summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h7
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c7
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c53
3 files changed, 33 insertions, 34 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 29b92f05bb2b..cdba58a3e359 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -212,7 +212,8 @@
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
* @rx_outstanding: current master-rx elements in tx fifo
- * @clk_freq: bus clock frequency
+ * @timings: bus clock frequency, SDA hold and other timings
+ * @sda_hold_time: SDA hold value
* @ss_hcnt: standard speed HCNT value
* @ss_lcnt: standard speed LCNT value
* @fs_hcnt: fast speed HCNT value
@@ -264,10 +265,8 @@ struct dw_i2c_dev {
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
int rx_outstanding;
- u32 clk_freq;
+ struct i2c_timings timings;
u32 sda_hold_time;
- u32 sda_falling_time;
- u32 scl_falling_time;
u16 ss_hcnt;
u16 ss_lcnt;
u16 fs_hcnt;
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index a1717bff06a8..c69b8348cf4c 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -51,6 +51,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
const char *mode_str, *fp_str = "";
u32 comp_param1;
u32 sda_falling_time, scl_falling_time;
+ struct i2c_timings *t = &dev->timings;
int ret;
ret = i2c_dw_acquire_lock(dev);
@@ -60,8 +61,8 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
i2c_dw_release_lock(dev);
/* Set standard and fast speed dividers for high/low periods */
- sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
- scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+ sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
+ scl_falling_time = t->scl_fall_ns ?: 300; /* ns */
/* Calculate SCL timing parameters for standard mode if not set */
if (!dev->ss_hcnt || !dev->ss_lcnt) {
@@ -85,7 +86,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
* difference is the timing parameter values since the registers are
* the same.
*/
- if (dev->clk_freq == 1000000) {
+ if (t->bus_freq_hz == 1000000) {
/*
* Check are fast mode plus parameters available and use
* fast mode if not.
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5660daf6c92e..fc1462601b16 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -96,6 +96,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct i2c_timings *t = &dev->timings;
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
const struct acpi_device_id *id;
@@ -115,7 +116,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
- switch (dev->clk_freq) {
+ switch (t->bus_freq_hz) {
case 100000:
dev->sda_hold_time = ss_ht;
break;
@@ -175,6 +176,8 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
{
+ struct i2c_timings *t = &dev->timings;
+
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
@@ -182,7 +185,7 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
dev->mode = DW_IC_MASTER;
- switch (dev->clk_freq) {
+ switch (t->bus_freq_hz) {
case 100000:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
break;
@@ -240,7 +243,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
- u32 acpi_speed, ht = 0;
+ struct i2c_timings *t;
+ u32 acpi_speed;
struct resource *mem;
int i, irq, ret;
static const int supported_speeds[] = {
@@ -272,18 +276,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
reset_control_deassert(dev->rst);
}
- if (pdata) {
- dev->clk_freq = pdata->i2c_scl_freq;
- } else {
- device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
- &ht);
- device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
- &dev->sda_falling_time);
- device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
- &dev->scl_falling_time);
- device_property_read_u32(&pdev->dev, "clock-frequency",
- &dev->clk_freq);
- }
+ t = &dev->timings;
+ if (pdata)
+ t->bus_freq_hz = pdata->i2c_scl_freq;
+ else
+ i2c_parse_fw_timings(&pdev->dev, t, false);
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
/*
@@ -300,12 +297,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
- if (acpi_speed && dev->clk_freq)
- dev->clk_freq = min(dev->clk_freq, acpi_speed);
- else if (acpi_speed || dev->clk_freq)
- dev->clk_freq = max(dev->clk_freq, acpi_speed);
+ if (acpi_speed && t->bus_freq_hz)
+ t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
+ else if (acpi_speed || t->bus_freq_hz)
+ t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
else
- dev->clk_freq = 400000;
+ t->bus_freq_hz = 400000;
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
@@ -314,11 +311,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
- if (dev->clk_freq != 100000 && dev->clk_freq != 400000
- && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+ if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
+ t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
dev_err(&pdev->dev,
"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
- dev->clk_freq);
+ t->bus_freq_hz);
ret = -EINVAL;
goto exit_reset;
}
@@ -334,12 +331,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_prepare_clk(dev, true)) {
+ u64 clk_khz;
+
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+ clk_khz = dev->get_clk_rate_khz(dev);
- if (!dev->sda_hold_time && ht)
- dev->sda_hold_time = div_u64(
- (u64)dev->get_clk_rate_khz(dev) * ht + 500000,
- 1000000);
+ if (!dev->sda_hold_time && t->sda_hold_ns)
+ dev->sda_hold_time =
+ div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
}
dw_i2c_set_fifo_size(dev, pdev->id);
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-25 22:03:37 +0000