summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile4
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/include/asm/asm.h7
-rw-r--r--arch/powerpc/include/asm/bug.h3
-rw-r--r--arch/powerpc/include/asm/linkage.h3
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S26
-rw-r--r--arch/powerpc/kernel/cpu_setup_e500.S8
-rw-r--r--arch/powerpc/kernel/entry_32.S9
-rw-r--r--arch/powerpc/kernel/entry_64.S2
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S4
-rw-r--r--arch/powerpc/kernel/head_40x.S5
-rw-r--r--arch/powerpc/kernel/head_64.S7
-rw-r--r--arch/powerpc/kernel/head_85xx.S5
-rw-r--r--arch/powerpc/kernel/head_8xx.S5
-rw-r--r--arch/powerpc/kernel/head_book3s_32.S29
-rw-r--r--arch/powerpc/kernel/misc_64.S4
-rw-r--r--arch/powerpc/kernel/swsusp_32.S5
-rw-r--r--arch/powerpc/kernel/vdso/Makefile2
-rw-r--r--arch/powerpc/kernel/vector.S4
-rw-r--r--arch/powerpc/kvm/book3s_hv_interrupts.S4
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S25
-rw-r--r--arch/powerpc/kvm/fpu.S17
-rw-r--r--arch/powerpc/platforms/52xx/lite5200_sleep.S15
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--drivers/crypto/vmx/Makefile2
-rw-r--r--kernel/trace/Kconfig7
-rw-r--r--scripts/Makefile.lib3
-rw-r--r--tools/objtool/arch/powerpc/Build2
-rw-r--r--tools/objtool/arch/powerpc/decode.c110
-rw-r--r--tools/objtool/arch/powerpc/include/arch/cfi_regs.h11
-rw-r--r--tools/objtool/arch/powerpc/include/arch/elf.h10
-rw-r--r--tools/objtool/arch/powerpc/include/arch/special.h21
-rw-r--r--tools/objtool/arch/powerpc/special.c19
-rw-r--r--tools/objtool/arch/x86/decode.c5
-rw-r--r--tools/objtool/arch/x86/include/arch/elf.h2
-rw-r--r--tools/objtool/arch/x86/include/arch/endianness.h9
-rw-r--r--tools/objtool/builtin-check.c14
-rw-r--r--tools/objtool/check.c53
-rw-r--r--tools/objtool/elf.c8
-rw-r--r--tools/objtool/include/objtool/arch.h4
-rw-r--r--tools/objtool/include/objtool/builtin.h1
-rw-r--r--tools/objtool/include/objtool/elf.h8
-rw-r--r--tools/objtool/include/objtool/endianness.h32
-rw-r--r--tools/objtool/orc_dump.c11
-rw-r--r--tools/objtool/orc_gen.c4
-rw-r--r--tools/objtool/special.c3
46 files changed, 429 insertions, 106 deletions
diff --git a/Makefile b/Makefile
index d148a55bfd0f..53c2b715d0bf 100644
--- a/Makefile
+++ b/Makefile
@@ -933,7 +933,9 @@ ifdef CONFIG_FTRACE_MCOUNT_USE_CC
endif
endif
ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
- CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+ ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT
+ CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+ endif
endif
ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
ifdef CONFIG_HAVE_C_RECORDMCOUNT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 65952f62ea4b..b8c4ac56bddc 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -241,6 +241,8 @@ config PPC
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
select HAVE_OPTPROBES
+ select HAVE_OBJTOOL if PPC32 || MPROFILE_KERNEL
+ select HAVE_OBJTOOL_MCOUNT if HAVE_OBJTOOL
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_PERF_REGS
diff --git a/arch/powerpc/include/asm/asm.h b/arch/powerpc/include/asm/asm.h
new file mode 100644
index 000000000000..86f46b604e9a
--- /dev/null
+++ b/arch/powerpc/include/asm/asm.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_ASM_H
+#define _ASM_POWERPC_ASM_H
+
+#define _ASM_PTR " .long "
+
+#endif /* _ASM_POWERPC_ASM_H */
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index 61a4736355c2..ef42adb44aa3 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -99,7 +99,8 @@
__label__ __label_warn_on; \
\
WARN_ENTRY("twi 31, 0, 0", BUGFLAG_WARNING | (flags), __label_warn_on); \
- unreachable(); \
+ barrier_before_unreachable(); \
+ __builtin_unreachable(); \
\
__label_warn_on: \
break; \
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
index b71b9582e754..b88d1d2cf304 100644
--- a/arch/powerpc/include/asm/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
@@ -4,6 +4,9 @@
#include <asm/types.h>
+#define __ALIGN .align 2
+#define __ALIGN_STR ".align 2"
+
#ifdef CONFIG_PPC64_ELF_ABI_V1
#define cond_syscall(x) \
asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n" \
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index f8b5ff64b604..f29ce3dd6140 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -4,6 +4,8 @@
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*/
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
@@ -81,7 +83,7 @@ _GLOBAL(__setup_cpu_745x)
blr
/* Enable caches for 603's, 604, 750 & 7400 */
-setup_common_caches:
+SYM_FUNC_START_LOCAL(setup_common_caches)
mfspr r11,SPRN_HID0
andi. r0,r11,HID0_DCE
ori r11,r11,HID0_ICE|HID0_DCE
@@ -95,11 +97,12 @@ setup_common_caches:
sync
isync
blr
+SYM_FUNC_END(setup_common_caches)
/* 604, 604e, 604ev, ...
* Enable superscalar execution & branch history table
*/
-setup_604_hid0:
+SYM_FUNC_START_LOCAL(setup_604_hid0)
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SIED|HID0_BHTE
ori r8,r11,HID0_BTCD
@@ -110,6 +113,7 @@ setup_604_hid0:
sync
isync
blr
+SYM_FUNC_END(setup_604_hid0)
/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
* erratas we work around here.
@@ -125,13 +129,14 @@ setup_604_hid0:
* needed once we have applied workaround #5 (though it's
* not set by Apple's firmware at least).
*/
-setup_7400_workarounds:
+SYM_FUNC_START_LOCAL(setup_7400_workarounds)
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0207
ble 1f
blr
-setup_7410_workarounds:
+SYM_FUNC_END(setup_7400_workarounds)
+SYM_FUNC_START_LOCAL(setup_7410_workarounds)
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0100
@@ -151,6 +156,7 @@ setup_7410_workarounds:
sync
isync
blr
+SYM_FUNC_END(setup_7410_workarounds)
/* 740/750/7400/7410
* Enable Store Gathering (SGE), Address Broadcast (ABE),
@@ -158,7 +164,7 @@ setup_7410_workarounds:
* Dynamic Power Management (DPM), Speculative (SPD)
* Clear Instruction cache throttling (ICTC)
*/
-setup_750_7400_hid0:
+SYM_FUNC_START_LOCAL(setup_750_7400_hid0)
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
oris r11,r11,HID0_DPM@h
@@ -177,12 +183,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
sync
isync
blr
+SYM_FUNC_END(setup_750_7400_hid0)
/* 750cx specific
* Looks like we have to disable NAP feature for some PLL settings...
* (waiting for confirmation)
*/
-setup_750cx:
+SYM_FUNC_START_LOCAL(setup_750cx)
mfspr r10, SPRN_HID1
rlwinm r10,r10,4,28,31
cmpwi cr0,r10,7
@@ -196,11 +203,13 @@ setup_750cx:
andc r6,r6,r7
stw r6,CPU_SPEC_FEATURES(r4)
blr
+SYM_FUNC_END(setup_750cx)
/* 750fx specific
*/
-setup_750fx:
+SYM_FUNC_START_LOCAL(setup_750fx)
blr
+SYM_FUNC_END(setup_750fx)
/* MPC 745x
* Enable Store Gathering (SGE), Branch Folding (FOLD)
@@ -212,7 +221,7 @@ setup_750fx:
* Clear Instruction cache throttling (ICTC)
* Enable L2 HW prefetch
*/
-setup_745x_specifics:
+SYM_FUNC_START_LOCAL(setup_745x_specifics)
/* We check for the presence of an L3 cache setup by
* the firmware. If any, we disable NAP capability as
* it's known to be bogus on rev 2.1 and earlier
@@ -270,6 +279,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
sync
isync
blr
+SYM_FUNC_END(setup_745x_specifics)
/*
* Initialize the FPU registers. This is needed to work around an errata
diff --git a/arch/powerpc/kernel/cpu_setup_e500.S b/arch/powerpc/kernel/cpu_setup_e500.S
index 2ab25161b0ad..077cfccc3461 100644
--- a/arch/powerpc/kernel/cpu_setup_e500.S
+++ b/arch/powerpc/kernel/cpu_setup_e500.S
@@ -8,6 +8,8 @@
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*/
+#include <linux/linkage.h>
+
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/cputable.h>
@@ -274,7 +276,7 @@ _GLOBAL(flush_dcache_L1)
blr
-has_L2_cache:
+SYM_FUNC_START_LOCAL(has_L2_cache)
/* skip L2 cache on P2040/P2040E as they have no L2 cache */
mfspr r3, SPRN_SVR
/* shift right by 8 bits and clear E bit of SVR */
@@ -290,9 +292,10 @@ has_L2_cache:
1:
li r3, 0
blr
+SYM_FUNC_END(has_L2_cache)
/* flush backside L2 cache */
-flush_backside_L2_cache:
+SYM_FUNC_START_LOCAL(flush_backside_L2_cache)
mflr r10
bl has_L2_cache
mtlr r10
@@ -313,6 +316,7 @@ flush_backside_L2_cache:
bne 1b
2:
blr
+SYM_FUNC_END(flush_backside_L2_cache)
_GLOBAL(cpu_down_flush_e500v2)
mflr r0
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 6e99ec10be89..5604c9a1ac22 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -18,6 +18,8 @@
#include <linux/err.h>
#include <linux/sys.h>
#include <linux/threads.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -74,17 +76,18 @@ _ASM_NOKPROBE_SYMBOL(prepare_transfer_to_handler)
#endif /* CONFIG_PPC_BOOK3S_32 || CONFIG_PPC_E500 */
#if defined(CONFIG_PPC_KUEP) && defined(CONFIG_PPC_BOOK3S_32)
- .globl __kuep_lock
-__kuep_lock:
+SYM_FUNC_START(__kuep_lock)
lwz r9, THREAD+THSR0(r2)
update_user_segments_by_4 r9, r10, r11, r12
blr
+SYM_FUNC_END(__kuep_lock)
-__kuep_unlock:
+SYM_FUNC_START_LOCAL(__kuep_unlock)
lwz r9, THREAD+THSR0(r2)
rlwinm r9,r9,0,~SR_NX
update_user_segments_by_4 r9, r10, r11, r12
blr
+SYM_FUNC_END(__kuep_unlock)
.macro kuep_lock
bl __kuep_lock
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 3e2e37e6ecab..1bf1121e17f1 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -14,6 +14,7 @@
* code, and exception/interrupt return code for PowerPC.
*/
+#include <linux/objtool.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/cache.h>
@@ -73,6 +74,7 @@ flush_branch_caches:
// Flush the link stack
.rept 64
+ ANNOTATE_INTRA_FUNCTION_CALL
bl .+4
.endr
b 1f
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 429096b037d7..6441a1ba57ac 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -13,6 +13,7 @@
*
*/
+#include <linux/linkage.h>
#include <asm/hw_irq.h>
#include <asm/exception-64s.h>
#include <asm/ptrace.h>
@@ -3140,7 +3141,7 @@ _GLOBAL(enable_machine_check)
blr
/* MSR[RI] should be clear because this uses SRR[01] */
-disable_machine_check:
+SYM_FUNC_START_LOCAL(disable_machine_check)
mflr r0
bcl 20,31,$+4
0: mflr r3
@@ -3153,3 +3154,4 @@ disable_machine_check:
RFI_TO_KERNEL
1: mtlr r0
blr
+SYM_FUNC_END(disable_machine_check)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 918547b93b5e..3f68a1624646 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -28,6 +28,8 @@
#include <linux/init.h>
#include <linux/pgtable.h>
#include <linux/sizes.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -662,7 +664,7 @@ start_here:
* kernel initialization. This maps the first 32 MBytes of memory 1:1
* virtual to physical and more importantly sets the cache mode.
*/
-initial_mmu:
+SYM_FUNC_START_LOCAL(initial_mmu)
tlbia /* Invalidate all TLB entries */
isync
@@ -711,6 +713,7 @@ initial_mmu:
mtspr SPRN_EVPR,r0
blr
+SYM_FUNC_END(initial_mmu)
_GLOBAL(abort)
mfspr r13,SPRN_DBCR0
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b513d13bf79e..7558ba4eb864 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -18,6 +18,7 @@
* variants.
*/
+#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <asm/reg.h>
@@ -462,7 +463,7 @@ generic_secondary_common_init:
* Assumes we're mapped EA == RA if the MMU is on.
*/
#ifdef CONFIG_PPC_BOOK3S
-__mmu_off:
+SYM_FUNC_START_LOCAL(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
beqlr
@@ -473,6 +474,7 @@ __mmu_off:
sync
rfid
b . /* prevent speculative execution */
+SYM_FUNC_END(__mmu_off)
#endif
@@ -869,7 +871,7 @@ _GLOBAL(start_secondary_resume)
/*
* This subroutine clobbers r11 and r12
*/
-enable_64b_mode:
+SYM_FUNC_START_LOCAL(enable_64b_mode)
mfmsr r11 /* grab the current MSR */
#ifdef CONFIG_PPC_BOOK3E_64
oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
@@ -881,6 +883,7 @@ enable_64b_mode:
isync
#endif
blr
+SYM_FUNC_END(enable_64b_mode)
/*
* This puts the TOC pointer into r2, offset by 0x8000 (as expected
diff --git a/arch/powerpc/kernel/head_85xx.S b/arch/powerpc/kernel/head_85xx.S
index d9bd377dec91..d438ca74e96c 100644
--- a/arch/powerpc/kernel/head_85xx.S
+++ b/arch/powerpc/kernel/head_85xx.S
@@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/threads.h>
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -885,7 +887,7 @@ KernelSPE:
* Translate the effec addr in r3 to phys addr. The phys addr will be put
* into r3(higher 32bit) and r4(lower 32bit)
*/
-get_phys_addr:
+SYM_FUNC_START_LOCAL(get_phys_addr)
mfmsr r8
mfspr r9,SPRN_PID
rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */
@@ -907,6 +909,7 @@ get_phys_addr:
mfspr r3,SPRN_MAS7
#endif
blr
+SYM_FUNC_END(get_phys_addr)
/*
* Global functions
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index cf546d0e5c40..a79751e05781 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -18,6 +18,8 @@
#include <linux/magic.h>
#include <linux/pgtable.h>
#include <linux/sizes.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -625,7 +627,7 @@ start_here:
* 24 Mbytes of data, and the 512k IMMR space. Anything not covered by
* these mappings is mapped by page tables.
*/
-initial_mmu:
+SYM_FUNC_START_LOCAL(initial_mmu)
li r8, 0
mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */
lis r10, MD_TWAM@h
@@ -686,6 +688,7 @@ initial_mmu:
#endif
mtspr SPRN_DER, r8
blr
+SYM_FUNC_END(initial_mmu)
_GLOBAL(mmu_pin_tlb)
lis r9, (1f - PAGE_OFFSET)@h
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 40854d092dd3..c51f28b5abc0 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -18,6 +18,8 @@
#include <linux/init.h>
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -877,7 +879,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
* Load stuff into the MMU. Intended to be called with
* IR=0 and DR=0.
*/
-early_hash_table:
+SYM_FUNC_START_LOCAL(early_hash_table)
sync /* Force all PTE updates to finish */
isync
tlbia /* Clear all TLB entries */
@@ -888,8 +890,9 @@ early_hash_table:
ori r6, r6, 3 /* 256kB table */
mtspr SPRN_SDR1, r6
blr
+SYM_FUNC_END(early_hash_table)
-load_up_mmu:
+SYM_FUNC_START_LOCAL(load_up_mmu)
sync /* Force all PTE updates to finish */
isync
tlbia /* Clear all TLB entries */
@@ -918,6 +921,7 @@ BEGIN_MMU_FTR_SECTION
LOAD_BAT(7,r3,r4,r5)
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+SYM_FUNC_END(load_up_mmu)
_GLOBAL(load_segment_registers)
li r0, NUM_USER_SEGMENTS /* load up user segment register values */
@@ -1028,7 +1032,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
* this makes sure it's done.
* -- Cort
*/
-clear_bats:
+SYM_FUNC_START_LOCAL(clear_bats)
li r10,0
mtspr SPRN_DBAT0U,r10
@@ -1072,6 +1076,7 @@ BEGIN_MMU_FTR_SECTION
mtspr SPRN_IBAT7L,r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+SYM_FUNC_END(clear_bats)
_GLOBAL(update_bats)
lis r4, 1f@h
@@ -1108,15 +1113,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
mtspr SPRN_SRR1, r6
rfi
-flush_tlbs:
+SYM_FUNC_START_LOCAL(flush_tlbs)
lis r10, 0x40
1: addic. r10, r10, -0x1000
tlbie r10
bgt 1b
sync
blr
+SYM_FUNC_END(flush_tlbs)
-mmu_off:
+SYM_FUNC_START_LOCAL(mmu_off)
addi r4, r3, __after_mmu_off - _start
mfmsr r3
andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
@@ -1128,9 +1134,10 @@ mmu_off:
mtspr SPRN_SRR1,r3
sync
rfi
+SYM_FUNC_END(mmu_off)
/* We use one BAT to map up to 256M of RAM at _PAGE_OFFSET */
-initial_bats:
+SYM_FUNC_START_LOCAL(initial_bats)
lis r11,PAGE_OFFSET@h
tophys(r8,r11)
#ifdef CONFIG_SMP
@@ -1146,9 +1153,10 @@ initial_bats:
mtspr SPRN_IBAT0U,r11
isync
blr
+SYM_FUNC_END(initial_bats)
#ifdef CONFIG_BOOTX_TEXT
-setup_disp_bat:
+SYM_FUNC_START_LOCAL(setup_disp_bat)
/*
* setup the display bat prepared for us in prom.c
*/
@@ -1164,10 +1172,11 @@ setup_disp_bat:
mtspr SPRN_DBAT3L,r8
mtspr SPRN_DBAT3U,r11
blr
+SYM_FUNC_END(setup_disp_bat)
#endif /* CONFIG_BOOTX_TEXT */
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-setup_cpm_bat:
+SYM_FUNC_START_LOCAL(setup_cpm_bat)
lis r8, 0xf000
ori r8, r8, 0x002a
mtspr SPRN_DBAT1L, r8
@@ -1177,10 +1186,11 @@ setup_cpm_bat:
mtspr SPRN_DBAT1U, r11
blr
+SYM_FUNC_END(setup_cpm_bat)
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
-setup_usbgecko_bat:
+SYM_FUNC_START_LOCAL(setup_usbgecko_bat)
/* prepare a BAT for early io */
#if defined(CONFIG_GAMECUBE)
lis r8, 0x0c00
@@ -1199,6 +1209,7 @@ setup_usbgecko_bat:
mtspr SPRN_DBAT1L, r8
mtspr SPRN_DBAT1U, r11
blr
+SYM_FUNC_END(setup_usbgecko_bat)
#endif
.data
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 4bb6dd30c556..c39c07a4c06e 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -9,6 +9,7 @@
* PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
*/
+#include <linux/linkage.h>
#include <linux/sys.h>
#include <asm/unistd.h>
#include <asm/errno.h>
@@ -353,7 +354,7 @@ _GLOBAL(kexec_smp_wait)
*
* don't overwrite r3 here, it is live for kexec_wait above.
*/
-real_mode: /* assume normal blr return */
+SYM_FUNC_START_LOCAL(real_mode) /* assume normal blr return */
#ifdef CONFIG_PPC_BOOK3E_64
/* Create an identity mapping. */
b kexec_create_tlb
@@ -370,6 +371,7 @@ real_mode: /* assume normal blr return */
mtspr SPRN_SRR0,r11
rfid
#endif
+SYM_FUNC_END(real_mode)
/*
* kexec_sequence(newstack, start, image, control, clear_all(),
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index e0cbd63007f2..ffb79326483c 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/threads.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
@@ -400,7 +402,7 @@ _ASM_NOKPROBE_SYMBOL(swsusp_arch_resume)
/* FIXME:This construct is actually not useful since we don't shut
* down the instruction MMU, we could just flip back MSR-DR on.
*/
-turn_on_mmu:
+SYM_FUNC_START_LOCAL(turn_on_mmu)
mflr r4
mtsrr0 r4
mtsrr1 r3
@@ -408,4 +410,5 @@ turn_on_mmu:
isync
rfi
_ASM_NOKPROBE_SYMBOL(turn_on_mmu)
+SYM_FUNC_END(turn_on_mmu)
diff --git a/arch/powerpc/kernel/vdso/Makefile b/arch/powerpc/kernel/vdso/Makefile
index a2e7b0ce5b19..6a977b0d8ffc 100644
--- a/arch/powerpc/kernel/vdso/Makefile
+++ b/arch/powerpc/kernel/vdso/Makefile
@@ -102,3 +102,5 @@ quiet_cmd_vdso64ld_and_check = VDSO64L $@
cmd_vdso64ld_and_check = $(VDSOCC) $(c_flags) $(CC64FLAGS) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^) -z noexecstack ; $(cmd_vdso_check)
quiet_cmd_vdso64as = VDSO64A $@
cmd_vdso64as = $(VDSOCC) $(a_flags) $(CC64FLAGS) $(AS64FLAGS) -c -o $@ $<
+
+OBJECT_FILES_NON_STANDARD := y
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 5cf64740edb8..ffe5d90abe17 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -1,4 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/reg.h>
@@ -185,7 +186,7 @@ fphalf:
* Internal routine to enable floating point and set FPSCR to 0.
* Don't call it from C; it doesn't use the normal calling convention.
*/
-fpenable:
+SYM_FUNC_START_LOCAL(fpenable)
#ifdef CONFIG_PPC32
stwu r1,-64(r1)
#else
@@ -202,6 +203,7 @@ fpenable:
mffs fr31
MTFSF_L(fr1)
blr
+SYM_FUNC_END(fpenable)
fpdisable:
mtlr r12
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index 59d89e4b154a..c0deeea7eef3 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -9,6 +9,7 @@
* Authors: Alexander Graf <agraf@suse.de>
*/
+#include <linux/linkage.h>
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
@@ -107,7 +108,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/*
* void kvmhv_save_host_pmu(void)
*/
-kvmhv_save_host_pmu:
+SYM_FUNC_START_LOCAL(kvmhv_save_host_pmu)
BEGIN_FTR_SECTION
/* Work around P8 PMAE bug */
li r3, -1
@@ -154,3 +155,4 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
stw r8, HSTATE_PMC5(r13)
stw r9, HSTATE_PMC6(r13)
31: blr
+SYM_FUNC_END(kvmhv_save_host_pmu)
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a9e162a1deec..acf80915f406 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -10,6 +10,8 @@
* Authors: Alexander Graf <agraf@suse.de>
*/
+#include <linux/linkage.h>
+#include <linux/objtool.h>
#include <asm/ppc_asm.h>
#include <asm/code-patching-asm.h>
#include <asm/kvm_asm.h>
@@ -1522,12 +1524,14 @@ kvm_flush_link_stack:
/* Flush the link stack. On Power8 it's up to 32 entries in size. */
.rept 32
+ ANNOTATE_INTRA_FUNCTION_CALL
bl .+4
.endr
/* And on Power9 it's up to 64. */
BEGIN_FTR_SECTION
.rept 32
+ ANNOTATE_INTRA_FUNCTION_CALL
bl .+4
.endr
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
@@ -2358,7 +2362,7 @@ hmi_realmode:
* This routine calls kvmppc_read_intr, a C function, if an external
* interrupt is pending.
*/
-kvmppc_check_wake_reason:
+SYM_FUNC_START_LOCAL(kvmppc_check_wake_reason)
mfspr r6, SPRN_SRR1
BEGIN_FTR_SECTION
rlwinm r6, r6, 45-31, 0xf /* extract wake reason field (P8) */
@@ -2427,6 +2431,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
addi r1, r1, PPC_MIN_STKFRM
mtlr r0
blr
+SYM_FUNC_END(kvmppc_check_wake_reason)
/*
* Save away FP, VMX and VSX registers.
@@ -2434,7 +2439,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
* N.B. r30 and r31 are volatile across this function,
* thus it is not callable from C.
*/
-kvmppc_save_fp:
+SYM_FUNC_START_LOCAL(kvmppc_save_fp)
mflr r30
mr r31,r3
mfmsr r5
@@ -2462,6 +2467,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
stw r6,VCPU_VRSAVE(r31)
mtlr r30
blr
+SYM_FUNC_END(kvmppc_save_fp)
/*
* Load up FP, VMX and VSX registers
@@ -2469,7 +2475,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
* N.B. r30 and r31 are volatile across this function,
* thus it is not callable from C.
*/
-kvmppc_load_fp:
+SYM_FUNC_START_LOCAL(kvmppc_load_fp)
mflr r30
mr r31,r4
mfmsr r9
@@ -2498,6 +2504,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mtlr r30
mr r4,r31
blr
+SYM_FUNC_END(kvmppc_load_fp)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/*
@@ -2746,7 +2753,7 @@ kvmppc_bad_host_intr:
* r9 has a vcpu pointer (in)
* r0 is used as a scratch register
*/
-kvmppc_msr_interrupt:
+SYM_FUNC_START_LOCAL(kvmppc_msr_interrupt)
rldicl r0, r11, 64 - MSR_TS_S_LG, 62
cmpwi r0, 2 /* Check if we are in transactional state.. */
ld r11, VCPU_INTR_MSR(r9)
@@ -2755,13 +2762,14 @@ kvmppc_msr_interrupt:
li r0, 1
1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG
blr
+SYM_FUNC_END(kvmppc_msr_interrupt)
/*
* void kvmhv_load_guest_pmu(struct kvm_vcpu *vcpu)
*
* Load up guest PMU state. R3 points to the vcpu struct.
*/
-kvmhv_load_guest_pmu:
+SYM_FUNC_START_LOCAL(kvmhv_load_guest_pmu)
mr r4, r3
mflr r0
li r3, 1
@@ -2811,13 +2819,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
isync
mtlr r0
blr
+SYM_FUNC_END(kvmhv_load_guest_pmu)
/*
* void kvmhv_load_host_pmu(void)
*
* Reload host PMU state saved in the PACA by kvmhv_save_host_pmu.
*/
-kvmhv_load_host_pmu:
+SYM_FUNC_START_LOCAL(kvmhv_load_host_pmu)
mflr r0
lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r4, 0
@@ -2859,6 +2868,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
isync
mtlr r0
23: blr
+SYM_FUNC_END(kvmhv_load_host_pmu)
/*
* void kvmhv_save_guest_pmu(struct kvm_vcpu *vcpu, bool pmu_in_use)
@@ -2866,7 +2876,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
* Save guest PMU state into the vcpu struct.
* r3 = vcpu, r4 = full save flag (PMU in use flag set in VPA)
*/
-kvmhv_save_guest_pmu:
+SYM_FUNC_START_LOCAL(kvmhv_save_guest_pmu)
mr r9, r3
mr r8, r4
BEGIN_FTR_SECTION
@@ -2942,6 +2952,7 @@ BEGIN_FTR_SECTION
mtspr SPRN_MMCRS, r4
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
22: blr
+SYM_FUNC_END(kvmhv_save_guest_pmu)
/*
* This works around a hardware bug on POWER8E processors, where
diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S
index 315c94946bad..b68e7f26a81f 100644
--- a/arch/powerpc/kvm/fpu.S
+++ b/arch/powerpc/kvm/fpu.S
@@ -6,6 +6,8 @@
*/
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -110,18 +112,22 @@ FPS_THREE_IN(fsel)
* R8 = (double*)&param3 [load_three]
* LR = instruction call function
*/
-fpd_load_three:
+SYM_FUNC_START_LOCAL(fpd_load_three)
lfd 2,0(r8) /* load param3 */
-fpd_load_two:
+SYM_FUNC_START_LOCAL(fpd_load_two)
lfd 1,0(r7) /* load param2 */
-fpd_load_one:
+SYM_FUNC_START_LOCAL(fpd_load_one)
lfd 0,0(r6) /* load param1 */
-fpd_load_none:
+SYM_FUNC_START_LOCAL(fpd_load_none)
lfd 3,0(r3) /* load up fpscr value */
MTFSF_L(3)
lwz r6, 0(r4) /* load cr */
mtcr r6
blr
+SYM_FUNC_END(fpd_load_none)
+SYM_FUNC_END(fpd_load_one)
+SYM_FUNC_END(fpd_load_two)
+SYM_FUNC_END(fpd_load_three)
/*
* End of double instruction processing
@@ -131,13 +137,14 @@ fpd_load_none:
* R5 = (double*)&result
* LR = caller of instruction call function
*/
-fpd_return:
+SYM_FUNC_START_LOCAL(fpd_return)
mfcr r6
stfd 0,0(r5) /* save result */
mffs 0
stfd 0,0(r3) /* save new fpscr value */
stw r6,0(r4) /* save new cr value */
blr
+SYM_FUNC_END(fpd_return)
/*
* Double operation with no input operand
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
index afee8b1515a8..0b12647e7b42 100644
--- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -1,4 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/ppc_asm.h>
#include <asm/processor.h>
@@ -178,7 +180,8 @@ sram_code:
/* local udelay in sram is needed */
- udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
+SYM_FUNC_START_LOCAL(udelay)
+ /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
add r12, r13, r12 /* end */
@@ -187,6 +190,7 @@ sram_code:
cmp cr0, r13, r12
blt 1b
blr
+SYM_FUNC_END(udelay)
sram_code_end:
@@ -271,7 +275,7 @@ _ASM_NOKPROBE_SYMBOL(lite5200_wakeup)
SAVE_SR(n+2, addr+2); \
SAVE_SR(n+3, addr+3);
-save_regs:
+SYM_FUNC_START_LOCAL(save_regs)
stw r0, 0(r4)
stw r1, 0x4(r4)
stw r2, 0x8(r4)
@@ -317,6 +321,7 @@ save_regs:
SAVE_SPRN(TBRU, 0x5b)
blr
+SYM_FUNC_END(save_regs)
/* restore registers */
@@ -336,7 +341,7 @@ save_regs:
LOAD_SR(n+2, addr+2); \
LOAD_SR(n+3, addr+3);
-restore_regs:
+SYM_FUNC_START_LOCAL(restore_regs)
lis r4, registers@h
ori r4, r4, registers@l
@@ -393,6 +398,7 @@ restore_regs:
blr
_ASM_NOKPROBE_SYMBOL(restore_regs)
+SYM_FUNC_END(restore_regs)
@@ -403,7 +409,7 @@ _ASM_NOKPROBE_SYMBOL(restore_regs)
* Flush data cache
* Do this by just reading lots of stuff into the cache.
*/
-flush_data_cache:
+SYM_FUNC_START_LOCAL(flush_data_cache)
lis r3,CONFIG_KERNEL_START@h
ori r3,r3,CONFIG_KERNEL_START@l
li r4,NUM_CACHE_LINES
@@ -413,3 +419,4 @@ flush_data_cache:
addi r3,r3,L1_CACHE_BYTES /* Next line, please */
bdnz 1b
blr
+SYM_FUNC_END(flush_data_cache)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 67745ceab0db..4be7c06a5d18 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -195,6 +195,7 @@ config X86
select HAVE_CONTEXT_TRACKING_USER_OFFSTACK if HAVE_CONTEXT_TRACKING_USER
select HAVE_C_RECORDMCOUNT
select HAVE_OBJTOOL_MCOUNT if HAVE_OBJTOOL
+ select HAVE_OBJTOOL_NOP_MCOUNT if HAVE_OBJTOOL_MCOUNT
select HAVE_BUILDTIME_MCOUNT_SORT
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS
diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
index e33c7238e7f8..7257b8c44626 100644
--- a/drivers/crypto/vmx/Makefile
+++ b/drivers/crypto/vmx/Makefile
@@ -19,3 +19,5 @@ targets += aesp8-ppc.S ghashp8-ppc.S
$(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE
$(call if_changed,perl)
+
+OBJECT_FILES_NON_STANDARD_aesp8-ppc.o := y
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index e9e95c790b8e..2b782321376a 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -82,6 +82,13 @@ config HAVE_OBJTOOL_MCOUNT
help
Arch supports objtool --mcount
+config HAVE_OBJTOOL_NOP_MCOUNT
+ bool
+ help
+ Arch supports the objtool options --mcount with --mnop.
+ An architecture can select this if it wants to enable nop'ing
+ of ftrace locations.
+
config HAVE_C_RECORDMCOUNT
bool
help
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 3aa384cec76b..658f541c2782 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -256,6 +256,9 @@ objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK) += --hacks=jump_label
objtool-args-$(CONFIG_HAVE_NOINSTR_HACK) += --hacks=noinstr
objtool-args-$(CONFIG_X86_KERNEL_IBT) += --ibt
objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL) += --mcount
+ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
+objtool-args-$(CONFIG_HAVE_OBJTOOL_NOP_MCOUNT) += --mnop
+endif
objtool-args-$(CONFIG_UNWINDER_ORC) += --orc
objtool-args-$(CONFIG_RETPOLINE) += --retpoline
objtool-args-$(CONFIG_RETHUNK) += --rethunk
diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
new file mode 100644
index 000000000000..d24d5636a5b8
--- /dev/null
+++ b/tools/objtool/arch/powerpc/Build
@@ -0,0 +1,2 @@
+objtool-y += decode.o
+objtool-y += special.o
diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
new file mode 100644
index 000000000000..9c653805a08a
--- /dev/null
+++ b/tools/objtool/arch/powerpc/decode.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <objtool/check.h>
+#include <objtool/elf.h>
+#include <objtool/arch.h>
+#include <objtool/warn.h>
+#include <objtool/builtin.h>
+#include <objtool/endianness.h>
+
+int arch_ftrace_match(char *name)
+{
+ return !strcmp(name, "_mcount");
+}
+
+unsigned long arch_dest_reloc_offset(int addend)
+{
+ return addend;
+}
+
+bool arch_callee_saved_reg(unsigned char reg)
+{
+ return false;
+}
+
+int arch_decode_hint_reg(u8 sp_reg, int *base)
+{
+ exit(-1);
+}
+
+const char *arch_nop_insn(int len)
+{
+ exit(-1);
+}
+
+const char *arch_ret_insn(int len)
+{
+ exit(-1);
+}
+
+int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
+ unsigned long offset, unsigned int maxlen,
+ unsigned int *len, enum insn_type *type,
+ unsigned long *immediate,
+ struct list_head *ops_list)
+{
+ unsigned int opcode;
+ enum insn_type typ;
+ unsigned long imm;
+ u32 insn;
+
+ insn = bswap_if_needed(file->elf, *(u32 *)(sec->data->d_buf + offset));
+ opcode = insn >> 26;
+ typ = INSN_OTHER;
+ imm = 0;
+
+ switch (opcode) {
+ case 18: /* b[l][a] */
+ if ((insn & 3) == 1) /* bl */
+ typ = INSN_CALL;
+
+ imm = insn & 0x3fffffc;
+ if (imm & 0x2000000)
+ imm -= 0x4000000;
+ break;
+ }
+
+ if (opcode == 1)
+ *len = 8;
+ else
+ *len = 4;
+
+ *type = typ;
+ *immediate = imm;
+
+ return 0;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->immediate;
+}
+
+bool arch_pc_relative_reloc(struct reloc *reloc)
+{
+ /*
+ * The powerpc build only allows certain relocation types, see
+ * relocs_check.sh, and none of those accepted are PC relative.
+ */
+ return false;
+}
+
+void arch_initial_func_cfi_state(struct cfi_init_state *state)
+{
+ int i;
+
+ for (i = 0; i < CFI_NUM_REGS; i++) {
+ state->regs[i].base = CFI_UNDEFINED;
+ state->regs[i].offset = 0;
+ }
+
+ /* initial CFA (call frame address) */
+ state->cfa.base = CFI_SP;
+ state->cfa.offset = 0;
+
+ /* initial LR (return address) */
+ state->regs[CFI_RA].base = CFI_CFA;
+ state->regs[CFI_RA].offset = 0;
+}
diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
new file mode 100644
index 000000000000..59638ebeafc8
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_CFI_REGS_H
+#define _OBJTOOL_CFI_REGS_H
+
+#define CFI_BP 1
+#define CFI_SP CFI_BP
+#define CFI_RA 32
+#define CFI_NUM_REGS 33
+
+#endif
diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
new file mode 100644
index 000000000000..73f9ae172fe5
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/elf.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_ARCH_ELF
+#define _OBJTOOL_ARCH_ELF
+
+#define R_NONE R_PPC_NONE
+#define R_ABS64 R_PPC64_ADDR64
+#define R_ABS32 R_PPC_ADDR32
+
+#endif /* _OBJTOOL_ARCH_ELF */
diff --git a/tools/objtool/arch/powerpc/include/arch/special.h b/tools/objtool/arch/powerpc/include/arch/special.h
new file mode 100644
index 000000000000..ffef9ada7133
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/special.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _PPC_ARCH_SPECIAL_H
+#define _PPC_ARCH_SPECIAL_H
+
+#define EX_ENTRY_SIZE 8
+#define EX_ORIG_OFFSET 0
+#define EX_NEW_OFFSET 4
+
+#define JUMP_ENTRY_SIZE 16
+#define JUMP_ORIG_OFFSET 0
+#define JUMP_NEW_OFFSET 4
+#define JUMP_KEY_OFFSET 8
+
+#define ALT_ENTRY_SIZE 12
+#define ALT_ORIG_OFFSET 0
+#define ALT_NEW_OFFSET 4
+#define ALT_FEATURE_OFFSET 8
+#define ALT_ORIG_LEN_OFFSET 10
+#define ALT_NEW_LEN_OFFSET 11
+
+#endif /* _PPC_ARCH_SPECIAL_H */
diff --git a/tools/objtool/arch/powerpc/special.c b/tools/objtool/arch/powerpc/special.c
new file mode 100644
index 000000000000..d33868147196
--- /dev/null
+++ b/tools/objtool/arch/powerpc/special.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <string.h>
+#include <stdlib.h>
+#include <objtool/special.h>
+#include <objtool/builtin.h>
+
+
+bool arch_support_alt_relocation(struct special_alt *special_alt,
+ struct instruction *insn,
+ struct reloc *reloc)
+{
+ exit(-1);
+}
+
+struct reloc *arch_find_switch_table(struct objtool_file *file,
+ struct instruction *insn)
+{
+ exit(-1);
+}
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
index 1c253b4b7ce0..af7ad09c926c 100644
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -23,6 +23,11 @@
#include <objtool/builtin.h>
#include <arch/elf.h>
+int arch_ftrace_match(char *name)
+{
+ return !strcmp(name, "__fentry__");
+}
+
static int is_x86_64(const struct elf *elf)
{
switch (elf->ehdr.e_machine) {
diff --git a/tools/objtool/arch/x86/include/arch/elf.h b/tools/objtool/arch/x86/include/arch/elf.h
index 69cc4264b28a..ac14987cf687 100644
--- a/tools/objtool/arch/x86/include/arch/elf.h
+++ b/tools/objtool/arch/x86/include/arch/elf.h
@@ -2,5 +2,7 @@
#define _OBJTOOL_ARCH_ELF
#define R_NONE R_X86_64_NONE
+#define R_ABS64 R_X86_64_64
+#define R_ABS32 R_X86_64_32
#endif /* _OBJTOOL_ARCH_ELF */
diff --git a/tools/objtool/arch/x86/include/arch/endianness.h b/tools/objtool/arch/x86/include/arch/endianness.h
deleted file mode 100644
index 7c362527da20..000000000000
--- a/tools/objtool/arch/x86/include/arch/endianness.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-#ifndef _ARCH_ENDIANNESS_H
-#define _ARCH_ENDIANNESS_H
-
-#include <endian.h>
-
-#define __TARGET_BYTE_ORDER __LITTLE_ENDIAN
-
-#endif /* _ARCH_ENDIANNESS_H */
diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 24fbe803a0d3..9bd347d3c244 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -82,6 +82,7 @@ const struct option check_options[] = {
OPT_BOOLEAN(0, "dry-run", &opts.dryrun, "don't write modifications"),
OPT_BOOLEAN(0, "link", &opts.link, "object is a linked object"),
OPT_BOOLEAN(0, "module", &opts.module, "object is part of a kernel module"),
+ OPT_BOOLEAN(0, "mnop", &opts.mnop, "nop out mcount call sites"),
OPT_BOOLEAN(0, "no-unreachable", &opts.no_unreachable, "skip 'unreachable instruction' warnings"),
OPT_BOOLEAN(0, "sec-address", &opts.sec_address, "print section addresses in warnings"),
OPT_BOOLEAN(0, "stats", &opts.stats, "print statistics"),
@@ -150,6 +151,16 @@ static bool opts_valid(void)
return false;
}
+static bool mnop_opts_valid(void)
+{
+ if (opts.mnop && !opts.mcount) {
+ ERROR("--mnop requires --mcount");
+ return false;
+ }
+
+ return true;
+}
+
static bool link_opts_valid(struct objtool_file *file)
{
if (opts.link)
@@ -198,6 +209,9 @@ int objtool_run(int argc, const char **argv)
if (!file)
return 1;
+ if (!mnop_opts_valid())
+ return 1;
+
if (!link_opts_valid(file))
return 1;
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 43ec14c29a60..7580c66ca5c8 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -207,7 +207,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
return false;
insn = find_insn(file, func->sec, func->offset);
- if (!insn->func)
+ if (!insn || !insn->func)
return false;
func_for_each_insn(file, func, insn) {
@@ -852,9 +852,9 @@ static int create_ibt_endbr_seal_sections(struct objtool_file *file)
static int create_mcount_loc_sections(struct objtool_file *file)
{
- struct section *sec;
- unsigned long *loc;
+ int addrsize = elf_class_addrsize(file->elf);
struct instruction *insn;
+ struct section *sec;
int idx;
sec = find_section_by_name(file->elf, "__mcount_loc");
@@ -871,23 +871,25 @@ static int create_mcount_loc_sections(struct objtool_file *file)
list_for_each_entry(insn, &file->mcount_loc_list, call_node)
idx++;
- sec = elf_create_section(file->elf, "__mcount_loc", 0, sizeof(unsigned long), idx);
+ sec = elf_create_section(file->elf, "__mcount_loc", 0, addrsize, idx);
if (!sec)
return -1;
+ sec->sh.sh_addralign = addrsize;
+
idx = 0;
list_for_each_entry(insn, &file->mcount_loc_list, call_node) {
+ void *loc;
- loc = (unsigned long *)sec->data->d_buf + idx;
- memset(loc, 0, sizeof(unsigned long));
+ loc = sec->data->d_buf + idx;
+ memset(loc, 0, addrsize);
- if (elf_add_reloc_to_insn(file->elf, sec,
- idx * sizeof(unsigned long),
- R_X86_64_64,
+ if (elf_add_reloc_to_insn(file->elf, sec, idx,
+ addrsize == sizeof(u64) ? R_ABS64 : R_ABS32,
insn->sec, insn->offset))
return -1;
- idx++;
+ idx += addrsize;
}
return 0;
@@ -1254,17 +1256,18 @@ static void annotate_call_site(struct objtool_file *file,
if (opts.mcount && sym->fentry) {
if (sibling)
WARN_FUNC("Tail call to __fentry__ !?!?", insn->sec, insn->offset);
+ if (opts.mnop) {
+ if (reloc) {
+ reloc->type = R_NONE;
+ elf_write_reloc(file->elf, reloc);
+ }
- if (reloc) {
- reloc->type = R_NONE;
- elf_write_reloc(file->elf, reloc);
- }
-
- elf_write_insn(file->elf, insn->sec,
- insn->offset, insn->len,
- arch_nop_insn(insn->len));
+ elf_write_insn(file->elf, insn->sec,
+ insn->offset, insn->len,
+ arch_nop_insn(insn->len));
- insn->type = INSN_NOP;
+ insn->type = INSN_NOP;
+ }
list_add_tail(&insn->call_node, &file->mcount_loc_list);
return;
@@ -2100,7 +2103,7 @@ static int read_unwind_hints(struct objtool_file *file)
return -1;
}
- cfi.cfa.offset = bswap_if_needed(hint->sp_offset);
+ cfi.cfa.offset = bswap_if_needed(file->elf, hint->sp_offset);
cfi.type = hint->type;
cfi.end = hint->end;
@@ -2313,7 +2316,7 @@ static int classify_symbols(struct objtool_file *file)
if (arch_is_rethunk(func))
func->return_thunk = true;
- if (!strcmp(func->name, "__fentry__"))
+ if (arch_ftrace_match(func->name))
func->fentry = true;
if (is_profiling_func(func->name))
@@ -2389,9 +2392,11 @@ static int decode_sections(struct objtool_file *file)
* Must be before add_jump_destinations(), which depends on 'func'
* being set for alternatives, to enable proper sibling call detection.
*/
- ret = add_special_section_alts(file);
- if (ret)
- return ret;
+ if (opts.stackval || opts.orc || opts.uaccess || opts.noinstr) {
+ ret = add_special_section_alts(file);
+ if (ret)
+ return ret;
+ }
ret = add_jump_destinations(file);
if (ret)
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 7e24b09b1163..33739865735b 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -1129,6 +1129,7 @@ static struct section *elf_create_rela_reloc_section(struct elf *elf, struct sec
{
char *relocname;
struct section *sec;
+ int addrsize = elf_class_addrsize(elf);
relocname = malloc(strlen(base->name) + strlen(".rela") + 1);
if (!relocname) {
@@ -1138,7 +1139,10 @@ static struct section *elf_create_rela_reloc_section(struct elf *elf, struct sec
strcpy(relocname, ".rela");
strcat(relocname, base->name);
- sec = elf_create_section(elf, relocname, 0, sizeof(GElf_Rela), 0);
+ if (addrsize == sizeof(u32))
+ sec = elf_create_section(elf, relocname, 0, sizeof(Elf32_Rela), 0);
+ else
+ sec = elf_create_section(elf, relocname, 0, sizeof(GElf_Rela), 0);
free(relocname);
if (!sec)
return NULL;
@@ -1147,7 +1151,7 @@ static struct section *elf_create_rela_reloc_section(struct elf *elf, struct sec
sec->base = base;
sec->sh.sh_type = SHT_RELA;
- sec->sh.sh_addralign = 8;
+ sec->sh.sh_addralign = addrsize;
sec->sh.sh_link = find_section_by_name(elf, ".symtab")->idx;
sec->sh.sh_info = base->idx;
sec->sh.sh_flags = SHF_INFO_LINK;
diff --git a/tools/objtool/include/objtool/arch.h b/tools/objtool/include/objtool/arch.h
index beb2f3aa94ff..4ecb480131c7 100644
--- a/tools/objtool/include/objtool/arch.h
+++ b/tools/objtool/include/objtool/arch.h
@@ -69,6 +69,8 @@ struct stack_op {
struct instruction;
+int arch_ftrace_match(char *name);
+
void arch_initial_func_cfi_state(struct cfi_init_state *state);
int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
@@ -93,4 +95,6 @@ bool arch_is_rethunk(struct symbol *sym);
int arch_rewrite_retpolines(struct objtool_file *file);
+bool arch_pc_relative_reloc(struct reloc *reloc);
+
#endif /* _ARCH_H */
diff --git a/tools/objtool/include/objtool/builtin.h b/tools/objtool/include/objtool/builtin.h
index 42a52f1a0add..0785707c5a92 100644
--- a/tools/objtool/include/objtool/builtin.h
+++ b/tools/objtool/include/objtool/builtin.h
@@ -31,6 +31,7 @@ struct opts {
bool backup;
bool dryrun;
bool link;
+ bool mnop;
bool module;
bool no_unreachable;
bool sec_address;
diff --git a/tools/objtool/include/objtool/elf.h b/tools/objtool/include/objtool/elf.h
index 16f4067b82ae..78b3aa2e546d 100644
--- a/tools/objtool/include/objtool/elf.h
+++ b/tools/objtool/include/objtool/elf.h
@@ -142,6 +142,14 @@ static inline bool has_multiple_files(struct elf *elf)
return elf->num_files > 1;
}
+static inline int elf_class_addrsize(struct elf *elf)
+{
+ if (elf->ehdr.e_ident[EI_CLASS] == ELFCLASS32)
+ return sizeof(u32);
+ else
+ return sizeof(u64);
+}
+
struct elf *elf_open_read(const char *name, int flags);
struct section *elf_create_section(struct elf *elf, const char *name, unsigned int sh_flags, size_t entsize, int nr);
diff --git a/tools/objtool/include/objtool/endianness.h b/tools/objtool/include/objtool/endianness.h
index 10241341eff3..4d2aa9b0fe2f 100644
--- a/tools/objtool/include/objtool/endianness.h
+++ b/tools/objtool/include/objtool/endianness.h
@@ -2,33 +2,33 @@
#ifndef _OBJTOOL_ENDIANNESS_H
#define _OBJTOOL_ENDIANNESS_H
-#include <arch/endianness.h>
#include <linux/kernel.h>
#include <endian.h>
-
-#ifndef __TARGET_BYTE_ORDER
-#error undefined arch __TARGET_BYTE_ORDER
-#endif
-
-#if __BYTE_ORDER != __TARGET_BYTE_ORDER
-#define __NEED_BSWAP 1
-#else
-#define __NEED_BSWAP 0
-#endif
+#include <objtool/elf.h>
/*
- * Does a byte swap if target endianness doesn't match the host, i.e. cross
+ * Does a byte swap if target file endianness doesn't match the host, i.e. cross
* compilation for little endian on big endian and vice versa.
* To be used for multi-byte values conversion, which are read from / about
* to be written to a target native endianness ELF file.
*/
-#define bswap_if_needed(val) \
+static inline bool need_bswap(struct elf *elf)
+{
+ return (__BYTE_ORDER == __LITTLE_ENDIAN) ^
+ (elf->ehdr.e_ident[EI_DATA] == ELFDATA2LSB);
+}
+
+#define bswap_if_needed(elf, val) \
({ \
__typeof__(val) __ret; \
+ bool __need_bswap = need_bswap(elf); \
switch (sizeof(val)) { \
- case 8: __ret = __NEED_BSWAP ? bswap_64(val) : (val); break; \
- case 4: __ret = __NEED_BSWAP ? bswap_32(val) : (val); break; \
- case 2: __ret = __NEED_BSWAP ? bswap_16(val) : (val); break; \
+ case 8: \
+ __ret = __need_bswap ? bswap_64(val) : (val); break; \
+ case 4: \
+ __ret = __need_bswap ? bswap_32(val) : (val); break; \
+ case 2: \
+ __ret = __need_bswap ? bswap_16(val) : (val); break; \
default: \
BUILD_BUG(); break; \
} \
diff --git a/tools/objtool/orc_dump.c b/tools/objtool/orc_dump.c
index f5a8508c42d6..4f1211fec82c 100644
--- a/tools/objtool/orc_dump.c
+++ b/tools/objtool/orc_dump.c
@@ -76,6 +76,7 @@ int orc_dump(const char *_objname)
GElf_Rela rela;
GElf_Sym sym;
Elf_Data *data, *symtab = NULL, *rela_orc_ip = NULL;
+ struct elf dummy_elf = {};
objname = _objname;
@@ -94,6 +95,12 @@ int orc_dump(const char *_objname)
return -1;
}
+ if (!elf64_getehdr(elf)) {
+ WARN_ELF("elf64_getehdr");
+ return -1;
+ }
+ memcpy(&dummy_elf.ehdr, elf64_getehdr(elf), sizeof(dummy_elf.ehdr));
+
if (elf_getshdrnum(elf, &nr_sections)) {
WARN_ELF("elf_getshdrnum");
return -1;
@@ -198,11 +205,11 @@ int orc_dump(const char *_objname)
printf(" sp:");
- print_reg(orc[i].sp_reg, bswap_if_needed(orc[i].sp_offset));
+ print_reg(orc[i].sp_reg, bswap_if_needed(&dummy_elf, orc[i].sp_offset));
printf(" bp:");
- print_reg(orc[i].bp_reg, bswap_if_needed(orc[i].bp_offset));
+ print_reg(orc[i].bp_reg, bswap_if_needed(&dummy_elf, orc[i].bp_offset));
printf(" type:%s end:%d\n",
orc_type_name(orc[i].type), orc[i].end);
diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c
index dd3c64af9db2..1f22b7ebae58 100644
--- a/tools/objtool/orc_gen.c
+++ b/tools/objtool/orc_gen.c
@@ -97,8 +97,8 @@ static int write_orc_entry(struct elf *elf, struct section *orc_sec,
/* populate ORC data */
orc = (struct orc_entry *)orc_sec->data->d_buf + idx;
memcpy(orc, o, sizeof(*orc));
- orc->sp_offset = bswap_if_needed(orc->sp_offset);
- orc->bp_offset = bswap_if_needed(orc->bp_offset);
+ orc->sp_offset = bswap_if_needed(elf, orc->sp_offset);
+ orc->bp_offset = bswap_if_needed(elf, orc->bp_offset);
/* populate reloc for ip */
if (elf_add_reloc_to_insn(elf, ip_sec, idx * sizeof(int), R_X86_64_PC32,
diff --git a/tools/objtool/special.c b/tools/objtool/special.c
index e2223dd91c37..9c8d827f69af 100644
--- a/tools/objtool/special.c
+++ b/tools/objtool/special.c
@@ -87,7 +87,8 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry,
if (entry->feature) {
unsigned short feature;
- feature = bswap_if_needed(*(unsigned short *)(sec->data->d_buf +
+ feature = bswap_if_needed(elf,
+ *(unsigned short *)(sec->data->d_buf +
offset +
entry->feature));
arch_handle_alternative(feature, alt);