_buf; dspi->rx = transfer->rx_buf; - dspi->rx_end = dspi->rx + transfer->len; dspi->len = transfer->len; dspi->progress = 0; - /* Validated transfer specific frame size (defaults applied) */ - dspi->bits_per_word = transfer->bits_per_word; - if (transfer->bits_per_word <= 8) - dspi->bytes_per_word = 1; - else if (transfer->bits_per_word <= 16) - dspi->bytes_per_word = 2; - else - dspi->bytes_per_word = 4; regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); - regmap_write(dspi->regmap, SPI_CTAR(0), - dspi->cur_chip->ctar_val | - SPI_FRAME_BITS(transfer->bits_per_word)); - if (dspi->devtype_data->xspi_mode) - regmap_write(dspi->regmap, SPI_CTARE(0), - SPI_FRAME_EBITS(transfer->bits_per_word) | - SPI_CTARE_DTCP(1)); spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer, dspi->progress, !dspi->irq); - trans_mode = dspi->devtype_data->trans_mode; - switch (trans_mode) { - case DSPI_EOQ_MODE: - regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE); - dspi_eoq_write(dspi); - break; - case DSPI_TCFQ_MODE: - regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE); - dspi_tcfq_write(dspi); - break; - case DSPI_DMA_MODE: - regmap_write(dspi->regmap, SPI_RSER, - SPI_RSER_TFFFE | SPI_RSER_TFFFD | - SPI_RSER_RFDFE | SPI_RSER_RFDFD); + if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { status = dspi_dma_xfer(dspi); - break; - default: - dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n", - trans_mode); - status = -EINVAL; - goto out; - } - - if (!dspi->irq) { - do { - status = dspi_poll(dspi); - } while (status == -EINPROGRESS); - } else if (trans_mode != DSPI_DMA_MODE) { - status = wait_event_interruptible(dspi->waitq, - dspi->waitflags); - dspi->waitflags = 0; + } else { + dspi_fifo_write(dspi); + + if (dspi->irq) { + wait_for_completion(&dspi->xfer_done); + reinit_completion(&dspi->xfer_done); + } else { + do { + status = dspi_poll(dspi); + } while (status == -EINPROGRESS); + } } if (status) - dev_err(&dspi->pdev->dev, - "Waiting for transfer to complete failed!\n"); + break; spi_transfer_delay_exec(transfer); } -out: message->status = status; spi_finalize_current_message(ctlr); @@ -864,8 +1004,6 @@ static int dspi_setup(struct spi_device *spi) sck_cs_delay = pdata->sck_cs_delay; } - chip->void_write_data = 0; - clkrate = clk_get_rate(dspi->clk); hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate); @@ -909,9 +1047,34 @@ static void dspi_cleanup(struct spi_device *spi) } static const struct of_device_id fsl_dspi_dt_ids[] = { - { .compatible = "fsl,vf610-dspi", .data = &vf610_data, }, - { .compatible = "fsl,ls1021a-v1.0-dspi", .data = &ls1021a_v1_data, }, - { .compatible = "fsl,ls2085a-dspi", .data = &ls2085a_data, }, + { + .compatible = "fsl,vf610-dspi", + .data = &devtype_data[VF610], + }, { + .compatible = "fsl,ls1021a-v1.0-dspi", + .data = &devtype_data[LS1021A], + }, { + .compatible = "fsl,ls1012a-dspi", + .data = &devtype_data[LS1012A], + }, { + .compatible = "fsl,ls1028a-dspi", + .data = &devtype_data[LS1028A], + }, { + .compatible = "fsl,ls1043a-dspi", + .data = &devtype_data[LS1043A], + }, { + .compatible = "fsl,ls1046a-dspi", + .data = &devtype_data[LS1046A], + }, { + .compatible = "fsl,ls2080a-dspi", + .data = &devtype_data[LS2080A], + }, { + .compatible = "fsl,ls2085a-dspi", + .data = &devtype_data[LS2085A], + }, { + .compatible = "fsl,lx2160a-dspi", + .data = &devtype_data[LX2160A], + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); @@ -997,20 +1160,40 @@ static const struct regmap_config dspi_xspi_regmap_config[] = { }, }; -static void dspi_init(struct fsl_dspi *dspi) +static int dspi_init(struct fsl_dspi *dspi) { - unsigned int mcr = SPI_MCR_PCSIS; + unsigned int mcr; + + /* Set idle states for all chip select signals to high */ + mcr = SPI_MCR_PCSIS(GENMASK(dspi->ctlr->num_chipselect - 1, 0)); - if (dspi->devtype_data->xspi_mode) + if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) mcr |= SPI_MCR_XSPI; if (!spi_controller_is_slave(dspi->ctlr)) mcr |= SPI_MCR_MASTER; regmap_write(dspi->regmap, SPI_MCR, mcr); regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR); - if (dspi->devtype_data->xspi_mode) - regmap_write(dspi->regmap, SPI_CTARE(0), - SPI_CTARE_FMSZE(0) | SPI_CTARE_DTCP(1)); + + switch (dspi->devtype_data->trans_mode) { + case DSPI_EOQ_MODE: + regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE); + break; + case DSPI_XSPI_MODE: + regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE); + break; + case DSPI_DMA_MODE: + regmap_write(dspi->regmap, SPI_RSER, + SPI_RSER_TFFFE | SPI_RSER_TFFFD | + SPI_RSER_RFDFE | SPI_RSER_RFDFD); + break; + default: + dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n", + dspi->devtype_data->trans_mode); + return -EINVAL; + } + + return 0; } static int dspi_slave_abort(struct spi_master *master) @@ -1021,8 +1204,10 @@ static int dspi_slave_abort(struct spi_master *master) * Terminate all pending DMA transactions for the SPI working * in SLAVE mode. */ - dmaengine_terminate_sync(dspi->dma->chan_rx); - dmaengine_terminate_sync(dspi->dma->chan_tx); + if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { + dmaengine_terminate_sync(dspi->dma->chan_rx); + dmaengine_terminate_sync(dspi->dma->chan_tx); + } /* Clear the internal DSPI RX and TX FIFO buffers */ regmap_update_bits(dspi->regmap, SPI_MCR, @@ -1032,16 +1217,33 @@ static int dspi_slave_abort(struct spi_master *master) return 0; } +/* + * EOQ mode will inevitably deassert its PCS signal on last word in a queue + * (hardware limitation), so we need to inform the spi_device that larger + * buffers than the FIFO size are going to have the chip select randomly + * toggling, so it has a chance to adapt its message sizes. + */ +static size_t dspi_max_message_size(struct spi_device *spi) +{ + struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller); + + if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE) + return dspi->devtype_data->fifo_size; + + return SIZE_MAX; +} + static int dspi_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct regmap_config *regmap_config; struct fsl_dspi_platform_data *pdata; struct spi_controller *ctlr; - int ret, cs_num, bus_num; + int ret, cs_num, bus_num = -1; struct fsl_dspi *dspi; struct resource *res; void __iomem *base; + bool big_endian; ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi)); if (!ctlr) @@ -1053,6 +1255,7 @@ static int dspi_probe(struct platform_device *pdev) ctlr->setup = dspi_setup; ctlr->transfer_one_message = dspi_transfer_one_message; + ctlr->max_message_size = dspi_max_message_size; ctlr->dev.of_node = pdev->dev.of_node; ctlr->cleanup = dspi_cleanup; @@ -1064,7 +1267,9 @@ static int dspi_probe(struct platform_device *pdev) ctlr->num_chipselect = pdata->cs_num; ctlr->bus_num = pdata->bus_num; - dspi->devtype_data = &coldfire_data; + /* Only Coldfire uses platform data */ + dspi->devtype_data = &devtype_data[MCF5441X]; + big_endian = true; } else { ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num); @@ -1074,11 +1279,7 @@ static int dspi_probe(struct platform_device *pdev) } ctlr->num_chipselect = cs_num; - ret = of_property_read_u32(np, "bus-num", &bus_num); - if (ret < 0) { - dev_err(&pdev->dev, "can't get bus-num\n"); - goto out_ctlr_put; - } + of_property_read_u32(np, "bus-num", &bus_num); ctlr->bus_num = bus_num; if (of_property_read_bool(np, "spi-slave")) @@ -1090,9 +1291,18 @@ static int dspi_probe(struct platform_device *pdev) ret = -EFAULT; goto out_ctlr_put; } + + big_endian = of_device_is_big_endian(np); + } + if (big_endian) { + dspi->pushr_cmd = 0; + dspi->pushr_tx = 2; + } else { + dspi->pushr_cmd = 2; + dspi->pushr_tx = 0; } - if (dspi->devtype_data->xspi_mode) + if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); else ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); @@ -1104,7 +1314,7 @@ static int dspi_probe(struct platform_device *pdev) goto out_ctlr_put; } - if (dspi->devtype_data->xspi_mode) + if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) regmap_config = &dspi_xspi_regmap_config[0]; else regmap_config = &dspi_regmap_config; @@ -1116,7 +1326,7 @@ static int dspi_probe(struct platform_device *pdev) goto out_ctlr_put; } - if (dspi->devtype_data->xspi_mode) { + if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) { dspi->regmap_pushr = devm_regmap_init_mmio( &pdev->dev, base + SPI_PUSHR, &dspi_xspi_regmap_config[1]); @@ -1139,10 +1349,9 @@ static int dspi_probe(struct platform_device *pdev) if (ret) goto out_ctlr_put; - dspi_init(dspi); - - if (dspi->devtype_data->trans_mode == DSPI_TCFQ_MODE) - goto poll_mode; + ret = dspi_init(dspi); + if (ret) + goto out_clk_put; dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq <= 0) { @@ -1159,7 +1368,7 @@ static int dspi_probe(struct platform_device *pdev) goto out_clk_put; } - init_waitqueue_head(&dspi->waitq); + init_completion(&dspi->xfer_done); poll_mode: @@ -1174,7 +1383,8 @@ poll_mode: ctlr->max_speed_hz = clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor; - ctlr->ptp_sts_supported = dspi->devtype_data->ptp_sts_supported; + if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE) + ctlr->ptp_sts_supported = true; platform_set_drvdata(pdev, ctlr); diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index d0b8cc741a24..8b41b70f6f5c 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -86,8 +86,6 @@ #define TCR_RXMSK BIT(19) #define TCR_TXMSK BIT(18) -static int clkdivs[] = {1, 2, 4, 8, 16, 32, 64, 128}; - struct lpspi_config { u8 bpw; u8 chip_select; @@ -125,7 +123,7 @@ struct fsl_lpspi_data { struct completion dma_rx_completion; struct completion dma_tx_completion; - int chipselect[0]; + int chipselect[]; }; static const struct of_device_id fsl_lpspi_dt_ids[] = { @@ -331,15 +329,14 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) } for (prescale = 0; prescale < 8; prescale++) { - scldiv = perclk_rate / - (clkdivs[prescale] * config.speed_hz) - 2; + scldiv = perclk_rate / config.speed_hz / (1 << prescale) - 2; if (scldiv < 256) { fsl_lpspi->config.prescale = prescale; break; } } - if (prescale == 8 && scldiv >= 256) + if (scldiv >= 256) return -EINVAL; writel(scldiv | (scldiv << 8) | ((scldiv >> 1) << 16), diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index 6f3d64a1a2b3..c3972424af71 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -6,7 +6,6 @@ #include <linux/io.h> #include <linux/log2.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/qcom-geni-se.h> @@ -536,6 +535,7 @@ static int spi_geni_probe(struct platform_device *pdev) struct spi_geni_master *mas; void __iomem *base; struct clk *clk; + struct device *dev = &pdev->dev; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -545,28 +545,25 @@ static int spi_geni_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - clk = devm_clk_get(&pdev->dev, "se"); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "Err getting SE Core clk %ld\n", - PTR_ERR(clk)); + clk = devm_clk_get(dev, "se"); + if (IS_ERR(clk)) return PTR_ERR(clk); - } - spi = spi_alloc_master(&pdev->dev, sizeof(*mas)); + spi = spi_alloc_master(dev, sizeof(*mas)); if (!spi) return -ENOMEM; platform_set_drvdata(pdev, spi); mas = spi_master_get_devdata(spi); mas->irq = irq; - mas->dev = &pdev->dev; - mas->se.dev = &pdev->dev; - mas->se.wrapper = dev_get_drvdata(pdev->dev.parent); + mas->dev = dev; + mas->se.dev = dev; + mas->se.wrapper = dev_get_drvdata(dev->parent); mas->se.base = base; mas->se.clk = clk; spi->bus_num = -1; - spi->dev.of_node = pdev->dev.of_node; + spi->dev.of_node = dev->of_node; spi->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH; spi->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); spi->num_chipselect = 4; @@ -579,14 +576,13 @@ static int spi_geni_probe(struct platform_device *pdev) init_completion(&mas->xfer_done); spin_lock_init(&mas->lock); - pm_runtime_enable(&pdev->dev); + pm_runtime_enable(dev); ret = spi_geni_init(mas); if (ret) goto spi_geni_probe_runtime_disable; - ret = request_irq(mas->irq, geni_spi_isr, - IRQF_TRIGGER_HIGH, "spi_geni", spi); + ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi); if (ret) goto spi_geni_probe_runtime_disable; @@ -598,7 +594,7 @@ static int spi_geni_probe(struct platform_device *pdev) spi_geni_probe_free_irq: free_irq(mas->irq, spi); spi_geni_probe_runtime_disable: - pm_runtime_disable(&pdev->dev); + pm_runtime_disable(dev); spi_master_put(spi); return ret; } diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index 4cf8fc80a7b7..e3b57252d075 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -7,6 +7,7 @@ #include <linux/acpi.h> #include <linux/bitops.h> +#include <linux/dmi.h> #include <linux/iopoll.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -17,6 +18,12 @@ #define HISI_SFC_V3XX_VERSION (0x1f8) #define HISI_SFC_V3XX_CMD_CFG (0x300) +#define HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT (1 << 17) +#define HISI_SFC_V3XX_CMD_CFG_DUAL_IO (2 << 17) +#define HISI_SFC_V3XX_CMD_CFG_FULL_DIO (3 << 17) +#define HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT (5 << 17) +#define HISI_SFC_V3XX_CMD_CFG_QUAD_IO (6 << 17) +#define HISI_SFC_V3XX_CMD_CFG_FULL_QIO (7 << 17) #define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9 #define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8) #define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7) @@ -161,6 +168,43 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host, if (op->addr.nbytes) config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK; + switch (op->data.buswidth) { + case 0 ... 1: + break; + case 2: + if (op->addr.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT; + } else if (op->addr.buswidth == 2) { + if (op->cmd.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IO; + } else if (op->cmd.buswidth == 2) { + config |= HISI_SFC_V3XX_CMD_CFG_FULL_DIO; + } else { + return -EIO; + } + } else { + return -EIO; + } + break; + case 4: + if (op->addr.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT; + } else if (op->addr.buswidth == 4) { + if (op->cmd.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IO; + } else if (op->cmd.buswidth == 4) { + config |= HISI_SFC_V3XX_CMD_CFG_FULL_QIO; + } else { + return -EIO; + } + } else { + return -EIO; + } + break; + default: + return -EOPNOTSUPP; + } + if (op->data.dir != SPI_MEM_NO_DATA) { config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF; config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK; @@ -207,6 +251,44 @@ static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = { .exec_op = hisi_sfc_v3xx_exec_op, }; +static int hisi_sfc_v3xx_buswidth_override_bits; + +/* + * ACPI FW does not allow us to currently set the device buswidth, so quirk it + * depending on the board. + */ +static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d) +{ + hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD; + + return 0; +} + +static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[] = { + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "D06"), + }, + }, + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"), + }, + }, + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"), + }, + }, + {} +}; + static int hisi_sfc_v3xx_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -222,6 +304,8 @@ static int hisi_sfc_v3xx_probe(struct platform_device *pdev) ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits; + host = spi_controller_get_devdata(ctlr); host->dev = dev; @@ -277,7 +361,20 @@ static struct platform_driver hisi_sfc_v3xx_spi_driver = { .probe = hisi_sfc_v3xx_probe, }; -module_platform_driver(hisi_sfc_v3xx_spi_driver); +static int __init hisi_sfc_v3xx_spi_init(void) +{ + dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table); + + return platform_driver_register(&hisi_sfc_v3xx_spi_driver); +} + +static void __exit hisi_sfc_v3xx_spi_exit(void) +{ + platform_driver_unregister(&hisi_sfc_v3xx_spi_driver); +} + +module_init(hisi_sfc_v3xx_spi_init); +module_exit(hisi_sfc_v3xx_spi_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Garry <john.garry@huawei.com>"); diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index e5a46f0eb93b..adaa0c49f966 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -418,12 +418,13 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) struct spi_controller *ctlr = mem->spi->controller; size_t len; - len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; - if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size) return ctlr->mem_ops->adjust_op_size(mem, op); if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) { + len = sizeof(op->cmd.opcode) + op->addr.nbytes + + op->dummy.nbytes; + if (len > spi_max_transfer_size(mem->spi)) return -EINVAL; @@ -487,7 +488,7 @@ static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc, * This function is creating a direct mapping descriptor which can then be used * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write(). * If the SPI controller driver does not support direct mapping, this function - * fallback to an implementation using spi_mem_exec_op(), so that the caller + * falls back to an implementation using spi_mem_exec_op(), so that the caller * doesn't have to bother implementing a fallback on his own. * * Return: a valid pointer in case of success, and ERR_PTR() otherwise. diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 7f5680fe2568..77f7d0e0e46a 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -9,11 +9,13 @@ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/device.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/types.h> @@ -33,7 +35,6 @@ * to have a CS go down over the full transfer */ -#define SPICC_MAX_FREQ 30000000 #define SPICC_MAX_BURST 128 /* Register Map */ @@ -105,7 +106,21 @@ #define SPICC_SWAP_RO BIT(14) /* RX FIFO Data Swap Read-Only */ #define SPICC_SWAP_W1 BIT(15) /* RX FIFO Data Swap Write-Only */ #define SPICC_DLYCTL_RO_MASK GENMASK(20, 15) /* Delay Control Read-Only */ -#define SPICC_DLYCTL_W1_MASK GENMASK(21, 16) /* Delay Control Write-Only */ +#define SPICC_MO_DELAY_MASK GENMASK(17, 16) /* Master Output Delay */ +#define SPICC_MO_NO_DELAY 0 +#define SPICC_MO_DELAY_1_CYCLE 1 +#define SPICC_MO_DELAY_2_CYCLE 2 +#define SPICC_MO_DELAY_3_CYCLE 3 +#define SPICC_MI_DELAY_MASK GENMASK(19, 18) /* Master Input Delay */ +#define SPICC_MI_NO_DELAY 0 +#define SPICC_MI_DELAY_1_CYCLE 1 +#define SPICC_MI_DELAY_2_CYCLE 2 +#define SPICC_MI_DELAY_3_CYCLE 3 +#define SPICC_MI_CAP_DELAY_MASK GENMASK(21, 20) /* Master Capture Delay */ +#define SPICC_CAP_AHEAD_2_CYCLE 0 +#define SPICC_CAP_AHEAD_1_CYCLE 1 +#define SPICC_CAP_NO_DELAY 2 +#define SPICC_CAP_DELAY_1_CYCLE 3 #define SPICC_FIFORST_RO_MASK GENMASK(22, 21) /* FIFO Softreset Read-Only */ #define SPICC_FIFORST_W1_MASK GENMASK(23, 22) /* FIFO Softreset Write-Only */ @@ -113,31 +128,59 @@ #define SPICC_DWADDR 0x24 /* Write Address of DMA */ +#define SPICC_ENH_CTL0 0x38 /* Enhanced Feature */ +#define SPICC_ENH_CLK_CS_DELAY_MASK GENMASK(15, 0) +#define SPICC_ENH_DATARATE_MASK GENMASK(23, 16) +#define SPICC_ENH_DATARATE_EN BIT(24) +#define SPICC_ENH_MOSI_OEN BIT(25) +#define SPICC_ENH_CLK_OEN BIT(26) +#define SPICC_ENH_CS_OEN BIT(27) +#define SPICC_ENH_CLK_CS_DELAY_EN BIT(28) +#define SPICC_ENH_MAIN_CLK_AO BIT(29) + #define writel_bits_relaxed(mask, val, addr) \ writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr) -#define SPICC_BURST_MAX 16 -#define SPICC_FIFO_HALF 10 +struct meson_spicc_data { + unsigned int max_speed_hz; + unsigned int min_speed_hz; + unsigned int fifo_size; + bool has_oen; + bool has_enhance_clk_div; + bool has_pclk; +}; struct meson_spicc_device { struct spi_master *master; struct platform_device *pdev; void __iomem *base; struct clk *core; + struct clk *pclk; + struct clk *clk; struct spi_message *message; struct spi_transfer *xfer; + const struct meson_spicc_data *data; u8 *tx_buf; u8 *rx_buf; unsigned int bytes_per_word; unsigned long tx_remain; - unsigned long txb_remain; unsigned long rx_remain; - unsigned long rxb_remain; unsigned long xfer_remain; - bool is_burst_end; - bool is_last_burst; }; +static void meson_spicc_oen_enable(struct meson_spicc_device *spicc) +{ + u32 conf; + + if (!spicc->data->has_oen) + return; + + conf = readl_relaxed(spicc->base + SPICC_ENH_CTL0) | + SPICC_ENH_MOSI_OEN | SPICC_ENH_CLK_OEN | SPICC_ENH_CS_OEN; + + writel_relaxed(conf, spicc->base + SPICC_ENH_CTL0); +} + static inline bool meson_spicc_txfull(struct meson_spicc_device *spicc) { return !!FIELD_GET(SPICC_TF, @@ -146,7 +189,7 @@ static inline bool meson_spicc_txfull(struct meson_spicc_device *spicc) static inline bool meson_spicc_rxready(struct meson_spicc_device *spicc) { - return FIELD_GET(SPICC_RH | SPICC_RR | SPICC_RF_EN, + return FIELD_GET(SPICC_RH | SPICC_RR | SPICC_RF, readl_relaxed(spicc->base + SPICC_STATREG)); } @@ -201,34 +244,22 @@ static inline void meson_spicc_tx(struct meson_spicc_device *spicc) spicc->base + SPICC_TXDATA); } -static inline u32 meson_spicc_setup_rx_irq(struct meson_spicc_device *spicc, - u32 irq_ctrl) +static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc) { - if (spicc->rx_remain > SPICC_FIFO_HALF) - irq_ctrl |= SPICC_RH_EN; - else - irq_ctrl |= SPICC_RR_EN; - - return irq_ctrl; -} -static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc, - unsigned int burst_len) -{ + unsigned int burst_len = min_t(unsigned int, + spicc->xfer_remain / + spicc->bytes_per_word, + spicc->data->fifo_size); /* Setup Xfer variables */ spicc->tx_remain = burst_len; spicc->rx_remain = burst_len; spicc->xfer_remain -= burst_len * spicc->bytes_per_word; - spicc->is_burst_end = false; - if (burst_len < SPICC_BURST_MAX || !spicc->xfer_remain) - spicc->is_last_burst = true; - else - spicc->is_last_burst = false; /* Setup burst length */ writel_bits_relaxed(SPICC_BURSTLENGTH_MASK, FIELD_PREP(SPICC_BURSTLENGTH_MASK, - burst_len), + burst_len - 1), spicc->base + SPICC_CONREG); /* Fill TX FIFO */ @@ -238,97 +269,71 @@ static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc, static irqreturn_t meson_spicc_irq(int irq, void *data) { struct meson_spicc_device *spicc = (void *) data; - u32 ctrl = readl_relaxed(spicc->base + SPICC_INTREG); - u32 stat = readl_relaxed(spicc->base + SPICC_STATREG) & ctrl; - ctrl &= ~(SPICC_RH_EN | SPICC_RR_EN); + writel_bits_relaxed(SPICC_TC, SPICC_TC, spicc->base + SPICC_STATREG); /* Empty RX FIFO */ meson_spicc_rx(spicc); - /* Enable TC interrupt since we transferred everything */ - if (!spicc->tx_remain && !spicc->rx_remain) { - spicc->is_burst_end = true; - - /* Enable TC interrupt */ - ctrl |= SPICC_TC_EN; + if (!spicc->xfer_remain) { + /* Disable all IRQs */ + writel(0, spicc->base + SPICC_INTREG); - /* Reload IRQ status */ - stat = readl_relaxed(spicc->base + SPICC_STATREG) & ctrl; - } - - /* Check transfer complete */ - if ((stat & SPICC_TC) && spicc->is_burst_end) { - unsigned int burst_len; - - /* Clear TC bit */ - writel_relaxed(SPICC_TC, spicc->base + SPICC_STATREG); - - /* Disable TC interrupt */ - ctrl &= ~SPICC_TC_EN; - - if (spicc->is_last_burst) { - /* Disable all IRQs */ - writel(0, spicc->base + SPICC_INTREG); - - spi_finalize_current_transfer(spicc->master); - - return IRQ_HANDLED; - } - - burst_len = min_t(unsigned int, - spicc->xfer_remain / spicc->bytes_per_word, - SPICC_BURST_MAX); + spi_finalize_current_transfer(spicc->master); - /* Setup burst */ - meson_spicc_setup_burst(spicc, burst_len); - - /* Restart burst */ - writel_bits_relaxed(SPICC_XCH, SPICC_XCH, - spicc->base + SPICC_CONREG); + return IRQ_HANDLED; } - /* Setup RX interrupt trigger */ - ctrl = meson_spicc_setup_rx_irq(spicc, ctrl); + /* Setup burst */ + meson_spicc_setup_burst(spicc); - /* Reconfigure interrupts */ - writel(ctrl, spicc->base + SPICC_INTREG); + /* Start burst */ + writel_bits_relaxed(SPICC_XCH, SPICC_XCH, spicc->base + SPICC_CONREG); return IRQ_HANDLED; } -static u32 meson_spicc_setup_speed(struct meson_spicc_device *spicc, u32 conf, - u32 speed) +static void meson_spicc_auto_io_delay(struct meson_spicc_device *spicc) { - unsigned long parent, value; - unsigned int i, div; - - parent = clk_get_rate(spicc->core); - - /* Find closest inferior/equal possible speed */ - for (i = 0 ; i < 7 ; ++i) { - /* 2^(data_rate+2) */ - value = parent >> (i + 2); - - if (value <= speed) - break; + u32 div, hz; + u32 mi_delay, cap_delay; + u32 conf; + + if (spicc->data->has_enhance_clk_div) { + div = FIELD_GET(SPICC_ENH_DATARATE_MASK, + readl_relaxed(spicc->base + SPICC_ENH_CTL0)); + div++; + div <<= 1; + } else { + div = FIELD_GET(SPICC_DATARATE_MASK, + readl_relaxed(spicc->base + SPICC_CONREG)); + div += 2; + div = 1 << div; } - /* If provided speed it lower than max divider, use max divider */ - if (i > 7) { - div = 7; - dev_warn_once(&spicc->pdev->dev, "unable to get close to speed %u\n", - speed); - } else - div = i; - - dev_dbg(&spicc->pdev->dev, "parent %lu, speed %u -> %lu (%u)\n", - parent, speed, value, div); - - conf &= ~SPICC_DATARATE_MASK; - conf |= FIELD_PREP(SPICC_DATARATE_MASK, div); - - return conf; + mi_delay = SPICC_MI_NO_DELAY; + cap_delay = SPICC_CAP_AHEAD_2_CYCLE; + hz = clk_get_rate(spicc->clk); + + if (hz >= 100000000) + cap_delay = SPICC_CAP_DELAY_1_CYCLE; + else if (hz >= 80000000) + cap_delay = SPICC_CAP_NO_DELAY; + else if (hz >= 40000000) + cap_delay = SPICC_CAP_AHEAD_1_CYCLE; + else if (div >= 16) + mi_delay = SPICC_MI_DELAY_3_CYCLE; + else if (div >= 8) + mi_delay = SPICC_MI_DELAY_2_CYCLE; + else if (div >= 6) + mi_delay = SPICC_MI_DELAY_1_CYCLE; + + conf = readl_relaxed(spicc->base + SPICC_TESTREG); + conf &= ~(SPICC_MO_DELAY_MASK | SPICC_MI_DELAY_MASK + | SPICC_MI_CAP_DELAY_MASK); + conf |= FIELD_PREP(SPICC_MI_DELAY_MASK, mi_delay); + conf |= FIELD_PREP(SPICC_MI_CAP_DELAY_MASK, cap_delay); + writel_relaxed(conf, spicc->base + SPICC_TESTREG); } static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, @@ -339,9 +344,6 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Read original configuration */ conf = conf_orig = readl_relaxed(spicc->base + SPICC_CONREG); - /* Select closest divider */ - conf = meson_spicc_setup_speed(spicc, conf, xfer->speed_hz); - /* Setup word width */ conf &= ~SPICC_BITLENGTH_MASK; conf |= FIELD_PREP(SPICC_BITLENGTH_MASK, @@ -350,6 +352,32 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Ignore if unchanged */ if (conf != conf_orig) writel_relaxed(conf, spicc->base + SPICC_CONREG); + + clk_set_rate(spicc->clk, xfer->speed_hz); + + meson_spicc_auto_io_delay(spicc); + + writel_relaxed(0, spicc->base + SPICC_DMAREG); +} + +static void meson_spicc_reset_fifo(struct meson_spicc_device *spicc) +{ + u32 data; + + if (spicc->data->has_oen) + writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, + SPICC_ENH_MAIN_CLK_AO, + spicc->base + SPICC_ENH_CTL0); + + writel_bits_relaxed(SPICC_FIFORST_W1_MASK, SPICC_FIFORST_W1_MASK, + spicc->base + SPICC_TESTREG); + + while (meson_spicc_rxready(spicc)) + data = readl_relaxed(spicc->base + SPICC_RXDATA); + + if (spicc->data->has_oen) + writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, 0, + spicc->base + SPICC_ENH_CTL0); } static int meson_spicc_transfer_one(struct spi_master *master, @@ -357,8 +385,6 @@ static int meson_spicc_transfer_one(struct spi_master *master, struct spi_transfer *xfer) { struct meson_spicc_device *spicc = spi_master_get_devdata(master); - unsigned int burst_len; - u32 irq = 0; /* Store current transfer */ spicc->xfer = xfer; @@ -372,22 +398,22 @@ static int meson_spicc_transfer_one(struct spi_master *master, spicc->bytes_per_word = DIV_ROUND_UP(spicc->xfer->bits_per_word, 8); + if (xfer->len % spicc->bytes_per_word) + return -EINVAL; + /* Setup transfer parameters */ meson_spicc_setup_xfer(spicc, xfer); - burst_len = min_t(unsigned int, - spicc->xfer_remain / spicc->bytes_per_word, - SPICC_BURST_MAX); + meson_spicc_reset_fifo(spicc); - meson_spicc_setup_burst(spicc, burst_len); - - irq = meson_spicc_setup_rx_irq(spicc, irq); + /* Setup burst */ + meson_spicc_setup_burst(spicc); /* Start burst */ writel_bits_relaxed(SPICC_XCH, SPICC_XCH, spicc->base + SPICC_CONREG); /* Enable interrupts */ - writel_relaxed(irq, spicc->base + SPICC_INTREG); + writel_relaxed(SPICC_TC_EN, spicc->base + SPICC_INTREG); return 1; } @@ -444,7 +470,7 @@ static int meson_spicc_prepare_message(struct spi_master *master, /* Setup no wait cycles by default */ writel_relaxed(0, spicc->base + SPICC_PERIODREG); - writel_bits_relaxed(BIT(24), BIT(24), spicc->base + SPICC_TESTREG); + writel_bits_relaxed(SPICC_LBC_W1, 0, spicc->base + SPICC_TESTREG); return 0; } @@ -456,9 +482,6 @@ static int meson_spicc_unprepare_transfer(struct spi_master *master) /* Disable all IRQs */ writel(0, spicc->base + SPICC_INTREG); - /* Disable controller */ - writel_bits_relaxed(SPICC_ENABLE, 0, spicc->base + SPICC_CONREG); - device_reset_optional(&spicc->pdev->dev); return 0; @@ -477,11 +500,167 @@ static void meson_spicc_cleanup(struct spi_device *spi) spi->controller_state = NULL; } +/* + * The Clock Mux + * x-----------------x x------------x x------\ + * |---| pow2 fixed div |---| pow2 div |----| | + * | x-----------------x x------------x | | + * src ---| | mux |-- out + * | x-----------------x x------------x | | + * |---| enh fixed div |---| enh div |0---| | + * x-----------------x x------------x x------/ + * + * Clk path for GX series: + * src -> pow2 fixed div -> pow2 div -> out + * + * Clk path for AXG series: + * src -> pow2 fixed div -> pow2 div -> mux -> out + * src -> enh fixed div -> enh div -> mux -> out + * + * Clk path for G12A series: + * pclk -> pow2 fixed div -> pow2 div -> mux -> out + * pclk -> enh fixed div -> enh div -> mux -> out + */ + +static int meson_spicc_clk_init(struct meson_spicc_device *spicc) +{ + struct device *dev = &spicc->pdev->dev; + struct clk_fixed_factor *pow2_fixed_div, *enh_fixed_div; + struct clk_divider *pow2_div, *enh_div; + struct clk_mux *mux; + struct clk_init_data init; + struct clk *clk; + struct clk_parent_data parent_data[2]; + char name[64]; + + memset(&init, 0, sizeof(init)); + memset(&parent_data, 0, sizeof(parent_data)); + + init.parent_data = parent_data; + + /* algorithm for pow2 div: rate = freq / 4 / (2 ^ N) */ + + pow2_fixed_div = devm_kzalloc(dev, sizeof(*pow2_fixed_div), GFP_KERNEL); + if (!pow2_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + if (spicc->data->has_pclk) + parent_data[0].hw = __clk_get_hw(spicc->pclk); + else + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + pow2_fixed_div->mult = 1, + pow2_fixed_div->div = 4, + pow2_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + pow2_div = devm_kzalloc(dev, sizeof(*pow2_div), GFP_KERNEL); + if (!pow2_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &pow2_fixed_div->hw; + init.num_parents = 1; + + pow2_div->shift = 16, + pow2_div->width = 3, + pow2_div->flags = CLK_DIVIDER_POWER_OF_TWO, + pow2_div->reg = spicc->base + SPICC_CONREG; + pow2_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + if (!spicc->data->has_enhance_clk_div) { + spicc->clk = clk; + return 0; + } + + /* algorithm for enh div: rate = freq / 2 / (N + 1) */ + + enh_fixed_div = devm_kzalloc(dev, sizeof(*enh_fixed_div), GFP_KERNEL); + if (!enh_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + if (spicc->data->has_pclk) + parent_data[0].hw = __clk_get_hw(spicc->pclk); + else + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + enh_fixed_div->mult = 1, + enh_fixed_div->div = 2, + enh_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + enh_div = devm_kzalloc(dev, sizeof(*enh_div), GFP_KERNEL); + if (!enh_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &enh_fixed_div->hw; + init.num_parents = 1; + + enh_div->shift = 16, + enh_div->width = 8, + enh_div->reg = spicc->base + SPICC_ENH_CTL0; + enh_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#sel", dev_name(dev)); + init.name = name; + init.ops = &clk_mux_ops; + parent_data[0].hw = &pow2_div->hw; + parent_data[1].hw = &enh_div->hw; + init.num_parents = 2; + init.flags = CLK_SET_RATE_PARENT; + + mux->mask = 0x1, + mux->shift = 24, + mux->reg = spicc->base + SPICC_ENH_CTL0; + mux->hw.init = &init; + + spicc->clk = devm_clk_register(dev, &mux->hw); + if (WARN_ON(IS_ERR(spicc->clk))) + return PTR_ERR(spicc->clk); + + return 0; +} + static int meson_spicc_probe(struct platform_device *pdev) { struct spi_master *master; struct meson_spicc_device *spicc; - int ret, irq, rate; + int ret, irq; master = spi_alloc_master(&pdev->dev, sizeof(*spicc)); if (!master) { @@ -491,6 +670,13 @@ static int meson_spicc_probe(struct platform_device *pdev) spicc = spi_master_get_devdata(master); spicc->master = master; + spicc->data = of_device_get_match_data(&pdev->dev); + if (!spicc->data) { + dev_err(&pdev->dev, "failed to get match data\n"); + ret = -EINVAL; + goto out_master; + } + spicc->pdev = pdev; platform_set_drvdata(pdev, spicc); @@ -501,6 +687,10 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_master; } + /* Set master mode and enable controller */ + writel_relaxed(SPICC_ENABLE | SPICC_MODE_MASTER, + spicc->base + SPICC_CONREG); + /* Disable all IRQs */ writel_relaxed(0, spicc->base + SPICC_INTREG); @@ -519,12 +709,26 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_master; } + if (spicc->data->has_pclk) { + spicc->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(spicc->pclk)) { + dev_err(&pdev->dev, "pclk clock request failed\n"); + ret = PTR_ERR(spicc->pclk); + goto out_master; + } + } + ret = clk_prepare_enable(spicc->core); if (ret) { dev_err(&pdev->dev, "core clock enable failed\n"); goto out_master; } - rate = clk_get_rate(spicc->core); + + ret = clk_prepare_enable(spicc->pclk); + if (ret) { + dev_err(&pdev->dev, "pclk clock enable failed\n"); + goto out_master; + } device_reset_optional(&pdev->dev); @@ -536,7 +740,8 @@ static int meson_spicc_probe(struct platform_device *pdev) SPI_BPW_MASK(16) | SPI_BPW_MASK(8); master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX); - master->min_speed_hz = rate >> 9; + master->min_speed_hz = spicc->data->min_speed_hz; + master->max_speed_hz = spicc->data->max_speed_hz; master->setup = meson_spicc_setup; master->cleanup = meson_spicc_cleanup; master->prepare_message = meson_spicc_prepare_message; @@ -544,11 +749,13 @@ static int meson_spicc_probe(struct platform_device *pdev) master->transfer_one = meson_spicc_transfer_one; master->use_gpio_descriptors = true; - /* Setup max rate according to the Meson GX datasheet */ - if ((rate >> 2) > SPICC_MAX_FREQ) - master->max_speed_hz = SPICC_MAX_FREQ; - else - master->max_speed_hz = rate >> 2; + meson_spicc_oen_enable(spicc); + + ret = meson_spicc_clk_init(spicc); + if (ret) { + dev_err(&pdev->dev, "clock registration failed\n"); + goto out_master; + } ret = devm_spi_register_master(&pdev->dev, master); if (ret) { @@ -560,6 +767,7 @@ static int meson_spicc_probe(struct platform_device *pdev) out_clk: clk_disable_unprepare(spicc->core); + clk_disable_unprepare(spicc->pclk); out_master: spi_master_put(master); @@ -575,13 +783,47 @@ static int meson_spicc_remove(struct platform_device *pdev) writel(0, spicc->base + SPICC_CONREG); clk_disable_unprepare(spicc->core); + clk_disable_unprepare(spicc->pclk); return 0; } +static const struct meson_spicc_data meson_spicc_gx_data = { + .max_speed_hz = 30000000, + .min_speed_hz = 325000, + .fifo_size = 16, +}; + +static const struct meson_spicc_data meson_spicc_axg_data = { + .max_speed_hz = 80000000, + .min_speed_hz = 325000, + .fifo_size = 16, + .has_oen = true, + .has_enhance_clk_div = true, +}; + +static const struct meson_spicc_data meson_spicc_g12a_data = { + .max_speed_hz = 166666666, + .min_speed_hz = 50000, + .fifo_size = 15, + .has_oen = true, + .has_enhance_clk_div = true, + .has_pclk = true, +}; + static const struct of_device_id meson_spicc_of_match[] = { - { .compatible = "amlogic,meson-gx-spicc", }, - { .compatible = "amlogic,meson-axg-spicc", }, + { + .compatible = "amlogic,meson-gx-spicc", + .data = &meson_spicc_gx_data, + }, + { + .compatible = "amlogic,meson-axg-spicc", + .data = &meson_spicc_axg_data, + }, + { + .compatible = "amlogic,meson-g12a-spicc", + .data = &meson_spicc_g12a_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, meson_spicc_of_match); diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c new file mode 100644 index 000000000000..c15a9910549f --- /dev/null +++ b/drivers/spi/spi-mtk-nor.c @@ -0,0 +1,689 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Mediatek SPI NOR controller driver +// +// Copyright (C) 2020 Chuanhong Guo <gch981213@gmail.com> + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> +#include <linux/string.h> + +#define DRIVER_NAME "mtk-spi-nor" + +#define MTK_NOR_REG_CMD 0x00 +#define MTK_NOR_CMD_WRITE BIT(4) +#define MTK_NOR_CMD_PROGRAM BIT(2) +#define MTK_NOR_CMD_READ BIT(0) +#define MTK_NOR_CMD_MASK GENMASK(5, 0) + +#define MTK_NOR_REG_PRG_CNT 0x04 +#define MTK_NOR_REG_RDATA 0x0c + +#define MTK_NOR_REG_RADR0 0x10 +#define MTK_NOR_REG_RADR(n) (MTK_NOR_REG_RADR0 + 4 * (n)) +#define MTK_NOR_REG_RADR3 0xc8 + +#define MTK_NOR_REG_WDATA 0x1c + +#define MTK_NOR_REG_PRGDATA0 0x20 +#define MTK_NOR_REG_PRGDATA(n) (MTK_NOR_REG_PRGDATA0 + 4 * (n)) +#define MTK_NOR_REG_PRGDATA_MAX 5 + +#define MTK_NOR_REG_SHIFT0 0x38 +#define MTK_NOR_REG_SHIFT(n) (MTK_NOR_REG_SHIFT0 + 4 * (n)) +#define MTK_NOR_REG_SHIFT_MAX 9 + +#define MTK_NOR_REG_CFG1 0x60 +#define MTK_NOR_FAST_READ BIT(0) + +#define MTK_NOR_REG_CFG2 0x64 +#define MTK_NOR_WR_CUSTOM_OP_EN BIT(4) +#define MTK_NOR_WR_BUF_EN BIT(0) + +#define MTK_NOR_REG_PP_DATA 0x98 + +#define MTK_NOR_REG_IRQ_STAT 0xa8 +#define MTK_NOR_REG_IRQ_EN 0xac +#define MTK_NOR_IRQ_DMA BIT(7) +#define MTK_NOR_IRQ_MASK GENMASK(7, 0) + +#define MTK_NOR_REG_CFG3 0xb4 +#define MTK_NOR_DISABLE_WREN BIT(7) +#define MTK_NOR_DISABLE_SR_POLL BIT(5) + +#define MTK_NOR_REG_WP 0xc4 +#define MTK_NOR_ENABLE_SF_CMD 0x30 + +#define MTK_NOR_REG_BUSCFG 0xcc +#define MTK_NOR_4B_ADDR BIT(4) +#define MTK_NOR_QUAD_ADDR BIT(3) +#define MTK_NOR_QUAD_READ BIT(2) +#define MTK_NOR_DUAL_ADDR BIT(1) +#define MTK_NOR_DUAL_READ BIT(0) +#define MTK_NOR_BUS_MODE_MASK GENMASK(4, 0) + +#define MTK_NOR_REG_DMA_CTL 0x718 +#define MTK_NOR_DMA_START BIT(0) + +#define MTK_NOR_REG_DMA_FADR 0x71c +#define MTK_NOR_REG_DMA_DADR 0x720 +#define MTK_NOR_REG_DMA_END_DADR 0x724 + +#define MTK_NOR_PRG_MAX_SIZE 6 +// Reading DMA src/dst addresses have to be 16-byte aligned +#define MTK_NOR_DMA_ALIGN 16 +#define MTK_NOR_DMA_ALIGN_MASK (MTK_NOR_DMA_ALIGN - 1) +// and we allocate a bounce buffer if destination address isn't aligned. +#define MTK_NOR_BOUNCE_BUF_SIZE PAGE_SIZE + +// Buffered page program can do one 128-byte transfer +#define MTK_NOR_PP_SIZE 128 + +#define CLK_TO_US(sp, clkcnt) ((clkcnt) * 1000000 / sp->spi_freq) + +struct mtk_nor { + struct spi_controller *ctlr; + struct device *dev; + void __iomem *base; + u8 *buffer; + struct clk *spi_clk; + struct clk *ctlr_clk; + unsigned int spi_freq; + bool wbuf_en; + bool has_irq; + struct completion op_done; +}; + +static inline void mtk_nor_rmw(struct mtk_nor *sp, u32 reg, u32 set, u32 clr) +{ + u32 val = readl(sp->base + reg); + + val &= ~clr; + val |= set; + writel(val, sp->base + reg); +} + +static inline int mtk_nor_cmd_exec(struct mtk_nor *sp, u32 cmd, ulong clk) +{ + ulong delay = CLK_TO_US(sp, clk); + u32 reg; + int ret; + + writel(cmd, sp->base + MTK_NOR_REG_CMD); + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CMD, reg, !(reg & cmd), + delay / 3, (delay + 1) * 200); + if (ret < 0) + dev_err(sp->dev, "command %u timeout.\n", cmd); + return ret; +} + +static void mtk_nor_set_addr(struct mtk_nor *sp, const struct spi_mem_op *op) +{ + u32 addr = op->addr.val; + int i; + + for (i = 0; i < 3; i++) { + writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR(i)); + addr >>= 8; + } + if (op->addr.nbytes == 4) { + writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR3); + mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, MTK_NOR_4B_ADDR, 0); + } else { + mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, 0, MTK_NOR_4B_ADDR); + } +} + +static bool mtk_nor_match_read(const struct spi_mem_op *op) +{ + int dummy = 0; + + if (op->dummy.buswidth) + dummy = op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth; + + if ((op->data.buswidth == 2) || (op->data.buswidth == 4)) { + if (op->addr.buswidth == 1) + return dummy == 8; + else if (op->addr.buswidth == 2) + return dummy == 4; + else if (op->addr.buswidth == 4) + return dummy == 6; + } else if ((op->addr.buswidth == 1) && (op->data.buswidth == 1)) { + if (op->cmd.opcode == 0x03) + return dummy == 0; + else if (op->cmd.opcode == 0x0b) + return dummy == 8; + } + return false; +} + +static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + size_t len; + + if (!op->data.nbytes) + return 0; + + if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) { + if ((op->data.dir == SPI_MEM_DATA_IN) && + mtk_nor_match_read(op)) { + if ((op->addr.val & MTK_NOR_DMA_ALIGN_MASK) || + (op->data.nbytes < MTK_NOR_DMA_ALIGN)) + op->data.nbytes = 1; + else if (!((ulong)(op->data.buf.in) & + MTK_NOR_DMA_ALIGN_MASK)) + op->data.nbytes &= ~MTK_NOR_DMA_ALIGN_MASK; + else if (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE) + op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE; + return 0; + } else if (op->data.dir == SPI_MEM_DATA_OUT) { + if (op->data.nbytes >= MTK_NOR_PP_SIZE) + op->data.nbytes = MTK_NOR_PP_SIZE; + else + op->data.nbytes = 1; + return 0; + } + } + + len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes - + op->dummy.nbytes; + if (op->data.nbytes > len) + op->data.nbytes = len; + + return 0; +} + +static bool mtk_nor_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + size_t len; + + if (op->cmd.buswidth != 1) + return false; + + if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) { + if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) + return true; + else if (op->data.dir == SPI_MEM_DATA_OUT) + return (op->addr.buswidth == 1) && + (op->dummy.buswidth == 0) && + (op->data.buswidth == 1); + } + len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; + if ((len > MTK_NOR_PRG_MAX_SIZE) || + ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE))) + return false; + return true; +} + +static void mtk_nor_setup_bus(struct mtk_nor *sp, const struct spi_mem_op *op) +{ + u32 reg = 0; + + if (op->addr.nbytes == 4) + reg |= MTK_NOR_4B_ADDR; + + if (op->data.buswidth == 4) { + reg |= MTK_NOR_QUAD_READ; + writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(4)); + if (op->addr.buswidth == 4) + reg |= MTK_NOR_QUAD_ADDR; + } else if (op->data.buswidth == 2) { + reg |= MTK_NOR_DUAL_READ; + writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(3)); + if (op->addr.buswidth == 2) + reg |= MTK_NOR_DUAL_ADDR; + } else { + if (op->cmd.opcode == 0x0b) + mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, MTK_NOR_FAST_READ, 0); + else + mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, 0, MTK_NOR_FAST_READ); + } + mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, reg, MTK_NOR_BUS_MODE_MASK); +} + +static int mtk_nor_read_dma(struct mtk_nor *sp, u32 from, unsigned int length, + u8 *buffer) +{ + int ret = 0; + ulong delay; + u32 reg; + dma_addr_t dma_addr; + + dma_addr = dma_map_single(sp->dev, buffer, length, DMA_FROM_DEVICE); + if (dma_mapping_error(sp->dev, dma_addr)) { + dev_err(sp->dev, "failed to map dma buffer.\n"); + return -EINVAL; + } + + writel(from, sp->base + MTK_NOR_REG_DMA_FADR); + writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR); + writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR); + + if (sp->has_irq) { + reinit_completion(&sp->op_done); + mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0); + } + + mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0); + + delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE); + + if (sp->has_irq) { + if (!wait_for_completion_timeout(&sp->op_done, + (delay + 1) * 100)) + ret = -ETIMEDOUT; + } else { + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg, + !(reg & MTK_NOR_DMA_START), delay / 3, + (delay + 1) * 100); + } + + dma_unmap_single(sp->dev, dma_addr, length, DMA_FROM_DEVICE); + if (ret < 0) + dev_err(sp->dev, "dma read timeout.\n"); + + return ret; +} + +static int mtk_nor_read_bounce(struct mtk_nor *sp, u32 from, + unsigned int length, u8 *buffer) +{ + unsigned int rdlen; + int ret; + + if (length & MTK_NOR_DMA_ALIGN_MASK) + rdlen = (length + MTK_NOR_DMA_ALIGN) & ~MTK_NOR_DMA_ALIGN_MASK; + else + rdlen = length; + + ret = mtk_nor_read_dma(sp, from, rdlen, sp->buffer); + if (ret) + return ret; + + memcpy(buffer, sp->buffer, length); + return 0; +} + +static int mtk_nor_read_pio(struct mtk_nor *sp, const struct spi_mem_op *op) +{ + u8 *buf = op->data.buf.in; + int ret; + + ret = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_READ, 6 * BITS_PER_BYTE); + if (!ret) + buf[0] = readb(sp->base + MTK_NOR_REG_RDATA); + return ret; +} + +static int mtk_nor_write_buffer_enable(struct mtk_nor *sp) +{ + int ret; + u32 val; + + if (sp->wbuf_en) + return 0; + + val = readl(sp->base + MTK_NOR_REG_CFG2); + writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, + val & MTK_NOR_WR_BUF_EN, 0, 10000); + if (!ret) + sp->wbuf_en = true; + return ret; +} + +static int mtk_nor_write_buffer_disable(struct mtk_nor *sp) +{ + int ret; + u32 val; + + if (!sp->wbuf_en) + return 0; + val = readl(sp->base + MTK_NOR_REG_CFG2); + writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, + !(val & MTK_NOR_WR_BUF_EN), 0, 10000); + if (!ret) + sp->wbuf_en = false; + return ret; +} + +static int mtk_nor_pp_buffered(struct mtk_nor *sp, const struct spi_mem_op *op) +{ + const u8 *buf = op->data.buf.out; + u32 val; + int ret, i; + + ret = mtk_nor_write_buffer_enable(sp); + if (ret < 0) + return ret; + + for (i = 0; i < op->data.nbytes; i += 4) { + val = buf[i + 3] << 24 | buf[i + 2] << 16 | buf[i + 1] << 8 | + buf[i]; + writel(val, sp->base + MTK_NOR_REG_PP_DATA); + } + return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, + (op->data.nbytes + 5) * BITS_PER_BYTE); +} + +static int mtk_nor_pp_unbuffered(struct mtk_nor *sp, + const struct spi_mem_op *op) +{ + const u8 *buf = op->data.buf.out; + int ret; + + ret = mtk_nor_write_buffer_disable(sp); + if (ret < 0) + return ret; + writeb(buf[0], sp->base + MTK_NOR_REG_WDATA); + return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE); +} + +int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master); + int ret; + + if ((op->data.nbytes == 0) || + ((op->addr.nbytes != 3) && (op->addr.nbytes != 4))) + return -ENOTSUPP; + + if (op->data.dir == SPI_MEM_DATA_OUT) { + mtk_nor_set_addr(sp, op); + writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA0); + if (op->data.nbytes == MTK_NOR_PP_SIZE) + return mtk_nor_pp_buffered(sp, op); + return mtk_nor_pp_unbuffered(sp, op); + } + + if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) { + ret = mtk_nor_write_buffer_disable(sp); + if (ret < 0) + return ret; + mtk_nor_setup_bus(sp, op); + if (op->data.nbytes == 1) { + mtk_nor_set_addr(sp, op); + return mtk_nor_read_pio(sp, op); + } else if (((ulong)(op->data.buf.in) & + MTK_NOR_DMA_ALIGN_MASK)) { + return mtk_nor_read_bounce(sp, op->addr.val, + op->data.nbytes, + op->data.buf.in); + } else { + return mtk_nor_read_dma(sp, op->addr.val, + op->data.nbytes, + op->data.buf.in); + } + } + + return -ENOTSUPP; +} + +static int mtk_nor_setup(struct spi_device *spi) +{ + struct mtk_nor *sp = spi_controller_get_devdata(spi->master); + + if (spi->max_speed_hz && (spi->max_speed_hz < sp->spi_freq)) { + dev_err(&spi->dev, "spi clock should be %u Hz.\n", + sp->spi_freq); + return -EINVAL; + } + spi->max_speed_hz = sp->spi_freq; + + return 0; +} + +static int mtk_nor_transfer_one_message(struct spi_controller *master, + struct spi_message *m) +{ + struct mtk_nor *sp = spi_controller_get_devdata(master); + struct spi_transfer *t = NULL; + unsigned long trx_len = 0; + int stat = 0; + int reg_offset = MTK_NOR_REG_PRGDATA_MAX; + void __iomem *reg; + const u8 *txbuf; + u8 *rxbuf; + int i; + + list_for_each_entry(t, &m->transfers, transfer_list) { + txbuf = t->tx_buf; + for (i = 0; i < t->len; i++, reg_offset--) { + reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset); + if (txbuf) + writeb(txbuf[i], reg); + else + writeb(0, reg); + } + trx_len += t->len; + } + + writel(trx_len * BITS_PER_BYTE, sp->base + MTK_NOR_REG_PRG_CNT); + + stat = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_PROGRAM, + trx_len * BITS_PER_BYTE); + if (stat < 0) + goto msg_done; + + reg_offset = trx_len - 1; + list_for_each_entry(t, &m->transfers, transfer_list) { + rxbuf = t->rx_buf; + for (i = 0; i < t->len; i++, reg_offset--) { + reg = sp->base + MTK_NOR_REG_SHIFT(reg_offset); + if (rxbuf) + rxbuf[i] = readb(reg); + } + } + + m->actual_length = trx_len; +msg_done: + m->status = stat; + spi_finalize_current_message(master); + + return 0; +} + +static void mtk_nor_disable_clk(struct mtk_nor *sp) +{ + clk_disable_unprepare(sp->spi_clk); + clk_disable_unprepare(sp->ctlr_clk); +} + +static int mtk_nor_enable_clk(struct mtk_nor *sp) +{ + int ret; + + ret = clk_prepare_enable(sp->spi_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(sp->ctlr_clk); + if (ret) { + clk_disable_unprepare(sp->spi_clk); + return ret; + } + + return 0; +} + +static int mtk_nor_init(struct mtk_nor *sp) +{ + int ret; + + ret = mtk_nor_enable_clk(sp); + if (ret) + return ret; + + sp->spi_freq = clk_get_rate(sp->spi_clk); + + writel(MTK_NOR_ENABLE_SF_CMD, sp->base + MTK_NOR_REG_WP); + mtk_nor_rmw(sp, MTK_NOR_REG_CFG2, MTK_NOR_WR_CUSTOM_OP_EN, 0); + mtk_nor_rmw(sp, MTK_NOR_REG_CFG3, + MTK_NOR_DISABLE_WREN | MTK_NOR_DISABLE_SR_POLL, 0); + + return ret; +} + +static irqreturn_t mtk_nor_irq_handler(int irq, void *data) +{ + struct mtk_nor *sp = data; + u32 irq_status, irq_enabled; + + irq_status = readl(sp->base + MTK_NOR_REG_IRQ_STAT); + irq_enabled = readl(sp->base + MTK_NOR_REG_IRQ_EN); + // write status back to clear interrupt + writel(irq_status, sp->base + MTK_NOR_REG_IRQ_STAT); + + if (!(irq_status & irq_enabled)) + return IRQ_NONE; + + if (irq_status & MTK_NOR_IRQ_DMA) { + complete(&sp->op_done); + writel(0, sp->base + MTK_NOR_REG_IRQ_EN); + } + + return IRQ_HANDLED; +} + +static size_t mtk_max_msg_size(struct spi_device *spi) +{ + return MTK_NOR_PRG_MAX_SIZE; +} + +static const struct spi_controller_mem_ops mtk_nor_mem_ops = { + .adjust_op_size = mtk_nor_adjust_op_size, + .supports_op = mtk_nor_supports_op, + .exec_op = mtk_nor_exec_op +}; + +static const struct of_device_id mtk_nor_match[] = { + { .compatible = "mediatek,mt8173-nor" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk_nor_match); + +static int mtk_nor_probe(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct mtk_nor *sp; + void __iomem *base; + u8 *buffer; + struct clk *spi_clk, *ctlr_clk; + int ret, irq; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + spi_clk = devm_clk_get(&pdev->dev, "spi"); + if (IS_ERR(spi_clk)) + return PTR_ERR(spi_clk); + + ctlr_clk = devm_clk_get(&pdev->dev, "sf"); + if (IS_ERR(ctlr_clk)) + return PTR_ERR(ctlr_clk); + + buffer = devm_kmalloc(&pdev->dev, + MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN, + GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if ((ulong)buffer & MTK_NOR_DMA_ALIGN_MASK) + buffer = (u8 *)(((ulong)buffer + MTK_NOR_DMA_ALIGN) & + ~MTK_NOR_DMA_ALIGN_MASK); + + ctlr = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (!ctlr) { + dev_err(&pdev->dev, "failed to allocate spi controller\n"); + return -ENOMEM; + } + + ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + ctlr->dev.of_node = pdev->dev.of_node; + ctlr->max_message_size = mtk_max_msg_size; + ctlr->mem_ops = &mtk_nor_mem_ops; + ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->num_chipselect = 1; + ctlr->setup = mtk_nor_setup; + ctlr->transfer_one_message = mtk_nor_transfer_one_message; + + dev_set_drvdata(&pdev->dev, ctlr); + + sp = spi_controller_get_devdata(ctlr); + sp->base = base; + sp->buffer = buffer; + sp->has_irq = false; + sp->wbuf_en = false; + sp->ctlr = ctlr; + sp->dev = &pdev->dev; + sp->spi_clk = spi_clk; + sp->ctlr_clk = ctlr_clk; + + irq = platform_get_irq_optional(pdev, 0); + if (irq < 0) { + dev_warn(sp->dev, "IRQ not available."); + } else { + writel(MTK_NOR_IRQ_MASK, base + MTK_NOR_REG_IRQ_STAT); + writel(0, base + MTK_NOR_REG_IRQ_EN); + ret = devm_request_irq(sp->dev, irq, mtk_nor_irq_handler, 0, + pdev->name, sp); + if (ret < 0) { + dev_warn(sp->dev, "failed to request IRQ."); + } else { + init_completion(&sp->op_done); + sp->has_irq = true; + } + } + + ret = mtk_nor_init(sp); + if (ret < 0) { + kfree(ctlr); + return ret; + } + + dev_info(&pdev->dev, "spi frequency: %d Hz\n", sp->spi_freq); + + return devm_spi_register_controller(&pdev->dev, ctlr); +} + +static int mtk_nor_remove(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct mtk_nor *sp; + + ctlr = dev_get_drvdata(&pdev->dev); + sp = spi_controller_get_devdata(ctlr); + + mtk_nor_disable_clk(sp); + + return 0; +} + +static struct platform_driver mtk_nor_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = mtk_nor_match, + }, + .probe = mtk_nor_probe, + .remove = mtk_nor_remove, +}; + +module_platform_driver(mtk_nor_driver); + +MODULE_DESCRIPTION("Mediatek SPI NOR controller driver"); +MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c new file mode 100644 index 000000000000..4f94c9127fc1 --- /dev/null +++ b/drivers/spi/spi-mux.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// General Purpose SPI multiplexer + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mux/consumer.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> + +#define SPI_MUX_NO_CS ((unsigned int)-1) + +/** + * DOC: Driver description + * + * This driver supports a MUX on an SPI bus. This can be useful when you need + * more chip selects than the hardware peripherals support, or than are + * available in a particular board setup. + * + * The driver will create an additional SPI controller. Devices added under the + * mux will be handled as 'chip selects' on this controller. + */ + +/** + * struct spi_mux_priv - the basic spi_mux structure + * @spi: pointer to the device struct attached to the parent + * spi controller + * @current_cs: The current chip select set in the mux + * @child_msg_complete: The mux replaces the complete callback in the child's + * message to its own callback; this field is used by the + * driver to store the child's callback during a transfer + * @child_msg_context: Used to store the child's context to the callback + * @child_msg_dev: Used to store the spi_device pointer to the child + * @mux: mux_control structure used to provide chip selects for + * downstream spi devices + */ +struct spi_mux_priv { + struct spi_device *spi; + unsigned int current_cs; + + void (*child_msg_complete)(void *context); + void *child_msg_context; + struct spi_device *child_msg_dev; + struct mux_control *mux; +}; + +/* should not get called when the parent controller is doing a transfer */ +static int spi_mux_select(struct spi_device *spi) +{ + struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); + int ret; + + if (priv->current_cs == spi->chip_select) + return 0; + + dev_dbg(&priv->spi->dev, "setting up the mux for cs %d\n", + spi->chip_select); + + /* copy the child device's settings except for the cs */ + priv->spi->max_speed_hz = spi->max_speed_hz; + priv->spi->mode = spi->mode; + priv->spi->bits_per_word = spi->bits_per_word; + + ret = mux_control_select(priv->mux, spi->chip_select); + if (ret) + return ret; + + priv->current_cs = spi->chip_select; + + return 0; +} + +static int spi_mux_setup(struct spi_device *spi) +{ + struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); + + /* + * can be called multiple times, won't do a valid setup now but we will + * change the settings when we do a transfer (necessary because we + * can't predict from which device it will be anyway) + */ + return spi_setup(priv->spi); +} + +static void spi_mux_complete_cb(void *context) +{ + struct spi_mux_priv *priv = (struct spi_mux_priv *)context; + struct spi_controller *ctlr = spi_get_drvdata(priv->spi); + struct spi_message *m = ctlr->cur_msg; + + m->complete = priv->child_msg_complete; + m->context = priv->child_msg_context; + m->spi = priv->child_msg_dev; + spi_finalize_current_message(ctlr); + mux_control_deselect(priv->mux); +} + +static int spi_mux_transfer_one_message(struct spi_controller *ctlr, + struct spi_message *m) +{ + struct spi_mux_priv *priv = spi_controller_get_devdata(ctlr); + struct spi_device *spi = m->spi; + int ret; + + ret = spi_mux_select(spi); + if (ret) + return ret; + + /* + * Replace the complete callback, context and spi_device with our own + * pointers. Save originals + */ + priv->child_msg_complete = m->complete; + priv->child_msg_context = m->context; + priv->child_msg_dev = m->spi; + + m->complete = spi_mux_complete_cb; + m->context = priv; + m->spi = priv->spi; + + /* do the transfer */ + return spi_async(priv->spi, m); +} + +static int spi_mux_probe(struct spi_device *spi) +{ + struct spi_controller *ctlr; + struct spi_mux_priv *priv; + int ret; + + ctlr = spi_alloc_master(&spi->dev, sizeof(*priv)); + if (!ctlr) + return -ENOMEM; + + spi_set_drvdata(spi, ctlr); + priv = spi_controller_get_devdata(ctlr); + priv->spi = spi; + + priv->mux = devm_mux_control_get(&spi->dev, NULL); + if (IS_ERR(priv->mux)) { + ret = PTR_ERR(priv->mux); + if (ret != -EPROBE_DEFER) + dev_err(&spi->dev, "failed to get control-mux\n"); + goto err_put_ctlr; + } + + priv->current_cs = SPI_MUX_NO_CS; + + /* supported modes are the same as our parent's */ + ctlr->mode_bits = spi->controller->mode_bits; + ctlr->flags = spi->controller->flags; + ctlr->transfer_one_message = spi_mux_transfer_one_message; + ctlr->setup = spi_mux_setup; + ctlr->num_chipselect = mux_control_states(priv->mux); + ctlr->bus_num = -1; + ctlr->dev.of_node = spi->dev.of_node; + + ret = devm_spi_register_controller(&spi->dev, ctlr); + if (ret) + goto err_put_ctlr; + + return 0; + +err_put_ctlr: + spi_controller_put(ctlr); + + return ret; +} + +static const struct of_device_id spi_mux_of_match[] = { + { .compatible = "spi-mux" }, + { } +}; + +static struct spi_driver spi_mux_driver = { + .probe = spi_mux_probe, + .driver = { + .name = "spi-mux", + .of_match_table = spi_mux_of_match, + }, +}; + +module_spi_driver(spi_mux_driver); + +MODULE_DESCRIPTION("SPI multiplexer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index dce85ee07cd0..918918a9e049 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -22,7 +22,6 @@ #include <linux/ioport.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/interrupt.h> @@ -32,7 +31,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/completion.h> -#include <linux/gpio.h> +#include <linux/pinctrl/consumer.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/module.h> diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index 8c5084a3a617..1ccda82da206 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -307,6 +307,7 @@ #define POLL_TOUT 5000 #define NXP_FSPI_MAX_CHIPSELECT 4 +#define NXP_FSPI_MIN_IOMAP SZ_4M struct nxp_fspi_devtype_data { unsigned int rxfifo; @@ -324,11 +325,29 @@ static const struct nxp_fspi_devtype_data lx2160a_data = { .little_endian = true, /* little-endian */ }; +static const struct nxp_fspi_devtype_data imx8mm_data = { + .rxfifo = SZ_512, /* (64 * 64 bits) */ + .txfifo = SZ_1K, /* (128 * 64 bits) */ + .ahb_buf_size = SZ_2K, /* (256 * 64 bits) */ + .quirks = 0, + .little_endian = true, /* little-endian */ +}; + +static const struct nxp_fspi_devtype_data imx8qxp_data = { + .rxfifo = SZ_512, /* (64 * 64 bits) */ + .txfifo = SZ_1K, /* (128 * 64 bits) */ + .ahb_buf_size = SZ_2K, /* (256 * 64 bits) */ + .quirks = 0, + .little_endian = true, /* little-endian */ +}; + struct nxp_fspi { void __iomem *iobase; void __iomem *ahb_addr; u32 memmap_phy; u32 memmap_phy_size; + u32 memmap_start; + u32 memmap_len; struct clk *clk, *clk_en; struct device *dev; struct completion c; @@ -641,12 +660,35 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi) f->selected = spi->chip_select; } -static void nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op) +static int nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op) { + u32 start = op->addr.val; u32 len = op->data.nbytes; + /* if necessary, ioremap before AHB read */ + if ((!f->ahb_addr) || start < f->memmap_start || + start + len > f->memmap_start + f->memmap_len) { + if (f->ahb_addr) + iounmap(f->ahb_addr); + + f->memmap_start = start; + f->memmap_len = len > NXP_FSPI_MIN_IOMAP ? + len : NXP_FSPI_MIN_IOMAP; + + f->ahb_addr = ioremap_wc(f->memmap_phy + f->memmap_start, + f->memmap_len); + + if (!f->ahb_addr) { + dev_err(f->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + } + /* Read out the data directly from the AHB buffer. */ - memcpy_fromio(op->data.buf.in, (f->ahb_addr + op->addr.val), len); + memcpy_fromio(op->data.buf.in, + f->ahb_addr + start - f->memmap_start, len); + + return 0; } static void nxp_fspi_fill_txfifo(struct nxp_fspi *f, @@ -806,7 +848,7 @@ static int nxp_fspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) */ if (op->data.nbytes > (f->devtype_data->rxfifo - 4) && op->data.dir == SPI_MEM_DATA_IN) { - nxp_fspi_read_ahb(f, op); + err = nxp_fspi_read_ahb(f, op); } else { if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) nxp_fspi_fill_txfifo(f, op); @@ -871,8 +913,9 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f) fspi_writel(f, FSPI_DLLBCR_OVRDEN, base + FSPI_DLLBCR); /* enable module */ - fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) | FSPI_MCR0_IP_TIMEOUT(0xFF), - base + FSPI_MCR0); + fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) | + FSPI_MCR0_IP_TIMEOUT(0xFF) | (u32) FSPI_MCR0_OCTCOMB_EN, + base + FSPI_MCR0); /* * Disable same device enable bit and configure all slave devices @@ -976,9 +1019,8 @@ static int nxp_fspi_probe(struct platform_device *pdev) /* find the resources - controller memory mapped space */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fspi_mmap"); - f->ahb_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(f->ahb_addr)) { - ret = PTR_ERR(f->ahb_addr); + if (!res) { + ret = -ENODEV; goto err_put_ctrl; } @@ -1057,6 +1099,9 @@ static int nxp_fspi_remove(struct platform_device *pdev) mutex_destroy(&f->lock); + if (f->ahb_addr) + iounmap(f->ahb_addr); + return 0; } @@ -1076,6 +1121,8 @@ static int nxp_fspi_resume(struct device *dev) static const struct of_device_id nxp_fspi_dt_ids[] = { { .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, }, + { .compatible = "nxp,imx8mm-fspi", .data = (void *)&imx8mm_data, }, + { .compatible = "nxp,imx8qxp-fspi", .data = (void *)&imx8qxp_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2e318158fca9..73d2a65d0b6e 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -192,6 +192,11 @@ static bool is_quark_x1000_ssp(const struct driver_data *drv_data) return drv_data->ssp_type == QUARK_X1000_SSP; } +static bool is_mmp2_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == MMP2_SSP; +} + static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data) { switch (drv_data->ssp_type) { @@ -486,8 +491,8 @@ int pxa2xx_spi_flush(struct driver_data *drv_data) static void pxa2xx_spi_off(struct driver_data *drv_data) { - /* On MMP, disabling SSE seems to corrupt the rx fifo */ - if (drv_data->ssp_type == MMP2_SSP) + /* On MMP, disabling SSE seems to corrupt the Rx FIFO */ + if (is_mmp2_ssp(drv_data)) return; pxa2xx_spi_write(drv_data, SSCR0, @@ -1093,7 +1098,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, || (pxa2xx_spi_read(drv_data, SSCR1) & change_mask) != (cr1 & change_mask)) { /* stop the SSP, and update the other bits */ - if (drv_data->ssp_type != MMP2_SSP) + if (!is_mmp2_ssp(drv_data)) pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE); if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, chip->timeout); @@ -1107,7 +1112,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, pxa2xx_spi_write(drv_data, SSTO, chip->timeout); } - if (drv_data->ssp_type == MMP2_SSP) { + if (is_mmp2_ssp(drv_data)) { u8 tx_level = (pxa2xx_spi_read(drv_data, SSSR) & SSSR_TFL_MASK) >> 8; @@ -1571,18 +1576,18 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) else if (pcidev_id) type = (enum pxa_ssp_type)pcidev_id->driver_data; else - return NULL; + return ERR_PTR(-EINVAL); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) - return NULL; + return ERR_PTR(-ENOMEM); ssp = &pdata->ssp; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(ssp->mmio_base)) - return NULL; + return ERR_CAST(ssp->mmio_base); ssp->phys_base = res->start; @@ -1596,11 +1601,11 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) ssp->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(ssp->clk)) - return NULL; + return ERR_CAST(ssp->clk); ssp->irq = platform_get_irq(pdev, 0); if (ssp->irq < 0) - return NULL; + return ERR_PTR(ssp->irq); ssp->type = type; ssp->dev = &pdev->dev; @@ -1657,9 +1662,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) platform_info = dev_get_platdata(dev); if (!platform_info) { platform_info = pxa2xx_spi_init_pdata(pdev); - if (!platform_info) { + if (IS_ERR(platform_info)) { dev_err(&pdev->dev, "missing platform data\n"); - return -ENODEV; + return PTR_ERR(platform_info); } } @@ -1907,11 +1912,7 @@ out_error_controller_alloc: static int pxa2xx_spi_remove(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); - struct ssp_device *ssp; - - if (!drv_data) - return 0; - ssp = drv_data->ssp; + struct ssp_device *ssp = drv_data->ssp; pm_runtime_get_sync(&pdev->dev); diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 2cc6d9951b52..70ef63e0b6b8 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -843,14 +843,17 @@ static const struct dev_pm_ops rockchip_spi_pm = { }; static const struct of_device_id rockchip_spi_dt_match[] = { - { .compatible = "rockchip,rv1108-spi", }, + { .compatible = "rockchip,px30-spi", }, { .compatible = "rockchip,rk3036-spi", }, { .compatible = "rockchip,rk3066-spi", }, { .compatible = "rockchip,rk3188-spi", }, { .compatible = "rockchip,rk3228-spi", }, { .compatible = "rockchip,rk3288-spi", }, + { .compatible = "rockchip,rk3308-spi", }, + { .compatible = "rockchip,rk3328-spi", }, { .compatible = "rockchip,rk3368-spi", }, { .compatible = "rockchip,rk3399-spi", }, + { .compatible = "rockchip,rv1108-spi", }, { }, }; MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match); diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 85575d45901c..06192c9ea813 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -24,6 +24,7 @@ #include <linux/sh_dma.h> #include <linux/spi/spi.h> #include <linux/spi/rspi.h> +#include <linux/spinlock.h> #define RSPI_SPCR 0x00 /* Control Register */ #define RSPI_SSLP 0x01 /* Slave Select Polarity Register */ @@ -79,8 +80,7 @@ #define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ /* SSLP - Slave Select Polarity Register */ -#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */ -#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */ +#define SSLP_SSLP(i) BIT(i) /* SSLi Signal Polarity Setting */ /* SPPCR - Pin Control Register */ #define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */ @@ -181,7 +181,9 @@ struct rspi_data { void __iomem *addr; u32 max_speed_hz; struct spi_controller *ctlr; + struct platform_device *pdev; wait_queue_head_t wait; + spinlock_t lock; /* Protects RMW-access to RSPI_SSLP */ struct clk *clk; u16 spcmd; u8 spsr; @@ -239,7 +241,7 @@ struct spi_ops { int (*set_config_register)(struct rspi_data *rspi, int access_size); int (*transfer_one)(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *xfer); - u16 mode_bits; + u16 extra_mode_bits; u16 flags; u16 fifo_size; u8 num_hw_ss; @@ -919,6 +921,29 @@ static int qspi_setup_sequencer(struct rspi_data *rspi, return 0; } +static int rspi_setup(struct spi_device *spi) +{ + struct rspi_data *rspi = spi_controller_get_devdata(spi->controller); + u8 sslp; + + if (spi->cs_gpiod) + return 0; + + pm_runtime_get_sync(&rspi->pdev->dev); + spin_lock_irq(&rspi->lock); + + sslp = rspi_read8(rspi, RSPI_SSLP); + if (spi->mode & SPI_CS_HIGH) + sslp |= SSLP_SSLP(spi->chip_select); + else + sslp &= ~SSLP_SSLP(spi->chip_select); + rspi_write8(rspi, sslp, RSPI_SSLP); + + spin_unlock_irq(&rspi->lock); + pm_runtime_put(&rspi->pdev->dev); + return 0; +} + static int rspi_prepare_message(struct spi_controller *ctlr, struct spi_message *msg) { @@ -933,6 +958,8 @@ static int rspi_prepare_message(struct spi_controller *ctlr, rspi->spcmd |= SPCMD_CPOL; if (spi->mode & SPI_CPHA) rspi->spcmd |= SPCMD_CPHA; + if (spi->mode & SPI_LSB_FIRST) + rspi->spcmd |= SPCMD_LSBF; /* Configure slave signal to assert */ rspi->spcmd |= SPCMD_SSLA(spi->cs_gpiod ? rspi->ctlr->unused_native_cs @@ -1122,7 +1149,6 @@ static int rspi_remove(struct platform_device *pdev) static const struct spi_ops rspi_ops = { .set_config_register = rspi_set_config_register, .transfer_one = rspi_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, .flags = SPI_CONTROLLER_MUST_TX, .fifo_size = 8, .num_hw_ss = 2, @@ -1131,7 +1157,6 @@ static const struct spi_ops rspi_ops = { static const struct spi_ops rspi_rz_ops = { .set_config_register = rspi_rz_set_config_register, .transfer_one = rspi_rz_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX, .fifo_size = 8, /* 8 for TX, 32 for RX */ .num_hw_ss = 1, @@ -1140,8 +1165,7 @@ static const struct spi_ops rspi_rz_ops = { static const struct spi_ops qspi_ops = { .set_config_register = qspi_set_config_register, .transfer_one = qspi_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | - SPI_TX_DUAL | SPI_TX_QUAD | + .extra_mode_bits = SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD, .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX, .fifo_size = 32, @@ -1249,16 +1273,20 @@ static int rspi_probe(struct platform_device *pdev) goto error1; } + rspi->pdev = pdev; pm_runtime_enable(&pdev->dev); init_waitqueue_head(&rspi->wait); + spin_lock_init(&rspi->lock); ctlr->bus_num = pdev->id; + ctlr->setup = rspi_setup; ctlr->auto_runtime_pm = true; ctlr->transfer_one = ops->transfer_one; ctlr->prepare_message = rspi_prepare_message; ctlr->unprepare_message = rspi_unprepare_message; - ctlr->mode_bits = ops->mode_bits; + ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST | + SPI_LOOP | ops->extra_mode_bits; ctlr->flags = ops->flags; ctlr->dev.of_node = pdev->dev.of_node; ctlr->use_gpio_descriptors = true; diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index 2d6e37f25e2d..2cb3b611c294 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -227,7 +227,7 @@ static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) struct spi_fiq_code { u32 length; u32 ack_offset; - u8 data[0]; + u8 data[]; }; extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 4ef569b47aa6..d066f5144c3e 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -565,7 +565,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) qspi->io_base = devm_ioremap_resource(dev, res); if (IS_ERR(qspi->io_base)) { ret = PTR_ERR(qspi->io_base); - goto err; + goto err_master_put; } qspi->phys_base = res->start; @@ -574,24 +574,26 @@ static int stm32_qspi_probe(struct platform_device *pdev) qspi->mm_base = devm_ioremap_resource(dev, res); if (IS_ERR(qspi->mm_base)) { ret = PTR_ERR(qspi->mm_base); - goto err; + goto err_master_put; } qspi->mm_size = resource_size(res); if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) { ret = -EINVAL; - goto err; + goto err_master_put; } irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + if (irq < 0) { + ret = irq; + goto err_master_put; + } ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0, dev_name(dev), qspi); if (ret) { dev_err(dev, "failed to request irq\n"); - goto err; + goto err_master_put; } init_completion(&qspi->data_completion); @@ -599,23 +601,27 @@ static int stm32_qspi_probe(struct platform_device *pdev) qspi->clk = devm_clk_get(dev, NULL); if (IS_ERR(qspi->clk)) { ret = PTR_ERR(qspi->clk); - goto err; + goto err_master_put; } qspi->clk_rate = clk_get_rate(qspi->clk); if (!qspi->clk_rate) { ret = -EINVAL; - goto err; + goto err_master_put; } ret = clk_prepare_enable(qspi->clk); if (ret) { dev_err(dev, "can not enable the clock\n"); - goto err; + goto err_master_put; } rstc = devm_reset_control_get_exclusive(dev, NULL); - if (!IS_ERR(rstc)) { + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + if (ret == -EPROBE_DEFER) + goto err_qspi_release; + } else { reset_control_assert(rstc); udelay(2); reset_control_deassert(rstc); @@ -625,7 +631,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qspi); ret = stm32_qspi_dma_setup(qspi); if (ret) - goto err; + goto err_qspi_release; mutex_init(&qspi->lock); @@ -641,8 +647,9 @@ static int stm32_qspi_probe(struct platform_device *pdev) if (!ret) return 0; -err: +err_qspi_release: stm32_qspi_release(qspi); +err_master_put: spi_master_put(qspi->ctrl); return ret; diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index e041f9c4ec47..44ac6eb3298d 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -175,7 +175,7 @@ #define SPI_DMA_MIN_BYTES 16 /** - * stm32_spi_reg - stm32 SPI register & bitfield desc + * struct stm32_spi_reg - stm32 SPI register & bitfield desc * @reg: register offset * @mask: bitfield mask * @shift: left shift @@ -187,16 +187,16 @@ struct stm32_spi_reg { }; /** - * stm32_spi_regspec - stm32 registers definition, compatible dependent data - * en: enable register and SPI enable bit - * dma_rx_en: SPI DMA RX enable register end SPI DMA RX enable bit - * dma_tx_en: SPI DMA TX enable register end SPI DMA TX enable bit - * cpol: clock polarity register and polarity bit - * cpha: clock phase register and phase bit - * lsb_first: LSB transmitted first register and bit - * br: baud rate register and bitfields - * rx: SPI RX data register - * tx: SPI TX data register + * struct stm32_spi_regspec - stm32 registers definition, compatible dependent data + * @en: enable register and SPI enable bit + * @dma_rx_en: SPI DMA RX enable register end SPI DMA RX enable bit + * @dma_tx_en: SPI DMA TX enable register end SPI DMA TX enable bit + * @cpol: clock polarity register and polarity bit + * @cpha: clock phase register and phase bit + * @lsb_first: LSB transmitted first register and bit + * @br: baud rate register and bitfields + * @rx: SPI RX data register + * @tx: SPI TX data register */ struct stm32_spi_regspec { const struct stm32_spi_reg en; @@ -213,7 +213,7 @@ struct stm32_spi_regspec { struct stm32_spi; /** - * stm32_spi_cfg - stm32 compatible configuration data + * struct stm32_spi_cfg - stm32 compatible configuration data * @regs: registers descriptions * @get_fifo_size: routine to get fifo size * @get_bpw_mask: routine to get bits per word mask @@ -223,13 +223,13 @@ struct stm32_spi; * @set_mode: routine to configure registers to desired mode * @set_data_idleness: optional routine to configure registers to desired idle * time between frames (if driver has this functionality) - * set_number_of_data: optional routine to configure registers to desired + * @set_number_of_data: optional routine to configure registers to desired * number of data (if driver has this functionality) * @can_dma: routine to determine if the transfer is eligible for DMA use * @transfer_one_dma_start: routine to start transfer a single spi_transfer * using DMA - * @dma_rx cb: routine to call after DMA RX channel operation is complete - * @dma_tx cb: routine to call after DMA TX channel operation is complete + * @dma_rx_cb: routine to call after DMA RX channel operation is complete + * @dma_tx_cb: routine to call after DMA TX channel operation is complete * @transfer_one_irq: routine to configure interrupts for driver * @irq_handler_event: Interrupt handler for SPI controller events * @irq_handler_thread: thread of interrupt handler for SPI controller @@ -587,6 +587,7 @@ static void stm32f4_spi_read_rx(struct stm32_spi *spi) /** * stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register * @spi: pointer to the spi controller data structure + * @flush: boolean indicating that FIFO should be flushed * * Write in rx_buf depends on remaining bytes to avoid to write beyond * rx_buf end. @@ -756,6 +757,9 @@ static void stm32h7_spi_disable(struct stm32_spi *spi) /** * stm32_spi_can_dma - Determine if the transfer is eligible for DMA use + * @master: controller master interface + * @spi_dev: pointer to the spi device + * @transfer: pointer to spi transfer * * If driver has fifo and the current transfer size is greater than fifo size, * use DMA. Otherwise use DMA for transfer longer than defined DMA min bytes. @@ -974,6 +978,8 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) /** * stm32_spi_prepare_msg - set up the controller to transfer a single message + * @master: controller master interface + * @msg: pointer to spi message */ static int stm32_spi_prepare_msg(struct spi_master *master, struct spi_message *msg) @@ -1026,6 +1032,7 @@ static int stm32_spi_prepare_msg(struct spi_master *master, /** * stm32f4_spi_dma_tx_cb - dma callback + * @data: pointer to the spi controller data structure * * DMA callback is called when the transfer is complete for DMA TX channel. */ @@ -1041,6 +1048,7 @@ static void stm32f4_spi_dma_tx_cb(void *data) /** * stm32f4_spi_dma_rx_cb - dma callback + * @data: pointer to the spi controller data structure * * DMA callback is called when the transfer is complete for DMA RX channel. */ @@ -1054,6 +1062,7 @@ static void stm32f4_spi_dma_rx_cb(void *data) /** * stm32h7_spi_dma_cb - dma callback + * @data: pointer to the spi controller data structure * * DMA callback is called when the transfer is complete or when an error * occurs. If the transfer is complete, EOT flag is raised. @@ -1079,6 +1088,9 @@ static void stm32h7_spi_dma_cb(void *data) /** * stm32_spi_dma_config - configure dma slave channel depending on current * transfer bits_per_word. + * @spi: pointer to the spi controller data structure + * @dma_conf: pointer to the dma_slave_config structure + * @dir: direction of the dma transfer */ static void stm32_spi_dma_config(struct stm32_spi *spi, struct dma_slave_config *dma_conf, @@ -1126,6 +1138,7 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, /** * stm32f4_spi_transfer_one_irq - transfer a single spi_transfer using * interrupts + * @spi: pointer to the spi controller data structure * * It must returns 0 if the transfer is finished or 1 if the transfer is still * in progress. @@ -1166,6 +1179,7 @@ static int stm32f4_spi_transfer_one_irq(struct stm32_spi *spi) /** * stm32h7_spi_transfer_one_irq - transfer a single spi_transfer using * interrupts + * @spi: pointer to the spi controller data structure * * It must returns 0 if the transfer is finished or 1 if the transfer is still * in progress. @@ -1207,6 +1221,7 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi) /** * stm32f4_spi_transfer_one_dma_start - Set SPI driver registers to start * transfer using DMA + * @spi: pointer to the spi controller data structure */ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi) { @@ -1227,6 +1242,7 @@ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi) /** * stm32h7_spi_transfer_one_dma_start - Set SPI driver registers to start * transfer using DMA + * @spi: pointer to the spi controller data structure */ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) { @@ -1243,6 +1259,8 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) /** * stm32_spi_transfer_one_dma - transfer a single spi_transfer using DMA + * @spi: pointer to the spi controller data structure + * @xfer: pointer to the spi_transfer structure * * It must returns 0 if the transfer is finished or 1 if the transfer is still * in progress. @@ -1405,7 +1423,7 @@ static void stm32_spi_set_mbr(struct stm32_spi *spi, u32 mbrdiv) /** * stm32_spi_communication_type - return transfer communication type * @spi_dev: pointer to the spi device - * transfer: pointer to spi transfer + * @transfer: pointer to spi transfer */ static unsigned int stm32_spi_communication_type(struct spi_device *spi_dev, struct spi_transfer *transfer) @@ -1522,7 +1540,7 @@ static void stm32h7_spi_data_idleness(struct stm32_spi *spi, u32 len) /** * stm32h7_spi_number_of_data - configure number of data at current transfer * @spi: pointer to the spi controller data structure - * @len: transfer length + * @nb_words: transfer length (in words) */ static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words) { @@ -1546,6 +1564,9 @@ static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words) * stm32_spi_transfer_one_setup - common setup to transfer a single * spi_transfer either using DMA or * interrupts. + * @spi: pointer to the spi controller data structure + * @spi_dev: pointer to the spi device + * @transfer: pointer to spi transfer */ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, struct spi_device *spi_dev, @@ -1625,6 +1646,9 @@ out: /** * stm32_spi_transfer_one - transfer a single spi_transfer + * @master: controller master interface + * @spi_dev: pointer to the spi device + * @transfer: pointer to spi transfer * * It must return 0 if the transfer is finished or 1 if the transfer is still * in progress. @@ -1658,6 +1682,8 @@ static int stm32_spi_transfer_one(struct spi_master *master, /** * stm32_spi_unprepare_msg - relax the hardware + * @master: controller master interface + * @msg: pointer to the spi message */ static int stm32_spi_unprepare_msg(struct spi_master *master, struct spi_message *msg) @@ -1671,6 +1697,7 @@ static int stm32_spi_unprepare_msg(struct spi_master *master, /** * stm32f4_spi_config - Configure SPI controller as SPI master + * @spi: pointer to the spi controller data structure */ static int stm32f4_spi_config(struct stm32_spi *spi) { @@ -1701,6 +1728,7 @@ static int stm32f4_spi_config(struct stm32_spi *spi) /** * stm32h7_spi_config - Configure SPI controller as SPI master + * @spi: pointer to the spi controller data structure */ static int stm32h7_spi_config(struct stm32_spi *spi) { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 755221bc3745..c92c89467e7e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -510,6 +510,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr) spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; spi->cs_gpio = -ENOENT; + spi->mode = ctlr->buswidth_override_bits; spin_lock_init(&spi->statistics.lock); @@ -1514,17 +1515,15 @@ void spi_take_timestamp_pre(struct spi_controller *ctlr, if (!xfer->ptp_sts) return; - if (xfer->timestamped_pre) + if (xfer->timestamped) return; - if (progress < xfer->ptp_sts_word_pre) + if (progress > xfer->ptp_sts_word_pre) return; /* Capture the resolution of the timestamp */ xfer->ptp_sts_word_pre = progress; - xfer->timestamped_pre = true; - if (irqs_off) { local_irq_save(ctlr->irq_flags); preempt_disable(); @@ -1553,7 +1552,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr, if (!xfer->ptp_sts) return; - if (xfer->timestamped_post) + if (xfer->timestamped) return; if (progress < xfer->ptp_sts_word_post) @@ -1569,7 +1568,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr, /* Capture the resolution of the timestamp */ xfer->ptp_sts_word_post = progress; - xfer->timestamped_post = true; + xfer->timestamped = true; } EXPORT_SYMBOL_GPL(spi_take_timestamp_post); @@ -1674,12 +1673,9 @@ void spi_finalize_current_message(struct spi_controller *ctlr) } } - if (unlikely(ctlr->ptp_sts_supported)) { - list_for_each_entry(xfer, &mesg->transfers, transfer_list) { - WARN_ON_ONCE(xfer->ptp_sts && !xfer->timestamped_pre); - WARN_ON_ONCE(xfer->ptp_sts && !xfer->timestamped_post); - } - } + if (unlikely(ctlr->ptp_sts_supported)) + list_for_each_entry(xfer, &mesg->transfers, transfer_list) + WARN_ON_ONCE(xfer->ptp_sts && !xfer->timestamped); spi_unmap_msg(ctlr, mesg); @@ -1955,13 +1951,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi->mode |= SPI_CS_HIGH; /* Device speed */ - rc = of_property_read_u32(nc, "spi-max-frequency", &value); - if (rc) { - dev_err(&ctlr->dev, - "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc); - return rc; - } - spi->max_speed_hz = value; + if (!of_property_read_u32(nc, "spi-max-frequency", &value)) + spi->max_speed_hz = value; return 0; } @@ -2181,9 +2172,10 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr, return AE_NO_MEMORY; } + ACPI_COMPANION_SET(&spi->dev, adev); spi->max_speed_hz = lookup.max_speed_hz; - spi->mode = lookup.mode; + spi->mode |= lookup.mode; spi->irq = lookup.irq; spi->bits_per_word = lookup.bits_per_word; spi->chip_select = lookup.chip_select; @@ -4034,7 +4026,7 @@ static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev) struct device *dev; dev = bus_find_device_by_acpi_dev(&spi_bus_type, adev); - return dev ? to_spi_device(dev) : NULL; + return to_spi_device(dev); } static int acpi_spi_notify(struct notifier_block *nb, unsigned long value, diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 2ab6e782f14c..80dd1025b953 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -275,14 +275,14 @@ static int spidev_message(struct spidev_data *spidev, #ifdef VERBOSE dev_dbg(&spidev->spi->dev, " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n", - u_tmp->len, - u_tmp->rx_buf ? "rx " : "", - u_tmp->tx_buf ? "tx " : "", - u_tmp->cs_change ? "cs " : "", - u_tmp->bits_per_word ? : spidev->spi->bits_per_word, - u_tmp->delay_usecs, - u_tmp->word_delay_usecs, - u_tmp->speed_hz ? : spidev->spi->max_speed_hz); + k_tmp->len, + k_tmp->rx_buf ? "rx " : "", + k_tmp->tx_buf ? "tx " : "", + k_tmp->cs_change ? "cs " : "", + k_tmp->bits_per_word ? : spidev->spi->bits_per_word, + k_tmp->delay.value, + k_tmp->word_delay.value, + k_tmp->speed_hz ? : spidev->spi->max_speed_hz); #endif spi_message_add_tail(k_tmp, &msg); } @@ -454,10 +454,11 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) spi->max_speed_hz = tmp; retval = spi_setup(spi); - if (retval >= 0) + if (retval == 0) { spidev->speed_hz = tmp; - else - dev_dbg(&spi->dev, "%d Hz (max)\n", tmp); + dev_dbg(&spi->dev, "%d Hz (max)\n", + spidev->speed_hz); + } spi->max_speed_hz = save; } break; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9a911bb5fb61..29d920516e0b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -277,9 +277,9 @@ enum regulator_type { * @curr_table: Current limit mapping table (if table based mapping) * * @vsel_range_reg: Register for range selector when using pickable ranges - * and regulator_regmap_X_voltage_X_pickable functions. + * and ``regulator_map_*_voltage_*_pickable`` functions. * @vsel_range_mask: Mask for register bitfield used for range selector - * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ + * @vsel_reg: Register for selector when using ``regulator_map_*_voltage_*`` * @vsel_mask: Mask for register bitfield used for selector * @vsel_step: Specify the resolution of selector stepping when setting * voltage. If 0, then no stepping is done (requested selector is diff --git a/include/linux/soc/qcom/smd-rpm.h b/include/linux/soc/qcom/smd-rpm.h index 9e4fdd861a51..da304ce8c8f7 100644 --- a/include/linux/soc/qcom/smd-rpm.h +++ b/include/linux/soc/qcom/smd-rpm.h @@ -10,6 +10,7 @@ struct qcom_smd_rpm; /* * Constants used for addressing resources in the RPM. */ +#define QCOM_SMD_RPM_BBYB 0x62796262 #define QCOM_SMD_RPM_BOBB 0x62626f62 #define QCOM_SMD_RPM_BOOST 0x61747362 #define QCOM_SMD_RPM_BUS_CLK 0x316b6c63 diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 6d16ba01ff5a..38286de779e3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -135,6 +135,8 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging + * @driver_override: If the name of a driver is written to this attribute, then + * the device will bind to the named driver and only the named driver. * @cs_gpio: LEGACY: gpio number of the chipselect line (optional, -ENOENT when * not using a GPIO line) use cs_gpiod in new drivers by opting in on * the spi_master. @@ -443,6 +445,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @spi_transfer->ptp_sts_word_post were transmitted. * If the driver does not set this, the SPI core takes the snapshot as * close to the driver hand-over as possible. + * @irq_flags: Interrupt enable state during PTP system timestamping * * Each SPI controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -481,6 +484,9 @@ struct spi_controller { /* spi_device.mode flags understood by this controller driver */ u32 mode_bits; + /* spi_device.mode flags override flags for this controller */ + u32 buswidth_override_bits; + /* bitmask of supported bits_per_word for transfers */ u32 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) @@ -930,8 +936,7 @@ struct spi_transfer { struct ptp_system_timestamp *ptp_sts; - bool timestamped_pre; - bool timestamped_post; + bool timestamped; struct list_head transfer_list; }; diff --git a/tools/spi/Makefile b/tools/spi/Makefile index 5c342e655e55..2249a1546cc1 100644 --- a/tools/spi/Makefile +++ b/tools/spi/Makefile @@ -51,7 +51,7 @@ $(OUTPUT)spidev_fdx: $(SPIDEV_FDX_IN) clean: rm -f $(ALL_PROGRAMS) - rm -f $(OUTPUT)include/linux/spi/spidev.h + rm -rf $(OUTPUT)include/ find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 3559e7646256..27967dd90f8f 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -13,6 +13,7 @@ #include <stdio.h> #include <stdlib.h> #include <string.h> +#include <errno.h> #include <getopt.h> #include <fcntl.h> #include <time.h> @@ -26,7 +27,11 @@ static void pabort(const char *s) { - perror(s); + if (errno != 0) + perror(s); + else + printf("%s\n", s); + abort(); } @@ -283,7 +288,6 @@ static void parse_opts(int argc, char *argv[]) break; default: print_usage(argv[0]); - break; } } if (mode & SPI_LOOP) { @@ -405,6 +409,9 @@ int main(int argc, char *argv[]) parse_opts(argc, argv); + if (input_tx && input_file) + pabort("only one of -p and --input may be selected"); + fd = open(device, O_RDWR); if (fd < 0) pabort("can't open device"); @@ -446,9 +453,6 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - if (input_tx && input_file) - pabort("only one of -p and --input may be selected"); - if (input_tx) transfer_escaped_string(fd, input_tx); else if (input_file) |