diff options
34 files changed, 1 insertions, 2265 deletions
diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt deleted file mode 100644 index 7e66b7f7ba96..000000000000 --- a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt +++ /dev/null @@ -1,30 +0,0 @@ -ZTE sysctrl Registers - -Registers for 'zte,zx296702' SoC: - -System management required properties: - - compatible = "zte,sysctrl" - -Low power management required properties: - - compatible = "zte,zx296702-pcu" - -Bus matrix required properties: - - compatible = "zte,zx-bus-matrix" - - -Registers for 'zte,zx296718' SoC: - -System management required properties: - - compatible = "zte,zx296718-aon-sysctrl" - - compatible = "zte,zx296718-sysctrl" - -Example: -aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; -}; - -sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml deleted file mode 100644 index 672f8129cd31..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.yaml +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/zte.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ZTE platforms device tree bindings - -maintainers: - - Jun Nie <jun.nie@linaro.org> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - enum: - - zte,zx296702-ad1 - - const: zte,zx296702 - - items: - - enum: - - zte,zx296718-evb - - const: zte,zx296718 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt deleted file mode 100644 index b015508f9780..000000000000 --- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -ZTE zx2967 SoCs Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be one of the following. - * zte,zx296718-reset -- reg: physical base address of the controller and length of memory mapped - region. -- #reset-cells: must be 1. - -example: - - reset: reset-controller@1461060 { - compatible = "zte,zx296718-reset"; - reg = <0x01461060 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index c23c93b400f0..1a51c532e8d2 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -19,7 +19,6 @@ select: contains: enum: - arm,pl011 - - zte,zx296702-uart required: - compatible @@ -30,7 +29,6 @@ properties: - const: arm,pl011 - const: arm,primecell - items: - - const: zte,zx296702-uart - const: arm,primecell reg: diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt deleted file mode 100644 index 7629de1c2c72..000000000000 --- a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt +++ /dev/null @@ -1,19 +0,0 @@ -* ZTE zx2967 family Power Domains - -zx2967 family includes support for multiple power domains which are used -to gate power to one or more peripherals on the processor. - -Required Properties: - - compatible: should be one of the following. - * zte,zx296718-pcu - for zx296718 power domain. - - reg: physical base address of the controller and length of memory mapped - region. - - #power-domain-cells: Must be 1. - -Example: - - pcu_domain: pcu@117000 { - compatible = "zte,zx296718-pcu"; - reg = <0x00117000 0x1000>; - #power-domain-cells = <1>; - }; diff --git a/MAINTAINERS b/MAINTAINERS index aeef69cbc7ec..54b5e6dee017 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2704,40 +2704,6 @@ S: Maintained F: arch/arm/mach-pxa/include/mach/z2.h F: arch/arm/mach-pxa/z2.c -ARM/ZTE ARCHITECTURE -M: Jun Nie <jun.nie@linaro.org> -M: Shawn Guo <shawnguo@kernel.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: Documentation/devicetree/bindings/arm/zte.yaml -F: Documentation/devicetree/bindings/clock/zx2967*.txt -F: Documentation/devicetree/bindings/dma/zxdma.txt -F: Documentation/devicetree/bindings/gpio/zx296702-gpio.txt -F: Documentation/devicetree/bindings/i2c/i2c-zx2967.txt -F: Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt -F: Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt -F: Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt -F: Documentation/devicetree/bindings/soc/zte/ -F: Documentation/devicetree/bindings/sound/zte,*.txt -F: Documentation/devicetree/bindings/thermal/zx2967-thermal.txt -F: Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt -F: arch/arm/boot/dts/zx2967* -F: arch/arm/mach-zx/ -F: arch/arm64/boot/dts/zte/ -F: drivers/clk/zte/ -F: drivers/dma/zx_dma.c -F: drivers/gpio/gpio-zx.c -F: drivers/i2c/busses/i2c-zx2967.c -F: drivers/mmc/host/dw_mmc-zx.* -F: drivers/pinctrl/zte/ -F: drivers/soc/zte/ -F: drivers/thermal/zx2967_thermal.c -F: drivers/watchdog/zx2967_wdt.c -F: include/dt-bindings/clock/zx2967*.h -F: include/dt-bindings/soc/zte,*.h -F: sound/soc/codecs/zx_aud96p22.c -F: sound/soc/zte/ - ARM/ZYNQ ARCHITECTURE M: Michal Simek <michal.simek@xilinx.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6029,14 +5995,6 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/xlnx/ F: drivers/gpu/drm/xlnx/ -DRM DRIVERS FOR ZTE ZX -M: Shawn Guo <shawnguo@kernel.org> -L: dri-devel@lists.freedesktop.org -S: Maintained -T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/zte,vou.txt -F: drivers/gpu/drm/zte/ - DRM PANEL DRIVERS M: Thierry Reding <thierry.reding@gmail.com> R: Sam Ravnborg <sam@ravnborg.org> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d9a7060d365..9f605ab54570 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -718,8 +718,6 @@ source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/mach-vt8500/Kconfig" -source "arch/arm/mach-zx/Kconfig" - source "arch/arm/mach-zynq/Kconfig" # ARMv7-M architecture diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index fe8b95069d31..543e29068c08 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1353,18 +1353,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1599,7 +1587,6 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1782,7 +1769,6 @@ config DEBUG_UART_VIRT default 0xfb020000 if DEBUG_OMAP3UART3 default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd883000 if DEBUG_ALPINE_UART0 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7c4b50852a78..7b8eed93f1fa 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -220,7 +220,6 @@ machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 -machine-$(CONFIG_ARCH_ZX) += zx machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_PLAT_SPEAR) += spear diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index da413b4d5c3f..5fcae846aa00 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1387,7 +1387,6 @@ dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-infinity2m-ssd202d-ssd201htv2.dtb \ mstar-infinity3-msc313e-breadbee.dtb \ mstar-mercury5-ssc8336n-midrived08.dtb -dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts deleted file mode 100644 index bd9400840023..000000000000 --- a/arch/arm/boot/dts/zx296702-ad1.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -/dts-v1/; - -#include "zx296702.dtsi" - -/ { - model = "ZTE ZX296702 AD1 Board"; - compatible = "zte,zx296702-ad1", "zte,zx296702"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - memory { - device_type = "memory"; - reg = <0x50000000 0x20000000>; - }; -}; - -&mmc0 { - supports-highspeed; - non-removable; - disable-wp; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; -}; - -&mmc1 { - supports-highspeed; - non-removable; - disable-wp; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi deleted file mode 100644 index f378c661b3bf..000000000000 --- a/arch/arm/boot/dts/zx296702.dtsi +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/clock/zx296702-clock.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "zte,zx296702-smp"; - - cpu@0 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&l2cc>; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&l2cc>; - reg = <1>; - }; - }; - - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - matrix: bus-matrix@400000 { - compatible = "zte,zx-bus-matrix"; - reg = <0x00400000 0x1000>; - }; - - intc: interrupt-controller@801000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - reg = <0x00801000 0x1000>, - <0x00800100 0x100>; - }; - - global_timer: timer@8000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x00800200 0x20>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&intc>; - clocks = <&topclk ZX296702_A9_PERIPHCLK>; - }; - - l2cc: cache-controller@c00000 { - compatible = "arm,pl310-cache"; - reg = <0x00c00000 0x1000>; - cache-unified; - cache-level = <2>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <1 1 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - }; - - pcu: pcu@a0008000 { - compatible = "zte,zx296702-pcu"; - reg = <0xa0008000 0x1000>; - }; - - topclk: topclk@9800000 { - compatible = "zte,zx296702-topcrm-clk"; - reg = <0x09800000 0x1000>; - #clock-cells = <1>; - }; - - lsp1clk: lsp1clk@9400000 { - compatible = "zte,zx296702-lsp1crpm-clk"; - reg = <0x09400000 0x1000>; - #clock-cells = <1>; - }; - - lsp0clk: lsp0clk@b000000 { - compatible = "zte,zx296702-lsp0crpm-clk"; - reg = <0x0b000000 0x1000>; - #clock-cells = <1>; - }; - - uart0: serial@9405000 { - compatible = "zte,zx296702-uart"; - reg = <0x09405000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lsp1clk ZX296702_UART0_WCLK>; - status = "disabled"; - }; - - uart1: serial@9406000 { - compatible = "zte,zx296702-uart"; - reg = <0x09406000 0x1000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lsp1clk ZX296702_UART1_WCLK>; - status = "disabled"; - }; - - mmc0: mmc@9408000 { - compatible = "snps,dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x09408000 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>, - <&lsp1clk ZX296702_SDMMC0_WCLK>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - mmc1: mmc@b003000 { - compatible = "snps,dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0b003000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>, - <&lsp0clk ZX296702_SDMMC1_WCLK>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysctrl: sysctrl@a0007000 { - compatible = "zte,sysctrl", "syscon"; - reg = <0xa0007000 0x1000>; - }; - }; -}; diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig deleted file mode 100644 index a046a492bfa7..000000000000 --- a/arch/arm/configs/zx_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_NAMESPACES=y -CONFIG_USER_NS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_ZX=y -CONFIG_SOC_ZX296702=y -# CONFIG_SWP_EMULATE is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_SMP=y -CONFIG_VMSPLIT_2G=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_KSM=y -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_KERNEL_MODE_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HIBERNATION=y -CONFIG_PM_RUNTIME=y -CONFIG_PM_DEBUG=y -CONFIG_SUSPEND_TIME=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait" -#CONFIG_NET is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=192 -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=1 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_UID_STAT=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_MD=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_UEVENT=y -CONFIG_DM_VERITY=y -CONFIG_NETDEVICES=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SPI=y -CONFIG_LOGO=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 -CONFIG_MMC_DW=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_DEBUG=y -CONFIG_FUSE_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=936 -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -#CONFIG_NFS_FS is not set -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_FRAME_WARN=4096 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_PANIC_TIMEOUT=5 -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_FTRACE is not set -CONFIG_KGDB=y -CONFIG_KGDB_KDB=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_STACKTRACE=y -CONFIG_DEBUG_ZTE_ZX=y -CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_LZO=y -CONFIG_GPIOLIB=y diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig deleted file mode 100644 index ea29c84a7849..000000000000 --- a/arch/arm/mach-zx/Kconfig +++ /dev/null @@ -1,21 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menuconfig ARCH_ZX - bool "ZTE ZX family" - depends on ARCH_MULTI_V7 - help - Support for ZTE ZX-based family of processors. TV - set-top-box processor is supported. More will be - added soon. - -if ARCH_ZX - -config SOC_ZX296702 - def_bool y - select ARM_GIC - select ARM_GLOBAL_TIMER - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select PM_GENERIC_DOMAINS if PM - help - Support for ZTE ZX296702 SoC which is a dual core CortexA9MP -endif diff --git a/arch/arm/mach-zx/Makefile b/arch/arm/mach-zx/Makefile deleted file mode 100644 index 6f8930cdb8fb..000000000000 --- a/arch/arm/mach-zx/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_SOC_ZX296702) += zx296702.o zx296702-pm-domain.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zx/core.h b/arch/arm/mach-zx/core.h deleted file mode 100644 index 25fe873892c9..000000000000 --- a/arch/arm/mach-zx/core.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#ifndef __MACH_ZX_CORE_H -#define __MACH_ZX_CORE_H - -extern void zx_resume_jump(void); -extern size_t zx_suspend_iram_sz; -extern unsigned long zx_secondary_startup_pa; - -void zx_secondary_startup(void); - -#endif /* __MACH_ZX_CORE_H */ diff --git a/arch/arm/mach-zx/headsmp.S b/arch/arm/mach-zx/headsmp.S deleted file mode 100644 index 0846859b0573..000000000000 --- a/arch/arm/mach-zx/headsmp.S +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <linux/linkage.h> - - .align 3 - .arm - -/* It runs from physical address */ -ENTRY(zx_resume_jump) - adr r1, zx_secondary_startup_pa - ldr r0, [r1] - bx r0 -ENDPROC(zx_resume_jump) - -ENTRY(zx_secondary_startup_pa) - .word zx_secondary_startup_pa - -ENTRY(zx_suspend_iram_sz) - .word . - zx_resume_jump -ENDPROC(zx_secondary_startup_pa) - - -ENTRY(zx_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(zx_secondary_startup) diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c deleted file mode 100644 index d4e1d3792224..000000000000 --- a/arch/arm/mach-zx/platsmp.c +++ /dev/null @@ -1,186 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/smp.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/fncpy.h> -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> -#include <asm/smp_plat.h> - -#include "core.h" - -#define AON_SYS_CTRL_RESERVED1 0xa8 - -#define BUS_MATRIX_REMAP_CONFIG 0x00 - -#define PCU_CPU0_CTRL 0x00 -#define PCU_CPU1_CTRL 0x04 -#define PCU_CPU1_ST 0x0c -#define PCU_GLOBAL_CTRL 0x14 -#define PCU_EXPEND_CONTROL 0x34 - -#define ZX_IRAM_BASE 0x00200000 - -static void __iomem *pcu_base; -static void __iomem *matrix_base; -static void __iomem *scu_base; - -void __init zx_smp_prepare_cpus(unsigned int max_cpus) -{ - struct device_node *np; - unsigned long base = 0; - void __iomem *aonsysctrl_base; - void __iomem *sys_iram; - - base = scu_a9_get_base(); - scu_base = ioremap(base, SZ_256); - if (!scu_base) { - pr_err("%s: failed to map scu\n", __func__); - return; - } - - scu_enable(scu_base); - - np = of_find_compatible_node(NULL, NULL, "zte,sysctrl"); - if (!np) { - pr_err("%s: failed to find sysctrl node\n", __func__); - return; - } - - aonsysctrl_base = of_iomap(np, 0); - if (!aonsysctrl_base) { - pr_err("%s: failed to map aonsysctrl\n", __func__); - of_node_put(np); - return; - } - - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - __raw_writel(__pa_symbol(zx_secondary_startup), - aonsysctrl_base + AON_SYS_CTRL_RESERVED1); - - iounmap(aonsysctrl_base); - of_node_put(np); - - np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu"); - pcu_base = of_iomap(np, 0); - of_node_put(np); - WARN_ON(!pcu_base); - - np = of_find_compatible_node(NULL, NULL, "zte,zx-bus-matrix"); - matrix_base = of_iomap(np, 0); - of_node_put(np); - WARN_ON(!matrix_base); - - /* Map the first 4 KB IRAM for suspend usage */ - sys_iram = __arm_ioremap_exec(ZX_IRAM_BASE, PAGE_SIZE, false); - zx_secondary_startup_pa = __pa_symbol(zx_secondary_startup); - fncpy(sys_iram, &zx_resume_jump, zx_suspend_iram_sz); -} - -static int zx_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - static bool first_boot = true; - - if (first_boot) { - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - first_boot = false; - return 0; - } - - /* Swap the base address mapping between IRAM and IROM */ - writel_relaxed(0x1, matrix_base + BUS_MATRIX_REMAP_CONFIG); - - /* Power on CPU1 */ - writel_relaxed(0x0, pcu_base + PCU_CPU1_CTRL); - - /* Wait for power on ack */ - while (readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x4) - cpu_relax(); - - /* Swap back the mapping of IRAM and IROM */ - writel_relaxed(0x0, matrix_base + BUS_MATRIX_REMAP_CONFIG); - - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static int zx_cpu_kill(unsigned int cpu) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(2000); - - writel_relaxed(0x2, pcu_base + PCU_CPU1_CTRL); - - while ((readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x3) != 0x0) { - if (time_after(jiffies, timeout)) { - pr_err("*** cpu1 poweroff timeout\n"); - break; - } - } - return 1; -} - -static void zx_cpu_die(unsigned int cpu) -{ - scu_power_mode(scu_base, SCU_PM_POWEROFF); - cpu_enter_lowpower(); - - while (1) - cpu_do_idle(); -} -#endif - -static void zx_secondary_init(unsigned int cpu) -{ - scu_power_mode(scu_base, SCU_PM_NORMAL); -} - -static const struct smp_operations zx_smp_ops __initconst = { - .smp_prepare_cpus = zx_smp_prepare_cpus, - .smp_secondary_init = zx_secondary_init, - .smp_boot_secondary = zx_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = zx_cpu_kill, - .cpu_die = zx_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(zx_smp, "zte,zx296702-smp", &zx_smp_ops); diff --git a/arch/arm/mach-zx/zx296702-pm-domain.c b/arch/arm/mach-zx/zx296702-pm-domain.c deleted file mode 100644 index 7a08bf9dd792..000000000000 --- a/arch/arm/mach-zx/zx296702-pm-domain.c +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015 Linaro Ltd. - * - * Author: Jun Nie <jun.nie@linaro.org> - */ -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/pm_domain.h> -#include <linux/slab.h> - -#define PCU_DM_CLKEN 0x18 -#define PCU_DM_RSTEN 0x1C -#define PCU_DM_ISOEN 0x20 -#define PCU_DM_PWRDN 0x24 -#define PCU_DM_ACK_SYNC 0x28 - -enum { - PCU_DM_NEON0 = 0, - PCU_DM_NEON1, - PCU_DM_GPU, - PCU_DM_DECPPU, - PCU_DM_VOU, - PCU_DM_R2D, - PCU_DM_TOP, -}; - -static void __iomem *pcubase; - -struct zx_pm_domain { - struct generic_pm_domain dm; - unsigned int bit; -}; - -static int normal_power_off(struct generic_pm_domain *domain) -{ - struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; - unsigned long loop = 1000; - u32 tmp; - - tmp = readl_relaxed(pcubase + PCU_DM_CLKEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_CLKEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_ISOEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_ISOEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_RSTEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_RSTEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_PWRDN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_PWRDN); - do { - tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit); - } while (--loop && !tmp); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - return 0; -} - -static int normal_power_on(struct generic_pm_domain *domain) -{ - struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; - unsigned long loop = 10000; - u32 tmp; - - tmp = readl_relaxed(pcubase + PCU_DM_PWRDN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_PWRDN); - do { - tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit); - } while (--loop && tmp); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - tmp = readl_relaxed(pcubase + PCU_DM_RSTEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_RSTEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_ISOEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_ISOEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_CLKEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_CLKEN); - udelay(5); - return 0; -} - -static struct zx_pm_domain gpu_domain = { - .dm = { - .name = "gpu_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_GPU, -}; - -static struct zx_pm_domain decppu_domain = { - .dm = { - .name = "decppu_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_DECPPU, -}; - -static struct zx_pm_domain vou_domain = { - .dm = { - .name = "vou_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_VOU, -}; - -static struct zx_pm_domain r2d_domain = { - .dm = { - .name = "r2d_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_R2D, -}; - -static struct generic_pm_domain *zx296702_pm_domains[] = { - &vou_domain.dm, - &gpu_domain.dm, - &decppu_domain.dm, - &r2d_domain.dm, -}; - -static int zx296702_pd_probe(struct platform_device *pdev) -{ - struct genpd_onecell_data *genpd_data; - struct resource *res; - int i; - - genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); - if (!genpd_data) - return -ENOMEM; - - genpd_data->domains = zx296702_pm_domains; - genpd_data->num_domains = ARRAY_SIZE(zx296702_pm_domains); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - - pcubase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(pcubase)) { - dev_err(&pdev->dev, "ioremap fail.\n"); - return -EIO; - } - - for (i = 0; i < ARRAY_SIZE(zx296702_pm_domains); ++i) - pm_genpd_init(zx296702_pm_domains[i], NULL, false); - - of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); - return 0; -} - -static const struct of_device_id zx296702_pm_domain_matches[] __initconst = { - { .compatible = "zte,zx296702-pcu", }, - { }, -}; - -static struct platform_driver zx296702_pd_driver __initdata = { - .driver = { - .name = "zx-powerdomain", - .owner = THIS_MODULE, - .of_match_table = zx296702_pm_domain_matches, - }, - .probe = zx296702_pd_probe, -}; - -static int __init zx296702_pd_init(void) -{ - return platform_driver_register(&zx296702_pd_driver); -} -subsys_initcall(zx296702_pd_init); diff --git a/arch/arm/mach-zx/zx296702.c b/arch/arm/mach-zx/zx296702.c deleted file mode 100644 index fd8fa3a074fa..000000000000 --- a/arch/arm/mach-zx/zx296702.c +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/of_address.h> -#include <linux/of_platform.h> - -static const char *const zx296702_dt_compat[] __initconst = { - "zte,zx296702", - NULL, -}; - -DT_MACHINE_START(ZX, "ZTE ZX296702 (Device Tree)") - .dt_compat = zx296702_dt_compat, - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, -MACHINE_END diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6eecdef538bd..ec3c0cb27d1e 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -317,12 +317,6 @@ config ARCH_XGENE help This enables support for AppliedMicro X-Gene SOC Family -config ARCH_ZX - bool "ZTE ZX SoC Family" - select PINCTRL - help - This enables support for ZTE ZX SoC Family - config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 9b1170658d60..f1173cd93594 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -29,4 +29,3 @@ subdir-y += synaptics subdir-y += ti subdir-y += toshiba subdir-y += xilinx -subdir-y += zte diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile deleted file mode 100644 index 126896144bda..000000000000 --- a/arch/arm64/boot/dts/zte/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb -dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts deleted file mode 100644 index cb2519ecd724..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2016 ZTE Corporation. - * Copyright 2016 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "zx296718.dtsi" - -/ { - model = "ZTE zx296718 evaluation board"; - compatible = "zte,zx296718-evb", "zte,zx296718"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x40000000>; - }; - - sound-spdif0 { - compatible = "audio-graph-card"; - dais = <&spdif0_port>; - }; - - sound-i2s0 { - compatible = "audio-graph-card"; - dais = <&i2s0_port>; - pinctrl-names = "default"; - pinctrl-0 = <&lifier_pins>; - pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>; - widgets = "Line", "Line Out Jack"; - routing = "Amplifier", "LINEOUTL", - "Amplifier", "LINEOUTR", - "Line Out Jack", "Amplifier"; - }; -}; - -&aud96p22 { - port { - aud96p22_endpoint: endpoint { - remote-endpoint = <&i2s0_endpoint>; - }; - }; -}; - -&emmc { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - port { - hdmi_endpoint: endpoint { - remote-endpoint = <&spdif0_endpoint>; - }; - }; -}; - -&i2c0 { - status = "okay"; -}; - -&i2s0 { - status = "okay"; - - i2s0_port: port { - i2s0_endpoint: endpoint { - remote-endpoint = <&aud96p22_endpoint>; - dai-format = "i2s"; - frame-master; - bitclock-master; - }; - }; -}; - -&pmm { - amplifier_pins: amplifier { - pins = "TSI3_DATA"; - function = "BGPIO"; - }; -}; - -&sd1 { - status = "okay"; -}; - -&spdif0 { - status = "okay"; - - spdif0_port: port { - spdif0_endpoint: endpoint { - remote-endpoint = <&hdmi_endpoint>; - }; - }; -}; - -&tvenc { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts deleted file mode 100644 index e02509f7082b..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2017 Sanechips Technology Co., Ltd. - * Copyright 2017 Linaro Ltd. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ - -/dts-v1/; -#include "zx296718.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "ZTE ZX296718 PCBOX Board"; - compatible = "zte,zx296718-pcbox", "zte,zx296718"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - a53_vdd0v9: regulator-a53 { - compatible = "pwm-regulator"; - pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>; - regulator-name = "A53_VDD0V9"; - regulator-min-microvolt = <855000>; - regulator-max-microvolt = <1183000>; - pwm-dutycycle-unit = <100>; - pwm-dutycycle-range = <0 100>; - regulator-always-on; - regulator-boot-on; - }; - - sound-spdif0 { - compatible = "audio-graph-card"; - dais = <&spdif0_port>; - }; - - sound-i2s0 { - compatible = "audio-graph-card"; - dais = <&i2s0_port>; - }; -}; - -&aud96p22 { - port { - aud96p22_endpoint: endpoint { - remote-endpoint = <&i2s0_endpoint>; - }; - }; -}; - -&cpu0 { - cpu-supply = <&a53_vdd0v9>; -}; - -&emmc { - status = "okay"; -}; - -&hdmi { - status = "disabled"; - - port { - hdmi_endpoint: endpoint { - remote-endpoint = <&spdif0_endpoint>; - }; - }; -}; - -&i2c0 { - status = "okay"; -}; - -&i2s0 { - status = "okay"; - - i2s0_port: port { - i2s0_endpoint: endpoint { - remote-endpoint = <&aud96p22_endpoint>; - dai-format = "i2s"; - frame-master; - bitclock-master; - }; - }; -}; - -&irdec { - status = "okay"; -}; - -&pmm { - pwm3_pins: pwm3 { - pins = "KEY_ROW2"; - function = "PWM"; - }; - - vga_pins: vga { - pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS"; - function = "VGA"; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins>; - status = "okay"; -}; - -&sd0 { - status = "okay"; -}; - -&sd1 { - status = "okay"; -}; - -&spdif0 { - status = "okay"; - - spdif0_port: port { - spdif0_endpoint: endpoint { - remote-endpoint = <&hdmi_endpoint>; - }; - }; -}; - -&tvenc { - status = "disabled"; -}; - -&uart0 { - status = "okay"; -}; - -&vga { - pinctrl-names = "default"; - pinctrl-0 = <&vga_pins>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi deleted file mode 100644 index cc54837ff4ba..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ /dev/null @@ -1,627 +0,0 @@ -/* - * Copyright 2016 ZTE Corporation. - * Copyright 2016 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/zx296718-clock.h> - -/ { - compatible = "zte,zx296718"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - - aliases { - gpio0 = &bgpio0; - gpio1 = &bgpio1; - gpio2 = &bgpio2; - gpio3 = &bgpio3; - gpio4 = &bgpio4; - gpio5 = &bgpio5; - gpio6 = &bgpio6; - serial0 = &uart0; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - core2 { - cpu = <&cpu2>; - }; - core3 { - cpu = <&cpu3>; - }; - }; - }; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - }; - - cluster0_opp: opp-table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <866000>; - clock-latency-ns = <500000>; - }; - - opp-648000000 { - opp-hz = /bits/ 64 <648000000>; - opp-microvolt = <866000>; - clock-latency-ns = <500000>; - }; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <888000>; - clock-latency-ns = <500000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <898000>; - clock-latency-ns = <500000>; - }; - - opp-1188000000 { - opp-hz = /bits/ 64 <1188000000>; - opp-microvolt = <1015000>; - clock-latency-ns = <500000>; - }; - }; - - clk24k: clk-24k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000>; - clock-output-names = "rtcclk"; - }; - - osc32k: clk-osc32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - clock-output-names = "osc32k"; - }; - - osc12m: clk-osc12m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - clock-output-names = "osc12m"; - }; - - osc24m: clk-osc24m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc24m"; - }; - - osc25m: clk-osc25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "osc25m"; - }; - - osc60m: clk-osc60m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <60000000>; - clock-output-names = "osc60m"; - }; - - osc99m: clk-osc99m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <99000000>; - clock-output-names = "osc99m"; - }; - - osc125m: clk-osc125m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "osc125m"; - }; - - osc198m: clk-osc198m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <198000000>; - clock-output-names = "osc198m"; - }; - - pll_audio: clk-pll-884m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <884000000>; - clock-output-names = "pll_audio"; - }; - - pll_ddr: clk-pll-932m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <932000000>; - clock-output-names = "pll_ddr"; - }; - - pll_hsic: clk-pll-960m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <960000000>; - clock-output-names = "pll_hsic"; - }; - - pll_mac: clk-pll-1000m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - clock-output-names = "pll_mac"; - }; - - pll_mm0: clk-pll-1188m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1188000000>; - clock-output-names = "pll_mm0"; - }; - - pll_mm1: clk-pll-1296m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1296000000>; - clock-output-names = "pll_mm1"; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; - }; - - gic: interrupt-controller@2a00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x02a00000 0x10000>, - <0x02b00000 0xc0000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - irdec: ir-decoder@111000 { - compatible = "zte,zx296718-irdec"; - reg = <0x111000 0x1000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; - }; - - iocfg: pin-controller@119000 { - compatible = "zte,zx296718-iocfg"; - reg = <0x119000 0x1000>; - }; - - uart0: uart@11f000 { - compatible = "arm,pl011", "arm,primecell"; - arm,primecell-periphid = <0x001feffe>; - reg = <0x11f000 0x1000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24m>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - sd0: mmc@1110000 { - compatible = "zte,zx296718-dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01110000 0x1000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - data-addr = <0x200>; - fifo-watermark-aligned; - bus-width = <4>; - clock-frequency = <50000000>; - clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - sd-uhs-ddr50; - status = "disabled"; - }; - - sd1: mmc@1111000 { - compatible = "zte,zx296718-dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01111000 0x1000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - data-addr = <0x200>; - fifo-watermark-aligned; - bus-width = <4>; - clock-frequency = <167000000>; - clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <167000000>; - cap-sdio-irq; - cap-sd-highspeed; - status = "disabled"; - }; - - dma: dma-controller@1460000 { - compatible = "zte,zx296702-dma"; - reg = <0x01460000 0x1000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24m>; - clock-names = "dmaclk"; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <32>; - }; - - lsp0crm: clock-controller@1420000 { - compatible = "zte,zx296718-lsp0crm"; - reg = <0x01420000 0x1000>; - #clock-cells = <1>; - }; - - bgpio0: gpio@142d000 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d000 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 48 16>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio1: gpio@142d040 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d040 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 80 16>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio2: gpio@142d080 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d080 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 80 3 - &pmm 3 32 4 - &pmm 7 83 9>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio3: gpio@142d0c0 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d0c0 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 92 16>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio4: gpio@142d100 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d100 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 108 12 - &pmm 12 121 4>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio5: gpio@142d140 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d140 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 125 16>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio6: gpio@142d180 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d180 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 141 2>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - lsp1crm: clock-controller@1430000 { - compatible = "zte,zx296718-lsp1crm"; - reg = <0x01430000 0x1000>; - #clock-cells = <1>; - }; - - pwm: pwm@1439000 { - compatible = "zte,zx296718-pwm"; - reg = <0x1439000 0x1000>; - clocks = <&lsp1crm LSP1_PWM_PCLK>, - <&lsp1crm LSP1_PWM_WCLK>; - clock-names = "pclk", "wclk"; - #pwm-cells = <3>; - status = "disabled"; - }; - - vou: vou@1440000 { - compatible = "zte,zx296718-vou"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1440000 0x10000>; - - dpc: dpc@0 { - compatible = "zte,zx296718-dpc"; - reg = <0x0000 0x1000>, <0x1000 0x1000>, - <0x5000 0x1000>, <0x6000 0x1000>, - <0xa000 0x1000>; - reg-names = "osd", "timing_ctrl", - "dtrc", "vou_ctrl", - "otfppu"; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, - <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; - clock-names = "aclk", "ppu_wclk", - "main_wclk", "aux_wclk"; - }; - - vga: vga@8000 { - compatible = "zte,zx296718-vga"; - reg = <0x8000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VGA_I2C_WCLK>; - clock-names = "i2c_wclk"; - zte,vga-power-control = <&sysctrl 0x170 0xe0>; - status = "disabled"; - }; - - hdmi: hdmi@c000 { - compatible = "zte,zx296718-hdmi"; - reg = <0xc000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; - clocks = <&topcrm HDMI_OSC_CEC>, - <&topcrm HDMI_OSC_CLK>, - <&topcrm HDMI_XCLK>; - clock-names = "osc_cec", "osc_clk", "xclk"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - tvenc: tvenc@2000 { - compatible = "zte,zx296718-tvenc"; - reg = <0x2000 0x1000>; - zte,tvenc-power-control = <&sysctrl 0x170 0x10>; - status = "disabled"; - }; - }; - - topcrm: clock-controller@1461000 { - compatible = "zte,zx296718-topcrm"; - reg = <0x01461000 0x1000>; - #clock-cells = <1>; - }; - - pmm: pin-controller@1462000 { - compatible = "zte,zx296718-pmm"; - reg = <0x1462000 0x1000>; - zte,auxiliary-controller = <&iocfg>; - }; - - sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; - }; - - emmc: mmc@1470000{ - compatible = "zte,zx296718-dw-mshc"; - reg = <0x01470000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - zte,aon-syscon = <&aon_sysctrl>; - bus-width = <8>; - fifo-depth = <128>; - data-addr = <0x200>; - fifo-watermark-aligned; - clock-frequency = <167000000>; - clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <167000000>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - disable-wp; - status = "disabled"; - }; - - audiocrm: clock-controller@1480000 { - compatible = "zte,zx296718-audiocrm"; - reg = <0x01480000 0x1000>; - #clock-cells = <1>; - }; - - i2s0: i2s@1482000 { - compatible = "zte,zx296718-i2s", "zte,zx296702-i2s"; - reg = <0x01482000 0x1000>; - clocks = <&audiocrm AUDIO_I2S0_WCLK>, - <&audiocrm AUDIO_I2S0_PCLK>; - clock-names = "wclk", "pclk"; - assigned-clocks = <&audiocrm I2S0_WCLK_MUX>; - assigned-clock-parents = <&topcrm AUDIO_99M>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma 22>, <&dma 23>; - dma-names = "tx", "rx"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1486000 { - compatible = "zte,zx296718-i2c"; - reg = <0x01486000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&audiocrm AUDIO_I2C0_WCLK>; - clock-frequency = <1600000>; - status = "disabled"; - - aud96p22: codec@22 { - compatible = "zte,zx-aud96p22"; - #sound-dai-cells = <0>; - reg = <0x22>; - }; - }; - - spdif0: spdif@1488000 { - compatible = "zte,zx296702-spdif"; - reg = <0x1488000 0x1000>; - clocks = <&audiocrm AUDIO_SPDIF0_WCLK>; - clock-names = "tx"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - #sound-dai-cells = <0>; - dmas = <&dma 30>; - dma-names = "tx"; - status = "disabled"; - }; - }; -}; diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 71ab75a46491..8dd99ca2192c 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -173,7 +173,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC + default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index d097d070f579..f357c6c659d2 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -22,7 +22,6 @@ source "drivers/soc/ti/Kconfig" source "drivers/soc/ux500/Kconfig" source "drivers/soc/versatile/Kconfig" source "drivers/soc/xilinx/Kconfig" -source "drivers/soc/zte/Kconfig" source "drivers/soc/kendryte/Kconfig" endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 699b758d28e4..9bceb12b291d 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -28,5 +28,4 @@ obj-y += ti/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_PLAT_VERSATILE) += versatile/ obj-y += xilinx/ -obj-$(CONFIG_ARCH_ZX) += zte/ obj-$(CONFIG_SOC_KENDRYTE) += kendryte/ diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig deleted file mode 100644 index 1cf1938da541..000000000000 --- a/drivers/soc/zte/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# ZTE SoC drivers -# -menuconfig SOC_ZTE - depends on ARCH_ZX || COMPILE_TEST - bool "ZTE SoC driver support" - -if SOC_ZTE - -config ZX2967_PM_DOMAINS - bool "ZX2967 PM domains" - depends on PM_GENERIC_DOMAINS - -endif diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile deleted file mode 100644 index 728c677addcd..000000000000 --- a/drivers/soc/zte/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# ZTE SOC drivers -# -obj-$(CONFIG_ZX2967_PM_DOMAINS) += zx2967_pm_domains.o -obj-$(CONFIG_ZX2967_PM_DOMAINS) += zx296718_pm_domains.o diff --git a/drivers/soc/zte/zx296718_pm_domains.c b/drivers/soc/zte/zx296718_pm_domains.c deleted file mode 100644 index 4daab06bbc26..000000000000 --- a/drivers/soc/zte/zx296718_pm_domains.c +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2017 ZTE Ltd. - * - * Author: Baoyou Xie <baoyou.xie@linaro.org> - */ - -#include <dt-bindings/soc/zte,pm_domains.h> -#include "zx2967_pm_domains.h" - -static u16 zx296718_offsets[REG_ARRAY_SIZE] = { - [REG_CLKEN] = 0x18, - [REG_ISOEN] = 0x1c, - [REG_RSTEN] = 0x20, - [REG_PWREN] = 0x24, - [REG_ACK_SYNC] = 0x28, -}; - -enum { - PCU_DM_VOU = 0, - PCU_DM_SAPPU, - PCU_DM_VDE, - PCU_DM_VCE, - PCU_DM_HDE, - PCU_DM_VIU, - PCU_DM_USB20, - PCU_DM_USB21, - PCU_DM_USB30, - PCU_DM_HSIC, - PCU_DM_GMAC, - PCU_DM_TS, -}; - -static struct zx2967_pm_domain vou_domain = { - .dm = { - .name = "vou_domain", - }, - .bit = PCU_DM_VOU, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain sappu_domain = { - .dm = { - .name = "sappu_domain", - }, - .bit = PCU_DM_SAPPU, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain vde_domain = { - .dm = { - .name = "vde_domain", - }, - .bit = PCU_DM_VDE, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain vce_domain = { - .dm = { - .name = "vce_domain", - }, - .bit = PCU_DM_VCE, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain hde_domain = { - .dm = { - .name = "hde_domain", - }, - .bit = PCU_DM_HDE, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain viu_domain = { - .dm = { - .name = "viu_domain", - }, - .bit = PCU_DM_VIU, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain usb20_domain = { - .dm = { - .name = "usb20_domain", - }, - .bit = PCU_DM_USB20, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain usb21_domain = { - .dm = { - .name = "usb21_domain", - }, - .bit = PCU_DM_USB21, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain usb30_domain = { - .dm = { - .name = "usb30_domain", - }, - .bit = PCU_DM_USB30, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain hsic_domain = { - .dm = { - .name = "hsic_domain", - }, - .bit = PCU_DM_HSIC, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain gmac_domain = { - .dm = { - .name = "gmac_domain", - }, - .bit = PCU_DM_GMAC, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct zx2967_pm_domain ts_domain = { - .dm = { - .name = "ts_domain", - }, - .bit = PCU_DM_TS, - .polarity = PWREN, - .reg_offset = zx296718_offsets, -}; - -static struct generic_pm_domain *zx296718_pm_domains[] = { - [DM_ZX296718_VOU] = &vou_domain.dm, - [DM_ZX296718_SAPPU] = &sappu_domain.dm, - [DM_ZX296718_VDE] = &vde_domain.dm, - [DM_ZX296718_VCE] = &vce_domain.dm, - [DM_ZX296718_HDE] = &hde_domain.dm, - [DM_ZX296718_VIU] = &viu_domain.dm, - [DM_ZX296718_USB20] = &usb20_domain.dm, - [DM_ZX296718_USB21] = &usb21_domain.dm, - [DM_ZX296718_USB30] = &usb30_domain.dm, - [DM_ZX296718_HSIC] = &hsic_domain.dm, - [DM_ZX296718_GMAC] = &gmac_domain.dm, - [DM_ZX296718_TS] = &ts_domain.dm, -}; - -static int zx296718_pd_probe(struct platform_device *pdev) -{ - return zx2967_pd_probe(pdev, - zx296718_pm_domains, - ARRAY_SIZE(zx296718_pm_domains)); -} - -static const struct of_device_id zx296718_pm_domain_matches[] = { - { .compatible = "zte,zx296718-pcu", }, - { }, -}; - -static struct platform_driver zx296718_pd_driver = { - .driver = { - .name = "zx296718-powerdomain", - .of_match_table = zx296718_pm_domain_matches, - }, - .probe = zx296718_pd_probe, -}; - -static int __init zx296718_pd_init(void) -{ - return platform_driver_register(&zx296718_pd_driver); -} -subsys_initcall(zx296718_pd_init); diff --git a/drivers/soc/zte/zx2967_pm_domains.c b/drivers/soc/zte/zx2967_pm_domains.c deleted file mode 100644 index a4503e31b616..000000000000 --- a/drivers/soc/zte/zx2967_pm_domains.c +++ /dev/null @@ -1,141 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2017 ZTE Ltd. - * - * Author: Baoyou Xie <baoyou.xie@linaro.org> - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> - -#include "zx2967_pm_domains.h" - -#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN]) -#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN]) -#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN]) -#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN]) -#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC]) - -static void __iomem *pcubase; - -static int zx2967_power_on(struct generic_pm_domain *domain) -{ - struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain; - unsigned long loop = 1000; - u32 val; - - val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); - if (zpd->polarity == PWREN) - val |= BIT(zpd->bit); - else - val &= ~BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); - - do { - udelay(1); - val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) - & BIT(zpd->bit); - } while (--loop && !val); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); - val |= BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); - udelay(5); - - val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); - val &= ~BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd)); - udelay(5); - - val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); - val |= BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd)); - udelay(5); - - pr_debug("poweron %s\n", domain->name); - - return 0; -} - -static int zx2967_power_off(struct generic_pm_domain *domain) -{ - struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain; - unsigned long loop = 1000; - u32 val; - - val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); - val &= ~BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd)); - udelay(5); - - val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); - val |= BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd)); - udelay(5); - - val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); - val &= ~BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); - udelay(5); - - val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); - if (zpd->polarity == PWREN) - val &= ~BIT(zpd->bit); - else - val |= BIT(zpd->bit); - writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); - - do { - udelay(1); - val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) - & BIT(zpd->bit); - } while (--loop && val); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - pr_debug("poweroff %s\n", domain->name); - - return 0; -} - -int zx2967_pd_probe(struct platform_device *pdev, - struct generic_pm_domain **zx_pm_domains, - int domain_num) -{ - struct genpd_onecell_data *genpd_data; - struct resource *res; - int i; - - genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); - if (!genpd_data) - return -ENOMEM; - - genpd_data->domains = zx_pm_domains; - genpd_data->num_domains = domain_num; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pcubase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(pcubase)) - return PTR_ERR(pcubase); - - for (i = 0; i < domain_num; ++i) { - zx_pm_domains[i]->power_on = zx2967_power_on; - zx_pm_domains[i]->power_off = zx2967_power_off; - - pm_genpd_init(zx_pm_domains[i], NULL, false); - } - - of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); - dev_info(&pdev->dev, "powerdomain init ok\n"); - return 0; -} diff --git a/drivers/soc/zte/zx2967_pm_domains.h b/drivers/soc/zte/zx2967_pm_domains.h deleted file mode 100644 index f586c02410ff..000000000000 --- a/drivers/soc/zte/zx2967_pm_domains.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Header for ZTE's Power Domain Driver support - * - * Copyright (C) 2017 ZTE Ltd. - * - * Author: Baoyou Xie <baoyou.xie@linaro.org> - */ - -#ifndef __ZTE_ZX2967_PM_DOMAIN_H -#define __ZTE_ZX2967_PM_DOMAIN_H - -#include <linux/platform_device.h> -#include <linux/pm_domain.h> - -enum { - REG_CLKEN, - REG_ISOEN, - REG_RSTEN, - REG_PWREN, - REG_PWRDN, - REG_ACK_SYNC, - - /* The size of the array - must be last */ - REG_ARRAY_SIZE, -}; - -enum zx2967_power_polarity { - PWREN, - PWRDN, -}; - -struct zx2967_pm_domain { - struct generic_pm_domain dm; - const u16 bit; - const enum zx2967_power_polarity polarity; - const u16 *reg_offset; -}; - -int zx2967_pd_probe(struct platform_device *pdev, - struct generic_pm_domain **zx_pm_domains, - int domain_num); - -#endif /* __ZTE_ZX2967_PM_DOMAIN_H */ |