diff options
552 files changed, 23996 insertions, 3627 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 97fb96266344..6423377710ee 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -167,6 +167,7 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: + - bananapi,bpi-m5 - hardkernel,odroid-c4 - hardkernel,odroid-hc4 - khadas,vim3l diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 812ae8cc5959..230b80d9d6cf 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -18,6 +18,7 @@ properties: - description: BCM2711 based Boards items: - enum: + - raspberrypi,400 - raspberrypi,4-model-b - const: brcm,bcm2711 diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index e3c50f231d71..1c827c1954dc 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -197,6 +197,7 @@ properties: - boundary,imx6q-nitrogen6x - compulab,cm-fx6 # CompuLab CM-FX6 - dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board + - ds,imx6q-sbc # Da Sheng COM-9XX Modules - embest,imx6q-marsboard # Embest MarS Board i.MX6Dual - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base @@ -400,6 +401,17 @@ properties: - const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM - const: fsl,imx6dl + - description: i.MX6DL based congatec QMX6 Boards + items: + - enum: + - ge,imx6dl-b105v2 # General Electric B105v2 + - ge,imx6dl-b105pv2 # General Electric B105Pv2 + - ge,imx6dl-b125v2 # General Electric B125v2 + - ge,imx6dl-b125pv2 # General Electric B125Pv2 + - ge,imx6dl-b155v2 # General Electric B155v2 + - const: congatec,qmx6 + - const: fsl,imx6dl + - description: i.MX6DL based DFI FS700-M60-6DL Board items: - const: dfi,fs700-m60-6dl @@ -685,6 +697,7 @@ properties: - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index d72e92bdf7c1..230bffeec0e5 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -17,6 +17,7 @@ properties: - items: - enum: - linksys,nslu2 + - welltech,epbx100 - const: intel,ixp42x - items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index aff57a8c8c30..80a05f6fee85 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -122,6 +122,10 @@ properties: - enum: - mediatek,mt8195-evb - const: mediatek,mt8195 + - description: Google Burnet (HP Chromebook x360 11MK G3 EE) + items: + - const: google,burnet + - const: mediatek,mt8183 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - enum: @@ -133,9 +137,19 @@ properties: items: - const: google,damu - const: mediatek,mt8183 - - description: Google Juniper (Acer Chromebook Spin 311) + - description: Google Fennel (Lenovo IdeaPad 3 Chromebook) + items: + - enum: + - google,fennel-sku0 + - google,fennel-sku1 + - google,fennel-sku6 + - const: google,fennel + - const: mediatek,mt8183 + - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311) items: - - const: google,juniper-sku16 + - enum: + - google,juniper-sku16 + - google,juniper-sku17 - const: google,juniper - const: mediatek,mt8183 - description: Google Kakadu (ASUS Chromebook Detachable CM3) @@ -144,6 +158,10 @@ properties: - const: google,kakadu-rev2 - const: google,kakadu - const: mediatek,mt8183 + - description: Google Kappa (HP Chromebook 11a) + items: + - const: google,kappa + - const: mediatek,mt8183 - description: Google Kodama (Lenovo 10e Chromebook Tablet) items: - enum: @@ -153,6 +171,13 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Willow (Acer Chromebook 311 C722/C722T) + items: + - enum: + - google,willow-sku0 + - google,willow-sku1 + - const: google,willow + - const: mediatek,mt8183 - items: - enum: - mediatek,mt8183-pumpkin diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 9b27e991bddc..9720b00c41d2 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -36,17 +36,20 @@ description: | msm8992 msm8994 msm8996 + sa8155p sc7180 sc7280 sdm630 sdm660 sdm845 sdx55 + sm8150 sm8250 sm8350 The 'board' element must be one of the following strings: + adp cdp cp01-c1 dragonboard @@ -178,6 +181,7 @@ properties: - items: - enum: - qcom,sc7280-idp + - google,senor - const: qcom,sc7280 - items: @@ -200,6 +204,16 @@ properties: - items: - enum: + - qcom,sa8155p-adp + - const: qcom,sa8155p + + - items: + - enum: + - qcom,sm8150-mtp + - const: qcom,sm8150 + + - items: + - enum: - qcom,qrb5165-rb5 - qcom,sm8250-mtp - const: qcom,sm8250 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 5fd0696a9f91..a0cce4e25039 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -302,6 +302,24 @@ properties: - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - const: renesas,r9a06g032 + - description: RZ/G2UL (R9A07G043) + items: + - enum: + - renesas,r9a07g043u11 # RZ/G2UL Type-1 + - renesas,r9a07g043u12 # RZ/G2UL Type-2 + - const: renesas,r9a07g043 + + - description: RZ/G2{L,LC} (R9A07G044) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC + - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC + - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L + - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L + - const: renesas,r9a07g044 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 4a6f772c1043..6546b015fc62 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -600,6 +600,11 @@ properties: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 + - description: Rockchip RK3568 Evaluation board + items: + - const: rockchip,rk3568-evb1-v10 + - const: rockchip,rk3568 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index ac750025a2eb..889128acf49a 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -224,6 +224,12 @@ properties: - const: empire-electronix,m712 - const: allwinner,sun5i-a13 + - description: Forlinx OKA40i-C Development board + items: + - const: forlinx,oka40i-c + - const: forlinx,feta40i-c + - const: allwinner,sun8i-r40 + - description: FriendlyARM NanoPi A64 items: - const: friendlyarm,nanopi-a64 @@ -269,6 +275,11 @@ properties: - const: friendlyarm,nanopi-r1 - const: allwinner,sun8i-h3 + - description: FriendlyARM NanoPi R1S H5 + items: + - const: friendlyarm,nanopi-r1s-h5 + - const: allwinner,sun50i-h5 + - description: FriendlyARM ZeroPi items: - const: friendlyarm,zeropi diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 43fd2f8927d0..0afec83cc723 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -301,6 +301,33 @@ patternProperties: additionalProperties: false + core-domain: + type: object + description: | + The vast majority of hardware blocks of Tegra SoC belong to a + Core power domain, which has a dedicated voltage rail that powers + the blocks. + + properties: + operating-points-v2: + description: + Should contain level, voltages and opp-supported-hw property. + The supported-hw is a bitfield indicating SoC speedo or process + ID mask. + + "#power-domain-cells": + const: 0 + + required: + - operating-points-v2 + - "#power-domain-cells" + + additionalProperties: false + + core-supply: + description: + Phandle to voltage regulator connected to the SoC Core power rail. + required: - compatible - reg @@ -325,6 +352,7 @@ examples: tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra210-pmc"; reg = <0x7000e400 0x400>; + core-supply = <®ulator>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; @@ -338,17 +366,24 @@ examples: nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + powergates { pd_audio: aud { clocks = <&tegra_car TEGRA210_CLK_APE>, <&tegra_car TEGRA210_CLK_APB2APE>; resets = <&tegra_car 198>; + power-domains = <&pd_core>; #power-domain-cells = <0>; }; pd_xusbss: xusba { clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + power-domains = <&pd_core>; #power-domain-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt deleted file mode 100644 index ab730ea0a560..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ /dev/null @@ -1,313 +0,0 @@ -Broadcom iProc Family Clocks - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The iProc clock controller manages clocks that are common to the iProc family. -An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, -LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL -comprises of several leaf clocks - -Required properties for a PLL and its leaf clocks: - -- compatible: - Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on -Cygnus has a compatible string of "brcm,cygnus-genpll" - -- #clock-cells: - Have a value of <1> since there are more than 1 leaf clock of a given PLL - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for the PLL - -- clocks: - The input parent clock phandle for the PLL. For most iProc PLLs, this is an -onboard crystal with a fixed rate - -- clock-output-names: - An ordered list of strings defining the names of the clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - genpll: genpll { - #clock-cells = <1>; - compatible = "brcm,cygnus-genpll"; - reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; - clocks = <&osc>; - clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", - "enet_sw", "audio_125", "can"; - }; - -Required properties for ASIU clocks: - -ASIU clocks are a special case. These clocks are derived directly from the -reference clock of the onboard crystal - -- compatible: - Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU -clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" - -- #clock-cells: - Have a value of <1> since there are more than 1 ASIU clocks - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for ASIU clocks - -- clocks: - The input parent clock phandle for the ASIU clock, i.e., the onboard -crystal - -- clock-output-names: - An ordered list of strings defining the names of the ASIU clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - asiu_clks: asiu_clks { - #clock-cells = <1>; - compatible = "brcm,cygnus-asiu-clk"; - reg = <0x0301d048 0xc>, <0x180aa024 0x4>; - clocks = <&osc>; - clock-output-names = "keypad", "adc/touch", "pwm"; - }; - -Cygnus ------- -PLL and leaf clock compatible strings for Cygnus are: - "brcm,cygnus-armpll" - "brcm,cygnus-genpll" - "brcm,cygnus-lcpll0" - "brcm,cygnus-mipipll" - "brcm,cygnus-asiu-clk" - "brcm,cygnus-audiopll" - -The following table defines the set of PLL/clock index and ID for Cygnus. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-cygnus.h" - - Clock Source (Parent) Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK - adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK - pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK - - genpll crystal 0 BCM_CYGNUS_GENPLL - axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK - 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK - ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK - enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK - audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK - can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK - - lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 - pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK - ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK - sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK - usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK - smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK - ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED - - mipipll crystal 0 BCM_CYGNUS_MIPIPLL - ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED - ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD - ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D - ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED - ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED - ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED - - audiopll crystal 0 BCM_CYGNUS_AUDIOPLL - ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 - ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 - ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 - -Hurricane 2 ------- -PLL and leaf clock compatible strings for Hurricane 2 are: - "brcm,hr2-armpll" - -The following table defines the set of PLL/clock for Hurricane 2: - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - -Northstar and Northstar Plus ------- -PLL and leaf clock compatible strings for Northstar and Northstar Plus are: - "brcm,nsp-armpll" - "brcm,nsp-genpll" - "brcm,nsp-lcpll0" - -The following table defines the set of PLL/clock index and ID for Northstar and -Northstar Plus. These clock IDs are defined in: - "include/dt-bindings/clock/bcm-nsp.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - genpll crystal 0 BCM_NSP_GENPLL - phy genpll 1 BCM_NSP_GENPLL_PHY_CLK - ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK - usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK - iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK - sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK - sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK - - lcpll0 crystal 0 BCM_NSP_LCPLL0 - pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK - sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK - ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK - -Northstar 2 ------------ -PLL and leaf clock compatible strings for Northstar 2 are: - "brcm,ns2-genpll-scr" - "brcm,ns2-genpll-sw" - "brcm,ns2-lcpll-ddr" - "brcm,ns2-lcpll-ports" - -The following table defines the set of PLL/clock index and ID for Northstar 2. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-ns2.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - genpll_scr crystal 0 BCM_NS2_GENPLL_SCR - scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK - fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK - audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK - ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED - ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED - ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED - - genpll_sw crystal 0 BCM_NS2_GENPLL_SW - rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK - 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK - nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK - chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK - port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK - sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK - - lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR - pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK - ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK - ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED - ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED - ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED - ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED - - lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS - wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK - rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK - ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED - ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED - ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED - ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED - -BCM63138 --------- -PLL and leaf clock compatible strings for BCM63138 are: - "brcm,bcm63138-armpll" - -Stingray ------------ -PLL and leaf clock compatible strings for Stingray are: - "brcm,sr-genpll0" - "brcm,sr-genpll1" - "brcm,sr-genpll2" - "brcm,sr-genpll3" - "brcm,sr-genpll4" - "brcm,sr-genpll5" - "brcm,sr-genpll6" - - "brcm,sr-lcpll0" - "brcm,sr-lcpll1" - "brcm,sr-lcpll-pcie" - - -The following table defines the set of PLL/clock index and ID for Stingray. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-sr.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - crmu_ref25m crystal N/A N/A - - genpll0 crystal 0 BCM_SR_GENPLL0 - clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK - clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK - clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK - clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK - clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK - clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK - - genpll1 crystal 0 BCM_SR_GENPLL1 - clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK - clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK - - genpll2 crystal 0 BCM_SR_GENPLL2 - clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK - clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK - clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK - clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK - clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK - clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK - - genpll3 crystal 0 BCM_SR_GENPLL3 - clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK - clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK - - genpll4 crystal 0 BCM_SR_GENPLL4 - clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK - clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK - clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK - clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK - clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK - - genpll5 crystal 0 BCM_SR_GENPLL5 - clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK - clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK - clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK - - genpll6 crystal 0 BCM_SR_GENPLL6 - clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK - - lcpll0 crystal 0 BCM_SR_LCPLL0 - clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK - clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK - clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK - clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK - - lcpll1 crystal 0 BCM_SR_LCPLL1 - clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK - clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK - clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK - - lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE - clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml new file mode 100644 index 000000000000..8dc7b404ee12 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml @@ -0,0 +1,395 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc Family Clocks + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +description: | + The iProc clock controller manages clocks that are common to the iProc family. + An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL, + LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL + comprises of several leaf clocks + + ASIU clocks are a special case. These clocks are derived directly from the + reference clock of the onboard crystal. + +properties: + compatible: + enum: + - brcm,bcm63138-armpll + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + - brcm,hr2-armpll + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + + reg: + minItems: 1 + maxItems: 3 + items: + - description: base register + - description: power register + - description: ASIU or split status register + + clocks: + description: The input parent clock phandle for the PLL / ASIU clock. For + most iProc PLLs, this is an onboard crystal with a fixed rate. + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-output-names: + minItems: 1 + maxItems: 45 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Cygnus. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + ----- --------------- ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + + audiopll crystal 0 BCM_CYGNUS_AUDIOPLL + ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 + ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 + ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 + - if: + properties: + compatible: + contains: + enum: + - brcm,hr2-armpll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar and + Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar 2. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-ns2.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + genpll_scr crystal 0 BCM_NS2_GENPLL_SCR + scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK + fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK + audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK + ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED + ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED + ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED + + genpll_sw crystal 0 BCM_NS2_GENPLL_SW + rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK + 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK + nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK + chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK + port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK + sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK + + lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR + pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK + ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK + ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED + ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED + ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED + ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED + + lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS + wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK + rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK + ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED + ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED + ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED + ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED + - if: + properties: + compatible: + contains: + enum: + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Stingray. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK + clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + genpll5 crystal 0 BCM_SR_GENPLL5 + clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK + clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK + clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK + clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK + - if: + properties: + compatible: + contains: + const: brcm,cygnus-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: axi21 + - const: 250mhz + - const: ihost_sys + - const: enet_sw + - const: audio_125 + - const: can + - if: + properties: + compatible: + contains: + const: brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + items: + - const: lcpll0 + - const: pcie_phy + - const: sdio + - const: ddr_phy + - if: + properties: + compatible: + contains: + const: brcm,nsp-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: phy + - const: ethernetclk + - const: usbclk + - const: iprocfast + - const: sata1 + - const: sata2 + +required: + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false + +examples: + - | + osc1: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll@301d000 { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x301d000 0x2c>, <0x301c020 0x4>; + clocks = <&os1c>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + - | + osc2: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks@301d048 { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc2>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt deleted file mode 100644 index 9acea9d93160..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra114 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra114-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra114-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra114-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA114_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt deleted file mode 100644 index 7f02fb4ca4ad..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ /dev/null @@ -1,107 +0,0 @@ -NVIDIA Tegra124 and Tegra132 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in the header files - <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common - to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h> - (for Tegra124-specific clocks). -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. -- nvidia,external-memory-controller : phandle of the EMC driver. - -The node should contain a "emc-timings" subnode for each supported RAM type (see -field RAM_CODE in register PMC_STRAPPING_OPT_A). - -Required properties for "emc-timings" nodes : -- nvidia,ram-code : Should contain the value of RAM_CODE this timing set - is used for. - -Each "emc-timings" node should contain a "timing" subnode for every supported -EMC clock rate. - -Required properties for "timing" nodes : -- clock-frequency : Should contain the memory clock rate to which this timing -relates. -- nvidia,parent-clock-frequency : Should contain the rate at which the current -parent of the EMC clock should be running at this timing. -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - emc-parent : the clock that should be the parent of the EMC clock at this -timing. - -Example SoC include file: - -/ { - tegra_car: clock@60006000 { - compatible = "nvidia,tegra124-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - nvidia,external-memory-controller = <&emc>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA124_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <112400000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; - - clock@60006000 { - emc-timings-3 { - nvidia,ram-code = <3>; - - timing-12750000 { - clock-frequency = <12750000>; - nvidia,parent-clock-frequency = <408000000>; - clocks = <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "emc-parent"; - }; - timing-20400000 { - clock-frequency = <20400000>; - nvidia,parent-clock-frequency = <408000000>; - clocks = <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "emc-parent"; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml new file mode 100644 index 000000000000..ec7ab1483652 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + const: nvidia,tegra124-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + + nvidia,external-memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the external memory controller node + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that + this timing set is used for + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + external memory clock rate in Hz + minimum: 1000000 + maximum: 1000000000 + + nvidia,parent-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + rate of parent clock in Hz + minimum: 1000000 + maximum: 1000000000 + + clocks: + items: + - description: parent clock of EMC + + clock-names: + items: + - const: emc-parent + + required: + - clock-frequency + - nvidia,parent-clock-frequency + - clocks + - clock-names + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb-controller@c5004000 { + compatible = "nvidia,tegra20-ehci"; + reg = <0xc5004000 0x4000>; + clocks = <&car TEGRA124_CLK_USB2>; + resets = <&car TEGRA124_CLK_USB2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt deleted file mode 100644 index 6c5901b503d0..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra20 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra20-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra20-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra20-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA20_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml new file mode 100644 index 000000000000..459d2a525393 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + enum: + - nvidia,tegra20-car + - nvidia,tegra30-car + - nvidia,tegra114-car + - nvidia,tegra210-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra20-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb-controller@c5004000 { + compatible = "nvidia,tegra20-ehci"; + reg = <0xc5004000 0x4000>; + clocks = <&car TEGRA20_CLK_USB2>; + resets = <&car TEGRA20_CLK_USB2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt deleted file mode 100644 index 26f237f641b7..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt +++ /dev/null @@ -1,56 +0,0 @@ -NVIDIA Tegra210 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra210-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra210-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra210-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA210_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt deleted file mode 100644 index 63618cde12df..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra30 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra30-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra30-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra30-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA30_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 96c914e048f5..2015f50aed0f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -73,7 +73,7 @@ i2c0: i2c@f8034600 { pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; wm8731: wm8731@1a { compatible = "wm8731"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 19c7bd482a51..d3f05d5934d5 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -52,10 +52,11 @@ properties: - description: MAC RX clock - description: For MPU family, used for power mode - description: For MPU family, used for PHY without quartz + - description: PTP clock clock-names: minItems: 3 - maxItems: 5 + maxItems: 6 contains: enum: - stmmaceth @@ -63,6 +64,7 @@ properties: - mac-clk-rx - ethstp - eth-ck + - ptp_ref st,syscon: $ref: "/schemas/types.yaml#/definitions/phandle-array" diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt index 8c60e6985950..5ffd0f55d010 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -42,22 +42,22 @@ Required properties (child nodes): Examples: - cpm_comphy: phy@120000 { + CP11X_LABEL(comphy): phy@120000 { compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; - marvell,system-controller = <&cpm_syscon0>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>; - cpm_comphy0: phy@0 { + CP11X_LABEL(comphy0): phy@0 { reg = <0>; #phy-cells = <1>; }; - cpm_comphy1: phy@1 { + CP11X_LABEL(comphy1): phy@1 { reg = <1>; #phy-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index a96e6dbf1858..eb248f24dce6 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -66,6 +66,16 @@ properties: power-supply: true + resets: + description: | + A number of phandles to resets that need to be asserted during + power-up sequencing of the domain. The resets belong to devices + located inside the power domain, which need to be held in reset + across the power-up sequence. So no means to specify what each + reset is in a generic power-domain binding. + minItems: 1 + maxItems: 4 + required: - '#power-domain-cells' - reg diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml new file mode 100644 index 000000000000..84ddc772b003 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/G2L System Controller (SYSC) performs system control of the LSI and + supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 54a7700df08f..800d511502c4 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -25,6 +25,9 @@ properties: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: + - const: allwinner,sun8i-v3s-pwm + - const: allwinner,sun7i-a20-pwm + - items: - const: allwinner,sun50i-a64-pwm - const: allwinner,sun5i-a13-pwm - items: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index a16e37b01e1d..39b66e9ce3e3 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -20,6 +20,9 @@ properties: - const: allwinner,sun6i-a31-i2s - const: allwinner,sun8i-a83t-i2s - const: allwinner,sun8i-h3-i2s + - items: + - const: allwinner,sun8i-v3-i2s + - const: allwinner,sun8i-h3-i2s - const: allwinner,sun50i-a64-codec-i2s - items: - const: allwinner,sun50i-a64-i2s diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml index 9718358826ab..26eca21e1f0f 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml @@ -12,12 +12,15 @@ maintainers: properties: compatible: - enum: + oneOf: # FIXME: This is documented in the PRCM binding, but needs to be # migrated here at some point # - allwinner,sun8i-a23-codec-analog - - allwinner,sun8i-h3-codec-analog - - allwinner,sun8i-v3s-codec-analog + - const: allwinner,sun8i-h3-codec-analog + - items: + - const: allwinner,sun8i-v3-codec-analog + - const: allwinner,sun8i-h3-codec-analog + - const: allwinner,sun8i-v3s-codec-analog reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 1c7cf32e7ac2..53fd24bdc34e 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -12,11 +12,18 @@ maintainers: properties: compatible: - enum: - - allwinner,sun4i-a10-timer - - allwinner,sun8i-a23-timer - - allwinner,sun8i-v3s-timer - - allwinner,suniv-f1c100s-timer + oneOf: + - enum: + - allwinner,sun4i-a10-timer + - allwinner,sun8i-a23-timer + - allwinner,sun8i-v3s-timer + - allwinner,suniv-f1c100s-timer + - items: + - enum: + - allwinner,sun50i-a64-timer + - allwinner,sun50i-h6-timer + - allwinner,sun50i-h616-timer + - const: allwinner,sun8i-a23-timer reg: maxItems: 1 @@ -34,8 +41,8 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun4i-a10-timer + enum: + - allwinner,sun4i-a10-timer then: properties: @@ -46,8 +53,8 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun8i-a23-timer + enum: + - allwinner,sun8i-a23-timer then: properties: @@ -58,20 +65,9 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun8i-v3s-timer - - then: - properties: - interrupts: - minItems: 3 - maxItems: 3 - - - if: - properties: - compatible: - items: - const: allwinner,suniv-f1c100s-timer + enum: + - allwinner,sun8i-v3s-timer + - allwinner,suniv-f1c100s-timer then: properties: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2bbc27aae977..07fb0d25fc15 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -249,6 +249,8 @@ patternProperties: description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^congatec,.*": + description: congatec GmbH "^coreriver,.*": description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": @@ -315,6 +317,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^ds,.*": + description: DaSheng, Inc. "^dserve,.*": description: dServe Technology B.V. "^dynaimage,.*": @@ -409,6 +413,8 @@ patternProperties: description: Firefly "^focaltech,.*": description: FocalTech Systems Co.,Ltd + "^forlinx,.*": + description: Baoding Forlinx Embedded Technology Co., Ltd. "^frida,.*": description: Shenzhen Frida LCD Co., Ltd. "^friendlyarm,.*": @@ -1252,6 +1258,8 @@ patternProperties: description: Western Digital Corp. "^we,.*": description: Würth Elektronik GmbH. + "^welltech,.*": + description: Welltech Computer Co., Limited. "^wetek,.*": description: WeTek Electronics, limited. "^wexler,.*": diff --git a/MAINTAINERS b/MAINTAINERS index b0a4a8bc8daa..1b012948b7c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1850,6 +1850,7 @@ F: Documentation/devicetree/bindings/arm/gemini.txt F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt +F: arch/arm/boot/dts/gemini* F: arch/arm/mach-gemini/ F: drivers/crypto/gemini/ F: drivers/net/ethernet/cortina/ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f8f09c5066e7..863347b6b65e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ + bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb @@ -240,6 +241,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorcp.dtb dtb-$(CONFIG_ARCH_IXP4XX) += \ intel-ixp42x-linksys-nslu2.dtb \ + intel-ixp42x-welltech-epbx100.dtb \ intel-ixp43x-gateworks-gw2358.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ @@ -513,8 +515,14 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-dms-ba16.dtb \ + imx6q-ds.dtb \ imx6q-emcon-avari.dtb \ imx6q-evi.dtb \ + imx6dl-b105pv2.dtb \ + imx6dl-b105v2.dtb \ + imx6dl-b125v2.dtb \ + imx6dl-b125pv2.dtb \ + imx6dl-b155v2.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ imx6q-gw52xx.dtb \ @@ -725,7 +733,8 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-ts4600.dtb \ - imx28-tx28.dtb + imx28-tx28.dtb \ + imx28-xea.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ ste-nomadik-nhk15.dtb @@ -1234,6 +1243,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-r40-oka40i-c.dtb \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ @@ -1415,6 +1425,7 @@ dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ + aspeed-ast2600-evb-a1.dtb \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 3ea286180382..1103a2cb836f 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -393,10 +393,10 @@ status = "okay"; }; -&gpio0 { +&gpio0_target { ti,no-reset-on-init; }; -&gpio3 { +&gpio3_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 86cad9912906..80116646a3fe 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -101,7 +101,7 @@ }; &gpio3 { - ls_buf_en { + ls-buf-en-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 69acaf4ea0f3..0afcc2ee0b63 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -436,7 +436,7 @@ }; &gpio3 { - ls_buf_en { + ls-buf-en-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 7615327d906a..74db0fc39397 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -101,7 +101,7 @@ }; &gpio1 { - ls_buf_en { + ls-buf-en-hog { gpio-hog; gpios = <29 GPIO_ACTIVE_HIGH>; output-high; @@ -118,7 +118,7 @@ /* an external pulldown on U21 pin 4. */ &gpio3 { - bt_aud_in { + bt-aud-in-hog { gpio-hog; gpios = <16 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 36d963db4026..688e14e82eba 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -333,7 +333,7 @@ status = "okay"; &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; @@ -496,7 +496,7 @@ status = "okay"; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; /* WLS1271 WiFi */ wlcore: wlcore@1 { compatible = "ti,wl1271"; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 902e295b309e..9cf39c93defb 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -495,7 +495,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index d5f8d5e2eb5d..001657be0381 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -510,7 +510,7 @@ &epwmss2 { status = "okay"; - ecap2: ecap@100 { + ecap2: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap2_pins>; @@ -646,7 +646,7 @@ status = "okay"; }; -&gpio0 { +&gpio0_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index e923d065304d..5e598ac96dcc 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -458,14 +458,14 @@ }; &gpio3 { - p4 { + pr1-mii-ctl-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; line-name = "PR1_MII_CTRL"; }; - p10 { + mux-mii-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; /* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */ diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 4e90f9c23d2e..8121a199607c 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -150,7 +150,7 @@ status = "okay"; }; -&gpio0 { +&gpio0_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index 98d8ed4ad967..39e5d2ce600a 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -353,7 +353,7 @@ status = "okay"; }; -&gpio0 { +&gpio0_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index f841afb27844..5403e47c07e2 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -25,10 +25,6 @@ regulator-always-on; }; -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - &mmc2 { vmmc-supply = <&vmmcsd_fixed>; pinctrl-names = "default"; @@ -37,68 +33,6 @@ status = "okay"; }; -&am33xx_pinmux { - nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; - - nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) - >; - }; - - mcasp0_pins: mcasp0-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ - >; - }; - - flash_enable: flash-enable { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ - >; - }; - - imu_interrupt: imu-interrupt { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */ - >; - }; - - ethernet_interrupt: ethernet-interrupt{ - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */ - >; - }; -}; - &lcdc { status = "okay"; @@ -167,10 +101,6 @@ }; }; -&rtc { - system-power-controller; -}; - &mcasp0 { #sound-dai-cells = <0>; pinctrl-names = "default"; @@ -267,6 +197,66 @@ pinctrl-names = "default"; pinctrl-0 = <&clkout2_pin>; + nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + flash_enable: flash-enable { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + >; + }; + + imu_interrupt: imu-interrupt { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + >; + }; + + ethernet_interrupt: ethernet-interrupt{ + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; + user_leds_s0: user-leds-s0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -427,6 +417,7 @@ &mmc1 { status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; bus-width = <0x4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -434,6 +425,7 @@ }; &rtc { + system-power-controller; clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1eaa26533466..2bfe60d32783 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -140,14 +140,14 @@ }; &gpio1 { - hmtc_rst { + hmtc-rst-hog { gpio-hog; gpios = <24 GPIO_ACTIVE_LOW>; output-high; line-name = "homematic_reset"; }; - hmtc_prog { + hmtc-prog-hog { gpio-hog; gpios = <27 GPIO_ACTIVE_LOW>; output-high; @@ -156,14 +156,14 @@ }; &gpio3 { - zgb_rst { + zgb-rst-hog { gpio-hog; gpios = <18 GPIO_ACTIVE_LOW>; output-low; line-name = "zigbee_reset"; }; - zgb_boot { + zgb-boot-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 039a9ab4c7ea..859e760df4c8 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1486,7 +1486,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { + mbox_wkupm3: mbox-wkup-m3 { ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; @@ -1789,7 +1789,7 @@ }; }; - target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ + gpio3_target: target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0xae000 0x4>, <0xae010 0x4>, @@ -1995,15 +1995,12 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap0: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <31>; - interrupt-names = "ecap0"; status = "disabled"; }; @@ -2017,8 +2014,7 @@ }; ehrpwm0: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; @@ -2056,15 +2052,12 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap1: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <47>; - interrupt-names = "ecap1"; status = "disabled"; }; @@ -2078,8 +2071,7 @@ }; ehrpwm1: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; @@ -2117,15 +2109,12 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap2: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <61>; - interrupt-names = "ecap2"; status = "disabled"; }; @@ -2139,8 +2128,7 @@ }; ehrpwm2: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 6e4d05d649e9..e2677682b540 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -786,7 +786,7 @@ pinctrl-0 = <&gpio0_pins>; status = "okay"; - p23 { + sel-emmc-nand-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; /* SelEMMCorNAND selects between eMMC and NAND: @@ -813,13 +813,16 @@ status = "okay"; }; +&gpio5_target { + ti,no-reset-on-init; +}; + &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&display_mux_pins>; status = "okay"; - ti,no-reset-on-init; - p8 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index e217ffc09770..40ef3973f2a9 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -194,7 +194,7 @@ ranges = <0x0 0x9000 0x1000>; uart0: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -712,7 +712,7 @@ ranges = <0x0 0x22000 0x1000>; uart1: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -740,7 +740,7 @@ ranges = <0x0 0x24000 0x1000>; uart2: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1168,7 +1168,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { + mbox_wkupm3: mbox-wkup-m3 { ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; @@ -1399,7 +1399,7 @@ ranges = <0x0 0xa6000 0x1000>; uart3: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1427,7 +1427,7 @@ ranges = <0x0 0xa8000 0x1000>; uart4: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1455,7 +1455,7 @@ ranges = <0x0 0xaa000 0x1000>; uart5: serial@0 { - compatible = "ti,am4372-uart","ti,omap2-uart"; + compatible = "ti,am4372-uart"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1747,10 +1747,9 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -1760,8 +1759,7 @@ ehrpwm0: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; @@ -1799,10 +1797,9 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -1812,8 +1809,7 @@ ehrpwm1: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; @@ -1851,10 +1847,9 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -1864,8 +1859,7 @@ ehrpwm2: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; @@ -1905,8 +1899,7 @@ ehrpwm3: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; @@ -1946,8 +1939,7 @@ ehrpwm4: pwm@48308200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; @@ -1987,8 +1979,7 @@ ehrpwm5: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; @@ -2070,7 +2061,7 @@ }; }; - target-module@22000 { /* 0x48322000, ap 116 64.0 */ + gpio5_target: target-module@22000 { /* 0x48322000, ap 116 64.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x22000 0x4>, <0x22010 0x4>, diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index f517d1e843cf..aae0af10a5b1 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -725,7 +725,7 @@ pinctrl-0 = <&display_mux_pins>; status = "okay"; - p1 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI @@ -860,7 +860,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi0_pins_default>; pinctrl-1 = <&spi0_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &spi1 { @@ -868,7 +868,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_pins_default>; pinctrl-1 = <&spi1_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &usb2_phy1 { diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 0d5fe2bfb683..aed81568a297 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -454,20 +454,20 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { status = "okay"; }; }; @@ -610,12 +610,11 @@ >; }; -&gpio3 { - status = "okay"; +&gpio3_target { ti,no-reset-on-init; }; -&gpio2 { +&gpio2_target { status = "okay"; ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 8bec21ed0de5..583a241f1151 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -13,7 +13,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts new file mode 100644 index 000000000000..dd7148060c4a --- /dev/null +++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2021 IBM Corp. + +#include "aspeed-ast2600-evb.dts" + +/ { + model = "AST2600 A1 EVB"; + + /delete-node/regulator-vcc-sdhci0; + /delete-node/regulator-vcc-sdhci1; + /delete-node/regulator-vccq-sdhci0; + /delete-node/regulator-vccq-sdhci1; +}; + +/delete-node/ &sdc; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 2772796e215e..b7eb552640cb 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "AST2600 EVB"; @@ -21,6 +22,46 @@ device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + vcc_sdhci0: regulator-vcc-sdhci0 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci0: regulator-vccq-sdhci0 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; + + vcc_sdhci1: regulator-vcc-sdhci1 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci1: regulator-vccq-sdhci1 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; }; &mdio0 { @@ -107,7 +148,8 @@ &emmc { non-removable; bus-width = <4>; - max-frequency = <52000000>; + max-frequency = <100000000>; + clk-phase-mmc-hs200 = <9>, <225>; }; &rtc { @@ -121,37 +163,7 @@ m25p,fast-read; label = "bmc"; spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - u-boot@0 { - reg = <0x0 0xe0000>; // 896KB - label = "u-boot"; - }; - - u-boot-env@e0000 { - reg = <0xe0000 0x20000>; // 128KB - label = "u-boot-env"; - }; - - kernel@100000 { - reg = <0x100000 0x900000>; // 9MB - label = "kernel"; - }; - - rofs@a00000 { - reg = <0xa00000 0x2000000>; // 32MB - label = "rofs"; - }; - - rwfs@6000000 { - reg = <0x2a00000 0x1600000>; // 22MB - label = "rwfs"; - }; - }; +#include "openbmc-flash-layout-64.dtsi" }; }; @@ -245,3 +257,46 @@ &uhci { status = "okay"; }; + +&sdc { + status = "okay"; +}; + +/* + * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be + * toggled by GPIO pins. + * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the + * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to + * a 1.8v and a 3.3v power load switch that provides signal voltage to + * sdhci0 bus. + * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled. + * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal + * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled, + * sdhci0 signal voltage becomes 1.8v. + * AST2600-A2 EVB also supports toggling signal voltage for sdhci1. + * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3 + * as power-switch-gpio. + */ +&sdhci0 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci0>; + vqmmc-supply = <&vccq_sdhci0>; + clk-phase-sd-hs = <7>, <200>; +}; + +&sdhci1 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci1>; + vqmmc-supply = <&vccq_sdhci1>; + clk-phase-sd-hs = <7>, <200>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 6aeb47c44eba..79d17841b3d7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -34,7 +34,7 @@ }; chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 8f5ec22e51c2..57b0c45a2298 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -9,7 +9,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { @@ -110,6 +110,30 @@ linux,code = <ASPEED_GPIO(Q, 5)>; }; + psu1_vin_good { + label = "PSU1_VIN_GOOD"; + gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 4)>; + }; + + psu2_vin_good { + label = "PSU2_VIN_GOOD"; + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 5)>; + }; + + psu1_present { + label = "PSU1_PRESENT"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + + psu2_present { + label = "PSU2_PRESENT"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 1)>; + }; + }; gpioA0mux: mux-controller { @@ -280,7 +304,7 @@ m25p,fast-read; label = "bmc"; /* spi-max-frequency = <50000000>; */ -#include "openbmc-flash-layout.dtsi" +#include "openbmc-flash-layout-64.dtsi" }; }; @@ -332,6 +356,16 @@ status = "okay"; }; +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &mac1 { status = "okay"; pinctrl-names = "default"; @@ -426,6 +460,19 @@ status = "okay"; }; +&i2c10 { + status = "okay"; + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + }; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; +}; + &gfx { status = "okay"; memory-region = <&gfx_memory>; @@ -529,8 +576,9 @@ "S1_DDR_SAVE","","", /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", "","", - /*H0-H7*/ "","","","","","","","", - /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", + /*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","", + /*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT", + "","","","","", /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", "","","","", /*K0-K7*/ "","","","","","","","", @@ -540,7 +588,8 @@ /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "","","","","","UID_BUTTON","","", - /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN", + "OCP_MAIN_PWREN","RESET_BUTTON","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts index c2ece0b91885..3395de96ee11 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts index 2c29ac037d32..7c6af7f226e7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index dcab6e78dfa4..33e413ca07e4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -15,7 +15,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts index 5ef88c377358..01dace8f5e5f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -55,7 +55,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 2fb8b147f489..90a3f485c67a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -280,7 +280,7 @@ chosen { stdout-path = &uart1; - bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; + bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon"; }; ast-adc-hwmon { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 7b4b2b126ad8..b6b16356f571 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -37,7 +37,7 @@ }; chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 3295c8c7c05c..d26a9e16ff7c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -202,6 +202,35 @@ linux,code = <12>; }; }; + + leds { + compatible = "gpio-leds"; + + /* RTC battery fault LED at the back */ + led-rtc-battery { + gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>; + }; + + /* BMC Card fault LED at the back */ + led-bmc { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure Identify LED at the back */ + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + led-pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; }; &gpio0 { @@ -214,7 +243,7 @@ /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","", "PIN_HOLE_RESET_OUT_N","","","","", /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","","","","","","","", + /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","", /*I0-I7*/ "","","","","","","","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", @@ -222,7 +251,7 @@ /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", - /*P0-P7*/ "","","","","","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "","","","","","","","", /*R0-R7*/ "","","","","","I2C_FLASH_MICRO_N","","", /*S0-S7*/ "","","","","","","","", @@ -353,10 +382,47 @@ &i2c1 { status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; - pca2: pca9552@61 { + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + pca2: pca9552@65 { compatible = "nxp,pca9552"; - reg = <0x61>; + reg = <0x65>; #address-cells = <1>; #size-cells = <0>; @@ -424,12 +490,222 @@ reg = <9>; type = <PCA955X_TYPE_GPIO>; }; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + pca_cable_card_c01: pca9551@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c01-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c01-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca_cable_card_c02: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c02-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c02-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + }; + + i2c4mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pca_cable_card_c03: pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c03-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c03-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + }; }; +}; + +&i2c5 { + status = "okay"; - pca3: pca9552@62 { + pca3: pca9552@66 { compatible = "nxp,pca9552"; - reg = <0x62>; + reg = <0x66>; #address-cells = <1>; #size-cells = <0>; @@ -512,44 +788,6 @@ }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; - - eeprom@54 { - compatible = "atmel,24c128"; - reg = <0x54>; - }; - - power-supply@68 { - compatible = "ibm,cffps"; - reg = <0x68>; - }; - - power-supply@69 { - compatible = "ibm,cffps"; - reg = <0x69>; - }; - - power-supply@6a { - compatible = "ibm,cffps"; - reg = <0x6a>; - }; - - power-supply@6b { - compatible = "ibm,cffps"; - reg = <0x6b>; - }; -}; - -&i2c4 { - status = "okay"; - i2c-switch@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -558,56 +796,69 @@ status = "okay"; i2c-mux-idle-disconnect; - i2c4mux0chn0: i2c@0 { + i2c5mux0chn0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; - eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - }; - }; - - i2c4mux0chn1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; - }; - i2c4mux0chn2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; - }; - }; -}; + pca_cable_card_c04: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; -&i2c5 { - status = "okay"; + gpio-controller; + #gpio-cells = <2>; - i2c-switch@70 { - compatible = "nxp,pca9546"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - i2c-mux-idle-disconnect; + led@0 { + label = "cablecard-c04-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; - i2c5mux0chn0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; + led@1 { + label = "cablecard-c04-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; }; }; @@ -619,6 +870,62 @@ compatible = "atmel,24c64"; reg = <0x51>; }; + + pca_cable_card_c05: pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c05-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c05-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; i2c5mux0chn2: i2c@2 { @@ -629,6 +936,62 @@ compatible = "atmel,24c64"; reg = <0x52>; }; + + pca_cable_card_c06: pca9551@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c06-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c06-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; i2c5mux0chn3: i2c@3 { @@ -639,6 +1002,62 @@ compatible = "atmel,24c64"; reg = <0x53>; }; + + pca_cable_card_c07: pca9551@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c07-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c07-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; }; }; @@ -659,8 +1078,64 @@ #size-cells = <0>; reg = <0>; eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca_cable_card_c08: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c08-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c08-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; }; }; @@ -672,6 +1147,62 @@ compatible = "atmel,24c64"; reg = <0x52>; }; + + pca_cable_card_c09: pca9551@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c09-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c09-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; i2c6mux0chn2: i2c@2 { @@ -682,6 +1213,62 @@ compatible = "atmel,24c64"; reg = <0x53>; }; + + pca_cable_card_c10: pca9551@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c10-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c10-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; i2c6mux0chn3: i2c@3 { @@ -692,12 +1279,1013 @@ compatible = "atmel,24c64"; reg = <0x51>; }; + + pca_cable_card_c11: pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard-c11-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard-c11-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + }; + }; + + pca_pcie_slot: pca9552@65 { + compatible = "nxp,pca9552"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@1 { + label = "pcieslot-c01"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "pcieslot-c02"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "pcieslot-c03"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcieslot-c04"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "pcieslot-c05"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "pcieslot-c06"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "pcieslot-c07"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "pcieslot-c08"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcieslot-c09"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcieslot-c10"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "pcieslot-c11"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; }; }; }; &i2c7 { status = "okay"; + + pic0_dimm: pca9552@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm8"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm9"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm10"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm11"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm12"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm13"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm14"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm15"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pic1_dimm: pca9552@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm24"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm25"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm26"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm27"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm28"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm29"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm30"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm31"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pic2_dimm: pca9552@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm32"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm33"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm34"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm35"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm36"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm37"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm38"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm39"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm40"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm41"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm42"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm43"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm44"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm45"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm46"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm47"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pic3_dimm: pca9552@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm48"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm49"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm50"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm51"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm52"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm53"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm54"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm55"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm56"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm57"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm58"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm59"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm60"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm61"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm62"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm63"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pic0_vrm_misc: pca9552@34 { + compatible = "ibm,pca9552"; + reg = <0x34>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "planar"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "tpm"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "cpu3-c61"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "cpu0-c14"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "opencapi-connector3"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "opencapi-connector4"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "opencapi-connector5"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@8 { + label = "vrm4"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "vrm5"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "vrm6"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "vrm7"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "vrm12"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "vrm13"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "vrm14"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "vrm15"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pic1_vrm_misc: pca9552@35 { + compatible = "ibm,pca9552"; + reg = <0x35>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "dasd-backplane"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "power-distribution"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "cpu1-c19"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "cpu2-c56"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "opencapi-connector0"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "opencapi-connector1"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "opencapi-connector2"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@8 { + label = "vrm0"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "vrm1"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "vrm2"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "vrm3"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "vrm8"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "vrm9"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "vrm10"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "vrm11"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; &i2c8 { @@ -863,6 +2451,48 @@ compatible = "atmel,24c32"; reg = <0x50>; }; + + pca_oppanel: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "front-sys-id0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "front-check-log0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "front-enc-fault1"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "front-sys-pwron0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; i2c14mux0chn3: i2c@3 { @@ -901,6 +2531,138 @@ }; }; + pca_fan_nvme: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "nvme1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "nvme2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nvme3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "nvme4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "nvme5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "nvme6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "nvme7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "nvme8"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "nvme9"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "fan0"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "fan1"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "fan2"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "fan3"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + pca0: pca9552@61 { compatible = "nxp,pca9552"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts index f7fd3b3c90d0..342546a3c0f5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts @@ -19,33 +19,3 @@ reg = <0x6b>; }; }; - -&fan0 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; - -&fan1 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; - -&fan2 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; - -&fan3 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; - -&fan4 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; - -&fan5 { - tach-pulses = <4>; - /delete-property/ maxim,fan-dual-tach; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 07593897fc9a..1752f3250e44 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts index 80c92e065a10..5a98a19f445e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "earlyprintk"; + bootargs = "earlycon"; }; memory { diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 6e9baf3bba53..d5b7d28cda88 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "earlyprintk"; + bootargs = "earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts index c29e5f4d86ad..8f543cca7c21 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -27,7 +27,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts index 084c455ad4cb..bcc1820f5c07 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts @@ -27,7 +27,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts index 73319917cb74..3ef8358ff764 100644 --- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@40000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index 42b37a204241..c0847636f20b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index 15c1f0ac81dc..a52a289cee85 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -57,7 +57,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts index 8503152faaf0..7d38d121ec6d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts index 91dced7e7849..3d4bdad27c2d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index eb4e93a57ff4..cd660c1ff3f5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@40000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index fd2e014dae75..084f54866f38 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -9,7 +9,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts index d56b5ed09b37..4816486c0c9e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index c1478d2db602..e863ec088970 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -13,7 +13,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200n8"; + bootargs = "console=ttyS4,115200n8 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts index 01074b6e3e03..328ef472c479 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@40000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 85d58a63ae90..230f3584bcab 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -10,7 +10,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 4bcc82046362..7ae4ea0d2931 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -17,7 +17,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 03c161493ffc..61bc74b423cf 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -14,7 +14,7 @@ }; chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts index a68ff0675c28..9605e53f5bbf 100644 --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts @@ -28,7 +28,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=ttyS4,115200 earlycon"; }; memory@40000000 { diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts index bc16ad2b5c80..50f3c6a5c0c8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts +++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts @@ -11,7 +11,7 @@ chosen { stdout-path = &uart5; - bootargs = "earlyprintk"; + bootargs = "earlycon"; }; memory@80000000 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index d733c1f161c1..329eaeef66fb 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -264,6 +264,7 @@ reg-io-width = <4>; clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; resets = <&syscon ASPEED_RESET_CRT1>; + syscon = <&syscon>; status = "disabled"; interrupts = <0x19>; }; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 7028e21bdd98..7e90d713f5e5 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -862,11 +862,21 @@ groups = "SGPM1"; }; + pinctrl_sgpm2_default: sgpm2_default { + function = "SGPM2"; + groups = "SGPM2"; + }; + pinctrl_sgps1_default: sgps1_default { function = "SGPS1"; groups = "SGPS1"; }; + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; + pinctrl_sioonctrl_default: sioonctrl_default { function = "SIOONCTRL"; groups = "SIOONCTRL"; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 0025c88f660c..8ecb7861ce10 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -460,7 +460,7 @@ status = "disabled"; }; - nand: nand@18046000 { + nand_controller: nand-controller@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e8df458aad39..84cda16f68a2 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -179,7 +179,7 @@ status = "disabled"; }; - nand: nand@26000 { + nand_controller: nand-controller@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x26000 0x600>, <0x11b408 0x600>, diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index b4d2cc70afb1..748df7955ae6 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -269,7 +269,7 @@ dma-coherent; }; - nand: nand@26000 { + nand_controller: nand-controller@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, <0x11b408 0x600>, diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 3b4ab947492a..f24bdd0870a5 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -1,11 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2711.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" -#include <dt-bindings/reset/raspberrypi,firmware-reset.h> - / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; model = "Raspberry Pi 4 Model B"; @@ -15,25 +13,12 @@ stdout-path = "serial1:115200n8"; }; - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0>; - }; - - aliases { - emmc2bus = &emmc2bus; - ethernet0 = &genet; - pcie0 = &pcie0; - blconfig = &blconfig; - }; - leds { - act { + led-act { gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; @@ -79,31 +64,15 @@ status = "okay"; }; -&firmware { - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; - - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "BT_ON", - "WL_ON", - "PWR_LED_OFF", - "GLOBAL_RESET", - "VDD_SD_IO_SEL", - "CAM_GPIO", - "SD_PWR_ON", - ""; - status = "okay"; - }; - - reset: reset { - compatible = "raspberrypi,firmware-reset"; - #reset-cells = <1>; - }; +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + ""; }; &gpio { @@ -180,23 +149,13 @@ }; &hdmi0 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; - wifi-2.4ghz-coexistence; status = "okay"; }; &hdmi1 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; - wifi-2.4ghz-coexistence; status = "okay"; }; -&hvs { - clocks = <&firmware_clocks 4>; -}; - &pixelvalve0 { status = "okay"; }; @@ -219,22 +178,6 @@ status = "okay"; }; -&rmem { - /* - * RPi4's co-processor will copy the board's bootloader configuration - * into memory for the OS to consume. It'll also update this node with - * its placement information. - */ - blconfig: nvram@0 { - compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x0 0x0 0x0>; - no-map; - status = "disabled"; - }; -}; - /* SDHCI is used to control the SDIO for wireless */ &sdhci { #address-cells = <1>; @@ -309,10 +252,6 @@ status = "okay"; }; -&vchiq { - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; -}; - &vc4 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts new file mode 100644 index 000000000000..f4d2fc20397c --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-4-b.dts" + +/ { + compatible = "raspberrypi,400", "brcm,bcm2711"; + model = "Raspberry Pi 400"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + leds { + /delete-node/ led-act; + + led-pwr { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "SD_OC_N"; +}; + +&genet_mdio { + clock-frequency = <1950000>; +}; + +&pm { + /delete-property/ system-power-controller; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi new file mode 100644 index 000000000000..ca266c5d9f9b --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" + +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + +/ { + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + emmc2bus = &emmc2bus; + ethernet0 = &genet; + pcie0 = &pcie0; + blconfig = &blconfig; + }; +}; + +&firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + status = "okay"; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 720beec54d61..b8a4096192aa 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -413,7 +413,7 @@ ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; - emmc2: emmc2@7e340000 { + emmc2: mmc@7e340000 { compatible = "brcm,bcm2711-emmc2"; reg = <0x0 0x7e340000 0x100>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; @@ -1087,5 +1087,6 @@ }; &vec { + compatible = "brcm,bcm2711-vec"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 6c8ce39833bf..40b9405f1a8e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -14,11 +14,11 @@ }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 17fdd48346ff..11edb581dbaf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -14,7 +14,7 @@ }; leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index b0355c229cdc..1b435c64bd9c 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -15,11 +15,11 @@ }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 33b3b5c02521..a23c25c00eea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -15,7 +15,7 @@ }; leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2b69957e0113..1b63d6b19750 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -15,7 +15,7 @@ }; leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi index 58059c2ce129..e4e6b6abbfc1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -5,7 +5,7 @@ / { leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index f65448c01e31..33b2b77aa47d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -23,7 +23,7 @@ }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 6dd93c6f4966..6f9b3a908f28 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -18,7 +18,7 @@ }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index d94357b21f7e..87ddcad76083 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -4,7 +4,7 @@ leds { compatible = "gpio-leds"; - act { + led-act { label = "ACT"; default-state = "keep"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 0455a680394a..d8af8eeac7b6 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -15,11 +15,11 @@ }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 28be0332c1c8..77099a7871b0 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -19,11 +19,11 @@ }; leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 37343148643d..61010266ca9a 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -20,11 +20,11 @@ }; leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 054ecaa355c9..dd4a48604097 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -20,7 +20,7 @@ }; leds { - act { + led-act { gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 925cb37c22f0..828a20561b96 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -14,7 +14,7 @@ * Since there is no upstream GPIO driver yet, * remove the incomplete node. */ - /delete-node/ act; + /delete-node/ led-act; }; reg_3v3: fixed-regulator { diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index 20322de2f8bf..e2fd9610e125 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 1409d1b559c1..0ff0e9e25327 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b83a864e2e8b..0f3be55201a5 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -420,7 +420,7 @@ status = "disabled"; }; - sdhci: sdhci@7e300000 { + sdhci: mmc@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 8636600385fd..c81944cd6d0b 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -24,8 +24,8 @@ reg = <0x00000000 0x08000000>; }; - nand: nand@18028000 { - nandcs@0 { + nand_controller: nand-controller@18028000 { + nand@0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index e635a15041dd..a6e2aeb28675 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -25,8 +25,8 @@ <0x88000000 0x08000000>; }; - nand: nand@18028000 { - nandcs@0 { + nand_controller: nand-controller@18028000 { + nand@0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 2a8f7312d1be..6282363313e1 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -11,7 +11,7 @@ &pinctrl { compatible = "brcm,bcm4709-pinmux"; - pinmux_mdio: mdio { + pinmux_mdio: mdio-pins { groups = "mdio_grp"; function = "mdio"; }; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi index 925a7c9ce5b7..be9a00ff752d 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -6,8 +6,8 @@ */ / { - nand@18028000 { - nandcs: nandcs@0 { + nand-controller@18028000 { + nandcs: nand@0 { compatible = "brcm,nandcs"; reg = <0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7db72a2f1020..f92089290ccd 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -458,18 +458,18 @@ function = "spi"; }; - pinmux_i2c: i2c { + pinmux_i2c: i2c-pins { groups = "i2c_grp"; function = "i2c"; }; - pinmux_pwm: pwm { + pinmux_pwm: pwm-pins { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; }; - pinmux_uart1: uart1 { + pinmux_uart1: uart1-pins { groups = "uart1_grp"; function = "uart1"; }; @@ -501,7 +501,7 @@ reg = <0x18004000 0x14>; }; - nand: nand@18028000 { + nand_controller: nand-controller@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; reg-names = "nand", "iproc-idm", "iproc-ext"; @@ -520,27 +520,27 @@ <0x1811b408 0x004>, <0x180293a0 0x01c>; reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_lr_fullness_reached", + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", "spi_lr_session_aborted", "spi_lr_impatient", "spi_lr_session_done", - "spi_lr_overhead", - "mspi_done", - "mspi_halted"; + "spi_lr_overread"; clocks = <&iprocmed>; clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; - spi_nor: spi-nor@0 { + spi_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 9c0325cf9e22..cca49a2e2d62 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -203,7 +203,7 @@ status = "disabled"; }; - nand: nand@2000 { + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 8313b7cad542..f92d2cf85972 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -14,10 +14,10 @@ }; }; -&nand { +&nand_controller { status = "okay"; - nandcs@1 { + nand@1 { compatible = "brcm,nandcs"; reg = <1>; nand-ecc-step-size = <512>; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 58f67c9b830b..5ac2042515b8 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -148,7 +148,7 @@ reg-names = "aon-ctrl", "aon-sram"; }; - nand: nand@3e2800 { + nand_controller: nand-controller@3e2800 { status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index b2d323f4a5ab..a76c74b44bba 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -82,8 +82,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 046c59fb4846..de40bd59a5fa 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -49,8 +49,8 @@ }; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index b4a1392bd5a6..dda3e11b711f 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -60,8 +60,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 3378683321d3..ea3c6b88b313 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -68,8 +68,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 5443fc079e6e..1f73885ec274 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index e1e3c26cef19..b6b9ca8b0972 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index f161ba2e7e5e..ecf426f6ad5d 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -90,8 +90,8 @@ }; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 83cb877d63db..8ca18da981ad 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -78,8 +78,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 4e106ce1384a..9747378db531 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -78,8 +78,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index cda6cc281e18..0f92b773afb8 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -89,8 +89,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index ffbff0014c65..9e984ca0e6df 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -68,8 +68,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 5b177274f182..df5c8ab90627 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -31,10 +31,10 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - nandcs@0 { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-ecc-strength = <4>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 3fd39c479a3c..5475dab8181d 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 7cf31b6e48b7..c3942b4e82ad 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -574,8 +574,7 @@ status = "disabled"; }; ehrpwm0: pwm@300000 { - compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; clocks = <&psc1 17>, <&ehrpwm_tbclk>; @@ -584,8 +583,7 @@ status = "disabled"; }; ehrpwm1: pwm@302000 { - compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; clocks = <&psc1 17>, <&ehrpwm_tbclk>; @@ -593,9 +591,8 @@ power-domains = <&psc1 17>; status = "disabled"; }; - ecap0: ecap@306000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap0: pwm@306000 { + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; clocks = <&psc1 20>; @@ -603,9 +600,8 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap1: ecap@307000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap1: pwm@307000 { + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; clocks = <&psc1 20>; @@ -613,9 +609,8 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap2: ecap@308000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap2: pwm@308000 { + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; clocks = <&psc1 20>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3551a64963f8..a9e7274806f4 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -314,8 +314,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <70>; - dmas = <&edma 58 0 &edma 59 0>; - dma-names = "tx", "rx"; }; i2c2: i2c@4802a000 { @@ -325,8 +323,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <71>; - dmas = <&edma 60 0 &edma 61 0>; - dma-names = "tx", "rx"; }; intc: interrupt-controller@48200000 { @@ -351,7 +347,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <0 0 0>; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 38530dbb89a0..87deb6a76eff 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -319,7 +319,7 @@ }; pcf_lcd: gpio@20 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -330,7 +330,7 @@ }; pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -362,11 +362,11 @@ clock-frequency = <400000>; pcf_hdmi: gpio@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi index a25749a1c365..a5bdc6431d8d 100644 --- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi +++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi @@ -5,17 +5,17 @@ &mailbox5 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { status = "okay"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 648d23f7f748..956a26d52a4c 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1159,7 +1159,7 @@ ranges = <0x0 0x20000 0x1000>; uart3: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -1343,7 +1343,7 @@ }; }; - target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + gpio2_target: target-module@55000 { /* 0x48055000, ap 13 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x55000 0x4>, <0x55010 0x4>, @@ -1376,7 +1376,7 @@ }; }; - target-module@57000 { /* 0x48057000, ap 15 06.0 */ + gpio3_target: target-module@57000 { /* 0x48057000, ap 15 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x57000 0x4>, <0x57010 0x4>, @@ -1562,7 +1562,7 @@ ranges = <0x0 0x66000 0x1000>; uart5: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -1594,7 +1594,7 @@ ranges = <0x0 0x68000 0x1000>; uart6: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -1626,7 +1626,7 @@ ranges = <0x0 0x6a000 0x1000>; uart1: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -1658,7 +1658,7 @@ ranges = <0x0 0x6c000 0x1000>; uart2: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -1690,7 +1690,7 @@ ranges = <0x0 0x6e000 0x1000>; uart4: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -2424,7 +2424,7 @@ ranges = <0x0 0x20000 0x1000>; uart7: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -2454,7 +2454,7 @@ ranges = <0x0 0x22000 0x1000>; uart8: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -2484,7 +2484,7 @@ ranges = <0x0 0x24000 0x1000>; uart9: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; @@ -2561,7 +2561,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -2607,7 +2607,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -2653,7 +2653,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -4508,7 +4508,7 @@ ranges = <0x0 0xb000 0x1000>; uart10: serial@0 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; + compatible = "ti,dra742-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 6d2cca6b4488..a64364443031 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -187,7 +187,7 @@ }; &pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index b65b2dd094d0..f12825268188 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -226,7 +226,7 @@ }; pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -256,7 +256,7 @@ clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; @@ -268,7 +268,7 @@ */ lines-initial-states = <0x0f2b>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f3e934ef7d3e..90617261373c 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -77,12 +77,12 @@ }; &mailbox5 { - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled"; @@ -90,7 +90,7 @@ }; &mailbox6 { - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi index b1147a4b77f9..3256631510c5 100644 --- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi +++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi @@ -6,7 +6,7 @@ #include "dra7-ipu-dsp-common.dtsi" &mailbox6 { - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index b4e07d99ffde..cfb39dde4930 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -145,12 +145,12 @@ }; &mailbox5 { - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled"; @@ -158,12 +158,12 @@ }; &mailbox6 { - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { ti,mbox-tx = <6 2 2>; ti,mbox-rx = <4 2 2>; status = "disabled"; }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { ti,mbox-tx = <5 2 2>; ti,mbox-rx = <1 2 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 9bd01ae40b1d..e2b7fcb061cf 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -158,12 +158,6 @@ regulator-max-microvolt = <1800000>; }; - clk_ov5640_fixed: clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -355,7 +349,7 @@ }; pcf_lcd: pcf8757@20 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -366,7 +360,7 @@ }; pcf_gpio_21: pcf8757@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; gpio-controller; #gpio-cells = <2>; @@ -377,11 +371,11 @@ }; pcf_hdmi: pcf8575@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; @@ -406,27 +400,6 @@ }; }; -&i2c5 { - status = "okay"; - clock-frequency = <400000>; - - ov5640@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - - clocks = <&clk_ov5640_fixed>; - clock-names = "xclk"; - - port { - csi2_cam0: endpoint { - remote-endpoint = <&csi2_phy0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - }; -}; - &cpu0 { vdd-supply = <&buck10_reg>; }; @@ -573,14 +546,6 @@ }; }; -&csi2_0 { - csi2_phy0: endpoint { - remote-endpoint = <&csi2_cam0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; -}; - &ipu2 { status = "okay"; memory-region = <&ipu2_cma_pool>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index c52b9cf4f74c..f6ba5e426040 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -653,7 +653,7 @@ mmc-pwrseq = <&wlan_pwrseq>; brcmf: wifi@1 { - compatible = "brcm,bcm4334-fmac"; + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpx1>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 525ff3d2fac3..55922176807e 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -314,7 +314,8 @@ }; &fimc_1 { - status = "okay"; + /* Back camera not implemented */ + status = "disabled"; assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; assigned-clock-parents = <&clock CLK_SCLK_MPLL>; @@ -330,7 +331,8 @@ }; &fimc_3 { - status = "okay"; + /* Back camera not implemented */ + status = "disabled"; assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; assigned-clock-parents = <&clock CLK_SCLK_MPLL>; @@ -806,7 +808,7 @@ pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; brcmf: wifi@1 { - compatible = "brcm,bcm4330-fmac"; + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpx2>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index d2406c9146b8..3eb8df319246 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -521,7 +521,7 @@ pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; brcmf: wifi@1 { - compatible = "brcm,bcm4330-fmac"; + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpx2>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index dd44ad2c6ad6..f052853244a4 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -614,7 +614,7 @@ pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; brcmf: wifi@1 { - compatible = "brcm,bcm4330-fmac"; + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpx2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 4583d342af39..b3726d4d7d93 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -163,6 +163,7 @@ <1025000>, <950000>, <918750>, <900000>, <875000>, <831250>; + wakeup-source; regulators { ldo1_reg: LDO1 { diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index fc77c1bfd844..968c7943653e 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -668,6 +668,7 @@ interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; + wakeup-source; reg = <0x09>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index c49dbb7847b8..2c792142605c 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -50,8 +50,8 @@ reg = <0x48>; interrupt-parent = <&gpm2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - x-size = <720>; - y-size = <1280>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; avdd-supply = <&ldo23_reg>; vdd-supply = <&ldo24_reg>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 5bd05866d7a3..5b1d4591b35c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -282,6 +282,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e1f6de53e20e..5479ef09f9f3 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -144,6 +144,7 @@ <1200000>, <1200000>, <1200000>, <1200000>, <1200000>, <1200000>; + wakeup-source; s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 9e750890edb8..22c3086e0076 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -325,6 +325,7 @@ interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; + wakeup-source; reg = <0x09>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index a161f6237c7f..a771542e28b8 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -218,6 +218,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s5m8767_irq>; + wakeup-source; vinb1-supply = <&main_dc_reg>; vinb2-supply = <&main_dc_reg>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 949c0721cdb4..884fef55836c 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -190,6 +190,7 @@ pinctrl-names = "default"; pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; #clock-cells = <1>; inl1-supply = <&buck5_reg>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 1aad4859c5f1..dfc7f14f5772 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -352,6 +352,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; + wakeup-source; s2mps11_osc: clocks { compatible = "samsung,s2mps11-clk"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index d506da9fa661..a4f0e3ffedbd 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -132,6 +132,7 @@ pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; + wakeup-source; s2mps11_osc: clocks { compatible = "samsung,s2mps11-clk"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 6d690b1db099..e7958dbecfd2 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -512,6 +512,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; + wakeup-source; s2mps11_osc: clocks { compatible = "samsung,s2mps11-clk"; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index 20c222b33f98..d91f7fa2cf80 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -22,7 +22,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index ede782257643..1c24f9b35973 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -24,7 +24,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi index 2fc3e86dc5f7..982752e1df24 100644 --- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -22,7 +22,7 @@ * Green LED is much brighter than the others * so limit its max brightness */ - max_brightness = <127>; + max-brightness = <127>; linux,default-trigger = "mmc0"; }; @@ -30,7 +30,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index cc39289e99dd..c79a2a02dd6b 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -61,9 +61,9 @@ #size-cells = <0>; /* Collides with IDE pins, that's cool (we do not use them) */ - gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; num-chipselects = <1>; @@ -169,7 +169,7 @@ * The touchpad input is connected to a GPIO bit-banged * I2C bus. */ - gpio-i2c { + i2c { compatible = "i2c-gpio"; /* Collides with ICE */ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -492,8 +492,7 @@ display-controller@6a000000 { status = "okay"; - port@0 { - reg = <0>; + port { display_out: endpoint { remote-endpoint = <&panel_in>; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index c6f3d90e3e90..eba1c94ed7f7 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -82,7 +82,7 @@ /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ - gpio-i2c { + i2c { compatible = "i2c-gpio"; sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -140,7 +140,7 @@ }; }; - mdio0: ethernet-phy { + mdio0: mdio { compatible = "virtual,mdio-gpio"; /* Uses MDC and MDIO */ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 43c45f7e1e0a..13112a8a5dd8 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -62,7 +62,7 @@ }; }; - mdio0: ethernet-phy { + mdio0: mdio { compatible = "virtual,mdio-gpio"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index 9611ddf06792..0ebda4efd9d0 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -56,7 +56,7 @@ }; }; - mdio0: ethernet-phy { + mdio0: mdio { compatible = "virtual,mdio-gpio"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ @@ -125,18 +125,6 @@ }; }; - ethernet@60000000 { - status = "okay"; - - ethernet-port@0 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet-port@1 { - /* Not used in this platform */ - }; - }; - usb@68000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index a0916d3c1059..c78e55fd2562 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -87,9 +87,9 @@ #address-cells = <1>; #size-cells = <0>; /* Check pin collisions */ - gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 0c6e6d35bfaa..1b64cc80b55a 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -72,9 +72,9 @@ #address-cells = <1>; #size-cells = <0>; /* Check pin collisions */ - gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 3a2761dd460f..5602ba8f30f2 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -68,7 +68,7 @@ }; }; - mdio0: ethernet-phy { + mdio0: mdio { compatible = "virtual,mdio-gpio"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 52b4dbc0c072..a4a260c36d75 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -67,7 +67,7 @@ }; }; - mdio0: ethernet-phy { + mdio0: mdio { compatible = "virtual,mdio-gpio"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 065ed10a79fa..cc053af3c347 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -191,7 +191,7 @@ }; rtc@45000000 { - compatible = "cortina,gemini-rtc"; + compatible = "cortina,gemini-rtc", "faraday,ftrtc010"; reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_RTC>; @@ -286,6 +286,7 @@ clock-names = "PCLK", "PCICLK"; pinctrl-names = "default"; pinctrl-0 = <&pci_default_pins>; + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -356,6 +357,14 @@ }; }; + crypto: crypto@62000000 { + compatible = "cortina,sl3516-crypto"; + reg = <0x62000000 0x10000>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_SECURITY>; + clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; + }; + ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; @@ -409,8 +418,6 @@ clock-names = "PCLK", "TVE"; pinctrl-names = "default"; pinctrl-0 = <&tvc_default_pins>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 905900bf3e82..cf48ec14af43 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Hisilicon Ltd. Hi3620 SoC + * HiSilicon Ltd. Hi3620 SoC * - * Copyright (C) 2012-2013 Hisilicon Ltd. + * Copyright (C) 2012-2013 HiSilicon Ltd. * Copyright (C) 2012-2013 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts index 031476304d94..f3faf247cd61 100644 --- a/arch/arm/boot/dts/hip01-ca9x2.dts +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Hisilicon Ltd. HiP01 SoC + * HiSilicon Ltd. HiP01 SoC * - * Copyright (C) 2014 Hisilicon Ltd. + * Copyright (C) 2014 HiSilicon Ltd. * Copyright (C) 2014 Huawei Ltd. * * Author: Wang Long <long.wanglong@huawei.com> diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 2a7963605390..e17f36bd9006 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Hisilicon Ltd. HiP01 SoC + * HiSilicon Ltd. HiP01 SoC * - * Copyright (c) 2014 Hisilicon Ltd. + * Copyright (c) 2014 HiSilicon Ltd. * Copyright (c) 2014 Huawei Ltd. * * Author: Wang Long <long.wanglong@huawei.com> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index bccf5ba3d855..2424cc545c9c 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Hisilicon Ltd. HiP04 SoC + * HiSilicon Ltd. HiP04 SoC * - * Copyright (C) 2013-2014 Hisilicon Ltd. + * Copyright (C) 2013-2014 HiSilicon Ltd. * Copyright (C) 2013-2014 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 22b122d3f514..7758c19038f0 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. - * Copyright (c) 2013-2014 Hisilicon Limited. + * Copyright (c) 2013-2014 HiSilicon Limited. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 97211385dc89..dc991ba2a9fb 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. - * Copyright (c) 2013-2014 Hisilicon Limited. + * Copyright (c) 2013-2014 HiSilicon Limited. */ #include <dt-bindings/clock/hix5hd2-clock.h> diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f984b702efc5..908caf810351 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -563,15 +563,15 @@ #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 +#define MX25_PAD_GPIO_A__GPIO_1_0 0x1f4 0x3f0 0x000 0x00 0x000 #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 -#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000 +#define MX25_PAD_GPIO_B__GPIO_1_1 0x1f8 0x3f4 0x000 0x00 0x000 #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001 #define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001 -#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000 +#define MX25_PAD_GPIO_C__GPIO_1_2 0x1fc 0x3f8 0x000 0x00 0x000 #define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 #define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 #define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 @@ -580,18 +580,18 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 #define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000 -#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 +#define MX25_PAD_GPIO_D__GPIO_1_3 0x200 0x3fc 0x000 0x00 0x000 #define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 #define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001 -#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 +#define MX25_PAD_GPIO_E__GPIO_1_4 0x204 0x400 0x000 0x00 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000 #define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002 -#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000 +#define MX25_PAD_GPIO_F__GPIO_1_5 0x208 0x404 0x000 0x00 0x000 #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000 #define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000 diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644 index 000000000000..bb971e660db8 --- /dev/null +++ b/arch/arm/boot/dts/imx28-lwe.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + aliases { + spi2 = &ssp3; + }; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1"; + }; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + }; + + reg_3v3: regulator-reg-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_5v: regulator-reg-usb-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_fec_3v3: regulator-reg-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&spi3_pins_a { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_3v3>; + non-removable; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0x80000>; + read-only; + }; + + partition@80000 { + label = "env0"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "env1"; + reg = <0x90000 0x10000>; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "swupdate"; + reg = <0x500000 0x800000>; + }; + }; + }; +}; + +&usb0 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_b>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644 index 000000000000..a400c108f66a --- /dev/null +++ b/arch/arm/boot/dts/imx28-xea.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-lwe.dtsi" + +/ { + compatible = "lwn,imx28-xea", "fsl,imx28"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a &hog_pins_tiva>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D02__GPIO_0_2 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_CLE__GPIO_0_27 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_LCD_D00__GPIO_1_0 + MX28_PAD_LCD_D01__GPIO_1_1 + MX28_PAD_LCD_D02__GPIO_1_2 + MX28_PAD_LCD_D03__GPIO_1_3 + MX28_PAD_LCD_D04__GPIO_1_4 + MX28_PAD_LCD_D05__GPIO_1_5 + MX28_PAD_LCD_D06__GPIO_1_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_tiva: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_WRN__GPIO_0_25 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_coding: hog@2 { + reg = <2>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D01__GPIO_0_1 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +®_fec_3v3 { + gpio = <&gpio0 0 0>; +}; + +®_usb_5v { + gpio = <&gpio0 2 0>; +}; + +&spi2_pins_a { + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; +}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 16addb3a2a1b..7d4970417dce 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -206,7 +206,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - lan9221: lan9221@5,0 { + lan9221: ethernet@5,0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lan9221>; compatible = "smsc,lan9221", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 9a2e1fde7128..6208fbb2e741 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -24,7 +24,7 @@ reg = <0xf4000000 0x3ff0000>; ranges; - lan9220@f4000000 { + ethernet@f4000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0xf4000000 0x2000000>; phy-mode = "mii"; diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts new file mode 100644 index 000000000000..411aa72d344b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B105Pv2 +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +/dts-v1/; +#include "imx6dl-b1x5pv2.dtsi" + +/ { + model = "General Electric B105Pv2"; + compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl"; + + panel { + compatible = "auo,g101evn010"; + }; +}; + +&i2c3 { + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_q7_gpio0>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts new file mode 100644 index 000000000000..d011127c635b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b105v2.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B105v2 +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +/dts-v1/; +#include "imx6dl-b1x5v2.dtsi" + +/ { + model = "General Electric B105v2"; + compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl"; + + panel { + compatible = "auo,g101evn010"; + }; +}; + +&i2c3 { + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_q7_gpio0>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts new file mode 100644 index 000000000000..ca840fa84052 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B125Pv2 +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +/dts-v1/; +#include "imx6dl-b1x5pv2.dtsi" + +/ { + model = "General Electric B125Pv2"; + compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl"; + + panel { + compatible = "auo,g121ean01"; + }; +}; + +&i2c3 { + touchscreen@2a { + compatible = "eeti,exc80h60"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_q7_gpio0>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts new file mode 100644 index 000000000000..81e5a9cb8900 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b125v2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B125v2 +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +/dts-v1/; +#include "imx6dl-b1x5v2.dtsi" + +/ { + model = "General Electric B125v2"; + compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl"; + + panel { + compatible = "auo,g121ean01"; + }; +}; + +&i2c3 { + touchscreen@2a { + compatible = "eeti,exc80h60"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_q7_gpio0>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts new file mode 100644 index 000000000000..c861937b30f6 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b155v2.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B155v2 +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +/dts-v1/; +#include "imx6dl-b1x5v2.dtsi" + +/ { + model = "General Electric B155v2"; + compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl"; + + panel { + compatible = "auo,g156xtn01"; + }; +}; + +&i2c3 { + touchscreen@2a { + compatible = "eeti,exc80h84"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_q7_gpio0>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + touchscreen-inverted-x; + touchscreen-inverted-y; + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi new file mode 100644 index 000000000000..ec5b66453156 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B1x5Pv2 +// patient monitor series +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +#include <dt-bindings/input/input.h> +#include "imx6dl-qmx6.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + /* Do not allow frequencies above 800MHz */ + cpus { + cpu@0 { + operating-points = < + /* kHz uV */ + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 792000 1175000 + 396000 1175000 + >; + }; + + cpu@1 { + operating-points = < + /* kHz uV */ + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 792000 1175000 + 396000 1175000 + >; + }; + }; + + reg_syspwr: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "SYS_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + reg_5v_pmc: regulator-5v-pmc { + compatible = "regulator-fixed"; + regulator-name = "5V PMC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_syspwr>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_syspwr>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_syspwr>; + }; + + reg_5v0_audio: regulator-5v0-audio { + compatible = "regulator-fixed"; + regulator-name = "5V0_AUDIO"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * This must be always-on for da7212, which has some not + * properly documented dependencies for it's speaker supply + * pin. The issue manifests as speaker volume being very low. + */ + regulator-always-on; + }; + + + reg_3v3_audio: regulator-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_3v3>; + pinctrl-0 = <&pinctrl_q7_hda_reset>; + pinctrl-names = "default"; + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5_audio: regulator-2v5-audio { + compatible = "regulator-fixed"; + regulator-name = "2V5_AUDIO"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <®_3v3_audio>; + + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "WLAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_sdio_power>; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; + + reg_bl: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "LED_VCC"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_syspwr>; + pinctrl-0 = <&pinctrl_q7_lcd_power>; + pinctrl-names = "default"; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + }; + + usb_power: regulator-usb-power { + compatible = "regulator-fixed"; + regulator-name = "USB POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + }; + + charger: battery-charger { + compatible = "gpio-charger"; /* ti,bq24172 */ + charger-type = "mains"; + gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>; + charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>, + <&tca6424a 12 GPIO_ACTIVE_HIGH>; + charge-current-limit-mapping = <1300000 0x0>, + <700000 0x1>, + <0 0x2>; + charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>; + }; + + poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_spi_cs1>; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + }; + + power-button-key { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_sleep_button>; + + power-button { + label = "power button"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + rotary-encoder-key { + compatible = "gpio-keys"; + + rotary-encoder-press { + label = "rotary-encoder press"; + gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_ENTER>; + linux,can-disable; + }; + }; + + rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>; + rotary-encoder,relative-axis; + rotary-encoder,steps-per-period = <2>; + wakeup-source; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>; + + alarm1 { + label = "alarm:red"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + alarm2 { + label = "alarm:yellow"; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + }; + + alarm3 { + label = "alarm:blue"; + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_backlight_enable>; + power-supply = <®_bl>; + pwms = <&pwm4 0 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <179>; + enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + panel { + backlight = <&backlight>; + power-supply = <®_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = "Speaker", "Ext Spk"; + simple-audio-card,audio-routing = "Ext Spk", "LINE"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +}; + +&audmux { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + battery: battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>; + sbs,i2c-retry-count = <5>; + power-supplies = <&charger>; + }; + + codec: audio-codec@1a { + compatible = "dlg,da7212"; + reg = <0x1a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_2v5_audio>; + VDDSP-supply = <®_5v0_audio>; + VDDMIC-supply = <®_3v3_audio>; + VDDIO-supply = <®_3v3_audio>; + clocks = <&clk_ext_audio_codec>; + clock-names = "mclk"; + }; +}; + +&i2c5 { + tca6424a: gpio-controller@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio6>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN", + "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF", + "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0", + "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "", + "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", + "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2"; + + }; + + tmp75: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + vs-supply = <®_3v3>; + interrupt-parent = <&tca6424a>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm4 { + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <&usb_power>; + disable-over-current; + dr_mode = "host"; + status = "okay"; + + /* + * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N. + * On QMX6 this is not connceted to the i.MX6, but to the USB Hub + * from &usbh1. This means, that we cannot easily detect and handle + * over-current events. Fortunately the regulator limits the current + * automatically, so the hardware is still protected. + */ +}; + +&usdhc4 { + /* WiFi module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + vmmc-supply = <®_wlan>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio7>; + + interrupt-parent = <&gpio4>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi new file mode 100644 index 000000000000..a326a331508e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B1x5v2 +// patient monitor series +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +#include <dt-bindings/input/input.h> +#include "imx6dl-b1x5pv2.dtsi" + +/ { + reg_3v3_acm: regulator-3v3-acm { + compatible = "regulator-fixed"; + regulator-name = "3V3 ACM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_3v3>; + }; +}; + +&i2c1 { + tca6416: gpio-controller@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3v3_acm>; + gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2", + "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1", + "ACM2_CL2", "", "", "", + "", "", "", ""; + + /* + * The interrupt pin is connected to &tca6424a pin 1, but the Linux + * TCA6424 driver cannot handle low type interrupts at the moment + * (and support cannot be added without some ugly hacks). Since this + * controller does not have any input type GPIOs, just pretend + * that the interrupt pin is unconnected. + */ + }; +}; + +&i2c5 { + mpl3115a2: pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + vcc-supply = <®_3v3_acm>; + + /* + * The MPL3115 interrupts are connected to pin 22 and 23 + * of &tca6424a, but the binding does not yet support + * interrupts. + */ + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index 4d0d3d3386af..60fe5f14666e 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -138,8 +138,6 @@ interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; touchscreen-max-pressure = <4095>; @@ -147,7 +145,9 @@ ti,vref-delay-usecs = /bits/ 16 <100>; ti,x-plate-ohms = /bits/ 16 <800>; ti,y-plate-ohms = /bits/ 16 <300>; - + ti,debounce-max = /bits/ 16 <3>; + ti,debounce-tol = /bits/ 16 <70>; + ti,debounce-rep = /bits/ 16 <3>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index ae6da241f13e..190d26642bc8 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -21,14 +21,11 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 500000>; + pwms = <&pwm1 0 500000 0>; brightness-levels = <0 20 81 248 1000>; default-brightness-level = <20>; num-interpolated-steps = <21>; power-supply = <®_bl_12v0>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; keys { @@ -223,6 +220,24 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; + pinctrl-0 = <&pinctrl_tsc>; + pinctrl-names ="default"; + spi-max-frequency = <100000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + touchscreen-max-pressure = <4095>; + ti,vref-delay-usecs = /bits/ 16 <100>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + ti,debounce-max = /bits/ 16 <3>; + ti,debounce-tol = /bits/ 16 <70>; + ti,debounce-rep = /bits/ 16 <3>; + wakeup-source; + }; }; &i2c1 { @@ -261,7 +276,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -276,8 +290,6 @@ }; &ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; status = "okay"; }; @@ -285,10 +297,6 @@ status = "disabled"; }; -&vpu { - status = "disabled"; -}; - &iomuxc { pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -300,12 +308,6 @@ >; }; - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - pinctrl_can1phy: can1phy { fsl,pins = < /* CAN1_SR */ diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi new file mode 100644 index 000000000000..150d69858255 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi @@ -0,0 +1,612 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for i.MX6DL based congatec QMX6 +// System on Module +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora +// Copyright 2016 congatec AG + +#include "imx6dl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + + i2c5: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c6: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + audmux_ssi1 { + fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) | + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6) + >; + }; + + audmux_aud6 { + fsl,audmux-port = <MX51_AUDMUX_PORT6>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; +}; + +&clks { + clocks = <&rtc_sqw>; + clock-names = "ckil"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf032b", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "bootloader"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "user"; + reg = <0x0100000 0x2fc000>; + }; + + partition@3fc000 { + label = "reserved"; + reg = <0x03fc000 0x4000>; + read-only; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + fsl,magic-packet; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@6 { + reg = <6>; + qca,clk-out-frequency = <125000000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + rtc: m41t62@68 { + compatible = "st,m41t62"; + reg = <0x68>; + + rtc_sqw: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&i2c6 { + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* + * keep VGEN3, VGEN4 and VGEN5 enabled in order to + * maintain backward compatibility with hw-rev. A.0 + */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* supply voltage for eMMC */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&pcie { + reset-gpio = <&gpio1 20 0>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_pu { + vin-supply = <&sw1c_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */ + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; +}; + +&usdhc2 { + /* MicroSD card slot */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + /* eMMC module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + bus-width = <8>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + qmx6mux: imx6qdl-qmx6 { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */ + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x30b0 /* Q7[59] HDA_SYNC */ + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x30b0 /* Q7[65] HDA_SDI */ + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x30b0 /* Q7[63] HDA_BITCLK */ + >; + }; + + /* PHY is on System on Module, Q7[3-15] have Ethernet lines */ + pinctrl_enet: enet { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */ + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */ + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */ + >; + }; + + pinctrl_i2c1: i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */ + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */ + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */ + >; + }; + + pinctrl_i2c2: i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */ + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */ + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */ + >; + }; + + pinctrl_i2c3: i2c3 { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */ + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */ + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */ + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */ + >; + }; + + pinctrl_phy_reset: phy-reset { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* RGMII Phy Reset */ + >; + }; + + pinctrl_pwm4: pwm4 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */ + >; + }; + + pinctrl_q7_backlight_enable: q7-backlight-enable { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */ + >; + }; + + pinctrl_q7_gpio0: q7-gpio0 { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */ + >; + }; + + pinctrl_q7_gpio1: q7-gpio1 { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */ + >; + }; + + pinctrl_q7_gpio2: q7-gpio2 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */ + >; + }; + + pinctrl_q7_gpio3: q7-gpio3 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */ + >; + }; + + pinctrl_q7_gpio4: q7-gpio4 { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */ + >; + }; + + pinctrl_q7_gpio5: q7-gpio5 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */ + >; + }; + + pinctrl_q7_gpio6: q7-gpio6 { + fsl,pins = < + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */ + >; + }; + + pinctrl_q7_gpio7: q7-gpio7 { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */ + >; + }; + + pinctrl_q7_hda_reset: q7-hda-reset { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */ + >; + }; + + pinctrl_q7_lcd_power: lcd-power { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */ + >; + }; + + pinctrl_q7_sdio_power: q7-sdio-power { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */ + >; + }; + + pinctrl_q7_sleep_button: q7-sleep-button { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */ + >; + }; + + pinctrl_q7_spi_cs1: spi-cs1 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */ + >; + }; + + /* SPI1 bus does not leave System on Module */ + pinctrl_spi1: spi1 { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + /* Debug connector on Q7 module */ + pinctrl_uart2: uart2 { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3 { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */ + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */ + >; + }; + + pinctrl_usbotg: usbotg { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */ + >; + }; + + /* µSD card slot on Q7 module */ + pinctrl_usdhc2: usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */ + >; + }; + + /* eMMC module on Q7 module */ + pinctrl_usdhc3: usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */ + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */ + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */ + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */ + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */ + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */ + >; + }; + + pinctrl_wdog: wdog { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 /* Watchdog output signal */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 065d3ab0f50a..e7d9bfbfd0e4 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -106,6 +106,8 @@ reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <1000>; + qca,smarteee-tw-us-1g = <24>; + qca,clk-out-frequency = <125000000>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 9148a01ed6d9..cb8b539eb29d 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -11,6 +11,8 @@ aliases: aliases { ethernet1 = ð1; ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; }; backlight: backlight { @@ -345,6 +347,7 @@ solomon,height = <64>; solomon,width = <128>; solomon,page-offset = <0>; + solomon,col-offset = <4>; solomon,prechargep2 = <15>; reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; vbat-supply = <&sw2_reg>; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index d0768ae429fa..4bf51f3ce003 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -12,10 +12,20 @@ / { aliases { + i2c0 = &i2c2; + i2c1 = &i2c1; + i2c2 = &i2c3; mmc0 = &usdhc2; mmc1 = &usdhc3; mmc2 = &usdhc4; mmc3 = &usdhc1; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + serial0 = &uart1; + serial1 = &uart5; + serial2 = &uart4; + serial3 = &uart2; + serial4 = &uart3; }; memory@10000000 { @@ -23,6 +33,19 @@ reg = <0x10000000 0x40000000>; }; + reg_eth_vio: regulator-eth-vio { + compatible = "regulator-fixed"; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_enet_vio>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "eth_vio"; + vin-supply = <&sw2_reg>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -96,30 +119,40 @@ reg = <0>; max-speed = <100>; reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - reset-post-delay-us = <1000>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ }; }; }; &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ltc3676: pmic@3c { @@ -203,7 +236,7 @@ pagesize = <16>; }; - rtc@56 { + rtc_i2c: rtc@56 { compatible = "microcrystal,rv3029"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc_hw300>; @@ -260,6 +293,11 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1 + >; + }; + + pinctrl_enet_vio: enet-vio-grp { + fsl,pins = < MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0 >; }; @@ -285,6 +323,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2-grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -292,6 +337,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3-grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -299,6 +351,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_pmic_hw300: pmic-hw300-grp { fsl,pins = < MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0 diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index fa2307d8ce86..c713ac03b3b9 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -112,7 +112,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/imx6q-ds.dts new file mode 100644 index 000000000000..b0a63a133977 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ds.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2021 Dillon Min <dillon.minfei@gmail.com> +// +// Based on imx6qdl-sabresd.dtsi which is: +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-ds.dtsi" + +/ { + model = "DaSheng i.MX6 Quad Com-9xx Board"; + compatible = "ds,imx6q-sbc", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/imx6qdl-ds.dtsi new file mode 100644 index 000000000000..f7e517555697 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-ds.dtsi @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2021 Dillon Min <dillon.minfei@gmail.com> +// +// Based on imx6qdl-sabresd.dtsi which is: +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. + +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov2659_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>; + status = "okay"; + + m25p80: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&phy>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + reg = <1>; + qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ov2659: camera@30 { + compatible = "ovti,ov2659"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2659>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xvclk"; + reg = <0x30>; + powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + status = "okay"; + + port { + ov2659_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + link-frequencies = /bits/ 64 <70000000>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + >; + }; + + pinctrl_ecspi1_gpio: ecspi1grpgpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_ov2659: ov2659grp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1grpgpiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 + >; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + bus-width = <4>; + cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 7bd658b7bdda..f3236204cb5a 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -322,8 +322,8 @@ fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 >; }; @@ -410,6 +410,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f824c9abd11a..0c0105468a2f 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -97,8 +97,11 @@ compatible = "fsl,imx6q-sabresd-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; ssi-controller = <&ssi2>; audio-codec = <&codec>; + audio-asrc = <&asrc>; audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", @@ -545,6 +548,13 @@ >; }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index eb25d21a2ace..b9e305774fed 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -40,6 +40,27 @@ }; }; + counter-0 { + compatible = "interrupt-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_counter0>; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + counter-1 { + compatible = "interrupt-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_counter1>; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + counter-2 { + compatible = "interrupt-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_counter2>; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -254,7 +275,7 @@ &gpio2 { gpio-line-names = - "", "", "", "", "", "", "", "", + "count0", "count1", "count2", "", "", "", "", "", "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", "", "", "", "", "", "", "", "ON_SWITCH", @@ -572,6 +593,24 @@ >; }; + pinctrl_counter0: counter0grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b000 + >; + }; + + pinctrl_counter1: counter1grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b000 + >; + }; + + pinctrl_counter2: counter2grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b000 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index b9b698f72b26..bf86b639fdac 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -142,7 +142,6 @@ imx6qdl-wandboard { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 5a1e10def6ef..779cc536566d 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -60,38 +60,26 @@ gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "mx6ul-wm8960"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Line", "Line In", - "Line", "Line Out", - "Speaker", "Speaker", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = + sound-wm8960 { + compatible = "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai2>; + audio-codec = <&codec>; + audio-asrc = <&asrc>; + hp-det-gpio = <&gpio5 4 0>; + audio-routing = "Headphone Jack", "HP_L", "Headphone Jack", "HP_R", - "Speaker", "SPK_LP", - "Speaker", "SPK_LN", - "Speaker", "SPK_RP", - "Speaker", "SPK_RN", - "LINPUT1", "Mic Jack", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT2", "Mic Jack", "LINPUT3", "Mic Jack", - "RINPUT1", "Mic Jack", - "RINPUT2", "Mic Jack"; - - simple-audio-card,cpu { - sound-dai = <&sai2>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clks IMX6UL_CLK_SAI2>; - }; + "RINPUT1", "AMIC", + "RINPUT2", "AMIC", + "Mic Jack", "MICB", + "AMIC", "MICB"; }; spi4 { @@ -145,6 +133,10 @@ compatible = "wlf,wm8960"; reg = <0x1a>; wlf,shared-lrclk; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + clocks = <&clks IMX6UL_CLK_SAI2>; + clock-names = "mclk"; }; camera@3c { diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index ac0751bc1177..4a0d83784d7d 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -164,6 +164,13 @@ "LINPUT1", "AMIC", "AMIC", "MICB"; }; + + sound-hdmi { + compatible = "fsl,imx-audio-sii902x"; + model = "sii902x-audio"; + audio-cpu = <&sai3>; + hdmi-out; + }; }; &adc1 { diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 8fcd95805ff4..5b8dcc19deee 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -90,20 +90,71 @@ timeout-ms = <5000>; }; - /* The first 16MB region on the expansion bus */ - flash@50000000 { - compatible = "intel,ixp4xx-flash", "cfi-flash"; - bank-width = <2>; - /* - * 8 MB of Flash in 0x20000 byte blocks - * mapped in at 0x50000000 - */ - reg = <0x50000000 0x800000>; - - partitions { - compatible = "redboot-fis"; - /* Eraseblock at 0x7e0000 */ - fis-index-block = <0x3f>; + gpio-beeper { + compatible = "gpio-beeper"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + soc { + bus@50000000 { + /* The first 16MB region at CS0 on the expansion bus */ + flash@0 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 0x20000 byte blocks + * mapped in at CS0. + */ + reg = <0x00000000 0x800000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; + }; + }; + }; + + pci@c0000000 { + status = "ok"; + + /* + * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant + * We have slots (IDSEL) 1, 2 and 3. + */ + interrupt-map = + /* IDSEL 1 */ + <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */ + <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */ + <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */ + <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */ + /* IDSEL 2 */ + <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */ + <0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */ + <0x1000 0 0 4 &gpio0 8 3>, /* INT D on slot 2 is irq 8 */ + /* IDSEL 3 */ + <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */ + <0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */ + <0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */ + <0x1800 0 0 4 &gpio0 8 3>; /* INT D on slot 3 is irq 8 */ + }; + + ethernet@c8009000 { + status = "ok"; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts new file mode 100644 index 000000000000..84158503be2a --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + */ + +/dts-v1/; + +#include "intel-ixp42x.dtsi" + +/ { + model = "Welltech EPBX100"; + compatible = "welltech,epbx100", "intel,ixp42x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 16 MB of Flash + */ + reg = <0x50000000 0x1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "zImage"; + reg = <0x00080000 0x00100000>; + read-only; + }; + partition@180000 { + label = "ramdisk"; + reg = <0x00180000 0x00300000>; + read-only; + }; + partition@480000 { + label = "User"; + reg = <0x00480000 0x00b60000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x001f000>; + read-only; + }; + partition@fff000 { + label = "RedBoot config"; + reg = <0x00fff000 0x0001000>; + read-only; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi index a9622ca850cc..5fa063ed396c 100644 --- a/arch/arm/boot/dts/intel-ixp42x.dtsi +++ b/arch/arm/boot/dts/intel-ixp42x.dtsi @@ -7,6 +7,10 @@ / { soc { + pci@c0000000 { + compatible = "intel,ixp42x-pci"; + }; + interrupt-controller@c8003000 { compatible = "intel,ixp42x-interrupt"; }; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index ba1163a1e1e7..60a1228a970f 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -76,19 +76,97 @@ }; }; - flash@50000000 { - compatible = "intel,ixp4xx-flash", "cfi-flash"; - bank-width = <2>; - /* - * 32 MB of Flash in 0x20000 byte blocks - * mapped in at 0x50000000 - */ - reg = <0x50000000 0x2000000>; - - partitions { - compatible = "redboot-fis"; - /* Eraseblock at 0x1fe0000 */ - fis-index-block = <0xff>; + soc { + bus@50000000 { + flash@0 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 32 MB of Flash in 0x20000 byte blocks + * mapped in at CS0. + */ + reg = <0x00000000 0x2000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x1fe0000 */ + fis-index-block = <0xff>; + }; + }; + }; + + pci@c0000000 { + status = "ok"; + + /* + * In the boardfile for the Cambria from OpenWRT the interrupts + * are assigned one per IDSEL, so all 4 interrupts from IDSEL + * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2 + * connected to IRQ 10 etc. I find this highly unlikely so I + * have instead assumed that they are rotated (swizzled) like + * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc. + */ + interrupt-map = + /* IDSEL 1 */ + <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */ + <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */ + <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */ + <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */ + /* IDSEL 2 */ + <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */ + <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */ + <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */ + /* IDSEL 3 */ + <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */ + <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */ + <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */ + <0x1800 0 0 4 &gpio0 10 3>, /* INT D on slot 3 is irq 10 */ + /* IDSEL 4 */ + <0x2000 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */ + <0x2000 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */ + <0x2000 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */ + <0x2000 0 0 4 &gpio0 9 3>, /* INT D on slot 3 is irq 9 */ + /* IDSEL 6 */ + <0x3000 0 0 1 &gpio0 10 3>, /* INT A on slot 3 is irq 10 */ + <0x3000 0 0 2 &gpio0 9 3>, /* INT B on slot 3 is irq 9 */ + <0x3000 0 0 3 &gpio0 8 3>, /* INT C on slot 3 is irq 8 */ + <0x3000 0 0 4 &gpio0 11 3>, /* INT D on slot 3 is irq 11 */ + /* IDSEL 15 */ + <0x7800 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */ + <0x7800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */ + <0x7800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */ + <0x7800 0 0 4 &gpio0 9 3>; /* INT D on slot 3 is irq 9 */ + }; + + ethernet@c800a000 { + status = "ok"; + queue-rx = <&qmgr 4>; + queue-txready = <&qmgr 21>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + }; + }; + }; + + ethernet@c800c000 { + status = "ok"; + queue-rx = <&qmgr 2>; + queue-txready = <&qmgr 19>; + phy-mode = "rgmii"; + phy-handle = <&phy2>; + intel,npe-handle = <&npe 0>; }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi index 494fb2ff57a0..1d0817c6e3f9 100644 --- a/arch/arm/boot/dts/intel-ixp43x.dtsi +++ b/arch/arm/boot/dts/intel-ixp43x.dtsi @@ -8,6 +8,10 @@ / { soc { + pci@c0000000 { + compatible = "intel,ixp43x-pci"; + }; + interrupt-controller@c8003000 { compatible = "intel,ixp43x-interrupt"; }; diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi index f8cd506659dc..cce49e809043 100644 --- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -30,5 +30,38 @@ interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + /* This is known as EthB1 */ + ethernet@c800d000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800d000 0x1000>; + status = "disabled"; + intel,npe = <1>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB2 */ + ethernet@c800e000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800e000 0x1000>; + status = "disabled"; + intel,npe = <2>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB3 */ + ethernet@c800f000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800f000 0x1000>; + status = "disabled"; + intel,npe = <3>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi index d4a09584f417..a50427ad05e7 100644 --- a/arch/arm/boot/dts/intel-ixp4xx.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -14,12 +14,61 @@ compatible = "simple-bus"; interrupt-parent = <&intcon>; + /* + * The IXP4xx expansion bus is a set of 16 or 32MB + * windows in the 256MB space from 0x50000000 to + * 0x5fffffff. + */ + bus@50000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x50000000 0x10000000>; + dma-ranges = <0x00000000 0x50000000 0x10000000>; + }; + qmgr: queue-manager@60000000 { compatible = "intel,ixp4xx-ahb-queue-manager"; reg = <0x60000000 0x4000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; }; + pci@c0000000 { + /* compatible filled in by per-soc device tree */ + reg = <0xc0000000 0x1000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, + <9 IRQ_TYPE_LEVEL_HIGH>, + <10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + status = "disabled"; + + ranges = + /* + * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff + * done in 4 chunks of 16MB each. + */ + <0x02000000 0 0x48000000 0x48000000 0 0x04000000>, + /* 64KB I/O space at 0x4c000000 */ + <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>; + + /* + * This needs to map to the start of physical memory so + * PCI devices can see all (hopefully) memory. This is done + * using 4 1:1 16MB windows, so the RAM should not be more than + * 64 MB for this to work. If your memory is anywhere else + * than at 0x0 you need to alter this. + */ + dma-ranges = + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + /* Each unique DTS using PCI must specify the swizzling */ + }; + uart0: serial@c8000000 { compatible = "intel,xscale-uart"; reg = <0xc8000000 0x1000>; @@ -61,9 +110,50 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; }; - npe@c8006000 { + npe: npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + + /* NPE-C contains a crypto accelerator */ + crypto { + compatible = "intel,ixp4xx-crypto"; + intel,npe-handle = <&npe 2>; + queue-rx = <&qmgr 30>; + queue-txready = <&qmgr 29>; + }; + }; + + /* This is known as EthB */ + ethernet@c8009000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc8009000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + intel,npe-handle = <&npe 1>; + }; + + /* This is known as EthC */ + ethernet@c800a000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800a000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + intel,npe-handle = <&npe 2>; + }; + + /* This is known as EthA */ + ethernet@c800c000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800c000 0x1000>; + status = "disabled"; + intel,npe = <0>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 14e26a4fd62a..d800f26b6275 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -544,20 +544,15 @@ }; }; -&k2g_clks { - /* on the board 22.5792MHz is connected to AUDOSC_IN */ - assigned-clocks = <&k2g_clks 0x4c 2>; - assigned-clock-rates = <22579200>; -}; - &mcasp2 { #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp2_pins>; - assigned-clocks = <&k2g_clks 0x6 1>; - assigned-clock-parents = <&k2g_clks 0x6 2>; + assigned-clocks = <&k2g_clks 0x4c 2>, <&k2g_clks 0x6 1>; + assigned-clock-parents = <0>, <&k2g_clks 0x6 2>; + assigned-clock-rates = <22579200>, <0>; status = "okay"; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 05a75019275e..37198294f4b2 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -242,7 +242,7 @@ status = "disabled"; }; - msgmgr: msgmgr@2a00000 { + msgmgr: mailbox@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", @@ -254,7 +254,7 @@ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; }; - pmmc: pmmc@2921c00 { + pmmc: system-controller@2921c00 { compatible = "ti,k2g-sci"; /* * In case of rare platforms that does not use k2g as @@ -272,7 +272,7 @@ #power-domain-cells = <1>; }; - k2g_clks: clocks { + k2g_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8bae6ed0abb2..bd0e864964e9 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -50,6 +50,7 @@ compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + fifo-size = <128>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index 075d583d6f40..2273295e140f 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -60,6 +60,14 @@ clock-frequency = <32768>; status = "disabled"; }; + + xtal_div2: xtal_div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&xtal>; + clock-div = <2>; + clock-mult = <1>; + }; }; soc: soc { @@ -101,6 +109,12 @@ mask = <0x79>; }; + watchdog@6000 { + compatible = "mstar,msc313e-wdt"; + reg = <0x6000 0x1f>; + clocks = <&xtal_div2>; + }; + intc_fiq: interrupt-controller@201310 { compatible = "mstar,mst-intc"; reg = <0x201310 0x40>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f9c2a9938898..5750ca1233cc 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -120,8 +120,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <56>; - dmas = <&sdma 27 &sdma 28>; - dma-names = "tx", "rx"; }; i2c2: i2c@48072000 { @@ -131,8 +129,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <57>; - dmas = <&sdma 29 &sdma 30>; - dma-names = "tx", "rx"; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 494bf6972005..bb529a2a295d 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -192,16 +192,15 @@ compatible = "ti,omap2-mailbox"; reg = <0x48094000 0x200>; interrupts = <26>, <34>; - interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; - mbox_dsp: dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; - mbox_iva: iva { + mbox_iva: mbox-iva { ti,mbox-tx = <2 1 3>; ti,mbox-rx = <3 1 3>; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index d19d8ba3b607..23115ba61bc0 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -284,7 +284,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; - mbox_dsp: dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi index b4109f48ec18..e6ba30a21166 100644 --- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -195,7 +195,7 @@ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. */ &gpio2 { - en_usb2_port { + en-usb2-port-hog { gpio-hog; gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ output-low; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index fd84bbf3b9cc..9ce8d81250aa 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -37,7 +37,7 @@ }; &gpio5 { - irda_en { + irda-en-hog { gpio-hog; gpios = <(175-160) GPIO_ACTIVE_HIGH>; output-high; /* activate gpio_175 to disable IrDA receiver */ diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index c5b9da0d7e6c..64b7e6fddd1b 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -403,8 +403,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48070000 0x80>; interrupts = <56>; - dmas = <&sdma 27 &sdma 28>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -414,8 +412,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48072000 0x80>; interrupts = <57>; - dmas = <&sdma 29 &sdma 30>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -425,8 +421,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48060000 0x80>; interrupts = <61>; - dmas = <&sdma 25 &sdma 26>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -440,7 +434,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; - mbox_dsp: dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 99721673d7af..46b8f9efd413 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -600,11 +600,11 @@ #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { + mbox_ipu: mbox-ipu { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <2 0 0>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index d8f13626cfd1..45435bb88c89 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -149,7 +149,7 @@ &gpio8 { /* TI trees use GPIO instead of msecure, see also muxing */ - p234 { + msecure-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index b148b289e830..06cc3a19ddaa 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -616,11 +616,11 @@ #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { + mbox_ipu: mbox-ipu { ti,mbox-tx = <0 0 0>; ti,mbox-rx = <1 0 0>; }; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <2 0 0>; }; diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi index 91163867be34..31f59de5190b 100644 --- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi +++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi @@ -9,27 +9,27 @@ partitions { #size-cells = <1>; u-boot@0 { - reg = <0x0 0x60000>; // 384KB + reg = <0x0 0xe0000>; // 896KB label = "u-boot"; }; - u-boot-env@60000 { - reg = <0x60000 0x20000>; // 128KB + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB label = "u-boot-env"; }; - kernel@80000 { - reg = <0x80000 0x500000>; // 5MB + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB label = "kernel"; }; - rofs@580000 { - reg = <0x580000 0x2a80000>; // 42.5MB + rofs@a00000 { + reg = <0xa00000 0x2000000>; // 32MB label = "rofs"; }; - rwfs@3000000 { - reg = <0x3000000 0x1000000>; // 16MB + rwfs@6000000 { + reg = <0x2a00000 0x1600000>; // 22MB label = "rwfs"; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index 282b89ce3d45..f7ea2e5dd191 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -216,6 +216,10 @@ }; }; +&adm_dma { + status = "okay"; +}; + &gmac0 { status = "okay"; @@ -251,6 +255,39 @@ status = "okay"; }; +&hs_phy_1 { + status = "okay"; +}; + +&nand { + status = "okay"; + + nandcs@0 { + compatible = "qcom,nandcs"; + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "RouterBoard NAND 1 Boot"; + reg = <0x0000000 0x0800000>; + }; + + main@800000 { + label = "RouterBoard NAND 1 Main"; + reg = <0x0800000 0x7800000>; + }; + }; + }; +}; + &qcom_pinmux { buttons_pins: buttons_pins { mux { @@ -305,4 +342,25 @@ input-disable; }; }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio4"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; +}; + +&ss_phy_1 { + status = "okay"; +}; + +&usb3_1 { + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 98995ead4413..7bcf5ef92157 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -2,6 +2,8 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/gpio/gpio.h> @@ -46,6 +48,228 @@ }; }; + thermal-zones { + tsens_tz_sensor0 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 0>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor6 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor7 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor8 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor9 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + tsens_tz_sensor10 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; @@ -185,6 +409,31 @@ bias-pull-up; }; }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; }; intc: interrupt-controller@2000000 { @@ -226,6 +475,26 @@ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; + adm_dma: dma-controller@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + saw0: regulator@2089000 { compatible = "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; @@ -403,6 +672,28 @@ status = "disabled"; }; + nand: nand-controller@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + sata: sata@29000000 { compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; @@ -436,6 +727,12 @@ reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; + tsens_calib: calib@400 { + reg = <0x400 0xb>; + }; + tsens_calib_backup: calib_backup@410 { + reg = <0x410 0xb>; + }; }; gcc: clock-controller@900000 { @@ -443,6 +740,38 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor@900000 { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ack", "err", "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; }; tcsr: syscon@1a400000 { @@ -450,6 +779,14 @@ reg = <0x1a400000 0x100>; }; + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu_l2_aux"; + }; + lcc: clock-controller@28000000 { compatible = "qcom,lcc-ipq8064"; reg = <0x28000000 0x1000>; @@ -718,6 +1055,94 @@ status = "disabled"; }; + hs_phy_0: phy@100f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_0: phy@100f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_0: usb3@100f8800 { + compatible = "qcom,dwc3", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100f8800 0x8000>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_0: dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_1: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + ss_phy_1: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + usb3_1: usb3@110f8800 { + compatible = "qcom,dwc3", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x110f8800 0x8000>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_1: dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; regulator-name = "SDCC Power"; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index dd1b976d2a6c..a2279686ffcc 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -47,7 +47,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -56,6 +55,7 @@ clock-frequency = <1400000000>; clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; power-domains = <&sysc R8A7742_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -77,6 +77,7 @@ clock-frequency = <1400000000>; clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; power-domains = <&sysc R8A7742_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -98,6 +99,7 @@ clock-frequency = <1400000000>; clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; power-domains = <&sysc R8A7742_PD_CA15_CPU2>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -119,6 +121,7 @@ clock-frequency = <1400000000>; clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; power-domains = <&sysc R8A7742_PD_CA15_CPU3>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -750,6 +753,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 6e37b8da278b..7e5e09d210ec 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -49,7 +49,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -59,6 +58,7 @@ clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -78,6 +78,7 @@ clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -702,6 +703,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index ace20861c0c4..8419683a9d83 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -49,7 +49,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -59,6 +58,7 @@ clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7744_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -78,6 +78,7 @@ clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7744_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -702,6 +703,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index be33bdabe452..f877c51f769c 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -64,7 +64,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -73,6 +72,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; power-domains = <&sysc R8A7745_PD_CA7_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -83,6 +83,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; power-domains = <&sysc R8A7745_PD_CA7_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -645,6 +646,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index a1d7f6e7a2e3..13ef1e9bf4d5 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -25,7 +25,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -34,6 +33,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; power-domains = <&sysc R8A77470_PD_CA7_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -44,6 +44,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; power-domains = <&sysc R8A77470_PD_CA7_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -537,6 +538,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index c9f8735860bf..95efbafb0b70 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -166,6 +166,7 @@ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; @@ -177,6 +178,7 @@ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; @@ -188,6 +190,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index d2240b89ee52..465845323495 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -145,7 +145,7 @@ status = "okay"; clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; - clock-names = "du", "dclkin.0"; + clock-names = "du.0", "dclkin.0"; ports { port@0 { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 74d7e9084eab..39fc58f32df6 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -198,6 +198,7 @@ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; @@ -209,6 +210,7 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; @@ -220,6 +222,7 @@ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; status = "disabled"; }; @@ -463,6 +466,7 @@ reg = <0xfff80000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; + clock-names = "du.0"; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 2dad0742d2ba..fa6d986b5d46 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -81,6 +81,9 @@ keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + one { linux,code = <KEY_1>; label = "SW2-1"; @@ -659,6 +662,11 @@ groups = "audio_clk_a"; function = "audio_clk"; }; + + keyboard_pins: keyboard { + pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28"; + bias-pull-up; + }; }; ðer { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index de29394eed63..ed6dd4fcc503 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -69,7 +69,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -78,6 +77,7 @@ clock-frequency = <1300000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -99,6 +99,7 @@ clock-frequency = <1300000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -120,6 +121,7 @@ clock-frequency = <1300000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU2>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -141,6 +143,7 @@ clock-frequency = <1300000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU3>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; voltage-tolerance = <1>; /* 1% */ @@ -162,6 +165,7 @@ clock-frequency = <780000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; capacity-dmips-mhz = <539>; }; @@ -173,6 +177,7 @@ clock-frequency = <780000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; capacity-dmips-mhz = <539>; }; @@ -184,6 +189,7 @@ clock-frequency = <780000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU2>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; capacity-dmips-mhz = <539>; }; @@ -195,6 +201,7 @@ clock-frequency = <780000000>; clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU3>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; capacity-dmips-mhz = <539>; }; @@ -768,6 +775,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 61e881bbbf6e..2a8b6fd9095c 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -81,7 +81,7 @@ keyboard { compatible = "gpio-keys"; - pinctrl-0 = <&sw2_pins>; + pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; key-1 { @@ -622,7 +622,7 @@ function = "audio_clk"; }; - sw2_pins: sw2 { + keyboard_pins: keyboard { pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3"; bias-pull-up; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 9d8320f71a6a..0ccc162d3c2c 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -68,7 +68,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -77,6 +76,7 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; voltage-tolerance = <1>; /* 1% */ clock-latency = <300000>; /* 300 us */ @@ -97,6 +97,7 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; voltage-tolerance = <1>; /* 1% */ clock-latency = <300000>; /* 300 us */ @@ -728,6 +729,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index c100ae903a46..62aa9f61321b 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -112,6 +112,9 @@ keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + key-1 { linux,code = <KEY_1>; label = "SW2-1"; @@ -235,6 +238,11 @@ function = "du1"; }; + keyboard_pins: keyboard { + pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02"; + bias-pull-up; + }; + pmic_irq_pins: pmicirq { groups = "intc_irq2"; function = "intc"; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 253e8bf643d1..9cdb73894ac2 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -45,7 +45,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -54,6 +53,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; }; @@ -64,6 +64,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA15>; }; @@ -537,6 +538,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 87fa57a99399..479e0fdf0c37 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -64,9 +64,12 @@ reg = <0 0x40000000 0 0x40000000>; }; - gpio-keys { + keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + key-1 { gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; @@ -567,6 +570,11 @@ function = "audio_clk"; }; + keyboard_pins: keyboard { + pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3"; + bias-pull-up; + }; + vin0_pins: vin0 { groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; function = "vin0"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 6d74475030ed..dea4b1e108af 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -60,7 +60,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -69,6 +68,7 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU0>; + enable-method = "renesas,apmu"; voltage-tolerance = <1>; /* 1% */ clock-latency = <300000>; /* 300 us */ @@ -89,6 +89,7 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + enable-method = "renesas,apmu"; voltage-tolerance = <1>; /* 1% */ clock-latency = <300000>; /* 300 us */ diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f9dba5688d3f..f330d796a772 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a7794.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Alt"; @@ -94,6 +95,42 @@ #size-cells = <1>; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + + one { + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + }; + two { + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; + three { + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + }; + four { + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + }; + }; + vga-encoder { compatible = "adi,adv7123"; @@ -319,6 +356,11 @@ groups = "usb1"; function = "usb1"; }; + + keyboard_pins: keyboard { + pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12"; + bias-pull-up; + }; }; &cmt0 { diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index eb89a27a6ed0..cafa3046daa4 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -45,9 +45,12 @@ reg = <0 0x40000000 0 0x40000000>; }; - gpio-keys { + keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + key-3 { gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_3>; @@ -358,6 +361,11 @@ function = "du1"; }; + keyboard_pins: keyboard { + pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12"; + bias-pull-up; + }; + ssi_pins: sound { groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; function = "ssi"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 330dc516ecd1..eac9ed8df0be 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -62,7 +62,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -71,6 +70,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU0>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -81,6 +81,7 @@ clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU1>; + enable-method = "renesas,apmu"; next-level-cache = <&L2_CA7>; }; @@ -598,6 +599,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 7154b827ea2f..e817eba8c622 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -390,7 +390,7 @@ }; }; - sleep { + suspend { global_pwroff: global-pwroff { rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index e24230d50a78..ffa9bc7ed3d0 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3036-cru.h> #include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/power/rk3036-power.h> / { #address-cells = <1>; @@ -111,10 +112,32 @@ assigned-clock-rates = <100000000>; clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; clock-names = "bus", "core"; + power-domains = <&power RK3036_PD_GPU>; resets = <&cru SRST_GPU>; status = "disabled"; }; + vpu: video-codec@10108000 { + compatible = "rockchip,rk3036-vpu"; + reg = <0x10108000 0x800>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3036_PD_VPU>; + }; + + vpu_mmu: iommu@10108800 { + compatible = "rockchip,iommu"; + reg = <0x10108800 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3036_PD_VPU>; + #iommu-cells = <0>; + }; + vop: vop@10118000 { compatible = "rockchip,rk3036-vop"; reg = <0x10118000 0x19c>; @@ -124,6 +147,7 @@ resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; reset-names = "axi", "ahb", "dclk"; iommus = <&vop_mmu>; + power-domains = <&power RK3036_PD_VIO>; status = "disabled"; vop_out: port { @@ -140,13 +164,28 @@ compatible = "rockchip,iommu"; reg = <0x10118300 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>; clock-names = "aclk", "iface"; + power-domains = <&power RK3036_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; + qos_gpu: qos@1012d000 { + compatible = "rockchip,rk3036-qos", "syscon"; + reg = <0x1012d000 0x20>; + }; + + qos_vpu: qos@1012e000 { + compatible = "rockchip,rk3036-qos", "syscon"; + reg = <0x1012e000 0x20>; + }; + + qos_vio: qos@1012f000 { + compatible = "rockchip,rk3036-qos", "syscon"; + reg = <0x1012f000 0x20>; + }; + gic: interrupt-controller@10139000 { compatible = "arm,gic-400"; interrupt-controller; @@ -302,6 +341,37 @@ compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd"; reg = <0x20008000 0x1000>; + power: power-controller { + compatible = "rockchip,rk3036-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3036_PD_VIO { + reg = <RK3036_PD_VIO>; + clocks = <&cru ACLK_LCDC>, + <&cru HCLK_LCDC>, + <&cru SCLK_LCDC>; + pm_qos = <&qos_vio>; + #power-domain-cells = <0>; + }; + + power-domain@RK3036_PD_VPU { + reg = <RK3036_PD_VPU>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3036_PD_GPU { + reg = <RK3036_PD_GPU>; + clocks = <&cru SCLK_GPU>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x1d8>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index eba7a1344976..390aa33cd55a 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -12,6 +12,11 @@ model = "bq Curie 2"; compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 6b121658d93c..a66d915aa0f6 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -10,6 +10,10 @@ model = "MarsBoard RK3066"; compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; + aliases { + mmc0 = &mmc0; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index eed9e60cffa2..9790bc63b50a 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -10,6 +10,11 @@ model = "Rikomagic MK808"; compatible = "rikomagic,mk808", "rockchip,rk3066a"; + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 309518403d86..12b2e59aebc4 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -11,6 +11,12 @@ model = "Rayeager PX2"; compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; @@ -58,7 +64,7 @@ }; /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ - vcc_stdby: 5v-stdby-regulator { + vcc_stdby: stdby-regulator { compatible = "regulator-fixed"; regulator-name = "5v_stdby"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 252750c97f97..f5a665b5d209 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -217,7 +217,7 @@ <150000000>, <75000000>; }; - timer@2000e000 { + timer2: timer@2000e000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x2000e000 0x100>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -238,7 +238,7 @@ }; }; - timer@20038000 { + timer0: timer@20038000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x20038000 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; @@ -246,7 +246,7 @@ clock-names = "timer", "pclk"; }; - timer@2003a000 { + timer1: timer@2003a000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x2003a000 0x100>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -266,30 +266,6 @@ status = "disabled"; }; - usbphy: phy { - compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - usbphy0: usb-phy@17c { - #phy-cells = <0>; - reg = <0x17c>; - clocks = <&cru SCLK_OTGPHY0>; - clock-names = "phyclk"; - #clock-cells = <0>; - }; - - usbphy1: usb-phy@188 { - #phy-cells = <0>; - reg = <0x188>; - clocks = <&cru SCLK_OTGPHY1>; - clock-names = "phyclk"; - #clock-cells = <0>; - }; - }; - pinctrl: pinctrl { compatible = "rockchip,rk3066a-pinctrl"; rockchip,grf = <&grf>; @@ -702,6 +678,34 @@ power-domains = <&power RK3066_PD_GPU>; }; +&grf { + compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd"; + + usbphy: usbphy { + compatible = "rockchip,rk3066a-usb-phy", + "rockchip,rk3288-usb-phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy@17c { + reg = <0x17c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + + usbphy1: usb-phy@188 { + reg = <0x188>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_xfer>; @@ -755,7 +759,7 @@ #address-cells = <1>; #size-cells = <0>; - pd_vio@RK3066_PD_VIO { + power-domain@RK3066_PD_VIO { reg = <RK3066_PD_VIO>; clocks = <&cru ACLK_LCDC0>, <&cru ACLK_LCDC1>, @@ -780,21 +784,24 @@ <&qos_cif1>, <&qos_ipp>, <&qos_rga>; + #power-domain-cells = <0>; }; - pd_video@RK3066_PD_VIDEO { + power-domain@RK3066_PD_VIDEO { reg = <RK3066_PD_VIDEO>; clocks = <&cru ACLK_VDPU>, <&cru ACLK_VEPU>, <&cru HCLK_VDPU>, <&cru HCLK_VEPU>; pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; }; - pd_gpu@RK3066_PD_GPU { + power-domain@RK3066_PD_GPU { reg = <RK3066_PD_GPU>; clocks = <&cru ACLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; }; }; @@ -861,6 +868,10 @@ pinctrl-0 = <&uart3_xfer>; }; +&vpu { + power-domains = <&power RK3066_PD_VIDEO>; +}; + &wdt { compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; }; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index 66a0ff196eb1..85d3fce0142f 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -13,6 +13,12 @@ model = "BQ Edison2 Quad-Core"; compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index c32e1d441cf7..39c60426c9c9 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -11,6 +11,11 @@ model = "Rockchip PX3-EVB"; compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; + aliases { + mmc0 = &mmc0; + mmc1 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index b0fef82c0a71..36c0945f43b2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -11,6 +11,10 @@ model = "Radxa Rock"; compatible = "radxa,rock", "rockchip,rk3188"; + aliases { + mmc0 = &mmc0; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 2298a8d840ba..793a1b9117fe 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -150,16 +150,16 @@ compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer"; reg = <0x2000e000 0x20>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>; + clock-names = "pclk", "timer"; }; timer6: timer@200380a0 { compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer"; reg = <0x200380a0 0x20>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>; + clock-names = "pclk", "timer"; }; i2s0: i2s@1011a000 { @@ -214,30 +214,6 @@ }; }; - usbphy: phy { - compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - usbphy0: usb-phy@10c { - #phy-cells = <0>; - reg = <0x10c>; - clocks = <&cru SCLK_OTGPHY0>; - clock-names = "phyclk"; - #clock-cells = <0>; - }; - - usbphy1: usb-phy@11c { - #phy-cells = <0>; - reg = <0x11c>; - clocks = <&cru SCLK_OTGPHY1>; - clock-names = "phyclk"; - #clock-cells = <0>; - }; - }; - pinctrl: pinctrl { compatible = "rockchip,rk3188-pinctrl"; rockchip,grf = <&grf>; @@ -662,6 +638,34 @@ power-domains = <&power RK3188_PD_GPU>; }; +&grf{ + compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd"; + + usbphy: usbphy { + compatible = "rockchip,rk3188-usb-phy", + "rockchip,rk3288-usb-phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy@10c { + reg = <0x10c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + + usbphy1: usb-phy@11c { + reg = <0x11c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + }; +}; + &i2c0 { compatible = "rockchip,rk3188-i2c"; pinctrl-names = "default"; @@ -699,7 +703,7 @@ #address-cells = <1>; #size-cells = <0>; - pd_vio@RK3188_PD_VIO { + power-domain@RK3188_PD_VIO { reg = <RK3188_PD_VIO>; clocks = <&cru ACLK_LCDC0>, <&cru ACLK_LCDC1>, @@ -719,21 +723,24 @@ <&qos_cif0>, <&qos_ipp>, <&qos_rga>; + #power-domain-cells = <0>; }; - pd_video@RK3188_PD_VIDEO { + power-domain@RK3188_PD_VIDEO { reg = <RK3188_PD_VIDEO>; clocks = <&cru ACLK_VDPU>, <&cru ACLK_VEPU>, <&cru HCLK_VDPU>, <&cru HCLK_VEPU>; pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; }; - pd_gpu@RK3188_PD_GPU { + power-domain@RK3188_PD_GPU { reg = <RK3188_PD_GPU>; clocks = <&cru ACLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; }; }; @@ -794,6 +801,11 @@ pinctrl-0 = <&uart3_xfer>; }; +&vpu { + compatible = "rockchip,rk3188-vpu", "rockchip,rk3066-vpu"; + power-domains = <&power RK3188_PD_VIDEO>; +}; + &wdt { compatible = "rockchip,rk3188-wdt", "snps,dw-wdt"; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 208f21245095..75af99c76d7e 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/power/rk3228-power.h> / { #address-cells = <1>; @@ -190,7 +191,65 @@ status = "disabled"; }; - u2phy0: usb2-phy@760 { + power: power-controller { + compatible = "rockchip,rk3228-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3228_PD_VIO { + reg = <RK3228_PD_VIO>; + clocks = <&cru ACLK_HDCP>, + <&cru SCLK_HDCP>, + <&cru ACLK_IEP>, + <&cru HCLK_IEP>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>, + <&cru SCLK_RGA>; + pm_qos = <&qos_hdcp>, + <&qos_iep>, + <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + + power-domain@RK3228_PD_VOP { + reg = <RK3228_PD_VOP>; + clocks =<&cru ACLK_VOP>, + <&cru DCLK_VOP>, + <&cru HCLK_VOP>; + pm_qos = <&qos_vop>; + #power-domain-cells = <0>; + }; + + power-domain@RK3228_PD_VPU { + reg = <RK3228_PD_VPU>; + clocks = <&cru ACLK_VPU>, + <&cru HCLK_VPU>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3228_PD_RKVDEC { + reg = <RK3228_PD_RKVDEC>; + clocks = <&cru ACLK_RKVDEC>, + <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; + pm_qos = <&qos_rkvdec_r>, + <&qos_rkvdec_w>; + #power-domain-cells = <0>; + }; + + power-domain@RK3228_PD_GPU { + reg = <RK3228_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + + u2phy0: usb2phy@760 { compatible = "rockchip,rk3228-usb2phy"; reg = <0x0760 0x0c>; clocks = <&cru SCLK_OTGPHY0>; @@ -217,7 +276,7 @@ }; }; - u2phy1: usb2-phy@800 { + u2phy1: usb2phy@800 { compatible = "rockchip,rk3228-usb2phy"; reg = <0x0800 0x0c>; clocks = <&cru SCLK_OTGPHY1>; @@ -379,7 +438,6 @@ reg = <0x110b0000 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; status = "disabled"; @@ -390,7 +448,6 @@ reg = <0x110b0010 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; status = "disabled"; @@ -401,7 +458,6 @@ reg = <0x110b0020 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; status = "disabled"; @@ -412,7 +468,6 @@ reg = <0x110b0030 0x10>; #pwm-cells = <2>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; status = "disabled"; @@ -517,7 +572,7 @@ pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; pinctrl-2 = <&otp_pin>; - #thermal-sensor-cells = <0>; + #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; }; @@ -550,30 +605,54 @@ "ppmmu1"; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; clock-names = "bus", "core"; + power-domains = <&power RK3228_PD_GPU>; resets = <&cru SRST_GPU_A>; status = "disabled"; }; + vpu: video-codec@20020000 { + compatible = "rockchip,rk3228-vpu", "rockchip,rk3399-vpu"; + reg = <0x20020000 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3228_PD_VPU>; + }; + vpu_mmu: iommu@20020800 { compatible = "rockchip,iommu"; reg = <0x20020800 0x100>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; - iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3228_PD_VPU>; + #iommu-cells = <0>; + }; + + vdec: video-codec@20030000 { + compatible = "rockchip,rk3228-vdec", "rockchip,rk3399-vdec"; + reg = <0x20030000 0x480>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + assigned-clocks = <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; + assigned-clock-rates = <300000000>, <300000000>; + iommus = <&vdec_mmu>; + power-domains = <&power RK3228_PD_RKVDEC>; }; vdec_mmu: iommu@20030480 { compatible = "rockchip,iommu"; reg = <0x20030480 0x40>, <0x200304c0 0x40>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vdec_mmu"; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; - iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3228_PD_RKVDEC>; + #iommu-cells = <0>; }; vop: vop@20050000 { @@ -585,6 +664,7 @@ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; reset-names = "axi", "ahb", "dclk"; iommus = <&vop_mmu>; + power-domains = <&power RK3228_PD_VOP>; status = "disabled"; vop_out: port { @@ -602,9 +682,9 @@ compatible = "rockchip,iommu"; reg = <0x20053f00 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; + power-domains = <&power RK3228_PD_VOP>; #iommu-cells = <0>; status = "disabled"; }; @@ -615,6 +695,7 @@ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3228_PD_VIO>; resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>; reset-names = "core", "axi", "ahb"; }; @@ -623,10 +704,10 @@ compatible = "rockchip,iommu"; reg = <0x20070800 0x100>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "iep_mmu"; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; clock-names = "aclk", "iface"; - iommu-cells = <0>; + power-domains = <&power RK3228_PD_VIO>; + #iommu-cells = <0>; status = "disabled"; }; @@ -800,6 +881,51 @@ status = "disabled"; }; + qos_iep: qos@31030080 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31030080 0x20>; + }; + + qos_rga_w: qos@31030100 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31030100 0x20>; + }; + + qos_hdcp: qos@31030180 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31030180 0x20>; + }; + + qos_rga_r: qos@31030200 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31030200 0x20>; + }; + + qos_vpu: qos@31040000 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31040000 0x20>; + }; + + qos_gpu: qos@31050000 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31050000 0x20>; + }; + + qos_vop: qos@31060000 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31060000 0x20>; + }; + + qos_rkvdec_r: qos@31070000 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31070000 0x20>; + }; + + qos_rkvdec_w: qos@31070080 { + compatible = "rockchip,rk3228-qos", "syscon"; + reg = <0x31070080 0x20>; + }; + gic: interrupt-controller@32010000 { compatible = "arm,gic-400"; interrupt-controller; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 44bb5e6f83b1..76363b8afcb9 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -218,7 +218,7 @@ flash0-supply = <&vcc_flash>; flash1-supply = <&vccio_pmu>; gpio30-supply = <&vccio_pmu>; - gpio1830 = <&vcc_io>; + gpio1830-supply = <&vcc_io>; lcdc-supply = <&vcc_io>; sdcard-supply = <&vccio_sd>; wifi-supply = <&vcc_18>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index aa50f8ed4ca0..b156a83eb7d7 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -379,10 +379,10 @@ audio-supply = <&vcc_18>; bb-supply = <&vcc_io>; dvp-supply = <&vcc_io>; - flash0-suuply = <&vcc_18>; + flash0-supply = <&vcc_18>; flash1-supply = <&vcc_lan>; gpio30-supply = <&vcc_io>; - gpio1830 = <&vcc_io>; + gpio1830-supply = <&vcc_io>; lcdc-supply = <&vcc_io>; sdcard-supply = <&vccio_sd>; wifi-supply = <&vcc_18>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 05557ad02b33..9c5a7791a1ab 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -196,8 +196,8 @@ compatible = "rockchip,rk3288-timer"; reg = <0x0 0xff810000 0x0 0x20>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; display-subsystem { @@ -765,7 +765,7 @@ * *_HDMI HDMI * *_MIPI_* MIPI */ - pd_vio@RK3288_PD_VIO { + power-domain@RK3288_PD_VIO { reg = <RK3288_PD_VIO>; clocks = <&cru ACLK_IEP>, <&cru ACLK_ISP>, @@ -801,19 +801,21 @@ <&qos_vio2_rga_r>, <&qos_vio2_rga_w>, <&qos_vio1_isp_r>; + #power-domain-cells = <0>; }; /* * Note: The following 3 are HEVC(H.265) clocks, * and on the ACLK_HEVC_NIU (NOC). */ - pd_hevc@RK3288_PD_HEVC { + power-domain@RK3288_PD_HEVC { reg = <RK3288_PD_HEVC>; clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, <&cru SCLK_HEVC_CORE>; pm_qos = <&qos_hevc_r>, <&qos_hevc_w>; + #power-domain-cells = <0>; }; /* @@ -821,22 +823,24 @@ * (video endecoder & decoder) clocks that on the * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). */ - pd_video@RK3288_PD_VIDEO { + power-domain@RK3288_PD_VIDEO { reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; pm_qos = <&qos_video>; + #power-domain-cells = <0>; }; /* * Note: ACLK_GPU is the GPU clock, * and on the ACLK_GPU_NIU (NOC). */ - pd_gpu@RK3288_PD_GPU { + power-domain@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; pm_qos = <&qos_gpu_r>, <&qos_gpu_w>; + #power-domain-cells = <0>; }; }; @@ -1582,7 +1586,7 @@ drive-strength = <12>; }; - sleep { + suspend { global_pwroff: global-pwroff { rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 755c946f11de..616a828e0c6e 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -21,9 +21,6 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; - mshc0 = &emmc; - mshc1 = &mmc0; - mshc2 = &mmc1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -50,6 +47,18 @@ status = "disabled"; }; + vpu: video-codec@10104000 { + compatible = "rockchip,rk3066-vpu"; + reg = <0x10104000 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>, + <&cru ACLK_VEPU>, <&cru HCLK_VEPU>; + clock-names = "aclk_vdpu", "hclk_vdpu", + "aclk_vepu", "hclk_vepu"; + }; + L2: cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; @@ -256,7 +265,7 @@ }; grf: grf@20008000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x20008000 0x200>; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 884872ca5207..9bd0acf3b708 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -265,7 +265,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy: usb2-phy@100 { + u2phy: usb2phy@100 { compatible = "rockchip,rv1108-usb2phy"; reg = <0x100 0x0c>; clocks = <&cru SCLK_USBPHY>; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 5c1e12d39747..c6f39147cb96 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -358,15 +358,6 @@ reg = <0x4a>; interrupt-parent = <&gpj0>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - - atmel,x-line = <17>; - atmel,y-line = <11>; - atmel,x-size = <800>; - atmel,y-size = <480>; - atmel,burst-length = <0x21>; - atmel,threshold = <0x28>; - atmel,orientation = <1>; - vdd-supply = <&tsp_reg>; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index e47e1ca63043..f6e3e6f57252 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -794,7 +794,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x0003ff00 0x8002a800 0x00000000 /* pioD */ + 0xb003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts index 3cc9a23910be..a61a078ea042 100644 --- a/arch/arm/boot/dts/sd5203.dts +++ b/arch/arm/boot/dts/sd5203.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2020 Hisilicon Limited. + * Copyright (c) 2020 HiSilicon Limited. * * DTS file for Hisilicon SD5203 Board */ diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index a16a00fb5fa5..d0fe3f9aa183 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -34,7 +34,7 @@ #clock-cells = <1>; }; - ab8500_gpio: ab8500-gpio { + ab8500_gpio: ab8500-gpiocontroller { compatible = "stericsson,ab8500-gpio"; gpio-controller; #gpio-cells = <2>; @@ -42,15 +42,15 @@ ab8500-rtc { compatible = "stericsson,ab8500-rtc"; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH - 18 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>, + <18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "60S", "ALARM"; }; gpadc: ab8500-gpadc { compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 IRQ_TYPE_LEVEL_HIGH - 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH>, + <39 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "HW_CONV_END", "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_tvout_reg>; #address-cells = <1>; @@ -219,13 +219,13 @@ ab8500_usb { compatible = "stericsson,ab8500-usb"; - interrupts = < 90 IRQ_TYPE_LEVEL_HIGH - 96 IRQ_TYPE_LEVEL_HIGH - 14 IRQ_TYPE_LEVEL_HIGH - 15 IRQ_TYPE_LEVEL_HIGH - 79 IRQ_TYPE_LEVEL_HIGH - 74 IRQ_TYPE_LEVEL_HIGH - 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <90 IRQ_TYPE_LEVEL_HIGH>, + <96 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <74 IRQ_TYPE_LEVEL_HIGH>, + <75 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ID_WAKEUP_R", "ID_WAKEUP_F", "VBUS_DET_F", @@ -242,8 +242,8 @@ ab8500-ponkey { compatible = "stericsson,ab8500-poweron-key"; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH - 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>, + <7 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; }; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index cc045b2fc217..0defc15b9bbc 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -31,7 +31,7 @@ #clock-cells = <1>; }; - ab8505_gpio: ab8505-gpio { + ab8505_gpio: ab8505-gpiocontroller { compatible = "stericsson,ab8505-gpio"; gpio-controller; #gpio-cells = <2>; @@ -39,8 +39,8 @@ ab8500-rtc { compatible = "stericsson,ab8500-rtc"; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH - 18 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>, + <18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "60S", "ALARM"; }; @@ -182,13 +182,13 @@ ab8500_usb: ab8500_usb { compatible = "stericsson,ab8500-usb"; - interrupts = < 90 IRQ_TYPE_LEVEL_HIGH - 96 IRQ_TYPE_LEVEL_HIGH - 14 IRQ_TYPE_LEVEL_HIGH - 15 IRQ_TYPE_LEVEL_HIGH - 79 IRQ_TYPE_LEVEL_HIGH - 74 IRQ_TYPE_LEVEL_HIGH - 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <90 IRQ_TYPE_LEVEL_HIGH>, + <96 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <74 IRQ_TYPE_LEVEL_HIGH>, + <75 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ID_WAKEUP_R", "ID_WAKEUP_F", "VBUS_DET_F", @@ -205,8 +205,8 @@ ab8500-ponkey { compatible = "stericsson,ab8500-poweron-key"; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH - 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>, + <7 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; }; diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 4946743de7b9..3ccb7b5c7162 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -9,7 +9,7 @@ soc { prcmu@80157000 { ab8500 { - ab8500-gpio { + ab8500-gpiocontroller { /* Hog a few default settings */ pinctrl-names = "default"; pinctrl-0 = <&gpio2_default_mode>, diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index 8d59202cebd6..37e59403c01f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -104,6 +104,9 @@ * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; }; magnetometer@1e { /* Magnetometer */ @@ -136,6 +139,9 @@ /* INT2 would need to be open drain */ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; }; magnetometer@f { /* Magnetometer */ diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index 70f058352efc..00ce9d79f540 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -89,10 +89,12 @@ <19 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; }; magnetometer@1e { compatible = "st,lsm303dlm-magn"; - st,drdy-int-pin = <1>; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 13d216192904..c97e8d29004f 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -209,7 +209,7 @@ prcmu@80157000 { ab8500 { - ab8500-gpio { + ab8500-gpiocontroller { }; ab8500_usb { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index b344b3748143..40f1d7c9c1d4 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -376,7 +376,7 @@ prcmu@80157000 { ab8500 { - ab8500-gpio { + ab8500-gpiocontroller { /* * AB8500 GPIOs are numbered starting from 1, so the first * index 0 is what in the datasheet is called "GPIO1", and diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 0d43ee6583cf..40df7c61bf69 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -121,7 +121,7 @@ #size-cells = <0>; wifi@1 { - compatible = "brcm,bcm4329-fmac"; + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; reg = <1>; /* GPIO216 (WLAN_HOST_WAKE) */ @@ -162,6 +162,7 @@ pinctrl-1 = <&u0_a_1_sleep>; bluetooth { + /* BCM4334B0 actually */ compatible = "brcm,bcm4330-bt"; /* GPIO222 (BT_VREG_ON) */ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index f24369873ce2..25af066f6f3a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -401,8 +401,7 @@ status = "okay"; wifi@1 { - /* Actually BRCM4330 */ - compatible = "brcm,bcm4329-fmac"; + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; reg = <1>; /* GPIO216 WL_HOST_WAKE */ interrupt-parent = <&gpio6>; @@ -436,6 +435,7 @@ status = "okay"; bluetooth { + /* BCM4330B1 actually */ compatible = "brcm,bcm4330-bt"; /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; @@ -583,10 +583,9 @@ accelerometer@08 { compatible = "bosch,bma222"; reg = <0x08>; - /* FIXME: no idea about this */ - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "1"; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "-1"; vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index d28a00757d0b..94afd7a0fe1f 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -211,7 +211,7 @@ #size-cells = <0>; wifi@1 { - compatible = "brcm,bcm4329-fmac"; + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; reg = <1>; /* GPIO216 WL_HOST_WAKE */ interrupt-parent = <&gpio6>; @@ -247,6 +247,7 @@ /* FIXME: not quite working yet, probably needs regulators */ bluetooth { + /* BCM4334B0 actually */ compatible = "brcm,bcm4330-bt"; shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 7e10ae744c9d..9ac1ffe53413 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -119,17 +119,15 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "Wake up"; linux,code = <KEY_WAKEUP>; gpios = <&gpioa 0 0>; }; - button@1 { + button-1 { label = "Tamper"; linux,code = <KEY_RESTART>; gpios = <&gpioc 13 0>; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index ca8c192449ee..327613fd9666 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -81,12 +81,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "Wake up"; linux,code = <KEY_WAKEUP>; gpios = <&gpioc 13 0>; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 4774163af54b..155d9ffacc83 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -45,7 +45,7 @@ / { soc { - pinctrl: pin-controller { + pinctrl: pin-controller@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 3dc068b91ca1..075ac57d0bf4 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -81,12 +81,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "User"; linux,code = <KEY_HOME>; gpios = <&gpioa 0 0>; diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi index 3e7a17d9112e..e10d7a1f3207 100644 --- a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi @@ -42,54 +42,50 @@ #include "stm32f4-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller { - compatible = "st,stm32f429-pinctrl"; +&pinctrl { + compatible = "st,stm32f429-pinctrl"; - gpioa: gpio@40020000 { - gpio-ranges = <&pinctrl 0 0 16>; - }; + gpioa: gpio@40020000 { + gpio-ranges = <&pinctrl 0 0 16>; + }; - gpiob: gpio@40020400 { - gpio-ranges = <&pinctrl 0 16 16>; - }; + gpiob: gpio@40020400 { + gpio-ranges = <&pinctrl 0 16 16>; + }; - gpioc: gpio@40020800 { - gpio-ranges = <&pinctrl 0 32 16>; - }; + gpioc: gpio@40020800 { + gpio-ranges = <&pinctrl 0 32 16>; + }; - gpiod: gpio@40020c00 { - gpio-ranges = <&pinctrl 0 48 16>; - }; + gpiod: gpio@40020c00 { + gpio-ranges = <&pinctrl 0 48 16>; + }; - gpioe: gpio@40021000 { - gpio-ranges = <&pinctrl 0 64 16>; - }; + gpioe: gpio@40021000 { + gpio-ranges = <&pinctrl 0 64 16>; + }; - gpiof: gpio@40021400 { - gpio-ranges = <&pinctrl 0 80 16>; - }; + gpiof: gpio@40021400 { + gpio-ranges = <&pinctrl 0 80 16>; + }; - gpiog: gpio@40021800 { - gpio-ranges = <&pinctrl 0 96 16>; - }; + gpiog: gpio@40021800 { + gpio-ranges = <&pinctrl 0 96 16>; + }; - gpioh: gpio@40021c00 { - gpio-ranges = <&pinctrl 0 112 16>; - }; + gpioh: gpio@40021c00 { + gpio-ranges = <&pinctrl 0 112 16>; + }; - gpioi: gpio@40022000 { - gpio-ranges = <&pinctrl 0 128 16>; - }; + gpioi: gpio@40022000 { + gpio-ranges = <&pinctrl 0 128 16>; + }; - gpioj: gpio@40022400 { - gpio-ranges = <&pinctrl 0 144 16>; - }; + gpioj: gpio@40022400 { + gpio-ranges = <&pinctrl 0 144 16>; + }; - gpiok: gpio@40022800 { - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; + gpiok: gpio@40022800 { + gpio-ranges = <&pinctrl 0 160 8>; }; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index f6530d724d00..8748d5850298 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -283,8 +283,6 @@ }; timers13: timers@40001c00 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40001C00 0x400>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; @@ -299,8 +297,6 @@ }; timers14: timers@40002000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40002000 0x400>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; @@ -633,8 +629,6 @@ }; timers10: timers@40014400 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014400 0x400>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; @@ -649,8 +643,6 @@ }; timers11: timers@40014800 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014800 0x400>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; @@ -709,7 +701,7 @@ status = "disabled"; }; - rcc: rcc@40023810 { + rcc: rcc@40023800 { #reset-cells = <1>; #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 2e1b3bbbe4b5..8c982ae79f43 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -104,12 +104,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "User"; linux,code = <KEY_WAKEUP>; gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi index fff542662eea..6bf60263dff8 100644 --- a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi @@ -42,55 +42,51 @@ #include "stm32f4-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller { - compatible = "st,stm32f469-pinctrl"; +&pinctrl { + compatible = "st,stm32f469-pinctrl"; - gpioa: gpio@40020000 { - gpio-ranges = <&pinctrl 0 0 16>; - }; + gpioa: gpio@40020000 { + gpio-ranges = <&pinctrl 0 0 16>; + }; - gpiob: gpio@40020400 { - gpio-ranges = <&pinctrl 0 16 16>; - }; + gpiob: gpio@40020400 { + gpio-ranges = <&pinctrl 0 16 16>; + }; - gpioc: gpio@40020800 { - gpio-ranges = <&pinctrl 0 32 16>; - }; + gpioc: gpio@40020800 { + gpio-ranges = <&pinctrl 0 32 16>; + }; - gpiod: gpio@40020c00 { - gpio-ranges = <&pinctrl 0 48 16>; - }; + gpiod: gpio@40020c00 { + gpio-ranges = <&pinctrl 0 48 16>; + }; - gpioe: gpio@40021000 { - gpio-ranges = <&pinctrl 0 64 16>; - }; + gpioe: gpio@40021000 { + gpio-ranges = <&pinctrl 0 64 16>; + }; - gpiof: gpio@40021400 { - gpio-ranges = <&pinctrl 0 80 16>; - }; + gpiof: gpio@40021400 { + gpio-ranges = <&pinctrl 0 80 16>; + }; - gpiog: gpio@40021800 { - gpio-ranges = <&pinctrl 0 96 16>; - }; + gpiog: gpio@40021800 { + gpio-ranges = <&pinctrl 0 96 16>; + }; - gpioh: gpio@40021c00 { - gpio-ranges = <&pinctrl 0 112 16>; - }; + gpioh: gpio@40021c00 { + gpio-ranges = <&pinctrl 0 112 16>; + }; - gpioi: gpio@40022000 { - gpio-ranges = <&pinctrl 0 128 16>; - }; + gpioi: gpio@40022000 { + gpio-ranges = <&pinctrl 0 128 16>; + }; - gpioj: gpio@40022400 { - gpio-ranges = <&pinctrl 0 144 6>, - <&pinctrl 12 156 4>; - }; + gpioj: gpio@40022400 { + gpio-ranges = <&pinctrl 0 144 6>, + <&pinctrl 12 156 4>; + }; - gpiok: gpio@40022800 { - gpio-ranges = <&pinctrl 3 163 5>; - }; - }; + gpiok: gpio@40022800 { + gpio-ranges = <&pinctrl 3 163 5>; }; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index fe4cfda72a47..1cf8a23c2644 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -9,7 +9,7 @@ / { soc { - pinctrl: pin-controller { + pinctrl: pin-controller@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index e1df603fc981..014b416f57e6 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -265,8 +265,6 @@ }; timers13: timers@40001c00 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40001C00 0x400>; clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; @@ -281,8 +279,6 @@ }; timers14: timers@40002000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40002000 0x400>; clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; @@ -364,9 +360,9 @@ status = "disabled"; }; - i2c3: i2c@40005C00 { + i2c3: i2c@40005c00 { compatible = "st,stm32f7-i2c"; - reg = <0x40005C00 0x400>; + reg = <0x40005c00 0x400>; interrupts = <72>, <73>; resets = <&rcc STM32F7_APB1_RESET(I2C3)>; @@ -531,8 +527,6 @@ }; timers10: timers@40014400 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014400 0x400>; clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; @@ -547,8 +541,6 @@ }; timers11: timers@40014800 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014800 0x400>; clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 0ce7fbc20fa4..be943b701980 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -75,12 +75,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "User"; linux,code = <KEY_HOME>; gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 05ecdf9ff03a..6e42ca2dada2 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -485,8 +485,6 @@ }; lptimer4: timer@58002c00 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x58002c00 0x400>; clocks = <&rcc LPTIM4_CK>; @@ -501,8 +499,6 @@ }; lptimer5: timer@58003000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x58003000 0x400>; clocks = <&rcc LPTIM5_CK>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 060baa8b7e9d..5b60ecbd718f 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -118,6 +118,39 @@ }; }; + dcmi_pins_b: dcmi-1 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('C', 6, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('B', 9, AF13)>;/* DCMI_D7 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_b: dcmi-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('C', 6, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('B', 9, ANALOG)>;/* DCMI_D7 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index fcd3230c469b..bd289bf5d269 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1369,8 +1369,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, - <&mdma1 22 0x2 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, + <&mdma1 22 0x2 0x10100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; @@ -1416,12 +1416,6 @@ status = "disabled"; }; - stmmac_axi_config_0: stmmac-axi-config { - snps,wr_osr_lmt = <0x7>; - snps,rd_osr_lmt = <0x7>; - snps,blen = <0 0 0 0 16 8 4>; - }; - ethernet0: ethernet@5800a000 { compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; reg = <0x5800a000 0x2000>; @@ -1447,6 +1441,12 @@ snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; + + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; }; usbh_ohci: usb@5800c000 { diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index 674b2d330dc4..5670b23812a2 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -89,7 +89,7 @@ }; &pinctrl { - ltdc_pins: ltdc { + ltdc_pins: ltdc-0 { pins { pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */ <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */ diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 113c48b2ef93..a4b14ef3caee 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -184,8 +184,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -208,7 +206,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -219,13 +216,13 @@ vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index 6cf49a0a9e69..2d9461006810 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -173,8 +173,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -197,7 +195,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -213,7 +210,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -269,7 +266,7 @@ st,neg-edge; bus-width = <8>; vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; mmc-ddr-3_3v; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index a7ffec8f1516..be1dd5e9e744 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -64,7 +64,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,neg-edge; bus-width = <4>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 5523f4138fd6..c5ea08fec535 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -34,7 +34,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #size-cells = <0>; poll-interval = <20>; /* @@ -60,7 +59,6 @@ gpio-keys { compatible = "gpio-keys"; - #size-cells = <0>; button-1 { label = "TA2-GPIO-B"; @@ -184,12 +182,11 @@ }; - polytouch@38 { - compatible = "edt,edt-ft5x06"; + touchscreen@38 { + compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&gpiog>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - linux,wakeup; }; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 272a1a67a9ad..2af0a6752674 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -123,7 +123,6 @@ max-speed = <100>; phy-handle = <&phy0>; st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; mdio0 { #address-cells = <1>; @@ -132,6 +131,13 @@ phy0: ethernet-phy@1 { reg = <1>; + /* LAN8710Ai */ + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + clocks = <&rcc ETHCK_K>; + reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <500>; + reset-deassert-us = <500>; interrupt-parent = <&gpioi>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; @@ -144,7 +150,7 @@ pinctrl-1 = <&fmc_sleep_pins_b>; status = "okay"; - ksz8851: ks8851mll@1,0 { + ksz8851: ethernet@1,0 { compatible = "micrel,ks8851-mll"; reg = <1 0x0 0x2>, <1 0x2 0x20000>; interrupt-parent = <&gpioc>; @@ -327,8 +333,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -350,7 +354,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -366,7 +369,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -431,7 +434,7 @@ #size-cells = <0>; status = "okay"; - flash0: mx66l51235l@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 013ae369791d..2b0ac605549d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -198,7 +198,7 @@ #size-cells = <0>; status = "okay"; - flash0: spi-flash@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 713485a95795..6706d8311a66 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -146,8 +146,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -171,7 +169,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -182,13 +179,13 @@ vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 7344c37107c6..2beddbb3c518 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -198,7 +198,7 @@ }; link_codec: simple-audio-card,codec { - sound-dai = <&codec>; + sound-dai = <&codec 0>; }; }; @@ -238,7 +238,7 @@ }; codec: codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi new file mode 100644 index 000000000000..265e0fa57a32 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com> +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + +#include "sun8i-r40.dtsi" + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_aldo2>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_dcdc1>; + vcc-pc-supply = <®_aldo2>; + vcc-pd-supply = <®_dcdc1>; + vcc-pf-supply = <®_dldo4>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts new file mode 100644 index 000000000000..0bd1336206b8 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com> +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + +/dts-v1/; +#include "sun8i-r40-feta40i.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Forlinx OKA40i-C"; + compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40"; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; /* RS485 */ + serial7 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5 { /* this is how the leds are labeled on the board */ + gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo2>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11 + status = "okay"; +}; + +&mmc3 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10 + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_dc1sw { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pg_pins>; + status = "okay"; +}; + +&uart5 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart5_ph_pins>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pi_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index d5ad3b9efd12..291f4784e86c 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -357,6 +357,8 @@ clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC3>; reset-names = "ahb"; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; #address-cells = <1>; @@ -602,6 +604,15 @@ }; /omit-if-no-ref/ + mmc3_pins: mmc3-pins { + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2"; function = "spi0"; @@ -631,20 +642,65 @@ function = "spi1"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{ + pins = "PI16", "PI17"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + + /omit-if-no-ref/ + uart4_pg_pins: uart4-pg-pins { + pins = "PG10", "PG11"; + function = "uart4"; + }; + + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ + uart7_pi_pins: uart7-pi-pins { + pins = "PI20", "PI21"; + function = "uart7"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; wdt: watchdog@1c20c90 { diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index c279e13583ba..186c30cbe6ee 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -1,14 +1,40 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> */ #include "sun8i-v3s.dtsi" +/ { + soc { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins>; + resets = <&ccu RST_BUS_I2S0>; + status = "disabled"; + }; + }; +}; + &ccu { compatible = "allwinner,sun8i-v3-ccu"; }; +&codec_analog { + compatible = "allwinner,sun8i-v3-codec-analog", + "allwinner,sun8i-h3-codec-analog"; +}; + &emac { /delete-property/ phy-handle; /delete-property/ phy-mode; @@ -25,6 +51,11 @@ &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + i2s0_pins: i2s0-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "i2s"; + }; + uart1_pg_pins: uart1-pg-pins { pins = "PG6", "PG7"; function = "uart1"; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts index db5cd0b8574b..752ad05c8f83 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -49,16 +49,18 @@ compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + aliases { + ethernet0 = &emac; + }; + leds { /* The LEDs use PG0~2 pins, which conflict with MMC1 */ status = "disabled"; }; }; -&mmc1 { - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vcc3v3>; +&emac { + allwinner,leds-active-low; status = "okay"; }; @@ -94,3 +96,10 @@ voltage = <800000>; }; }; + +&mmc1 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index eb4cb63fef13..b30bc1a25ebb 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -1,5 +1,6 @@ /* * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -172,6 +173,15 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-v3s-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -275,6 +285,8 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; clock-names = "ahb", "mod"; + dmas = <&dma 16>, <&dma 16>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_CE>; reset-names = "ahb"; }; @@ -422,6 +434,15 @@ clocks = <&osc24M>; }; + pwm: pwm@1c21400 { + compatible = "allwinner,sun8i-v3s-pwm", + "allwinner,sun7i-a20-pwm"; + reg = <0x01c21400 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x400>; @@ -429,6 +450,25 @@ status = "disabled"; }; + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3s-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + codec_analog: codec-analog@1c23000 { + compatible = "allwinner,sun8i-v3s-codec-analog"; + reg = <0x01c23000 0x4>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -436,6 +476,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -447,6 +489,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -458,6 +502,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; @@ -537,6 +583,8 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 0b678afb2a5c..8b38f123f554 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -283,7 +283,7 @@ reg = <0x0 0x60007000 0x0 0x1000>; }; - actmon@6000c800 { + actmon: actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -295,6 +295,7 @@ operating-points-v2 = <&emc_bw_dfs_opp_table>; interconnects = <&mc TEGRA124_MC_MPCORER &emc>; interconnect-names = "cpu-read"; + #cooling-cells = <2>; }; gpio: gpio@6000d000 { diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2298fc034183..1976c383912a 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -420,11 +420,14 @@ reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>; gpio-controller; #gpio-cells = <2>; + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0x0000 /* MIC_LR_OUT# GPIO, output, low */ 0x0000 /* FM2018-enable GPIO, output, low */ @@ -759,7 +762,7 @@ mmc-pwrseq = <&brcm_wifi_pwrseq>; vmmc-supply = <&vdd_3v3_sys>; - vqmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_1v8_sys>; /* Azurewave AW-NH611 BCM4329 */ wifi@1 { @@ -1030,7 +1033,7 @@ nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>; nvidia,headset; @@ -1056,15 +1059,15 @@ trips { trip0: cpu-alert0 { - /* start throttling at 50C */ - temperature = <50000>; + /* start throttling at 60C */ + temperature = <60000>; hysteresis = <200>; type = "passive"; }; trip1: cpu-crit { - /* shut down at 60C */ - temperature = <60000>; + /* shut down at 70C */ + temperature = <70000>; hysteresis = <2000>; type = "critical"; }; @@ -1085,6 +1088,7 @@ emc-tables@0 { nvidia,ram-code = <0>; /* elpida-8gb */ + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1182,6 +1186,7 @@ emc-tables@1 { nvidia,ram-code = <1>; /* elpida-4gb */ + reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1279,6 +1284,7 @@ emc-tables@2 { nvidia,ram-code = <2>; /* hynix-8gb */ + reg = <2>; #address-cells = <1>; #size-cells = <0>; @@ -1376,6 +1382,7 @@ emc-tables@3 { nvidia,ram-code = <3>; /* hynix-4gb */ + reg = <3>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 86494cb4d5a1..ae4312eedcbd 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -748,7 +748,7 @@ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) - GPIO_ACTIVE_HIGH>; + GPIO_ACTIVE_LOW>; nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>; nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index a348ca30e522..b31c9bca16e6 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -84,7 +84,7 @@ nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 940a9f31cd86..3180bff90756 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -2,6 +2,8 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" #include "tegra20-cpu-opp-microvolt.dtsi" @@ -318,6 +320,7 @@ nvidia,ram-code = <0x0>; #address-cells = <1>; #size-cells = <0>; + reg = <0>; emc-table@166500 { reg = <166500>; @@ -497,9 +500,10 @@ }; }; - adt7461@4c { + adt7461: temperature-sensor@4c { compatible = "adi,adt7461"; reg = <0x4c>; + #thermal-sensor-cells = <1>; }; }; @@ -654,11 +658,46 @@ cpu0: cpu@0 { cpu-supply = <&cpu_vdd_reg>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { cpu-supply = <&cpu_vdd_reg>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; /* milliseconds */ + polling-delay = <1500>; /* milliseconds */ + + thermal-sensors = <&adt7461 1>; + + trips { + trip0: cpu-alert0 { + /* start throttling at 80C */ + temperature = <80000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 85C */ + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 378f23b2958b..5811b7006a9b 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -52,7 +52,7 @@ nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index c24d4a37613e..92d494b8c3d2 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -911,7 +911,7 @@ nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 44ced60315de..10ff09d86efa 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -61,7 +61,7 @@ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) - GPIO_ACTIVE_HIGH>; + GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 99a356c1ccec..5a2578b3707f 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -709,7 +709,7 @@ nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>; nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index dc773b1bf8ee..ae8300baa2d4 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -927,7 +927,6 @@ compatible = "ti,bq27541"; reg = <0x55>; power-supplies = <&power_supply>; - monitored-battery = <&battery_cell>; }; power_supply: charger@6a { @@ -1252,13 +1251,6 @@ }; thermal-zones { - skin-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <0>; /* milliseconds */ - - thermal-sensors = <&nct72 0>; - }; - cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -1274,8 +1266,8 @@ }; trip1: cpu-crit { - /* shut down at 60C */ - temperature = <60000>; + /* shut down at 65C */ + temperature = <65000>; hysteresis = <2000>; type = "critical"; }; @@ -1287,7 +1279,9 @@ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi index 17b6682ffce8..53966fa4eef2 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi @@ -182,4 +182,13 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + pmc@7000e400 { + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x3c>; + nvidia,reg-addr = <0x41>; + nvidia,reg-data = <0xe0>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi index b97da45ebdb4..9365ae607239 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi @@ -144,7 +144,16 @@ }; vdd_3v3_sys: regulator@1 { - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + pmc@7000e400 { + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x80>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 2dff14b87f3e..d9dd11569d4b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -630,7 +630,7 @@ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) - GPIO_ACTIVE_HIGH>; + GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 9a10e0d69762..ab8744f3d72d 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -463,7 +463,9 @@ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 44a6dbba7081..c577c191be4b 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -410,7 +410,7 @@ reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; - actmon@6000c800 { + actmon: actmon@6000c800 { compatible = "nvidia,tegra30-actmon"; reg = <0x6000c800 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -422,6 +422,7 @@ operating-points-v2 = <&emc_bw_dfs_opp_table>; interconnects = <&mc TEGRA30_MC_MPCORER &emc>; interconnect-names = "cpu-read"; + #cooling-cells = <2>; }; gpio: gpio@6000d000 { diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 41ce680e5f8d..a96d9d2d8dd8 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 79adea3f8cc1..5b44a979f250 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -25,6 +25,11 @@ /* Backlight configuration differs per PinePhone revision. */ }; + bt_sco_codec: bt-sco-codec { + #sound-dai-cells = <1>; + compatible = "linux,bt-sco"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -91,6 +96,8 @@ }; &codec { + pinctrl-names = "default"; + pinctrl-0 = <&aif3_pins>; status = "okay"; }; @@ -426,6 +433,7 @@ &sound { status = "okay"; + simple-audio-card,name = "PinePhone"; simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; simple-audio-card,widgets = "Microphone", "Headset Microphone", "Microphone", "Internal Microphone", @@ -447,6 +455,23 @@ "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", "MIC2", "Headset Microphone"; + + simple-audio-card,dai-link@2 { + format = "dsp_a"; + frame-master = <&link2_codec>; + bitclock-master = <&link2_codec>; + bitclock-inversion; + + link2_cpu: cpu { + sound-dai = <&bt_sco_codec 0>; + }; + + link2_codec: codec { + sound-dai = <&codec 2>; + dai-tdm-slot-num = <1>; + dai-tdm-slot-width = <32>; + }; + }; }; &uart0 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 5b30e6c1fa05..6ddb717f2f98 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -131,12 +131,10 @@ }; sound: sound { + #address-cells = <1>; + #size-cells = <0>; compatible = "simple-audio-card"; simple-audio-card,name = "sun50i-a64-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&cpudai>; - simple-audio-card,bitclock-master = <&cpudai>; - simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = "Left DAC", "DACL", @@ -145,12 +143,19 @@ "ADCR", "Right ADC"; status = "disabled"; - cpudai: simple-audio-card,cpu { - sound-dai = <&dai>; - }; + simple-audio-card,dai-link@0 { + format = "i2s"; + frame-master = <&link0_cpu>; + bitclock-master = <&link0_cpu>; + mclk-fs = <128>; + + link0_cpu: cpu { + sound-dai = <&dai>; + }; - link_codec: simple-audio-card,codec { - sound-dai = <&codec>; + link0_codec: codec { + sound-dai = <&codec 0>; + }; }; }; @@ -659,6 +664,18 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + aif2_pins: aif2-pins { + pins = "PB4", "PB5", "PB6", "PB7"; + function = "aif2"; + }; + + /omit-if-no-ref/ + aif3_pins: aif3-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "aif3"; + }; + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; @@ -799,6 +816,23 @@ }; }; + timer@1c20c00 { + compatible = "allwinner,sun50i-a64-timer", + "allwinner,sun8i-a23-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@1c20ca0 { + compatible = "allwinner,sun50i-a64-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-spdif", @@ -880,7 +914,7 @@ }; codec: codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun50i-a64-codec", "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; @@ -1325,13 +1359,5 @@ #address-cells = <1>; #size-cells = <0>; }; - - wdt0: watchdog@1c20ca0 { - compatible = "allwinner,sun50i-a64-wdt", - "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; - }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts new file mode 100644 index 000000000000..55bcdf8d1a07 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn> + * + * Based on sun50i-h5-nanopi-neo-plus2.dts, which is: + * Copyright (C) 2017 Antony Antony <antony@phenome.org> + * Copyright (C) 2016 ARM Ltd. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "FriendlyARM NanoPi R1S H5"; + compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; + + aliases { + ethernet0 = &emac; + ethernet1 = &rtl8189etv; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; + }; + }; + + r-gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; + gpios-states = <0x1>; + states = <1100000 0x0>, <1300000 0x1>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + post-power-on-delay-ms = <200>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpux>; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "microchip,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8189etv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A port's VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 50815867ce7b..30d396e8c762 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -271,6 +271,15 @@ }; }; + timer@3009000 { + compatible = "allwinner,sun50i-h6-timer", + "allwinner,sun8i-a23-timer"; + reg = <0x03009000 0xa0>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + watchdog: watchdog@30090a0 { compatible = "allwinner,sun50i-h6-wdt", "allwinner,sun6i-a31-wdt"; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index a58ccecfcb55..faa0a79a34f5 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 895c43c7af9f..3f5254eeb47b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1871,6 +1871,7 @@ status = "disabled"; clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; clock-names = "xtal", "pclk", "baud"; + fifo-size = <128>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 793d48f72390..00c6f53290d4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2317,6 +2317,7 @@ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; + fifo-size = <128>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3d00404aae0f..6b457b2c30a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -301,6 +301,7 @@ reg = <0x0 0x84c0 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; + fifo-size = <128>; }; uart_B: serial@84dc { diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 66d67524b031..3cf4ecb6d52e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -171,11 +171,16 @@ sound { compatible = "amlogic,axg-sound-card"; model = "KHADAS-VIM3"; - audio-aux-devs = <&tdmout_a>; + audio-aux-devs = <&tdmin_a>, <&tdmout_a>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", "TDMOUT_A IN 1", "FRDDR_B OUT 0", "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT"; + "TDM_A Playback", "TDMOUT_A OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -198,8 +203,20 @@ sound-dai = <&frddr_c>; }; - /* 8ch hdmi interface */ dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { sound-dai = <&tdmif_a>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; @@ -214,7 +231,7 @@ }; /* hdmi glue */ - dai-link-4 { + dai-link-7 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { @@ -454,10 +471,26 @@ status = "okay"; }; +&tdmin_a { + status = "okay"; +}; + &tdmout_a { status = "okay"; }; +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + &tohdmitx { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts new file mode 100644 index 000000000000..effaa138b5f9 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -0,0 +1,646 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-m5", "amlogic,sm1"; + model = "Banana Pi BPI-M5"; + + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + key { + label = "SW3"; + linux,code = <BTN_3>; + press-threshold-microvolt = <1700000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* TOFIX: handle CVBS_DET on SARADC channel 0 */ + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "SW1"; + linux,code = <BTN_1>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio_c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + /* USB Hub Power Enable */ + vl_pwr_en: regulator-vl_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "VL_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M5"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + /* i2s jack output interface */ + dai-link-7 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + /* hdmi glue */ + dai-link-8 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + /* acodec glue */ + dai-link-9 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddao_1v8>; + status = "okay"; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "ETH_MDIO", /* GPIOZ_0 */ + "ETH_MDC", /* GPIOZ_1 */ + "ETH_RXCLK", /* GPIOZ_2 */ + "ETH_RX_DV", /* GPIOZ_3 */ + "ETH_RXD0", /* GPIOZ_4 */ + "ETH_RXD1", /* GPIOZ_5 */ + "ETH_RXD2", /* GPIOZ_6 */ + "ETH_RXD3", /* GPIOZ_7 */ + "ETH_TXCLK", /* GPIOZ_8 */ + "ETH_TXEN", /* GPIOZ_9 */ + "ETH_TXD0", /* GPIOZ_10 */ + "ETH_TXD1", /* GPIOZ_11 */ + "ETH_TXD2", /* GPIOZ_12 */ + "ETH_TXD3", /* GPIOZ_13 */ + "ETH_INTR", /* GPIOZ_14 */ + "ETH_NRST", /* GPIOZ_15 */ + /* GPIOH */ + "HDMI_SDA", /* GPIOH_0 */ + "HDMI_SCL", /* GPIOH_1 */ + "HDMI_HPD", /* GPIOH_2 */ + "HDMI_CEC", /* GPIOH_3 */ + "VL-RST_N", /* GPIOH_4 */ + "CON1-P36", /* GPIOH_5 */ + "VL-PWREN", /* GPIOH_6 */ + "WiFi_3V3_1V8", /* GPIOH_7 */ + "TFLASH_VDD_EN", /* GPIOH_8 */ + /* BOOT */ + "eMMC_D0", /* BOOT_0 */ + "eMMC_D1", /* BOOT_1 */ + "eMMC_D2", /* BOOT_2 */ + "eMMC_D3", /* BOOT_3 */ + "eMMC_D4", /* BOOT_4 */ + "eMMC_D5", /* BOOT_5 */ + "eMMC_D6", /* BOOT_6 */ + "eMMC_D7", /* BOOT_7 */ + "eMMC_CLK", /* BOOT_8 */ + "", + "eMMC_CMD", /* BOOT_10 */ + "", + "eMMC_RST#", /* BOOT_12 */ + "eMMC_DS", /* BOOT_13 */ + /* GPIOC */ + "SD_D0_B", /* GPIOC_0 */ + "SD_D1_B", /* GPIOC_1 */ + "SD_D2_B", /* GPIOC_2 */ + "SD_D3_B", /* GPIOC_3 */ + "SD_CLK_B", /* GPIOC_4 */ + "SD_CMD_B", /* GPIOC_5 */ + "CARD_EN_DET", /* GPIOC_6 */ + "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "CON1-P27", /* GPIOA_14 */ + "CON1-P28", /* GPIOA_15 */ + /* GPIOX */ + "CON1-P16", /* GPIOX_0 */ + "CON1-P18", /* GPIOX_1 */ + "CON1-P22", /* GPIOX_2 */ + "CON1-P11", /* GPIOX_3 */ + "CON1-P13", /* GPIOX_4 */ + "CON1-P07", /* GPIOX_5 */ + "CON1-P33", /* GPIOX_6 */ + "CON1-P15", /* GPIOX_7 */ + "CON1-P19", /* GPIOX_8 */ + "CON1-P21", /* GPIOX_9 */ + "CON1-P24", /* GPIOX_10 */ + "CON1-P23", /* GPIOX_11 */ + "CON1-P08", /* GPIOX_12 */ + "CON1-P10", /* GPIOX_13 */ + "CON1-P29", /* GPIOX_14 */ + "CON1-P31", /* GPIOX_15 */ + "CON1-P26", /* GPIOX_16 */ + "CON1-P03", /* GPIOX_17 */ + "CON1-P05", /* GPIOX_18 */ + "CON1-P32"; /* GPIOX_19 */ + + /* + * WARNING: The USB Hub on the BPI-M5 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "DEBUG TX", /* GPIOAO_0 */ + "DEBUG RX", /* GPIOAO_1 */ + "SYS_LED2", /* GPIOAO_2 */ + "UPDATE_KEY", /* GPIOAO_3 */ + "CON1-P40", /* GPIOAO_4 */ + "IR_IN", /* GPIOAO_5 */ + "TF_3V3N_1V8_EN", /* GPIOAO_6 */ + "CON1-P35", /* GPIOAO_7 */ + "CON1-P12", /* GPIOAO_8 */ + "CON1-P37", /* GPIOAO_9 */ + "CON1-P38", /* GPIOAO_10 */ + "SYS_LED", /* GPIOAO_11 */ + /* GPIOE */ + "VDDEE_PWM", /* GPIOE_0 */ + "VDDCPU_PWM", /* GPIOE_1 */ + "TF_PWR_EN"; /* GPIOE_2 */ +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + /* TOFIX: SD card is barely usable in SDR modes */ + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&vddio_c>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&vl_pwr_en>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 06de0b1ce726..f2c098143594 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -32,6 +32,19 @@ regulator-boot-on; regulator-always-on; }; + + sound { + model = "G12B-KHADAS-VIM3L"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 13", "TDM_A Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT"; + }; }; &cpu0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index 8c327c03d845..8c30ce63686e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -23,18 +23,6 @@ }; }; - hub_5v: regulator-hub_5v { - compatible = "regulator-fixed"; - regulator-name = "HUB_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the Hub CHIPENABLE, LOW sets low power state */ - gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - sound { model = "ODROID-C4"; }; @@ -58,8 +46,3 @@ &ir { linux,rc-map-name = "rc-odroid"; }; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&hub_5v>; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts index bf15700c4b15..f3f953225bf5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -44,6 +44,32 @@ }; }; + /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ + p12v_0: regulator-p12v_0 { + compatible = "regulator-fixed"; + regulator-name = "P12V_0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ + p12v_1: regulator-p12v_1 { + compatible = "regulator-fixed"; + regulator-name = "P12V_1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + sound { model = "ODROID-HC4"; }; @@ -90,7 +116,25 @@ status = "disabled"; }; +&spifc { + status = "okay"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + &usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; +}; + +&usb2_phy0 { + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index d14716b3d0f1..fd0ad85c165b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -46,8 +46,13 @@ regulator-name = "TF_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; - gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>; gpios-states = <0>; states = <3300000 0>, @@ -78,6 +83,8 @@ regulator-max-microvolt = <5000000>; regulator-always-on; vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; }; vcc_1v8: regulator-vcc_1v8 { diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index c309517abae3..3d8b1f4f2001 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -401,6 +401,16 @@ status = "disabled"; }; + toacodec: audio-controller@740 { + compatible = "amlogic,sm1-toacodec", + "amlogic,g12a-toacodec"; + reg = <0x0 0x740 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOACODEC"; + resets = <&clkc_audio AUD_RESET_TOACODEC>; + status = "disabled"; + }; + tohdmitx: audio-controller@744 { compatible = "amlogic,sm1-tohdmitx", "amlogic,g12a-tohdmitx"; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 1cc7fdcec51b..8e7a66943b01 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -568,13 +568,13 @@ clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: scpi-dvfs { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>, <1>, <2>; clock-output-names = "atlclk", "aplclk","gpuclk"; }; - scpi_clk: scpi-clk { + scpi_clk: clocks-1 { compatible = "arm,scpi-variable-clocks"; #clock-cells = <1>; clock-indices = <3>; @@ -582,7 +582,7 @@ }; }; - scpi_devpd: scpi-power-domains { + scpi_devpd: power-controller { compatible = "arm,scpi-power-domains"; num-domains = <2>; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 998e240aa698..11eae3e3a944 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ + bcm2711-rpi-4-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts new file mode 100644 index 000000000000..b9000f58beb5 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-400.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 8060178b365d..a5a64d17d9ea 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -306,7 +306,7 @@ interrupt-names = "nand"; status = "okay"; - nandcs: nandcs@0 { + nandcs: nand@0 { compatible = "brcm,nandcs"; reg = <0>; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 2ffb2c92182a..7b04dfe67bef 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -470,7 +470,7 @@ status = "disabled"; }; - uart0: uart@100000 { + uart0: serial@100000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00100000 0x1000>; @@ -481,7 +481,7 @@ status = "disabled"; }; - uart1: uart@110000 { + uart1: serial@110000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00110000 0x1000>; @@ -492,7 +492,7 @@ status = "disabled"; }; - uart2: uart@120000 { + uart2: serial@120000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00120000 0x1000>; @@ -503,7 +503,7 @@ status = "disabled"; }; - uart3: uart@130000 { + uart3: serial@130000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00130000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 773d9abe3a44..cbcc01a66aab 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -391,6 +391,7 @@ interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; samsung,s2mps11-wrstbi-ground; + wakeup-source; s2mps13_osc: clocks { compatible = "samsung,s2mps13-clk"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 44890d56c194..25806c4924cb 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts index 6290e2f9de6a..e8562585d4ac 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts @@ -24,6 +24,10 @@ status = "okay"; }; +&pcie1 { + status = "okay"; +}; + &qspi { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 9058cfa4980f..50a72cda4727 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -238,35 +238,35 @@ "fsl,sec-v4.0-rtic"; #address-cells = <1>; #size-cells = <1>; - reg = <0x60000 0x100 0x60e00 0x18>; + reg = <0x60000 0x100>, <0x60e00 0x18>; ranges = <0x0 0x60100 0x500>; rtic_a: rtic-a@0 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x100>; + reg = <0x00 0x20>, <0x100 0x100>; }; rtic_b: rtic-b@20 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x100>; + reg = <0x20 0x20>, <0x200 0x100>; }; rtic_c: rtic-c@40 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x100>; + reg = <0x40 0x20>, <0x300 0x100>; }; rtic_d: rtic-d@60 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x400 0x100>; + reg = <0x60 0x20>, <0x400 0x100>; }; }; }; @@ -522,8 +522,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 0x4>, /* controller interrupt */ <0 117 0x4>; /* PME interrupt */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9322c6ad8e4a..d7b527272500 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -275,6 +275,10 @@ status = "okay"; }; +&optee { + status = "okay"; +}; + &sai4 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index a30249ebffa8..b2e3e5d2a108 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -88,7 +88,7 @@ }; firmware { - optee { + optee: optee { compatible = "linaro,optee-tz"; method = "smc"; status = "disabled"; @@ -617,8 +617,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1028a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ @@ -644,8 +644,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1028a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -990,19 +990,19 @@ msi-map = <0 &its 0x17 0xe>; iommu-map = <0 &smmu 0x17 0xe>; /* PF0-6 BAR0 - non-prefetchable memory */ - ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 /* PF0-6 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 /* PF0: VF0-1 BAR0 - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 /* PF0: VF0-1 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 /* PF1: VF0-1 BAR0 - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 /* PF1: VF0-1 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000 + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 /* BAR4 (PF5) - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>; + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; enetc_port0: ethernet@0,0 { compatible = "fsl,enetc"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 28c51e521cb2..01b01e320411 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -869,8 +869,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 0x4>, /* controller interrupt */ <0 117 0x4>; /* PME interrupt */ @@ -895,8 +895,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 128 0x4>, <0 127 0x4>; @@ -921,8 +921,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 162 0x4>, <0 161 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 39458305e333..687fea6d8afa 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -773,8 +773,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -799,8 +799,8 @@ pcie_ep1: pcie_ep@3400000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; - reg = <0x00 0x03400000 0x0 0x00100000 - 0x40 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03400000 0x0 0x00100000>, + <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; @@ -809,8 +809,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -835,8 +835,8 @@ pcie_ep2: pcie_ep@3500000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; - reg = <0x00 0x03500000 0x0 0x00100000 - 0x48 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03500000 0x0 0x00100000>, + <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; @@ -845,8 +845,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -871,8 +871,8 @@ pcie_ep3: pcie_ep@3600000 { compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03600000 0x0 0x00100000 - 0x50 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03600000 0x0 0x00100000>, + <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 8ffbc9fde041..2fa6cfbef01f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -536,8 +536,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -562,8 +562,8 @@ pcie_ep1: pcie-ep@3400000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03400000 0x0 0x00100000 - 0x20 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03400000 0x0 0x00100000>, + <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <24>; num-ob-windows = <256>; @@ -573,8 +573,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -599,8 +599,8 @@ pcie_ep2: pcie-ep@3500000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03500000 0x0 0x00100000 - 0x28 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03500000 0x0 0x00100000>, + <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <6>; @@ -609,8 +609,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -635,8 +635,8 @@ pcie_ep3: pcie-ep@3600000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03600000 0x0 0x00100000 - 0x30 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03600000 0x0 0x00100000>, + <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <6>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 76ab68d2de0b..6f6667b70028 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -120,32 +120,32 @@ }; &pcie1 { - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x10 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie2 { - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x12 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie3 { - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x14 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie4 { - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x16 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index da24dc127698..c3dc38188c17 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -121,8 +121,8 @@ &pcie1 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; @@ -130,8 +130,8 @@ &pcie2 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; @@ -139,8 +139,8 @@ &pcie3 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; @@ -148,8 +148,8 @@ &pcie4 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x38 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 135ac8210871..801ba9612d36 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -929,7 +929,6 @@ QORIQ_CLK_PLL_DIV(4)>; clock-names = "dspi"; spi-num-chipselects = <5>; - bus-num = <0>; }; esdhc: esdhc@2140000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 0551f6f4c313..c4b1a59ba424 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1089,8 +1089,8 @@ pcie1: pcie@3400000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1117,8 +1117,8 @@ pcie2: pcie@3500000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1145,8 +1145,8 @@ pcie3: pcie@3600000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x90 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1173,8 +1173,8 @@ pcie4: pcie@3700000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x98 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1201,8 +1201,8 @@ pcie5: pcie@3800000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ - 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */ + <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1229,8 +1229,8 @@ pcie6: pcie@3900000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ - 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */ + <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index e1e81ca0ca69..a79f42a9618e 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -77,9 +77,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, <&enet0_lpcg IMX_LPCG_CLK_2>, - <&enet0_lpcg IMX_LPCG_CLK_1>, + <&enet0_lpcg IMX_LPCG_CLK_3>, <&enet0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <250000000>, <125000000>; fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; power-domains = <&pd IMX_SC_R_ENET_0>; @@ -94,9 +97,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, <&enet1_lpcg IMX_LPCG_CLK_2>, - <&enet1_lpcg IMX_LPCG_CLK_1>, + <&enet1_lpcg IMX_LPCG_CLK_3>, <&enet1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <250000000>, <125000000>; fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; power-domains = <&pd IMX_SC_R_ENET_1>; @@ -152,15 +158,19 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, - <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; - clock-output-names = "enet0_ipg_root_clk", - "enet0_tx_clk", - "enet0_ahb_clk", - "enet0_ipg_clk", - "enet0_ipg_s_clk"; + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_lpcg_timer_clk", + "enet0_lpcg_txc_sampling_clk", + "enet0_lpcg_ahb_clk", + "enet0_lpcg_rgmii_txc_clk", + "enet0_lpcg_ipg_clk", + "enet0_lpcg_ipg_s_clk"; power-domains = <&pd IMX_SC_R_ENET_0>; }; @@ -170,15 +180,19 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, - <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; - clock-output-names = "enet1_ipg_root_clk", - "enet1_tx_clk", - "enet1_ahb_clk", - "enet1_ipg_clk", - "enet1_ipg_s_clk"; + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_lpcg_timer_clk", + "enet1_lpcg_txc_sampling_clk", + "enet1_lpcg_ahb_clk", + "enet1_lpcg_rgmii_txc_clk", + "enet1_lpcg_ipg_clk", + "enet1_lpcg_ipg_s_clk"; power-domains = <&pd IMX_SC_R_ENET_1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 6518f088b2c2..e033d0257b5a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -314,6 +314,7 @@ srp-disable; adp-disable; usb-role-switch; + disable-over-current; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts new file mode 100644 index 000000000000..5a1e9df39bec --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -0,0 +1,1019 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7901 i.MX8MM board"; + compatible = "gw,imx8mm-gw7901", "fsl,imx8mm"; + + aliases { + ethernet0 = &fec1; + ethernet1 = &lan1; + ethernet2 = &lan2; + ethernet3 = &lan3; + ethernet4 = &lan4; + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led01_red"; + gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led01_grn"; + gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led02_red"; + gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led02_grn"; + gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led03_red"; + gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led03_grn"; + gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led04_red"; + gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led04_grn"; + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led05_red"; + gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led05_grn"; + gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-a { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led06_red"; + gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led06_grn"; + gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-ioexp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ioexp>; + compatible = "regulator-fixed"; + regulator-name = "ioexp"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator-isouart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_isouart>; + compatible = "regulator-fixed"; + regulator-name = "iso_uart"; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb2_vbus: regulator-usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + compatible = "regulator-fixed"; + regulator-name = "usb_usb2_vbus"; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wifi"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + status = "okay"; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin_aux1"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_aux2"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_0p95"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_arm"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p2"; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + leds_gpio: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + switch: switch@5f { + compatible = "microchip,ksz9897"; + reg = <0x5f>; + pinctrl-0 = <&pinctrl_ksz>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "rgmii-id"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan2: port@1 { + reg = <1>; + label = "lan2"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan3: port@2 { + reg = <2>; + label = "lan3"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan4: port@3 { + reg = <3>; + label = "lan4"; + local-mac-address = [00 00 00 00 00 00]; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + crypto@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; + cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */ + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_ksz: kszgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + + pinctrl_reg_isouart: regisouartgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 + >; + }; + + pinctrl_reg_ioexp: regioexpgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 + >; + }; + + pinctrl_reg_usb2: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140 + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140 + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */ + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140 + >; + }; + + pinctrl_uart4_gpio: uart4gpiogrp { + fsl,pins = < + + MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */ + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&cpu_alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; +}; + +&cpu_crit0 { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index a27e02bee6b4..e7648c3b8390 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -261,6 +261,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; nvmem-cells = <&imx8mm_uid>; nvmem-cell-names = "soc_unique_id"; @@ -271,117 +272,125 @@ #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI1_IPG>, - <&clk IMX8MM_CLK_SAI1_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + spba2: spba-bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai2: sai@30020000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30020000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI2_IPG>, - <&clk IMX8MM_CLK_SAI2_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai2: sai@30020000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai3: sai@30030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30030000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI3_IPG>, - <&clk IMX8MM_CLK_SAI3_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai5: sai@30050000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30050000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, - <&clk IMX8MM_CLK_SAI5_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai5: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai6: sai@30060000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30060000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI6_IPG>, - <&clk IMX8MM_CLK_SAI6_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai6: sai@30060000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - micfil: audio-controller@30080000 { - compatible = "fsl,imx8mm-micfil"; - reg = <0x30080000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_PDM_IPG>, - <&clk IMX8MM_CLK_PDM_ROOT>, - <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>, - <&clk IMX8MM_CLK_EXT3>; - clock-names = "ipg_clk", "ipg_clk_app", - "pll8k", "pll11k", "clkext3"; - dmas = <&sdma2 24 25 0x80000000>; - dma-names = "rx"; - status = "disabled"; - }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; - spdif1: spdif@30090000 { - compatible = "fsl,imx35-spdif"; - reg = <0x30090000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ - <&clk IMX8MM_CLK_24M>, /* rxtx0 */ - <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MM_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; gpio1: gpio@30200000 { @@ -670,80 +679,88 @@ ranges = <0x30800000 0x30800000 0x400000>, <0x8000000 0x8000000 0x10000000>; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + spba1: spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, - <&clk IMX8MM_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, - <&clk IMX8MM_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, - <&clk IMX8MM_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART1_ROOT>, - <&clk IMX8MM_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART3_ROOT>, - <&clk IMX8MM_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART2_ROOT>, - <&clk IMX8MM_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index c35eeaff958f..54eaf3d6055b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -120,6 +120,9 @@ interrupt-parent = <&gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; regulators { buck1_reg: BUCK1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index a0dddba2e561..85e65f8719ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -193,6 +193,7 @@ srp-disable; adp-disable; usb-role-switch; + disable-over-current; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 4dac4da38f4c..d4231e061403 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -245,6 +245,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; nvmem-cells = <&imx8mn_uid>; nvmem-cell-names = "soc_unique_id"; @@ -255,7 +256,7 @@ #size-cells = <1>; ranges; - spba: spba-bus@30000000 { + spba2: spba-bus@30000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -681,80 +682,88 @@ #size-cells = <1>; ranges; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + spba1: spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, - <&clk IMX8MN_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, - <&clk IMX8MN_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, + <&clk IMX8MN_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, - <&clk IMX8MN_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, + <&clk IMX8MN_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART1_ROOT>, - <&clk IMX8MN_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, + <&clk IMX8MN_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART3_ROOT>, - <&clk IMX8MN_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART1_ROOT>, + <&clk IMX8MN_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART2_ROOT>, - <&clk IMX8MN_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart3: serial@30880000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART3_ROOT>, + <&clk IMX8MN_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART2_ROOT>, + <&clk IMX8MN_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 2c28e589677e..7b99fad6e4d6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -81,6 +81,26 @@ status = "disabled";/* can2 pin conflict with pdm */ }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + }; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; @@ -104,6 +124,92 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1025000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1045000>; + regulator-max-microvolt = <1155000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &i2c3 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -177,6 +283,26 @@ }; &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19 + >; + }; + pinctrl_fec: fecgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 @@ -229,6 +355,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 @@ -236,6 +369,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index f3965ec5b31d..aa78e0d8c72b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -65,6 +65,20 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + som_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -217,6 +231,17 @@ >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c2d51a46cb3c..9f7c7f587d38 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -37,6 +37,7 @@ serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; + spi0 = &flexspi; }; cpus { @@ -407,7 +408,6 @@ <&clk IMX8MP_CLK_GIC>, <&clk IMX8MP_CLK_AUDIO_AHB>, <&clk IMX8MP_CLK_AUDIO_AXI_SRC>, - <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, @@ -423,7 +423,6 @@ <500000000>, <400000000>, <800000000>, - <400000000>, <393216000>, <361267200>; }; @@ -761,6 +760,21 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + compatible = "nxp,imx8mp-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_QSPI_ROOT>, + <&clk IMX8MP_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_QSPI>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 85b045253a0e..4d2035e3dd7c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -318,6 +318,7 @@ <&clk IMX8MQ_CLK_PCIE1_PHY>, <&pcie0_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 81d269296610..f70fb32b96b0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -34,6 +34,30 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&ddc_i2c_bus>; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <<8912_out>; + }; + }; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_0v9: regulator-vref-0v9 { compatible = "regulator-fixed"; regulator-name = "vref-0v9"; @@ -70,6 +94,9 @@ }; }; +&dphy { + status = "okay"; +}; &fec1 { pinctrl-names = "default"; @@ -91,6 +118,15 @@ }; }; +/* Release reset of the USB Host HUB */ +&gpio1 { + usb-host-reset-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -174,6 +210,98 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pca9546: i2cmux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c4@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48> ; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8912_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c4@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; + + i2c4@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + max7323: gpio-expander@68 { + compatible = "maxim,max7323"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7323>; + gpio-controller; + reg = <0x68>; + #gpio-cells = <2>; + }; + }; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&hdmi_out_in>; + }; + }; + }; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -190,6 +318,29 @@ status = "okay"; }; +&usb_dwc3_0 { + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_0>; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_1>; + status = "okay"; +}; + &usdhc1 { assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; assigned-clock-rates = <400000000>; @@ -321,6 +472,19 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_max7323: max7323grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 + >; + }; + pinctrl_reg_arm_dram: reg-arm-dramgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 @@ -339,6 +503,12 @@ >; }; + pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 @@ -353,6 +523,18 @@ >; }; + pinctrl_usb3_0: usb3-0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16 + >; + }; + + pinctrl_usb3_1: usb3-1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 17c449e12c2e..91df9c5350ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1383,6 +1383,14 @@ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; }; @@ -1413,6 +1421,14 @@ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi index d607f2f6698c..79a55a0fa2f1 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi @@ -3,7 +3,7 @@ /* * dtsi for Hisilicon Hi3660 Coresight * - * Copyright (C) 2016-2018 Hisilicon Ltd. + * Copyright (C) 2016-2018 HiSilicon Ltd. * * Author: Wanglai Shi <shiwanglai@hisilicon.com> * diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 963300eede17..f68580dc87d8 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -2,7 +2,7 @@ /* * dts file for Hisilicon HiKey960 Development Board * - * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2016, HiSilicon Ltd. * */ diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index cab89dc6f596..f1ec87c05842 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -2,7 +2,7 @@ /* * dts file for Hisilicon Hi3660 SoC * - * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2016, HiSilicon Ltd. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 7f9f9886c349..d8abf442ee7e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -2,7 +2,7 @@ /* * dts file for Hisilicon HiKey970 Development Board * - * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2016, HiSilicon Ltd. * Copyright (C) 2018, Linaro Ltd. * */ diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 8830795c8efc..20698cfd0637 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -2,7 +2,7 @@ /* * dts file for Hisilicon Hi3670 SoC * - * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2016, HiSilicon Ltd. * Copyright (C) 2018, Linaro Ltd. */ diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi index 7b3010f448c5..3f387f4cf5e0 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -2,7 +2,7 @@ /* * dtsi file for Hisilicon Hi6220 coresight * - * Copyright (C) 2017 Hisilicon Ltd. + * Copyright (C) 2017 HiSilicon Ltd. * * Author: Pengcheng Li <lipengcheng8@huawei.com> * Leo Yan <leo.yan@linaro.org> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 91d08673c02e..3df2afb2f637 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -2,7 +2,7 @@ /* * dts file for Hisilicon HiKey Development Board * - * Copyright (C) 2015, Hisilicon Ltd. + * Copyright (C) 2015, HiSilicon Ltd. * */ diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index d426c6c8722b..dde9371dc545 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -2,7 +2,7 @@ /* * dts file for Hisilicon Hi6220 SoC * - * Copyright (C) 2015, Hisilicon Ltd. + * Copyright (C) 2015, HiSilicon Ltd. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index 369b69b17b91..40f3e00ac832 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D02 Development Board * - * Copyright (C) 2014,2015 Hisilicon Ltd. + * Copyright (C) 2014,2015 HiSilicon Ltd. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 4aed8d440b3a..7b2abd10d3d6 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D02 Development Board * - * Copyright (C) 2014,2015 Hisilicon Ltd. + * Copyright (C) 2014,2015 HiSilicon Ltd. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 9f4a930e734d..35af5d3821e8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D03 Development Board * - * Copyright (C) 2016 Hisilicon Ltd. + * Copyright (C) 2016 HiSilicon Ltd. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 7deca5f763d5..70d7732dd348 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D03 Development Board * - * Copyright (C) 2016 Hisilicon Ltd. + * Copyright (C) 2016 HiSilicon Ltd. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index 81a2312c8a26..c3df67845f03 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D05 Development Board * - * Copyright (C) 2016 Hisilicon Ltd. + * Copyright (C) 2016 HiSilicon Ltd. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 2172d8071181..6baf6a686450 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -2,7 +2,7 @@ /** * dts file for Hisilicon D05 Development Board * - * Copyright (C) 2016 Hisilicon Ltd. + * Copyright (C) 2016 HiSilicon Ltd. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 53e817c5f6f3..ce2bcddf396f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -109,10 +109,8 @@ }; firmware { - turris-mox-rwtm { - compatible = "cznic,turris-mox-rwtm"; - mboxes = <&rwtm 0>; - status = "okay"; + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm"; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 6ffbb099fcac..5db81a416cd6 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -504,4 +504,12 @@ }; }; }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi index d9bbbfa4b4eb..4a23f65d475f 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -29,6 +29,7 @@ }; &ap_sdhci0 { - compatible = "marvell,armada-ap807-sdhci"; + compatible = "marvell,armada-ap807-sdhci", + "marvell,armada-ap806-sdhci"; /* Backward compatibility */ }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts index 2c2af001619b..9758609541c7 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -260,7 +260,7 @@ }; partition@200000 { label = "Linux"; - reg = <0x200000 0xd00000>; + reg = <0x200000 0xe00000>; }; partition@1000000 { label = "Filesystem"; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index a1c50adc98fa..4f68ebed2e31 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -13,8 +13,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-burnet.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku6.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 1c5639ead622..9029051624a6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/mt8167-clk.h> #include <dt-bindings/memory/mt8167-larb-port.h> +#include <dt-bindings/power/mt8167-power.h> #include "mt8167-pinfunc.h" @@ -34,6 +35,73 @@ #clock-cells = <1>; }; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + spm: power-controller { + compatible = "mediatek,mt8167-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8167_POWER_DOMAIN_MM { + reg = <MT8167_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_SMI_MM>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT8167_POWER_DOMAIN_VDEC { + reg = <MT8167_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_SMI_MM>, + <&topckgen CLK_TOP_RG_VDEC>; + clock-names = "mm", "vdec"; + #power-domain-cells = <0>; + }; + + power-domain@MT8167_POWER_DOMAIN_ISP { + reg = <MT8167_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_SMI_MM>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + + power-domain@MT8167_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8167_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&topckgen CLK_TOP_RG_AXI_MFG>, + <&topckgen CLK_TOP_RG_SLOW_MFG>; + clock-names = "axi_mfg", "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + mediatek,infracfg = <&infracfg>; + + power-domain@MT8167_POWER_DOMAIN_MFG_2D { + reg = <MT8167_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8167_POWER_DOMAIN_MFG { + reg = <MT8167_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + + power-domain@MT8167_POWER_DOMAIN_CONN { + reg = <MT8167_POWER_DOMAIN_CONN>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + imgsys: syscon@15000000 { compatible = "mediatek,mt8167-imgsys", "syscon"; reg = <0 0x15000000 0 0x1000>; @@ -57,5 +125,58 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; }; + + mmsys: mmsys@14000000 { + compatible = "mediatek,mt8167-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + smi_common: smi@14017000 { + compatible = "mediatek,mt8167-smi-common"; + reg = <0 0x14017000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8167_POWER_DOMAIN_MM>; + }; + + larb0: larb@14016000 { + compatible = "mediatek,mt8167-smi-larb"; + reg = <0 0x14016000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8167_POWER_DOMAIN_MM>; + }; + + larb1: larb@15001000 { + compatible = "mediatek,mt8167-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_LARB1_SMI>, + <&imgsys CLK_IMG_LARB1_SMI>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8167_POWER_DOMAIN_ISP>; + }; + + larb2: larb@16010000 { + compatible = "mediatek,mt8167-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB1_CKEN>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>; + }; + + iommu: m4u@10203000 { + compatible = "mediatek,mt8167-m4u"; + reg = <0 0x10203000 0 0x1000>; + mediatek,larbs = <&larb0 &larb1 &larb2>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>; + #iommu-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 003a5653c505..22f271b1f5b0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1459,14 +1459,11 @@ clock-names = "apb", "smi"; }; - vcodec_enc: vcodec@18002000 { + vcodec_enc_avc: vcodec@18002000 { compatible = "mediatek,mt8173-vcodec-enc"; - reg = <0 0x18002000 0 0x1000>, /* VENC_SYS */ - <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb3>, - <&larb5>; + reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */ + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_VENC_RCPU>, <&iommu M4U_PORT_VENC_REC>, <&iommu M4U_PORT_VENC_BSDMA>, @@ -1477,29 +1474,12 @@ <&iommu M4U_PORT_VENC_REF_LUMA>, <&iommu M4U_PORT_VENC_REF_CHROMA>, <&iommu M4U_PORT_VENC_NBM_RDMA>, - <&iommu M4U_PORT_VENC_NBM_WDMA>, - <&iommu M4U_PORT_VENC_RCPU_SET2>, - <&iommu M4U_PORT_VENC_REC_FRM_SET2>, - <&iommu M4U_PORT_VENC_BSDMA_SET2>, - <&iommu M4U_PORT_VENC_SV_COMA_SET2>, - <&iommu M4U_PORT_VENC_RD_COMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, - <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, - <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; + <&iommu M4U_PORT_VENC_NBM_WDMA>; mediatek,vpu = <&vpu>; - clocks = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_UNIVPLL1_D2>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - clock-names = "venc_sel_src", - "venc_sel", - "venc_lt_sel_src", - "venc_lt_sel"; - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>, - <&topckgen CLK_TOP_VCODECPLL_370P5>; + clocks = <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "venc_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; }; jpegdec: jpegdec@18004000 { @@ -1531,5 +1511,27 @@ <&vencltsys CLK_VENCLT_CKE0>; clock-names = "apb", "smi"; }; + + vcodec_enc_vp8: vcodec@19002000 { + compatible = "mediatek,mt8173-vcodec-enc-vp8"; + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, + <&iommu M4U_PORT_VENC_REC_FRM_SET2>, + <&iommu M4U_PORT_VENC_BSDMA_SET2>, + <&iommu M4U_PORT_VENC_SV_COMA_SET2>, + <&iommu M4U_PORT_VENC_RD_COMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, + <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, + <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; + mediatek,larb = <&larb5>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = + <&topckgen CLK_TOP_VCODECPLL_370P5>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index edff1e03e6fe..7bc0a6a7fadf 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -42,6 +42,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&mt6358_vgpu_reg>; + sram-supply = <&mt6358_vsram_gpu_reg>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c_pins_0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts new file mode 100644 index 000000000000..a8d6f32ade8d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +/ { + model = "Google burnet board"; + compatible = "google,burnet", "mediatek,mt8183"; +}; + +&mt6358codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; + +&i2c0 { + touchscreen@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <200>; + hid-descr-addr = <0x0020>; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts new file mode 100644 index 000000000000..ef6257c9a2d2 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" + +/ { + model = "Google fennel sku1 board"; + compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183"; + + pwmleds { + compatible = "pwm-leds"; + keyboard_backlight: keyboard-backlight { + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&cros_ec_pwm { + status = "okay"; +}; + +&touchscreen { + status = "okay"; + + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts new file mode 100644 index 000000000000..899c2e42385c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" + +/ { + model = "Google fennel sku6 board"; + compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183"; +}; + +&touchscreen { + status = "okay"; + + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; +}; + + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi new file mode 100644 index 000000000000..bbe6c338f465 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +&mt6358codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; + +&i2c2 { + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts new file mode 100644 index 000000000000..e8c41f6b4b0d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" + +/ { + model = "Google fennel14 sku0 board"; + compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL14"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts new file mode 100644 index 000000000000..b3f46c16e5d7 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +/ { + model = "Google kappa board"; + compatible = "google,kappa", "mediatek,mt8183"; +}; + +&mt6358codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts new file mode 100644 index 000000000000..6f1aa692753a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-juniper.dtsi" + +/ { + model = "Google kenzo sku17 board"; + compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts new file mode 100644 index 000000000000..281265f082db --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-willow.dtsi" + +/ { + model = "Google willow board sku0"; + compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts new file mode 100644 index 000000000000..22e56bdc1ee3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-willow.dtsi" + +/ { + model = "Google willow board sku1"; + compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi new file mode 100644 index 000000000000..76d33540166f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +&i2c2 { + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_JUNIPER"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 4049dff8464b..d8826c82bcda 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -92,6 +92,14 @@ }; }; +&cros_ec { + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + status = "disabled"; + }; +}; + &dsi0 { status = "okay"; /delete-node/panel@0; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi index b442e38a3156..28966a65391b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -88,11 +88,13 @@ pinctrl-0 = <&i2c2_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcamio_reg>; eeprom@58 { compatible = "atmel,24c32"; reg = <0x58>; pagesize = <32>; + vcc-supply = <&mt6358_vcama2_reg>; }; }; @@ -101,11 +103,13 @@ pinctrl-0 = <&i2c4_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcn18_reg>; eeprom@54 { compatible = "atmel,24c32"; reg = <0x54>; pagesize = <32>; + vcc-supply = <&mt6358_vcn18_reg>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index 2f5234a16ead..3aa79403c0c2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -62,11 +62,13 @@ pinctrl-0 = <&i2c2_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcamio_reg>; eeprom@58 { compatible = "atmel,24c64"; reg = <0x58>; pagesize = <32>; + vcc-supply = <&mt6358_vcamio_reg>; }; }; @@ -75,11 +77,13 @@ pinctrl-0 = <&i2c4_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcn18_reg>; eeprom@54 { compatible = "atmel,24c64"; reg = <0x54>; pagesize = <32>; + vcc-supply = <&mt6358_vcn18_reg>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index fbc471ccf805..30c183c96a54 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -71,11 +71,13 @@ pinctrl-0 = <&i2c2_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcamio_reg>; eeprom@58 { compatible = "atmel,24c32"; reg = <0x58>; pagesize = <32>; + vcc-supply = <&mt6358_vcama2_reg>; }; }; @@ -84,11 +86,13 @@ pinctrl-0 = <&i2c4_pins>; status = "okay"; clock-frequency = <400000>; + vbus-supply = <&mt6358_vcn18_reg>; eeprom@54 { compatible = "atmel,24c32"; reg = <0x54>; pagesize = <32>; + vcc-supply = <&mt6358_vcn18_reg>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index ff56bcfa3370..ae549d55a94f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -279,6 +279,11 @@ }; }; +&gpu { + mali-supply = <&mt6358_vgpu_reg>; + sram-supply = <&mt6358_vsram_gpu_reg>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -816,6 +821,10 @@ compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; }; + + cbas { + compatible = "google,cros-cbas"; + }; }; }; @@ -847,6 +856,20 @@ status = "okay"; }; +&thermal_zones { + tboard1 { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor1>; + }; + + tboard2 { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor2>; + }; +}; + &u3phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index 0aff5eb52e88..ee912825cfc6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -68,6 +68,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&mt6358_vgpu_reg>; + sram-supply = <&mt6358_vsram_gpu_reg>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c_pins_0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index c5e822b6b77a..f90df6439c08 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -197,6 +197,91 @@ }; }; + gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <625000>, <850000>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + opp-microvolt = <631250>, <850000>; + }; + + opp-340000000 { + opp-hz = /bits/ 64 <340000000>; + opp-microvolt = <637500>, <850000>; + }; + + opp-360000000 { + opp-hz = /bits/ 64 <360000000>; + opp-microvolt = <643750>, <850000>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + opp-microvolt = <650000>, <850000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <656250>, <850000>; + }; + + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <662500>, <850000>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + opp-microvolt = <675000>, <850000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <687500>, <850000>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-microvolt = <700000>, <850000>; + }; + + opp-580000000 { + opp-hz = /bits/ 64 <580000000>; + opp-microvolt = <712500>, <850000>; + }; + + opp-620000000 { + opp-hz = /bits/ 64 <620000000>; + opp-microvolt = <725000>, <850000>; + }; + + opp-653000000 { + opp-hz = /bits/ 64 <653000000>; + opp-microvolt = <743750>, <850000>; + }; + + opp-698000000 { + opp-hz = /bits/ 64 <698000000>; + opp-microvolt = <768750>, <868750>; + }; + + opp-743000000 { + opp-hz = /bits/ 64 <743000000>; + opp-microvolt = <793750>, <893750>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <825000>, <925000>; + }; + }; + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupt-parent = <&gic>; @@ -673,7 +758,7 @@ nvmem-cell-names = "calibration-data"; }; - thermal-zones { + thermal_zones: thermal-zones { cpu_thermal: cpu_thermal { polling-delay-passive = <100>; polling-delay = <500>; @@ -1118,6 +1203,26 @@ #clock-cells = <1>; }; + gpu: gpu@13040000 { + compatible = "mediatek,mt8183-mali", "arm,mali-bifrost"; + reg = <0 0x13040000 0 0x4000>; + interrupts = + <GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "job", "mmu", "gpu"; + + clocks = <&topckgen CLK_TOP_MFGPLL_CK>; + + power-domains = + <&spm MT8183_POWER_DOMAIN_MFG_CORE0>, + <&spm MT8183_POWER_DOMAIN_MFG_CORE1>, + <&spm MT8183_POWER_DOMAIN_MFG_2D>; + power-domain-names = "core0", "core1", "core2"; + + operating-points-v2 = <&gpu_opp_table>; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; @@ -1263,13 +1368,14 @@ }; smi_common: smi@14019000 { - compatible = "mediatek,mt8183-smi-common", "syscon"; + compatible = "mediatek,mt8183-smi-common"; reg = <0 0x14019000 0 0x1000>; clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_GALS_COMM0>, <&mmsys CLK_MM_GALS_COMM1>; clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; }; imgsys: syscon@15020000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 683743f81849..74c1a5df3fdb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -817,7 +817,7 @@ }; hda@3510000 { - nvidia,model = "jetson-tx2-hda"; + nvidia,model = "NVIDIA Jetson TX2 HDA"; status = "okay"; }; @@ -1109,6 +1109,6 @@ <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>, <&dspk1_port>, <&dspk2_port>; - label = "jetson-tx2-ape"; + label = "NVIDIA Jetson TX2 APE"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 9f75bbf00cf7..d02f6bf3e2ca 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1082,7 +1082,7 @@ }; smmu: iommu@12000000 { - compatible = "arm,mmu-500"; + compatible = "nvidia,tegra186-smmu", "nvidia,smmu-500"; reg = <0 0x12000000 0 0x800000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, @@ -1152,6 +1152,8 @@ stream-match-mask = <0x7f80>; #global-interrupts = <1>; #iommu-cells = <1>; + + nvidia,memory-controller = <&mc>; }; host1x@13e00000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index d618f197a1d3..96bd01cadb18 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -554,7 +554,7 @@ }; hda@3510000 { - nvidia,model = "jetson-xavier-hda"; + nvidia,model = "NVIDIA Jetson AGX Xavier HDA"; status = "okay"; }; @@ -831,7 +831,7 @@ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; - label = "jetson-xavier-ape"; + label = "NVIDIA Jetson AGX Xavier APE"; widgets = "Microphone", "CVB-RT MIC Jack", diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index d1d77220154f..836a7e0a4267 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -15,6 +15,577 @@ interrupt-controller@2a40000 { status = "okay"; }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s5_port: port@18 { + reg = <0x18>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic4_port: port@1d { + reg = <0x1d>; + + xbar_dmic4_ep: endpoint { + remote-endpoint = <&dmic4_cif_ep>; + }; + }; + + xbar_dspk1_port: port@1e { + reg = <0x1e>; + + xbar_dspk1_ep: endpoint { + remote-endpoint = <&dspk1_cif_ep>; + }; + }; + + xbar_dspk2_port: port@1f { + reg = <0x1f>; + + xbar_dspk2_ep: endpoint { + remote-endpoint = <&dspk2_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic4_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic4_ep>; + }; + }; + + dmic4_port: port@1 { + reg = <1>; + + dmic4_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; }; ddc: i2c@3190000 { @@ -36,7 +607,7 @@ }; hda@3510000 { - nvidia,model = "jetson-xavier-nx-hda"; + nvidia,model = "NVIDIA Jetson Xavier NX HDA"; status = "okay"; }; @@ -265,6 +836,28 @@ regulator-boot-on; }; + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* XBAR Ports */ + <&xbar_i2s3_port>, <&xbar_i2s5_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>, + <&xbar_dspk1_port>, <&xbar_dspk2_port>, + /* BE I/O Ports */ + <&i2s3_port>, <&i2s5_port>, + <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, + <&dspk1_port>, <&dspk2_port>; + + label = "NVIDIA Jetson Xavier NX APE"; + }; + thermal-zones { cpu { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 9449156fae39..b7d532841390 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -62,6 +62,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>, <&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_EQOS>; status = "disabled"; snps,write-requests = <1>; @@ -733,6 +734,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>, <&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_SDMMC1>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = @@ -759,6 +761,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>, <&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_SDMMC3>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; @@ -790,6 +793,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>, <&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; @@ -821,6 +825,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>, <&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_HDA>; status = "disabled"; }; @@ -1300,6 +1305,84 @@ interrupt-controller; }; + smmu: iommu@12000000 { + compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; + reg = <0x12000000 0x800000>, + <0x11000000 0x800000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <2>; + #iommu-cells = <1>; + + nvidia,memory-controller = <&mc>; + status = "okay"; + }; + host1x@13e00000 { compatible = "nvidia,tegra194-host1x"; reg = <0x13e00000 0x10000>, @@ -1319,6 +1402,7 @@ ranges = <0x15000000 0x15000000 0x01000000>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>; interconnect-names = "dma-mem"; + iommus = <&smmu TEGRA194_SID_HOST1X>; display-hub@15200000 { compatible = "nvidia,tegra194-display"; @@ -1430,6 +1514,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>, <&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_VIC>; }; dpaux0: dpaux@155c0000 { @@ -2136,6 +2221,7 @@ <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>, <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>; interconnect-names = "read", "write", "dma-mem", "dma-write"; + iommus = <&smmu TEGRA194_SID_BPMP>; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; @@ -2345,6 +2431,20 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1 + &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>; + }; + psci { compatible = "arm,psci-1.0"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 497635af7fab..7d3e3634743e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -424,6 +424,6 @@ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; - label = "jetson-tx1-ape"; + label = "NVIDIA Jetson TX1 APE"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a9caaf7c0d67..d8409c1b4380 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1345,7 +1345,7 @@ }; hda@70030000 { - nvidia,model = "jetson-tx1-hda"; + nvidia,model = "NVIDIA Jetson TX1 HDA"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 14c128a5e248..7dbb13f20de7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -441,7 +441,7 @@ }; hda@70030000 { - nvidia,model = "jetson-nano-hda"; + nvidia,model = "NVIDIA Jetson Nano HDA"; status = "okay"; }; @@ -1043,6 +1043,6 @@ <&i2s3_port>, <&i2s4_port>, <&dmic1_port>, <&dmic2_port>; - label = "jetson-nano-ape"; + label = "NVIDIA Jetson Nano APE"; }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 456502aeee49..4f0597091976 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -5,8 +5,11 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb @@ -32,11 +35,12 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -51,6 +55,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb @@ -70,8 +76,13 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index defcbd15edf9..068692350e00 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -41,14 +41,14 @@ / { aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp2_uart2; - serial2 = &blsp1_uart1; - i2c0 = &blsp1_i2c2; + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c0; - spi0 = &blsp1_spi0; - spi1 = &blsp2_spi5; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; }; chosen { @@ -133,24 +133,24 @@ }; }; -&blsp1_i2c2 { +&blsp1_i2c3 { /* On Low speed expansion */ label = "LS-I2C0"; status = "okay"; }; -&blsp1_spi0 { +&blsp1_spi1 { /* On Low speed expansion */ label = "LS-SPI0"; status = "okay"; }; -&blsp1_uart1 { +&blsp1_uart2 { label = "BT-UART"; status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; bluetooth { compatible = "qcom,qca6174-bt"; @@ -162,7 +162,11 @@ }; }; -&blsp2_i2c0 { +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { /* On High speed expansion */ label = "HS-I2C2"; status = "okay"; @@ -174,32 +178,36 @@ status = "okay"; }; -&blsp2_spi5 { +&blsp2_spi6 { /* On High speed expansion */ label = "HS-SPI1"; status = "okay"; }; -&blsp2_uart1 { +&blsp2_uart2 { label = "LS-UART1"; status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; }; -&blsp2_uart2 { +&blsp2_uart3 { label = "LS-UART0"; status = "disabled"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; }; &camss { vdda-supply = <&vreg_l2a_1p25>; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; @@ -245,7 +253,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; -&msmgpio { +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { gpio-line-names = "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ @@ -424,7 +437,7 @@ }; }; - blsp1_uart1_default: blsp1_uart1_default { + blsp1_uart2_default: blsp1_uart2_default { mux { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "blsp_uart2"; @@ -437,7 +450,7 @@ }; }; - blsp1_uart1_sleep: blsp1_uart1_sleep { + blsp1_uart2_sleep: blsp1_uart2_sleep { mux { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "gpio"; @@ -505,20 +518,20 @@ &pcie0 { status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; @@ -929,9 +942,9 @@ &sdhc2 { /* External SD card */ pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; status = "okay"; @@ -1026,20 +1039,6 @@ }; }; -&spmi_bus { - pmic@0 { - pon@800 { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - }; -}; - &ufsphy { status = "okay"; @@ -1064,7 +1063,7 @@ status = "okay"; extcon = <&usb2_id>; - dwc3@7600000 { + usb@7600000 { extcon = <&usb2_id>; dr_mode = "otg"; maximum-speed = "high-speed"; @@ -1075,7 +1074,7 @@ status = "okay"; extcon = <&usb3_id>; - dwc3@6a00000 { + usb@6a00000 { extcon = <&usb3_id>; dr_mode = "otg"; }; @@ -1089,6 +1088,10 @@ }; +&venus { + status = "okay"; +}; + &wcd9335 { clock-names = "mclk", "slimbus"; clocks = <&div1_mclk>, diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index f6ddf17ada81..8c7a27e972b7 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -17,7 +17,7 @@ qcom,board-id = <0x00010018 0>; aliases { - serial0 = &blsp2_uart1; + serial0 = &blsp2_uart2; }; chosen { @@ -81,14 +81,22 @@ }; }; -&blsp2_uart1 { +&blsp2_uart2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; }; -&msmgpio { +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { sdc2_pins_default: sdc2-pins-default { clk { pins = "sdc2_clk"; @@ -352,7 +360,7 @@ bus-width = <4>; - cd-gpios = <&msmgpio 38 0x1>; + cd-gpios = <&tlmm 38 0x1>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; @@ -383,3 +391,7 @@ vdda-phy-max-microamp = <18380>; vdda-pll-max-microamp = <9440>; }; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts new file mode 100644 index 000000000000..2bfcf42aeabc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "ipq8074-hk10.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1"; + compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts new file mode 100644 index 000000000000..7da39f1d979b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; +/* Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ +#include "ipq8074-hk10.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2"; + compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi new file mode 100644 index 000000000000..07e670829676 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "ipq8074.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart5; + }; + + chosen { + stdout-path = "serial0"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x20000000>; + }; +}; + +&blsp1_spi1 { + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart5 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; + perst-gpio = <&tlmm 58 0x1>; +}; + +&pcie1 { + status = "ok"; + perst-gpio = <&tlmm 61 0x1>; +}; + +&pcie_phy0 { + status = "ok"; +}; + +&pcie_phy1 { + status = "ok"; +}; + +&qpic_bam { + status = "ok"; +}; + +&qpic_nand { + status = "ok"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a32e5e79ab0b..95d6cb8cd4c0 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -165,6 +165,7 @@ clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; }; pcie_phy0: phy@86000 { @@ -372,6 +373,21 @@ status = "disabled"; }; + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + dmas = <&blsp_dma 23>, <&blsp_dma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07984000 0x1a000>; @@ -427,7 +443,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: dwc3@8a00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; @@ -468,7 +484,7 @@ resets = <&gcc GCC_USB1_BCR>; status = "disabled"; - dwc_1: dwc3@8c00000 { + dwc_1: usb@8c00000 { compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 540b1fa4b260..670bd1bebd73 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -45,6 +45,24 @@ status = "okay"; }; +&blsp_i2c4 { + status = "okay"; + + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; +}; + &blsp_i2c5 { status = "okay"; @@ -281,6 +299,14 @@ bias-pull-up; }; + ts_int_reset_default: ts-int-reset-default { + pins = "gpio13", "gpio100"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default { pins = "gpio69"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts new file mode 100644 index 000000000000..e0075b574190 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2021 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/* + * Note: The original firmware from Huawei can only boot 32-bit kernels. + * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware + * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei + * forgot to set up (firmware) secure boot for some reason. + * + * Also note that Huawei no longer provides bootloader unlock codes. + * This can be bypassed by patching the bootloader from a custom HYP firmware, + * making it think the bootloader is unlocked. + * + * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + */ + +/ { + model = "Huawei Ascend G7"; + compatible = "huawei,g7", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + + led-0 { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + + led-1 { + gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + + led-2 { + gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + accelerometer@1e { + compatible = "kionix,kx023-1025"; + reg = <0x1e>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_irq_default>; + + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + proximity@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + led-max-microamp = <100000>; + amstaos,proximity-diodes = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&prox_irq_default>; + }; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + pinctrl-names = "default"; + pinctrl-0 = <®_lcd_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l16>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq_default>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; /* Allow sleeping */ + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; /* Touchscreen */ + }; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + + /* + * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * However, gpio38 does not change its state when inserting/removing the + * SD card, it's just low all the time. The Huawei kernel seems to use + * polling for SD card detection instead. + * + * However, looking closer at the GPIO debug output it turns out that + * gpio56 switches its state when inserting/removing the SD card. + * It behaves just like gpio38 normally does. Usually GPIO56 is used as + * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted. + * Maybe Huawei decided to replace the second SIM card slot with the + * SD card slot and forgot to re-route to gpio38. + */ + cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_irq_default: accel-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default { + pins = "gpio8", "gpio9", "gpio10"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio2", "gpio20", "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + prox_irq_default: prox-irq-default { + pins = "gpio113"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + reg_lcd_en_default: reg-lcd-en-default { + pins = "gpio32", "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_cd_default: sdhc2-cd-default { + pins = "gpio56"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_irq_default: ts-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio117"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 230ba3ce3277..9b4b7de7cec2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { aliases { @@ -95,6 +96,63 @@ pinctrl-0 = <&muic_int_default>; }; }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey: touchkey@20 { + /* Note: Actually an ABOV MCU that implements same interface */ + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + /* vcc/vdd-supply are board-specific */ + vddio-supply = <&pm8916_l6>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default &nfc_clk_req>; + }; + }; }; &blsp_i2c2 { @@ -122,6 +180,20 @@ }; }; +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -284,6 +356,14 @@ bias-disable; }; + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107", "gpio109"; function = "gpio"; @@ -333,6 +413,46 @@ bias-disable; }; + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + tsp_en_default: tsp-en-default { pins = "gpio73"; function = "gpio"; @@ -341,3 +461,14 @@ bias-disable; }; }; + +&pm8916_gpios { + nfc_clk_req: nfc-clk-req { + pins = "gpio2"; + function = "func1"; + + input-enable; + bias-disable; + power-source = <PM8916_GPIO_L2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 661f41ad978b..6cc2eaeb1d33 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -20,6 +20,37 @@ pinctrl-names = "default"; pinctrl-0 = <&panel_vdd3_default>; }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; }; &accelerometer { @@ -81,6 +112,22 @@ bias-disable; }; + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + ts_int_default: ts-int-default { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index dd35c3344358..c2eff5aebf85 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -7,6 +7,19 @@ / { model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; }; &accelerometer { @@ -42,7 +55,20 @@ }; }; +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + &msmgpio { + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + ts_int_default: ts-int-default { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index baa55643b40f..ffe1a9bd8f70 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -32,3 +32,7 @@ }; }; }; + +&tlmm { + gpio-reserved-ranges = <85 4>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi index 5f46a1427f1f..1e1514e9158c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi @@ -7,7 +7,7 @@ / { aliases { - serial0 = &blsp2_uart1; + serial0 = &blsp2_uart2; }; chosen { diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi deleted file mode 100644 index ac1ede579361..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ /dev/null @@ -1,653 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - - wcd9xxx_intr { - wcd_intr_default: wcd_intr_default{ - mux { - pins = "gpio54"; - function = "gpio"; - }; - - config { - pins = "gpio54"; - drive-strength = <2>; /* 2 mA */ - bias-pull-down; /* pull down */ - input-enable; - }; - }; - }; - - cdc_reset_ctrl { - cdc_reset_sleep: cdc_reset_sleep { - mux { - pins = "gpio64"; - function = "gpio"; - }; - config { - pins = "gpio64"; - drive-strength = <16>; - bias-disable; - output-low; - }; - }; - cdc_reset_active:cdc_reset_active { - mux { - pins = "gpio64"; - function = "gpio"; - }; - config { - pins = "gpio64"; - drive-strength = <16>; - bias-pull-down; - output-high; - }; - }; - }; - - blsp1_spi0_default: blsp1_spi0_default { - pinmux { - function = "blsp_spi1"; - pins = "gpio0", "gpio1", "gpio3"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio2"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio3"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio2"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp1_spi0_sleep: blsp1_spi0_sleep { - pinmux { - function = "gpio"; - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - blsp1_i2c2_default: blsp1_i2c2_default { - pinmux { - function = "blsp_i2c3"; - pins = "gpio47", "gpio48"; - }; - pinconf { - pins = "gpio47", "gpio48"; - drive-strength = <16>; - bias-disable = <0>; - }; - }; - - blsp1_i2c2_sleep: blsp1_i2c2_sleep { - pinmux { - function = "gpio"; - pins = "gpio47", "gpio48"; - }; - pinconf { - pins = "gpio47", "gpio48"; - drive-strength = <2>; - bias-disable = <0>; - }; - }; - - blsp2_i2c0_default: blsp2_i2c0 { - pinmux { - function = "blsp_i2c7"; - pins = "gpio55", "gpio56"; - }; - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_i2c0_sleep: blsp2_i2c0_sleep { - pinmux { - function = "gpio"; - pins = "gpio55", "gpio56"; - }; - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_uart1_2pins_default: blsp2_uart1_2pins { - pinmux { - function = "blsp_uart8"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_uart1_4pins_default: blsp2_uart1_4pins { - pinmux { - function = "blsp_uart8"; - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - }; - - pinconf { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - }; - - pinconf { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_i2c1_default: blsp2_i2c1 { - pinmux { - function = "blsp_i2c8"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_i2c1_sleep: blsp2_i2c1_sleep { - pinmux { - function = "gpio"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_uart2_2pins_default: blsp2_uart2_2pins { - pinmux { - function = "blsp_uart9"; - pins = "gpio49", "gpio50"; - }; - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep { - pinmux { - function = "gpio"; - pins = "gpio49", "gpio50"; - }; - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_uart2_4pins_default: blsp2_uart2_4pins { - pinmux { - function = "blsp_uart9"; - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - }; - - pinconf { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep { - pinmux { - function = "gpio"; - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - }; - - pinconf { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp2_spi5_default: blsp2_spi5_default { - pinmux { - function = "blsp_spi12"; - pins = "gpio85", "gpio86", "gpio88"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio87"; - }; - pinconf { - pins = "gpio85", "gpio86", "gpio88"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio87"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp2_spi5_sleep: blsp2_spi5_sleep { - pinmux { - function = "gpio"; - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - }; - pinconf { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - sdc2_clk_on: sdc2_clk_on { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - sdc2_cmd_on: sdc2_cmd_on { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 MA */ - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - sdc2_data_on: sdc2_data_on { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 MA */ - }; - }; - - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - pcie0_clkreq_default: pcie0_clkreq_default { - mux { - pins = "gpio36"; - function = "pci_e0"; - }; - - config { - pins = "gpio36"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie0_perst_default: pcie0_perst_default { - mux { - pins = "gpio35"; - function = "gpio"; - }; - - config { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie0_wake_default: pcie0_wake_default { - mux { - pins = "gpio37"; - function = "gpio"; - }; - - config { - pins = "gpio37"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie0_clkreq_sleep: pcie0_clkreq_sleep { - mux { - pins = "gpio36"; - function = "gpio"; - }; - - config { - pins = "gpio36"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie0_wake_sleep: pcie0_wake_sleep { - mux { - pins = "gpio37"; - function = "gpio"; - }; - - config { - pins = "gpio37"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie1_clkreq_default: pcie1_clkreq_default { - mux { - pins = "gpio131"; - function = "pci_e1"; - }; - - config { - pins = "gpio131"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie1_perst_default: pcie1_perst_default { - mux { - pins = "gpio130"; - function = "gpio"; - }; - - config { - pins = "gpio130"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie1_wake_default: pcie1_wake_default { - mux { - pins = "gpio132"; - function = "gpio"; - }; - - config { - pins = "gpio132"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie1_clkreq_sleep: pcie1_clkreq_sleep { - mux { - pins = "gpio131"; - function = "gpio"; - }; - - config { - pins = "gpio131"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie1_wake_sleep: pcie1_wake_sleep { - mux { - pins = "gpio132"; - function = "gpio"; - }; - - config { - pins = "gpio132"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie2_clkreq_default: pcie2_clkreq_default { - mux { - pins = "gpio115"; - function = "pci_e2"; - }; - - config { - pins = "gpio115"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie2_perst_default: pcie2_perst_default { - mux { - pins = "gpio114"; - function = "gpio"; - }; - - config { - pins = "gpio114"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie2_wake_default: pcie2_wake_default { - mux { - pins = "gpio116"; - function = "gpio"; - }; - - config { - pins = "gpio116"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie2_clkreq_sleep: pcie2_clkreq_sleep { - mux { - pins = "gpio115"; - function = "gpio"; - }; - - config { - pins = "gpio115"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie2_wake_sleep: pcie2_wake_sleep { - mux { - pins = "gpio116"; - function = "gpio"; - }; - - config { - pins = "gpio116"; - drive-strength = <2>; - bias-disable; - }; - }; - - cci0_default: cci0_default { - pinmux { - function = "cci_i2c"; - pins = "gpio17", "gpio18"; - }; - pinconf { - pins = "gpio17", "gpio18"; - drive-strength = <16>; - bias-disable; - }; - }; - - cci1_default: cci1_default { - pinmux { - function = "cci_i2c"; - pins = "gpio19", "gpio20"; - }; - pinconf { - pins = "gpio19", "gpio20"; - drive-strength = <16>; - bias-disable; - }; - }; - - camera_board_default: camera_board_default { - mux_pwdn { - function = "gpio"; - pins = "gpio98"; - }; - config_pwdn { - pins = "gpio98"; - drive-strength = <16>; - bias-disable; - }; - - mux_rst { - function = "gpio"; - pins = "gpio104"; - }; - config_rst { - pins = "gpio104"; - drive-strength = <16>; - bias-disable; - }; - - mux_mclk1 { - function = "cam_mclk"; - pins = "gpio14"; - }; - config_mclk1 { - pins = "gpio14"; - drive-strength = <16>; - bias-disable; - }; - }; - - camera_front_default: camera_front_default { - mux_pwdn { - function = "gpio"; - pins = "gpio133"; - }; - config_pwdn { - pins = "gpio133"; - drive-strength = <16>; - bias-disable; - }; - - mux_rst { - function = "gpio"; - pins = "gpio23"; - }; - config_rst { - pins = "gpio23"; - drive-strength = <16>; - bias-disable; - }; - - mux_mclk2 { - function = "cam_mclk"; - pins = "gpio15"; - }; - config_mclk2 { - pins = "gpio15"; - drive-strength = <16>; - bias-disable; - }; - }; - - camera_rear_default: camera_rear_default { - mux_pwdn { - function = "gpio"; - pins = "gpio26"; - }; - config_pwdn { - pins = "gpio26"; - drive-strength = <16>; - bias-disable; - }; - - mux_rst { - function = "gpio"; - pins = "gpio25"; - }; - config_rst { - pins = "gpio25"; - drive-strength = <16>; - bias-disable; - }; - - mux_mclk0 { - function = "cam_mclk"; - pins = "gpio13"; - }; - config_mclk0 { - pins = "gpio13"; - drive-strength = <16>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 5d06216c5c1c..0e1bc4669d7e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -6,7 +6,9 @@ #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -43,6 +45,9 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -57,6 +62,9 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; next-level-cache = <&L2_0>; }; @@ -67,6 +75,9 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; @@ -81,6 +92,9 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; next-level-cache = <&L2_1>; }; @@ -120,6 +134,227 @@ }; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x77>; + clock-latency-ns = <200000>; + }; + }; + firmware { scm { compatible = "qcom,scm-msm8996"; @@ -424,7 +659,7 @@ bits = <1 4>; }; - gpu_speed_bin: gpu_speed_bin@133 { + speedbin_efuse: speedbin@133 { reg = <0x133 0x1>; bits = <5 3>; }; @@ -472,7 +707,7 @@ tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; - reg = <0x00740000 0x20000>; + reg = <0x00740000 0x40000>; }; tcsr: syscon@7a0000 { @@ -521,6 +756,8 @@ #size-cells = <1>; ranges; + status = "disabled"; + mdp: mdp@901000 { compatible = "qcom,mdp5"; reg = <0x00901000 0x90000>; @@ -542,6 +779,11 @@ iommus = <&mdp_smmu 0>; + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -552,9 +794,82 @@ remote-endpoint = <&hdmi_in>; }; }; + + port@1 { + reg = <1>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; }; }; + dsi0: dsi@994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@994400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00994400 0x100>, + <0x00994500 0x300>, + <0x00994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + hdmi: hdmi-tx@9a0000 { compatible = "qcom,hdmi-tx-8996"; reg = <0x009a0000 0x50c>, @@ -618,7 +933,8 @@ "ref"; }; }; - gpu@b00000 { + + gpu: gpu@b00000 { compatible = "qcom,adreno-530.2", "qcom,adreno"; #stream-id-cells = <16>; @@ -642,7 +958,7 @@ power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; - nvmem-cells = <&gpu_speed_bin>; + nvmem-cells = <&speedbin_efuse>; nvmem-cell-names = "speed_bin"; qcom,gpu-quirk-two-pass-use-wfi; @@ -650,6 +966,8 @@ operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + gpu_opp_table: opp-table { compatible ="operating-points-v2"; @@ -693,15 +1011,482 @@ }; }; - msmgpio: pinctrl@1010000 { + tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 150>; + gpio-ranges = <&tlmm 0 0 150>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp1_spi1_default: blsp1-spi1-default { + spi { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1_spi1_sleep: blsp1-spi1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_2pins_default: blsp2-uart1-2pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_default: blsp2-i2c2 { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera0_state_on: + camera_rear_default: camera-rear-default { + mclk0 { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + rst { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + pwdn { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera1_state_on: + camera_board_default: camera-board-default { + mclk1 { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + pwdn { + pins = "gpio98"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst { + pins = "gpio104"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera2_state_on: + camera_front_default: camera-front-default { + mclk2 { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + rst { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + pwdn { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + pcie0_state_on: pcie0-state-on { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_state_off: pcie0-state-off { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c3_default: blsp1-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <16>; + bias-disable = <0>; + }; + + blsp1_i2c3_sleep: blsp1-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-disable = <0>; + }; + + blsp2_uart3_4pins_default: blsp2-uart2-4pins { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <2>; + bias-disable; + }; + + wcd_intr_default: wcd-intr-default{ + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + blsp2_i2c1_default: blsp2-i2c1 { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c0-sleep { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_default: blsp2-i2c5 { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + /* Sleep state for BLSP2_I2C5 is missing.. */ + + cdc_reset_active: cdc-reset-active { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + output-high; + }; + + cdc_reset_sleep: cdc-reset-sleep { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + blsp2_spi6_default: blsp2-spi5-default { + spi { + pins = "gpio85", "gpio86", "gpio88"; + function = "blsp_spi12"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio87"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp2_spi6_sleep: blsp2-spi5-sleep { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_i2c6_default: blsp2-i2c6 { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_state_on: pcie1-state-on { + perst { + pins = "gpio130"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio131"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_state_off: pcie1-state-off { + /* Perst is missing? */ + clkreq { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_state_on: pcie2-state-on { + perst { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio115"; + function = "pci_e2"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_state_off: pcie2-state-off { + /* Perst is missing? */ + clkreq { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc1_state_on: sdc1-state-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-state-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-clk-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-clk-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; }; spmi_bus: qcom,spmi@400f000 { @@ -762,8 +1547,8 @@ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; - pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + pinctrl-0 = <&pcie0_state_on>; + pinctrl-1 = <&pcie0_state_off>; linux,pci-domain = <0>; @@ -816,8 +1601,8 @@ <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; - pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + pinctrl-0 = <&pcie1_state_on>; + pinctrl-1 = <&pcie1_state_off>; linux,pci-domain = <1>; @@ -867,8 +1652,8 @@ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; - pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + pinctrl-0 = <&pcie2_state_on>; + pinctrl-1 = <&pcie2_state_off>; linux,pci-domain = <2>; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, @@ -1152,7 +1937,7 @@ power-domains = <&mmcc GPU_GDSC>; }; - video-codec@c00000 { + venus: video-codec@c00000 { compatible = "qcom,msm8996-venus"; reg = <0x00c00000 0xff000>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; @@ -1183,7 +1968,7 @@ <&venus_smmu 0x2d>, <&venus_smmu 0x31>; memory-region = <&venus_region>; - status = "okay"; + status = "disabled"; video-decoder { compatible = "venus-decoder"; @@ -1745,9 +2530,14 @@ }; }; }; + kryocc: clock-controller@6400000 { - compatible = "qcom,apcc-msm8996"; + compatible = "qcom,msm8996-apcc"; reg = <0x06400000 0x90000>; + + clock-names = "xo"; + clocks = <&xo_board>; + #clock-cells = <1>; }; @@ -1758,6 +2548,10 @@ #size-cells = <1>; ranges; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, @@ -1772,7 +2566,7 @@ power-domains = <&gcc USB30_GDSC>; status = "disabled"; - dwc3@6a00000 { + usb@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -1841,34 +2635,75 @@ status = "disabled"; }; + sdhc1: sdhci@7464900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07464900 0x11c>, <0x07464000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + sdhc2: sdhci@74a4900 { - status = "disabled"; - compatible = "qcom,sdhci-msm-v4"; - reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clock-names = "iface", "core", "xo"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; - bus-width = <4>; + compatible = "qcom,sdhci-msm-v4"; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + + bus-width = <4>; + status = "disabled"; }; - blsp1_uart1: serial@7570000 { + blsp1_dma: dma@7544000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07544000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@7570000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x07570000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; status = "disabled"; }; - blsp1_spi0: spi@7575000 { + blsp1_spi1: spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07575000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -1876,14 +2711,16 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi0_default>; - pinctrl-1 = <&blsp1_spi0_sleep>; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp1_i2c2: i2c@7577000 { + blsp1_i2c3: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -1891,14 +2728,27 @@ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_i2c2_default>; - pinctrl-1 = <&blsp1_i2c2_sleep>; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp2_uart1: serial@75b0000 { + blsp2_dma: dma@7584000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07584000 0x2b000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart2: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x075b0000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -1908,7 +2758,7 @@ status = "disabled"; }; - blsp2_uart2: serial@75b1000 { + blsp2_uart3: serial@75b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x075b1000 0x1000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; @@ -1918,7 +2768,7 @@ status = "disabled"; }; - blsp2_i2c0: i2c@75b5000 { + blsp2_i2c1: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; @@ -1926,14 +2776,16 @@ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c0_default>; - pinctrl-1 = <&blsp2_i2c0_sleep>; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp2_i2c1: i2c@75b6000 { + blsp2_i2c2: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; @@ -1941,14 +2793,49 @@ <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c1_default>; - pinctrl-1 = <&blsp2_i2c1_sleep>; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp2_spi5: spi@75ba000{ + blsp2_i2c5: i2c@75b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75b9000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c5_default>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c6: i2c@75ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75ba000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi6: spi@75ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1956,8 +2843,10 @@ <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_spi5_default>; - pinctrl-1 = <&blsp2_spi5_sleep>; + pinctrl-0 = <&blsp2_spi6_default>; + pinctrl-1 = <&blsp2_spi6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1981,14 +2870,16 @@ assigned-clock-rates = <19200000>, <60000000>; power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; status = "disabled"; - dwc3@7600000 { + usb@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; + maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; }; @@ -2032,13 +2923,13 @@ compatible = "slim217,1a0"; reg = <1 0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, <53 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&msmgpio 64 0>; + reset-gpios = <&tlmm 64 0>; slim-ifc-dev = <&tasha_ifd>; @@ -2067,6 +2958,11 @@ qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; + power-domains = <&rpmpd MSM8996_VDDCX>; + power-domain-names = "cx"; + + status = "disabled"; + smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; @@ -2458,4 +3354,3 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; -#include "msm8996-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index e9d3ce29937c..6f294f9c0cdf 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1964,7 +1964,7 @@ resets = <&gcc GCC_USB_30_BCR>; - usb3_dwc3: dwc3@a800000 { + usb3_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0x0a800000 0xcd00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 8ab4f1f78bbf..8a4972e6a24c 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -7,6 +7,30 @@ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/thermal/thermal.h> +/ { + thermal-zones { + pm6150_thermal: pm6150-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; + + trips { + pm6150_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm6150_crit: crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150_lsid0: pmic@0 { compatible = "qcom,pm6150", "qcom,spmi-pmic"; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi new file mode 100644 index 000000000000..e7f64a9ddc9c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2021, The Linux Foundation. All rights reserved. + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm7325: pmic@1 { + compatible = "qcom,pm7325", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7325_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm7325_gpios: gpios@8800 { + compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm7325_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&thermal_zones { + pm7325_thermal: pm7325-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm7325_temp_alarm>; + + trips { + pm7325_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm7325_crit: pm7325-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index fa4ea7ded0ab..c566a64b1373 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -50,7 +50,8 @@ pon: power-on@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; - pwrkey { + + pon_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; @@ -59,6 +60,15 @@ status = "disabled"; }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; }; pm8150_temp: temp-alarm@2400 { diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index 2b9b75ecec60..e1b75ae0a823 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -13,13 +13,43 @@ #address-cells = <1>; #size-cells = <0>; + pm8350c_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350c_gpios: gpio@8800 { - compatible = "qcom,pm8350c-gpio"; + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pm8350c_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; }; + +&thermal_zones { + pm8350c_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; + + trips { + pm8350c_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350c_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index c3876c82c874..ad19016df047 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -45,7 +45,6 @@ pm8994_pon: pon@800 { compatible = "qcom,pm8916-pon"; - reg = <0x800>; mode-bootloader = <0x2>; mode-recovery = <0x1>; @@ -58,6 +57,13 @@ linux,code = <KEY_POWER>; }; + pm8994_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm8994_temp: temp-alarm@2400 { diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index e5ed28ab9b2d..b4ac900ab115 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -32,5 +32,18 @@ #address-cells = <1>; #size-cells = <1>; }; + + pmi8994_wled: wled@d800 { + compatible = "qcom,pmi8994-wled"; + reg = <0xd800 0xd900>; + interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "short"; + qcom,num-strings = <3>; + /* Yes, all four strings *have to* be defined or things won't work. */ + qcom,enabled-strings = <0 1 2 3>; + qcom,cabc; + qcom,eternal-pfet; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 1530b8ff270f..04fc2632a0b2 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -3,6 +3,8 @@ * Copyright (c) 2021, Linaro Limited */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -13,10 +15,57 @@ #address-cells = <1>; #size-cells = <0>; + pmk8350_pon: pon@1300 { + compatible = "qcom,pm8998-pon"; + reg = <0x1300>; + + pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + pmk8350_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eoc-int-en-set"; + #io-channel-cells = <1>; + io-channel-ranges; + }; + + pmk8350_adc_tm: adc-tm@3400 { + compatible = "qcom,adc-tm7"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "threshold"; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pmk8350_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pmk8350_gpios: gpio@b000 { - compatible = "qcom,pmk8350-gpio"; + compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; reg = <0xb000>; gpio-controller; + gpio-ranges = <&pmk8350_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi new file mode 100644 index 000000000000..7072e5a2e73f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/ { + thermal-zones { + pmm8155au-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_1_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pmm8155au_1_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_1_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_1_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmm8155au_1_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pmm8155au_1_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_1_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi new file mode 100644 index 000000000000..72075964fbb9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8155au-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_2_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@4 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmm8155au_2_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_2_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_2_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_2_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi index 1c675af13cbf..b4b6ba24f845 100644 --- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi @@ -13,13 +13,43 @@ #address-cells = <1>; #size-cells = <0>; + pmr735a_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmr735a_gpios: gpio@8800 { - compatible = "qcom,pmr735a-gpio"; + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; }; + +&thermal_zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; + + trips { + pmr735a_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735a_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index a80c578484ba..f8a55307b855 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -337,7 +337,7 @@ &usb3 { status = "okay"; - dwc3@7580000 { + usb@7580000 { dr_mode = "host"; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790ba585d..9c4be020d568 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -544,7 +544,7 @@ assigned-clock-rates = <19200000>, <200000000>; status = "disabled"; - dwc3@7580000 { + usb@7580000 { compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -573,7 +573,7 @@ assigned-clock-rates = <19200000>, <133333333>; status = "disabled"; - dwc3@78c0000 { + usb@78c0000 { compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 5f41de20aa22..8ac96f8e79d4 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -552,7 +551,13 @@ vdds-supply = <&vreg_l5a_0p88>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sm8250/a650_zap.mbn"; @@ -664,10 +669,6 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; }; &pcie0_phy { @@ -678,10 +679,6 @@ &pcie1 { status = "okay"; - perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; }; &pcie1_phy { @@ -692,10 +689,6 @@ &pcie2 { status = "okay"; - perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_default_state>; }; &pcie2_phy { @@ -1173,81 +1166,6 @@ bias-disable; }; - pcie0_default_state: pcie0-default { - clkreq { - pins = "gpio80"; - function = "pci_e0"; - bias-pull-up; - }; - - reset-n { - pins = "gpio79"; - function = "gpio"; - - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - wake-n { - pins = "gpio81"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie1_default_state: pcie1-default { - clkreq { - pins = "gpio83"; - function = "pci_e1"; - bias-pull-up; - }; - - reset-n { - pins = "gpio82"; - function = "gpio"; - - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - wake-n { - pins = "gpio84"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie2_default_state: pcie2-default { - clkreq { - pins = "gpio86"; - function = "pci_e2"; - bias-pull-up; - }; - - reset-n { - pins = "gpio85"; - function = "gpio"; - - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - wake-n { - pins = "gpio87"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - sdc2_default_state: sdc2-default { clk { pins = "sdc2_clk"; @@ -1352,6 +1270,10 @@ qcom,dmic-sample-rate = <600000>; }; +&venus { + status = "okay"; +}; + /* PINCTRL - additions to nodes defined in sm8250.dtsi */ &qup_spi0_cs_gpio { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts new file mode 100644 index 000000000000..0da7a3b8d1bf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pmm8155au_1.dtsi" +#include "pmm8155au_2.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SA8155P ADP"; + compatible = "qcom,sa8155p-adp", "qcom,sa8155p"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_3p3: vreg_3p3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * S4A is always on and not controllable through RPMh. + * So model it as a fixed regulator. + */ + vreg_s4a_1p8: smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + + vin-supply = <&vreg_3p3>; + }; +}; + +&apps_rsc { + pmm8155au-1-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; + vdd-l6-l9-supply = <&vreg_s6a_0p92>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s5a_2p04: smps5 { + regulator-name = "vreg_s5a_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p92: smps6 { + regulator-name = "vreg_s6a_0p92"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1a_0p752: ldo1 { + regulator-name = "vreg_l1a_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_3p1: + vreg_l2a_3p072: ldo2 { + regulator-name = "vreg_l2a_3p072"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-name = "vreg_l3a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_usb_ss_dp_core_1: + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p96: ldo10 { + regulator-name = "vreg_l10a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l11a_0p8: ldo11 { + regulator-name = "vreg_l11a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_1p8: + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-name = "vreg_l13a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-name = "vreg_l15a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmm8155au-2-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>; + vdd-l6-l9-supply = <&vreg_s6c_1p128>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s4c_1p352: smps4 { + regulator-name = "vreg_s4c_1p352"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5c_2p04: smps5 { + regulator-name = "vreg_s5c_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6c_1p128: smps6 { + regulator-name = "vreg_s6c_1p128"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1c_1p304: ldo1 { + regulator-name = "vreg_l1c_1p304"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p808: ldo2 { + regulator-name = "vreg_l2c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p2: ldo5 { + regulator-name = "vreg_l5c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c_1p8: ldo7 { + regulator-name = "vreg_l7c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p2: ldo8 { + regulator-name = "vreg_l8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_0p8: ldo11 { + regulator-name = "vreg_l11c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p808: ldo12 { + regulator-name = "vreg_l12c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p96: ldo13 { + regulator-name = "vreg_l13c_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15c_1p9: ldo15 { + regulator-name = "vreg_l15c_1p9"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16c_3p008: ldo16 { + regulator-name = "vreg_l16c_3p008"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18c_0p88: ldo18 { + regulator-name = "vreg_l18c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p96>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l5c_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-max-microamp = <87100>; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda-pll-max-microamp = <18300>; +}; + + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index e77a7926034a..acdb36f4479f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "sc7180.dtsi" #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -45,7 +46,7 @@ /* Increase the size from 2MB to 8MB */ &rmtfs_mem { - reg = <0x0 0x84400000 0x0 0x800000>; + reg = <0x0 0x94600000 0x0 0x800000>; }; / { @@ -288,6 +289,57 @@ }; }; +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l3c_1p2>; + + panel@0 { + compatible = "visionox,rm69299-1080p-display"; + reg = <0>; + + vdda-supply = <&vreg_l8c_1p8>; + vdd3p3-supply = <&vreg_l18a_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pins>; + + reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi_phy { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + &qfprom { vcc-supply = <&vreg_l11a_1p8>; }; @@ -414,6 +466,19 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&pm6150l_gpio { + disp_pins: disp-pins { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_FUNC1; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; + power-source = <0>; + bias-disable; + output-low; + }; + }; +}; + &qspi_clk { pinconf { pins = "gpio63"; @@ -598,4 +663,106 @@ bias-pull-up; }; }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts index 533c048903ea..82dc00cc7fb9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts @@ -9,8 +9,8 @@ #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google CoachZ (rev1) with LTE"; - compatible = "google,coachz-rev1-sku0", "qcom,sc7180"; + model = "Google CoachZ (rev1 - 2) with LTE"; + compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180"; }; &cros_ec_proximity { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 1b1dbdb2a82f..21b516e0694a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -10,8 +10,26 @@ #include "sc7180-trogdor-coachz.dtsi" / { - model = "Google CoachZ (rev1)"; - compatible = "google,coachz-rev1", "qcom,sc7180"; + model = "Google CoachZ (rev1 - 2)"; + compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180"; +}; + +/* + * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + +/* + * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, + * which currently is not supported by the PM6150 ADC driver. Disable the + * skin temperature thermal zone to avoid using bogus temperature values. + */ +&skin_temp_thermal { + status = "disabled"; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts index 6e7745801fae..d23409034e8c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts @@ -2,14 +2,14 @@ /* * Google CoachZ board device tree source * - * Copyright 2020 Google LLC. + * Copyright 2021 Google LLC. */ -#include "sc7180-trogdor-coachz-r2.dts" +#include "sc7180-trogdor-coachz-r3.dts" #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google CoachZ (rev2+) with LTE"; + model = "Google CoachZ (rev3+) with LTE"; compatible = "google,coachz-sku0", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts index 4f69b6ba299f..a02d2d57c78c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts @@ -2,7 +2,7 @@ /* * Google CoachZ board device tree source * - * Copyright 2020 Google LLC. + * Copyright 2021 Google LLC. */ /dts-v1/; @@ -10,6 +10,6 @@ #include "sc7180-trogdor-coachz.dtsi" / { - model = "Google CoachZ (rev2+)"; + model = "Google CoachZ (rev3+)"; compatible = "google,coachz", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 4c6e433c8226..6f9c07147551 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -23,8 +23,53 @@ ap_h1_spi: &spi0 {}; adau7002: audio-codec-1 { compatible = "adi,adau7002"; IOVDD-supply = <&pp1800_l15a>; + wakeup-delay-ms = <15>; #sound-dai-cells = <0>; }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <814>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <42000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <45000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <60000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; &ap_spi_fp { @@ -77,6 +122,25 @@ ap_ts_pen_1v8: &i2c4 { compatible = "boe,nv110wtm-n61"; }; +&pm6150_adc { + skin-temp-thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index 5c997cd90069..30e3e769d2b4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,15 +14,6 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; -/* - * Lazor is stuffed with a 47k NTC as charger thermistor which currently is - * not supported by the PM6150 ADC driver. Disable the charger thermal zone - * to avoid using bogus temperature values. - */ -&charger_thermal { - status = "disabled"; -}; - &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index d9fbcc7bc5bd..c2ef06367baf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -14,15 +14,6 @@ compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; -/* - * Lazor is stuffed with a 47k NTC as charger thermistor which currently is - * not supported by the PM6150 ADC driver. Disable the charger thermal zone - * to avoid using bogus temperature values. - */ -&charger_thermal { - status = "disabled"; -}; - &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts index ea8c2ee09741..b474df47cd70 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -14,12 +14,3 @@ model = "Google Lazor (rev3+)"; compatible = "google,lazor", "qcom,sc7180"; }; - -/* - * Lazor is stuffed with a 47k NTC as charger thermistor which currently is - * not supported by the PM6150 ADC driver. Disable the charger thermal zone - * to avoid using bogus temperature values. - */ -&charger_thermal { - status = "disabled"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 6b10b96173e8..00535aaa43c9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -21,6 +21,15 @@ ap_h1_spi: &spi0 {}; semtech,avg-pos-strength = <64>; }; +/* + * Lazor is stuffed with a 47k NTC as charger thermistor which currently is + * not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index e720e7bd0d70..e122a6b481ff 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -9,11 +9,23 @@ #include "sc7180-trogdor-pompom.dtsi" +/delete-node/ &keyboard_controller; +#include <arm/cros-ec-keyboard.dtsi> + / { model = "Google Pompom (rev1)"; compatible = "google,pompom-rev1", "qcom,sc7180"; }; +/* + * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts index 791d496ad046..00e187c08eb9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts @@ -9,6 +9,6 @@ #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Pompom (rev2+) with LTE"; - compatible = "google,pompom-sku0", "qcom,sc7180"; + model = "Google Pompom (rev2) with LTE"; + compatible = "google,pompom-rev2-sku0", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts index 984d7337da78..4f32e6733f4c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -10,35 +10,15 @@ #include "sc7180-trogdor-pompom.dtsi" / { - model = "Google Pompom (rev2+)"; - compatible = "google,pompom", "qcom,sc7180"; + model = "Google Pompom (rev2)"; + compatible = "google,pompom-rev2", "qcom,sc7180"; }; -&keyboard_controller { - function-row-physmap = < - MATRIX_KEY(0x00, 0x02, 0) /* T1 */ - MATRIX_KEY(0x03, 0x02, 0) /* T2 */ - MATRIX_KEY(0x02, 0x02, 0) /* T3 */ - MATRIX_KEY(0x01, 0x02, 0) /* T4 */ - MATRIX_KEY(0x03, 0x04, 0) /* T5 */ - MATRIX_KEY(0x02, 0x04, 0) /* T6 */ - MATRIX_KEY(0x01, 0x04, 0) /* T7 */ - MATRIX_KEY(0x02, 0x09, 0) /* T8 */ - MATRIX_KEY(0x01, 0x09, 0) /* T9 */ - MATRIX_KEY(0x00, 0x04, 0) /* T10 */ - >; - linux,keymap = < - MATRIX_KEY(0x00, 0x02, KEY_BACK) - MATRIX_KEY(0x03, 0x02, KEY_REFRESH) - MATRIX_KEY(0x02, 0x02, KEY_ZOOM) - MATRIX_KEY(0x01, 0x02, KEY_SCALE) - MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) - MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) - MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) - MATRIX_KEY(0x02, 0x09, KEY_MUTE) - MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) - MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) - - CROS_STD_MAIN_KEYMAP - >; +/* + * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts new file mode 100644 index 000000000000..e90b73c353bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r3.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev3+) with LTE"; + compatible = "google,pompom-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts new file mode 100644 index 000000000000..f8aac63a53ef --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev3+)"; + compatible = "google,pompom", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 622b5f1b88a2..a246dbd74cc1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -107,6 +107,35 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + &panel { compatible = "kingdisplay,kd116n21-30nv-a010"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 24d293ef56d7..77ae7561d436 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -64,11 +64,6 @@ no-map; }; - camera_mem: memory@8ec00000 { - reg = <0x0 0x8ec00000 0x0 0x500000>; - no-map; - }; - venus_mem: memory@8f600000 { reg = <0 0x8f600000 0 0x500000>; no-map; @@ -335,8 +330,7 @@ compatible = "jedec,spi-nor"; reg = <0>; - /* TODO: Increase frequency after testing */ - spi-max-frequency = <25000000>; + spi-max-frequency = <37500000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; }; @@ -564,10 +558,6 @@ #size-cells = <0>; }; - pdupdate { - compatible = "google,cros-ec-pd-update"; - }; - typec { compatible = "google,cros-ec-typec"; #address-cells = <1>; @@ -655,6 +645,8 @@ edp_brij_i2c: &i2c2 { clocks = <&rpmhcc RPMH_LN_BB_CLK3>; clock-names = "refclk"; + no-hpd; + ports { #address-cells = <1>; #size-cells = <0>; @@ -772,7 +764,7 @@ hp_i2c: &i2c9 { qcom,capture-sd-lines = <0>; }; - mi2s@1 { + secondary_mi2s: mi2s@1 { reg = <MI2S_SECONDARY>; qcom,playback-sd-lines = <0>; }; @@ -805,7 +797,7 @@ hp_i2c: &i2c9 { }; }; -&pm6150_pwrkey { +&pm6150_pon { status = "disabled"; }; @@ -981,6 +973,7 @@ ap_spi_fp: &spi10 { &qspi_clk { pinconf { pins = "gpio63"; + drive-strength = <8>; bias-disable; }; }; @@ -1494,4 +1487,106 @@ ap_spi_fp: &spi10 { drive-strength = <2>; }; }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 6228ba2d8513..a5d58eb92896 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -701,8 +701,9 @@ interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -726,15 +727,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <100000 100000>; - opp-avg-kBps = <100000 50000>; + opp-peak-kBps = <1800000 600000>; + opp-avg-kBps = <100000 0>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - opp-peak-kBps = <600000 900000>; - opp-avg-kBps = <261438 300000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; }; }; }; @@ -768,8 +769,6 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>; - interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -1059,8 +1058,6 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>; - interconnect-names = "qup-core"; status = "disabled"; i2c6: i2c@a80000 { @@ -1871,108 +1868,6 @@ function = "lpass_ext"; }; }; - - sdc1_on: sdc1-on { - pinconf-clk { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; - - pinconf-cmd { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - pinconf-data { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; - - pinconf-rclk { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_off: sdc1-off { - pinconf-clk { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - pinconf-cmd { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf-data { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf-rclk { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc2_on: sdc2-on { - pinconf-clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - pinconf-cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - pinconf-data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - pinconf-sd-cd { - pins = "gpio69"; - bias-pull-up; - drive-strength = <2>; - }; - }; - - sdc2_off: sdc2-off { - pinconf-clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - pinconf-cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf-data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf-sd-cd { - pins = "gpio69"; - bias-disable; - drive-strength = <2>; - }; - }; }; remoteproc_mpss: remoteproc@4080000 { @@ -2670,8 +2565,9 @@ interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + <&gcc GCC_SDCC2_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; @@ -2689,15 +2585,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <160000 100000>; - opp-avg-kBps = <80000 50000>; + opp-peak-kBps = <1800000 600000>; + opp-avg-kBps = <100000 0>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - opp-peak-kBps = <200000 120000>; - opp-avg-kBps = <100000 60000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; }; }; }; @@ -2754,8 +2650,8 @@ usb_1_qmpphy: phy-wrapper@88e9000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; + <0 0x088e8000 0 0x3c>, + <0 0x088ea000 0 0x18c>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -2860,7 +2756,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 54d2cb365b71..3900cfc09562 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -7,11 +7,19 @@ /dts-v1/; +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pmr735a.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP platform"; - compatible = "qcom,sc7280-idp", "qcom,sc7280"; + compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280"; aliases { serial0 = &uart5; @@ -234,6 +242,32 @@ }; }; +&pmk8350_vadc { + pm8350_die_temp { + reg = <PM8350_ADC7_DIE_TEMP>; + label = "pm8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmk8350_die_temp { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a_die_temp { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735b_die_temp { + reg = <PMR735B_ADC7_DIE_TEMP>; + label = "pmr735b_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 2cc478553935..a8c274ad74c4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -11,7 +11,10 @@ #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> +#include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -51,6 +54,11 @@ no-map; }; + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + cpucp_mem: memory@80b00000 { no-map; reg = <0x0 0x80b00000 0x0 0x100000>; @@ -70,6 +78,8 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -88,6 +98,8 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -103,6 +115,8 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -118,6 +132,8 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -133,6 +149,8 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -148,6 +166,8 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -163,6 +183,8 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -178,6 +200,8 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -251,6 +275,125 @@ }; }; + clk_virt: interconnect { + compatible = "qcom,sc7280-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wpss { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <13>; + + wpss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wpss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; @@ -316,6 +459,93 @@ }; }; + cnoc2: interconnect@1500000 { + reg = <0 0x01500000 0 0x1000>; + compatible = "qcom,sc7280-cnoc2"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc3: interconnect@1502000 { + reg = <0 0x01502000 0 0x1000>; + compatible = "qcom,sc7280-cnoc3"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + reg = <0 0x01580000 0 0x4>; + compatible = "qcom,sc7280-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + reg = <0 0x01680000 0 0x15480>; + compatible = "qcom,sc7280-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7280-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + reg = <0 0x01700000 0 0x2b080>; + compatible = "qcom,sc7280-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + reg = <0 0x01740000 0 0x1e080>; + compatible = "qcom,sc7280-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex", "syscon"; + reg = <0 0x01f40000 0 0x40000>; + #hwlock-cells = <1>; + }; + + lpasscc: lpasscc@3000000 { + compatible = "qcom,sc7280-lpasscc"; + reg = <0 0x03000000 0 0x40>, + <0 0x03c04000 0 0x4>, + <0 0x03389000 0 0x24>; + reg-names = "qdsp6ss", "top_cc", "cc"; + clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; + clock-names = "iface"; + #clock-cells = <1>; + }; + + lpass_ag_noc: interconnect@3c40000 { + reg = <0 0x03c40000 0 0xf080>; + compatible = "qcom,sc7280-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc7280-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -805,6 +1035,20 @@ }; }; + dc_noc: interconnect@90e0000 { + reg = <0 0x090e0000 0 0x5080>; + compatible = "qcom,sc7280-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + reg = <0 0x9100000 0 0xe2200>; + compatible = "qcom,sc7280-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + system-cache-controller@9200000 { compatible = "qcom,sc7280-llcc"; reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; @@ -812,6 +1056,42 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + nsp_noc: interconnect@a0c0000 { + reg = <0 0x0a0c0000 0 0x10000>; + compatible = "qcom,sc7280-nsp-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,sc7280-videocc"; + reg = <0 0xaaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7280-dispcc"; + reg = <0 0xaf00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <0>, <0>, <0>, <0>, <0>, <0>; + clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; @@ -825,6 +1105,40 @@ interrupt-controller; }; + pdc_reset: reset-controller@b5e0000 { + compatible = "qcom,sc7280-pdc-global"; + reg = <0 0x0b5e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7280-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; @@ -1063,6 +1377,10 @@ <WAKE_TCS 3>, <CONTROL_TCS 1>; + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + rpmhpd: power-controller { compatible = "qcom,sc7280-rpmhpd"; #power-domain-cells = <1>; @@ -1116,6 +1434,859 @@ #clock-cells = <1>; }; }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu10-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu10_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu10_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu10_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu11-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu11_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu11_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu11_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0_crit: gpuss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1_crit: gpuss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nspss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss0_crit: nspss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss1_crit: nspss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdmss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss0_crit: mdmss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdmss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss1_crit: mdmss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + mdmss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss2_crit: mdmss2-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + mdmss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss3_crit: mdmss3-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + camera0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0_crit: camera0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 216a74f0057c..dfd1b42c07fd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -714,10 +714,6 @@ ap_ts_i2c: &i2c14 { #address-cells = <1>; #size-cells = <0>; }; - - pdupdate { - compatible = "google,cros-ec-pd-update"; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 1372fe8601f5..91ede9296aff 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -448,6 +448,11 @@ clock-frequency = <400000>; }; +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 8f617f7b6d34..4d052e39b348 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -46,6 +46,14 @@ }; reserved-memory { + /* The rmtfs_mem needs to be guarded due to "XPU limitations" + * it is otherwise possible for an allocation adjacent to the + * rmtfs_mem region to trigger an XPU violation, causing a crash. + */ + rmtfs_lower_guard: memory@f5b00000 { + no-map; + reg = <0 0xf5b00000 0 0x1000>; + }; /* * The rmtfs memory region in downstream is 'dynamically allocated' * but given the same address every time. Hard code it as this address is @@ -59,6 +67,10 @@ qcom,client-id = <1>; qcom,vmid = <15>; }; + rmtfs_upper_guard: memory@f5d01000 { + no-map; + reg = <0 0xf5d01000 0 0x2000>; + }; /* * It seems like reserving the old rmtfs_mem region is also needed to prevent @@ -387,6 +399,12 @@ }; }; +&ipa { + status = "okay"; + + memory-region = <&ipa_fw_mem>; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 7d029425336e..c60c8c640e17 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -5,6 +5,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -311,6 +313,28 @@ }; }; +/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -328,6 +352,70 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; }; +&sound { + compatible = "qcom,db845c-sndcard"; + pinctrl-0 = <&quat_mi2s_active + &quat_mi2s_sd0_active>; + pinctrl-names = "default"; + model = "Xiaomi Poco F1"; + audio-routing = + "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; @@ -356,6 +444,15 @@ function = "gpio"; bias-pull-up; }; + + wcd_intr_default: wcd_intr_default { + pins = <54>; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; }; &uart6 { @@ -416,6 +513,23 @@ vdda-pll-supply = <&vreg_l1a_0p875>; }; +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; + &wifi { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0a86fe71a66d..1796ae8372be 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3781,7 +3781,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3829,7 +3829,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 140db2d5ba31..c2a709a384e9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -376,6 +376,8 @@ clocks = <&sn65dsi86_refclk>; clock-names = "refclk"; + no-hpd; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index fb2cf3d987a1..335aa0753fc0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -354,22 +354,26 @@ }; }; -&qupv3_id_1 { +&gmu { status = "okay"; }; -&pon { - pwrkey { - status = "okay"; - }; +&gpu { + status = "okay"; +}; - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_1 { + status = "okay"; }; &remoteproc_adsp { diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts new file mode 100644 index 000000000000..736da9af44e0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2021, Microsoft Corporation + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Microsoft Surface Duo"; + compatible = "microsoft,surface-duo", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol_up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + bq27742@55 { + compatible = "ti,bq27742"; + reg = <0x55>; + }; + + da7280@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "da7280_default"; + pinctrl-0 = <&da7280_intr_default>; + + dlg,actuator-type = "LRA"; + dlg,dlg,const-op-mode = <1>; + dlg,dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <129000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <14300000>; + dlg,freq-track-enable; + dlg,bemf-sens-enable; + dlg,mem-array = < + 0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a + 0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29 + 0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01 + 0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06 + 0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08 + 0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84 + 0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e + 0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + >; + }; + + /* SMB1381 @ 0x44 */ + /* MAX34417 @ 0x1c */ +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* SMB1355 @ 0x0c */ + /* SMB1390 @ 0x10 */ +}; + +&i2c17 { + status = "okay"; + clock-frequency = <400000>; + + bq27742@55 { + compatible = "ti,bq27742"; + reg = <0x55>; + }; +}; + +&i2c19 { + status = "okay"; + clock-frequency = <400000>; + + /* MAX34417 @ 0x12 */ + /* MAX34417 @ 0x1a */ + /* MAX34417 @ 0x1e */ +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/cdsp.mdt"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/modem.mdt"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/slpi.mdt"; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; + + da7280_intr_default: da7280-intr-default { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; + input-enable; + }; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 3774f8e63416..53edf7541169 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -349,22 +349,26 @@ }; }; -&qupv3_id_1 { +&gmu { status = "okay"; }; -&pon { - pwrkey { - status = "okay"; - }; +&gpu { + status = "okay"; +}; - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_1 { + status = "okay"; }; &remoteproc_adsp { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts new file mode 100644 index 000000000000..3b55fdda767a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8150-sony-xperia-kumano.dtsi" + +/ { + model = "Sony Xperia 5"; + compatible = "sony,bahamut-generic", "qcom,sm8150"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts new file mode 100644 index 000000000000..6f490ec284bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8150-sony-xperia-kumano.dtsi" + +/ { + model = "Sony Xperia 1"; + compatible = "sony,griffin-generic", "qcom,sm8150"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi new file mode 100644 index 000000000000..014fe3a31548 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -0,0 +1,452 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &mpss_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; + +/ { + qcom,msm-id = <339 0x20000>; /* SM8150 v2 */ + qcom,board-id = <8 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + width = <1644>; + height = <3840>; + stride = <(1644 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet (& no dispcc either).. + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + mpss_mem: memory@8dc00000 { + reg = <0x0 0x8dc00000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@97200000 { + reg = <0x0 0x97200000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97700000 { + reg = <0x0 0x97700000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98b00000 { + reg = <0x0 0x98b00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98b10000 { + reg = <0x0 0x98b10000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98b15000 { + reg = <0x0 0x98b15000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98c00000 { + reg = <0x0 0x98c00000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98d00000 { + reg = <0x0 0x98d00000 0x0 0x1400000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2400000>; + no-map; + }; + + cdsp_sec_mem: memory@a4c00000 { + reg = <0x0 0xa4c00000 0x0 0x3c00000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp_mem { + reg = <0x0 0x8be00000 0x0 0x1e00000>; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s2a_0p6: smps2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s1c_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PM8009 is not present on these boards, even if downstream sources suggest so. */ +}; + +&i2c4 { + status = "okay"; + + /* Qcom SMB1355 @ c */ + /* Qcom SMB1390 @ 10 */ + /* NXP PN553 NFC @ 28 */ + /* Qcom FSA4480 USB-C audio switch @ 43 */ +}; + +&i2c7 { + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c10 { + status = "okay"; + + /* Samsung touchscreen @ 48 */ +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l18a_0p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 51235a9521c2..612dda0fef43 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -4,6 +4,7 @@ * Copyright (c) 2019, Linaro Limited */ +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -577,6 +578,29 @@ <&sleep_clk>; }; + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0x800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x00d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -695,6 +719,29 @@ }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0xa00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0616 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -795,6 +842,29 @@ }; }; + gpi_dma2: dma-controller@c00000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0xc00000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x07b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_2: geniqup@cc0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00cc0000 0x0 0x6000>; @@ -1082,6 +1152,8 @@ qcom,gmu = <&gmu>; + status = "disabled"; + zap-shader { memory-region = <&gpu_mem>; }; @@ -1149,6 +1221,8 @@ operating-points-v2 = <&gmu_opp_table>; + status = "disabled"; + gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1496,6 +1570,8 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + glink-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; @@ -2268,7 +2344,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index c3a2c5aa6fe9..47742816ac2f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -6,7 +6,6 @@ /dts-v1/; #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include <dt-bindings/gpio/gpio.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -365,22 +364,26 @@ }; }; -&qupv3_id_1 { +&gmu { status = "okay"; }; -&pon { - pwrkey { - status = "okay"; - }; +&gpu { + status = "okay"; +}; - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_1 { + status = "okay"; }; &tlmm { @@ -452,3 +455,7 @@ &usb_2_dwc3 { dr_mode = "host"; }; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index cfc4d1febe0f..062b944be91d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -465,7 +465,13 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sm8250/a650_zap.mbn"; @@ -691,3 +697,7 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p9>; }; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts new file mode 100644 index 000000000000..79afeb07f4a2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 1 II"; + compatible = "sony,pdx203-generic", "qcom,sm8250"; +}; + +/delete-node/ &vreg_l7f_1p8; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts new file mode 100644 index 000000000000..16c96e838534 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 5 II"; + compatible = "sony,pdx206-generic", "qcom,sm8250"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; + +&gpio_keys { + g-assist-key { + label = "Google Assistant Key"; + linux,code = <KEY_LEFTMETA>; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; +}; + +&vreg_l2f_1p3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi new file mode 100644 index 000000000000..d63f7a9bc4e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -0,0 +1,636 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &spss_mem; +/delete-node/ &cdsp_secure_heap; + +/ { + qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + width = <1644>; + height = <3840>; + stride = <(1644 * 4)>; + format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>; + power-domains = <&dispcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + /* + * Camera focus (light press) and camera snapshot (full press) + * seem not to work properly.. Adding the former one stalls the CPU + * and the latter kills the volume down key for whatever reason. In any + * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). + */ + + vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + adsp_mem: memory@8a100000 { + reg = <0x0 0x8a100000 0x0 0x2500000>; + no-map; + }; + + spss_mem: memory@8c600000 { + reg = <0x0 0x8c600000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@8c700000 { + reg = <0x0 0x8c700000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + status = "okay"; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>; + vdd-l6-l9-supply = <&vreg_s8c_1p2>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p6: smps6 { + regulator-name = "vreg_s6a_0p6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p2>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p2: smps8 { + regulator-name = "vreg_s8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p2>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP PN553 NFC @ 28 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <1000000>; + + /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <39 0x2008>; + /* It's "vddio" downstream but it works anyway! */ + vdd-supply = <&vreg_l1c_1p8>; + avdd-supply = <&vreg_l10c_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1390 @ 10 */ + /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ + /* Qcom SMB1390_slave @ 18 */ + /* HALO HL6111R Qi charger @ 25 */ + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; + + pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>; +}; + +&pcie2_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEUP>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>, <52 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + mdm2ap_default: mdm2ap-default { + pins = "gpio1", "gpio3"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + ts_int_default: ts-int-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-disabled; + input-enable; + }; + + ap2mdm_default: ap2mdm-default { + pins = "gpio56", "gpio57"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio77"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&uart12 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 4c0de12aaba6..4798368b02ef 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -519,6 +521,26 @@ }; }; + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00800000 0 0x70000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x76 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -714,6 +736,29 @@ }; }; + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00900000 0 0x70000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <15>; + dma-channel-mask = <0x7ff>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; @@ -961,6 +1006,26 @@ }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00a00000 0 0x70000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -1249,6 +1314,12 @@ phys = <&pcie0_lane>; phy-names = "pciephy"; + perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + status = "disabled"; }; @@ -1347,6 +1418,12 @@ phys = <&pcie1_lane>; phy-names = "pciephy"; + perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + status = "disabled"; }; @@ -1447,6 +1524,12 @@ phys = <&pcie2_lane>; phy-names = "pciephy"; + perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; + status = "disabled"; }; @@ -1470,7 +1553,7 @@ status = "disabled"; - pcie2_lane: lanes@1c0e200 { + pcie2_lane: lanes@1c16200 { reg = <0 0x1c16200 0 0x170>, /* tx0 */ <0 0x1c16400 0 0x200>, /* rx0 */ <0 0x1c16a00 0 0x1f0>, /* pcs */ @@ -1746,6 +1829,8 @@ qcom,gmu = <&gmu>; + status = "disabled"; + zap-shader { memory-region = <&gpu_mem>; }; @@ -1819,6 +1904,8 @@ operating-points-v2 = <&gmu_opp_table>; + status = "disabled"; + gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2323,6 +2410,8 @@ <&videocc VIDEO_CC_MVS0C_CLK_ARES>; reset-names = "bus", "core"; + status = "disabled"; + video-decoder { compatible = "venus-decoder"; }; @@ -2370,7 +2459,7 @@ }; mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; + compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -2402,7 +2491,7 @@ ranges; mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; + compatible = "qcom,sm8250-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; reg-names = "mdp", "vbif"; @@ -2424,8 +2513,6 @@ interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2499,6 +2586,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -2566,6 +2656,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3395,6 +3488,95 @@ output-high; }; }; + + sdc2_sleep_state: sdc2-sleep { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio80"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio81"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio82"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio83"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_default_state: pcie2-default { + perst { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio86"; + function = "pci_e2"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; apps_smmu: iommu@15000000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 6ca638b4e321..93740444dd1e 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -364,3 +364,9 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l5b_0p88>; }; + +&ipa { + status = "okay"; + + memory-region = <&pil_ipa_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index ed0b51bc03ea..0d16392bb976 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -6,11 +6,13 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interconnect/qcom,sm8350.h> / { interrupt-parent = <&intc>; @@ -391,6 +393,17 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; smp2p-slpi { @@ -629,6 +642,45 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ipa: ipa@1e40000 { + compatible = "qcom,sm8350-ipa"; + + iommus = <&apps_smmu 0x5c0 0x0>, + <&apps_smmu 0x5c2 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4b20>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>, + <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnect-names = "ipa_to_llcc", + "llcc_to_ebi1", + "appss_to_ipa"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -656,7 +708,7 @@ <&rpmhpd 12>; power-domain-names = "load_state", "cx", "mss"; - interconnects = <&mc_virt 0 &mc_virt 1>; + interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; memory-region = <&pil_modem_mem>; @@ -689,7 +741,7 @@ interrupt-controller; }; - tsens0: thermal-sensor@c222000 { + tsens0: thermal-sensor@c263000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ @@ -700,7 +752,7 @@ #thermal-sensor-cells = <1>; }; - tsens1: thermal-sensor@c223000 { + tsens1: thermal-sensor@c265000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ @@ -1063,7 +1115,7 @@ <&rpmhpd 10>; power-domain-names = "load_state", "cx", "mxc"; - interconnects = <&compute_noc 1 &mc_virt 1>; + interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; memory-region = <&pil_cdsp_mem>; @@ -1176,7 +1228,7 @@ }; }; - dc_noc: interconnect@90e0000 { + dc_noc: interconnect@90c0000 { compatible = "qcom,sm8350-dc-noc"; reg = <0 0x090c0000 0 0x4200>; #interconnect-cells = <1>; @@ -1317,7 +1369,7 @@ }; }; - thermal-zones { + thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index f2de2fa0c8b8..68e30e26564b 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -62,3 +62,5 @@ dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb + +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index d8046fedf9c1..e3c8b2fe143e 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -271,12 +271,12 @@ &ehci0 { dr_mode = "otg"; status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>; }; &ehci1 { status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>; }; &hdmi0 { diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 8d3a4d6ee885..090dc9c4f57b 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -53,6 +53,8 @@ phy-handle = <&phy0>; rx-internal-delay-ps = <1800>; tx-internal-delay-ps = <2000>; + clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>; + clock-names = "fck", "refclk"; status = "okay"; phy0: ethernet-phy@0 { @@ -319,8 +321,10 @@ status = "okay"; }; -&usb_extal_clk { - clock-frequency = <50000000>; +&usb2_clksel { + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&versaclock5 3>, <&usb3s0_clk>; + status = "okay"; }; &usb3s0_clk { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 46f8dbf68904..78c121a89f11 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -76,6 +76,7 @@ opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <820000>; clock-latency-ns = <300000>; + opp-suspend; }; }; @@ -1127,6 +1128,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index d16a4be5ef77..28c612ce49c0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -1001,6 +1001,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 1aef34447abd..a5d4dce8476d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -957,6 +957,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 1f51237ab0a6..379a1300272b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1230,6 +1230,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 85d66d15465a..2e4c18b8eee4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -1312,6 +1312,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 12476e354d74..2bd8169735d3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -63,18 +63,19 @@ opp-500000000 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; }; opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; + opp-suspend; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; @@ -1188,6 +1189,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index d9804768425a..91b501e0121e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -52,18 +52,19 @@ opp-500000000 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; }; opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <820000>; + opp-microvolt = <830000>; clock-latency-ns = <300000>; + opp-suspend; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; @@ -559,10 +560,19 @@ }; intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77961", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - /* placeholder */ + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; tmu0: timer@e61e0000 { @@ -1144,6 +1154,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index dcb9df861d74..ad69da362a72 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1050,6 +1050,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 874a7fc2730b..5c84681703ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -73,6 +73,12 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &avb { @@ -104,6 +110,8 @@ }; &du { + clocks = <&cpg CPG_MOD 724>, <&x1_clk>; + clock-names = "du.0", "dclkin.0"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 7417cf5fea0f..2426e533128c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -59,7 +59,7 @@ memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; + reg = <0x0 0x48000000 0x0 0x78000000>; }; osc5_clk: osc5-clock { diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index e8f6352c3665..517892cf6294 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -612,6 +612,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 04d47c0c9bb9..7bde0a549c09 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -210,7 +210,7 @@ &mmc0 { pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins_uhs>; + pinctrl-1 = <&mmc_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <&d3_3v>; @@ -255,12 +255,6 @@ mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; - power-source = <3300>; - }; - - mmc_pins_uhs: mmc_uhs { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; power-source = <1800>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 7b51d464de0e..6347d15e66b6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -664,6 +664,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 0eaea58f4210..4d0304bc9745 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1000,6 +1000,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 2319271c881b..84dba3719381 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -760,6 +760,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi index 14d3db5d6c16..f791c76f1bcf 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi @@ -6,6 +6,27 @@ */ &i2c0 { + pca9654_a: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9654_b: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9654_c: gpio@23 { + compatible = "onnn,pca9654"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + eeprom@52 { compatible = "rohm,br24g01", "atmel,24c01"; label = "csi-dsi-sub-board-id"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 70b3604e56cd..78ca75f619f6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -618,6 +618,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 211>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 211>; phy-mode = "rgmii"; @@ -665,6 +666,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 212>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 212>; phy-mode = "rgmii"; @@ -712,6 +714,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 213>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 213>; phy-mode = "rgmii"; @@ -759,6 +762,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 214>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 214>; phy-mode = "rgmii"; @@ -806,6 +810,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 215>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 215>; phy-mode = "rgmii"; @@ -853,6 +858,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 216>; phy-mode = "rgmii"; @@ -1096,7 +1102,6 @@ <0x0 0xf1060000 0 0x110000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; }; fcpvd0: fcp@fea10000 { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi new file mode 100644 index 000000000000..734c8adeceba --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a07g044-cpg.h> + +/ { + compatible = "renesas,r9a07g044"; + #address-cells = <2>; + #size-cells = <2>; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CLK_SCIF0>; + status = "disabled"; + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi new file mode 100644 index 000000000000..9d89d4590358 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L R9A07G044L1 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044l1", "renesas,r9a07g044"; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + }; + + timer { + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts new file mode 100644 index 000000000000..d3f72ec62f03 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044l2.dtsi" +#include "rzg2l-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g044l2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi new file mode 100644 index 000000000000..91dc10b2cdbb --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044l2", "renesas,r9a07g044"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi new file mode 100644 index 000000000000..adcd4f50519e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC EVK common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&scif0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index c3e00c0e2db7..7fdb41de01ec 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -51,3 +51,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 09baa8a167ce..248ebb61aa79 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -244,28 +244,31 @@ #size-cells = <0>; /* These power domains are grouped by VD_LOGIC */ - pd_usb@PX30_PD_USB { + power-domain@PX30_PD_USB { reg = <PX30_PD_USB>; clocks = <&cru HCLK_HOST>, <&cru HCLK_OTG>, <&cru SCLK_OTG_ADP>; pm_qos = <&qos_usb_host>, <&qos_usb_otg>; + #power-domain-cells = <0>; }; - pd_sdcard@PX30_PD_SDCARD { + power-domain@PX30_PD_SDCARD { reg = <PX30_PD_SDCARD>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; pm_qos = <&qos_sdmmc>; + #power-domain-cells = <0>; }; - pd_gmac@PX30_PD_GMAC { + power-domain@PX30_PD_GMAC { reg = <PX30_PD_GMAC>; clocks = <&cru ACLK_GMAC>, <&cru PCLK_GMAC>, <&cru SCLK_MAC_REF>, <&cru SCLK_GMAC_RX_TX>; pm_qos = <&qos_gmac>; + #power-domain-cells = <0>; }; - pd_mmc_nand@PX30_PD_MMC_NAND { + power-domain@PX30_PD_MMC_NAND { reg = <PX30_PD_MMC_NAND>; clocks = <&cru HCLK_NANDC>, <&cru HCLK_EMMC>, @@ -277,15 +280,17 @@ <&cru SCLK_SFC>; pm_qos = <&qos_emmc>, <&qos_nand>, <&qos_sdio>, <&qos_sfc>; + #power-domain-cells = <0>; }; - pd_vpu@PX30_PD_VPU { + power-domain@PX30_PD_VPU { reg = <PX30_PD_VPU>; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>, <&cru SCLK_CORE_VPU>; pm_qos = <&qos_vpu>, <&qos_vpu_r128>; + #power-domain-cells = <0>; }; - pd_vo@PX30_PD_VO { + power-domain@PX30_PD_VO { reg = <PX30_PD_VO>; clocks = <&cru ACLK_RGA>, <&cru ACLK_VOPB>, @@ -300,8 +305,9 @@ <&cru SCLK_VOPB_PWM>; pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, <&qos_vop_m0>, <&qos_vop_m1>; + #power-domain-cells = <0>; }; - pd_vi@PX30_PD_VI { + power-domain@PX30_PD_VI { reg = <PX30_PD_VI>; clocks = <&cru ACLK_CIF>, <&cru ACLK_ISP>, @@ -311,11 +317,13 @@ pm_qos = <&qos_isp_128>, <&qos_isp_rd>, <&qos_isp_wr>, <&qos_isp_m1>, <&qos_vip>; + #power-domain-cells = <0>; }; - pd_gpu@PX30_PD_GPU { + power-domain@PX30_PD_GPU { reg = <PX30_PD_GPU>; clocks = <&cru SCLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; }; }; @@ -814,7 +822,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy: usb2-phy@100 { + u2phy: usb2phy@100 { compatible = "rockchip,px30-usb2phy"; reg = <0x100 0x20>; clocks = <&pmucru SCLK_USBPHY_REF>; @@ -1087,7 +1095,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff460f00 0x0 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; @@ -1128,7 +1135,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff470f00 0x0 0x100>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts index 3dddd4742c3a..665b2e69455d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -84,8 +84,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; - states = <1800000 0x0 - 3300000 0x1>; + states = <1800000 0x0>, + <3300000 0x1>; vin-supply = <&vcc5v0_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index b815ce73e5c6..a185901aba9a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -164,7 +164,7 @@ grf: grf@ff000000 { compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; - reg = <0x0 0xff000000 0x0 0x10000>; + reg = <0x0 0xff000000 0x0 0x08000>; reboot-mode { compatible = "syscon-reboot-mode"; @@ -177,6 +177,42 @@ }; }; + usb2phy_grf: syscon@ff008000 { + compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff008000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2phy@100 { + compatible = "rockchip,rk3308-usb2phy"; + reg = <0x100 0x10>; + assigned-clocks = <&cru USB480M>; + assigned-clock-parents = <&u2phy>; + clocks = <&cru SCLK_USBPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy"; + #clock-cells = <0>; + status = "disabled"; + + u2phy_otg: otg-port { + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy_host: host-port { + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + detect_grf: syscon@ff00b000 { compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd"; reg = <0x0 0xff00b000 0x0 0x1000>; @@ -579,6 +615,42 @@ status = "disabled"; }; + usb20_otg: usb@ff400000 { + compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host_ehci: usb@ff440000 { + compatible = "generic-ehci"; + reg = <0x0 0xff440000 0x0 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ohci: usb@ff450000 { + compatible = "generic-ohci"; + reg = <0x0 0xff450000 0x0 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + sdmmc: mmc@ff480000 { compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 49c97f76df77..7fc674a99a6c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -165,6 +165,31 @@ }; }; + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Analog"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + vccsys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc3v8_sys"; @@ -239,6 +264,7 @@ backlight = <&backlight>; iovcc-supply = <&vcc_lcd>; reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + rotation = <270>; vdd-supply = <&vcc_lcd>; port { @@ -269,11 +295,14 @@ reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; wakeup-source; #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "xin32k"; + #sound-dai-cells = <0>; vcc1-supply = <&vccsys>; vcc2-supply = <&vccsys>; @@ -432,6 +461,10 @@ }; }; }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index f807bc066ccb..3857d487ab84 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -14,6 +14,7 @@ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; aliases { + ethernet1 = &rtl8153; mmc0 = &sdmmc; }; @@ -76,8 +77,8 @@ regulator-settling-time-us = <5000>; regulator-type = "voltage"; startup-delay-us = <2000>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; vin-supply = <&vcc_io_33>; }; @@ -101,6 +102,18 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vdd_5v_lan: vdd-5v-lan { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; }; &cpu0 { @@ -309,6 +322,12 @@ }; }; + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -368,6 +387,19 @@ dr_mode = "host"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index a05732b59f38..aa22a0c22265 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -50,8 +50,8 @@ vcc_sdio: sdmmcio-regulator { compatible = "regulator-gpio"; gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; regulator-name = "vcc_sdio"; regulator-type = "voltage"; regulator-min-microvolt = <1800000>; @@ -363,6 +363,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts index c7e31efdd2e1..018a3a5075c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -177,8 +177,6 @@ }; &gmac2phy { - pinctrl-names = "default"; - pinctrl-0 = <&fephyled_linkm1>, <&fephyled_rxm1>; status = "okay"; }; @@ -382,6 +380,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 3bef1f39bc6e..1b0f7e4551ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -381,6 +381,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 3ed69ecbcf3c..8c821acb21ff 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -288,7 +288,7 @@ status = "disabled"; }; - grf_gpio: grf-gpio { + grf_gpio: gpio { compatible = "rockchip,rk3328-grf-gpio"; gpio-controller; #gpio-cells = <2>; @@ -300,15 +300,18 @@ #address-cells = <1>; #size-cells = <0>; - pd_hevc@RK3328_PD_HEVC { + power-domain@RK3328_PD_HEVC { reg = <RK3328_PD_HEVC>; + #power-domain-cells = <0>; }; - pd_video@RK3328_PD_VIDEO { + power-domain@RK3328_PD_VIDEO { reg = <RK3328_PD_VIDEO>; + #power-domain-cells = <0>; }; - pd_vpu@RK3328_PD_VPU { + power-domain@RK3328_PD_VPU { reg = <RK3328_PD_VPU>; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + #power-domain-cells = <0>; }; }; @@ -816,7 +819,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy: usb2-phy@100 { + u2phy: usb2phy@100 { compatible = "rockchip,rk3328-usb2phy"; reg = <0x100 0x10>; clocks = <&xin24m>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index dfc6376171d0..4c64fbefb483 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -664,6 +664,8 @@ compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; reg = <0x0 0xff810000 0x0 0x20>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; + clock-names = "pclk", "timer"; }; spdif: spdif@ff880000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 45254be1350d..c4dd2a6b4836 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -94,6 +95,13 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -151,6 +159,23 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -196,6 +221,17 @@ vin-supply = <&vcc_sys>; }; + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -521,6 +557,53 @@ i2c-scl-falling-time-ns = <20>; status = "okay"; + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; + accelerometer@68 { compatible = "invensense,mpu6500"; reg = <0x68>; @@ -578,12 +661,34 @@ }; }; + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + leds { + work_led_pin: work-led-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_pin: diy-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -595,6 +700,10 @@ }; pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; @@ -604,21 +713,21 @@ }; }; - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - rt5640 { rt5640_hpcon: rt5640-hpcon { rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -633,16 +742,6 @@ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - leds { - work_led_pin: work-led-pin { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_pin: diy-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &pwm0 { @@ -710,10 +809,29 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + status = "okay"; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &tcphy0 { status = "okay"; }; +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -737,6 +855,12 @@ phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; }; &u2phy1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index beee5fbb3443..5d7a9d96d163 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -245,7 +245,7 @@ pp1800_pcie: &pp1800_s0 { }; &ppvar_sd_card_io { - states = <1800000 0x0 3300000 0x1>; + states = <1800000 0x0>, <3300000 0x1>; regulator-max-microvolt = <3300000>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 4002742fed4c..c1bcc8ca3769 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -252,8 +252,8 @@ enable-active-high; enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3000000 0x0>; + states = <1800000 0x1>, + <3000000 0x0>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 19485b552bc4..738cfd21df3e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -23,6 +23,16 @@ mmc1 = &sdhci; }; + avdd_0v9_s0: avdd-0v9-s0 { + compatible = "regulator-fixed"; + regulator-name = "avdd_0v9_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc1v8_sys_s3>; + }; + avdd_1v8_s0: avdd-1v8-s0 { compatible = "regulator-fixed"; regulator-name = "avdd_1v8_s0"; @@ -40,6 +50,20 @@ #clock-cells = <0>; }; + fan1 { + /* fan connected to P7 */ + compatible = "pwm-fan"; + pwms = <&pwm0 0 40000 0>; + cooling-levels = <0 80 170 255>; + }; + + fan2 { + /* fan connected to P6 */ + compatible = "pwm-fan"; + pwms = <&pwm1 0 40000 0>; + cooling-levels = <0 80 170 255>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -58,6 +82,18 @@ }; }; + pcie_power: pcie-power { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie_pwr>; + pinctrl-names = "default"; + regulator-boot-on; + regulator-name = "pcie_power"; + startup-delay-us = <10000>; + vin-supply = <&vcc5v0_perdev>; + }; + vcc1v8_sys_s0: vcc1v8-sys-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_sys_s0"; @@ -95,6 +131,16 @@ }; }; + vcc5v0_perdev: vcc5v0-perdev { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_perdev"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin_bkup>; + }; + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -109,6 +155,20 @@ }; }; + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_en>; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_perdev>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -317,6 +377,20 @@ status = "okay"; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + num-lanes = <2>; + status = "okay"; + + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&pcie_power>; + vpcie1v8-supply = <&avdd_1v8_s0>; + vpcie0v9-supply = <&avdd_0v9_s0>; +}; + &pinctrl { gmac { gphy_reset: gphy-reset { @@ -334,12 +408,25 @@ }; }; + pcie { + pcie_pwr: pcie-pwr { + rockchip,pins = + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + power { + vcc5v0_usb_en: vcc5v0-usb-en { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vcc3v0-sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; @@ -352,6 +439,16 @@ status = "okay"; }; +&pwm0 { + /* pwm-fan on P7 */ + status = "okay"; +}; + +&pwm1 { + /* pwm-fan on P6 */ + status = "okay"; +}; + &sdhci { bus-width = <8>; mmc-hs200-1_8v; @@ -372,6 +469,30 @@ status = "okay"; }; +&tcphy1 { + /* phy for &usbdrd_dwc3_1 */ + status = "okay"; +}; + +&u2phy1 { + status = "okay"; + + otg-port { + /* phy for &usbdrd_dwc3_1 */ + phy-supply = <&vcc5v0_usb>; + status = "okay"; + }; +}; + &uart2 { status = "okay"; }; + +&usbdrd3_1 { + status = "okay"; + + usb@fe900000 { + dr_mode = "host"; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts index fa5809887643..cef4d18b599d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts @@ -33,7 +33,7 @@ sys_led: led-sys { gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - label = "red:sys"; + label = "red:power"; default-state = "on"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 16fd58c4a80f..8c0ff6c96e03 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -510,7 +510,6 @@ }; &pcie0 { - max-link-speed = <2>; num-lanes = <2>; vpcie0v9-supply = <&vcca0v9_s3>; vpcie1v8-supply = <&vcca1v8_s3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index c172f5a803e7..d1aaf8e83391 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -63,6 +63,13 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -389,6 +396,7 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -493,6 +501,8 @@ regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { @@ -601,6 +611,12 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 7d0a7c697703..b28888ea9262 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -474,7 +474,6 @@ &pcie0 { ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <4>; pinctrl-0 = <&pcie_clkreqnb_cpm>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 4b854eb21f72..3871c7fd83b0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -968,126 +968,146 @@ #size-cells = <0>; /* These power domains are grouped by VD_CENTER */ - pd_iep@RK3399_PD_IEP { + power-domain@RK3399_PD_IEP { reg = <RK3399_PD_IEP>; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; pm_qos = <&qos_iep>; + #power-domain-cells = <0>; }; - pd_rga@RK3399_PD_RGA { + power-domain@RK3399_PD_RGA { reg = <RK3399_PD_RGA>; clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>; pm_qos = <&qos_rga_r>, <&qos_rga_w>; + #power-domain-cells = <0>; }; - pd_vcodec@RK3399_PD_VCODEC { + power-domain@RK3399_PD_VCODEC { reg = <RK3399_PD_VCODEC>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; pm_qos = <&qos_video_m0>; + #power-domain-cells = <0>; }; - pd_vdu@RK3399_PD_VDU { + power-domain@RK3399_PD_VDU { reg = <RK3399_PD_VDU>; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; pm_qos = <&qos_video_m1_r>, <&qos_video_m1_w>; + #power-domain-cells = <0>; }; /* These power domains are grouped by VD_GPU */ - pd_gpu@RK3399_PD_GPU { + power-domain@RK3399_PD_GPU { reg = <RK3399_PD_GPU>; clocks = <&cru ACLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; /* These power domains are grouped by VD_LOGIC */ - pd_edp@RK3399_PD_EDP { + power-domain@RK3399_PD_EDP { reg = <RK3399_PD_EDP>; clocks = <&cru PCLK_EDP_CTRL>; + #power-domain-cells = <0>; }; - pd_emmc@RK3399_PD_EMMC { + power-domain@RK3399_PD_EMMC { reg = <RK3399_PD_EMMC>; clocks = <&cru ACLK_EMMC>; pm_qos = <&qos_emmc>; + #power-domain-cells = <0>; }; - pd_gmac@RK3399_PD_GMAC { + power-domain@RK3399_PD_GMAC { reg = <RK3399_PD_GMAC>; clocks = <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; pm_qos = <&qos_gmac>; + #power-domain-cells = <0>; }; - pd_sd@RK3399_PD_SD { + power-domain@RK3399_PD_SD { reg = <RK3399_PD_SD>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; pm_qos = <&qos_sd>; + #power-domain-cells = <0>; }; - pd_sdioaudio@RK3399_PD_SDIOAUDIO { + power-domain@RK3399_PD_SDIOAUDIO { reg = <RK3399_PD_SDIOAUDIO>; clocks = <&cru HCLK_SDIO>; pm_qos = <&qos_sdioaudio>; + #power-domain-cells = <0>; }; - pd_tcpc0@RK3399_PD_TCPD0 { + power-domain@RK3399_PD_TCPD0 { reg = <RK3399_PD_TCPD0>; clocks = <&cru SCLK_UPHY0_TCPDCORE>, <&cru SCLK_UPHY0_TCPDPHY_REF>; + #power-domain-cells = <0>; }; - pd_tcpc1@RK3399_PD_TCPD1 { + power-domain@RK3399_PD_TCPD1 { reg = <RK3399_PD_TCPD1>; clocks = <&cru SCLK_UPHY1_TCPDCORE>, <&cru SCLK_UPHY1_TCPDPHY_REF>; + #power-domain-cells = <0>; }; - pd_usb3@RK3399_PD_USB3 { + power-domain@RK3399_PD_USB3 { reg = <RK3399_PD_USB3>; clocks = <&cru ACLK_USB3>; pm_qos = <&qos_usb_otg0>, <&qos_usb_otg1>; + #power-domain-cells = <0>; }; - pd_vio@RK3399_PD_VIO { + power-domain@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; + #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - pd_hdcp@RK3399_PD_HDCP { + power-domain@RK3399_PD_HDCP { reg = <RK3399_PD_HDCP>; clocks = <&cru ACLK_HDCP>, <&cru HCLK_HDCP>, <&cru PCLK_HDCP>; pm_qos = <&qos_hdcp>; + #power-domain-cells = <0>; }; - pd_isp0@RK3399_PD_ISP0 { + power-domain@RK3399_PD_ISP0 { reg = <RK3399_PD_ISP0>; clocks = <&cru ACLK_ISP0>, <&cru HCLK_ISP0>; pm_qos = <&qos_isp0_m0>, <&qos_isp0_m1>; + #power-domain-cells = <0>; }; - pd_isp1@RK3399_PD_ISP1 { + power-domain@RK3399_PD_ISP1 { reg = <RK3399_PD_ISP1>; clocks = <&cru ACLK_ISP1>, <&cru HCLK_ISP1>; pm_qos = <&qos_isp1_m0>, <&qos_isp1_m1>; + #power-domain-cells = <0>; }; - pd_vo@RK3399_PD_VO { + power-domain@RK3399_PD_VO { reg = <RK3399_PD_VO>; + #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - pd_vopb@RK3399_PD_VOPB { + power-domain@RK3399_PD_VOPB { reg = <RK3399_PD_VOPB>; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; pm_qos = <&qos_vop_big_r>, <&qos_vop_big_w>; + #power-domain-cells = <0>; }; - pd_vopl@RK3399_PD_VOPL { + power-domain@RK3399_PD_VOPL { reg = <RK3399_PD_VOPL>; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; pm_qos = <&qos_vop_little>; + #power-domain-cells = <0>; }; }; }; @@ -1398,7 +1418,7 @@ status = "disabled"; }; - u2phy0: usb2-phy@e450 { + u2phy0: usb2phy@e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; clocks = <&cru SCLK_USB2PHY0_REF>; @@ -1425,7 +1445,7 @@ }; }; - u2phy1: usb2-phy@e460 { + u2phy1: usb2phy@e460 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe460 0x10>; clocks = <&cru SCLK_USB2PHY1_REF>; @@ -2354,7 +2374,7 @@ }; }; - sleep { + suspend { ap_pwroff: ap-pwroff { rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index c0074b3ed4af..01d1a75c8b4d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -329,7 +329,6 @@ &pcie0 { ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <4>; pinctrl-0 = <&pcie_clkreqnb_cpm>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts new file mode 100644 index 000000000000..69786557093d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3568.dtsi" + +/ { + model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; + compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_lcd0_n: vcc3v3-lcd0-n { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd0_n"; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_lcd1_n: vcc3v3-lcd1-n { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd1_n"; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi new file mode 100644 index 000000000000..a588ca95ace2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi @@ -0,0 +1,3111 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/pinctrl/rockchip.h> +#include "rockchip-pinconf.dtsi" + +/* + * This file is auto generated by pin2dts tool, please keep these code + * by adding changes at end of this file. + */ +&pinctrl { + acodec { + /omit-if-no-ref/ + acodec_pins: acodec-pins { + rockchip,pins = + /* acodec_adc_sync */ + <1 RK_PB1 5 &pcfg_pull_none>, + /* acodec_adcclk */ + <1 RK_PA1 5 &pcfg_pull_none>, + /* acodec_adcdata */ + <1 RK_PA0 5 &pcfg_pull_none>, + /* acodec_dac_datal */ + <1 RK_PA7 5 &pcfg_pull_none>, + /* acodec_dac_datar */ + <1 RK_PB0 5 &pcfg_pull_none>, + /* acodec_dacclk */ + <1 RK_PA3 5 &pcfg_pull_none>, + /* acodec_dacsync */ + <1 RK_PA5 5 &pcfg_pull_none>; + }; + }; + + audiopwm { + /omit-if-no-ref/ + audiopwm_lout: audiopwm-lout { + rockchip,pins = + /* audiopwm_lout */ + <1 RK_PA0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + audiopwm_loutn: audiopwm-loutn { + rockchip,pins = + /* audiopwm_loutn */ + <1 RK_PA1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + audiopwm_loutp: audiopwm-loutp { + rockchip,pins = + /* audiopwm_loutp */ + <1 RK_PA0 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + audiopwm_rout: audiopwm-rout { + rockchip,pins = + /* audiopwm_rout */ + <1 RK_PA1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + audiopwm_routn: audiopwm-routn { + rockchip,pins = + /* audiopwm_routn */ + <1 RK_PA7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + audiopwm_routp: audiopwm-routp { + rockchip,pins = + /* audiopwm_routp */ + <1 RK_PA6 4 &pcfg_pull_none>; + }; + }; + + bt656 { + /omit-if-no-ref/ + bt656m0_pins: bt656m0-pins { + rockchip,pins = + /* bt656_clkm0 */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* bt656_d0m0 */ + <2 RK_PD0 2 &pcfg_pull_none>, + /* bt656_d1m0 */ + <2 RK_PD1 2 &pcfg_pull_none>, + /* bt656_d2m0 */ + <2 RK_PD2 2 &pcfg_pull_none>, + /* bt656_d3m0 */ + <2 RK_PD3 2 &pcfg_pull_none>, + /* bt656_d4m0 */ + <2 RK_PD4 2 &pcfg_pull_none>, + /* bt656_d5m0 */ + <2 RK_PD5 2 &pcfg_pull_none>, + /* bt656_d6m0 */ + <2 RK_PD6 2 &pcfg_pull_none>, + /* bt656_d7m0 */ + <2 RK_PD7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + bt656m1_pins: bt656m1-pins { + rockchip,pins = + /* bt656_clkm1 */ + <4 RK_PB4 5 &pcfg_pull_none>, + /* bt656_d0m1 */ + <3 RK_PC6 5 &pcfg_pull_none>, + /* bt656_d1m1 */ + <3 RK_PC7 5 &pcfg_pull_none>, + /* bt656_d2m1 */ + <3 RK_PD0 5 &pcfg_pull_none>, + /* bt656_d3m1 */ + <3 RK_PD1 5 &pcfg_pull_none>, + /* bt656_d4m1 */ + <3 RK_PD2 5 &pcfg_pull_none>, + /* bt656_d5m1 */ + <3 RK_PD3 5 &pcfg_pull_none>, + /* bt656_d6m1 */ + <3 RK_PD4 5 &pcfg_pull_none>, + /* bt656_d7m1 */ + <3 RK_PD5 5 &pcfg_pull_none>; + }; + }; + + bt1120 { + /omit-if-no-ref/ + bt1120_pins: bt1120-pins { + rockchip,pins = + /* bt1120_clk */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* bt1120_d0 */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* bt1120_d1 */ + <3 RK_PA2 2 &pcfg_pull_none>, + /* bt1120_d2 */ + <3 RK_PA3 2 &pcfg_pull_none>, + /* bt1120_d3 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* bt1120_d4 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* bt1120_d5 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* bt1120_d6 */ + <3 RK_PB0 2 &pcfg_pull_none>, + /* bt1120_d7 */ + <3 RK_PB1 2 &pcfg_pull_none>, + /* bt1120_d8 */ + <3 RK_PB2 2 &pcfg_pull_none>, + /* bt1120_d9 */ + <3 RK_PB3 2 &pcfg_pull_none>, + /* bt1120_d10 */ + <3 RK_PB4 2 &pcfg_pull_none>, + /* bt1120_d11 */ + <3 RK_PB5 2 &pcfg_pull_none>, + /* bt1120_d12 */ + <3 RK_PB6 2 &pcfg_pull_none>, + /* bt1120_d13 */ + <3 RK_PC1 2 &pcfg_pull_none>, + /* bt1120_d14 */ + <3 RK_PC2 2 &pcfg_pull_none>, + /* bt1120_d15 */ + <3 RK_PC3 2 &pcfg_pull_none>; + }; + }; + + cam { + /omit-if-no-ref/ + cam_clkout0: cam-clkout0 { + rockchip,pins = + /* cam_clkout0 */ + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cam_clkout1: cam-clkout1 { + rockchip,pins = + /* cam_clkout1 */ + <4 RK_PB0 1 &pcfg_pull_none>; + }; + }; + + can0 { + /omit-if-no-ref/ + can0m0_pins: can0m0-pins { + rockchip,pins = + /* can0_rxm0 */ + <0 RK_PB4 2 &pcfg_pull_none>, + /* can0_txm0 */ + <0 RK_PB3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can0m1_pins: can0m1-pins { + rockchip,pins = + /* can0_rxm1 */ + <2 RK_PA2 4 &pcfg_pull_none>, + /* can0_txm1 */ + <2 RK_PA1 4 &pcfg_pull_none>; + }; + }; + + can1 { + /omit-if-no-ref/ + can1m0_pins: can1m0-pins { + rockchip,pins = + /* can1_rxm0 */ + <1 RK_PA0 3 &pcfg_pull_none>, + /* can1_txm0 */ + <1 RK_PA1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can1m1_pins: can1m1-pins { + rockchip,pins = + /* can1_rxm1 */ + <4 RK_PC2 3 &pcfg_pull_none>, + /* can1_txm1 */ + <4 RK_PC3 3 &pcfg_pull_none>; + }; + }; + + can2 { + /omit-if-no-ref/ + can2m0_pins: can2m0-pins { + rockchip,pins = + /* can2_rxm0 */ + <4 RK_PB4 3 &pcfg_pull_none>, + /* can2_txm0 */ + <4 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can2m1_pins: can2m1-pins { + rockchip,pins = + /* can2_rxm1 */ + <2 RK_PB1 4 &pcfg_pull_none>, + /* can2_txm1 */ + <2 RK_PB2 4 &pcfg_pull_none>; + }; + }; + + cif { + /omit-if-no-ref/ + cif_clk: cif-clk { + rockchip,pins = + /* cif_clkout */ + <4 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_clk: cif-dvp-clk { + rockchip,pins = + /* cif_clkin */ + <4 RK_PC1 1 &pcfg_pull_none>, + /* cif_href */ + <4 RK_PB6 1 &pcfg_pull_none>, + /* cif_vsync */ + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_bus16: cif-dvp-bus16 { + rockchip,pins = + /* cif_d8 */ + <3 RK_PD6 1 &pcfg_pull_none>, + /* cif_d9 */ + <3 RK_PD7 1 &pcfg_pull_none>, + /* cif_d10 */ + <4 RK_PA0 1 &pcfg_pull_none>, + /* cif_d11 */ + <4 RK_PA1 1 &pcfg_pull_none>, + /* cif_d12 */ + <4 RK_PA2 1 &pcfg_pull_none>, + /* cif_d13 */ + <4 RK_PA3 1 &pcfg_pull_none>, + /* cif_d14 */ + <4 RK_PA4 1 &pcfg_pull_none>, + /* cif_d15 */ + <4 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_bus8: cif-dvp-bus8 { + rockchip,pins = + /* cif_d0 */ + <3 RK_PC6 1 &pcfg_pull_none>, + /* cif_d1 */ + <3 RK_PC7 1 &pcfg_pull_none>, + /* cif_d2 */ + <3 RK_PD0 1 &pcfg_pull_none>, + /* cif_d3 */ + <3 RK_PD1 1 &pcfg_pull_none>, + /* cif_d4 */ + <3 RK_PD2 1 &pcfg_pull_none>, + /* cif_d5 */ + <3 RK_PD3 1 &pcfg_pull_none>, + /* cif_d6 */ + <3 RK_PD4 1 &pcfg_pull_none>, + /* cif_d7 */ + <3 RK_PD5 1 &pcfg_pull_none>; + }; + }; + + clk32k { + /omit-if-no-ref/ + clk32k_in: clk32k-in { + rockchip,pins = + /* clk32k_in */ + <0 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + clk32k_out0: clk32k-out0 { + rockchip,pins = + /* clk32k_out0 */ + <0 RK_PB0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + clk32k_out1: clk32k-out1 { + rockchip,pins = + /* clk32k_out1 */ + <2 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + cpu { + /omit-if-no-ref/ + cpu_pins: cpu-pins { + rockchip,pins = + /* cpu_avs */ + <0 RK_PB7 2 &pcfg_pull_none>; + }; + }; + + ebc { + /omit-if-no-ref/ + ebc_extern: ebc-extern { + rockchip,pins = + /* ebc_sdce1 */ + <4 RK_PA7 2 &pcfg_pull_none>, + /* ebc_sdce2 */ + <4 RK_PB0 2 &pcfg_pull_none>, + /* ebc_sdce3 */ + <4 RK_PB1 2 &pcfg_pull_none>, + /* ebc_sdshr */ + <4 RK_PB5 2 &pcfg_pull_none>, + /* ebc_vcom */ + <4 RK_PB2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + ebc_pins: ebc-pins { + rockchip,pins = + /* ebc_gdclk */ + <4 RK_PC0 2 &pcfg_pull_none>, + /* ebc_gdoe */ + <4 RK_PB3 2 &pcfg_pull_none>, + /* ebc_gdsp */ + <4 RK_PB4 2 &pcfg_pull_none>, + /* ebc_sdce0 */ + <4 RK_PA6 2 &pcfg_pull_none>, + /* ebc_sdclk */ + <4 RK_PC1 2 &pcfg_pull_none>, + /* ebc_sddo0 */ + <3 RK_PC6 2 &pcfg_pull_none>, + /* ebc_sddo1 */ + <3 RK_PC7 2 &pcfg_pull_none>, + /* ebc_sddo2 */ + <3 RK_PD0 2 &pcfg_pull_none>, + /* ebc_sddo3 */ + <3 RK_PD1 2 &pcfg_pull_none>, + /* ebc_sddo4 */ + <3 RK_PD2 2 &pcfg_pull_none>, + /* ebc_sddo5 */ + <3 RK_PD3 2 &pcfg_pull_none>, + /* ebc_sddo6 */ + <3 RK_PD4 2 &pcfg_pull_none>, + /* ebc_sddo7 */ + <3 RK_PD5 2 &pcfg_pull_none>, + /* ebc_sddo8 */ + <3 RK_PD6 2 &pcfg_pull_none>, + /* ebc_sddo9 */ + <3 RK_PD7 2 &pcfg_pull_none>, + /* ebc_sddo10 */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* ebc_sddo11 */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* ebc_sddo12 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* ebc_sddo13 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* ebc_sddo14 */ + <4 RK_PA4 2 &pcfg_pull_none>, + /* ebc_sddo15 */ + <4 RK_PA5 2 &pcfg_pull_none>, + /* ebc_sdle */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* ebc_sdoe */ + <4 RK_PB7 2 &pcfg_pull_none>; + }; + }; + + edpdp { + /omit-if-no-ref/ + edpdpm0_pins: edpdpm0-pins { + rockchip,pins = + /* edpdp_hpdinm0 */ + <4 RK_PC4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + edpdpm1_pins: edpdpm1-pins { + rockchip,pins = + /* edpdp_hpdinm1 */ + <0 RK_PC2 2 &pcfg_pull_none>; + }; + }; + + emmc { + /omit-if-no-ref/ + emmc_rstnout: emmc-rstnout { + rockchip,pins = + /* emmc_rstn */ + <1 RK_PC7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + emmc_bus8: emmc-bus8 { + rockchip,pins = + /* emmc_d0 */ + <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d1 */ + <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d2 */ + <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d3 */ + <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d4 */ + <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d5 */ + <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d6 */ + <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d7 */ + <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_clk: emmc-clk { + rockchip,pins = + /* emmc_clkout */ + <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_cmd: emmc-cmd { + rockchip,pins = + /* emmc_cmd */ + <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_datastrobe: emmc-datastrobe { + rockchip,pins = + /* emmc_datastrobe */ + <1 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + eth0 { + /omit-if-no-ref/ + eth0_pins: eth0-pins { + rockchip,pins = + /* eth0_refclko25m */ + <2 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + eth1 { + /omit-if-no-ref/ + eth1m0_pins: eth1m0-pins { + rockchip,pins = + /* eth1_refclko25mm0 */ + <3 RK_PB0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth1m1_pins: eth1m1-pins { + rockchip,pins = + /* eth1_refclko25mm1 */ + <4 RK_PB3 3 &pcfg_pull_none>; + }; + }; + + flash { + /omit-if-no-ref/ + flash_pins: flash-pins { + rockchip,pins = + /* flash_ale */ + <1 RK_PD0 2 &pcfg_pull_none>, + /* flash_cle */ + <1 RK_PC6 3 &pcfg_pull_none>, + /* flash_cs0n */ + <1 RK_PD3 2 &pcfg_pull_none>, + /* flash_cs1n */ + <1 RK_PD4 2 &pcfg_pull_none>, + /* flash_d0 */ + <1 RK_PB4 2 &pcfg_pull_none>, + /* flash_d1 */ + <1 RK_PB5 2 &pcfg_pull_none>, + /* flash_d2 */ + <1 RK_PB6 2 &pcfg_pull_none>, + /* flash_d3 */ + <1 RK_PB7 2 &pcfg_pull_none>, + /* flash_d4 */ + <1 RK_PC0 2 &pcfg_pull_none>, + /* flash_d5 */ + <1 RK_PC1 2 &pcfg_pull_none>, + /* flash_d6 */ + <1 RK_PC2 2 &pcfg_pull_none>, + /* flash_d7 */ + <1 RK_PC3 2 &pcfg_pull_none>, + /* flash_dqs */ + <1 RK_PC5 2 &pcfg_pull_none>, + /* flash_rdn */ + <1 RK_PD2 2 &pcfg_pull_none>, + /* flash_rdy */ + <1 RK_PD1 2 &pcfg_pull_none>, + /* flash_volsel */ + <0 RK_PA7 1 &pcfg_pull_none>, + /* flash_wpn */ + <1 RK_PC7 3 &pcfg_pull_none>, + /* flash_wrn */ + <1 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + fspi { + /omit-if-no-ref/ + fspi_pins: fspi-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD0 1 &pcfg_pull_none>, + /* fspi_cs0n */ + <1 RK_PD3 1 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PD1 1 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PD2 1 &pcfg_pull_none>, + /* fspi_d2 */ + <1 RK_PC7 2 &pcfg_pull_none>, + /* fspi_d3 */ + <1 RK_PD4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_cs1: fspi-cs1 { + rockchip,pins = + /* fspi_cs1n */ + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + gmac0 { + /omit-if-no-ref/ + gmac0_miim: gmac0-miim { + rockchip,pins = + /* gmac0_mdc */ + <2 RK_PC3 2 &pcfg_pull_none>, + /* gmac0_mdio */ + <2 RK_PC4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_clkinout: gmac0-clkinout { + rockchip,pins = + /* gmac0_mclkinout */ + <2 RK_PC2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rx_er: gmac0-rx-er { + rockchip,pins = + /* gmac0_rxer */ + <2 RK_PC5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rx_bus2: gmac0-rx-bus2 { + rockchip,pins = + /* gmac0_rxd0 */ + <2 RK_PB6 1 &pcfg_pull_none>, + /* gmac0_rxd1 */ + <2 RK_PB7 2 &pcfg_pull_none>, + /* gmac0_rxdvcrs */ + <2 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_tx_bus2: gmac0-tx-bus2 { + rockchip,pins = + /* gmac0_txd0 */ + <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>, + /* gmac0_txd1 */ + <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>, + /* gmac0_txen */ + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rgmii_clk: gmac0-rgmii-clk { + rockchip,pins = + /* gmac0_rxclk */ + <2 RK_PA5 2 &pcfg_pull_none>, + /* gmac0_txclk */ + <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>; + }; + + /omit-if-no-ref/ + gmac0_rgmii_bus: gmac0-rgmii-bus { + rockchip,pins = + /* gmac0_rxd2 */ + <2 RK_PA3 2 &pcfg_pull_none>, + /* gmac0_rxd3 */ + <2 RK_PA4 2 &pcfg_pull_none>, + /* gmac0_txd2 */ + <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>, + /* gmac0_txd3 */ + <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>; + }; + }; + + gmac1 { + /omit-if-no-ref/ + gmac1m0_miim: gmac1m0-miim { + rockchip,pins = + /* gmac1_mdcm0 */ + <3 RK_PC4 3 &pcfg_pull_none>, + /* gmac1_mdiom0 */ + <3 RK_PC5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_clkinout: gmac1m0-clkinout { + rockchip,pins = + /* gmac1_mclkinoutm0 */ + <3 RK_PC0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_rx_er: gmac1m0-rx-er { + rockchip,pins = + /* gmac1_rxerm0 */ + <3 RK_PB4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_rx_bus2: gmac1m0-rx-bus2 { + rockchip,pins = + /* gmac1_rxd0m0 */ + <3 RK_PB1 3 &pcfg_pull_none>, + /* gmac1_rxd1m0 */ + <3 RK_PB2 3 &pcfg_pull_none>, + /* gmac1_rxdvcrsm0 */ + <3 RK_PB3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_tx_bus2: gmac1m0-tx-bus2 { + rockchip,pins = + /* gmac1_txd0m0 */ + <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txd1m0 */ + <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txenm0 */ + <3 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { + rockchip,pins = + /* gmac1_rxclkm0 */ + <3 RK_PA7 3 &pcfg_pull_none>, + /* gmac1_txclkm0 */ + <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>; + }; + + /omit-if-no-ref/ + gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { + rockchip,pins = + /* gmac1_rxd2m0 */ + <3 RK_PA4 3 &pcfg_pull_none>, + /* gmac1_rxd3m0 */ + <3 RK_PA5 3 &pcfg_pull_none>, + /* gmac1_txd2m0 */ + <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txd3m0 */ + <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + gmac1m1_miim: gmac1m1-miim { + rockchip,pins = + /* gmac1_mdcm1 */ + <4 RK_PB6 3 &pcfg_pull_none>, + /* gmac1_mdiom1 */ + <4 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_clkinout: gmac1m1-clkinout { + rockchip,pins = + /* gmac1_mclkinoutm1 */ + <4 RK_PC1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_rx_er: gmac1m1-rx-er { + rockchip,pins = + /* gmac1_rxerm1 */ + <4 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_rx_bus2: gmac1m1-rx-bus2 { + rockchip,pins = + /* gmac1_rxd0m1 */ + <4 RK_PA7 3 &pcfg_pull_none>, + /* gmac1_rxd1m1 */ + <4 RK_PB0 3 &pcfg_pull_none>, + /* gmac1_rxdvcrsm1 */ + <4 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_tx_bus2: gmac1m1-tx-bus2 { + rockchip,pins = + /* gmac1_txd0m1 */ + <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txd1m1 */ + <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txenm1 */ + <4 RK_PA6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_rgmii_clk: gmac1m1-rgmii-clk { + rockchip,pins = + /* gmac1_rxclkm1 */ + <4 RK_PA3 3 &pcfg_pull_none>, + /* gmac1_txclkm1 */ + <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>; + }; + + /omit-if-no-ref/ + gmac1m1_rgmii_bus: gmac1m1-rgmii-bus { + rockchip,pins = + /* gmac1_rxd2m1 */ + <4 RK_PA1 3 &pcfg_pull_none>, + /* gmac1_rxd3m1 */ + <4 RK_PA2 3 &pcfg_pull_none>, + /* gmac1_txd2m1 */ + <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>, + /* gmac1_txd3m1 */ + <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>; + }; + }; + + gpu { + /omit-if-no-ref/ + gpu_pins: gpu-pins { + rockchip,pins = + /* gpu_avs */ + <0 RK_PC0 2 &pcfg_pull_none>, + /* gpu_pwren */ + <0 RK_PA6 4 &pcfg_pull_none>; + }; + }; + + hdmitx { + /omit-if-no-ref/ + hdmitxm0_cec: hdmitxm0-cec { + rockchip,pins = + /* hdmitxm0_cec */ + <4 RK_PD1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmitxm1_cec: hdmitxm1-cec { + rockchip,pins = + /* hdmitxm1_cec */ + <0 RK_PC7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmitx_scl: hdmitx-scl { + rockchip,pins = + /* hdmitx_scl */ + <4 RK_PC7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmitx_sda: hdmitx-sda { + rockchip,pins = + /* hdmitx_sda */ + <4 RK_PD0 1 &pcfg_pull_none>; + }; + }; + + i2c0 { + /omit-if-no-ref/ + i2c0_xfer: i2c0-xfer { + rockchip,pins = + /* i2c0_scl */ + <0 RK_PB1 1 &pcfg_pull_none_smt>, + /* i2c0_sda */ + <0 RK_PB2 1 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + /omit-if-no-ref/ + i2c1_xfer: i2c1-xfer { + rockchip,pins = + /* i2c1_scl */ + <0 RK_PB3 1 &pcfg_pull_none_smt>, + /* i2c1_sda */ + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + /omit-if-no-ref/ + i2c2m0_xfer: i2c2m0-xfer { + rockchip,pins = + /* i2c2_sclm0 */ + <0 RK_PB5 1 &pcfg_pull_none_smt>, + /* i2c2_sdam0 */ + <0 RK_PB6 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = + /* i2c2_sclm1 */ + <4 RK_PB5 1 &pcfg_pull_none_smt>, + /* i2c2_sdam1 */ + <4 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + /omit-if-no-ref/ + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + /* i2c3_sclm0 */ + <1 RK_PA1 1 &pcfg_pull_none_smt>, + /* i2c3_sdam0 */ + <1 RK_PA0 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + /* i2c3_sclm1 */ + <3 RK_PB5 4 &pcfg_pull_none_smt>, + /* i2c3_sdam1 */ + <3 RK_PB6 4 &pcfg_pull_none_smt>; + }; + }; + + i2c4 { + /omit-if-no-ref/ + i2c4m0_xfer: i2c4m0-xfer { + rockchip,pins = + /* i2c4_sclm0 */ + <4 RK_PB3 1 &pcfg_pull_none_smt>, + /* i2c4_sdam0 */ + <4 RK_PB2 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c4m1_xfer: i2c4m1-xfer { + rockchip,pins = + /* i2c4_sclm1 */ + <2 RK_PB2 2 &pcfg_pull_none_smt>, + /* i2c4_sdam1 */ + <2 RK_PB1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c5 { + /omit-if-no-ref/ + i2c5m0_xfer: i2c5m0-xfer { + rockchip,pins = + /* i2c5_sclm0 */ + <3 RK_PB3 4 &pcfg_pull_none_smt>, + /* i2c5_sdam0 */ + <3 RK_PB4 4 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c5m1_xfer: i2c5m1-xfer { + rockchip,pins = + /* i2c5_sclm1 */ + <4 RK_PC7 2 &pcfg_pull_none_smt>, + /* i2c5_sdam1 */ + <4 RK_PD0 2 &pcfg_pull_none_smt>; + }; + }; + + i2s1 { + /omit-if-no-ref/ + i2s1m0_lrckrx: i2s1m0-lrckrx { + rockchip,pins = + /* i2s1m0_lrckrx */ + <1 RK_PA6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_lrcktx: i2s1m0-lrcktx { + rockchip,pins = + /* i2s1m0_lrcktx */ + <1 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_mclk: i2s1m0-mclk { + rockchip,pins = + /* i2s1m0_mclk */ + <1 RK_PA2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sclkrx: i2s1m0-sclkrx { + rockchip,pins = + /* i2s1m0_sclkrx */ + <1 RK_PA4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sclktx: i2s1m0-sclktx { + rockchip,pins = + /* i2s1m0_sclktx */ + <1 RK_PA3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi0: i2s1m0-sdi0 { + rockchip,pins = + /* i2s1m0_sdi0 */ + <1 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi1: i2s1m0-sdi1 { + rockchip,pins = + /* i2s1m0_sdi1 */ + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi2: i2s1m0-sdi2 { + rockchip,pins = + /* i2s1m0_sdi2 */ + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi3: i2s1m0-sdi3 { + rockchip,pins = + /* i2s1m0_sdi3 */ + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo0: i2s1m0-sdo0 { + rockchip,pins = + /* i2s1m0_sdo0 */ + <1 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo1: i2s1m0-sdo1 { + rockchip,pins = + /* i2s1m0_sdo1 */ + <1 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo2: i2s1m0-sdo2 { + rockchip,pins = + /* i2s1m0_sdo2 */ + <1 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo3: i2s1m0-sdo3 { + rockchip,pins = + /* i2s1m0_sdo3 */ + <1 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_lrckrx: i2s1m1-lrckrx { + rockchip,pins = + /* i2s1m1_lrckrx */ + <4 RK_PA7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_lrcktx: i2s1m1-lrcktx { + rockchip,pins = + /* i2s1m1_lrcktx */ + <3 RK_PD0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_mclk: i2s1m1-mclk { + rockchip,pins = + /* i2s1m1_mclk */ + <3 RK_PC6 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sclkrx: i2s1m1-sclkrx { + rockchip,pins = + /* i2s1m1_sclkrx */ + <4 RK_PA6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sclktx: i2s1m1-sclktx { + rockchip,pins = + /* i2s1m1_sclktx */ + <3 RK_PC7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi0: i2s1m1-sdi0 { + rockchip,pins = + /* i2s1m1_sdi0 */ + <3 RK_PD2 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi1: i2s1m1-sdi1 { + rockchip,pins = + /* i2s1m1_sdi1 */ + <3 RK_PD3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi2: i2s1m1-sdi2 { + rockchip,pins = + /* i2s1m1_sdi2 */ + <3 RK_PD4 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi3: i2s1m1-sdi3 { + rockchip,pins = + /* i2s1m1_sdi3 */ + <3 RK_PD5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo0: i2s1m1-sdo0 { + rockchip,pins = + /* i2s1m1_sdo0 */ + <3 RK_PD1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo1: i2s1m1-sdo1 { + rockchip,pins = + /* i2s1m1_sdo1 */ + <4 RK_PB0 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo2: i2s1m1-sdo2 { + rockchip,pins = + /* i2s1m1_sdo2 */ + <4 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo3: i2s1m1-sdo3 { + rockchip,pins = + /* i2s1m1_sdo3 */ + <4 RK_PB5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_lrckrx: i2s1m2-lrckrx { + rockchip,pins = + /* i2s1m2_lrckrx */ + <3 RK_PC5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_lrcktx: i2s1m2-lrcktx { + rockchip,pins = + /* i2s1m2_lrcktx */ + <2 RK_PD2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_mclk: i2s1m2-mclk { + rockchip,pins = + /* i2s1m2_mclk */ + <2 RK_PD0 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sclkrx: i2s1m2-sclkrx { + rockchip,pins = + /* i2s1m2_sclkrx */ + <3 RK_PC3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sclktx: i2s1m2-sclktx { + rockchip,pins = + /* i2s1m2_sclktx */ + <2 RK_PD1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdi0: i2s1m2-sdi0 { + rockchip,pins = + /* i2s1m2_sdi0 */ + <2 RK_PD3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdi1: i2s1m2-sdi1 { + rockchip,pins = + /* i2s1m2_sdi1 */ + <2 RK_PD4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdi2: i2s1m2-sdi2 { + rockchip,pins = + /* i2s1m2_sdi2 */ + <2 RK_PD5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdi3: i2s1m2-sdi3 { + rockchip,pins = + /* i2s1m2_sdi3 */ + <2 RK_PD6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdo0: i2s1m2-sdo0 { + rockchip,pins = + /* i2s1m2_sdo0 */ + <2 RK_PD7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdo1: i2s1m2-sdo1 { + rockchip,pins = + /* i2s1m2_sdo1 */ + <3 RK_PA0 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdo2: i2s1m2-sdo2 { + rockchip,pins = + /* i2s1m2_sdo2 */ + <3 RK_PC1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m2_sdo3: i2s1m2-sdo3 { + rockchip,pins = + /* i2s1m2_sdo3 */ + <3 RK_PC2 5 &pcfg_pull_none>; + }; + }; + + i2s2 { + /omit-if-no-ref/ + i2s2m0_lrckrx: i2s2m0-lrckrx { + rockchip,pins = + /* i2s2m0_lrckrx */ + <2 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_lrcktx: i2s2m0-lrcktx { + rockchip,pins = + /* i2s2m0_lrcktx */ + <2 RK_PC3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_mclk: i2s2m0-mclk { + rockchip,pins = + /* i2s2m0_mclk */ + <2 RK_PC1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sclkrx: i2s2m0-sclkrx { + rockchip,pins = + /* i2s2m0_sclkrx */ + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sclktx: i2s2m0-sclktx { + rockchip,pins = + /* i2s2m0_sclktx */ + <2 RK_PC2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdi: i2s2m0-sdi { + rockchip,pins = + /* i2s2m0_sdi */ + <2 RK_PC5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdo: i2s2m0-sdo { + rockchip,pins = + /* i2s2m0_sdo */ + <2 RK_PC4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_lrckrx: i2s2m1-lrckrx { + rockchip,pins = + /* i2s2m1_lrckrx */ + <4 RK_PA5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_lrcktx: i2s2m1-lrcktx { + rockchip,pins = + /* i2s2m1_lrcktx */ + <4 RK_PA4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_mclk: i2s2m1-mclk { + rockchip,pins = + /* i2s2m1_mclk */ + <4 RK_PB6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sclkrx: i2s2m1-sclkrx { + rockchip,pins = + /* i2s2m1_sclkrx */ + <4 RK_PC1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sclktx: i2s2m1-sclktx { + rockchip,pins = + /* i2s2m1_sclktx */ + <4 RK_PB7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sdi: i2s2m1-sdi { + rockchip,pins = + /* i2s2m1_sdi */ + <4 RK_PB2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sdo: i2s2m1-sdo { + rockchip,pins = + /* i2s2m1_sdo */ + <4 RK_PB3 5 &pcfg_pull_none>; + }; + }; + + i2s3 { + /omit-if-no-ref/ + i2s3m0_lrck: i2s3m0-lrck { + rockchip,pins = + /* i2s3m0_lrck */ + <3 RK_PA4 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m0_mclk: i2s3m0-mclk { + rockchip,pins = + /* i2s3m0_mclk */ + <3 RK_PA2 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m0_sclk: i2s3m0-sclk { + rockchip,pins = + /* i2s3m0_sclk */ + <3 RK_PA3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m0_sdi: i2s3m0-sdi { + rockchip,pins = + /* i2s3m0_sdi */ + <3 RK_PA6 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m0_sdo: i2s3m0-sdo { + rockchip,pins = + /* i2s3m0_sdo */ + <3 RK_PA5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m1_lrck: i2s3m1-lrck { + rockchip,pins = + /* i2s3m1_lrck */ + <4 RK_PC4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m1_mclk: i2s3m1-mclk { + rockchip,pins = + /* i2s3m1_mclk */ + <4 RK_PC2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m1_sclk: i2s3m1-sclk { + rockchip,pins = + /* i2s3m1_sclk */ + <4 RK_PC3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m1_sdi: i2s3m1-sdi { + rockchip,pins = + /* i2s3m1_sdi */ + <4 RK_PC6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3m1_sdo: i2s3m1-sdo { + rockchip,pins = + /* i2s3m1_sdo */ + <4 RK_PC5 5 &pcfg_pull_none>; + }; + }; + + isp { + /omit-if-no-ref/ + isp_pins: isp-pins { + rockchip,pins = + /* isp_flashtrigin */ + <4 RK_PB4 4 &pcfg_pull_none>, + /* isp_flashtrigout */ + <4 RK_PA6 1 &pcfg_pull_none>, + /* isp_prelighttrig */ + <4 RK_PB1 1 &pcfg_pull_none>; + }; + }; + + jtag { + /omit-if-no-ref/ + jtag_pins: jtag-pins { + rockchip,pins = + /* jtag_tck */ + <1 RK_PD7 2 &pcfg_pull_none>, + /* jtag_tms */ + <2 RK_PA0 2 &pcfg_pull_none>; + }; + }; + + lcdc { + /omit-if-no-ref/ + lcdc_ctl: lcdc-ctl { + rockchip,pins = + /* lcdc_clk */ + <3 RK_PA0 1 &pcfg_pull_none>, + /* lcdc_d0 */ + <2 RK_PD0 1 &pcfg_pull_none>, + /* lcdc_d1 */ + <2 RK_PD1 1 &pcfg_pull_none>, + /* lcdc_d2 */ + <2 RK_PD2 1 &pcfg_pull_none>, + /* lcdc_d3 */ + <2 RK_PD3 1 &pcfg_pull_none>, + /* lcdc_d4 */ + <2 RK_PD4 1 &pcfg_pull_none>, + /* lcdc_d5 */ + <2 RK_PD5 1 &pcfg_pull_none>, + /* lcdc_d6 */ + <2 RK_PD6 1 &pcfg_pull_none>, + /* lcdc_d7 */ + <2 RK_PD7 1 &pcfg_pull_none>, + /* lcdc_d8 */ + <3 RK_PA1 1 &pcfg_pull_none>, + /* lcdc_d9 */ + <3 RK_PA2 1 &pcfg_pull_none>, + /* lcdc_d10 */ + <3 RK_PA3 1 &pcfg_pull_none>, + /* lcdc_d11 */ + <3 RK_PA4 1 &pcfg_pull_none>, + /* lcdc_d12 */ + <3 RK_PA5 1 &pcfg_pull_none>, + /* lcdc_d13 */ + <3 RK_PA6 1 &pcfg_pull_none>, + /* lcdc_d14 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* lcdc_d15 */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* lcdc_d16 */ + <3 RK_PB1 1 &pcfg_pull_none>, + /* lcdc_d17 */ + <3 RK_PB2 1 &pcfg_pull_none>, + /* lcdc_d18 */ + <3 RK_PB3 1 &pcfg_pull_none>, + /* lcdc_d19 */ + <3 RK_PB4 1 &pcfg_pull_none>, + /* lcdc_d20 */ + <3 RK_PB5 1 &pcfg_pull_none>, + /* lcdc_d21 */ + <3 RK_PB6 1 &pcfg_pull_none>, + /* lcdc_d22 */ + <3 RK_PB7 1 &pcfg_pull_none>, + /* lcdc_d23 */ + <3 RK_PC0 1 &pcfg_pull_none>, + /* lcdc_den */ + <3 RK_PC3 1 &pcfg_pull_none>, + /* lcdc_hsync */ + <3 RK_PC1 1 &pcfg_pull_none>, + /* lcdc_vsync */ + <3 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + mcu { + /omit-if-no-ref/ + mcu_pins: mcu-pins { + rockchip,pins = + /* mcu_jtagtck */ + <0 RK_PB4 4 &pcfg_pull_none>, + /* mcu_jtagtdi */ + <0 RK_PC1 4 &pcfg_pull_none>, + /* mcu_jtagtdo */ + <0 RK_PB3 4 &pcfg_pull_none>, + /* mcu_jtagtms */ + <0 RK_PC2 4 &pcfg_pull_none>, + /* mcu_jtagtrstn */ + <0 RK_PC3 4 &pcfg_pull_none>; + }; + }; + + npu { + /omit-if-no-ref/ + npu_pins: npu-pins { + rockchip,pins = + /* npu_avs */ + <0 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + pcie20 { + /omit-if-no-ref/ + pcie20m0_pins: pcie20m0-pins { + rockchip,pins = + /* pcie20_clkreqnm0 */ + <0 RK_PA5 3 &pcfg_pull_none>, + /* pcie20_perstnm0 */ + <0 RK_PB6 3 &pcfg_pull_none>, + /* pcie20_wakenm0 */ + <0 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie20m1_pins: pcie20m1-pins { + rockchip,pins = + /* pcie20_clkreqnm1 */ + <2 RK_PD0 4 &pcfg_pull_none>, + /* pcie20_perstnm1 */ + <3 RK_PC1 4 &pcfg_pull_none>, + /* pcie20_wakenm1 */ + <2 RK_PD1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie20m2_pins: pcie20m2-pins { + rockchip,pins = + /* pcie20_clkreqnm2 */ + <1 RK_PB0 4 &pcfg_pull_none>, + /* pcie20_perstnm2 */ + <1 RK_PB2 4 &pcfg_pull_none>, + /* pcie20_wakenm2 */ + <1 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie20_buttonrstn: pcie20-buttonrstn { + rockchip,pins = + /* pcie20_buttonrstn */ + <0 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + pcie30x1 { + /omit-if-no-ref/ + pcie30x1m0_pins: pcie30x1m0-pins { + rockchip,pins = + /* pcie30x1_clkreqnm0 */ + <0 RK_PA4 3 &pcfg_pull_none>, + /* pcie30x1_perstnm0 */ + <0 RK_PC3 3 &pcfg_pull_none>, + /* pcie30x1_wakenm0 */ + <0 RK_PC2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1m1_pins: pcie30x1m1-pins { + rockchip,pins = + /* pcie30x1_clkreqnm1 */ + <2 RK_PD2 4 &pcfg_pull_none>, + /* pcie30x1_perstnm1 */ + <3 RK_PA1 4 &pcfg_pull_none>, + /* pcie30x1_wakenm1 */ + <2 RK_PD3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1m2_pins: pcie30x1m2-pins { + rockchip,pins = + /* pcie30x1_clkreqnm2 */ + <1 RK_PA5 4 &pcfg_pull_none>, + /* pcie30x1_perstnm2 */ + <1 RK_PA2 4 &pcfg_pull_none>, + /* pcie30x1_wakenm2 */ + <1 RK_PA3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1_buttonrstn: pcie30x1-buttonrstn { + rockchip,pins = + /* pcie30x1_buttonrstn */ + <0 RK_PB3 3 &pcfg_pull_none>; + }; + }; + + pcie30x2 { + /omit-if-no-ref/ + pcie30x2m0_pins: pcie30x2m0-pins { + rockchip,pins = + /* pcie30x2_clkreqnm0 */ + <0 RK_PA6 2 &pcfg_pull_none>, + /* pcie30x2_perstnm0 */ + <0 RK_PC6 3 &pcfg_pull_none>, + /* pcie30x2_wakenm0 */ + <0 RK_PC5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2m1_pins: pcie30x2m1-pins { + rockchip,pins = + /* pcie30x2_clkreqnm1 */ + <2 RK_PD4 4 &pcfg_pull_none>, + /* pcie30x2_perstnm1 */ + <2 RK_PD6 4 &pcfg_pull_none>, + /* pcie30x2_wakenm1 */ + <2 RK_PD5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2m2_pins: pcie30x2m2-pins { + rockchip,pins = + /* pcie30x2_clkreqnm2 */ + <4 RK_PC2 4 &pcfg_pull_none>, + /* pcie30x2_perstnm2 */ + <4 RK_PC4 4 &pcfg_pull_none>, + /* pcie30x2_wakenm2 */ + <4 RK_PC3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2_buttonrstn: pcie30x2-buttonrstn { + rockchip,pins = + /* pcie30x2_buttonrstn */ + <0 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm { + /omit-if-no-ref/ + pdmm0_clk: pdmm0-clk { + rockchip,pins = + /* pdm_clk0m0 */ + <1 RK_PA6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm0_clk1: pdmm0-clk1 { + rockchip,pins = + /* pdmm0_clk1 */ + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm0_sdi0: pdmm0-sdi0 { + rockchip,pins = + /* pdmm0_sdi0 */ + <1 RK_PB3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm0_sdi1: pdmm0-sdi1 { + rockchip,pins = + /* pdmm0_sdi1 */ + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm0_sdi2: pdmm0-sdi2 { + rockchip,pins = + /* pdmm0_sdi2 */ + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm0_sdi3: pdmm0-sdi3 { + rockchip,pins = + /* pdmm0_sdi3 */ + <1 RK_PB0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_clk: pdmm1-clk { + rockchip,pins = + /* pdm_clk0m1 */ + <3 RK_PD6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_clk1: pdmm1-clk1 { + rockchip,pins = + /* pdmm1_clk1 */ + <4 RK_PA0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_sdi0: pdmm1-sdi0 { + rockchip,pins = + /* pdmm1_sdi0 */ + <3 RK_PD7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_sdi1: pdmm1-sdi1 { + rockchip,pins = + /* pdmm1_sdi1 */ + <4 RK_PA1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_sdi2: pdmm1-sdi2 { + rockchip,pins = + /* pdmm1_sdi2 */ + <4 RK_PA2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm1_sdi3: pdmm1-sdi3 { + rockchip,pins = + /* pdmm1_sdi3 */ + <4 RK_PA3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm2_clk1: pdmm2-clk1 { + rockchip,pins = + /* pdmm2_clk1 */ + <3 RK_PC4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm2_sdi0: pdmm2-sdi0 { + rockchip,pins = + /* pdmm2_sdi0 */ + <3 RK_PB3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm2_sdi1: pdmm2-sdi1 { + rockchip,pins = + /* pdmm2_sdi1 */ + <3 RK_PB4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm2_sdi2: pdmm2-sdi2 { + rockchip,pins = + /* pdmm2_sdi2 */ + <3 RK_PB7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdmm2_sdi3: pdmm2-sdi3 { + rockchip,pins = + /* pdmm2_sdi3 */ + <3 RK_PC0 5 &pcfg_pull_none>; + }; + }; + + pmic { + /omit-if-no-ref/ + pmic_pins: pmic-pins { + rockchip,pins = + /* pmic_sleep */ + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + + pmu { + /omit-if-no-ref/ + pmu_pins: pmu-pins { + rockchip,pins = + /* pmu_debug0 */ + <0 RK_PA5 4 &pcfg_pull_none>, + /* pmu_debug1 */ + <0 RK_PA6 3 &pcfg_pull_none>, + /* pmu_debug2 */ + <0 RK_PC4 4 &pcfg_pull_none>, + /* pmu_debug3 */ + <0 RK_PC5 4 &pcfg_pull_none>, + /* pmu_debug4 */ + <0 RK_PC6 4 &pcfg_pull_none>, + /* pmu_debug5 */ + <0 RK_PC7 4 &pcfg_pull_none>; + }; + }; + + pwm0 { + /omit-if-no-ref/ + pwm0m0_pins: pwm0m0-pins { + rockchip,pins = + /* pwm0_m0 */ + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm0m1_pins: pwm0m1-pins { + rockchip,pins = + /* pwm0_m1 */ + <0 RK_PC7 2 &pcfg_pull_none>; + }; + }; + + pwm1 { + /omit-if-no-ref/ + pwm1m0_pins: pwm1m0-pins { + rockchip,pins = + /* pwm1_m0 */ + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm1m1_pins: pwm1m1-pins { + rockchip,pins = + /* pwm1_m1 */ + <0 RK_PB5 4 &pcfg_pull_none>; + }; + }; + + pwm2 { + /omit-if-no-ref/ + pwm2m0_pins: pwm2m0-pins { + rockchip,pins = + /* pwm2_m0 */ + <0 RK_PC1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm2m1_pins: pwm2m1-pins { + rockchip,pins = + /* pwm2_m1 */ + <0 RK_PB6 4 &pcfg_pull_none>; + }; + }; + + pwm3 { + /omit-if-no-ref/ + pwm3_pins: pwm3-pins { + rockchip,pins = + /* pwm3_ir */ + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + pwm4 { + /omit-if-no-ref/ + pwm4_pins: pwm4-pins { + rockchip,pins = + /* pwm4 */ + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + pwm5 { + /omit-if-no-ref/ + pwm5_pins: pwm5-pins { + rockchip,pins = + /* pwm5 */ + <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + pwm6 { + /omit-if-no-ref/ + pwm6_pins: pwm6-pins { + rockchip,pins = + /* pwm6 */ + <0 RK_PC5 1 &pcfg_pull_none>; + }; + }; + + pwm7 { + /omit-if-no-ref/ + pwm7_pins: pwm7-pins { + rockchip,pins = + /* pwm7_ir */ + <0 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + pwm8 { + /omit-if-no-ref/ + pwm8m0_pins: pwm8m0-pins { + rockchip,pins = + /* pwm8_m0 */ + <3 RK_PB1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm8m1_pins: pwm8m1-pins { + rockchip,pins = + /* pwm8_m1 */ + <1 RK_PD5 4 &pcfg_pull_none>; + }; + }; + + pwm9 { + /omit-if-no-ref/ + pwm9m0_pins: pwm9m0-pins { + rockchip,pins = + /* pwm9_m0 */ + <3 RK_PB2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm9m1_pins: pwm9m1-pins { + rockchip,pins = + /* pwm9_m1 */ + <1 RK_PD6 4 &pcfg_pull_none>; + }; + }; + + pwm10 { + /omit-if-no-ref/ + pwm10m0_pins: pwm10m0-pins { + rockchip,pins = + /* pwm10_m0 */ + <3 RK_PB5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm10m1_pins: pwm10m1-pins { + rockchip,pins = + /* pwm10_m1 */ + <2 RK_PA1 2 &pcfg_pull_none>; + }; + }; + + pwm11 { + /omit-if-no-ref/ + pwm11m0_pins: pwm11m0-pins { + rockchip,pins = + /* pwm11_irm0 */ + <3 RK_PB6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm11m1_pins: pwm11m1-pins { + rockchip,pins = + /* pwm11_irm1 */ + <4 RK_PC0 3 &pcfg_pull_none>; + }; + }; + + pwm12 { + /omit-if-no-ref/ + pwm12m0_pins: pwm12m0-pins { + rockchip,pins = + /* pwm12_m0 */ + <3 RK_PB7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm12m1_pins: pwm12m1-pins { + rockchip,pins = + /* pwm12_m1 */ + <4 RK_PC5 1 &pcfg_pull_none>; + }; + }; + + pwm13 { + /omit-if-no-ref/ + pwm13m0_pins: pwm13m0-pins { + rockchip,pins = + /* pwm13_m0 */ + <3 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm13m1_pins: pwm13m1-pins { + rockchip,pins = + /* pwm13_m1 */ + <4 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + pwm14 { + /omit-if-no-ref/ + pwm14m0_pins: pwm14m0-pins { + rockchip,pins = + /* pwm14_m0 */ + <3 RK_PC4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm14m1_pins: pwm14m1-pins { + rockchip,pins = + /* pwm14_m1 */ + <4 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + pwm15 { + /omit-if-no-ref/ + pwm15m0_pins: pwm15m0-pins { + rockchip,pins = + /* pwm15_irm0 */ + <3 RK_PC5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm15m1_pins: pwm15m1-pins { + rockchip,pins = + /* pwm15_irm1 */ + <4 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + refclk { + /omit-if-no-ref/ + refclk_pins: refclk-pins { + rockchip,pins = + /* refclk_ou */ + <0 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + sata { + /omit-if-no-ref/ + sata_pins: sata-pins { + rockchip,pins = + /* sata_cpdet */ + <0 RK_PA4 2 &pcfg_pull_none>, + /* sata_cppod */ + <0 RK_PA6 1 &pcfg_pull_none>, + /* sata_mpswitch */ + <0 RK_PA5 2 &pcfg_pull_none>; + }; + }; + + sata0 { + /omit-if-no-ref/ + sata0_pins: sata0-pins { + rockchip,pins = + /* sata0_actled */ + <4 RK_PC6 3 &pcfg_pull_none>; + }; + }; + + sata1 { + /omit-if-no-ref/ + sata1_pins: sata1-pins { + rockchip,pins = + /* sata1_actled */ + <4 RK_PC5 3 &pcfg_pull_none>; + }; + }; + + sata2 { + /omit-if-no-ref/ + sata2_pins: sata2-pins { + rockchip,pins = + /* sata2_actled */ + <4 RK_PC4 3 &pcfg_pull_none>; + }; + }; + + scr { + /omit-if-no-ref/ + scr_pins: scr-pins { + rockchip,pins = + /* scr_clk */ + <1 RK_PA2 3 &pcfg_pull_none>, + /* scr_det */ + <1 RK_PA7 3 &pcfg_pull_up>, + /* scr_io */ + <1 RK_PA3 3 &pcfg_pull_up>, + /* scr_rst */ + <1 RK_PA5 3 &pcfg_pull_none>; + }; + }; + + sdmmc0 { + /omit-if-no-ref/ + sdmmc0_bus4: sdmmc0-bus4 { + rockchip,pins = + /* sdmmc0_d0 */ + <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc0_d1 */ + <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc0_d2 */ + <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc0_d3 */ + <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc0_clk: sdmmc0-clk { + rockchip,pins = + /* sdmmc0_clk */ + <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc0_cmd: sdmmc0-cmd { + rockchip,pins = + /* sdmmc0_cmd */ + <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc0_det: sdmmc0-det { + rockchip,pins = + /* sdmmc0_det */ + <0 RK_PA4 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc0_pwren: sdmmc0-pwren { + rockchip,pins = + /* sdmmc0_pwren */ + <0 RK_PA5 1 &pcfg_pull_none>; + }; + }; + + sdmmc1 { + /omit-if-no-ref/ + sdmmc1_bus4: sdmmc1-bus4 { + rockchip,pins = + /* sdmmc1_d0 */ + <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc1_d1 */ + <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc1_d2 */ + <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc1_d3 */ + <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc1_clk: sdmmc1-clk { + rockchip,pins = + /* sdmmc1_clk */ + <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc1_cmd: sdmmc1-cmd { + rockchip,pins = + /* sdmmc1_cmd */ + <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc1_det: sdmmc1-det { + rockchip,pins = + /* sdmmc1_det */ + <2 RK_PB2 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc1_pwren: sdmmc1-pwren { + rockchip,pins = + /* sdmmc1_pwren */ + <2 RK_PB1 1 &pcfg_pull_none>; + }; + }; + + sdmmc2 { + /omit-if-no-ref/ + sdmmc2m0_bus4: sdmmc2m0-bus4 { + rockchip,pins = + /* sdmmc2_d0m0 */ + <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d1m0 */ + <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d2m0 */ + <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d3m0 */ + <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m0_clk: sdmmc2m0-clk { + rockchip,pins = + /* sdmmc2_clkm0 */ + <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m0_cmd: sdmmc2m0-cmd { + rockchip,pins = + /* sdmmc2_cmdm0 */ + <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m0_det: sdmmc2m0-det { + rockchip,pins = + /* sdmmc2_detm0 */ + <3 RK_PD4 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc2m0_pwren: sdmmc2m0-pwren { + rockchip,pins = + /* sdmmc2m0_pwren */ + <3 RK_PD5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sdmmc2m1_bus4: sdmmc2m1-bus4 { + rockchip,pins = + /* sdmmc2_d0m1 */ + <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d1m1 */ + <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d2m1 */ + <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>, + /* sdmmc2_d3m1 */ + <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m1_clk: sdmmc2m1-clk { + rockchip,pins = + /* sdmmc2_clkm1 */ + <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m1_cmd: sdmmc2m1-cmd { + rockchip,pins = + /* sdmmc2_cmdm1 */ + <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc2m1_det: sdmmc2m1-det { + rockchip,pins = + /* sdmmc2_detm1 */ + <3 RK_PA7 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc2m1_pwren: sdmmc2m1-pwren { + rockchip,pins = + /* sdmmc2m1_pwren */ + <3 RK_PB0 4 &pcfg_pull_none>; + }; + }; + + spdif { + /omit-if-no-ref/ + spdifm0_tx: spdifm0-tx { + rockchip,pins = + /* spdifm0_tx */ + <1 RK_PA4 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdifm1_tx: spdifm1-tx { + rockchip,pins = + /* spdifm1_tx */ + <3 RK_PC5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdifm2_tx: spdifm2-tx { + rockchip,pins = + /* spdifm2_tx */ + <4 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + spi0 { + /omit-if-no-ref/ + spi0m0_pins: spi0m0-pins { + rockchip,pins = + /* spi0_clkm0 */ + <0 RK_PB5 2 &pcfg_pull_none>, + /* spi0_misom0 */ + <0 RK_PC5 2 &pcfg_pull_none>, + /* spi0_mosim0 */ + <0 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi0m0_cs0: spi0m0-cs0 { + rockchip,pins = + /* spi0_cs0m0 */ + <0 RK_PC6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi0m0_cs1: spi0m0-cs1 { + rockchip,pins = + /* spi0_cs1m0 */ + <0 RK_PC4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi0m1_pins: spi0m1-pins { + rockchip,pins = + /* spi0_clkm1 */ + <2 RK_PD3 3 &pcfg_pull_none>, + /* spi0_misom1 */ + <2 RK_PD0 3 &pcfg_pull_none>, + /* spi0_mosim1 */ + <2 RK_PD1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi0m1_cs0: spi0m1-cs0 { + rockchip,pins = + /* spi0_cs0m1 */ + <2 RK_PD2 3 &pcfg_pull_none>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1m0_pins: spi1m0-pins { + rockchip,pins = + /* spi1_clkm0 */ + <2 RK_PB5 3 &pcfg_pull_none>, + /* spi1_misom0 */ + <2 RK_PB6 3 &pcfg_pull_none>, + /* spi1_mosim0 */ + <2 RK_PB7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi1m0_cs0: spi1m0-cs0 { + rockchip,pins = + /* spi1_cs0m0 */ + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi1m0_cs1: spi1m0-cs1 { + rockchip,pins = + /* spi1_cs1m0 */ + <2 RK_PC6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi1m1_pins: spi1m1-pins { + rockchip,pins = + /* spi1_clkm1 */ + <3 RK_PC3 3 &pcfg_pull_none>, + /* spi1_misom1 */ + <3 RK_PC2 3 &pcfg_pull_none>, + /* spi1_mosim1 */ + <3 RK_PC1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi1m1_cs0: spi1m1-cs0 { + rockchip,pins = + /* spi1_cs0m1 */ + <3 RK_PA1 3 &pcfg_pull_none>; + }; + }; + + spi2 { + /omit-if-no-ref/ + spi2m0_pins: spi2m0-pins { + rockchip,pins = + /* spi2_clkm0 */ + <2 RK_PC1 4 &pcfg_pull_none>, + /* spi2_misom0 */ + <2 RK_PC2 4 &pcfg_pull_none>, + /* spi2_mosim0 */ + <2 RK_PC3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2m0_cs0: spi2m0-cs0 { + rockchip,pins = + /* spi2_cs0m0 */ + <2 RK_PC4 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2m0_cs1: spi2m0-cs1 { + rockchip,pins = + /* spi2_cs1m0 */ + <2 RK_PC5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2m1_pins: spi2m1-pins { + rockchip,pins = + /* spi2_clkm1 */ + <3 RK_PA0 3 &pcfg_pull_none>, + /* spi2_misom1 */ + <2 RK_PD7 3 &pcfg_pull_none>, + /* spi2_mosim1 */ + <2 RK_PD6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2m1_cs0: spi2m1-cs0 { + rockchip,pins = + /* spi2_cs0m1 */ + <2 RK_PD5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2m1_cs1: spi2m1-cs1 { + rockchip,pins = + /* spi2_cs1m1 */ + <2 RK_PD4 3 &pcfg_pull_none>; + }; + }; + + spi3 { + /omit-if-no-ref/ + spi3m0_pins: spi3m0-pins { + rockchip,pins = + /* spi3_clkm0 */ + <4 RK_PB3 4 &pcfg_pull_none>, + /* spi3_misom0 */ + <4 RK_PB0 4 &pcfg_pull_none>, + /* spi3_mosim0 */ + <4 RK_PB2 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi3m0_cs0: spi3m0-cs0 { + rockchip,pins = + /* spi3_cs0m0 */ + <4 RK_PA6 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi3m0_cs1: spi3m0-cs1 { + rockchip,pins = + /* spi3_cs1m0 */ + <4 RK_PA7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi3m1_pins: spi3m1-pins { + rockchip,pins = + /* spi3_clkm1 */ + <4 RK_PC2 2 &pcfg_pull_none>, + /* spi3_misom1 */ + <4 RK_PC5 2 &pcfg_pull_none>, + /* spi3_mosim1 */ + <4 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi3m1_cs0: spi3m1-cs0 { + rockchip,pins = + /* spi3_cs0m1 */ + <4 RK_PC6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi3m1_cs1: spi3m1-cs1 { + rockchip,pins = + /* spi3_cs1m1 */ + <4 RK_PD1 2 &pcfg_pull_none>; + }; + }; + + tsadc { + /omit-if-no-ref/ + tsadcm0_shut: tsadcm0-shut { + rockchip,pins = + /* tsadcm0_shut */ + <0 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + tsadcm1_shut: tsadcm1-shut { + rockchip,pins = + /* tsadcm1_shut */ + <0 RK_PA2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + tsadc_shutorg: tsadc-shutorg { + rockchip,pins = + /* tsadc_shutorg */ + <0 RK_PA1 2 &pcfg_pull_none>; + }; + }; + + uart0 { + /omit-if-no-ref/ + uart0_xfer: uart0-xfer { + rockchip,pins = + /* uart0_rx */ + <0 RK_PC0 3 &pcfg_pull_up>, + /* uart0_tx */ + <0 RK_PC1 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart0_ctsn: uart0-ctsn { + rockchip,pins = + /* uart0_ctsn */ + <0 RK_PC7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart0_rtsn: uart0-rtsn { + rockchip,pins = + /* uart0_rtsn */ + <0 RK_PC4 3 &pcfg_pull_none>; + }; + }; + + uart1 { + /omit-if-no-ref/ + uart1m0_xfer: uart1m0-xfer { + rockchip,pins = + /* uart1_rxm0 */ + <2 RK_PB3 2 &pcfg_pull_up>, + /* uart1_txm0 */ + <2 RK_PB4 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m0_ctsn: uart1m0-ctsn { + rockchip,pins = + /* uart1m0_ctsn */ + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m0_rtsn: uart1m0-rtsn { + rockchip,pins = + /* uart1m0_rtsn */ + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m1_xfer: uart1m1-xfer { + rockchip,pins = + /* uart1_rxm1 */ + <3 RK_PD7 4 &pcfg_pull_up>, + /* uart1_txm1 */ + <3 RK_PD6 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m1_ctsn: uart1m1-ctsn { + rockchip,pins = + /* uart1m1_ctsn */ + <4 RK_PC1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m1_rtsn: uart1m1-rtsn { + rockchip,pins = + /* uart1m1_rtsn */ + <4 RK_PB6 4 &pcfg_pull_none>; + }; + }; + + uart2 { + /omit-if-no-ref/ + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + /* uart2_rxm0 */ + <0 RK_PD0 1 &pcfg_pull_up>, + /* uart2_txm0 */ + <0 RK_PD1 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + /* uart2_rxm1 */ + <1 RK_PD6 2 &pcfg_pull_up>, + /* uart2_txm1 */ + <1 RK_PD5 2 &pcfg_pull_up>; + }; + }; + + uart3 { + /omit-if-no-ref/ + uart3m0_xfer: uart3m0-xfer { + rockchip,pins = + /* uart3_rxm0 */ + <1 RK_PA0 2 &pcfg_pull_up>, + /* uart3_txm0 */ + <1 RK_PA1 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3m0_ctsn: uart3m0-ctsn { + rockchip,pins = + /* uart3m0_ctsn */ + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart3m0_rtsn: uart3m0-rtsn { + rockchip,pins = + /* uart3m0_rtsn */ + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + /* uart3_rxm1 */ + <3 RK_PC0 4 &pcfg_pull_up>, + /* uart3_txm1 */ + <3 RK_PB7 4 &pcfg_pull_up>; + }; + }; + + uart4 { + /omit-if-no-ref/ + uart4m0_xfer: uart4m0-xfer { + rockchip,pins = + /* uart4_rxm0 */ + <1 RK_PA4 2 &pcfg_pull_up>, + /* uart4_txm0 */ + <1 RK_PA6 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart4m0_ctsn: uart4m0-ctsn { + rockchip,pins = + /* uart4m0_ctsn */ + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart4m0_rtsn: uart4m0-rtsn { + rockchip,pins = + /* uart4m0_rtsn */ + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart4m1_xfer: uart4m1-xfer { + rockchip,pins = + /* uart4_rxm1 */ + <3 RK_PB1 4 &pcfg_pull_up>, + /* uart4_txm1 */ + <3 RK_PB2 4 &pcfg_pull_up>; + }; + }; + + uart5 { + /omit-if-no-ref/ + uart5m0_xfer: uart5m0-xfer { + rockchip,pins = + /* uart5_rxm0 */ + <2 RK_PA1 3 &pcfg_pull_up>, + /* uart5_txm0 */ + <2 RK_PA2 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m0_ctsn: uart5m0-ctsn { + rockchip,pins = + /* uart5m0_ctsn */ + <1 RK_PD7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_rtsn: uart5m0-rtsn { + rockchip,pins = + /* uart5m0_rtsn */ + <2 RK_PA0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_xfer: uart5m1-xfer { + rockchip,pins = + /* uart5_rxm1 */ + <3 RK_PC3 4 &pcfg_pull_up>, + /* uart5_txm1 */ + <3 RK_PC2 4 &pcfg_pull_up>; + }; + }; + + uart6 { + /omit-if-no-ref/ + uart6m0_xfer: uart6m0-xfer { + rockchip,pins = + /* uart6_rxm0 */ + <2 RK_PA3 3 &pcfg_pull_up>, + /* uart6_txm0 */ + <2 RK_PA4 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart6m0_ctsn: uart6m0-ctsn { + rockchip,pins = + /* uart6m0_ctsn */ + <2 RK_PC0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart6m0_rtsn: uart6m0-rtsn { + rockchip,pins = + /* uart6m0_rtsn */ + <2 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart6m1_xfer: uart6m1-xfer { + rockchip,pins = + /* uart6_rxm1 */ + <1 RK_PD6 3 &pcfg_pull_up>, + /* uart6_txm1 */ + <1 RK_PD5 3 &pcfg_pull_up>; + }; + }; + + uart7 { + /omit-if-no-ref/ + uart7m0_xfer: uart7m0-xfer { + rockchip,pins = + /* uart7_rxm0 */ + <2 RK_PA5 3 &pcfg_pull_up>, + /* uart7_txm0 */ + <2 RK_PA6 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m0_ctsn: uart7m0-ctsn { + rockchip,pins = + /* uart7m0_ctsn */ + <2 RK_PC2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m0_rtsn: uart7m0-rtsn { + rockchip,pins = + /* uart7m0_rtsn */ + <2 RK_PC1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m1_xfer: uart7m1-xfer { + rockchip,pins = + /* uart7_rxm1 */ + <3 RK_PC5 4 &pcfg_pull_up>, + /* uart7_txm1 */ + <3 RK_PC4 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m2_xfer: uart7m2-xfer { + rockchip,pins = + /* uart7_rxm2 */ + <4 RK_PA3 4 &pcfg_pull_up>, + /* uart7_txm2 */ + <4 RK_PA2 4 &pcfg_pull_up>; + }; + }; + + uart8 { + /omit-if-no-ref/ + uart8m0_xfer: uart8m0-xfer { + rockchip,pins = + /* uart8_rxm0 */ + <2 RK_PC6 2 &pcfg_pull_up>, + /* uart8_txm0 */ + <2 RK_PC5 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart8m0_ctsn: uart8m0-ctsn { + rockchip,pins = + /* uart8m0_ctsn */ + <2 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8m0_rtsn: uart8m0-rtsn { + rockchip,pins = + /* uart8m0_rtsn */ + <2 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8m1_xfer: uart8m1-xfer { + rockchip,pins = + /* uart8_rxm1 */ + <3 RK_PA0 4 &pcfg_pull_up>, + /* uart8_txm1 */ + <2 RK_PD7 4 &pcfg_pull_up>; + }; + }; + + uart9 { + /omit-if-no-ref/ + uart9m0_xfer: uart9m0-xfer { + rockchip,pins = + /* uart9_rxm0 */ + <2 RK_PA7 3 &pcfg_pull_up>, + /* uart9_txm0 */ + <2 RK_PB0 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart9m0_ctsn: uart9m0-ctsn { + rockchip,pins = + /* uart9m0_ctsn */ + <2 RK_PC4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m0_rtsn: uart9m0-rtsn { + rockchip,pins = + /* uart9m0_rtsn */ + <2 RK_PC3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m1_xfer: uart9m1-xfer { + rockchip,pins = + /* uart9_rxm1 */ + <4 RK_PC6 4 &pcfg_pull_up>, + /* uart9_txm1 */ + <4 RK_PC5 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart9m2_xfer: uart9m2-xfer { + rockchip,pins = + /* uart9_rxm2 */ + <4 RK_PA5 4 &pcfg_pull_up>, + /* uart9_txm2 */ + <4 RK_PA4 4 &pcfg_pull_up>; + }; + }; + + vop { + /omit-if-no-ref/ + vopm0_pins: vopm0-pins { + rockchip,pins = + /* vop_pwmm0 */ + <0 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + vopm1_pins: vopm1-pins { + rockchip,pins = + /* vop_pwmm1 */ + <3 RK_PC4 2 &pcfg_pull_none>; + }; + }; +}; + +/* + * This part is edited handly. + */ +&pinctrl { + spi0-hs { + /omit-if-no-ref/ + spi0m0_pins_hs: spi0m0-pins { + rockchip,pins = + /* spi0_clkm0 */ + <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>, + /* spi0_misom0 */ + <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>, + /* spi0_mosim0 */ + <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m0_cs0_hs: spi0m0-cs0 { + rockchip,pins = + /* spi0_cs0m0 */ + <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m0_cs1_hs: spi0m0-cs1 { + rockchip,pins = + /* spi0_cs1m0 */ + <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m1_pins_hs: spi0m1-pins { + rockchip,pins = + /* spi0_clkm1 */ + <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>, + /* spi0_misom1 */ + <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>, + /* spi0_mosim1 */ + <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m1_cs0_hs: spi0m1-cs0 { + rockchip,pins = + /* spi0_cs0m1 */ + <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi1-hs { + /omit-if-no-ref/ + spi1m0_pins_hs: spi1m0-pins { + rockchip,pins = + /* spi1_clkm0 */ + <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>, + /* spi1_misom0 */ + <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>, + /* spi1_mosim0 */ + <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m0_cs0_hs: spi1m0-cs0 { + rockchip,pins = + /* spi1_cs0m0 */ + <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m0_cs1_hs: spi1m0-cs1 { + rockchip,pins = + /* spi1_cs1m0 */ + <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m1_pins_hs: spi1m1-pins { + rockchip,pins = + /* spi1_clkm1 */ + <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>, + /* spi1_misom1 */ + <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>, + /* spi1_mosim1 */ + <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m1_cs0_hs: spi1m1-cs0 { + rockchip,pins = + /* spi1_cs0m1 */ + <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi2-hs { + /omit-if-no-ref/ + spi2m0_pins_hs: spi2m0-pins { + rockchip,pins = + /* spi2_clkm0 */ + <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>, + /* spi2_misom0 */ + <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>, + /* spi2_mosim0 */ + <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m0_cs0_hs: spi2m0-cs0 { + rockchip,pins = + /* spi2_cs0m0 */ + <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m0_cs1_hs: spi2m0-cs1 { + rockchip,pins = + /* spi2_cs1m0 */ + <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_pins_hs: spi2m1-pins { + rockchip,pins = + /* spi2_clkm1 */ + <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>, + /* spi2_misom1 */ + <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>, + /* spi2_mosim1 */ + <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_cs0_hs: spi2m1-cs0 { + rockchip,pins = + /* spi2_cs0m1 */ + <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_cs1_hs: spi2m1-cs1 { + rockchip,pins = + /* spi2_cs1m1 */ + <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi3-hs { + /omit-if-no-ref/ + spi3m0_pins_hs: spi3m0-pins { + rockchip,pins = + /* spi3_clkm0 */ + <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>, + /* spi3_misom0 */ + <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>, + /* spi3_mosim0 */ + <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m0_cs0_hs: spi3m0-cs0 { + rockchip,pins = + /* spi3_cs0m0 */ + <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m0_cs1_hs: spi3m0-cs1 { + rockchip,pins = + /* spi3_cs1m0 */ + <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m1_pins_hs: spi3m1-pins { + rockchip,pins = + /* spi3_clkm1 */ + <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>, + /* spi3_misom1 */ + <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>, + /* spi3_mosim1 */ + <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m1_cs0_hs: spi3m1-cs0 { + rockchip,pins = + /* spi3_cs0m1 */ + <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m1_cs1_hs: spi3m1-cs1 { + rockchip,pins = + /* spi3_cs1m1 */ + <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>; + }; + }; + + gmac-txd-level3 { + /omit-if-no-ref/ + gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 { + rockchip,pins = + /* gmac0_txd0 */ + <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>, + /* gmac0_txd1 */ + <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>, + /* gmac0_txen */ + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 { + rockchip,pins = + /* gmac0_rxd2 */ + <2 RK_PA3 2 &pcfg_pull_none>, + /* gmac0_rxd3 */ + <2 RK_PA4 2 &pcfg_pull_none>, + /* gmac0_txd2 */ + <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>, + /* gmac0_txd3 */ + <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 { + rockchip,pins = + /* gmac1_txd0m0 */ + <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txd1m0 */ + <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txenm0 */ + <3 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 { + rockchip,pins = + /* gmac1_rxd2m0 */ + <3 RK_PA4 3 &pcfg_pull_none>, + /* gmac1_rxd3m0 */ + <3 RK_PA5 3 &pcfg_pull_none>, + /* gmac1_txd2m0 */ + <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txd3m0 */ + <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 { + rockchip,pins = + /* gmac1_txd0m1 */ + <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txd1m1 */ + <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txenm1 */ + <4 RK_PA6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 { + rockchip,pins = + /* gmac1_rxd2m1 */ + <4 RK_PA1 3 &pcfg_pull_none>, + /* gmac1_rxd3m1 */ + <4 RK_PA2 3 &pcfg_pull_none>, + /* gmac1_txd2m1 */ + <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>, + /* gmac1_txd3m1 */ + <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>; + }; + }; + + gmac-txc-level2 { + /omit-if-no-ref/ + gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 { + rockchip,pins = + /* gmac0_rxclk */ + <2 RK_PA5 2 &pcfg_pull_none>, + /* gmac0_txclk */ + <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 { + rockchip,pins = + /* gmac1_rxclkm0 */ + <3 RK_PA7 3 &pcfg_pull_none>, + /* gmac1_txclkm0 */ + <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 { + rockchip,pins = + /* gmac1_rxclkm1 */ + <4 RK_PA3 3 &pcfg_pull_none>, + /* gmac1_txclkm1 */ + <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi new file mode 100644 index 000000000000..d225e6a45d5c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/clock/rk3568-cru.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3568"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&scmi_clk 0>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000 900000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000 900000 1150000>; + opp-suspend; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <975000 975000 1150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1050000 1050000 1150000>; + }; + + opp-1992000000 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000 1150000 1150000>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + arm,no-tick-in-suspend; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + pinctrl-0 = <&clk32k_out0>; + pinctrl-names = "default"; + #clock-cells = <0>; + }; + + sram@10f000 { + compatible = "mmio-sram"; + reg = <0x0 0x0010f000 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0010f000 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + gic: interrupt-controller@fd400000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ + <0x0 0xfd460000 0 0x80000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + mbi-alias = <0x0 0xfd100000>; + mbi-ranges = <296 24>; + msi-controller; + }; + + pmugrf: syscon@fdc20000 { + compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc20000 0x0 0x10000>; + }; + + grf: syscon@fdc60000 { + compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc60000 0x0 0x10000>; + }; + + pmucru: clock-controller@fdd00000 { + compatible = "rockchip,rk3568-pmucru"; + reg = <0x0 0xfdd00000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@fdd20000 { + compatible = "rockchip,rk3568-cru"; + reg = <0x0 0xfdd20000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@fdd40000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfdd40000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@fdd50000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfdd50000 0x0 0x100>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + pinctrl-0 = <&uart0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + sdmmc2: mmc@fe000000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe000000 0x0 0x4000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, + <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC2>; + reset-names = "reset"; + status = "disabled"; + }; + + sdmmc0: mmc@fe2b0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, + <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC0>; + reset-names = "reset"; + status = "disabled"; + }; + + sdmmc1: mmc@fe2c0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, + <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC1>; + reset-names = "reset"; + status = "disabled"; + }; + + sdhci: mmc@fe310000 { + compatible = "rockchip,rk3568-dwcmshc"; + reg = <0x0 0xfe310000 0x0 0x10000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>; + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, + <&cru TCLK_EMMC>; + clock-names = "core", "bus", "axi", "block", "timer"; + status = "disabled"; + }; + + dmac0: dmac@fe530000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe530000 0x0 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dmac@fe550000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe550000 0x0 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + i2c1: i2c@fe5a0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5a0000 0x0 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c1_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@fe5b0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5b0000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c2m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@fe5c0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5c0000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@fe5d0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5d0000 0x0 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c4m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@fe5e0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5e0000 0x0 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c5m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@fe650000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe650000 0x0 0x100>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + pinctrl-0 = <&uart1m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@fe660000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe660000 0x0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 4>, <&dmac0 5>; + pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@fe670000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe670000 0x0 0x100>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + pinctrl-0 = <&uart3m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@fe680000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe680000 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + pinctrl-0 = <&uart4m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@fe690000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe690000 0x0 0x100>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + pinctrl-0 = <&uart5m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart6: serial@fe6a0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6a0000 0x0 0x100>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 12>, <&dmac0 13>; + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart7: serial@fe6b0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6b0000 0x0 0x100>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 14>, <&dmac0 15>; + pinctrl-0 = <&uart7m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart8: serial@fe6c0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6c0000 0x0 0x100>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 16>, <&dmac0 17>; + pinctrl-0 = <&uart8m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart9: serial@fe6d0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6d0000 0x0 0x100>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 18>, <&dmac0 19>; + pinctrl-0 = <&uart9m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3568-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@fdd60000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfdd60000 0x0 0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@fe740000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe740000 0x0 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@fe750000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe750000 0x0 0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@fe760000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe760000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@fe770000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe770000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rk3568-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi new file mode 100644 index 000000000000..5c645437b507 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +&pinctrl { + /omit-if-no-ref/ + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + /omit-if-no-ref/ + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + /omit-if-no-ref/ + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_0: pcfg-pull-none-drv-level-0 { + bias-disable; + drive-strength = <0>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_1: pcfg-pull-none-drv-level-1 { + bias-disable; + drive-strength = <1>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_2: pcfg-pull-none-drv-level-2 { + bias-disable; + drive-strength = <2>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_3: pcfg-pull-none-drv-level-3 { + bias-disable; + drive-strength = <3>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_4: pcfg-pull-none-drv-level-4 { + bias-disable; + drive-strength = <4>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_5: pcfg-pull-none-drv-level-5 { + bias-disable; + drive-strength = <5>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_6: pcfg-pull-none-drv-level-6 { + bias-disable; + drive-strength = <6>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_7: pcfg-pull-none-drv-level-7 { + bias-disable; + drive-strength = <7>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_8: pcfg-pull-none-drv-level-8 { + bias-disable; + drive-strength = <8>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_9: pcfg-pull-none-drv-level-9 { + bias-disable; + drive-strength = <9>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_10: pcfg-pull-none-drv-level-10 { + bias-disable; + drive-strength = <10>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_11: pcfg-pull-none-drv-level-11 { + bias-disable; + drive-strength = <11>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_12: pcfg-pull-none-drv-level-12 { + bias-disable; + drive-strength = <12>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_13: pcfg-pull-none-drv-level-13 { + bias-disable; + drive-strength = <13>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_14: pcfg-pull-none-drv-level-14 { + bias-disable; + drive-strength = <14>; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_15: pcfg-pull-none-drv-level-15 { + bias-disable; + drive-strength = <15>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_0: pcfg-pull-up-drv-level-0 { + bias-pull-up; + drive-strength = <0>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_1: pcfg-pull-up-drv-level-1 { + bias-pull-up; + drive-strength = <1>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_2: pcfg-pull-up-drv-level-2 { + bias-pull-up; + drive-strength = <2>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_3: pcfg-pull-up-drv-level-3 { + bias-pull-up; + drive-strength = <3>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_4: pcfg-pull-up-drv-level-4 { + bias-pull-up; + drive-strength = <4>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_5: pcfg-pull-up-drv-level-5 { + bias-pull-up; + drive-strength = <5>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_6: pcfg-pull-up-drv-level-6 { + bias-pull-up; + drive-strength = <6>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_7: pcfg-pull-up-drv-level-7 { + bias-pull-up; + drive-strength = <7>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_8: pcfg-pull-up-drv-level-8 { + bias-pull-up; + drive-strength = <8>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_9: pcfg-pull-up-drv-level-9 { + bias-pull-up; + drive-strength = <9>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_10: pcfg-pull-up-drv-level-10 { + bias-pull-up; + drive-strength = <10>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_11: pcfg-pull-up-drv-level-11 { + bias-pull-up; + drive-strength = <11>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_12: pcfg-pull-up-drv-level-12 { + bias-pull-up; + drive-strength = <12>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_13: pcfg-pull-up-drv-level-13 { + bias-pull-up; + drive-strength = <13>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_14: pcfg-pull-up-drv-level-14 { + bias-pull-up; + drive-strength = <14>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_drv_level_15: pcfg-pull-up-drv-level-15 { + bias-pull-up; + drive-strength = <15>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_0: pcfg-pull-down-drv-level-0 { + bias-pull-down; + drive-strength = <0>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_1: pcfg-pull-down-drv-level-1 { + bias-pull-down; + drive-strength = <1>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_2: pcfg-pull-down-drv-level-2 { + bias-pull-down; + drive-strength = <2>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_3: pcfg-pull-down-drv-level-3 { + bias-pull-down; + drive-strength = <3>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_4: pcfg-pull-down-drv-level-4 { + bias-pull-down; + drive-strength = <4>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_5: pcfg-pull-down-drv-level-5 { + bias-pull-down; + drive-strength = <5>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_6: pcfg-pull-down-drv-level-6 { + bias-pull-down; + drive-strength = <6>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_7: pcfg-pull-down-drv-level-7 { + bias-pull-down; + drive-strength = <7>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_8: pcfg-pull-down-drv-level-8 { + bias-pull-down; + drive-strength = <8>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_9: pcfg-pull-down-drv-level-9 { + bias-pull-down; + drive-strength = <9>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_10: pcfg-pull-down-drv-level-10 { + bias-pull-down; + drive-strength = <10>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_11: pcfg-pull-down-drv-level-11 { + bias-pull-down; + drive-strength = <11>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_12: pcfg-pull-down-drv-level-12 { + bias-pull-down; + drive-strength = <12>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_13: pcfg-pull-down-drv-level-13 { + bias-pull-down; + drive-strength = <13>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_14: pcfg-pull-down-drv-level-14 { + bias-pull-down; + drive-strength = <14>; + }; + + /omit-if-no-ref/ + pcfg_pull_down_drv_level_15: pcfg-pull-down-drv-level-15 { + bias-pull-down; + drive-strength = <15>; + }; + + /omit-if-no-ref/ + pcfg_pull_up_smt: pcfg-pull-up-smt { + bias-pull-up; + input-schmitt-enable; + }; + + /omit-if-no-ref/ + pcfg_pull_down_smt: pcfg-pull-down-smt { + bias-pull-down; + input-schmitt-enable; + }; + + /omit-if-no-ref/ + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + /omit-if-no-ref/ + pcfg_pull_none_drv_level_0_smt: pcfg-pull-none-drv-level-0-smt { + bias-disable; + drive-strength = <0>; + input-schmitt-enable; + }; + + /omit-if-no-ref/ + pcfg_output_high: pcfg-output-high { + output-high; + }; + + /omit-if-no-ref/ + pcfg_output_low: pcfg-output-low { + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index ca59d1f711f8..02c3fdf9cc46 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -5,6 +5,17 @@ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy-ti.h> + +/ { + serdes_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { oc_sram: sram@70000000 { compatible = "mmio-sram"; @@ -13,8 +24,30 @@ #size-cells = <1>; ranges = <0x0 0x00 0x70000000 0x200000>; - atf-sram@0 { - reg = <0x0 0x1a000>; + tfa-sram@1c0000 { + reg = <0x1c0000 0x20000>; + }; + + dmsc-sram@1e0000 { + reg = <0x1e0000 0x1c000>; + }; + + sproxy-sram@1fc000 { + reg = <0x1fc000 0x4000>; + }; + }; + + main_conf: syscon@43000000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x0 0x43000000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x43000000 0x20000>; + + serdes_ln_ctrl: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */ }; }; @@ -189,8 +222,6 @@ main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -202,8 +233,6 @@ main_uart1: serial@2810000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -215,8 +244,6 @@ main_uart2: serial@2820000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -228,8 +255,6 @@ main_uart3: serial@2830000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -241,8 +266,6 @@ main_uart4: serial@2840000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -254,8 +277,6 @@ main_uart5: serial@2850000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -267,8 +288,6 @@ main_uart6: serial@2860000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -489,7 +508,8 @@ ti,mac-only; label = "port1"; phys = <&phy_gmii_sel 1>; - mac-address = [00 00 de ad be ef]; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&main_conf 0x200>; }; cpsw_port2: port@2 { @@ -497,7 +517,7 @@ ti,mac-only; label = "port2"; phys = <&phy_gmii_sel 2>; - mac-address = [00 01 de ad be ef]; + mac-address = [00 00 00 00 00 00]; }; }; @@ -673,4 +693,170 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; }; + + main_r5fss0: r5fss@78000000 { + compatible = "ti,am64-r5fss"; + ti,cluster-mode = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x78000000 0x00 0x78000000 0x10000>, + <0x78100000 0x00 0x78100000 0x10000>, + <0x78200000 0x00 0x78200000 0x08000>, + <0x78300000 0x00 0x78300000 0x08000>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@78000000 { + compatible = "ti,am64-r5f"; + reg = <0x78000000 0x00010000>, + <0x78100000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <121>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 121 1>; + firmware-name = "am64-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@78200000 { + compatible = "ti,am64-r5f"; + reg = <0x78200000 0x00008000>, + <0x78300000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <122>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 122 1>; + firmware-name = "am64-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@78400000 { + compatible = "ti,am64-r5fss"; + ti,cluster-mode = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x78400000 0x00 0x78400000 0x10000>, + <0x78500000 0x00 0x78500000 0x10000>, + <0x78600000 0x00 0x78600000 0x08000>, + <0x78700000 0x00 0x78700000 0x08000>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@78400000 { + compatible = "ti,am64-r5f"; + reg = <0x78400000 0x00010000>, + <0x78500000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <123>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 123 1>; + firmware-name = "am64-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@78600000 { + compatible = "ti,am64-r5f"; + reg = <0x78600000 0x00008000>, + <0x78700000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <124>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 124 1>; + firmware-name = "am64-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + serdes_wiz0: wiz@f000000 { + compatible = "ti,am64-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <1>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x0f000000 0x0 0x0f000000 0x00010000>; + + assigned-clocks = <&k3_clks 162 1>; + assigned-clock-parents = <&k3_clks 162 5>; + + serdes0: serdes@f000000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x0f000000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 162 1>, + <&k3_clks 162 1>, + <&k3_clks 162 1>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + }; + }; + + pcie0_rc: pcie@f102000 { + compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x0f102000 0x00 0x1000>, + <0x00 0x0f100000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x68000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&main_conf 0x4070>; + max-link-speed = <2>; + num-lanes = <1>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + cdns,no-bar-match-nbits = <64>; + vendor-id = <0x104c>; + device-id = <0xb010>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>, + <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>; + }; + + pcie0_ep: pcie-ep@f102000 { + compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x0f102000 0x00 0x1000>, + <0x00 0x0f100000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x68000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&main_conf 0x4070>; + max-link-speed = <2>; + num-lanes = <1>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "fck"; + max-functions = /bits/ 8 <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index deb19ae5e168..59cc58f7d0c8 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -9,8 +9,6 @@ mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -22,8 +20,6 @@ mcu_uart1: serial@4a10000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -87,7 +83,7 @@ }; mcu_gpio0: gpio@4201000 { - compatible = "ti,am64-gpio", "keystone-gpio"; + compatible = "ti,am64-gpio", "ti,keystone-gpio"; reg = <0x0 0x4201000 0x0 0x100>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index dad0efa961ed..030712221188 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> @@ -36,6 +38,60 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; evm_12v0: fixedregulator-evm12v0 { @@ -334,7 +390,7 @@ &main_spi0 { pinctrl-names = "default"; pinctrl-0 = <&main_spi0_pins_default>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; eeprom@0 { compatible = "microchip,93lc46b"; reg = <0>; @@ -466,3 +522,55 @@ &mailbox0_cluster7 { status = "disabled"; }; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_PCIE0>; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + +&pcie0_rc { + reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie0_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 8424cd071955..d3aa2901e6fd 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include "k3-am642.dtsi" @@ -35,6 +37,60 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; vusb_main: fixed-regulator-vusb-main5v0 { @@ -85,6 +141,12 @@ >; }; + main_usb0_pins_default: main-usb0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ @@ -235,6 +297,33 @@ disable-wp; }; +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&serdes0 { + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "host"; + maximum-speed = "super-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&mdio1_pins_default @@ -332,3 +421,35 @@ &mailbox0_cluster7 { status = "disabled"; }; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index de763ca9251c..1008e9162ba2 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -555,6 +555,7 @@ pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + no-1-8-v; }; &usb0 { @@ -575,7 +576,7 @@ #address-cells = <1>; #size-cells= <0>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &tscadc0 { @@ -653,3 +654,63 @@ &pcie1_ep { status = "disabled"; }; + +&mailbox0_cluster0 { + status = "disabled"; +}; + +&mailbox0_cluster1 { + status = "disabled"; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; + +&icssg2_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 6cd3131eb9ff..ba4e5d3e1ed7 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -84,8 +84,6 @@ main_uart0: serial@2800000 { compatible = "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -95,8 +93,6 @@ main_uart1: serial@2810000 { compatible = "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; @@ -105,8 +101,6 @@ main_uart2: serial@2820000 { compatible = "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; @@ -301,7 +295,6 @@ ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; - no-1-8-v; }; scm_conf: scm-conf@100000 { @@ -1053,6 +1046,16 @@ reg-names = "iram", "control", "debug"; firmware-name = "am65x-txpru0_1-fw"; }; + + icssg0_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 62 3>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; }; icssg1: icssg@b100000 { @@ -1184,6 +1187,16 @@ reg-names = "iram", "control", "debug"; firmware-name = "am65x-txpru1_1-fw"; }; + + icssg1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 63 3>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; }; icssg2: icssg@b200000 { @@ -1315,5 +1328,15 @@ reg-names = "iram", "control", "debug"; firmware-name = "am65x-txpru2_1-fw"; }; + + icssg2_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 64 3>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index f5b8ef2f5f77..c93ff1520a0e 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -23,8 +23,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 7cb864b4d74a..9d21cdf6fce8 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -50,8 +50,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,am654-uart"; reg = <0x42300000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts index 4f7e3f2a6265..94bb5dd39122 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts @@ -59,3 +59,8 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; }; + +&mcu_r5fss0 { + /* lock-step mode not supported on this board */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index eddb2ffb93ca..cfbcebfa37c1 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -85,6 +85,38 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; + + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_io: fixedregulator-vcc3v3io { + /* Output of TPS54334 */ + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&evm_12v0>; + }; + + vdd_mmc1_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc3v3_io>; + gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; + }; }; &wkup_pmx0 { @@ -136,7 +168,7 @@ AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ - AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ + AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ >; }; @@ -299,7 +331,7 @@ pinctrl-0 = <&main_spi0_pins_default>; #address-cells = <1>; #size-cells= <0>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; flash@0{ compatible = "jedec,spi-nor"; @@ -327,6 +359,7 @@ * disable sdhci1 */ &sdhci1 { + vmmc-supply = <&vdd_mmc1_sd>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; @@ -506,3 +539,15 @@ &dss { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; + +&icssg2_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index bedd01b7a32c..d14f3c18b65f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -90,7 +90,7 @@ J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 19fea8adbcff..e8a41d09b45f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -301,8 +301,6 @@ main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -314,8 +312,6 @@ main_uart1: serial@2810000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -327,8 +323,6 @@ main_uart2: serial@2820000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -340,8 +334,6 @@ main_uart3: serial@2830000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -353,8 +345,6 @@ main_uart4: serial@2840000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -366,8 +356,6 @@ main_uart5: serial@2850000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -379,8 +367,6 @@ main_uart6: serial@2860000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -392,8 +378,6 @@ main_uart7: serial@2870000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02870000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -405,8 +389,6 @@ main_uart8: serial@2880000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02880000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -418,8 +400,6 @@ main_uart9: serial@2890000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02890000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -683,6 +663,7 @@ "otg"; maximum-speed = "super-speed"; dr_mode = "otg"; + cdns,phyrst-a-enable; }; }; @@ -696,7 +677,6 @@ <149>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <69>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; @@ -714,7 +694,6 @@ <158>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <69>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; @@ -732,7 +711,6 @@ <167>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <69>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; @@ -750,7 +728,6 @@ <176>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <69>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 5663fe3ea466..1044ec6c4b0d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -73,8 +73,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -86,8 +84,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; @@ -117,7 +113,6 @@ interrupts = <103>, <104>, <105>, <106>, <107>, <108>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <85>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; @@ -134,7 +129,6 @@ interrupts = <112>, <113>, <114>, <115>, <116>, <117>; interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; ti,ngpio = <85>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 60764366e22b..8bd02d9e28ad 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> / { chosen { @@ -237,7 +238,7 @@ J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; @@ -358,7 +359,7 @@ }; &serdes3 { - serdes3_usb_link: link@0 { + serdes3_usb_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -635,8 +636,45 @@ status = "disabled"; }; +&cmn_refclk1 { + clock-frequency = <100000000>; +}; + +&wiz0_pll1_refclk { + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz0_refclk_dig { + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_pll1_refclk { + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_refclk_dig { + assigned-clocks = <&wiz1_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_pll1_refclk { + assigned-clocks = <&wiz2_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_refclk_dig { + assigned-clocks = <&wiz2_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + &serdes0 { - serdes0_pcie_link: link@0 { + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz0_pll1_refclk>; + + serdes0_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; @@ -646,7 +684,10 @@ }; &serdes1 { - serdes1_pcie_link: link@0 { + assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz1_pll1_refclk>; + + serdes1_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -656,7 +697,10 @@ }; &serdes2 { - serdes2_pcie_link: link@0 { + assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz2_pll1_refclk>; + + serdes2_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -718,3 +762,11 @@ &dss { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 3bcafe4c1742..cf3482376c1e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -8,6 +8,20 @@ #include <dt-bindings/mux/mux.h> #include <dt-bindings/mux/ti-serdes.h> +/ { + cmn_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + cmn_refclk1: clock-cmnrefclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -338,24 +352,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; - dummy_cmn_refclk: dummy-cmn-refclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - dummy_cmn_refclk1: dummy-cmn-refclk1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - serdes_wiz0: wiz@5000000 { compatible = "ti,j721e-wiz-16g"; #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; @@ -364,21 +366,21 @@ ranges = <0x5000000 0x0 0x5000000 0x10000>; wiz0_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 292 11>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz0_pll0_refclk>; assigned-clock-parents = <&k3_clks 292 11>; }; wiz0_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_pll1_refclk>; assigned-clock-parents = <&k3_clks 292 0>; }; wiz0_refclk_dig: refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; assigned-clock-parents = <&k3_clks 292 11>; @@ -400,10 +402,13 @@ reg = <0x5000000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz0 0>; reset-names = "sierra_reset"; - clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>, + <&wiz0_pll0_refclk>, <&wiz0_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -412,7 +417,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>; assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>; @@ -421,21 +426,21 @@ ranges = <0x5010000 0x0 0x5010000 0x10000>; wiz1_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 293 13>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz1_pll0_refclk>; assigned-clock-parents = <&k3_clks 293 13>; }; wiz1_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 293 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz1_pll1_refclk>; assigned-clock-parents = <&k3_clks 293 0>; }; wiz1_refclk_dig: refclk-dig { - clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz1_refclk_dig>; assigned-clock-parents = <&k3_clks 293 13>; @@ -457,10 +462,13 @@ reg = <0x5010000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz1 0>; reset-names = "sierra_reset"; - clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>, + <&wiz1_pll0_refclk>, <&wiz1_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -469,7 +477,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>; assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>; @@ -478,21 +486,21 @@ ranges = <0x5020000 0x0 0x5020000 0x10000>; wiz2_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 294 11>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz2_pll0_refclk>; assigned-clock-parents = <&k3_clks 294 11>; }; wiz2_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 294 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz2_pll1_refclk>; assigned-clock-parents = <&k3_clks 294 0>; }; wiz2_refclk_dig: refclk-dig { - clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz2_refclk_dig>; assigned-clock-parents = <&k3_clks 294 11>; @@ -514,10 +522,13 @@ reg = <0x5020000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz2 0>; reset-names = "sierra_reset"; - clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>, + <&wiz2_pll0_refclk>, <&wiz2_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -526,7 +537,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>; assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>; @@ -535,21 +546,21 @@ ranges = <0x5030000 0x0 0x5030000 0x10000>; wiz3_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 295 9>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz3_pll0_refclk>; assigned-clock-parents = <&k3_clks 295 9>; }; wiz3_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 295 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz3_pll1_refclk>; assigned-clock-parents = <&k3_clks 295 0>; }; wiz3_refclk_dig: refclk-dig { - clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz3_refclk_dig>; assigned-clock-parents = <&k3_clks 295 9>; @@ -571,10 +582,13 @@ reg = <0x5030000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz3 0>; reset-names = "sierra_reset"; - clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>, + <&wiz3_pll0_refclk>, <&wiz3_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -775,8 +789,6 @@ main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -788,8 +800,6 @@ main_uart1: serial@2810000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -801,8 +811,6 @@ main_uart2: serial@2820000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -814,8 +822,6 @@ main_uart3: serial@2830000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -827,8 +833,6 @@ main_uart4: serial@2840000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -840,8 +844,6 @@ main_uart5: serial@2850000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -853,8 +855,6 @@ main_uart6: serial@2860000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -866,8 +866,6 @@ main_uart7: serial@2870000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02870000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -879,8 +877,6 @@ main_uart8: serial@2880000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02880000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -892,8 +888,6 @@ main_uart9: serial@2890000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02890000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -1794,6 +1788,16 @@ reg-names = "iram", "control", "debug"; firmware-name = "j7-txpru0_1-fw"; }; + + icssg0_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 119 1>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; }; icssg1: icssg@b100000 { @@ -1925,5 +1929,15 @@ reg-names = "iram", "control", "debug"; firmware-name = "j7-txpru1_1-fw"; }; + + icssg1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 120 4>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 5e825e4d0306..d2dceda72fe9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -73,8 +73,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; @@ -86,8 +84,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index bf0620afe117..29a4d9fc1e47 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -68,3 +68,11 @@ &gpio { status = "okay"; }; + +&pwm_mux { + groups = "pwm0_gpio16_grp", "pwm1_gpio17_grp", "pwm2_gpio18_grp", "pwm3_gpio19_grp"; +}; + +&pwm { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 17934fd9a14c..4b4231ff43cf 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -432,6 +432,15 @@ reg = <0 0x28330000 0 0x1000>; status = "disabled"; }; + + pwm: pwm@241c0000 { + compatible = "toshiba,visconti-pwm"; + reg = <0 0x241c0000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_mux>; + #pwm-cells = <2>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi index 34de00015a7f..a480c6ba5f5d 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi @@ -90,4 +90,9 @@ groups = "i2c8_grp"; bias-pull-up; }; + + pwm_mux: pwm_mux { + function = "pwm"; + }; + }; diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h index 4c23eefed5f3..eb91a6c05b71 100644 --- a/include/dt-bindings/mailbox/qcom-ipcc.h +++ b/include/dt-bindings/mailbox/qcom-ipcc.h @@ -29,5 +29,6 @@ #define IPCC_CLIENT_PCIE1 14 #define IPCC_CLIENT_PCIE2 15 #define IPCC_CLIENT_SPSS 16 +#define IPCC_CLIENT_WPSS 24 #endif diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h index 0359bfdc9119..93064c750c8c 100644 --- a/include/dt-bindings/pinctrl/hisi.h +++ b/include/dt-bindings/pinctrl/hisi.h @@ -1,7 +1,7 @@ /* * This header provides constants for hisilicon pinctrl bindings. * - * Copyright (c) 2015 Hisilicon Limited. + * Copyright (c) 2015 HiSilicon Limited. * Copyright (c) 2015 Linaro Limited. * * This program is free software; you can redistribute it and/or modify |