diff options
| -rw-r--r-- | drivers/gpio/gpio-mvebu.c | 101 |
1 files changed, 68 insertions, 33 deletions
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 75e3c235bd3a..8f429d9f3661 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -70,7 +70,12 @@ */ #define PWM_BLINK_ON_DURATION_OFF 0x0 #define PWM_BLINK_OFF_DURATION_OFF 0x4 +#define PWM_BLINK_COUNTER_B_OFF 0x8 +/* Armada 8k variant gpios register offsets */ +#define AP80X_GPIO0_OFF_A8K 0x1040 +#define CP11X_GPIO0_OFF_A8K 0x100 +#define CP11X_GPIO1_OFF_A8K 0x140 /* The MV78200 has per-CPU registers for edge mask and level mask */ #define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) @@ -93,6 +98,7 @@ struct mvebu_pwm { struct regmap *regs; + u32 offset; unsigned long clk_rate; struct gpio_desc *gpiod; struct pwm_chip chip; @@ -283,12 +289,12 @@ mvebu_gpio_write_level_mask(struct mvebu_gpio_chip *mvchip, u32 val) */ static unsigned int mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *mvpwm) { - return PWM_BLINK_ON_DURATION_OFF; + return mvpwm->offset + PWM_BLINK_ON_DURATION_OFF; } static unsigned int mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *mvpwm) { - return PWM_BLINK_OFF_DURATION_OFF; + return mvpwm->offset + PWM_BLINK_OFF_DURATION_OFF; } /* @@ -781,51 +787,80 @@ static int mvebu_pwm_probe(struct platform_device *pdev, struct device *dev = &pdev->dev; struct mvebu_pwm *mvpwm; void __iomem *base; + u32 offset; u32 set; - if (!of_device_is_compatible(mvchip->chip.of_node, - "marvell,armada-370-gpio")) - return 0; - - /* - * There are only two sets of PWM configuration registers for - * all the GPIO lines on those SoCs which this driver reserves - * for the first two GPIO chips. So if the resource is missing - * we can't treat it as an error. - */ - if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm")) + if (of_device_is_compatible(mvchip->chip.of_node, + "marvell,armada-370-gpio")) { + /* + * There are only two sets of PWM configuration registers for + * all the GPIO lines on those SoCs which this driver reserves + * for the first two GPIO chips. So if the resource is missing + * we can't treat it as an error. + */ + if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm")) + return 0; + offset = 0; + } else if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) { + int ret = of_property_read_u32(dev->of_node, + "marvell,pwm-offset", &offset); + if (ret < 0) + return 0; + } else { return 0; + } if (IS_ERR(mvchip->clk)) return PTR_ERR(mvchip->clk); - /* - * Use set A for lines of GPIO chip with id 0, B for GPIO chip - * with id 1. Don't allow further GPIO chips to be used for PWM. - */ - if (id == 0) - set = 0; - else if (id == 1) - set = U32_MAX; - else - return -EINVAL; - regmap_write(mvchip->regs, - GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set); - mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL); if (!mvpwm) return -ENOMEM; mvchip->mvpwm = mvpwm; mvpwm->mvchip = mvchip; + mvpwm->offset = offset; + + if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) { + mvpwm->regs = mvchip->regs; + + switch (mvchip->offset) { + case AP80X_GPIO0_OFF_A8K: + case CP11X_GPIO0_OFF_A8K: + /* Blink counter A */ + set = 0; + break; + case CP11X_GPIO1_OFF_A8K: + /* Blink counter B */ + set = U32_MAX; + mvpwm->offset += PWM_BLINK_COUNTER_B_OFF; + break; + default: + return -EINVAL; + } + } else { + base = devm_platform_ioremap_resource_byname(pdev, "pwm"); + if (IS_ERR(base)) + return PTR_ERR(base); - base = devm_platform_ioremap_resource_byname(pdev, "pwm"); - if (IS_ERR(base)) - return PTR_ERR(base); + mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base, + &mvebu_gpio_regmap_config); + if (IS_ERR(mvpwm->regs)) + return PTR_ERR(mvpwm->regs); - mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base, - &mvebu_gpio_regmap_config); - if (IS_ERR(mvpwm->regs)) - return PTR_ERR(mvpwm->regs); + /* + * Use set A for lines of GPIO chip with id 0, B for GPIO chip + * with id 1. Don't allow further GPIO chips to be used for PWM. + */ + if (id == 0) + set = 0; + else if (id == 1) + set = U32_MAX; + else + return -EINVAL; + } + + regmap_write(mvchip->regs, + GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set); mvpwm->clk_rate = clk_get_rate(mvchip->clk); if (!mvpwm->clk_rate) { |