summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/ata/pata_parport/epia.c442
1 files changed, 230 insertions, 212 deletions
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index f6db2f79fe99..920e9f40d401 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -1,14 +1,13 @@
-/*
- epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
- Under the terms of the GNU General Public License.
-
- epia.c is a low-level protocol driver for Shuttle Technologies
- EPIA parallel to IDE adapter chip. This device is now obsolete
- and has been replaced with the EPAT chip, which is supported
- by epat.c, however, some devices based on EPIA are still
- available.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998 Grant R. Guenther <grant@torque.net>
+ *
+ * epia.c is a low-level protocol driver for Shuttle Technologies
+ * EPIA parallel to IDE adapter chip. This device is now obsolete
+ * and has been replaced with the EPAT chip, which is supported
+ * by epat.c, however, some devices based on EPIA are still
+ * available.
+ */
#include <linux/module.h>
#include <linux/init.h>
@@ -19,255 +18,274 @@
#include <asm/io.h>
#include "pata_parport.h"
-/* mode codes: 0 nybble reads on port 1, 8-bit writes
- 1 5/3 reads on ports 1 & 2, 8-bit writes
- 2 8-bit reads and writes
- 3 8-bit EPP mode
- 4 16-bit EPP
- 5 32-bit EPP
-*/
-
-#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
-
-/* cont = 0 IDE register file
- cont = 1 IDE control registers
-*/
-
+/*
+ * mode codes: 0 nybble reads on port 1, 8-bit writes
+ * 1 5/3 reads on ports 1 & 2, 8-bit writes
+ * 2 8-bit reads and writes
+ * 3 8-bit EPP mode
+ * 4 16-bit EPP
+ * 5 32-bit EPP
+ */
+
+#define j44(a, b) (((a >> 4) & 0x0f) + (b & 0xf0))
+#define j53(a, b) (((a >> 3) & 0x1f) + ((b << 4) & 0xe0))
+
+/*
+ * cont = 0 IDE register file
+ * cont = 1 IDE control registers
+ */
static int cont_map[2] = { 0, 0x80 };
static int epia_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{ int a, b, r;
+{
+ int a, b, r;
regr += cont_map[cont];
- switch (pi->mode) {
-
- case 0: r = regr^0x39;
- w0(r); w2(1); w2(3); w0(r);
- a = r1(); w2(1); b = r1(); w2(4);
- return j44(a,b);
-
- case 1: r = regr^0x31;
- w0(r); w2(1); w0(r&0x37);
- w2(3); w2(5); w0(r|0xf0);
- a = r1(); b = r2(); w2(4);
- return j53(a,b);
-
- case 2: r = regr^0x29;
- w0(r); w2(1); w2(0X21); w2(0x23);
- a = r0(); w2(4);
- return a;
-
+ switch (pi->mode) {
+ case 0:
+ r = regr ^ 0x39;
+ w0(r); w2(1); w2(3); w0(r);
+ a = r1(); w2(1); b = r1(); w2(4);
+ return j44(a, b);
+ case 1:
+ r = regr ^ 0x31;
+ w0(r); w2(1); w0(r & 0x37);
+ w2(3); w2(5); w0(r | 0xf0);
+ a = r1(); b = r2(); w2(4);
+ return j53(a, b);
+ case 2:
+ r = regr^0x29;
+ w0(r); w2(1); w2(0X21); w2(0x23);
+ a = r0(); w2(4);
+ return a;
case 3:
case 4:
- case 5: w3(regr); w2(0x24); a = r4(); w2(4);
- return a;
+ case 5:
+ w3(regr); w2(0x24); a = r4(); w2(4);
+ return a;
+ }
- }
- return -1;
-}
+ return -1;
+}
static void epia_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{ int r;
+{
+ int r;
regr += cont_map[cont];
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: r = regr^0x19;
- w0(r); w2(1); w0(val); w2(3); w2(4);
- break;
-
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ case 2:
+ r = regr ^ 0x19;
+ w0(r); w2(1); w0(val); w2(3); w2(4);
+ break;
case 3:
case 4:
- case 5: r = regr^0x40;
- w3(r); w4(val); w2(4);
- break;
- }
+ case 5:
+ r = regr ^ 0x40;
+ w3(r); w4(val); w2(4);
+ break;
+ }
}
-#define WR(r,v) epia_write_regr(pi,0,r,v)
-#define RR(r) (epia_read_regr(pi,0,r))
-
-/* The use of register 0x84 is entirely unclear - it seems to control
- some EPP counters ... currently we know about 3 different block
- sizes: the standard 512 byte reads and writes, 12 byte writes and
- 2048 byte reads (the last two being used in the CDrom drivers.
-*/
+#define WR(r, v) epia_write_regr(pi, 0, r, v)
+#define RR(r) epia_read_regr(pi, 0, r)
+/*
+ * The use of register 0x84 is entirely unclear - it seems to control
+ * some EPP counters ... currently we know about 3 different block
+ * sizes: the standard 512 byte reads and writes, 12 byte writes and
+ * 2048 byte reads (the last two being used in the CDrom drivers.
+ */
static void epia_connect(struct pi_adapter *pi)
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
- w2(1); w2(4);
- if (pi->mode >= 3) {
- w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
- w2(0x24); w2(0x26); w2(4);
- }
- WR(0x86,8);
+{
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
+ w2(1); w2(4);
+ if (pi->mode >= 3) {
+ w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
+ w2(0x24); w2(0x26); w2(4);
+ }
+ WR(0x86, 8);
}
static void epia_disconnect(struct pi_adapter *pi)
-
-{ /* WR(0x84,0x10); */
- w0(pi->saved_r0);
- w2(1); w2(4);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
+{
+ /* WR(0x84,0x10); */
+ w0(pi->saved_r0);
+ w2(1); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
static void epia_read_block(struct pi_adapter *pi, char *buf, int count)
-{ int k, ph, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(2+ph); a = r1();
- w2(4+ph); b = r1();
- buf[k] = j44(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 1: w0(0x91); w2(1); w0(0x10); w2(3);
- w0(0x51); w2(5); w0(0xd1);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(4+ph);
- a = r1(); b = r2();
- buf[k] = j53(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 2: w0(0x89); w2(1); w2(0x23); w2(0x21);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(0x24+ph);
- buf[k] = r0();
- ph = 1 - ph;
- }
- w2(6); w2(4);
- break;
-
- case 3: if (count > 512) WR(0x84,3);
+{
+ int k, ph, a, b;
+
+ switch (pi->mode) {
+ case 0:
+ w0(0x81); w2(1); w2(3); w0(0xc1);
+ ph = 1;
+ for (k = 0; k < count; k++) {
+ w2(2+ph); a = r1();
+ w2(4+ph); b = r1();
+ buf[k] = j44(a, b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+ case 1:
+ w0(0x91); w2(1); w0(0x10); w2(3);
+ w0(0x51); w2(5); w0(0xd1);
+ ph = 1;
+ for (k = 0; k < count; k++) {
+ w2(4 + ph);
+ a = r1(); b = r2();
+ buf[k] = j53(a, b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+ case 2:
+ w0(0x89); w2(1); w2(0x23); w2(0x21);
+ ph = 1;
+ for (k = 0; k < count; k++) {
+ w2(0x24 + ph);
+ buf[k] = r0();
+ ph = 1 - ph;
+ }
+ w2(6); w2(4);
+ break;
+ case 3:
+ if (count > 512)
+ WR(0x84, 3);
w3(0); w2(0x24);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4); WR(0x84,0);
- break;
-
- case 4: if (count > 512) WR(0x84,3);
+ for (k = 0; k < count; k++)
+ buf[k] = r4();
+ w2(4); WR(0x84, 0);
+ break;
+ case 4:
+ if (count > 512)
+ WR(0x84, 3);
w3(0); w2(0x24);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4); WR(0x84,0);
- break;
-
- case 5: if (count > 512) WR(0x84,3);
+ for (k = 0; k < count / 2; k++)
+ ((u16 *)buf)[k] = r4w();
+ w2(4); WR(0x84, 0);
+ break;
+ case 5:
+ if (count > 512)
+ WR(0x84, 3);
w3(0); w2(0x24);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4); WR(0x84,0);
- break;
-
- }
+ for (k = 0; k < count / 4; k++)
+ ((u32 *)buf)[k] = r4l();
+ w2(4); WR(0x84, 0);
+ break;
+ }
}
static void epia_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{ int ph, k, last, d;
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
- ph = 0; last = 0x8000;
- for (k=0;k<count;k++) {
- d = buf[k];
- if (d != last) { last = d; w0(d); }
- w2(4+ph);
- ph = 1 - ph;
- }
- w2(7); w2(4);
- break;
-
- case 3: if (count < 512) WR(0x84,1);
+{
+ int ph, k, last, d;
+
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ case 2:
+ w0(0xa1); w2(1); w2(3); w2(1); w2(5);
+ ph = 0; last = 0x8000;
+ for (k = 0; k < count; k++) {
+ d = buf[k];
+ if (d != last) {
+ last = d;
+ w0(d);
+ }
+ w2(4 + ph);
+ ph = 1 - ph;
+ }
+ w2(7); w2(4);
+ break;
+ case 3:
+ if (count < 512)
+ WR(0x84, 1);
w3(0x40);
- for (k=0;k<count;k++) w4(buf[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- case 4: if (count < 512) WR(0x84,1);
+ for (k = 0; k < count; k++)
+ w4(buf[k]);
+ if (count < 512)
+ WR(0x84, 0);
+ break;
+ case 4:
+ if (count < 512)
+ WR(0x84, 1);
w3(0x40);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- case 5: if (count < 512) WR(0x84,1);
+ for (k = 0; k < count / 2; k++)
+ w4w(((u16 *)buf)[k]);
+ if (count < 512)
+ WR(0x84, 0);
+ break;
+ case 5:
+ if (count < 512)
+ WR(0x84, 1);
w3(0x40);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- }
-
+ for (k = 0; k < count / 4; k++)
+ w4l(((u32 *)buf)[k]);
+ if (count < 512)
+ WR(0x84, 0);
+ break;
+ }
}
static int epia_test_proto(struct pi_adapter *pi)
-
-{ int j, k, f;
- int e[2] = {0,0};
+{
+ int j, k, f;
+ int e[2] = { 0, 0 };
char scratch[512];
- epia_connect(pi);
- for (j=0;j<2;j++) {
- WR(6,0xa0+j*0x10);
- for (k=0;k<256;k++) {
- WR(2,k^0xaa);
- WR(3,k^0x55);
- if (RR(2) != (k^0xaa)) e[j]++;
- }
- WR(2,1); WR(3,1);
- }
- epia_disconnect(pi);
-
- f = 0;
- epia_connect(pi);
- WR(0x84,8);
- epia_read_block(pi,scratch,512);
- for (k=0;k<256;k++) {
- if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
- if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
- }
- WR(0x84,0);
- epia_disconnect(pi);
+ epia_connect(pi);
+ for (j = 0; j < 2; j++) {
+ WR(6, 0xa0 + j * 0x10);
+ for (k = 0; k < 256; k++) {
+ WR(2, k ^ 0xaa);
+ WR(3, k ^ 0x55);
+ if (RR(2) != (k ^ 0xaa))
+ e[j]++;
+ }
+ WR(2, 1); WR(3, 1);
+ }
+ epia_disconnect(pi);
+
+ f = 0;
+ epia_connect(pi);
+ WR(0x84, 8);
+ epia_read_block(pi, scratch, 512);
+ for (k = 0; k < 256; k++) {
+ if ((scratch[2 * k] & 0xff) != ((k + 1) & 0xff))
+ f++;
+ if ((scratch[2 * k + 1] & 0xff) != ((-2 - k) & 0xff))
+ f++;
+ }
+ WR(0x84, 0);
+ epia_disconnect(pi);
dev_dbg(&pi->dev, "epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], f);
-
- return (e[0] && e[1]) || f;
+ pi->port, pi->mode, e[0], e[1], f);
+ return (e[0] && e[1]) || f;
}
static void epia_log_adapter(struct pi_adapter *pi)
+{
+ char *mode[6] = { "4-bit", "5/3", "8-bit", "EPP-8", "EPP-16", "EPP-32"};
-{ char *mode_string[6] = {"4-bit","5/3","8-bit",
- "EPP-8","EPP-16","EPP-32"};
-
- dev_info(&pi->dev, "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
- pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+ dev_info(&pi->dev,
+ "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode[pi->mode], pi->delay);
}
static struct pi_protocol epia = {
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-26 18:31:29 +0000