diff options
103 files changed, 9613 insertions, 3881 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-intel-ifs b/Documentation/ABI/testing/sysfs-platform-intel-ifs index 55991983d0d0..41b4d5b1e21c 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-ifs +++ b/Documentation/ABI/testing/sysfs-platform-intel-ifs @@ -1,3 +1,7 @@ +Device instance to test mapping +intel_ifs_0 -> Scan Test +intel_ifs_1 -> Array BIST test + What: /sys/devices/virtual/misc/intel_ifs_<N>/run_test Date: Nov 16 2022 KernelVersion: 6.2 @@ -8,6 +12,7 @@ Description: Write <cpu#> to trigger IFS test for one online core. completes the test for the core containing that thread. Example: to test the core containing cpu5: echo 5 > /sys/devices/virtual/misc/intel_ifs_<N>/run_test +Devices: all What: /sys/devices/virtual/misc/intel_ifs_<N>/status Date: Nov 16 2022 @@ -15,21 +20,25 @@ KernelVersion: 6.2 Contact: "Jithu Joseph" <jithu.joseph@intel.com> Description: The status of the last test. It can be one of "pass", "fail" or "untested". +Devices: all What: /sys/devices/virtual/misc/intel_ifs_<N>/details Date: Nov 16 2022 KernelVersion: 6.2 Contact: "Jithu Joseph" <jithu.joseph@intel.com> Description: Additional information regarding the last test. The details file reports - the hex value of the SCAN_STATUS MSR. Note that the error_code field + the hex value of the STATUS MSR for this test. Note that the error_code field may contain driver defined software code not defined in the Intel SDM. +Devices: all What: /sys/devices/virtual/misc/intel_ifs_<N>/image_version Date: Nov 16 2022 KernelVersion: 6.2 Contact: "Jithu Joseph" <jithu.joseph@intel.com> -Description: Version (hexadecimal) of loaded IFS binary image. If no scan image - is loaded reports "none". +Description: Version (hexadecimal) of loaded IFS test image. If no test image + is loaded reports "none". Only present for device instances where a test image + is applicable. +Devices: intel_ifs_0 What: /sys/devices/virtual/misc/intel_ifs_<N>/current_batch Date: Nov 16 2022 @@ -39,3 +48,5 @@ Description: Write a number less than or equal to 0xff to load an IFS test image The number written treated as the 2 digit suffix in the following file name: /lib/firmware/intel/ifs_<N>/ff-mm-ss-02x.scan Reading the file will provide the suffix of the currently loaded IFS test image. + This file is present only for device instances where a test image is applicable. +Devices: intel_ifs_0 diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index e79ca22e2f45..9b99a81babb1 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -68,3 +68,10 @@ Description: Wasted burnt and invalid Invalid not burnt but marked as valid (error state). ======= =============================================== + +What: /sys/bus/platform/devices/MLNXBF04:00/bootfifo +Date: Apr 2023 +KernelVersion: 6.4 +Contact: "Liming Sun <limings@nvidia.com>" +Description: + The file used to access the BlueField boot fifo. diff --git a/MAINTAINERS b/MAINTAINERS index bd28bbdb3c09..79c521bf1e95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14148,6 +14148,13 @@ S: Odd Fixes F: Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt F: drivers/net/ieee802154/mrf24j40.c +MSI EC DRIVER +M: Nikita Kravets <teackot@gmail.com> +L: platform-driver-x86@vger.kernel.org +S: Maintained +W: https://github.com/BeardOverflow/msi-ec +F: drivers/platform/x86/msi-ec.* + MSI LAPTOP SUPPORT M: "Lee, Chun-Yi" <jlee@suse.com> L: platform-driver-x86@vger.kernel.org @@ -16330,12 +16337,6 @@ S: Maintained F: crypto/pcrypt.c F: include/crypto/pcrypt.h -PEAQ WMI HOTKEYS DRIVER -M: Hans de Goede <hdegoede@redhat.com> -L: platform-driver-x86@vger.kernel.org -S: Maintained -F: drivers/platform/x86/peaq-wmi.c - PECI HARDWARE MONITORING DRIVERS M: Iwona Winiarska <iwona.winiarska@intel.com> L: linux-hwmon@vger.kernel.org @@ -22725,7 +22726,7 @@ M: Hans de Goede <hdegoede@redhat.com> L: platform-driver-x86@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git -F: drivers/platform/x86/x86-android-tablets.c +F: drivers/platform/x86/x86-android-tablets/ X86 PLATFORM DRIVERS M: Hans de Goede <hdegoede@redhat.com> diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index ad35355ee43e..3aedae61af4f 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -206,6 +206,8 @@ /* Abbreviated from Intel SDM name IA32_INTEGRITY_CAPABILITIES */ #define MSR_INTEGRITY_CAPS 0x000002d9 +#define MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT 2 +#define MSR_INTEGRITY_CAPS_ARRAY_BIST BIT(MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT) #define MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT 4 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST BIT(MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT) diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c b/drivers/platform/mellanox/mlxbf-bootctl.c index 1c7a288b59a5..1bad1d278672 100644 --- a/drivers/platform/mellanox/mlxbf-bootctl.c +++ b/drivers/platform/mellanox/mlxbf-bootctl.c @@ -10,6 +10,7 @@ #include <linux/acpi.h> #include <linux/arm-smccc.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -44,6 +45,10 @@ static const char * const mlxbf_bootctl_lifecycle_states[] = { [3] = "RMA", }; +/* Mapped pointer for RSH_BOOT_FIFO_DATA and RSH_BOOT_FIFO_COUNT register. */ +static void __iomem *mlxbf_rsh_boot_data; +static void __iomem *mlxbf_rsh_boot_cnt; + /* ARM SMC call which is atomic and no need for lock. */ static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg) { @@ -244,11 +249,29 @@ static ssize_t secure_boot_fuse_state_show(struct device *dev, return buf_len; } +static ssize_t fw_reset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long key; + int err; + + err = kstrtoul(buf, 16, &key); + if (err) + return err; + + if (mlxbf_bootctl_smc(MLXBF_BOOTCTL_FW_RESET, key) < 0) + return -EINVAL; + + return count; +} + static DEVICE_ATTR_RW(post_reset_wdog); static DEVICE_ATTR_RW(reset_action); static DEVICE_ATTR_RW(second_reset_action); static DEVICE_ATTR_RO(lifecycle_state); static DEVICE_ATTR_RO(secure_boot_fuse_state); +static DEVICE_ATTR_WO(fw_reset); static struct attribute *mlxbf_bootctl_attrs[] = { &dev_attr_post_reset_wdog.attr, @@ -256,6 +279,7 @@ static struct attribute *mlxbf_bootctl_attrs[] = { &dev_attr_second_reset_action.attr, &dev_attr_lifecycle_state.attr, &dev_attr_secure_boot_fuse_state.attr, + &dev_attr_fw_reset.attr, NULL }; @@ -268,6 +292,45 @@ static const struct acpi_device_id mlxbf_bootctl_acpi_ids[] = { MODULE_DEVICE_TABLE(acpi, mlxbf_bootctl_acpi_ids); +static ssize_t mlxbf_bootctl_bootfifo_read(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, + size_t count) +{ + unsigned long timeout = msecs_to_jiffies(500); + unsigned long expire = jiffies + timeout; + u64 data, cnt = 0; + char *p = buf; + + while (count >= sizeof(data)) { + /* Give up reading if no more data within 500ms. */ + if (!cnt) { + cnt = readq(mlxbf_rsh_boot_cnt); + if (!cnt) { + if (time_after(jiffies, expire)) + break; + usleep_range(10, 50); + continue; + } + } + + data = readq(mlxbf_rsh_boot_data); + memcpy(p, &data, sizeof(data)); + count -= sizeof(data); + p += sizeof(data); + cnt--; + expire = jiffies + timeout; + } + + return p - buf; +} + +static struct bin_attribute mlxbf_bootctl_bootfifo_sysfs_attr = { + .attr = { .name = "bootfifo", .mode = 0400 }, + .read = mlxbf_bootctl_bootfifo_read, +}; + static bool mlxbf_bootctl_guid_match(const guid_t *guid, const struct arm_smccc_res *res) { @@ -285,6 +348,16 @@ static int mlxbf_bootctl_probe(struct platform_device *pdev) guid_t guid; int ret; + /* Get the resource of the bootfifo data register. */ + mlxbf_rsh_boot_data = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mlxbf_rsh_boot_data)) + return PTR_ERR(mlxbf_rsh_boot_data); + + /* Get the resource of the bootfifo counter register. */ + mlxbf_rsh_boot_cnt = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(mlxbf_rsh_boot_cnt)) + return PTR_ERR(mlxbf_rsh_boot_cnt); + /* Ensure we have the UUID we expect for this service. */ arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, &res); guid_parse(mlxbf_bootctl_svc_uuid_str, &guid); @@ -302,11 +375,25 @@ static int mlxbf_bootctl_probe(struct platform_device *pdev) if (ret < 0) dev_warn(&pdev->dev, "Unable to reset the EMMC boot mode\n"); + ret = sysfs_create_bin_file(&pdev->dev.kobj, + &mlxbf_bootctl_bootfifo_sysfs_attr); + if (ret) + pr_err("Unable to create bootfifo sysfs file, error %d\n", ret); + + return ret; +} + +static int mlxbf_bootctl_remove(struct platform_device *pdev) +{ + sysfs_remove_bin_file(&pdev->dev.kobj, + &mlxbf_bootctl_bootfifo_sysfs_attr); + return 0; } static struct platform_driver mlxbf_bootctl_driver = { .probe = mlxbf_bootctl_probe, + .remove = mlxbf_bootctl_remove, .driver = { .name = "mlxbf-bootctl", .dev_groups = mlxbf_bootctl_groups, diff --git a/drivers/platform/mellanox/mlxbf-bootctl.h b/drivers/platform/mellanox/mlxbf-bootctl.h index 148fdb43b435..b48243f60a59 100644 --- a/drivers/platform/mellanox/mlxbf-bootctl.h +++ b/drivers/platform/mellanox/mlxbf-bootctl.h @@ -75,6 +75,12 @@ #define MLXBF_BOOTCTL_GET_DIMM_INFO 0x82000008 +/* + * Initiate Firmware Reset via TYU. This might be invoked during the reset + * flow in isolation mode. + */ +#define MLXBF_BOOTCTL_FW_RESET 0x8200000D + /* SMC function IDs for SiP Service queries */ #define MLXBF_BOOTCTL_SIP_SVC_CALL_COUNT 0x8200ff00 #define MLXBF_BOOTCTL_SIP_SVC_UID 0x8200ff01 diff --git a/drivers/platform/olpc/olpc-xo175-ec.c b/drivers/platform/olpc/olpc-xo175-ec.c index 4823bd2819f6..62ccbcb15c74 100644 --- a/drivers/platform/olpc/olpc-xo175-ec.c +++ b/drivers/platform/olpc/olpc-xo175-ec.c @@ -746,6 +746,7 @@ static struct spi_driver olpc_xo175_ec_spi_driver = { .of_match_table = olpc_xo175_ec_of_match, .pm = &olpc_xo175_ec_pm_ops, }, + .id_table = olpc_xo175_ec_id_table, .probe = olpc_xo175_ec_probe, .remove = olpc_xo175_ec_remove, }; diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 296f72d52e6a..0fe5be539652 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -305,7 +305,7 @@ static const struct software_node *ssam_node_group_sp9[] = { &ssam_node_bat_ac, &ssam_node_bat_main, &ssam_node_tmp_pprof, - /* TODO: Tablet mode switch (via POS subsystem) */ + &ssam_node_pos_tablet_switch, &ssam_node_hid_kip_keyboard, &ssam_node_hid_kip_penstash, &ssam_node_hid_kip_touchpad, diff --git a/drivers/platform/surface/surface_aggregator_tabletsw.c b/drivers/platform/surface/surface_aggregator_tabletsw.c index 9fed800c7cc0..8f52b62d1c19 100644 --- a/drivers/platform/surface/surface_aggregator_tabletsw.c +++ b/drivers/platform/surface/surface_aggregator_tabletsw.c @@ -20,16 +20,23 @@ struct ssam_tablet_sw; +struct ssam_tablet_sw_state { + u32 source; + u32 state; +}; + struct ssam_tablet_sw_ops { - int (*get_state)(struct ssam_tablet_sw *sw, u32 *state); - const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state); - bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state); + int (*get_state)(struct ssam_tablet_sw *sw, struct ssam_tablet_sw_state *state); + const char *(*state_name)(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state); + bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state); }; struct ssam_tablet_sw { struct ssam_device *sdev; - u32 state; + struct ssam_tablet_sw_state state; struct work_struct update_work; struct input_dev *mode_switch; @@ -45,9 +52,11 @@ struct ssam_tablet_sw_desc { struct { u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event); - int (*get_state)(struct ssam_tablet_sw *sw, u32 *state); - const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state); - bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state); + int (*get_state)(struct ssam_tablet_sw *sw, struct ssam_tablet_sw_state *state); + const char *(*state_name)(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state); + bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state); } ops; struct { @@ -61,7 +70,7 @@ struct ssam_tablet_sw_desc { static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct ssam_tablet_sw *sw = dev_get_drvdata(dev); - const char *state = sw->ops.state_name(sw, sw->state); + const char *state = sw->ops.state_name(sw, &sw->state); return sysfs_emit(buf, "%s\n", state); } @@ -79,19 +88,19 @@ static const struct attribute_group ssam_tablet_sw_group = { static void ssam_tablet_sw_update_workfn(struct work_struct *work) { struct ssam_tablet_sw *sw = container_of(work, struct ssam_tablet_sw, update_work); + struct ssam_tablet_sw_state state; int tablet, status; - u32 state; status = sw->ops.get_state(sw, &state); if (status) return; - if (sw->state == state) + if (sw->state.source == state.source && sw->state.state == state.state) return; sw->state = state; /* Send SW_TABLET_MODE event. */ - tablet = sw->ops.state_is_tablet_mode(sw, state); + tablet = sw->ops.state_is_tablet_mode(sw, &state); input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet); input_sync(sw->mode_switch); } @@ -146,7 +155,7 @@ static int ssam_tablet_sw_probe(struct ssam_device *sdev) sw->mode_switch->id.bustype = BUS_HOST; sw->mode_switch->dev.parent = &sdev->dev; - tablet = sw->ops.state_is_tablet_mode(sw, sw->state); + tablet = sw->ops.state_is_tablet_mode(sw, &sw->state); input_set_capability(sw->mode_switch, EV_SW, SW_TABLET_MODE); input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet); @@ -203,9 +212,10 @@ enum ssam_kip_cover_state { SSAM_KIP_COVER_STATE_FOLDED_BACK = 0x05, }; -static const char *ssam_kip_cover_state_name(struct ssam_tablet_sw *sw, u32 state) +static const char *ssam_kip_cover_state_name(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state) { - switch (state) { + switch (state->state) { case SSAM_KIP_COVER_STATE_DISCONNECTED: return "disconnected"; @@ -222,14 +232,15 @@ static const char *ssam_kip_cover_state_name(struct ssam_tablet_sw *sw, u32 stat return "folded-back"; default: - dev_warn(&sw->sdev->dev, "unknown KIP cover state: %u\n", state); + dev_warn(&sw->sdev->dev, "unknown KIP cover state: %u\n", state->state); return "<unknown>"; } } -static bool ssam_kip_cover_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state) +static bool ssam_kip_cover_state_is_tablet_mode(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state) { - switch (state) { + switch (state->state) { case SSAM_KIP_COVER_STATE_DISCONNECTED: case SSAM_KIP_COVER_STATE_FOLDED_CANVAS: case SSAM_KIP_COVER_STATE_FOLDED_BACK: @@ -240,7 +251,7 @@ static bool ssam_kip_cover_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 s return false; default: - dev_warn(&sw->sdev->dev, "unknown KIP cover state: %d\n", sw->state); + dev_warn(&sw->sdev->dev, "unknown KIP cover state: %d\n", state->state); return true; } } @@ -252,7 +263,7 @@ SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_cover_state, u8, { .instance_id = 0x00, }); -static int ssam_kip_get_cover_state(struct ssam_tablet_sw *sw, u32 *state) +static int ssam_kip_get_cover_state(struct ssam_tablet_sw *sw, struct ssam_tablet_sw_state *state) { int status; u8 raw; @@ -263,7 +274,8 @@ static int ssam_kip_get_cover_state(struct ssam_tablet_sw *sw, u32 *state) return status; } - *state = raw; + state->source = 0; /* Unused for KIP switch. */ + state->state = raw; return 0; } @@ -312,11 +324,24 @@ MODULE_PARM_DESC(tablet_mode_in_slate_state, "Enable tablet mode in slate device #define SSAM_EVENT_POS_CID_POSTURE_CHANGED 0x03 #define SSAM_POS_MAX_SOURCES 4 -enum ssam_pos_state { - SSAM_POS_POSTURE_LID_CLOSED = 0x00, - SSAM_POS_POSTURE_LAPTOP = 0x01, - SSAM_POS_POSTURE_SLATE = 0x02, - SSAM_POS_POSTURE_TABLET = 0x03, +enum ssam_pos_source_id { + SSAM_POS_SOURCE_COVER = 0x00, + SSAM_POS_SOURCE_SLS = 0x03, +}; + +enum ssam_pos_state_cover { + SSAM_POS_COVER_DISCONNECTED = 0x01, + SSAM_POS_COVER_CLOSED = 0x02, + SSAM_POS_COVER_LAPTOP = 0x03, + SSAM_POS_COVER_FOLDED_CANVAS = 0x04, + SSAM_POS_COVER_FOLDED_BACK = 0x05, +}; + +enum ssam_pos_state_sls { + SSAM_POS_SLS_LID_CLOSED = 0x00, + SSAM_POS_SLS_LAPTOP = 0x01, + SSAM_POS_SLS_SLATE = 0x02, + SSAM_POS_SLS_TABLET = 0x03, }; struct ssam_sources_list { @@ -324,42 +349,116 @@ struct ssam_sources_list { __le32 id[SSAM_POS_MAX_SOURCES]; } __packed; -static const char *ssam_pos_state_name(struct ssam_tablet_sw *sw, u32 state) +static const char *ssam_pos_state_name_cover(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_POS_COVER_DISCONNECTED: + return "disconnected"; + + case SSAM_POS_COVER_CLOSED: + return "closed"; + + case SSAM_POS_COVER_LAPTOP: + return "laptop"; + + case SSAM_POS_COVER_FOLDED_CANVAS: + return "folded-canvas"; + + case SSAM_POS_COVER_FOLDED_BACK: + return "folded-back"; + + default: + dev_warn(&sw->sdev->dev, "unknown device posture for type-cover: %u\n", state); + return "<unknown>"; + } +} + +static const char *ssam_pos_state_name_sls(struct ssam_tablet_sw *sw, u32 state) { switch (state) { - case SSAM_POS_POSTURE_LID_CLOSED: + case SSAM_POS_SLS_LID_CLOSED: return "closed"; - case SSAM_POS_POSTURE_LAPTOP: + case SSAM_POS_SLS_LAPTOP: return "laptop"; - case SSAM_POS_POSTURE_SLATE: + case SSAM_POS_SLS_SLATE: return "slate"; - case SSAM_POS_POSTURE_TABLET: + case SSAM_POS_SLS_TABLET: return "tablet"; default: - dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state); + dev_warn(&sw->sdev->dev, "unknown device posture for SLS: %u\n", state); return "<unknown>"; } } -static bool ssam_pos_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state) +static const char *ssam_pos_state_name(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state) +{ + switch (state->source) { + case SSAM_POS_SOURCE_COVER: + return ssam_pos_state_name_cover(sw, state->state); + + case SSAM_POS_SOURCE_SLS: + return ssam_pos_state_name_sls(sw, state->state); + + default: + dev_warn(&sw->sdev->dev, "unknown device posture source: %u\n", state->source); + return "<unknown>"; + } +} + +static bool ssam_pos_state_is_tablet_mode_cover(struct ssam_tablet_sw *sw, u32 state) { switch (state) { - case SSAM_POS_POSTURE_LAPTOP: - case SSAM_POS_POSTURE_LID_CLOSED: + case SSAM_POS_COVER_DISCONNECTED: + case SSAM_POS_COVER_FOLDED_CANVAS: + case SSAM_POS_COVER_FOLDED_BACK: + return true; + + case SSAM_POS_COVER_CLOSED: + case SSAM_POS_COVER_LAPTOP: return false; - case SSAM_POS_POSTURE_SLATE: + default: + dev_warn(&sw->sdev->dev, "unknown device posture for type-cover: %u\n", state); + return true; + } +} + +static bool ssam_pos_state_is_tablet_mode_sls(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_POS_SLS_LAPTOP: + case SSAM_POS_SLS_LID_CLOSED: + return false; + + case SSAM_POS_SLS_SLATE: return tablet_mode_in_slate_state; - case SSAM_POS_POSTURE_TABLET: + case SSAM_POS_SLS_TABLET: return true; default: - dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state); + dev_warn(&sw->sdev->dev, "unknown device posture for SLS: %u\n", state); + return true; + } +} + +static bool ssam_pos_state_is_tablet_mode(struct ssam_tablet_sw *sw, + const struct ssam_tablet_sw_state *state) +{ + switch (state->source) { + case SSAM_POS_SOURCE_COVER: + return ssam_pos_state_is_tablet_mode_cover(sw, state->state); + + case SSAM_POS_SOURCE_SLS: + return ssam_pos_state_is_tablet_mode_sls(sw, state->state); + + default: + dev_warn(&sw->sdev->dev, "unknown device posture source: %u\n", state->source); return true; } } @@ -450,9 +549,10 @@ static int ssam_pos_get_posture_for_source(struct ssam_tablet_sw *sw, u32 source return 0; } -static int ssam_pos_get_posture(struct ssam_tablet_sw *sw, u32 *state) +static int ssam_pos_get_posture(struct ssam_tablet_sw *sw, struct ssam_tablet_sw_state *state) { u32 source_id; + u32 source_state; int status; status = ssam_pos_get_source(sw, &source_id); @@ -461,13 +561,15 @@ static int ssam_pos_get_posture(struct ssam_tablet_sw *sw, u32 *state) return status; } - status = ssam_pos_get_posture_for_source(sw, source_id, state); + status = ssam_pos_get_posture_for_source(sw, source_id, &source_state); if (status) { dev_err(&sw->sdev->dev, "failed to get posture value for source %u: %d\n", source_id, status); return status; } + state->source = source_id; + state->state = source_state; return 0; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 4a01b315e0a9..22052031c719 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -84,13 +84,6 @@ config MXM_WMI MXM is a standard for laptop graphics cards, the WMI interface is required for switchable nvidia graphics machines -config PEAQ_WMI - tristate "PEAQ 2-in-1 WMI hotkey driver" - depends on ACPI_WMI - depends on INPUT - help - Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s. - config NVIDIA_WMI_EC_BACKLIGHT tristate "EC Backlight Driver for Hybrid Graphics Notebook Systems" depends on ACPI_VIDEO @@ -213,7 +206,6 @@ config APPLE_GMUX depends on ACPI && PCI depends on PNP depends on BACKLIGHT_CLASS_DEVICE - depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE help This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid @@ -469,6 +461,15 @@ config IDEAPAD_LAPTOP This is a driver for Lenovo IdeaPad netbooks contains drivers for rfkill switch, hotkey, fan control and backlight control. +config LENOVO_YMC + tristate "Lenovo Yoga Tablet Mode Control" + depends on ACPI_WMI + depends on INPUT + select INPUT_SPARSEKMAP + help + This driver maps the Tablet Mode Control switch to SW_TABLET_MODE input + events for Lenovo Yoga notebooks. + config SENSORS_HDAPS tristate "Thinkpad Hard Drive Active Protection System (hdaps)" depends on INPUT @@ -643,6 +644,14 @@ config THINKPAD_LMI source "drivers/platform/x86/intel/Kconfig" +config MSI_EC + tristate "MSI EC Extras" + depends on ACPI + depends on ACPI_BATTERY + help + This driver allows various MSI laptops' functionalities to be + controlled from userspace, including battery charge threshold. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on ACPI @@ -978,22 +987,7 @@ config TOUCHSCREEN_DMI the OS-image for the device. This option supplies the missing info. Enable this for x86 tablets with Silead or Chipone touchscreens. -config X86_ANDROID_TABLETS - tristate "X86 Android tablet support" - depends on I2C && SPI && SERIAL_DEV_BUS && ACPI && EFI && GPIOLIB - help - X86 tablets which ship with Android as (part of) the factory image - typically have various problems with their DSDTs. The factory kernels - shipped on these devices typically have device addresses and GPIOs - hardcoded in the kernel, rather than specified in their DSDT. - - With the DSDT containing a random collection of devices which may or - may not actually be present. This driver contains various fixes for - such tablets, including instantiating kernel devices for devices which - are missing from the DSDT. - - If you have a x86 Android tablet say Y or M here, for a generic x86 - distro config say M here. +source "drivers/platform/x86/x86-android-tablets/Kconfig" config FW_ATTR_CLASS tristate diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 1d3d1b02541b..2cafe51ec4d8 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_WMI_BMOF) += wmi-bmof.o obj-$(CONFIG_HUAWEI_WMI) += huawei-wmi.o obj-$(CONFIG_MXM_WMI) += mxm-wmi.o obj-$(CONFIG_NVIDIA_WMI_EC_BACKLIGHT) += nvidia-wmi-ec-backlight.o -obj-$(CONFIG_PEAQ_WMI) += peaq-wmi.o obj-$(CONFIG_XIAOMI_WMI) += xiaomi-wmi.o obj-$(CONFIG_GIGABYTE_WMI) += gigabyte-wmi.o obj-$(CONFIG_YOGABOOK_WMI) += lenovo-yogabook-wmi.o @@ -63,6 +62,7 @@ obj-$(CONFIG_UV_SYSFS) += uv_sysfs.o # IBM Thinkpad and Lenovo obj-$(CONFIG_IBM_RTL) += ibm_rtl.o obj-$(CONFIG_IDEAPAD_LAPTOP) += ideapad-laptop.o +obj-$(CONFIG_LENOVO_YMC) += lenovo-ymc.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o @@ -71,6 +71,7 @@ obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o obj-y += intel/ # MSI +obj-$(CONFIG_MSI_EC) += msi-ec.o obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_MSI_WMI) += msi-wmi.o @@ -112,7 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o -obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets.o +obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets/ # Intel uncore drivers obj-$(CONFIG_INTEL_IPS) += intel_ips.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index ee67efdd5499..377a0becd1a1 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -2258,7 +2258,7 @@ error_mailled: return err; } -static int acer_platform_remove(struct platform_device *device) +static void acer_platform_remove(struct platform_device *device) { if (has_cap(ACER_CAP_MAILLED)) acer_led_exit(); @@ -2266,7 +2266,6 @@ static int acer_platform_remove(struct platform_device *device) acer_backlight_exit(); acer_rfkill_exit(); - return 0; } #ifdef CONFIG_PM_SLEEP @@ -2334,7 +2333,7 @@ static struct platform_driver acer_platform_driver = { .pm = &acer_pm, }, .probe = acer_platform_probe, - .remove = acer_platform_remove, + .remove_new = acer_platform_remove, .shutdown = acer_platform_shutdown, }; diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index a48638ad2a8a..ec8cc780b822 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -341,7 +341,7 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal) pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n", fanoff, fanon, fanon); fanoff = fanon; - }; + } trips[0].temperature = fanon; trips[0].hysteresis = fanon - fanoff; diff --git a/drivers/platform/x86/adv_swbutton.c b/drivers/platform/x86/adv_swbutton.c index 38693b735c87..6b23ba78e028 100644 --- a/drivers/platform/x86/adv_swbutton.c +++ b/drivers/platform/x86/adv_swbutton.c @@ -90,14 +90,12 @@ static int adv_swbutton_probe(struct platform_device *device) return 0; } -static int adv_swbutton_remove(struct platform_device *device) +static void adv_swbutton_remove(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, adv_swbutton_notify); - - return 0; } static const struct acpi_device_id button_device_ids[] = { @@ -112,7 +110,7 @@ static struct platform_driver adv_swbutton_driver = { .acpi_match_table = button_device_ids, }, .probe = adv_swbutton_probe, - .remove = adv_swbutton_remove, + .remove_new = adv_swbutton_remove, }; module_platform_driver(adv_swbutton_driver); diff --git a/drivers/platform/x86/amd/Kconfig b/drivers/platform/x86/amd/Kconfig index 2ce8cb2170df..d9685aef0887 100644 --- a/drivers/platform/x86/amd/Kconfig +++ b/drivers/platform/x86/amd/Kconfig @@ -7,7 +7,7 @@ source "drivers/platform/x86/amd/pmf/Kconfig" config AMD_PMC tristate "AMD SoC PMC driver" - depends on ACPI && PCI && RTC_CLASS + depends on ACPI && PCI && RTC_CLASS && AMD_NB select SERIO help The driver provides support for AMD Power Management Controller diff --git a/drivers/platform/x86/amd/hsmp.c b/drivers/platform/x86/amd/hsmp.c index 521c6a229362..31382ef52efb 100644 --- a/drivers/platform/x86/amd/hsmp.c +++ b/drivers/platform/x86/amd/hsmp.c @@ -340,16 +340,14 @@ static int hsmp_pltdrv_probe(struct platform_device *pdev) return misc_register(&hsmp_device); } -static int hsmp_pltdrv_remove(struct platform_device *pdev) +static void hsmp_pltdrv_remove(struct platform_device *pdev) { misc_deregister(&hsmp_device); - - return 0; } static struct platform_driver amd_hsmp_driver = { .probe = hsmp_pltdrv_probe, - .remove = hsmp_pltdrv_remove, + .remove_new = hsmp_pltdrv_remove, .driver = { .name = DRIVER_NAME, }, diff --git a/drivers/platform/x86/amd/pmc.c b/drivers/platform/x86/amd/pmc.c index 2edaae04a691..5a935db80fab 100644 --- a/drivers/platform/x86/amd/pmc.c +++ b/drivers/platform/x86/amd/pmc.c @@ -10,6 +10,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <asm/amd_nb.h> #include <linux/acpi.h> #include <linux/bitfield.h> #include <linux/bits.h> @@ -37,8 +38,6 @@ #define AMD_PMC_SCRATCH_REG_YC 0xD14 /* STB Registers */ -#define AMD_PMC_STB_INDEX_ADDRESS 0xF8 -#define AMD_PMC_STB_INDEX_DATA 0xFC #define AMD_PMC_STB_PMI_0 0x03E30600 #define AMD_PMC_STB_S2IDLE_PREPARE 0xC6000001 #define AMD_PMC_STB_S2IDLE_RESTORE 0xC6000002 @@ -56,8 +55,6 @@ #define S2D_TELEMETRY_DRAMBYTES_MAX 0x1000000 /* Base address of SMU for mapping physical address to virtual address */ -#define AMD_PMC_SMU_INDEX_ADDRESS 0xB8 -#define AMD_PMC_SMU_INDEX_DATA 0xBC #define AMD_PMC_MAPPING_SIZE 0x01000 #define AMD_PMC_BASE_ADDR_OFFSET 0x10000 #define AMD_PMC_BASE_ADDR_LO 0x13B102E8 @@ -97,6 +94,7 @@ #define AMD_CPU_ID_YC 0x14B5 #define AMD_CPU_ID_CB 0x14D8 #define AMD_CPU_ID_PS 0x14E8 +#define AMD_CPU_ID_SP 0x14A4 #define PMC_MSG_DELAY_MIN_US 50 #define RESPONSE_REGISTER_LOOP_MAX 20000 @@ -268,6 +266,7 @@ static int amd_pmc_stb_debugfs_open_v2(struct inode *inode, struct file *filp) dev->msg_port = 0; if (ret) { dev_err(dev->dev, "error: S2D_NUM_SAMPLES not supported : %d\n", ret); + kfree(buf); return ret; } @@ -342,33 +341,6 @@ static int amd_pmc_setup_smu_logging(struct amd_pmc_dev *dev) return 0; } -static int amd_pmc_idlemask_read(struct amd_pmc_dev *pdev, struct device *dev, - struct seq_file *s) -{ - u32 val; - - switch (pdev->cpu_id) { - case AMD_CPU_ID_CZN: - val = amd_pmc_reg_read(pdev, AMD_PMC_SCRATCH_REG_CZN); - break; - case AMD_CPU_ID_YC: - case AMD_CPU_ID_CB: - case AMD_CPU_ID_PS: - val = amd_pmc_reg_read(pdev, AMD_PMC_SCRATCH_REG_YC); - break; - default: - return -EINVAL; - } - - if (dev) - dev_dbg(pdev->dev, "SMU idlemask s0i3: 0x%x\n", val); - - if (s) - seq_printf(s, "SMU idlemask : 0x%x\n", val); - - return 0; -} - static int get_metrics_table(struct amd_pmc_dev *pdev, struct smu_metrics *table) { if (!pdev->smu_virt_addr) { @@ -403,6 +375,9 @@ static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev) int rc; u32 val; + if (dev->cpu_id == AMD_CPU_ID_PCO) + return -ENODEV; + rc = amd_pmc_send_cmd(dev, 0, &val, SMU_MSG_GETSMUVERSION, 1); if (rc) return rc; @@ -449,12 +424,31 @@ static ssize_t smu_program_show(struct device *d, struct device_attribute *attr, static DEVICE_ATTR_RO(smu_fw_version); static DEVICE_ATTR_RO(smu_program); +static umode_t pmc_attr_is_visible(struct kobject *kobj, struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct amd_pmc_dev *pdev = dev_get_drvdata(dev); + + if (pdev->cpu_id == AMD_CPU_ID_PCO) + return 0; + return 0444; +} + static struct attribute *pmc_attrs[] = { &dev_attr_smu_fw_version.attr, &dev_attr_smu_program.attr, NULL, }; -ATTRIBUTE_GROUPS(pmc); + +static struct attribute_group pmc_attr_group = { + .attrs = pmc_attrs, + .is_visible = pmc_attr_is_visible, +}; + +static const struct attribute_group *pmc_groups[] = { + &pmc_attr_group, + NULL, +}; static int smu_fw_info_show(struct seq_file *s, void *unused) { @@ -521,28 +515,47 @@ static int s0ix_stats_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(s0ix_stats); -static int amd_pmc_idlemask_show(struct seq_file *s, void *unused) +static int amd_pmc_idlemask_read(struct amd_pmc_dev *pdev, struct device *dev, + struct seq_file *s) { - struct amd_pmc_dev *dev = s->private; + u32 val; int rc; - /* we haven't yet read SMU version */ - if (!dev->major) { - rc = amd_pmc_get_smu_version(dev); - if (rc) - return rc; + switch (pdev->cpu_id) { + case AMD_CPU_ID_CZN: + /* we haven't yet read SMU version */ + if (!pdev->major) { + rc = amd_pmc_get_smu_version(pdev); + if (rc) + return rc; + } + if (pdev->major > 56 || (pdev->major >= 55 && pdev->minor >= 37)) + val = amd_pmc_reg_read(pdev, AMD_PMC_SCRATCH_REG_CZN); + else + return -EINVAL; + break; + case AMD_CPU_ID_YC: + case AMD_CPU_ID_CB: + case AMD_CPU_ID_PS: + val = amd_pmc_reg_read(pdev, AMD_PMC_SCRATCH_REG_YC); + break; + default: + return -EINVAL; } - if (dev->major > 56 || (dev->major >= 55 && dev->minor >= 37)) { - rc = amd_pmc_idlemask_read(dev, NULL, s); - if (rc) - return rc; - } else { - seq_puts(s, "Unsupported SMU version for Idlemask\n"); - } + if (dev) + dev_dbg(pdev->dev, "SMU idlemask s0i3: 0x%x\n", val); + + if (s) + seq_printf(s, "SMU idlemask : 0x%x\n", val); return 0; } + +static int amd_pmc_idlemask_show(struct seq_file *s, void *unused) +{ + return amd_pmc_idlemask_read(s->private, NULL, s); +} DEFINE_SHOW_ATTRIBUTE(amd_pmc_idlemask); static void amd_pmc_dbgfs_unregister(struct amd_pmc_dev *dev) @@ -812,6 +825,14 @@ static void amd_pmc_s2idle_check(void) dev_err(pdev->dev, "error writing to STB: %d\n", rc); } +static int amd_pmc_dump_data(struct amd_pmc_dev *pdev) +{ + if (pdev->cpu_id == AMD_CPU_ID_PCO) + return -ENODEV; + + return amd_pmc_send_cmd(pdev, 0, NULL, SMU_MSG_LOG_DUMP_DATA, 0); +} + static void amd_pmc_s2idle_restore(void) { struct amd_pmc_dev *pdev = &pmc; @@ -824,7 +845,7 @@ static void amd_pmc_s2idle_restore(void) dev_err(pdev->dev, "resume failed: %d\n", rc); /* Let SMU know that we are looking for stats */ - amd_pmc_send_cmd(pdev, 0, NULL, SMU_MSG_LOG_DUMP_DATA, 0); + amd_pmc_dump_data(pdev); rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_S2IDLE_RESTORE); if (rc) @@ -840,7 +861,7 @@ static struct acpi_s2idle_dev_ops amd_pmc_s2idle_dev_ops = { .restore = amd_pmc_s2idle_restore, }; -static int __maybe_unused amd_pmc_suspend_handler(struct device *dev) +static int amd_pmc_suspend_handler(struct device *dev) { struct amd_pmc_dev *pdev = dev_get_drvdata(dev); @@ -866,6 +887,7 @@ static const struct pci_device_id pmc_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_RN) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_PCO) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_RV) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_SP) }, { } }; @@ -902,17 +924,9 @@ static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data) { int err; - err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0); + err = amd_smn_write(0, AMD_PMC_STB_PMI_0, data); if (err) { - dev_err(dev->dev, "failed to write addr in stb: 0x%X\n", - AMD_PMC_STB_INDEX_ADDRESS); - return pcibios_err_to_errno(err); - } - - err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, data); - if (err) { - dev_err(dev->dev, "failed to write data in stb: 0x%X\n", - AMD_PMC_STB_INDEX_DATA); + dev_err(dev->dev, "failed to write data in stb: 0x%X\n", AMD_PMC_STB_PMI_0); return pcibios_err_to_errno(err); } @@ -923,18 +937,10 @@ static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf) { int i, err; - err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0); - if (err) { - dev_err(dev->dev, "error writing addr to stb: 0x%X\n", - AMD_PMC_STB_INDEX_ADDRESS); - return pcibios_err_to_errno(err); - } - for (i = 0; i < FIFO_SIZE; i++) { - err = pci_read_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, buf++); + err = amd_smn_read(0, AMD_PMC_STB_PMI_0, buf++); if (err) { - dev_err(dev->dev, "error reading data from stb: 0x%X\n", - AMD_PMC_STB_INDEX_DATA); + dev_err(dev->dev, "error reading data from stb: 0x%X\n", AMD_PMC_STB_PMI_0); return pcibios_err_to_errno(err); } } @@ -960,31 +966,26 @@ static int amd_pmc_probe(struct platform_device *pdev) } dev->cpu_id = rdev->device; - dev->rdev = rdev; - err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_LO); - if (err) { - dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS); - err = pcibios_err_to_errno(err); + + if (dev->cpu_id == AMD_CPU_ID_SP) { + dev_warn_once(dev->dev, "S0i3 is not supported on this hardware\n"); + err = -ENODEV; goto err_pci_dev_put; } - err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val); + dev->rdev = rdev; + err = amd_smn_read(0, AMD_PMC_BASE_ADDR_LO, &val); if (err) { + dev_err(dev->dev, "error reading 0x%x\n", AMD_PMC_BASE_ADDR_LO); err = pcibios_err_to_errno(err); goto err_pci_dev_put; } base_addr_lo = val & AMD_PMC_BASE_ADDR_HI_MASK; - err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_HI); - if (err) { - dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS); - err = pcibios_err_to_errno(err); - goto err_pci_dev_put; - } - - err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val); + err = amd_smn_read(0, AMD_PMC_BASE_ADDR_HI, &val); if (err) { + dev_err(dev->dev, "error reading 0x%x\n", AMD_PMC_BASE_ADDR_HI); err = pcibios_err_to_errno(err); goto err_pci_dev_put; } @@ -1022,7 +1023,7 @@ err_pci_dev_put: return err; } -static int amd_pmc_remove(struct platform_device *pdev) +static void amd_pmc_remove(struct platform_device *pdev) { struct amd_pmc_dev *dev = platform_get_drvdata(pdev); @@ -1031,7 +1032,6 @@ static int amd_pmc_remove(struct platform_device *pdev) amd_pmc_dbgfs_unregister(dev); pci_dev_put(dev->rdev); mutex_destroy(&dev->lock); - return 0; } static const struct acpi_device_id amd_pmc_acpi_ids[] = { @@ -1054,7 +1054,7 @@ static struct platform_driver amd_pmc_driver = { .pm = pm_sleep_ptr(&amd_pmc_pm), }, .probe = amd_pmc_probe, - .remove = amd_pmc_remove, + .remove_new = amd_pmc_remove, }; module_platform_driver(amd_pmc_driver); diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig index 6d89528c3177..d87986adf91e 100644 --- a/drivers/platform/x86/amd/pmf/Kconfig +++ b/drivers/platform/x86/amd/pmf/Kconfig @@ -7,6 +7,7 @@ config AMD_PMF tristate "AMD Platform Management Framework" depends on ACPI && PCI depends on POWER_SUPPLY + depends on AMD_NB select ACPI_PLATFORM_PROFILE help This driver provides support for the AMD Platform Management Framework. diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index da23639071d7..d5bb775dadcf 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -8,6 +8,7 @@ * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> */ +#include <asm/amd_nb.h> #include <linux/debugfs.h> #include <linux/iopoll.h> #include <linux/module.h> @@ -22,8 +23,6 @@ #define AMD_PMF_REGISTER_ARGUMENT 0xA58 /* Base address of SMU for mapping physical address to virtual address */ -#define AMD_PMF_SMU_INDEX_ADDRESS 0xB8 -#define AMD_PMF_SMU_INDEX_DATA 0xBC #define AMD_PMF_MAPPING_SIZE 0x01000 #define AMD_PMF_BASE_ADDR_OFFSET 0x10000 #define AMD_PMF_BASE_ADDR_LO 0x13B102E8 @@ -348,30 +347,19 @@ static int amd_pmf_probe(struct platform_device *pdev) } dev->cpu_id = rdev->device; - err = pci_write_config_dword(rdev, AMD_PMF_SMU_INDEX_ADDRESS, AMD_PMF_BASE_ADDR_LO); - if (err) { - dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMF_SMU_INDEX_ADDRESS); - pci_dev_put(rdev); - return pcibios_err_to_errno(err); - } - err = pci_read_config_dword(rdev, AMD_PMF_SMU_INDEX_DATA, &val); + err = amd_smn_read(0, AMD_PMF_BASE_ADDR_LO, &val); if (err) { + dev_err(dev->dev, "error in reading from 0x%x\n", AMD_PMF_BASE_ADDR_LO); pci_dev_put(rdev); return pcibios_err_to_errno(err); } base_addr_lo = val & AMD_PMF_BASE_ADDR_HI_MASK; - err = pci_write_config_dword(rdev, AMD_PMF_SMU_INDEX_ADDRESS, AMD_PMF_BASE_ADDR_HI); - if (err) { - dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMF_SMU_INDEX_ADDRESS); - pci_dev_put(rdev); - return pcibios_err_to_errno(err); - } - - err = pci_read_config_dword(rdev, AMD_PMF_SMU_INDEX_DATA, &val); + err = amd_smn_read(0, AMD_PMF_BASE_ADDR_HI, &val); if (err) { + dev_err(dev->dev, "error in reading from 0x%x\n", AMD_PMF_BASE_ADDR_HI); pci_dev_put(rdev); return pcibios_err_to_errno(err); } @@ -402,7 +390,7 @@ static int amd_pmf_probe(struct platform_device *pdev) return 0; } -static int amd_pmf_remove(struct platform_device *pdev) +static void amd_pmf_remove(struct platform_device *pdev) { struct amd_pmf_dev *dev = platform_get_drvdata(pdev); @@ -413,7 +401,6 @@ static int amd_pmf_remove(struct platform_device *pdev) mutex_destroy(&dev->lock); mutex_destroy(&dev->update_mutex); kfree(dev->buf); - return 0; } static const struct attribute_group *amd_pmf_driver_groups[] = { @@ -428,7 +415,7 @@ static struct platform_driver amd_pmf_driver = { .dev_groups = amd_pmf_driver_groups, }, .probe = amd_pmf_probe, - .remove = amd_pmf_remove, + .remove_new = amd_pmf_remove, }; module_platform_driver(amd_pmf_driver); diff --git a/drivers/platform/x86/amilo-rfkill.c b/drivers/platform/x86/amilo-rfkill.c index 3e313c4d538d..efcf909786a5 100644 --- a/drivers/platform/x86/amilo-rfkill.c +++ b/drivers/platform/x86/amilo-rfkill.c @@ -124,11 +124,10 @@ fail: return rc; } -static int amilo_rfkill_remove(struct platform_device *device) +static void amilo_rfkill_remove(struct platform_device *device) { rfkill_unregister(amilo_rfkill_dev); rfkill_destroy(amilo_rfkill_dev); - return 0; } static struct platform_driver amilo_rfkill_driver = { @@ -136,7 +135,7 @@ static struct platform_driver amilo_rfkill_driver = { .name = KBUILD_MODNAME, }, .probe = amilo_rfkill_probe, - .remove = amilo_rfkill_remove, + .remove_new = amilo_rfkill_remove, }; static int __init amilo_rfkill_init(void) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 9333f82cfa8a..e02b4aea4f1e 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -5,6 +5,7 @@ * Copyright (C) Canonical Ltd. <seth.forshee@canonical.com> * Copyright (C) 2010-2012 Andreas Heider <andreas@meetr.de> * Copyright (C) 2015 Lukas Wunner <lukas@wunner.de> + * Copyright (C) 2023 Orlando Chamberlain <orlandoch.dev@gmail.com> */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -15,38 +16,51 @@ #include <linux/backlight.h> #include <linux/acpi.h> #include <linux/pnp.h> -#include <linux/apple_bl.h> #include <linux/apple-gmux.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/pci.h> #include <linux/vga_switcheroo.h> +#include <linux/debugfs.h> +#include <acpi/video.h> #include <asm/io.h> /** * DOC: Overview * * gmux is a microcontroller built into the MacBook Pro to support dual GPUs: - * A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on retinas. + * A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on pre-T2 retinas. + * + * On T2 Macbooks, the gmux is part of the T2 Coprocessor's SMC. The SMC has + * an I2C connection to a `NXP PCAL6524` GPIO expander, which enables/disables + * the voltage regulators of the discrete GPU, drives the display panel power, + * and has a GPIO to switch the eDP mux. The Intel CPU can interact with + * gmux through MMIO, similar to how the main SMC interface is controlled. * * (The MacPro6,1 2013 also has a gmux, however it is unclear why since it has * dual GPUs but no built-in display.) * * gmux is connected to the LPC bus of the southbridge. Its I/O ports are * accessed differently depending on the microcontroller: Driver functions - * to access a pre-retina gmux are infixed ``_pio_``, those for a retina gmux - * are infixed ``_index_``. + * to access a pre-retina gmux are infixed ``_pio_``, those for a pre-T2 + * retina gmux are infixed ``_index_``, and those on T2 Macs are infixed + * with ``_mmio_``. * * .. _Lattice XP2: * http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx * .. _Renesas R4F2113: * http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp + * .. _NXP PCAL6524: + * https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf */ +struct apple_gmux_config; + struct apple_gmux_data { + u8 __iomem *iomem_base; unsigned long iostart; unsigned long iolen; - bool indexed; + const struct apple_gmux_config *config; struct mutex index_lock; struct backlight_device *bdev; @@ -60,10 +74,26 @@ struct apple_gmux_data { enum vga_switcheroo_client_id switch_state_external; enum vga_switcheroo_state power_state; struct completion powerchange_done; + + /* debugfs data */ + u8 selected_port; + struct dentry *debug_dentry; }; static struct apple_gmux_data *apple_gmux_data; +struct apple_gmux_config { + u8 (*read8)(struct apple_gmux_data *gmux_data, int port); + void (*write8)(struct apple_gmux_data *gmux_data, int port, u8 val); + u32 (*read32)(struct apple_gmux_data *gmux_data, int port); + void (*write32)(struct apple_gmux_data *gmux_data, int port, u32 val); + const struct vga_switcheroo_handler *gmux_handler; + enum vga_switcheroo_handler_flags_t handler_flags; + unsigned long resource_type; + bool read_version_as_u32; + char *name; +}; + #define GMUX_INTERRUPT_ENABLE 0xff #define GMUX_INTERRUPT_DISABLE 0x00 @@ -193,37 +223,98 @@ static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, mutex_unlock(&gmux_data->index_lock); } +static int gmux_mmio_wait(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + + while (i && gwr) { + gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + udelay(100); + i--; + } + + return !!i; +} + +static u8 gmux_mmio_read8(struct apple_gmux_data *gmux_data, int port) +{ + u8 val; + + mutex_lock(&gmux_data->index_lock); + gmux_mmio_wait(gmux_data); + iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); + iowrite8(GMUX_MMIO_READ | sizeof(val), + gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + gmux_mmio_wait(gmux_data); + val = ioread8(gmux_data->iomem_base); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_mmio_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + mutex_lock(&gmux_data->index_lock); + gmux_mmio_wait(gmux_data); + iowrite8(val, gmux_data->iomem_base); + + iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); + iowrite8(GMUX_MMIO_WRITE | sizeof(val), + gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + + gmux_mmio_wait(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u32 gmux_mmio_read32(struct apple_gmux_data *gmux_data, int port) +{ + u32 val; + + mutex_lock(&gmux_data->index_lock); + gmux_mmio_wait(gmux_data); + iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); + iowrite8(GMUX_MMIO_READ | sizeof(val), + gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + gmux_mmio_wait(gmux_data); + val = be32_to_cpu(ioread32(gmux_data->iomem_base)); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_mmio_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + mutex_lock(&gmux_data->index_lock); + iowrite32(cpu_to_be32(val), gmux_data->iomem_base); + iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); + iowrite8(GMUX_MMIO_WRITE | sizeof(val), + gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); + gmux_mmio_wait(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) { - if (gmux_data->indexed) - return gmux_index_read8(gmux_data, port); - else - return gmux_pio_read8(gmux_data, port); + return gmux_data->config->read8(gmux_data, port); } static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) { - if (gmux_data->indexed) - gmux_index_write8(gmux_data, port, val); - else - gmux_pio_write8(gmux_data, port, val); + return gmux_data->config->write8(gmux_data, port, val); } static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) { - if (gmux_data->indexed) - return gmux_index_read32(gmux_data, port); - else - return gmux_pio_read32(gmux_data, port); + return gmux_data->config->read32(gmux_data, port); } static void gmux_write32(struct apple_gmux_data *gmux_data, int port, u32 val) { - if (gmux_data->indexed) - gmux_index_write32(gmux_data, port, val); - else - gmux_pio_write32(gmux_data, port, val); + return gmux_data->config->write32(gmux_data, port, val); } /** @@ -233,8 +324,8 @@ static void gmux_write32(struct apple_gmux_data *gmux_data, int port, * the GPU. On dual GPU MacBook Pros by contrast, either GPU may be suspended * to conserve energy. Hence the PWM signal needs to be generated by a separate * backlight driver which is controlled by gmux. The earliest generation - * MBP5 2008/09 uses a `TI LP8543`_ backlight driver. All newer models - * use a `TI LP8545`_. + * MBP5 2008/09 uses a `TI LP8543`_ backlight driver. Newer models + * use a `TI LP8545`_ or a TI LP8548. * * .. _TI LP8543: https://www.ti.com/lit/ds/symlink/lp8543.pdf * .. _TI LP8545: https://www.ti.com/lit/ds/symlink/lp8545.pdf @@ -298,8 +389,8 @@ static const struct backlight_ops gmux_bl_ops = { * connecting it either to the discrete GPU or the Thunderbolt controller. * Oddly enough, while the full port is no longer switchable, AUX and HPD * are still switchable by way of an `NXP CBTL03062`_ (on pre-retinas - * MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on retinas) under the - * control of gmux. Since the integrated GPU is missing the main link, + * MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on pre-t2 retinas) under + * the control of gmux. Since the integrated GPU is missing the main link, * external displays appear to it as phantoms which fail to link-train. * * gmux receives the HPD signal of all display connectors and sends an @@ -346,10 +437,10 @@ static void gmux_read_switch_state(struct apple_gmux_data *gmux_data) else gmux_data->switch_state_ddc = VGA_SWITCHEROO_DIS; - if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2) - gmux_data->switch_state_display = VGA_SWITCHEROO_IGD; - else + if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) & 1) gmux_data->switch_state_display = VGA_SWITCHEROO_DIS; + else + gmux_data->switch_state_display = VGA_SWITCHEROO_IGD; if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL) == 2) gmux_data->switch_state_external = VGA_SWITCHEROO_IGD; @@ -463,27 +554,79 @@ static enum vga_switcheroo_client_id gmux_get_client_id(struct pci_dev *pdev) return VGA_SWITCHEROO_DIS; } -static const struct vga_switcheroo_handler gmux_handler_indexed = { +static const struct vga_switcheroo_handler gmux_handler_no_ddc = { .switchto = gmux_switchto, .power_state = gmux_set_power_state, .get_client_id = gmux_get_client_id, }; -static const struct vga_switcheroo_handler gmux_handler_classic = { +static const struct vga_switcheroo_handler gmux_handler_ddc = { .switchto = gmux_switchto, .switch_ddc = gmux_switch_ddc, .power_state = gmux_set_power_state, .get_client_id = gmux_get_client_id, }; +static const struct apple_gmux_config apple_gmux_pio = { + .read8 = &gmux_pio_read8, + .write8 = &gmux_pio_write8, + .read32 = &gmux_pio_read32, + .write32 = &gmux_pio_write32, + .gmux_handler = &gmux_handler_ddc, + .handler_flags = VGA_SWITCHEROO_CAN_SWITCH_DDC, + .resource_type = IORESOURCE_IO, + .read_version_as_u32 = false, + .name = "classic" +}; + +static const struct apple_gmux_config apple_gmux_index = { + .read8 = &gmux_index_read8, + .write8 = &gmux_index_write8, + .read32 = &gmux_index_read32, + .write32 = &gmux_index_write32, + .gmux_handler = &gmux_handler_no_ddc, + .handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG, + .resource_type = IORESOURCE_IO, + .read_version_as_u32 = true, + .name = "indexed" +}; + +static const struct apple_gmux_config apple_gmux_mmio = { + .read8 = &gmux_mmio_read8, + .write8 = &gmux_mmio_write8, + .read32 = &gmux_mmio_read32, + .write32 = &gmux_mmio_write32, + .gmux_handler = &gmux_handler_no_ddc, + .handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG, + .resource_type = IORESOURCE_MEM, + .read_version_as_u32 = true, + .name = "T2" +}; + + /** * DOC: Interrupt * * gmux is also connected to a GPIO pin of the southbridge and thereby is able - * to trigger an ACPI GPE. On the MBP5 2008/09 it's GPIO pin 22 of the Nvidia - * MCP79, on all following generations it's GPIO pin 6 of the Intel PCH. + * to trigger an ACPI GPE. ACPI name GMGP holds this GPIO pin's number. On the + * MBP5 2008/09 it's GPIO pin 22 of the Nvidia MCP79, on following generations + * it's GPIO pin 6 of the Intel PCH, on MMIO gmux's it's pin 21. + * * The GPE merely signals that an interrupt occurred, the actual type of event * is identified by reading a gmux register. + * + * In addition to the GMGP name, gmux's ACPI device also has two methods GMSP + * and GMLV. GMLV likely means "GMUX Level", and reads the value of the GPIO, + * while GMSP likely means "GMUX Set Polarity", and seems to write to the GPIO's + * value. On newer Macbooks (This was introduced with or sometime before the + * MacBookPro14,3), the ACPI GPE method differentiates between the OS type: On + * Darwin, only a notification is signaled, whereas on other OSes, the GPIO's + * value is read and then inverted. + * + * Because Linux masquerades as Darwin, it ends up in the notification-only code + * path. On MMIO gmux's, this seems to lead to us being unable to clear interrupts, + * unless we call GMSP(0). Without this, there is a flood of status=0 interrupts + * that can't be cleared. This issue seems to be unique to MMIO gmux's. */ static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) @@ -510,6 +653,9 @@ static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) /* to clear interrupts write back current status */ status = gmux_interrupt_get_status(gmux_data); gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); + /* Prevent flood of status=0 interrupts */ + if (gmux_data->config == &apple_gmux_mmio) + acpi_execute_simple_method(gmux_data->dhandle, "GMSP", 0); } static void gmux_notify_handler(acpi_handle device, u32 value, void *context) @@ -529,6 +675,80 @@ static void gmux_notify_handler(acpi_handle device, u32 value, void *context) complete(&gmux_data->powerchange_done); } +/** + * DOC: Debugfs Interface + * + * gmux ports can be accessed from userspace as a debugfs interface. For example: + * + * # echo 4 > /sys/kernel/debug/apple_gmux/selected_port + * # cat /sys/kernel/debug/apple_gmux/selected_port_data | xxd -p + * 00000005 + * + * Reads 4 bytes from port 4 (GMUX_PORT_VERSION_MAJOR). + * + * 1 and 4 byte writes are also allowed. + */ + +static ssize_t gmux_selected_port_data_write(struct file *file, + const char __user *userbuf, size_t count, loff_t *ppos) +{ + struct apple_gmux_data *gmux_data = file->private_data; + + if (*ppos) + return -EINVAL; + + if (count == 1) { + u8 data; + + if (copy_from_user(&data, userbuf, 1)) + return -EFAULT; + + gmux_write8(gmux_data, gmux_data->selected_port, data); + } else if (count == 4) { + u32 data; + + if (copy_from_user(&data, userbuf, 4)) + return -EFAULT; + + gmux_write32(gmux_data, gmux_data->selected_port, data); + } else + return -EINVAL; + + return count; +} + +static ssize_t gmux_selected_port_data_read(struct file *file, + char __user *userbuf, size_t count, loff_t *ppos) +{ + struct apple_gmux_data *gmux_data = file->private_data; + u32 data; + + data = gmux_read32(gmux_data, gmux_data->selected_port); + + return simple_read_from_buffer(userbuf, count, ppos, &data, sizeof(data)); +} + +static const struct file_operations gmux_port_data_ops = { + .open = simple_open, + .write = gmux_selected_port_data_write, + .read = gmux_selected_port_data_read +}; + +static void gmux_init_debugfs(struct apple_gmux_data *gmux_data) +{ + gmux_data->debug_dentry = debugfs_create_dir(KBUILD_MODNAME, NULL); + + debugfs_create_u8("selected_port", 0644, gmux_data->debug_dentry, + &gmux_data->selected_port); + debugfs_create_file("selected_port_data", 0644, gmux_data->debug_dentry, + gmux_data, &gmux_port_data_ops); +} + +static void gmux_fini_debugfs(struct apple_gmux_data *gmux_data) +{ + debugfs_remove_recursive(gmux_data->debug_dentry); +} + static int gmux_suspend(struct device *dev) { struct pnp_dev *pnp = to_pnp_dev(dev); @@ -560,18 +780,19 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) struct apple_gmux_data *gmux_data; struct resource *res; struct backlight_properties props; - struct backlight_device *bdev; + struct backlight_device *bdev = NULL; u8 ver_major, ver_minor, ver_release; + bool register_bdev = true; int ret = -ENXIO; acpi_status status; unsigned long long gpe; - bool indexed = false; + enum apple_gmux_type type; u32 version; if (apple_gmux_data) return -EBUSY; - if (!apple_gmux_detect(pnp, &indexed)) { + if (!apple_gmux_detect(pnp, &type)) { pr_info("gmux device not present\n"); return -ENODEV; } @@ -581,6 +802,35 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) return -ENOMEM; pnp_set_drvdata(pnp, gmux_data); + switch (type) { + case APPLE_GMUX_TYPE_MMIO: + gmux_data->config = &apple_gmux_mmio; + mutex_init(&gmux_data->index_lock); + + res = pnp_get_resource(pnp, IORESOURCE_MEM, 0); + gmux_data->iostart = res->start; + /* Although the ACPI table only allocates 8 bytes, we need 16. */ + gmux_data->iolen = 16; + if (!request_mem_region(gmux_data->iostart, gmux_data->iolen, + "Apple gmux")) { + pr_err("gmux I/O already in use\n"); + goto err_free; + } + gmux_data->iomem_base = ioremap(gmux_data->iostart, gmux_data->iolen); + if (!gmux_data->iomem_base) { + pr_err("couldn't remap gmux mmio region"); + goto err_release; + } + goto get_version; + case APPLE_GMUX_TYPE_INDEXED: + gmux_data->config = &apple_gmux_index; + mutex_init(&gmux_data->index_lock); + break; + case APPLE_GMUX_TYPE_PIO: + gmux_data->config = &apple_gmux_pio; + break; + } + res = pnp_get_resource(pnp, IORESOURCE_IO, 0); gmux_data->iostart = res->start; gmux_data->iolen = resource_size(res); @@ -591,9 +841,8 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) goto err_free; } - if (indexed) { - mutex_init(&gmux_data->index_lock); - gmux_data->indexed = true; +get_version: + if (gmux_data->config->read_version_as_u32) { version = gmux_read32(gmux_data, GMUX_PORT_VERSION_MAJOR); ver_major = (version >> 24) & 0xff; ver_minor = (version >> 16) & 0xff; @@ -604,39 +853,36 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); } pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor, - ver_release, (gmux_data->indexed ? "indexed" : "classic")); + ver_release, gmux_data->config->name); memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); - /* - * Currently it's assumed that the maximum brightness is less than - * 2^24 for compatibility with old gmux versions. Cap the max - * brightness at this value, but print a warning if the hardware - * reports something higher so that it can be fixed. - */ - if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS)) - props.max_brightness = GMUX_MAX_BRIGHTNESS; - - bdev = backlight_device_register("gmux_backlight", &pnp->dev, - gmux_data, &gmux_bl_ops, &props); - if (IS_ERR(bdev)) { - ret = PTR_ERR(bdev); - goto err_release; - } - - gmux_data->bdev = bdev; - bdev->props.brightness = gmux_get_brightness(bdev); - backlight_update_status(bdev); +#if IS_REACHABLE(CONFIG_ACPI_VIDEO) + register_bdev = acpi_video_get_backlight_type() == acpi_backlight_apple_gmux; +#endif + if (register_bdev) { + /* + * Currently it's assumed that the maximum brightness is less than + * 2^24 for compatibility with old gmux versions. Cap the max + * brightness at this value, but print a warning if the hardware + * reports something higher so that it can be fixed. + */ + if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS)) + props.max_brightness = GMUX_MAX_BRIGHTNESS; + + bdev = backlight_device_register("gmux_backlight", &pnp->dev, + gmux_data, &gmux_bl_ops, &props); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + goto err_unmap; + } - /* - * The backlight situation on Macs is complicated. If the gmux is - * present it's the best choice, because it always works for - * backlight control and supports more levels than other options. - * Disable the other backlight choices. - */ - apple_bl_unregister(); + gmux_data->bdev = bdev; + bdev->props.brightness = gmux_get_brightness(bdev); + backlight_update_status(bdev); + } gmux_data->power_state = VGA_SWITCHEROO_ON; @@ -690,21 +936,18 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) /* * Retina MacBook Pros cannot switch the panel's AUX separately * and need eDP pre-calibration. They are distinguishable from - * pre-retinas by having an "indexed" gmux. + * pre-retinas by having an "indexed" or "T2" gmux. * * Pre-retina MacBook Pros can switch the panel's DDC separately. */ - if (gmux_data->indexed) - ret = vga_switcheroo_register_handler(&gmux_handler_indexed, - VGA_SWITCHEROO_NEEDS_EDP_CONFIG); - else - ret = vga_switcheroo_register_handler(&gmux_handler_classic, - VGA_SWITCHEROO_CAN_SWITCH_DDC); + ret = vga_switcheroo_register_handler(gmux_data->config->gmux_handler, + gmux_data->config->handler_flags); if (ret) { pr_err("Failed to register vga_switcheroo handler\n"); goto err_register_handler; } + gmux_init_debugfs(gmux_data); return 0; err_register_handler: @@ -719,8 +962,14 @@ err_enable_gpe: &gmux_notify_handler); err_notify: backlight_device_unregister(bdev); +err_unmap: + if (gmux_data->iomem_base) + iounmap(gmux_data->iomem_base); err_release: - release_region(gmux_data->iostart, gmux_data->iolen); + if (gmux_data->config->resource_type == IORESOURCE_MEM) + release_mem_region(gmux_data->iostart, gmux_data->iolen); + else + release_region(gmux_data->iostart, gmux_data->iolen); err_free: kfree(gmux_data); return ret; @@ -730,6 +979,7 @@ static void gmux_remove(struct pnp_dev *pnp) { struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_fini_debugfs(gmux_data); vga_switcheroo_unregister_handler(); gmux_disable_interrupts(gmux_data); if (gmux_data->gpe >= 0) { @@ -741,11 +991,13 @@ static void gmux_remove(struct pnp_dev *pnp) backlight_device_unregister(gmux_data->bdev); - release_region(gmux_data->iostart, gmux_data->iolen); + if (gmux_data->iomem_base) { + iounmap(gmux_data->iomem_base); + release_mem_region(gmux_data->iostart, gmux_data->iolen); + } else + release_region(gmux_data->iostart, gmux_data->iolen); apple_gmux_data = NULL; kfree(gmux_data); - - apple_bl_register(); } static const struct pnp_device_id gmux_device_ids[] = { diff --git a/drivers/platform/x86/barco-p50-gpio.c b/drivers/platform/x86/barco-p50-gpio.c index 8dd672339485..af566f712057 100644 --- a/drivers/platform/x86/barco-p50-gpio.c +++ b/drivers/platform/x86/barco-p50-gpio.c @@ -370,7 +370,7 @@ err_leds: return ret; } -static int p50_gpio_remove(struct platform_device *pdev) +static void p50_gpio_remove(struct platform_device *pdev) { struct p50_gpio *p50 = platform_get_drvdata(pdev); @@ -378,8 +378,6 @@ static int p50_gpio_remove(struct platform_device *pdev) platform_device_unregister(p50->leds_pdev); gpiod_remove_lookup_table(&p50_gpio_led_table); - - return 0; } static struct platform_driver p50_gpio_driver = { @@ -387,7 +385,7 @@ static struct platform_driver p50_gpio_driver = { .name = DRIVER_NAME, }, .probe = p50_gpio_probe, - .remove = p50_gpio_remove, + .remove_new = p50_gpio_remove, }; /* Board setup */ diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index 8b6a14611859..2edaea2492df 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -1134,7 +1134,7 @@ static void cmpc_exit(void) module_init(cmpc_init); module_exit(cmpc_exit); -static const struct acpi_device_id cmpc_device_ids[] = { +static const struct acpi_device_id cmpc_device_ids[] __maybe_unused = { {CMPC_ACCEL_HID, 0}, {CMPC_ACCEL_HID_V4, 0}, {CMPC_TABLET_HID, 0}, diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index e10d2f64dfad..61c745490d71 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -1003,12 +1003,12 @@ remove: return err; } -static int compal_remove(struct platform_device *pdev) +static void compal_remove(struct platform_device *pdev) { struct compal_data *data; if (!extra_features) - return 0; + return; pr_info("Unloading: resetting fan control to motherboard\n"); pwm_disable_control(); @@ -1017,8 +1017,6 @@ static int compal_remove(struct platform_device *pdev) power_supply_unregister(data->psy); sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group); - - return 0; } static struct platform_driver compal_driver = { @@ -1026,7 +1024,7 @@ static struct platform_driver compal_driver = { .name = DRIVER_NAME, }, .probe = compal_probe, - .remove = compal_remove, + .remove_new = compal_remove, }; static int __init compal_init(void) diff --git a/drivers/platform/x86/dell/dcdbas.c b/drivers/platform/x86/dell/dcdbas.c index 0ecb7b164750..76787369d7fa 100644 --- a/drivers/platform/x86/dell/dcdbas.c +++ b/drivers/platform/x86/dell/dcdbas.c @@ -698,12 +698,10 @@ static int dcdbas_probe(struct platform_device *dev) return 0; } -static int dcdbas_remove(struct platform_device *dev) +static void dcdbas_remove(struct platform_device *dev) { unregister_reboot_notifier(&dcdbas_reboot_nb); sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group); - - return 0; } static struct platform_driver dcdbas_driver = { @@ -711,7 +709,7 @@ static struct platform_driver dcdbas_driver = { .name = DRIVER_NAME, }, .probe = dcdbas_probe, - .remove = dcdbas_remove, + .remove_new = dcdbas_remove, }; static const struct platform_device_info dcdbas_dev_info __initconst = { diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c index e92c3ad06d69..6586438356de 100644 --- a/drivers/platform/x86/dell/dell-laptop.c +++ b/drivers/platform/x86/dell/dell-laptop.c @@ -97,6 +97,7 @@ static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; static bool force_rfkill; static bool micmute_led_registered; +static bool mute_led_registered; module_param(force_rfkill, bool, 0444); MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models"); @@ -2177,6 +2178,34 @@ static struct led_classdev micmute_led_cdev = { .default_trigger = "audio-micmute", }; +static int mute_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct calling_interface_buffer buffer; + struct calling_interface_token *token; + int state = brightness != LED_OFF; + + if (state == 0) + token = dell_smbios_find_token(GLOBAL_MUTE_DISABLE); + else + token = dell_smbios_find_token(GLOBAL_MUTE_ENABLE); + + if (!token) + return -ENODEV; + + dell_fill_request(&buffer, token->location, token->value, 0, 0); + dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD); + + return 0; +} + +static struct led_classdev mute_led_cdev = { + .name = "platform::mute", + .max_brightness = 1, + .brightness_set_blocking = mute_led_set, + .default_trigger = "audio-mute", +}; + static int __init dell_init(void) { struct calling_interface_token *token; @@ -2230,6 +2259,15 @@ static int __init dell_init(void) micmute_led_registered = true; } + if (dell_smbios_find_token(GLOBAL_MUTE_DISABLE) && + dell_smbios_find_token(GLOBAL_MUTE_ENABLE)) { + mute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MUTE); + ret = led_classdev_register(&platform_device->dev, &mute_led_cdev); + if (ret < 0) + goto fail_backlight; + mute_led_registered = true; + } + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) return 0; @@ -2277,6 +2315,8 @@ fail_get_brightness: fail_backlight: if (micmute_led_registered) led_classdev_unregister(&micmute_led_cdev); + if (mute_led_registered) + led_classdev_unregister(&mute_led_cdev); fail_led: dell_cleanup_rfkill(); fail_rfkill: @@ -2299,6 +2339,8 @@ static void __exit dell_exit(void) backlight_device_unregister(dell_backlight_device); if (micmute_led_registered) led_classdev_unregister(&micmute_led_cdev); + if (mute_led_registered) + led_classdev_unregister(&mute_led_cdev); dell_cleanup_rfkill(); if (platform_device) { platform_device_unregister(platform_device); diff --git a/drivers/platform/x86/dell/dell-smbios.h b/drivers/platform/x86/dell/dell-smbios.h index 75fa8ea0476d..eb341bf000c6 100644 --- a/drivers/platform/x86/dell/dell-smbios.h +++ b/drivers/platform/x86/dell/dell-smbios.h @@ -34,6 +34,8 @@ #define KBD_LED_AUTO_100_TOKEN 0x02F6 #define GLOBAL_MIC_MUTE_ENABLE 0x0364 #define GLOBAL_MIC_MUTE_DISABLE 0x0365 +#define GLOBAL_MUTE_ENABLE 0x058C +#define GLOBAL_MUTE_DISABLE 0x058D struct notifier_block; diff --git a/drivers/platform/x86/dell/dell-smo8800.c b/drivers/platform/x86/dell/dell-smo8800.c index 8d6b7a83cf24..f7ec17c56833 100644 --- a/drivers/platform/x86/dell/dell-smo8800.c +++ b/drivers/platform/x86/dell/dell-smo8800.c @@ -154,14 +154,13 @@ error: return err; } -static int smo8800_remove(struct platform_device *device) +static void smo8800_remove(struct platform_device *device) { struct smo8800_device *smo8800 = platform_get_drvdata(device); free_irq(smo8800->irq, smo8800); misc_deregister(&smo8800->miscdev); dev_dbg(&device->dev, "device /dev/freefall unregistered\n"); - return 0; } /* NOTE: Keep this list in sync with drivers/i2c/busses/i2c-i801.c */ @@ -180,7 +179,7 @@ MODULE_DEVICE_TABLE(acpi, smo8800_ids); static struct platform_driver smo8800_driver = { .probe = smo8800_probe, - .remove = smo8800_remove, + .remove_new = smo8800_remove, .driver = { .name = DRIVER_NAME, .acpi_match_table = smo8800_ids, diff --git a/drivers/platform/x86/hp/hp_accel.c b/drivers/platform/x86/hp/hp_accel.c index 6477591747cf..52535576772a 100644 --- a/drivers/platform/x86/hp/hp_accel.c +++ b/drivers/platform/x86/hp/hp_accel.c @@ -342,7 +342,7 @@ static int lis3lv02d_probe(struct platform_device *device) return ret; } -static int lis3lv02d_remove(struct platform_device *device) +static void lis3lv02d_remove(struct platform_device *device) { i8042_remove_filter(hp_accel_i8042_filter); lis3lv02d_joystick_disable(&lis3_dev); @@ -352,7 +352,6 @@ static int lis3lv02d_remove(struct platform_device *device) flush_work(&hpled_led.work); lis3lv02d_remove_fs(&lis3_dev); - return 0; } static int __maybe_unused lis3lv02d_suspend(struct device *dev) @@ -373,7 +372,7 @@ static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume); /* For the HP MDPS aka 3D Driveguard */ static struct platform_driver lis3lv02d_driver = { .probe = lis3lv02d_probe, - .remove = lis3lv02d_remove, + .remove_new = lis3lv02d_remove, .driver = { .name = "hp_accel", .pm = &hp_accel_pm, diff --git a/drivers/platform/x86/hp/tc1100-wmi.c b/drivers/platform/x86/hp/tc1100-wmi.c index ded26213c420..5298b0f6804f 100644 --- a/drivers/platform/x86/hp/tc1100-wmi.c +++ b/drivers/platform/x86/hp/tc1100-wmi.c @@ -170,11 +170,9 @@ static int __init tc1100_probe(struct platform_device *device) } -static int tc1100_remove(struct platform_device *device) +static void tc1100_remove(struct platform_device *device) { sysfs_remove_group(&device->dev.kobj, &tc1100_attribute_group); - - return 0; } #ifdef CONFIG_PM @@ -223,7 +221,7 @@ static struct platform_driver tc1100_driver = { .pm = &tc1100_pm_ops, #endif }, - .remove = tc1100_remove, + .remove_new = tc1100_remove, }; static int __init tc1100_init(void) diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c index 2df1b2d5e3ea..70e5c4c0574d 100644 --- a/drivers/platform/x86/huawei-wmi.c +++ b/drivers/platform/x86/huawei-wmi.c @@ -830,7 +830,7 @@ static int huawei_wmi_probe(struct platform_device *pdev) return 0; } -static int huawei_wmi_remove(struct platform_device *pdev) +static void huawei_wmi_remove(struct platform_device *pdev) { const struct wmi_device_id *guid = huawei_wmi_events_id_table; @@ -846,8 +846,6 @@ static int huawei_wmi_remove(struct platform_device *pdev) huawei_wmi_battery_exit(&pdev->dev); huawei_wmi_fn_lock_exit(&pdev->dev); } - - return 0; } static struct platform_driver huawei_wmi_driver = { @@ -855,7 +853,7 @@ static struct platform_driver huawei_wmi_driver = { .name = "huawei-wmi", }, .probe = huawei_wmi_probe, - .remove = huawei_wmi_remove, + .remove_new = huawei_wmi_remove, }; static __init int huawei_wmi_init(void) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 959ec3c5f376..d2fee9a3e239 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> -#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/leds.h> #include <linux/module.h> @@ -31,6 +30,7 @@ #include <linux/sysfs.h> #include <linux/types.h> #include <linux/wmi.h> +#include "ideapad-laptop.h" #include <acpi/video.h> @@ -85,33 +85,6 @@ enum { SALS_FNLOCK_OFF = 0xf, }; -enum { - VPCCMD_R_VPC1 = 0x10, - VPCCMD_R_BL_MAX, - VPCCMD_R_BL, - VPCCMD_W_BL, - VPCCMD_R_WIFI, - VPCCMD_W_WIFI, - VPCCMD_R_BT, - VPCCMD_W_BT, - VPCCMD_R_BL_POWER, - VPCCMD_R_NOVO, - VPCCMD_R_VPC2, - VPCCMD_R_TOUCHPAD, - VPCCMD_W_TOUCHPAD, - VPCCMD_R_CAMERA, - VPCCMD_W_CAMERA, - VPCCMD_R_3G, - VPCCMD_W_3G, - VPCCMD_R_ODD, /* 0x21 */ - VPCCMD_W_FAN, - VPCCMD_R_RF, - VPCCMD_W_RF, - VPCCMD_R_FAN = 0x2B, - VPCCMD_R_SPECIAL_BUTTONS = 0x31, - VPCCMD_W_BL_POWER = 0x33, -}; - struct ideapad_dytc_priv { enum platform_profile_option current_profile; struct platform_profile_handler pprof; @@ -227,7 +200,6 @@ static void ideapad_shared_exit(struct ideapad_private *priv) /* * ACPI Helpers */ -#define IDEAPAD_EC_TIMEOUT 200 /* in ms */ static int eval_int(acpi_handle handle, const char *name, unsigned long *res) { @@ -270,116 +242,11 @@ static int exec_sals(acpi_handle handle, unsigned long arg) return exec_simple_method(handle, "SALS", arg); } -static int eval_int_with_arg(acpi_handle handle, const char *name, unsigned long arg, unsigned long *res) -{ - struct acpi_object_list params; - unsigned long long result; - union acpi_object in_obj; - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = arg; - - status = acpi_evaluate_integer(handle, (char *)name, ¶ms, &result); - if (ACPI_FAILURE(status)) - return -EIO; - - if (res) - *res = result; - - return 0; -} - static int eval_dytc(acpi_handle handle, unsigned long cmd, unsigned long *res) { return eval_int_with_arg(handle, "DYTC", cmd, res); } -static int eval_vpcr(acpi_handle handle, unsigned long cmd, unsigned long *res) -{ - return eval_int_with_arg(handle, "VPCR", cmd, res); -} - -static int eval_vpcw(acpi_handle handle, unsigned long cmd, unsigned long data) -{ - struct acpi_object_list params; - union acpi_object in_obj[2]; - acpi_status status; - - params.count = 2; - params.pointer = in_obj; - in_obj[0].type = ACPI_TYPE_INTEGER; - in_obj[0].integer.value = cmd; - in_obj[1].type = ACPI_TYPE_INTEGER; - in_obj[1].integer.value = data; - - status = acpi_evaluate_object(handle, "VPCW", ¶ms, NULL); - if (ACPI_FAILURE(status)) - return -EIO; - - return 0; -} - -static int read_ec_data(acpi_handle handle, unsigned long cmd, unsigned long *data) -{ - unsigned long end_jiffies, val; - int err; - - err = eval_vpcw(handle, 1, cmd); - if (err) - return err; - - end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; - - while (time_before(jiffies, end_jiffies)) { - schedule(); - - err = eval_vpcr(handle, 1, &val); - if (err) - return err; - - if (val == 0) - return eval_vpcr(handle, 0, data); - } - - acpi_handle_err(handle, "timeout in %s\n", __func__); - - return -ETIMEDOUT; -} - -static int write_ec_cmd(acpi_handle handle, unsigned long cmd, unsigned long data) -{ - unsigned long end_jiffies, val; - int err; - - err = eval_vpcw(handle, 0, data); - if (err) - return err; - - err = eval_vpcw(handle, 1, cmd); - if (err) - return err; - - end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; - - while (time_before(jiffies, end_jiffies)) { - schedule(); - - err = eval_vpcr(handle, 1, &val); - if (err) - return err; - - if (val == 0) - return 0; - } - - acpi_handle_err(handle, "timeout in %s\n", __func__); - - return -ETIMEDOUT; -} - /* * debugfs */ @@ -1918,7 +1785,7 @@ input_failed: return err; } -static int ideapad_acpi_remove(struct platform_device *pdev) +static void ideapad_acpi_remove(struct platform_device *pdev) { struct ideapad_private *priv = dev_get_drvdata(&pdev->dev); int i; @@ -1939,8 +1806,6 @@ static int ideapad_acpi_remove(struct platform_device *pdev) ideapad_input_exit(priv); ideapad_debugfs_exit(priv); ideapad_sysfs_exit(priv); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -1967,7 +1832,7 @@ MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); static struct platform_driver ideapad_acpi_driver = { .probe = ideapad_acpi_add, - .remove = ideapad_acpi_remove, + .remove_new = ideapad_acpi_remove, .driver = { .name = "ideapad_acpi", .pm = &ideapad_pm, diff --git a/drivers/platform/x86/ideapad-laptop.h b/drivers/platform/x86/ideapad-laptop.h new file mode 100644 index 000000000000..4498a96de597 --- /dev/null +++ b/drivers/platform/x86/ideapad-laptop.h @@ -0,0 +1,152 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ideapad-laptop.h - Lenovo IdeaPad ACPI Extras + * + * Copyright © 2010 Intel Corporation + * Copyright © 2010 David Woodhouse <dwmw2@infradead.org> + */ + +#ifndef _IDEAPAD_LAPTOP_H_ +#define _IDEAPAD_LAPTOP_H_ + +#include <linux/acpi.h> +#include <linux/jiffies.h> +#include <linux/errno.h> + +enum { + VPCCMD_R_VPC1 = 0x10, + VPCCMD_R_BL_MAX, + VPCCMD_R_BL, + VPCCMD_W_BL, + VPCCMD_R_WIFI, + VPCCMD_W_WIFI, + VPCCMD_R_BT, + VPCCMD_W_BT, + VPCCMD_R_BL_POWER, + VPCCMD_R_NOVO, + VPCCMD_R_VPC2, + VPCCMD_R_TOUCHPAD, + VPCCMD_W_TOUCHPAD, + VPCCMD_R_CAMERA, + VPCCMD_W_CAMERA, + VPCCMD_R_3G, + VPCCMD_W_3G, + VPCCMD_R_ODD, /* 0x21 */ + VPCCMD_W_FAN, + VPCCMD_R_RF, + VPCCMD_W_RF, + VPCCMD_W_YMC = 0x2A, + VPCCMD_R_FAN = 0x2B, + VPCCMD_R_SPECIAL_BUTTONS = 0x31, + VPCCMD_W_BL_POWER = 0x33, +}; + +static inline int eval_int_with_arg(acpi_handle handle, const char *name, unsigned long arg, unsigned long *res) +{ + struct acpi_object_list params; + unsigned long long result; + union acpi_object in_obj; + acpi_status status; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = arg; + + status = acpi_evaluate_integer(handle, (char *)name, ¶ms, &result); + if (ACPI_FAILURE(status)) + return -EIO; + + if (res) + *res = result; + + return 0; +} + +static inline int eval_vpcr(acpi_handle handle, unsigned long cmd, unsigned long *res) +{ + return eval_int_with_arg(handle, "VPCR", cmd, res); +} + +static inline int eval_vpcw(acpi_handle handle, unsigned long cmd, unsigned long data) +{ + struct acpi_object_list params; + union acpi_object in_obj[2]; + acpi_status status; + + params.count = 2; + params.pointer = in_obj; + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = cmd; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = data; + + status = acpi_evaluate_object(handle, "VPCW", ¶ms, NULL); + if (ACPI_FAILURE(status)) + return -EIO; + + return 0; +} + +#define IDEAPAD_EC_TIMEOUT 200 /* in ms */ + +static inline int read_ec_data(acpi_handle handle, unsigned long cmd, unsigned long *data) +{ + unsigned long end_jiffies, val; + int err; + + err = eval_vpcw(handle, 1, cmd); + if (err) + return err; + + end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; + + while (time_before(jiffies, end_jiffies)) { + schedule(); + + err = eval_vpcr(handle, 1, &val); + if (err) + return err; + + if (val == 0) + return eval_vpcr(handle, 0, data); + } + + acpi_handle_err(handle, "timeout in %s\n", __func__); + + return -ETIMEDOUT; +} + +static inline int write_ec_cmd(acpi_handle handle, unsigned long cmd, unsigned long data) +{ + unsigned long end_jiffies, val; + int err; + + err = eval_vpcw(handle, 0, data); + if (err) + return err; + + err = eval_vpcw(handle, 1, cmd); + if (err) + return err; + + end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; + + while (time_before(jiffies, end_jiffies)) { + schedule(); + + err = eval_vpcr(handle, 1, &val); + if (err) + return err; + + if (val == 0) + return 0; + } + + acpi_handle_err(handle, "timeout in %s\n", __func__); + + return -ETIMEDOUT; +} + +#undef IDEAPAD_EC_TIMEOUT +#endif /* !_IDEAPAD_LAPTOP_H_ */ diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig index bbbd9e54e9ee..e9dc0c021029 100644 --- a/drivers/platform/x86/intel/Kconfig +++ b/drivers/platform/x86/intel/Kconfig @@ -80,6 +80,16 @@ config INTEL_BXTWC_PMIC_TMU This driver enables the alarm wakeup functionality in the TMU unit of Whiskey Cove PMIC. +config INTEL_BYTCRC_PWRSRC + tristate "Intel Bay Trail Crystal Cove power source driver" + depends on INTEL_SOC_PMIC + help + This option adds a power source driver for Crystal Cove PMICs + on Intel Bay Trail devices. + + To compile this driver as a module, choose M here: the module + will be called intel_bytcrc_pwrsrc. + config INTEL_CHTDC_TI_PWRBTN tristate "Intel Cherry Trail Dollar Cove TI power button driver" depends on INTEL_SOC_PMIC_CHTDC_TI diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile index 411df4040427..c1d5fe05e3f3 100644 --- a/drivers/platform/x86/intel/Makefile +++ b/drivers/platform/x86/intel/Makefile @@ -38,6 +38,8 @@ intel_bxtwc_tmu-y := bxtwc_tmu.o obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o intel_crystal_cove_charger-y := crystal_cove_charger.o obj-$(CONFIG_X86_ANDROID_TABLETS) += intel_crystal_cove_charger.o +intel_bytcrc_pwrsrc-y := bytcrc_pwrsrc.o +obj-$(CONFIG_INTEL_BYTCRC_PWRSRC) += intel_bytcrc_pwrsrc.o intel_chtdc_ti_pwrbtn-y := chtdc_ti_pwrbtn.o obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o intel_chtwc_int33fe-y := chtwc_int33fe.o diff --git a/drivers/platform/x86/intel/bxtwc_tmu.c b/drivers/platform/x86/intel/bxtwc_tmu.c index 7ccf583649e6..d0e2a3c293b0 100644 --- a/drivers/platform/x86/intel/bxtwc_tmu.c +++ b/drivers/platform/x86/intel/bxtwc_tmu.c @@ -89,7 +89,7 @@ static int bxt_wcove_tmu_probe(struct platform_device *pdev) return 0; } -static int bxt_wcove_tmu_remove(struct platform_device *pdev) +static void bxt_wcove_tmu_remove(struct platform_device *pdev) { struct wcove_tmu *wctmu = platform_get_drvdata(pdev); unsigned int val; @@ -101,7 +101,6 @@ static int bxt_wcove_tmu_remove(struct platform_device *pdev) regmap_read(wctmu->regmap, BXTWC_MTMUIRQ_REG, &val); regmap_write(wctmu->regmap, BXTWC_MTMUIRQ_REG, val | BXTWC_TMU_ALRM_MASK); - return 0; } #ifdef CONFIG_PM_SLEEP @@ -132,7 +131,7 @@ MODULE_DEVICE_TABLE(platform, bxt_wcove_tmu_id_table); static struct platform_driver bxt_wcove_tmu_driver = { .probe = bxt_wcove_tmu_probe, - .remove = bxt_wcove_tmu_remove, + .remove_new = bxt_wcove_tmu_remove, .driver = { .name = "bxt_wcove_tmu", .pm = &bxtwc_tmu_pm_ops, diff --git a/drivers/platform/x86/intel/bytcrc_pwrsrc.c b/drivers/platform/x86/intel/bytcrc_pwrsrc.c new file mode 100644 index 000000000000..8a022b90d12d --- /dev/null +++ b/drivers/platform/x86/intel/bytcrc_pwrsrc.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Power-source driver for Bay Trail Crystal Cove PMIC + * + * Copyright (c) 2023 Hans de Goede <hdegoede@redhat.com> + * + * Based on intel_crystalcove_pwrsrc.c from Android kernel sources, which is: + * Copyright (C) 2013 Intel Corporation + */ + +#include <linux/debugfs.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define CRYSTALCOVE_SPWRSRC_REG 0x1E +#define CRYSTALCOVE_RESETSRC0_REG 0x20 +#define CRYSTALCOVE_RESETSRC1_REG 0x21 +#define CRYSTALCOVE_WAKESRC_REG 0x22 + +struct crc_pwrsrc_data { + struct regmap *regmap; + struct dentry *debug_dentry; + unsigned int resetsrc0; + unsigned int resetsrc1; + unsigned int wakesrc; +}; + +static const char * const pwrsrc_pwrsrc_info[] = { + /* bit 0 */ "USB", + /* bit 1 */ "DC in", + /* bit 2 */ "Battery", + NULL, +}; + +static const char * const pwrsrc_resetsrc0_info[] = { + /* bit 0 */ "SOC reporting a thermal event", + /* bit 1 */ "critical PMIC temperature", + /* bit 2 */ "critical system temperature", + /* bit 3 */ "critical battery temperature", + /* bit 4 */ "VSYS under voltage", + /* bit 5 */ "VSYS over voltage", + /* bit 6 */ "battery removal", + NULL, +}; + +static const char * const pwrsrc_resetsrc1_info[] = { + /* bit 0 */ "VCRIT threshold", + /* bit 1 */ "BATID reporting battery removal", + /* bit 2 */ "user pressing the power button", + NULL, +}; + +static const char * const pwrsrc_wakesrc_info[] = { + /* bit 0 */ "user pressing the power button", + /* bit 1 */ "a battery insertion", + /* bit 2 */ "a USB charger insertion", + /* bit 3 */ "an adapter insertion", + NULL, +}; + +static void crc_pwrsrc_log(struct seq_file *seq, const char *prefix, + const char * const *info, unsigned int reg_val) +{ + int i; + + for (i = 0; info[i]; i++) { + if (reg_val & BIT(i)) + seq_printf(seq, "%s by %s\n", prefix, info[i]); + } +} + +static int pwrsrc_show(struct seq_file *seq, void *unused) +{ + struct crc_pwrsrc_data *data = seq->private; + unsigned int reg_val; + int ret; + + ret = regmap_read(data->regmap, CRYSTALCOVE_SPWRSRC_REG, ®_val); + if (ret) + return ret; + + crc_pwrsrc_log(seq, "System powered", pwrsrc_pwrsrc_info, reg_val); + return 0; +} + +static int resetsrc_show(struct seq_file *seq, void *unused) +{ + struct crc_pwrsrc_data *data = seq->private; + + crc_pwrsrc_log(seq, "Last shutdown caused", pwrsrc_resetsrc0_info, data->resetsrc0); + crc_pwrsrc_log(seq, "Last shutdown caused", pwrsrc_resetsrc1_info, data->resetsrc1); + return 0; +} + +static int wakesrc_show(struct seq_file *seq, void *unused) +{ + struct crc_pwrsrc_data *data = seq->private; + + crc_pwrsrc_log(seq, "Last wake caused", pwrsrc_wakesrc_info, data->wakesrc); + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(pwrsrc); +DEFINE_SHOW_ATTRIBUTE(resetsrc); +DEFINE_SHOW_ATTRIBUTE(wakesrc); + +static int crc_pwrsrc_read_and_clear(struct crc_pwrsrc_data *data, + unsigned int reg, unsigned int *val) +{ + int ret; + + ret = regmap_read(data->regmap, reg, val); + if (ret) + return ret; + + return regmap_write(data->regmap, reg, *val); +} + +static int crc_pwrsrc_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct crc_pwrsrc_data *data; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->regmap = pmic->regmap; + + /* + * Read + clear resetsrc0/1 and wakesrc now, so that they get + * cleared even if the debugfs interface is never used. + * + * Properly clearing the wakesrc is important, leaving bit 0 of it + * set turns reboot into poweroff on some tablets. + */ + ret = crc_pwrsrc_read_and_clear(data, CRYSTALCOVE_RESETSRC0_REG, &data->resetsrc0); + if (ret) + return ret; + + ret = crc_pwrsrc_read_and_clear(data, CRYSTALCOVE_RESETSRC1_REG, &data->resetsrc1); + if (ret) + return ret; + + ret = crc_pwrsrc_read_and_clear(data, CRYSTALCOVE_WAKESRC_REG, &data->wakesrc); + if (ret) + return ret; + + data->debug_dentry = debugfs_create_dir(KBUILD_MODNAME, NULL); + debugfs_create_file("pwrsrc", 0444, data->debug_dentry, data, &pwrsrc_fops); + debugfs_create_file("resetsrc", 0444, data->debug_dentry, data, &resetsrc_fops); + debugfs_create_file("wakesrc", 0444, data->debug_dentry, data, &wakesrc_fops); + + platform_set_drvdata(pdev, data); + return 0; +} + +static int crc_pwrsrc_remove(struct platform_device *pdev) +{ + struct crc_pwrsrc_data *data = platform_get_drvdata(pdev); + + debugfs_remove_recursive(data->debug_dentry); + return 0; +} + +static struct platform_driver crc_pwrsrc_driver = { + .probe = crc_pwrsrc_probe, + .remove = crc_pwrsrc_remove, + .driver = { + .name = "crystal_cove_pwrsrc", + }, +}; +module_platform_driver(crc_pwrsrc_driver); + +MODULE_ALIAS("platform:crystal_cove_pwrsrc"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("Power-source driver for Bay Trail Crystal Cove PMIC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c index 9606a994af22..615f8d1a0c68 100644 --- a/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c +++ b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c @@ -67,11 +67,10 @@ static int chtdc_ti_pwrbtn_probe(struct platform_device *pdev) return 0; } -static int chtdc_ti_pwrbtn_remove(struct platform_device *pdev) +static void chtdc_ti_pwrbtn_remove(struct platform_device *pdev) { dev_pm_clear_wake_irq(&pdev->dev); device_init_wakeup(&pdev->dev, false); - return 0; } static const struct platform_device_id chtdc_ti_pwrbtn_id_table[] = { @@ -85,7 +84,7 @@ static struct platform_driver chtdc_ti_pwrbtn_driver = { .name = KBUILD_MODNAME, }, .probe = chtdc_ti_pwrbtn_probe, - .remove = chtdc_ti_pwrbtn_remove, + .remove_new = chtdc_ti_pwrbtn_remove, .id_table = chtdc_ti_pwrbtn_id_table, }; module_platform_driver(chtdc_ti_pwrbtn_driver); diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c index 2c9a7d52be07..848baecc1bb0 100644 --- a/drivers/platform/x86/intel/chtwc_int33fe.c +++ b/drivers/platform/x86/intel/chtwc_int33fe.c @@ -405,7 +405,7 @@ out_remove_nodes: return ret; } -static int cht_int33fe_typec_remove(struct platform_device *pdev) +static void cht_int33fe_typec_remove(struct platform_device *pdev) { struct cht_int33fe_data *data = platform_get_drvdata(pdev); @@ -414,8 +414,6 @@ static int cht_int33fe_typec_remove(struct platform_device *pdev) i2c_unregister_device(data->battery_fg); cht_int33fe_remove_nodes(data); - - return 0; } static const struct acpi_device_id cht_int33fe_acpi_ids[] = { @@ -429,7 +427,7 @@ static struct platform_driver cht_int33fe_typec_driver = { .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids), }, .probe = cht_int33fe_typec_probe, - .remove = cht_int33fe_typec_remove, + .remove_new = cht_int33fe_typec_remove, }; module_platform_driver(cht_int33fe_typec_driver); diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index b6c06b37862e..5632bd3c534a 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -720,7 +720,7 @@ err_remove_notify: return err; } -static int intel_hid_remove(struct platform_device *device) +static void intel_hid_remove(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); @@ -728,12 +728,6 @@ static int intel_hid_remove(struct platform_device *device) acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler); intel_hid_set_enable(&device->dev, false); intel_button_array_enable(&device->dev, false); - - /* - * Even if we failed to shut off the event stream, we can still - * safely detach from the device. - */ - return 0; } static struct platform_driver intel_hid_pl_driver = { @@ -743,7 +737,7 @@ static struct platform_driver intel_hid_pl_driver = { .pm = &intel_hid_pl_pm_ops, }, .probe = intel_hid_probe, - .remove = intel_hid_remove, + .remove_new = intel_hid_remove, }; /* diff --git a/drivers/platform/x86/intel/ifs/core.c b/drivers/platform/x86/intel/ifs/core.c index 206a617c2e02..306f886b52d2 100644 --- a/drivers/platform/x86/intel/ifs/core.c +++ b/drivers/platform/x86/intel/ifs/core.c @@ -16,27 +16,63 @@ static const struct x86_cpu_id ifs_cpu_ids[] __initconst = { X86_MATCH(SAPPHIRERAPIDS_X), + X86_MATCH(EMERALDRAPIDS_X), {} }; MODULE_DEVICE_TABLE(x86cpu, ifs_cpu_ids); -static struct ifs_device ifs_device = { - .data = { - .integrity_cap_bit = MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT, - .test_num = 0, +ATTRIBUTE_GROUPS(plat_ifs); +ATTRIBUTE_GROUPS(plat_ifs_array); + +bool *ifs_pkg_auth; + +static const struct ifs_test_caps scan_test = { + .integrity_cap_bit = MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT, + .test_num = IFS_TYPE_SAF, +}; + +static const struct ifs_test_caps array_test = { + .integrity_cap_bit = MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT, + .test_num = IFS_TYPE_ARRAY_BIST, +}; + +static struct ifs_device ifs_devices[] = { + [IFS_TYPE_SAF] = { + .test_caps = &scan_test, + .misc = { + .name = "intel_ifs_0", + .minor = MISC_DYNAMIC_MINOR, + .groups = plat_ifs_groups, + }, }, - .misc = { - .name = "intel_ifs_0", - .nodename = "intel_ifs/0", - .minor = MISC_DYNAMIC_MINOR, + [IFS_TYPE_ARRAY_BIST] = { + .test_caps = &array_test, + .misc = { + .name = "intel_ifs_1", + .minor = MISC_DYNAMIC_MINOR, + .groups = plat_ifs_array_groups, + }, }, }; +#define IFS_NUMTESTS ARRAY_SIZE(ifs_devices) + +static void ifs_cleanup(void) +{ + int i; + + for (i = 0; i < IFS_NUMTESTS; i++) { + if (ifs_devices[i].misc.this_device) + misc_deregister(&ifs_devices[i].misc); + } + kfree(ifs_pkg_auth); +} + static int __init ifs_init(void) { const struct x86_cpu_id *m; u64 msrval; - int ret; + int i, ret; m = x86_match_cpu(ifs_cpu_ids); if (!m) @@ -51,28 +87,27 @@ static int __init ifs_init(void) if (rdmsrl_safe(MSR_INTEGRITY_CAPS, &msrval)) return -ENODEV; - ifs_device.misc.groups = ifs_get_groups(); - - if (!(msrval & BIT(ifs_device.data.integrity_cap_bit))) - return -ENODEV; - - ifs_device.data.pkg_auth = kmalloc_array(topology_max_packages(), sizeof(bool), GFP_KERNEL); - if (!ifs_device.data.pkg_auth) + ifs_pkg_auth = kmalloc_array(topology_max_packages(), sizeof(bool), GFP_KERNEL); + if (!ifs_pkg_auth) return -ENOMEM; - ret = misc_register(&ifs_device.misc); - if (ret) { - kfree(ifs_device.data.pkg_auth); - return ret; + for (i = 0; i < IFS_NUMTESTS; i++) { + if (!(msrval & BIT(ifs_devices[i].test_caps->integrity_cap_bit))) + continue; + ret = misc_register(&ifs_devices[i].misc); + if (ret) + goto err_exit; } - return 0; + +err_exit: + ifs_cleanup(); + return ret; } static void __exit ifs_exit(void) { - misc_deregister(&ifs_device.misc); - kfree(ifs_device.data.pkg_auth); + ifs_cleanup(); } module_init(ifs_init); diff --git a/drivers/platform/x86/intel/ifs/ifs.h b/drivers/platform/x86/intel/ifs/ifs.h index 046e39304fd5..93191855890f 100644 --- a/drivers/platform/x86/intel/ifs/ifs.h +++ b/drivers/platform/x86/intel/ifs/ifs.h @@ -17,7 +17,7 @@ * In Field Scan (IFS) is a hardware feature to run circuit level tests on * a CPU core to detect problems that are not caught by parity or ECC checks. * Future CPUs will support more than one type of test which will show up - * with a new platform-device instance-id, for now only .0 is exposed. + * with a new platform-device instance-id. * * * IFS Image @@ -25,7 +25,10 @@ * * Intel provides a firmware file containing the scan tests via * github [#f1]_. Similar to microcode there is a separate file for each - * family-model-stepping. + * family-model-stepping. IFS Images are not applicable for some test types. + * Wherever applicable the sysfs directory would provide a "current_batch" file + * (see below) for loading the image. + * * * IFS Image Loading * ----------------- @@ -35,7 +38,7 @@ * SHA hashes for the test. Then the tests themselves. Status MSRs provide * feedback on the success/failure of these steps. * - * The test files are kept in a fixed location: /lib/firmware/intel/ifs_0/ + * The test files are kept in a fixed location: /lib/firmware/intel/ifs_<n>/ * For e.g if there are 3 test files, they would be named in the following * fashion: * ff-mm-ss-01.scan @@ -47,7 +50,7 @@ * (e.g 1, 2 or 3 in the above scenario) into the curent_batch file. * To load ff-mm-ss-02.scan, the following command can be used:: * - * # echo 2 > /sys/devices/virtual/misc/intel_ifs_0/current_batch + * # echo 2 > /sys/devices/virtual/misc/intel_ifs_<n>/current_batch * * The above file can also be read to know the currently loaded image. * @@ -69,16 +72,16 @@ * to migrate those applications to other cores before running a core test. * It may also be necessary to redirect interrupts to other CPUs. * - * In all cases reading the SCAN_STATUS MSR provides details on what + * In all cases reading the corresponding test's STATUS MSR provides details on what * happened. The driver makes the value of this MSR visible to applications * via the "details" file (see below). Interrupted tests may be restarted. * - * The IFS driver provides sysfs interfaces via /sys/devices/virtual/misc/intel_ifs_0/ + * The IFS driver provides sysfs interfaces via /sys/devices/virtual/misc/intel_ifs_<n>/ * to control execution: * * Test a specific core:: * - * # echo <cpu#> > /sys/devices/virtual/misc/intel_ifs_0/run_test + * # echo <cpu#> > /sys/devices/virtual/misc/intel_ifs_<n>/run_test * * when HT is enabled any of the sibling cpu# can be specified to test * its corresponding physical core. Since the tests are per physical core, @@ -87,21 +90,21 @@ * * For e.g. to test core corresponding to cpu5 * - * # echo 5 > /sys/devices/virtual/misc/intel_ifs_0/run_test + * # echo 5 > /sys/devices/virtual/misc/intel_ifs_<n>/run_test * * Results of the last test is provided in /sys:: * - * $ cat /sys/devices/virtual/misc/intel_ifs_0/status + * $ cat /sys/devices/virtual/misc/intel_ifs_<n>/status * pass * * Status can be one of pass, fail, untested * * Additional details of the last test is provided by the details file:: * - * $ cat /sys/devices/virtual/misc/intel_ifs_0/details + * $ cat /sys/devices/virtual/misc/intel_ifs_<n>/details * 0x8081 * - * The details file reports the hex value of the SCAN_STATUS MSR. + * The details file reports the hex value of the test specific status MSR. * Hardware defined error codes are documented in volume 4 of the Intel * Software Developer's Manual but the error_code field may contain one of * the following driver defined software codes: @@ -127,6 +130,7 @@ #include <linux/device.h> #include <linux/miscdevice.h> +#define MSR_ARRAY_BIST 0x00000105 #define MSR_COPY_SCAN_HASHES 0x000002c2 #define MSR_SCAN_HASHES_STATUS 0x000002c3 #define MSR_AUTHENTICATE_AND_COPY_CHUNK 0x000002c4 @@ -137,6 +141,9 @@ #define SCAN_TEST_PASS 1 #define SCAN_TEST_FAIL 2 +#define IFS_TYPE_SAF 0 +#define IFS_TYPE_ARRAY_BIST 1 + /* MSR_SCAN_HASHES_STATUS bit fields */ union ifs_scan_hashes_status { u64 data; @@ -189,6 +196,17 @@ union ifs_status { }; }; +/* MSR_ARRAY_BIST bit fields */ +union ifs_array { + u64 data; + struct { + u32 array_bitmask; + u16 array_bank; + u16 rsvd :15; + u16 ctrl_result :1; + }; +}; + /* * Driver populated error-codes * 0xFD: Test timed out before completing all the chunks. @@ -197,22 +215,22 @@ union ifs_status { #define IFS_SW_TIMEOUT 0xFD #define IFS_SW_PARTIAL_COMPLETION 0xFE +struct ifs_test_caps { + int integrity_cap_bit; + int test_num; +}; + /** * struct ifs_data - attributes related to intel IFS driver - * @integrity_cap_bit: MSR_INTEGRITY_CAPS bit enumerating this test * @loaded_version: stores the currently loaded ifs image version. - * @pkg_auth: array of bool storing per package auth status * @loaded: If a valid test binary has been loaded into the memory * @loading_error: Error occurred on another CPU while loading image * @valid_chunks: number of chunks which could be validated. * @status: it holds simple status pass/fail/untested * @scan_details: opaque scan status code from h/w * @cur_batch: number indicating the currently loaded test file - * @test_num: number indicating the test type */ struct ifs_data { - int integrity_cap_bit; - bool *pkg_auth; int loaded_version; bool loaded; bool loading_error; @@ -220,7 +238,6 @@ struct ifs_data { int status; u64 scan_details; u32 cur_batch; - int test_num; }; struct ifs_work { @@ -229,7 +246,8 @@ struct ifs_work { }; struct ifs_device { - struct ifs_data data; + const struct ifs_test_caps *test_caps; + struct ifs_data rw_data; struct miscdevice misc; }; @@ -238,11 +256,21 @@ static inline struct ifs_data *ifs_get_data(struct device *dev) struct miscdevice *m = dev_get_drvdata(dev); struct ifs_device *d = container_of(m, struct ifs_device, misc); - return &d->data; + return &d->rw_data; +} + +static inline const struct ifs_test_caps *ifs_get_test_caps(struct device *dev) +{ + struct miscdevice *m = dev_get_drvdata(dev); + struct ifs_device *d = container_of(m, struct ifs_device, misc); + + return d->test_caps; } +extern bool *ifs_pkg_auth; int ifs_load_firmware(struct device *dev); int do_core_test(int cpu, struct device *dev); -const struct attribute_group **ifs_get_groups(void); +extern struct attribute *plat_ifs_attrs[]; +extern struct attribute *plat_ifs_array_attrs[]; #endif diff --git a/drivers/platform/x86/intel/ifs/load.c b/drivers/platform/x86/intel/ifs/load.c index c5c24e6fdc43..61dffb4c8a1d 100644 --- a/drivers/platform/x86/intel/ifs/load.c +++ b/drivers/platform/x86/intel/ifs/load.c @@ -192,7 +192,7 @@ static int scan_chunks_sanity_check(struct device *dev) struct ifs_work local_work; int curr_pkg, cpu, ret; - memset(ifsd->pkg_auth, 0, (topology_max_packages() * sizeof(bool))); + memset(ifs_pkg_auth, 0, (topology_max_packages() * sizeof(bool))); ret = validate_ifs_metadata(dev); if (ret) return ret; @@ -204,7 +204,7 @@ static int scan_chunks_sanity_check(struct device *dev) cpus_read_lock(); for_each_online_cpu(cpu) { curr_pkg = topology_physical_package_id(cpu); - if (ifsd->pkg_auth[curr_pkg]) + if (ifs_pkg_auth[curr_pkg]) continue; reinit_completion(&ifs_done); local_work.dev = dev; @@ -215,7 +215,7 @@ static int scan_chunks_sanity_check(struct device *dev) ret = -EIO; goto out; } - ifsd->pkg_auth[curr_pkg] = 1; + ifs_pkg_auth[curr_pkg] = 1; } ret = 0; out: @@ -257,13 +257,14 @@ static int image_sanity_check(struct device *dev, const struct microcode_header_ */ int ifs_load_firmware(struct device *dev) { + const struct ifs_test_caps *test = ifs_get_test_caps(dev); struct ifs_data *ifsd = ifs_get_data(dev); const struct firmware *fw; char scan_path[64]; int ret = -EINVAL; snprintf(scan_path, sizeof(scan_path), "intel/ifs_%d/%02x-%02x-%02x-%02x.scan", - ifsd->test_num, boot_cpu_data.x86, boot_cpu_data.x86_model, + test->test_num, boot_cpu_data.x86, boot_cpu_data.x86_model, boot_cpu_data.x86_stepping, ifsd->cur_batch); ret = request_firmware_direct(&fw, scan_path, dev); diff --git a/drivers/platform/x86/intel/ifs/runtest.c b/drivers/platform/x86/intel/ifs/runtest.c index 0bfd8fcdd7e8..1061eb7ec399 100644 --- a/drivers/platform/x86/intel/ifs/runtest.c +++ b/drivers/platform/x86/intel/ifs/runtest.c @@ -229,6 +229,85 @@ static void ifs_test_core(int cpu, struct device *dev) } } +#define SPINUNIT 100 /* 100 nsec */ +static atomic_t array_cpus_out; + +/* + * Simplified cpu sibling rendezvous loop based on microcode loader __wait_for_cpus() + */ +static void wait_for_sibling_cpu(atomic_t *t, long long timeout) +{ + int cpu = smp_processor_id(); + const struct cpumask *smt_mask = cpu_smt_mask(cpu); + int all_cpus = cpumask_weight(smt_mask); + + atomic_inc(t); + while (atomic_read(t) < all_cpus) { + if (timeout < SPINUNIT) + return; + ndelay(SPINUNIT); + timeout -= SPINUNIT; + touch_nmi_watchdog(); + } +} + +static int do_array_test(void *data) +{ + union ifs_array *command = data; + int cpu = smp_processor_id(); + int first; + + /* + * Only one logical CPU on a core needs to trigger the Array test via MSR write. + */ + first = cpumask_first(cpu_smt_mask(cpu)); + + if (cpu == first) { + wrmsrl(MSR_ARRAY_BIST, command->data); + /* Pass back the result of the test */ + rdmsrl(MSR_ARRAY_BIST, command->data); + } + + /* Tests complete faster if the sibling is spinning here */ + wait_for_sibling_cpu(&array_cpus_out, NSEC_PER_SEC); + + return 0; +} + +static void ifs_array_test_core(int cpu, struct device *dev) +{ + union ifs_array command = {}; + bool timed_out = false; + struct ifs_data *ifsd; + unsigned long timeout; + + ifsd = ifs_get_data(dev); + + command.array_bitmask = ~0U; + timeout = jiffies + HZ / 2; + + do { + if (time_after(jiffies, timeout)) { + timed_out = true; + break; + } + atomic_set(&array_cpus_out, 0); + stop_core_cpuslocked(cpu, do_array_test, &command); + + if (command.ctrl_result) + break; + } while (command.array_bitmask); + + ifsd->scan_details = command.data; + + if (command.ctrl_result) + ifsd->status = SCAN_TEST_FAIL; + else if (timed_out || command.array_bitmask) + ifsd->status = SCAN_NOT_TESTED; + else + ifsd->status = SCAN_TEST_PASS; +} + /* * Initiate per core test. It wakes up work queue threads on the target cpu and * its sibling cpu. Once all sibling threads wake up, the scan test gets executed and @@ -236,6 +315,8 @@ static void ifs_test_core(int cpu, struct device *dev) */ int do_core_test(int cpu, struct device *dev) { + const struct ifs_test_caps *test = ifs_get_test_caps(dev); + struct ifs_data *ifsd = ifs_get_data(dev); int ret = 0; /* Prevent CPUs from being taken offline during the scan test */ @@ -247,7 +328,18 @@ int do_core_test(int cpu, struct device *dev) goto out; } - ifs_test_core(cpu, dev); + switch (test->test_num) { + case IFS_TYPE_SAF: + if (!ifsd->loaded) + return -EPERM; + ifs_test_core(cpu, dev); + break; + case IFS_TYPE_ARRAY_BIST: + ifs_array_test_core(cpu, dev); + break; + default: + return -EINVAL; + } out: cpus_read_unlock(); return ret; diff --git a/drivers/platform/x86/intel/ifs/sysfs.c b/drivers/platform/x86/intel/ifs/sysfs.c index ee636a76b083..d856d6b8fc03 100644 --- a/drivers/platform/x86/intel/ifs/sysfs.c +++ b/drivers/platform/x86/intel/ifs/sysfs.c @@ -64,7 +64,6 @@ static ssize_t run_test_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ifs_data *ifsd = ifs_get_data(dev); unsigned int cpu; int rc; @@ -75,10 +74,7 @@ static ssize_t run_test_store(struct device *dev, if (down_interruptible(&ifs_sem)) return -EINTR; - if (!ifsd->loaded) - rc = -EPERM; - else - rc = do_core_test(cpu, dev); + rc = do_core_test(cpu, dev); up(&ifs_sem); @@ -141,7 +137,7 @@ static ssize_t image_version_show(struct device *dev, static DEVICE_ATTR_RO(image_version); /* global scan sysfs attributes */ -static struct attribute *plat_ifs_attrs[] = { +struct attribute *plat_ifs_attrs[] = { &dev_attr_details.attr, &dev_attr_status.attr, &dev_attr_run_test.attr, @@ -150,9 +146,10 @@ static struct attribute *plat_ifs_attrs[] = { NULL }; -ATTRIBUTE_GROUPS(plat_ifs); - -const struct attribute_group **ifs_get_groups(void) -{ - return plat_ifs_groups; -} +/* global array sysfs attributes */ +struct attribute *plat_ifs_array_attrs[] = { + &dev_attr_details.attr, + &dev_attr_status.attr, + &dev_attr_run_test.attr, + NULL +}; diff --git a/drivers/platform/x86/intel/int0002_vgpio.c b/drivers/platform/x86/intel/int0002_vgpio.c index 97cfbc520a02..b6708bab7c53 100644 --- a/drivers/platform/x86/intel/int0002_vgpio.c +++ b/drivers/platform/x86/intel/int0002_vgpio.c @@ -223,11 +223,10 @@ static int int0002_probe(struct platform_device *pdev) return 0; } -static int int0002_remove(struct platform_device *pdev) +static void int0002_remove(struct platform_device *pdev) { device_init_wakeup(&pdev->dev, false); acpi_unregister_wakeup_handler(int0002_check_wake, NULL); - return 0; } static int int0002_suspend(struct device *dev) @@ -273,7 +272,7 @@ static struct platform_driver int0002_driver = { .pm = &int0002_pm_ops, }, .probe = int0002_probe, - .remove = int0002_remove, + .remove_new = int0002_remove, }; module_platform_driver(int0002_driver); diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c index 352fc4596494..6246c066ade2 100644 --- a/drivers/platform/x86/intel/int1092/intel_sar.c +++ b/drivers/platform/x86/intel/int1092/intel_sar.c @@ -292,7 +292,7 @@ r_free: return result; } -static int sar_remove(struct platform_device *device) +static void sar_remove(struct platform_device *device) { struct wwan_sar_context *context = dev_get_drvdata(&device->dev); int reg; @@ -304,12 +304,11 @@ static int sar_remove(struct platform_device *device) kfree(context->config_data[reg].device_mode_info); kfree(context); - return 0; } static struct platform_driver sar_driver = { .probe = sar_probe, - .remove = sar_remove, + .remove_new = sar_remove, .driver = { .name = DRVNAME, .acpi_match_table = ACPI_PTR(sar_device_ids) diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index f064da74f50a..ef020e23e596 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -317,7 +317,7 @@ static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) return 0; } -static int skl_int3472_discrete_remove(struct platform_device *pdev) +static void skl_int3472_discrete_remove(struct platform_device *pdev) { struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); @@ -326,8 +326,6 @@ static int skl_int3472_discrete_remove(struct platform_device *pdev) skl_int3472_unregister_clock(int3472); skl_int3472_unregister_pled(int3472); skl_int3472_unregister_regulator(int3472); - - return 0; } static int skl_int3472_discrete_probe(struct platform_device *pdev) @@ -392,7 +390,7 @@ static struct platform_driver int3472_discrete = { .acpi_match_table = int3472_device_id, }, .probe = skl_int3472_discrete_probe, - .remove = skl_int3472_discrete_remove, + .remove_new = skl_int3472_discrete_remove, }; module_platform_driver(int3472_discrete); diff --git a/drivers/platform/x86/intel/mrfld_pwrbtn.c b/drivers/platform/x86/intel/mrfld_pwrbtn.c index d58fea51747e..549a3f586f3b 100644 --- a/drivers/platform/x86/intel/mrfld_pwrbtn.c +++ b/drivers/platform/x86/intel/mrfld_pwrbtn.c @@ -78,13 +78,12 @@ static int mrfld_pwrbtn_probe(struct platform_device *pdev) return 0; } -static int mrfld_pwrbtn_remove(struct platform_device *pdev) +static void mrfld_pwrbtn_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; dev_pm_clear_wake_irq(dev); device_init_wakeup(dev, false); - return 0; } static const struct platform_device_id mrfld_pwrbtn_id_table[] = { @@ -98,7 +97,7 @@ static struct platform_driver mrfld_pwrbtn_driver = { .name = "mrfld_bcove_pwrbtn", }, .probe = mrfld_pwrbtn_probe, - .remove = mrfld_pwrbtn_remove, + .remove_new = mrfld_pwrbtn_remove, .id_table = mrfld_pwrbtn_id_table, }; module_platform_driver(mrfld_pwrbtn_driver); diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c index b9591969e0fa..61ca7c37fb02 100644 --- a/drivers/platform/x86/intel/pmc/core.c +++ b/drivers/platform/x86/intel/pmc/core.c @@ -1160,7 +1160,7 @@ static int pmc_core_probe(struct platform_device *pdev) return 0; } -static int pmc_core_remove(struct platform_device *pdev) +static void pmc_core_remove(struct platform_device *pdev) { struct pmc_dev *pmcdev = platform_get_drvdata(pdev); @@ -1168,7 +1168,6 @@ static int pmc_core_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); mutex_destroy(&pmcdev->lock); iounmap(pmcdev->regbase); - return 0; } static bool warn_on_s0ix_failures; @@ -1275,7 +1274,7 @@ static struct platform_driver pmc_core_driver = { .dev_groups = pmc_dev_groups, }, .probe = pmc_core_probe, - .remove = pmc_core_remove, + .remove_new = pmc_core_remove, }; module_platform_driver(pmc_core_driver); diff --git a/drivers/platform/x86/intel/pmc/mtl.c b/drivers/platform/x86/intel/pmc/mtl.c index eeb3bd8c2502..e8cc156412ce 100644 --- a/drivers/platform/x86/intel/pmc/mtl.c +++ b/drivers/platform/x86/intel/pmc/mtl.c @@ -8,6 +8,7 @@ * */ +#include <linux/pci.h> #include "core.h" const struct pmc_reg_map mtl_reg_map = { @@ -45,8 +46,38 @@ void mtl_core_configure(struct pmc_dev *pmcdev) pmc_core_send_ltr_ignore(pmcdev, 3); } +#define MTL_GNA_PCI_DEV 0x7e4c +#define MTL_IPU_PCI_DEV 0x7d19 +#define MTL_VPU_PCI_DEV 0x7d1d +static void mtl_set_device_d3(unsigned int device) +{ + struct pci_dev *pcidev; + + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL); + if (pcidev) { + if (!device_trylock(&pcidev->dev)) { + pci_dev_put(pcidev); + return; + } + if (!pcidev->dev.driver) { + dev_info(&pcidev->dev, "Setting to D3hot\n"); + pci_set_power_state(pcidev, PCI_D3hot); + } + device_unlock(&pcidev->dev); + pci_dev_put(pcidev); + } +} + void mtl_core_init(struct pmc_dev *pmcdev) { pmcdev->map = &mtl_reg_map; pmcdev->core_configure = mtl_core_configure; + + /* + * Set power state of select devices that do not have drivers to D3 + * so that they do not block Package C entry. + */ + mtl_set_device_d3(MTL_GNA_PCI_DEV); + mtl_set_device_d3(MTL_IPU_PCI_DEV); + mtl_set_device_d3(MTL_VPU_PCI_DEV); } diff --git a/drivers/platform/x86/intel/pmt/class.c b/drivers/platform/x86/intel/pmt/class.c index 46598dcb634a..0b96d75f5924 100644 --- a/drivers/platform/x86/intel/pmt/class.c +++ b/drivers/platform/x86/intel/pmt/class.c @@ -33,7 +33,7 @@ bool intel_pmt_is_early_client_hw(struct device *dev) */ return !!(ivdev->info->quirks & VSEC_QUIRK_EARLY_HW); } -EXPORT_SYMBOL_GPL(intel_pmt_is_early_client_hw); +EXPORT_SYMBOL_NS_GPL(intel_pmt_is_early_client_hw, INTEL_PMT); static inline int pmt_memcpy64_fromio(void *to, const u64 __iomem *from, size_t count) @@ -327,7 +327,7 @@ int intel_pmt_dev_create(struct intel_pmt_entry *entry, struct intel_pmt_namespa return intel_pmt_dev_register(entry, ns, dev); } -EXPORT_SYMBOL_GPL(intel_pmt_dev_create); +EXPORT_SYMBOL_NS_GPL(intel_pmt_dev_create, INTEL_PMT); void intel_pmt_dev_destroy(struct intel_pmt_entry *entry, struct intel_pmt_namespace *ns) @@ -343,7 +343,7 @@ void intel_pmt_dev_destroy(struct intel_pmt_entry *entry, device_unregister(dev); xa_erase(ns->xa, entry->devid); } -EXPORT_SYMBOL_GPL(intel_pmt_dev_destroy); +EXPORT_SYMBOL_NS_GPL(intel_pmt_dev_destroy, INTEL_PMT); static int __init pmt_class_init(void) { diff --git a/drivers/platform/x86/intel/pmt/crashlog.c b/drivers/platform/x86/intel/pmt/crashlog.c index ace1239bc0a0..bbb3d61d09f4 100644 --- a/drivers/platform/x86/intel/pmt/crashlog.c +++ b/drivers/platform/x86/intel/pmt/crashlog.c @@ -328,3 +328,4 @@ module_exit(pmt_crashlog_exit); MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>"); MODULE_DESCRIPTION("Intel PMT Crashlog driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(INTEL_PMT); diff --git a/drivers/platform/x86/intel/pmt/telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c index 5e4009c05ecf..39cbc87cc28a 100644 --- a/drivers/platform/x86/intel/pmt/telemetry.c +++ b/drivers/platform/x86/intel/pmt/telemetry.c @@ -78,7 +78,7 @@ static int pmt_telem_header_decode(struct intel_pmt_entry *entry, * reserved for future use. They have zero size. Do not fail * probe for these. Just ignore them. */ - if (header->size == 0) + if (header->size == 0 || header->access_type == 0xF) return 1; return 0; @@ -160,3 +160,4 @@ module_exit(pmt_telem_exit); MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); MODULE_DESCRIPTION("Intel PMT Telemetry driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(INTEL_PMT); diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c index 9e0ea2cdd704..556e7c6dbb05 100644 --- a/drivers/platform/x86/intel/sdsi.c +++ b/drivers/platform/x86/intel/sdsi.c @@ -49,7 +49,7 @@ #define SDSI_MBOX_CMD_SUCCESS 0x40 #define SDSI_MBOX_CMD_TIMEOUT 0x80 -#define MBOX_TIMEOUT_US 2000 +#define MBOX_TIMEOUT_US 500000 #define MBOX_TIMEOUT_ACQUIRE_US 1000 #define MBOX_POLLING_PERIOD_US 100 #define MBOX_ACQUIRE_NUM_RETRIES 5 diff --git a/drivers/platform/x86/intel/speed_select_if/Kconfig b/drivers/platform/x86/intel/speed_select_if/Kconfig index ce3e3dc076d2..4eb3ad299db0 100644 --- a/drivers/platform/x86/intel/speed_select_if/Kconfig +++ b/drivers/platform/x86/intel/speed_select_if/Kconfig @@ -2,8 +2,12 @@ menu "Intel Speed Select Technology interface support" depends on PCI depends on X86_64 || COMPILE_TEST +config INTEL_SPEED_SELECT_TPMI + tristate + config INTEL_SPEED_SELECT_INTERFACE tristate "Intel(R) Speed Select Technology interface drivers" + select INTEL_SPEED_SELECT_TPMI if INTEL_TPMI help This config enables the Intel(R) Speed Select Technology interface drivers. The Intel(R) speed select technology features are non diff --git a/drivers/platform/x86/intel/speed_select_if/Makefile b/drivers/platform/x86/intel/speed_select_if/Makefile index 856076206f35..1d878a36d0ab 100644 --- a/drivers/platform/x86/intel/speed_select_if/Makefile +++ b/drivers/platform/x86/intel/speed_select_if/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_common.o obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mmio.o obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_pci.o obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_msr.o +obj-$(CONFIG_INTEL_SPEED_SELECT_TPMI) += isst_tpmi_core.o +obj-$(CONFIG_INTEL_SPEED_SELECT_TPMI) += isst_tpmi.o diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c index 0954a04623ed..e0572a29212e 100644 --- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c @@ -19,9 +19,13 @@ #include <linux/uaccess.h> #include <uapi/linux/isst_if.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + #include "isst_if_common.h" #define MSR_THREAD_ID_INFO 0x53 +#define MSR_PM_LOGICAL_ID 0x54 #define MSR_CPU_BUS_NUMBER 0x128 static struct isst_if_cmd_cb punit_callbacks[ISST_IF_DEV_MAX]; @@ -31,6 +35,7 @@ static int punit_msr_white_list[] = { MSR_CONFIG_TDP_CONTROL, MSR_TURBO_RATIO_LIMIT1, MSR_TURBO_RATIO_LIMIT2, + MSR_PM_LOGICAL_ID, }; struct isst_valid_cmd_ranges { @@ -73,6 +78,8 @@ struct isst_cmd { u32 param; }; +static bool isst_hpm_support; + static DECLARE_HASHTABLE(isst_hash, 8); static DEFINE_MUTEX(isst_hash_lock); @@ -262,11 +269,13 @@ bool isst_if_mbox_cmd_set_req(struct isst_if_mbox_cmd *cmd) } EXPORT_SYMBOL_GPL(isst_if_mbox_cmd_set_req); +static int isst_if_api_version; + static int isst_if_get_platform_info(void __user *argp) { struct isst_if_platform_info info; - info.api_version = ISST_IF_API_VERSION; + info.api_version = isst_if_api_version; info.driver_version = ISST_IF_DRIVER_VERSION; info.max_cmds_per_ioctl = ISST_IF_CMD_LIMIT; info.mbox_supported = punit_callbacks[ISST_IF_DEV_MBOX].registered; @@ -409,11 +418,20 @@ static int isst_if_cpu_online(unsigned int cpu) isst_cpu_info[cpu].pci_dev[1] = _isst_if_get_pci_dev(cpu, 1, 30, 1); } + if (isst_hpm_support) { + + ret = rdmsrl_safe(MSR_PM_LOGICAL_ID, &data); + if (!ret) + goto set_punit_id; + } + ret = rdmsrl_safe(MSR_THREAD_ID_INFO, &data); if (ret) { isst_cpu_info[cpu].punit_cpu_id = -1; return ret; } + +set_punit_id: isst_cpu_info[cpu].punit_cpu_id = data; isst_restore_msr_local(cpu); @@ -588,6 +606,7 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd, struct isst_if_cmd_cb cmd_cb; struct isst_if_cmd_cb *cb; long ret = -ENOTTY; + int i; switch (cmd) { case ISST_IF_GET_PLATFORM_INFO: @@ -616,6 +635,16 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd, ret = isst_if_exec_multi_cmd(argp, &cmd_cb); break; default: + for (i = 0; i < ISST_IF_DEV_MAX; ++i) { + struct isst_if_cmd_cb *cb = &punit_callbacks[i]; + int ret; + + if (cb->def_ioctl) { + ret = cb->def_ioctl(file, cmd, arg); + if (!ret) + return ret; + } + } break; } @@ -691,6 +720,12 @@ static struct miscdevice isst_if_char_driver = { .fops = &isst_if_char_driver_ops, }; +static const struct x86_cpu_id hpm_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(SIERRAFOREST_X, NULL), + {} +}; + static int isst_misc_reg(void) { mutex_lock(&punit_misc_dev_reg_lock); @@ -698,6 +733,12 @@ static int isst_misc_reg(void) goto unlock_exit; if (!misc_usage_count) { + const struct x86_cpu_id *id; + + id = x86_match_cpu(hpm_cpu_ids); + if (id) + isst_hpm_support = true; + misc_device_ret = isst_if_cpu_info_init(); if (misc_device_ret) goto unlock_exit; @@ -756,6 +797,10 @@ int isst_if_cdev_register(int device_type, struct isst_if_cmd_cb *cb) mutex_unlock(&punit_misc_dev_open_lock); return -EAGAIN; } + if (!cb->api_version) + cb->api_version = ISST_IF_API_VERSION; + if (cb->api_version > isst_if_api_version) + isst_if_api_version = cb->api_version; memcpy(&punit_callbacks[device_type], cb, sizeof(*cb)); punit_callbacks[device_type].registered = 1; mutex_unlock(&punit_misc_dev_open_lock); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.h b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h index 35ff506b402e..1004f2c9cca8 100644 --- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h @@ -30,7 +30,8 @@ #define ISST_IF_DEV_MBOX 0 #define ISST_IF_DEV_MMIO 1 -#define ISST_IF_DEV_MAX 2 +#define ISST_IF_DEV_TPMI 2 +#define ISST_IF_DEV_MAX 3 /** * struct isst_if_cmd_cb - Used to register a IOCTL handler @@ -40,6 +41,7 @@ * @offset: Offset to the first valid member in command structure. * This will be the offset of the start of the command * after command count field + * @api_version: API version supported for this target. 0, if none. * @owner: Registered module owner * @cmd_callback: Callback function to handle IOCTL. The callback has the * command pointer with data for command. There is a pointer @@ -47,6 +49,8 @@ * response to user ioctl buffer. The "resume" argument * can be used to avoid storing the command for replay * during system resume + * @def_ioctl: Default IOCTL handler callback, if there is no match in + * the existing list of IOCTL handled by the common handler. * * This structure is used to register an handler for IOCTL. To avoid * code duplication common code handles all the IOCTL command read/write @@ -57,8 +61,10 @@ struct isst_if_cmd_cb { int registered; int cmd_size; int offset; + int api_version; struct module *owner; long (*cmd_callback)(u8 *ptr, int *write_only, int resume); + long (*def_ioctl)(struct file *file, unsigned int cmd, unsigned long arg); }; /* Internal interface functions */ diff --git a/drivers/platform/x86/intel/speed_select_if/isst_tpmi.c b/drivers/platform/x86/intel/speed_select_if/isst_tpmi.c new file mode 100644 index 000000000000..17972191538a --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_tpmi.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * isst_tpmi.c: SST TPMI interface + * + * Copyright (c) 2023, Intel Corporation. + * All Rights Reserved. + * + */ + +#include <linux/auxiliary_bus.h> +#include <linux/module.h> +#include <linux/intel_tpmi.h> + +#include "isst_tpmi_core.h" + +static int intel_sst_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id) +{ + int ret; + + ret = tpmi_sst_init(); + if (ret) + return ret; + + ret = tpmi_sst_dev_add(auxdev); + if (ret) + tpmi_sst_exit(); + + return ret; +} + +static void intel_sst_remove(struct auxiliary_device *auxdev) +{ + tpmi_sst_dev_remove(auxdev); + tpmi_sst_exit(); +} + +static int intel_sst_suspend(struct device *dev) +{ + tpmi_sst_dev_suspend(to_auxiliary_dev(dev)); + + return 0; +} + +static int intel_sst_resume(struct device *dev) +{ + tpmi_sst_dev_resume(to_auxiliary_dev(dev)); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(intel_sst_pm, intel_sst_suspend, intel_sst_resume); + +static const struct auxiliary_device_id intel_sst_id_table[] = { + { .name = "intel_vsec.tpmi-sst" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, intel_sst_id_table); + +static struct auxiliary_driver intel_sst_aux_driver = { + .id_table = intel_sst_id_table, + .remove = intel_sst_remove, + .probe = intel_sst_probe, + .driver = { + .pm = pm_sleep_ptr(&intel_sst_pm), + }, +}; + +module_auxiliary_driver(intel_sst_aux_driver); + +MODULE_IMPORT_NS(INTEL_TPMI_SST); +MODULE_DESCRIPTION("Intel TPMI SST Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c new file mode 100644 index 000000000000..664d2ee60385 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c @@ -0,0 +1,1440 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * isst_tpmi.c: SST TPMI interface core + * + * Copyright (c) 2023, Intel Corporation. + * All Rights Reserved. + * + * This information will be useful to understand flows: + * In the current generation of platforms, TPMI is supported via OOB + * PCI device. This PCI device has one instance per CPU package. + * There is a unique TPMI ID for SST. Each TPMI ID also has multiple + * entries, representing per power domain information. + * + * There is one dev file for complete SST information and control same as the + * prior generation of hardware. User spaces don't need to know how the + * information is presented by the hardware. The TPMI core module implements + * the hardware mapping. + */ + +#include <linux/auxiliary_bus.h> +#include <linux/delay.h> +#include <linux/intel_tpmi.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <uapi/linux/isst_if.h> + +#include "isst_tpmi_core.h" +#include "isst_if_common.h" + +/* Supported SST hardware version by this driver */ +#define ISST_HEADER_VERSION 1 + +/* + * Used to indicate if value read from MMIO needs to get multiplied + * to get to a standard unit or not. + */ +#define SST_MUL_FACTOR_NONE 1 + +/* Define 100 as a scaling factor frequency ratio to frequency conversion */ +#define SST_MUL_FACTOR_FREQ 100 + +/* All SST regs are 64 bit size */ +#define SST_REG_SIZE 8 + +/** + * struct sst_header - SST main header + * @interface_version: Version number for this interface + * @cap_mask: Bitmask of the supported sub features. 1=the sub feature is enabled. + * 0=disabled. + * Bit[8]= SST_CP enable (1), disable (0) + * bit[9]= SST_PP enable (1), disable (0) + * other bits are reserved for future use + * @cp_offset: Qword (8 bytes) offset to the SST_CP register bank + * @pp_offset: Qword (8 bytes) offset to the SST_PP register bank + * @reserved: Reserved for future use + * + * This register allows SW to discover SST capability and the offsets to SST-CP + * and SST-PP register banks. + */ +struct sst_header { + u8 interface_version; + u8 cap_mask; + u8 cp_offset; + u8 pp_offset; + u32 reserved; +} __packed; + +/** + * struct cp_header - SST-CP (core-power) header + * @feature_id: 0=SST-CP, 1=SST-PP, 2=SST-BF, 3=SST-TF + * @feature_rev: Interface Version number for this SST feature + * @ratio_unit: Frequency ratio unit. 00: 100MHz. All others are reserved + * @reserved: Reserved for future use + * + * This structure is used store SST-CP header. This is packed to the same + * format as defined in the specifications. + */ +struct cp_header { + u64 feature_id :4; + u64 feature_rev :8; + u64 ratio_unit :2; + u64 reserved :50; +} __packed; + +/** + * struct pp_header - SST-PP (Perf profile) header + * @feature_id: 0=SST-CP, 1=SST-PP, 2=SST-BF, 3=SST-TF + * @feature_rev: Interface Version number for this SST feature + * @level_en_mask: SST-PP level enable/disable fuse mask + * @allowed_level_mask: Allowed level mask used for dynamic config level switching + * @reserved0: Reserved for future use + * @ratio_unit: Frequency ratio unit. 00: 100MHz. All others are reserved + * @block_size: Size of PP block in Qword unit (8 bytes) + * @dynamic_switch: If set (1), dynamic switching of SST PP is supported + * @memory_ratio_unit: Memory Controller frequency ratio unit. 00: 100MHz, others reserved + * @reserved1: Reserved for future use + * + * This structure is used store SST-PP header. This is packed to the same + * format as defined in the specifications. + */ +struct pp_header { + u64 feature_id :4; + u64 feature_rev :8; + u64 level_en_mask :8; + u64 allowed_level_mask :8; + u64 reserved0 :4; + u64 ratio_unit :2; + u64 block_size :8; + u64 dynamic_switch :1; + u64 memory_ratio_unit :2; + u64 reserved1 :19; +} __packed; + +/** + * struct feature_offset - Offsets to SST-PP features + * @pp_offset: Qword offset within PP level for the SST_PP register bank + * @bf_offset: Qword offset within PP level for the SST_BF register bank + * @tf_offset: Qword offset within PP level for the SST_TF register bank + * @reserved: Reserved for future use + * + * This structure is used store offsets for SST features in the register bank. + * This is packed to the same format as defined in the specifications. + */ +struct feature_offset { + u64 pp_offset :8; + u64 bf_offset :8; + u64 tf_offset :8; + u64 reserved :40; +} __packed; + +/** + * struct levels_offset - Offsets to each SST PP level + * @sst_pp_level0_offset: Qword offset to the register block of PP level 0 + * @sst_pp_level1_offset: Qword offset to the register block of PP level 1 + * @sst_pp_level2_offset: Qword offset to the register block of PP level 2 + * @sst_pp_level3_offset: Qword offset to the register block of PP level 3 + * @sst_pp_level4_offset: Qword offset to the register block of PP level 4 + * @reserved: Reserved for future use + * + * This structure is used store offsets of SST PP levels in the register bank. + * This is packed to the same format as defined in the specifications. + */ +struct levels_offset { + u64 sst_pp_level0_offset :8; + u64 sst_pp_level1_offset :8; + u64 sst_pp_level2_offset :8; + u64 sst_pp_level3_offset :8; + u64 sst_pp_level4_offset :8; + u64 reserved :24; +} __packed; + +/** + * struct pp_control_offset - Offsets for SST PP controls + * @perf_level: A SST-PP level that SW intends to switch to + * @perf_level_lock: SST-PP level select lock. 0 - unlocked. 1 - locked till next reset + * @resvd0: Reserved for future use + * @current_state: Bit mask to control the enable(1)/disable(0) state of each feature + * of the current PP level, bit 0 = BF, bit 1 = TF, bit 2-7 = reserved + * @reserved: Reserved for future use + * + * This structure is used store offsets of SST PP controls in the register bank. + * This is packed to the same format as defined in the specifications. + */ +struct pp_control_offset { + u64 perf_level :3; + u64 perf_level_lock :1; + u64 resvd0 :4; + u64 current_state :8; + u64 reserved :48; +} __packed; + +/** + * struct pp_status_offset - Offsets for SST PP status fields + * @sst_pp_level: Returns the current SST-PP level + * @sst_pp_lock: Returns the lock bit setting of perf_level_lock in pp_control_offset + * @error_type: Returns last error of SST-PP level change request. 0: no error, + * 1: level change not allowed, others: reserved + * @feature_state: Bit mask to indicate the enable(1)/disable(0) state of each feature of the + * current PP level. bit 0 = BF, bit 1 = TF, bit 2-7 reserved + * @reserved0: Reserved for future use + * @feature_error_type: Returns last error of the specific feature. Three error_type bits per + * feature. i.e. ERROR_TYPE[2:0] for BF, ERROR_TYPE[5:3] for TF, etc. + * 0x0: no error, 0x1: The specific feature is not supported by the hardware. + * 0x2-0x6: Reserved. 0x7: feature state change is not allowed. + * @reserved1: Reserved for future use + * + * This structure is used store offsets of SST PP status in the register bank. + * This is packed to the same format as defined in the specifications. + */ +struct pp_status_offset { + u64 sst_pp_level :3; + u64 sst_pp_lock :1; + u64 error_type :4; + u64 feature_state :8; + u64 reserved0 :16; + u64 feature_error_type : 24; + u64 reserved1 :8; +} __packed; + +/** + * struct perf_level - Used to store perf level and mmio offset + * @mmio_offset: mmio offset for a perf level + * @level: perf level for this offset + * + * This structure is used store final mmio offset of each perf level from the + * SST base mmio offset. + */ +struct perf_level { + int mmio_offset; + int level; +}; + +/** + * struct tpmi_per_power_domain_info - Store per power_domain SST info + * @package_id: Package id for this power_domain + * @power_domain_id: Power domain id, Each entry from the SST-TPMI instance is a power_domain. + * @max_level: Max possible PP level possible for this power_domain + * @ratio_unit: Ratio unit for converting to MHz + * @avx_levels: Number of AVX levels + * @pp_block_size: Block size from PP header + * @sst_header: Store SST header for this power_domain + * @cp_header: Store SST-CP header for this power_domain + * @pp_header: Store SST-PP header for this power_domain + * @perf_levels: Pointer to each perf level to map level to mmio offset + * @feature_offsets: Store feature offsets for each PP-level + * @control_offset: Store the control offset for each PP-level + * @status_offset: Store the status offset for each PP-level + * @sst_base: Mapped SST base IO memory + * @auxdev: Auxiliary device instance enumerated this instance + * @saved_sst_cp_control: Save SST-CP control configuration to store restore for suspend/resume + * @saved_clos_configs: Save SST-CP CLOS configuration to store restore for suspend/resume + * @saved_clos_assocs: Save SST-CP CLOS association to store restore for suspend/resume + * @saved_pp_control: Save SST-PP control information to store restore for suspend/resume + * + * This structure is used store complete SST information for a power_domain. This information + * is used to read/write request for any SST IOCTL. Each physical CPU package can have multiple + * power_domains. Each power domain describes its own SST information and has its own controls. + */ +struct tpmi_per_power_domain_info { + int package_id; + int power_domain_id; + int max_level; + int ratio_unit; + int avx_levels; + int pp_block_size; + struct sst_header sst_header; + struct cp_header cp_header; + struct pp_header pp_header; + struct perf_level *perf_levels; + struct feature_offset feature_offsets; + struct pp_control_offset control_offset; + struct pp_status_offset status_offset; + void __iomem *sst_base; + struct auxiliary_device *auxdev; + u64 saved_sst_cp_control; + u64 saved_clos_configs[4]; + u64 saved_clos_assocs[4]; + u64 saved_pp_control; +}; + +/** + * struct tpmi_sst_struct - Store sst info for a package + * @package_id: Package id for this aux device instance + * @number_of_power_domains: Number of power_domains pointed by power_domain_info pointer + * @power_domain_info: Pointer to power domains information + * + * This structure is used store full SST information for a package. + * Each package has a unique OOB PCI device, which enumerates TPMI. + * Each Package will have multiple power_domains. + */ +struct tpmi_sst_struct { + int package_id; + int number_of_power_domains; + struct tpmi_per_power_domain_info *power_domain_info; +}; + +/** + * struct tpmi_sst_common_struct - Store all SST instances + * @max_index: Maximum instances currently present + * @sst_inst: Pointer to per package instance + * + * Stores every SST Package instance. + */ +struct tpmi_sst_common_struct { + int max_index; + struct tpmi_sst_struct **sst_inst; +}; + +/* + * Each IOCTL request is processed under this lock. Also used to protect + * registration functions and common data structures. + */ +static DEFINE_MUTEX(isst_tpmi_dev_lock); + +/* Usage count to track, number of TPMI SST instances registered to this core. */ +static int isst_core_usage_count; + +/* Stores complete SST information for every package and power_domain */ +static struct tpmi_sst_common_struct isst_common; + +#define SST_MAX_AVX_LEVELS 3 + +#define SST_PP_OFFSET_0 8 +#define SST_PP_OFFSET_1 16 +#define SST_PP_OFFSET_SIZE 8 + +static int sst_add_perf_profiles(struct auxiliary_device *auxdev, + struct tpmi_per_power_domain_info *pd_info, + int levels) +{ + u64 perf_level_offsets; + int i; + + pd_info->perf_levels = devm_kcalloc(&auxdev->dev, levels, + sizeof(struct perf_level), + GFP_KERNEL); + if (!pd_info->perf_levels) + return 0; + + pd_info->ratio_unit = pd_info->pp_header.ratio_unit; + pd_info->avx_levels = SST_MAX_AVX_LEVELS; + pd_info->pp_block_size = pd_info->pp_header.block_size; + + /* Read PP Offset 0: Get feature offset with PP level */ + *((u64 *)&pd_info->feature_offsets) = readq(pd_info->sst_base + + pd_info->sst_header.pp_offset + + SST_PP_OFFSET_0); + + perf_level_offsets = readq(pd_info->sst_base + pd_info->sst_header.pp_offset + + SST_PP_OFFSET_1); + + for (i = 0; i < levels; ++i) { + u64 offset; + + offset = perf_level_offsets & (0xffULL << (i * SST_PP_OFFSET_SIZE)); + offset >>= (i * 8); + offset &= 0xff; + offset *= 8; /* Convert to byte from QWORD offset */ + pd_info->perf_levels[i].mmio_offset = pd_info->sst_header.pp_offset + offset; + } + + return 0; +} + +static int sst_main(struct auxiliary_device *auxdev, struct tpmi_per_power_domain_info *pd_info) +{ + int i, mask, levels; + + *((u64 *)&pd_info->sst_header) = readq(pd_info->sst_base); + pd_info->sst_header.cp_offset *= 8; + pd_info->sst_header.pp_offset *= 8; + + if (pd_info->sst_header.interface_version != ISST_HEADER_VERSION) { + dev_err(&auxdev->dev, "SST: Unsupported version:%x\n", + pd_info->sst_header.interface_version); + return -ENODEV; + } + + /* Read SST CP Header */ + *((u64 *)&pd_info->cp_header) = readq(pd_info->sst_base + pd_info->sst_header.cp_offset); + + /* Read PP header */ + *((u64 *)&pd_info->pp_header) = readq(pd_info->sst_base + pd_info->sst_header.pp_offset); + + /* Force level_en_mask level 0 */ + pd_info->pp_header.level_en_mask |= 0x01; + + mask = 0x01; + levels = 0; + for (i = 0; i < 8; ++i) { + if (pd_info->pp_header.level_en_mask & mask) + levels = i; + mask <<= 1; + } + pd_info->max_level = levels; + sst_add_perf_profiles(auxdev, pd_info, levels + 1); + + return 0; +} + +/* + * Map a package and power_domain id to SST information structure unique for a power_domain. + * The caller should call under isst_tpmi_dev_lock. + */ +static struct tpmi_per_power_domain_info *get_instance(int pkg_id, int power_domain_id) +{ + struct tpmi_per_power_domain_info *power_domain_info; + struct tpmi_sst_struct *sst_inst; + + if (pkg_id < 0 || pkg_id > isst_common.max_index || + pkg_id >= topology_max_packages()) + return NULL; + + sst_inst = isst_common.sst_inst[pkg_id]; + if (!sst_inst) + return NULL; + + if (power_domain_id < 0 || power_domain_id >= sst_inst->number_of_power_domains) + return NULL; + + power_domain_info = &sst_inst->power_domain_info[power_domain_id]; + + if (power_domain_info && !power_domain_info->sst_base) + return NULL; + + return power_domain_info; +} + +static bool disable_dynamic_sst_features(void) +{ + u64 value; + + rdmsrl(MSR_PM_ENABLE, value); + return !(value & 0x1); +} + +#define _read_cp_info(name_str, name, offset, start, width, mult_factor)\ +{\ + u64 val, mask;\ + \ + val = readq(power_domain_info->sst_base + power_domain_info->sst_header.cp_offset +\ + (offset));\ + mask = GENMASK_ULL((start + width - 1), start);\ + val &= mask; \ + val >>= start;\ + name = (val * mult_factor);\ +} + +#define _write_cp_info(name_str, name, offset, start, width, div_factor)\ +{\ + u64 val, mask;\ + \ + val = readq(power_domain_info->sst_base +\ + power_domain_info->sst_header.cp_offset + (offset));\ + mask = GENMASK_ULL((start + width - 1), start);\ + val &= ~mask;\ + val |= (name / div_factor) << start;\ + writeq(val, power_domain_info->sst_base + power_domain_info->sst_header.cp_offset +\ + (offset));\ +} + +#define SST_CP_CONTROL_OFFSET 8 +#define SST_CP_STATUS_OFFSET 16 + +#define SST_CP_ENABLE_START 0 +#define SST_CP_ENABLE_WIDTH 1 + +#define SST_CP_PRIORITY_TYPE_START 1 +#define SST_CP_PRIORITY_TYPE_WIDTH 1 + +static long isst_if_core_power_state(void __user *argp) +{ + struct tpmi_per_power_domain_info *power_domain_info; + struct isst_core_power core_power; + + if (disable_dynamic_sst_features()) + return -EFAULT; + + if (copy_from_user(&core_power, argp, sizeof(core_power))) + return -EFAULT; + + power_domain_info = get_instance(core_power.socket_id, core_power.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (core_power.get_set) { + _write_cp_info("cp_enable", core_power.enable, SST_CP_CONTROL_OFFSET, + SST_CP_ENABLE_START, SST_CP_ENABLE_WIDTH, SST_MUL_FACTOR_NONE) + _write_cp_info("cp_prio_type", core_power.priority_type, SST_CP_CONTROL_OFFSET, + SST_CP_PRIORITY_TYPE_START, SST_CP_PRIORITY_TYPE_WIDTH, + SST_MUL_FACTOR_NONE) + } else { + /* get */ + _read_cp_info("cp_enable", core_power.enable, SST_CP_STATUS_OFFSET, + SST_CP_ENABLE_START, SST_CP_ENABLE_WIDTH, SST_MUL_FACTOR_NONE) + _read_cp_info("cp_prio_type", core_power.priority_type, SST_CP_STATUS_OFFSET, + SST_CP_PRIORITY_TYPE_START, SST_CP_PRIORITY_TYPE_WIDTH, + SST_MUL_FACTOR_NONE) + core_power.supported = !!(power_domain_info->sst_header.cap_mask & BIT(0)); + if (copy_to_user(argp, &core_power, sizeof(core_power))) + return -EFAULT; + } + + return 0; +} + +#define SST_CLOS_CONFIG_0_OFFSET 24 + +#define SST_CLOS_CONFIG_PRIO_START 4 +#define SST_CLOS_CONFIG_PRIO_WIDTH 4 + +#define SST_CLOS_CONFIG_MIN_START 8 +#define SST_CLOS_CONFIG_MIN_WIDTH 8 + +#define SST_CLOS_CONFIG_MAX_START 16 +#define SST_CLOS_CONFIG_MAX_WIDTH 8 + +static long isst_if_clos_param(void __user *argp) +{ + struct tpmi_per_power_domain_info *power_domain_info; + struct isst_clos_param clos_param; + + if (copy_from_user(&clos_param, argp, sizeof(clos_param))) + return -EFAULT; + + power_domain_info = get_instance(clos_param.socket_id, clos_param.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (clos_param.get_set) { + _write_cp_info("clos.min_freq", clos_param.min_freq_mhz, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_MIN_START, SST_CLOS_CONFIG_MIN_WIDTH, + SST_MUL_FACTOR_FREQ); + _write_cp_info("clos.max_freq", clos_param.max_freq_mhz, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_MAX_START, SST_CLOS_CONFIG_MAX_WIDTH, + SST_MUL_FACTOR_FREQ); + _write_cp_info("clos.prio", clos_param.prop_prio, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_PRIO_START, SST_CLOS_CONFIG_PRIO_WIDTH, + SST_MUL_FACTOR_NONE); + } else { + /* get */ + _read_cp_info("clos.min_freq", clos_param.min_freq_mhz, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_MIN_START, SST_CLOS_CONFIG_MIN_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_cp_info("clos.max_freq", clos_param.max_freq_mhz, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_MAX_START, SST_CLOS_CONFIG_MAX_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_cp_info("clos.prio", clos_param.prop_prio, + (SST_CLOS_CONFIG_0_OFFSET + clos_param.clos * SST_REG_SIZE), + SST_CLOS_CONFIG_PRIO_START, SST_CLOS_CONFIG_PRIO_WIDTH, + SST_MUL_FACTOR_NONE) + + if (copy_to_user(argp, &clos_param, sizeof(clos_param))) + return -EFAULT; + } + + return 0; +} + +#define SST_CLOS_ASSOC_0_OFFSET 56 +#define SST_CLOS_ASSOC_CPUS_PER_REG 16 +#define SST_CLOS_ASSOC_BITS_PER_CPU 4 + +static long isst_if_clos_assoc(void __user *argp) +{ + struct isst_if_clos_assoc_cmds assoc_cmds; + unsigned char __user *ptr; + int i; + + /* Each multi command has u16 command count as the first field */ + if (copy_from_user(&assoc_cmds, argp, sizeof(assoc_cmds))) + return -EFAULT; + + if (!assoc_cmds.cmd_count || assoc_cmds.cmd_count > ISST_IF_CMD_LIMIT) + return -EINVAL; + + ptr = argp + offsetof(struct isst_if_clos_assoc_cmds, assoc_info); + for (i = 0; i < assoc_cmds.cmd_count; ++i) { + struct tpmi_per_power_domain_info *power_domain_info; + struct isst_if_clos_assoc clos_assoc; + int punit_id, punit_cpu_no, pkg_id; + struct tpmi_sst_struct *sst_inst; + int offset, shift, cpu; + u64 val, mask, clos; + + if (copy_from_user(&clos_assoc, ptr, sizeof(clos_assoc))) + return -EFAULT; + + if (clos_assoc.socket_id > topology_max_packages()) + return -EINVAL; + + cpu = clos_assoc.logical_cpu; + clos = clos_assoc.clos; + + if (assoc_cmds.punit_cpu_map) + punit_cpu_no = cpu; + else + return -EOPNOTSUPP; + + if (punit_cpu_no < 0) + return -EINVAL; + + punit_id = clos_assoc.power_domain_id; + pkg_id = clos_assoc.socket_id; + + sst_inst = isst_common.sst_inst[pkg_id]; + + if (clos_assoc.power_domain_id > sst_inst->number_of_power_domains) + return -EINVAL; + + power_domain_info = &sst_inst->power_domain_info[punit_id]; + + offset = SST_CLOS_ASSOC_0_OFFSET + + (punit_cpu_no / SST_CLOS_ASSOC_CPUS_PER_REG) * SST_REG_SIZE; + shift = punit_cpu_no % SST_CLOS_ASSOC_CPUS_PER_REG; + shift *= SST_CLOS_ASSOC_BITS_PER_CPU; + + val = readq(power_domain_info->sst_base + + power_domain_info->sst_header.cp_offset + offset); + if (assoc_cmds.get_set) { + mask = GENMASK_ULL((shift + SST_CLOS_ASSOC_BITS_PER_CPU - 1), shift); + val &= ~mask; + val |= (clos << shift); + writeq(val, power_domain_info->sst_base + + power_domain_info->sst_header.cp_offset + offset); + } else { + val >>= shift; + clos_assoc.clos = val & GENMASK(SST_CLOS_ASSOC_BITS_PER_CPU - 1, 0); + if (copy_to_user(ptr, &clos_assoc, sizeof(clos_assoc))) + return -EFAULT; + } + + ptr += sizeof(clos_assoc); + } + + return 0; +} + +#define _read_pp_info(name_str, name, offset, start, width, mult_factor)\ +{\ + u64 val, _mask;\ + \ + val = readq(power_domain_info->sst_base + power_domain_info->sst_header.pp_offset +\ + (offset));\ + _mask = GENMASK_ULL((start + width - 1), start);\ + val &= _mask;\ + val >>= start;\ + name = (val * mult_factor);\ +} + +#define _write_pp_info(name_str, name, offset, start, width, div_factor)\ +{\ + u64 val, _mask;\ + \ + val = readq(power_domain_info->sst_base + power_domain_info->sst_header.pp_offset +\ + (offset));\ + _mask = GENMASK((start + width - 1), start);\ + val &= ~_mask;\ + val |= (name / div_factor) << start;\ + writeq(val, power_domain_info->sst_base + power_domain_info->sst_header.pp_offset +\ + (offset));\ +} + +#define _read_bf_level_info(name_str, name, level, offset, start, width, mult_factor)\ +{\ + u64 val, _mask;\ + \ + val = readq(power_domain_info->sst_base +\ + power_domain_info->perf_levels[level].mmio_offset +\ + (power_domain_info->feature_offsets.bf_offset * 8) + (offset));\ + _mask = GENMASK_ULL((start + width - 1), start);\ + val &= _mask; \ + val >>= start;\ + name = (val * mult_factor);\ +} + +#define _read_tf_level_info(name_str, name, level, offset, start, width, mult_factor)\ +{\ + u64 val, _mask;\ + \ + val = readq(power_domain_info->sst_base +\ + power_domain_info->perf_levels[level].mmio_offset +\ + (power_domain_info->feature_offsets.tf_offset * 8) + (offset));\ + _mask = GENMASK_ULL((start + width - 1), start);\ + val &= _mask; \ + val >>= start;\ + name = (val * mult_factor);\ +} + +#define SST_PP_STATUS_OFFSET 32 + +#define SST_PP_LEVEL_START 0 +#define SST_PP_LEVEL_WIDTH 3 + +#define SST_PP_LOCK_START 3 +#define SST_PP_LOCK_WIDTH 1 + +#define SST_PP_FEATURE_STATE_START 8 +#define SST_PP_FEATURE_STATE_WIDTH 8 + +#define SST_BF_FEATURE_SUPPORTED_START 12 +#define SST_BF_FEATURE_SUPPORTED_WIDTH 1 + +#define SST_TF_FEATURE_SUPPORTED_START 12 +#define SST_TF_FEATURE_SUPPORTED_WIDTH 1 + +static int isst_if_get_perf_level(void __user *argp) +{ + struct isst_perf_level_info perf_level; + struct tpmi_per_power_domain_info *power_domain_info; + + if (copy_from_user(&perf_level, argp, sizeof(perf_level))) + return -EFAULT; + + power_domain_info = get_instance(perf_level.socket_id, perf_level.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + perf_level.max_level = power_domain_info->max_level; + perf_level.level_mask = power_domain_info->pp_header.allowed_level_mask; + perf_level.feature_rev = power_domain_info->pp_header.feature_rev; + _read_pp_info("current_level", perf_level.current_level, SST_PP_STATUS_OFFSET, + SST_PP_LEVEL_START, SST_PP_LEVEL_WIDTH, SST_MUL_FACTOR_NONE) + _read_pp_info("locked", perf_level.locked, SST_PP_STATUS_OFFSET, + SST_PP_LOCK_START, SST_PP_LEVEL_WIDTH, SST_MUL_FACTOR_NONE) + _read_pp_info("feature_state", perf_level.feature_state, SST_PP_STATUS_OFFSET, + SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, SST_MUL_FACTOR_NONE) + perf_level.enabled = !!(power_domain_info->sst_header.cap_mask & BIT(1)); + + _read_bf_level_info("bf_support", perf_level.sst_bf_support, 0, 0, + SST_BF_FEATURE_SUPPORTED_START, SST_BF_FEATURE_SUPPORTED_WIDTH, + SST_MUL_FACTOR_NONE); + _read_tf_level_info("tf_support", perf_level.sst_tf_support, 0, 0, + SST_TF_FEATURE_SUPPORTED_START, SST_TF_FEATURE_SUPPORTED_WIDTH, + SST_MUL_FACTOR_NONE); + + if (copy_to_user(argp, &perf_level, sizeof(perf_level))) + return -EFAULT; + + return 0; +} + +#define SST_PP_CONTROL_OFFSET 24 +#define SST_PP_LEVEL_CHANGE_TIME_MS 5 +#define SST_PP_LEVEL_CHANGE_RETRY_COUNT 3 + +static int isst_if_set_perf_level(void __user *argp) +{ + struct isst_perf_level_control perf_level; + struct tpmi_per_power_domain_info *power_domain_info; + int level, retry = 0; + + if (disable_dynamic_sst_features()) + return -EFAULT; + + if (copy_from_user(&perf_level, argp, sizeof(perf_level))) + return -EFAULT; + + power_domain_info = get_instance(perf_level.socket_id, perf_level.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (!(power_domain_info->pp_header.allowed_level_mask & BIT(perf_level.level))) + return -EINVAL; + + _read_pp_info("current_level", level, SST_PP_STATUS_OFFSET, + SST_PP_LEVEL_START, SST_PP_LEVEL_WIDTH, SST_MUL_FACTOR_NONE) + + /* If the requested new level is same as the current level, reject */ + if (perf_level.level == level) + return -EINVAL; + + _write_pp_info("perf_level", perf_level.level, SST_PP_CONTROL_OFFSET, + SST_PP_LEVEL_START, SST_PP_LEVEL_WIDTH, SST_MUL_FACTOR_NONE) + + /* It is possible that firmware is busy (although unlikely), so retry */ + do { + /* Give time to FW to process */ + msleep(SST_PP_LEVEL_CHANGE_TIME_MS); + + _read_pp_info("current_level", level, SST_PP_STATUS_OFFSET, + SST_PP_LEVEL_START, SST_PP_LEVEL_WIDTH, SST_MUL_FACTOR_NONE) + + /* Check if the new level is active */ + if (perf_level.level == level) + break; + + } while (retry++ < SST_PP_LEVEL_CHANGE_RETRY_COUNT); + + /* If the level change didn't happen, return fault */ + if (perf_level.level != level) + return -EFAULT; + + /* Reset the feature state on level change */ + _write_pp_info("perf_feature", 0, SST_PP_CONTROL_OFFSET, + SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, + SST_MUL_FACTOR_NONE) + + /* Give time to FW to process */ + msleep(SST_PP_LEVEL_CHANGE_TIME_MS); + + return 0; +} + +static int isst_if_set_perf_feature(void __user *argp) +{ + struct isst_perf_feature_control perf_feature; + struct tpmi_per_power_domain_info *power_domain_info; + + if (disable_dynamic_sst_features()) + return -EFAULT; + + if (copy_from_user(&perf_feature, argp, sizeof(perf_feature))) + return -EFAULT; + + power_domain_info = get_instance(perf_feature.socket_id, perf_feature.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + _write_pp_info("perf_feature", perf_feature.feature, SST_PP_CONTROL_OFFSET, + SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, + SST_MUL_FACTOR_NONE) + + return 0; +} + +#define _read_pp_level_info(name_str, name, level, offset, start, width, mult_factor)\ +{\ + u64 val, _mask;\ + \ + val = readq(power_domain_info->sst_base +\ + power_domain_info->perf_levels[level].mmio_offset +\ + (power_domain_info->feature_offsets.pp_offset * 8) + (offset));\ + _mask = GENMASK_ULL((start + width - 1), start);\ + val &= _mask; \ + val >>= start;\ + name = (val * mult_factor);\ +} + +#define SST_PP_INFO_0_OFFSET 0 +#define SST_PP_INFO_1_OFFSET 8 +#define SST_PP_INFO_2_OFFSET 16 +#define SST_PP_INFO_3_OFFSET 24 + +/* SST_PP_INFO_4_OFFSET to SST_PP_INFO_9_OFFSET are trl levels */ +#define SST_PP_INFO_4_OFFSET 32 + +#define SST_PP_INFO_10_OFFSET 80 +#define SST_PP_INFO_11_OFFSET 88 + +#define SST_PP_P1_SSE_START 0 +#define SST_PP_P1_SSE_WIDTH 8 + +#define SST_PP_P1_AVX2_START 8 +#define SST_PP_P1_AVX2_WIDTH 8 + +#define SST_PP_P1_AVX512_START 16 +#define SST_PP_P1_AVX512_WIDTH 8 + +#define SST_PP_P1_AMX_START 24 +#define SST_PP_P1_AMX_WIDTH 8 + +#define SST_PP_TDP_START 32 +#define SST_PP_TDP_WIDTH 15 + +#define SST_PP_T_PROCHOT_START 47 +#define SST_PP_T_PROCHOT_WIDTH 8 + +#define SST_PP_MAX_MEMORY_FREQ_START 55 +#define SST_PP_MAX_MEMORY_FREQ_WIDTH 7 + +#define SST_PP_COOLING_TYPE_START 62 +#define SST_PP_COOLING_TYPE_WIDTH 2 + +#define SST_PP_TRL_0_RATIO_0_START 0 +#define SST_PP_TRL_0_RATIO_0_WIDTH 8 + +#define SST_PP_TRL_CORES_BUCKET_0_START 0 +#define SST_PP_TRL_CORES_BUCKET_0_WIDTH 8 + +#define SST_PP_CORE_RATIO_P0_START 0 +#define SST_PP_CORE_RATIO_P0_WIDTH 8 + +#define SST_PP_CORE_RATIO_P1_START 8 +#define SST_PP_CORE_RATIO_P1_WIDTH 8 + +#define SST_PP_CORE_RATIO_PN_START 16 +#define SST_PP_CORE_RATIO_PN_WIDTH 8 + +#define SST_PP_CORE_RATIO_PM_START 24 +#define SST_PP_CORE_RATIO_PM_WIDTH 8 + +#define SST_PP_CORE_RATIO_P0_FABRIC_START 32 +#define SST_PP_CORE_RATIO_P0_FABRIC_WIDTH 8 + +#define SST_PP_CORE_RATIO_P1_FABRIC_START 40 +#define SST_PP_CORE_RATIO_P1_FABRIC_WIDTH 8 + +#define SST_PP_CORE_RATIO_PM_FABRIC_START 48 +#define SST_PP_CORE_RATIO_PM_FABRIC_WIDTH 8 + +static int isst_if_get_perf_level_info(void __user *argp) +{ + struct isst_perf_level_data_info perf_level; + struct tpmi_per_power_domain_info *power_domain_info; + int i, j; + + if (copy_from_user(&perf_level, argp, sizeof(perf_level))) + return -EFAULT; + + power_domain_info = get_instance(perf_level.socket_id, perf_level.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (perf_level.level > power_domain_info->max_level) + return -EINVAL; + + if (!(power_domain_info->pp_header.level_en_mask & BIT(perf_level.level))) + return -EINVAL; + + _read_pp_level_info("tdp_ratio", perf_level.tdp_ratio, perf_level.level, + SST_PP_INFO_0_OFFSET, SST_PP_P1_SSE_START, SST_PP_P1_SSE_WIDTH, + SST_MUL_FACTOR_NONE) + _read_pp_level_info("base_freq_mhz", perf_level.base_freq_mhz, perf_level.level, + SST_PP_INFO_0_OFFSET, SST_PP_P1_SSE_START, SST_PP_P1_SSE_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_pp_level_info("base_freq_avx2_mhz", perf_level.base_freq_avx2_mhz, perf_level.level, + SST_PP_INFO_0_OFFSET, SST_PP_P1_AVX2_START, SST_PP_P1_AVX2_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_pp_level_info("base_freq_avx512_mhz", perf_level.base_freq_avx512_mhz, + perf_level.level, SST_PP_INFO_0_OFFSET, SST_PP_P1_AVX512_START, + SST_PP_P1_AVX512_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("base_freq_amx_mhz", perf_level.base_freq_amx_mhz, perf_level.level, + SST_PP_INFO_0_OFFSET, SST_PP_P1_AMX_START, SST_PP_P1_AMX_WIDTH, + SST_MUL_FACTOR_FREQ) + + _read_pp_level_info("thermal_design_power_w", perf_level.thermal_design_power_w, + perf_level.level, SST_PP_INFO_1_OFFSET, SST_PP_TDP_START, + SST_PP_TDP_WIDTH, SST_MUL_FACTOR_NONE) + perf_level.thermal_design_power_w /= 8; /* units are in 1/8th watt */ + _read_pp_level_info("tjunction_max_c", perf_level.tjunction_max_c, perf_level.level, + SST_PP_INFO_1_OFFSET, SST_PP_T_PROCHOT_START, SST_PP_T_PROCHOT_WIDTH, + SST_MUL_FACTOR_NONE) + _read_pp_level_info("max_memory_freq_mhz", perf_level.max_memory_freq_mhz, + perf_level.level, SST_PP_INFO_1_OFFSET, SST_PP_MAX_MEMORY_FREQ_START, + SST_PP_MAX_MEMORY_FREQ_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("cooling_type", perf_level.cooling_type, perf_level.level, + SST_PP_INFO_1_OFFSET, SST_PP_COOLING_TYPE_START, + SST_PP_COOLING_TYPE_WIDTH, SST_MUL_FACTOR_NONE) + + for (i = 0; i < TRL_MAX_LEVELS; ++i) { + for (j = 0; j < TRL_MAX_BUCKETS; ++j) + _read_pp_level_info("trl*_bucket*_freq_mhz", + perf_level.trl_freq_mhz[i][j], perf_level.level, + SST_PP_INFO_4_OFFSET + (i * SST_PP_TRL_0_RATIO_0_WIDTH), + j * SST_PP_TRL_0_RATIO_0_WIDTH, + SST_PP_TRL_0_RATIO_0_WIDTH, + SST_MUL_FACTOR_FREQ); + } + + for (i = 0; i < TRL_MAX_BUCKETS; ++i) + _read_pp_level_info("bucket*_core_count", perf_level.bucket_core_counts[i], + perf_level.level, SST_PP_INFO_10_OFFSET, + SST_PP_TRL_CORES_BUCKET_0_WIDTH * i, + SST_PP_TRL_CORES_BUCKET_0_WIDTH, SST_MUL_FACTOR_NONE) + + perf_level.max_buckets = TRL_MAX_BUCKETS; + perf_level.max_trl_levels = TRL_MAX_LEVELS; + + _read_pp_level_info("p0_freq_mhz", perf_level.p0_freq_mhz, perf_level.level, + SST_PP_INFO_11_OFFSET, SST_PP_CORE_RATIO_P0_START, + SST_PP_CORE_RATIO_P0_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("p1_freq_mhz", perf_level.p1_freq_mhz, perf_level.level, + SST_PP_INFO_11_OFFSET, SST_PP_CORE_RATIO_P1_START, + SST_PP_CORE_RATIO_P1_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("pn_freq_mhz", perf_level.pn_freq_mhz, perf_level.level, + SST_PP_INFO_11_OFFSET, SST_PP_CORE_RATIO_PN_START, + SST_PP_CORE_RATIO_PN_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("pm_freq_mhz", perf_level.pm_freq_mhz, perf_level.level, + SST_PP_INFO_11_OFFSET, SST_PP_CORE_RATIO_PM_START, + SST_PP_CORE_RATIO_PM_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("p0_fabric_freq_mhz", perf_level.p0_fabric_freq_mhz, + perf_level.level, SST_PP_INFO_11_OFFSET, + SST_PP_CORE_RATIO_P0_FABRIC_START, + SST_PP_CORE_RATIO_P0_FABRIC_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("p1_fabric_freq_mhz", perf_level.p1_fabric_freq_mhz, + perf_level.level, SST_PP_INFO_11_OFFSET, + SST_PP_CORE_RATIO_P1_FABRIC_START, + SST_PP_CORE_RATIO_P1_FABRIC_WIDTH, SST_MUL_FACTOR_FREQ) + _read_pp_level_info("pm_fabric_freq_mhz", perf_level.pm_fabric_freq_mhz, + perf_level.level, SST_PP_INFO_11_OFFSET, + SST_PP_CORE_RATIO_PM_FABRIC_START, + SST_PP_CORE_RATIO_PM_FABRIC_WIDTH, SST_MUL_FACTOR_FREQ) + + if (copy_to_user(argp, &perf_level, sizeof(perf_level))) + return -EFAULT; + + return 0; +} + +#define SST_PP_FUSED_CORE_COUNT_START 0 +#define SST_PP_FUSED_CORE_COUNT_WIDTH 8 + +#define SST_PP_RSLVD_CORE_COUNT_START 8 +#define SST_PP_RSLVD_CORE_COUNT_WIDTH 8 + +#define SST_PP_RSLVD_CORE_MASK_START 0 +#define SST_PP_RSLVD_CORE_MASK_WIDTH 64 + +static int isst_if_get_perf_level_mask(void __user *argp) +{ + static struct isst_perf_level_cpu_mask cpumask; + struct tpmi_per_power_domain_info *power_domain_info; + u64 mask; + + if (copy_from_user(&cpumask, argp, sizeof(cpumask))) + return -EFAULT; + + power_domain_info = get_instance(cpumask.socket_id, cpumask.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + _read_pp_level_info("mask", mask, cpumask.level, SST_PP_INFO_2_OFFSET, + SST_PP_RSLVD_CORE_MASK_START, SST_PP_RSLVD_CORE_MASK_WIDTH, + SST_MUL_FACTOR_NONE) + + cpumask.mask = mask; + + if (!cpumask.punit_cpu_map) + return -EOPNOTSUPP; + + if (copy_to_user(argp, &cpumask, sizeof(cpumask))) + return -EFAULT; + + return 0; +} + +#define SST_BF_INFO_0_OFFSET 0 +#define SST_BF_INFO_1_OFFSET 8 + +#define SST_BF_P1_HIGH_START 13 +#define SST_BF_P1_HIGH_WIDTH 8 + +#define SST_BF_P1_LOW_START 21 +#define SST_BF_P1_LOW_WIDTH 8 + +#define SST_BF_T_PROHOT_START 38 +#define SST_BF_T_PROHOT_WIDTH 8 + +#define SST_BF_TDP_START 46 +#define SST_BF_TDP_WIDTH 15 + +static int isst_if_get_base_freq_info(void __user *argp) +{ + static struct isst_base_freq_info base_freq; + struct tpmi_per_power_domain_info *power_domain_info; + + if (copy_from_user(&base_freq, argp, sizeof(base_freq))) + return -EFAULT; + + power_domain_info = get_instance(base_freq.socket_id, base_freq.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (base_freq.level > power_domain_info->max_level) + return -EINVAL; + + _read_bf_level_info("p1_high", base_freq.high_base_freq_mhz, base_freq.level, + SST_BF_INFO_0_OFFSET, SST_BF_P1_HIGH_START, SST_BF_P1_HIGH_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_bf_level_info("p1_low", base_freq.low_base_freq_mhz, base_freq.level, + SST_BF_INFO_0_OFFSET, SST_BF_P1_LOW_START, SST_BF_P1_LOW_WIDTH, + SST_MUL_FACTOR_FREQ) + _read_bf_level_info("BF-TJ", base_freq.tjunction_max_c, base_freq.level, + SST_BF_INFO_0_OFFSET, SST_BF_T_PROHOT_START, SST_BF_T_PROHOT_WIDTH, + SST_MUL_FACTOR_NONE) + _read_bf_level_info("BF-tdp", base_freq.thermal_design_power_w, base_freq.level, + SST_BF_INFO_0_OFFSET, SST_BF_TDP_START, SST_BF_TDP_WIDTH, + SST_MUL_FACTOR_NONE) + base_freq.thermal_design_power_w /= 8; /*unit = 1/8th watt*/ + + if (copy_to_user(argp, &base_freq, sizeof(base_freq))) + return -EFAULT; + + return 0; +} + +#define P1_HI_CORE_MASK_START 0 +#define P1_HI_CORE_MASK_WIDTH 64 + +static int isst_if_get_base_freq_mask(void __user *argp) +{ + static struct isst_perf_level_cpu_mask cpumask; + struct tpmi_per_power_domain_info *power_domain_info; + u64 mask; + + if (copy_from_user(&cpumask, argp, sizeof(cpumask))) + return -EFAULT; + + power_domain_info = get_instance(cpumask.socket_id, cpumask.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + _read_bf_level_info("BF-cpumask", mask, cpumask.level, SST_BF_INFO_1_OFFSET, + P1_HI_CORE_MASK_START, P1_HI_CORE_MASK_WIDTH, + SST_MUL_FACTOR_NONE) + + cpumask.mask = mask; + + if (!cpumask.punit_cpu_map) + return -EOPNOTSUPP; + + if (copy_to_user(argp, &cpumask, sizeof(cpumask))) + return -EFAULT; + + return 0; +} + +static int isst_if_get_tpmi_instance_count(void __user *argp) +{ + struct isst_tpmi_instance_count tpmi_inst; + struct tpmi_sst_struct *sst_inst; + int i; + + if (copy_from_user(&tpmi_inst, argp, sizeof(tpmi_inst))) + return -EFAULT; + + if (tpmi_inst.socket_id >= topology_max_packages()) + return -EINVAL; + + tpmi_inst.count = isst_common.sst_inst[tpmi_inst.socket_id]->number_of_power_domains; + + sst_inst = isst_common.sst_inst[tpmi_inst.socket_id]; + tpmi_inst.valid_mask = 0; + for (i = 0; i < sst_inst->number_of_power_domains; ++i) { + struct tpmi_per_power_domain_info *pd_info; + + pd_info = &sst_inst->power_domain_info[i]; + if (pd_info->sst_base) + tpmi_inst.valid_mask |= BIT(i); + } + + if (copy_to_user(argp, &tpmi_inst, sizeof(tpmi_inst))) + return -EFAULT; + + return 0; +} + +#define SST_TF_INFO_0_OFFSET 0 +#define SST_TF_INFO_1_OFFSET 8 +#define SST_TF_INFO_2_OFFSET 16 + +#define SST_TF_MAX_LP_CLIP_RATIOS TRL_MAX_LEVELS + +#define SST_TF_LP_CLIP_RATIO_0_START 16 +#define SST_TF_LP_CLIP_RATIO_0_WIDTH 8 + +#define SST_TF_RATIO_0_START 0 +#define SST_TF_RATIO_0_WIDTH 8 + +#define SST_TF_NUM_CORE_0_START 0 +#define SST_TF_NUM_CORE_0_WIDTH 8 + +static int isst_if_get_turbo_freq_info(void __user *argp) +{ + static struct isst_turbo_freq_info turbo_freq; + struct tpmi_per_power_domain_info *power_domain_info; + int i, j; + + if (copy_from_user(&turbo_freq, argp, sizeof(turbo_freq))) + return -EFAULT; + + power_domain_info = get_instance(turbo_freq.socket_id, turbo_freq.power_domain_id); + if (!power_domain_info) + return -EINVAL; + + if (turbo_freq.level > power_domain_info->max_level) + return -EINVAL; + + turbo_freq.max_buckets = TRL_MAX_BUCKETS; + turbo_freq.max_trl_levels = TRL_MAX_LEVELS; + turbo_freq.max_clip_freqs = SST_TF_MAX_LP_CLIP_RATIOS; + + for (i = 0; i < turbo_freq.max_clip_freqs; ++i) + _read_tf_level_info("lp_clip*", turbo_freq.lp_clip_freq_mhz[i], + turbo_freq.level, SST_TF_INFO_0_OFFSET, + SST_TF_LP_CLIP_RATIO_0_START + + (i * SST_TF_LP_CLIP_RATIO_0_WIDTH), + SST_TF_LP_CLIP_RATIO_0_WIDTH, SST_MUL_FACTOR_FREQ) + + for (i = 0; i < TRL_MAX_LEVELS; ++i) { + for (j = 0; j < TRL_MAX_BUCKETS; ++j) + _read_tf_level_info("cydn*_bucket_*_trl", + turbo_freq.trl_freq_mhz[i][j], turbo_freq.level, + SST_TF_INFO_2_OFFSET + (i * SST_TF_RATIO_0_WIDTH), + j * SST_TF_RATIO_0_WIDTH, SST_TF_RATIO_0_WIDTH, + SST_MUL_FACTOR_FREQ) + } + + for (i = 0; i < TRL_MAX_BUCKETS; ++i) + _read_tf_level_info("bucket_*_core_count", turbo_freq.bucket_core_counts[i], + turbo_freq.level, SST_TF_INFO_1_OFFSET, + SST_TF_NUM_CORE_0_WIDTH * i, SST_TF_NUM_CORE_0_WIDTH, + SST_MUL_FACTOR_NONE) + + if (copy_to_user(argp, &turbo_freq, sizeof(turbo_freq))) + return -EFAULT; + + return 0; +} + +static long isst_if_def_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + long ret = -ENOTTY; + + mutex_lock(&isst_tpmi_dev_lock); + switch (cmd) { + case ISST_IF_COUNT_TPMI_INSTANCES: + ret = isst_if_get_tpmi_instance_count(argp); + break; + case ISST_IF_CORE_POWER_STATE: + ret = isst_if_core_power_state(argp); + break; + case ISST_IF_CLOS_PARAM: + ret = isst_if_clos_param(argp); + break; + case ISST_IF_CLOS_ASSOC: + ret = isst_if_clos_assoc(argp); + break; + case ISST_IF_PERF_LEVELS: + ret = isst_if_get_perf_level(argp); + break; + case ISST_IF_PERF_SET_LEVEL: + ret = isst_if_set_perf_level(argp); + break; + case ISST_IF_PERF_SET_FEATURE: + ret = isst_if_set_perf_feature(argp); + break; + case ISST_IF_GET_PERF_LEVEL_INFO: + ret = isst_if_get_perf_level_info(argp); + break; + case ISST_IF_GET_PERF_LEVEL_CPU_MASK: + ret = isst_if_get_perf_level_mask(argp); + break; + case ISST_IF_GET_BASE_FREQ_INFO: + ret = isst_if_get_base_freq_info(argp); + break; + case ISST_IF_GET_BASE_FREQ_CPU_MASK: + ret = isst_if_get_base_freq_mask(argp); + break; + case ISST_IF_GET_TURBO_FREQ_INFO: + ret = isst_if_get_turbo_freq_info(argp); + break; + default: + break; + } + mutex_unlock(&isst_tpmi_dev_lock); + + return ret; +} + +#define TPMI_SST_AUTO_SUSPEND_DELAY_MS 2000 + +int tpmi_sst_dev_add(struct auxiliary_device *auxdev) +{ + struct intel_tpmi_plat_info *plat_info; + struct tpmi_sst_struct *tpmi_sst; + int i, ret, pkg = 0, inst = 0; + int num_resources; + + plat_info = tpmi_get_platform_data(auxdev); + if (!plat_info) { + dev_err(&auxdev->dev, "No platform info\n"); + return -EINVAL; + } + + pkg = plat_info->package_id; + if (pkg >= topology_max_packages()) { + dev_err(&auxdev->dev, "Invalid package id :%x\n", pkg); + return -EINVAL; + } + + if (isst_common.sst_inst[pkg]) + return -EEXIST; + + num_resources = tpmi_get_resource_count(auxdev); + + if (!num_resources) + return -EINVAL; + + tpmi_sst = devm_kzalloc(&auxdev->dev, sizeof(*tpmi_sst), GFP_KERNEL); + if (!tpmi_sst) + return -ENOMEM; + + tpmi_sst->power_domain_info = devm_kcalloc(&auxdev->dev, num_resources, + sizeof(*tpmi_sst->power_domain_info), + GFP_KERNEL); + if (!tpmi_sst->power_domain_info) + return -ENOMEM; + + tpmi_sst->number_of_power_domains = num_resources; + + for (i = 0; i < num_resources; ++i) { + struct resource *res; + + res = tpmi_get_resource_at_index(auxdev, i); + if (!res) { + tpmi_sst->power_domain_info[i].sst_base = NULL; + continue; + } + + tpmi_sst->power_domain_info[i].package_id = pkg; + tpmi_sst->power_domain_info[i].power_domain_id = i; + tpmi_sst->power_domain_info[i].auxdev = auxdev; + tpmi_sst->power_domain_info[i].sst_base = devm_ioremap_resource(&auxdev->dev, res); + if (IS_ERR(tpmi_sst->power_domain_info[i].sst_base)) + return PTR_ERR(tpmi_sst->power_domain_info[i].sst_base); + + ret = sst_main(auxdev, &tpmi_sst->power_domain_info[i]); + if (ret) { + devm_iounmap(&auxdev->dev, tpmi_sst->power_domain_info[i].sst_base); + tpmi_sst->power_domain_info[i].sst_base = NULL; + continue; + } + + ++inst; + } + + if (!inst) + return -ENODEV; + + tpmi_sst->package_id = pkg; + auxiliary_set_drvdata(auxdev, tpmi_sst); + + mutex_lock(&isst_tpmi_dev_lock); + if (isst_common.max_index < pkg) + isst_common.max_index = pkg; + isst_common.sst_inst[pkg] = tpmi_sst; + mutex_unlock(&isst_tpmi_dev_lock); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_add, INTEL_TPMI_SST); + +void tpmi_sst_dev_remove(struct auxiliary_device *auxdev) +{ + struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); + + mutex_lock(&isst_tpmi_dev_lock); + isst_common.sst_inst[tpmi_sst->package_id] = NULL; + mutex_unlock(&isst_tpmi_dev_lock); +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_remove, INTEL_TPMI_SST); + +void tpmi_sst_dev_suspend(struct auxiliary_device *auxdev) +{ + struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); + struct tpmi_per_power_domain_info *power_domain_info = tpmi_sst->power_domain_info; + void __iomem *cp_base; + + cp_base = power_domain_info->sst_base + power_domain_info->sst_header.cp_offset; + power_domain_info->saved_sst_cp_control = readq(cp_base + SST_CP_CONTROL_OFFSET); + + memcpy_fromio(power_domain_info->saved_clos_configs, cp_base + SST_CLOS_CONFIG_0_OFFSET, + sizeof(power_domain_info->saved_clos_configs)); + + memcpy_fromio(power_domain_info->saved_clos_assocs, cp_base + SST_CLOS_ASSOC_0_OFFSET, + sizeof(power_domain_info->saved_clos_assocs)); + + power_domain_info->saved_pp_control = readq(power_domain_info->sst_base + + power_domain_info->sst_header.pp_offset + + SST_PP_CONTROL_OFFSET); +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_suspend, INTEL_TPMI_SST); + +void tpmi_sst_dev_resume(struct auxiliary_device *auxdev) +{ + struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); + struct tpmi_per_power_domain_info *power_domain_info = tpmi_sst->power_domain_info; + void __iomem *cp_base; + + cp_base = power_domain_info->sst_base + power_domain_info->sst_header.cp_offset; + writeq(power_domain_info->saved_sst_cp_control, cp_base + SST_CP_CONTROL_OFFSET); + + memcpy_toio(cp_base + SST_CLOS_CONFIG_0_OFFSET, power_domain_info->saved_clos_configs, + sizeof(power_domain_info->saved_clos_configs)); + + memcpy_toio(cp_base + SST_CLOS_ASSOC_0_OFFSET, power_domain_info->saved_clos_assocs, + sizeof(power_domain_info->saved_clos_assocs)); + + writeq(power_domain_info->saved_pp_control, power_domain_info->sst_base + + power_domain_info->sst_header.pp_offset + SST_PP_CONTROL_OFFSET); +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_resume, INTEL_TPMI_SST); + +#define ISST_TPMI_API_VERSION 0x02 + +int tpmi_sst_init(void) +{ + struct isst_if_cmd_cb cb; + int ret = 0; + + mutex_lock(&isst_tpmi_dev_lock); + + if (isst_core_usage_count) { + ++isst_core_usage_count; + goto init_done; + } + + isst_common.sst_inst = kcalloc(topology_max_packages(), + sizeof(*isst_common.sst_inst), + GFP_KERNEL); + if (!isst_common.sst_inst) { + ret = -ENOMEM; + goto init_done; + } + + memset(&cb, 0, sizeof(cb)); + cb.cmd_size = sizeof(struct isst_if_io_reg); + cb.offset = offsetof(struct isst_if_io_regs, io_reg); + cb.cmd_callback = NULL; + cb.api_version = ISST_TPMI_API_VERSION; + cb.def_ioctl = isst_if_def_ioctl; + cb.owner = THIS_MODULE; + ret = isst_if_cdev_register(ISST_IF_DEV_TPMI, &cb); + if (ret) + kfree(isst_common.sst_inst); +init_done: + mutex_unlock(&isst_tpmi_dev_lock); + return ret; +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_init, INTEL_TPMI_SST); + +void tpmi_sst_exit(void) +{ + mutex_lock(&isst_tpmi_dev_lock); + if (isst_core_usage_count) + --isst_core_usage_count; + + if (!isst_core_usage_count) { + isst_if_cdev_unregister(ISST_IF_DEV_TPMI); + kfree(isst_common.sst_inst); + } + mutex_unlock(&isst_tpmi_dev_lock); +} +EXPORT_SYMBOL_NS_GPL(tpmi_sst_exit, INTEL_TPMI_SST); + +MODULE_IMPORT_NS(INTEL_TPMI); +MODULE_IMPORT_NS(INTEL_TPMI_POWER_DOMAIN); + +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.h b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.h new file mode 100644 index 000000000000..900b483703f9 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Intel Speed Select Interface: Drivers Internal defines + * Copyright (c) 2023, Intel Corporation. + * All rights reserved. + * + */ + +#ifndef _ISST_TPMI_CORE_H +#define _ISST_TPMI_CORE_H + +int tpmi_sst_init(void); +void tpmi_sst_exit(void); +int tpmi_sst_dev_add(struct auxiliary_device *auxdev); +void tpmi_sst_dev_remove(struct auxiliary_device *auxdev); +void tpmi_sst_dev_suspend(struct auxiliary_device *auxdev); +void tpmi_sst_dev_resume(struct auxiliary_device *auxdev); +#endif diff --git a/drivers/platform/x86/intel/telemetry/pltdrv.c b/drivers/platform/x86/intel/telemetry/pltdrv.c index 405dea87de6b..06311d0e9451 100644 --- a/drivers/platform/x86/intel/telemetry/pltdrv.c +++ b/drivers/platform/x86/intel/telemetry/pltdrv.c @@ -1156,15 +1156,14 @@ out: return ret; } -static int telemetry_pltdrv_remove(struct platform_device *pdev) +static void telemetry_pltdrv_remove(struct platform_device *pdev) { telemetry_clear_pltdata(); - return 0; } static struct platform_driver telemetry_soc_driver = { .probe = telemetry_pltdrv_probe, - .remove = telemetry_pltdrv_remove, + .remove_new = telemetry_pltdrv_remove, .driver = { .name = DRIVER_NAME, }, diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c index 00ac7e381441..32e2515ee366 100644 --- a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c +++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c @@ -204,6 +204,13 @@ static const struct x86_cpu_id intel_uncore_cpu_ids[] = { X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, NULL), X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, NULL), X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, NULL), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, NULL), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S, NULL), + X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L, NULL), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_uncore_cpu_ids); diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index c5e4e35c8d20..6fa1735ad7a4 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -325,18 +325,12 @@ static int intel_vbtn_probe(struct platform_device *device) return 0; } -static int intel_vbtn_remove(struct platform_device *device) +static void intel_vbtn_remove(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); device_init_wakeup(&device->dev, false); acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler); - - /* - * Even if we failed to shut off the event stream, we can still - * safely detach from the device. - */ - return 0; } static int intel_vbtn_pm_prepare(struct device *dev) @@ -377,7 +371,7 @@ static struct platform_driver intel_vbtn_pl_driver = { .pm = &intel_vbtn_pm_ops, }, .probe = intel_vbtn_probe, - .remove = intel_vbtn_remove, + .remove_new = intel_vbtn_remove, }; static acpi_status __init diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c index 2311c16cb975..c1f9e4471b28 100644 --- a/drivers/platform/x86/intel/vsec.c +++ b/drivers/platform/x86/intel/vsec.c @@ -67,14 +67,6 @@ enum intel_vsec_id { VSEC_ID_TPMI = 66, }; -static enum intel_vsec_id intel_vsec_allow_list[] = { - VSEC_ID_TELEMETRY, - VSEC_ID_WATCHER, - VSEC_ID_CRASHLOG, - VSEC_ID_SDSI, - VSEC_ID_TPMI, -}; - static const char *intel_vsec_name(enum intel_vsec_id id) { switch (id) { @@ -98,26 +90,19 @@ static const char *intel_vsec_name(enum intel_vsec_id id) } } -static bool intel_vsec_allowed(u16 id) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(intel_vsec_allow_list); i++) - if (intel_vsec_allow_list[i] == id) - return true; - - return false; -} - -static bool intel_vsec_disabled(u16 id, unsigned long quirks) +static bool intel_vsec_supported(u16 id, unsigned long caps) { switch (id) { + case VSEC_ID_TELEMETRY: + return !!(caps & VSEC_CAP_TELEMETRY); case VSEC_ID_WATCHER: - return !!(quirks & VSEC_QUIRK_NO_WATCHER); - + return !!(caps & VSEC_CAP_WATCHER); case VSEC_ID_CRASHLOG: - return !!(quirks & VSEC_QUIRK_NO_CRASHLOG); - + return !!(caps & VSEC_CAP_CRASHLOG); + case VSEC_ID_SDSI: + return !!(caps & VSEC_CAP_SDSI); + case VSEC_ID_TPMI: + return !!(caps & VSEC_CAP_TPMI); default: return false; } @@ -169,11 +154,7 @@ int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent, ret = auxiliary_device_init(auxdev); if (ret < 0) { - mutex_lock(&vsec_ida_lock); - ida_free(intel_vsec_dev->ida, auxdev->id); - mutex_unlock(&vsec_ida_lock); - kfree(intel_vsec_dev->resource); - kfree(intel_vsec_dev); + intel_vsec_dev_release(&auxdev->dev); return ret; } @@ -206,7 +187,7 @@ static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he unsigned long quirks = info->quirks; int i; - if (!intel_vsec_allowed(header->id) || intel_vsec_disabled(header->id, quirks)) + if (!intel_vsec_supported(header->id, info->caps)) return -EINVAL; if (!header->num_entries) { @@ -261,14 +242,14 @@ static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he static bool intel_vsec_walk_header(struct pci_dev *pdev, struct intel_vsec_platform_info *info) { - struct intel_vsec_header **header = info->capabilities; + struct intel_vsec_header **header = info->headers; bool have_devices = false; int ret; for ( ; *header; header++) { ret = intel_vsec_add_dev(pdev, *header, info); if (ret) - dev_info(&pdev->dev, "Could not add device for DVSEC id %d\n", + dev_info(&pdev->dev, "Could not add device for VSEC id %d\n", (*header)->id); else have_devices = true; @@ -403,14 +384,8 @@ static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id return 0; } -/* TGL info */ -static const struct intel_vsec_platform_info tgl_info = { - .quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG | - VSEC_QUIRK_TABLE_SHIFT | VSEC_QUIRK_EARLY_HW, -}; - /* DG1 info */ -static struct intel_vsec_header dg1_telemetry = { +static struct intel_vsec_header dg1_header = { .length = 0x10, .id = 2, .num_entries = 1, @@ -419,19 +394,31 @@ static struct intel_vsec_header dg1_telemetry = { .offset = 0x466000, }; -static struct intel_vsec_header *dg1_capabilities[] = { - &dg1_telemetry, +static struct intel_vsec_header *dg1_headers[] = { + &dg1_header, NULL }; static const struct intel_vsec_platform_info dg1_info = { - .capabilities = dg1_capabilities, + .caps = VSEC_CAP_TELEMETRY, + .headers = dg1_headers, .quirks = VSEC_QUIRK_NO_DVSEC | VSEC_QUIRK_EARLY_HW, }; /* MTL info */ static const struct intel_vsec_platform_info mtl_info = { - .quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG, + .caps = VSEC_CAP_TELEMETRY, +}; + +/* OOBMSM info */ +static const struct intel_vsec_platform_info oobmsm_info = { + .caps = VSEC_CAP_TELEMETRY | VSEC_CAP_SDSI | VSEC_CAP_TPMI, +}; + +/* TGL info */ +static const struct intel_vsec_platform_info tgl_info = { + .caps = VSEC_CAP_TELEMETRY, + .quirks = VSEC_QUIRK_TABLE_SHIFT | VSEC_QUIRK_EARLY_HW, }; #define PCI_DEVICE_ID_INTEL_VSEC_ADL 0x467d @@ -446,7 +433,7 @@ static const struct pci_device_id intel_vsec_pci_ids[] = { { PCI_DEVICE_DATA(INTEL, VSEC_DG1, &dg1_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_MTL_M, &mtl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_MTL_S, &mtl_info) }, - { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &(struct intel_vsec_platform_info) {}) }, + { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &oobmsm_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_RPL, &tgl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_TGL, &tgl_info) }, { } diff --git a/drivers/platform/x86/intel/vsec.h b/drivers/platform/x86/intel/vsec.h index ae8fe92c5595..0fd042c171ba 100644 --- a/drivers/platform/x86/intel/vsec.h +++ b/drivers/platform/x86/intel/vsec.h @@ -5,6 +5,12 @@ #include <linux/auxiliary_bus.h> #include <linux/bits.h> +#define VSEC_CAP_TELEMETRY BIT(0) +#define VSEC_CAP_WATCHER BIT(1) +#define VSEC_CAP_CRASHLOG BIT(2) +#define VSEC_CAP_SDSI BIT(3) +#define VSEC_CAP_TPMI BIT(4) + struct pci_dev; struct resource; @@ -27,7 +33,8 @@ enum intel_vsec_quirks { /* Platform specific data */ struct intel_vsec_platform_info { - struct intel_vsec_header **capabilities; + struct intel_vsec_header **headers; + unsigned long caps; unsigned long quirks; }; diff --git a/drivers/platform/x86/lenovo-ymc.c b/drivers/platform/x86/lenovo-ymc.c new file mode 100644 index 000000000000..41676188b373 --- /dev/null +++ b/drivers/platform/x86/lenovo-ymc.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * lenovo-ymc.c - Lenovo Yoga Mode Control driver + * + * Copyright © 2022 Gergo Koteles <soyer@irl.hu> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/wmi.h> +#include "ideapad-laptop.h" + +#define LENOVO_YMC_EVENT_GUID "06129D99-6083-4164-81AD-F092F9D773A6" +#define LENOVO_YMC_QUERY_GUID "09B0EE6E-C3FD-4243-8DA1-7911FF80BB8C" + +#define LENOVO_YMC_QUERY_INSTANCE 0 +#define LENOVO_YMC_QUERY_METHOD 0x01 + +static bool ec_trigger __read_mostly; +module_param(ec_trigger, bool, 0444); +MODULE_PARM_DESC(ec_trigger, "Enable EC triggering work-around to force emitting tablet mode events"); + +static const struct dmi_system_id ec_trigger_quirk_dmi_table[] = { + { + /* Lenovo Yoga 7 14ARB7 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "82QF"), + }, + }, + { } +}; + +struct lenovo_ymc_private { + struct input_dev *input_dev; + struct acpi_device *ec_acpi_dev; +}; + +static void lenovo_ymc_trigger_ec(struct wmi_device *wdev, struct lenovo_ymc_private *priv) +{ + int err; + + if (!priv->ec_acpi_dev) + return; + + err = write_ec_cmd(priv->ec_acpi_dev->handle, VPCCMD_W_YMC, 1); + if (err) + dev_warn(&wdev->dev, "Could not write YMC: %d\n", err); +} + +static const struct key_entry lenovo_ymc_keymap[] = { + /* Laptop */ + { KE_SW, 0x01, { .sw = { SW_TABLET_MODE, 0 } } }, + /* Tablet */ + { KE_SW, 0x02, { .sw = { SW_TABLET_MODE, 1 } } }, + /* Drawing Board */ + { KE_SW, 0x03, { .sw = { SW_TABLET_MODE, 1 } } }, + /* Tent */ + { KE_SW, 0x04, { .sw = { SW_TABLET_MODE, 1 } } }, + { KE_END }, +}; + +static void lenovo_ymc_notify(struct wmi_device *wdev, union acpi_object *data) +{ + struct lenovo_ymc_private *priv = dev_get_drvdata(&wdev->dev); + u32 input_val = 0; + struct acpi_buffer input = { sizeof(input_val), &input_val }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + int code; + + status = wmi_evaluate_method(LENOVO_YMC_QUERY_GUID, + LENOVO_YMC_QUERY_INSTANCE, + LENOVO_YMC_QUERY_METHOD, + &input, &output); + + if (ACPI_FAILURE(status)) { + dev_warn(&wdev->dev, + "Failed to evaluate query method: %s\n", + acpi_format_exception(status)); + return; + } + + obj = output.pointer; + + if (obj->type != ACPI_TYPE_INTEGER) { + dev_warn(&wdev->dev, + "WMI event data is not an integer\n"); + goto free_obj; + } + code = obj->integer.value; + + if (!sparse_keymap_report_event(priv->input_dev, code, 1, true)) + dev_warn(&wdev->dev, "Unknown key %d pressed\n", code); + +free_obj: + kfree(obj); + lenovo_ymc_trigger_ec(wdev, priv); +} + +static void acpi_dev_put_helper(void *p) { acpi_dev_put(p); } + +static int lenovo_ymc_probe(struct wmi_device *wdev, const void *ctx) +{ + struct lenovo_ymc_private *priv; + struct input_dev *input_dev; + int err; + + ec_trigger |= dmi_check_system(ec_trigger_quirk_dmi_table); + + priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (ec_trigger) { + pr_debug("Lenovo YMC enable EC triggering.\n"); + priv->ec_acpi_dev = acpi_dev_get_first_match_dev("VPC2004", NULL, -1); + + if (!priv->ec_acpi_dev) { + dev_err(&wdev->dev, "Could not find EC ACPI device.\n"); + return -ENODEV; + } + err = devm_add_action_or_reset(&wdev->dev, + acpi_dev_put_helper, priv->ec_acpi_dev); + if (err) { + dev_err(&wdev->dev, + "Could not clean up EC ACPI device: %d\n", err); + return err; + } + } + + input_dev = devm_input_allocate_device(&wdev->dev); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "Lenovo Yoga Tablet Mode Control switch"; + input_dev->phys = LENOVO_YMC_EVENT_GUID "/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &wdev->dev; + err = sparse_keymap_setup(input_dev, lenovo_ymc_keymap, NULL); + if (err) { + dev_err(&wdev->dev, + "Could not set up input device keymap: %d\n", err); + return err; + } + + err = input_register_device(input_dev); + if (err) { + dev_err(&wdev->dev, + "Could not register input device: %d\n", err); + return err; + } + + priv->input_dev = input_dev; + dev_set_drvdata(&wdev->dev, priv); + + /* Report the state for the first time on probe */ + lenovo_ymc_trigger_ec(wdev, priv); + lenovo_ymc_notify(wdev, NULL); + return 0; +} + +static const struct wmi_device_id lenovo_ymc_wmi_id_table[] = { + { .guid_string = LENOVO_YMC_EVENT_GUID }, + { } +}; +MODULE_DEVICE_TABLE(wmi, lenovo_ymc_wmi_id_table); + +static struct wmi_driver lenovo_ymc_driver = { + .driver = { + .name = "lenovo-ymc", + }, + .id_table = lenovo_ymc_wmi_id_table, + .probe = lenovo_ymc_probe, + .notify = lenovo_ymc_notify, +}; + +module_wmi_driver(lenovo_ymc_driver); + +MODULE_AUTHOR("Gergo Koteles <soyer@irl.hu>"); +MODULE_DESCRIPTION("Lenovo Yoga Mode Control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/msi-ec.c b/drivers/platform/x86/msi-ec.c new file mode 100644 index 000000000000..ff93986e3d35 --- /dev/null +++ b/drivers/platform/x86/msi-ec.c @@ -0,0 +1,897 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* + * msi-ec: MSI laptops' embedded controller driver. + * + * This driver allows various MSI laptops' functionalities to be + * controlled from userspace. + * + * It contains EC memory configurations for different firmware versions + * and exports battery charge thresholds to userspace. + * + * Copyright (C) 2023 Jose Angel Pastrana <japp0005@red.ujaen.es> + * Copyright (C) 2023 Aakash Singh <mail@singhaakash.dev> + * Copyright (C) 2023 Nikita Kravets <teackot@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "msi-ec.h" + +#include <acpi/battery.h> +#include <linux/acpi.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/string.h> + +static const char *const SM_ECO_NAME = "eco"; +static const char *const SM_COMFORT_NAME = "comfort"; +static const char *const SM_SPORT_NAME = "sport"; +static const char *const SM_TURBO_NAME = "turbo"; + +static const char *const FM_AUTO_NAME = "auto"; +static const char *const FM_SILENT_NAME = "silent"; +static const char *const FM_BASIC_NAME = "basic"; +static const char *const FM_ADVANCED_NAME = "advanced"; + +static const char * const ALLOWED_FW_0[] __initconst = { + "14C1EMS1.012", + "14C1EMS1.101", + "14C1EMS1.102", + NULL +}; + +static struct msi_ec_conf CONF0 __initdata = { + .allowed_fw = ALLOWED_FW_0, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xbf, + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = MSI_EC_ADDR_UNKNOWN, // 0xd5 needs testing + }, + .fan_mode = { + .address = 0xf4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_BASIC_NAME, 0x4d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0x71, + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = 0x89, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = 0x89, + }, + .leds = { + .micmute_led_address = 0x2b, + .mute_led_address = 0x2c, + .bit = 2, + }, + .kbd_bl = { + .bl_mode_address = 0x2c, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = 0xf3, + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_1[] __initconst = { + "17F2EMS1.103", + "17F2EMS1.104", + "17F2EMS1.106", + "17F2EMS1.107", + NULL +}; + +static struct msi_ec_conf CONF1 __initdata = { + .allowed_fw = ALLOWED_FW_1, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xbf, + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + { SM_TURBO_NAME, 0xc4 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = MSI_EC_ADDR_UNKNOWN, + }, + .fan_mode = { + .address = 0xf4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_BASIC_NAME, 0x4d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0x71, + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = 0x89, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = 0x89, + }, + .leds = { + .micmute_led_address = 0x2b, + .mute_led_address = 0x2c, + .bit = 2, + }, + .kbd_bl = { + .bl_mode_address = 0x2c, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = 0xf3, + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_2[] __initconst = { + "1552EMS1.118", + NULL +}; + +static struct msi_ec_conf CONF2 __initdata = { + .allowed_fw = ALLOWED_FW_2, + .charge_control = { + .address = 0xd7, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xe8, + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = 0xeb, + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xd4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_BASIC_NAME, 0x4d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0x71, + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = 0x89, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = 0x89, + }, + .leds = { + .micmute_led_address = 0x2c, + .mute_led_address = 0x2d, + .bit = 1, + }, + .kbd_bl = { + .bl_mode_address = 0x2c, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = 0xd3, + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_3[] __initconst = { + "1592EMS1.111", + "E1592IMS.10C", + NULL +}; + +static struct msi_ec_conf CONF3 __initdata = { + .allowed_fw = ALLOWED_FW_3, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xe8, + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xd2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = 0xeb, + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xd4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_BASIC_NAME, 0x4d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0xc9, + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = 0x89, // ? + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = 0x89, + }, + .leds = { + .micmute_led_address = 0x2b, + .mute_led_address = 0x2c, + .bit = 1, + }, + .kbd_bl = { + .bl_mode_address = 0x2c, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = 0xd3, + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_4[] __initconst = { + "16V4EMS1.114", + NULL +}; + +static struct msi_ec_conf CONF4 __initdata = { + .allowed_fw = ALLOWED_FW_4, + .charge_control = { + .address = 0xd7, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { + .address = MSI_EC_ADDR_UNKNOWN, // supported, but unknown + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xd2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { // may be supported, but address is unknown + .address = MSI_EC_ADDR_UNKNOWN, + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xd4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, // needs testing + .rt_fan_speed_address = 0x71, // needs testing + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = MSI_EC_ADDR_UNKNOWN, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = MSI_EC_ADDR_UNKNOWN, + }, + .leds = { + .micmute_led_address = MSI_EC_ADDR_UNKNOWN, + .mute_led_address = MSI_EC_ADDR_UNKNOWN, + .bit = 1, + }, + .kbd_bl = { + .bl_mode_address = MSI_EC_ADDR_UNKNOWN, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = MSI_EC_ADDR_UNSUPP, // 0xd3, not functional + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_5[] __initconst = { + "158LEMS1.103", + "158LEMS1.105", + "158LEMS1.106", + NULL +}; + +static struct msi_ec_conf CONF5 __initdata = { + .allowed_fw = ALLOWED_FW_5, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = 0x2f, + .bit = 1, + }, + .fn_super_swap = { // todo: reverse + .address = 0xbf, + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_TURBO_NAME, 0xc4 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { // unsupported? + .address = MSI_EC_ADDR_UNKNOWN, + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xf4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, // needs testing + .rt_fan_speed_address = 0x71, // needs testing + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = MSI_EC_ADDR_UNSUPP, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = MSI_EC_ADDR_UNKNOWN, + .rt_fan_speed_address = MSI_EC_ADDR_UNKNOWN, + }, + .leds = { + .micmute_led_address = 0x2b, + .mute_led_address = 0x2c, + .bit = 2, + }, + .kbd_bl = { + .bl_mode_address = MSI_EC_ADDR_UNKNOWN, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = MSI_EC_ADDR_UNSUPP, // 0xf3, not functional + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_6[] __initconst = { + "1542EMS1.102", + "1542EMS1.104", + NULL +}; + +static struct msi_ec_conf CONF6 __initdata = { + .allowed_fw = ALLOWED_FW_6, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = MSI_EC_ADDR_UNSUPP, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xbf, // todo: reverse + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + { SM_TURBO_NAME, 0xc4 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = 0xd5, + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xf4, + .modes = { + { FM_AUTO_NAME, 0x0d }, + { FM_SILENT_NAME, 0x1d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0xc9, + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = MSI_EC_ADDR_UNSUPP, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = 0x80, + .rt_fan_speed_address = MSI_EC_ADDR_UNKNOWN, + }, + .leds = { + .micmute_led_address = MSI_EC_ADDR_UNSUPP, + .mute_led_address = MSI_EC_ADDR_UNSUPP, + .bit = 2, + }, + .kbd_bl = { + .bl_mode_address = MSI_EC_ADDR_UNKNOWN, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = MSI_EC_ADDR_UNSUPP, // 0xf3, not functional + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static const char * const ALLOWED_FW_7[] __initconst = { + "17FKEMS1.108", + "17FKEMS1.109", + "17FKEMS1.10A", + NULL +}; + +static struct msi_ec_conf CONF7 __initdata = { + .allowed_fw = ALLOWED_FW_7, + .charge_control = { + .address = 0xef, + .offset_start = 0x8a, + .offset_end = 0x80, + .range_min = 0x8a, + .range_max = 0xe4, + }, + .webcam = { + .address = 0x2e, + .block_address = MSI_EC_ADDR_UNSUPP, + .bit = 1, + }, + .fn_super_swap = { + .address = 0xbf, // needs testing + .bit = 4, + }, + .cooler_boost = { + .address = 0x98, + .bit = 7, + }, + .shift_mode = { + .address = 0xf2, + .modes = { + { SM_ECO_NAME, 0xc2 }, + { SM_COMFORT_NAME, 0xc1 }, + { SM_SPORT_NAME, 0xc0 }, + { SM_TURBO_NAME, 0xc4 }, + MSI_EC_MODE_NULL + }, + }, + .super_battery = { + .address = MSI_EC_ADDR_UNKNOWN, // 0xd5 but has its own wet of modes + .mask = 0x0f, + }, + .fan_mode = { + .address = 0xf4, + .modes = { + { FM_AUTO_NAME, 0x0d }, // d may not be relevant + { FM_SILENT_NAME, 0x1d }, + { FM_ADVANCED_NAME, 0x8d }, + MSI_EC_MODE_NULL + }, + }, + .cpu = { + .rt_temp_address = 0x68, + .rt_fan_speed_address = 0xc9, // needs testing + .rt_fan_speed_base_min = 0x19, + .rt_fan_speed_base_max = 0x37, + .bs_fan_speed_address = MSI_EC_ADDR_UNSUPP, + .bs_fan_speed_base_min = 0x00, + .bs_fan_speed_base_max = 0x0f, + }, + .gpu = { + .rt_temp_address = MSI_EC_ADDR_UNKNOWN, + .rt_fan_speed_address = MSI_EC_ADDR_UNKNOWN, + }, + .leds = { + .micmute_led_address = MSI_EC_ADDR_UNSUPP, + .mute_led_address = 0x2c, + .bit = 2, + }, + .kbd_bl = { + .bl_mode_address = MSI_EC_ADDR_UNKNOWN, // ? + .bl_modes = { 0x00, 0x08 }, // ? + .max_mode = 1, // ? + .bl_state_address = 0xf3, + .state_base_value = 0x80, + .max_state = 3, + }, +}; + +static struct msi_ec_conf *CONFIGS[] __initdata = { + &CONF0, + &CONF1, + &CONF2, + &CONF3, + &CONF4, + &CONF5, + &CONF6, + &CONF7, + NULL +}; + +static struct msi_ec_conf conf; // current configuration + +/* + * Helper functions + */ + +static int ec_read_seq(u8 addr, u8 *buf, u8 len) +{ + int result; + + for (u8 i = 0; i < len; i++) { + result = ec_read(addr + i, buf + i); + if (result < 0) + return result; + } + + return 0; +} + +static int ec_get_firmware_version(u8 buf[MSI_EC_FW_VERSION_LENGTH + 1]) +{ + int result; + + memset(buf, 0, MSI_EC_FW_VERSION_LENGTH + 1); + result = ec_read_seq(MSI_EC_FW_VERSION_ADDRESS, + buf, + MSI_EC_FW_VERSION_LENGTH); + if (result < 0) + return result; + + return MSI_EC_FW_VERSION_LENGTH + 1; +} + +/* + * Sysfs power_supply subsystem + */ + +static ssize_t charge_control_threshold_show(u8 offset, + struct device *device, + struct device_attribute *attr, + char *buf) +{ + u8 rdata; + int result; + + result = ec_read(conf.charge_control.address, &rdata); + if (result < 0) + return result; + + return sysfs_emit(buf, "%i\n", rdata - offset); +} + +static ssize_t charge_control_threshold_store(u8 offset, + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u8 wdata; + int result; + + result = kstrtou8(buf, 10, &wdata); + if (result < 0) + return result; + + wdata += offset; + if (wdata < conf.charge_control.range_min || + wdata > conf.charge_control.range_max) + return -EINVAL; + + result = ec_write(conf.charge_control.address, wdata); + if (result < 0) + return result; + + return count; +} + +static ssize_t charge_control_start_threshold_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + return charge_control_threshold_show(conf.charge_control.offset_start, + device, attr, buf); +} + +static ssize_t charge_control_start_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return charge_control_threshold_store(conf.charge_control.offset_start, + dev, attr, buf, count); +} + +static ssize_t charge_control_end_threshold_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + return charge_control_threshold_show(conf.charge_control.offset_end, + device, attr, buf); +} + +static ssize_t charge_control_end_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return charge_control_threshold_store(conf.charge_control.offset_end, + dev, attr, buf, count); +} + +static DEVICE_ATTR_RW(charge_control_start_threshold); +static DEVICE_ATTR_RW(charge_control_end_threshold); + +static struct attribute *msi_battery_attrs[] = { + &dev_attr_charge_control_start_threshold.attr, + &dev_attr_charge_control_end_threshold.attr, + NULL +}; + +ATTRIBUTE_GROUPS(msi_battery); + +static int msi_battery_add(struct power_supply *battery, + struct acpi_battery_hook *hook) +{ + return device_add_groups(&battery->dev, msi_battery_groups); +} + +static int msi_battery_remove(struct power_supply *battery, + struct acpi_battery_hook *hook) +{ + device_remove_groups(&battery->dev, msi_battery_groups); + return 0; +} + +static struct acpi_battery_hook battery_hook = { + .add_battery = msi_battery_add, + .remove_battery = msi_battery_remove, + .name = MSI_EC_DRIVER_NAME, +}; + +/* + * Module load/unload + */ + +static const struct dmi_system_id msi_dmi_table[] __initconst __maybe_unused = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + }, + }, + {} +}; +MODULE_DEVICE_TABLE(dmi, msi_dmi_table); + +static int __init load_configuration(void) +{ + int result; + + u8 fw_version[MSI_EC_FW_VERSION_LENGTH + 1]; + + /* get firmware version */ + result = ec_get_firmware_version(fw_version); + if (result < 0) + return result; + + /* load the suitable configuration, if exists */ + for (int i = 0; CONFIGS[i]; i++) { + if (match_string(CONFIGS[i]->allowed_fw, -1, fw_version) != -EINVAL) { + conf = *CONFIGS[i]; + conf.allowed_fw = NULL; + return 0; + } + } + + /* config not found */ + + for (int i = 0; i < MSI_EC_FW_VERSION_LENGTH; i++) { + if (!isgraph(fw_version[i])) { + pr_warn("Unable to find a valid firmware version!\n"); + return -EOPNOTSUPP; + } + } + + pr_warn("Firmware version is not supported: '%s'\n", fw_version); + return -EOPNOTSUPP; +} + +static int __init msi_ec_init(void) +{ + int result; + + result = load_configuration(); + if (result < 0) + return result; + + battery_hook_register(&battery_hook); + return 0; +} + +static void __exit msi_ec_exit(void) +{ + battery_hook_unregister(&battery_hook); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jose Angel Pastrana <japp0005@red.ujaen.es>"); +MODULE_AUTHOR("Aakash Singh <mail@singhaakash.dev>"); +MODULE_AUTHOR("Nikita Kravets <teackot@gmail.com>"); +MODULE_DESCRIPTION("MSI Embedded Controller"); + +module_init(msi_ec_init); +module_exit(msi_ec_exit); diff --git a/drivers/platform/x86/msi-ec.h b/drivers/platform/x86/msi-ec.h new file mode 100644 index 000000000000..be3533dc9cc6 --- /dev/null +++ b/drivers/platform/x86/msi-ec.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +/* + * msi-ec: MSI laptops' embedded controller driver. + * + * Copyright (C) 2023 Jose Angel Pastrana <japp0005@red.ujaen.es> + * Copyright (C) 2023 Aakash Singh <mail@singhaakash.dev> + * Copyright (C) 2023 Nikita Kravets <teackot@gmail.com> + */ + +#ifndef _MSI_EC_H_ +#define _MSI_EC_H_ + +#include <linux/types.h> + +#define MSI_EC_DRIVER_NAME "msi-ec" + +#define MSI_EC_ADDR_UNKNOWN 0xff01 // unknown address +#define MSI_EC_ADDR_UNSUPP 0xff01 // unsupported parameter + +// Firmware info addresses are universal +#define MSI_EC_FW_VERSION_ADDRESS 0xa0 +#define MSI_EC_FW_DATE_ADDRESS 0xac +#define MSI_EC_FW_TIME_ADDRESS 0xb4 +#define MSI_EC_FW_VERSION_LENGTH 12 +#define MSI_EC_FW_DATE_LENGTH 8 +#define MSI_EC_FW_TIME_LENGTH 8 + +struct msi_ec_charge_control_conf { + int address; + int offset_start; + int offset_end; + int range_min; + int range_max; +}; + +struct msi_ec_webcam_conf { + int address; + int block_address; + int bit; +}; + +struct msi_ec_fn_super_swap_conf { + int address; + int bit; +}; + +struct msi_ec_cooler_boost_conf { + int address; + int bit; +}; + +#define MSI_EC_MODE_NULL { NULL, 0 } +struct msi_ec_mode { + const char *name; + int value; +}; + +struct msi_ec_shift_mode_conf { + int address; + struct msi_ec_mode modes[5]; // fixed size for easier hard coding +}; + +struct msi_ec_super_battery_conf { + int address; + int mask; +}; + +struct msi_ec_fan_mode_conf { + int address; + struct msi_ec_mode modes[5]; // fixed size for easier hard coding +}; + +struct msi_ec_cpu_conf { + int rt_temp_address; + int rt_fan_speed_address; // realtime + int rt_fan_speed_base_min; + int rt_fan_speed_base_max; + int bs_fan_speed_address; // basic + int bs_fan_speed_base_min; + int bs_fan_speed_base_max; +}; + +struct msi_ec_gpu_conf { + int rt_temp_address; + int rt_fan_speed_address; // realtime +}; + +struct msi_ec_led_conf { + int micmute_led_address; + int mute_led_address; + int bit; +}; + +#define MSI_EC_KBD_BL_STATE_MASK 0x3 +struct msi_ec_kbd_bl_conf { + int bl_mode_address; + int bl_modes[2]; + int max_mode; + + int bl_state_address; + int state_base_value; + int max_state; +}; + +struct msi_ec_conf { + const char * const *allowed_fw; + + struct msi_ec_charge_control_conf charge_control; + struct msi_ec_webcam_conf webcam; + struct msi_ec_fn_super_swap_conf fn_super_swap; + struct msi_ec_cooler_boost_conf cooler_boost; + struct msi_ec_shift_mode_conf shift_mode; + struct msi_ec_super_battery_conf super_battery; + struct msi_ec_fan_mode_conf fan_mode; + struct msi_ec_cpu_conf cpu; + struct msi_ec_gpu_conf gpu; + struct msi_ec_led_conf leds; + struct msi_ec_kbd_bl_conf kbd_bl; +}; + +#endif // _MSI_EC_H_ diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c index d063d91db9bc..3aa63b18a2e1 100644 --- a/drivers/platform/x86/pcengines-apuv2.c +++ b/drivers/platform/x86/pcengines-apuv2.c @@ -291,5 +291,4 @@ MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>"); MODULE_DESCRIPTION("PC Engines APUv2/APUv3 board GPIO/LEDs/keys driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(dmi, apu_gpio_dmi_table); -MODULE_ALIAS("platform:pcengines-apuv2"); MODULE_SOFTDEP("pre: platform:" AMD_FCH_GPIO_DRIVER_NAME " platform:leds-gpio platform:gpio_keys_polled"); diff --git a/drivers/platform/x86/peaq-wmi.c b/drivers/platform/x86/peaq-wmi.c deleted file mode 100644 index cf9c44c20a82..000000000000 --- a/drivers/platform/x86/peaq-wmi.c +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * PEAQ 2-in-1 WMI hotkey driver - * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> - */ - -#include <linux/acpi.h> -#include <linux/dmi.h> -#include <linux/input.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#define PEAQ_DOLBY_BUTTON_GUID "ABBC0F6F-8EA1-11D1-00A0-C90629100000" -#define PEAQ_DOLBY_BUTTON_METHOD_ID 5 -#define PEAQ_POLL_INTERVAL_MS 250 -#define PEAQ_POLL_IGNORE_MS 500 -#define PEAQ_POLL_MAX_MS 1000 - -MODULE_ALIAS("wmi:"PEAQ_DOLBY_BUTTON_GUID); - -static struct input_dev *peaq_poll_dev; - -/* - * The Dolby button (yes really a Dolby button) causes an ACPI variable to get - * set on both press and release. The WMI method checks and clears that flag. - * So for a press + release we will get back One from the WMI method either once - * (if polling after the release) or twice (polling between press and release). - * We ignore events for 0.5s after the first event to avoid reporting 2 presses. - */ -static void peaq_wmi_poll(struct input_dev *input_dev) -{ - static unsigned long last_event_time; - static bool had_events; - union acpi_object obj; - acpi_status status; - u32 dummy = 0; - - struct acpi_buffer input = { sizeof(dummy), &dummy }; - struct acpi_buffer output = { sizeof(obj), &obj }; - - status = wmi_evaluate_method(PEAQ_DOLBY_BUTTON_GUID, 0, - PEAQ_DOLBY_BUTTON_METHOD_ID, - &input, &output); - if (ACPI_FAILURE(status)) - return; - - if (obj.type != ACPI_TYPE_INTEGER) { - dev_err(&input_dev->dev, - "Error WMBC did not return an integer\n"); - return; - } - - if (!obj.integer.value) - return; - - if (had_events && time_before(jiffies, last_event_time + - msecs_to_jiffies(PEAQ_POLL_IGNORE_MS))) - return; - - input_event(input_dev, EV_KEY, KEY_SOUND, 1); - input_sync(input_dev); - input_event(input_dev, EV_KEY, KEY_SOUND, 0); - input_sync(input_dev); - - last_event_time = jiffies; - had_events = true; -} - -/* Some other devices (Shuttle XS35) use the same WMI GUID for other purposes */ -static const struct dmi_system_id peaq_dmi_table[] __initconst = { - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"), - DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"), - }, - }, - {} -}; - -static int __init peaq_wmi_init(void) -{ - int err; - - /* WMI GUID is not unique, also check for a DMI match */ - if (!dmi_check_system(peaq_dmi_table)) - return -ENODEV; - - if (!wmi_has_guid(PEAQ_DOLBY_BUTTON_GUID)) - return -ENODEV; - - peaq_poll_dev = input_allocate_device(); - if (!peaq_poll_dev) - return -ENOMEM; - - peaq_poll_dev->name = "PEAQ WMI hotkeys"; - peaq_poll_dev->phys = "wmi/input0"; - peaq_poll_dev->id.bustype = BUS_HOST; - input_set_capability(peaq_poll_dev, EV_KEY, KEY_SOUND); - - err = input_setup_polling(peaq_poll_dev, peaq_wmi_poll); - if (err) - goto err_out; - - input_set_poll_interval(peaq_poll_dev, PEAQ_POLL_INTERVAL_MS); - input_set_max_poll_interval(peaq_poll_dev, PEAQ_POLL_MAX_MS); - - err = input_register_device(peaq_poll_dev); - if (err) - goto err_out; - - return 0; - -err_out: - input_free_device(peaq_poll_dev); - return err; -} - -static void __exit peaq_wmi_exit(void) -{ - input_unregister_device(peaq_poll_dev); -} - -module_init(peaq_wmi_init); -module_exit(peaq_wmi_exit); - -MODULE_DESCRIPTION("PEAQ 2-in-1 WMI hotkey driver"); -MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/samsung-q10.c b/drivers/platform/x86/samsung-q10.c index 6eb08b539311..134e2c3d91ca 100644 --- a/drivers/platform/x86/samsung-q10.c +++ b/drivers/platform/x86/samsung-q10.c @@ -65,14 +65,12 @@ static int samsungq10_probe(struct platform_device *pdev) return 0; } -static int samsungq10_remove(struct platform_device *pdev) +static void samsungq10_remove(struct platform_device *pdev) { struct backlight_device *bd = platform_get_drvdata(pdev); backlight_device_unregister(bd); - - return 0; } static struct platform_driver samsungq10_driver = { @@ -80,7 +78,7 @@ static struct platform_driver samsungq10_driver = { .name = KBUILD_MODNAME, }, .probe = samsungq10_probe, - .remove = samsungq10_remove, + .remove_new = samsungq10_remove, }; static struct platform_device *samsungq10_device; diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index 5362f1a7b77c..cd25125b7923 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -265,13 +265,11 @@ static int smi_probe(struct platform_device *pdev) } } -static int smi_remove(struct platform_device *pdev) +static void smi_remove(struct platform_device *pdev) { struct smi *smi = platform_get_drvdata(pdev); smi_devs_unregister(smi); - - return 0; } static const struct smi_node bsg1160_data = { @@ -339,7 +337,7 @@ static struct platform_driver smi_driver = { .acpi_match_table = smi_acpi_ids, }, .probe = smi_probe, - .remove = smi_remove, + .remove_new = smi_remove, }; module_platform_driver(smi_driver); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 537d6a2d0781..9569f11dec8c 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -3287,7 +3287,7 @@ static void sony_nc_remove(struct acpi_device *device) dprintk(SONY_NC_DRIVER_NAME " removed.\n"); } -static const struct acpi_device_id sony_device_ids[] = { +static const struct acpi_device_id sony_device_ids[] __maybe_unused = { {SONY_NC_HID, 0}, {SONY_PIC_HID, 0}, {"", 0}, diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c index 78dc82bda4dd..1138f770149d 100644 --- a/drivers/platform/x86/think-lmi.c +++ b/drivers/platform/x86/think-lmi.c @@ -862,19 +862,18 @@ static umode_t auth_attr_is_visible(struct kobject *kobj, struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); /* We only want to display level and index settings on HDD/NVMe */ - if ((attr == (struct attribute *)&auth_index) || - (attr == (struct attribute *)&auth_level)) { + if (attr == &auth_index.attr || attr == &auth_level.attr) { if ((setting == tlmi_priv.pwd_hdd) || (setting == tlmi_priv.pwd_nvme)) return attr->mode; return 0; } /* We only display certificates on Admin account, if supported */ - if ((attr == (struct attribute *)&auth_certificate) || - (attr == (struct attribute *)&auth_signature) || - (attr == (struct attribute *)&auth_save_signature) || - (attr == (struct attribute *)&auth_cert_thumb) || - (attr == (struct attribute *)&auth_cert_to_password)) { + if (attr == &auth_certificate.attr || + attr == &auth_signature.attr || + attr == &auth_save_signature.attr || + attr == &auth_cert_thumb.attr || + attr == &auth_cert_to_password.attr) { if ((setting == tlmi_priv.pwd_admin) && tlmi_priv.certificate_support) return attr->mode; return 0; @@ -1079,33 +1078,6 @@ static const struct attribute_group tlmi_attr_group = { .attrs = tlmi_attrs, }; -static ssize_t tlmi_attr_show(struct kobject *kobj, struct attribute *attr, - char *buf) -{ - struct kobj_attribute *kattr; - - kattr = container_of(attr, struct kobj_attribute, attr); - if (kattr->show) - return kattr->show(kobj, kattr, buf); - return -EIO; -} - -static ssize_t tlmi_attr_store(struct kobject *kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct kobj_attribute *kattr; - - kattr = container_of(attr, struct kobj_attribute, attr); - if (kattr->store) - return kattr->store(kobj, kattr, buf, count); - return -EIO; -} - -static const struct sysfs_ops tlmi_kobj_sysfs_ops = { - .show = tlmi_attr_show, - .store = tlmi_attr_store, -}; - static void tlmi_attr_setting_release(struct kobject *kobj) { struct tlmi_attr_setting *setting = to_tlmi_attr_setting(kobj); @@ -1123,12 +1095,12 @@ static void tlmi_pwd_setting_release(struct kobject *kobj) static const struct kobj_type tlmi_attr_setting_ktype = { .release = &tlmi_attr_setting_release, - .sysfs_ops = &tlmi_kobj_sysfs_ops, + .sysfs_ops = &kobj_sysfs_ops, }; static const struct kobj_type tlmi_pwd_setting_ktype = { .release = &tlmi_pwd_setting_release, - .sysfs_ops = &tlmi_kobj_sysfs_ops, + .sysfs_ops = &kobj_sysfs_ops, }; static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, @@ -1385,7 +1357,6 @@ static struct tlmi_pwd_setting *tlmi_create_auth(const char *pwd_type, static int tlmi_analyze(void) { - acpi_status status; int i, ret; if (wmi_has_guid(LENOVO_SET_BIOS_SETTINGS_GUID) && @@ -1422,8 +1393,8 @@ static int tlmi_analyze(void) char *p; tlmi_priv.setting[i] = NULL; - status = tlmi_setting(i, &item, LENOVO_BIOS_SETTING_GUID); - if (ACPI_FAILURE(status)) + ret = tlmi_setting(i, &item, LENOVO_BIOS_SETTING_GUID); + if (ret) break; if (!item) break; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7191ff2625b1..6fe82f805ea8 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -11699,6 +11699,7 @@ static int __init thinkpad_acpi_module_init(void) { const struct dmi_system_id *dmi_id; int ret, i; + acpi_object_type obj_type; tpacpi_lifecycle = TPACPI_LIFE_INIT; @@ -11724,6 +11725,21 @@ static int __init thinkpad_acpi_module_init(void) TPACPI_ACPIHANDLE_INIT(ecrd); TPACPI_ACPIHANDLE_INIT(ecwr); + /* + * Quirk: in some models (e.g. X380 Yoga), an object named ECRD + * exists, but it is a register, not a method. + */ + if (ecrd_handle) { + acpi_get_type(ecrd_handle, &obj_type); + if (obj_type != ACPI_TYPE_METHOD) + ecrd_handle = NULL; + } + if (ecwr_handle) { + acpi_get_type(ecwr_handle, &obj_type); + if (obj_type != ACPI_TYPE_METHOD) + ecwr_handle = NULL; + } + tpacpi_wq = create_singlethread_workqueue(TPACPI_WORKQUEUE_NAME); if (!tpacpi_wq) { thinkpad_acpi_module_exit(); diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 4fe7650dd014..d81319a502ef 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -1369,7 +1369,7 @@ static void acpi_wmi_notify_handler(acpi_handle handle, u32 event, event, 0); } -static int acpi_wmi_remove(struct platform_device *device) +static void acpi_wmi_remove(struct platform_device *device) { struct acpi_device *acpi_device = ACPI_COMPANION(&device->dev); @@ -1379,8 +1379,6 @@ static int acpi_wmi_remove(struct platform_device *device) ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); wmi_free_devices(acpi_device); device_unregister(dev_get_drvdata(&device->dev)); - - return 0; } static int acpi_wmi_probe(struct platform_device *device) @@ -1468,7 +1466,7 @@ static struct platform_driver acpi_wmi_driver = { .acpi_match_table = wmi_device_ids, }, .probe = acpi_wmi_probe, - .remove = acpi_wmi_remove, + .remove_new = acpi_wmi_remove, }; static int __init acpi_wmi_init(void) diff --git a/drivers/platform/x86/x86-android-tablets.c b/drivers/platform/x86/x86-android-tablets.c deleted file mode 100644 index 111b007656fc..000000000000 --- a/drivers/platform/x86/x86-android-tablets.c +++ /dev/null @@ -1,1803 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * DMI based code to deal with broken DSDTs on X86 tablets which ship with - * Android as (part of) the factory image. The factory kernels shipped on these - * devices typically have a bunch of things hardcoded, rather than specified - * in their DSDT. - * - * Copyright (C) 2021-2022 Hans de Goede <hdegoede@redhat.com> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/acpi.h> -#include <linux/dmi.h> -#include <linux/efi.h> -#include <linux/gpio_keys.h> -#include <linux/gpio/consumer.h> -#include <linux/gpio/driver.h> -#include <linux/gpio/machine.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/module.h> -#include <linux/mod_devicetable.h> -#include <linux/pinctrl/consumer.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/lp855x.h> -#include <linux/platform_device.h> -#include <linux/power/bq24190_charger.h> -#include <linux/reboot.h> -#include <linux/rmi.h> -#include <linux/serdev.h> -#include <linux/spi/spi.h> -#include <linux/string.h> -/* For gpio_get_desc() which is EXPORT_SYMBOL_GPL() */ -#include "../../gpio/gpiolib.h" -#include "../../gpio/gpiolib-acpi.h" - -/* - * Helper code to get Linux IRQ numbers given a description of the IRQ source - * (either IOAPIC index, or GPIO chip name + pin-number). - */ -enum x86_acpi_irq_type { - X86_ACPI_IRQ_TYPE_NONE, - X86_ACPI_IRQ_TYPE_APIC, - X86_ACPI_IRQ_TYPE_GPIOINT, - X86_ACPI_IRQ_TYPE_PMIC, -}; - -struct x86_acpi_irq_data { - char *chip; /* GPIO chip label (GPIOINT) or PMIC ACPI path (PMIC) */ - enum x86_acpi_irq_type type; - enum irq_domain_bus_token domain; - int index; - int trigger; /* ACPI_EDGE_SENSITIVE / ACPI_LEVEL_SENSITIVE */ - int polarity; /* ACPI_ACTIVE_HIGH / ACPI_ACTIVE_LOW / ACPI_ACTIVE_BOTH */ -}; - -static int gpiochip_find_match_label(struct gpio_chip *gc, void *data) -{ - return gc->label && !strcmp(gc->label, data); -} - -static int x86_android_tablet_get_gpiod(char *label, int pin, struct gpio_desc **desc) -{ - struct gpio_desc *gpiod; - struct gpio_chip *chip; - - chip = gpiochip_find(label, gpiochip_find_match_label); - if (!chip) { - pr_err("error cannot find GPIO chip %s\n", label); - return -ENODEV; - } - - gpiod = gpiochip_get_desc(chip, pin); - if (IS_ERR(gpiod)) { - pr_err("error %ld getting GPIO %s %d\n", PTR_ERR(gpiod), label, pin); - return PTR_ERR(gpiod); - } - - *desc = gpiod; - return 0; -} - -static int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data) -{ - struct irq_fwspec fwspec = { }; - struct irq_domain *domain; - struct acpi_device *adev; - struct gpio_desc *gpiod; - unsigned int irq_type; - acpi_handle handle; - acpi_status status; - int irq, ret; - - switch (data->type) { - case X86_ACPI_IRQ_TYPE_APIC: - /* - * The DSDT may already reference the GSI in a device skipped by - * acpi_quirk_skip_i2c_client_enumeration(). Unregister the GSI - * to avoid EBUSY errors in this case. - */ - acpi_unregister_gsi(data->index); - irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity); - if (irq < 0) - pr_err("error %d getting APIC IRQ %d\n", irq, data->index); - - return irq; - case X86_ACPI_IRQ_TYPE_GPIOINT: - /* Like acpi_dev_gpio_irq_get(), but without parsing ACPI resources */ - ret = x86_android_tablet_get_gpiod(data->chip, data->index, &gpiod); - if (ret) - return ret; - - irq = gpiod_to_irq(gpiod); - if (irq < 0) { - pr_err("error %d getting IRQ %s %d\n", irq, data->chip, data->index); - return irq; - } - - irq_type = acpi_dev_get_irq_type(data->trigger, data->polarity); - if (irq_type != IRQ_TYPE_NONE && irq_type != irq_get_trigger_type(irq)) - irq_set_irq_type(irq, irq_type); - - return irq; - case X86_ACPI_IRQ_TYPE_PMIC: - status = acpi_get_handle(NULL, data->chip, &handle); - if (ACPI_FAILURE(status)) { - pr_err("error could not get %s handle\n", data->chip); - return -ENODEV; - } - - adev = acpi_fetch_acpi_dev(handle); - if (!adev) { - pr_err("error could not get %s adev\n", data->chip); - return -ENODEV; - } - - fwspec.fwnode = acpi_fwnode_handle(adev); - domain = irq_find_matching_fwspec(&fwspec, data->domain); - if (!domain) { - pr_err("error could not find IRQ domain for %s\n", data->chip); - return -ENODEV; - } - - return irq_create_mapping(domain, data->index); - default: - return 0; - } -} - -struct x86_i2c_client_info { - struct i2c_board_info board_info; - char *adapter_path; - struct x86_acpi_irq_data irq_data; -}; - -struct x86_serdev_info { - const char *ctrl_hid; - const char *ctrl_uid; - const char *ctrl_devname; - /* - * ATM the serdev core only supports of or ACPI matching; and sofar all - * Android x86 tablets DSDTs have usable serdev nodes, but sometimes - * under the wrong controller. So we just tie the existing serdev ACPI - * node to the right controller. - */ - const char *serdev_hid; -}; - -struct x86_dev_info { - char *invalid_aei_gpiochip; - const char * const *modules; - const struct software_node *bat_swnode; - struct gpiod_lookup_table * const *gpiod_lookup_tables; - const struct x86_i2c_client_info *i2c_client_info; - const struct platform_device_info *pdev_info; - const struct x86_serdev_info *serdev_info; - int i2c_client_count; - int pdev_count; - int serdev_count; - int (*init)(void); - void (*exit)(void); -}; - -/* Generic / shared charger / battery settings */ -static const char * const tusb1211_chg_det_psy[] = { "tusb1211-charger-detect" }; -static const char * const bq24190_psy[] = { "bq24190-charger" }; -static const char * const bq25890_psy[] = { "bq25890-charger-0" }; - -static const struct property_entry fg_bq24190_supply_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), - { } -}; - -static const struct software_node fg_bq24190_supply_node = { - .properties = fg_bq24190_supply_props, -}; - -static const struct property_entry fg_bq25890_supply_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_psy), - { } -}; - -static const struct software_node fg_bq25890_supply_node = { - .properties = fg_bq25890_supply_props, -}; - -/* LiPo HighVoltage (max 4.35V) settings used by most devs with a HV bat. */ -static const struct property_entry generic_lipo_hv_4v35_battery_props[] = { - PROPERTY_ENTRY_STRING("compatible", "simple-battery"), - PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion"), - PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), - PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), - PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 1856000), - PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4352000), - PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), - { } -}; - -static const struct software_node generic_lipo_hv_4v35_battery_node = { - .properties = generic_lipo_hv_4v35_battery_props, -}; - -/* For enabling the bq24190 5V boost based on id-pin */ -static struct regulator_consumer_supply intel_int3496_consumer = { - .supply = "vbus", - .dev_name = "intel-int3496", -}; - -static const struct regulator_init_data bq24190_vbus_init_data = { - .constraints = { - .name = "bq24190_vbus", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .consumer_supplies = &intel_int3496_consumer, - .num_consumer_supplies = 1, -}; - -static struct bq24190_platform_data bq24190_pdata = { - .regulator_init_data = &bq24190_vbus_init_data, -}; - -static const char * const bq24190_modules[] __initconst = { - "intel_crystal_cove_charger", /* For the bq24190 IRQ */ - "bq24190_charger", /* For the Vbus regulator for intel-int3496 */ - NULL -}; - -/* Generic pdevs array and gpio-lookups for micro USB ID pin handling */ -static const struct platform_device_info int3496_pdevs[] __initconst = { - { - /* For micro USB ID pin handling */ - .name = "intel-int3496", - .id = PLATFORM_DEVID_NONE, - }, -}; - -static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = { - .dev_id = "intel-int3496", - .table = { - GPIO_LOOKUP("INT33FC:02", 22, "id", GPIO_ACTIVE_HIGH), - { } - }, -}; - -/* - * Advantech MICA-071 - * This is a standard Windows tablet, but it has an extra "quick launch" button - * which is not described in the ACPI tables in anyway. - * Use the x86-android-tablets infra to create a gpio-button device for this. - */ -static struct gpio_keys_button advantech_mica_071_button = { - .code = KEY_PROG1, - /* .gpio gets filled in by advantech_mica_071_init() */ - .active_low = true, - .desc = "prog1_key", - .type = EV_KEY, - .wakeup = false, - .debounce_interval = 50, -}; - -static const struct gpio_keys_platform_data advantech_mica_071_button_pdata __initconst = { - .buttons = &advantech_mica_071_button, - .nbuttons = 1, - .name = "prog1_key", -}; - -static const struct platform_device_info advantech_mica_071_pdevs[] __initconst = { - { - .name = "gpio-keys", - .id = PLATFORM_DEVID_AUTO, - .data = &advantech_mica_071_button_pdata, - .size_data = sizeof(advantech_mica_071_button_pdata), - }, -}; - -static int __init advantech_mica_071_init(void) -{ - struct gpio_desc *gpiod; - int ret; - - ret = x86_android_tablet_get_gpiod("INT33FC:00", 2, &gpiod); - if (ret < 0) - return ret; - advantech_mica_071_button.gpio = desc_to_gpio(gpiod); - - return 0; -} - -static const struct x86_dev_info advantech_mica_071_info __initconst = { - .pdev_info = advantech_mica_071_pdevs, - .pdev_count = ARRAY_SIZE(advantech_mica_071_pdevs), - .init = advantech_mica_071_init, -}; - -/* Asus ME176C and TF103C tablets shared data */ -static struct gpio_keys_button asus_me176c_tf103c_lid = { - .code = SW_LID, - /* .gpio gets filled in by asus_me176c_tf103c_init() */ - .active_low = true, - .desc = "lid_sw", - .type = EV_SW, - .wakeup = true, - .debounce_interval = 50, -}; - -static const struct gpio_keys_platform_data asus_me176c_tf103c_lid_pdata __initconst = { - .buttons = &asus_me176c_tf103c_lid, - .nbuttons = 1, - .name = "lid_sw", -}; - -static const struct platform_device_info asus_me176c_tf103c_pdevs[] __initconst = { - { - .name = "gpio-keys", - .id = PLATFORM_DEVID_AUTO, - .data = &asus_me176c_tf103c_lid_pdata, - .size_data = sizeof(asus_me176c_tf103c_lid_pdata), - }, - { - /* For micro USB ID pin handling */ - .name = "intel-int3496", - .id = PLATFORM_DEVID_NONE, - }, -}; - -static int __init asus_me176c_tf103c_init(void) -{ - struct gpio_desc *gpiod; - int ret; - - ret = x86_android_tablet_get_gpiod("INT33FC:02", 12, &gpiod); - if (ret < 0) - return ret; - asus_me176c_tf103c_lid.gpio = desc_to_gpio(gpiod); - - return 0; -} - - -/* Asus ME176C tablets have an Android factory img with everything hardcoded */ -static const char * const asus_me176c_accel_mount_matrix[] = { - "-1", "0", "0", - "0", "1", "0", - "0", "0", "1" -}; - -static const struct property_entry asus_me176c_accel_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_me176c_accel_mount_matrix), - { } -}; - -static const struct software_node asus_me176c_accel_node = { - .properties = asus_me176c_accel_props, -}; - -static const struct property_entry asus_me176c_bq24190_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), - PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), - PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), - PROPERTY_ENTRY_BOOL("omit-battery-class"), - PROPERTY_ENTRY_BOOL("disable-reset"), - { } -}; - -static const struct software_node asus_me176c_bq24190_node = { - .properties = asus_me176c_bq24190_props, -}; - -static const struct property_entry asus_me176c_ug3105_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), - PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), - PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 10000), - { } -}; - -static const struct software_node asus_me176c_ug3105_node = { - .properties = asus_me176c_ug3105_props, -}; - -static const struct x86_i2c_client_info asus_me176c_i2c_clients[] __initconst = { - { - /* bq24297 battery charger */ - .board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24297", - .swnode = &asus_me176c_bq24190_node, - .platform_data = &bq24190_pdata, - }, - .adapter_path = "\\_SB_.I2C1", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_PMIC, - .chip = "\\_SB_.I2C7.PMIC", - .domain = DOMAIN_BUS_WAKEUP, - .index = 0, - }, - }, { - /* ug3105 battery monitor */ - .board_info = { - .type = "ug3105", - .addr = 0x70, - .dev_name = "ug3105", - .swnode = &asus_me176c_ug3105_node, - }, - .adapter_path = "\\_SB_.I2C1", - }, { - /* ak09911 compass */ - .board_info = { - .type = "ak09911", - .addr = 0x0c, - .dev_name = "ak09911", - }, - .adapter_path = "\\_SB_.I2C5", - }, { - /* kxtj21009 accel */ - .board_info = { - .type = "kxtj21009", - .addr = 0x0f, - .dev_name = "kxtj21009", - .swnode = &asus_me176c_accel_node, - }, - .adapter_path = "\\_SB_.I2C5", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x44, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, { - /* goodix touchscreen */ - .board_info = { - .type = "GDIX1001:00", - .addr = 0x14, - .dev_name = "goodix_ts", - }, - .adapter_path = "\\_SB_.I2C6", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x45, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, -}; - -static const struct x86_serdev_info asus_me176c_serdevs[] __initconst = { - { - .ctrl_hid = "80860F0A", - .ctrl_uid = "2", - .ctrl_devname = "serial0", - .serdev_hid = "BCM2E3A", - }, -}; - -static struct gpiod_lookup_table asus_me176c_goodix_gpios = { - .dev_id = "i2c-goodix_ts", - .table = { - GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 28, "irq", GPIO_ACTIVE_HIGH), - { } - }, -}; - -static struct gpiod_lookup_table * const asus_me176c_gpios[] = { - &int3496_gpo2_pin22_gpios, - &asus_me176c_goodix_gpios, - NULL -}; - -static const struct x86_dev_info asus_me176c_info __initconst = { - .i2c_client_info = asus_me176c_i2c_clients, - .i2c_client_count = ARRAY_SIZE(asus_me176c_i2c_clients), - .pdev_info = asus_me176c_tf103c_pdevs, - .pdev_count = ARRAY_SIZE(asus_me176c_tf103c_pdevs), - .serdev_info = asus_me176c_serdevs, - .serdev_count = ARRAY_SIZE(asus_me176c_serdevs), - .gpiod_lookup_tables = asus_me176c_gpios, - .bat_swnode = &generic_lipo_hv_4v35_battery_node, - .modules = bq24190_modules, - .invalid_aei_gpiochip = "INT33FC:02", - .init = asus_me176c_tf103c_init, -}; - -/* Asus TF103C tablets have an Android factory img with everything hardcoded */ -static const char * const asus_tf103c_accel_mount_matrix[] = { - "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1" -}; - -static const struct property_entry asus_tf103c_accel_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_tf103c_accel_mount_matrix), - { } -}; - -static const struct software_node asus_tf103c_accel_node = { - .properties = asus_tf103c_accel_props, -}; - -static const struct property_entry asus_tf103c_touchscreen_props[] = { - PROPERTY_ENTRY_STRING("compatible", "atmel,atmel_mxt_ts"), - { } -}; - -static const struct software_node asus_tf103c_touchscreen_node = { - .properties = asus_tf103c_touchscreen_props, -}; - -static const struct property_entry asus_tf103c_battery_props[] = { - PROPERTY_ENTRY_STRING("compatible", "simple-battery"), - PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion-polymer"), - PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), - PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), - PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 2048000), - PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4208000), - PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), - { } -}; - -static const struct software_node asus_tf103c_battery_node = { - .properties = asus_tf103c_battery_props, -}; - -static const struct property_entry asus_tf103c_bq24190_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), - PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), - PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), - PROPERTY_ENTRY_BOOL("omit-battery-class"), - PROPERTY_ENTRY_BOOL("disable-reset"), - { } -}; - -static const struct software_node asus_tf103c_bq24190_node = { - .properties = asus_tf103c_bq24190_props, -}; - -static const struct property_entry asus_tf103c_ug3105_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), - PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), - PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 5000), - { } -}; - -static const struct software_node asus_tf103c_ug3105_node = { - .properties = asus_tf103c_ug3105_props, -}; - -static const struct x86_i2c_client_info asus_tf103c_i2c_clients[] __initconst = { - { - /* bq24297 battery charger */ - .board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24297", - .swnode = &asus_tf103c_bq24190_node, - .platform_data = &bq24190_pdata, - }, - .adapter_path = "\\_SB_.I2C1", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_PMIC, - .chip = "\\_SB_.I2C7.PMIC", - .domain = DOMAIN_BUS_WAKEUP, - .index = 0, - }, - }, { - /* ug3105 battery monitor */ - .board_info = { - .type = "ug3105", - .addr = 0x70, - .dev_name = "ug3105", - .swnode = &asus_tf103c_ug3105_node, - }, - .adapter_path = "\\_SB_.I2C1", - }, { - /* ak09911 compass */ - .board_info = { - .type = "ak09911", - .addr = 0x0c, - .dev_name = "ak09911", - }, - .adapter_path = "\\_SB_.I2C5", - }, { - /* kxtj21009 accel */ - .board_info = { - .type = "kxtj21009", - .addr = 0x0f, - .dev_name = "kxtj21009", - .swnode = &asus_tf103c_accel_node, - }, - .adapter_path = "\\_SB_.I2C5", - }, { - /* atmel touchscreen */ - .board_info = { - .type = "atmel_mxt_ts", - .addr = 0x4a, - .dev_name = "atmel_mxt_ts", - .swnode = &asus_tf103c_touchscreen_node, - }, - .adapter_path = "\\_SB_.I2C6", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FC:02", - .index = 28, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, -}; - -static struct gpiod_lookup_table * const asus_tf103c_gpios[] = { - &int3496_gpo2_pin22_gpios, - NULL -}; - -static const struct x86_dev_info asus_tf103c_info __initconst = { - .i2c_client_info = asus_tf103c_i2c_clients, - .i2c_client_count = ARRAY_SIZE(asus_tf103c_i2c_clients), - .pdev_info = asus_me176c_tf103c_pdevs, - .pdev_count = ARRAY_SIZE(asus_me176c_tf103c_pdevs), - .gpiod_lookup_tables = asus_tf103c_gpios, - .bat_swnode = &asus_tf103c_battery_node, - .modules = bq24190_modules, - .invalid_aei_gpiochip = "INT33FC:02", - .init = asus_me176c_tf103c_init, -}; - -/* - * When booted with the BIOS set to Android mode the Chuwi Hi8 (CWI509) DSDT - * contains a whole bunch of bogus ACPI I2C devices and is missing entries - * for the touchscreen and the accelerometer. - */ -static const struct property_entry chuwi_hi8_gsl1680_props[] = { - PROPERTY_ENTRY_U32("touchscreen-size-x", 1665), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), - PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - PROPERTY_ENTRY_BOOL("silead,home-button"), - PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi8.fw"), - { } -}; - -static const struct software_node chuwi_hi8_gsl1680_node = { - .properties = chuwi_hi8_gsl1680_props, -}; - -static const char * const chuwi_hi8_mount_matrix[] = { - "1", "0", "0", - "0", "-1", "0", - "0", "0", "1" -}; - -static const struct property_entry chuwi_hi8_bma250e_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", chuwi_hi8_mount_matrix), - { } -}; - -static const struct software_node chuwi_hi8_bma250e_node = { - .properties = chuwi_hi8_bma250e_props, -}; - -static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = { - { - /* Silead touchscreen */ - .board_info = { - .type = "gsl1680", - .addr = 0x40, - .swnode = &chuwi_hi8_gsl1680_node, - }, - .adapter_path = "\\_SB_.I2C4", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x44, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, { - /* BMA250E accelerometer */ - .board_info = { - .type = "bma250e", - .addr = 0x18, - .swnode = &chuwi_hi8_bma250e_node, - }, - .adapter_path = "\\_SB_.I2C3", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FC:02", - .index = 23, - .trigger = ACPI_LEVEL_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, -}; - -static int __init chuwi_hi8_init(void) -{ - /* - * Avoid the acpi_unregister_gsi() call in x86_acpi_irq_helper_get() - * breaking the touchscreen + logging various errors when the Windows - * BIOS is used. - */ - if (acpi_dev_present("MSSL0001", NULL, 1)) - return -ENODEV; - - return 0; -} - -static const struct x86_dev_info chuwi_hi8_info __initconst = { - .i2c_client_info = chuwi_hi8_i2c_clients, - .i2c_client_count = ARRAY_SIZE(chuwi_hi8_i2c_clients), - .init = chuwi_hi8_init, -}; - -#define CZC_EC_EXTRA_PORT 0x68 -#define CZC_EC_ANDROID_KEYS 0x63 - -static int __init czc_p10t_init(void) -{ - /* - * The device boots up in "Windows 7" mode, when the home button sends a - * Windows specific key sequence (Left Meta + D) and the second button - * sends an unknown one while also toggling the Radio Kill Switch. - * This is a surprising behavior when the second button is labeled "Back". - * - * The vendor-supplied Android-x86 build switches the device to a "Android" - * mode by writing value 0x63 to the I/O port 0x68. This just seems to just - * set bit 6 on address 0x96 in the EC region; switching the bit directly - * seems to achieve the same result. It uses a "p10t_switcher" to do the - * job. It doesn't seem to be able to do anything else, and no other use - * of the port 0x68 is known. - * - * In the Android mode, the home button sends just a single scancode, - * which can be handled in Linux userspace more reasonably and the back - * button only sends a scancode without toggling the kill switch. - * The scancode can then be mapped either to Back or RF Kill functionality - * in userspace, depending on how the button is labeled on that particular - * model. - */ - outb(CZC_EC_ANDROID_KEYS, CZC_EC_EXTRA_PORT); - return 0; -} - -static const struct x86_dev_info czc_p10t __initconst = { - .init = czc_p10t_init, -}; - -/* Lenovo Yoga Book X90F / X91F / X91L need manual instantiation of the fg client */ -static const struct x86_i2c_client_info lenovo_yogabook_x9x_i2c_clients[] __initconst = { - { - /* BQ27542 fuel-gauge */ - .board_info = { - .type = "bq27542", - .addr = 0x55, - .dev_name = "bq27542", - .swnode = &fg_bq25890_supply_node, - }, - .adapter_path = "\\_SB_.PCI0.I2C1", - }, -}; - -static const struct x86_dev_info lenovo_yogabook_x9x_info __initconst = { - .i2c_client_info = lenovo_yogabook_x9x_i2c_clients, - .i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x9x_i2c_clients), -}; - -/* Lenovo Yoga Tablet 2 1050F/L's Android factory img has everything hardcoded */ -static const struct property_entry lenovo_yoga_tab2_830_1050_bq24190_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), - PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), - PROPERTY_ENTRY_BOOL("omit-battery-class"), - PROPERTY_ENTRY_BOOL("disable-reset"), - { } -}; - -static const struct software_node lenovo_yoga_tab2_830_1050_bq24190_node = { - .properties = lenovo_yoga_tab2_830_1050_bq24190_props, -}; - -/* This gets filled by lenovo_yoga_tab2_830_1050_init() */ -static struct rmi_device_platform_data lenovo_yoga_tab2_830_1050_rmi_pdata = { }; - -static struct lp855x_platform_data lenovo_yoga_tab2_830_1050_lp8557_pdata = { - .device_control = 0x86, - .initial_brightness = 128, -}; - -static const struct x86_i2c_client_info lenovo_yoga_tab2_830_1050_i2c_clients[] __initconst = { - { - /* bq24292i battery charger */ - .board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24292i", - .swnode = &lenovo_yoga_tab2_830_1050_bq24190_node, - .platform_data = &bq24190_pdata, - }, - .adapter_path = "\\_SB_.I2C1", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FC:02", - .index = 2, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, { - /* BQ27541 fuel-gauge */ - .board_info = { - .type = "bq27541", - .addr = 0x55, - .dev_name = "bq27541", - .swnode = &fg_bq24190_supply_node, - }, - .adapter_path = "\\_SB_.I2C1", - }, { - /* Synaptics RMI touchscreen */ - .board_info = { - .type = "rmi4_i2c", - .addr = 0x38, - .dev_name = "rmi4_i2c", - .platform_data = &lenovo_yoga_tab2_830_1050_rmi_pdata, - }, - .adapter_path = "\\_SB_.I2C6", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x45, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, { - /* LP8557 Backlight controller */ - .board_info = { - .type = "lp8557", - .addr = 0x2c, - .dev_name = "lp8557", - .platform_data = &lenovo_yoga_tab2_830_1050_lp8557_pdata, - }, - .adapter_path = "\\_SB_.I2C3", - }, -}; - -static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_int3496_gpios = { - .dev_id = "intel-int3496", - .table = { - GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("INT33FC:02", 24, "id", GPIO_ACTIVE_HIGH), - { } - }, -}; - -#define LENOVO_YOGA_TAB2_830_1050_CODEC_NAME "spi-10WM5102:00" - -static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_codec_gpios = { - .dev_id = LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, - .table = { - GPIO_LOOKUP("gpio_crystalcove", 3, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:01", 23, "wlf,ldoena", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("arizona", 2, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("arizona", 4, "wlf,micd-pol", GPIO_ACTIVE_LOW), - { } - }, -}; - -static struct gpiod_lookup_table * const lenovo_yoga_tab2_830_1050_gpios[] = { - &lenovo_yoga_tab2_830_1050_int3496_gpios, - &lenovo_yoga_tab2_830_1050_codec_gpios, - NULL -}; - -static int __init lenovo_yoga_tab2_830_1050_init(void); -static void lenovo_yoga_tab2_830_1050_exit(void); - -static struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initdata = { - .i2c_client_info = lenovo_yoga_tab2_830_1050_i2c_clients, - /* i2c_client_count gets set by lenovo_yoga_tab2_830_1050_init() */ - .pdev_info = int3496_pdevs, - .pdev_count = ARRAY_SIZE(int3496_pdevs), - .gpiod_lookup_tables = lenovo_yoga_tab2_830_1050_gpios, - .bat_swnode = &generic_lipo_hv_4v35_battery_node, - .modules = bq24190_modules, - .invalid_aei_gpiochip = "INT33FC:02", - .init = lenovo_yoga_tab2_830_1050_init, - .exit = lenovo_yoga_tab2_830_1050_exit, -}; - -/* - * The Lenovo Yoga Tablet 2 830 and 1050 (8" vs 10") versions use the same - * mainboard, but they need some different treatment related to the display: - * 1. The 830 uses a portrait LCD panel with a landscape touchscreen, requiring - * the touchscreen driver to adjust the touch-coords to match the LCD. - * 2. Both use an TI LP8557 LED backlight controller. On the 1050 the LP8557's - * PWM input is connected to the PMIC's PWM output and everything works fine - * with the defaults programmed into the LP8557 by the BIOS. - * But on the 830 the LP8557's PWM input is connected to a PWM output coming - * from the LCD panel's controller. The Android code has a hack in the i915 - * driver to write the non-standard DSI reg 0x9f with the desired backlight - * level to set the duty-cycle of the LCD's PWM output. - * - * To avoid having to have a similar hack in the mainline kernel the LP8557 - * entry in lenovo_yoga_tab2_830_1050_i2c_clients instead just programs the - * LP8557 to directly set the level, ignoring the PWM input. This means that - * the LP8557 i2c_client should only be instantiated on the 830. - */ -static int __init lenovo_yoga_tab2_830_1050_init_display(void) -{ - struct gpio_desc *gpiod; - int ret; - - /* Use PMIC GPIO 10 bootstrap pin to differentiate 830 vs 1050 */ - ret = x86_android_tablet_get_gpiod("gpio_crystalcove", 10, &gpiod); - if (ret) - return ret; - - ret = gpiod_get_value_cansleep(gpiod); - if (ret) { - pr_info("detected Lenovo Yoga Tablet 2 1050F/L\n"); - lenovo_yoga_tab2_830_1050_info.i2c_client_count = - ARRAY_SIZE(lenovo_yoga_tab2_830_1050_i2c_clients) - 1; - } else { - pr_info("detected Lenovo Yoga Tablet 2 830F/L\n"); - lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.swap_axes = true; - lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.flip_y = true; - lenovo_yoga_tab2_830_1050_info.i2c_client_count = - ARRAY_SIZE(lenovo_yoga_tab2_830_1050_i2c_clients); - } - - return 0; -} - -/* SUS (INT33FC:02) pin 6 needs to be configured as pmu_clk for the audio codec */ -static const struct pinctrl_map lenovo_yoga_tab2_830_1050_codec_pinctrl_map = - PIN_MAP_MUX_GROUP(LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, "codec_32khz_clk", - "INT33FC:02", "pmu_clk2_grp", "pmu_clk"); - -static struct pinctrl *lenovo_yoga_tab2_830_1050_codec_pinctrl; -static struct sys_off_handler *lenovo_yoga_tab2_830_1050_sys_off_handler; - -static int __init lenovo_yoga_tab2_830_1050_init_codec(void) -{ - struct device *codec_dev; - struct pinctrl *pinctrl; - int ret; - - codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, - LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); - if (!codec_dev) { - pr_err("error cannot find %s device\n", LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); - return -ENODEV; - } - - ret = pinctrl_register_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map, 1); - if (ret) - goto err_put_device; - - pinctrl = pinctrl_get_select(codec_dev, "codec_32khz_clk"); - if (IS_ERR(pinctrl)) { - ret = dev_err_probe(codec_dev, PTR_ERR(pinctrl), "selecting codec_32khz_clk\n"); - goto err_unregister_mappings; - } - - /* We're done with the codec_dev now */ - put_device(codec_dev); - - lenovo_yoga_tab2_830_1050_codec_pinctrl = pinctrl; - return 0; - -err_unregister_mappings: - pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); -err_put_device: - put_device(codec_dev); - return ret; -} - -/* - * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off - * gets used as pm_power_off handler. This causes "poweroff" on these tablets - * to hang hard. Requiring pressing the powerbutton for 30 seconds *twice* - * followed by a normal 3 second press to recover. Avoid this by doing an EFI - * poweroff instead. - */ -static int lenovo_yoga_tab2_830_1050_power_off(struct sys_off_data *data) -{ - efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL); - - return NOTIFY_DONE; -} - -static int __init lenovo_yoga_tab2_830_1050_init(void) -{ - int ret; - - ret = lenovo_yoga_tab2_830_1050_init_display(); - if (ret) - return ret; - - ret = lenovo_yoga_tab2_830_1050_init_codec(); - if (ret) - return ret; - - /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */ - lenovo_yoga_tab2_830_1050_sys_off_handler = - register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1, - lenovo_yoga_tab2_830_1050_power_off, NULL); - if (IS_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler)) - return PTR_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler); - - return 0; -} - -static void lenovo_yoga_tab2_830_1050_exit(void) -{ - unregister_sys_off_handler(lenovo_yoga_tab2_830_1050_sys_off_handler); - - if (lenovo_yoga_tab2_830_1050_codec_pinctrl) { - pinctrl_put(lenovo_yoga_tab2_830_1050_codec_pinctrl); - pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); - } -} - -/* Lenovo Yoga Tab 3 Pro YT3-X90F */ - -/* - * There are 2 batteries, with 2 bq27500 fuel-gauges and 2 bq25892 chargers, - * "bq25890-charger-1" is instantiated from: drivers/i2c/busses/i2c-cht-wc.c. - */ -static const char * const lenovo_yt3_bq25892_0_suppliers[] = { "cht_wcove_pwrsrc" }; -static const char * const bq25890_1_psy[] = { "bq25890-charger-1" }; - -static const struct property_entry fg_bq25890_1_supply_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_1_psy), - { } -}; - -static const struct software_node fg_bq25890_1_supply_node = { - .properties = fg_bq25890_1_supply_props, -}; - -/* bq25892 charger settings for the flat lipo battery behind the screen */ -static const struct property_entry lenovo_yt3_bq25892_0_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), - PROPERTY_ENTRY_STRING("linux,power-supply-name", "bq25892-second-chrg"), - PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), - PROPERTY_ENTRY_BOOL("linux,skip-reset"), - /* Values taken from Android Factory Image */ - PROPERTY_ENTRY_U32("ti,charge-current", 2048000), - PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), - PROPERTY_ENTRY_U32("ti,termination-current", 128000), - PROPERTY_ENTRY_U32("ti,precharge-current", 128000), - PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), - PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), - PROPERTY_ENTRY_U32("ti,boost-max-current", 500000), - PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), - { } -}; - -static const struct software_node lenovo_yt3_bq25892_0_node = { - .properties = lenovo_yt3_bq25892_0_props, -}; - -static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { - { - /* bq27500 fuel-gauge for the flat lipo battery behind the screen */ - .board_info = { - .type = "bq27500", - .addr = 0x55, - .dev_name = "bq27500_0", - .swnode = &fg_bq25890_supply_node, - }, - .adapter_path = "\\_SB_.PCI0.I2C1", - }, { - /* bq25892 charger for the flat lipo battery behind the screen */ - .board_info = { - .type = "bq25892", - .addr = 0x6b, - .dev_name = "bq25892_0", - .swnode = &lenovo_yt3_bq25892_0_node, - }, - .adapter_path = "\\_SB_.PCI0.I2C1", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FF:01", - .index = 5, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, { - /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ - .board_info = { - .type = "bq27500", - .addr = 0x55, - .dev_name = "bq27500_1", - .swnode = &fg_bq25890_1_supply_node, - }, - .adapter_path = "\\_SB_.PCI0.I2C2", - } -}; - -static int __init lenovo_yt3_init(void) -{ - struct gpio_desc *gpiod; - int ret; - - /* - * The "bq25892_0" charger IC has its /CE (Charge-Enable) and OTG pins - * connected to GPIOs, rather then having them hardwired to the correct - * values as is normally done. - * - * The bq25890_charger driver controls these through I2C, but this only - * works if not overridden by the pins. Set these pins here: - * 1. Set /CE to 0 to allow charging. - * 2. Set OTG to 0 disable V5 boost output since the 5V boost output of - * the main "bq25892_1" charger is used when necessary. - */ - - /* /CE pin */ - ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, &gpiod); - if (ret < 0) - return ret; - - /* - * The gpio_desc returned by x86_android_tablet_get_gpiod() is a "raw" - * gpio_desc, that is there is no way to pass lookup-flags like - * GPIO_ACTIVE_LOW. Set the GPIO to 0 here to enable charging since - * the /CE pin is active-low, but not marked as such in the gpio_desc. - */ - gpiod_set_value(gpiod, 0); - - /* OTG pin */ - ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, &gpiod); - if (ret < 0) - return ret; - - gpiod_set_value(gpiod, 0); - - return 0; -} - -static const struct x86_dev_info lenovo_yt3_info __initconst = { - .i2c_client_info = lenovo_yt3_i2c_clients, - .i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients), - .init = lenovo_yt3_init, -}; - -/* Medion Lifetab S10346 tablets have an Android factory img with everything hardcoded */ -static const char * const medion_lifetab_s10346_accel_mount_matrix[] = { - "0", "1", "0", - "1", "0", "0", - "0", "0", "1" -}; - -static const struct property_entry medion_lifetab_s10346_accel_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", medion_lifetab_s10346_accel_mount_matrix), - { } -}; - -static const struct software_node medion_lifetab_s10346_accel_node = { - .properties = medion_lifetab_s10346_accel_props, -}; - -/* Note the LCD panel is mounted upside down, this is correctly indicated in the VBT */ -static const struct property_entry medion_lifetab_s10346_touchscreen_props[] = { - PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), - PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - { } -}; - -static const struct software_node medion_lifetab_s10346_touchscreen_node = { - .properties = medion_lifetab_s10346_touchscreen_props, -}; - -static const struct x86_i2c_client_info medion_lifetab_s10346_i2c_clients[] __initconst = { - { - /* kxtj21009 accel */ - .board_info = { - .type = "kxtj21009", - .addr = 0x0f, - .dev_name = "kxtj21009", - .swnode = &medion_lifetab_s10346_accel_node, - }, - .adapter_path = "\\_SB_.I2C3", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FC:02", - .index = 23, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, { - /* goodix touchscreen */ - .board_info = { - .type = "GDIX1001:00", - .addr = 0x14, - .dev_name = "goodix_ts", - .swnode = &medion_lifetab_s10346_touchscreen_node, - }, - .adapter_path = "\\_SB_.I2C4", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x44, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, -}; - -static struct gpiod_lookup_table medion_lifetab_s10346_goodix_gpios = { - .dev_id = "i2c-goodix_ts", - .table = { - GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), - { } - }, -}; - -static struct gpiod_lookup_table * const medion_lifetab_s10346_gpios[] = { - &medion_lifetab_s10346_goodix_gpios, - NULL -}; - -static const struct x86_dev_info medion_lifetab_s10346_info __initconst = { - .i2c_client_info = medion_lifetab_s10346_i2c_clients, - .i2c_client_count = ARRAY_SIZE(medion_lifetab_s10346_i2c_clients), - .gpiod_lookup_tables = medion_lifetab_s10346_gpios, -}; - -/* Nextbook Ares 8 tablets have an Android factory img with everything hardcoded */ -static const char * const nextbook_ares8_accel_mount_matrix[] = { - "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1" -}; - -static const struct property_entry nextbook_ares8_accel_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", nextbook_ares8_accel_mount_matrix), - { } -}; - -static const struct software_node nextbook_ares8_accel_node = { - .properties = nextbook_ares8_accel_props, -}; - -static const struct property_entry nextbook_ares8_touchscreen_props[] = { - PROPERTY_ENTRY_U32("touchscreen-size-x", 800), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), - { } -}; - -static const struct software_node nextbook_ares8_touchscreen_node = { - .properties = nextbook_ares8_touchscreen_props, -}; - -static const struct x86_i2c_client_info nextbook_ares8_i2c_clients[] __initconst = { - { - /* Freescale MMA8653FC accel */ - .board_info = { - .type = "mma8653", - .addr = 0x1d, - .dev_name = "mma8653", - .swnode = &nextbook_ares8_accel_node, - }, - .adapter_path = "\\_SB_.I2C3", - }, { - /* FT5416DQ9 touchscreen controller */ - .board_info = { - .type = "edt-ft5x06", - .addr = 0x38, - .dev_name = "ft5416", - .swnode = &nextbook_ares8_touchscreen_node, - }, - .adapter_path = "\\_SB_.I2C4", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_GPIOINT, - .chip = "INT33FC:02", - .index = 3, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_LOW, - }, - }, -}; - -static struct gpiod_lookup_table nextbook_ares8_int3496_gpios = { - .dev_id = "intel-int3496", - .table = { - GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 18, "id", GPIO_ACTIVE_HIGH), - { } - }, -}; - -static struct gpiod_lookup_table * const nextbook_ares8_gpios[] = { - &nextbook_ares8_int3496_gpios, - NULL -}; - -static const struct x86_dev_info nextbook_ares8_info __initconst = { - .i2c_client_info = nextbook_ares8_i2c_clients, - .i2c_client_count = ARRAY_SIZE(nextbook_ares8_i2c_clients), - .pdev_info = int3496_pdevs, - .pdev_count = ARRAY_SIZE(int3496_pdevs), - .gpiod_lookup_tables = nextbook_ares8_gpios, - .invalid_aei_gpiochip = "INT33FC:02", -}; - -/* - * Whitelabel (sold as various brands) TM800A550L tablets. - * These tablet's DSDT contains a whole bunch of bogus ACPI I2C devices - * (removed through acpi_quirk_skip_i2c_client_enumeration()) and - * the touchscreen fwnode has the wrong GPIOs. - */ -static const char * const whitelabel_tm800a550l_accel_mount_matrix[] = { - "-1", "0", "0", - "0", "1", "0", - "0", "0", "1" -}; - -static const struct property_entry whitelabel_tm800a550l_accel_props[] = { - PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", whitelabel_tm800a550l_accel_mount_matrix), - { } -}; - -static const struct software_node whitelabel_tm800a550l_accel_node = { - .properties = whitelabel_tm800a550l_accel_props, -}; - -static const struct property_entry whitelabel_tm800a550l_goodix_props[] = { - PROPERTY_ENTRY_STRING("firmware-name", "gt912-tm800a550l.fw"), - PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-tm800a550l.cfg"), - PROPERTY_ENTRY_U32("goodix,main-clk", 54), - { } -}; - -static const struct software_node whitelabel_tm800a550l_goodix_node = { - .properties = whitelabel_tm800a550l_goodix_props, -}; - -static const struct x86_i2c_client_info whitelabel_tm800a550l_i2c_clients[] __initconst = { - { - /* goodix touchscreen */ - .board_info = { - .type = "GDIX1001:00", - .addr = 0x14, - .dev_name = "goodix_ts", - .swnode = &whitelabel_tm800a550l_goodix_node, - }, - .adapter_path = "\\_SB_.I2C2", - .irq_data = { - .type = X86_ACPI_IRQ_TYPE_APIC, - .index = 0x44, - .trigger = ACPI_EDGE_SENSITIVE, - .polarity = ACPI_ACTIVE_HIGH, - }, - }, { - /* kxcj91008 accel */ - .board_info = { - .type = "kxcj91008", - .addr = 0x0f, - .dev_name = "kxcj91008", - .swnode = &whitelabel_tm800a550l_accel_node, - }, - .adapter_path = "\\_SB_.I2C3", - }, -}; - -static struct gpiod_lookup_table whitelabel_tm800a550l_goodix_gpios = { - .dev_id = "i2c-goodix_ts", - .table = { - GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), - { } - }, -}; - -static struct gpiod_lookup_table * const whitelabel_tm800a550l_gpios[] = { - &whitelabel_tm800a550l_goodix_gpios, - NULL -}; - -static const struct x86_dev_info whitelabel_tm800a550l_info __initconst = { - .i2c_client_info = whitelabel_tm800a550l_i2c_clients, - .i2c_client_count = ARRAY_SIZE(whitelabel_tm800a550l_i2c_clients), - .gpiod_lookup_tables = whitelabel_tm800a550l_gpios, -}; - -/* - * If the EFI bootloader is not Xiaomi's own signed Android loader, then the - * Xiaomi Mi Pad 2 X86 tablet sets OSID in the DSDT to 1 (Windows), causing - * a bunch of devices to be hidden. - * - * This takes care of instantiating the hidden devices manually. - */ -static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst = { - { - /* BQ27520 fuel-gauge */ - .board_info = { - .type = "bq27520", - .addr = 0x55, - .dev_name = "bq27520", - .swnode = &fg_bq25890_supply_node, - }, - .adapter_path = "\\_SB_.PCI0.I2C1", - }, { - /* KTD2026 RGB notification LED controller */ - .board_info = { - .type = "ktd2026", - .addr = 0x30, - .dev_name = "ktd2026", - }, - .adapter_path = "\\_SB_.PCI0.I2C3", - }, -}; - -static const struct x86_dev_info xiaomi_mipad2_info __initconst = { - .i2c_client_info = xiaomi_mipad2_i2c_clients, - .i2c_client_count = ARRAY_SIZE(xiaomi_mipad2_i2c_clients), -}; - -static const struct dmi_system_id x86_android_tablet_ids[] __initconst = { - { - /* Advantech MICA-071 */ - .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"), - }, - .driver_data = (void *)&advantech_mica_071_info, - }, - { - /* Asus MeMO Pad 7 ME176C */ - .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"), - }, - .driver_data = (void *)&asus_me176c_info, - }, - { - /* Asus TF103C */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), - }, - .driver_data = (void *)&asus_tf103c_info, - }, - { - /* Chuwi Hi8 (CWI509) */ - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), - DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), - DMI_MATCH(DMI_SYS_VENDOR, "ilife"), - DMI_MATCH(DMI_PRODUCT_NAME, "S806"), - }, - .driver_data = (void *)&chuwi_hi8_info, - }, - { - /* CZC P10T */ - .ident = "CZC ODEON TPC-10 (\"P10T\")", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "CZC"), - DMI_MATCH(DMI_PRODUCT_NAME, "ODEON*TPC-10"), - }, - .driver_data = (void *)&czc_p10t, - }, - { - /* CZC P10T variant */ - .ident = "ViewSonic ViewPad 10", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ViewSonic"), - DMI_MATCH(DMI_PRODUCT_NAME, "VPAD10"), - }, - .driver_data = (void *)&czc_p10t, - }, - { - /* Lenovo Yoga Book X90F / X91F / X91L */ - .matches = { - /* Non exact match to match all versions */ - DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"), - }, - .driver_data = (void *)&lenovo_yogabook_x9x_info, - }, - { - /* - * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10" - * Lenovo Yoga Tablet 2 use the same mainboard) - */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), - DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), - DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), - /* Partial match on beginning of BIOS version */ - DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"), - }, - .driver_data = (void *)&lenovo_yoga_tab2_830_1050_info, - }, - { - /* Lenovo Yoga Tab 3 Pro YT3-X90F */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), - }, - .driver_data = (void *)&lenovo_yt3_info, - }, - { - /* Medion Lifetab S10346 */ - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), - /* Above strings are much too generic, also match on BIOS date */ - DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), - }, - .driver_data = (void *)&medion_lifetab_s10346_info, - }, - { - /* Nextbook Ares 8 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), - DMI_MATCH(DMI_PRODUCT_NAME, "M890BAP"), - }, - .driver_data = (void *)&nextbook_ares8_info, - }, - { - /* Whitelabel (sold as various brands) TM800A550L */ - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), - /* Above strings are too generic, also match on BIOS version */ - DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), - }, - .driver_data = (void *)&whitelabel_tm800a550l_info, - }, - { - /* Xiaomi Mi Pad 2 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), - DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), - }, - .driver_data = (void *)&xiaomi_mipad2_info, - }, - { } -}; -MODULE_DEVICE_TABLE(dmi, x86_android_tablet_ids); - -static int i2c_client_count; -static int pdev_count; -static int serdev_count; -static struct i2c_client **i2c_clients; -static struct platform_device **pdevs; -static struct serdev_device **serdevs; -static struct gpiod_lookup_table * const *gpiod_lookup_tables; -static const struct software_node *bat_swnode; -static void (*exit_handler)(void); - -static __init int x86_instantiate_i2c_client(const struct x86_dev_info *dev_info, - int idx) -{ - const struct x86_i2c_client_info *client_info = &dev_info->i2c_client_info[idx]; - struct i2c_board_info board_info = client_info->board_info; - struct i2c_adapter *adap; - acpi_handle handle; - acpi_status status; - - board_info.irq = x86_acpi_irq_helper_get(&client_info->irq_data); - if (board_info.irq < 0) - return board_info.irq; - - status = acpi_get_handle(NULL, client_info->adapter_path, &handle); - if (ACPI_FAILURE(status)) { - pr_err("Error could not get %s handle\n", client_info->adapter_path); - return -ENODEV; - } - - adap = i2c_acpi_find_adapter_by_handle(handle); - if (!adap) { - pr_err("error could not get %s adapter\n", client_info->adapter_path); - return -ENODEV; - } - - i2c_clients[idx] = i2c_new_client_device(adap, &board_info); - put_device(&adap->dev); - if (IS_ERR(i2c_clients[idx])) - return dev_err_probe(&adap->dev, PTR_ERR(i2c_clients[idx]), - "creating I2C-client %d\n", idx); - - return 0; -} - -static __init int x86_instantiate_serdev(const struct x86_serdev_info *info, int idx) -{ - struct acpi_device *ctrl_adev, *serdev_adev; - struct serdev_device *serdev; - struct device *ctrl_dev; - int ret = -ENODEV; - - ctrl_adev = acpi_dev_get_first_match_dev(info->ctrl_hid, info->ctrl_uid, -1); - if (!ctrl_adev) { - pr_err("error could not get %s/%s ctrl adev\n", - info->ctrl_hid, info->ctrl_uid); - return -ENODEV; - } - - serdev_adev = acpi_dev_get_first_match_dev(info->serdev_hid, NULL, -1); - if (!serdev_adev) { - pr_err("error could not get %s serdev adev\n", info->serdev_hid); - goto put_ctrl_adev; - } - - /* get_first_physical_node() returns a weak ref, no need to put() it */ - ctrl_dev = acpi_get_first_physical_node(ctrl_adev); - if (!ctrl_dev) { - pr_err("error could not get %s/%s ctrl physical dev\n", - info->ctrl_hid, info->ctrl_uid); - goto put_serdev_adev; - } - - /* ctrl_dev now points to the controller's parent, get the controller */ - ctrl_dev = device_find_child_by_name(ctrl_dev, info->ctrl_devname); - if (!ctrl_dev) { - pr_err("error could not get %s/%s %s ctrl dev\n", - info->ctrl_hid, info->ctrl_uid, info->ctrl_devname); - goto put_serdev_adev; - } - - serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); - if (!serdev) { - ret = -ENOMEM; - goto put_serdev_adev; - } - - ACPI_COMPANION_SET(&serdev->dev, serdev_adev); - acpi_device_set_enumerated(serdev_adev); - - ret = serdev_device_add(serdev); - if (ret) { - dev_err(&serdev->dev, "error %d adding serdev\n", ret); - serdev_device_put(serdev); - goto put_serdev_adev; - } - - serdevs[idx] = serdev; - -put_serdev_adev: - acpi_dev_put(serdev_adev); -put_ctrl_adev: - acpi_dev_put(ctrl_adev); - return ret; -} - -static void x86_android_tablet_cleanup(void) -{ - int i; - - for (i = 0; i < serdev_count; i++) { - if (serdevs[i]) - serdev_device_remove(serdevs[i]); - } - - kfree(serdevs); - - for (i = 0; i < pdev_count; i++) - platform_device_unregister(pdevs[i]); - - kfree(pdevs); - - for (i = 0; i < i2c_client_count; i++) - i2c_unregister_device(i2c_clients[i]); - - kfree(i2c_clients); - - if (exit_handler) - exit_handler(); - - for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) - gpiod_remove_lookup_table(gpiod_lookup_tables[i]); - - software_node_unregister(bat_swnode); -} - -static __init int x86_android_tablet_init(void) -{ - const struct x86_dev_info *dev_info; - const struct dmi_system_id *id; - struct gpio_chip *chip; - int i, ret = 0; - - id = dmi_first_match(x86_android_tablet_ids); - if (!id) - return -ENODEV; - - dev_info = id->driver_data; - - /* - * The broken DSDTs on these devices often also include broken - * _AEI (ACPI Event Interrupt) handlers, disable these. - */ - if (dev_info->invalid_aei_gpiochip) { - chip = gpiochip_find(dev_info->invalid_aei_gpiochip, - gpiochip_find_match_label); - if (!chip) { - pr_err("error cannot find GPIO chip %s\n", dev_info->invalid_aei_gpiochip); - return -ENODEV; - } - acpi_gpiochip_free_interrupts(chip); - } - - /* - * Since this runs from module_init() it cannot use -EPROBE_DEFER, - * instead pre-load any modules which are listed as requirements. - */ - for (i = 0; dev_info->modules && dev_info->modules[i]; i++) - request_module(dev_info->modules[i]); - - bat_swnode = dev_info->bat_swnode; - if (bat_swnode) { - ret = software_node_register(bat_swnode); - if (ret) - return ret; - } - - gpiod_lookup_tables = dev_info->gpiod_lookup_tables; - for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) - gpiod_add_lookup_table(gpiod_lookup_tables[i]); - - if (dev_info->init) { - ret = dev_info->init(); - if (ret < 0) { - x86_android_tablet_cleanup(); - return ret; - } - exit_handler = dev_info->exit; - } - - i2c_clients = kcalloc(dev_info->i2c_client_count, sizeof(*i2c_clients), GFP_KERNEL); - if (!i2c_clients) { - x86_android_tablet_cleanup(); - return -ENOMEM; - } - - i2c_client_count = dev_info->i2c_client_count; - for (i = 0; i < i2c_client_count; i++) { - ret = x86_instantiate_i2c_client(dev_info, i); - if (ret < 0) { - x86_android_tablet_cleanup(); - return ret; - } - } - - pdevs = kcalloc(dev_info->pdev_count, sizeof(*pdevs), GFP_KERNEL); - if (!pdevs) { - x86_android_tablet_cleanup(); - return -ENOMEM; - } - - pdev_count = dev_info->pdev_count; - for (i = 0; i < pdev_count; i++) { - pdevs[i] = platform_device_register_full(&dev_info->pdev_info[i]); - if (IS_ERR(pdevs[i])) { - x86_android_tablet_cleanup(); - return PTR_ERR(pdevs[i]); - } - } - - serdevs = kcalloc(dev_info->serdev_count, sizeof(*serdevs), GFP_KERNEL); - if (!serdevs) { - x86_android_tablet_cleanup(); - return -ENOMEM; - } - - serdev_count = dev_info->serdev_count; - for (i = 0; i < serdev_count; i++) { - ret = x86_instantiate_serdev(&dev_info->serdev_info[i], i); - if (ret < 0) { - x86_android_tablet_cleanup(); - return ret; - } - } - - return 0; -} - -module_init(x86_android_tablet_init); -module_exit(x86_android_tablet_cleanup); - -MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); -MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/x86-android-tablets/Kconfig b/drivers/platform/x86/x86-android-tablets/Kconfig new file mode 100644 index 000000000000..6603461d4273 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/Kconfig @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# X86 Android tablet support Kconfig +# + +config X86_ANDROID_TABLETS + tristate "X86 Android tablet support" + depends on I2C && SPI && SERIAL_DEV_BUS && ACPI && EFI && GPIOLIB && PMIC_OPREGION + help + X86 tablets which ship with Android as (part of) the factory image + typically have various problems with their DSDTs. The factory kernels + shipped on these devices typically have device addresses and GPIOs + hardcoded in the kernel, rather than specified in their DSDT. + + With the DSDT containing a random collection of devices which may or + may not actually be present. This driver contains various fixes for + such tablets, including instantiating kernel devices for devices which + are missing from the DSDT. + + If you have a x86 Android tablet say Y or M here, for a generic x86 + distro config say M here. diff --git a/drivers/platform/x86/x86-android-tablets/Makefile b/drivers/platform/x86/x86-android-tablets/Makefile new file mode 100644 index 000000000000..41ece5a37137 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# X86 Android tablet support Makefile +# + +obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets.o + +x86-android-tablets-y := core.o dmi.o shared-psy-info.o \ + asus.o lenovo.o other.o diff --git a/drivers/platform/x86/x86-android-tablets/asus.c b/drivers/platform/x86/x86-android-tablets/asus.c new file mode 100644 index 000000000000..cfa038b44b43 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/asus.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Board info for Asus X86 tablets which ship with Android as the factory image + * and which have broken DSDT tables. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/gpio/machine.h> +#include <linux/input.h> +#include <linux/platform_device.h> + +#include "shared-psy-info.h" +#include "x86-android-tablets.h" + +/* Asus ME176C and TF103C tablets shared data */ +static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = { + .dev_id = "intel-int3496", + .table = { + GPIO_LOOKUP("INT33FC:02", 22, "id", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct x86_gpio_button asus_me176c_tf103c_lid = { + .button = { + .code = SW_LID, + .active_low = true, + .desc = "lid_sw", + .type = EV_SW, + .wakeup = true, + .debounce_interval = 50, + }, + .chip = "INT33FC:02", + .pin = 12, +}; + +/* Asus ME176C tablets have an Android factory img with everything hardcoded */ +static const char * const asus_me176c_accel_mount_matrix[] = { + "-1", "0", "0", + "0", "1", "0", + "0", "0", "1" +}; + +static const struct property_entry asus_me176c_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_me176c_accel_mount_matrix), + { } +}; + +static const struct software_node asus_me176c_accel_node = { + .properties = asus_me176c_accel_props, +}; + +static const struct property_entry asus_me176c_bq24190_props[] = { + PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", tusb1211_chg_det_psy, 1), + PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), + PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), + PROPERTY_ENTRY_BOOL("omit-battery-class"), + PROPERTY_ENTRY_BOOL("disable-reset"), + { } +}; + +static const struct software_node asus_me176c_bq24190_node = { + .properties = asus_me176c_bq24190_props, +}; + +static const struct property_entry asus_me176c_ug3105_props[] = { + PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", bq24190_psy, 1), + PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), + PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 10000), + { } +}; + +static const struct software_node asus_me176c_ug3105_node = { + .properties = asus_me176c_ug3105_props, +}; + +static const struct x86_i2c_client_info asus_me176c_i2c_clients[] __initconst = { + { + /* bq24297 battery charger */ + .board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24297", + .swnode = &asus_me176c_bq24190_node, + .platform_data = &bq24190_pdata, + }, + .adapter_path = "\\_SB_.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_PMIC, + .chip = "\\_SB_.I2C7.PMIC", + .domain = DOMAIN_BUS_WAKEUP, + .index = 0, + }, + }, { + /* ug3105 battery monitor */ + .board_info = { + .type = "ug3105", + .addr = 0x70, + .dev_name = "ug3105", + .swnode = &asus_me176c_ug3105_node, + }, + .adapter_path = "\\_SB_.I2C1", + }, { + /* ak09911 compass */ + .board_info = { + .type = "ak09911", + .addr = 0x0c, + .dev_name = "ak09911", + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &asus_me176c_accel_node, + }, + .adapter_path = "\\_SB_.I2C5", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + }, + .adapter_path = "\\_SB_.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x45, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static const struct x86_serdev_info asus_me176c_serdevs[] __initconst = { + { + .ctrl_hid = "80860F0A", + .ctrl_uid = "2", + .ctrl_devname = "serial0", + .serdev_hid = "BCM2E3A", + }, +}; + +static struct gpiod_lookup_table asus_me176c_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 28, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table * const asus_me176c_gpios[] = { + &int3496_gpo2_pin22_gpios, + &asus_me176c_goodix_gpios, + NULL +}; + +const struct x86_dev_info asus_me176c_info __initconst = { + .i2c_client_info = asus_me176c_i2c_clients, + .i2c_client_count = ARRAY_SIZE(asus_me176c_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = 1, + .serdev_info = asus_me176c_serdevs, + .serdev_count = ARRAY_SIZE(asus_me176c_serdevs), + .gpio_button = &asus_me176c_tf103c_lid, + .gpiod_lookup_tables = asus_me176c_gpios, + .bat_swnode = &generic_lipo_hv_4v35_battery_node, + .modules = bq24190_modules, + .invalid_aei_gpiochip = "INT33FC:02", +}; + +/* Asus TF103C tablets have an Android factory img with everything hardcoded */ +static const char * const asus_tf103c_accel_mount_matrix[] = { + "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry asus_tf103c_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_tf103c_accel_mount_matrix), + { } +}; + +static const struct software_node asus_tf103c_accel_node = { + .properties = asus_tf103c_accel_props, +}; + +static const struct property_entry asus_tf103c_touchscreen_props[] = { + PROPERTY_ENTRY_STRING("compatible", "atmel,atmel_mxt_ts"), + { } +}; + +static const struct software_node asus_tf103c_touchscreen_node = { + .properties = asus_tf103c_touchscreen_props, +}; + +static const struct property_entry asus_tf103c_battery_props[] = { + PROPERTY_ENTRY_STRING("compatible", "simple-battery"), + PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion-polymer"), + PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), + PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), + PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 2048000), + PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4208000), + PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), + { } +}; + +static const struct software_node asus_tf103c_battery_node = { + .properties = asus_tf103c_battery_props, +}; + +static const struct property_entry asus_tf103c_bq24190_props[] = { + PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", tusb1211_chg_det_psy, 1), + PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), + PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), + PROPERTY_ENTRY_BOOL("omit-battery-class"), + PROPERTY_ENTRY_BOOL("disable-reset"), + { } +}; + +static const struct software_node asus_tf103c_bq24190_node = { + .properties = asus_tf103c_bq24190_props, +}; + +static const struct property_entry asus_tf103c_ug3105_props[] = { + PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", bq24190_psy, 1), + PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), + PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 5000), + { } +}; + +static const struct software_node asus_tf103c_ug3105_node = { + .properties = asus_tf103c_ug3105_props, +}; + +static const struct x86_i2c_client_info asus_tf103c_i2c_clients[] __initconst = { + { + /* bq24297 battery charger */ + .board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24297", + .swnode = &asus_tf103c_bq24190_node, + .platform_data = &bq24190_pdata, + }, + .adapter_path = "\\_SB_.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_PMIC, + .chip = "\\_SB_.I2C7.PMIC", + .domain = DOMAIN_BUS_WAKEUP, + .index = 0, + }, + }, { + /* ug3105 battery monitor */ + .board_info = { + .type = "ug3105", + .addr = 0x70, + .dev_name = "ug3105", + .swnode = &asus_tf103c_ug3105_node, + }, + .adapter_path = "\\_SB_.I2C1", + }, { + /* ak09911 compass */ + .board_info = { + .type = "ak09911", + .addr = 0x0c, + .dev_name = "ak09911", + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &asus_tf103c_accel_node, + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* atmel touchscreen */ + .board_info = { + .type = "atmel_mxt_ts", + .addr = 0x4a, + .dev_name = "atmel_mxt_ts", + .swnode = &asus_tf103c_touchscreen_node, + }, + .adapter_path = "\\_SB_.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 28, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static struct gpiod_lookup_table * const asus_tf103c_gpios[] = { + &int3496_gpo2_pin22_gpios, + NULL +}; + +const struct x86_dev_info asus_tf103c_info __initconst = { + .i2c_client_info = asus_tf103c_i2c_clients, + .i2c_client_count = ARRAY_SIZE(asus_tf103c_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = 1, + .gpio_button = &asus_me176c_tf103c_lid, + .gpiod_lookup_tables = asus_tf103c_gpios, + .bat_swnode = &asus_tf103c_battery_node, + .modules = bq24190_modules, + .invalid_aei_gpiochip = "INT33FC:02", +}; diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c new file mode 100644 index 000000000000..245167674aa2 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/core.c @@ -0,0 +1,391 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DMI based code to deal with broken DSDTs on X86 tablets which ship with + * Android as (part of) the factory image. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/serdev.h> +#include <linux/string.h> + +#include "x86-android-tablets.h" +/* For gpiochip_get_desc() which is EXPORT_SYMBOL_GPL() */ +#include "../../../gpio/gpiolib.h" +#include "../../../gpio/gpiolib-acpi.h" + +static int gpiochip_find_match_label(struct gpio_chip *gc, void *data) +{ + return gc->label && !strcmp(gc->label, data); +} + +int x86_android_tablet_get_gpiod(const char *label, int pin, struct gpio_desc **desc) +{ + struct gpio_desc *gpiod; + struct gpio_chip *chip; + + chip = gpiochip_find((void *)label, gpiochip_find_match_label); + if (!chip) { + pr_err("error cannot find GPIO chip %s\n", label); + return -ENODEV; + } + + gpiod = gpiochip_get_desc(chip, pin); + if (IS_ERR(gpiod)) { + pr_err("error %ld getting GPIO %s %d\n", PTR_ERR(gpiod), label, pin); + return PTR_ERR(gpiod); + } + + *desc = gpiod; + return 0; +} + +int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data) +{ + struct irq_fwspec fwspec = { }; + struct irq_domain *domain; + struct acpi_device *adev; + struct gpio_desc *gpiod; + unsigned int irq_type; + acpi_handle handle; + acpi_status status; + int irq, ret; + + switch (data->type) { + case X86_ACPI_IRQ_TYPE_APIC: + /* + * The DSDT may already reference the GSI in a device skipped by + * acpi_quirk_skip_i2c_client_enumeration(). Unregister the GSI + * to avoid EBUSY errors in this case. + */ + acpi_unregister_gsi(data->index); + irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity); + if (irq < 0) + pr_err("error %d getting APIC IRQ %d\n", irq, data->index); + + return irq; + case X86_ACPI_IRQ_TYPE_GPIOINT: + /* Like acpi_dev_gpio_irq_get(), but without parsing ACPI resources */ + ret = x86_android_tablet_get_gpiod(data->chip, data->index, &gpiod); + if (ret) + return ret; + + irq = gpiod_to_irq(gpiod); + if (irq < 0) { + pr_err("error %d getting IRQ %s %d\n", irq, data->chip, data->index); + return irq; + } + + irq_type = acpi_dev_get_irq_type(data->trigger, data->polarity); + if (irq_type != IRQ_TYPE_NONE && irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + + return irq; + case X86_ACPI_IRQ_TYPE_PMIC: + status = acpi_get_handle(NULL, data->chip, &handle); + if (ACPI_FAILURE(status)) { + pr_err("error could not get %s handle\n", data->chip); + return -ENODEV; + } + + adev = acpi_fetch_acpi_dev(handle); + if (!adev) { + pr_err("error could not get %s adev\n", data->chip); + return -ENODEV; + } + + fwspec.fwnode = acpi_fwnode_handle(adev); + domain = irq_find_matching_fwspec(&fwspec, data->domain); + if (!domain) { + pr_err("error could not find IRQ domain for %s\n", data->chip); + return -ENODEV; + } + + return irq_create_mapping(domain, data->index); + default: + return 0; + } +} + +static int i2c_client_count; +static int pdev_count; +static int serdev_count; +static struct i2c_client **i2c_clients; +static struct platform_device **pdevs; +static struct serdev_device **serdevs; +static struct gpiod_lookup_table * const *gpiod_lookup_tables; +static const struct software_node *bat_swnode; +static void (*exit_handler)(void); + +static __init int x86_instantiate_i2c_client(const struct x86_dev_info *dev_info, + int idx) +{ + const struct x86_i2c_client_info *client_info = &dev_info->i2c_client_info[idx]; + struct i2c_board_info board_info = client_info->board_info; + struct i2c_adapter *adap; + acpi_handle handle; + acpi_status status; + + board_info.irq = x86_acpi_irq_helper_get(&client_info->irq_data); + if (board_info.irq < 0) + return board_info.irq; + + status = acpi_get_handle(NULL, client_info->adapter_path, &handle); + if (ACPI_FAILURE(status)) { + pr_err("Error could not get %s handle\n", client_info->adapter_path); + return -ENODEV; + } + + adap = i2c_acpi_find_adapter_by_handle(handle); + if (!adap) { + pr_err("error could not get %s adapter\n", client_info->adapter_path); + return -ENODEV; + } + + i2c_clients[idx] = i2c_new_client_device(adap, &board_info); + put_device(&adap->dev); + if (IS_ERR(i2c_clients[idx])) + return dev_err_probe(&adap->dev, PTR_ERR(i2c_clients[idx]), + "creating I2C-client %d\n", idx); + + return 0; +} + +static __init int x86_instantiate_serdev(const struct x86_serdev_info *info, int idx) +{ + struct acpi_device *ctrl_adev, *serdev_adev; + struct serdev_device *serdev; + struct device *ctrl_dev; + int ret = -ENODEV; + + ctrl_adev = acpi_dev_get_first_match_dev(info->ctrl_hid, info->ctrl_uid, -1); + if (!ctrl_adev) { + pr_err("error could not get %s/%s ctrl adev\n", + info->ctrl_hid, info->ctrl_uid); + return -ENODEV; + } + + serdev_adev = acpi_dev_get_first_match_dev(info->serdev_hid, NULL, -1); + if (!serdev_adev) { + pr_err("error could not get %s serdev adev\n", info->serdev_hid); + goto put_ctrl_adev; + } + + /* get_first_physical_node() returns a weak ref, no need to put() it */ + ctrl_dev = acpi_get_first_physical_node(ctrl_adev); + if (!ctrl_dev) { + pr_err("error could not get %s/%s ctrl physical dev\n", + info->ctrl_hid, info->ctrl_uid); + goto put_serdev_adev; + } + + /* ctrl_dev now points to the controller's parent, get the controller */ + ctrl_dev = device_find_child_by_name(ctrl_dev, info->ctrl_devname); + if (!ctrl_dev) { + pr_err("error could not get %s/%s %s ctrl dev\n", + info->ctrl_hid, info->ctrl_uid, info->ctrl_devname); + goto put_serdev_adev; + } + + serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); + if (!serdev) { + ret = -ENOMEM; + goto put_serdev_adev; + } + + ACPI_COMPANION_SET(&serdev->dev, serdev_adev); + acpi_device_set_enumerated(serdev_adev); + + ret = serdev_device_add(serdev); + if (ret) { + dev_err(&serdev->dev, "error %d adding serdev\n", ret); + serdev_device_put(serdev); + goto put_serdev_adev; + } + + serdevs[idx] = serdev; + +put_serdev_adev: + acpi_dev_put(serdev_adev); +put_ctrl_adev: + acpi_dev_put(ctrl_adev); + return ret; +} + +static void x86_android_tablet_cleanup(void) +{ + int i; + + for (i = 0; i < serdev_count; i++) { + if (serdevs[i]) + serdev_device_remove(serdevs[i]); + } + + kfree(serdevs); + + for (i = 0; i < pdev_count; i++) + platform_device_unregister(pdevs[i]); + + kfree(pdevs); + + for (i = 0; i < i2c_client_count; i++) + i2c_unregister_device(i2c_clients[i]); + + kfree(i2c_clients); + + if (exit_handler) + exit_handler(); + + for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) + gpiod_remove_lookup_table(gpiod_lookup_tables[i]); + + software_node_unregister(bat_swnode); +} + +static __init int x86_android_tablet_init(void) +{ + const struct x86_dev_info *dev_info; + const struct dmi_system_id *id; + struct gpio_chip *chip; + int i, ret = 0; + + id = dmi_first_match(x86_android_tablet_ids); + if (!id) + return -ENODEV; + + dev_info = id->driver_data; + + /* + * The broken DSDTs on these devices often also include broken + * _AEI (ACPI Event Interrupt) handlers, disable these. + */ + if (dev_info->invalid_aei_gpiochip) { + chip = gpiochip_find(dev_info->invalid_aei_gpiochip, + gpiochip_find_match_label); + if (!chip) { + pr_err("error cannot find GPIO chip %s\n", dev_info->invalid_aei_gpiochip); + return -ENODEV; + } + acpi_gpiochip_free_interrupts(chip); + } + + /* + * Since this runs from module_init() it cannot use -EPROBE_DEFER, + * instead pre-load any modules which are listed as requirements. + */ + for (i = 0; dev_info->modules && dev_info->modules[i]; i++) + request_module(dev_info->modules[i]); + + bat_swnode = dev_info->bat_swnode; + if (bat_swnode) { + ret = software_node_register(bat_swnode); + if (ret) + return ret; + } + + gpiod_lookup_tables = dev_info->gpiod_lookup_tables; + for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) + gpiod_add_lookup_table(gpiod_lookup_tables[i]); + + if (dev_info->init) { + ret = dev_info->init(); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + exit_handler = dev_info->exit; + } + + i2c_clients = kcalloc(dev_info->i2c_client_count, sizeof(*i2c_clients), GFP_KERNEL); + if (!i2c_clients) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + i2c_client_count = dev_info->i2c_client_count; + for (i = 0; i < i2c_client_count; i++) { + ret = x86_instantiate_i2c_client(dev_info, i); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + } + + /* + 1 to make space for (optional) gpio_keys_button pdev */ + pdevs = kcalloc(dev_info->pdev_count + 1, sizeof(*pdevs), GFP_KERNEL); + if (!pdevs) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + pdev_count = dev_info->pdev_count; + for (i = 0; i < pdev_count; i++) { + pdevs[i] = platform_device_register_full(&dev_info->pdev_info[i]); + if (IS_ERR(pdevs[i])) { + x86_android_tablet_cleanup(); + return PTR_ERR(pdevs[i]); + } + } + + serdevs = kcalloc(dev_info->serdev_count, sizeof(*serdevs), GFP_KERNEL); + if (!serdevs) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + serdev_count = dev_info->serdev_count; + for (i = 0; i < serdev_count; i++) { + ret = x86_instantiate_serdev(&dev_info->serdev_info[i], i); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + } + + if (dev_info->gpio_button) { + struct gpio_keys_platform_data pdata = { + .buttons = &dev_info->gpio_button->button, + .nbuttons = 1, + }; + struct gpio_desc *gpiod; + + /* Get GPIO for the gpio-button */ + ret = x86_android_tablet_get_gpiod(dev_info->gpio_button->chip, + dev_info->gpio_button->pin, &gpiod); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + + dev_info->gpio_button->button.gpio = desc_to_gpio(gpiod); + + pdevs[pdev_count] = platform_device_register_data(NULL, "gpio-keys", + PLATFORM_DEVID_AUTO, + &pdata, sizeof(pdata)); + if (IS_ERR(pdevs[pdev_count])) { + x86_android_tablet_cleanup(); + return PTR_ERR(pdevs[pdev_count]); + } + pdev_count++; + } + + return 0; +} + +module_init(x86_android_tablet_init); +module_exit(x86_android_tablet_cleanup); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c new file mode 100644 index 000000000000..23e640b7003d --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/dmi.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DMI based code to deal with broken DSDTs on X86 tablets which ship with + * Android as (part of) the factory image. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/dmi.h> +#include <linux/init.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +#include "x86-android-tablets.h" + +const struct dmi_system_id x86_android_tablet_ids[] __initconst = { + { + /* Acer Iconia One 7 B1-750 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "VESPA2"), + }, + .driver_data = (void *)&acer_b1_750_info, + }, + { + /* Advantech MICA-071 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"), + }, + .driver_data = (void *)&advantech_mica_071_info, + }, + { + /* Asus MeMO Pad 7 ME176C */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"), + }, + .driver_data = (void *)&asus_me176c_info, + }, + { + /* Asus TF103C */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), + }, + .driver_data = (void *)&asus_tf103c_info, + }, + { + /* Chuwi Hi8 (CWI509) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), + DMI_MATCH(DMI_SYS_VENDOR, "ilife"), + DMI_MATCH(DMI_PRODUCT_NAME, "S806"), + }, + .driver_data = (void *)&chuwi_hi8_info, + }, + { + /* CZC P10T */ + .ident = "CZC ODEON TPC-10 (\"P10T\")", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "CZC"), + DMI_MATCH(DMI_PRODUCT_NAME, "ODEON*TPC-10"), + }, + .driver_data = (void *)&czc_p10t, + }, + { + /* CZC P10T variant */ + .ident = "ViewSonic ViewPad 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ViewSonic"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPAD10"), + }, + .driver_data = (void *)&czc_p10t, + }, + { + /* Lenovo Yoga Book X90F / X90L */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + }, + .driver_data = (void *)&lenovo_yogabook_x90_info, + }, + { + /* Lenovo Yoga Book X91F / X91L */ + .matches = { + /* Non exact match to match F + L versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"), + }, + .driver_data = (void *)&lenovo_yogabook_x91_info, + }, + { + /* + * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10" + * Lenovo Yoga Tablet 2 use the same mainboard) + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), + /* Partial match on beginning of BIOS version */ + DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"), + }, + .driver_data = (void *)&lenovo_yoga_tab2_830_1050_info, + }, + { + /* Lenovo Yoga Tab 3 Pro YT3-X90F */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), + }, + .driver_data = (void *)&lenovo_yt3_info, + }, + { + /* Medion Lifetab S10346 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are much too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), + }, + .driver_data = (void *)&medion_lifetab_s10346_info, + }, + { + /* Nextbook Ares 8 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "M890BAP"), + }, + .driver_data = (void *)&nextbook_ares8_info, + }, + { + /* Peaq C1010 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"), + DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"), + }, + .driver_data = (void *)&peaq_c1010_info, + }, + { + /* Whitelabel (sold as various brands) TM800A550L */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS version */ + DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), + }, + .driver_data = (void *)&whitelabel_tm800a550l_info, + }, + { + /* Xiaomi Mi Pad 2 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), + DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), + }, + .driver_data = (void *)&xiaomi_mipad2_info, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, x86_android_tablet_ids); diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c new file mode 100644 index 000000000000..65cfccaa2894 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c @@ -0,0 +1,679 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Board info for Lenovo X86 tablets which ship with Android as the factory image + * and which have broken DSDT tables. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/efi.h> +#include <linux/gpio/machine.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/platform_data/lp855x.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/rmi.h> +#include <linux/spi/spi.h> + +#include "shared-psy-info.h" +#include "x86-android-tablets.h" + +/* + * Various Lenovo models use a TI LP8557 LED backlight controller with its PWM + * input connected to a PWM output coming from the LCD panel's controller. + * The Android kernels have a hack in the i915 driver to write a non-standard + * panel specific DSI register to set the duty-cycle of the LCD's PWM output. + * + * To avoid having to have a similar hack in the mainline kernel program the + * LP8557 to directly set the level and use the lp855x_bl driver for control. + */ +static struct lp855x_platform_data lenovo_lp8557_pdata = { + .device_control = 0x86, + .initial_brightness = 128, +}; + +/* Lenovo Yoga Book X90F / X90L's Android factory img has everything hardcoded */ + +static const struct property_entry lenovo_yb1_x90_wacom_props[] = { + PROPERTY_ENTRY_U32("hid-descr-addr", 0x0001), + PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 150), + { } +}; + +static const struct software_node lenovo_yb1_x90_wacom_node = { + .properties = lenovo_yb1_x90_wacom_props, +}; + +/* + * The HiDeep IST940E touchscreen comes up in I2C-HID mode. The native protocol + * reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR which are not reported in HID + * mode, so using native mode is preferred. + * It could alternatively be used in HID mode by changing the properties to: + * PROPERTY_ENTRY_U32("hid-descr-addr", 0x0020), + * PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 120), + * and changing board_info.type to "hid-over-i2c". + */ +static const struct property_entry lenovo_yb1_x90_hideep_ts_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 1200), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1920), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 16384), + PROPERTY_ENTRY_BOOL("hideep,force-native-protocol"), + { } +}; + +static const struct software_node lenovo_yb1_x90_hideep_ts_node = { + .properties = lenovo_yb1_x90_hideep_ts_props, +}; + +static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst = { + { + /* BQ27542 fuel-gauge */ + .board_info = { + .type = "bq27542", + .addr = 0x55, + .dev_name = "bq27542", + .swnode = &fg_bq25890_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, { + /* Goodix Touchscreen in keyboard half */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + }, + .adapter_path = "\\_SB_.PCI0.I2C2", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:01", + .index = 56, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* Wacom Digitizer in keyboard half */ + .board_info = { + .type = "hid-over-i2c", + .addr = 0x09, + .dev_name = "wacom", + .swnode = &lenovo_yb1_x90_wacom_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:01", + .index = 49, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* LP8557 Backlight controller */ + .board_info = { + .type = "lp8557", + .addr = 0x2c, + .dev_name = "lp8557", + .platform_data = &lenovo_lp8557_pdata, + }, + .adapter_path = "\\_SB_.PCI0.I2C4", + }, { + /* HiDeep IST940E Touchscreen in display half */ + .board_info = { + .type = "hideep_ts", + .addr = 0x6c, + .dev_name = "hideep_ts", + .swnode = &lenovo_yb1_x90_hideep_ts_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:03", + .index = 77, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static const struct platform_device_info lenovo_yb1_x90_pdevs[] __initconst = { + { + .name = "yogabook-touch-kbd-digitizer-switch", + .id = PLATFORM_DEVID_NONE, + }, +}; + +static struct gpiod_lookup_table lenovo_yb1_x90_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FF:01", 53, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FF:01", 56, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table lenovo_yb1_x90_hideep_gpios = { + .dev_id = "i2c-hideep_ts", + .table = { + GPIO_LOOKUP("INT33FF:00", 7, "reset", GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct gpiod_lookup_table lenovo_yb1_x90_wacom_gpios = { + .dev_id = "i2c-wacom", + .table = { + GPIO_LOOKUP("INT33FF:00", 82, "reset", GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct gpiod_lookup_table * const lenovo_yb1_x90_gpios[] = { + &lenovo_yb1_x90_hideep_gpios, + &lenovo_yb1_x90_goodix_gpios, + &lenovo_yb1_x90_wacom_gpios, + NULL +}; + +static int __init lenovo_yb1_x90_init(void) +{ + /* Enable the regulators used by the touchscreens */ + + /* Vprog3B 3.0V used by the goodix touchscreen in the keyboard half */ + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0x9b, 0x02, 0xff); + + /* Vprog4D 3.0V used by the HiDeep touchscreen in the display half */ + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0x9f, 0x02, 0xff); + + /* Vprog5A 1.8V used by the HiDeep touchscreen in the display half */ + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0xa0, 0x02, 0xff); + + /* Vprog5B 1.8V used by the goodix touchscreen in the keyboard half */ + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0xa1, 0x02, 0xff); + + return 0; +} + +const struct x86_dev_info lenovo_yogabook_x90_info __initconst = { + .i2c_client_info = lenovo_yb1_x90_i2c_clients, + .i2c_client_count = ARRAY_SIZE(lenovo_yb1_x90_i2c_clients), + .pdev_info = lenovo_yb1_x90_pdevs, + .pdev_count = ARRAY_SIZE(lenovo_yb1_x90_pdevs), + .gpiod_lookup_tables = lenovo_yb1_x90_gpios, + .init = lenovo_yb1_x90_init, +}; + +/* Lenovo Yoga Book X91F/L Windows tablet needs manual instantiation of the fg client */ +static const struct x86_i2c_client_info lenovo_yogabook_x91_i2c_clients[] __initconst = { + { + /* BQ27542 fuel-gauge */ + .board_info = { + .type = "bq27542", + .addr = 0x55, + .dev_name = "bq27542", + .swnode = &fg_bq25890_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, +}; + +const struct x86_dev_info lenovo_yogabook_x91_info __initconst = { + .i2c_client_info = lenovo_yogabook_x91_i2c_clients, + .i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x91_i2c_clients), +}; + +/* Lenovo Yoga Tablet 2 1050F/L's Android factory img has everything hardcoded */ +static const struct property_entry lenovo_yoga_tab2_830_1050_bq24190_props[] = { + PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", tusb1211_chg_det_psy, 1), + PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), + PROPERTY_ENTRY_BOOL("omit-battery-class"), + PROPERTY_ENTRY_BOOL("disable-reset"), + { } +}; + +static const struct software_node lenovo_yoga_tab2_830_1050_bq24190_node = { + .properties = lenovo_yoga_tab2_830_1050_bq24190_props, +}; + +static struct x86_gpio_button lenovo_yoga_tab2_830_1050_lid = { + .button = { + .code = SW_LID, + .active_low = true, + .desc = "lid_sw", + .type = EV_SW, + .wakeup = true, + .debounce_interval = 50, + }, + .chip = "INT33FC:02", + .pin = 26, +}; + +/* This gets filled by lenovo_yoga_tab2_830_1050_init() */ +static struct rmi_device_platform_data lenovo_yoga_tab2_830_1050_rmi_pdata = { }; + +static struct x86_i2c_client_info lenovo_yoga_tab2_830_1050_i2c_clients[] __initdata = { + { + /* + * This must be the first entry because lenovo_yoga_tab2_830_1050_init() + * may update its swnode. LSM303DA accelerometer + magnetometer. + */ + .board_info = { + .type = "lsm303d", + .addr = 0x1d, + .dev_name = "lsm303d", + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* bq24292i battery charger */ + .board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24292i", + .swnode = &lenovo_yoga_tab2_830_1050_bq24190_node, + .platform_data = &bq24190_pdata, + }, + .adapter_path = "\\_SB_.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 2, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* BQ27541 fuel-gauge */ + .board_info = { + .type = "bq27541", + .addr = 0x55, + .dev_name = "bq27541", + .swnode = &fg_bq24190_supply_node, + }, + .adapter_path = "\\_SB_.I2C1", + }, { + /* Synaptics RMI touchscreen */ + .board_info = { + .type = "rmi4_i2c", + .addr = 0x38, + .dev_name = "rmi4_i2c", + .platform_data = &lenovo_yoga_tab2_830_1050_rmi_pdata, + }, + .adapter_path = "\\_SB_.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x45, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* LP8557 Backlight controller */ + .board_info = { + .type = "lp8557", + .addr = 0x2c, + .dev_name = "lp8557", + .platform_data = &lenovo_lp8557_pdata, + }, + .adapter_path = "\\_SB_.I2C3", + }, +}; + +static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_int3496_gpios = { + .dev_id = "intel-int3496", + .table = { + GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("INT33FC:02", 24, "id", GPIO_ACTIVE_HIGH), + { } + }, +}; + +#define LENOVO_YOGA_TAB2_830_1050_CODEC_NAME "spi-10WM5102:00" + +static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_codec_gpios = { + .dev_id = LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, + .table = { + GPIO_LOOKUP("gpio_crystalcove", 3, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:01", 23, "wlf,ldoena", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("arizona", 2, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("arizona", 4, "wlf,micd-pol", GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct gpiod_lookup_table * const lenovo_yoga_tab2_830_1050_gpios[] = { + &lenovo_yoga_tab2_830_1050_int3496_gpios, + &lenovo_yoga_tab2_830_1050_codec_gpios, + NULL +}; + +static int __init lenovo_yoga_tab2_830_1050_init(void); +static void lenovo_yoga_tab2_830_1050_exit(void); + +const struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initconst = { + .i2c_client_info = lenovo_yoga_tab2_830_1050_i2c_clients, + .i2c_client_count = ARRAY_SIZE(lenovo_yoga_tab2_830_1050_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = 1, + .gpio_button = &lenovo_yoga_tab2_830_1050_lid, + .gpiod_lookup_tables = lenovo_yoga_tab2_830_1050_gpios, + .bat_swnode = &generic_lipo_hv_4v35_battery_node, + .modules = bq24190_modules, + .init = lenovo_yoga_tab2_830_1050_init, + .exit = lenovo_yoga_tab2_830_1050_exit, +}; + +/* + * The Lenovo Yoga Tablet 2 830 and 1050 (8" vs 10") versions use the same + * mainboard, but the 830 uses a portrait LCD panel with a landscape touchscreen, + * requiring the touchscreen driver to adjust the touch-coords to match the LCD. + * And requiring the accelerometer to have a mount-matrix set to correct for + * the 90° rotation of the LCD vs the frame. + */ +static const char * const lenovo_yoga_tab2_830_lms303d_mount_matrix[] = { + "0", "1", "0", + "-1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry lenovo_yoga_tab2_830_lms303d_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", lenovo_yoga_tab2_830_lms303d_mount_matrix), + { } +}; + +static const struct software_node lenovo_yoga_tab2_830_lms303d_node = { + .properties = lenovo_yoga_tab2_830_lms303d_props, +}; + +static int __init lenovo_yoga_tab2_830_1050_init_touchscreen(void) +{ + struct gpio_desc *gpiod; + int ret; + + /* Use PMIC GPIO 10 bootstrap pin to differentiate 830 vs 1050 */ + ret = x86_android_tablet_get_gpiod("gpio_crystalcove", 10, &gpiod); + if (ret) + return ret; + + ret = gpiod_get_value_cansleep(gpiod); + if (ret) { + pr_info("detected Lenovo Yoga Tablet 2 1050F/L\n"); + } else { + pr_info("detected Lenovo Yoga Tablet 2 830F/L\n"); + lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.swap_axes = true; + lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.flip_y = true; + lenovo_yoga_tab2_830_1050_i2c_clients[0].board_info.swnode = + &lenovo_yoga_tab2_830_lms303d_node; + } + + return 0; +} + +/* SUS (INT33FC:02) pin 6 needs to be configured as pmu_clk for the audio codec */ +static const struct pinctrl_map lenovo_yoga_tab2_830_1050_codec_pinctrl_map = + PIN_MAP_MUX_GROUP(LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, "codec_32khz_clk", + "INT33FC:02", "pmu_clk2_grp", "pmu_clk"); + +static struct pinctrl *lenovo_yoga_tab2_830_1050_codec_pinctrl; +static struct sys_off_handler *lenovo_yoga_tab2_830_1050_sys_off_handler; + +static int __init lenovo_yoga_tab2_830_1050_init_codec(void) +{ + struct device *codec_dev; + struct pinctrl *pinctrl; + int ret; + + codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, + LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); + if (!codec_dev) { + pr_err("error cannot find %s device\n", LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); + return -ENODEV; + } + + ret = pinctrl_register_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map, 1); + if (ret) + goto err_put_device; + + pinctrl = pinctrl_get_select(codec_dev, "codec_32khz_clk"); + if (IS_ERR(pinctrl)) { + ret = dev_err_probe(codec_dev, PTR_ERR(pinctrl), "selecting codec_32khz_clk\n"); + goto err_unregister_mappings; + } + + /* We're done with the codec_dev now */ + put_device(codec_dev); + + lenovo_yoga_tab2_830_1050_codec_pinctrl = pinctrl; + return 0; + +err_unregister_mappings: + pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); +err_put_device: + put_device(codec_dev); + return ret; +} + +/* + * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off + * gets used as pm_power_off handler. This causes "poweroff" on these tablets + * to hang hard. Requiring pressing the powerbutton for 30 seconds *twice* + * followed by a normal 3 second press to recover. Avoid this by doing an EFI + * poweroff instead. + */ +static int lenovo_yoga_tab2_830_1050_power_off(struct sys_off_data *data) +{ + efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL); + + return NOTIFY_DONE; +} + +static int __init lenovo_yoga_tab2_830_1050_init(void) +{ + int ret; + + ret = lenovo_yoga_tab2_830_1050_init_touchscreen(); + if (ret) + return ret; + + ret = lenovo_yoga_tab2_830_1050_init_codec(); + if (ret) + return ret; + + /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */ + lenovo_yoga_tab2_830_1050_sys_off_handler = + register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1, + lenovo_yoga_tab2_830_1050_power_off, NULL); + if (IS_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler)) + return PTR_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler); + + return 0; +} + +static void lenovo_yoga_tab2_830_1050_exit(void) +{ + unregister_sys_off_handler(lenovo_yoga_tab2_830_1050_sys_off_handler); + + if (lenovo_yoga_tab2_830_1050_codec_pinctrl) { + pinctrl_put(lenovo_yoga_tab2_830_1050_codec_pinctrl); + pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); + } +} + +/* Lenovo Yoga Tab 3 Pro YT3-X90F */ + +/* + * There are 2 batteries, with 2 bq27500 fuel-gauges and 2 bq25892 chargers, + * "bq25890-charger-1" is instantiated from: drivers/i2c/busses/i2c-cht-wc.c. + */ +static const char * const lenovo_yt3_bq25892_0_suppliers[] = { "cht_wcove_pwrsrc" }; +static const char * const bq25890_1_psy[] = { "bq25890-charger-1" }; + +static const struct property_entry fg_bq25890_1_supply_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_1_psy), + { } +}; + +static const struct software_node fg_bq25890_1_supply_node = { + .properties = fg_bq25890_1_supply_props, +}; + +/* bq25892 charger settings for the flat lipo battery behind the screen */ +static const struct property_entry lenovo_yt3_bq25892_0_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), + PROPERTY_ENTRY_STRING("linux,power-supply-name", "bq25892-second-chrg"), + PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* Values taken from Android Factory Image */ + PROPERTY_ENTRY_U32("ti,charge-current", 2048000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 128000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 500000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yt3_bq25892_0_node = { + .properties = lenovo_yt3_bq25892_0_props, +}; + +static const struct property_entry lenovo_yt3_hideep_ts_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 1600), + PROPERTY_ENTRY_U32("touchscreen-size-y", 2560), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 255), + { } +}; + +static const struct software_node lenovo_yt3_hideep_ts_node = { + .properties = lenovo_yt3_hideep_ts_props, +}; + +static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { + { + /* bq27500 fuel-gauge for the flat lipo battery behind the screen */ + .board_info = { + .type = "bq27500", + .addr = 0x55, + .dev_name = "bq27500_0", + .swnode = &fg_bq25890_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, { + /* bq25892 charger for the flat lipo battery behind the screen */ + .board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892_0", + .swnode = &lenovo_yt3_bq25892_0_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:01", + .index = 5, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ + .board_info = { + .type = "bq27500", + .addr = 0x55, + .dev_name = "bq27500_1", + .swnode = &fg_bq25890_1_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C2", + }, { + /* HiDeep IST520E Touchscreen */ + .board_info = { + .type = "hideep_ts", + .addr = 0x6c, + .dev_name = "hideep_ts", + .swnode = &lenovo_yt3_hideep_ts_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:03", + .index = 77, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* LP8557 Backlight controller */ + .board_info = { + .type = "lp8557", + .addr = 0x2c, + .dev_name = "lp8557", + .platform_data = &lenovo_lp8557_pdata, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + } +}; + +static int __init lenovo_yt3_init(void) +{ + struct gpio_desc *gpiod; + int ret; + + /* + * The "bq25892_0" charger IC has its /CE (Charge-Enable) and OTG pins + * connected to GPIOs, rather then having them hardwired to the correct + * values as is normally done. + * + * The bq25890_charger driver controls these through I2C, but this only + * works if not overridden by the pins. Set these pins here: + * 1. Set /CE to 0 to allow charging. + * 2. Set OTG to 0 disable V5 boost output since the 5V boost output of + * the main "bq25892_1" charger is used when necessary. + */ + + /* /CE pin */ + ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, &gpiod); + if (ret < 0) + return ret; + + /* + * The gpio_desc returned by x86_android_tablet_get_gpiod() is a "raw" + * gpio_desc, that is there is no way to pass lookup-flags like + * GPIO_ACTIVE_LOW. Set the GPIO to 0 here to enable charging since + * the /CE pin is active-low, but not marked as such in the gpio_desc. + */ + gpiod_set_value(gpiod, 0); + + /* OTG pin */ + ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, &gpiod); + if (ret < 0) + return ret; + + gpiod_set_value(gpiod, 0); + + /* Enable the regulators used by the touchscreen */ + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0x9b, 0x02, 0xff); + intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0xa0, 0x02, 0xff); + + return 0; +} + +static struct gpiod_lookup_table lenovo_yt3_hideep_gpios = { + .dev_id = "i2c-hideep_ts", + .table = { + GPIO_LOOKUP("INT33FF:00", 7, "reset", GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct gpiod_lookup_table * const lenovo_yt3_gpios[] = { + &lenovo_yt3_hideep_gpios, + NULL +}; + +const struct x86_dev_info lenovo_yt3_info __initconst = { + .i2c_client_info = lenovo_yt3_i2c_clients, + .i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients), + .gpiod_lookup_tables = lenovo_yt3_gpios, + .init = lenovo_yt3_init, +}; diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c new file mode 100644 index 000000000000..83cd7e16c84c --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/other.c @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DMI based code to deal with broken DSDTs on X86 tablets which ship with + * Android as (part of) the factory image. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/acpi.h> +#include <linux/gpio/machine.h> +#include <linux/input.h> +#include <linux/platform_device.h> + +#include "shared-psy-info.h" +#include "x86-android-tablets.h" + +/* Acer Iconia One 7 B1-750 has an Android factory img with everything hardcoded */ +static const char * const acer_b1_750_mount_matrix[] = { + "-1", "0", "0", + "0", "1", "0", + "0", "0", "1" +}; + +static const struct property_entry acer_b1_750_bma250e_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", acer_b1_750_mount_matrix), + { } +}; + +static const struct software_node acer_b1_750_bma250e_node = { + .properties = acer_b1_750_bma250e_props, +}; + +static const struct x86_i2c_client_info acer_b1_750_i2c_clients[] __initconst = { + { + /* Novatek NVT-ts touchscreen */ + .board_info = { + .type = "NVT-ts", + .addr = 0x34, + .dev_name = "NVT-ts", + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 3, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* BMA250E accelerometer */ + .board_info = { + .type = "bma250e", + .addr = 0x18, + .swnode = &acer_b1_750_bma250e_node, + }, + .adapter_path = "\\_SB_.I2C3", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 25, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, +}; + +static struct gpiod_lookup_table acer_b1_750_goodix_gpios = { + .dev_id = "i2c-NVT-ts", + .table = { + GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct gpiod_lookup_table * const acer_b1_750_gpios[] = { + &acer_b1_750_goodix_gpios, + &int3496_reference_gpios, + NULL +}; + +const struct x86_dev_info acer_b1_750_info __initconst = { + .i2c_client_info = acer_b1_750_i2c_clients, + .i2c_client_count = ARRAY_SIZE(acer_b1_750_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = 1, + .gpiod_lookup_tables = acer_b1_750_gpios, +}; + +/* + * Advantech MICA-071 + * This is a standard Windows tablet, but it has an extra "quick launch" button + * which is not described in the ACPI tables in anyway. + * Use the x86-android-tablets infra to create a gpio-button device for this. + */ +static struct x86_gpio_button advantech_mica_071_button = { + .button = { + .code = KEY_PROG1, + .active_low = true, + .desc = "prog1_key", + .type = EV_KEY, + .wakeup = false, + .debounce_interval = 50, + }, + .chip = "INT33FC:00", + .pin = 2, +}; + +const struct x86_dev_info advantech_mica_071_info __initconst = { + .gpio_button = &advantech_mica_071_button, +}; + +/* + * When booted with the BIOS set to Android mode the Chuwi Hi8 (CWI509) DSDT + * contains a whole bunch of bogus ACPI I2C devices and is missing entries + * for the touchscreen and the accelerometer. + */ +static const struct property_entry chuwi_hi8_gsl1680_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 1665), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_BOOL("silead,home-button"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi8.fw"), + { } +}; + +static const struct software_node chuwi_hi8_gsl1680_node = { + .properties = chuwi_hi8_gsl1680_props, +}; + +static const char * const chuwi_hi8_mount_matrix[] = { + "1", "0", "0", + "0", "-1", "0", + "0", "0", "1" +}; + +static const struct property_entry chuwi_hi8_bma250e_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", chuwi_hi8_mount_matrix), + { } +}; + +static const struct software_node chuwi_hi8_bma250e_node = { + .properties = chuwi_hi8_bma250e_props, +}; + +static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = { + { + /* Silead touchscreen */ + .board_info = { + .type = "gsl1680", + .addr = 0x40, + .swnode = &chuwi_hi8_gsl1680_node, + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* BMA250E accelerometer */ + .board_info = { + .type = "bma250e", + .addr = 0x18, + .swnode = &chuwi_hi8_bma250e_node, + }, + .adapter_path = "\\_SB_.I2C3", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 23, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, +}; + +static int __init chuwi_hi8_init(void) +{ + /* + * Avoid the acpi_unregister_gsi() call in x86_acpi_irq_helper_get() + * breaking the touchscreen + logging various errors when the Windows + * BIOS is used. + */ + if (acpi_dev_present("MSSL0001", NULL, 1)) + return -ENODEV; + + return 0; +} + +const struct x86_dev_info chuwi_hi8_info __initconst = { + .i2c_client_info = chuwi_hi8_i2c_clients, + .i2c_client_count = ARRAY_SIZE(chuwi_hi8_i2c_clients), + .init = chuwi_hi8_init, +}; + +#define CZC_EC_EXTRA_PORT 0x68 +#define CZC_EC_ANDROID_KEYS 0x63 + +static int __init czc_p10t_init(void) +{ + /* + * The device boots up in "Windows 7" mode, when the home button sends a + * Windows specific key sequence (Left Meta + D) and the second button + * sends an unknown one while also toggling the Radio Kill Switch. + * This is a surprising behavior when the second button is labeled "Back". + * + * The vendor-supplied Android-x86 build switches the device to a "Android" + * mode by writing value 0x63 to the I/O port 0x68. This just seems to just + * set bit 6 on address 0x96 in the EC region; switching the bit directly + * seems to achieve the same result. It uses a "p10t_switcher" to do the + * job. It doesn't seem to be able to do anything else, and no other use + * of the port 0x68 is known. + * + * In the Android mode, the home button sends just a single scancode, + * which can be handled in Linux userspace more reasonably and the back + * button only sends a scancode without toggling the kill switch. + * The scancode can then be mapped either to Back or RF Kill functionality + * in userspace, depending on how the button is labeled on that particular + * model. + */ + outb(CZC_EC_ANDROID_KEYS, CZC_EC_EXTRA_PORT); + return 0; +} + +const struct x86_dev_info czc_p10t __initconst = { + .init = czc_p10t_init, +}; + +/* Medion Lifetab S10346 tablets have an Android factory img with everything hardcoded */ +static const char * const medion_lifetab_s10346_accel_mount_matrix[] = { + "0", "1", "0", + "1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry medion_lifetab_s10346_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", medion_lifetab_s10346_accel_mount_matrix), + { } +}; + +static const struct software_node medion_lifetab_s10346_accel_node = { + .properties = medion_lifetab_s10346_accel_props, +}; + +/* Note the LCD panel is mounted upside down, this is correctly indicated in the VBT */ +static const struct property_entry medion_lifetab_s10346_touchscreen_props[] = { + PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + { } +}; + +static const struct software_node medion_lifetab_s10346_touchscreen_node = { + .properties = medion_lifetab_s10346_touchscreen_props, +}; + +static const struct x86_i2c_client_info medion_lifetab_s10346_i2c_clients[] __initconst = { + { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &medion_lifetab_s10346_accel_node, + }, + .adapter_path = "\\_SB_.I2C3", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 23, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + .swnode = &medion_lifetab_s10346_touchscreen_node, + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static struct gpiod_lookup_table medion_lifetab_s10346_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table * const medion_lifetab_s10346_gpios[] = { + &medion_lifetab_s10346_goodix_gpios, + NULL +}; + +const struct x86_dev_info medion_lifetab_s10346_info __initconst = { + .i2c_client_info = medion_lifetab_s10346_i2c_clients, + .i2c_client_count = ARRAY_SIZE(medion_lifetab_s10346_i2c_clients), + .gpiod_lookup_tables = medion_lifetab_s10346_gpios, +}; + +/* Nextbook Ares 8 tablets have an Android factory img with everything hardcoded */ +static const char * const nextbook_ares8_accel_mount_matrix[] = { + "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry nextbook_ares8_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", nextbook_ares8_accel_mount_matrix), + { } +}; + +static const struct software_node nextbook_ares8_accel_node = { + .properties = nextbook_ares8_accel_props, +}; + +static const struct property_entry nextbook_ares8_touchscreen_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 800), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), + { } +}; + +static const struct software_node nextbook_ares8_touchscreen_node = { + .properties = nextbook_ares8_touchscreen_props, +}; + +static const struct x86_i2c_client_info nextbook_ares8_i2c_clients[] __initconst = { + { + /* Freescale MMA8653FC accel */ + .board_info = { + .type = "mma8653", + .addr = 0x1d, + .dev_name = "mma8653", + .swnode = &nextbook_ares8_accel_node, + }, + .adapter_path = "\\_SB_.I2C3", + }, { + /* FT5416DQ9 touchscreen controller */ + .board_info = { + .type = "edt-ft5x06", + .addr = 0x38, + .dev_name = "ft5416", + .swnode = &nextbook_ares8_touchscreen_node, + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 3, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static struct gpiod_lookup_table * const nextbook_ares8_gpios[] = { + &int3496_reference_gpios, + NULL +}; + +const struct x86_dev_info nextbook_ares8_info __initconst = { + .i2c_client_info = nextbook_ares8_i2c_clients, + .i2c_client_count = ARRAY_SIZE(nextbook_ares8_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = 1, + .gpiod_lookup_tables = nextbook_ares8_gpios, + .invalid_aei_gpiochip = "INT33FC:02", +}; + +/* + * Peaq C1010 + * This is a standard Windows tablet, but it has a special Dolby button. + * This button has a WMI interface, but that is broken. Instead of trying to + * use the broken WMI interface, instantiate a gpio_keys device for this. + */ +static struct x86_gpio_button peaq_c1010_button = { + .button = { + .code = KEY_SOUND, + .active_low = true, + .desc = "dolby_key", + .type = EV_KEY, + .wakeup = false, + .debounce_interval = 50, + }, + .chip = "INT33FC:00", + .pin = 3, +}; + +const struct x86_dev_info peaq_c1010_info __initconst = { + .gpio_button = &peaq_c1010_button, + /* + * Move the ACPI event handler used by the broken WMI interface out of + * the way. This is the only event handler on INT33FC:00. + */ + .invalid_aei_gpiochip = "INT33FC:00", +}; + +/* + * Whitelabel (sold as various brands) TM800A550L tablets. + * These tablet's DSDT contains a whole bunch of bogus ACPI I2C devices + * (removed through acpi_quirk_skip_i2c_client_enumeration()) and + * the touchscreen fwnode has the wrong GPIOs. + */ +static const char * const whitelabel_tm800a550l_accel_mount_matrix[] = { + "-1", "0", "0", + "0", "1", "0", + "0", "0", "1" +}; + +static const struct property_entry whitelabel_tm800a550l_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", whitelabel_tm800a550l_accel_mount_matrix), + { } +}; + +static const struct software_node whitelabel_tm800a550l_accel_node = { + .properties = whitelabel_tm800a550l_accel_props, +}; + +static const struct property_entry whitelabel_tm800a550l_goodix_props[] = { + PROPERTY_ENTRY_STRING("firmware-name", "gt912-tm800a550l.fw"), + PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-tm800a550l.cfg"), + PROPERTY_ENTRY_U32("goodix,main-clk", 54), + { } +}; + +static const struct software_node whitelabel_tm800a550l_goodix_node = { + .properties = whitelabel_tm800a550l_goodix_props, +}; + +static const struct x86_i2c_client_info whitelabel_tm800a550l_i2c_clients[] __initconst = { + { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + .swnode = &whitelabel_tm800a550l_goodix_node, + }, + .adapter_path = "\\_SB_.I2C2", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* kxcj91008 accel */ + .board_info = { + .type = "kxcj91008", + .addr = 0x0f, + .dev_name = "kxcj91008", + .swnode = &whitelabel_tm800a550l_accel_node, + }, + .adapter_path = "\\_SB_.I2C3", + }, +}; + +static struct gpiod_lookup_table whitelabel_tm800a550l_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table * const whitelabel_tm800a550l_gpios[] = { + &whitelabel_tm800a550l_goodix_gpios, + NULL +}; + +const struct x86_dev_info whitelabel_tm800a550l_info __initconst = { + .i2c_client_info = whitelabel_tm800a550l_i2c_clients, + .i2c_client_count = ARRAY_SIZE(whitelabel_tm800a550l_i2c_clients), + .gpiod_lookup_tables = whitelabel_tm800a550l_gpios, +}; + +/* + * If the EFI bootloader is not Xiaomi's own signed Android loader, then the + * Xiaomi Mi Pad 2 X86 tablet sets OSID in the DSDT to 1 (Windows), causing + * a bunch of devices to be hidden. + * + * This takes care of instantiating the hidden devices manually. + */ +static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst = { + { + /* BQ27520 fuel-gauge */ + .board_info = { + .type = "bq27520", + .addr = 0x55, + .dev_name = "bq27520", + .swnode = &fg_bq25890_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, { + /* KTD2026 RGB notification LED controller */ + .board_info = { + .type = "ktd2026", + .addr = 0x30, + .dev_name = "ktd2026", + }, + .adapter_path = "\\_SB_.PCI0.I2C3", + }, +}; + +const struct x86_dev_info xiaomi_mipad2_info __initconst = { + .i2c_client_info = xiaomi_mipad2_i2c_clients, + .i2c_client_count = ARRAY_SIZE(xiaomi_mipad2_i2c_clients), +}; diff --git a/drivers/platform/x86/x86-android-tablets/shared-psy-info.c b/drivers/platform/x86/x86-android-tablets/shared-psy-info.c new file mode 100644 index 000000000000..d2d0aa51bc3f --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/shared-psy-info.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Shared psy info for X86 tablets which ship with Android as the factory image + * and which have broken DSDT tables. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/gpio/machine.h> +#include <linux/platform_device.h> +#include <linux/power/bq24190_charger.h> +#include <linux/property.h> +#include <linux/regulator/machine.h> + +#include "shared-psy-info.h" + +/* Generic / shared charger / battery settings */ +const char * const tusb1211_chg_det_psy[] = { "tusb1211-charger-detect" }; +const char * const bq24190_psy[] = { "bq24190-charger" }; +const char * const bq25890_psy[] = { "bq25890-charger-0" }; + +static const struct property_entry fg_bq24190_supply_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), + { } +}; + +const struct software_node fg_bq24190_supply_node = { + .properties = fg_bq24190_supply_props, +}; + +static const struct property_entry fg_bq25890_supply_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_psy), + { } +}; + +const struct software_node fg_bq25890_supply_node = { + .properties = fg_bq25890_supply_props, +}; + +/* LiPo HighVoltage (max 4.35V) settings used by most devs with a HV bat. */ +static const struct property_entry generic_lipo_hv_4v35_battery_props[] = { + PROPERTY_ENTRY_STRING("compatible", "simple-battery"), + PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion"), + PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), + PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), + PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 1856000), + PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4352000), + PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), + { } +}; + +const struct software_node generic_lipo_hv_4v35_battery_node = { + .properties = generic_lipo_hv_4v35_battery_props, +}; + +/* For enabling the bq24190 5V boost based on id-pin */ +static struct regulator_consumer_supply intel_int3496_consumer = { + .supply = "vbus", + .dev_name = "intel-int3496", +}; + +static const struct regulator_init_data bq24190_vbus_init_data = { + .constraints = { + .name = "bq24190_vbus", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &intel_int3496_consumer, + .num_consumer_supplies = 1, +}; + +struct bq24190_platform_data bq24190_pdata = { + .regulator_init_data = &bq24190_vbus_init_data, +}; + +const char * const bq24190_modules[] __initconst = { + "intel_crystal_cove_charger", /* For the bq24190 IRQ */ + "bq24190_charger", /* For the Vbus regulator for intel-int3496 */ + NULL +}; + +/* Generic pdevs array and gpio-lookups for micro USB ID pin handling */ +const struct platform_device_info int3496_pdevs[] __initconst = { + { + /* For micro USB ID pin handling */ + .name = "intel-int3496", + .id = PLATFORM_DEVID_NONE, + }, +}; + +struct gpiod_lookup_table int3496_reference_gpios = { + .dev_id = "intel-int3496", + .table = { + GPIO_LOOKUP("INT33FC:01", 15, "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 18, "id", GPIO_ACTIVE_HIGH), + { } + }, +}; diff --git a/drivers/platform/x86/x86-android-tablets/shared-psy-info.h b/drivers/platform/x86/x86-android-tablets/shared-psy-info.h new file mode 100644 index 000000000000..c2d2968cddc2 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/shared-psy-info.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * Shared psy info for X86 tablets which ship with Android as the factory image + * and which have broken DSDT tables. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ +#ifndef __PDX86_SHARED_PSY_INFO_H +#define __PDX86_SHARED_PSY_INFO_H + +struct bq24190_platform_data; +struct gpiod_lookup_table; +struct platform_device_info; +struct software_node; + +extern const char * const tusb1211_chg_det_psy[]; +extern const char * const bq24190_psy[]; +extern const char * const bq25890_psy[]; + +extern const struct software_node fg_bq24190_supply_node; +extern const struct software_node fg_bq25890_supply_node; +extern const struct software_node generic_lipo_hv_4v35_battery_node; + +extern struct bq24190_platform_data bq24190_pdata; +extern const char * const bq24190_modules[]; + +extern const struct platform_device_info int3496_pdevs[]; +extern struct gpiod_lookup_table int3496_reference_gpios; + +#endif diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h new file mode 100644 index 000000000000..b6802d75dbdd --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * DMI based code to deal with broken DSDTs on X86 tablets which ship with + * Android as (part of) the factory image. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021-2023 Hans de Goede <hdegoede@redhat.com> + */ +#ifndef __PDX86_X86_ANDROID_TABLETS_H +#define __PDX86_X86_ANDROID_TABLETS_H + +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/irqdomain_defs.h> + +struct gpio_desc; +struct gpiod_lookup_table; +struct platform_device_info; +struct software_node; + +/* + * Helpers to get Linux IRQ numbers given a description of the IRQ source + * (either IOAPIC index, or GPIO chip name + pin-number). + */ +enum x86_acpi_irq_type { + X86_ACPI_IRQ_TYPE_NONE, + X86_ACPI_IRQ_TYPE_APIC, + X86_ACPI_IRQ_TYPE_GPIOINT, + X86_ACPI_IRQ_TYPE_PMIC, +}; + +struct x86_acpi_irq_data { + char *chip; /* GPIO chip label (GPIOINT) or PMIC ACPI path (PMIC) */ + enum x86_acpi_irq_type type; + enum irq_domain_bus_token domain; + int index; + int trigger; /* ACPI_EDGE_SENSITIVE / ACPI_LEVEL_SENSITIVE */ + int polarity; /* ACPI_ACTIVE_HIGH / ACPI_ACTIVE_LOW / ACPI_ACTIVE_BOTH */ +}; + +/* Structs to describe devices to instantiate */ +struct x86_i2c_client_info { + struct i2c_board_info board_info; + char *adapter_path; + struct x86_acpi_irq_data irq_data; +}; + +struct x86_serdev_info { + const char *ctrl_hid; + const char *ctrl_uid; + const char *ctrl_devname; + /* + * ATM the serdev core only supports of or ACPI matching; and sofar all + * Android x86 tablets DSDTs have usable serdev nodes, but sometimes + * under the wrong controller. So we just tie the existing serdev ACPI + * node to the right controller. + */ + const char *serdev_hid; +}; + +struct x86_gpio_button { + struct gpio_keys_button button; + const char *chip; + int pin; +}; + +struct x86_dev_info { + char *invalid_aei_gpiochip; + const char * const *modules; + const struct software_node *bat_swnode; + struct gpiod_lookup_table * const *gpiod_lookup_tables; + const struct x86_i2c_client_info *i2c_client_info; + const struct platform_device_info *pdev_info; + const struct x86_serdev_info *serdev_info; + struct x86_gpio_button *gpio_button; + int i2c_client_count; + int pdev_count; + int serdev_count; + int (*init)(void); + void (*exit)(void); +}; + +int x86_android_tablet_get_gpiod(const char *label, int pin, struct gpio_desc **desc); +int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data); + +/* + * Extern declarations of x86_dev_info structs so there can be a single + * MODULE_DEVICE_TABLE(dmi, ...), while splitting the board descriptions. + */ +extern const struct x86_dev_info acer_b1_750_info; +extern const struct x86_dev_info advantech_mica_071_info; +extern const struct x86_dev_info asus_me176c_info; +extern const struct x86_dev_info asus_tf103c_info; +extern const struct x86_dev_info chuwi_hi8_info; +extern const struct x86_dev_info czc_p10t; +extern const struct x86_dev_info lenovo_yogabook_x90_info; +extern const struct x86_dev_info lenovo_yogabook_x91_info; +extern const struct x86_dev_info lenovo_yoga_tab2_830_1050_info; +extern const struct x86_dev_info lenovo_yt3_info; +extern const struct x86_dev_info medion_lifetab_s10346_info; +extern const struct x86_dev_info nextbook_ares8_info; +extern const struct x86_dev_info peaq_c1010_info; +extern const struct x86_dev_info whitelabel_tm800a550l_info; +extern const struct x86_dev_info xiaomi_mipad2_info; +extern const struct dmi_system_id x86_android_tablet_ids[]; + +#endif diff --git a/drivers/platform/x86/xo1-rfkill.c b/drivers/platform/x86/xo1-rfkill.c index cb3253c10ef3..e64d5646b4c7 100644 --- a/drivers/platform/x86/xo1-rfkill.c +++ b/drivers/platform/x86/xo1-rfkill.c @@ -56,12 +56,11 @@ static int xo1_rfkill_probe(struct platform_device *pdev) return 0; } -static int xo1_rfkill_remove(struct platform_device *pdev) +static void xo1_rfkill_remove(struct platform_device *pdev) { struct rfkill *rfk = platform_get_drvdata(pdev); rfkill_unregister(rfk); rfkill_destroy(rfk); - return 0; } static struct platform_driver xo1_rfkill_driver = { @@ -69,7 +68,7 @@ static struct platform_driver xo1_rfkill_driver = { .name = "xo1-rfkill", }, .probe = xo1_rfkill_probe, - .remove = xo1_rfkill_remove, + .remove_new = xo1_rfkill_remove, }; module_platform_driver(xo1_rfkill_driver); diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 4c33e971c0f0..51387b1ef012 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -285,6 +285,7 @@ config BACKLIGHT_MT6370 config BACKLIGHT_APPLE tristate "Apple Backlight Driver" depends on X86 && ACPI + depends on ACPI_VIDEO=n || ACPI_VIDEO help If you have an Intel-based Apple say Y to enable a driver for its backlight. diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c index e9e7acb577bf..aaa824437a2a 100644 --- a/drivers/video/backlight/apple_bl.c +++ b/drivers/video/backlight/apple_bl.c @@ -24,7 +24,7 @@ #include <linux/pci.h> #include <linux/acpi.h> #include <linux/atomic.h> -#include <linux/apple_bl.h> +#include <acpi/video.h> static struct backlight_device *apple_backlight_device; @@ -215,32 +215,21 @@ static struct acpi_driver apple_bl_driver = { }, }; -static atomic_t apple_bl_registered = ATOMIC_INIT(0); - -int apple_bl_register(void) -{ - if (atomic_xchg(&apple_bl_registered, 1) == 0) - return acpi_bus_register_driver(&apple_bl_driver); - - return 0; -} -EXPORT_SYMBOL_GPL(apple_bl_register); - -void apple_bl_unregister(void) -{ - if (atomic_xchg(&apple_bl_registered, 0) == 1) - acpi_bus_unregister_driver(&apple_bl_driver); -} -EXPORT_SYMBOL_GPL(apple_bl_unregister); - static int __init apple_bl_init(void) { - return apple_bl_register(); + /* + * Use ACPI video detection code to see if this driver should register + * or if another driver, e.g. the apple-gmux driver should be used. + */ + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) + return -ENODEV; + + return acpi_bus_register_driver(&apple_bl_driver); } static void __exit apple_bl_exit(void) { - apple_bl_unregister(); + acpi_bus_unregister_driver(&apple_bl_driver); } module_init(apple_bl_init); diff --git a/include/linux/apple-gmux.h b/include/linux/apple-gmux.h index 1f68b49bcd68..206d97ffda79 100644 --- a/include/linux/apple-gmux.h +++ b/include/linux/apple-gmux.h @@ -34,8 +34,20 @@ #define GMUX_PORT_READ 0xd0 #define GMUX_PORT_WRITE 0xd4 +#define GMUX_MMIO_PORT_SELECT 0x0e +#define GMUX_MMIO_COMMAND_SEND 0x0f + +#define GMUX_MMIO_READ 0x00 +#define GMUX_MMIO_WRITE 0x40 + #define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) +enum apple_gmux_type { + APPLE_GMUX_TYPE_PIO, + APPLE_GMUX_TYPE_INDEXED, + APPLE_GMUX_TYPE_MMIO, +}; + #if IS_ENABLED(CONFIG_APPLE_GMUX) static inline bool apple_gmux_is_indexed(unsigned long iostart) { @@ -52,11 +64,29 @@ static inline bool apple_gmux_is_indexed(unsigned long iostart) return false; } +static inline bool apple_gmux_is_mmio(unsigned long iostart) +{ + u8 __iomem *iomem_base = ioremap(iostart, 16); + u8 val; + + if (!iomem_base) + return false; + + /* + * If this is 0xff, then gmux must not be present, as the gmux would + * reset it to 0x00, or it would be one of 0x1, 0x4, 0x41, 0x44 if a + * command is currently being processed. + */ + val = ioread8(iomem_base + GMUX_MMIO_COMMAND_SEND); + iounmap(iomem_base); + return (val != 0xff); +} + /** * apple_gmux_detect() - detect if gmux is built into the machine * * @pnp_dev: Device to probe or NULL to use the first matching device - * @indexed_ret: Returns (by reference) if the gmux is indexed or not + * @type_ret: Returns (by reference) the apple_gmux_type of the device * * Detect if a supported gmux device is present by actually probing it. * This avoids the false positives returned on some models by @@ -65,13 +95,13 @@ static inline bool apple_gmux_is_indexed(unsigned long iostart) * Return: %true if a supported gmux ACPI device is detected and the kernel * was configured with CONFIG_APPLE_GMUX, %false otherwise. */ -static inline bool apple_gmux_detect(struct pnp_dev *pnp_dev, bool *indexed_ret) +static inline bool apple_gmux_detect(struct pnp_dev *pnp_dev, enum apple_gmux_type *type_ret) { u8 ver_major, ver_minor, ver_release; struct device *dev = NULL; struct acpi_device *adev; struct resource *res; - bool indexed = false; + enum apple_gmux_type type = APPLE_GMUX_TYPE_PIO; bool ret = false; if (!pnp_dev) { @@ -88,24 +118,30 @@ static inline bool apple_gmux_detect(struct pnp_dev *pnp_dev, bool *indexed_ret) } res = pnp_get_resource(pnp_dev, IORESOURCE_IO, 0); - if (!res || resource_size(res) < GMUX_MIN_IO_LEN) - goto out; - - /* - * Invalid version information may indicate either that the gmux - * device isn't present or that it's a new one that uses indexed io. - */ - ver_major = inb(res->start + GMUX_PORT_VERSION_MAJOR); - ver_minor = inb(res->start + GMUX_PORT_VERSION_MINOR); - ver_release = inb(res->start + GMUX_PORT_VERSION_RELEASE); - if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { - indexed = apple_gmux_is_indexed(res->start); - if (!indexed) + if (res && resource_size(res) >= GMUX_MIN_IO_LEN) { + /* + * Invalid version information may indicate either that the gmux + * device isn't present or that it's a new one that uses indexed io. + */ + ver_major = inb(res->start + GMUX_PORT_VERSION_MAJOR); + ver_minor = inb(res->start + GMUX_PORT_VERSION_MINOR); + ver_release = inb(res->start + GMUX_PORT_VERSION_RELEASE); + if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { + if (apple_gmux_is_indexed(res->start)) + type = APPLE_GMUX_TYPE_INDEXED; + else + goto out; + } + } else { + res = pnp_get_resource(pnp_dev, IORESOURCE_MEM, 0); + if (res && apple_gmux_is_mmio(res->start)) + type = APPLE_GMUX_TYPE_MMIO; + else goto out; } - if (indexed_ret) - *indexed_ret = indexed; + if (type_ret) + *type_ret = type; ret = true; out: diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h deleted file mode 100644 index 445af2e3cc21..000000000000 --- a/include/linux/apple_bl.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * apple_bl exported symbols - */ - -#ifndef _LINUX_APPLE_BL_H -#define _LINUX_APPLE_BL_H - -#if defined(CONFIG_BACKLIGHT_APPLE) || defined(CONFIG_BACKLIGHT_APPLE_MODULE) - -extern int apple_bl_register(void); -extern void apple_bl_unregister(void); - -#else /* !CONFIG_BACKLIGHT_APPLE */ - -static inline int apple_bl_register(void) -{ - return 0; -} - -static inline void apple_bl_unregister(void) -{ -} - -#endif /* !CONFIG_BACKLIGHT_APPLE */ - -#endif /* _LINUX_APPLE_BL_H */ diff --git a/include/uapi/linux/isst_if.h b/include/uapi/linux/isst_if.h index ba078f8e9add..0df1a1c3caf4 100644 --- a/include/uapi/linux/isst_if.h +++ b/include/uapi/linux/isst_if.h @@ -163,10 +163,313 @@ struct isst_if_msr_cmds { struct isst_if_msr_cmd msr_cmd[1]; }; +/** + * struct isst_core_power - Structure to get/set core_power feature + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @enable: Feature enable status + * @priority_type: Priority type for the feature (ordered/proportional) + * + * Structure to get/set core_power feature state using IOCTL + * ISST_IF_CORE_POWER_STATE. + */ +struct isst_core_power { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 enable; + __u8 supported; + __u8 priority_type; +}; + +/** + * struct isst_clos_param - Structure to get/set clos praram + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * clos: Clos ID for the parameters + * min_freq_mhz: Minimum frequency in MHz + * max_freq_mhz: Maximum frequency in MHz + * prop_prio: Proportional priority from 0-15 + * + * Structure to get/set per clos property using IOCTL + * ISST_IF_CLOS_PARAM. + */ +struct isst_clos_param { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 clos; + __u16 min_freq_mhz; + __u16 max_freq_mhz; + __u8 prop_prio; +}; + +/** + * struct isst_if_clos_assoc - Structure to assign clos to a CPU + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * + * Structure to get/set core_power feature. + */ +struct isst_if_clos_assoc { + __u8 socket_id; + __u8 power_domain_id; + __u16 logical_cpu; + __u16 clos; +}; + +/** + * struct isst_if_clos_assoc_cmds - Structure to assign clos to CPUs + * @cmd_count: Number of cmds (cpus) in this request + * @get_set: Request is for get or set + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number + * + * Structure used to get/set associate CPUs to clos using IOCTL + * ISST_IF_CLOS_ASSOC. + */ +struct isst_if_clos_assoc_cmds { + __u16 cmd_count; + __u16 get_set; + __u16 punit_cpu_map; + struct isst_if_clos_assoc assoc_info[1]; +}; + +/** + * struct isst_tpmi_instance_count - Get number of TPMI instances per socket + * @socket_id: Socket/package id + * @count: Number of instances + * @valid_mask: Mask of instances as there can be holes + * + * Structure used to get TPMI instances information using + * IOCTL ISST_IF_COUNT_TPMI_INSTANCES. + */ +struct isst_tpmi_instance_count { + __u8 socket_id; + __u8 count; + __u16 valid_mask; +}; + +/** + * struct isst_perf_level_info - Structure to get information on SST-PP levels + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * @max_level: Maximum performance level supported by the platform + * @feature_rev: The feature revision for SST-PP supported by the platform + * @level_mask: Mask of supported performance levels + * @current_level: Current performance level + * @feature_state: SST-BF and SST-TF (enabled/disabled) status at current level + * @locked: SST-PP performance level change is locked/unlocked + * @enabled: SST-PP feature is enabled or not + * @sst-tf_support: SST-TF support status at this level + * @sst-bf_support: SST-BF support status at this level + * + * Structure to get SST-PP details using IOCTL ISST_IF_PERF_LEVELS. + */ +struct isst_perf_level_info { + __u8 socket_id; + __u8 power_domain_id; + __u8 max_level; + __u8 feature_rev; + __u8 level_mask; + __u8 current_level; + __u8 feature_state; + __u8 locked; + __u8 enabled; + __u8 sst_tf_support; + __u8 sst_bf_support; +}; + +/** + * struct isst_perf_level_control - Structure to set SST-PP level + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: level to set + * + * Structure used change SST-PP level using IOCTL ISST_IF_PERF_SET_LEVEL. + */ +struct isst_perf_level_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; +}; + +/** + * struct isst_perf_feature_control - Structure to activate SST-BF/SST-TF + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @feature: bit 0 = SST-BF state, bit 1 = SST-TF state + * + * Structure used to enable SST-BF/SST-TF using IOCTL ISST_IF_PERF_SET_FEATURE. + */ +struct isst_perf_feature_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 feature; +}; + +#define TRL_MAX_BUCKETS 8 +#define TRL_MAX_LEVELS 6 + +/** + * struct isst_perf_level_data_info - Structure to get SST-PP level details + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @tdp_ratio: TDP Ratio + * @base_freq_mhz: Base frequency in MHz + * @base_freq_avx2_mhz: AVX2 Base frequency in MHz + * @base_freq_avx512_mhz: AVX512 base frequency in MHz + * @base_freq_amx_mhz: AMX base frequency in MHz + * @thermal_design_power_w: Thermal design (TDP) power + * @tjunction_max_c: Max junction temperature + * @max_memory_freq_mhz: Max memory frequency in MHz + * @cooling_type: Type of cooling is used + * @p0_freq_mhz: core maximum frequency + * @p1_freq_mhz: Core TDP frequency + * @pn_freq_mhz: Core maximum efficiency frequency + * @pm_freq_mhz: Core minimum frequency + * @p0_fabric_freq_mhz: Fabric (Uncore) maximum frequency + * @p1_fabric_freq_mhz: Fabric (Uncore) TDP frequency + * @pn_fabric_freq_mhz: Fabric (Uncore) minimum efficiency frequency + * @pm_fabric_freq_mhz: Fabric (Uncore) minimum frequency + * @max_buckets: Maximum trl buckets + * @max_trl_levels: Maximum trl levels + * @bucket_core_counts[TRL_MAX_BUCKETS]: Number of cores per bucket + * @trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]: maximum frequency + * for a bucket and trl level + * + * Structure used to get information on frequencies and TDP for a SST-PP + * level using ISST_IF_GET_PERF_LEVEL_INFO. + */ +struct isst_perf_level_data_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 tdp_ratio; + __u16 base_freq_mhz; + __u16 base_freq_avx2_mhz; + __u16 base_freq_avx512_mhz; + __u16 base_freq_amx_mhz; + __u16 thermal_design_power_w; + __u16 tjunction_max_c; + __u16 max_memory_freq_mhz; + __u16 cooling_type; + __u16 p0_freq_mhz; + __u16 p1_freq_mhz; + __u16 pn_freq_mhz; + __u16 pm_freq_mhz; + __u16 p0_fabric_freq_mhz; + __u16 p1_fabric_freq_mhz; + __u16 pn_fabric_freq_mhz; + __u16 pm_fabric_freq_mhz; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + +/** + * struct isst_perf_level_cpu_mask - Structure to get SST-PP level CPU mask + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number. If 0 CPU buffer is copied to user space + * supplied cpu_buffer of size cpu_buffer_size. Punit + * cpu mask is copied to "mask" field. + * @mask: cpu mask for this PP level (punit CPU numbering) + * @cpu_buffer_size: size of cpu_buffer also used to return the copied CPU + * buffer size. + * @cpu_buffer: Buffer to copy CPU mask when punit_cpu_map is 0 + * + * Structure used to get cpumask for a SST-PP level using + * IOCTL ISST_IF_GET_PERF_LEVEL_CPU_MASK. Also used to get CPU mask for + * IOCTL ISST_IF_GET_BASE_FREQ_CPU_MASK for SST-BF. + */ +struct isst_perf_level_cpu_mask { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; + __u8 punit_cpu_map; + __u64 mask; + __u16 cpu_buffer_size; + __s8 cpu_buffer[1]; +}; + +/** + * struct isst_base_freq_info - Structure to get SST-BF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @high_base_freq_mhz: High priority CPU base frequency + * @low_base_freq_mhz: Low priority CPU base frequency + * @tjunction_max_c: Max junction temperature + * @thermal_design_power_w: Thermal design power in watts + * + * Structure used to get SST-BF information using + * IOCTL ISST_IF_GET_BASE_FREQ_INFO. + */ +struct isst_base_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 high_base_freq_mhz; + __u16 low_base_freq_mhz; + __u16 tjunction_max_c; + __u16 thermal_design_power_w; +}; + +/** + * struct isst_turbo_freq_info - Structure to get SST-TF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @max_clip_freqs: Maximum number of low priority core clipping frequencies + * @lp_clip_freq_mhz: Clip frequencies per trl level + * @bucket_core_counts: Maximum number of cores for a bucket + * @trl_freq_mhz: Frequencies per trl level for each bucket + * + * Structure used to get SST-TF information using + * IOCTL ISST_IF_GET_TURBO_FREQ_INFO. + */ +struct isst_turbo_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 max_clip_freqs; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 lp_clip_freq_mhz[TRL_MAX_LEVELS]; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + #define ISST_IF_MAGIC 0xFE #define ISST_IF_GET_PLATFORM_INFO _IOR(ISST_IF_MAGIC, 0, struct isst_if_platform_info *) #define ISST_IF_GET_PHY_ID _IOWR(ISST_IF_MAGIC, 1, struct isst_if_cpu_map *) #define ISST_IF_IO_CMD _IOW(ISST_IF_MAGIC, 2, struct isst_if_io_regs *) #define ISST_IF_MBOX_COMMAND _IOWR(ISST_IF_MAGIC, 3, struct isst_if_mbox_cmds *) #define ISST_IF_MSR_COMMAND _IOWR(ISST_IF_MAGIC, 4, struct isst_if_msr_cmds *) + +#define ISST_IF_COUNT_TPMI_INSTANCES _IOR(ISST_IF_MAGIC, 5, struct isst_tpmi_instance_count *) +#define ISST_IF_CORE_POWER_STATE _IOWR(ISST_IF_MAGIC, 6, struct isst_core_power *) +#define ISST_IF_CLOS_PARAM _IOWR(ISST_IF_MAGIC, 7, struct isst_clos_param *) +#define ISST_IF_CLOS_ASSOC _IOWR(ISST_IF_MAGIC, 8, struct isst_if_clos_assoc_cmds *) + +#define ISST_IF_PERF_LEVELS _IOWR(ISST_IF_MAGIC, 9, struct isst_perf_level_info *) +#define ISST_IF_PERF_SET_LEVEL _IOW(ISST_IF_MAGIC, 10, struct isst_perf_level_control *) +#define ISST_IF_PERF_SET_FEATURE _IOW(ISST_IF_MAGIC, 11, struct isst_perf_feature_control *) +#define ISST_IF_GET_PERF_LEVEL_INFO _IOR(ISST_IF_MAGIC, 12, struct isst_perf_level_data_info *) +#define ISST_IF_GET_PERF_LEVEL_CPU_MASK _IOR(ISST_IF_MAGIC, 13, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_BASE_FREQ_INFO _IOR(ISST_IF_MAGIC, 14, struct isst_base_freq_info *) +#define ISST_IF_GET_BASE_FREQ_CPU_MASK _IOR(ISST_IF_MAGIC, 15, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_TURBO_FREQ_INFO _IOR(ISST_IF_MAGIC, 16, struct isst_turbo_freq_info *) + #endif diff --git a/tools/power/x86/intel-speed-select/Build b/tools/power/x86/intel-speed-select/Build index 81e36bd578b1..5a9637e1678c 100644 --- a/tools/power/x86/intel-speed-select/Build +++ b/tools/power/x86/intel-speed-select/Build @@ -1 +1 @@ -intel-speed-select-y += isst-config.o isst-core.o isst-display.o isst-daemon.o hfi-events.o +intel-speed-select-y += isst-config.o isst-core.o isst-display.o isst-daemon.o hfi-events.o isst-core-mbox.o isst-core-tpmi.o diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c index 55d0a35df41c..2ca0cedd418f 100644 --- a/tools/power/x86/intel-speed-select/isst-config.c +++ b/tools/power/x86/intel-speed-select/isst-config.c @@ -15,9 +15,9 @@ struct process_cmd_struct { int arg; }; -static const char *version_str = "v1.14"; +static const char *version_str = "v1.15"; -static const int supported_api_ver = 1; +static const int supported_api_ver = 2; static struct isst_if_platform_info isst_platform_info; static char *progname; static int debug_flag; @@ -44,9 +44,7 @@ static int cmd_help; static int force_online_offline; static int auto_mode; static int fact_enable_fail; - -static int mbox_delay; -static int mbox_retries = 3; +static int cgroupv2; /* clos related */ static int current_clos = -1; @@ -61,6 +59,7 @@ struct _cpu_map { unsigned short core_id; unsigned short pkg_id; unsigned short die_id; + unsigned short punit_id; unsigned short punit_cpu; unsigned short punit_cpu_core; unsigned short initialized; @@ -79,6 +78,11 @@ FILE *get_output_file(void) return outf; } +int is_debug_enabled(void) +{ + return debug_flag; +} + void debug_printf(const char *format, ...) { va_list args; @@ -110,12 +114,21 @@ int is_skx_based_platform(void) int is_spr_platform(void) { - if (cpu_model == 0x8F || cpu_model == 0xCF) + if (cpu_model == 0x8F) + return 1; + + return 0; +} + +int is_emr_platform(void) +{ + if (cpu_model == 0xCF) return 1; return 0; } + int is_icx_platform(void) { if (cpu_model == 0x6A || cpu_model == 0x6C) @@ -163,6 +176,11 @@ static int update_cpu_model(void) return 0; } +int api_version(void) +{ + return isst_platform_info.api_version; +} + /* Open a file, and exit on failure */ static FILE *fopen_or_exit(const char *path, const char *mode) { @@ -378,6 +396,17 @@ static int get_physical_die_id(int cpu) return ret; } +static int get_physical_punit_id(int cpu) +{ + if (cpu < 0) + return -1; + + if (cpu_map && cpu_map[cpu].initialized) + return cpu_map[cpu].punit_id; + + return -1; +} + void set_isst_id(struct isst_id *id, int cpu) { id->cpu = cpu; @@ -389,6 +418,10 @@ void set_isst_id(struct isst_id *id, int cpu) id->die = get_physical_die_id(cpu); if (id->die >= MAX_DIE_PER_PACKAGE) id->die = -1; + + id->punit = get_physical_punit_id(cpu); + if (id->punit >= MAX_PUNIT_PER_DIE) + id->punit = -1; } int is_cpu_in_power_domain(int cpu, struct isst_id *id) @@ -397,7 +430,7 @@ int is_cpu_in_power_domain(int cpu, struct isst_id *id) set_isst_id(&tid, cpu); - if (id->pkg == tid.pkg && id->die == tid.die) + if (id->pkg == tid.pkg && id->die == tid.die && id->punit == tid.punit) return 1; return 0; @@ -481,51 +514,59 @@ static void force_all_cpus_online(void) unlink("/var/run/isst_cpu_topology.dat"); } -void for_each_online_package_in_set(void (*callback)(struct isst_id *, void *, void *, +void for_each_online_power_domain_in_set(void (*callback)(struct isst_id *, void *, void *, void *, void *), void *arg1, void *arg2, void *arg3, void *arg4) { - int max_packages[MAX_PACKAGE_COUNT * MAX_PACKAGE_COUNT]; - int pkg_index = 0, i; struct isst_id id; + int cpus[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]; + int valid_mask[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE] = {0}; + int i, j, k; + + memset(cpus, -1, sizeof(cpus)); - memset(max_packages, 0xff, sizeof(max_packages)); for (i = 0; i < topo_max_cpus; ++i) { - int j, online, pkg_id, die_id = 0, skip = 0; + int online; if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) continue; - if (i) - online = parse_int_file( - 1, "/sys/devices/system/cpu/cpu%d/online", i); - else - online = - 1; /* online entry for CPU 0 needs some special configs */ - die_id = get_physical_die_id(i); - if (die_id < 0) - die_id = 0; + online = parse_int_file( + i != 0, "/sys/devices/system/cpu/cpu%d/online", i); + if (online < 0) + online = 1; /* online entry for CPU 0 needs some special configs */ - pkg_id = parse_int_file(0, - "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", i); - if (pkg_id < 0) + if (!online) continue; - /* Create an unique id for package, die combination to store */ - pkg_id = (MAX_PACKAGE_COUNT * pkg_id + die_id); + set_isst_id(&id, i); - for (j = 0; j < pkg_index; ++j) { - if (max_packages[j] == pkg_id) { - skip = 1; - break; - } - } + if (id.pkg < 0 || id.die < 0 || id.punit < 0) + continue; - set_isst_id(&id, i); - if (!skip && online && callback) { - callback(&id, arg1, arg2, arg3, arg4); - max_packages[pkg_index++] = pkg_id; + valid_mask[id.pkg][id.die] = 1; + + if (cpus[id.pkg][id.die][id.punit] == -1) + cpus[id.pkg][id.die][id.punit] = i; + } + + for (i = 0; i < MAX_PACKAGE_COUNT; i++) { + for (j = 0; j < MAX_DIE_PER_PACKAGE; j++) { + /* + * Fix me: + * How to check a non-cpu die for a package/die with all cpu offlined? + */ + if (!valid_mask[i][j]) + continue; + for (k = 0; k < MAX_PUNIT_PER_DIE; k++) { + id.cpu = cpus[i][j][k]; + id.pkg = i; + id.die = j; + id.punit = k; + if (isst_is_punit_valid(&id)) + callback(&id, arg1, arg2, arg3, arg4); + } } } } @@ -610,7 +651,7 @@ void free_cpu_set(cpu_set_t *cpu_set) CPU_FREE(cpu_set); } -static int cpu_cnt[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; +static int cpu_cnt[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]; int get_max_punit_core_id(struct isst_id *id) { @@ -632,10 +673,50 @@ int get_max_punit_core_id(struct isst_id *id) int get_cpu_count(struct isst_id *id) { - if (id->pkg < 0 || id->die < 0) + if (id->pkg < 0 || id->die < 0 || id->punit < 0) return 0; - return cpu_cnt[id->pkg][id->die]; + return cpu_cnt[id->pkg][id->die][id->punit]; +} + +static void update_punit_cpu_info(__u32 physical_cpu, struct _cpu_map *cpu_map) +{ + if (api_version() > 1) { + /* + * MSR 0x54 format + * [15:11] PM_DOMAIN_ID + * [10:3] MODULE_ID (aka IDI_AGENT_ID) + * [2:0] LP_ID (We don't care about these bits we only + * care die and core id + * For Atom: + * [2] Always 0 + * [1:0] core ID within module + * For Core + * [2:1] Always 0 + * [0] thread ID + */ + cpu_map->punit_id = (physical_cpu >> 11) & 0x1f; + cpu_map->punit_cpu_core = (physical_cpu >> 3) & 0xff; + cpu_map->punit_cpu = physical_cpu & 0x7ff; + } else { + int punit_id; + + /* + * MSR 0x53 format + * Format + * Bit 0 – thread ID + * Bit 8:1 – core ID + * Bit 13:9 – punit ID + */ + cpu_map->punit_cpu = physical_cpu & 0x1ff; + cpu_map->punit_cpu_core = (cpu_map->punit_cpu >> 1); // shift to get core id + punit_id = (physical_cpu >> 9) & 0x1f; + + if (punit_id >= MAX_PUNIT_PER_DIE) + punit_id = 0; + + cpu_map->punit_id = punit_id; + } } static void create_cpu_map(void) @@ -660,7 +741,7 @@ static void create_cpu_map(void) for (i = 0; i < topo_max_cpus; ++i) { char buffer[256]; - int pkg_id, die_id, core_id; + int pkg_id, die_id, core_id, punit_id; /* check if CPU is online */ snprintf(buffer, sizeof(buffer), @@ -682,31 +763,32 @@ static void create_cpu_map(void) cpu_map[i].pkg_id = pkg_id; cpu_map[i].die_id = die_id; cpu_map[i].core_id = core_id; - cpu_map[i].initialized = 1; - cpu_cnt[pkg_id][die_id]++; - if (fd < 0) - continue; - map.cmd_count = 1; - map.cpu_map[0].logical_cpu = i; - debug_printf(" map logical_cpu:%d\n", - map.cpu_map[0].logical_cpu); - if (ioctl(fd, ISST_IF_GET_PHY_ID, &map) == -1) { - perror("ISST_IF_GET_PHY_ID"); - fprintf(outf, "Error: map logical_cpu:%d\n", - map.cpu_map[0].logical_cpu); - continue; + punit_id = 0; + + if (fd >= 0) { + map.cmd_count = 1; + map.cpu_map[0].logical_cpu = i; + debug_printf(" map logical_cpu:%d\n", + map.cpu_map[0].logical_cpu); + if (ioctl(fd, ISST_IF_GET_PHY_ID, &map) == -1) { + perror("ISST_IF_GET_PHY_ID"); + fprintf(outf, "Error: map logical_cpu:%d\n", + map.cpu_map[0].logical_cpu); + } else { + update_punit_cpu_info(map.cpu_map[0].physical_cpu, &cpu_map[i]); + } } - cpu_map[i].punit_cpu = map.cpu_map[0].physical_cpu; - cpu_map[i].punit_cpu_core = (map.cpu_map[0].physical_cpu >> - 1); // shift to get core id + cpu_map[i].initialized = 1; + + cpu_cnt[pkg_id][die_id][punit_id]++; debug_printf( - "map logical_cpu:%d core: %d die:%d pkg:%d punit_cpu:%d punit_core:%d\n", + "map logical_cpu:%d core: %d die:%d pkg:%d punit:%d punit_cpu:%d punit_core:%d\n", i, cpu_map[i].core_id, cpu_map[i].die_id, - cpu_map[i].pkg_id, cpu_map[i].punit_cpu, - cpu_map[i].punit_cpu_core); + cpu_map[i].pkg_id, cpu_map[i].punit_id, + cpu_map[i].punit_cpu, cpu_map[i].punit_cpu_core); } if (fd >= 0) close(fd); @@ -728,6 +810,9 @@ void set_cpu_mask_from_punit_coremask(struct isst_id *id, unsigned long long cor { int i, cnt = 0; + if (id->cpu < 0) + return; + *cpu_cnt = 0; for (i = 0; i < 64; ++i) { @@ -759,182 +844,135 @@ int find_phy_core_num(int logical_cpu) return -EINVAL; } -static int isst_send_mmio_command(unsigned int cpu, unsigned int reg, int write, - unsigned int *value) +int use_cgroupv2(void) { - struct isst_if_io_regs io_regs; - const char *pathname = "/dev/isst_interface"; - int cmd; - int fd; - - debug_printf("mmio_cmd cpu:%d reg:%d write:%d\n", cpu, reg, write); + return cgroupv2; +} - fd = open(pathname, O_RDWR); - if (fd < 0) - err(-1, "%s open failed", pathname); +int enable_cpuset_controller(void) +{ + int fd, ret; - io_regs.req_count = 1; - io_regs.io_reg[0].logical_cpu = cpu; - io_regs.io_reg[0].reg = reg; - cmd = ISST_IF_IO_CMD; - if (write) { - io_regs.io_reg[0].read_write = 1; - io_regs.io_reg[0].value = *value; - } else { - io_regs.io_reg[0].read_write = 0; + fd = open("/sys/fs/cgroup/cgroup.subtree_control", O_RDWR, 0); + if (fd < 0) { + debug_printf("Can't activate cpuset controller\n"); + debug_printf("Either you are not root user or CGroup v2 is not supported\n"); + return fd; } - if (ioctl(fd, cmd, &io_regs) == -1) { - if (errno == ENOTTY) { - perror("ISST_IF_IO_COMMAND\n"); - fprintf(stderr, "Check presence of kernel modules: isst_if_mmio\n"); - exit(0); - } - fprintf(outf, "Error: mmio_cmd cpu:%d reg:%x read_write:%x\n", - cpu, reg, write); - } else { - if (!write) - *value = io_regs.io_reg[0].value; + ret = write(fd, " +cpuset", strlen(" +cpuset")); + close(fd); - debug_printf( - "mmio_cmd response: cpu:%d reg:%x rd_write:%x resp:%x\n", - cpu, reg, write, *value); + if (ret == -1) { + debug_printf("Can't activate cpuset controller: Write failed\n"); + return ret; } - close(fd); - return 0; } -int isst_send_mbox_command(unsigned int cpu, unsigned char command, - unsigned char sub_command, unsigned int parameter, - unsigned int req_data, unsigned int *resp) +int isolate_cpus(struct isst_id *id, int mask_size, cpu_set_t *cpu_mask, int level) { - const char *pathname = "/dev/isst_interface"; - int fd, retry; - struct isst_if_mbox_cmds mbox_cmds = { 0 }; - - debug_printf( - "mbox_send: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x\n", - cpu, command, sub_command, parameter, req_data); + int i, first, curr_index, index, ret, fd; + static char str[512], dir_name[64]; + static char cpuset_cpus[128]; + int str_len = sizeof(str); + DIR *dir; - if (!is_skx_based_platform() && command == CONFIG_CLOS && - sub_command != CLOS_PM_QOS_CONFIG) { - unsigned int value; - int write = 0; - int clos_id, core_id, ret = 0; + snprintf(dir_name, sizeof(dir_name), "/sys/fs/cgroup/%d-%d-%d", id->pkg, id->die, id->punit); + dir = opendir(dir_name); + if (!dir) { + ret = mkdir(dir_name, 0744); + if (ret) { + debug_printf("Can't create dir:%s errno:%d\n", dir_name, errno); + return ret; + } + } + closedir(dir); - debug_printf("CPU %d\n", cpu); + if (!level) { + sprintf(cpuset_cpus, "%s/cpuset.cpus.partition", dir_name); - if (parameter & BIT(MBOX_CMD_WRITE_BIT)) { - value = req_data; - write = 1; + fd = open(cpuset_cpus, O_RDWR, 0); + if (fd < 0) { + return fd; } - switch (sub_command) { - case CLOS_PQR_ASSOC: - core_id = parameter & 0xff; - ret = isst_send_mmio_command( - cpu, PQR_ASSOC_OFFSET + core_id * 4, write, - &value); - if (!ret && !write) - *resp = value; - break; - case CLOS_PM_CLOS: - clos_id = parameter & 0x03; - ret = isst_send_mmio_command( - cpu, PM_CLOS_OFFSET + clos_id * 4, write, - &value); - if (!ret && !write) - *resp = value; - break; - case CLOS_STATUS: - break; - default: - break; + ret = write(fd, "member", strlen("member")); + if (ret == -1) { + printf("Can't update to member\n"); + return ret; } - return ret; - } - mbox_cmds.cmd_count = 1; - mbox_cmds.mbox_cmd[0].logical_cpu = cpu; - mbox_cmds.mbox_cmd[0].command = command; - mbox_cmds.mbox_cmd[0].sub_command = sub_command; - mbox_cmds.mbox_cmd[0].parameter = parameter; - mbox_cmds.mbox_cmd[0].req_data = req_data; + return 0; + } - if (mbox_delay) - usleep(mbox_delay * 1000); + if (!CPU_COUNT_S(mask_size, cpu_mask)) { + return -1; + } - fd = open(pathname, O_RDWR); - if (fd < 0) - err(-1, "%s open failed", pathname); + curr_index = 0; + first = 1; + str[0] = '\0'; + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (!is_cpu_in_power_domain(i, id)) + continue; - retry = mbox_retries; + if (CPU_ISSET_S(i, mask_size, cpu_mask)) + continue; - do { - if (ioctl(fd, ISST_IF_MBOX_COMMAND, &mbox_cmds) == -1) { - if (errno == ENOTTY) { - perror("ISST_IF_MBOX_COMMAND\n"); - fprintf(stderr, "Check presence of kernel modules: isst_if_mbox_pci or isst_if_mbox_msr\n"); - exit(0); - } - debug_printf( - "Error: mbox_cmd cpu:%d command:%x sub_command:%x parameter:%x req_data:%x errorno:%d\n", - cpu, command, sub_command, parameter, req_data, errno); - --retry; - } else { - *resp = mbox_cmds.mbox_cmd[0].resp_data; - debug_printf( - "mbox_cmd response: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x resp:%x\n", - cpu, command, sub_command, parameter, req_data, *resp); - break; + if (!first) { + index = snprintf(&str[curr_index], + str_len - curr_index, ","); + curr_index += index; + if (curr_index >= str_len) + break; } - } while (retry); + index = snprintf(&str[curr_index], str_len - curr_index, "%d", + i); + curr_index += index; + if (curr_index >= str_len) + break; + first = 0; + } - close(fd); + debug_printf("isolated CPUs list: package:%d curr_index:%d [%s]\n", id->pkg, curr_index ,str); - if (!retry) { - debug_printf("Failed mbox command even after retries\n"); - return -1; + snprintf(cpuset_cpus, sizeof(cpuset_cpus), "%s/cpuset.cpus", dir_name); + fd = open(cpuset_cpus, O_RDWR, 0); + if (fd < 0) { + return fd; } - return 0; -} -int isst_send_msr_command(unsigned int cpu, unsigned int msr, int write, - unsigned long long *req_resp) -{ - struct isst_if_msr_cmds msr_cmds; - const char *pathname = "/dev/isst_interface"; - int fd; + ret = write(fd, str, strlen(str)); + close(fd); - fd = open(pathname, O_RDWR); - if (fd < 0) - err(-1, "%s open failed", pathname); + if (ret == -1) { + debug_printf("Can't activate cpuset controller: Write failed\n"); + return ret; + } - msr_cmds.cmd_count = 1; - msr_cmds.msr_cmd[0].logical_cpu = cpu; - msr_cmds.msr_cmd[0].msr = msr; - msr_cmds.msr_cmd[0].read_write = write; - if (write) - msr_cmds.msr_cmd[0].data = *req_resp; - - if (ioctl(fd, ISST_IF_MSR_COMMAND, &msr_cmds) == -1) { - perror("ISST_IF_MSR_COMMAND"); - fprintf(outf, "Error: msr_cmd cpu:%d msr:%x read_write:%d\n", - cpu, msr, write); - } else { - if (!write) - *req_resp = msr_cmds.msr_cmd[0].data; + snprintf(cpuset_cpus, sizeof(cpuset_cpus), "%s/cpuset.cpus.partition", dir_name); - debug_printf( - "msr_cmd response: cpu:%d msr:%x rd_write:%x resp:%llx %llx\n", - cpu, msr, write, *req_resp, msr_cmds.msr_cmd[0].data); + fd = open(cpuset_cpus, O_RDWR, 0); + if (fd < 0) { + return fd; + } + + ret = write(fd, "isolated", strlen("isolated")); + if (ret == -1) { + debug_printf("Can't update to isolated\n"); + ret = write(fd, "root", strlen("root")); + if (ret == -1) + debug_printf("Can't update to root\n"); } close(fd); + if (ret < 0) + return ret; + return 0; } @@ -943,6 +981,11 @@ static int isst_fill_platform_info(void) const char *pathname = "/dev/isst_interface"; int fd; + if (is_clx_n_platform()) { + isst_platform_info.api_version = 1; + goto set_platform_ops; + } + fd = open(pathname, O_RDWR); if (fd < 0) err(-1, "%s open failed", pathname); @@ -959,77 +1002,96 @@ static int isst_fill_platform_info(void) printf("Incompatible API versions; Upgrade of tool is required\n"); return -1; } + +set_platform_ops: + if (isst_set_platform_ops(isst_platform_info.api_version)) { + fprintf(stderr, "Failed to set platform callbacks\n"); + exit(0); + } return 0; } -static void isst_print_extended_platform_info(void) +void get_isst_status(struct isst_id *id, void *arg1, void *arg2, void *arg3, void *arg4) { - int cp_state, cp_cap, fact_support = 0, pbf_support = 0; - struct isst_pkg_ctdp_level_info ctdp_level; struct isst_pkg_ctdp pkg_dev; - int ret, i, j; - FILE *filep; - struct isst_id id; - - for (i = 0; i < 256; ++i) { - char path[256]; - - snprintf(path, sizeof(path), - "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", i); - filep = fopen(path, "r"); - if (filep) - break; - } + struct isst_id *tid = (struct isst_id *)arg2; + int *mask = (int *)arg3; + int *max_level = (int *)arg4; + int j, ret; - if (!filep) + /* Only check the first cpu power domain */ + if (id->cpu < 0 || tid->cpu >= 0) return; - fclose(filep); - - set_isst_id(&id, i); - ret = isst_get_ctdp_levels(&id, &pkg_dev); + ret = isst_get_ctdp_levels(id, &pkg_dev); if (ret) return; - if (pkg_dev.enabled) { - fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is supported\n"); - } else { - fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is not supported\n"); - fprintf(outf, "Only performance level 0 (base level) is present\n"); - } + if (pkg_dev.enabled) + *mask |= BIT(0); if (pkg_dev.locked) - fprintf(outf, "TDP level change control is locked\n"); - else - fprintf(outf, "TDP level change control is unlocked, max level: %d \n", pkg_dev.levels); + *mask |= BIT(1); + + if (*max_level < pkg_dev.levels) + *max_level = pkg_dev.levels; for (j = 0; j <= pkg_dev.levels; ++j) { - ret = isst_get_ctdp_control(&id, j, &ctdp_level); + struct isst_pkg_ctdp_level_info ctdp_level; + + ret = isst_get_ctdp_control(id, j, &ctdp_level); if (ret) continue; - if (!fact_support && ctdp_level.fact_support) - fact_support = 1; + if (ctdp_level.fact_support) + *mask |= BIT(2); + + if (ctdp_level.pbf_support) + *mask |= BIT(3); + } + + tid->cpu = id->cpu; + tid->pkg = id->pkg; + tid->die = id->die; + tid->punit = id->punit; +} + +static void isst_print_extended_platform_info(void) +{ + int cp_state, cp_cap; + struct isst_id id; + int mask = 0, max_level = 0; - if (!pbf_support && ctdp_level.pbf_support) - pbf_support = 1; + id.cpu = -1; + for_each_online_power_domain_in_set(get_isst_status, NULL, &id, &mask, &max_level); + + if (mask & BIT(0)) { + fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is supported\n"); + } else { + fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is not supported\n"); + fprintf(outf, "Only performance level 0 (base level) is present\n"); } - if (fact_support) + if (mask & BIT(1)) + fprintf(outf, "TDP level change control is locked\n"); + else + fprintf(outf, "TDP level change control is unlocked, max level: %d\n", max_level); + + if (mask & BIT(2)) fprintf(outf, "Intel(R) SST-TF (feature turbo-freq) is supported\n"); else fprintf(outf, "Intel(R) SST-TF (feature turbo-freq) is not supported\n"); - if (pbf_support) + if (mask & BIT(3)) fprintf(outf, "Intel(R) SST-BF (feature base-freq) is supported\n"); else fprintf(outf, "Intel(R) SST-BF (feature base-freq) is not supported\n"); - ret = isst_read_pm_config(&id, &cp_state, &cp_cap); - if (ret) { + if (isst_read_pm_config(&id, &cp_state, &cp_cap)) { fprintf(outf, "Intel(R) SST-CP (feature core-power) status is unknown\n"); return; } + if (cp_cap) fprintf(outf, "Intel(R) SST-CP (feature core-power) is supported\n"); else @@ -1038,10 +1100,6 @@ static void isst_print_extended_platform_info(void) static void isst_print_platform_information(void) { - struct isst_if_platform_info platform_info; - const char *pathname = "/dev/isst_interface"; - int fd; - if (is_clx_n_platform()) { fprintf(stderr, "\nThis option in not supported on this platform\n"); exit(0); @@ -1051,25 +1109,15 @@ static void isst_print_platform_information(void) set_max_cpu_num(); create_cpu_map(); - fd = open(pathname, O_RDWR); - if (fd < 0) - err(-1, "%s open failed", pathname); - - if (ioctl(fd, ISST_IF_GET_PLATFORM_INFO, &platform_info) == -1) { - perror("ISST_IF_GET_PLATFORM_INFO"); - } else { - fprintf(outf, "Platform: API version : %d\n", - platform_info.api_version); - fprintf(outf, "Platform: Driver version : %d\n", - platform_info.driver_version); - fprintf(outf, "Platform: mbox supported : %d\n", - platform_info.mbox_supported); - fprintf(outf, "Platform: mmio supported : %d\n", - platform_info.mmio_supported); - isst_print_extended_platform_info(); - } - - close(fd); + fprintf(outf, "Platform: API version : %d\n", + isst_platform_info.api_version); + fprintf(outf, "Platform: Driver version : %d\n", + isst_platform_info.driver_version); + fprintf(outf, "Platform: mbox supported : %d\n", + isst_platform_info.mbox_supported); + fprintf(outf, "Platform: mmio supported : %d\n", + isst_platform_info.mmio_supported); + isst_print_extended_platform_info(); exit(0); } @@ -1110,7 +1158,7 @@ static void exec_on_get_ctdp_cpu(struct isst_id *id, void *arg1, void *arg2, voi exec_on_get_ctdp_cpu, isst_get_ctdp_##suffix, \ &ctdp, desc, &ctdp.object); \ else \ - for_each_online_package_in_set(exec_on_get_ctdp_cpu, \ + for_each_online_power_domain_in_set(exec_on_get_ctdp_cpu, \ isst_get_ctdp_##suffix, \ &ctdp, desc, \ &ctdp.object); \ @@ -1314,92 +1362,91 @@ static void dump_isst_config(int arg) if (max_target_cpus) for_each_online_target_cpu_in_set(fn, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(fn, NULL, NULL, NULL, NULL); + for_each_online_power_domain_in_set(fn, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } -static int set_uncore_min_max(struct isst_id *id, int max, int freq) -{ - char buffer[128], freq_str[16]; - int fd, ret, len; - - if (max) - snprintf(buffer, sizeof(buffer), - "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/max_freq_khz", id->pkg, id->die); - else - snprintf(buffer, sizeof(buffer), - "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/min_freq_khz", id->pkg, id->die); - - fd = open(buffer, O_WRONLY); - if (fd < 0) - return fd; - - snprintf(freq_str, sizeof(freq_str), "%d", freq); - len = strlen(freq_str); - ret = write(fd, freq_str, len); - if (ret == -1) { - close(fd); - return ret; - } - close(fd); - - return 0; -} - static void adjust_scaling_max_from_base_freq(int cpu); static void set_tdp_level_for_cpu(struct isst_id *id, void *arg1, void *arg2, void *arg3, void *arg4) { + struct isst_pkg_ctdp pkg_dev; int ret; + ret = isst_get_ctdp_levels(id, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Get TDP level failed", 0, 0); + isst_ctdp_display_information_end(outf); + exit(1); + } + + if (pkg_dev.current_level == tdp_level) { + debug_printf("TDP level already set. Skipped\n"); + goto display_result; + } + ret = isst_set_tdp_level(id, tdp_level); if (ret) { isst_display_error_info_message(1, "Set TDP level failed", 0, 0); isst_ctdp_display_information_end(outf); exit(1); - } else { - isst_display_result(id, outf, "perf-profile", "set_tdp_level", - ret); - if (force_online_offline) { - struct isst_pkg_ctdp_level_info ctdp_level; - - /* Wait for updated base frequencies */ - usleep(2000); - - /* Adjusting uncore freq */ - isst_get_uncore_p0_p1_info(id, tdp_level, &ctdp_level); - if (ctdp_level.uncore_pm) - set_uncore_min_max(id, 0, ctdp_level.uncore_pm * 100000); - - if (ctdp_level.uncore_p0) - set_uncore_min_max(id, 1, ctdp_level.uncore_p0 * 100000); - - fprintf(stderr, "Option is set to online/offline\n"); - ctdp_level.core_cpumask_size = - alloc_cpu_set(&ctdp_level.core_cpumask); - ret = isst_get_coremask_info(id, tdp_level, &ctdp_level); - if (ret) { - isst_display_error_info_message(1, "Can't get coremask, online/offline option is ignored", 0, 0); - return; - } - if (ctdp_level.cpu_count) { - int i, max_cpus = get_topo_max_cpus(); - for (i = 0; i < max_cpus; ++i) { - if (!is_cpu_in_power_domain(i, id)) - continue; - if (CPU_ISSET_S(i, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask)) { - fprintf(stderr, "online cpu %d\n", i); - set_cpu_online_offline(i, 1); - adjust_scaling_max_from_base_freq(i); - } else { - fprintf(stderr, "offline cpu %d\n", i); - set_cpu_online_offline(i, 0); - } + } + +display_result: + isst_display_result(id, outf, "perf-profile", "set_tdp_level", ret); + if (force_online_offline && id->cpu >= 0) { + struct isst_pkg_ctdp_level_info ctdp_level; + + /* Wait for updated base frequencies */ + usleep(2000); + + /* Adjusting uncore freq */ + isst_adjust_uncore_freq(id, tdp_level, &ctdp_level); + + fprintf(stderr, "Option is set to online/offline\n"); + ctdp_level.core_cpumask_size = + alloc_cpu_set(&ctdp_level.core_cpumask); + ret = isst_get_coremask_info(id, tdp_level, &ctdp_level); + if (ret) { + isst_display_error_info_message(1, "Can't get coremask, online/offline option is ignored", 0, 0); + goto free_mask; + } + + if (use_cgroupv2()) { + int ret; + + fprintf(stderr, "Using cgroup v2 in lieu of online/offline\n"); + ret = enable_cpuset_controller(); + if (ret) + goto use_offline; + + ret = isolate_cpus(id, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask, tdp_level); + if (ret) + goto use_offline; + + goto free_mask; + } + +use_offline: + if (ctdp_level.cpu_count) { + int i, max_cpus = get_topo_max_cpus(); + for (i = 0; i < max_cpus; ++i) { + if (!is_cpu_in_power_domain(i, id)) + continue; + if (CPU_ISSET_S(i, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask)) { + fprintf(stderr, "online cpu %d\n", i); + set_cpu_online_offline(i, 1); + adjust_scaling_max_from_base_freq(i); + } else { + fprintf(stderr, "offline cpu %d\n", i); + set_cpu_online_offline(i, 0); } } } +free_mask: + free_cpu_set(ctdp_level.core_cpumask); } } @@ -1425,7 +1472,7 @@ static void set_tdp_level(int arg) for_each_online_target_cpu_in_set(set_tdp_level_for_cpu, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(set_tdp_level_for_cpu, NULL, + for_each_online_power_domain_in_set(set_tdp_level_for_cpu, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } @@ -1463,7 +1510,7 @@ static void dump_pbf_config_for_cpu(struct isst_id *id, void *arg1, void *arg2, exit(1); } else { isst_pbf_display_information(id, outf, tdp_level, &pbf_info); - isst_get_pbf_info_complete(&pbf_info); + free_cpu_set(pbf_info.core_cpumask); } } @@ -1494,7 +1541,7 @@ static void dump_pbf_config(int arg) if (max_target_cpus) for_each_online_target_cpu_in_set(fn, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(fn, NULL, NULL, NULL, NULL); + for_each_online_power_domain_in_set(fn, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } @@ -1662,6 +1709,9 @@ static void set_scaling_min_to_cpuinfo_max(struct isst_id *id) { int i; + if (id->cpu < 0) + return; + for (i = 0; i < get_topo_max_cpus(); ++i) { if (!is_cpu_in_power_domain(i, id)) continue; @@ -1679,6 +1729,9 @@ static void set_scaling_min_to_cpuinfo_min(struct isst_id *id) { int i; + if (id->cpu < 0) + return; + for (i = 0; i < get_topo_max_cpus(); ++i) { if (!is_cpu_in_power_domain(i, id)) continue; @@ -1758,6 +1811,9 @@ static int set_pbf_core_power(struct isst_id *id) struct isst_pkg_ctdp pkg_dev; int ret; + if (id->cpu < 0) + return 0; + ret = isst_get_ctdp_levels(id, &pkg_dev); if (ret) { debug_printf("isst_get_ctdp_levels failed"); @@ -1900,7 +1956,7 @@ static void set_pbf_enable(int arg) for_each_online_target_cpu_in_set(set_pbf_for_cpu, NULL, NULL, NULL, &enable); else - for_each_online_package_in_set(set_pbf_for_cpu, NULL, NULL, + for_each_online_power_domain_in_set(set_pbf_for_cpu, NULL, NULL, NULL, &enable); isst_ctdp_display_information_end(outf); } @@ -1946,7 +2002,7 @@ static void dump_fact_config(int arg) for_each_online_target_cpu_in_set(dump_fact_config_for_cpu, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(dump_fact_config_for_cpu, NULL, + for_each_online_power_domain_in_set(dump_fact_config_for_cpu, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } @@ -2003,7 +2059,7 @@ static void set_fact_for_cpu(struct isst_id *id, void *arg1, void *arg2, void *a struct isst_pkg_ctdp pkg_dev; ret = isst_get_ctdp_levels(id, &pkg_dev); - if (!ret) + if (!ret && id->cpu >= 0) ret = isst_set_trl(id, fact_trl); if (ret && auto_mode) isst_pm_qos_config(id, 0, 0); @@ -2055,7 +2111,7 @@ static void set_fact_enable(int arg) for_each_online_target_cpu_in_set(set_fact_for_cpu, NULL, NULL, NULL, &enable); else - for_each_online_package_in_set(set_fact_for_cpu, NULL, NULL, + for_each_online_power_domain_in_set(set_fact_for_cpu, NULL, NULL, NULL, &enable); isst_ctdp_display_information_end(outf); @@ -2194,7 +2250,7 @@ static void set_clos_enable(int arg) for_each_online_target_cpu_in_set(enable_clos_qos_config, NULL, NULL, NULL, &enable); else - for_each_online_package_in_set(enable_clos_qos_config, NULL, + for_each_online_power_domain_in_set(enable_clos_qos_config, NULL, NULL, NULL, &enable); isst_ctdp_display_information_end(outf); } @@ -2205,6 +2261,9 @@ static void dump_clos_config_for_cpu(struct isst_id *id, void *arg1, void *arg2, struct isst_clos_config clos_config; int ret; + if (id->cpu < 0) + return; + ret = isst_pm_get_clos(id, current_clos, &clos_config); if (ret) isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0); @@ -2233,7 +2292,7 @@ static void dump_clos_config(int arg) for_each_online_target_cpu_in_set(dump_clos_config_for_cpu, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(dump_clos_config_for_cpu, NULL, + for_each_online_power_domain_in_set(dump_clos_config_for_cpu, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } @@ -2269,7 +2328,7 @@ static void dump_clos_info(int arg) for_each_online_target_cpu_in_set(get_clos_info_for_cpu, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(get_clos_info_for_cpu, NULL, + for_each_online_power_domain_in_set(get_clos_info_for_cpu, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); @@ -2281,6 +2340,9 @@ static void set_clos_config_for_cpu(struct isst_id *id, void *arg1, void *arg2, struct isst_clos_config clos_config; int ret; + if (id->cpu < 0) + return; + clos_config.epp = clos_epp; clos_config.clos_prop_prio = clos_prop_prio; clos_config.clos_min = clos_min; @@ -2341,7 +2403,7 @@ static void set_clos_config(int arg) for_each_online_target_cpu_in_set(set_clos_config_for_cpu, NULL, NULL, NULL, NULL); else - for_each_online_package_in_set(set_clos_config_for_cpu, NULL, + for_each_online_power_domain_in_set(set_clos_config_for_cpu, NULL, NULL, NULL, NULL); isst_ctdp_display_information_end(outf); } @@ -2508,7 +2570,7 @@ static void process_trl(int arg) for_each_online_target_cpu_in_set(get_set_trl, NULL, NULL, NULL, &arg); else - for_each_online_package_in_set(get_set_trl, NULL, + for_each_online_power_domain_in_set(get_set_trl, NULL, NULL, NULL, &arg); isst_ctdp_display_information_end(outf); } @@ -2683,7 +2745,7 @@ static void parse_cmd_args(int argc, int start, char **argv) break; case 'd': clos_desired = atoi(optarg); - clos_desired /= DISP_FREQ_MULTIPLIER; + clos_desired /= isst_get_disp_freq_multiplier(); break; case 'e': clos_epp = atoi(optarg); @@ -2694,11 +2756,11 @@ static void parse_cmd_args(int argc, int start, char **argv) break; case 'n': clos_min = atoi(optarg); - clos_min /= DISP_FREQ_MULTIPLIER; + clos_min /= isst_get_disp_freq_multiplier(); break; case 'm': clos_max = atoi(optarg); - clos_max /= DISP_FREQ_MULTIPLIER; + clos_max /= isst_get_disp_freq_multiplier(); break; case 'p': clos_priority_type = atoi(optarg); @@ -2882,6 +2944,7 @@ static void usage(void) printf("\t[-b|--oob : Start a daemon to process HFI events for perf profile change from Out of Band agent.\n"); printf("\t[-n|--no-daemon : Don't run as daemon. By default --oob will turn on daemon mode\n"); printf("\t[-w|--delay : Delay for reading config level state change in OOB poll mode.\n"); + printf("\t[-g|--cgroupv2 : Try to use cgroup v2 CPU isolation instead of CPU online/offline.\n"); printf("\nResult format\n"); printf("\tResult display uses a common format for each command:\n"); printf("\tResults are formatted in text/JSON with\n"); @@ -2918,6 +2981,7 @@ static void cmdline(int argc, char **argv) int oob_mode = 0; int poll_interval = -1; int no_daemon = 0; + int mbox_delay = 0, mbox_retries = 3; static struct option long_options[] = { { "all-cpus-online", no_argument, 0, 'a' }, @@ -2933,6 +2997,7 @@ static void cmdline(int argc, char **argv) { "oob", no_argument, 0, 'b' }, { "no-daemon", no_argument, 0, 'n' }, { "poll-interval", required_argument, 0, 'w' }, + { "cgroupv2", required_argument, 0, 'g' }, { 0, 0, 0, 0 } }; @@ -2958,8 +3023,12 @@ static void cmdline(int argc, char **argv) fclose(fp); } + ret = isst_fill_platform_info(); + if (ret) + goto out; + progname = argv[0]; - while ((opt = getopt_long_only(argc, argv, "+c:df:hio:vabw:n", long_options, + while ((opt = getopt_long_only(argc, argv, "+c:df:hio:vabw:ng", long_options, &option_index)) != -1) { switch (opt) { case 'a': @@ -3018,6 +3087,9 @@ static void cmdline(int argc, char **argv) } poll_interval = ret; break; + case 'g': + cgroupv2 = 1; + break; default: usage(); } @@ -3027,6 +3099,10 @@ static void cmdline(int argc, char **argv) usage(); exit(0); } + + isst_update_platform_param(ISST_PARAM_MBOX_DELAY, mbox_delay); + isst_update_platform_param(ISST_PARAM_MBOX_RETRIES, mbox_retries); + set_max_cpu_num(); if (force_cpus_online) force_all_cpus_online(); @@ -3044,9 +3120,6 @@ static void cmdline(int argc, char **argv) } if (!is_clx_n_platform()) { - ret = isst_fill_platform_info(); - if (ret) - goto out; process_command(argc, argv, isst_help_cmds, isst_cmds); } else { process_command(argc, argv, clx_n_help_cmds, clx_n_cmds); diff --git a/tools/power/x86/intel-speed-select/isst-core-mbox.c b/tools/power/x86/intel-speed-select/isst-core-mbox.c new file mode 100644 index 000000000000..24bea57f4ff5 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-core-mbox.c @@ -0,0 +1,1066 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Enumerate and control features for Mailbox Interface + * Copyright (c) 2023 Intel Corporation. + */ +#include "isst.h" + +static int mbox_delay; +static int mbox_retries = 3; + +#define MAX_TRL_LEVELS_EMR 5 + +static int mbox_get_disp_freq_multiplier(void) +{ + return DISP_FREQ_MULTIPLIER; +} + +static int mbox_get_trl_max_levels(void) +{ + if (is_emr_platform()) + return MAX_TRL_LEVELS_EMR; + + return 3; +} + +static char *mbox_get_trl_level_name(int level) +{ + if (is_emr_platform()) { + static char level_str[18]; + + if (level >= MAX_TRL_LEVELS_EMR) + return NULL; + + snprintf(level_str, sizeof(level_str), "level-%d", level); + return level_str; + } + + switch (level) { + case 0: + return "sse"; + case 1: + return "avx2"; + case 2: + return "avx512"; + default: + return NULL; + } +} + +static void mbox_update_platform_param(enum isst_platform_param param, int value) +{ + switch (param) { + case ISST_PARAM_MBOX_DELAY: + mbox_delay = value; + break; + case ISST_PARAM_MBOX_RETRIES: + mbox_retries = value; + break; + default: + break; + } +} + +static int mbox_is_punit_valid(struct isst_id *id) +{ + if (id->cpu < 0) + return 0; + + if (id->pkg < 0 || id->die < 0 || id->punit) + return 0; + + return 1; +} + +static int _send_mmio_command(unsigned int cpu, unsigned int reg, int write, + unsigned int *value) +{ + struct isst_if_io_regs io_regs; + const char *pathname = "/dev/isst_interface"; + int cmd; + FILE *outf = get_output_file(); + int fd; + + debug_printf("mmio_cmd cpu:%d reg:%d write:%d\n", cpu, reg, write); + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + io_regs.req_count = 1; + io_regs.io_reg[0].logical_cpu = cpu; + io_regs.io_reg[0].reg = reg; + cmd = ISST_IF_IO_CMD; + if (write) { + io_regs.io_reg[0].read_write = 1; + io_regs.io_reg[0].value = *value; + } else { + io_regs.io_reg[0].read_write = 0; + } + + if (ioctl(fd, cmd, &io_regs) == -1) { + if (errno == ENOTTY) { + perror("ISST_IF_IO_COMMAND\n"); + fprintf(stderr, "Check presence of kernel modules: isst_if_mmio\n"); + exit(0); + } + fprintf(outf, "Error: mmio_cmd cpu:%d reg:%x read_write:%x\n", + cpu, reg, write); + } else { + if (!write) + *value = io_regs.io_reg[0].value; + + debug_printf( + "mmio_cmd response: cpu:%d reg:%x rd_write:%x resp:%x\n", + cpu, reg, write, *value); + } + + close(fd); + + return 0; +} + +int _send_mbox_command(unsigned int cpu, unsigned char command, + unsigned char sub_command, unsigned int parameter, + unsigned int req_data, unsigned int *resp) +{ + const char *pathname = "/dev/isst_interface"; + int fd, retry; + struct isst_if_mbox_cmds mbox_cmds = { 0 }; + + debug_printf( + "mbox_send: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x\n", + cpu, command, sub_command, parameter, req_data); + + if (!is_skx_based_platform() && command == CONFIG_CLOS && + sub_command != CLOS_PM_QOS_CONFIG) { + unsigned int value; + int write = 0; + int clos_id, core_id, ret = 0; + + debug_printf("CPU %d\n", cpu); + + if (parameter & BIT(MBOX_CMD_WRITE_BIT)) { + value = req_data; + write = 1; + } + + switch (sub_command) { + case CLOS_PQR_ASSOC: + core_id = parameter & 0xff; + ret = _send_mmio_command( + cpu, PQR_ASSOC_OFFSET + core_id * 4, write, + &value); + if (!ret && !write) + *resp = value; + break; + case CLOS_PM_CLOS: + clos_id = parameter & 0x03; + ret = _send_mmio_command( + cpu, PM_CLOS_OFFSET + clos_id * 4, write, + &value); + if (!ret && !write) + *resp = value; + break; + case CLOS_STATUS: + break; + default: + break; + } + return ret; + } + + mbox_cmds.cmd_count = 1; + mbox_cmds.mbox_cmd[0].logical_cpu = cpu; + mbox_cmds.mbox_cmd[0].command = command; + mbox_cmds.mbox_cmd[0].sub_command = sub_command; + mbox_cmds.mbox_cmd[0].parameter = parameter; + mbox_cmds.mbox_cmd[0].req_data = req_data; + + if (mbox_delay) + usleep(mbox_delay * 1000); + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + retry = mbox_retries; + do { + if (ioctl(fd, ISST_IF_MBOX_COMMAND, &mbox_cmds) == -1) { + if (errno == ENOTTY) { + perror("ISST_IF_MBOX_COMMAND\n"); + fprintf(stderr, "Check presence of kernel modules: isst_if_mbox_pci or isst_if_mbox_msr\n"); + exit(0); + } + debug_printf( + "Error: mbox_cmd cpu:%d command:%x sub_command:%x parameter:%x req_data:%x errorno:%d\n", + cpu, command, sub_command, parameter, req_data, errno); + --retry; + } else { + *resp = mbox_cmds.mbox_cmd[0].resp_data; + debug_printf( + "mbox_cmd response: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x resp:%x\n", + cpu, command, sub_command, parameter, req_data, *resp); + break; + } + } while (retry); + + close(fd); + + if (!retry) { + debug_printf("Failed mbox command even after retries\n"); + return -1; + + } + + return 0; +} + +static int mbox_read_pm_config(struct isst_id *id, int *cp_state, int *cp_cap) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, READ_PM_CONFIG, PM_FEATURE, 0, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d READ_PM_CONFIG resp:%x\n", id->cpu, resp); + + *cp_state = resp & BIT(16); + *cp_cap = resp & BIT(0) ? 1 : 0; + + return 0; +} + +static int mbox_get_config_levels(struct isst_id *id, struct isst_pkg_ctdp *pkg_dev) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_LEVELS_INFO, 0, 0, &resp); + if (ret) { + pkg_dev->levels = 0; + pkg_dev->locked = 1; + pkg_dev->current_level = 0; + pkg_dev->version = 0; + pkg_dev->enabled = 0; + return 0; + } + + debug_printf("cpu:%d CONFIG_TDP_GET_LEVELS_INFO resp:%x\n", id->cpu, resp); + + pkg_dev->version = resp & 0xff; + pkg_dev->levels = (resp >> 8) & 0xff; + pkg_dev->current_level = (resp >> 16) & 0xff; + pkg_dev->locked = !!(resp & BIT(24)); + pkg_dev->enabled = !!(resp & BIT(31)); + + return 0; +} + +static int mbox_get_ctdp_control(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + int cp_state, cp_cap; + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_TDP_CONTROL, 0, + config_index, &resp); + if (ret) + return ret; + + ctdp_level->fact_support = resp & BIT(0); + ctdp_level->pbf_support = !!(resp & BIT(1)); + ctdp_level->fact_enabled = !!(resp & BIT(16)); + ctdp_level->pbf_enabled = !!(resp & BIT(17)); + + ret = isst_read_pm_config(id, &cp_state, &cp_cap); + if (ret) { + debug_printf("cpu:%d pm_config is not supported\n", id->cpu); + } else { + debug_printf("cpu:%d pm_config SST-CP state:%d cap:%d\n", id->cpu, cp_state, cp_cap); + ctdp_level->sst_cp_support = cp_cap; + ctdp_level->sst_cp_enabled = cp_state; + } + + debug_printf( + "cpu:%d CONFIG_TDP_GET_TDP_CONTROL resp:%x fact_support:%d pbf_support: %d fact_enabled:%d pbf_enabled:%d\n", + id->cpu, resp, ctdp_level->fact_support, ctdp_level->pbf_support, + ctdp_level->fact_enabled, ctdp_level->pbf_enabled); + + return 0; +} + +static void _get_uncore_p0_p1_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ctdp_level->uncore_pm = 0; + ctdp_level->uncore_p0 = 0; + ctdp_level->uncore_p1 = 0; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_RATIO_INFO, 0, + (BIT(16) | config_index) , &resp); + if (ret) { + goto try_uncore_mbox; + } + + ctdp_level->uncore_p0 = resp & GENMASK(7, 0); + ctdp_level->uncore_p1 = (resp & GENMASK(15, 8)) >> 8; + ctdp_level->uncore_pm = (resp & GENMASK(31, 24)) >> 24; + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_RATIO_INFO resp:%x uncore p0:%d uncore p1:%d uncore pm:%d\n", + id->cpu, config_index, resp, ctdp_level->uncore_p0, ctdp_level->uncore_p1, + ctdp_level->uncore_pm); + + return; + +try_uncore_mbox: + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_UNCORE_P0_P1_INFO, 0, + config_index, &resp); + if (ret) { + ctdp_level->uncore_p0 = 0; + ctdp_level->uncore_p1 = 0; + return; + } + + ctdp_level->uncore_p0 = resp & GENMASK(7, 0); + ctdp_level->uncore_p1 = (resp & GENMASK(15, 8)) >> 8; + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_UNCORE_P0_P1_INFO resp:%x uncore p0:%d uncore p1:%d\n", + id->cpu, config_index, resp, ctdp_level->uncore_p0, + ctdp_level->uncore_p1); +} + +static int _set_uncore_min_max(struct isst_id *id, int max, int freq) +{ + char buffer[128], freq_str[16]; + int fd, ret, len; + + if (max) + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/max_freq_khz", id->pkg, id->die); + else + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/min_freq_khz", id->pkg, id->die); + + fd = open(buffer, O_WRONLY); + if (fd < 0) + return fd; + + snprintf(freq_str, sizeof(freq_str), "%d", freq); + len = strlen(freq_str); + ret = write(fd, freq_str, len); + if (ret == -1) { + close(fd); + return ret; + } + close(fd); + + return 0; +} + +static void mbox_adjust_uncore_freq(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + _get_uncore_p0_p1_info(id, config_index, ctdp_level); + if (ctdp_level->uncore_pm) + _set_uncore_min_max(id, 0, ctdp_level->uncore_pm * 100000); + + if (ctdp_level->uncore_p0) + _set_uncore_min_max(id, 1, ctdp_level->uncore_p0 * 100000); +} + +static void _get_p1_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_P1_INFO, 0, + config_index, &resp); + if (ret) { + ctdp_level->sse_p1 = 0; + ctdp_level->avx2_p1 = 0; + ctdp_level->avx512_p1 = 0; + return; + } + + ctdp_level->sse_p1 = resp & GENMASK(7, 0); + ctdp_level->avx2_p1 = (resp & GENMASK(15, 8)) >> 8; + ctdp_level->avx512_p1 = (resp & GENMASK(23, 16)) >> 16; + ctdp_level->amx_p1 = (resp & GENMASK(31, 24)) >> 24; + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_P1_INFO resp:%x sse_p1:%d avx2_p1:%d avx512_p1:%d amx_p1:%d\n", + id->cpu, config_index, resp, ctdp_level->sse_p1, + ctdp_level->avx2_p1, ctdp_level->avx512_p1, ctdp_level->amx_p1); +} + +static void _get_uncore_mem_freq(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_MEM_FREQ, + 0, config_index, &resp); + if (ret) { + ctdp_level->mem_freq = 0; + return; + } + + ctdp_level->mem_freq = resp & GENMASK(7, 0); + if (is_spr_platform() || is_emr_platform()) { + ctdp_level->mem_freq *= 200; + } else if (is_icx_platform()) { + if (ctdp_level->mem_freq < 7) { + ctdp_level->mem_freq = (12 - ctdp_level->mem_freq) * 133.33 * 2 * 10; + ctdp_level->mem_freq /= 10; + if (ctdp_level->mem_freq % 10 > 5) + ctdp_level->mem_freq++; + } else { + ctdp_level->mem_freq = 0; + } + } else { + ctdp_level->mem_freq = 0; + } + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_MEM_FREQ resp:%x uncore mem_freq:%d\n", + id->cpu, config_index, resp, ctdp_level->mem_freq); +} + +static int mbox_get_tdp_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_TDP_INFO, + 0, config_index, &resp); + if (ret) { + isst_display_error_info_message(1, "Invalid level, Can't get TDP information at level", 1, config_index); + return ret; + } + + ctdp_level->pkg_tdp = resp & GENMASK(14, 0); + ctdp_level->tdp_ratio = (resp & GENMASK(23, 16)) >> 16; + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_TDP_INFO resp:%x tdp_ratio:%d pkg_tdp:%d\n", + id->cpu, config_index, resp, ctdp_level->tdp_ratio, + ctdp_level->pkg_tdp); + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_TJMAX_INFO, + 0, config_index, &resp); + if (ret) + return ret; + + ctdp_level->t_proc_hot = resp & GENMASK(7, 0); + + _get_uncore_p0_p1_info(id, config_index, ctdp_level); + _get_p1_info(id, config_index, ctdp_level); + _get_uncore_mem_freq(id, config_index, ctdp_level); + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_TJMAX_INFO resp:%x t_proc_hot:%d\n", + id->cpu, config_index, resp, ctdp_level->t_proc_hot); + + return 0; +} + +static int mbox_get_pwr_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_PWR_INFO, + 0, config_index, &resp); + if (ret) + return ret; + + ctdp_level->pkg_max_power = resp & GENMASK(14, 0); + ctdp_level->pkg_min_power = (resp & GENMASK(30, 16)) >> 16; + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_PWR_INFO resp:%x pkg_max_power:%d pkg_min_power:%d\n", + id->cpu, config_index, resp, ctdp_level->pkg_max_power, + ctdp_level->pkg_min_power); + + return 0; +} + +static int mbox_get_coremask_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int i, ret; + + ctdp_level->cpu_count = 0; + for (i = 0; i < 2; ++i) { + unsigned long long mask; + int cpu_count = 0; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_CORE_MASK, 0, + (i << 8) | config_index, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d ctdp:%d mask:%d CONFIG_TDP_GET_CORE_MASK resp:%x\n", + id->cpu, config_index, i, resp); + + mask = (unsigned long long)resp << (32 * i); + set_cpu_mask_from_punit_coremask(id, mask, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask, + &cpu_count); + ctdp_level->cpu_count += cpu_count; + debug_printf("cpu:%d ctdp:%d mask:%d cpu count:%d\n", id->cpu, + config_index, i, ctdp_level->cpu_count); + } + + return 0; +} + +static int mbox_get_get_trl(struct isst_id *id, int level, int avx_level, int *trl) +{ + unsigned int req, resp; + int ret; + + req = level | (avx_level << 16); + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, + &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_TURBO_LIMIT_RATIOS req:%x resp:%x\n", + id->cpu, req, resp); + + trl[0] = resp & GENMASK(7, 0); + trl[1] = (resp & GENMASK(15, 8)) >> 8; + trl[2] = (resp & GENMASK(23, 16)) >> 16; + trl[3] = (resp & GENMASK(31, 24)) >> 24; + + req = level | BIT(8) | (avx_level << 16); + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_GET_TURBO_LIMIT req:%x resp:%x\n", id->cpu, + req, resp); + + trl[4] = resp & GENMASK(7, 0); + trl[5] = (resp & GENMASK(15, 8)) >> 8; + trl[6] = (resp & GENMASK(23, 16)) >> 16; + trl[7] = (resp & GENMASK(31, 24)) >> 24; + + return 0; +} + +static int mbox_get_get_trls(struct isst_id *id, int level, struct isst_pkg_ctdp_level_info *ctdp_level) +{ + int trl_max_levels = isst_get_trl_max_levels(); + int i, ret; + + for (i = 0; i < trl_max_levels; i++) { + ret = mbox_get_get_trl(id, level, i, ctdp_level->trl_ratios[i]); + if (ret) + return ret; + } + return 0; +} + +static int mbox_get_trl_bucket_info(struct isst_id *id, int level, unsigned long long *buckets_info) +{ + int ret; + + debug_printf("cpu:%d bucket info via MSR\n", id->cpu); + + *buckets_info = 0; + + ret = isst_send_msr_command(id->cpu, 0x1ae, 0, buckets_info); + if (ret) + return ret; + + debug_printf("cpu:%d bucket info via MSR successful 0x%llx\n", id->cpu, + *buckets_info); + + return 0; +} + +static int mbox_set_tdp_level(struct isst_id *id, int tdp_level) +{ + unsigned int resp; + int ret; + + + if (isst_get_config_tdp_lock_status(id)) { + isst_display_error_info_message(1, "TDP is locked", 0, 0); + return -1; + + } + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_SET_LEVEL, 0, + tdp_level, &resp); + if (ret) { + isst_display_error_info_message(1, "Set TDP level failed for level", 1, tdp_level); + return ret; + } + + return 0; +} + +static int mbox_get_pbf_info(struct isst_id *id, int level, struct isst_pbf_info *pbf_info) +{ + int max_punit_core, max_mask_index; + unsigned int req, resp; + int i, ret; + + max_punit_core = get_max_punit_core_id(id); + max_mask_index = max_punit_core > 32 ? 2 : 1; + + for (i = 0; i < max_mask_index; ++i) { + unsigned long long mask; + int count; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_PBF_GET_CORE_MASK_INFO, + 0, (i << 8) | level, &resp); + if (ret) + break; + + debug_printf( + "cpu:%d CONFIG_TDP_PBF_GET_CORE_MASK_INFO resp:%x\n", + id->cpu, resp); + + mask = (unsigned long long)resp << (32 * i); + set_cpu_mask_from_punit_coremask(id, mask, + pbf_info->core_cpumask_size, + pbf_info->core_cpumask, + &count); + } + + req = level; + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO resp:%x\n", id->cpu, + resp); + + pbf_info->p1_low = resp & 0xff; + pbf_info->p1_high = (resp & GENMASK(15, 8)) >> 8; + + req = level; + ret = _send_mbox_command( + id->cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TDP_INFO, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TDP_INFO resp:%x\n", id->cpu, resp); + + pbf_info->tdp = resp & 0xffff; + + req = level; + ret = _send_mbox_command( + id->cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TJ_MAX_INFO, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TJ_MAX_INFO resp:%x\n", id->cpu, + resp); + pbf_info->t_control = (resp >> 8) & 0xff; + pbf_info->t_prochot = resp & 0xff; + + return 0; +} + +static int mbox_set_pbf_fact_status(struct isst_id *id, int pbf, int enable) +{ + struct isst_pkg_ctdp pkg_dev; + struct isst_pkg_ctdp_level_info ctdp_level; + int current_level; + unsigned int req = 0, resp; + int ret; + + ret = isst_get_ctdp_levels(id, &pkg_dev); + if (ret) + debug_printf("cpu:%d No support for dynamic ISST\n", id->cpu); + + current_level = pkg_dev.current_level; + + ret = isst_get_ctdp_control(id, current_level, &ctdp_level); + if (ret) + return ret; + + if (pbf) { + if (ctdp_level.fact_enabled) + req = BIT(16); + + if (enable) + req |= BIT(17); + else + req &= ~BIT(17); + } else { + + if (enable && !ctdp_level.sst_cp_enabled) + isst_display_error_info_message(0, "Make sure to execute before: core-power enable", 0, 0); + + if (ctdp_level.pbf_enabled) + req = BIT(17); + + if (enable) + req |= BIT(16); + else + req &= ~BIT(16); + } + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_SET_TDP_CONTROL, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_SET_TDP_CONTROL pbf/fact:%d req:%x\n", + id->cpu, pbf, req); + + return 0; +} + +static int _get_fact_bucket_info(struct isst_id *id, int level, + struct isst_fact_bucket_info *bucket_info) +{ + unsigned int resp; + int i, k, ret; + + for (i = 0; i < 2; ++i) { + int j; + + ret = _send_mbox_command( + id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES, 0, + (i << 8) | level, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES index:%d level:%d resp:%x\n", + id->cpu, i, level, resp); + + for (j = 0; j < 4; ++j) { + bucket_info[j + (i * 4)].hp_cores = + (resp >> (j * 8)) & 0xff; + } + } + + for (k = 0; k < 3; ++k) { + for (i = 0; i < 2; ++i) { + int j; + + ret = _send_mbox_command( + id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS, 0, + (k << 16) | (i << 8) | level, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS index:%d level:%d avx:%d resp:%x\n", + id->cpu, i, level, k, resp); + + for (j = 0; j < 4; ++j) { + bucket_info[j + (i * 4)].hp_ratios[k] = + (resp >> (j * 8)) & 0xff; + } + } + } + + return 0; +} + +static int mbox_get_fact_info(struct isst_id *id, int level, int fact_bucket, struct isst_fact_info *fact_info) +{ + unsigned int resp; + int j, ret, print; + + ret = _send_mbox_command(id->cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO, 0, + level, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO resp:%x\n", + id->cpu, resp); + + fact_info->lp_ratios[0] = resp & 0xff; + fact_info->lp_ratios[1] = (resp >> 8) & 0xff; + fact_info->lp_ratios[2] = (resp >> 16) & 0xff; + + ret = _get_fact_bucket_info(id, level, fact_info->bucket_info); + if (ret) + return ret; + + print = 0; + for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { + if (fact_bucket != 0xff && fact_bucket != j) + continue; + + if (!fact_info->bucket_info[j].hp_cores) + break; + + print = 1; + } + if (!print) { + isst_display_error_info_message(1, "Invalid bucket", 0, 0); + return -1; + } + + return 0; +} + +static int mbox_get_clos_information(struct isst_id *id, int *enable, int *type) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", id->cpu, resp); + + if (resp & BIT(1)) + *enable = 1; + else + *enable = 0; + + if (resp & BIT(2)) + *type = 1; + else + *type = 0; + + return 0; +} + +static int _write_pm_config(struct isst_id *id, int cp_state) +{ + unsigned int req, resp; + int ret; + + if (cp_state) + req = BIT(16); + else + req = 0; + + ret = _send_mbox_command(id->cpu, WRITE_PM_CONFIG, PM_FEATURE, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d WRITE_PM_CONFIG resp:%x\n", id->cpu, resp); + + return 0; +} + +static int mbox_pm_qos_config(struct isst_id *id, int enable_clos, int priority_type) +{ + unsigned int req, resp; + int ret; + + if (!enable_clos) { + struct isst_pkg_ctdp pkg_dev; + struct isst_pkg_ctdp_level_info ctdp_level; + + ret = isst_get_ctdp_levels(id, &pkg_dev); + if (ret) { + debug_printf("isst_get_ctdp_levels\n"); + return ret; + } + + ret = isst_get_ctdp_control(id, pkg_dev.current_level, + &ctdp_level); + if (ret) + return ret; + + if (ctdp_level.fact_enabled) { + isst_display_error_info_message(1, "Ignoring request, turbo-freq feature is still enabled", 0, 0); + return -EINVAL; + } + ret = _write_pm_config(id, 0); + if (ret) + isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); + } else { + ret = _write_pm_config(id, 1); + if (ret) + isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); + } + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, + &resp); + if (ret) { + isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0); + return ret; + } + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", id->cpu, resp); + + req = resp; + + if (enable_clos) + req = req | BIT(1); + else + req = req & ~BIT(1); + + if (priority_type > 1) + isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0); + + if (priority_type) + req = req | BIT(2); + else + req = req & ~BIT(2); + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, + BIT(MBOX_CMD_WRITE_BIT), req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG priority type:%d req:%x\n", id->cpu, + priority_type, req); + + return 0; +} + +static int mbox_pm_get_clos(struct isst_id *id, int clos, struct isst_clos_config *clos_config) +{ + unsigned int resp; + int ret; + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_CLOS, clos, 0, + &resp); + if (ret) + return ret; + + clos_config->epp = resp & 0x0f; + clos_config->clos_prop_prio = (resp >> 4) & 0x0f; + clos_config->clos_min = (resp >> 8) & 0xff; + clos_config->clos_max = (resp >> 16) & 0xff; + clos_config->clos_desired = (resp >> 24) & 0xff; + + return 0; +} + +static int mbox_set_clos(struct isst_id *id, int clos, struct isst_clos_config *clos_config) +{ + unsigned int req, resp; + unsigned int param; + int ret; + + req = clos_config->epp & 0x0f; + req |= (clos_config->clos_prop_prio & 0x0f) << 4; + req |= (clos_config->clos_min & 0xff) << 8; + req |= (clos_config->clos_max & 0xff) << 16; + req |= (clos_config->clos_desired & 0xff) << 24; + + param = BIT(MBOX_CMD_WRITE_BIT) | clos; + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_CLOS, param, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_CLOS param:%x req:%x\n", id->cpu, param, req); + + return 0; +} + +static int mbox_clos_get_assoc_status(struct isst_id *id, int *clos_id) +{ + unsigned int resp; + unsigned int param; + int core_id, ret; + + core_id = find_phy_core_num(id->cpu); + param = core_id; + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x resp:%x\n", id->cpu, param, + resp); + *clos_id = (resp >> 16) & 0x03; + + return 0; +} + +static int mbox_clos_associate(struct isst_id *id, int clos_id) +{ + unsigned int req, resp; + unsigned int param; + int core_id, ret; + + req = (clos_id & 0x03) << 16; + core_id = find_phy_core_num(id->cpu); + param = BIT(MBOX_CMD_WRITE_BIT) | core_id; + + ret = _send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, + req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x req:%x\n", id->cpu, param, + req); + + return 0; +} + +static struct isst_platform_ops mbox_ops = { + .get_disp_freq_multiplier = mbox_get_disp_freq_multiplier, + .get_trl_max_levels = mbox_get_trl_max_levels, + .get_trl_level_name = mbox_get_trl_level_name, + .update_platform_param = mbox_update_platform_param, + .is_punit_valid = mbox_is_punit_valid, + .read_pm_config = mbox_read_pm_config, + .get_config_levels = mbox_get_config_levels, + .get_ctdp_control = mbox_get_ctdp_control, + .get_tdp_info = mbox_get_tdp_info, + .get_pwr_info = mbox_get_pwr_info, + .get_coremask_info = mbox_get_coremask_info, + .get_get_trl = mbox_get_get_trl, + .get_get_trls = mbox_get_get_trls, + .get_trl_bucket_info = mbox_get_trl_bucket_info, + .set_tdp_level = mbox_set_tdp_level, + .get_pbf_info = mbox_get_pbf_info, + .set_pbf_fact_status = mbox_set_pbf_fact_status, + .get_fact_info = mbox_get_fact_info, + .adjust_uncore_freq = mbox_adjust_uncore_freq, + .get_clos_information = mbox_get_clos_information, + .pm_qos_config = mbox_pm_qos_config, + .pm_get_clos = mbox_pm_get_clos, + .set_clos = mbox_set_clos, + .clos_get_assoc_status = mbox_clos_get_assoc_status, + .clos_associate = mbox_clos_associate, +}; + +struct isst_platform_ops *mbox_get_platform_ops(void) +{ + return &mbox_ops; +} diff --git a/tools/power/x86/intel-speed-select/isst-core-tpmi.c b/tools/power/x86/intel-speed-select/isst-core-tpmi.c new file mode 100644 index 000000000000..19caa9c78d41 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-core-tpmi.c @@ -0,0 +1,787 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Enumerate and control features for TPMI Interface + * Copyright (c) 2022 Intel Corporation. + */ + +#include <linux/isst_if.h> +#include "isst.h" + +int tpmi_process_ioctl(int ioctl_no, void *info) +{ + const char *pathname = "/dev/isst_interface"; + int fd; + + if (is_debug_enabled()) { + debug_printf("Issue IOCTL: "); + switch (ioctl_no) { + case ISST_IF_CORE_POWER_STATE: + debug_printf("ISST_IF_CORE_POWER_STATE\n"); + break; + case ISST_IF_CLOS_PARAM: + debug_printf("ISST_IF_CLOS_PARAM\n"); + break; + case ISST_IF_CLOS_ASSOC: + debug_printf("ISST_IF_CLOS_ASSOC\n"); + break; + case ISST_IF_PERF_LEVELS: + debug_printf("ISST_IF_PERF_LEVELS\n"); + break; + case ISST_IF_PERF_SET_LEVEL: + debug_printf("ISST_IF_PERF_SET_LEVEL\n"); + break; + case ISST_IF_PERF_SET_FEATURE: + debug_printf("ISST_IF_PERF_SET_FEATURE\n"); + break; + case ISST_IF_GET_PERF_LEVEL_INFO: + debug_printf("ISST_IF_GET_PERF_LEVEL_INFO\n"); + break; + case ISST_IF_GET_PERF_LEVEL_CPU_MASK: + debug_printf("ISST_IF_GET_PERF_LEVEL_CPU_MASK\n"); + break; + case ISST_IF_GET_BASE_FREQ_INFO: + debug_printf("ISST_IF_GET_BASE_FREQ_INFO\n"); + break; + case ISST_IF_GET_BASE_FREQ_CPU_MASK: + debug_printf("ISST_IF_GET_BASE_FREQ_CPU_MASK\n"); + break; + case ISST_IF_GET_TURBO_FREQ_INFO: + debug_printf("ISST_IF_GET_TURBO_FREQ_INFO\n"); + break; + case ISST_IF_COUNT_TPMI_INSTANCES: + debug_printf("ISST_IF_COUNT_TPMI_INSTANCES\n"); + break; + default: + debug_printf("%d\n", ioctl_no); + break; + } + } + + fd = open(pathname, O_RDWR); + if (fd < 0) + return -1; + + if (ioctl(fd, ioctl_no, info) == -1) { + debug_printf("IOCTL %d Failed\n", ioctl_no); + close(fd); + return -1; + } + + close(fd); + + return 0; +} + +static int tpmi_get_disp_freq_multiplier(void) +{ + return 1; +} + +static int tpmi_get_trl_max_levels(void) +{ + return TRL_MAX_LEVELS; +} + +static char *tpmi_get_trl_level_name(int level) +{ + switch (level) { + case 0: + return "level-0"; + case 1: + return "level-1"; + case 2: + return "level-2"; + case 3: + return "level-3"; + case 4: + return "level-4"; + case 5: + return "level-5"; + case 6: + return "level-6"; + case 7: + return "level-7"; + default: + return NULL; + } +} + + +static void tpmi_update_platform_param(enum isst_platform_param param, int value) +{ + /* No params need to be updated for now */ +} + +static int tpmi_is_punit_valid(struct isst_id *id) +{ + struct isst_tpmi_instance_count info; + int ret; + + if (id->punit < 0) + return 0; + + info.socket_id = id->pkg; + ret = tpmi_process_ioctl(ISST_IF_COUNT_TPMI_INSTANCES, &info); + if (ret == -1) + return 0; + + if (info.valid_mask & BIT(id->punit)) + return 1; + + return 0; +} + +static int tpmi_read_pm_config(struct isst_id *id, int *cp_state, int *cp_cap) +{ + struct isst_core_power info; + int ret; + + info.get_set = 0; + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &info); + if (ret == -1) + return ret; + + *cp_state = info.enable; + *cp_cap = info.supported; + + return 0; +} + +int tpmi_get_config_levels(struct isst_id *id, struct isst_pkg_ctdp *pkg_dev) +{ + struct isst_perf_level_info info; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + + ret = tpmi_process_ioctl(ISST_IF_PERF_LEVELS, &info); + if (ret == -1) + return ret; + + pkg_dev->version = info.feature_rev; + pkg_dev->levels = info.max_level; + pkg_dev->locked = info.locked; + pkg_dev->current_level = info.current_level; + pkg_dev->locked = info.locked; + pkg_dev->enabled = info.enabled; + + return 0; +} + +static int tpmi_get_ctdp_control(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + struct isst_core_power core_power_info; + struct isst_perf_level_info info; + int level_mask; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + + ret = tpmi_process_ioctl(ISST_IF_PERF_LEVELS, &info); + if (ret == -1) + return -1; + + if (config_index != 0xff) + level_mask = 1 << config_index; + else + level_mask = config_index; + + if (!(info.level_mask & level_mask)) + return -1; + + ctdp_level->fact_support = info.sst_tf_support; + ctdp_level->pbf_support = info.sst_bf_support; + ctdp_level->fact_enabled = !!(info.feature_state & BIT(1)); + ctdp_level->pbf_enabled = !!(info.feature_state & BIT(0)); + + core_power_info.get_set = 0; + core_power_info.socket_id = id->pkg; + core_power_info.power_domain_id = id->punit; + + ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &core_power_info); + if (ret == -1) + return ret; + + ctdp_level->sst_cp_support = core_power_info.supported; + ctdp_level->sst_cp_enabled = core_power_info.enable; + + debug_printf + ("cpu:%d CONFIG_TDP_GET_TDP_CONTROL fact_support:%d pbf_support: %d fact_enabled:%d pbf_enabled:%d\n", + id->cpu, ctdp_level->fact_support, ctdp_level->pbf_support, + ctdp_level->fact_enabled, ctdp_level->pbf_enabled); + + return 0; +} + +static int tpmi_get_tdp_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + struct isst_perf_level_data_info info; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + + ret = tpmi_process_ioctl(ISST_IF_GET_PERF_LEVEL_INFO, &info); + if (ret == -1) + return ret; + + ctdp_level->pkg_tdp = info.thermal_design_power_w; + ctdp_level->tdp_ratio = info.tdp_ratio; + ctdp_level->sse_p1 = info.base_freq_mhz; + ctdp_level->avx2_p1 = info.base_freq_avx2_mhz; + ctdp_level->avx512_p1 = info.base_freq_avx512_mhz; + ctdp_level->amx_p1 = info.base_freq_amx_mhz; + + ctdp_level->t_proc_hot = info.tjunction_max_c; + ctdp_level->mem_freq = info.max_memory_freq_mhz; + ctdp_level->cooling_type = info.cooling_type; + + ctdp_level->uncore_p0 = info.p0_fabric_freq_mhz; + ctdp_level->uncore_p1 = info.p1_fabric_freq_mhz; + ctdp_level->uncore_pm = info.pm_fabric_freq_mhz; + + debug_printf + ("cpu:%d ctdp:%d CONFIG_TDP_GET_TDP_INFO tdp_ratio:%d pkg_tdp:%d ctdp_level->t_proc_hot:%d\n", + id->cpu, config_index, ctdp_level->tdp_ratio, ctdp_level->pkg_tdp, + ctdp_level->t_proc_hot); + + return 0; +} + +static int tpmi_get_pwr_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + /* TBD */ + ctdp_level->pkg_max_power = 0; + ctdp_level->pkg_min_power = 0; + + debug_printf + ("cpu:%d ctdp:%d CONFIG_TDP_GET_PWR_INFO pkg_max_power:%d pkg_min_power:%d\n", + id->cpu, config_index, ctdp_level->pkg_max_power, + ctdp_level->pkg_min_power); + + return 0; +} + +int tpmi_get_coremask_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + struct isst_perf_level_cpu_mask info; + int ret, cpu_count; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + info.punit_cpu_map = 1; + + ret = tpmi_process_ioctl(ISST_IF_GET_PERF_LEVEL_CPU_MASK, &info); + if (ret == -1) + return ret; + + set_cpu_mask_from_punit_coremask(id, info.mask, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask, &cpu_count); + ctdp_level->cpu_count = cpu_count; + + debug_printf("cpu:%d ctdp:%d core_mask ino cpu count:%d\n", + id->cpu, config_index, ctdp_level->cpu_count); + + return 0; +} + +static int tpmi_get_get_trls(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + struct isst_perf_level_data_info info; + int ret, i, j; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + + ret = tpmi_process_ioctl(ISST_IF_GET_PERF_LEVEL_INFO, &info); + if (ret == -1) + return ret; + + if (info.max_buckets > TRL_MAX_BUCKETS) + info.max_buckets = TRL_MAX_BUCKETS; + + if (info.max_trl_levels > TRL_MAX_LEVELS) + info.max_trl_levels = TRL_MAX_LEVELS; + + for (i = 0; i < info.max_trl_levels; ++i) + for (j = 0; j < info.max_buckets; ++j) + ctdp_level->trl_ratios[i][j] = info.trl_freq_mhz[i][j]; + + return 0; +} + +static int tpmi_get_get_trl(struct isst_id *id, int level, int config_index, + int *trl) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + int ret, i; + + ret = tpmi_get_get_trls(id, config_index, &ctdp_level); + if (ret) + return ret; + + /* FIX ME: Just return for level 0 */ + for (i = 0; i < 8; ++i) + trl[i] = ctdp_level.trl_ratios[0][i]; + + return 0; +} + +static int tpmi_get_trl_bucket_info(struct isst_id *id, int config_index, + unsigned long long *buckets_info) +{ + struct isst_perf_level_data_info info; + unsigned char *mask = (unsigned char *)buckets_info; + int ret, i; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + + ret = tpmi_process_ioctl(ISST_IF_GET_PERF_LEVEL_INFO, &info); + if (ret == -1) + return ret; + + if (info.max_buckets > TRL_MAX_BUCKETS) + info.max_buckets = TRL_MAX_BUCKETS; + + for (i = 0; i < info.max_buckets; ++i) + mask[i] = info.bucket_core_counts[i]; + + debug_printf("cpu:%d TRL bucket info: 0x%llx\n", id->cpu, + *buckets_info); + + return 0; +} + +static int tpmi_set_tdp_level(struct isst_id *id, int tdp_level) +{ + struct isst_perf_level_control info; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = tdp_level; + + ret = tpmi_process_ioctl(ISST_IF_PERF_SET_LEVEL, &info); + if (ret == -1) + return ret; + + return 0; +} + +static int _pbf_get_coremask_info(struct isst_id *id, int config_index, + struct isst_pbf_info *pbf_info) +{ + struct isst_perf_level_cpu_mask info; + int ret, cpu_count; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + info.punit_cpu_map = 1; + + ret = tpmi_process_ioctl(ISST_IF_GET_BASE_FREQ_CPU_MASK, &info); + if (ret == -1) + return ret; + + set_cpu_mask_from_punit_coremask(id, info.mask, + pbf_info->core_cpumask_size, + pbf_info->core_cpumask, &cpu_count); + + debug_printf("cpu:%d ctdp:%d pbf core_mask info cpu count:%d\n", + id->cpu, config_index, cpu_count); + + return 0; +} + +static int tpmi_get_pbf_info(struct isst_id *id, int level, + struct isst_pbf_info *pbf_info) +{ + struct isst_base_freq_info info; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = level; + + ret = tpmi_process_ioctl(ISST_IF_GET_BASE_FREQ_INFO, &info); + if (ret == -1) + return ret; + + pbf_info->p1_low = info.low_base_freq_mhz; + pbf_info->p1_high = info.high_base_freq_mhz; + pbf_info->tdp = info.thermal_design_power_w; + pbf_info->t_prochot = info.tjunction_max_c; + + debug_printf("cpu:%d ctdp:%d pbf info:%d:%d:%d:%d\n", + id->cpu, level, pbf_info->p1_low, pbf_info->p1_high, + pbf_info->tdp, pbf_info->t_prochot); + + return _pbf_get_coremask_info(id, level, pbf_info); +} + +static int tpmi_set_pbf_fact_status(struct isst_id *id, int pbf, int enable) +{ + struct isst_pkg_ctdp pkg_dev; + struct isst_pkg_ctdp_level_info ctdp_level; + int current_level; + struct isst_perf_feature_control info; + int ret; + + ret = isst_get_ctdp_levels(id, &pkg_dev); + if (ret) + debug_printf("cpu:%d No support for dynamic ISST\n", id->cpu); + + current_level = pkg_dev.current_level; + + ret = isst_get_ctdp_control(id, current_level, &ctdp_level); + if (ret) + return ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + + info.feature = 0; + + if (pbf) { + if (ctdp_level.fact_enabled) + info.feature |= BIT(1); + + if (enable) + info.feature |= BIT(0); + else + info.feature &= ~BIT(0); + } else { + + if (enable && !ctdp_level.sst_cp_enabled) + isst_display_error_info_message(0, + "Make sure to execute before: core-power enable", + 0, 0); + + if (ctdp_level.pbf_enabled) + info.feature |= BIT(0); + + if (enable) + info.feature |= BIT(1); + else + info.feature &= ~BIT(1); + } + + ret = tpmi_process_ioctl(ISST_IF_PERF_SET_FEATURE, &info); + if (ret == -1) + return ret; + + return 0; +} + +static int tpmi_get_fact_info(struct isst_id *id, int level, int fact_bucket, + struct isst_fact_info *fact_info) +{ + struct isst_turbo_freq_info info; + int i, j; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = level; + + ret = tpmi_process_ioctl(ISST_IF_GET_TURBO_FREQ_INFO, &info); + if (ret == -1) + return ret; + + for (i = 0; i < info.max_clip_freqs; ++i) + fact_info->lp_ratios[i] = info.lp_clip_freq_mhz[i]; + + if (info.max_buckets > TRL_MAX_BUCKETS) + info.max_buckets = TRL_MAX_BUCKETS; + + if (info.max_trl_levels > TRL_MAX_LEVELS) + info.max_trl_levels = TRL_MAX_LEVELS; + + for (i = 0; i < info.max_trl_levels; ++i) { + for (j = 0; j < info.max_buckets; ++j) + fact_info->bucket_info[j].hp_ratios[i] = + info.trl_freq_mhz[i][j]; + } + + for (i = 0; i < info.max_buckets; ++i) + fact_info->bucket_info[i].hp_cores = info.bucket_core_counts[i]; + + return 0; +} + +static void _set_uncore_min_max(struct isst_id *id, int max, int freq) +{ + DIR *dir; + FILE *filep; + struct dirent *entry; + char buffer[512]; + unsigned int tmp_id; + int ret; + + dir = opendir("/sys/devices/system/cpu/intel_uncore_frequency/"); + if (!dir) + return; + + while ((entry = readdir(dir)) != NULL ) { + /* Check domain_id */ + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/%s/domain_id", entry->d_name); + + filep = fopen(buffer, "r"); + if (!filep) + goto end; + + ret = fscanf(filep, "%u", &tmp_id); + fclose(filep); + if (ret != 1) + goto end; + + if (tmp_id != id->punit) + continue; + + /* Check package_id */ + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/%s/package_id", entry->d_name); + + filep = fopen(buffer, "r"); + if (!filep) + goto end; + + ret = fscanf(filep, "%u", &tmp_id); + fclose(filep); + + if (ret != 1) + goto end; + + if (tmp_id != id->pkg) + continue; + + /* Found the right sysfs path, adjust and quit */ + if (max) + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/%s/max_freq_khz", entry->d_name); + else + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/intel_uncore_frequency/%s/min_freq_khz", entry->d_name); + + filep = fopen(buffer, "w"); + if (!filep) + goto end; + + fprintf(filep, "%d\n", freq); + fclose(filep); + break; + } + +end: + closedir(dir); +} + +static void tpmi_adjust_uncore_freq(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + struct isst_perf_level_data_info info; + int ret; + + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.level = config_index; + + ret = tpmi_process_ioctl(ISST_IF_GET_PERF_LEVEL_INFO, &info); + if (ret == -1) + return; + + ctdp_level->uncore_p0 = info.p0_fabric_freq_mhz; + ctdp_level->uncore_p1 = info.p1_fabric_freq_mhz; + ctdp_level->uncore_pm = info.pm_fabric_freq_mhz; + + if (ctdp_level->uncore_pm) + _set_uncore_min_max(id, 0, ctdp_level->uncore_pm * 100000); + + if (ctdp_level->uncore_p0) + _set_uncore_min_max(id, 1, ctdp_level->uncore_p0 * 100000); + + return; +} + +static int tpmi_get_clos_information(struct isst_id *id, int *enable, int *type) +{ + struct isst_core_power info; + int ret; + + info.get_set = 0; + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &info); + if (ret == -1) + return ret; + + *enable = info.enable; + *type = info.priority_type; + + return 0; +} + +static int tpmi_pm_qos_config(struct isst_id *id, int enable_clos, + int priority_type) +{ + struct isst_core_power info; + int ret; + + info.get_set = 1; + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.enable = enable_clos; + info.priority_type = priority_type; + ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &info); + if (ret == -1) + return ret; + + return 0; +} + +int tpmi_pm_get_clos(struct isst_id *id, int clos, + struct isst_clos_config *clos_config) +{ + struct isst_clos_param info; + int ret; + + info.get_set = 0; + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.clos = clos; + + ret = tpmi_process_ioctl(ISST_IF_CLOS_PARAM, &info); + if (ret == -1) + return ret; + + clos_config->epp = 0; + clos_config->clos_prop_prio = info.prop_prio; + clos_config->clos_min = info.min_freq_mhz; + clos_config->clos_max = info.max_freq_mhz; + clos_config->clos_desired = 0; + + debug_printf("cpu:%d clos:%d min:%d max:%d\n", id->cpu, clos, + clos_config->clos_min, clos_config->clos_max); + + return 0; +} + +int tpmi_set_clos(struct isst_id *id, int clos, + struct isst_clos_config *clos_config) +{ + struct isst_clos_param info; + int ret; + + info.get_set = 1; + info.socket_id = id->pkg; + info.power_domain_id = id->punit; + info.clos = clos; + info.prop_prio = clos_config->clos_prop_prio; + + info.min_freq_mhz = clos_config->clos_min; + info.max_freq_mhz = clos_config->clos_max; + + if (info.min_freq_mhz <= 0xff) + info.min_freq_mhz *= 100; + if (info.max_freq_mhz <= 0xff) + info.max_freq_mhz *= 100; + + ret = tpmi_process_ioctl(ISST_IF_CLOS_PARAM, &info); + if (ret == -1) + return ret; + + debug_printf("set cpu:%d clos:%d min:%d max:%d\n", id->cpu, clos, + clos_config->clos_min, clos_config->clos_max); + + return 0; +} + +static int tpmi_clos_get_assoc_status(struct isst_id *id, int *clos_id) +{ + struct isst_if_clos_assoc_cmds assoc_cmds; + int ret; + + assoc_cmds.cmd_count = 1; + assoc_cmds.get_set = 0; + assoc_cmds.punit_cpu_map = 1; + assoc_cmds.assoc_info[0].logical_cpu = find_phy_core_num(id->cpu); + assoc_cmds.assoc_info[0].socket_id = id->pkg; + assoc_cmds.assoc_info[0].power_domain_id = id->punit; + + ret = tpmi_process_ioctl(ISST_IF_CLOS_ASSOC, &assoc_cmds); + if (ret == -1) + return ret; + + *clos_id = assoc_cmds.assoc_info[0].clos; + + return 0; +} + +static int tpmi_clos_associate(struct isst_id *id, int clos_id) +{ + struct isst_if_clos_assoc_cmds assoc_cmds; + int ret; + + assoc_cmds.cmd_count = 1; + assoc_cmds.get_set = 1; + assoc_cmds.punit_cpu_map = 1; + assoc_cmds.assoc_info[0].logical_cpu = find_phy_core_num(id->cpu); + assoc_cmds.assoc_info[0].clos = clos_id; + assoc_cmds.assoc_info[0].socket_id = id->pkg; + assoc_cmds.assoc_info[0].power_domain_id = id->punit; + + ret = tpmi_process_ioctl(ISST_IF_CLOS_ASSOC, &assoc_cmds); + if (ret == -1) + return ret; + + return 0; +} + +static struct isst_platform_ops tpmi_ops = { + .get_disp_freq_multiplier = tpmi_get_disp_freq_multiplier, + .get_trl_max_levels = tpmi_get_trl_max_levels, + .get_trl_level_name = tpmi_get_trl_level_name, + .update_platform_param = tpmi_update_platform_param, + .is_punit_valid = tpmi_is_punit_valid, + .read_pm_config = tpmi_read_pm_config, + .get_config_levels = tpmi_get_config_levels, + .get_ctdp_control = tpmi_get_ctdp_control, + .get_tdp_info = tpmi_get_tdp_info, + .get_pwr_info = tpmi_get_pwr_info, + .get_coremask_info = tpmi_get_coremask_info, + .get_get_trl = tpmi_get_get_trl, + .get_get_trls = tpmi_get_get_trls, + .get_trl_bucket_info = tpmi_get_trl_bucket_info, + .set_tdp_level = tpmi_set_tdp_level, + .get_pbf_info = tpmi_get_pbf_info, + .set_pbf_fact_status = tpmi_set_pbf_fact_status, + .get_fact_info = tpmi_get_fact_info, + .adjust_uncore_freq = tpmi_adjust_uncore_freq, + .get_clos_information = tpmi_get_clos_information, + .pm_qos_config = tpmi_pm_qos_config, + .pm_get_clos = tpmi_pm_get_clos, + .set_clos = tpmi_set_clos, + .clos_get_assoc_status = tpmi_clos_get_assoc_status, + .clos_associate = tpmi_clos_associate, +}; + +struct isst_platform_ops *tpmi_get_platform_ops(void) +{ + return &tpmi_ops; +} diff --git a/tools/power/x86/intel-speed-select/isst-core.c b/tools/power/x86/intel-speed-select/isst-core.c index 2bfc118c4b87..f55fef4c13a7 100644 --- a/tools/power/x86/intel-speed-select/isst-core.c +++ b/tools/power/x86/intel-speed-select/isst-core.c @@ -6,304 +6,141 @@ #include "isst.h" -int isst_write_pm_config(struct isst_id *id, int cp_state) -{ - unsigned int req, resp; - int ret; - - if (cp_state) - req = BIT(16); - else - req = 0; - - ret = isst_send_mbox_command(id->cpu, WRITE_PM_CONFIG, PM_FEATURE, 0, req, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d WRITE_PM_CONFIG resp:%x\n", id->cpu, resp); +static struct isst_platform_ops *isst_ops; + +#define CHECK_CB(_name) \ + do { \ + if (!isst_ops || !isst_ops->_name) { \ + fprintf(stderr, "Invalid ops\n"); \ + exit(0); \ + } \ + } while (0) + +int isst_set_platform_ops(int api_version) +{ + switch (api_version) { + case 1: + isst_ops = mbox_get_platform_ops(); + break; + case 2: + isst_ops = tpmi_get_platform_ops(); + break; + default: + isst_ops = NULL; + break; + } + if (!isst_ops) + return -1; return 0; } -int isst_read_pm_config(struct isst_id *id, int *cp_state, int *cp_cap) +void isst_update_platform_param(enum isst_platform_param param, int value) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, READ_PM_CONFIG, PM_FEATURE, 0, 0, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d READ_PM_CONFIG resp:%x\n", id->cpu, resp); + CHECK_CB(update_platform_param); - *cp_state = resp & BIT(16); - *cp_cap = resp & BIT(0) ? 1 : 0; - - return 0; + isst_ops->update_platform_param(param, value); } -int isst_get_ctdp_levels(struct isst_id *id, struct isst_pkg_ctdp *pkg_dev) +int isst_get_disp_freq_multiplier(void) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_LEVELS_INFO, 0, 0, &resp); - if (ret) { - pkg_dev->levels = 0; - pkg_dev->locked = 1; - pkg_dev->current_level = 0; - pkg_dev->version = 0; - pkg_dev->enabled = 0; - return 0; - } + CHECK_CB(get_disp_freq_multiplier); + return isst_ops->get_disp_freq_multiplier(); +} - debug_printf("cpu:%d CONFIG_TDP_GET_LEVELS_INFO resp:%x\n", id->cpu, resp); +int isst_get_trl_max_levels(void) +{ + CHECK_CB(get_trl_max_levels); + return isst_ops->get_trl_max_levels(); +} - pkg_dev->version = resp & 0xff; - pkg_dev->levels = (resp >> 8) & 0xff; - pkg_dev->current_level = (resp >> 16) & 0xff; - pkg_dev->locked = !!(resp & BIT(24)); - pkg_dev->enabled = !!(resp & BIT(31)); +char *isst_get_trl_level_name(int level) +{ + CHECK_CB(get_trl_level_name); + return isst_ops->get_trl_level_name(level); +} - return 0; +int isst_is_punit_valid(struct isst_id *id) +{ + CHECK_CB(is_punit_valid); + return isst_ops->is_punit_valid(id); } -int isst_get_ctdp_control(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_send_msr_command(unsigned int cpu, unsigned int msr, int write, + unsigned long long *req_resp) { - int cp_state, cp_cap; - unsigned int resp; - int ret; + struct isst_if_msr_cmds msr_cmds; + const char *pathname = "/dev/isst_interface"; + FILE *outf = get_output_file(); + int fd; - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_TDP_CONTROL, 0, - config_index, &resp); - if (ret) - return ret; + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); - ctdp_level->fact_support = resp & BIT(0); - ctdp_level->pbf_support = !!(resp & BIT(1)); - ctdp_level->fact_enabled = !!(resp & BIT(16)); - ctdp_level->pbf_enabled = !!(resp & BIT(17)); + msr_cmds.cmd_count = 1; + msr_cmds.msr_cmd[0].logical_cpu = cpu; + msr_cmds.msr_cmd[0].msr = msr; + msr_cmds.msr_cmd[0].read_write = write; + if (write) + msr_cmds.msr_cmd[0].data = *req_resp; - ret = isst_read_pm_config(id, &cp_state, &cp_cap); - if (ret) { - debug_printf("cpu:%d pm_config is not supported\n", id->cpu); + if (ioctl(fd, ISST_IF_MSR_COMMAND, &msr_cmds) == -1) { + perror("ISST_IF_MSR_COMMAND"); + fprintf(outf, "Error: msr_cmd cpu:%d msr:%x read_write:%d\n", + cpu, msr, write); } else { - debug_printf("cpu:%d pm_config SST-CP state:%d cap:%d\n", id->cpu, cp_state, cp_cap); - ctdp_level->sst_cp_support = cp_cap; - ctdp_level->sst_cp_enabled = cp_state; - } - - debug_printf( - "cpu:%d CONFIG_TDP_GET_TDP_CONTROL resp:%x fact_support:%d pbf_support: %d fact_enabled:%d pbf_enabled:%d\n", - id->cpu, resp, ctdp_level->fact_support, ctdp_level->pbf_support, - ctdp_level->fact_enabled, ctdp_level->pbf_enabled); - - return 0; -} - -int isst_get_tdp_info(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) -{ - unsigned int resp; - int ret; + if (!write) + *req_resp = msr_cmds.msr_cmd[0].data; - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_TDP_INFO, - 0, config_index, &resp); - if (ret) { - isst_display_error_info_message(1, "Invalid level, Can't get TDP information at level", 1, config_index); - return ret; + debug_printf( + "msr_cmd response: cpu:%d msr:%x rd_write:%x resp:%llx %llx\n", + cpu, msr, write, *req_resp, msr_cmds.msr_cmd[0].data); } - ctdp_level->pkg_tdp = resp & GENMASK(14, 0); - ctdp_level->tdp_ratio = (resp & GENMASK(23, 16)) >> 16; + close(fd); - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_TDP_INFO resp:%x tdp_ratio:%d pkg_tdp:%d\n", - id->cpu, config_index, resp, ctdp_level->tdp_ratio, - ctdp_level->pkg_tdp); return 0; } -int isst_get_pwr_info(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_read_pm_config(struct isst_id *id, int *cp_state, int *cp_cap) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_PWR_INFO, - 0, config_index, &resp); - if (ret) - return ret; - - ctdp_level->pkg_max_power = resp & GENMASK(14, 0); - ctdp_level->pkg_min_power = (resp & GENMASK(30, 16)) >> 16; - - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_PWR_INFO resp:%x pkg_max_power:%d pkg_min_power:%d\n", - id->cpu, config_index, resp, ctdp_level->pkg_max_power, - ctdp_level->pkg_min_power); - - return 0; + CHECK_CB(read_pm_config); + return isst_ops->read_pm_config(id, cp_state, cp_cap); } -void isst_get_uncore_p0_p1_info(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_get_ctdp_levels(struct isst_id *id, struct isst_pkg_ctdp *pkg_dev) { - unsigned int resp; - int ret; - - ctdp_level->uncore_pm = 0; - ctdp_level->uncore_p0 = 0; - ctdp_level->uncore_p1 = 0; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_RATIO_INFO, 0, - (BIT(16) | config_index), &resp); - if (ret) - goto try_uncore_mbox; - - ctdp_level->uncore_p0 = resp & GENMASK(7, 0); - ctdp_level->uncore_p1 = (resp & GENMASK(15, 8)) >> 8; - ctdp_level->uncore_pm = (resp & GENMASK(31, 24)) >> 24; - - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_RATIO_INFO resp:%x uncore p0:%d uncore p1:%d uncore pm:%d\n", - id->cpu, config_index, resp, ctdp_level->uncore_p0, ctdp_level->uncore_p1, - ctdp_level->uncore_pm); - - return; - -try_uncore_mbox: - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_UNCORE_P0_P1_INFO, 0, - config_index, &resp); - if (ret) { - ctdp_level->uncore_p0 = 0; - ctdp_level->uncore_p1 = 0; - return; - } - - ctdp_level->uncore_p0 = resp & GENMASK(7, 0); - ctdp_level->uncore_p1 = (resp & GENMASK(15, 8)) >> 8; - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_UNCORE_P0_P1_INFO resp:%x uncore p0:%d uncore p1:%d\n", - id->cpu, config_index, resp, ctdp_level->uncore_p0, - ctdp_level->uncore_p1); + CHECK_CB(get_config_levels); + return isst_ops->get_config_levels(id, pkg_dev); } -void isst_get_p1_info(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_get_ctdp_control(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) { - unsigned int resp; - int ret; - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_P1_INFO, 0, - config_index, &resp); - if (ret) { - ctdp_level->sse_p1 = 0; - ctdp_level->avx2_p1 = 0; - ctdp_level->avx512_p1 = 0; - return; - } - - ctdp_level->sse_p1 = resp & GENMASK(7, 0); - ctdp_level->avx2_p1 = (resp & GENMASK(15, 8)) >> 8; - ctdp_level->avx512_p1 = (resp & GENMASK(23, 16)) >> 16; - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_P1_INFO resp:%x sse_p1:%d avx2_p1:%d avx512_p1:%d\n", - id->cpu, config_index, resp, ctdp_level->sse_p1, - ctdp_level->avx2_p1, ctdp_level->avx512_p1); + CHECK_CB(get_ctdp_control); + return isst_ops->get_ctdp_control(id, config_index, ctdp_level); } -void isst_get_uncore_mem_freq(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_get_tdp_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_MEM_FREQ, - 0, config_index, &resp); - if (ret) { - ctdp_level->mem_freq = 0; - return; - } - - ctdp_level->mem_freq = resp & GENMASK(7, 0); - if (is_spr_platform()) { - ctdp_level->mem_freq *= 200; - } else if (is_icx_platform()) { - if (ctdp_level->mem_freq < 7) { - ctdp_level->mem_freq = (12 - ctdp_level->mem_freq) * 133.33 * 2 * 10; - ctdp_level->mem_freq /= 10; - if (ctdp_level->mem_freq % 10 > 5) - ctdp_level->mem_freq++; - } else { - ctdp_level->mem_freq = 0; - } - } else { - ctdp_level->mem_freq = 0; - } - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_MEM_FREQ resp:%x uncore mem_freq:%d\n", - id->cpu, config_index, resp, ctdp_level->mem_freq); + CHECK_CB(get_tdp_info); + return isst_ops->get_tdp_info(id, config_index, ctdp_level); } -int isst_get_tjmax_info(struct isst_id *id, int config_index, - struct isst_pkg_ctdp_level_info *ctdp_level) +int isst_get_pwr_info(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_GET_TJMAX_INFO, - 0, config_index, &resp); - if (ret) - return ret; - - ctdp_level->t_proc_hot = resp & GENMASK(7, 0); - - debug_printf( - "cpu:%d ctdp:%d CONFIG_TDP_GET_TJMAX_INFO resp:%x t_proc_hot:%d\n", - id->cpu, config_index, resp, ctdp_level->t_proc_hot); - - return 0; + CHECK_CB(get_pwr_info); + return isst_ops->get_pwr_info(id, config_index, ctdp_level); } int isst_get_coremask_info(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level) { - unsigned int resp; - int i, ret; - - ctdp_level->cpu_count = 0; - for (i = 0; i < 2; ++i) { - unsigned long long mask; - int cpu_count = 0; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_CORE_MASK, 0, - (i << 8) | config_index, &resp); - if (ret) - return ret; - - debug_printf( - "cpu:%d ctdp:%d mask:%d CONFIG_TDP_GET_CORE_MASK resp:%x\n", - id->cpu, config_index, i, resp); - - mask = (unsigned long long)resp << (32 * i); - set_cpu_mask_from_punit_coremask(id, mask, - ctdp_level->core_cpumask_size, - ctdp_level->core_cpumask, - &cpu_count); - ctdp_level->cpu_count += cpu_count; - debug_printf("cpu:%d ctdp:%d mask:%d cpu count:%d\n", id->cpu, - config_index, i, ctdp_level->cpu_count); - } - - return 0; + CHECK_CB(get_coremask_info); + return isst_ops->get_coremask_info(id, config_index, ctdp_level); } int isst_get_get_trl_from_msr(struct isst_id *id, int *trl) @@ -329,89 +166,33 @@ int isst_get_get_trl_from_msr(struct isst_id *id, int *trl) int isst_get_get_trl(struct isst_id *id, int level, int avx_level, int *trl) { - unsigned int req, resp; - int ret; - - req = level | (avx_level << 16); - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, - &resp); - if (ret) - return ret; - - debug_printf( - "cpu:%d CONFIG_TDP_GET_TURBO_LIMIT_RATIOS req:%x resp:%x\n", - id->cpu, req, resp); - - trl[0] = resp & GENMASK(7, 0); - trl[1] = (resp & GENMASK(15, 8)) >> 8; - trl[2] = (resp & GENMASK(23, 16)) >> 16; - trl[3] = (resp & GENMASK(31, 24)) >> 24; - - req = level | BIT(8) | (avx_level << 16); - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_GET_TURBO_LIMIT req:%x resp:%x\n", id->cpu, - req, resp); - - trl[4] = resp & GENMASK(7, 0); - trl[5] = (resp & GENMASK(15, 8)) >> 8; - trl[6] = (resp & GENMASK(23, 16)) >> 16; - trl[7] = (resp & GENMASK(31, 24)) >> 24; - - return 0; + CHECK_CB(get_get_trl); + return isst_ops->get_get_trl(id, level, avx_level, trl); } -int isst_get_trl_bucket_info(struct isst_id *id, unsigned long long *buckets_info) +int isst_get_get_trls(struct isst_id *id, int level, struct isst_pkg_ctdp_level_info *ctdp_level) { - int ret; - - debug_printf("cpu:%d bucket info via MSR\n", id->cpu); - - *buckets_info = 0; - - ret = isst_send_msr_command(id->cpu, 0x1ae, 0, buckets_info); - if (ret) - return ret; - - debug_printf("cpu:%d bucket info via MSR successful 0x%llx\n", id->cpu, - *buckets_info); + CHECK_CB(get_get_trls); + return isst_ops->get_get_trls(id, level, ctdp_level); +} - return 0; +int isst_get_trl_bucket_info(struct isst_id *id, int level, unsigned long long *buckets_info) +{ + CHECK_CB(get_trl_bucket_info); + return isst_ops->get_trl_bucket_info(id, level, buckets_info); } int isst_set_tdp_level(struct isst_id *id, int tdp_level) { - unsigned int resp; - int ret; - - - if (isst_get_config_tdp_lock_status(id)) { - isst_display_error_info_message(1, "TDP is locked", 0, 0); - return -1; - - } - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, CONFIG_TDP_SET_LEVEL, 0, - tdp_level, &resp); - if (ret) { - isst_display_error_info_message(1, "Set TDP level failed for level", 1, tdp_level); - return ret; - } - - return 0; + CHECK_CB(set_tdp_level); + return isst_ops->set_tdp_level(id, tdp_level); } int isst_get_pbf_info(struct isst_id *id, int level, struct isst_pbf_info *pbf_info) { struct isst_pkg_ctdp_level_info ctdp_level; struct isst_pkg_ctdp pkg_dev; - int i, ret, max_punit_core, max_mask_index; - unsigned int req, resp; + int ret; ret = isst_get_ctdp_levels(id, &pkg_dev); if (ret) { @@ -435,194 +216,23 @@ int isst_get_pbf_info(struct isst_id *id, int level, struct isst_pbf_info *pbf_i pbf_info->core_cpumask_size = alloc_cpu_set(&pbf_info->core_cpumask); - max_punit_core = get_max_punit_core_id(id); - max_mask_index = max_punit_core > 32 ? 2 : 1; - - for (i = 0; i < max_mask_index; ++i) { - unsigned long long mask; - int count; - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_PBF_GET_CORE_MASK_INFO, - 0, (i << 8) | level, &resp); - if (ret) - break; - - debug_printf( - "cpu:%d CONFIG_TDP_PBF_GET_CORE_MASK_INFO resp:%x\n", - id->cpu, resp); - - mask = (unsigned long long)resp << (32 * i); - set_cpu_mask_from_punit_coremask(id, mask, - pbf_info->core_cpumask_size, - pbf_info->core_cpumask, - &count); - } - - req = level; - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO, 0, req, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO resp:%x\n", id->cpu, - resp); - - pbf_info->p1_low = resp & 0xff; - pbf_info->p1_high = (resp & GENMASK(15, 8)) >> 8; - - req = level; - ret = isst_send_mbox_command( - id->cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TDP_INFO, 0, req, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TDP_INFO resp:%x\n", id->cpu, resp); - - pbf_info->tdp = resp & 0xffff; - - req = level; - ret = isst_send_mbox_command( - id->cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TJ_MAX_INFO, 0, req, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TJ_MAX_INFO resp:%x\n", id->cpu, - resp); - pbf_info->t_control = (resp >> 8) & 0xff; - pbf_info->t_prochot = resp & 0xff; - - return 0; -} - -void isst_get_pbf_info_complete(struct isst_pbf_info *pbf_info) -{ - free_cpu_set(pbf_info->core_cpumask); + CHECK_CB(get_pbf_info); + return isst_ops->get_pbf_info(id, level, pbf_info); } int isst_set_pbf_fact_status(struct isst_id *id, int pbf, int enable) { - struct isst_pkg_ctdp pkg_dev; - struct isst_pkg_ctdp_level_info ctdp_level; - int current_level; - unsigned int req = 0, resp; - int ret; - - ret = isst_get_ctdp_levels(id, &pkg_dev); - if (ret) - debug_printf("cpu:%d No support for dynamic ISST\n", id->cpu); - - current_level = pkg_dev.current_level; - - ret = isst_get_ctdp_control(id, current_level, &ctdp_level); - if (ret) - return ret; - - if (pbf) { - if (ctdp_level.fact_enabled) - req = BIT(16); - - if (enable) - req |= BIT(17); - else - req &= ~BIT(17); - } else { - - if (enable && !ctdp_level.sst_cp_enabled) - isst_display_error_info_message(0, "Make sure to execute before: core-power enable", 0, 0); - - if (ctdp_level.pbf_enabled) - req = BIT(17); - - if (enable) - req |= BIT(16); - else - req &= ~BIT(16); - } - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_SET_TDP_CONTROL, 0, req, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_SET_TDP_CONTROL pbf/fact:%d req:%x\n", - id->cpu, pbf, req); - - return 0; + CHECK_CB(set_pbf_fact_status); + return isst_ops->set_pbf_fact_status(id, pbf, enable); } -int isst_get_fact_bucket_info(struct isst_id *id, int level, - struct isst_fact_bucket_info *bucket_info) -{ - unsigned int resp; - int i, k, ret; - - for (i = 0; i < 2; ++i) { - int j; - - ret = isst_send_mbox_command( - id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES, 0, - (i << 8) | level, &resp); - if (ret) - return ret; - - debug_printf( - "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES index:%d level:%d resp:%x\n", - id->cpu, i, level, resp); - - for (j = 0; j < 4; ++j) { - bucket_info[j + (i * 4)].high_priority_cores_count = - (resp >> (j * 8)) & 0xff; - } - } - - for (k = 0; k < 3; ++k) { - for (i = 0; i < 2; ++i) { - int j; - - ret = isst_send_mbox_command( - id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS, 0, - (k << 16) | (i << 8) | level, &resp); - if (ret) - return ret; - - debug_printf( - "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS index:%d level:%d avx:%d resp:%x\n", - id->cpu, i, level, k, resp); - - for (j = 0; j < 4; ++j) { - switch (k) { - case 0: - bucket_info[j + (i * 4)].sse_trl = - (resp >> (j * 8)) & 0xff; - break; - case 1: - bucket_info[j + (i * 4)].avx_trl = - (resp >> (j * 8)) & 0xff; - break; - case 2: - bucket_info[j + (i * 4)].avx512_trl = - (resp >> (j * 8)) & 0xff; - break; - default: - break; - } - } - } - } - return 0; -} int isst_get_fact_info(struct isst_id *id, int level, int fact_bucket, struct isst_fact_info *fact_info) { struct isst_pkg_ctdp_level_info ctdp_level; struct isst_pkg_ctdp pkg_dev; - unsigned int resp; - int j, ret, print; + int ret; ret = isst_get_ctdp_levels(id, &pkg_dev); if (ret) { @@ -643,40 +253,8 @@ int isst_get_fact_info(struct isst_id *id, int level, int fact_bucket, struct is isst_display_error_info_message(1, "turbo-freq feature is not present at this level", 1, level); return -1; } - - ret = isst_send_mbox_command(id->cpu, CONFIG_TDP, - CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO, 0, - level, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO resp:%x\n", - id->cpu, resp); - - fact_info->lp_clipping_ratio_license_sse = resp & 0xff; - fact_info->lp_clipping_ratio_license_avx2 = (resp >> 8) & 0xff; - fact_info->lp_clipping_ratio_license_avx512 = (resp >> 16) & 0xff; - - ret = isst_get_fact_bucket_info(id, level, fact_info->bucket_info); - if (ret) - return ret; - - print = 0; - for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { - if (fact_bucket != 0xff && fact_bucket != j) - continue; - - if (!fact_info->bucket_info[j].high_priority_cores_count) - break; - - print = 1; - } - if (!print) { - isst_display_error_info_message(1, "Invalid bucket", 0, 0); - return -1; - } - - return 0; + CHECK_CB(get_fact_info); + return isst_ops->get_fact_info(id, level, fact_bucket, fact_info); } int isst_get_trl(struct isst_id *id, unsigned long long *trl) @@ -709,6 +287,9 @@ int isst_set_trl_from_current_tdp(struct isst_id *id, unsigned long long trl) unsigned long long msr_trl; int ret; + if (id->cpu < 0) + return 0; + if (trl) { msr_trl = trl; } else { @@ -770,6 +351,13 @@ void isst_get_process_ctdp_complete(struct isst_id *id, struct isst_pkg_ctdp *pk } } +void isst_adjust_uncore_freq(struct isst_id *id, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + CHECK_CB(adjust_uncore_freq); + return isst_ops->adjust_uncore_freq(id, config_index, ctdp_level); +} + int isst_get_process_ctdp(struct isst_id *id, int tdp_level, struct isst_pkg_ctdp *pkg_dev) { int i, ret, valid = 0; @@ -838,8 +426,8 @@ int isst_get_process_ctdp(struct isst_id *id, int tdp_level, struct isst_pkg_ctd ctdp_level->tdp_ratio = ctdp_level->sse_p1; } - isst_get_get_trl_from_msr(id, ctdp_level->trl_sse_active_cores); - isst_get_trl_bucket_info(id, &ctdp_level->buckets_info); + isst_get_get_trl_from_msr(id, ctdp_level->trl_ratios[0]); + isst_get_trl_bucket_info(id, i, &ctdp_level->trl_cores); continue; } @@ -851,38 +439,19 @@ int isst_get_process_ctdp(struct isst_id *id, int tdp_level, struct isst_pkg_ctd if (ret) return ret; - ret = isst_get_tjmax_info(id, i, ctdp_level); - if (ret) - return ret; - ctdp_level->core_cpumask_size = alloc_cpu_set(&ctdp_level->core_cpumask); ret = isst_get_coremask_info(id, i, ctdp_level); if (ret) return ret; - ret = isst_get_trl_bucket_info(id, &ctdp_level->buckets_info); - if (ret) - return ret; - - ret = isst_get_get_trl(id, i, 0, - ctdp_level->trl_sse_active_cores); + ret = isst_get_trl_bucket_info(id, i, &ctdp_level->trl_cores); if (ret) return ret; - ret = isst_get_get_trl(id, i, 1, - ctdp_level->trl_avx_active_cores); + ret = isst_get_get_trls(id, i, ctdp_level); if (ret) return ret; - - ret = isst_get_get_trl(id, i, 2, - ctdp_level->trl_avx_512_active_cores); - if (ret) - return ret; - - isst_get_uncore_p0_p1_info(id, i, ctdp_level); - isst_get_p1_info(id, i, ctdp_level); - isst_get_uncore_mem_freq(id, i, ctdp_level); } if (!valid) @@ -893,178 +462,37 @@ int isst_get_process_ctdp(struct isst_id *id, int tdp_level, struct isst_pkg_ctd int isst_clos_get_clos_information(struct isst_id *id, int *enable, int *type) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", id->cpu, resp); - - if (resp & BIT(1)) - *enable = 1; - else - *enable = 0; - - if (resp & BIT(2)) - *type = 1; - else - *type = 0; - - return 0; + CHECK_CB(get_clos_information); + return isst_ops->get_clos_information(id, enable, type); } int isst_pm_qos_config(struct isst_id *id, int enable_clos, int priority_type) { - unsigned int req, resp; - int ret; - - if (!enable_clos) { - struct isst_pkg_ctdp pkg_dev; - struct isst_pkg_ctdp_level_info ctdp_level; - - ret = isst_get_ctdp_levels(id, &pkg_dev); - if (ret) { - debug_printf("isst_get_ctdp_levels\n"); - return ret; - } - - ret = isst_get_ctdp_control(id, pkg_dev.current_level, - &ctdp_level); - if (ret) - return ret; - - if (ctdp_level.fact_enabled) { - isst_display_error_info_message(1, "Ignoring request, turbo-freq feature is still enabled", 0, 0); - return -EINVAL; - } - ret = isst_write_pm_config(id, 0); - if (ret) - isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); - } else { - ret = isst_write_pm_config(id, 1); - if (ret) - isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); - } - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, - &resp); - if (ret) { - isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0); - return ret; - } - - debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", id->cpu, resp); - - req = resp; - - if (enable_clos) - req = req | BIT(1); - else - req = req & ~BIT(1); - - if (priority_type > 1) - isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0); - - if (priority_type) - req = req | BIT(2); - else - req = req & ~BIT(2); - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, - BIT(MBOX_CMD_WRITE_BIT), req, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CLOS_PM_QOS_CONFIG priority type:%d req:%x\n", id->cpu, - priority_type, req); - - return 0; + CHECK_CB(pm_qos_config); + return isst_ops->pm_qos_config(id, enable_clos, priority_type); } int isst_pm_get_clos(struct isst_id *id, int clos, struct isst_clos_config *clos_config) { - unsigned int resp; - int ret; - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_CLOS, clos, 0, - &resp); - if (ret) - return ret; - - clos_config->epp = resp & 0x0f; - clos_config->clos_prop_prio = (resp >> 4) & 0x0f; - clos_config->clos_min = (resp >> 8) & 0xff; - clos_config->clos_max = (resp >> 16) & 0xff; - clos_config->clos_desired = (resp >> 24) & 0xff; - - return 0; + CHECK_CB(pm_get_clos); + return isst_ops->pm_get_clos(id, clos, clos_config); } int isst_set_clos(struct isst_id *id, int clos, struct isst_clos_config *clos_config) { - unsigned int req, resp; - unsigned int param; - int ret; - - req = clos_config->epp & 0x0f; - req |= (clos_config->clos_prop_prio & 0x0f) << 4; - req |= (clos_config->clos_min & 0xff) << 8; - req |= (clos_config->clos_max & 0xff) << 16; - req |= (clos_config->clos_desired & 0xff) << 24; - - param = BIT(MBOX_CMD_WRITE_BIT) | clos; - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PM_CLOS, param, req, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CLOS_PM_CLOS param:%x req:%x\n", id->cpu, param, req); - - return 0; + CHECK_CB(set_clos); + return isst_ops->set_clos(id, clos, clos_config); } int isst_clos_get_assoc_status(struct isst_id *id, int *clos_id) { - unsigned int resp; - unsigned int param; - int core_id, ret; - - core_id = find_phy_core_num(id->cpu); - param = core_id; - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, 0, - &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x resp:%x\n", id->cpu, param, - resp); - *clos_id = (resp >> 16) & 0x03; - - return 0; + CHECK_CB(clos_get_assoc_status); + return isst_ops->clos_get_assoc_status(id, clos_id); } int isst_clos_associate(struct isst_id *id, int clos_id) { - unsigned int req, resp; - unsigned int param; - int core_id, ret; + CHECK_CB(clos_associate); + return isst_ops->clos_associate(id, clos_id); - req = (clos_id & 0x03) << 16; - core_id = find_phy_core_num(id->cpu); - param = BIT(MBOX_CMD_WRITE_BIT) | core_id; - - ret = isst_send_mbox_command(id->cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, - req, &resp); - if (ret) - return ret; - - debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x req:%x\n", id->cpu, param, - req); - - return 0; } diff --git a/tools/power/x86/intel-speed-select/isst-daemon.c b/tools/power/x86/intel-speed-select/isst-daemon.c index c2290ef0e3af..12053fa43542 100644 --- a/tools/power/x86/intel-speed-select/isst-daemon.c +++ b/tools/power/x86/intel-speed-select/isst-daemon.c @@ -20,16 +20,17 @@ #include "isst.h" -static int per_package_levels_info[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; -static time_t per_package_levels_tm[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; +static int per_package_levels_info[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]; +static time_t per_package_levels_tm[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]; static void init_levels(void) { - int i, j; + int i, j, k; for (i = 0; i < MAX_PACKAGE_COUNT; ++i) for (j = 0; j < MAX_DIE_PER_PACKAGE; ++j) - per_package_levels_info[i][j] = -1; + for (k = 0; k < MAX_PUNIT_PER_DIE; ++k) + per_package_levels_info[i][j][k] = -1; } void process_level_change(struct isst_id *id) @@ -39,16 +40,16 @@ void process_level_change(struct isst_id *id) time_t tm; int ret; - if (id->pkg < 0 || id->die < 0) { + if (id->pkg < 0 || id->die < 0 || id->punit < 0) { debug_printf("Invalid package/die info for cpu:%d\n", id->cpu); return; } tm = time(NULL); - if (tm - per_package_levels_tm[id->pkg][id->die] < 2) + if (tm - per_package_levels_tm[id->pkg][id->die][id->punit] < 2) return; - per_package_levels_tm[id->pkg][id->die] = tm; + per_package_levels_tm[id->pkg][id->die][id->punit] = tm; ret = isst_get_ctdp_levels(id, &pkg_dev); if (ret) { @@ -64,14 +65,14 @@ void process_level_change(struct isst_id *id) return; } - if (per_package_levels_info[id->pkg][id->die] == pkg_dev.current_level) + if (per_package_levels_info[id->pkg][id->die][id->punit] == pkg_dev.current_level) return; debug_printf("**Config level change for cpu:%d pkg:%d die:%d from %d to %d\n", - id->cpu, id->pkg, id->die, per_package_levels_info[id->pkg][id->die], + id->cpu, id->pkg, id->die, per_package_levels_info[id->pkg][id->die][id->punit], pkg_dev.current_level); - per_package_levels_info[id->pkg][id->die] = pkg_dev.current_level; + per_package_levels_info[id->pkg][id->die][id->punit] = pkg_dev.current_level; ctdp_level.core_cpumask_size = alloc_cpu_set(&ctdp_level.core_cpumask); @@ -82,6 +83,19 @@ void process_level_change(struct isst_id *id) return; } + if (use_cgroupv2()) { + int ret; + + ret = enable_cpuset_controller(); + if (ret) + goto use_offline; + + isolate_cpus(id, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask, pkg_dev.current_level); + + goto free_mask; + } + +use_offline: if (ctdp_level.cpu_count) { int i, max_cpus = get_topo_max_cpus(); for (i = 0; i < max_cpus; ++i) { @@ -96,7 +110,7 @@ void process_level_change(struct isst_id *id) } } } - +free_mask: free_cpu_set(ctdp_level.core_cpumask); } @@ -108,7 +122,7 @@ static void _poll_for_config_change(struct isst_id *id, void *arg1, void *arg2, static void poll_for_config_change(void) { - for_each_online_package_in_set(_poll_for_config_change, NULL, NULL, + for_each_online_power_domain_in_set(_poll_for_config_change, NULL, NULL, NULL, NULL); } diff --git a/tools/power/x86/intel-speed-select/isst-display.c b/tools/power/x86/intel-speed-select/isst-display.c index 7feadac04a6f..0403d42ab1ba 100644 --- a/tools/power/x86/intel-speed-select/isst-display.c +++ b/tools/power/x86/intel-speed-select/isst-display.c @@ -169,21 +169,30 @@ static void format_and_print(FILE *outf, int level, char *header, char *value) static int print_package_info(struct isst_id *id, FILE *outf) { char header[256]; + int level = 1; if (out_format_is_json()) { - snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d", - id->pkg, id->die, id->cpu); - format_and_print(outf, 1, header, NULL); + if (api_version() > 1) + snprintf(header, sizeof(header), "package-%d:die-%d:powerdomain-%d:cpu-%d", + id->pkg, id->die, id->punit, id->cpu); + else + snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d", + id->pkg, id->die, id->cpu); + format_and_print(outf, level, header, NULL); return 1; } snprintf(header, sizeof(header), "package-%d", id->pkg); - format_and_print(outf, 1, header, NULL); + format_and_print(outf, level++, header, NULL); snprintf(header, sizeof(header), "die-%d", id->die); - format_and_print(outf, 2, header, NULL); + format_and_print(outf, level++, header, NULL); + if (api_version() > 1) { + snprintf(header, sizeof(header), "powerdomain-%d", id->punit); + format_and_print(outf, level++, header, NULL); + } snprintf(header, sizeof(header), "cpu-%d", id->cpu); - format_and_print(outf, 3, header, NULL); + format_and_print(outf, level, header, NULL); - return 3; + return level; } static void _isst_pbf_display_information(struct isst_id *id, FILE *outf, int level, @@ -198,7 +207,7 @@ static void _isst_pbf_display_information(struct isst_id *id, FILE *outf, int le snprintf(header, sizeof(header), "high-priority-base-frequency(MHz)"); snprintf(value, sizeof(value), "%d", - pbf_info->p1_high * DISP_FREQ_MULTIPLIER); + pbf_info->p1_high * isst_get_disp_freq_multiplier()); format_and_print(outf, disp_level + 1, header, value); snprintf(header, sizeof(header), "high-priority-cpu-mask"); @@ -214,7 +223,7 @@ static void _isst_pbf_display_information(struct isst_id *id, FILE *outf, int le snprintf(header, sizeof(header), "low-priority-base-frequency(MHz)"); snprintf(value, sizeof(value), "%d", - pbf_info->p1_low * DISP_FREQ_MULTIPLIER); + pbf_info->p1_low * isst_get_disp_freq_multiplier()); format_and_print(outf, disp_level + 1, header, value); if (is_clx_n_platform()) @@ -235,6 +244,7 @@ static void _isst_fact_display_information(struct isst_id *id, FILE *outf, int l int base_level) { struct isst_fact_bucket_info *bucket_info = fact_info->bucket_info; + int trl_max_levels = isst_get_trl_max_levels(); char header[256]; char value[256]; int print = 0, j; @@ -243,7 +253,8 @@ static void _isst_fact_display_information(struct isst_id *id, FILE *outf, int l if (fact_bucket != 0xff && fact_bucket != j) continue; - if (!bucket_info[j].high_priority_cores_count) + /* core count must be valid for CPU power domain */ + if (!bucket_info[j].hp_cores && id->cpu >= 0) break; print = 1; @@ -256,10 +267,12 @@ static void _isst_fact_display_information(struct isst_id *id, FILE *outf, int l snprintf(header, sizeof(header), "speed-select-turbo-freq-properties"); format_and_print(outf, base_level, header, NULL); for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { + int i; + if (fact_bucket != 0xff && fact_bucket != j) continue; - if (!bucket_info[j].high_priority_cores_count) + if (!bucket_info[j].hp_cores) break; snprintf(header, sizeof(header), "bucket-%d", j); @@ -267,75 +280,49 @@ static void _isst_fact_display_information(struct isst_id *id, FILE *outf, int l snprintf(header, sizeof(header), "high-priority-cores-count"); snprintf(value, sizeof(value), "%d", - bucket_info[j].high_priority_cores_count); + bucket_info[j].hp_cores); format_and_print(outf, base_level + 2, header, value); - - if (fact_avx & 0x01) { - snprintf(header, sizeof(header), - "high-priority-max-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - bucket_info[j].sse_trl * DISP_FREQ_MULTIPLIER); - format_and_print(outf, base_level + 2, header, value); - } - - if (fact_avx & 0x02) { - snprintf(header, sizeof(header), - "high-priority-max-avx2-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - bucket_info[j].avx_trl * DISP_FREQ_MULTIPLIER); - format_and_print(outf, base_level + 2, header, value); - } - - if (fact_avx & 0x04) { - snprintf(header, sizeof(header), - "high-priority-max-avx512-frequency(MHz)"); + for (i = 0; i < trl_max_levels; i++) { + if (!bucket_info[j].hp_ratios[i] || (fact_avx != 0xFF && !(fact_avx & (1 << i)))) + continue; + if (i == 0 && api_version() == 1 && !is_emr_platform()) + snprintf(header, sizeof(header), + "high-priority-max-frequency(MHz)"); + else + snprintf(header, sizeof(header), + "high-priority-max-%s-frequency(MHz)", isst_get_trl_level_name(i)); snprintf(value, sizeof(value), "%d", - bucket_info[j].avx512_trl * - DISP_FREQ_MULTIPLIER); + bucket_info[j].hp_ratios[i] * isst_get_disp_freq_multiplier()); format_and_print(outf, base_level + 2, header, value); } } snprintf(header, sizeof(header), "speed-select-turbo-freq-clip-frequencies"); format_and_print(outf, base_level + 1, header, NULL); - snprintf(header, sizeof(header), "low-priority-max-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - fact_info->lp_clipping_ratio_license_sse * - DISP_FREQ_MULTIPLIER); - format_and_print(outf, base_level + 2, header, value); - snprintf(header, sizeof(header), - "low-priority-max-avx2-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - fact_info->lp_clipping_ratio_license_avx2 * - DISP_FREQ_MULTIPLIER); - format_and_print(outf, base_level + 2, header, value); - snprintf(header, sizeof(header), - "low-priority-max-avx512-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - fact_info->lp_clipping_ratio_license_avx512 * - DISP_FREQ_MULTIPLIER); - format_and_print(outf, base_level + 2, header, value); + + for (j = 0; j < trl_max_levels; j++) { + if (!fact_info->lp_ratios[j]) + continue; + + /* No AVX level name for SSE to be consistent with previous formatting */ + if (j == 0 && api_version() == 1 && !is_emr_platform()) + snprintf(header, sizeof(header), "low-priority-max-frequency(MHz)"); + else + snprintf(header, sizeof(header), "low-priority-max-%s-frequency(MHz)", + isst_get_trl_level_name(j)); + snprintf(value, sizeof(value), "%d", + fact_info->lp_ratios[j] * isst_get_disp_freq_multiplier()); + format_and_print(outf, base_level + 2, header, value); + } } void isst_ctdp_display_core_info(struct isst_id *id, FILE *outf, char *prefix, unsigned int val, char *str0, char *str1) { - char header[256]; char value[256]; - int level = 1; + int level = print_package_info(id, outf); - if (out_format_is_json()) { - snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d", - id->pkg, id->die, id->cpu); - format_and_print(outf, level++, header, NULL); - } else { - snprintf(header, sizeof(header), "package-%d", id->pkg); - format_and_print(outf, level++, header, NULL); - snprintf(header, sizeof(header), "die-%d", id->die); - format_and_print(outf, level++, header, NULL); - snprintf(header, sizeof(header), "cpu-%d", id->cpu); - format_and_print(outf, level++, header, NULL); - } + level++; if (str0 && !val) snprintf(value, sizeof(value), "%s", str0); @@ -354,6 +341,7 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level char header[256]; char value[512]; static int level; + int trl_max_levels = isst_get_trl_max_levels(); int i; if (pkg_dev->processed) @@ -361,7 +349,7 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level for (i = 0; i <= pkg_dev->levels; ++i) { struct isst_pkg_ctdp_level_info *ctdp_level; - int j; + int j, k; ctdp_level = &pkg_dev->ctdp_level[i]; if (!ctdp_level->processed) @@ -371,31 +359,33 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level ctdp_level->level); format_and_print(outf, level + 1, header, NULL); - snprintf(header, sizeof(header), "cpu-count"); - j = get_cpu_count(id); - snprintf(value, sizeof(value), "%d", j); - format_and_print(outf, level + 2, header, value); - - j = CPU_COUNT_S(ctdp_level->core_cpumask_size, - ctdp_level->core_cpumask); - if (j) { - snprintf(header, sizeof(header), "enable-cpu-count"); + if (id->cpu >= 0) { + snprintf(header, sizeof(header), "cpu-count"); + j = get_cpu_count(id); snprintf(value, sizeof(value), "%d", j); format_and_print(outf, level + 2, header, value); - } - if (ctdp_level->core_cpumask_size) { - snprintf(header, sizeof(header), "enable-cpu-mask"); - printcpumask(sizeof(value), value, - ctdp_level->core_cpumask_size, - ctdp_level->core_cpumask); - format_and_print(outf, level + 2, header, value); + j = CPU_COUNT_S(ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + if (j) { + snprintf(header, sizeof(header), "enable-cpu-count"); + snprintf(value, sizeof(value), "%d", j); + format_and_print(outf, level + 2, header, value); + } - snprintf(header, sizeof(header), "enable-cpu-list"); - printcpulist(sizeof(value), value, - ctdp_level->core_cpumask_size, - ctdp_level->core_cpumask); - format_and_print(outf, level + 2, header, value); + if (ctdp_level->core_cpumask_size) { + snprintf(header, sizeof(header), "enable-cpu-mask"); + printcpumask(sizeof(value), value, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "enable-cpu-list"); + printcpulist(sizeof(value), value, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + format_and_print(outf, level + 2, header, value); + } } snprintf(header, sizeof(header), "thermal-design-power-ratio"); @@ -406,41 +396,48 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level if (!ctdp_level->sse_p1) ctdp_level->sse_p1 = ctdp_level->tdp_ratio; snprintf(value, sizeof(value), "%d", - ctdp_level->sse_p1 * DISP_FREQ_MULTIPLIER); + ctdp_level->sse_p1 * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); if (ctdp_level->avx2_p1) { snprintf(header, sizeof(header), "base-frequency-avx2(MHz)"); snprintf(value, sizeof(value), "%d", - ctdp_level->avx2_p1 * DISP_FREQ_MULTIPLIER); + ctdp_level->avx2_p1 * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); } if (ctdp_level->avx512_p1) { snprintf(header, sizeof(header), "base-frequency-avx512(MHz)"); snprintf(value, sizeof(value), "%d", - ctdp_level->avx512_p1 * DISP_FREQ_MULTIPLIER); + ctdp_level->avx512_p1 * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); } if (ctdp_level->uncore_pm) { snprintf(header, sizeof(header), "uncore-frequency-min(MHz)"); snprintf(value, sizeof(value), "%d", - ctdp_level->uncore_pm * DISP_FREQ_MULTIPLIER); + ctdp_level->uncore_pm * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); } if (ctdp_level->uncore_p0) { snprintf(header, sizeof(header), "uncore-frequency-max(MHz)"); snprintf(value, sizeof(value), "%d", - ctdp_level->uncore_p0 * DISP_FREQ_MULTIPLIER); + ctdp_level->uncore_p0 * isst_get_disp_freq_multiplier()); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->amx_p1) { + snprintf(header, sizeof(header), "base-frequency-amx(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->amx_p1 * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); } if (ctdp_level->uncore_p1) { snprintf(header, sizeof(header), "uncore-frequency-base(MHz)"); snprintf(value, sizeof(value), "%d", - ctdp_level->uncore_p1 * DISP_FREQ_MULTIPLIER); + ctdp_level->uncore_p1 * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); } @@ -451,6 +448,13 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level format_and_print(outf, level + 2, header, value); } + if (api_version() > 1) { + snprintf(header, sizeof(header), "cooling_type"); + snprintf(value, sizeof(value), "%d", + ctdp_level->cooling_type); + format_and_print(outf, level + 2, header, value); + } + snprintf(header, sizeof(header), "speed-select-turbo-freq"); if (ctdp_level->fact_support) { @@ -505,54 +509,24 @@ void isst_ctdp_display_information(struct isst_id *id, FILE *outf, int tdp_level format_and_print(outf, level + 2, header, value); } - snprintf(header, sizeof(header), "turbo-ratio-limits-sse"); - format_and_print(outf, level + 2, header, NULL); - for (j = 0; j < 8; ++j) { - snprintf(header, sizeof(header), "bucket-%d", j); - format_and_print(outf, level + 3, header, NULL); + for (k = 0; k < trl_max_levels; k++) { + if (!ctdp_level->trl_ratios[k][0]) + continue; - snprintf(header, sizeof(header), "core-count"); - snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); - format_and_print(outf, level + 4, header, value); - - snprintf(header, sizeof(header), - "max-turbo-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", - ctdp_level->trl_sse_active_cores[j] * - DISP_FREQ_MULTIPLIER); - format_and_print(outf, level + 4, header, value); - } - - if (ctdp_level->trl_avx_active_cores[0]) { - snprintf(header, sizeof(header), "turbo-ratio-limits-avx2"); + snprintf(header, sizeof(header), "turbo-ratio-limits-%s", isst_get_trl_level_name(k)); format_and_print(outf, level + 2, header, NULL); - for (j = 0; j < 8; ++j) { - snprintf(header, sizeof(header), "bucket-%d", j); - format_and_print(outf, level + 3, header, NULL); - snprintf(header, sizeof(header), "core-count"); - snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); - format_and_print(outf, level + 4, header, value); - - snprintf(header, sizeof(header), "max-turbo-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_active_cores[j] * DISP_FREQ_MULTIPLIER); - format_and_print(outf, level + 4, header, value); - } - } - - if (ctdp_level->trl_avx_512_active_cores[0]) { - snprintf(header, sizeof(header), "turbo-ratio-limits-avx512"); - format_and_print(outf, level + 2, header, NULL); for (j = 0; j < 8; ++j) { snprintf(header, sizeof(header), "bucket-%d", j); format_and_print(outf, level + 3, header, NULL); snprintf(header, sizeof(header), "core-count"); - snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); + + snprintf(value, sizeof(value), "%llu", (ctdp_level->trl_cores >> (j * 8)) & 0xff); format_and_print(outf, level + 4, header, value); snprintf(header, sizeof(header), "max-turbo-frequency(MHz)"); - snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_512_active_cores[j] * DISP_FREQ_MULTIPLIER); + snprintf(value, sizeof(value), "%d", ctdp_level->trl_ratios[k][j] * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 4, header, value); } } @@ -631,18 +605,18 @@ void isst_clos_display_information(struct isst_id *id, FILE *outf, int clos, format_and_print(outf, level + 2, header, value); snprintf(header, sizeof(header), "clos-min"); - snprintf(value, sizeof(value), "%d MHz", clos_config->clos_min * DISP_FREQ_MULTIPLIER); + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_min * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); snprintf(header, sizeof(header), "clos-max"); - if (clos_config->clos_max == 0xff) + if ((clos_config->clos_max * isst_get_disp_freq_multiplier()) == 25500) snprintf(value, sizeof(value), "Max Turbo frequency"); else - snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER); + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); snprintf(header, sizeof(header), "clos-desired"); - snprintf(value, sizeof(value), "%d MHz", clos_config->clos_desired * DISP_FREQ_MULTIPLIER); + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_desired * isst_get_disp_freq_multiplier()); format_and_print(outf, level + 2, header, value); format_and_print(outf, level, NULL, NULL); @@ -717,8 +691,7 @@ void isst_display_result(struct isst_id *id, FILE *outf, char *feature, char *cm char value[256]; int level = 3; - if (id->cpu >= 0) - level = print_package_info(id, outf); + level = print_package_info(id, outf); snprintf(header, sizeof(header), "%s", feature); format_and_print(outf, level + 1, header, NULL); diff --git a/tools/power/x86/intel-speed-select/isst.h b/tools/power/x86/intel-speed-select/isst.h index 824876e31e23..54fc21575d56 100644 --- a/tools/power/x86/intel-speed-select/isst.h +++ b/tools/power/x86/intel-speed-select/isst.h @@ -28,6 +28,8 @@ #include <stdarg.h> #include <sys/ioctl.h> +#include <linux/isst_if.h> + #define BIT(x) (1 << (x)) #define BIT_ULL(nr) (1ULL << (nr)) #define GENMASK(h, l) (((~0UL) << (l)) & (~0UL >> (sizeof(long) * 8 - 1 - (h)))) @@ -77,29 +79,29 @@ #define DISP_FREQ_MULTIPLIER 100 -#define MAX_PACKAGE_COUNT 8 -#define MAX_DIE_PER_PACKAGE 2 +#define MAX_PACKAGE_COUNT 8 +#define MAX_DIE_PER_PACKAGE 2 +#define MAX_PUNIT_PER_DIE 8 /* Unified structure to specific a CPU or a Power Domain */ struct isst_id { int cpu; int pkg; int die; + int punit; }; struct isst_clos_config { + unsigned int clos_min; + unsigned int clos_max; unsigned char epp; unsigned char clos_prop_prio; - unsigned char clos_min; - unsigned char clos_max; unsigned char clos_desired; }; struct isst_fact_bucket_info { - int high_priority_cores_count; - int sse_trl; - int avx_trl; - int avx512_trl; + int hp_cores; + int hp_ratios[TRL_MAX_LEVELS]; }; struct isst_pbf_info { @@ -117,9 +119,7 @@ struct isst_pbf_info { #define ISST_TRL_MAX_ACTIVE_CORES 8 #define ISST_FACT_MAX_BUCKETS 8 struct isst_fact_info { - int lp_clipping_ratio_license_sse; - int lp_clipping_ratio_license_avx2; - int lp_clipping_ratio_license_avx512; + int lp_ratios[TRL_MAX_LEVELS]; struct isst_fact_bucket_info bucket_info[ISST_FACT_MAX_BUCKETS]; }; @@ -143,20 +143,20 @@ struct isst_pkg_ctdp_level_info { int pkg_max_power; int fact; int t_proc_hot; + int cooling_type; int uncore_p0; int uncore_p1; int uncore_pm; int sse_p1; int avx2_p1; int avx512_p1; + int amx_p1; int mem_freq; size_t core_cpumask_size; cpu_set_t *core_cpumask; int cpu_count; - unsigned long long buckets_info; - int trl_sse_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; - int trl_avx_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; - int trl_avx_512_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; + unsigned long long trl_cores; /* Buckets info */ + int trl_ratios[TRL_MAX_LEVELS][ISST_TRL_MAX_ACTIVE_CORES]; int kobj_bucket_index; int active_bucket; int fact_max_index; @@ -178,13 +178,48 @@ struct isst_pkg_ctdp { struct isst_pkg_ctdp_level_info ctdp_level[ISST_MAX_TDP_LEVELS]; }; +enum isst_platform_param { + ISST_PARAM_MBOX_DELAY, + ISST_PARAM_MBOX_RETRIES, +}; + +struct isst_platform_ops { + int (*get_disp_freq_multiplier)(void); + int (*get_trl_max_levels)(void); + char *(*get_trl_level_name)(int level); + void (*update_platform_param)(enum isst_platform_param param, int value); + int (*is_punit_valid)(struct isst_id *id); + int (*read_pm_config)(struct isst_id *id, int *cp_state, int *cp_cap); + int (*get_config_levels)(struct isst_id *id, struct isst_pkg_ctdp *pkg_ctdp); + int (*get_ctdp_control)(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_tdp_info)(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_pwr_info)(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_coremask_info)(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_get_trl)(struct isst_id *id, int level, int avx_level, int *trl); + int (*get_get_trls)(struct isst_id *id, int level, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_trl_bucket_info)(struct isst_id *id, int level, unsigned long long *buckets_info); + int (*set_tdp_level)(struct isst_id *id, int tdp_level); + int (*get_pbf_info)(struct isst_id *id, int level, struct isst_pbf_info *pbf_info); + int (*set_pbf_fact_status)(struct isst_id *id, int pbf, int enable); + int (*get_fact_info)(struct isst_id *id, int level, int fact_bucket, struct isst_fact_info *fact_info); + void (*adjust_uncore_freq)(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); + int (*get_clos_information)(struct isst_id *id, int *enable, int *type); + int (*pm_qos_config)(struct isst_id *id, int enable_clos, int priority_type); + int (*pm_get_clos)(struct isst_id *id, int clos, struct isst_clos_config *clos_config); + int (*set_clos)(struct isst_id *id, int clos, struct isst_clos_config *clos_config); + int (*clos_get_assoc_status)(struct isst_id *id, int *clos_id); + int (*clos_associate)(struct isst_id *id, int clos_id); +}; + extern int is_cpu_in_power_domain(int cpu, struct isst_id *id); extern int get_topo_max_cpus(void); extern int get_cpu_count(struct isst_id *id); extern int get_max_punit_core_id(struct isst_id *id); +extern int api_version(void); /* Common interfaces */ FILE *get_output_file(void); +extern int is_debug_enabled(void); extern void debug_printf(const char *format, ...); extern int out_format_is_json(void); extern void set_isst_id(struct isst_id *id, int cpu); @@ -196,21 +231,22 @@ extern void set_cpu_mask_from_punit_coremask(struct isst_id *id, size_t core_cpumask_size, cpu_set_t *core_cpumask, int *cpu_cnt); - -extern int isst_send_mbox_command(unsigned int cpu, unsigned char command, - unsigned char sub_command, - unsigned int write, - unsigned int req_data, unsigned int *resp); - extern int isst_send_msr_command(unsigned int cpu, unsigned int command, int write, unsigned long long *req_resp); +extern int isst_set_platform_ops(int api_version); +extern void isst_update_platform_param(enum isst_platform_param, int vale); +extern int isst_get_disp_freq_multiplier(void); +extern int isst_get_trl_max_levels(void); +extern char *isst_get_trl_level_name(int level); +extern int isst_is_punit_valid(struct isst_id *id); + extern int isst_get_ctdp_levels(struct isst_id *id, struct isst_pkg_ctdp *pkg_dev); extern int isst_get_ctdp_control(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); extern int isst_get_coremask_info(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); -extern void isst_get_uncore_p0_p1_info(struct isst_id *id, int config_index, +extern void isst_adjust_uncore_freq(struct isst_id *id, int config_index, struct isst_pkg_ctdp_level_info *ctdp_level); extern int isst_get_process_ctdp(struct isst_id *id, int tdp_level, struct isst_pkg_ctdp *pkg_dev); @@ -228,11 +264,8 @@ extern int isst_set_tdp_level(struct isst_id *id, int tdp_level); extern int isst_set_pbf_fact_status(struct isst_id *id, int pbf, int enable); extern int isst_get_pbf_info(struct isst_id *id, int level, struct isst_pbf_info *pbf_info); -extern void isst_get_pbf_info_complete(struct isst_pbf_info *pbf_info); extern int isst_get_fact_info(struct isst_id *id, int level, int fact_bucket, struct isst_fact_info *fact_info); -extern int isst_get_fact_bucket_info(struct isst_id *id, int level, - struct isst_fact_bucket_info *bucket_info); extern void isst_fact_display_information(struct isst_id *id, FILE *outf, int level, int fact_bucket, int fact_avx, struct isst_fact_info *fact_info); @@ -265,11 +298,12 @@ extern int isst_read_pm_config(struct isst_id *id, int *cp_state, int *cp_cap); extern void isst_display_error_info_message(int error, char *msg, int arg_valid, int arg); extern int is_skx_based_platform(void); extern int is_spr_platform(void); +extern int is_emr_platform(void); extern int is_icx_platform(void); extern void isst_trl_display_information(struct isst_id *id, FILE *outf, unsigned long long trl); extern void set_cpu_online_offline(int cpu, int state); -extern void for_each_online_package_in_set(void (*callback)(struct isst_id *, void *, void *, +extern void for_each_online_power_domain_in_set(void (*callback)(struct isst_id *, void *, void *, void *, void *), void *arg1, void *arg2, void *arg3, void *arg4); @@ -277,4 +311,14 @@ extern int isst_daemon(int debug_mode, int poll_interval, int no_daemon); extern void process_level_change(struct isst_id *id); extern int hfi_main(void); extern void hfi_exit(void); + +/* Interface specific callbacks */ +extern struct isst_platform_ops *mbox_get_platform_ops(void); +extern struct isst_platform_ops *tpmi_get_platform_ops(void); + +/* Cgroup related interface */ +extern int enable_cpuset_controller(void); +extern int isolate_cpus(struct isst_id *id, int mask_size, cpu_set_t *cpu_mask, int level); +extern int use_cgroupv2(void); + #endif |